Debian Codegraph @

src/shaders/h264/ildb/ILDB_header.inc

raw
1 /*
2 * Copyright © <2010>, Intel Corporation.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
11 *
12 * The above copyright notice and this permission notice (including the
13 * next paragraph) shall be included in all copies or substantial portions
14 * of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
17 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
18 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
19 * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
20 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
21 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
22 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
23 *
24 * This file was originally licensed under the following license
25 *
26 * Licensed under the Apache License, Version 2.0 (the "License");
27 * you may not use this file except in compliance with the License.
28 * You may obtain a copy of the License at
29 *
30 * http://www.apache.org/licenses/LICENSE-2.0
31 *
32 * Unless required by applicable law or agreed to in writing, software
33 * distributed under the License is distributed on an "AS IS" BASIS,
34 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
35 * See the License for the specific language governing permissions and
36 * limitations under the License.
37 *
38 */
39 #if !defined(__ILDB_HEADER__) // Make sure this file is only included once
40 #define __ILDB_HEADER__
41
42 // Module name: ILDB_header.inc
43 //
44
45 .default_execution_size (16)
46 .default_register_type :ub
47
48 #undef NULLREG
49 #undef RETURN_REG
50 #undef EOTMSGDSC
51 #undef MSGSRC
52 #undef END_THREAD
53 #undef TSMSGDSC
54
55 // ----------- Common constant definitions ------------
56 //
57 // Bit position constants
58 //
59 #define BIT0 0x01
60 #define BIT1 0x02
61 #define BIT2 0x04
62 #define BIT3 0x08
63 #define BIT4 0x10
64 #define BIT5 0x20
65 #define BIT6 0x40
66 #define BIT7 0x80
67 #define BIT8 0x0100
68 #define BIT9 0x0200
69 #define BIT10 0x0400
70 #define BIT11 0x0800
71 #define BIT12 0x1000
72 #define BIT13 0x2000
73 #define BIT14 0x4000
74 #define BIT15 0x8000
75 #define BIT16 0x00010000
76 #define BIT17 0x00020000
77 #define BIT18 0x00040000
78 #define BIT19 0x00080000
79 #define BIT20 0x00100000
80 #define BIT21 0x00200000
81 #define BIT22 0x00400000
82 #define BIT23 0x00800000
83 #define BIT24 0x01000000
84 #define BIT25 0x02000000
85 #define BIT26 0x04000000
86 #define BIT27 0x08000000
87 #define BIT28 0x10000000
88 #define BIT29 0x20000000
89 #define BIT30 0x40000000
90 #define BIT31 0x80000000
91
92 // Common constants
93 //
94 #define INST_SIZE 16 // Instruction size in byte
95
96 #define GRFWIB 32 // GRF register width in byte
97 #define GRFWIW 16 // GRF register width in word
98 #define GRFWID 8 // GRF register width in dword
99
100 #define TOP_FIELD 0
101 #define BOTTOM_FIELD 1
102
103 #define PREVIOUS_FRAME 0 // Previous frame
104 #define CURRENT_FRAME 1 // Current frame
105 #define NEXT_FRAME 2 // Next frame
106
107 #define Y_ROW_WIDTH 16 // in bytes
108 #define UV_ROW_WIDTH 8
109
110 // Useful macros
111 //
112 #define REGION(Width,HStride) <Width*HStride;Width,HStride> // Region definition when ExecSize = Width
113
114 #define NULLREG null<1>:d
115 #define NULLREGW null<1>:w
116
117 #define RETURN_REG r62 // Return pointer for all sub-routine calls (type DWORD)
118
119 #define CALL(subFunc, skipInst) add (1) RETURN_REG<1>:ud ip:ud (1+skipInst)*INST_SIZE \n\
120 jmpi (1) subFunc
121
122 #define RETURN mov (1) ip:ud RETURN_REG<0;1,0>:ud // Return to calling module
123
124 #define PRED_CALL(flag, subFunc, skipInst) add (1) RETURN_REG<1>:ud ip:ud (1+skipInst)*INST_SIZE \n\
125 (flag) jmpi (1) subFunc
126
127
128 // Definitions for surface states, GRF regions, and common data fields
129 //
130 // Note: Each kernel needs to define a specific symbol before including this
131 // header file to ensure correct definitions.
