| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include "vf610-zii-dev.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "ZII VF610 Development Board, Rev B"; |
| 11 |
compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; |
| 12 |
|
| 13 |
mdio-mux { |
| 14 |
compatible = "mdio-mux-gpio"; |
| 15 |
pinctrl-0 = <&pinctrl_mdio_mux>; |
| 16 |
pinctrl-names = "default"; |
| 17 |
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH |
| 18 |
&gpio0 9 GPIO_ACTIVE_HIGH |
| 19 |
&gpio0 24 GPIO_ACTIVE_HIGH |
| 20 |
&gpio0 25 GPIO_ACTIVE_HIGH>; |
| 21 |
mdio-parent-bus = <&mdio1>; |
| 22 |
#address-cells = <1>; |
| 23 |
#size-cells = <0>; |
| 24 |
|
| 25 |
mdio_mux_1: mdio@1 { |
| 26 |
reg = <1>; |
| 27 |
#address-cells = <1>; |
| 28 |
#size-cells = <0>; |
| 29 |
|
| 30 |
switch0: switch@0 { |
| 31 |
compatible = "marvell,mv88e6085"; |
| 32 |
pinctrl-0 = <&pinctrl_gpio_switch0>; |
| 33 |
pinctrl-names = "default"; |
| 34 |
reg = <0>; |
| 35 |
dsa,member = <0 0>; |
| 36 |
interrupt-parent = <&gpio0>; |
| 37 |
interrupts = <27 IRQ_TYPE_LEVEL_LOW>; |
| 38 |
interrupt-controller; |
| 39 |
#interrupt-cells = <2>; |
| 40 |
eeprom-length = <512>; |
| 41 |
|
| 42 |
ports { |
| 43 |
#address-cells = <1>; |
| 44 |
#size-cells = <0>; |
| 45 |
|
| 46 |
port@0 { |
| 47 |
reg = <0>; |
| 48 |
label = "lan0"; |
| 49 |
phy-handle = <&switch0phy0>; |
| 50 |
}; |
| 51 |
|
| 52 |
port@1 { |
| 53 |
reg = <1>; |
| 54 |
label = "lan1"; |
| 55 |
phy-handle = <&switch0phy1>; |
| 56 |
}; |
| 57 |
|
| 58 |
port@2 { |
| 59 |
reg = <2>; |
| 60 |
label = "lan2"; |
| 61 |
phy-handle = <&switch0phy2>; |
| 62 |
}; |
| 63 |
|
| 64 |
switch0port5: port@5 { |
| 65 |
reg = <5>; |
| 66 |
label = "dsa"; |
| 67 |
phy-mode = "rgmii-txid"; |
| 68 |
link = <&switch1port6 |
| 69 |
&switch2port9>; |
| 70 |
fixed-link { |
| 71 |
speed = <1000>; |
| 72 |
full-duplex; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
port@6 { |
| 77 |
reg = <6>; |
| 78 |
phy-mode = "rmii"; |
| 79 |
ethernet = <&fec1>; |
| 80 |
|
| 81 |
fixed-link { |
| 82 |
speed = <100>; |
| 83 |
full-duplex; |
| 84 |
}; |
| 85 |
}; |
| 86 |
}; |
| 87 |
mdio { |
| 88 |
#address-cells = <1>; |
| 89 |
#size-cells = <0>; |
| 90 |
switch0phy0: switch0phy0@0 { |
| 91 |
reg = <0>; |
| 92 |
interrupt-parent = <&switch0>; |
| 93 |
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; |
| 94 |
}; |
| 95 |
switch0phy1: switch1phy0@1 { |
| 96 |
reg = <1>; |
| 97 |
interrupt-parent = <&switch0>; |
| 98 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; |
| 99 |
}; |
| 100 |
switch0phy2: switch1phy0@2 { |
| 101 |
reg = <2>; |
| 102 |
interrupt-parent = <&switch0>; |
| 103 |
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; |
| 104 |
}; |
| 105 |
}; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
mdio_mux_2: mdio@2 { |
