| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright 2018 |
| 4 |
* Lukasz Majewski, DENX Software Engineering, [email protected] |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include "vf610.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Liebherr BK4 controller"; |
| 12 |
compatible = "lwn,bk4", "fsl,vf610"; |
| 13 |
|
| 14 |
chosen { |
| 15 |
stdout-path = &uart1; |
| 16 |
}; |
| 17 |
|
| 18 |
memory@80000000 { |
| 19 |
device_type = "memory"; |
| 20 |
reg = <0x80000000 0x8000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
audio_ext: oscillator-audio { |
| 24 |
compatible = "fixed-clock"; |
| 25 |
#clock-cells = <0>; |
| 26 |
clock-frequency = <24576000>; |
| 27 |
}; |
| 28 |
|
| 29 |
enet_ext: oscillator-ethernet { |
| 30 |
compatible = "fixed-clock"; |
| 31 |
#clock-cells = <0>; |
| 32 |
clock-frequency = <50000000>; |
| 33 |
}; |
| 34 |
|
| 35 |
leds { |
| 36 |
compatible = "gpio-leds"; |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&pinctrl_gpio_leds>; |
| 39 |
|
| 40 |
/* LED D5 */ |
| 41 |
led0: led-heartbeat { |
| 42 |
label = "heartbeat"; |
| 43 |
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; |
| 44 |
default-state = "on"; |
| 45 |
linux,default-trigger = "heartbeat"; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
reg_3p3v: regulator-3p3v { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "3P3V"; |
| 52 |
regulator-min-microvolt = <3300000>; |
| 53 |
regulator-max-microvolt = <3300000>; |
| 54 |
regulator-always-on; |
| 55 |
}; |
| 56 |
|
| 57 |
reg_vcc_3v3_mcu: regulator-vcc3v3mcu { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "vcc_3v3_mcu"; |
| 60 |
regulator-min-microvolt = <3300000>; |
| 61 |
regulator-max-microvolt = <3300000>; |
| 62 |
}; |
| 63 |
|
| 64 |
spi { |
| 65 |
compatible = "spi-gpio"; |
| 66 |
pinctrl-0 = <&pinctrl_gpio_spi>; |
| 67 |
pinctrl-names = "default"; |
| 68 |
#address-cells = <1>; |
| 69 |
#size-cells = <0>; |
| 70 |
/* PTD12 ->RPIO[91] */ |
| 71 |
sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; |
| 72 |
/* PTD10 ->RPIO[89] */ |
| 73 |
miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; |
| 74 |
num-chipselects = <0>; |
| 75 |
|
| 76 |
gpio@0 { |
| 77 |
compatible = "pisosr-gpio"; |
| 78 |
reg = <0>; |
| 79 |
gpio-controller; |
| 80 |
#gpio-cells = <2>; |
| 81 |
/* PTB18 -> RGPIO[40] */ |
| 82 |
load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| 83 |
spi-max-frequency = <100000>; |
| 84 |
}; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
&adc0 { |
| 89 |
vref-supply = <®_vcc_3v3_mcu>; |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
&adc1 { |
| 94 |
vref-supply = <®_vcc_3v3_mcu>; |
| 95 |
status = "okay"; |
| 96 |
}; |
| 97 |
|
| 98 |
&can0 { |
| 99 |
pinctrl-names = "default"; |
| 100 |
pinctrl-0 = <&pinctrl_can0>; |
| 101 |
status = "okay"; |
| 102 |
}; |
| 103 |
|
| 104 |
&can1 { |
| 105 |
pinctrl-names = "default"; |
| 106 |
pinctrl-0 = <&pinctrl_can1>; |
| 107 |
status = "okay"; |
| 108 |
}; |
| 109 |
|
| 110 |
&clks { |
| 111 |
clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; |
| 112 |
clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; |
| 113 |
}; |
| 114 |
|
| 115 |
&dspi0 { |
| 116 |
pinctrl-names = "default"; |
