| 1 |
/* |
| 2 |
* Copyright (c) 2004-2007 Reyk Floeter <[email protected]> |
| 3 |
* Copyright (c) 2006-2007 Nick Kossifidis <[email protected]> |
| 4 |
* |
| 5 |
* Permission to use, copy, modify, and distribute this software for any |
| 6 |
* purpose with or without fee is hereby granted, provided that the above |
| 7 |
* copyright notice and this permission notice appear in all copies. |
| 8 |
* |
| 9 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 10 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 11 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 12 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 13 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 14 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 15 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 16 |
*/ |
| 17 |
|
| 18 |
#ifndef _ATH5K_H |
| 19 |
#define _ATH5K_H |
| 20 |
|
| 21 |
/* TODO: Clean up channel debugging (doesn't work anyway) and start |
| 22 |
* working on reg. control code using all available eeprom information |
| 23 |
* (rev. engineering needed) */ |
| 24 |
#define CHAN_DEBUG 0 |
| 25 |
|
| 26 |
#include <linux/io.h> |
| 27 |
#include <linux/interrupt.h> |
| 28 |
#include <linux/types.h> |
| 29 |
#include <linux/average.h> |
| 30 |
#include <linux/leds.h> |
| 31 |
#include <net/mac80211.h> |
| 32 |
#include <net/cfg80211.h> |
| 33 |
|
| 34 |
/* RX/TX descriptor hw structs |
| 35 |
* TODO: Driver part should only see sw structs */ |
| 36 |
#include "desc.h" |
| 37 |
|
| 38 |
/* EEPROM structs/offsets |
| 39 |
* TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) |
| 40 |
* and clean up common bits, then introduce set/get functions in eeprom.c */ |
| 41 |
#include "eeprom.h" |
| 42 |
#include "debug.h" |
| 43 |
#include "../ath.h" |
| 44 |
#include "ani.h" |
| 45 |
|
| 46 |
/* PCI IDs */ |
| 47 |
#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ |
| 48 |
#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ |
| 49 |
#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ |
| 50 |
#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ |
| 51 |
#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ |
| 52 |
#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ |
| 53 |
#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ |
| 54 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ |
| 55 |
#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ |
| 56 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ |
| 57 |
#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ |
| 58 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ |
| 59 |
#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ |
| 60 |
#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ |
| 61 |
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ |
| 62 |
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ |
| 63 |
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ |
| 64 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ |
| 65 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ |
| 66 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ |
| 67 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ |
| 68 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ |
| 69 |
#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ |
| 70 |
#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ |
| 71 |
#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ |
| 72 |
#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ |
| 73 |
#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ |
| 74 |
#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ |
| 75 |
|
| 76 |
/****************************\ |
| 77 |
GENERIC DRIVER DEFINITIONS |
| 78 |
\****************************/ |
| 79 |
|
| 80 |
#define ATH5K_PRINTF(fmt, ...) \ |
| 81 |
pr_warn("%s: " fmt, __func__, ##__VA_ARGS__) |
| 82 |
|
| 83 |
void __printf(3, 4) |
| 84 |
_ath5k_printk(const struct ath5k_hw *ah, const char *level, |
| 85 |
const char *fmt, ...); |
| 86 |
|
| 87 |
#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ |
| 88 |
_ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__) |
| 89 |
|
| 90 |
#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) \ |
| 91 |
do { \ |
| 92 |
if (net_ratelimit()) \ |
| 93 |
ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ |
| 94 |
} while (0) |
| 95 |
|
| 96 |
#define ATH5K_INFO(_sc, _fmt, ...) \ |
| 97 |
ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) |
| 98 |
|
| 99 |
#define ATH5K_WARN(_sc, _fmt, ...) \ |
| 100 |
ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) |
| 101 |
|
| 102 |
#define ATH5K_ERR(_sc, _fmt, ...) \ |
| 103 |
ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) |
| 104 |
|
| 105 |
/* |
| 106 |
* AR5K REGISTER ACCESS |
| 107 |
*/ |
| 108 |
|
| 109 |
/* Some macros to read/write fields */ |
| 110 |
|
| 111 |
/* First shift, then mask */ |
| 112 |
#define AR5K_REG_SM(_val, _flags) \ |
| 113 |
(((_val) << _flags##_S) & (_flags)) |
| 114 |
|
| 115 |
/* First mask, then shift */ |
| 116 |
#define AR5K_REG_MS(_val, _flags) \ |
| 117 |
(((_val) & (_flags)) >> _flags##_S) |
| 118 |
|
| 119 |
/* Some registers can hold multiple values of interest. For this |
| 120 |
* reason when we want to write to these registers we must first |
| 121 |
* retrieve the values which we do not want to clear (lets call this |
| 122 |
* old_data) and then set the register with this and our new_value: |
| 123 |
* ( old_data | new_value) */ |
| 124 |
#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ |
| 125 |
ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ |
| 126 |
(((_val) << _flags##_S) & (_flags)), _reg) |
| 127 |
|
| 128 |
#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ |
| 129 |
ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ |
| 130 |
(_mask)) | (_flags), _reg) |
| 131 |
|
| 132 |
#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ |
| 133 |
ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) |
| 134 |
|
| 135 |
#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ |
| 136 |
ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) |
| 137 |
|
| 138 |
/* Access QCU registers per queue */ |
| 139 |
#define AR5K_REG_READ_Q(ah, _reg, _queue) \ |
| 140 |
(ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ |
| 141 |
|
| 142 |
#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ |
| 143 |
ath5k_hw_reg_write(ah, (1 << _queue), _reg) |
| 144 |
|
| 145 |
#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ |
| 146 |
_reg |= 1 << _queue; \ |
| 147 |
} while (0) |
| 148 |
|
| 149 |
#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ |
| 150 |
_reg &= ~(1 << _queue); \ |
| 151 |
} while (0) |
| 152 |
|
| 153 |
/* Used while writing initvals */ |
| 154 |
#define AR5K_REG_WAIT(_i) do { \ |
| 155 |
if (_i % 64) \ |
| 156 |
udelay(1); \ |
| 157 |
} while (0) |
| 158 |
|
| 159 |
/* |
| 160 |
* Some tunable values (these should be changeable by the user) |
| 161 |
* TODO: Make use of them and add more options OR use debug/configfs |
| 162 |
*/ |
| 163 |
#define AR5K_TUNE_DMA_BEACON_RESP 2 |
| 164 |
#define AR5K_TUNE_SW_BEACON_RESP 10 |
| 165 |
#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 |
| 166 |
#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 |
| 167 |
#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1) |
| 168 |
#define AR5K_TUNE_REGISTER_TIMEOUT 20000 |
| 169 |
/* Register for RSSI threshold has a mask of 0xff, so 255 seems to |
| 170 |
* be the max value. */ |
| 171 |
#define AR5K_TUNE_RSSI_THRES 129 |
| 172 |
/* This must be set when setting the RSSI threshold otherwise it can |
| 173 |
* prevent a reset. If AR5K_RSSI_THR is read after writing to it |
| 174 |
* the BMISS_THRES will be seen as 0, seems hardware doesn't keep |
| 175 |
* track of it. Max value depends on hardware. For AR5210 this is just 7. |
| 176 |
* For AR5211+ this seems to be up to 255. */ |
| 177 |
#define AR5K_TUNE_BMISS_THRES 7 |
| 178 |
#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 |
| 179 |
#define AR5K_TUNE_BEACON_INTERVAL 100 |
| 180 |
#define AR5K_TUNE_AIFS 2 |
| 181 |
#define AR5K_TUNE_AIFS_11B 2 |
| 182 |
#define AR5K_TUNE_AIFS_XR 0 |
| 183 |
#define AR5K_TUNE_CWMIN 15 |
| 184 |
#define AR5K_TUNE_CWMIN_11B 31 |
| 185 |
#define AR5K_TUNE_CWMIN_XR 3 |
| 186 |
#define AR5K_TUNE_CWMAX 1023 |
| 187 |
#define AR5K_TUNE_CWMAX_11B 1023 |
| 188 |
#define AR5K_TUNE_CWMAX_XR 7 |
| 189 |
#define AR5K_TUNE_NOISE_FLOOR -72 |
| 190 |
#define AR5K_TUNE_CCA_MAX_GOOD_VALUE -95 |
| 191 |
#define AR5K_TUNE_MAX_TXPOWER 63 |
| 192 |
#define AR5K_TUNE_DEFAULT_TXPOWER 25 |
| 193 |
#define AR5K_TUNE_TPC_TXPOWER false |
| 194 |
