| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Copyright 2021-2022 NXP |
| 4 |
* |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include "ls1021a.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "LS1021A-IOT Board"; |
| 12 |
compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; |
| 13 |
|
| 14 |
sys_mclk: clock-mclk { |
| 15 |
compatible = "fixed-clock"; |
| 16 |
#clock-cells = <0>; |
| 17 |
clock-frequency = <24576000>; |
| 18 |
}; |
| 19 |
|
| 20 |
reg_3p3v: regulator-3V3 { |
| 21 |
compatible = "regulator-fixed"; |
| 22 |
regulator-name = "3P3V"; |
| 23 |
regulator-min-microvolt = <3300000>; |
| 24 |
regulator-max-microvolt = <3300000>; |
| 25 |
regulator-always-on; |
| 26 |
}; |
| 27 |
|
| 28 |
reg_2p5v: regulator-2V5 { |
| 29 |
compatible = "regulator-fixed"; |
| 30 |
regulator-name = "2P5V"; |
| 31 |
regulator-min-microvolt = <2500000>; |
| 32 |
regulator-max-microvolt = <2500000>; |
| 33 |
regulator-always-on; |
| 34 |
}; |
| 35 |
|
| 36 |
sound { |
| 37 |
compatible = "simple-audio-card"; |
| 38 |
simple-audio-card,format = "i2s"; |
| 39 |
simple-audio-card,widgets = |
| 40 |
"Microphone", "Microphone Jack", |
| 41 |
"Headphone", "Headphone Jack", |
| 42 |
"Speaker", "Speaker Ext", |
| 43 |
"Line", "Line In Jack"; |
| 44 |
simple-audio-card,routing = |
| 45 |
"MIC_IN", "Microphone Jack", |
| 46 |
"Microphone Jack", "Mic Bias", |
| 47 |
"LINE_IN", "Line In Jack", |
| 48 |
"Headphone Jack", "HP_OUT", |
| 49 |
"Speaker Ext", "LINE_OUT"; |
| 50 |
|
| 51 |
simple-audio-card,cpu { |
| 52 |
sound-dai = <&sai2>; |
| 53 |
frame-master; |
| 54 |
bitclock-master; |
| 55 |
}; |
| 56 |
|
| 57 |
simple-audio-card,codec { |
| 58 |
sound-dai = <&sgtl5000>; |
| 59 |
frame-master; |
| 60 |
bitclock-master; |
| 61 |
}; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
&can0 { |
| 66 |
status = "disabled"; |
| 67 |
}; |
| 68 |
|
| 69 |
&can1 { |
| 70 |
status = "disabled"; |
| 71 |
}; |
| 72 |
|
| 73 |
&can2 { |
| 74 |
status = "disabled"; |
| 75 |
}; |
| 76 |
|
| 77 |
&can3 { |
| 78 |
status = "okay"; |
| 79 |
}; |
| 80 |
|
| 81 |
&dcu { |
| 82 |
display = <&display>; |
| 83 |
status = "okay"; |
| 84 |
|
| 85 |
display: display@0 { |
| 86 |
bits-per-pixel = <24>; |
| 87 |
|
| 88 |
display-timings { |
| 89 |
native-mode = <&timing0>; |
| 90 |
|
| 91 |
timing0: mode0 { |
| 92 |
clock-frequency = <25000000>; |
| 93 |
hactive = <640>; |
| 94 |
vactive = <480>; |
| 95 |
hback-porch = <80>; |
| 96 |
hfront-porch = <80>; |
| 97 |
vback-porch = <16>; |
| 98 |
vfront-porch = <16>; |
| 99 |
hsync-len = <12>; |
| 100 |
vsync-len = <2>; |
| 101 |
hsync-active = <1>; |
| 102 |
vsync-active = <1>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
&enet0 { |
| 109 |
