| 1 |
/* SPDX-License-Identifier: ISC */ |
| 2 |
/* |
| 3 |
* Copyright (c) 2005-2011 Atheros Communications Inc. |
| 4 |
* Copyright (c) 2011-2016 Qualcomm Atheros, Inc. |
| 5 |
*/ |
| 6 |
|
| 7 |
#ifndef __TARGADDRS_H__ |
| 8 |
#define __TARGADDRS_H__ |
| 9 |
|
| 10 |
#include "hw.h" |
| 11 |
|
| 12 |
/* |
| 13 |
* xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the |
| 14 |
* host_interest structure. It must match the address of the _host_interest |
| 15 |
* symbol (see linker script). |
| 16 |
* |
| 17 |
* Host Interest is shared between Host and Target in order to coordinate |
| 18 |
* between the two, and is intended to remain constant (with additions only |
| 19 |
* at the end) across software releases. |
| 20 |
* |
| 21 |
* All addresses are available here so that it's possible to |
| 22 |
* write a single binary that works with all Target Types. |
| 23 |
* May be used in assembler code as well as C. |
| 24 |
*/ |
| 25 |
#define QCA988X_HOST_INTEREST_ADDRESS 0x00400800 |
| 26 |
#define HOST_INTEREST_MAX_SIZE 0x200 |
| 27 |
|
| 28 |
/* |
| 29 |
* These are items that the Host may need to access via BMI or via the |
| 30 |
* Diagnostic Window. The position of items in this structure must remain |
| 31 |
* constant across firmware revisions! Types for each item must be fixed |
| 32 |
* size across target and host platforms. More items may be added at the end. |
| 33 |
*/ |
| 34 |
struct host_interest { |
| 35 |
/* |
| 36 |
* Pointer to application-defined area, if any. |
| 37 |
* Set by Target application during startup. |
| 38 |
*/ |
| 39 |
u32 hi_app_host_interest; /* 0x00 */ |
| 40 |
|
| 41 |
/* Pointer to register dump area, valid after Target crash. */ |
| 42 |
u32 hi_failure_state; /* 0x04 */ |
| 43 |
|
| 44 |
/* Pointer to debug logging header */ |
| 45 |
u32 hi_dbglog_hdr; /* 0x08 */ |
| 46 |
|
| 47 |
u32 hi_unused0c; /* 0x0c */ |
| 48 |
|
| 49 |
/* |
| 50 |
* General-purpose flag bits, similar to SOC_OPTION_* flags. |
| 51 |
* Can be used by application rather than by OS. |
| 52 |
*/ |
| 53 |
u32 hi_option_flag; /* 0x10 */ |
| 54 |
|
| 55 |
/* |
| 56 |
* Boolean that determines whether or not to |
| 57 |
* display messages on the serial port. |
| 58 |
*/ |
| 59 |
u32 hi_serial_enable; /* 0x14 */ |
| 60 |
|
| 61 |
/* Start address of DataSet index, if any */ |
| 62 |
u32 hi_dset_list_head; /* 0x18 */ |
| 63 |
|
| 64 |
/* Override Target application start address */ |
| 65 |
u32 hi_app_start; /* 0x1c */ |
| 66 |
|
| 67 |
/* Clock and voltage tuning */ |
| 68 |
u32 hi_skip_clock_init; /* 0x20 */ |
| 69 |
