| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/ |
| 4 |
* |
| 5 |
* Author: Harry YJ Jhou (周亞諄) <[email protected]> |
| 6 |
* Jimmy Chen (陳永達) <[email protected]> |
| 7 |
* SZ Lin (林上智) <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
|
| 12 |
#include <dt-bindings/gpio/gpio.h> |
| 13 |
#include <dt-bindings/input/input.h> |
| 14 |
#include "ls1021a.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Moxa UC-8410A"; |
| 18 |
compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
enet0_rgmii_phy = &rgmii_phy0; |
| 22 |
enet1_rgmii_phy = &rgmii_phy1; |
| 23 |
enet2_rgmii_phy = &rgmii_phy2; |
| 24 |
}; |
| 25 |
|
| 26 |
sys_mclk: clock-mclk { |
| 27 |
compatible = "fixed-clock"; |
| 28 |
#clock-cells = <0>; |
| 29 |
clock-frequency = <24576000>; |
| 30 |
}; |
| 31 |
|
| 32 |
reg_3p3v: regulator-3p3v { |
| 33 |
compatible = "regulator-fixed"; |
| 34 |
regulator-name = "3P3V"; |
| 35 |
regulator-min-microvolt = <3300000>; |
| 36 |
regulator-max-microvolt = <3300000>; |
| 37 |
regulator-always-on; |
| 38 |
}; |
| 39 |
|
| 40 |
leds { |
| 41 |
compatible = "gpio-leds"; |
| 42 |
|
| 43 |
cel-pwr { |
| 44 |
label = "UC8410A:CEL-PWR"; |
| 45 |
gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; |
| 46 |
default-state = "off"; |
| 47 |
}; |
| 48 |
|
| 49 |
cel-reset { |
| 50 |
label = "UC8410A:CEL-RESET"; |
| 51 |
gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; |
| 52 |
default-state = "off"; |
| 53 |
}; |
| 54 |
|
| 55 |
str-led { |
| 56 |
label = "UC8410A:RED:PROG"; |
| 57 |
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; |
| 58 |
linux,default-trigger = "mmc0"; |
| 59 |
}; |
| 60 |
|
| 61 |
sw-ready { |
| 62 |
label = "UC8410A:GREEN:SWRDY"; |
| 63 |
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
| 64 |
default-state = "on"; |
| 65 |
}; |
| 66 |
|
| 67 |
beeper { |
| 68 |
label = "UC8410A:BEEP"; |
| 69 |
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; |
| 70 |
default-state = "off"; |
| 71 |
}; |
| 72 |
|
| 73 |
prog-led0 { |
| 74 |
label = "UC8410A:GREEN:PROG2"; |
| 75 |
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; |
| 76 |
default-state = "off"; |
| 77 |
}; |
| 78 |
|
| 79 |
prog-led1 { |
| 80 |
label = "UC8410A:GREEN:PROG1"; |
| 81 |
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; |
| 82 |
default-state = "off"; |
| 83 |
}; |
| 84 |
|
| 85 |
prog-led2 { |
| 86 |
label = "UC8410A:GREEN:PROG0"; |
| 87 |
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; |
| 88 |
default-state = "off"; |
| 89 |
}; |
| 90 |
|
| 91 |
wifi-signal0 { |
| 92 |
label = "UC8410A:GREEN:CEL2"; |
| 93 |
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; |
| 94 |
default-state = "off"; |
| 95 |
}; |
| 96 |
|
| 97 |
wifi-signal1 { |
| 98 |
label = "UC8410A:GREEN:CEL1"; |
| 99 |
gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; |
| 100 |
default-state = "off"; |
| 101 |
}; |
| 102 |
|
| 103 |
wifi-signal2 { |
| 104 |
label = "UC8410A:GREEN:CEL0"; |
| 105 |
gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; |
| 106 |
default-state = "off"; |
| 107 |
}; |
| 108 |
|
| 109 |
cpu-diag-red { |
| 110 |
label = "UC8410A:RED:DIA"; |
| 111 |
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| 112 |