| 110 |
reg = <2>; |
| 111 |
#address-cells = <1>; |
| 112 |
#size-cells = <0>; |
| 113 |
|
| 114 |
switch1: switch@0 { |
| 115 |
compatible = "marvell,mv88e6085"; |
| 116 |
pinctrl-0 = <&pinctrl_gpio_switch1>; |
| 117 |
pinctrl-names = "default"; |
| 118 |
reg = <0>; |
| 119 |
dsa,member = <0 1>; |
| 120 |
interrupt-parent = <&gpio0>; |
| 121 |
interrupts = <26 IRQ_TYPE_LEVEL_LOW>; |
| 122 |
interrupt-controller; |
| 123 |
#interrupt-cells = <2>; |
| 124 |
eeprom-length = <512>; |
| 125 |
|
| 126 |
ports { |
| 127 |
#address-cells = <1>; |
| 128 |
#size-cells = <0>; |
| 129 |
|
| 130 |
port@0 { |
| 131 |
reg = <0>; |
| 132 |
label = "lan3"; |
| 133 |
phy-handle = <&switch1phy0>; |
| 134 |
}; |
| 135 |
|
| 136 |
port@1 { |
| 137 |
reg = <1>; |
| 138 |
label = "lan4"; |
| 139 |
phy-handle = <&switch1phy1>; |
| 140 |
}; |
| 141 |
|
| 142 |
port@2 { |
| 143 |
reg = <2>; |
| 144 |
label = "lan5"; |
| 145 |
phy-handle = <&switch1phy2>; |
| 146 |
}; |
| 147 |
|
| 148 |
switch1port5: port@5 { |
| 149 |
reg = <5>; |
| 150 |
label = "dsa"; |
| 151 |
link = <&switch2port9>; |
| 152 |
phy-mode = "1000base-x"; |
| 153 |
|
| 154 |
fixed-link { |
| 155 |
speed = <1000>; |
| 156 |
full-duplex; |
| 157 |
}; |
| 158 |
}; |
| 159 |
|
| 160 |
switch1port6: port@6 { |
| 161 |
reg = <6>; |
| 162 |
label = "dsa"; |
| 163 |
phy-mode = "rgmii-txid"; |
| 164 |
link = <&switch0port5>; |
| 165 |
fixed-link { |
| 166 |
speed = <1000>; |
| 167 |
full-duplex; |
| 168 |
}; |
| 169 |
}; |
| 170 |
}; |
| 171 |
mdio { |
| 172 |
#address-cells = <1>; |
| 173 |
#size-cells = <0>; |
| 174 |
|
| 175 |
switch1phy0: switch1phy0@0 { |
| 176 |
reg = <0>; |
| 177 |
interrupt-parent = <&switch1>; |
| 178 |
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; |
| 179 |
}; |
| 180 |
|
| 181 |
switch1phy1: switch1phy0@1 { |
| 182 |
reg = <1>; |
| 183 |
interrupt-parent = <&switch1>; |
| 184 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; |
| 185 |
}; |
| 186 |
|
| 187 |
switch1phy2: switch1phy0@2 { |
| 188 |
reg = <2>; |
| 189 |
interrupt-parent = <&switch1>; |
| 190 |
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
mdio_mux_4: mdio@4 { |
| 197 |
#address-cells = <1>; |
| 198 |
#size-cells = <0>; |
| 199 |
reg = <4>; |
| 200 |
|
| 201 |
switch2: switch@0 { |
| 202 |
compatible = "marvell,mv88e6085"; |
| 203 |
reg = <0>; |
| 204 |
dsa,member = <0 2>; |
| 205 |
|
| 206 |
ports { |
| 207 |
#address-cells = <1>; |
| 208 |
#size-cells = <0>; |
| 209 |
|
| 210 |
port@0 { |
| 211 |
reg = <0>; |
| 212 |
label = "lan6"; |
| 213 |
phy-handle = <&switch2phy0>; |
| 214 |
phy-mode = "sgmii"; |
| 215 |
}; |
| 216 |
|
| 217 |
port@1 { |
| 218 |
reg = <1>; |
| 219 |
label = "lan7"; |
| 220 |
phy-handle = <&switch2phy1>; |
| 221 |
phy-mode = "sgmii"; |
| 222 |
}; |
| 223 |
|