u32 hi_core_clock_setting; /* 0x24 */ |
| 70 |
u32 hi_cpu_clock_setting; /* 0x28 */ |
| 71 |
u32 hi_system_sleep_setting; /* 0x2c */ |
| 72 |
u32 hi_xtal_control_setting; /* 0x30 */ |
| 73 |
u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ |
| 74 |
u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ |
| 75 |
u32 hi_ref_voltage_trim_setting; /* 0x3c */ |
| 76 |
u32 hi_clock_info; /* 0x40 */ |
| 77 |
|
| 78 |
/* Host uses BE CPU or not */ |
| 79 |
u32 hi_be; /* 0x44 */ |
| 80 |
|
| 81 |
u32 hi_stack; /* normal stack */ /* 0x48 */ |
| 82 |
u32 hi_err_stack; /* error stack */ /* 0x4c */ |
| 83 |
u32 hi_desired_cpu_speed_hz; /* 0x50 */ |
| 84 |
|
| 85 |
/* Pointer to Board Data */ |
| 86 |
u32 hi_board_data; /* 0x54 */ |
| 87 |
|
| 88 |
/* |
| 89 |
* Indication of Board Data state: |
| 90 |
* 0: board data is not yet initialized. |
| 91 |
* 1: board data is initialized; unknown size |
| 92 |
* >1: number of bytes of initialized board data |
| 93 |
*/ |
| 94 |
u32 hi_board_data_initialized; /* 0x58 */ |
| 95 |
|
| 96 |
u32 hi_dset_ram_index_table; /* 0x5c */ |
| 97 |
|
| 98 |
u32 hi_desired_baud_rate; /* 0x60 */ |
| 99 |
u32 hi_dbglog_config; /* 0x64 */ |
| 100 |
u32 hi_end_ram_reserve_sz; /* 0x68 */ |
| 101 |
u32 hi_mbox_io_block_sz; /* 0x6c */ |
| 102 |
|
| 103 |
u32 hi_num_bpatch_streams; /* 0x70 -- unused */ |
| 104 |
u32 hi_mbox_isr_yield_limit; /* 0x74 */ |
| 105 |
|
| 106 |
u32 hi_refclk_hz; /* 0x78 */ |
| 107 |
u32 hi_ext_clk_detected; /* 0x7c */ |
| 108 |
u32 hi_dbg_uart_txpin; /* 0x80 */ |
| 109 |
u32 hi_dbg_uart_rxpin; /* 0x84 */ |
| 110 |
u32 hi_hci_uart_baud; /* 0x88 */ |
| 111 |
u32 hi_hci_uart_pin_assignments; /* 0x8C */ |
| 112 |
|
| 113 |
u32 hi_hci_uart_baud_scale_val; /* 0x90 */ |
| 114 |
u32 hi_hci_uart_baud_step_val; /* 0x94 */ |
| 115 |
|
| 116 |
u32 hi_allocram_start; /* 0x98 */ |
| 117 |
u32 hi_allocram_sz; /* 0x9c */ |
| 118 |
u32 hi_hci_bridge_flags; /* 0xa0 */ |
| 119 |
u32 hi_hci_uart_support_pins; /* 0xa4 */ |
| 120 |
|
| 121 |
u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ |
| 122 |
|
| 123 |
/* |
| 124 |
* 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high |
| 125 |
* [31:16]: wakeup timeout in ms |
| 126 |
*/ |
| 127 |
/* Pointer to extended board Data */ |
| 128 |
u32 hi_board_ext_data; /* 0xac */ |
| 129 |
u32 hi_board_ext_data_config; /* 0xb0 */ |
| 130 |
/* |
| 131 |
* Bit [0] : valid |
| 132 |
* Bit[31:16: size |
| 133 |
*/ |
| 134 |
/* |
| 135 |
* hi_reset_flag is used to do some stuff when target reset. |
| 136 |
* such as restore app_start after warm reset or |
| 137 |