132 //
133
134
135
136 #if defined(AVC_ILDB)
137
138 .reg_count_total 64
139 .reg_count_payload 4
140
141 // Binding Table Index
142 #define BI_CNTRL_DATA 0 // Control data map
143 #define BI_SRC_Y 1
144 #define BI_SRC_UV 2
145 #define BI_DEST_Y 3
146 #define BI_DEST_UV 4
147
148
149 //========== Left MB, 4x16 in r2 and r3 ==========
150 #define PREV_MB_Y_BASE 64 //2*GRFWIB // Byte offset to r2
151 .declare PREV_MB_YD Base=r2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud
152 .declare PREV_MB_YW Base=r2 ElementSize=2 SrcRegion=REGION(8,1) Type=uw
153 .declare PREV_MB_YB Base=r2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
154
155 #define PREV_MB_U_BASE 64 //2*GRFWIB // seperate thread from Y // Byte offset to r2
156 .declare PREV_MB_UD Base=r2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud
157 .declare PREV_MB_UW Base=r2 ElementSize=2 SrcRegion=REGION(16,1) Type=uw
158 .declare PREV_MB_UB Base=r2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
159
160 #define PREV_MB_V_BASE 65 //2*GRFWIB+1 // NV12 // Byte offset to r2.1
161 .declare PREV_MB_VB Base=r2.1 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
162
163 //========== Top MB, 16x4 in r4 and r5 ==========
164 #define TOP_MB_Y_BASE 128 //4*GRFWIB // Byte offset to r4
165 .declare TOP_MB_YD Base=r4 ElementSize=4 SrcRegion=REGION(8,1) Type=ud
166 .declare TOP_MB_YW Base=r4 ElementSize=2 SrcRegion=REGION(8,1) Type=uw
167 .declare TOP_MB_YB Base=r4 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
168
169 #define TOP_MB_U_BASE 128 //4*GRFWIB // seperate thread from Y // Byte offset to r4
170 .declare TOP_MB_UD Base=r4 ElementSize=4 SrcRegion=REGION(8,1) Type=ud
171 .declare TOP_MB_UW Base=r4 ElementSize=2 SrcRegion=REGION(16,1) Type=uw
172 .declare TOP_MB_UB Base=r4 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
173
174 #define TOP_MB_V_BASE 129 //4*GRFWIB+1 // NV12 // Byte offset to r4.1
175 .declare TOP_MB_VB Base=r4.1 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
176
177
178 //========== Current MB, 16x16 in r6-r13 ==========
179 #define SRC_MB_Y_BASE 192 //6*GRFWIB // Byte offset to r6
180 .declare SRC_YD Base=r6 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For read and write, 8 GRFs
181 .declare SRC_YW Base=r6 ElementSize=2 SrcRegion=REGION(8,1) Type=uw
182 .declare SRC_YB Base=r6 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 8 GRFs
183
184 #define SRC_MB_U_BASE 192 //6*GRFWIB // seperate thread from Y // Byte offset to r6
185 .declare SRC_UD Base=r6 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For read and write, 2 GRFs
186 .declare SRC_UW Base=r6 ElementSize=2 SrcRegion=REGION(16,1) Type=uw // For read and write, 4 GRFs
187 .declare SRC_UB Base=r6 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 2 GRFs
188
189 #define SRC_MB_V_BASE 193 // 6*GRFWIB+1 // NV12 // Byte offset to r6.1
190 .declare SRC_VD Base=r6.1 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For read and write, 2 GRFs
191 .declare SRC_VW Base=r6.1 ElementSize=2 SrcRegion=REGION(16,1) Type=uw // For read and write, 4 GRFs
192 .declare SRC_VB Base=r6.1 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 2 GRFs
193
194 #else // No kernel specified, define nothing.
195
196 .reg_count_total 64
197 .reg_count_payload 2
198
199 #define SRCAOFF r1.0:ud // Offset into alpha data
200 #define SRCOFF r1.1:ud // Offset into source YUV data
201 #define ORIX r1.4 // :w, H. origin of the destination block in pel
202 #define ORIY r1.5 // :w, V. origin of the destination block in pel
203
204 #endif
205
206 // ----------- Message Payload Header fields------------
207 //
208 #define IDP r0.2:ud // Interface Descriptor Pointer
209 #define BTP r0.4:ud // Binding Table Pointer
210
211 // ----------- Common Message Descriptor ------------
212 //
213 #ifdef DEV_ILK
214 #define GW_DCN // Should be enabled only for ILK-B0 and beyond
215 #define MSG_GW 0x03 // Message Gateway
216 #define MSG_GW_EOT 0x23 // Message Gateway plus EOT bit set (For ILK only)
217 #define DAPREAD 0x04 // Data Port Read Extended Message Descriptor,
218 #define DAPWRITE 0x05 // Data Port Write Extended Message Descriptor,
219 #define URBWRITE 0x06 // URB
220 #define TS 0x07 // Thread Spawner Extended Message Descriptor
221 #define TS_EOT 0x27 // End of Thread Extended Message Descriptor
222
223 #define EOTMSGDSC 0x02000000 // End of Thread Message Descriptor /w URB handle dereferenced (used by root kernel)
224 #define CHILD_EOTMSGDSC 0x02000012 // End of Child Thread Message Descriptor w/o URB handle dereferenced
225
226 // Data Port Message Descriptor
227 #define DWBRMSGDSC_RC 0x02086000 // DWORD Block Read Message Descriptor, reading from render cache = 6.
