Debian Codegraph @

arch/arm/boot/dts/nxp/vf/vfxxx.dtsi

raw
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
2 //
3 // Copyright 2013 Freescale Semiconductor, Inc.
4
5 #include "vf610-pinfunc.h"
6 #include <dt-bindings/clock/vf610-clock.h>
7 #include <dt-bindings/interrupt-controller/irq.h>
8 #include <dt-bindings/gpio/gpio.h>
9
10 / {
11 aliases {
12 can0 = &can0;
13 can1 = &can1;
14 ethernet0 = &fec0;
15 ethernet1 = &fec1;
16 serial0 = &uart0;
17 serial1 = &uart1;
18 serial2 = &uart2;
19 serial3 = &uart3;
20 serial4 = &uart4;
21 serial5 = &uart5;
22 gpio0 = &gpio0;
23 gpio1 = &gpio1;
24 gpio2 = &gpio2;
25 gpio3 = &gpio3;
26 gpio4 = &gpio4;
27 usbphy0 = &usbphy0;
28 usbphy1 = &usbphy1;
29 };
30
31 fxosc: fxosc {
32 compatible = "fixed-clock";
33 #clock-cells = <0>;
34 clock-frequency = <24000000>;
35 };
36
37 sxosc: sxosc {
38 compatible = "fixed-clock";
39 #clock-cells = <0>;
40 clock-frequency = <32768>;
41 };
42
43 reboot: syscon-reboot {
44 compatible = "syscon-reboot";
45 regmap = <&src>;
46 offset = <0x0>;
47 mask = <0x1000>;
48 };
49
50 tempsensor: iio-hwmon {
51 compatible = "iio-hwmon";
52 io-channels = <&adc0 16>, <&adc1 16>;
53 };
54
55 soc {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 compatible = "simple-bus";
59 interrupt-parent = <&mscm_ir>;
60 ranges;
61
62 aips0: bus@40000000 {
63 compatible = "fsl,aips-bus", "simple-bus";
64 #address-cells = <1>;
65 #size-cells = <1>;
66 reg = <0x40000000 0x00070000>;
67 ranges;
68
69 mscm_cpucfg: cpucfg@40001000 {
70 compatible = "fsl,vf610-mscm-cpucfg", "syscon";
71 reg = <0x40001000 0x800>;
72 };
73
74 mscm_ir: interrupt-controller@40001800 {
75 compatible = "fsl,vf610-mscm-ir";
76 reg = <0x40001800 0x400>;
77 fsl,cpucfg = <&mscm_cpucfg>;
78 interrupt-controller;
79 #interrupt-cells = <2>;
80 };
81
82 edma0: dma-controller@40018000 {
83 #dma-cells = <2>;
84 compatible = "fsl,vf610-edma";
85 reg = <0x40018000 0x2000>,
86 <0x40024000 0x1000>,
87 <0x40025000 0x1000>;
88 dma-channels = <32>;
89 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
90 <9 IRQ_TYPE_LEVEL_HIGH>;
91 interrupt-names = "edma-tx", "edma-err";
92 clock-names = "dmamux0", "dmamux1";
93 clocks = <&clks VF610_CLK_DMAMUX0>,
94 <&clks VF610_CLK_DMAMUX1>;
95 status = "disabled";
96 };
97
98 can0: can@40020000 {
99 compatible = "fsl,vf610-flexcan";
100 reg = <0x40020000 0x4000>;
101 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
102 clocks = <&clks VF610_CLK_FLEXCAN0>,
103 <&clks VF610_CLK_FLEXCAN0>;
104 clock-names = "ipg", "per";
105 status = "disabled";
106 };
107
108 uart0: serial@40027000 {
109 compatible = "fsl,vf610-lpuart";
110 reg = <0x40027000 0x1000>;
111 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
112 clocks = <&clks VF610_CLK_UART0>;
113 clock-names = "ipg";
114 dmas = <&edma0 0 2>, <&edma0 0 3>;
115 dma-names = "rx","tx";
116 status = "disabled";
117 };
118
119 uart1: serial@40028000 {
120 compatible = "fsl,vf610-lpuart";
121 reg = <0x40028000 0x1000>;
122 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
123 clocks = <&clks VF610_CLK_UART1>;
124 clock-names = "ipg";
125 dmas = <&edma0 0 4>, <&edma0 0 5>;
126 dma-names = "rx","tx";
127 status = "disabled";
128 };
129
130 uart2: serial@40029000 {
131 compatible = "fsl,vf610-lpuart";
132 reg = <0x40029000 0x1000>;
133 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
134 clocks = <&clks VF610_CLK_UART2>;
135 clock-names = "ipg";
136 dmas = <&edma0 0 6>, <&edma0 0 7>;
137 dma-names = "rx","tx";
