| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* Copyright (C) 2007, 2011 Wolfgang Grandegger <[email protected]> |
| 3 |
* |
| 4 |
* Derived from the PCAN project file driver/src/pcan_pci.c: |
| 5 |
* |
| 6 |
* Copyright (C) 2001-2025 PEAK System-Technik GmbH |
| 7 |
* Author: Stéphane Grosjean <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/kernel.h> |
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/interrupt.h> |
| 13 |
#include <linux/netdevice.h> |
| 14 |
#include <linux/delay.h> |
| 15 |
#include <linux/pci.h> |
| 16 |
#include <linux/io.h> |
| 17 |
#include <linux/can.h> |
| 18 |
#include <linux/can/dev.h> |
| 19 |
|
| 20 |
#include "peak_canfd_user.h" |
| 21 |
|
| 22 |
MODULE_AUTHOR("Stéphane Grosjean <[email protected]>"); |
| 23 |
MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards"); |
| 24 |
MODULE_LICENSE("GPL v2"); |
| 25 |
|
| 26 |
#define PCIEFD_DRV_NAME "peak_pciefd" |
| 27 |
|
| 28 |
#define PEAK_PCI_VENDOR_ID 0x001c /* The PCI device and vendor IDs */ |
| 29 |
#define PEAK_PCIEFD_ID 0x0013 /* for PCIe slot cards */ |
| 30 |
#define PCAN_CPCIEFD_ID 0x0014 /* for Compact-PCI Serial slot cards */ |
| 31 |
#define PCAN_PCIE104FD_ID 0x0017 /* for PCIe-104 Express slot cards */ |
| 32 |
#define PCAN_MINIPCIEFD_ID 0x0018 /* for mini-PCIe slot cards */ |
| 33 |
#define PCAN_PCIEFD_OEM_ID 0x0019 /* for PCIe slot OEM cards */ |
| 34 |
#define PCAN_M2_ID 0x001a /* for M2 slot cards */ |
| 35 |
|
| 36 |
/* PEAK PCIe board access description */ |
| 37 |
#define PCIEFD_BAR0_SIZE (64 * 1024) |
| 38 |
#define PCIEFD_RX_DMA_SIZE (4 * 1024) |
| 39 |
#define PCIEFD_TX_DMA_SIZE (4 * 1024) |
| 40 |
|
| 41 |
#define PCIEFD_TX_PAGE_SIZE (2 * 1024) |
| 42 |
|
| 43 |
/* System Control Registers */ |
| 44 |
#define PCIEFD_REG_SYS_CTL_SET 0x0000 /* set bits */ |
| 45 |
#define PCIEFD_REG_SYS_CTL_CLR 0x0004 /* clear bits */ |
| 46 |
|
| 47 |
/* Version info registers */ |
| 48 |
#define PCIEFD_REG_SYS_VER1 0x0040 /* version reg #1 */ |
| 49 |
#define PCIEFD_REG_SYS_VER2 0x0044 /* version reg #2 */ |
| 50 |
|
| 51 |
#define PCIEFD_FW_VERSION(x, y, z) (((u32)(x) << 24) | \ |
| 52 |
((u32)(y) << 16) | \ |
| 53 |
((u32)(z) << 8)) |
| 54 |
|
| 55 |
/* System Control Registers Bits */ |
| 56 |
#define PCIEFD_SYS_CTL_TS_RST 0x00000001 /* timestamp clock */ |
| 57 |
#define PCIEFD_SYS_CTL_CLK_EN 0x00000002 /* system clock */ |
| 58 |
|
| 59 |
/* CAN-FD channel addresses */ |
| 60 |
#define PCIEFD_CANX_OFF(c) (((c) + 1) * 0x1000) |
| 61 |
|
| 62 |
#define PCIEFD_ECHO_SKB_MAX PCANFD_ECHO_SKB_DEF |
| 63 |
|
| 64 |
/* CAN-FD channel registers */ |
| 65 |
#define PCIEFD_REG_CAN_MISC 0x0000 /* Misc. control */ |
| 66 |
#define PCIEFD_REG_CAN_CLK_SEL 0x0008 /* Clock selector */ |
| 67 |
#define PCIEFD_REG_CAN_CMD_PORT_L 0x0010 /* 64-bits command port */ |
| 68 |
#define PCIEFD_REG_CAN_CMD_PORT_H 0x0014 |
| 69 |
#define PCIEFD_REG_CAN_TX_REQ_ACC 0x0020 /* Tx request accumulator */ |
| 70 |
#define PCIEFD_REG_CAN_TX_CTL_SET 0x0030 /* Tx control set register */ |
| 71 |
#define PCIEFD_REG_CAN_TX_CTL_CLR 0x0038 /* Tx control clear register */ |
| 72 |
#define PCIEFD_REG_CAN_TX_DMA_ADDR_L 0x0040 /* 64-bits addr for Tx DMA */ |
| 73 |
#define PCIEFD_REG_CAN_TX_DMA_ADDR_H 0x0044 |
| 74 |
#define PCIEFD_REG_CAN_RX_CTL_SET 0x0050 /* Rx control set register */ |
| 75 |
#define PCIEFD_REG_CAN_RX_CTL_CLR 0x0058 /* Rx control clear register */ |
| 76 |
#define PCIEFD_REG_CAN_RX_CTL_WRT 0x0060 /* Rx control write register */ |
| 77 |
#define PCIEFD_REG_CAN_RX_CTL_ACK 0x0068 /* Rx control ACK register */ |
| 78 |
#define PCIEFD_REG_CAN_RX_DMA_ADDR_L 0x0070 /* 64-bits addr for Rx DMA */ |
| 79 |
#define PCIEFD_REG_CAN_RX_DMA_ADDR_H 0x0074 |
| 80 |
|
| 81 |
/* CAN-FD channel misc register bits */ |
| 82 |
#define CANFD_MISC_TS_RST 0x00000001 /* timestamp cnt rst */ |
| 83 |
|
| 84 |
/* CAN-FD channel Clock SELector Source & DIVider */ |
| 85 |
#define CANFD_CLK_SEL_DIV_MASK 0x00000007 |
| 86 |
#define CANFD_CLK_SEL_DIV_60MHZ 0x00000000 /* SRC=240MHz only */ |
| 87 |
#define CANFD_CLK_SEL_DIV_40MHZ 0x00000001 /* SRC=240MHz only */ |
