| 1 |
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| 2 |
/* |
| 3 |
* Copyright 2013-2014 Freescale Semiconductor, Inc. |
| 4 |
* Copyright 2018-2023 TQ-Systems GmbH <[email protected]>, |
| 5 |
* D-82229 Seefeld, Germany. |
| 6 |
* Author: Alexander Stein |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/linux-event-codes.h> |
| 13 |
#include <dt-bindings/leds/common.h> |
| 14 |
#include <dt-bindings/leds/leds-pca9532.h> |
| 15 |
#include <dt-bindings/net/ti-dp83867.h> |
| 16 |
|
| 17 |
#include "ls1021a-tqmls1021a.dtsi" |
| 18 |
|
| 19 |
/ { |
| 20 |
model = "TQMLS102xA SOM on MBLS102xA"; |
| 21 |
compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; |
| 22 |
|
| 23 |
audio_mclk: audio-clock { |
| 24 |
compatible = "fixed-clock"; |
| 25 |
#clock-cells = <0>; |
| 26 |
clock-frequency = <25000000>; |
| 27 |
}; |
| 28 |
|
| 29 |
backlight_dcu: backlight { |
| 30 |
compatible = "gpio-backlight"; |
| 31 |
gpios = <&pca9530 0 GPIO_ACTIVE_LOW>; |
| 32 |
status = "disabled"; |
| 33 |
}; |
| 34 |
|
| 35 |
gpio-keys { |
| 36 |
compatible = "gpio-keys"; |
| 37 |
autorepeat; |
| 38 |
|
| 39 |
switch-1 { |
| 40 |
label = "S6"; |
| 41 |
linux,code = <BTN_0>; |
| 42 |
gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>; |
| 43 |
}; |
| 44 |
|
| 45 |
btn2: switch-2 { |
| 46 |
label = "S7"; |
| 47 |
linux,code = <BTN_1>; |
| 48 |
gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>; |
| 49 |
}; |
| 50 |
|
| 51 |
switch-3 { |
| 52 |
label = "S8"; |
| 53 |
linux,code = <BTN_2>; |
| 54 |
gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
gpio_leds: gpio-leds { |
| 59 |
compatible = "gpio-leds"; |
| 60 |
|
| 61 |
led-0 { |
| 62 |
color = <LED_COLOR_ID_GREEN>; |
| 63 |
function = LED_FUNCTION_STATUS; |
| 64 |
function-enumerator = <0>; |
| 65 |
gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>; |
| 66 |
linux,default-trigger = "default-on"; |
| 67 |
}; |
| 68 |
|
| 69 |
led-1 { |
| 70 |
color = <LED_COLOR_ID_GREEN>; |
| 71 |
function = LED_FUNCTION_STATUS; |
| 72 |
function-enumerator = <1>; |
| 73 |
gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>; |
| 74 |
linux,default-trigger = "default-on"; |
| 75 |
}; |
| 76 |
|
| 77 |
led-2 { |
| 78 |
color = <LED_COLOR_ID_GREEN>; |
| 79 |
function = LED_FUNCTION_STATUS; |
| 80 |
function-enumerator = <2>; |
| 81 |
gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>; |
| 82 |
linux,default-trigger = "default-on"; |
| 83 |
}; |
| 84 |
|
| 85 |
led-3 { |
| 86 |
color = <LED_COLOR_ID_GREEN>; |
| 87 |
function = LED_FUNCTION_HEARTBEAT; |
| 88 |
function-enumerator = <0>; |
| 89 |
gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>; |
| 90 |
linux,default-trigger = "heartbeat"; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
lvds_encoder: lvds-encoder { |
| 95 |
compatible = "ti,sn75lvds83", "lvds-encoder"; |