138 status = "disabled";
139 };
140
141 uart3: serial@4002a000 {
142 compatible = "fsl,vf610-lpuart";
143 reg = <0x4002a000 0x1000>;
144 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
145 clocks = <&clks VF610_CLK_UART3>;
146 clock-names = "ipg";
147 dmas = <&edma0 0 8>, <&edma0 0 9>;
148 dma-names = "rx","tx";
149 status = "disabled";
150 };
151
152 dspi0: spi@4002c000 {
153 #address-cells = <1>;
154 #size-cells = <0>;
155 compatible = "fsl,vf610-dspi";
156 reg = <0x4002c000 0x1000>;
157 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
158 clocks = <&clks VF610_CLK_DSPI0>;
159 clock-names = "dspi";
160 spi-num-chipselects = <6>;
161 dmas = <&edma1 1 13>, <&edma1 1 12>;
162 dma-names = "tx", "rx";
163 status = "disabled";
164 };
165
166 dspi1: spi@4002d000 {
167 #address-cells = <1>;
168 #size-cells = <0>;
169 compatible = "fsl,vf610-dspi";
170 reg = <0x4002d000 0x1000>;
171 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
172 clocks = <&clks VF610_CLK_DSPI1>;
173 clock-names = "dspi";
174 spi-num-chipselects = <4>;
175 dmas = <&edma1 1 15>, <&edma1 1 14>;
176 dma-names = "tx", "rx";
177 status = "disabled";
178 };
179
180 sai0: sai@4002f000 {
181 compatible = "fsl,vf610-sai";
182 reg = <0x4002f000 0x1000>;
183 interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
184 clocks = <&clks VF610_CLK_SAI0>,
185 <&clks VF610_CLK_SAI0_DIV>,
186 <&clks 0>, <&clks 0>;
187 clock-names = "bus", "mclk1", "mclk2", "mclk3";
188 dma-names = "rx", "tx";
189 dmas = <&edma0 0 16>, <&edma0 0 17>;
190 status = "disabled";
191 };
192
193 sai1: sai@40030000 {
194 compatible = "fsl,vf610-sai";
195 reg = <0x40030000 0x1000>;
196 interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
197 clocks = <&clks VF610_CLK_SAI1>,
198 <&clks VF610_CLK_SAI1_DIV>,
199 <&clks 0>, <&clks 0>;
200 clock-names = "bus", "mclk1", "mclk2", "mclk3";
201 dma-names = "rx", "tx";
202 dmas = <&edma0 0 18>, <&edma0 0 19>;
203 status = "disabled";
204 };
205
206 sai2: sai@40031000 {
207 compatible = "fsl,vf610-sai";
208 reg = <0x40031000 0x1000>;
209 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
210 clocks = <&clks VF610_CLK_SAI2>,
211 <&clks VF610_CLK_SAI2_DIV>,
212 <&clks 0>, <&clks 0>;
213 clock-names = "bus", "mclk1", "mclk2", "mclk3";
214 dma-names = "rx", "tx";
215 dmas = <&edma0 0 20>, <&edma0 0 21>;
216 status = "disabled";
217 };
218
219 sai3: sai@40032000 {
220 compatible = "fsl,vf610-sai";
221 reg = <0x40032000 0x1000>;
222 interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
223 clocks = <&clks VF610_CLK_SAI3>,
224 <&clks VF610_CLK_SAI3_DIV>,
225 <&clks 0>, <&clks 0>;
226 clock-names = "bus", "mclk1", "mclk2", "mclk3";
227 dma-names = "rx", "tx";
228 dmas = <&edma0 1 8>, <&edma0 1 9>;
229 status = "disabled";
230 };
231
232 pit: pit@40037000 {
233 compatible = "fsl,vf610-pit";
234 reg = <0x40037000 0x1000>;
235 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
236 clocks = <&clks VF610_CLK_PIT>;
237 clock-names = "pit";
238 };
239
240 pwm0: pwm@40038000 {
241 compatible = "fsl,vf610-ftm-pwm";
242 #pwm-cells = <3>;
243 reg = <0x40038000 0x1000>;
244 clock-names = "ftm_sys", "ftm_ext",
245 "ftm_fix", "ftm_cnt_clk_en";
246 clocks = <&clks VF610_CLK_FTM0>,
247 <&clks VF610_CLK_FTM0_EXT_SEL>,
248 <&clks VF610_CLK_FTM0_FIX_SEL>,
249 <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
250 status = "disabled";
251 };
252
253 pwm1: pwm@40039000 {
254 compatible = "fsl,vf610-ftm-pwm";
255 #pwm-cells = <3>;
