Debian Codegraph @

arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts

raw
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 // Copyright (C) 2025 J. Neuschäfer <[email protected]>
3
4 /dts-v1/;
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/leds/common.h>
9
10 #include "meson8.dtsi"
11
12 / {
13 model = "Fernsehfee 3.0";
14 compatible = "tcu,fernsehfee3", "amlogic,meson8";
15
16 aliases {
17 serial0 = &uart_AO;
18 gpiochip0 = &gpio;
19 gpiochip1 = &gpio_ao;
20 i2c0 = &i2c_AO;
21 i2c1 = &i2c_B;
22 mmc0 = &sdhc;
23 mmc1 = &sdio;
24 };
25
26 chosen {
27 stdout-path = "serial0:115200n8";
28 };
29
30 memory@0 {
31 device_type = "memory";
32 reg = <0x0 0x40000000>; /* 1 GiB */
33 };
34
35 gpio-keys {
36 compatible = "gpio-keys-polled";
37 poll-interval = <100>;
38
39 power-button {
40 label = "Power button";
41 linux,code = <KEY_POWER>;
42 gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
43 };
44 };
45
46 leds {
47 compatible = "gpio-leds";
48
49 led-0 {
50 /*
51 * The power LED can be turned red, otherwise it is green.
52 */
53 gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
54 function = LED_FUNCTION_POWER;
55 color = <LED_COLOR_ID_RED>;
56 };
57 };
58
59 vcc_5v: regulator-5v {
60 /* 5V rail, always on as long as the system is running */
61 compatible = "regulator-fixed";
62 regulator-name = "5V";
63 regulator-min-microvolt = <5000000>;
64 regulator-max-microvolt = <5000000>;
65 regulator-always-on;
66 };
67
68 vcc_3v3: regulator-3v3 {
69 /* Chipown AP2420 step-down converter */
70 compatible = "regulator-fixed";
71 regulator-name = "3.3V";
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
74 vin-supply = <&vcc_5v>;
75 };
76
77 wifi_3v3: regulator-wifi {
78 compatible = "regulator-fixed";
79 regulator-name = "3.3V-WIFI";
80 regulator-min-microvolt = <3300000>;
81 regulator-max-microvolt = <3300000>;
82 vin-supply = <&vcc_3v3>;
83 gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
84 enable-active-high;
85 };
86 };
87
88 &cpu0 {
89 cpu-supply = <&vcck>;
90 };
91
92 &ethmac {
93 status = "okay";
94 pinctrl-0 = <&eth_pins>;
95 pinctrl-names = "default";
96 phy-handle = <&eth_phy0>;
97 phy-mode = "rmii";
98
99 mdio {
100 compatible = "snps,dwmac-mdio";
101 #address-cells = <1>;
102 #size-cells = <0>;
103
104 eth_phy0: ethernet-phy@0 {
105 /* IC Plus IP101A (0x02430c54) */
106 reg = <0>;
107
108 reset-assert-us = <10000>;
109 reset-deassert-us = <10000>;
110 reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
111 };
112 };
113 };
114
115 &i2c_AO {
116 status = "okay";
117 pinctrl-0 = <&i2c_ao_pins>;
118 pinctrl-names = "default";
119
120 pmic@32 {
121 compatible = "ricoh,rn5t618";
122 reg = <0x32>;
123 system-power-controller;
124
125 regulators {
126 vcck: DCDC1 {
127 regulator-name = "VCCK";
128 regulator-min-microvolt = <825000>;
129 regulator-max-microvolt = <1150000>;
130 regulator-boot-on;
131 regulator-always-on;
132 };
133
134 vddee: DCDC2 {
135 /* the output is also used as VDDAO */
136 regulator-name = "VDD_EE";
137 regulator-min-microvolt = <950000>;
138 regulator-max-microvolt = <1150000>;
139 regulator-boot-on;
140 regulator-always-on;
141 };
142
143 DCDC3 {
144 regulator-name = "VDD_DDR";