| 96 |
power-supply = <®_3p3v>; |
| 97 |
status = "disabled"; |
| 98 |
|
| 99 |
ports { |
| 100 |
#address-cells = <1>; |
| 101 |
#size-cells = <0>; |
| 102 |
|
| 103 |
port@0 { |
| 104 |
reg = <0>; |
| 105 |
|
| 106 |
lvds_encoder_in: endpoint {}; |
| 107 |
}; |
| 108 |
|
| 109 |
port@1 { |
| 110 |
reg = <1>; |
| 111 |
|
| 112 |
lvds_encoder_out: endpoint {}; |
| 113 |
}; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
reg_1p2v: regulator-1p2v { |
| 118 |
compatible = "regulator-fixed"; |
| 119 |
regulator-name = "1P2V"; |
| 120 |
regulator-min-microvolt = <1200000>; |
| 121 |
regulator-max-microvolt = <1200000>; |
| 122 |
regulator-always-on; |
| 123 |
vin-supply = <®_3p3v>; |
| 124 |
}; |
| 125 |
|
| 126 |
reg_3p3v: regulator-3p3v { |
| 127 |
compatible = "regulator-fixed"; |
| 128 |
regulator-name = "3P3V"; |
| 129 |
regulator-min-microvolt = <3300000>; |
| 130 |
regulator-max-microvolt = <3300000>; |
| 131 |
regulator-always-on; |
| 132 |
}; |
| 133 |
|
| 134 |
hdmi_out: hdmi { |
| 135 |
compatible = "hdmi-connector"; |
| 136 |
type = "a"; |
| 137 |
ddc-i2c-bus = <&i2c0>; |
| 138 |
status = "disabled"; |
| 139 |
|
| 140 |
port { |
| 141 |
hdmi_in: endpoint { |
| 142 |
remote-endpoint = <&sii9022a_out>; |
| 143 |
}; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
display: panel { |
| 148 |
backlight = <&backlight_dcu>; |
| 149 |
enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>; |
| 150 |
power-supply = <®_3p3v>; |
| 151 |
status = "disabled"; |
| 152 |
|
| 153 |
port { |
| 154 |
panel_in: endpoint {}; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
sound { |
| 159 |
compatible = "fsl,imx-audio-tlv320aic32x4"; |
| 160 |
model = "tqm-tlv320aic32"; |
| 161 |
ssi-controller = <&sai1>; |
| 162 |
audio-codec = <&tlv320aic32x4>; |
| 163 |
}; |
| 164 |
|
| 165 |
}; |
| 166 |
|
| 167 |
&can0 { |
| 168 |
xceiver-supply = <®_3p3v>; |
| 169 |
status = "okay"; |
| 170 |
}; |
| 171 |
|
| 172 |
&can1 { |
| 173 |
xceiver-supply = <®_3p3v>; |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&dspi0 { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&enet0 { |
| 182 |
phy-handle = <&rgmii_phy0c>; |
| 183 |
phy-mode = "rgmii-id"; |
| 184 |
mac-address = [ 00 00 00 00 00 00 ]; |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&enet1 { |
| 189 |
tbi-handle = <&tbi1>; |
| 190 |
phy-handle = <&sgmii_phy03>; |
| 191 |
phy-mode = "sgmii"; |
| 192 |
mac-address = [ 00 00 00 00 00 00 ]; |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
&enet2 { |
| 197 |
phy-handle = <&rgmii_phy04>; |
| 198 |
phy-mode = "rgmii-id"; |
| 199 |
mac-address = [ 00 00 00 00 00 00 ]; |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&i2c0 { |
| 204 |
status = "okay"; |
| 205 |
|
| 206 |
tlv320aic32x4: audio-codec@18 { |
| 207 |
compatible = "ti,tlv320aic32x4"; |