256 reg = <0x40039000 0x1000>;
257 clock-names = "ftm_sys", "ftm_ext",
258 "ftm_fix", "ftm_cnt_clk_en";
259 clocks = <&clks VF610_CLK_FTM1>,
260 <&clks VF610_CLK_FTM1_EXT_SEL>,
261 <&clks VF610_CLK_FTM1_FIX_SEL>,
262 <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
263 status = "disabled";
264 };
265
266 adc0: adc@4003b000 {
267 compatible = "fsl,vf610-adc";
268 reg = <0x4003b000 0x1000>;
269 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
270 clocks = <&clks VF610_CLK_ADC0>;
271 clock-names = "adc";
272 #io-channel-cells = <1>;
273 status = "disabled";
274 fsl,adck-max-frequency = <30000000>, <40000000>,
275 <20000000>;
276 };
277
278 tcon0: timing-controller@4003d000 {
279 compatible = "fsl,vf610-tcon";
280 reg = <0x4003d000 0x1000>;
281 clocks = <&clks VF610_CLK_TCON0>;
282 clock-names = "ipg";
283 status = "disabled";
284 };
285
286 wdoga5: watchdog@4003e000 {
287 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
288 reg = <0x4003e000 0x1000>;
289 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
290 clocks = <&clks VF610_CLK_WDT>;
291 status = "disabled";
292 };
293
294 qspi0: spi@40044000 {
295 #address-cells = <1>;
296 #size-cells = <0>;
297 compatible = "fsl,vf610-qspi";
298 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
299 reg-names = "QuadSPI", "QuadSPI-memory";
300 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
301 clocks = <&clks VF610_CLK_QSPI0_EN>,
302 <&clks VF610_CLK_QSPI0>;
303 clock-names = "qspi_en", "qspi";
304 status = "disabled";
305 };
306
307 iomuxc: pinctrl@40048000 {
308 compatible = "fsl,vf610-iomuxc";
309 reg = <0x40048000 0x1000>;
310 };
311
312 gpio0: gpio@40049000 {
313 compatible = "fsl,vf610-gpio";
314 reg = <0x40049000 0x1000 0x400ff000 0x40>;
315 gpio-controller;
316 #gpio-cells = <2>;
317 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
318 interrupt-controller;
319 #interrupt-cells = <2>;
320 gpio-ranges = <&iomuxc 0 0 32>;
321 ngpios = <32>;
322 };
323
324 gpio1: gpio@4004a000 {
325 compatible = "fsl,vf610-gpio";
326 reg = <0x4004a000 0x1000 0x400ff040 0x40>;
327 gpio-controller;
328 #gpio-cells = <2>;
329 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
330 interrupt-controller;
331 #interrupt-cells = <2>;
332 gpio-ranges = <&iomuxc 0 32 32>;
333 ngpios = <32>;
334 };
335
336 gpio2: gpio@4004b000 {
337 compatible = "fsl,vf610-gpio";
338 reg = <0x4004b000 0x1000 0x400ff080 0x40>;
339 gpio-controller;
340 #gpio-cells = <2>;
341 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
342 interrupt-controller;
343 #interrupt-cells = <2>;
344 gpio-ranges = <&iomuxc 0 64 32>;
345 ngpios = <32>;
346 };
347
348 gpio3: gpio@4004c000 {
349 compatible = "fsl,vf610-gpio";
350 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
351 gpio-controller;
352 #gpio-cells = <2>;
353 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
354 interrupt-controller;
355 #interrupt-cells = <2>;
356 gpio-ranges = <&iomuxc 0 96 32>;
357 ngpios = <32>;
358 };
359
360 gpio4: gpio@4004d000 {
361 compatible = "fsl,vf610-gpio";
362 reg = <0x4004d000 0x1000 0x400ff100 0x40>;
363 gpio-controller;
364 #gpio-cells = <2>;
365 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
366 interrupt-controller;
367 #interrupt-cells = <2>;
368 gpio-ranges = <&iomuxc 0 128 7>;
369 ngpios = <7>;
370 };
371
372 anatop: anatop@40050000 {
373 compatible = "fsl,vf610-anatop", "syscon";
374 reg = <0x40050000 0x400>;
375 };
376
377 usbphy0: usbphy@40050800 {
378 compatible = "fsl,vf610-usbphy";
