| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2018 Oleg Ivanov <[email protected]> |
| 4 |
* Copyright (c) 2018 Martin Blumenstingl <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "meson8m2.dtsi" |
| 10 |
|
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
|
| 14 |
/ { |
| 15 |
model = "Tronsmart MXIII Plus"; |
| 16 |
compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2"; |
| 17 |
|
| 18 |
aliases { |
| 19 |
ethernet0 = ðmac; |
| 20 |
i2c0 = &i2c_AO; |
| 21 |
serial0 = &uart_AO; |
| 22 |
mmc0 = &sd_card_slot; |
| 23 |
}; |
| 24 |
|
| 25 |
chosen { |
| 26 |
stdout-path = "serial0:115200n8"; |
| 27 |
}; |
| 28 |
|
| 29 |
memory@40000000 { |
| 30 |
device_type = "memory"; |
| 31 |
reg = <0x40000000 0x80000000>; |
| 32 |
}; |
| 33 |
|
| 34 |
adc-keys { |
| 35 |
compatible = "adc-keys"; |
| 36 |
io-channels = <&saradc 0>; |
| 37 |
io-channel-names = "buttons"; |
| 38 |
keyup-threshold-microvolt = <1710000>; |
| 39 |
|
| 40 |
button-function { |
| 41 |
label = "Function"; |
| 42 |
linux,code = <KEY_FN>; |
| 43 |
press-threshold-microvolt = <10000>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
sdio_pwrseq: sdio-pwrseq { |
| 48 |
compatible = "mmc-pwrseq-simple"; |
| 49 |
|
| 50 |
pinctrl-0 = <&xtal_32k_out_pins>; |
| 51 |
pinctrl-names = "default"; |
| 52 |
|
| 53 |
reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, |
| 54 |
<&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; |
| 55 |
|
| 56 |
clocks = <&xtal_32k_out>; |
| 57 |
clock-names = "ext_clock"; |
| 58 |
}; |
| 59 |
|
| 60 |
vcc_3v3: regulator-vcc3v3 { |
| 61 |
compatible = "regulator-fixed"; |
| 62 |
regulator-name = "VCC3V3"; |
| 63 |
regulator-min-microvolt = <3300000>; |
| 64 |
regulator-max-microvolt = <3300000>; |
| 65 |
}; |
| 66 |
|
| 67 |
xtal_32k_out: xtal-32k-out-clk { |
| 68 |
compatible = "fixed-clock"; |
| 69 |
#clock-cells = <0>; |
| 70 |
clock-frequency = <32768>; |
| 71 |
clock-output-names = "xtal_32k_out"; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
&cpu0 { |
| 76 |
cpu-supply = <&vcck>; |
| 77 |
}; |
| 78 |
|
| 79 |
ðmac { |
| 80 |
status = "okay"; |
| 81 |
|
| 82 |
pinctrl-0 = <ð_rgmii_pins>; |
| 83 |
pinctrl-names = "default"; |
| 84 |
|
| 85 |
phy-handle = <ð_phy0>; |
| 86 |
phy-mode = "rgmii-id"; |
| 87 |
|
| 88 |
mdio { |
| 89 |
compatible = "snps,dwmac-mdio"; |
| 90 |
#address-cells = <1>; |
| 91 |
#size-cells = <0>; |
| 92 |
|
| 93 |
eth_phy0: ethernet-phy@0 { |
| 94 |
/* Realtek RTL8211F (0x001cc916) */ |
| 95 |
reg = <0>; |
| 96 |
|
| 97 |
reset-assert-us = <10000>; |
| 98 |
reset-deassert-us = <80000>; |
| 99 |
reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
&ir_receiver { |
| 105 |
status = "okay"; |
| 106 |
pinctrl-0 = <&ir_recv_pins>; |
| 107 |
pinctrl-names = "default"; |
| 108 |
}; |
| 109 |
|
| 110 |
&i2c_AO { |
| 111 |
status = "okay"; |
| 112 |
pinctrl-0 = <&i2c_ao_pins>; |
| 113 |
pinctrl-names = "default"; |
| 114 |
|
| 115 |
pmic@32 { |
| 116 |
compatible = "ricoh,rn5t618"; |
| 117 |
reg = <0x32>; |
| 118 |
system-power-controller; |
| 119 |
|
| 120 |
regulators { |
| 121 |
vcck: DCDC1 { |
| 122 |
regulator-name = "VCCK"; |
| 123 |
regulator-min-microvolt = <825000>; |
| 124 |
regulator-max-microvolt = <1150000>; |
| 125 |
regulator-boot-on; |
| 126 |
regulator-always-on; |
| 127 |
}; |
| 128 |
|
| 129 |
vddee: DCDC2 { |
| 130 |
/* the output is also used as VDDAO */ |
| 131 |
regulator-name = "VDD_EE"; |
| 132 |
regulator-min-microvolt = <950000>; |
| 133 |
regulator-max-microvolt = <1150000>; |
| 134 |
regulator-boot-on; |
| 135 |
regulator-always-on; |
| 136 |
}; |
| 137 |
|
| 138 |
DCDC3 { |
| 139 |
regulator-name = "VDD_DDR"; |
| 140 |
regulator-min-microvolt = <1500000>; |
| 141 |
regulator-max-microvolt = <1500000>; |
| 142 |
regulator-boot-on; |
| 143 |
regulator-always-on; |
| 144 |
}; |
| 145 |
