| 1 |
/* |
| 2 |
* Copyright (c) 2008-2009 Atheros Communications Inc. |
| 3 |
* |
| 4 |
* Permission to use, copy, modify, and/or distribute this software for any |
| 5 |
* purpose with or without fee is hereby granted, provided that the above |
| 6 |
* copyright notice and this permission notice appear in all copies. |
| 7 |
* |
| 8 |
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| 9 |
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| 10 |
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| 11 |
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| 12 |
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| 13 |
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| 14 |
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| 15 |
*/ |
| 16 |
|
| 17 |
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 18 |
|
| 19 |
#include <linux/nl80211.h> |
| 20 |
#include <linux/pci.h> |
| 21 |
#include <linux/etherdevice.h> |
| 22 |
#include <linux/module.h> |
| 23 |
#include "../ath.h" |
| 24 |
#include "ath5k.h" |
| 25 |
#include "debug.h" |
| 26 |
#include "base.h" |
| 27 |
#include "reg.h" |
| 28 |
|
| 29 |
/* Known PCI ids */ |
| 30 |
static const struct pci_device_id ath5k_pci_id_table[] = { |
| 31 |
{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */ |
| 32 |
{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */ |
| 33 |
{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/ |
| 34 |
{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */ |
| 35 |
{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */ |
| 36 |
{ PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */ |
| 37 |
{ PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */ |
| 38 |
{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */ |
| 39 |
{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 compatible */ |
| 40 |
{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 compatible */ |
| 41 |
{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 compatible */ |
| 42 |
{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 compatible */ |
| 43 |
{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 compatible */ |
| 44 |
{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 compatible */ |
| 45 |
{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */ |
| 46 |
{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */ |
| 47 |
{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */ |
| 48 |
{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */ |
| 49 |
{ PCI_VDEVICE(ATHEROS, 0xff16) }, /* Gigaset SX76[23] AR241[34]A */ |
| 50 |
{ PCI_VDEVICE(ATHEROS, 0xff1a) }, /* Arcadyan ARV45XX AR2417 */ |
| 51 |
{ PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */ |
| 52 |
{ 0 } |
| 53 |
}; |
| 54 |
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table); |
| 55 |
|
| 56 |
/* return bus cachesize in 4B word units */ |
| 57 |
static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz) |
| 58 |
{ |
| 59 |
struct ath5k_hw *ah = common->priv; |
| 60 |
u8 u8tmp; |
| 61 |
|
| 62 |
pci_read_config_byte(ah->pdev, PCI_CACHE_LINE_SIZE, &u8tmp); |
| 63 |
*csz = (int)u8tmp; |
| 64 |
|
| 65 |
/* |
| 66 |
* This check was put in to avoid "unpleasant" consequences if |
| 67 |
* the bootrom has not fully initialized all PCI devices. |
| 68 |
* Sometimes the cache line size register is not set |
| 69 |
*/ |
| 70 |
|
| 71 |
if (*csz == 0) |
| 72 |
*csz = L1_CACHE_BYTES >> 2; /* Use the default size */ |
| 73 |
} |
| 74 |
|
| 75 |
/* |
| 76 |
* Read from eeprom |
| 77 |
*/ |
| 78 |
static bool |
| 79 |
ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data) |
| 80 |
{ |
| 81 |
struct ath5k_hw *ah = common->ah; |
| 82 |
u32 status, timeout; |
| 83 |
|
| 84 |
/* |
| 85 |
* Initialize EEPROM access |
| 86 |
*/ |
| 87 |
if (ah->ah_version == AR5K_AR5210) { |
| 88 |
AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); |
| 89 |
(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); |
| 90 |
} else { |
| 91 |
ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); |
| 92 |
AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, |
| 93 |
AR5K_EEPROM_CMD_READ); |
| 94 |
} |
| 95 |
|
| 96 |