#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */ |
| 195 |
#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */ |
| 196 |
#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */ |
| 197 |
#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */ |
| 198 |
|
| 199 |
#define AR5K_INIT_CARR_SENSE_EN 1 |
| 200 |
|
| 201 |
/*Swap RX/TX Descriptor for big endian archs*/ |
| 202 |
#if defined(__BIG_ENDIAN) |
| 203 |
#define AR5K_INIT_CFG ( \ |
| 204 |
AR5K_CFG_SWTD | AR5K_CFG_SWRD \ |
| 205 |
) |
| 206 |
#else |
| 207 |
#define AR5K_INIT_CFG 0x00000000 |
| 208 |
#endif |
| 209 |
|
| 210 |
/* Initial values */ |
| 211 |
#define AR5K_INIT_CYCRSSI_THR1 2 |
| 212 |
|
| 213 |
/* Tx retry limit defaults from standard */ |
| 214 |
#define AR5K_INIT_RETRY_SHORT 7 |
| 215 |
#define AR5K_INIT_RETRY_LONG 4 |
| 216 |
|
| 217 |
/* Slot time */ |
| 218 |
#define AR5K_INIT_SLOT_TIME_TURBO 6 |
| 219 |
#define AR5K_INIT_SLOT_TIME_DEFAULT 9 |
| 220 |
#define AR5K_INIT_SLOT_TIME_HALF_RATE 13 |
| 221 |
#define AR5K_INIT_SLOT_TIME_QUARTER_RATE 21 |
| 222 |
#define AR5K_INIT_SLOT_TIME_B 20 |
| 223 |
#define AR5K_SLOT_TIME_MAX 0xffff |
| 224 |
|
| 225 |
/* SIFS */ |
| 226 |
#define AR5K_INIT_SIFS_TURBO 6 |
| 227 |
#define AR5K_INIT_SIFS_DEFAULT_BG 10 |
| 228 |
#define AR5K_INIT_SIFS_DEFAULT_A 16 |
| 229 |
#define AR5K_INIT_SIFS_HALF_RATE 32 |
| 230 |
#define AR5K_INIT_SIFS_QUARTER_RATE 64 |
| 231 |
|
| 232 |
/* Used to calculate tx time for non 5/10/40MHz |
| 233 |
* operation */ |
| 234 |
/* It's preamble time + signal time (16 + 4) */ |
| 235 |
#define AR5K_INIT_OFDM_PREAMPLE_TIME 20 |
| 236 |
/* Preamble time for 40MHz (turbo) operation (min ?) */ |
| 237 |
#define AR5K_INIT_OFDM_PREAMBLE_TIME_MIN 14 |
| 238 |
#define AR5K_INIT_OFDM_SYMBOL_TIME 4 |
| 239 |
#define AR5K_INIT_OFDM_PLCP_BITS 22 |
| 240 |
|
| 241 |
/* Rx latency for 5 and 10MHz operation (max ?) */ |
| 242 |
#define AR5K_INIT_RX_LAT_MAX 63 |
| 243 |
/* Tx latencies from initvals (5212 only but no problem |
| 244 |
* because we only tweak them on 5212) */ |
| 245 |
#define AR5K_INIT_TX_LAT_A 54 |
| 246 |
#define AR5K_INIT_TX_LAT_BG 384 |
| 247 |
/* Tx latency for 40MHz (turbo) operation (min ?) */ |
| 248 |
#define AR5K_INIT_TX_LAT_MIN 32 |
| 249 |
/* Default Tx/Rx latencies (same for 5211)*/ |
| 250 |
#define AR5K_INIT_TX_LATENCY_5210 54 |
| 251 |
#define AR5K_INIT_RX_LATENCY_5210 29 |
| 252 |
|
| 253 |
/* Tx frame to Tx data start delay */ |
| 254 |
#define AR5K_INIT_TXF2TXD_START_DEFAULT 14 |
| 255 |
#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ 12 |
| 256 |
#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ 13 |
| 257 |
|
| 258 |
/* We need to increase PHY switch and agc settling time |
| 259 |
* on turbo mode */ |
| 260 |
#define AR5K_SWITCH_SETTLING 5760 |
| 261 |
#define AR5K_SWITCH_SETTLING_TURBO 7168 |
| 262 |
|
| 263 |
#define AR5K_AGC_SETTLING 28 |
| 264 |
/* 38 on 5210 but shouldn't matter */ |
| 265 |
#define AR5K_AGC_SETTLING_TURBO 37 |
| 266 |
|
| 267 |
|
| 268 |
|
| 269 |
/*****************************\ |
| 270 |
* GENERIC CHIPSET DEFINITIONS * |
| 271 |
\*****************************/ |
| 272 |
|
| 273 |
/** |
| 274 |
* enum ath5k_version - MAC Chips |
| 275 |
* @AR5K_AR5210: AR5210 (Crete) |
| 276 |
* @AR5K_AR5211: AR5211 (Oahu/Maui) |
| 277 |
* @AR5K_AR5212: AR5212 (Venice) and newer |
| 278 |
*/ |
| 279 |
enum ath5k_version { |
| 280 |
AR5K_AR5210 = 0, |
| 281 |
AR5K_AR5211 = 1, |
| 282 |
AR5K_AR5212 = 2, |
| 283 |
}; |
| 284 |
|
| 285 |
/** |
| 286 |
* enum ath5k_radio - PHY Chips |
| 287 |
* @AR5K_RF5110: RF5110 (Fez) |
| 288 |
* @AR5K_RF5111: RF5111 (Sombrero) |
| 289 |
* @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2) |
| 290 |
* @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite) |
| 291 |
* @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor) |
| 292 |
* @AR5K_RF2316: RF2315/2316 (Cobra SoC) |
| 293 |
* @AR5K_RF2317: RF2317 (Spider SoC) |
| 294 |
* @AR5K_RF2425: RF2425/2417 (Swan/Nalla) |
| 295 |
*/ |
| 296 |
enum ath5k_radio { |
| 297 |
AR5K_RF5110 = 0, |
| 298 |
AR5K_RF5111 = 1, |
| 299 |
AR5K_RF5112 = 2, |
| 300 |
AR5K_RF2413 = 3, |
| 301 |
AR5K_RF5413 = 4, |
| 302 |
AR5K_RF2316 = 5, |
| 303 |
AR5K_RF2317 = 6, |
| 304 |
AR5K_RF2425 = 7, |
| 305 |
}; |
| 306 |
|
| 307 |
/* |
| 308 |
* Common silicon revision/version values |
| 309 |
*/ |
| 310 |
|
| 311 |
#define AR5K_SREV_UNKNOWN 0xffff |
| 312 |
|
| 313 |
#define AR5K_SREV_AR5210 0x00 /* Crete */ |
| 314 |
#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ |
| 315 |
#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ |
| 316 |
#define AR5K_SREV_AR5311B 0x30 /* Spirit */ |
| 317 |
#define AR5K_SREV_AR5211 0x40 /* Oahu */ |
| 318 |
#define AR5K_SREV_AR5212 0x50 /* Venice */ |
| 319 |
#define AR5K_SREV_AR5312_R2 0x52 /* AP31 */ |
| 320 |
#define AR5K_SREV_AR5212_V4 0x54 /* ??? */ |
| 321 |
#define AR5K_SREV_AR5213 0x55 /* ??? */ |
| 322 |
#define AR5K_SREV_AR5312_R7 0x57 /* AP30 */ |
| 323 |
#define AR5K_SREV_AR2313_R8 0x58 /* AP43 */ |
| 324 |
#define AR5K_SREV_AR5213A 0x59 /* Hainan */ |
| 325 |
#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ |
| 326 |
#define AR5K_SREV_AR2414 0x70 /* Griffin */ |
| 327 |
#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */ |
| 328 |
#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */ |
| 329 |
#define AR5K_SREV_AR5424 0x90 /* Condor */ |
| 330 |
#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */ |
| 331 |
#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */ |
| 332 |
#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ |
| 333 |
#define AR5K_SREV_AR5414 0xa0 /* Eagle */ |
| 334 |
#define AR5K_SREV_AR2415 0xb0 /* Talon */ |
| 335 |
#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ |
| 336 |
#define AR5K_SREV_AR5418 0xca /* PCI-E */ |
| 337 |
#define AR5K_SREV_AR2425 0xe0 /* Swan */ |
| 338 |
#define AR5K_SREV_AR2417 0xf0 /* Nala */ |
| 339 |
|
| 340 |
#define AR5K_SREV_RAD_5110 0x00 |
| 341 |
#define AR5K_SREV_RAD_5111 0x10 |
| 342 |
#define AR5K_SREV_RAD_5111A 0x15 |
| 343 |
#define AR5K_SREV_RAD_2111 0x20 |
| 344 |
#define AR5K_SREV_RAD_5112 0x30 |
| 345 |
#define AR5K_SREV_RAD_5112A 0x35 |
| 346 |
#define AR5K_SREV_RAD_5112B 0x36 |
| 347 |
#define AR5K_SREV_RAD_2112 0x40 |
| 348 |
#define AR5K_SREV_RAD_2112A 0x45 |
| 349 |
#define AR5K_SREV_RAD_2112B 0x46 |
| 350 |
#define AR5K_SREV_RAD_2413 0x50 |
| 351 |
#define AR5K_SREV_RAD_5413 0x60 |
| 352 |
#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ |
| 353 |
#define AR5K_SREV_RAD_2317 0x80 |
| 354 |
#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ |
| 355 |
#define AR5K_SREV_RAD_2425 0xa2 |
| 356 |
#define AR5K_SREV_RAD_5133 0xc0 |
| 357 |
|
| 358 |
#define AR5K_SREV_PHY_5211 0x30 |
| 359 |
#define AR5K_SREV_PHY_5212 0x41 |
| 360 |
#define AR5K_SREV_PHY_5212A 0x42 |
| 361 |
#define AR5K_SREV_PHY_5212B 0x43 |
| 362 |
#define AR5K_SREV_PHY_2413 0x45 |
| 363 |
#define AR5K_SREV_PHY_5413 0x61 |
| 364 |
#define AR5K_SREV_PHY_2425 0x70 |
| 365 |
|
| 366 |
/* TODO add support to mac80211 for vendor-specific rates and modes */ |
| 367 |
|
| 368 |
/** |
| 369 |
* DOC: Atheros XR |
| 370 |
* |
| 371 |
* Some of this information is based on Documentation from: |
| 372 |
* |
| 373 |
* http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG |
| 374 |
* |
| 375 |
* Atheros' eXtended Range - range enhancing extension is a modulation scheme |
| 376 |
* that is supposed to double the link distance between an Atheros XR-enabled |
| 377 |
* client device with an Atheros XR-enabled access point. This is achieved |
| 378 |
* by increasing the receiver sensitivity up to, -105dBm, which is about 20dB |
| 379 |
* above what the 802.11 specifications demand. In addition, new (proprietary) |
| 380 |
* data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. |
| 381 |
* |
| 382 |
* Please note that can you either use XR or TURBO but you cannot use both, |
| 383 |
* they are exclusive. |
| 384 |
* |
| 385 |
* Also note that we do not plan to support XR mode at least for now. You can |
| 386 |
* get a mode similar to XR by using 5MHz bwmode. |
| 387 |
*/ |
| 388 |
|
| 389 |
|
| 390 |
/** |
| 391 |
* DOC: Atheros SuperAG |
| 392 |
* |
| 393 |
* In addition to XR we have another modulation scheme called TURBO mode |
| 394 |
* that is supposed to provide a throughput transmission speed up to 40Mbit/s |
| 395 |
* -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two |
| 396 |
* 54Mbit/s 802.11g channels. To use this feature both ends must support it. |
| 397 |
* There is also a distinction between "static" and "dynamic" turbo modes: |
| 398 |
* |
| 399 |