379 reg = <0x40050800 0x400>;
380 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
381 clocks = <&clks VF610_CLK_USBPHY0>;
382 fsl,anatop = <&anatop>;
383 status = "disabled";
384 };
385
386 usbphy1: usbphy@40050c00 {
387 compatible = "fsl,vf610-usbphy";
388 reg = <0x40050c00 0x400>;
389 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
390 clocks = <&clks VF610_CLK_USBPHY1>;
391 fsl,anatop = <&anatop>;
392 status = "disabled";
393 };
394
395 dcu0: dcu@40058000 {
396 compatible = "fsl,vf610-dcu";
397 reg = <0x40058000 0x1200>;
398 interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
399 clocks = <&clks VF610_CLK_DCU0>,
400 <&clks VF610_CLK_DCU0_DIV>;
401 clock-names = "dcu", "pix";
402 fsl,tcon = <&tcon0>;
403 status = "disabled";
404 };
405
406 i2c0: i2c@40066000 {
407 #address-cells = <1>;
408 #size-cells = <0>;
409 compatible = "fsl,vf610-i2c";
410 reg = <0x40066000 0x1000>;
411 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
412 clocks = <&clks VF610_CLK_I2C0>;
413 clock-names = "ipg";
414 dmas = <&edma0 0 50>,
415 <&edma0 0 51>;
416 dma-names = "rx","tx";
417 status = "disabled";
418 };
419
420 i2c1: i2c@40067000 {
421 #address-cells = <1>;
422 #size-cells = <0>;
423 compatible = "fsl,vf610-i2c";
424 reg = <0x40067000 0x1000>;
425 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
426 clocks = <&clks VF610_CLK_I2C1>;
427 clock-names = "ipg";
428 dmas = <&edma0 0 52>, <&edma0 0 53>;
429 dma-names = "rx","tx";
430 status = "disabled";
431 };
432
433 clks: ccm@4006b000 {
434 compatible = "fsl,vf610-ccm";
435 reg = <0x4006b000 0x1000>;
436 clocks = <&sxosc>, <&fxosc>;
437 clock-names = "sxosc", "fxosc";
438 #clock-cells = <1>;
439 };
440
441 usbdev0: usb@40034000 {
442 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
443 reg = <0x40034000 0x800>;
444 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
445 clocks = <&clks VF610_CLK_USBC0>;
446 fsl,usbphy = <&usbphy0>;
447 fsl,usbmisc = <&usbmisc0 0>;
448 dr_mode = "peripheral";
449 status = "disabled";
450 };
451
452 usbmisc0: usb@40034800 {
453 #index-cells = <1>;
454 compatible = "fsl,vf610-usbmisc";
455 reg = <0x40034800 0x200>;
456 clocks = <&clks VF610_CLK_USBC0>;
457 status = "disabled";
458 };
459
460 src: src@4006e000 {
461 compatible = "fsl,vf610-src", "syscon";
462 reg = <0x4006e000 0x1000>;
463 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
464 };
465 };
466
467 aips1: bus@40080000 {
468 compatible = "fsl,aips-bus", "simple-bus";
469 #address-cells = <1>;
470 #size-cells = <1>;
471 reg = <0x40080000 0x0007f000>;
472 ranges;
473
474 edma1: dma-controller@40098000 {
475 #dma-cells = <2>;
476 compatible = "fsl,vf610-edma";
477 reg = <0x40098000 0x2000>,
478 <0x400a1000 0x1000>,
479 <0x400a2000 0x1000>;
480 dma-channels = <32>;
481 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
482 <11 IRQ_TYPE_LEVEL_HIGH>;
483 interrupt-names = "edma-tx", "edma-err";
484 clock-names = "dmamux0", "dmamux1";
485 clocks = <&clks VF610_CLK_DMAMUX2>,
486 <&clks VF610_CLK_DMAMUX3>;
487 status = "disabled";
488 };
489
490 ocotp: ocotp@400a5000 {
491 compatible = "fsl,vf610-ocotp", "syscon";
492 reg = <0x400a5000 0x1000>;
493 clocks = <&clks VF610_CLK_OCOTP>;
494 };
495
496 snvs0: snvs@400a7000 {
497 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
498 reg = <0x400a7000 0x2000>;
499
500 snvsrtc: snvs-rtc-lp {
501 compatible = "fsl,sec-v4.0-mon-rtc-lp";
502 regmap = <&snvs0>;
503 offset = <0x34>;