* preserve host Interest area, or preserve ROM data, literals etc. |
| 138 |
*/ |
| 139 |
u32 hi_reset_flag; /* 0xb4 */ |
| 140 |
/* indicate hi_reset_flag is valid */ |
| 141 |
u32 hi_reset_flag_valid; /* 0xb8 */ |
| 142 |
u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */ |
| 143 |
/* 0xbc - [31:0]: idle timeout in ms */ |
| 144 |
/* ACS flags */ |
| 145 |
u32 hi_acs_flags; /* 0xc0 */ |
| 146 |
u32 hi_console_flags; /* 0xc4 */ |
| 147 |
u32 hi_nvram_state; /* 0xc8 */ |
| 148 |
u32 hi_option_flag2; /* 0xcc */ |
| 149 |
|
| 150 |
/* If non-zero, override values sent to Host in WMI_READY event. */ |
| 151 |
u32 hi_sw_version_override; /* 0xd0 */ |
| 152 |
u32 hi_abi_version_override; /* 0xd4 */ |
| 153 |
|
| 154 |
/* |
| 155 |
* Percentage of high priority RX traffic to total expected RX traffic |
| 156 |
* applicable only to ar6004 |
| 157 |
*/ |
| 158 |
u32 hi_hp_rx_traffic_ratio; /* 0xd8 */ |
| 159 |
|
| 160 |
/* test applications flags */ |
| 161 |
u32 hi_test_apps_related; /* 0xdc */ |
| 162 |
/* location of test script */ |
| 163 |
u32 hi_ota_testscript; /* 0xe0 */ |
| 164 |
/* location of CAL data */ |
| 165 |
u32 hi_cal_data; /* 0xe4 */ |
| 166 |
|
| 167 |
/* Number of packet log buffers */ |
| 168 |
u32 hi_pktlog_num_buffers; /* 0xe8 */ |
| 169 |
|
| 170 |
/* wow extension configuration */ |
| 171 |
u32 hi_wow_ext_config; /* 0xec */ |
| 172 |
u32 hi_pwr_save_flags; /* 0xf0 */ |
| 173 |
|
| 174 |
/* Spatial Multiplexing Power Save (SMPS) options */ |
| 175 |
u32 hi_smps_options; /* 0xf4 */ |
| 176 |
|
| 177 |
/* Interconnect-specific state */ |
| 178 |
u32 hi_interconnect_state; /* 0xf8 */ |
| 179 |
|
| 180 |
/* Coex configuration flags */ |
| 181 |
u32 hi_coex_config; /* 0xfc */ |
| 182 |
|
| 183 |
/* Early allocation support */ |
| 184 |
u32 hi_early_alloc; /* 0x100 */ |
| 185 |
/* FW swap field */ |
| 186 |
/* |
| 187 |
* Bits of this 32bit word will be used to pass specific swap |
| 188 |
* instruction to FW |
| 189 |
*/ |
| 190 |
/* |
| 191 |
* Bit 0 -- AP Nart descriptor no swap. When this bit is set |
| 192 |
* FW will not swap TX descriptor. Meaning packets are formed |
| 193 |
* on the target processor. |
| 194 |
*/ |
| 195 |
/* Bit 1 - unused */ |
| 196 |
u32 hi_fw_swap; /* 0x104 */ |
| 197 |
|
| 198 |
/* global arenas pointer address, used by host driver debug */ |
| 199 |
u32 hi_dynamic_mem_arenas_addr; /* 0x108 */ |
| 200 |
|
| 201 |
/* allocated bytes of DRAM use by allocated */ |
| 202 |
u32 hi_dynamic_mem_allocated; /* 0x10C */ |
| 203 |
|
| 204 |
/* remaining bytes of DRAM */ |
| 205 |