| 88 |
#define CANFD_CLK_SEL_DIV_30MHZ 0x00000002 /* SRC=240MHz only */ |
| 89 |
#define CANFD_CLK_SEL_DIV_24MHZ 0x00000003 /* SRC=240MHz only */ |
| 90 |
#define CANFD_CLK_SEL_DIV_20MHZ 0x00000004 /* SRC=240MHz only */ |
| 91 |
|
| 92 |
#define CANFD_CLK_SEL_SRC_MASK 0x00000008 /* 0=80MHz, 1=240MHz */ |
| 93 |
#define CANFD_CLK_SEL_SRC_240MHZ 0x00000008 |
| 94 |
#define CANFD_CLK_SEL_SRC_80MHZ (~CANFD_CLK_SEL_SRC_240MHZ & \ |
| 95 |
CANFD_CLK_SEL_SRC_MASK) |
| 96 |
|
| 97 |
#define CANFD_CLK_SEL_20MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| 98 |
CANFD_CLK_SEL_DIV_20MHZ) |
| 99 |
#define CANFD_CLK_SEL_24MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| 100 |
CANFD_CLK_SEL_DIV_24MHZ) |
| 101 |
#define CANFD_CLK_SEL_30MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| 102 |
CANFD_CLK_SEL_DIV_30MHZ) |
| 103 |
#define CANFD_CLK_SEL_40MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| 104 |
CANFD_CLK_SEL_DIV_40MHZ) |
| 105 |
#define CANFD_CLK_SEL_60MHZ (CANFD_CLK_SEL_SRC_240MHZ |\ |
| 106 |
CANFD_CLK_SEL_DIV_60MHZ) |
| 107 |
#define CANFD_CLK_SEL_80MHZ (CANFD_CLK_SEL_SRC_80MHZ) |
| 108 |
|
| 109 |
/* CAN-FD channel Rx/Tx control register bits */ |
| 110 |
#define CANFD_CTL_UNC_BIT 0x00010000 /* Uncached DMA mem */ |
| 111 |
#define CANFD_CTL_RST_BIT 0x00020000 /* reset DMA action */ |
| 112 |
#define CANFD_CTL_IEN_BIT 0x00040000 /* IRQ enable */ |
| 113 |
|
| 114 |
/* Rx IRQ Count and Time Limits */ |
| 115 |
#define CANFD_CTL_IRQ_CL_DEF 16 /* Rx msg max nb per IRQ in Rx DMA */ |
| 116 |
#define CANFD_CTL_IRQ_TL_DEF 10 /* Time before IRQ if < CL (x100 µs) */ |
| 117 |
|
| 118 |
/* Tx anticipation window (link logical address should be aligned on 2K |
| 119 |
* boundary) |
| 120 |
*/ |
| 121 |
#define PCIEFD_TX_PAGE_COUNT (PCIEFD_TX_DMA_SIZE / PCIEFD_TX_PAGE_SIZE) |
| 122 |
|
| 123 |
#define CANFD_MSG_LNK_TX 0x1001 /* Tx msgs link */ |
| 124 |
|
| 125 |
/* 32-bits IRQ status fields, heading Rx DMA area */ |
| 126 |
static inline int pciefd_irq_tag(u32 irq_status) |
| 127 |
{ |
| 128 |
return irq_status & 0x0000000f; |
| 129 |
} |
| 130 |
|
| 131 |
static inline int pciefd_irq_rx_cnt(u32 irq_status) |
| 132 |
{ |
| 133 |
return (irq_status & 0x000007f0) >> 4; |
| 134 |
} |
| 135 |
|
| 136 |
static inline int pciefd_irq_is_lnk(u32 irq_status) |
| 137 |
{ |
| 138 |
return irq_status & 0x00010000; |
| 139 |
} |
| 140 |
|
| 141 |
/* Rx record */ |
| 142 |
struct pciefd_rx_dma { |
| 143 |
__le32 irq_status; |
| 144 |
__le32 sys_time_low; |
| 145 |
__le32 sys_time_high; |
| 146 |
struct pucan_rx_msg msg[]; |
| 147 |
} __packed __aligned(4); |
| 148 |
|
| 149 |
/* Tx Link record */ |
| 150 |
struct pciefd_tx_link { |
| 151 |
__le16 size; |
| 152 |
__le16 type; |
| 153 |
__le32 laddr_lo; |
| 154 |
__le32 laddr_hi; |
| 155 |
} __packed __aligned(4); |
| 156 |
|
| 157 |
/* Tx page descriptor */ |
| 158 |
struct pciefd_page { |
| 159 |
void *vbase; /* page virtual address */ |
| 160 |
dma_addr_t lbase; /* page logical address */ |
| 161 |
u32 offset; |
| 162 |
u32 size; |
| 163 |
}; |
| 164 |
|
| 165 |
/* CAN-FD channel object */ |
| 166 |
struct pciefd_board; |
| 167 |
struct pciefd_can { |
| 168 |
struct peak_canfd_priv ucan; /* must be the first member */ |
| 169 |
void __iomem *reg_base; /* channel config base addr */ |
| 170 |
struct pciefd_board *board; /* reverse link */ |
| 171 |
|
| 172 |
struct pucan_command pucan_cmd; /* command buffer */ |
| 173 |
|
| 174 |
dma_addr_t rx_dma_laddr; /* DMA virtual and logical addr */ |
| 175 |
void *rx_dma_vaddr; /* for Rx and Tx areas */ |
| 176 |
dma_addr_t tx_dma_laddr; |
| 177 |
void *tx_dma_vaddr; |
| 178 |
|
| 179 |
struct pciefd_page tx_pages[PCIEFD_TX_PAGE_COUNT]; |
| 180 |
u16 tx_pages_free; /* free Tx pages counter */ |
| 181 |
u16 tx_page_index; /* current page used for Tx */ |
| 182 |
spinlock_t tx_lock; |
| 183 |
|
| 184 |
u32 irq_status; |
| 185 |
u32 irq_tag; /* next irq tag */ |
| 186 |
}; |
| 187 |
|
| 188 |
/* PEAK-PCIe FD board object */ |
| 189 |
struct pciefd_board { |
| 190 |
void __iomem *reg_base; |
| 191 |
struct pci_dev *pci_dev; |
| 192 |