| 208 |
reg = <0x18>; |
| 209 |
clocks = <&audio_mclk>; |
| 210 |
clock-names = "mclk"; |
| 211 |
ldoin-supply = <®_3p3v>; |
| 212 |
iov-supply = <®_3p3v>; |
| 213 |
}; |
| 214 |
|
| 215 |
pca9554_0: gpio-expander@20 { |
| 216 |
compatible = "nxp,pca9554"; |
| 217 |
reg = <0x20>; |
| 218 |
gpio-controller; |
| 219 |
#gpio-cells = <2>; |
| 220 |
interrupt-parent = <&gpio0>; |
| 221 |
interrupts = <24 IRQ_TYPE_EDGE_FALLING>; |
| 222 |
interrupt-controller; |
| 223 |
#interrupt-cells = <2>; |
| 224 |
vcc-supply = <®_3p3v>; |
| 225 |
gpio-line-names = "BUTTON0", "BUTTON1", |
| 226 |
"BUTTON2", "EMMC_SEL", |
| 227 |
"DIP2", "DIP3", |
| 228 |
"EXT_TOUCH_INT", "GPIO_1"; |
| 229 |
}; |
| 230 |
|
| 231 |
pca9554_1: gpio-expander@21 { |
| 232 |
compatible = "nxp,pca9554"; |
| 233 |
reg = <0x21>; |
| 234 |
gpio-controller; |
| 235 |
#gpio-cells = <2>; |
| 236 |
interrupt-parent = <&gpio0>; |
| 237 |
interrupts = <25 IRQ_TYPE_EDGE_FALLING>; |
| 238 |
interrupt-controller; |
| 239 |
#interrupt-cells = <2>; |
| 240 |
vcc-supply = <®_3p3v>; |
| 241 |
gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#", |
| 242 |
"MPCIE_WAKE#", "LCD_BLT_EN", |
| 243 |
"LCD_PWR_EN", "EC1_PHY_PWDN", |
| 244 |
"EC3_PHY_PWDN", "SGMII_PHY_PWDN"; |
| 245 |
}; |
| 246 |
|
| 247 |
pca9554_2: gpio-expander@22 { |
| 248 |
compatible = "nxp,pca9554"; |
| 249 |
reg = <0x22>; |
| 250 |
gpio-controller; |
| 251 |
#gpio-cells = <2>; |
| 252 |
interrupt-parent = <&extirq>; |
| 253 |
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; |
| 254 |
interrupt-controller; |
| 255 |
#interrupt-cells = <2>; |
| 256 |
vcc-supply = <®_3p3v>; |
| 257 |
gpio-line-names = "MUX_SEL0", "MUX_SEL1", |
| 258 |
"MUX_SEL2", "MUX_SEL3", |
| 259 |
"V95", "V96", "V97", "V98"; |
| 260 |
}; |
| 261 |
|
| 262 |
sii9022a: hdmi-transmitter@3b { |
| 263 |
compatible = "sil,sii9022"; |
| 264 |
reg = <0x3b>; |
| 265 |
iovcc-supply = <®_3p3v>; |
| 266 |
cvcc12-supply = <®_1p2v>; |
| 267 |
interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; |
| 268 |
#sound-dai-cells = <0>; |
| 269 |
sil,i2s-data-lanes = <0>; |
| 270 |
status = "disabled"; |
| 271 |
|
| 272 |
ports { |
| 273 |
#address-cells = <1>; |
| 274 |
#size-cells = <0>; |
| 275 |
|
| 276 |
port@0 { |
| 277 |
reg = <0>; |
| 278 |
|
| 279 |
sii9022a_in: endpoint {}; |
| 280 |
}; |
| 281 |
|
| 282 |
port@1 { |
| 283 |
reg = <1>; |
| 284 |
|
| 285 |
sii9022a_out: endpoint { |
| 286 |
remote-endpoint = <&hdmi_in>; |
| 287 |
}; |
| 288 |
}; |
| 289 |
}; |
| 290 |
}; |
| 291 |
|
| 292 |
stmpe811: port-expander@41 { |
| 293 |
compatible = "st,stmpe811"; |
| 294 |
reg = <0x41>; |
| 295 |
interrupt-parent = <&gpio0>; |
| 296 |
interrupts = <23 IRQ_TYPE_EDGE_FALLING>; |
| 297 |
vcc-supply = <®_3p3v>; |
| 298 |
vio-supply = <®_3p3v>; |
| 299 |
|
| 300 |
gpio { |
| 301 |
compatible = "st,stmpe-gpio"; |
