| 1 |
// SPDX-License-Identifier: ISC |
| 2 |
/* |
| 3 |
* Copyright (c) 2014-2015 Qualcomm Atheros, Inc. |
| 4 |
* Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <linux/device.h> |
| 8 |
#include <linux/sysfs.h> |
| 9 |
#include <linux/thermal.h> |
| 10 |
#include <linux/hwmon.h> |
| 11 |
#include <linux/hwmon-sysfs.h> |
| 12 |
#include "core.h" |
| 13 |
#include "debug.h" |
| 14 |
#include "wmi-ops.h" |
| 15 |
|
| 16 |
static int |
| 17 |
ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev, |
| 18 |
unsigned long *state) |
| 19 |
{ |
| 20 |
*state = ATH10K_THERMAL_THROTTLE_MAX; |
| 21 |
|
| 22 |
return 0; |
| 23 |
} |
| 24 |
|
| 25 |
static int |
| 26 |
ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev, |
| 27 |
unsigned long *state) |
| 28 |
{ |
| 29 |
struct ath10k *ar = cdev->devdata; |
| 30 |
|
| 31 |
mutex_lock(&ar->conf_mutex); |
| 32 |
*state = ar->thermal.throttle_state; |
| 33 |
mutex_unlock(&ar->conf_mutex); |
| 34 |
|
| 35 |
return 0; |
| 36 |
} |
| 37 |
|
| 38 |
static int |
| 39 |
ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, |
| 40 |
unsigned long throttle_state) |
| 41 |
{ |
| 42 |
struct ath10k *ar = cdev->devdata; |
| 43 |
|
| 44 |
if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) { |
| 45 |
ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n", |
| 46 |
throttle_state, ATH10K_THERMAL_THROTTLE_MAX); |
| 47 |
return -EINVAL; |
| 48 |
} |
| 49 |
mutex_lock(&ar->conf_mutex); |
| 50 |
ar->thermal.throttle_state = throttle_state; |
| 51 |
ath10k_thermal_set_throttling(ar); |
| 52 |
mutex_unlock(&ar->conf_mutex); |
| 53 |
return 0; |
| 54 |
} |
| 55 |
|
| 56 |
static const struct thermal_cooling_device_ops ath10k_thermal_ops = { |
| 57 |
.get_max_state = ath10k_thermal_get_max_throttle_state, |
| 58 |
.get_cur_state = ath10k_thermal_get_cur_throttle_state, |
| 59 |
.set_cur_state = ath10k_thermal_set_cur_throttle_state, |
| 60 |
}; |
| 61 |
|
| 62 |
static ssize_t ath10k_thermal_show_temp(struct device *dev, |
| 63 |
struct device_attribute *attr, |
| 64 |
char *buf) |
| 65 |
{ |
| 66 |
struct ath10k *ar = dev_get_drvdata(dev); |
| 67 |
int ret, temperature; |
| 68 |
unsigned long time_left; |
| 69 |
|
| 70 |
mutex_lock(&ar->conf_mutex); |
| 71 |
|
| 72 |
/* Can't get temperature when the card is off */ |
| 73 |
if (ar->state != ATH10K_STATE_ON) { |
| 74 |
ret = -ENETDOWN; |
| 75 |
goto out; |
| 76 |
} |
| 77 |
|
| 78 |
reinit_completion(&ar->thermal.wmi_sync); |
| 79 |
ret = ath10k_wmi_pdev_get_temperature(ar); |
| 80 |
if (ret) { |
| 81 |
ath10k_warn(ar, "failed to read temperature %d\n", ret); |
| 82 |
goto out; |
| 83 |
} |
| 84 |
|
| 85 |
if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) { |
| 86 |
ret = -ESHUTDOWN; |
| 87 |
goto out; |
| 88 |
} |
| 89 |
|
| 90 |
time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync, |
| 91 |
ATH10K_THERMAL_SYNC_TIMEOUT_HZ); |
| 92 |
if (!time_left) { |
| 93 |
ath10k_warn(ar, "failed to synchronize thermal read\n"); |
| 94 |
ret = -ETIMEDOUT; |
| 95 |
goto out; |
| 96 |
} |
| 97 |
|
| 98 |
spin_lock_bh(&ar->data_lock); |
| 99 |
temperature = ar->thermal.temperature; |
| 100 |
spin_unlock_bh(&ar->data_lock); |
| 101 |
|
| 102 |
/* display in millidegree celsius */ |
| 103 |
ret = sysfs_emit(buf, "%d\n", temperature * 1000); |
| 104 |
out: |
| 105 |
mutex_unlock(&ar->conf_mutex); |
| 106 |
return ret; |
| 107 |
} |
| 108 |
|
| 109 |
void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature) |
| 110 |
{ |
| 111 |
spin_lock_bh(&ar->data_lock); |
| 112 |
ar->thermal.temperature = temperature; |
| 113 |