u32 hi_dynamic_mem_remaining; /* 0x110 */ |
| 206 |
|
| 207 |
/* memory track count, configured by host */ |
| 208 |
u32 hi_dynamic_mem_track_max; /* 0x114 */ |
| 209 |
|
| 210 |
/* minidump buffer */ |
| 211 |
u32 hi_minidump; /* 0x118 */ |
| 212 |
|
| 213 |
/* bdata's sig and key addr */ |
| 214 |
u32 hi_bd_sig_key; /* 0x11c */ |
| 215 |
} __packed; |
| 216 |
|
| 217 |
#define HI_ITEM(item) offsetof(struct host_interest, item) |
| 218 |
|
| 219 |
/* Bits defined in hi_option_flag */ |
| 220 |
|
| 221 |
/* Enable timer workaround */ |
| 222 |
#define HI_OPTION_TIMER_WAR 0x01 |
| 223 |
/* Limit BMI command credits */ |
| 224 |
#define HI_OPTION_BMI_CRED_LIMIT 0x02 |
| 225 |
/* Relay Dot11 hdr to/from host */ |
| 226 |
#define HI_OPTION_RELAY_DOT11_HDR 0x04 |
| 227 |
/* MAC addr method 0-locally administred 1-globally unique addrs */ |
| 228 |
#define HI_OPTION_MAC_ADDR_METHOD 0x08 |
| 229 |
/* Firmware Bridging */ |
| 230 |
#define HI_OPTION_FW_BRIDGE 0x10 |
| 231 |
/* Enable CPU profiling */ |
| 232 |
#define HI_OPTION_ENABLE_PROFILE 0x20 |
| 233 |
/* Disable debug logging */ |
| 234 |
#define HI_OPTION_DISABLE_DBGLOG 0x40 |
| 235 |
/* Skip Era Tracking */ |
| 236 |
#define HI_OPTION_SKIP_ERA_TRACKING 0x80 |
| 237 |
/* Disable PAPRD (debug) */ |
| 238 |
#define HI_OPTION_PAPRD_DISABLE 0x100 |
| 239 |
#define HI_OPTION_NUM_DEV_LSB 0x200 |
| 240 |
#define HI_OPTION_NUM_DEV_MSB 0x800 |
| 241 |
#define HI_OPTION_DEV_MODE_LSB 0x1000 |
| 242 |
#define HI_OPTION_DEV_MODE_MSB 0x8000000 |
| 243 |
/* Disable LowFreq Timer Stabilization */ |
| 244 |
#define HI_OPTION_NO_LFT_STBL 0x10000000 |
| 245 |
/* Skip regulatory scan */ |
| 246 |
#define HI_OPTION_SKIP_REG_SCAN 0x20000000 |
| 247 |
/* |
| 248 |
* Do regulatory scan during init before |
| 249 |
* sending WMI ready event to host |
| 250 |
*/ |
| 251 |
#define HI_OPTION_INIT_REG_SCAN 0x40000000 |
| 252 |
|
| 253 |
/* REV6: Do not adjust memory map */ |
| 254 |
#define HI_OPTION_SKIP_MEMMAP 0x80000000 |
| 255 |
|
| 256 |
#define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3 |
| 257 |
|
| 258 |
/* 2 bits of hi_option_flag are used to represent 3 modes */ |
| 259 |
#define HI_OPTION_FW_MODE_IBSS 0x0 /* IBSS Mode */ |
| 260 |
#define HI_OPTION_FW_MODE_BSS_STA 0x1 /* STA Mode */ |
| 261 |
#define HI_OPTION_FW_MODE_AP 0x2 /* AP Mode */ |
| 262 |
#define HI_OPTION_FW_MODE_BT30AMP 0x3 /* BT30 AMP Mode */ |
| 263 |
|
| 264 |
/* 2 bits of hi_option flag are usedto represent 4 submodes */ |
| 265 |
#define HI_OPTION_FW_SUBMODE_NONE 0x0 /* Normal mode */ |
| 266 |
#define HI_OPTION_FW_SUBMODE_P2PDEV 0x1 /* p2p device mode */ |