for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { |
| 97 |
status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); |
| 98 |
if (status & AR5K_EEPROM_STAT_RDDONE) { |
| 99 |
if (status & AR5K_EEPROM_STAT_RDERR) |
| 100 |
return false; |
| 101 |
*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & |
| 102 |
0xffff); |
| 103 |
return true; |
| 104 |
} |
| 105 |
usleep_range(15, 20); |
| 106 |
} |
| 107 |
|
| 108 |
return false; |
| 109 |
} |
| 110 |
|
| 111 |
int ath5k_hw_read_srev(struct ath5k_hw *ah) |
| 112 |
{ |
| 113 |
ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV); |
| 114 |
return 0; |
| 115 |
} |
| 116 |
|
| 117 |
/* |
| 118 |
* Read the MAC address from eeprom or platform_data |
| 119 |
*/ |
| 120 |
static int ath5k_pci_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) |
| 121 |
{ |
| 122 |
u8 mac_d[ETH_ALEN] = {}; |
| 123 |
u32 total, offset; |
| 124 |
u16 data; |
| 125 |
int octet; |
| 126 |
|
| 127 |
AR5K_EEPROM_READ(0x20, data); |
| 128 |
|
| 129 |
for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { |
| 130 |
AR5K_EEPROM_READ(offset, data); |
| 131 |
|
| 132 |
total += data; |
| 133 |
mac_d[octet + 1] = data & 0xff; |
| 134 |
mac_d[octet] = data >> 8; |
| 135 |
octet += 2; |
| 136 |
} |
| 137 |
|
| 138 |
if (!total || total == 3 * 0xffff) |
| 139 |
return -EINVAL; |
| 140 |
|
| 141 |
memcpy(mac, mac_d, ETH_ALEN); |
| 142 |
|
| 143 |
return 0; |
| 144 |
} |
| 145 |
|
| 146 |
|
| 147 |
/* Common ath_bus_opts structure */ |
| 148 |
static const struct ath_bus_ops ath_pci_bus_ops = { |
| 149 |
.ath_bus_type = ATH_PCI, |
| 150 |
.read_cachesize = ath5k_pci_read_cachesize, |
| 151 |
.eeprom_read = ath5k_pci_eeprom_read, |
| 152 |
.eeprom_read_mac = ath5k_pci_eeprom_read_mac, |
| 153 |
}; |
| 154 |
|
| 155 |
/********************\ |
| 156 |
* PCI Initialization * |
| 157 |
\********************/ |
| 158 |
|
| 159 |
static int |
| 160 |
ath5k_pci_probe(struct pci_dev *pdev, |
| 161 |
const struct pci_device_id *id) |
| 162 |
{ |
| 163 |
void __iomem *mem; |
| 164 |
struct ath5k_hw *ah; |
| 165 |
struct ieee80211_hw *hw; |
| 166 |
int ret; |
| 167 |
u8 csz; |
| 168 |
|
| 169 |
/* |
| 170 |
* L0s needs to be disabled on all ath5k cards. |
| 171 |
* |
| 172 |
* For distributions shipping with CONFIG_PCIEASPM (this will be enabled |
| 173 |
* by default in the future in 2.6.36) this will also mean both L1 and |
| 174 |
* L0s will be disabled when a pre 1.1 PCIe device is detected. We do |
| 175 |
* know L1 works correctly even for all ath5k pre 1.1 PCIe devices |
| 176 |
* though but cannot currently undue the effect of a blacklist, for |
| 177 |
* details you can read pcie_aspm_sanity_check() and see how it adjusts |
| 178 |
* the device link capability. |
| 179 |
* |
| 180 |
* It may be possible in the future to implement some PCI API to allow |
| 181 |
* drivers to override blacklists for pre 1.1 PCIe but for now it is |
| 182 |
* best to accept that both L0s and L1 will be disabled completely for |
| 183 |
* distributions shipping with CONFIG_PCIEASPM rather than having this |
| 184 |
* issue present. Motivation for adding this new API will be to help |
| 185 |
* with power consumption for some of these devices. |
| 186 |
*/ |
| 187 |
pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); |
| 188 |
|
| 189 |
ret = pci_enable_device(pdev); |
| 190 |
if (ret) { |
| 191 |
dev_err(&pdev->dev, "can't enable device\n"); |
| 192 |
goto err; |
| 193 |
} |
| 194 |
|
| 195 |
/* XXX 32-bit addressing only */ |
| 196 |
ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| 197 |
if (ret) { |
| 198 |
dev_err(&pdev->dev, "32-bit DMA not available\n"); |
| 199 |
goto err_dis; |
| 200 |
} |
| 201 |
|
| 202 |
/* |
| 203 |
* Cache line size is used to size and align various |
| 204 |
* structures used to communicate with the hardware. |
| 205 |
*/ |
| 206 |
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); |
| 207 |
if (csz == 0) { |
| 208 |
/* |
| 209 |
* Linux 2.4.18 (at least) writes the cache line size |
| 210 |
* register as a 16-bit wide register which is wrong. |
| 211 |
* We must have this setup properly for rx buffer |
| 212 |