| 117 |
pinctrl-0 = <&pinctrl_dspi0>; |
| 118 |
bus-num = <0>; |
| 119 |
status = "okay"; |
| 120 |
|
| 121 |
spidev0@0 { |
| 122 |
compatible = "lwn,bk4-spi"; |
| 123 |
spi-max-frequency = <30000000>; |
| 124 |
reg = <0>; |
| 125 |
fsl,spi-cs-sck-delay = <200>; |
| 126 |
fsl,spi-sck-cs-delay = <400>; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
&dspi3 { |
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&pinctrl_dspi3>; |
| 133 |
bus-num = <3>; |
| 134 |
status = "okay"; |
| 135 |
spi-slave; |
| 136 |
#address-cells = <0>; |
| 137 |
|
| 138 |
slave { |
| 139 |
compatible = "lwn,bk4-spi"; |
| 140 |
spi-max-frequency = <30000000>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
&edma0 { |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
&edma1 { |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&esdhc1 { |
| 153 |
pinctrl-names = "default"; |
| 154 |
pinctrl-0 = <&pinctrl_esdhc1>; |
| 155 |
bus-width = <4>; |
| 156 |
cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; |
| 157 |
status = "okay"; |
| 158 |
}; |
| 159 |
|
| 160 |
&fec0 { |
| 161 |
phy-mode = "rmii"; |
| 162 |
phy-handle = <ðphy0>; |
| 163 |
pinctrl-names = "default"; |
| 164 |
pinctrl-0 = <&pinctrl_fec0>; |
| 165 |
status = "okay"; |
| 166 |
|
| 167 |
mdio { |
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <0>; |
| 170 |
|
| 171 |
ethphy0: ethernet-phy@1 { |
| 172 |
reg = <1>; |
| 173 |
clocks = <&clks VF610_CLK_ENET_50M>; |
| 174 |
clock-names = "rmii-ref"; |
| 175 |
}; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&fec1 { |
| 180 |
phy-mode = "rmii"; |
| 181 |
phy-handle = <ðphy1>; |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&pinctrl_fec1>; |
| 184 |
status = "okay"; |
| 185 |
|
| 186 |
mdio { |
| 187 |
#address-cells = <1>; |
| 188 |
#size-cells = <0>; |
| 189 |
|
| 190 |
ethphy1: ethernet-phy@1 { |
| 191 |
reg = <1>; |
| 192 |
clocks = <&clks VF610_CLK_ENET_50M>; |
| 193 |
clock-names = "rmii-ref"; |
| 194 |
}; |
| 195 |
}; |
| 196 |
}; |
| 197 |
|
| 198 |
&i2c2 { |
| 199 |
clock-frequency = <400000>; |
| 200 |
pinctrl-names = "default"; |
| 201 |
pinctrl-0 = <&pinctrl_i2c2>; |
| 202 |
status = "okay"; |
| 203 |
|
| 204 |
at24c256: eeprom@50 { |
| 205 |
compatible = "atmel,24c256"; |
| 206 |
reg = <0x50>; |
| 207 |
}; |
| 208 |
|
| 209 |
m41t62: rtc@68 { |
| 210 |
compatible = "st,m41t62"; |
| 211 |
reg = <0x68>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
&nfc { |
| 216 |
assigned-clocks = <&clks VF610_CLK_NFC>; |
| 217 |
assigned-clock-rates = <33000000>; |
| 218 |
pinctrl-names = "default"; |
| 219 |
pinctrl-0 = <&pinctrl_nfc>; |
| 220 |
status = "okay"; |
| 221 |
|
| 222 |
nand@0 { |
| 223 |
compatible = "fsl,vf610-nfc-nandcs"; |
| 224 |
reg = <0>; |
| 225 |
#address-cells = <1>; |
| 226 |
#size-cells = <1>; |
| 227 |
nand-bus-width = <16>; |
| 228 |
nand-ecc-mode = "hw"; |
| 229 |
nand-ecc-strength = <24>; |
| 230 |
nand-ecc-step-size = <2048>; |
| 231 |
nand-on-flash-bbt; |
| 232 |
}; |
| 233 |
}; |
| 234 |
|
| 235 |
&qspi0 { |
| 236 |
pinctrl-names = "default"; |
| 237 |
pinctrl-0 = <&pinctrl_qspi0>; |
| 238 |
status = "okay"; |
| 239 |
|
| 240 |
n25q128a13_4: flash@0 { |
| 241 |
compatible = "n25q128a13", "jedec,spi-nor"; |
| 242 |