default-state = "off"; |
| 113 |
}; |
| 114 |
|
| 115 |
cpu-diag-green { |
| 116 |
label = "UC8410A:GREEN:DIA"; |
| 117 |
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; |
| 118 |
default-state = "off"; |
| 119 |
}; |
| 120 |
|
| 121 |
cpu-diag-yellow { |
| 122 |
label = "UC8410A:YELLOW:DIA"; |
| 123 |
gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 124 |
default-state = "off"; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
gpio-keys { |
| 129 |
compatible = "gpio-keys"; |
| 130 |
|
| 131 |
pushbtn-key { |
| 132 |
label = "push button key"; |
| 133 |
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; |
| 134 |
linux,code = <BTN_MISC>; |
| 135 |
default-state = "on"; |
| 136 |
}; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
&enet0 { |
| 141 |
phy-handle = <&rgmii_phy0>; |
| 142 |
phy-connection-type = "rgmii-id"; |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&enet1 { |
| 147 |
phy-handle = <&rgmii_phy1>; |
| 148 |
phy-connection-type = "rgmii-id"; |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&enet2 { |
| 153 |
phy-handle = <&rgmii_phy2>; |
| 154 |
phy-connection-type = "rgmii-id"; |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&i2c0 { |
| 159 |
clock-frequency = <100000>; |
| 160 |
status = "okay"; |
| 161 |
|
| 162 |
tpm@20 { |
| 163 |
compatible = "infineon,slb9635tt"; |
| 164 |
reg = <0x20>; |
| 165 |
}; |
| 166 |
|
| 167 |
rtc@68 { |
| 168 |
compatible = "dallas,ds1374"; |
| 169 |
reg = <0x68>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&lpuart0 { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&mdio0 { |
| 178 |
rgmii_phy0: ethernet-phy@0 { |
| 179 |
compatible = "marvell,88e1118"; |
| 180 |
reg = <0x0>; |
| 181 |
marvell,reg-init = |
| 182 |
<3 0x11 0 0x4415>, /* Reg 3,17 */ |
| 183 |
<3 0x10 0 0x77>; /* Reg 3,16 */ |
| 184 |
}; |
| 185 |
|
| 186 |
rgmii_phy1: ethernet-phy@1 { |
| 187 |
compatible = "marvell,88e1118"; |
| 188 |
reg = <0x1>; |
| 189 |
marvell,reg-init = |
| 190 |
<3 0x11 0 0x4415>, /* Reg 3,17 */ |
| 191 |
<3 0x10 0 0x77>; /* Reg 3,16 */ |
| 192 |
}; |
| 193 |
|
| 194 |
rgmii_phy2: ethernet-phy@2 { |
| 195 |
compatible = "marvell,88e1118"; |
| 196 |
reg = <0x2>; |
| 197 |
marvell,reg-init = |
| 198 |
<3 0x11 0 0x4415>, /* Reg 3,17 */ |
| 199 |
<3 0x10 0 0x77>; /* Reg 3,16 */ |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
&qspi { |
| 204 |
status = "okay"; |
| 205 |
|
| 206 |
flash: flash@0 { |
| 207 |
compatible = "spansion,s25fl064l", "spansion,s25fl164k"; |
| 208 |
#address-cells = <1>; |
| 209 |
#size-cells = <1>; |
| 210 |
spi-max-frequency = <20000000>; |
| 211 |
spi-rx-bus-width = <4>; |
| 212 |
spi-tx-bus-width = <4>; |
| 213 |
reg = <0>; |
| 214 |
|
| 215 |
partitions@0 { |
| 216 |
label = "U-Boot"; |
| 217 |
reg = <0x0 0x180000>; |
| 218 |
}; |
| 219 |
|
| 220 |
partitions@180000 { |
| 221 |
label = "U-Boot Env"; |
| 222 |
reg = <0x180000 0x680000>; |
| 223 |
}; |
| 224 |
}; |
| 225 |
}; |
| 226 |
|
| 227 |
&sata { |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&uart0 { |
| 232 |
status = "okay"; |
| 233 |
}; |
| 234 |
|
| 235 |
&uart1 { |
| 236 |
status = "okay"; |
| 237 |
}; |