| 267 |
#define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 /* p2p client mode */ |
| 268 |
#define HI_OPTION_FW_SUBMODE_P2PGO 0x3 /* p2p go mode */ |
| 269 |
|
| 270 |
/* Num dev Mask */ |
| 271 |
#define HI_OPTION_NUM_DEV_MASK 0x7 |
| 272 |
#define HI_OPTION_NUM_DEV_SHIFT 0x9 |
| 273 |
|
| 274 |
/* firmware bridging */ |
| 275 |
#define HI_OPTION_FW_BRIDGE_SHIFT 0x04 |
| 276 |
|
| 277 |
/* |
| 278 |
* Fw Mode/SubMode Mask |
| 279 |
*----------------------------------------------------------------------------- |
| 280 |
* SUB | SUB | SUB | SUB | | | | |
| 281 |
*MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0] |
| 282 |
* (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) |
| 283 |
*----------------------------------------------------------------------------- |
| 284 |
*/ |
| 285 |
#define HI_OPTION_FW_MODE_BITS 0x2 |
| 286 |
#define HI_OPTION_FW_MODE_MASK 0x3 |
| 287 |
#define HI_OPTION_FW_MODE_SHIFT 0xC |
| 288 |
#define HI_OPTION_ALL_FW_MODE_MASK 0xFF |
| 289 |
|
| 290 |
#define HI_OPTION_FW_SUBMODE_BITS 0x2 |
| 291 |
#define HI_OPTION_FW_SUBMODE_MASK 0x3 |
| 292 |
#define HI_OPTION_FW_SUBMODE_SHIFT 0x14 |
| 293 |
#define HI_OPTION_ALL_FW_SUBMODE_MASK 0xFF00 |
| 294 |
#define HI_OPTION_ALL_FW_SUBMODE_SHIFT 0x8 |
| 295 |
|
| 296 |
/* hi_option_flag2 options */ |
| 297 |
#define HI_OPTION_OFFLOAD_AMSDU 0x01 |
| 298 |
#define HI_OPTION_DFS_SUPPORT 0x02 /* Enable DFS support */ |
| 299 |
#define HI_OPTION_ENABLE_RFKILL 0x04 /* RFKill Enable Feature*/ |
| 300 |
#define HI_OPTION_RADIO_RETENTION_DISABLE 0x08 /* Disable radio retention */ |
| 301 |
#define HI_OPTION_EARLY_CFG_DONE 0x10 /* Early configuration is complete */ |
| 302 |
|
| 303 |
#define HI_OPTION_RF_KILL_SHIFT 0x2 |
| 304 |
#define HI_OPTION_RF_KILL_MASK 0x1 |
| 305 |
|
| 306 |
/* hi_reset_flag */ |
| 307 |
/* preserve App Start address */ |
| 308 |
#define HI_RESET_FLAG_PRESERVE_APP_START 0x01 |
| 309 |
/* preserve host interest */ |
| 310 |
#define HI_RESET_FLAG_PRESERVE_HOST_INTEREST 0x02 |
| 311 |
/* preserve ROM data */ |
| 312 |
#define HI_RESET_FLAG_PRESERVE_ROMDATA 0x04 |
| 313 |
#define HI_RESET_FLAG_PRESERVE_NVRAM_STATE 0x08 |
| 314 |
#define HI_RESET_FLAG_PRESERVE_BOOT_INFO 0x10 |
| 315 |
#define HI_RESET_FLAG_WARM_RESET 0x20 |
| 316 |
|
| 317 |
/* define hi_fw_swap bits */ |
| 318 |
#define HI_DESC_IN_FW_BIT 0x01 |
| 319 |
|
| 320 |
/* indicate the reset flag is valid */ |
| 321 |
#define HI_RESET_FLAG_IS_VALID 0x12345678 |
| 322 |
|
| 323 |
/* ACS is enabled */ |
| 324 |
#define HI_ACS_FLAGS_ENABLED (1 << 0) |