int can_count; |
| 193 |
spinlock_t cmd_lock; /* 64-bits cmds must be atomic */ |
| 194 |
struct pciefd_can *can[]; /* array of network devices */ |
| 195 |
}; |
| 196 |
|
| 197 |
/* supported device ids. */ |
| 198 |
static const struct pci_device_id peak_pciefd_tbl[] = { |
| 199 |
{PEAK_PCI_VENDOR_ID, PEAK_PCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| 200 |
{PEAK_PCI_VENDOR_ID, PCAN_CPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| 201 |
{PEAK_PCI_VENDOR_ID, PCAN_PCIE104FD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| 202 |
{PEAK_PCI_VENDOR_ID, PCAN_MINIPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| 203 |
{PEAK_PCI_VENDOR_ID, PCAN_PCIEFD_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| 204 |
{PEAK_PCI_VENDOR_ID, PCAN_M2_ID, PCI_ANY_ID, PCI_ANY_ID,}, |
| 205 |
{0,} |
| 206 |
}; |
| 207 |
|
| 208 |
MODULE_DEVICE_TABLE(pci, peak_pciefd_tbl); |
| 209 |
|
| 210 |
/* read a 32 bits value from a SYS block register */ |
| 211 |
static inline u32 pciefd_sys_readreg(const struct pciefd_board *priv, u16 reg) |
| 212 |
{ |
| 213 |
return readl(priv->reg_base + reg); |
| 214 |
} |
| 215 |
|
| 216 |
/* write a 32 bits value into a SYS block register */ |
| 217 |
static inline void pciefd_sys_writereg(const struct pciefd_board *priv, |
| 218 |
u32 val, u16 reg) |
| 219 |
{ |
| 220 |
writel(val, priv->reg_base + reg); |
| 221 |
} |
| 222 |
|
| 223 |
/* read a 32 bits value from CAN-FD block register */ |
| 224 |
static inline u32 pciefd_can_readreg(const struct pciefd_can *priv, u16 reg) |
| 225 |
{ |
| 226 |
return readl(priv->reg_base + reg); |
| 227 |
} |
| 228 |
|
| 229 |
/* write a 32 bits value into a CAN-FD block register */ |
| 230 |
static inline void pciefd_can_writereg(const struct pciefd_can *priv, |
| 231 |
u32 val, u16 reg) |
| 232 |
{ |
| 233 |
writel(val, priv->reg_base + reg); |
| 234 |
} |
| 235 |
|
| 236 |
/* give a channel logical Rx DMA address to the board */ |
| 237 |
static void pciefd_can_setup_rx_dma(struct pciefd_can *priv) |
| 238 |
{ |
| 239 |
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| 240 |
const u32 dma_addr_h = (u32)(priv->rx_dma_laddr >> 32); |
| 241 |
#else |
| 242 |
const u32 dma_addr_h = 0; |
| 243 |
#endif |
| 244 |
|
| 245 |
/* (DMA must be reset for Rx) */ |
| 246 |
pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET); |
| 247 |
|
| 248 |
/* write the logical address of the Rx DMA area for this channel */ |
| 249 |
pciefd_can_writereg(priv, (u32)priv->rx_dma_laddr, |
| 250 |
PCIEFD_REG_CAN_RX_DMA_ADDR_L); |
| 251 |
pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_RX_DMA_ADDR_H); |
| 252 |
|
| 253 |
/* also indicates that Rx DMA is cacheable */ |
| 254 |
pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_RX_CTL_CLR); |
| 255 |
} |
| 256 |
|
| 257 |
/* clear channel logical Rx DMA address from the board */ |
| 258 |
static void pciefd_can_clear_rx_dma(struct pciefd_can *priv) |
| 259 |
{ |
| 260 |
/* DMA must be reset for Rx */ |
| 261 |
pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET); |
| 262 |
|
| 263 |
/* clear the logical address of the Rx DMA area for this channel */ |
| 264 |
pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_L); |
| 265 |
pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_H); |
| 266 |
} |
| 267 |
|
| 268 |
/* give a channel logical Tx DMA address to the board */ |
| 269 |
static void pciefd_can_setup_tx_dma(struct pciefd_can *priv) |
| 270 |
{ |
| 271 |
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| 272 |
const u32 dma_addr_h = (u32)(priv->tx_dma_laddr >> 32); |
| 273 |
#else |
| 274 |
const u32 dma_addr_h = 0; |
| 275 |
#endif |
| 276 |
|
| 277 |
/* (DMA must be reset for Tx) */ |
| 278 |
pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET); |
| 279 |
|
| 280 |
/* write the logical address of the Tx DMA area for this channel */ |
| 281 |
pciefd_can_writereg(priv, (u32)priv->tx_dma_laddr, |
| 282 |
PCIEFD_REG_CAN_TX_DMA_ADDR_L); |
| 283 |
pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_TX_DMA_ADDR_H); |
| 284 |
|
| 285 |
/* also indicates that Tx DMA is cacheable */ |