spin_unlock_bh(&ar->data_lock); |
| 114 |
complete(&ar->thermal.wmi_sync); |
| 115 |
} |
| 116 |
|
| 117 |
static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath10k_thermal_show_temp, |
| 118 |
NULL, 0); |
| 119 |
|
| 120 |
static struct attribute *ath10k_hwmon_attrs[] = { |
| 121 |
&sensor_dev_attr_temp1_input.dev_attr.attr, |
| 122 |
NULL, |
| 123 |
}; |
| 124 |
ATTRIBUTE_GROUPS(ath10k_hwmon); |
| 125 |
|
| 126 |
void ath10k_thermal_set_throttling(struct ath10k *ar) |
| 127 |
{ |
| 128 |
u32 period, duration, enabled; |
| 129 |
int ret; |
| 130 |
|
| 131 |
lockdep_assert_held(&ar->conf_mutex); |
| 132 |
|
| 133 |
if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) |
| 134 |
return; |
| 135 |
|
| 136 |
if (!ar->wmi.ops->gen_pdev_set_quiet_mode) |
| 137 |
return; |
| 138 |
|
| 139 |
if (ar->state != ATH10K_STATE_ON) |
| 140 |
return; |
| 141 |
|
| 142 |
period = ar->thermal.quiet_period; |
| 143 |
duration = (period * ar->thermal.throttle_state) / 100; |
| 144 |
enabled = duration ? 1 : 0; |
| 145 |
|
| 146 |
ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration, |
| 147 |
ATH10K_QUIET_START_OFFSET, |
| 148 |
enabled); |
| 149 |
if (ret) { |
| 150 |
ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n", |
| 151 |
period, duration, enabled, ret); |
| 152 |
} |
| 153 |
} |
| 154 |
|
| 155 |
int ath10k_thermal_register(struct ath10k *ar) |
| 156 |
{ |
| 157 |
struct thermal_cooling_device *cdev; |
| 158 |
struct device *hwmon_dev; |
| 159 |
int ret; |
| 160 |
|
| 161 |
if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) |
| 162 |
return 0; |
| 163 |
|
| 164 |
cdev = thermal_cooling_device_register("ath10k_thermal", ar, |
| 165 |
&ath10k_thermal_ops); |
| 166 |
|
| 167 |
if (IS_ERR(cdev)) { |
| 168 |
ath10k_err(ar, "failed to setup thermal device result: %ld\n", |
| 169 |
PTR_ERR(cdev)); |
| 170 |
return -EINVAL; |
| 171 |
} |
| 172 |
|
| 173 |
ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj, |
| 174 |
"cooling_device"); |
| 175 |
if (ret) { |
| 176 |
ath10k_err(ar, "failed to create cooling device symlink\n"); |
| 177 |
goto err_cooling_destroy; |
| 178 |
} |
| 179 |
|
| 180 |
ar->thermal.cdev = cdev; |
| 181 |
ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT; |
| 182 |
|
| 183 |
/* Do not register hwmon device when temperature reading is not |
| 184 |
* supported by firmware |
| 185 |
*/ |
| 186 |
if (!(ar->wmi.ops->gen_pdev_get_temperature)) |
| 187 |
return 0; |
| 188 |
|
| 189 |
/* Avoid linking error on devm_hwmon_device_register_with_groups, I |
| 190 |
* guess linux/hwmon.h is missing proper stubs. |
| 191 |
*/ |
| 192 |
if (!IS_REACHABLE(CONFIG_HWMON)) |
| 193 |
return 0; |
| 194 |
|
| 195 |
hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, |
| 196 |
"ath10k_hwmon", ar, |
| 197 |
ath10k_hwmon_groups); |
| 198 |
if (IS_ERR(hwmon_dev)) { |
| 199 |
ath10k_err(ar, "failed to register hwmon device: %ld\n", |
| 200 |
PTR_ERR(hwmon_dev)); |
| 201 |
ret = -EINVAL; |
| 202 |
goto err_remove_link; |
| 203 |
} |
| 204 |
return 0; |
| 205 |
|
| 206 |
err_remove_link: |
| 207 |
sysfs_remove_link(&ar->dev->kobj, "cooling_device"); |
| 208 |
err_cooling_destroy: |
| 209 |
thermal_cooling_device_unregister(cdev); |
| 210 |
return ret; |
| 211 |
} |
| 212 |
|
| 213 |
void ath10k_thermal_unregister(struct ath10k *ar) |
| 214 |
{ |
| 215 |
if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map)) |
| 216 |
return; |
| 217 |
|
| 218 |
sysfs_remove_link(&ar->dev->kobj, "cooling_device"); |
| 219 |
thermal_cooling_device_unregister(ar->thermal.cdev); |
| 220 |
} |