| 224 |
port@2 { |
| 225 |
reg = <2>; |
| 226 |
label = "lan8"; |
| 227 |
phy-handle = <&switch2phy2>; |
| 228 |
}; |
| 229 |
|
| 230 |
port@3 { |
| 231 |
reg = <3>; |
| 232 |
label = "optical3"; |
| 233 |
|
| 234 |
fixed-link { |
| 235 |
speed = <1000>; |
| 236 |
full-duplex; |
| 237 |
link-gpios = <&gpio6 2 |
| 238 |
GPIO_ACTIVE_HIGH>; |
| 239 |
}; |
| 240 |
}; |
| 241 |
|
| 242 |
port@4 { |
| 243 |
reg = <4>; |
| 244 |
label = "optical4"; |
| 245 |
|
| 246 |
fixed-link { |
| 247 |
speed = <1000>; |
| 248 |
full-duplex; |
| 249 |
link-gpios = <&gpio6 3 |
| 250 |
GPIO_ACTIVE_HIGH>; |
| 251 |
}; |
| 252 |
}; |
| 253 |
|
| 254 |
switch2port9: port@9 { |
| 255 |
reg = <9>; |
| 256 |
label = "dsa"; |
| 257 |
phy-mode = "1000base-x"; |
| 258 |
link = <&switch1port5 |
| 259 |
&switch0port5>; |
| 260 |
|
| 261 |
fixed-link { |
| 262 |
speed = <1000>; |
| 263 |
full-duplex; |
| 264 |
}; |
| 265 |
}; |
| 266 |
}; |
| 267 |
mdio { |
| 268 |
#address-cells = <1>; |
| 269 |
#size-cells = <0>; |
| 270 |
|
| 271 |
switch2phy0: phy@0 { |
| 272 |
reg = <0>; |
| 273 |
}; |
| 274 |
switch2phy1: phy@1 { |
| 275 |
reg = <1>; |
| 276 |
}; |
| 277 |
switch2phy2: phy@2 { |
| 278 |
reg = <2>; |
| 279 |
}; |
| 280 |
}; |
| 281 |
}; |
| 282 |
}; |
| 283 |
|
| 284 |
mdio_mux_8: mdio@8 { |
| 285 |
reg = <8>; |
| 286 |
#address-cells = <1>; |
| 287 |
#size-cells = <0>; |
| 288 |
}; |
| 289 |
}; |
| 290 |
|
| 291 |
spi-0 { |
| 292 |
compatible = "spi-gpio"; |
| 293 |
pinctrl-0 = <&pinctrl_gpio_spi0>; |
| 294 |
pinctrl-names = "default"; |
| 295 |
#address-cells = <1>; |
| 296 |
#size-cells = <0>; |
| 297 |
sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 298 |
mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; |
| 299 |
miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| 300 |
cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW |
| 301 |
&gpio1 8 GPIO_ACTIVE_HIGH>; |
| 302 |
num-chipselects = <2>; |
| 303 |
|
| 304 |
flash@0 { |
| 305 |
compatible = "m25p128", "jedec,spi-nor"; |
| 306 |
#address-cells = <1>; |
| 307 |
#size-cells = <1>; |
| 308 |
reg = <0>; |
| 309 |
spi-max-frequency = <1000000>; |
| 310 |
}; |
| 311 |
|
| 312 |
at93c46d@1 { |
| 313 |
compatible = "atmel,at93c46d"; |
| 314 |
pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>; |
| 315 |
pinctrl-names = "default"; |
| 316 |
reg = <1>; |
| 317 |
spi-max-frequency = <500000>; |
| 318 |
spi-cs-high; |
| 319 |
data-size = <16>; |
| 320 |
select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
}; |
| 324 |
|
| 325 |
&i2c0 { |
| 326 |
gpio5: io-expander@20 { |
| 327 |
compatible = "nxp,pca9554"; |
| 328 |
reg = <0x20>; |
| 329 |
gpio-controller; |
| 330 |
#gpio-cells = <2>; |
| 331 |
|
| 332 |
}; |
| 333 |
|
| 334 |
gpio6: io-expander@22 { |
| 335 |
compatible = "nxp,pca9554"; |