#address-cells = <1>; |
| 243 |
#size-cells = <1>; |
| 244 |
spi-max-frequency = <66000000>; |
| 245 |
spi-rx-bus-width = <4>; |
| 246 |
reg = <0>; |
| 247 |
}; |
| 248 |
|
| 249 |
n25q128a13_2: flash@2 { |
| 250 |
compatible = "n25q128a13", "jedec,spi-nor"; |
| 251 |
#address-cells = <1>; |
| 252 |
#size-cells = <1>; |
| 253 |
spi-max-frequency = <66000000>; |
| 254 |
spi-rx-bus-width = <2>; |
| 255 |
reg = <2>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
&uart0 { |
| 260 |
pinctrl-names = "default"; |
| 261 |
pinctrl-0 = <&pinctrl_uart0>; |
| 262 |
/delete-property/dma-names; |
| 263 |
status = "okay"; |
| 264 |
}; |
| 265 |
|
| 266 |
&uart1 { |
| 267 |
pinctrl-names = "default"; |
| 268 |
pinctrl-0 = <&pinctrl_uart1>; |
| 269 |
/delete-property/dma-names; |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
&uart2 { |
| 274 |
pinctrl-names = "default"; |
| 275 |
pinctrl-0 = <&pinctrl_uart2>; |
| 276 |
/delete-property/dma-names; |
| 277 |
status = "okay"; |
| 278 |
}; |
| 279 |
|
| 280 |
&uart3 { |
| 281 |
pinctrl-names = "default"; |
| 282 |
pinctrl-0 = <&pinctrl_uart3>; |
| 283 |
/delete-property/dma-names; |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&usbdev0 { |
| 288 |
disable-over-current; |
| 289 |
status = "okay"; |
| 290 |
}; |
| 291 |
|
| 292 |
&usbh1 { |
| 293 |
disable-over-current; |
| 294 |
status = "okay"; |
| 295 |
}; |
| 296 |
|
| 297 |
&usbmisc0 { |
| 298 |
status = "okay"; |
| 299 |
}; |
| 300 |
|
| 301 |
&usbmisc1 { |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&usbphy0 { |
| 306 |
status = "okay"; |
| 307 |
}; |
| 308 |
|
| 309 |
&usbphy1 { |
| 310 |
status = "okay"; |
| 311 |
}; |
| 312 |
|
| 313 |
&iomuxc { |
| 314 |
pinctrl-names = "default"; |
| 315 |
pinctrl-0 = <&pinctrl_hog>; |
| 316 |
|
| 317 |
pinctrl_hog: hoggrp { |
| 318 |
fsl,pins = < |
| 319 |
/* One_Wire_PSU_EN */ |
| 320 |
VF610_PAD_PTC29__GPIO_102 0x1183 |
| 321 |
/* SPI ENABLE */ |
| 322 |
VF610_PAD_PTB26__GPIO_96 0x1183 |
| 323 |
/* EB control */ |
| 324 |
VF610_PAD_PTE14__GPIO_119 0x1183 |
| 325 |
VF610_PAD_PTE4__GPIO_109 0x1181 |
| 326 |
/* Feedback_Lines */ |
| 327 |
VF610_PAD_PTC31__GPIO_104 0x1181 |
| 328 |
VF610_PAD_PTA7__GPIO_134 0x1181 |
| 329 |
VF610_PAD_PTD9__GPIO_88 0x1181 |
| 330 |
VF610_PAD_PTE1__GPIO_106 0x1183 |
| 331 |
VF610_PAD_PTB2__GPIO_24 0x1181 |
| 332 |
VF610_PAD_PTB3__GPIO_25 0x1181 |
| 333 |
VF610_PAD_PTB1__GPIO_23 0x1181 |
| 334 |
/* SDHC Enable */ |
| 335 |
VF610_PAD_PTE19__GPIO_124 0x1183 |
| 336 |
/* SDHC Overcurrent */ |
| 337 |
VF610_PAD_PTB23__GPIO_93 0x1181 |
| 338 |
/* GPI */ |
| 339 |
VF610_PAD_PTE2__GPIO_107 0x1181 |
| 340 |
VF610_PAD_PTE3__GPIO_108 0x1181 |
| 341 |
VF610_PAD_PTE5__GPIO_110 0x1181 |
| 342 |
VF610_PAD_PTE6__GPIO_111 0x1181 |
| 343 |
/* GPO */ |
| 344 |
VF610_PAD_PTE0__GPIO_105 0x1183 |
| 345 |
VF610_PAD_PTE7__GPIO_112 0x1183 |
| 346 |
/* RS485 Control */ |
| 347 |
VF610_PAD_PTB8__GPIO_30 0x1183 |
| 348 |
VF610_PAD_PTB9__GPIO_31 0x1183 |
| 349 |
VF610_PAD_PTE8__GPIO_113 0x1183 |
| 350 |
/* MPBUS MPB_EN */ |
| 351 |
VF610_PAD_PTE28__GPIO_133 0x1183 |
| 352 |
/* MISC */ |
| 353 |
VF610_PAD_PTE10__GPIO_115 0x1183 |
| 354 |
VF610_PAD_PTE11__GPIO_116 0x1183 |
| 355 |
VF610_PAD_PTE17__GPIO_122 0x1183 |