tbi-handle = <&tbi1>; |
| 110 |
phy-handle = <&phy1>; |
| 111 |
phy-connection-type = "sgmii"; |
| 112 |
status = "okay"; |
| 113 |
}; |
| 114 |
|
| 115 |
&enet1 { |
| 116 |
tbi-handle = <&tbi1>; |
| 117 |
phy-handle = <&phy3>; |
| 118 |
phy-connection-type = "sgmii"; |
| 119 |
status = "okay"; |
| 120 |
}; |
| 121 |
|
| 122 |
&enet2 { |
| 123 |
fixed-link = <0 1 1000 0 0>; |
| 124 |
phy-connection-type = "rgmii-id"; |
| 125 |
status = "okay"; |
| 126 |
}; |
| 127 |
|
| 128 |
&esdhc { |
| 129 |
status = "okay"; |
| 130 |
}; |
| 131 |
|
| 132 |
&i2c0 { |
| 133 |
status = "okay"; |
| 134 |
|
| 135 |
pca9555: gpio@23 { |
| 136 |
compatible = "nxp,pca9555"; |
| 137 |
reg = <0x23>; |
| 138 |
gpio-controller; |
| 139 |
#gpio-cells = <2>; |
| 140 |
interrupt-controller; |
| 141 |
#interrupt-cells = <2>; |
| 142 |
}; |
| 143 |
|
| 144 |
sgtl5000: audio-codec@2a { |
| 145 |
#sound-dai-cells = <0x0>; |
| 146 |
compatible = "fsl,sgtl5000"; |
| 147 |
reg = <0x2a>; |
| 148 |
VDDA-supply = <®_3p3v>; |
| 149 |
VDDIO-supply = <®_2p5v>; |
| 150 |
clocks = <&sys_mclk>; |
| 151 |
}; |
| 152 |
|
| 153 |
max1239: adc@35 { |
| 154 |
compatible = "maxim,max1239"; |
| 155 |
reg = <0x35>; |
| 156 |
#io-channel-cells = <1>; |
| 157 |
}; |
| 158 |
|
| 159 |
ina2201: core-monitor@44 { |
| 160 |
compatible = "ti,ina220"; |
| 161 |
reg = <0x44>; |
| 162 |
shunt-resistor = <1000>; |
| 163 |
}; |
| 164 |
|
| 165 |
ina2202: current-monitor@45 { |
| 166 |
compatible = "ti,ina220"; |
| 167 |
reg = <0x45>; |
| 168 |
shunt-resistor = <1000>; |
| 169 |
}; |
| 170 |
|
| 171 |
lm75b: thermal-monitor@48 { |
| 172 |
compatible = "national,lm75b"; |
| 173 |
reg = <0x48>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&lpuart0 { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&mdio0 { |
| 182 |
phy0: ethernet-phy@0 { |
| 183 |
reg = <0x0>; |
| 184 |
}; |
| 185 |
|
| 186 |
phy1: ethernet-phy@1 { |
| 187 |
reg = <0x1>; |
| 188 |
}; |
| 189 |
|
| 190 |
phy2: ethernet-phy@2 { |
| 191 |
reg = <0x2>; |
| 192 |
}; |
| 193 |
|
| 194 |
phy3: ethernet-phy@3 { |
| 195 |
reg = <0x3>; |
| 196 |
}; |
| 197 |
|
| 198 |
tbi1: tbi-phy@1f { |
| 199 |
reg = <0x1f>; |
| 200 |
device_type = "tbi-phy"; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
&qspi { |
| 205 |
num-cs = <2>; |
| 206 |
status = "okay"; |
| 207 |
|
| 208 |
s25fl128s: flash@0 { |
| 209 |
compatible = "jedec,spi-nor"; |
| 210 |
#address-cells = <1>; |
| 211 |
#size-cells = <1>; |
| 212 |
spi-max-frequency = <20000000>; |
| 213 |
reg = <0>; |
| 214 |
}; |
| 215 |
}; |
| 216 |
|
| 217 |
&sai2 { |
| 218 |
status = "okay"; |
| 219 |
}; |
| 220 |
|
| 221 |
&uart0 { |
| 222 |
status = "okay"; |
| 223 |
}; |
| 224 |
|
| 225 |
&uart1 { |
| 226 |
status = "okay"; |
| 227 |
}; |