* - Static: is the dumb version: devices set to this mode stick to it until |
| 400 |
* the mode is turned off. |
| 401 |
* |
| 402 |
* - Dynamic: is the intelligent version, the network decides itself if it |
| 403 |
* is ok to use turbo. As soon as traffic is detected on adjacent channels |
| 404 |
* (which would get used in turbo mode), or when a non-turbo station joins |
| 405 |
* the network, turbo mode won't be used until the situation changes again. |
| 406 |
* Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which |
| 407 |
* monitors the used radio band in order to decide whether turbo mode may |
| 408 |
* be used or not. |
| 409 |
* |
| 410 |
* This article claims Super G sticks to bonding of channels 5 and 6 for |
| 411 |
* USA: |
| 412 |
* |
| 413 |
* https://www.pcworld.com/article/id,113428-page,1/article.html |
| 414 |
* |
| 415 |
* The channel bonding seems to be driver specific though. |
| 416 |
* |
| 417 |
* In addition to TURBO modes we also have the following features for even |
| 418 |
* greater speed-up: |
| 419 |
* |
| 420 |
* - Bursting: allows multiple frames to be sent at once, rather than pausing |
| 421 |
* after each frame. Bursting is a standards-compliant feature that can be |
| 422 |
* used with any Access Point. |
| 423 |
* |
| 424 |
* - Fast frames: increases the amount of information that can be sent per |
| 425 |
* frame, also resulting in a reduction of transmission overhead. It is a |
| 426 |
* proprietary feature that needs to be supported by the Access Point. |
| 427 |
* |
| 428 |
* - Compression: data frames are compressed in real time using a Lempel Ziv |
| 429 |
* algorithm. This is done transparently. Once this feature is enabled, |
| 430 |
* compression and decompression takes place inside the chipset, without |
| 431 |
* putting additional load on the host CPU. |
| 432 |
* |
| 433 |
* As with XR we also don't plan to support SuperAG features for now. You can |
| 434 |
* get a mode similar to TURBO by using 40MHz bwmode. |
| 435 |
*/ |
| 436 |
|
| 437 |
|
| 438 |
/** |
| 439 |
* enum ath5k_driver_mode - PHY operation mode |
| 440 |
* @AR5K_MODE_11A: 802.11a |
| 441 |
* @AR5K_MODE_11B: 802.11b |
| 442 |
* @AR5K_MODE_11G: 801.11g |
| 443 |
* @AR5K_MODE_MAX: Used for boundary checks |
| 444 |
* |
| 445 |
* Do not change the order here, we use these as |
| 446 |
* array indices and it also maps EEPROM structures. |
| 447 |
*/ |
| 448 |
enum ath5k_driver_mode { |
| 449 |
AR5K_MODE_11A = 0, |
| 450 |
AR5K_MODE_11B = 1, |
| 451 |
AR5K_MODE_11G = 2, |
| 452 |
AR5K_MODE_MAX = 3 |
| 453 |
}; |
| 454 |
|
| 455 |
/** |
| 456 |
* enum ath5k_ant_mode - Antenna operation mode |
| 457 |
* @AR5K_ANTMODE_DEFAULT: Default antenna setup |
| 458 |
* @AR5K_ANTMODE_FIXED_A: Only antenna A is present |
| 459 |
* @AR5K_ANTMODE_FIXED_B: Only antenna B is present |
| 460 |
* @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap |
| 461 |
* @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc |
| 462 |
* @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc |
| 463 |
* @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx- |
| 464 |
* @AR5K_ANTMODE_MAX: Used for boundary checks |
| 465 |
* |
| 466 |
* For more infos on antenna control check out phy.c |
| 467 |
*/ |
| 468 |
enum ath5k_ant_mode { |
| 469 |
AR5K_ANTMODE_DEFAULT = 0, |
| 470 |
AR5K_ANTMODE_FIXED_A = 1, |
| 471 |
AR5K_ANTMODE_FIXED_B = 2, |
| 472 |
AR5K_ANTMODE_SINGLE_AP = 3, |
| 473 |
AR5K_ANTMODE_SECTOR_AP = 4, |
| 474 |
AR5K_ANTMODE_SECTOR_STA = 5, |
| 475 |
AR5K_ANTMODE_DEBUG = 6, |
| 476 |
AR5K_ANTMODE_MAX, |
| 477 |
}; |
| 478 |
|
| 479 |
/** |
| 480 |
* enum ath5k_bw_mode - Bandwidth operation mode |
| 481 |
* @AR5K_BWMODE_DEFAULT: 20MHz, default operation |
| 482 |
* @AR5K_BWMODE_5MHZ: Quarter rate |
| 483 |
* @AR5K_BWMODE_10MHZ: Half rate |
| 484 |
* @AR5K_BWMODE_40MHZ: Turbo |
| 485 |
*/ |
| 486 |
enum ath5k_bw_mode { |
| 487 |
AR5K_BWMODE_DEFAULT = 0, |
| 488 |
AR5K_BWMODE_5MHZ = 1, |
| 489 |
AR5K_BWMODE_10MHZ = 2, |
| 490 |
AR5K_BWMODE_40MHZ = 3 |
| 491 |
}; |
| 492 |
|
| 493 |
|
| 494 |
|
| 495 |
/****************\ |
| 496 |
TX DEFINITIONS |
| 497 |
\****************/ |
| 498 |
|
| 499 |
/** |
| 500 |
* struct ath5k_tx_status - TX Status descriptor |
| 501 |
* @ts_seqnum: Sequence number |
| 502 |
* @ts_tstamp: Timestamp |
| 503 |
* @ts_status: Status code |
| 504 |
* @ts_final_idx: Final transmission series index |
| 505 |
* @ts_final_retry: Final retry count |
| 506 |
* @ts_rssi: RSSI for received ACK |
| 507 |
* @ts_shortretry: Short retry count |
| 508 |
* @ts_virtcol: Virtual collision count |
| 509 |
* @ts_antenna: Antenna used |
| 510 |
* |
| 511 |
* TX status descriptor gets filled by the hw |
| 512 |
* on each transmission attempt. |
| 513 |
*/ |
| 514 |
struct ath5k_tx_status { |
| 515 |
u16 ts_seqnum; |
| 516 |
u16 ts_tstamp; |
| 517 |
u8 ts_status; |
| 518 |
u8 ts_final_idx; |
| 519 |
u8 ts_final_retry; |
| 520 |
s8 ts_rssi; |
| 521 |
u8 ts_shortretry; |
| 522 |
u8 ts_virtcol; |
| 523 |
u8 ts_antenna; |
| 524 |
}; |
| 525 |
|
| 526 |
#define AR5K_TXSTAT_ALTRATE 0x80 |
| 527 |
#define AR5K_TXERR_XRETRY 0x01 |
| 528 |
#define AR5K_TXERR_FILT 0x02 |
| 529 |
#define AR5K_TXERR_FIFO 0x04 |
| 530 |
|
| 531 |
/** |
| 532 |
* enum ath5k_tx_queue - Queue types used to classify tx queues. |
| 533 |
* @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue |
| 534 |
* @AR5K_TX_QUEUE_DATA: A normal data queue |
| 535 |
* @AR5K_TX_QUEUE_BEACON: The beacon queue |
| 536 |
* @AR5K_TX_QUEUE_CAB: The after-beacon queue |
| 537 |
* @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue |
| 538 |
*/ |
| 539 |
enum ath5k_tx_queue { |
| 540 |
AR5K_TX_QUEUE_INACTIVE = 0, |
| 541 |
AR5K_TX_QUEUE_DATA, |
| 542 |
AR5K_TX_QUEUE_BEACON, |
| 543 |
AR5K_TX_QUEUE_CAB, |
| 544 |
AR5K_TX_QUEUE_UAPSD, |
| 545 |
}; |
| 546 |
|
| 547 |
#define AR5K_NUM_TX_QUEUES 10 |
| 548 |
#define AR5K_NUM_TX_QUEUES_NOQCU 2 |
| 549 |
|
| 550 |
/** |
| 551 |
* enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues |
| 552 |
* @AR5K_WME_AC_BK: Background traffic |
| 553 |
* @AR5K_WME_AC_BE: Best-effort (normal) traffic |
| 554 |
* @AR5K_WME_AC_VI: Video traffic |
| 555 |
* @AR5K_WME_AC_VO: Voice traffic |
| 556 |
* |
| 557 |
* These are the 4 Access Categories as defined in |
| 558 |
* WME spec. 0 is the lowest priority and 4 is the |
| 559 |
* highest. Normal data that hasn't been classified |
| 560 |
* goes to the Best Effort AC. |
| 561 |
*/ |
| 562 |
enum ath5k_tx_queue_subtype { |
| 563 |
AR5K_WME_AC_BK = 0, |
| 564 |
AR5K_WME_AC_BE, |
| 565 |
AR5K_WME_AC_VI, |
| 566 |
AR5K_WME_AC_VO, |
| 567 |
}; |
| 568 |
|
| 569 |
/** |
| 570 |
* enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions |
| 571 |
* @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available) |
| 572 |
* @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available) |
| 573 |
* @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index |
| 574 |
* @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index |
| 575 |
* @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue |
| 576 |
* @AR5K_TX_QUEUE_ID_BEACON: Beacon queue |
| 577 |
* @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery, |
| 578 |
* |
| 579 |
* Each number represents a hw queue. If hw does not support hw queues |
| 580 |
* (eg 5210) all data goes in one queue. |
| 581 |
*/ |
| 582 |
enum ath5k_tx_queue_id { |
| 583 |
AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, |
| 584 |
AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, |
| 585 |
AR5K_TX_QUEUE_ID_DATA_MIN = 0, |
| 586 |
AR5K_TX_QUEUE_ID_DATA_MAX = 3, |
| 587 |
AR5K_TX_QUEUE_ID_UAPSD = 7, |
| 588 |
AR5K_TX_QUEUE_ID_CAB = 8, |
| 589 |
AR5K_TX_QUEUE_ID_BEACON = 9, |
| 590 |
}; |
| 591 |
|
| 592 |
/* |
| 593 |
* Flags to set hw queue's parameters... |
| 594 |
*/ |
| 595 |
#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ |
| 596 |
#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ |
| 597 |
#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ |
| 598 |
#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ |
| 599 |
#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ |
| 600 |
#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ |
| 601 |
#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ |
| 602 |
#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ |
| 603 |
#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ |
| 604 |
#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ |
| 605 |
#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ |
| 606 |
#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ |
| 607 |
#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ |
| 608 |
#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ |
| 609 |
|
| 610 |
/** |
| 611 |
* struct ath5k_txq - Transmit queue state |
| 612 |
* @qnum: Hardware q number |
| 613 |
* @link: Link ptr in last TX desc |
| 614 |
* @q: Transmit queue (&struct list_head) |
| 615 |
* @lock: Lock on q and link |
| 616 |
* @setup: Is the queue configured |
| 617 |
* @txq_len:Number of queued buffers |
| 618 |
* @txq_max: Max allowed num of queued buffers |
| 619 |
* @txq_poll_mark: Used to check if queue got stuck |
| 620 |
* @txq_stuck: Queue stuck counter |
| 621 |
* |
| 622 |
* One of these exists for each hardware transmit queue. |
| 623 |
* Packets sent to us from above are assigned to queues based |
| 624 |
* on their priority. Not all devices support a complete set |
| 625 |
* of hardware transmit queues. For those devices the array |
| 626 |
* sc_ac2q will map multiple priorities to fewer hardware queues |
| 627 |
* (typically all to one hardware queue). |
| 628 |
*/ |
| 629 |
struct ath5k_txq { |
| 630 |
unsigned int qnum; |
| 631 |
u32 *link; |
| 632 |
struct list_head q; |
| 633 |
spinlock_t lock; |
| 634 |
bool setup; |
| 635 |
int txq_len; |
| 636 |
int txq_max; |
| 637 |
bool txq_poll_mark; |
| 638 |
unsigned int txq_stuck; |
| 639 |
}; |
| 640 |
|
| 641 |
/** |
| 642 |
* struct ath5k_txq_info - A struct to hold TX queue's parameters |
| 643 |
* @tqi_type: One of enum ath5k_tx_queue |
| 644 |
* @tqi_subtype: One of enum ath5k_tx_queue_subtype |
| 645 |
* @tqi_flags: TX queue flags (see above) |
| 646 |
* @tqi_aifs: Arbitrated Inter-frame Space |
| 647 |
* @tqi_cw_min: Minimum Contention Window |
| 648 |
* @tqi_cw_max: Maximum Contention Window |
| 649 |
* @tqi_cbr_period: Constant bit rate period |
| 650 |
* @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled |
| 651 |
*/ |
| 652 |
struct ath5k_txq_info { |
| 653 |
enum ath5k_tx_queue tqi_type; |
| 654 |
enum ath5k_tx_queue_subtype tqi_subtype; |
| 655 |
u16 tqi_flags; |
| 656 |
u8 tqi_aifs; |
| 657 |
u16 tqi_cw_min; |
| 658 |
u16 tqi_cw_max; |
| 659 |
u32 tqi_cbr_period; |
| 660 |
u32 tqi_cbr_overflow_limit; |
| 661 |
u32 tqi_burst_time; |
| 662 |
u32 tqi_ready_time; |
| 663 |
}; |
| 664 |
|
| 665 |
/** |
| 666 |
* enum ath5k_pkt_type - Transmit packet types |
| 667 |
* @AR5K_PKT_TYPE_NORMAL: Normal data |
| 668 |
* @AR5K_PKT_TYPE_ATIM: ATIM |
| 669 |
* @AR5K_PKT_TYPE_PSPOLL: PS-Poll |
| 670 |
* @AR5K_PKT_TYPE_BEACON: Beacon |
| 671 |
* @AR5K_PKT_TYPE_PROBE_RESP: Probe response |
| 672 |
* @AR5K_PKT_TYPE_PIFS: PIFS |
| 673 |
* Used on tx control descriptor |
| 674 |
*/ |
| 675 |
enum ath5k_pkt_type { |
| 676 |
AR5K_PKT_TYPE_NORMAL = 0, |
| 677 |
AR5K_PKT_TYPE_ATIM = 1, |
| 678 |
AR5K_PKT_TYPE_PSPOLL = 2, |
| 679 |
AR5K_PKT_TYPE_BEACON = 3, |
| 680 |
AR5K_PKT_TYPE_PROBE_RESP = 4, |
| 681 |
AR5K_PKT_TYPE_PIFS = 5, |
| 682 |
}; |
| 683 |
|
| 684 |
/* |
| 685 |
* TX power and TPC settings |
| 686 |
*/ |
| 687 |
#define AR5K_TXPOWER_OFDM(_r, _v) ( \ |
| 688 |
((0 & 1) << ((_v) + 6)) | \ |
| 689 |
(((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ |
| 690 |
) |
| 691 |
|
| 692 |
#define AR5K_TXPOWER_CCK(_r, _v) ( \ |
| 693 |
(ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ |
| 694 |
) |
| 695 |
|
| 696 |
|
| 697 |
|
| 698 |
/****************\ |
| 699 |
RX DEFINITIONS |
| 700 |
\****************/ |
| 701 |
|
| 702 |
/** |
| 703 |
* struct ath5k_rx_status - RX Status descriptor |
| 704 |
* @rs_datalen: Data length |
| 705 |
* @rs_tstamp: Timestamp |
| 706 |
* @rs_status: Status code |
| 707 |
* @rs_phyerr: PHY error mask |
| 708 |
* @rs_rssi: RSSI in 0.5dbm units |
| 709 |
* @rs_keyix: Index to the key used for decrypting |
| 710 |
* @rs_rate: Rate used to decode the frame |
| 711 |
* @rs_antenna: Antenna used to receive the frame |
| 712 |
* @rs_more: Indicates this is a frame fragment (Fast frames) |
| 713 |
*/ |
| 714 |
struct ath5k_rx_status { |
| 715 |
u16 rs_datalen; |
| 716 |
u16 rs_tstamp; |
| 717 |
u8 rs_status; |
| 718 |
u8 rs_phyerr; |
| 719 |
s8 rs_rssi; |
| 720 |
u8 rs_keyix; |
| 721 |
u8 rs_rate; |
| 722 |
u8 rs_antenna; |
| 723 |
u8 rs_more; |
| 724 |
}; |
| 725 |
|
| 726 |
#define AR5K_RXERR_CRC 0x01 |
| 727 |
#define AR5K_RXERR_PHY 0x02 |
| 728 |
#define AR5K_RXERR_FIFO 0x04 |
| 729 |
#define AR5K_RXERR_DECRYPT 0x08 |
| 730 |
#define AR5K_RXERR_MIC 0x10 |
| 731 |
#define AR5K_RXKEYIX_INVALID ((u8) -1) |
| 732 |
#define AR5K_TXKEYIX_INVALID ((u32) -1) |
| 733 |
|
| 734 |
|
| 735 |
/**************************\ |
| 736 |
BEACON TIMERS DEFINITIONS |
| 737 |
\**************************/ |
| 738 |
|
| 739 |
#define AR5K_BEACON_PERIOD 0x0000ffff |
| 740 |
#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ |
| 741 |
#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ |
| 742 |
|
| 743 |
|
| 744 |
/* |
| 745 |
* TSF to TU conversion: |
| 746 |
* |
| 747 |
* TSF is a 64bit value in usec (microseconds). |
| 748 |
* TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of |
| 749 |
* time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). |
| 750 |
*/ |
| 751 |
#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) |
| 752 |
|
| 753 |
|
| 754 |
|
| 755 |
/*******************************\ |
| 756 |
GAIN OPTIMIZATION DEFINITIONS |
| 757 |
\*******************************/ |
| 758 |
|
| 759 |
/** |
| 760 |
* enum ath5k_rfgain - RF Gain optimization engine state |
| 761 |
* @AR5K_RFGAIN_INACTIVE: Engine disabled |
| 762 |
* @AR5K_RFGAIN_ACTIVE: Probe active |
| 763 |
* @AR5K_RFGAIN_READ_REQUESTED: Probe requested |
| 764 |
* @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change |
| 765 |
*/ |
| 766 |
enum ath5k_rfgain { |
| 767 |
AR5K_RFGAIN_INACTIVE = 0, |
| 768 |
AR5K_RFGAIN_ACTIVE, |
| 769 |
AR5K_RFGAIN_READ_REQUESTED, |
| 770 |
AR5K_RFGAIN_NEED_CHANGE, |
| 771 |
}; |
| 772 |
|
| 773 |
/** |
| 774 |
* struct ath5k_gain - RF Gain optimization engine state data |
| 775 |
* @g_step_idx: Current step index |
| 776 |
* @g_current: Current gain |
| 777 |
* @g_target: Target gain |
| 778 |
* @g_low: Low gain boundary |
| 779 |
* @g_high: High gain boundary |
| 780 |
* @g_f_corr: Gain_F correction |
| 781 |
* @g_state: One of enum ath5k_rfgain |
| 782 |
*/ |
| 783 |
struct ath5k_gain { |
| 784 |
u8 g_step_idx; |
| 785 |
u8 g_current; |
| 786 |
u8 g_target; |
| 787 |
u8 g_low; |
| 788 |
u8 g_high; |
| 789 |
u8 g_f_corr; |
| 790 |
u8 g_state; |
| 791 |
}; |
| 792 |
|
| 793 |
|
| 794 |
|
| 795 |
/********************\ |
| 796 |
COMMON DEFINITIONS |
| 797 |
\********************/ |
| 798 |
|
| 799 |
#define AR5K_SLOT_TIME_9 396 |
| 800 |
#define AR5K_SLOT_TIME_20 880 |
| 801 |
#define AR5K_SLOT_TIME_MAX 0xffff |
| 802 |
|
| 803 |
/** |
| 804 |
* struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111 |
| 805 |
* @a2_flags: Channel flags (internal) |
| 806 |
* @a2_athchan: HW channel number (internal) |
| 807 |
* |
| 808 |
* This structure is used to map 2GHz channels to |
| 809 |
* 5GHz Atheros channels on 2111 frequency converter |
| 810 |
* that comes together with RF5111 |
| 811 |
* TODO: Clean up |
| 812 |
*/ |
| 813 |
struct ath5k_athchan_2ghz { |
| 814 |
u32 a2_flags; |
| 815 |
u16 a2_athchan; |
| 816 |
}; |
| 817 |
|
| 818 |
/** |
| 819 |
* enum ath5k_dmasize - DMA size definitions (2^(n+2)) |
| 820 |
* @AR5K_DMASIZE_4B: 4Bytes |
| 821 |
* @AR5K_DMASIZE_8B: 8Bytes |
| 822 |
* @AR5K_DMASIZE_16B: 16Bytes |
| 823 |
* @AR5K_DMASIZE_32B: 32Bytes |
| 824 |
* @AR5K_DMASIZE_64B: 64Bytes (Default) |
| 825 |
* @AR5K_DMASIZE_128B: 128Bytes |
| 826 |
* @AR5K_DMASIZE_256B: 256Bytes |
| 827 |
* @AR5K_DMASIZE_512B: 512Bytes |
| 828 |
* |
| 829 |
* These are used to set DMA burst size on hw |
| 830 |
* |
| 831 |
* Note: Some platforms can't handle more than 4Bytes |
| 832 |
* be careful on embedded boards. |
| 833 |
*/ |
| 834 |
enum ath5k_dmasize { |
| 835 |
AR5K_DMASIZE_4B = 0, |
| 836 |
AR5K_DMASIZE_8B, |
| 837 |
AR5K_DMASIZE_16B, |
| 838 |
AR5K_DMASIZE_32B, |
| 839 |
AR5K_DMASIZE_64B, |
| 840 |
AR5K_DMASIZE_128B, |
| 841 |
AR5K_DMASIZE_256B, |
| 842 |
AR5K_DMASIZE_512B |
| 843 |
}; |
| 844 |
|
| 845 |
|
| 846 |
|
| 847 |
/******************\ |
| 848 |
RATE DEFINITIONS |
| 849 |
\******************/ |
| 850 |
|
| 851 |
/** |
| 852 |
* DOC: Rate codes |
| 853 |
* |
| 854 |
* Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32. |
| 855 |
* |
| 856 |
* The rate code is used to get the RX rate or set the TX rate on the |
| 857 |
* hardware descriptors. It is also used for internal modulation control |
| 858 |
* and settings. |
| 859 |
* |
| 860 |
* This is the hardware rate map we are aware of (html unfriendly): |
| 861 |
* |
| 862 |