145 regulator-min-microvolt = <1500000>;
146 regulator-max-microvolt = <1500000>;
147 regulator-boot-on;
148 regulator-always-on;
149 };
150
151 LDO1 {
152 regulator-name = "VDDIO_AO28";
153 regulator-min-microvolt = <2900000>;
154 regulator-max-microvolt = <2900000>;
155 regulator-boot-on;
156 regulator-always-on;
157 };
158
159 LDO2 {
160 regulator-name = "VDDIO_AO18";
161 regulator-min-microvolt = <1800000>;
162 regulator-max-microvolt = <1800000>;
163 regulator-boot-on;
164 regulator-always-on;
165 };
166
167 vcc1v8_usb: LDO3 {
168 regulator-name = "VCC1V8_USB";
169 regulator-min-microvolt = <1800000>;
170 regulator-max-microvolt = <1800000>;
171 regulator-boot-on;
172 };
173
174 LDO4 {
175 /* This one appears to be unused */
176 regulator-name = "VCC2V8";
177 regulator-min-microvolt = <2850000>;
178 regulator-max-microvolt = <2850000>;
179 };
180
181 LDO5 {
182 regulator-name = "AVDD1V8";
183 regulator-min-microvolt = <1800000>;
184 regulator-max-microvolt = <1800000>;
185 regulator-boot-on;
186 regulator-always-on;
187 };
188
189 LDORTC1 {
190 regulator-name = "VDD_LDO";
191 regulator-min-microvolt = <2700000>;
192 regulator-max-microvolt = <2700000>;
193 regulator-boot-on;
194 regulator-always-on;
195 };
196
197 LDORTC2 {
198 regulator-name = "RTC_0V9";
199 regulator-min-microvolt = <900000>;
200 regulator-max-microvolt = <900000>;
201 regulator-boot-on;
202 regulator-always-on;
203 };
204 };
205 };
206
207 eeprom@50 {
208 /* Fairchild FM24C08A */
209 compatible = "atmel,24c08";
210 reg = <0x50>;
211 pagesize = <16>;
212 wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
213 num-addresses = <4>;
214 };
215 };
216
217 &i2c_B {
218 status = "okay";
219 pinctrl-0 = <&i2c_b_pins>;
220 pinctrl-names = "default";
221
222 /* TODO: SiI9293 HDMI receiver @ 0x39 */
223 };
224
225 &mali {
226 mali-supply = <&vddee>;
227 };
228
229 &sdhc {
230 status = "okay";
231 pinctrl-0 = <&sdxc_c_pins>;
232 pinctrl-names = "default";
233
234 /* eMMC */
235 bus-width = <8>;
236 max-frequency = <100000000>;
237
238 disable-wp;
239 cap-mmc-highspeed;
240 mmc-hs200-1_8v;
241 no-sdio;
242
243 vmmc-supply = <&vcc_3v3>;
244 vqmmc-supply = <&vcc_3v3>;
245 };
246
247 &sdio {
248 status = "okay";
249 pinctrl-0 = <&sd_b_pins>;
250
251 /* SD card */
252 slot@1 {
253 compatible = "mmc-slot";
254 reg = <1>;
255 status = "okay";
256
257 bus-width = <4>;
258 cap-mmc-highspeed;
259 cap-sd-highspeed;
260 disable-wp;
261
262 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
263
264 vmmc-supply = <&vcc_3v3>;
265 };
266 };
267
268 &uart_AO {
269 status = "okay";
270 pinctrl-0 = <&uart_ao_a_pins>;
271 pinctrl-names = "default";
272 };
273
274 &usb0 {
275 status = "okay";
276 };
277
278 &usb0_phy {
279 status = "okay";
280 phy-supply = <&vcc1v8_usb>;
281 };
282
283 &usb1 {
284 status = "okay";
285 dr_mode = "host";
286 #address-cells = <1>;
287 #size-cells = <0>;
288
289 wifi: wifi@1 {
290 /* Realtek RTL8188 2.4GHz WiFi module */
291 compatible = "usbbda,179";
292 reg = <1>;
293 vdd-supply = <&wifi_3v3>;
294 };
295 };
296
297 &usb1_phy {
298 status = "okay";
299 phy-supply = <&vcc1v8_usb>;
300 };
301
302 &ir_receiver {
303 status = "okay";
304 pinctrl-0 = <&ir_recv_pins>;
305 pinctrl-names = "default";
306 };