| 356 |
VF610_PAD_PTC30__GPIO_103 0x1183 |
| 357 |
VF610_PAD_PTB0__GPIO_22 0x1181 |
| 358 |
/* RESETINFO */ |
| 359 |
VF610_PAD_PTE26__GPIO_131 0x1183 |
| 360 |
VF610_PAD_PTD6__GPIO_85 0x1181 |
| 361 |
VF610_PAD_PTE27__GPIO_132 0x1181 |
| 362 |
VF610_PAD_PTE13__GPIO_118 0x1181 |
| 363 |
VF610_PAD_PTE21__GPIO_126 0x1181 |
| 364 |
VF610_PAD_PTE22__GPIO_127 0x1181 |
| 365 |
/* EE_5V_EN */ |
| 366 |
VF610_PAD_PTE18__GPIO_123 0x1183 |
| 367 |
/* EE_5V_OC_N */ |
| 368 |
VF610_PAD_PTE25__GPIO_130 0x1181 |
| 369 |
>; |
| 370 |
}; |
| 371 |
|
| 372 |
pinctrl_can0: can0grp { |
| 373 |
fsl,pins = < |
| 374 |
VF610_PAD_PTB14__CAN0_RX 0x1181 |
| 375 |
VF610_PAD_PTB15__CAN0_TX 0x1182 |
| 376 |
>; |
| 377 |
}; |
| 378 |
|
| 379 |
pinctrl_can1: can1grp { |
| 380 |
fsl,pins = < |
| 381 |
VF610_PAD_PTB16__CAN1_RX 0x1181 |
| 382 |
VF610_PAD_PTB17__CAN1_TX 0x1182 |
| 383 |
>; |
| 384 |
}; |
| 385 |
|
| 386 |
pinctrl_dspi0: dspi0grp { |
| 387 |
fsl,pins = < |
| 388 |
VF610_PAD_PTB18__DSPI0_CS1 0x1182 |
| 389 |
VF610_PAD_PTB19__DSPI0_CS0 0x1182 |
| 390 |
VF610_PAD_PTB20__DSPI0_SIN 0x1181 |
| 391 |
VF610_PAD_PTB21__DSPI0_SOUT 0x1182 |
| 392 |
VF610_PAD_PTB22__DSPI0_SCK 0x1182 |
| 393 |
>; |
| 394 |
}; |
| 395 |
|
| 396 |
pinctrl_dspi3: dspi3grp { |
| 397 |
fsl,pins = < |
| 398 |
VF610_PAD_PTD10__DSPI3_CS0 0x1181 |
| 399 |
VF610_PAD_PTD11__DSPI3_SIN 0x1181 |
| 400 |
VF610_PAD_PTD12__DSPI3_SOUT 0x1182 |
| 401 |
VF610_PAD_PTD13__DSPI3_SCK 0x1181 |
| 402 |
>; |
| 403 |
}; |
| 404 |
|
| 405 |
pinctrl_esdhc1: esdhc1grp { |
| 406 |
fsl,pins = < |
| 407 |
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef |
| 408 |
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef |
| 409 |
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef |
| 410 |
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef |
| 411 |
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef |
| 412 |
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef |
| 413 |
VF610_PAD_PTB28__GPIO_98 0x219d |
| 414 |
>; |
| 415 |
}; |
| 416 |
|
| 417 |
pinctrl_fec0: fec0grp { |
| 418 |
fsl,pins = < |
| 419 |
VF610_PAD_PTA6__RMII_CLKIN 0x30dd |
| 420 |
VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de |
| 421 |
VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df |
| 422 |
VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd |
| 423 |
VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd |
| 424 |
VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd |
| 425 |
VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd |
| 426 |
VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de |
| 427 |
VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de |
| 428 |
VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de |
| 429 |
>; |
| 430 |
}; |
| 431 |
|
| 432 |
pinctrl_fec1: fec1grp { |
| 433 |
fsl,pins = < |
| 434 |
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de |
| 435 |
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df |
| 436 |
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd |
| 437 |
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd |
| 438 |
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd |
| 439 |
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd |
| 440 |