* Rate code Rate (Kbps) |
| 863 |
* --------- ----------- |
| 864 |
* 0x01 3000 (XR) |
| 865 |
* 0x02 1000 (XR) |
| 866 |
* 0x03 250 (XR) |
| 867 |
* 0x04 - 05 -Reserved- |
| 868 |
* 0x06 2000 (XR) |
| 869 |
* 0x07 500 (XR) |
| 870 |
* 0x08 48000 (OFDM) |
| 871 |
* 0x09 24000 (OFDM) |
| 872 |
* 0x0A 12000 (OFDM) |
| 873 |
* 0x0B 6000 (OFDM) |
| 874 |
* 0x0C 54000 (OFDM) |
| 875 |
* 0x0D 36000 (OFDM) |
| 876 |
* 0x0E 18000 (OFDM) |
| 877 |
* 0x0F 9000 (OFDM) |
| 878 |
* 0x10 - 17 -Reserved- |
| 879 |
* 0x18 11000L (CCK) |
| 880 |
* 0x19 5500L (CCK) |
| 881 |
* 0x1A 2000L (CCK) |
| 882 |
* 0x1B 1000L (CCK) |
| 883 |
* 0x1C 11000S (CCK) |
| 884 |
* 0x1D 5500S (CCK) |
| 885 |
* 0x1E 2000S (CCK) |
| 886 |
* 0x1F -Reserved- |
| 887 |
* |
| 888 |
* "S" indicates CCK rates with short preamble and "L" with long preamble. |
| 889 |
* |
| 890 |
* AR5211 has different rate codes for CCK (802.11B) rates. It only uses the |
| 891 |
* lowest 4 bits, so they are the same as above with a 0xF mask. |
| 892 |
* (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). |
| 893 |
* We handle this in ath5k_setup_bands(). |
| 894 |
*/ |
| 895 |
#define AR5K_MAX_RATES 32 |
| 896 |
|
| 897 |
/* B */ |
| 898 |
#define ATH5K_RATE_CODE_1M 0x1B |
| 899 |
#define ATH5K_RATE_CODE_2M 0x1A |
| 900 |
#define ATH5K_RATE_CODE_5_5M 0x19 |
| 901 |
#define ATH5K_RATE_CODE_11M 0x18 |
| 902 |
/* A and G */ |
| 903 |
#define ATH5K_RATE_CODE_6M 0x0B |
| 904 |
#define ATH5K_RATE_CODE_9M 0x0F |
| 905 |
#define ATH5K_RATE_CODE_12M 0x0A |
| 906 |
#define ATH5K_RATE_CODE_18M 0x0E |
| 907 |
#define ATH5K_RATE_CODE_24M 0x09 |
| 908 |
#define ATH5K_RATE_CODE_36M 0x0D |
| 909 |
#define ATH5K_RATE_CODE_48M 0x08 |
| 910 |
#define ATH5K_RATE_CODE_54M 0x0C |
| 911 |
|
| 912 |
/* Adding this flag to rate_code on B rates |
| 913 |
* enables short preamble */ |
| 914 |
#define AR5K_SET_SHORT_PREAMBLE 0x04 |
| 915 |
|
| 916 |
/* |
| 917 |
* Crypto definitions |
| 918 |
*/ |
| 919 |
|
| 920 |
#define AR5K_KEYCACHE_SIZE 8 |
| 921 |
extern bool ath5k_modparam_nohwcrypt; |
| 922 |
|
| 923 |
/***********************\ |
| 924 |
HW RELATED DEFINITIONS |
| 925 |
\***********************/ |
| 926 |
|
| 927 |
/* |
| 928 |
* Misc definitions |
| 929 |
*/ |
| 930 |
#define AR5K_RSSI_EP_MULTIPLIER (1 << 7) |
| 931 |
|
| 932 |
#define AR5K_ASSERT_ENTRY(_e, _s) do { \ |
| 933 |
if (_e >= _s) \ |
| 934 |
return false; \ |
| 935 |
} while (0) |
| 936 |
|
| 937 |
/* |
| 938 |
* Hardware interrupt abstraction |
| 939 |
*/ |
| 940 |
|
| 941 |
/** |
| 942 |
* enum ath5k_int - Hardware interrupt masks helpers |
| 943 |
* @AR5K_INT_RXOK: Frame successfully received |
| 944 |
* @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor |
| 945 |
* @AR5K_INT_RXERR: Frame reception failed |
| 946 |
* @AR5K_INT_RXNOFRM: No frame received within a specified time period |
| 947 |
* @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors |
| 948 |
* @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is |
| 949 |
* not always fatal, on some chips we can continue operation |
| 950 |
* without resetting the card, that's why %AR5K_INT_FATAL is not |
| 951 |
* common for all chips. |
| 952 |
* @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts |
| 953 |
* |
| 954 |
* @AR5K_INT_TXOK: Frame transmission success |
| 955 |
* @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor |
| 956 |
* @AR5K_INT_TXERR: Frame transmission failure |
| 957 |
* @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The |
| 958 |
* Queue Control Unit (QCU) signals an EOL interrupt only if a |
| 959 |
* descriptor's LinkPtr is NULL. For more details, refer to: |
| 960 |
* "http://www.freepatentsonline.com/20030225739.html" |
| 961 |
* @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period |
| 962 |
* @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should |
| 963 |
* increase the TX trigger threshold. |
| 964 |
* @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts |
| 965 |
* |
| 966 |
* @AR5K_INT_MIB: Indicates the either Management Information Base counters or |
| 967 |
* one of the PHY error counters reached the maximum value and |
| 968 |
* should be read and cleared. |
| 969 |
* @AR5K_INT_SWI: Software triggered interrupt. |
| 970 |
* @AR5K_INT_RXPHY: RX PHY Error |
| 971 |
* @AR5K_INT_RXKCM: RX Key cache miss |
| 972 |
* @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a |
| 973 |
* beacon that must be handled in software. The alternative is if |
| 974 |
* you have VEOL support, in that case you let the hardware deal |
| 975 |
* with things. |
| 976 |
* @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold |
| 977 |
* @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing |
| 978 |
* beacons from the AP have associated with, we should probably |
| 979 |
* try to reassociate. When in IBSS mode this might mean we have |
| 980 |
* not received any beacons from any local stations. Note that |
| 981 |
* every station in an IBSS schedules to send beacons at the |
| 982 |
* Target Beacon Transmission Time (TBTT) with a random backoff. |
| 983 |
* @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty. |
| 984 |
* @AR5K_INT_TIM: Beacon with local station's TIM bit set |
| 985 |
* @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received |
| 986 |
* @AR5K_INT_DTIM_SYNC: DTIM sync lost |
| 987 |
* @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to |
| 988 |
* our GPIO pins. |
| 989 |
* @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting |
| 990 |
* @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got |
| 991 |
* nothing or an incomplete CAB frame sequence. |
| 992 |
* @AR5K_INT_QCBRORN: A queue got it's CBR counter expired |
| 993 |
* @AR5K_INT_QCBRURN: A queue got triggered wile empty |
| 994 |
* @AR5K_INT_QTRIG: A queue got triggered |
| 995 |
* |
| 996 |
* @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA |
| 997 |
* errors. Indicates we need to reset the card. |
| 998 |
* @AR5K_INT_GLOBAL: Used to clear and set the IER |
| 999 |
* @AR5K_INT_NOCARD: Signals the card has been removed |
| 1000 |
* @AR5K_INT_COMMON: Common interrupts shared among MACs with the same |
| 1001 |
* bit value |
| 1002 |
* |
| 1003 |
* These are mapped to take advantage of some common bits |
| 1004 |
* between the MACs, to be able to set intr properties |
| 1005 |
* easier. Some of them are not used yet inside hw.c. Most map |
| 1006 |
* to the respective hw interrupt value as they are common among different |
| 1007 |
* MACs. |
| 1008 |
*/ |
| 1009 |
enum ath5k_int { |
| 1010 |
AR5K_INT_RXOK = 0x00000001, |
| 1011 |
AR5K_INT_RXDESC = 0x00000002, |
| 1012 |
AR5K_INT_RXERR = 0x00000004, |
| 1013 |
AR5K_INT_RXNOFRM = 0x00000008, |
| 1014 |
AR5K_INT_RXEOL = 0x00000010, |
| 1015 |
AR5K_INT_RXORN = 0x00000020, |
| 1016 |
AR5K_INT_TXOK = 0x00000040, |
| 1017 |
AR5K_INT_TXDESC = 0x00000080, |
| 1018 |
AR5K_INT_TXERR = 0x00000100, |
| 1019 |
AR5K_INT_TXNOFRM = 0x00000200, |
| 1020 |
AR5K_INT_TXEOL = 0x00000400, |
| 1021 |
AR5K_INT_TXURN = 0x00000800, |
| 1022 |
AR5K_INT_MIB = 0x00001000, |
| 1023 |
AR5K_INT_SWI = 0x00002000, |
| 1024 |
AR5K_INT_RXPHY = 0x00004000, |
| 1025 |
AR5K_INT_RXKCM = 0x00008000, |
| 1026 |
AR5K_INT_SWBA = 0x00010000, |
| 1027 |
AR5K_INT_BRSSI = 0x00020000, |
| 1028 |
AR5K_INT_BMISS = 0x00040000, |
| 1029 |
AR5K_INT_FATAL = 0x00080000, /* Non common */ |
| 1030 |
AR5K_INT_BNR = 0x00100000, /* Non common */ |
| 1031 |
AR5K_INT_TIM = 0x00200000, /* Non common */ |
| 1032 |
AR5K_INT_DTIM = 0x00400000, /* Non common */ |
| 1033 |
AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ |
| 1034 |
AR5K_INT_GPIO = 0x01000000, |
| 1035 |
AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ |
| 1036 |
AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ |
| 1037 |
AR5K_INT_QCBRORN = 0x08000000, /* Non common */ |
| 1038 |
AR5K_INT_QCBRURN = 0x10000000, /* Non common */ |
| 1039 |
AR5K_INT_QTRIG = 0x20000000, /* Non common */ |
| 1040 |
AR5K_INT_GLOBAL = 0x80000000, |
| 1041 |
|
| 1042 |
AR5K_INT_TX_ALL = AR5K_INT_TXOK |
| 1043 |
| AR5K_INT_TXDESC |
| 1044 |
| AR5K_INT_TXERR |
| 1045 |
| AR5K_INT_TXNOFRM |
| 1046 |
| AR5K_INT_TXEOL |
| 1047 |
| AR5K_INT_TXURN, |
| 1048 |
|
| 1049 |
AR5K_INT_RX_ALL = AR5K_INT_RXOK |
| 1050 |
| AR5K_INT_RXDESC |
| 1051 |
| AR5K_INT_RXERR |
| 1052 |
| AR5K_INT_RXNOFRM |
| 1053 |
| AR5K_INT_RXEOL |
| 1054 |
| AR5K_INT_RXORN, |
| 1055 |
|
| 1056 |
AR5K_INT_COMMON = AR5K_INT_RXOK |
| 1057 |
| AR5K_INT_RXDESC |
| 1058 |
| AR5K_INT_RXERR |
| 1059 |
| AR5K_INT_RXNOFRM |
| 1060 |
| AR5K_INT_RXEOL |
| 1061 |
| AR5K_INT_RXORN |
| 1062 |
| AR5K_INT_TXOK |
| 1063 |
| AR5K_INT_TXDESC |
| 1064 |