| 325 |
/* Use physical WWAN device */ |
| 326 |
#define HI_ACS_FLAGS_USE_WWAN (1 << 1) |
| 327 |
/* Use test VAP */ |
| 328 |
#define HI_ACS_FLAGS_TEST_VAP (1 << 2) |
| 329 |
/* SDIO/mailbox ACS flag definitions */ |
| 330 |
#define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET (1 << 0) |
| 331 |
#define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET (1 << 1) |
| 332 |
#define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2) |
| 333 |
#define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK (1 << 16) |
| 334 |
#define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17) |
| 335 |
|
| 336 |
/* |
| 337 |
* If both SDIO_CRASH_DUMP_ENHANCEMENT_HOST and SDIO_CRASH_DUMP_ENHANCEMENT_FW |
| 338 |
* flags are set, then crashdump upload will be done using the BMI host/target |
| 339 |
* communication channel. |
| 340 |
*/ |
| 341 |
/* HOST to support using BMI dump FW memory when hit assert */ |
| 342 |
#define HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST 0x400 |
| 343 |
|
| 344 |
/* FW to support using BMI dump FW memory when hit assert */ |
| 345 |
#define HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW 0x800 |
| 346 |
|
| 347 |
/* |
| 348 |
* CONSOLE FLAGS |
| 349 |
* |
| 350 |
* Bit Range Meaning |
| 351 |
* --------- -------------------------------- |
| 352 |
* 2..0 UART ID (0 = Default) |
| 353 |
* 3 Baud Select (0 = 9600, 1 = 115200) |
| 354 |
* 30..4 Reserved |
| 355 |
* 31 Enable Console |
| 356 |
* |
| 357 |
*/ |
| 358 |
|
| 359 |
#define HI_CONSOLE_FLAGS_ENABLE (1 << 31) |
| 360 |
#define HI_CONSOLE_FLAGS_UART_MASK (0x7) |
| 361 |
#define HI_CONSOLE_FLAGS_UART_SHIFT 0 |
| 362 |
#define HI_CONSOLE_FLAGS_BAUD_SELECT (1 << 3) |
| 363 |
|
| 364 |
/* SM power save options */ |
| 365 |
#define HI_SMPS_ALLOW_MASK (0x00000001) |
| 366 |
#define HI_SMPS_MODE_MASK (0x00000002) |
| 367 |
#define HI_SMPS_MODE_STATIC (0x00000000) |
| 368 |
#define HI_SMPS_MODE_DYNAMIC (0x00000002) |
| 369 |
#define HI_SMPS_DISABLE_AUTO_MODE (0x00000004) |
| 370 |
#define HI_SMPS_DATA_THRESH_MASK (0x000007f8) |
| 371 |
#define HI_SMPS_DATA_THRESH_SHIFT (3) |
| 372 |
#define HI_SMPS_RSSI_THRESH_MASK (0x0007f800) |
| 373 |
#define HI_SMPS_RSSI_THRESH_SHIFT (11) |
| 374 |
#define HI_SMPS_LOWPWR_CM_MASK (0x00380000) |
| 375 |
#define HI_SMPS_LOWPWR_CM_SHIFT (15) |
| 376 |
#define HI_SMPS_HIPWR_CM_MASK (0x03c00000) |
| 377 |
#define HI_SMPS_HIPWR_CM_SHIFT (19) |
| 378 |
|
| 379 |
/* |
| 380 |
* WOW Extension configuration |
| 381 |
* |
| 382 |
* Bit Range Meaning |
| 383 |
* --------- -------------------------------- |