* DMA to work so force a reasonable value here if it |
| 213 |
* comes up zero. |
| 214 |
*/ |
| 215 |
csz = L1_CACHE_BYTES >> 2; |
| 216 |
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); |
| 217 |
} |
| 218 |
/* |
| 219 |
* The default setting of latency timer yields poor results, |
| 220 |
* set it to the value used by other systems. It may be worth |
| 221 |
* tweaking this setting more. |
| 222 |
*/ |
| 223 |
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); |
| 224 |
|
| 225 |
/* Enable bus mastering */ |
| 226 |
pci_set_master(pdev); |
| 227 |
|
| 228 |
/* |
| 229 |
* Disable the RETRY_TIMEOUT register (0x41) to keep |
| 230 |
* PCI Tx retries from interfering with C3 CPU state. |
| 231 |
*/ |
| 232 |
pci_write_config_byte(pdev, 0x41, 0); |
| 233 |
|
| 234 |
ret = pci_request_region(pdev, 0, "ath5k"); |
| 235 |
if (ret) { |
| 236 |
dev_err(&pdev->dev, "cannot reserve PCI memory region\n"); |
| 237 |
goto err_dis; |
| 238 |
} |
| 239 |
|
| 240 |
mem = pci_iomap(pdev, 0, 0); |
| 241 |
if (!mem) { |
| 242 |
dev_err(&pdev->dev, "cannot remap PCI memory region\n"); |
| 243 |
ret = -EIO; |
| 244 |
goto err_reg; |
| 245 |
} |
| 246 |
|
| 247 |
/* |
| 248 |
* Allocate hw (mac80211 main struct) |
| 249 |
* and hw->priv (driver private data) |
| 250 |
*/ |
| 251 |
hw = ieee80211_alloc_hw(sizeof(*ah), &ath5k_hw_ops); |
| 252 |
if (hw == NULL) { |
| 253 |
dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n"); |
| 254 |
ret = -ENOMEM; |
| 255 |
goto err_map; |
| 256 |
} |
| 257 |
|
| 258 |
dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy)); |
| 259 |
|
| 260 |
ah = hw->priv; |
| 261 |
ah->hw = hw; |
| 262 |
ah->pdev = pdev; |
| 263 |
ah->dev = &pdev->dev; |
| 264 |
ah->irq = pdev->irq; |
| 265 |
ah->devid = id->device; |
| 266 |
ah->iobase = mem; /* So we can unmap it on detach */ |
| 267 |
|
| 268 |
/* Initialize */ |
| 269 |
ret = ath5k_init_ah(ah, &ath_pci_bus_ops); |
| 270 |
if (ret) |
| 271 |
goto err_free; |
| 272 |
|
| 273 |
/* Set private data */ |
| 274 |
pci_set_drvdata(pdev, hw); |
| 275 |
|
| 276 |
return 0; |
| 277 |
err_free: |
| 278 |
ieee80211_free_hw(hw); |
| 279 |
err_map: |
| 280 |
pci_iounmap(pdev, mem); |
| 281 |
err_reg: |
| 282 |
pci_release_region(pdev, 0); |
| 283 |
err_dis: |
| 284 |
pci_disable_device(pdev); |
| 285 |
err: |
| 286 |
return ret; |
| 287 |
} |
| 288 |
|
| 289 |
static void |
| 290 |
ath5k_pci_remove(struct pci_dev *pdev) |
| 291 |
{ |
| 292 |
struct ieee80211_hw *hw = pci_get_drvdata(pdev); |
| 293 |
struct ath5k_hw *ah = hw->priv; |
| 294 |
|
| 295 |
ath5k_deinit_ah(ah); |
| 296 |
pci_iounmap(pdev, ah->iobase); |
| 297 |
pci_release_region(pdev, 0); |
| 298 |
pci_disable_device(pdev); |
| 299 |
ieee80211_free_hw(hw); |
| 300 |
} |
| 301 |
|
| 302 |
#ifdef CONFIG_PM_SLEEP |
| 303 |
static int ath5k_pci_suspend(struct device *dev) |
| 304 |
{ |
| 305 |
struct ieee80211_hw *hw = dev_get_drvdata(dev); |
| 306 |
struct ath5k_hw *ah = hw->priv; |
| 307 |
|
| 308 |
ath5k_led_off(ah); |
| 309 |
return 0; |
| 310 |
} |
| 311 |
|
| 312 |
static int ath5k_pci_resume(struct device *dev) |
| 313 |
{ |
| 314 |
struct pci_dev *pdev = to_pci_dev(dev); |
| 315 |
struct ieee80211_hw *hw = pci_get_drvdata(pdev); |
| 316 |
struct ath5k_hw *ah = hw->priv; |
| 317 |
|
| 318 |
/* |
| 319 |
* Suspend/Resume resets the PCI configuration space, so we have to |
| 320 |
* re-disable the RETRY_TIMEOUT register (0x41) to keep |
| 321 |
* PCI Tx retries from interfering with C3 CPU state |
| 322 |
*/ |
| 323 |
pci_write_config_byte(pdev, 0x41, 0); |
| 324 |
|
| 325 |
ath5k_led_enable(ah); |
| 326 |
return 0; |
| 327 |
} |
| 328 |
|
| 329 |
static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume); |
| 330 |
#define ATH5K_PM_OPS (&ath5k_pm_ops) |
| 331 |
#else |
| 332 |
#define ATH5K_PM_OPS NULL |
| 333 |
#endif /* CONFIG_PM_SLEEP */ |
| 334 |
|
| 335 |
static struct pci_driver ath5k_pci_driver = { |
| 336 |
.name = KBUILD_MODNAME, |
| 337 |
.id_table = ath5k_pci_id_table, |
| 338 |
.probe = ath5k_pci_probe, |
| 339 |
.remove = ath5k_pci_remove, |
| 340 |
.driver.pm = ATH5K_PM_OPS, |
| 341 |
}; |
| 342 |
|
| 343 |
module_pci_driver(ath5k_pci_driver); |