| 302 |
gpio-controller; |
| 303 |
#gpio-cells = <2>; |
| 304 |
interrupt-controller; |
| 305 |
#interrupt-cells = <2>; |
| 306 |
/* GPIO 5-7 used for touch */ |
| 307 |
st,norequest-mask = <0xf0>; |
| 308 |
gpio-line-names = "GPIO_ADC_I2C1_1", |
| 309 |
"GPIO_ADC_I2C1_2", |
| 310 |
"GPIO_ADC_I2C1_3", |
| 311 |
"GPIO_ADC_I2C1_4"; |
| 312 |
}; |
| 313 |
|
| 314 |
touchscreen { |
| 315 |
compatible = "st,stmpe-ts"; |
| 316 |
status = "disabled"; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
pca9530: leds@60 { |
| 321 |
compatible = "nxp,pca9530"; |
| 322 |
reg = <0x60>; |
| 323 |
gpio-controller; |
| 324 |
#gpio-cells = <2>; |
| 325 |
gpio-line-names = "PWM_0", "PWM_1"; |
| 326 |
|
| 327 |
led-0 { |
| 328 |
type = <PCA9532_TYPE_GPIO>; |
| 329 |
}; |
| 330 |
|
| 331 |
led-1 { |
| 332 |
type = <PCA9532_TYPE_GPIO>; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
}; |
| 337 |
|
| 338 |
&i2c1 { |
| 339 |
status = "okay"; |
| 340 |
}; |
| 341 |
|
| 342 |
&lpuart0 { |
| 343 |
linux,rs485-enabled-at-boot-time; |
| 344 |
status = "okay"; |
| 345 |
}; |
| 346 |
|
| 347 |
&mdio0 { |
| 348 |
sgmii_phy03: ethernet-phy@3 { |
| 349 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 350 |
reg = <0x03>; |
| 351 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 352 |
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| 353 |
ti,dp83867-rxctrl-strap-quirk; |
| 354 |
}; |
| 355 |
|
| 356 |
rgmii_phy04: ethernet-phy@4 { |
| 357 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 358 |
reg = <0x04>; |
| 359 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; |
| 360 |
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 361 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 362 |
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| 363 |
}; |
| 364 |
|
| 365 |
rgmii_phy0c: ethernet-phy@c { |
| 366 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 367 |
reg = <0x0c>; |
| 368 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; |
| 369 |
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 370 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 371 |
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| 372 |
}; |
| 373 |
}; |
| 374 |
|
| 375 |
&pwm6 { |
| 376 |
status = "okay"; |
| 377 |
}; |
| 378 |
|
| 379 |
&pwm7 { |
| 380 |
status = "okay"; |
| 381 |
}; |
| 382 |
|
| 383 |
&sai1 { |
| 384 |
status = "okay"; |
| 385 |
}; |
| 386 |
|
| 387 |
&sata { |
| 388 |
status = "okay"; |
| 389 |
}; |
| 390 |
|
| 391 |
&uart0 { |
| 392 |
status = "okay"; |
| 393 |
}; |
| 394 |
|
| 395 |
&uart1 { |
| 396 |
status = "okay"; |
| 397 |
}; |
| 398 |
|
| 399 |
&usb3 { |
| 400 |
/* |
| 401 |
* Although DR connector, VBUS is always driven, so |
| 402 |
* restrict to host mode. |
| 403 |
*/ |
| 404 |
dr_mode = "host"; |
| 405 |
status = "okay"; |
| 406 |
}; |