| 384 |
* 8..0 Size of each WOW pattern (max 511) |
| 385 |
* 15..9 Number of patterns per list (max 127) |
| 386 |
* 17..16 Number of lists (max 4) |
| 387 |
* 30..18 Reserved |
| 388 |
* 31 Enabled |
| 389 |
* |
| 390 |
* set values (except enable) to zeros for default settings |
| 391 |
*/ |
| 392 |
|
| 393 |
#define HI_WOW_EXT_ENABLED_MASK (1 << 31) |
| 394 |
#define HI_WOW_EXT_NUM_LIST_SHIFT 16 |
| 395 |
#define HI_WOW_EXT_NUM_LIST_MASK (0x3 << HI_WOW_EXT_NUM_LIST_SHIFT) |
| 396 |
#define HI_WOW_EXT_NUM_PATTERNS_SHIFT 9 |
| 397 |
#define HI_WOW_EXT_NUM_PATTERNS_MASK (0x7F << HI_WOW_EXT_NUM_PATTERNS_SHIFT) |
| 398 |
#define HI_WOW_EXT_PATTERN_SIZE_SHIFT 0 |
| 399 |
#define HI_WOW_EXT_PATTERN_SIZE_MASK (0x1FF << HI_WOW_EXT_PATTERN_SIZE_SHIFT) |
| 400 |
|
| 401 |
#define HI_WOW_EXT_MAKE_CONFIG(num_lists, count, size) \ |
| 402 |
((((num_lists) << HI_WOW_EXT_NUM_LIST_SHIFT) & \ |
| 403 |
HI_WOW_EXT_NUM_LIST_MASK) | \ |
| 404 |
(((count) << HI_WOW_EXT_NUM_PATTERNS_SHIFT) & \ |
| 405 |
HI_WOW_EXT_NUM_PATTERNS_MASK) | \ |
| 406 |
(((size) << HI_WOW_EXT_PATTERN_SIZE_SHIFT) & \ |
| 407 |
HI_WOW_EXT_PATTERN_SIZE_MASK)) |
| 408 |
|
| 409 |
#define HI_WOW_EXT_GET_NUM_LISTS(config) \ |
| 410 |
(((config) & HI_WOW_EXT_NUM_LIST_MASK) >> HI_WOW_EXT_NUM_LIST_SHIFT) |
| 411 |
#define HI_WOW_EXT_GET_NUM_PATTERNS(config) \ |
| 412 |
(((config) & HI_WOW_EXT_NUM_PATTERNS_MASK) >> \ |
| 413 |
HI_WOW_EXT_NUM_PATTERNS_SHIFT) |
| 414 |
#define HI_WOW_EXT_GET_PATTERN_SIZE(config) \ |
| 415 |
(((config) & HI_WOW_EXT_PATTERN_SIZE_MASK) >> \ |
| 416 |
HI_WOW_EXT_PATTERN_SIZE_SHIFT) |
| 417 |
|
| 418 |
/* |
| 419 |
* Early allocation configuration |
| 420 |
* Support RAM bank configuration before BMI done and this eases the memory |
| 421 |
* allocation at very early stage |
| 422 |
* Bit Range Meaning |
| 423 |
* --------- ---------------------------------- |
| 424 |
* [0:3] number of bank assigned to be IRAM |
| 425 |
* [4:15] reserved |
| 426 |
* [16:31] magic number |
| 427 |
* |
| 428 |
* Note: |
| 429 |
* 1. target firmware would check magic number and if it's a match, firmware |
| 430 |
* would consider the bits[0:15] are valid and base on that to calculate |
| 431 |
* the end of DRAM. Early allocation would be located at that area and |
| 432 |
* may be reclaimed when necessary |
| 433 |
* 2. if no magic number is found, early allocation would happen at "_end" |
| 434 |
* symbol of ROM which is located before the app-data and might NOT be |
| 435 |
* re-claimable. If this is adopted, link script should keep this in |
| 436 |