| AR5K_INT_TXERR |
| 1065 |
| AR5K_INT_TXNOFRM |
| 1066 |
| AR5K_INT_TXEOL |
| 1067 |
| AR5K_INT_TXURN |
| 1068 |
| AR5K_INT_MIB |
| 1069 |
| AR5K_INT_SWI |
| 1070 |
| AR5K_INT_RXPHY |
| 1071 |
| AR5K_INT_RXKCM |
| 1072 |
| AR5K_INT_SWBA |
| 1073 |
| AR5K_INT_BRSSI |
| 1074 |
| AR5K_INT_BMISS |
| 1075 |
| AR5K_INT_GPIO |
| 1076 |
| AR5K_INT_GLOBAL, |
| 1077 |
|
| 1078 |
AR5K_INT_NOCARD = 0xffffffff |
| 1079 |
}; |
| 1080 |
|
| 1081 |
/** |
| 1082 |
* enum ath5k_calibration_mask - Mask which calibration is active at the moment |
| 1083 |
* @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT) |
| 1084 |
* @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q) |
| 1085 |
* @AR5K_CALIBRATION_NF: Noise Floor calibration |
| 1086 |
* @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity |
| 1087 |
*/ |
| 1088 |
enum ath5k_calibration_mask { |
| 1089 |
AR5K_CALIBRATION_FULL = 0x01, |
| 1090 |
AR5K_CALIBRATION_SHORT = 0x02, |
| 1091 |
AR5K_CALIBRATION_NF = 0x04, |
| 1092 |
AR5K_CALIBRATION_ANI = 0x08, |
| 1093 |
}; |
| 1094 |
|
| 1095 |
/** |
| 1096 |
* enum ath5k_power_mode - Power management modes |
| 1097 |
* @AR5K_PM_UNDEFINED: Undefined |
| 1098 |
* @AR5K_PM_AUTO: Allow card to sleep if possible |
| 1099 |
* @AR5K_PM_AWAKE: Force card to wake up |
| 1100 |
* @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS) |
| 1101 |
* @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration |
| 1102 |
* |
| 1103 |
* Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO |
| 1104 |
* are also known to have problems on some cards. This is not a big |
| 1105 |
* problem though because we can have almost the same effect as |
| 1106 |
* FULL_SLEEP by putting card on warm reset (it's almost powered down). |
| 1107 |
*/ |
| 1108 |
enum ath5k_power_mode { |
| 1109 |
AR5K_PM_UNDEFINED = 0, |
| 1110 |
AR5K_PM_AUTO, |
| 1111 |
AR5K_PM_AWAKE, |
| 1112 |
AR5K_PM_FULL_SLEEP, |
| 1113 |
AR5K_PM_NETWORK_SLEEP, |
| 1114 |
}; |
| 1115 |
|
| 1116 |
/* |
| 1117 |
* These match net80211 definitions (not used in |
| 1118 |
* mac80211). |
| 1119 |
* TODO: Clean this up |
| 1120 |
*/ |
| 1121 |
#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ |
| 1122 |
#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ |
| 1123 |
#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ |
| 1124 |
#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ |
| 1125 |
#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ |
| 1126 |
|
| 1127 |
/* GPIO-controlled software LED */ |
| 1128 |
#define AR5K_SOFTLED_PIN 0 |
| 1129 |
#define AR5K_SOFTLED_ON 0 |
| 1130 |
#define AR5K_SOFTLED_OFF 1 |
| 1131 |
|
| 1132 |
|
| 1133 |
/* XXX: we *may* move cap_range stuff to struct wiphy */ |
| 1134 |
struct ath5k_capabilities { |
| 1135 |
/* |
| 1136 |
* Supported PHY modes |
| 1137 |
* (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...) |
| 1138 |
*/ |
| 1139 |
DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); |
| 1140 |
|
| 1141 |
/* |
| 1142 |
* Frequency range (without regulation restrictions) |
| 1143 |
*/ |
| 1144 |
struct { |
| 1145 |
u16 range_2ghz_min; |
| 1146 |
u16 range_2ghz_max; |
| 1147 |
u16 range_5ghz_min; |
| 1148 |
u16 range_5ghz_max; |
| 1149 |
} cap_range; |
| 1150 |
|
| 1151 |
/* |
| 1152 |
* Values stored in the EEPROM (some of them...) |
| 1153 |
*/ |
| 1154 |
struct ath5k_eeprom_info cap_eeprom; |
| 1155 |
|
| 1156 |
/* |
| 1157 |
* Queue information |
| 1158 |
*/ |
| 1159 |
struct { |
| 1160 |
u8 q_tx_num; |
| 1161 |
} cap_queues; |
| 1162 |
|
| 1163 |
bool cap_has_phyerr_counters; |
| 1164 |
bool cap_has_mrr_support; |
| 1165 |
bool cap_needs_2GHz_ovr; |
| 1166 |
}; |
| 1167 |
|
| 1168 |
/* size of noise floor history (keep it a power of two) */ |
| 1169 |
#define ATH5K_NF_CAL_HIST_MAX 8 |
| 1170 |
struct ath5k_nfcal_hist { |
| 1171 |
s16 index; /* current index into nfval */ |
| 1172 |
s16 nfval[ATH5K_NF_CAL_HIST_MAX]; /* last few noise floors */ |
| 1173 |
}; |
| 1174 |
|
| 1175 |
#define ATH5K_LED_MAX_NAME_LEN 31 |
| 1176 |
|
| 1177 |
/* |
| 1178 |
* State for LED triggers |
| 1179 |
*/ |
| 1180 |
struct ath5k_led { |
| 1181 |
char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ |
| 1182 |
struct ath5k_hw *ah; /* driver state */ |
| 1183 |
struct led_classdev led_dev; /* led classdev */ |
| 1184 |
}; |
| 1185 |
|
| 1186 |
/* Rfkill */ |
| 1187 |
struct ath5k_rfkill { |
| 1188 |
/* GPIO PIN for rfkill */ |
| 1189 |
u16 gpio; |
| 1190 |
/* polarity of rfkill GPIO PIN */ |
| 1191 |
bool polarity; |
| 1192 |
/* RFKILL toggle tasklet */ |
| 1193 |
struct tasklet_struct toggleq; |
| 1194 |
}; |
| 1195 |
|
| 1196 |
/* statistics */ |
| 1197 |
struct ath5k_statistics { |
| 1198 |
/* antenna use */ |
| 1199 |
unsigned int antenna_rx[5]; /* frames count per antenna RX */ |
| 1200 |
unsigned int antenna_tx[5]; /* frames count per antenna TX */ |
| 1201 |
|
| 1202 |
/* frame errors */ |
| 1203 |
unsigned int rx_all_count; /* all RX frames, including errors */ |
| 1204 |
unsigned int tx_all_count; /* all TX frames, including errors */ |
| 1205 |
unsigned int rx_bytes_count; /* all RX bytes, including errored pkts |
| 1206 |
* and the MAC headers for each packet |
| 1207 |
*/ |
| 1208 |
unsigned int tx_bytes_count; /* all TX bytes, including errored pkts |
| 1209 |
* and the MAC headers and padding for |
| 1210 |
* each packet. |
| 1211 |
*/ |
| 1212 |
unsigned int rxerr_crc; |
| 1213 |
unsigned int rxerr_phy; |
| 1214 |
unsigned int rxerr_phy_code[32]; |
| 1215 |
unsigned int rxerr_fifo; |
| 1216 |
unsigned int rxerr_decrypt; |
| 1217 |
unsigned int rxerr_mic; |
| 1218 |
unsigned int rxerr_proc; |
| 1219 |
unsigned int rxerr_jumbo; |
| 1220 |
unsigned int txerr_retry; |
| 1221 |
unsigned int txerr_fifo; |
| 1222 |
unsigned int txerr_filt; |
| 1223 |
|
| 1224 |
/* MIB counters */ |
| 1225 |
unsigned int ack_fail; |
| 1226 |
unsigned int rts_fail; |
| 1227 |
unsigned int rts_ok; |
| 1228 |
unsigned int fcs_error; |
| 1229 |
unsigned int beacons; |
| 1230 |
|
| 1231 |
unsigned int mib_intr; |
| 1232 |
unsigned int rxorn_intr; |
| 1233 |
unsigned int rxeol_intr; |
| 1234 |
}; |
| 1235 |
|
| 1236 |
/* |
| 1237 |
* Misc defines |
| 1238 |
*/ |
| 1239 |
|
| 1240 |
#define AR5K_MAX_GPIO 10 |
| 1241 |
#define AR5K_MAX_RF_BANKS 8 |
| 1242 |
|
| 1243 |
#if CHAN_DEBUG |
| 1244 |
#define ATH_CHAN_MAX (26 + 26 + 26 + 200 + 200) |
| 1245 |
#else |
| 1246 |
#define ATH_CHAN_MAX (14 + 14 + 14 + 252 + 20) |
| 1247 |
#endif |
| 1248 |
|
| 1249 |
#define ATH_RXBUF 40 /* number of RX buffers */ |
| 1250 |
#define ATH_TXBUF 200 /* number of TX buffers */ |
| 1251 |
#define ATH_BCBUF 4 /* number of beacon buffers */ |
| 1252 |
#define ATH5K_TXQ_LEN_MAX (ATH_TXBUF / 4) /* bufs per queue */ |
| 1253 |
#define ATH5K_TXQ_LEN_LOW (ATH5K_TXQ_LEN_MAX / 2) /* low mark */ |
| 1254 |
|
| 1255 |
DECLARE_EWMA(beacon_rssi, 10, 8) |
| 1256 |
|
| 1257 |
/* Driver state associated with an instance of a device */ |
| 1258 |
struct ath5k_hw { |
| 1259 |
struct ath_common common; |
| 1260 |
|
| 1261 |
struct pci_dev *pdev; |
| 1262 |
struct device *dev; /* for dma mapping */ |
| 1263 |
int irq; |
| 1264 |
u16 devid; |
| 1265 |
void __iomem *iobase; /* address of the device */ |
| 1266 |
struct mutex lock; /* dev-level lock */ |
| 1267 |
struct ieee80211_hw *hw; /* IEEE 802.11 common */ |
| 1268 |
struct ieee80211_supported_band sbands[NUM_NL80211_BANDS]; |
| 1269 |
struct ieee80211_channel channels[ATH_CHAN_MAX]; |
| 1270 |
struct ieee80211_rate rates[NUM_NL80211_BANDS][AR5K_MAX_RATES]; |
| 1271 |
s8 rate_idx[NUM_NL80211_BANDS][AR5K_MAX_RATES]; |
| 1272 |
enum nl80211_iftype opmode; |
| 1273 |
|
| 1274 |
#ifdef CONFIG_ATH5K_DEBUG |
| 1275 |
struct ath5k_dbg_info debug; /* debug info */ |
| 1276 |
#endif /* CONFIG_ATH5K_DEBUG */ |
| 1277 |
|
| 1278 |
struct ath5k_buf *bufptr; /* allocated buffer ptr */ |
| 1279 |
struct ath5k_desc *desc; /* TX/RX descriptors */ |
| 1280 |
dma_addr_t desc_daddr; /* DMA (physical) address */ |
| 1281 |
size_t desc_len; /* size of TX/RX descriptors */ |
| 1282 |
|
| 1283 |
DECLARE_BITMAP(status, 4); |
| 1284 |
#define ATH_STAT_INVALID 0 /* disable hardware accesses */ |
| 1285 |
#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */ |
| 1286 |
#define ATH_STAT_STARTED 3 /* opened & irqs enabled */ |
| 1287 |
#define ATH_STAT_RESET 4 /* hw reset */ |
| 1288 |
|
| 1289 |
unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ |
| 1290 |
unsigned int fif_filter_flags; /* Current FIF_* filter flags */ |
| 1291 |
struct ieee80211_channel *curchan; /* current h/w channel */ |
| 1292 |
|
| 1293 |
u16 nvifs; |
| 1294 |
|
| 1295 |
enum ath5k_int imask; /* interrupt mask copy */ |