| 286 |
pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_TX_CTL_CLR); |
| 287 |
} |
| 288 |
|
| 289 |
/* clear channel logical Tx DMA address from the board */ |
| 290 |
static void pciefd_can_clear_tx_dma(struct pciefd_can *priv) |
| 291 |
{ |
| 292 |
/* DMA must be reset for Tx */ |
| 293 |
pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET); |
| 294 |
|
| 295 |
/* clear the logical address of the Tx DMA area for this channel */ |
| 296 |
pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_L); |
| 297 |
pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_H); |
| 298 |
} |
| 299 |
|
| 300 |
static void pciefd_can_ack_rx_dma(struct pciefd_can *priv) |
| 301 |
{ |
| 302 |
/* read value of current IRQ tag and inc it for next one */ |
| 303 |
priv->irq_tag = le32_to_cpu(*(__le32 *)priv->rx_dma_vaddr); |
| 304 |
priv->irq_tag++; |
| 305 |
priv->irq_tag &= 0xf; |
| 306 |
|
| 307 |
/* write the next IRQ tag for this CAN */ |
| 308 |
pciefd_can_writereg(priv, priv->irq_tag, PCIEFD_REG_CAN_RX_CTL_ACK); |
| 309 |
} |
| 310 |
|
| 311 |
/* IRQ handler */ |
| 312 |
static irqreturn_t pciefd_irq_handler(int irq, void *arg) |
| 313 |
{ |
| 314 |
struct pciefd_can *priv = arg; |
| 315 |
struct pciefd_rx_dma *rx_dma = priv->rx_dma_vaddr; |
| 316 |
|
| 317 |
/* INTA mode only to sync with PCIe transaction */ |
| 318 |
if (!pci_dev_msi_enabled(priv->board->pci_dev)) |
| 319 |
(void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1); |
| 320 |
|
| 321 |
/* read IRQ status from the first 32-bits of the Rx DMA area */ |
| 322 |
priv->irq_status = le32_to_cpu(rx_dma->irq_status); |
| 323 |
|
| 324 |
/* check if this (shared) IRQ is for this CAN */ |
| 325 |
if (pciefd_irq_tag(priv->irq_status) != priv->irq_tag) |
| 326 |
return IRQ_NONE; |
| 327 |
|
| 328 |
/* handle rx messages (if any) */ |
| 329 |
peak_canfd_handle_msgs_list(&priv->ucan, |
| 330 |
rx_dma->msg, |
| 331 |
pciefd_irq_rx_cnt(priv->irq_status)); |
| 332 |
|
| 333 |
/* handle tx link interrupt (if any) */ |
| 334 |
if (pciefd_irq_is_lnk(priv->irq_status)) { |
| 335 |
unsigned long flags; |
| 336 |
|
| 337 |
spin_lock_irqsave(&priv->tx_lock, flags); |
| 338 |
priv->tx_pages_free++; |
| 339 |
spin_unlock_irqrestore(&priv->tx_lock, flags); |
| 340 |
|
| 341 |
/* wake producer up (only if enough room in echo_skb array) */ |
| 342 |
spin_lock_irqsave(&priv->ucan.echo_lock, flags); |
| 343 |
if (!priv->ucan.can.echo_skb[priv->ucan.echo_idx]) |
| 344 |
netif_wake_queue(priv->ucan.ndev); |
| 345 |
|
| 346 |
spin_unlock_irqrestore(&priv->ucan.echo_lock, flags); |
| 347 |
} |
| 348 |
|
| 349 |
/* re-enable Rx DMA transfer for this CAN */ |
| 350 |
pciefd_can_ack_rx_dma(priv); |
| 351 |
|
| 352 |
return IRQ_HANDLED; |
| 353 |
} |
| 354 |
|
| 355 |
static int pciefd_enable_tx_path(struct peak_canfd_priv *ucan) |
| 356 |
{ |
| 357 |
struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| 358 |
int i; |
| 359 |
|
| 360 |
/* initialize the Tx pages descriptors */ |
| 361 |
priv->tx_pages_free = PCIEFD_TX_PAGE_COUNT - 1; |
| 362 |
priv->tx_page_index = 0; |
| 363 |
|
| 364 |
priv->tx_pages[0].vbase = priv->tx_dma_vaddr; |
| 365 |
priv->tx_pages[0].lbase = priv->tx_dma_laddr; |
| 366 |
|
| 367 |
for (i = 0; i < PCIEFD_TX_PAGE_COUNT; i++) { |
| 368 |
priv->tx_pages[i].offset = 0; |
| 369 |
priv->tx_pages[i].size = PCIEFD_TX_PAGE_SIZE - |
| 370 |
sizeof(struct pciefd_tx_link); |
| 371 |
if (i) { |
| 372 |
priv->tx_pages[i].vbase = |
| 373 |
priv->tx_pages[i - 1].vbase + |
| 374 |
PCIEFD_TX_PAGE_SIZE; |
| 375 |
priv->tx_pages[i].lbase = |
| 376 |
priv->tx_pages[i - 1].lbase + |
| 377 |
PCIEFD_TX_PAGE_SIZE; |
| 378 |
} |
| 379 |
} |
| 380 |
|
| 381 |
/* setup Tx DMA addresses into IP core */ |
| 382 |
pciefd_can_setup_tx_dma(priv); |
| 383 |
|
| 384 |
/* start (TX_RST=0) Tx Path */ |
| 385 |
pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_CLR); |
| 386 |
|
| 387 |
return 0; |
| 388 |
} |
| 389 |
|
| 390 |
/* board specific CANFD command pre-processing */ |
| 391 |
static int pciefd_pre_cmd(struct peak_canfd_priv *ucan) |
| 392 |
{ |
| 393 |
struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| 394 |
u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd); |
| 395 |
int err; |
| 396 |
|
| 397 |
/* pre-process command */ |
| 398 |
switch (cmd) { |
| 399 |
case PUCAN_CMD_NORMAL_MODE: |
| 400 |
case PUCAN_CMD_LISTEN_ONLY_MODE: |
| 401 |
|
| 402 |
if (ucan->can.state == CAN_STATE_BUS_OFF) |
| 403 |
break; |
| 404 |
|
| 405 |
/* going into operational mode: setup IRQ handler */ |
| 406 |
err = request_irq(priv->ucan.ndev->irq, |
| 407 |
pciefd_irq_handler, |
| 408 |
IRQF_SHARED, |
| 409 |
PCIEFD_DRV_NAME, |
| 410 |
priv); |
| 411 |
if (err) |
| 412 |
return err; |
| 413 |
|
| 414 |
/* setup Rx DMA address */ |
| 415 |
pciefd_can_setup_rx_dma(priv); |
| 416 |
|
| 417 |
/* setup max count of msgs per IRQ */ |
| 418 |
pciefd_can_writereg(priv, (CANFD_CTL_IRQ_TL_DEF) << 8 | |
| 419 |
CANFD_CTL_IRQ_CL_DEF, |
| 420 |
PCIEFD_REG_CAN_RX_CTL_WRT); |
| 421 |
|
| 422 |
/* clear DMA RST for Rx (Rx start) */ |
| 423 |
pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, |
| 424 |
PCIEFD_REG_CAN_RX_CTL_CLR); |
| 425 |
|
| 426 |
/* reset timestamps */ |
| 427 |
pciefd_can_writereg(priv, !CANFD_MISC_TS_RST, |
| 428 |
PCIEFD_REG_CAN_MISC); |
| 429 |
|
| 430 |
/* do an initial ACK */ |
| 431 |
pciefd_can_ack_rx_dma(priv); |
| 432 |
|
| 433 |
/* enable IRQ for this CAN after having set next irq_tag */ |
| 434 |
pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT, |
| 435 |
PCIEFD_REG_CAN_RX_CTL_SET); |
| 436 |
|
| 437 |
/* Tx path will be setup as soon as RX_BARRIER is received */ |
| 438 |
break; |
| 439 |
default: |
| 440 |
break; |
| 441 |
} |
| 442 |
|
| 443 |
return 0; |
| 444 |
} |
| 445 |
|
| 446 |
/* write a command */ |
| 447 |
static int pciefd_write_cmd(struct peak_canfd_priv *ucan) |
| 448 |
{ |
| 449 |
struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| 450 |
unsigned long flags; |
| 451 |
|
| 452 |
/* 64-bits command is atomic */ |
| 453 |
spin_lock_irqsave(&priv->board->cmd_lock, flags); |
| 454 |
|
| 455 |
pciefd_can_writereg(priv, *(u32 *)ucan->cmd_buffer, |
| 456 |
PCIEFD_REG_CAN_CMD_PORT_L); |
| 457 |
pciefd_can_writereg(priv, *(u32 *)(ucan->cmd_buffer + 4), |
| 458 |
PCIEFD_REG_CAN_CMD_PORT_H); |
| 459 |
|
| 460 |
spin_unlock_irqrestore(&priv->board->cmd_lock, flags); |
| 461 |
|
| 462 |
return 0; |
| 463 |
} |
| 464 |
|
| 465 |
/* board specific CANFD command post-processing */ |
| 466 |
static int pciefd_post_cmd(struct peak_canfd_priv *ucan) |
| 467 |
{ |
| 468 |
struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| 469 |
u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd); |
| 470 |
|
| 471 |
switch (cmd) { |
| 472 |
case PUCAN_CMD_RESET_MODE: |
| 473 |
|
| 474 |
if (ucan->can.state == CAN_STATE_STOPPED) |
| 475 |
break; |
| 476 |
|
| 477 |
/* controller now in reset mode: */ |
| 478 |
|
| 479 |
/* disable IRQ for this CAN */ |
| 480 |
pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT, |
| 481 |
PCIEFD_REG_CAN_RX_CTL_CLR); |
| 482 |
|
| 483 |
/* stop and reset DMA addresses in Tx/Rx engines */ |
| 484 |
pciefd_can_clear_tx_dma(priv); |
| 485 |
pciefd_can_clear_rx_dma(priv); |
| 486 |
|
| 487 |
/* wait for above commands to complete (read cycle) */ |
| 488 |
(void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1); |
| 489 |
|
| 490 |
free_irq(priv->ucan.ndev->irq, priv); |
| 491 |
|
| 492 |
ucan->can.state = CAN_STATE_STOPPED; |
| 493 |
|
| 494 |
break; |
| 495 |
} |
| 496 |
|
| 497 |
return 0; |
| 498 |
} |
| 499 |
|
| 500 |
static void *pciefd_alloc_tx_msg(struct peak_canfd_priv *ucan, u16 msg_size, |
| 501 |
int *room_left) |
| 502 |
{ |
| 503 |
struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| 504 |
struct pciefd_page *page = priv->tx_pages + priv->tx_page_index; |
| 505 |
unsigned long flags; |
| 506 |
void *msg; |
| 507 |
|
| 508 |
spin_lock_irqsave(&priv->tx_lock, flags); |
| 509 |
|
| 510 |
if (page->offset + msg_size > page->size) { |
| 511 |
struct pciefd_tx_link *lk; |
| 512 |
|
| 513 |
/* not enough space in this page: try another one */ |
| 514 |
if (!priv->tx_pages_free) { |
| 515 |
spin_unlock_irqrestore(&priv->tx_lock, flags); |
