| 1 |
// SPDX-License-Identifier: GPL-2.0 OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2015 Endless Mobile, Inc. |
| 4 |
* Author: Carlo Caione <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
|
| 11 |
#include "meson8b.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "TRONFY MXQ S805"; |
| 15 |
compatible = "tronfy,mxq", "amlogic,meson8b"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
serial0 = &uart_AO; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen { |
| 22 |
stdout-path = "serial0:115200n8"; |
| 23 |
}; |
| 24 |
|
| 25 |
memory@40000000 { |
| 26 |
device_type = "memory"; |
| 27 |
reg = <0x40000000 0x40000000>; |
| 28 |
}; |
| 29 |
|
| 30 |
vcck: regulator-vcck { |
| 31 |
compatible = "pwm-regulator"; |
| 32 |
|
| 33 |
regulator-name = "VCCK"; |
| 34 |
regulator-min-microvolt = <860000>; |
| 35 |
regulator-max-microvolt = <1140000>; |
| 36 |
|
| 37 |
pwm-supply = <&vcc_5v>; |
| 38 |
|
| 39 |
pwms = <&pwm_cd 0 1148 0>; |
| 40 |
pwm-dutycycle-range = <100 0>; |
| 41 |
|
| 42 |
regulator-boot-on; |
| 43 |
regulator-always-on; |
| 44 |
}; |
| 45 |
|
| 46 |
vcc_1v8: regulator-vcc1v8 { |
| 47 |
compatible = "regulator-fixed"; |
| 48 |
|
| 49 |
regulator-name = "VCC1V8"; |
| 50 |
regulator-min-microvolt = <1800000>; |
| 51 |
regulator-max-microvolt = <1800000>; |
| 52 |
|
| 53 |
vin-supply = <&vcc_3v3>; |
| 54 |
}; |
| 55 |
|
| 56 |
vcc_3v3: regulator-vcc3v3 { |
| 57 |
compatible = "regulator-fixed"; |
| 58 |
|
| 59 |
regulator-name = "VCC3V3"; |
| 60 |
regulator-min-microvolt = <3300000>; |
| 61 |
regulator-max-microvolt = <3300000>; |
| 62 |
|
| 63 |
vin-supply = <&vcc_5v>; |
| 64 |
}; |
| 65 |
|
| 66 |
vcc_5v: regulator-vcc5v { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
|
| 69 |
regulator-name = "VCC5V"; |
| 70 |
regulator-min-microvolt = <5000000>; |
| 71 |
regulator-max-microvolt = <5000000>; |
| 72 |
|
| 73 |
regulator-boot-on; |
| 74 |
regulator-always-on; |
| 75 |
}; |
| 76 |
|
| 77 |
vddee: regulator-vddee { |
| 78 |
compatible = "pwm-regulator"; |
| 79 |
|
| 80 |
regulator-name = "VDDEE"; |
| 81 |
regulator-min-microvolt = <860000>; |
| 82 |
regulator-max-microvolt = <1140000>; |
| 83 |
|
| 84 |
pwm-supply = <&vcc_5v>; |
| 85 |
|
| 86 |
pwms = <&pwm_cd 1 1148 0>; |
| 87 |
pwm-dutycycle-range = <100 0>; |
| 88 |
|
| 89 |
regulator-boot-on; |
| 90 |
regulator-always-on; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
&cpu0 { |
| 95 |
cpu-supply = <&vcck>; |
| 96 |
}; |
| 97 |
|
| 98 |
ðmac { |
| 99 |
status = "okay"; |
| 100 |
|
| 101 |
pinctrl-0 = <ð_rmii_pins>; |
| 102 |
pinctrl-names = "default"; |
| 103 |
|
| 104 |
phy-handle = <ð_phy0>; |
| 105 |
phy-mode = "rmii"; |
| 106 |
|
| 107 |
mdio { |
| 108 |
compatible = "snps,dwmac-mdio"; |
| 109 |
#address-cells = <1>; |
| 110 |
#size-cells = <0>; |
| 111 |
|
| 112 |
eth_phy0: ethernet-phy@0 { |
| 113 |
/* IC Plus IP101A/G (0x02430c54) */ |
| 114 |
reg = <0>; |
| 115 |
|
| 116 |
reset-assert-us = <10000>; |
| 117 |
reset-deassert-us = <10000>; |
| 118 |
reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; |
| 119 |
|
| 120 |
icplus,select-interrupt; |
| 121 |
interrupt-parent = <&gpio_intc>; |
| 122 |
/* GPIOH_3 */ |
| 123 |
interrupts = <17 IRQ_TYPE_LEVEL_LOW>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
&mali { |
| 129 |
mali-supply = <&vddee>; |
| 130 |
}; |
| 131 |
|
| 132 |
&saradc { |
| 133 |
status = "okay"; |
| 134 |
vref-supply = <&vcc_1v8>; |
| 135 |
}; |
| 136 |
|
| 137 |
&sdio { |
| 138 |
status = "okay"; |
| 139 |
|
| 140 |
pinctrl-0 = <&sd_b_pins>; |
| 141 |
pinctrl-names = "default"; |
| 142 |
|
| 143 |
/* SD card */ |
| 144 |
sd_card_slot: slot@1 { |
| 145 |
compatible = "mmc-slot"; |
| 146 |
reg = <1>; |
| 147 |
status = "okay"; |
| 148 |
|
| 149 |
bus-width = <4>; |
| 150 |
no-sdio; |
| 151 |
cap-mmc-highspeed; |
| 152 |
cap-sd-highspeed; |
| 153 |
disable-wp; |
| 154 |
|
| 155 |
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; |
| 156 |
|
| 157 |
vmmc-supply = <&vcc_3v3>; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
&pwm_cd { |
| 162 |
status = "okay"; |
| 163 |
pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; |
| 164 |
pinctrl-names = "default"; |
| 165 |
}; |
| 166 |
|
| 167 |
&uart_AO { |
| 168 |
status = "okay"; |
| 169 |
pinctrl-0 = <&uart_ao_a_pins>; |
| 170 |
pinctrl-names = "default"; |
| 171 |
}; |
| 172 |
|
| 173 |
&usb0 { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&usb0_phy { |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&usb1 { |
| 182 |
status = "okay"; |
| 183 |
}; |
| 184 |
|
| 185 |
&usb1_phy { |
| 186 |
status = "okay"; |
| 187 |
}; |