|
| 146 |
LDO1 { |
| 147 |
regulator-name = "VDDIO_AO28"; |
| 148 |
regulator-min-microvolt = <2900000>; |
| 149 |
regulator-max-microvolt = <2900000>; |
| 150 |
regulator-boot-on; |
| 151 |
regulator-always-on; |
| 152 |
}; |
| 153 |
|
| 154 |
vddio_ao1v8: LDO2 { |
| 155 |
regulator-name = "VDDIO_AO18"; |
| 156 |
regulator-min-microvolt = <1800000>; |
| 157 |
regulator-max-microvolt = <1800000>; |
| 158 |
regulator-boot-on; |
| 159 |
regulator-always-on; |
| 160 |
}; |
| 161 |
|
| 162 |
LDO3 { |
| 163 |
regulator-name = "VCC1V8"; |
| 164 |
regulator-min-microvolt = <1800000>; |
| 165 |
regulator-max-microvolt = <1800000>; |
| 166 |
regulator-boot-on; |
| 167 |
regulator-always-on; |
| 168 |
}; |
| 169 |
|
| 170 |
LDO4 { |
| 171 |
regulator-name = "VCC2V8"; |
| 172 |
regulator-min-microvolt = <2850000>; |
| 173 |
regulator-max-microvolt = <2850000>; |
| 174 |
regulator-boot-on; |
| 175 |
regulator-always-on; |
| 176 |
}; |
| 177 |
|
| 178 |
LDO5 { |
| 179 |
regulator-name = "AVDD1V8"; |
| 180 |
regulator-min-microvolt = <1800000>; |
| 181 |
regulator-max-microvolt = <1800000>; |
| 182 |
regulator-boot-on; |
| 183 |
regulator-always-on; |
| 184 |
}; |
| 185 |
|
| 186 |
LDORTC1 { |
| 187 |
regulator-name = "VDD_LDO"; |
| 188 |
regulator-min-microvolt = <2700000>; |
| 189 |
regulator-max-microvolt = <2700000>; |
| 190 |
regulator-boot-on; |
| 191 |
regulator-always-on; |
| 192 |
}; |
| 193 |
|
| 194 |
LDORTC2 { |
| 195 |
regulator-name = "RTC_0V9"; |
| 196 |
regulator-min-microvolt = <900000>; |
| 197 |
regulator-max-microvolt = <900000>; |
| 198 |
regulator-boot-on; |
| 199 |
regulator-always-on; |
| 200 |
}; |
| 201 |
}; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
&mali { |
| 206 |
mali-supply = <&vddee>; |
| 207 |
}; |
| 208 |
|
| 209 |
&saradc { |
| 210 |
status = "okay"; |
| 211 |
vref-supply = <&vddio_ao1v8>; |
| 212 |
}; |
| 213 |
|
| 214 |
/* SDIO wifi */ |
| 215 |
&sdhc { |
| 216 |
status = "okay"; |
| 217 |
|
| 218 |
pinctrl-0 = <&sdxc_a_pins>; |
| 219 |
pinctrl-names = "default"; |
| 220 |
|
| 221 |
bus-width = <4>; |
| 222 |
max-frequency = <50000000>; |
| 223 |
|
| 224 |
disable-wp; |
| 225 |
non-removable; |
| 226 |
cap-mmc-highspeed; |
| 227 |
cap-sd-highspeed; |
| 228 |
|
| 229 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 230 |
|
| 231 |
vmmc-supply = <&vcc_3v3>; |
| 232 |
vqmmc-supply = <&vcc_3v3>; |
| 233 |
}; |
| 234 |
|
| 235 |
&sdio { |
| 236 |
status = "okay"; |
| 237 |
|
| 238 |
pinctrl-0 = <&sd_b_pins>; |
| 239 |
pinctrl-names = "default"; |
| 240 |
|
| 241 |
/* SD card */ |
| 242 |
sd_card_slot: slot@1 { |
| 243 |
compatible = "mmc-slot"; |
| 244 |
reg = <1>; |
| 245 |
status = "okay"; |
| 246 |
|
| 247 |
bus-width = <4>; |
| 248 |
no-sdio; |
| 249 |
cap-mmc-highspeed; |
| 250 |
cap-sd-highspeed; |
| 251 |
disable-wp; |
| 252 |
|
| 253 |
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; |
| 254 |
|
| 255 |
vmmc-supply = <&vcc_3v3>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
/* connected to the Bluetooth module */ |
| 260 |
&uart_A { |
| 261 |
status = "okay"; |
| 262 |
pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; |
| 263 |
pinctrl-names = "default"; |
| 264 |
uart-has-rtscts; |
| 265 |
|
| 266 |
bluetooth { |
| 267 |
compatible = "brcm,bcm20702a1"; |
| 268 |
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; |
| 269 |
max-speed = <2000000>; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
&uart_AO { |
| 274 |
status = "okay"; |
| 275 |
pinctrl-0 = <&uart_ao_a_pins>; |
| 276 |
pinctrl-names = "default"; |
| 277 |
}; |
| 278 |
|
| 279 |
&usb0 { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&usb1 { |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&usb0_phy { |
| 288 |
status = "okay"; |
| 289 |
}; |
| 290 |
|
| 291 |
&usb1_phy { |
| 292 |
status = "okay"; |
| 293 |
}; |