| 516 |
|
| 517 |
/* Tx overflow */ |
| 518 |
return NULL; |
| 519 |
} |
| 520 |
|
| 521 |
priv->tx_pages_free--; |
| 522 |
|
| 523 |
/* keep address of the very last free slot of current page */ |
| 524 |
lk = page->vbase + page->offset; |
| 525 |
|
| 526 |
/* next, move on a new free page */ |
| 527 |
priv->tx_page_index = (priv->tx_page_index + 1) % |
| 528 |
PCIEFD_TX_PAGE_COUNT; |
| 529 |
page = priv->tx_pages + priv->tx_page_index; |
| 530 |
|
| 531 |
/* put link record to this new page at the end of prev one */ |
| 532 |
lk->size = cpu_to_le16(sizeof(*lk)); |
| 533 |
lk->type = cpu_to_le16(CANFD_MSG_LNK_TX); |
| 534 |
lk->laddr_lo = cpu_to_le32(page->lbase); |
| 535 |
|
| 536 |
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| 537 |
lk->laddr_hi = cpu_to_le32(page->lbase >> 32); |
| 538 |
#else |
| 539 |
lk->laddr_hi = 0; |
| 540 |
#endif |
| 541 |
/* next msgs will be put from the begininng of this new page */ |
| 542 |
page->offset = 0; |
| 543 |
} |
| 544 |
|
| 545 |
*room_left = priv->tx_pages_free * page->size; |
| 546 |
|
| 547 |
spin_unlock_irqrestore(&priv->tx_lock, flags); |
| 548 |
|
| 549 |
msg = page->vbase + page->offset; |
| 550 |
|
| 551 |
/* give back room left in the tx ring */ |
| 552 |
*room_left += page->size - (page->offset + msg_size); |
| 553 |
|
| 554 |
return msg; |
| 555 |
} |
| 556 |
|
| 557 |
static int pciefd_write_tx_msg(struct peak_canfd_priv *ucan, |
| 558 |
struct pucan_tx_msg *msg) |
| 559 |
{ |
| 560 |
struct pciefd_can *priv = (struct pciefd_can *)ucan; |
| 561 |
struct pciefd_page *page = priv->tx_pages + priv->tx_page_index; |
| 562 |
|
| 563 |
/* this slot is now reserved for writing the frame */ |
| 564 |
page->offset += le16_to_cpu(msg->size); |
| 565 |
|
| 566 |
/* tell the board a frame has been written in Tx DMA area */ |
| 567 |
pciefd_can_writereg(priv, 1, PCIEFD_REG_CAN_TX_REQ_ACC); |
| 568 |
|
| 569 |
return 0; |
| 570 |
} |
| 571 |
|
| 572 |
/* probe for CAN-FD channel #pciefd_board->can_count */ |
| 573 |
static int pciefd_can_probe(struct pciefd_board *pciefd) |
| 574 |
{ |
| 575 |
struct net_device *ndev; |
| 576 |
struct pciefd_can *priv; |
| 577 |
u32 clk; |
| 578 |
int err; |
| 579 |
|
| 580 |
/* allocate the candev object with default isize of echo skbs ring */ |
| 581 |
ndev = alloc_peak_canfd_dev(sizeof(*priv), pciefd->can_count, |
| 582 |
PCIEFD_ECHO_SKB_MAX); |
| 583 |
if (!ndev) { |
| 584 |
dev_err(&pciefd->pci_dev->dev, |
| 585 |
"failed to alloc candev object\n"); |
| 586 |
goto failure; |
| 587 |
} |
| 588 |
|
| 589 |
priv = netdev_priv(ndev); |
| 590 |
|
| 591 |
/* fill-in candev private object: */ |
| 592 |
|
| 593 |
/* setup PCIe-FD own callbacks */ |
| 594 |
priv->ucan.pre_cmd = pciefd_pre_cmd; |
| 595 |
priv->ucan.write_cmd = pciefd_write_cmd; |
| 596 |
priv->ucan.post_cmd = pciefd_post_cmd; |
| 597 |
priv->ucan.enable_tx_path = pciefd_enable_tx_path; |
| 598 |
priv->ucan.alloc_tx_msg = pciefd_alloc_tx_msg; |
| 599 |
priv->ucan.write_tx_msg = pciefd_write_tx_msg; |
| 600 |
|
| 601 |
/* setup PCIe-FD own command buffer */ |
| 602 |
priv->ucan.cmd_buffer = &priv->pucan_cmd; |
| 603 |
priv->ucan.cmd_maxlen = sizeof(priv->pucan_cmd); |
| 604 |
|
| 605 |
priv->board = pciefd; |
| 606 |
|
| 607 |
/* CAN config regs block address */ |
| 608 |
priv->reg_base = pciefd->reg_base + PCIEFD_CANX_OFF(priv->ucan.index); |
| 609 |
|
| 610 |
/* allocate non-cacheable DMA'able 4KB memory area for Rx */ |
| 611 |
priv->rx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev, |
| 612 |
PCIEFD_RX_DMA_SIZE, |
| 613 |
&priv->rx_dma_laddr, |
| 614 |
GFP_KERNEL); |
| 615 |
if (!priv->rx_dma_vaddr) { |
| 616 |
dev_err(&pciefd->pci_dev->dev, |
| 617 |
"Rx dmam_alloc_coherent(%u) failure\n", |
| 618 |
PCIEFD_RX_DMA_SIZE); |
| 619 |
goto err_free_candev; |
| 620 |
} |
| 621 |
|
| 622 |
/* allocate non-cacheable DMA'able 4KB memory area for Tx */ |
| 623 |
priv->tx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev, |
| 624 |
PCIEFD_TX_DMA_SIZE, |
| 625 |
&priv->tx_dma_laddr, |
| 626 |
GFP_KERNEL); |
| 627 |
if (!priv->tx_dma_vaddr) { |
| 628 |