* mind to avoid data corruption. |
| 437 |
*/ |
| 438 |
#define HI_EARLY_ALLOC_MAGIC 0x6d8a |
| 439 |
#define HI_EARLY_ALLOC_MAGIC_MASK 0xffff0000 |
| 440 |
#define HI_EARLY_ALLOC_MAGIC_SHIFT 16 |
| 441 |
#define HI_EARLY_ALLOC_IRAM_BANKS_MASK 0x0000000f |
| 442 |
#define HI_EARLY_ALLOC_IRAM_BANKS_SHIFT 0 |
| 443 |
|
| 444 |
#define HI_EARLY_ALLOC_VALID() \ |
| 445 |
((((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_MAGIC_MASK) >> \ |
| 446 |
HI_EARLY_ALLOC_MAGIC_SHIFT) == (HI_EARLY_ALLOC_MAGIC)) |
| 447 |
#define HI_EARLY_ALLOC_GET_IRAM_BANKS() \ |
| 448 |
(((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_IRAM_BANKS_MASK) \ |
| 449 |
>> HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) |
| 450 |
|
| 451 |
/*power save flag bit definitions*/ |
| 452 |
#define HI_PWR_SAVE_LPL_ENABLED 0x1 |
| 453 |
/*b1-b3 reserved*/ |
| 454 |
/*b4-b5 : dev0 LPL type : 0 - none |
| 455 |
* 1- Reduce Pwr Search |
| 456 |
* 2- Reduce Pwr Listen |
| 457 |
*/ |
| 458 |
/*b6-b7 : dev1 LPL type and so on for Max 8 devices*/ |
| 459 |
#define HI_PWR_SAVE_LPL_DEV0_LSB 4 |
| 460 |
#define HI_PWR_SAVE_LPL_DEV_MASK 0x3 |
| 461 |
/*power save related utility macros*/ |
| 462 |
#define HI_LPL_ENABLED() \ |
| 463 |
((HOST_INTEREST->hi_pwr_save_flags & HI_PWR_SAVE_LPL_ENABLED)) |
| 464 |
#define HI_DEV_LPL_TYPE_GET(_devix) \ |
| 465 |
(HOST_INTEREST->hi_pwr_save_flags & ((HI_PWR_SAVE_LPL_DEV_MASK) << \ |
| 466 |
(HI_PWR_SAVE_LPL_DEV0_LSB + (_devix) * 2))) |
| 467 |
|
| 468 |
#define HOST_INTEREST_SMPS_IS_ALLOWED() \ |
| 469 |
((HOST_INTEREST->hi_smps_options & HI_SMPS_ALLOW_MASK)) |
| 470 |
|
| 471 |
/* Reserve 1024 bytes for extended board data */ |
| 472 |
#define QCA988X_BOARD_DATA_SZ 7168 |
| 473 |
#define QCA988X_BOARD_EXT_DATA_SZ 0 |
| 474 |
|
| 475 |
#define QCA9887_BOARD_DATA_SZ 7168 |
| 476 |
#define QCA9887_BOARD_EXT_DATA_SZ 0 |
| 477 |
|
| 478 |
#define QCA6174_BOARD_DATA_SZ 8192 |
| 479 |
#define QCA6174_BOARD_EXT_DATA_SZ 0 |
| 480 |
|
| 481 |
#define QCA9377_BOARD_DATA_SZ QCA6174_BOARD_DATA_SZ |
| 482 |
#define QCA9377_BOARD_EXT_DATA_SZ 0 |
| 483 |
|
| 484 |
#define QCA99X0_BOARD_DATA_SZ 12288 |
| 485 |
#define QCA99X0_BOARD_EXT_DATA_SZ 0 |
| 486 |
|
| 487 |
/* Dual band extended board data */ |
| 488 |
#define QCA99X0_EXT_BOARD_DATA_SZ 2048 |
| 489 |
#define EXT_BOARD_ADDRESS_OFFSET 0x3000 |
| 490 |
|
| 491 |
#define QCA4019_BOARD_DATA_SZ 12064 |
| 492 |
#define QCA4019_BOARD_EXT_DATA_SZ 0 |
| 493 |
|
| 494 |
#define WCN3990_BOARD_DATA_SZ 26328 |
| 495 |
#define WCN3990_BOARD_EXT_DATA_SZ 0 |
| 496 |
|
| 497 |
#endif /* __TARGADDRS_H__ */ |