Debian Codegraph @

drivers/net/wireless/ath/ath10k/testmode_i.h

raw
1 /* SPDX-License-Identifier: ISC */
2 /*
3 * Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
4 * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
5 */
6
7 /* "API" level of the ath10k testmode interface. Bump it after every
8 * incompatible interface change.
9 */
10 #define ATH10K_TESTMODE_VERSION_MAJOR 1
11
12 /* Bump this after every _compatible_ interface change, for example
13 * addition of a new command or an attribute.
14 */
15 #define ATH10K_TESTMODE_VERSION_MINOR 0
16
17 #define ATH10K_TM_DATA_MAX_LEN 5000
18 #define ATH_FTM_EVENT_MAX_BUF_LENGTH 2048
19
20 enum ath10k_tm_attr {
21 __ATH10K_TM_ATTR_INVALID = 0,
22 ATH10K_TM_ATTR_CMD = 1,
23 ATH10K_TM_ATTR_DATA = 2,
24 ATH10K_TM_ATTR_WMI_CMDID = 3,
25 ATH10K_TM_ATTR_VERSION_MAJOR = 4,
26 ATH10K_TM_ATTR_VERSION_MINOR = 5,
27 ATH10K_TM_ATTR_WMI_OP_VERSION = 6,
28
29 /* keep last */
30 __ATH10K_TM_ATTR_AFTER_LAST,
31 ATH10K_TM_ATTR_MAX = __ATH10K_TM_ATTR_AFTER_LAST - 1,
32 };
33
34 /* All ath10k testmode interface commands specified in
35 * ATH10K_TM_ATTR_CMD
36 */
37 enum ath10k_tm_cmd {
38 /* Returns the supported ath10k testmode interface version in
39 * ATH10K_TM_ATTR_VERSION. Always guaranteed to work. User space
40 * uses this to verify it's using the correct version of the
41 * testmode interface
42 */
43 ATH10K_TM_CMD_GET_VERSION = 0,
44
45 /* Boots the UTF firmware, the netdev interface must be down at the
46 * time.
47 */
48 ATH10K_TM_CMD_UTF_START = 1,
49
50 /* Shuts down the UTF firmware and puts the driver back into OFF
51 * state.
52 */
53 ATH10K_TM_CMD_UTF_STOP = 2,
54
55 /* The command used to transmit a WMI command to the firmware and
56 * the event to receive WMI events from the firmware. Without
57 * struct wmi_cmd_hdr header, only the WMI payload. Command id is
58 * provided with ATH10K_TM_ATTR_WMI_CMDID and payload in
59 * ATH10K_TM_ATTR_DATA.
60 */
61 ATH10K_TM_CMD_WMI = 3,
62
63 /* The command used to transmit a test command to the firmware
64 * and the event to receive test events from the firmware. The data
65 * received only contain the TLV payload, need to add the tlv header
66 * and send the cmd to firmware with command id WMI_PDEV_UTF_CMDID.
67 * The data payload size could be large and the driver needs to
68 * send segmented data to firmware.
69 *
70 * This legacy testmode command shares the same value as the get-version
71 * command. To distinguish between them, we check whether the data attribute
72 * is present.
73 */
74 ATH10K_TM_CMD_TLV = ATH10K_TM_CMD_GET_VERSION,
75 };