dev_err(&pciefd->pci_dev->dev, |
| 629 |
"Tx dmam_alloc_coherent(%u) failure\n", |
| 630 |
PCIEFD_TX_DMA_SIZE); |
| 631 |
goto err_free_candev; |
| 632 |
} |
| 633 |
|
| 634 |
/* CAN clock in RST mode */ |
| 635 |
pciefd_can_writereg(priv, CANFD_MISC_TS_RST, PCIEFD_REG_CAN_MISC); |
| 636 |
|
| 637 |
/* read current clock value */ |
| 638 |
clk = pciefd_can_readreg(priv, PCIEFD_REG_CAN_CLK_SEL); |
| 639 |
switch (clk) { |
| 640 |
case CANFD_CLK_SEL_20MHZ: |
| 641 |
priv->ucan.can.clock.freq = 20 * 1000 * 1000; |
| 642 |
break; |
| 643 |
case CANFD_CLK_SEL_24MHZ: |
| 644 |
priv->ucan.can.clock.freq = 24 * 1000 * 1000; |
| 645 |
break; |
| 646 |
case CANFD_CLK_SEL_30MHZ: |
| 647 |
priv->ucan.can.clock.freq = 30 * 1000 * 1000; |
| 648 |
break; |
| 649 |
case CANFD_CLK_SEL_40MHZ: |
| 650 |
priv->ucan.can.clock.freq = 40 * 1000 * 1000; |
| 651 |
break; |
| 652 |
case CANFD_CLK_SEL_60MHZ: |
| 653 |
priv->ucan.can.clock.freq = 60 * 1000 * 1000; |
| 654 |
break; |
| 655 |
default: |
| 656 |
pciefd_can_writereg(priv, CANFD_CLK_SEL_80MHZ, |
| 657 |
PCIEFD_REG_CAN_CLK_SEL); |
| 658 |
|
| 659 |
fallthrough; |
| 660 |
case CANFD_CLK_SEL_80MHZ: |
| 661 |
priv->ucan.can.clock.freq = 80 * 1000 * 1000; |
| 662 |
break; |
| 663 |
} |
| 664 |
|
| 665 |
ndev->irq = pciefd->pci_dev->irq; |
| 666 |
|
| 667 |
SET_NETDEV_DEV(ndev, &pciefd->pci_dev->dev); |
| 668 |
|
| 669 |
err = register_candev(ndev); |
| 670 |
if (err) { |
| 671 |
dev_err(&pciefd->pci_dev->dev, |
| 672 |
"couldn't register CAN device: %d\n", err); |
| 673 |
goto err_free_candev; |
| 674 |
} |
| 675 |
|
| 676 |
spin_lock_init(&priv->tx_lock); |
| 677 |
|
| 678 |
/* save the object address in the board structure */ |
| 679 |
pciefd->can[pciefd->can_count] = priv; |
| 680 |
|
| 681 |
dev_info(&pciefd->pci_dev->dev, "%s at reg_base=0x%p irq=%d\n", |
| 682 |
ndev->name, priv->reg_base, ndev->irq); |
| 683 |
|
| 684 |
return 0; |
| 685 |
|
| 686 |
err_free_candev: |
| 687 |
free_candev(ndev); |
| 688 |
|
| 689 |
failure: |
| 690 |
return -ENOMEM; |
| 691 |
} |
| 692 |
|
| 693 |
/* remove a CAN-FD channel by releasing all of its resources */ |
| 694 |
static void pciefd_can_remove(struct pciefd_can *priv) |
| 695 |
{ |
| 696 |
/* unregister (close) the can device to go back to RST mode first */ |
| 697 |
unregister_candev(priv->ucan.ndev); |
| 698 |
|
| 699 |
/* finally, free the candev object */ |
| 700 |
free_candev(priv->ucan.ndev); |
| 701 |
} |
| 702 |
|
| 703 |
/* remove all CAN-FD channels by releasing their own resources */ |
| 704 |
static void pciefd_can_remove_all(struct pciefd_board *pciefd) |
| 705 |
{ |
| 706 |
while (pciefd->can_count > 0) |
| 707 |
pciefd_can_remove(pciefd->can[--pciefd->can_count]); |
| 708 |
} |
| 709 |
|
| 710 |
/* probe for the entire device */ |
| 711 |
static int peak_pciefd_probe(struct pci_dev *pdev, |
| 712 |
const struct pci_device_id *ent) |
| 713 |
{ |
| 714 |
struct pciefd_board *pciefd; |
| 715 |
int err, can_count; |
| 716 |
u16 sub_sys_id; |
| 717 |
u8 hw_ver_major; |
| 718 |
u8 hw_ver_minor; |
| 719 |
u8 hw_ver_sub; |
| 720 |
u32 v2; |
| 721 |
|
| 722 |
err = pci_enable_device(pdev); |
| 723 |
if (err) |
| 724 |
return err; |
| 725 |
err = pci_request_regions(pdev, PCIEFD_DRV_NAME); |
| 726 |
if (err) |
| 727 |
goto err_disable_pci; |
| 728 |
|
| 729 |
/* the number of channels depends on sub-system id */ |
| 730 |
err = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sub_sys_id); |
| 731 |
if (err) |
| 732 |
goto err_release_regions; |
| 733 |
|
| 734 |
dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n", |
| 735 |
pdev->vendor, pdev->device, sub_sys_id); |
| 736 |
|
| 737 |
if (sub_sys_id >= 0x0012) |
| 738 |
can_count = 4; |
| 739 |
else if (sub_sys_id >= 0x0010) |
| 740 |
can_count = 3; |
| 741 |
else if (sub_sys_id >= 0x0004) |
| 742 |
can_count = 2; |
| 743 |
else |
| 744 |
can_count = 1; |
| 745 |
|
| 746 |
/* allocate board structure object */ |
| 747 |
pciefd = devm_kzalloc(&pdev->dev, struct_size(pciefd, can, can_count), |
| 748 |
GFP_KERNEL); |
| 749 |
if (!pciefd) { |
| 750 |
err = -ENOMEM; |
| 751 |
goto err_release_regions; |