| 1296 |
|
| 1297 |
spinlock_t irqlock; |
| 1298 |
bool rx_pending; /* rx tasklet pending */ |
| 1299 |
bool tx_pending; /* tx tasklet pending */ |
| 1300 |
|
| 1301 |
u8 bssidmask[ETH_ALEN]; |
| 1302 |
|
| 1303 |
unsigned int led_pin, /* GPIO pin for driving LED */ |
| 1304 |
led_on; /* pin setting for LED on */ |
| 1305 |
|
| 1306 |
struct work_struct reset_work; /* deferred chip reset */ |
| 1307 |
struct work_struct calib_work; /* deferred phy calibration */ |
| 1308 |
|
| 1309 |
struct list_head rxbuf; /* receive buffer */ |
| 1310 |
spinlock_t rxbuflock; |
| 1311 |
u32 *rxlink; /* link ptr in last RX desc */ |
| 1312 |
struct tasklet_struct rxtq; /* rx intr tasklet */ |
| 1313 |
struct ath5k_led rx_led; /* rx led */ |
| 1314 |
|
| 1315 |
struct list_head txbuf; /* transmit buffer */ |
| 1316 |
spinlock_t txbuflock; |
| 1317 |
unsigned int txbuf_len; /* buf count in txbuf list */ |
| 1318 |
struct ath5k_txq txqs[AR5K_NUM_TX_QUEUES]; /* tx queues */ |
| 1319 |
struct tasklet_struct txtq; /* tx intr tasklet */ |
| 1320 |
struct ath5k_led tx_led; /* tx led */ |
| 1321 |
|
| 1322 |
struct ath5k_rfkill rf_kill; |
| 1323 |
|
| 1324 |
spinlock_t block; /* protects beacon */ |
| 1325 |
struct tasklet_struct beacontq; /* beacon intr tasklet */ |
| 1326 |
struct list_head bcbuf; /* beacon buffer */ |
| 1327 |
struct ieee80211_vif *bslot[ATH_BCBUF]; |
| 1328 |
u16 num_ap_vifs; |
| 1329 |
u16 num_adhoc_vifs; |
| 1330 |
u16 num_mesh_vifs; |
| 1331 |
unsigned int bhalq, /* SW q for outgoing beacons */ |
| 1332 |
bmisscount, /* missed beacon transmits */ |
| 1333 |
bintval, /* beacon interval in TU */ |
| 1334 |
bsent; |
| 1335 |
unsigned int nexttbtt; /* next beacon time in TU */ |
| 1336 |
struct ath5k_txq *cabq; /* content after beacon */ |
| 1337 |
|
| 1338 |
bool assoc; /* associate state */ |
| 1339 |
bool enable_beacon; /* true if beacons are on */ |
| 1340 |
|
| 1341 |
struct ath5k_statistics stats; |
| 1342 |
|
| 1343 |
struct ath5k_ani_state ani_state; |
| 1344 |
struct tasklet_struct ani_tasklet; /* ANI calibration */ |
| 1345 |
|
| 1346 |
struct delayed_work tx_complete_work; |
| 1347 |
|
| 1348 |
struct survey_info survey; /* collected survey info */ |
| 1349 |
|
| 1350 |
enum ath5k_int ah_imr; |
| 1351 |
|
| 1352 |
struct ieee80211_channel *ah_current_channel; |
| 1353 |
bool ah_iq_cal_needed; |
| 1354 |
bool ah_single_chip; |
| 1355 |
|
| 1356 |
enum ath5k_version ah_version; |
| 1357 |
enum ath5k_radio ah_radio; |
| 1358 |
u32 ah_mac_srev; |
| 1359 |
u16 ah_mac_version; |
| 1360 |
u16 ah_phy_revision; |
| 1361 |
u16 ah_radio_5ghz_revision; |
| 1362 |
u16 ah_radio_2ghz_revision; |
| 1363 |
|
| 1364 |
#define ah_modes ah_capabilities.cap_mode |
| 1365 |
#define ah_ee_version ah_capabilities.cap_eeprom.ee_version |
| 1366 |
|
| 1367 |
u8 ah_retry_long; |
| 1368 |
u8 ah_retry_short; |
| 1369 |
|
| 1370 |
bool ah_use_32khz_clock; |
| 1371 |
|
| 1372 |
u8 ah_coverage_class; |
| 1373 |
bool ah_ack_bitrate_high; |
| 1374 |
u8 ah_bwmode; |
| 1375 |
bool ah_short_slot; |
| 1376 |
|
| 1377 |
/* Antenna Control */ |
| 1378 |
u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; |
| 1379 |
u8 ah_ant_mode; |
| 1380 |
u8 ah_tx_ant; |
| 1381 |
u8 ah_def_ant; |
| 1382 |
|
| 1383 |
struct ath5k_capabilities ah_capabilities; |
| 1384 |
|
| 1385 |
struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; |
| 1386 |
u32 ah_txq_status; |
| 1387 |
u32 ah_txq_imr_txok; |
| 1388 |
u32 ah_txq_imr_txerr; |
| 1389 |
u32 ah_txq_imr_txurn; |
| 1390 |
u32 ah_txq_imr_txdesc; |
| 1391 |
u32 ah_txq_imr_txeol; |
| 1392 |
u32 ah_txq_imr_cbrorn; |
| 1393 |
u32 ah_txq_imr_cbrurn; |
| 1394 |
u32 ah_txq_imr_qtrig; |
| 1395 |
u32 ah_txq_imr_nofrm; |
| 1396 |
|
| 1397 |
u32 ah_txq_isr_txok_all; |
| 1398 |
|
| 1399 |
u32 *ah_rf_banks; |
| 1400 |
size_t ah_rf_banks_size; |
| 1401 |
size_t ah_rf_regs_count; |
| 1402 |
struct ath5k_gain ah_gain; |
| 1403 |
u8 ah_offset[AR5K_MAX_RF_BANKS]; |
| 1404 |
|
| 1405 |
|
| 1406 |
struct { |
| 1407 |
/* Temporary tables used for interpolation */ |
| 1408 |
u8 tmpL[AR5K_EEPROM_N_PD_GAINS] |
| 1409 |
[AR5K_EEPROM_POWER_TABLE_SIZE]; |
| 1410 |
u8 tmpR[AR5K_EEPROM_N_PD_GAINS] |
| 1411 |
[AR5K_EEPROM_POWER_TABLE_SIZE]; |
| 1412 |
u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; |
| 1413 |
u16 txp_rates_power_table[AR5K_MAX_RATES]; |
| 1414 |
u8 txp_min_idx; |
| 1415 |
bool txp_tpc; |
| 1416 |
/* Values in 0.25dB units */ |
| 1417 |
s16 txp_min_pwr; |
| 1418 |
s16 txp_max_pwr; |
| 1419 |
s16 txp_cur_pwr; |
| 1420 |
/* Values in 0.5dB units */ |
| 1421 |
s16 txp_offset; |
| 1422 |
s16 txp_ofdm; |
| 1423 |
s16 txp_cck_ofdm_gainf_delta; |
| 1424 |
/* Value in dB units */ |
| 1425 |
s16 txp_cck_ofdm_pwr_delta; |
| 1426 |
bool txp_setup; |
| 1427 |
int txp_requested; /* Requested tx power in dBm */ |
| 1428 |
} ah_txpower; |
| 1429 |
|
| 1430 |
struct ath5k_nfcal_hist ah_nfcal_hist; |
| 1431 |
|
| 1432 |
/* average beacon RSSI in our BSS (used by ANI) */ |
| 1433 |
struct ewma_beacon_rssi ah_beacon_rssi_avg; |
| 1434 |
|
| 1435 |
/* noise floor from last periodic calibration */ |
| 1436 |
s32 ah_noise_floor; |
| 1437 |
|
| 1438 |
/* Calibration timestamp */ |
| 1439 |
unsigned long ah_cal_next_full; |
| 1440 |
unsigned long ah_cal_next_short; |
| 1441 |
unsigned long ah_cal_next_ani; |
| 1442 |
|
| 1443 |
/* Calibration mask */ |
| 1444 |
u8 ah_cal_mask; |
| 1445 |
|
| 1446 |
/* |
| 1447 |
* Function pointers |
| 1448 |
*/ |
| 1449 |
int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, |
| 1450 |
unsigned int, unsigned int, int, enum ath5k_pkt_type, |
| 1451 |
unsigned int, unsigned int, unsigned int, unsigned int, |
| 1452 |
unsigned int, unsigned int, unsigned int, unsigned int); |
| 1453 |
int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, |
| 1454 |
struct ath5k_tx_status *); |
| 1455 |
int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, |
| 1456 |
struct ath5k_rx_status *); |
| 1457 |
}; |
| 1458 |
|
| 1459 |
struct ath_bus_ops { |
| 1460 |
enum ath_bus_type ath_bus_type; |
| 1461 |
void (*read_cachesize)(struct ath_common *common, int *csz); |
| 1462 |
bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); |
| 1463 |
int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac); |
| 1464 |
}; |
| 1465 |
|
| 1466 |
/* |
| 1467 |
* Prototypes |
| 1468 |
*/ |
| 1469 |
extern const struct ieee80211_ops ath5k_hw_ops; |
| 1470 |
|
| 1471 |
/* Initialization and detach functions */ |
| 1472 |
int ath5k_hw_init(struct ath5k_hw *ah); |
| 1473 |
void ath5k_hw_deinit(struct ath5k_hw *ah); |
| 1474 |
|
| 1475 |
int ath5k_sysfs_register(struct ath5k_hw *ah); |
| 1476 |
void ath5k_sysfs_unregister(struct ath5k_hw *ah); |
| 1477 |
|
| 1478 |
/*Chip id helper functions */ |
| 1479 |
int ath5k_hw_read_srev(struct ath5k_hw *ah); |
| 1480 |
|
| 1481 |
/* LED functions */ |
| 1482 |
int ath5k_init_leds(struct ath5k_hw *ah); |
| 1483 |
void ath5k_led_enable(struct ath5k_hw *ah); |
| 1484 |
void ath5k_led_off(struct ath5k_hw *ah); |
| 1485 |
void ath5k_unregister_leds(struct ath5k_hw *ah); |
| 1486 |
|
| 1487 |
|
| 1488 |
/* Reset Functions */ |
| 1489 |
int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel); |
| 1490 |
int ath5k_hw_on_hold(struct ath5k_hw *ah); |
| 1491 |
int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, |
| 1492 |
struct ieee80211_channel *channel, bool fast, bool skip_pcu); |
| 1493 |
int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, |
| 1494 |
bool is_set); |
| 1495 |
/* Power management functions */ |
| 1496 |
|
| 1497 |
|
| 1498 |
/* Clock rate related functions */ |
| 1499 |
unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec); |
| 1500 |
unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock); |
| 1501 |
void ath5k_hw_set_clockrate(struct ath5k_hw *ah); |
| 1502 |
|
| 1503 |
|
| 1504 |
/* DMA Related Functions */ |
| 1505 |
void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); |
| 1506 |
u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); |
| 1507 |
int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); |
| 1508 |
int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); |
| 1509 |
int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue); |
| 1510 |
u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); |
| 1511 |
int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, |
| 1512 |
u32 phys_addr); |
| 1513 |
int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); |
| 1514 |
/* Interrupt handling */ |
| 1515 |
bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); |
| 1516 |
int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); |
| 1517 |
enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); |
| 1518 |
void ath5k_hw_update_mib_counters(struct ath5k_hw *ah); |
| 1519 |
/* Init/Stop functions */ |
| 1520 |
void ath5k_hw_dma_init(struct ath5k_hw *ah); |
| 1521 |
int ath5k_hw_dma_stop(struct ath5k_hw *ah); |
| 1522 |
|
| 1523 |
/* EEPROM access functions */ |
| 1524 |
int ath5k_eeprom_init(struct ath5k_hw *ah); |
| 1525 |
void ath5k_eeprom_detach(struct ath5k_hw *ah); |
| 1526 |
int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah, |
| 1527 |
struct ieee80211_channel *channel); |
| 1528 |
|
| 1529 |
/* Protocol Control Unit Functions */ |
| 1530 |
/* Helpers */ |
| 1531 |
int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band, |
| 1532 |
int len, struct ieee80211_rate *rate, bool shortpre); |
| 1533 |
unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah); |
| 1534 |
unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah); |
| 1535 |
int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode); |
| 1536 |
void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class); |
| 1537 |
/* RX filter control*/ |
| 1538 |
int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); |
| 1539 |
void ath5k_hw_set_bssid(struct ath5k_hw *ah); |
| 1540 |
void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); |
| 1541 |
void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); |
| 1542 |
u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); |
| 1543 |
void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); |
| 1544 |
/* Receive (DRU) start/stop functions */ |
| 1545 |
void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); |
| 1546 |
void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); |
| 1547 |
/* Beacon control functions */ |
| 1548 |
u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); |
| 1549 |
void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); |
| 1550 |
void ath5k_hw_reset_tsf(struct ath5k_hw *ah); |
| 1551 |
void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, |
| 1552 |
u32 interval); |
| 1553 |
bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval); |
| 1554 |
/* Init function */ |
| 1555 |
void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode); |
| 1556 |
|
| 1557 |
/* Queue Control Unit, DFS Control Unit Functions */ |
| 1558 |
int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, |
| 1559 |
struct ath5k_txq_info *queue_info); |
| 1560 |
int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, |
| 1561 |
const struct ath5k_txq_info *queue_info); |
| 1562 |
int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, |
| 1563 |
enum ath5k_tx_queue queue_type, |
| 1564 |
struct ath5k_txq_info *queue_info); |
| 1565 |
void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah, |
| 1566 |
unsigned int queue); |
| 1567 |
u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); |
| 1568 |
void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); |
| 1569 |
int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); |
| 1570 |
int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time); |
| 1571 |
/* Init function */ |
| 1572 |
int ath5k_hw_init_queues(struct ath5k_hw *ah); |
| 1573 |
|
| 1574 |
/* Hardware Descriptor Functions */ |
| 1575 |
int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); |
| 1576 |
int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, |
| 1577 |
u32 size, unsigned int flags); |
| 1578 |
int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, |
| 1579 |
unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, |
| 1580 |
u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3); |
| 1581 |
|
| 1582 |
|
| 1583 |
/* GPIO Functions */ |
| 1584 |
void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); |
| 1585 |
int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); |
| 1586 |
int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); |
| 1587 |
u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); |
| 1588 |
int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); |
| 1589 |
void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, |
| 1590 |
u32 interrupt_level); |
| 1591 |
|
| 1592 |
|
| 1593 |
/* RFkill Functions */ |
| 1594 |
void ath5k_rfkill_hw_start(struct ath5k_hw *ah); |
| 1595 |
void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); |
| 1596 |
|
| 1597 |
|
| 1598 |
/* Misc functions TODO: Cleanup */ |
| 1599 |
int ath5k_hw_set_capabilities(struct ath5k_hw *ah); |
| 1600 |
int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); |
| 1601 |
int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); |
| 1602 |
|
| 1603 |
|
| 1604 |
/* Initial register settings functions */ |
| 1605 |
int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); |
| 1606 |
|
| 1607 |
|
| 1608 |
/* PHY functions */ |
| 1609 |
/* Misc PHY functions */ |
| 1610 |
u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band); |
| 1611 |
int ath5k_hw_phy_disable(struct ath5k_hw *ah); |
| 1612 |
/* Gain_F optimization */ |
| 1613 |
enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); |
| 1614 |
int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); |
| 1615 |
/* PHY/RF channel functions */ |
| 1616 |
bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel); |
| 1617 |
/* PHY calibration */ |
| 1618 |
void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); |
| 1619 |
int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, |
| 1620 |
struct ieee80211_channel *channel); |
| 1621 |
void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); |
| 1622 |
/* Spur mitigation */ |
| 1623 |
bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, |
| 1624 |
struct ieee80211_channel *channel); |
| 1625 |
/* Antenna control */ |
| 1626 |
void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode); |
| 1627 |
void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode); |
| 1628 |
/* TX power setup */ |
| 1629 |
int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower); |
| 1630 |
/* Init function */ |
| 1631 |
int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, |
| 1632 |
u8 mode, bool fast); |
| 1633 |
|
| 1634 |
/* |
| 1635 |
* Functions used internally |
| 1636 |
*/ |
| 1637 |
|
| 1638 |
static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah) |
| 1639 |
{ |
| 1640 |
return &ah->common; |
| 1641 |
} |
| 1642 |
|
| 1643 |
static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah) |
| 1644 |
{ |
| 1645 |
return &(ath5k_hw_common(ah)->regulatory); |
| 1646 |
} |
| 1647 |
|
| 1648 |
#ifdef CONFIG_ATH5K_AHB |
| 1649 |
#define AR5K_AR2315_PCI_BASE ((void __iomem *)0xb0100000) |
| 1650 |
|
| 1651 |
static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg) |
| 1652 |
{ |
| 1653 |
/* On AR2315 and AR2317 the PCI clock domain registers |
| 1654 |
* are outside of the WMAC register space */ |
| 1655 |
if (unlikely((reg >= 0x4000) && (reg < 0x5000) && |
| 1656 |
(ah->ah_mac_srev >= AR5K_SREV_AR2315_R6))) |
| 1657 |
return AR5K_AR2315_PCI_BASE + reg; |
| 1658 |
|
| 1659 |
return ah->iobase + reg; |
| 1660 |
} |
| 1661 |
|
| 1662 |
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) |
| 1663 |
{ |
| 1664 |
return ioread32(ath5k_ahb_reg(ah, reg)); |
| 1665 |
} |
| 1666 |
|
| 1667 |
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) |
| 1668 |
{ |
| 1669 |
iowrite32(val, ath5k_ahb_reg(ah, reg)); |
| 1670 |
} |
| 1671 |
|
| 1672 |
#else |
| 1673 |
|
| 1674 |
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) |
| 1675 |
{ |
| 1676 |
return ioread32(ah->iobase + reg); |
| 1677 |
} |
| 1678 |
|
| 1679 |
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) |
| 1680 |
{ |
| 1681 |
iowrite32(val, ah->iobase + reg); |
| 1682 |
} |
| 1683 |
|
| 1684 |
#endif |
| 1685 |
|
| 1686 |
static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah) |
| 1687 |
{ |
| 1688 |
return ath5k_hw_common(ah)->bus_ops->ath_bus_type; |
| 1689 |
} |
| 1690 |
|
| 1691 |
static inline void ath5k_read_cachesize(struct ath_common *common, int *csz) |
| 1692 |
{ |
| 1693 |
common->bus_ops->read_cachesize(common, csz); |
| 1694 |
} |
| 1695 |
|
| 1696 |
static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data) |
| 1697 |
{ |
| 1698 |
struct ath_common *common = ath5k_hw_common(ah); |
| 1699 |
return common->bus_ops->eeprom_read(common, off, data); |
| 1700 |
} |
| 1701 |
|
| 1702 |
static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) |
| 1703 |
{ |
| 1704 |
u32 retval = 0, bit, i; |
| 1705 |
|
| 1706 |
for (i = 0; i < bits; i++) { |
| 1707 |
bit = (val >> i) & 1; |
| 1708 |
retval = (retval << 1) | bit; |
| 1709 |
} |
| 1710 |
|
| 1711 |
return retval; |
| 1712 |
} |
| 1713 |
|
| 1714 |
#endif |