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de |
| 441 |
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de |
| 442 |
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de |
| 443 |
>; |
| 444 |
}; |
| 445 |
|
| 446 |
pinctrl_gpio_leds: gpioledsgrp { |
| 447 |
fsl,pins = < |
| 448 |
/* Heart bit LED */ |
| 449 |
VF610_PAD_PTE12__GPIO_117 0x1183 |
| 450 |
/* LEDS */ |
| 451 |
VF610_PAD_PTE15__GPIO_120 0x1183 |
| 452 |
VF610_PAD_PTA12__GPIO_5 0x1183 |
| 453 |
VF610_PAD_PTA16__GPIO_6 0x1183 |
| 454 |
VF610_PAD_PTE9__GPIO_114 0x1183 |
| 455 |
VF610_PAD_PTE20__GPIO_125 0x1183 |
| 456 |
VF610_PAD_PTE23__GPIO_128 0x1183 |
| 457 |
VF610_PAD_PTE16__GPIO_121 0x1183 |
| 458 |
>; |
| 459 |
}; |
| 460 |
|
| 461 |
pinctrl_gpio_spi: pinctrl-gpio-spigrp { |
| 462 |
fsl,pins = < |
| 463 |
VF610_PAD_PTB18__GPIO_40 0x1183 |
| 464 |
VF610_PAD_PTD10__GPIO_89 0x1183 |
| 465 |
VF610_PAD_PTD12__GPIO_91 0x1183 |
| 466 |
>; |
| 467 |
}; |
| 468 |
|
| 469 |
pinctrl_i2c2: i2c2grp { |
| 470 |
fsl,pins = < |
| 471 |
VF610_PAD_PTA22__I2C2_SCL 0x34df |
| 472 |
VF610_PAD_PTA23__I2C2_SDA 0x34df |
| 473 |
>; |
| 474 |
}; |
| 475 |
|
| 476 |
pinctrl_nfc: nfcgrp { |
| 477 |
fsl,pins = < |
| 478 |
VF610_PAD_PTD23__NF_IO7 0x28df |
| 479 |
VF610_PAD_PTD22__NF_IO6 0x28df |
| 480 |
VF610_PAD_PTD21__NF_IO5 0x28df |
| 481 |
VF610_PAD_PTD20__NF_IO4 0x28df |
| 482 |
VF610_PAD_PTD19__NF_IO3 0x28df |
| 483 |
VF610_PAD_PTD18__NF_IO2 0x28df |
| 484 |
VF610_PAD_PTD17__NF_IO1 0x28df |
| 485 |
VF610_PAD_PTD16__NF_IO0 0x28df |
| 486 |
VF610_PAD_PTB24__NF_WE_B 0x28c2 |
| 487 |
VF610_PAD_PTB25__NF_CE0_B 0x28c2 |
| 488 |
VF610_PAD_PTB27__NF_RE_B 0x28c2 |
| 489 |
VF610_PAD_PTC26__NF_RB_B 0x283d |
| 490 |
VF610_PAD_PTC27__NF_ALE 0x28c2 |
| 491 |
VF610_PAD_PTC28__NF_CLE 0x28c2 |
| 492 |
>; |
| 493 |
}; |
| 494 |
|
| 495 |
pinctrl_qspi0: qspi0grp { |
| 496 |
fsl,pins = < |
| 497 |
VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f |
| 498 |
VF610_PAD_PTD1__QSPI0_A_CS0 0x397f |
| 499 |
VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f |
| 500 |
VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f |
| 501 |
VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f |
| 502 |
VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f |
| 503 |
VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f |
| 504 |
VF610_PAD_PTD8__QSPI0_B_CS0 0x397f |
| 505 |
VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f |
| 506 |
VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f |
| 507 |
>; |
| 508 |
}; |
| 509 |
|
| 510 |
pinctrl_uart0: uart0grp { |
| 511 |
fsl,pins = < |
| 512 |
VF610_PAD_PTB10__UART0_TX 0x21a2 |
| 513 |
VF610_PAD_PTB11__UART0_RX 0x21a1 |
| 514 |
>; |
| 515 |
}; |
| 516 |
|
| 517 |
pinctrl_uart1: uart1grp { |
| 518 |
fsl,pins = < |
| 519 |
VF610_PAD_PTB4__UART1_TX 0x21a2 |
| 520 |
VF610_PAD_PTB5__UART1_RX 0x21a1 |
| 521 |
>; |
| 522 |
}; |
| 523 |
|
| 524 |
pinctrl_uart2: uart2grp { |
| 525 |
fsl,pins = < |
| 526 |
VF610_PAD_PTB6__UART2_TX 0x21a2 |
| 527 |
VF610_PAD_PTB7__UART2_RX 0x21a1 |
| 528 |
>; |
| 529 |
}; |
| 530 |
|
| 531 |
pinctrl_uart3: uart3grp { |
| 532 |
fsl,pins = < |
| 533 |
VF610_PAD_PTA20__UART3_TX 0x21a2 |
| 534 |
VF610_PAD_PTA21__UART3_RX 0x21a1 |
| 535 |
>; |
| 536 |
}; |
| 537 |
}; |