| 752 |
} |
| 753 |
|
| 754 |
/* initialize the board structure */ |
| 755 |
pciefd->pci_dev = pdev; |
| 756 |
spin_lock_init(&pciefd->cmd_lock); |
| 757 |
|
| 758 |
/* save the PCI BAR0 virtual address for further system regs access */ |
| 759 |
pciefd->reg_base = pci_iomap(pdev, 0, PCIEFD_BAR0_SIZE); |
| 760 |
if (!pciefd->reg_base) { |
| 761 |
dev_err(&pdev->dev, "failed to map PCI resource #0\n"); |
| 762 |
err = -ENOMEM; |
| 763 |
goto err_release_regions; |
| 764 |
} |
| 765 |
|
| 766 |
/* read the firmware version number */ |
| 767 |
v2 = pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER2); |
| 768 |
|
| 769 |
hw_ver_major = (v2 & 0x0000f000) >> 12; |
| 770 |
hw_ver_minor = (v2 & 0x00000f00) >> 8; |
| 771 |
hw_ver_sub = (v2 & 0x000000f0) >> 4; |
| 772 |
|
| 773 |
dev_info(&pdev->dev, |
| 774 |
"%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count, |
| 775 |
hw_ver_major, hw_ver_minor, hw_ver_sub); |
| 776 |
|
| 777 |
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT |
| 778 |
/* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and |
| 779 |
* 64-bit logical addresses: this workaround forces usage of 32-bit |
| 780 |
* DMA addresses only when such a fw is detected. |
| 781 |
*/ |
| 782 |
if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) < |
| 783 |
PCIEFD_FW_VERSION(3, 3, 0)) { |
| 784 |
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| 785 |
if (err) |
| 786 |
dev_warn(&pdev->dev, |
| 787 |
"warning: can't set DMA mask %llxh (err %d)\n", |
| 788 |
DMA_BIT_MASK(32), err); |
| 789 |
} |
| 790 |
#endif |
| 791 |
|
| 792 |
/* stop system clock */ |
| 793 |
pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN, |
| 794 |
PCIEFD_REG_SYS_CTL_CLR); |
| 795 |
|
| 796 |
pci_set_master(pdev); |
| 797 |
|
| 798 |
/* create now the corresponding channels objects */ |
| 799 |
while (pciefd->can_count < can_count) { |
| 800 |
err = pciefd_can_probe(pciefd); |
| 801 |
if (err) |
| 802 |
goto err_free_canfd; |
| 803 |
|
| 804 |
pciefd->can_count++; |
| 805 |
} |
| 806 |
|
| 807 |
/* set system timestamps counter in RST mode */ |
| 808 |
pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST, |
| 809 |
PCIEFD_REG_SYS_CTL_SET); |
| 810 |
|
| 811 |
/* wait a bit (read cycle) */ |
| 812 |
(void)pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER1); |
| 813 |
|
| 814 |
/* free all clocks */ |
| 815 |
pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST, |
| 816 |
PCIEFD_REG_SYS_CTL_CLR); |
| 817 |
|
| 818 |
/* start system clock */ |
| 819 |
pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN, |
| 820 |
PCIEFD_REG_SYS_CTL_SET); |
| 821 |
|
| 822 |
/* remember the board structure address in the device user data */ |
| 823 |
pci_set_drvdata(pdev, pciefd); |
| 824 |
|
| 825 |
return 0; |
| 826 |
|
| 827 |
err_free_canfd: |
| 828 |
pciefd_can_remove_all(pciefd); |
| 829 |
|
| 830 |
pci_iounmap(pdev, pciefd->reg_base); |
| 831 |
|
| 832 |
err_release_regions: |
| 833 |
pci_release_regions(pdev); |
| 834 |
|
| 835 |
err_disable_pci: |
| 836 |
pci_disable_device(pdev); |
| 837 |
|
| 838 |
/* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while |
| 839 |
* the probe() function must return a negative errno in case of failure |
| 840 |
* (err is unchanged if negative) |
| 841 |
*/ |
| 842 |
return pcibios_err_to_errno(err); |
| 843 |
} |
| 844 |
|
| 845 |
/* free the board structure object, as well as its resources: */ |
| 846 |
static void peak_pciefd_remove(struct pci_dev *pdev) |
| 847 |
{ |
| 848 |
struct pciefd_board *pciefd = pci_get_drvdata(pdev); |
| 849 |
|
| 850 |
/* release CAN-FD channels resources */ |
| 851 |
pciefd_can_remove_all(pciefd); |
| 852 |
|
| 853 |
pci_iounmap(pdev, pciefd->reg_base); |
| 854 |
|
| 855 |
pci_release_regions(pdev); |
| 856 |
pci_disable_device(pdev); |
| 857 |
} |
| 858 |
|
| 859 |
static struct pci_driver peak_pciefd_driver = { |
| 860 |
.name = PCIEFD_DRV_NAME, |
| 861 |
.id_table = peak_pciefd_tbl, |
| 862 |
.probe = peak_pciefd_probe, |
| 863 |
.remove = peak_pciefd_remove, |
| 864 |
}; |
| 865 |
|
| 866 |
module_pci_driver(peak_pciefd_driver); |