| 336 |
pinctrl-names = "default"; |
| 337 |
pinctrl-0 = <&pinctrl_pca9554_22>; |
| 338 |
reg = <0x22>; |
| 339 |
gpio-controller; |
| 340 |
#gpio-cells = <2>; |
| 341 |
#interrupt-cells = <2>; |
| 342 |
interrupt-controller; |
| 343 |
interrupt-parent = <&gpio3>; |
| 344 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
&i2c2 { |
| 349 |
i2c-mux@70 { |
| 350 |
compatible = "nxp,pca9548"; |
| 351 |
pinctrl-0 = <&pinctrl_i2c_mux_reset>; |
| 352 |
pinctrl-names = "default"; |
| 353 |
#address-cells = <1>; |
| 354 |
#size-cells = <0>; |
| 355 |
reg = <0x70>; |
| 356 |
reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; |
| 357 |
|
| 358 |
i2c@0 { |
| 359 |
#address-cells = <1>; |
| 360 |
#size-cells = <0>; |
| 361 |
reg = <0>; |
| 362 |
|
| 363 |
sfp1: eeprom@50 { |
| 364 |
compatible = "atmel,24c02"; |
| 365 |
reg = <0x50>; |
| 366 |
}; |
| 367 |
}; |
| 368 |
|
| 369 |
i2c@1 { |
| 370 |
#address-cells = <1>; |
| 371 |
#size-cells = <0>; |
| 372 |
reg = <1>; |
| 373 |
|
| 374 |
sfp2: eeprom@50 { |
| 375 |
compatible = "atmel,24c02"; |
| 376 |
reg = <0x50>; |
| 377 |
}; |
| 378 |
}; |
| 379 |
|
| 380 |
i2c@2 { |
| 381 |
#address-cells = <1>; |
| 382 |
#size-cells = <0>; |
| 383 |
reg = <2>; |
| 384 |
|
| 385 |
sfp3: eeprom@50 { |
| 386 |
compatible = "atmel,24c02"; |
| 387 |
reg = <0x50>; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
i2c@3 { |
| 392 |
#address-cells = <1>; |
| 393 |
#size-cells = <0>; |
| 394 |
reg = <3>; |
| 395 |
|
| 396 |
sfp4: eeprom@50 { |
| 397 |
compatible = "atmel,24c02"; |
| 398 |
reg = <0x50>; |
| 399 |
}; |
| 400 |
}; |
| 401 |
|
| 402 |
i2c@4 { |
| 403 |
#address-cells = <1>; |
| 404 |
#size-cells = <0>; |
| 405 |
reg = <4>; |
| 406 |
}; |
| 407 |
}; |
| 408 |
}; |
| 409 |
|
| 410 |
&mdio1 { |
| 411 |
clock-frequency = <5000000>; |
| 412 |
}; |
| 413 |
|
| 414 |
&iomuxc { |
| 415 |
pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp { |
| 416 |
fsl,pins = < |
| 417 |
VF610_PAD_PTE27__GPIO_132 0x33e2 |
| 418 |
>; |
| 419 |
}; |
| 420 |
|
| 421 |
pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp { |
| 422 |
fsl,pins = < |
| 423 |
VF610_PAD_PTB22__GPIO_44 0x33e2 |
| 424 |
VF610_PAD_PTB21__GPIO_43 0x33e2 |
| 425 |
VF610_PAD_PTB20__GPIO_42 0x33e1 |
| 426 |
VF610_PAD_PTB19__GPIO_41 0x33e2 |
| 427 |
VF610_PAD_PTB18__GPIO_40 0x33e2 |
| 428 |
>; |
| 429 |
}; |
| 430 |
|
| 431 |
pinctrl_mdio_mux: pinctrl-mdio-mux-grp { |
| 432 |
fsl,pins = < |
| 433 |
VF610_PAD_PTA18__GPIO_8 0x31c2 |
| 434 |
VF610_PAD_PTA19__GPIO_9 0x31c2 |
| 435 |
VF610_PAD_PTB2__GPIO_24 0x31c2 |
| 436 |
VF610_PAD_PTB3__GPIO_25 0x31c2 |
| 437 |
>; |
| 438 |
}; |
| 439 |
|
| 440 |
pinctrl_pca9554_22: pinctrl-pca95540-22-grp { |
| 441 |
fsl,pins = < |
| 442 |
VF610_PAD_PTB28__GPIO_98 0x219d |
| 443 |
>; |
| 444 |
}; |
| 445 |
}; |