504 interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
505 clocks = <&clks VF610_CLK_SNVS>;
506 clock-names = "snvs-rtc";
507 };
508 };
509
510 uart4: serial@400a9000 {
511 compatible = "fsl,vf610-lpuart";
512 reg = <0x400a9000 0x1000>;
513 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
514 clocks = <&clks VF610_CLK_UART4>;
515 clock-names = "ipg";
516 status = "disabled";
517 };
518
519 uart5: serial@400aa000 {
520 compatible = "fsl,vf610-lpuart";
521 reg = <0x400aa000 0x1000>;
522 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
523 clocks = <&clks VF610_CLK_UART5>;
524 clock-names = "ipg";
525 status = "disabled";
526 };
527
528 dspi2: spi@400ac000 {
529 #address-cells = <1>;
530 #size-cells = <0>;
531 compatible = "fsl,vf610-dspi";
532 reg = <0x400ac000 0x1000>;
533 interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
534 clocks = <&clks VF610_CLK_DSPI2>;
535 clock-names = "dspi";
536 spi-num-chipselects = <2>;
537 dmas = <&edma1 0 11>, <&edma1 0 10>;
538 dma-names = "tx", "rx";
539 status = "disabled";
540 };
541
542 dspi3: spi@400ad000 {
543 #address-cells = <1>;
544 #size-cells = <0>;
545 compatible = "fsl,vf610-dspi";
546 reg = <0x400ad000 0x1000>;
547 interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
548 clocks = <&clks VF610_CLK_DSPI3>;
549 clock-names = "dspi";
550 spi-num-chipselects = <2>;
551 dmas = <&edma1 0 13>, <&edma1 0 12>;
552 dma-names = "tx", "rx";
553 status = "disabled";
554 };
555
556 adc1: adc@400bb000 {
557 compatible = "fsl,vf610-adc";
558 reg = <0x400bb000 0x1000>;
559 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
560 clocks = <&clks VF610_CLK_ADC1>;
561 clock-names = "adc";
562 #io-channel-cells = <1>;
563 status = "disabled";
564 fsl,adck-max-frequency = <30000000>, <40000000>,
565 <20000000>;
566 };
567
568 esdhc0: mmc@400b1000 {
569 compatible = "fsl,imx53-esdhc";
570 reg = <0x400b1000 0x1000>;
571 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
572 clocks = <&clks VF610_CLK_IPG_BUS>,
573 <&clks VF610_CLK_PLATFORM_BUS>,
574 <&clks VF610_CLK_ESDHC0>;
575 clock-names = "ipg", "ahb", "per";
576 status = "disabled";
577 };
578
579 esdhc1: mmc@400b2000 {
580 compatible = "fsl,imx53-esdhc";
581 reg = <0x400b2000 0x1000>;
582 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
583 clocks = <&clks VF610_CLK_IPG_BUS>,
584 <&clks VF610_CLK_PLATFORM_BUS>,
585 <&clks VF610_CLK_ESDHC1>;
586 clock-names = "ipg", "ahb", "per";
587 status = "disabled";
588 };
589
590 usbh1: usb@400b4000 {
591 compatible = "fsl,vf610-usb", "fsl,imx27-usb";
592 reg = <0x400b4000 0x800>;
593 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
594 clocks = <&clks VF610_CLK_USBC1>;
595 fsl,usbphy = <&usbphy1>;
596 fsl,usbmisc = <&usbmisc1 0>;
597 dr_mode = "host";
598 status = "disabled";
599 };
600
601 usbmisc1: usb@400b4800 {
602 #index-cells = <1>;
603 compatible = "fsl,vf610-usbmisc";
604 reg = <0x400b4800 0x200>;
605 clocks = <&clks VF610_CLK_USBC1>;
606 status = "disabled";
607 };
608
609 ftm: ftm@400b8000 {
610 compatible = "fsl,ftm-timer";
611 reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
612 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
613 clock-names = "ftm-evt", "ftm-src",
614 "ftm-evt-counter-en", "ftm-src-counter-en";
615 clocks = <&clks VF610_CLK_FTM2>,
616 <&clks VF610_CLK_FTM3>,
617 <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
618 <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
619 status = "disabled";
620 };
621
622 qspi1: spi@400c4000 {
623 #address-cells = <1>;
624 #size-cells = <0>;
625 compatible = "fsl,vf610-qspi";
626 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
627 reg-names = "QuadSPI", "QuadSPI-memory";
628 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
629 clocks = <&clks VF610_CLK_QSPI1_EN>,
630 <&clks VF610_CLK_QSPI1>;
631 clock-names = "qspi_en", "qspi";
632 status = "disabled";
633 };
634
635 dac0: dac@400cc000 {
636 compatible = "fsl,vf610-dac";
637 reg = <0x400cc000 1000>;
638 interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
639 clock-names = "dac";
640 clocks = <&clks VF610_CLK_DAC0>;
641 status = "disabled";
642 };
643
644 dac1: dac@400cd000 {
645 compatible = "fsl,vf610-dac";
646 reg = <0x400cd000 1000>;
647 interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
648 clock-names = "dac";
649 clocks = <&clks VF610_CLK_DAC1>;
650 status = "disabled";
651 };
652
653 fec0: ethernet@400d0000 {
654 compatible = "fsl,mvf600-fec";
655 reg = <0x400d0000 0x1000>;
656 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
657 clocks = <&clks VF610_CLK_ENET0>,
658 <&clks VF610_CLK_ENET0>,
659 <&clks VF610_CLK_ENET>;
660 clock-names = "ipg", "ahb", "ptp";
661 status = "disabled";
662 };
663
664 fec1: ethernet@400d1000 {
665 compatible = "fsl,mvf600-fec";
666 reg = <0x400d1000 0x1000>;
667 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
668 clocks = <&clks VF610_CLK_ENET1>,
669 <&clks VF610_CLK_ENET1>,
670 <&clks VF610_CLK_ENET>;
671 clock-names = "ipg", "ahb", "ptp";
672 status = "disabled";
673 };
674
675 can1: can@400d4000 {
676 compatible = "fsl,vf610-flexcan";
677 reg = <0x400d4000 0x4000>;
678 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
679 clocks = <&clks VF610_CLK_FLEXCAN1>,
680 <&clks VF610_CLK_FLEXCAN1>;
681 clock-names = "ipg", "per";
682 status = "disabled";
683 };
684
685 nfc: nand-controller@400e0000 {
686 #address-cells = <1>;
687 #size-cells = <0>;
688 compatible = "fsl,vf610-nfc";
689 reg = <0x400e0000 0x4000>;
690 interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
691 clocks = <&clks VF610_CLK_NFC>;
692 clock-names = "nfc";
693 status = "disabled";
694 };
695
696 i2c2: i2c@400e6000 {
697 #address-cells = <1>;
698 #size-cells = <0>;
699 compatible = "fsl,vf610-i2c";
700 reg = <0x400e6000 0x1000>;
701 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
702 clocks = <&clks VF610_CLK_I2C2>;
703 clock-names = "ipg";
704 dmas = <&edma0 1 36>,
705 <&edma0 1 37>;
706 dma-names = "rx","tx";
707 status = "disabled";
708 };
709
710 i2c3: i2c@400e7000 {
711 #address-cells = <1>;
712 #size-cells = <0>;
713 compatible = "fsl,vf610-i2c";
714 reg = <0x400e7000 0x1000>;
715 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
716 clocks = <&clks VF610_CLK_I2C3>;
717 clock-names = "ipg";
718 dmas = <&edma0 1 38>, <&edma0 1 39>;
719 dma-names = "rx","tx";
720 status = "disabled";
721 };
722
723 crypto: crypto@400f0000 {
724 compatible = "fsl,sec-v4.0";
725 #address-cells = <1>;
726 #size-cells = <1>;
727 reg = <0x400f0000 0x9000>;
728 ranges = <0 0x400f0000 0x9000>;
729 clocks = <&clks VF610_CLK_CAAM>;
730 clock-names = "ipg";
731
732 sec_jr0: jr@1000 {
733 compatible = "fsl,sec-v4.0-job-ring";
734 reg = <0x1000 0x1000>;
735 interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
736 };
737
738 sec_jr1: jr@2000 {
739 compatible = "fsl,sec-v4.0-job-ring";
740 reg = <0x2000 0x1000>;
741 interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
742 };
743 };
744 };
745 };
746 };