228 #define DWBRMSGDSC_RC_TF 0x02086600 // DWORD Block Read Message Descriptor, reading from render cache = 6.
229 #define DWBRMSGDSC_RC_BF 0x02086700 // DWORD Block Read Message Descriptor, reading from render cache = 6.
230 #define DWBRMSGDSC_SC 0x0208A000 // DWORD Block Read Message Descriptor, reading from sampler cache = A.
231 #define DWBRMSGDSC_SC_TF 0x0208E600 // DWORD Block Read Message Descriptor, reading top field from field mode sampler cache.
232 #define DWBRMSGDSC_SC_BF 0x0208E700 // DWORD Block Read Message Descriptor, reading bottom field from field mode sampler cache.
233
234 #define ILDBRMSGDSC 0x02085800 // AVC ILDB Control Data Read Msg Desc on Bearlake-C
235
236 #define DWBWMSGDSC 0x02082000 // DWORD Block Write Message Descriptor
237 #define DWBWMSGDSC_WC 0x0218A000 // DWORD Block Write Message Descriptor + write commit
238
239 // URB Message Descriptor
240 #define URBWMSGDSC 0x02080000 // URB Write Message Descriptor
241
242 // Thread Spawner Message Descriptor
243 #define TSMSGDSC 0x02000001
244
245 // Message Gateway Message Descriptors
246 #define OGWMSGDSC 0x02000000 // OpenGateway Message Descriptor
247 #define CGWMSGDSC 0x02000001 // CloseGateway Message Descriptor
248 #define FWDMSGDSC 0x02000002 // ForwardMsg Message Descriptor
249 #define NOTIFYMSG 0x00008000 // Send notification with ForwardMsg message
250
251 #define RESP_LEN(len) 0x100000*len
252 #define MSG_LEN(len) 0x2000000*len
253
254 #else // Pre DEV_ILK
255
256 #define MSG_GW
257 #define MSG_GW_EOT
258 #define DAPREAD
259 #define DAPWRITE
260 #define URBWRITE
261 #define TS
262 #define TS_EOT
263
264 #define EOTMSGDSC 0x87100000 // End of Thread Message Descriptor /w URB handle dereferenced (used by root kernel)
265 #define CHILD_EOTMSGDSC 0x87100012 // End of Child Thread Message Descriptor w/o URB handle dereferenced
266
267 // Data Port Message Descriptor
268 #define DWBRMSGDSC_RC 0x04106000 // DWORD Block Read Message Descriptor, reading from render cache = 6.
269 #define DWBRMSGDSC_RC_TF 0x04106600 // DWORD Block Read Message Descriptor, reading from render cache = 6.
270 #define DWBRMSGDSC_RC_BF 0x04106700 // DWORD Block Read Message Descriptor, reading from render cache = 6.
271 #define DWBRMSGDSC_SC 0x0410A000 // DWORD Block Read Message Descriptor, reading from sampler cache = A.
272 #define DWBRMSGDSC_SC_TF 0x0410A600 // DWORD Block Read Message Descriptor, reading top field from field mode sampler cache.
273 #define DWBRMSGDSC_SC_BF 0x0410A700 // DWORD Block Read Message Descriptor, reading bottom field from field mode sampler cache.
274
275 #define ILDBRMSGDSC 0x04105800 // AVC ILDB Control Data Read Msg Desc on Bearlake-C
276
277 #define DWBWMSGDSC 0x05102000 // DWORD Block Write Message Descriptor
278 #define DWBWMSGDSC_WC 0x0511A000 // DWORD Block Write Message Descriptor + write commit
279
280 // URB Message Descriptor
281 #define URBWMSGDSC 0x06100000 // URB Write Message Descriptor
282
283 // Thread Spawner Message Descriptor
284 #define TSMSGDSC 0x07100001
285
286 // Message Gateway Message Descriptors
287 #define OGWMSGDSC 0x03100000 // OpenGateway Message Descriptor
288 #define CGWMSGDSC 0x03100001 // CloseGateway Message Descriptor
289 #define FWDMSGDSC 0x03100002 // ForwardMsg Message Descriptor
290 #define NOTIFYMSG 0x00008000 // Send notification with ForwardMsg message
291
292 #define RESP_LEN(len) 0x10000*len
293 #define MSG_LEN(len) 0x100000*len
294
295 // bits 15 - 0 = 01 011 000 00000000 = 0101 1000 0000 0000 = 5800
296 // Render cache, AVC loop rd,
297 #endif // DEV_ILK
298
299 // Enable frame/field selection in message descriptor
300 #define ENMSGDSCFM 0x400 // Enable MSGDSC to select frame surface
301 #define ENMSGDSCTF 0x600 // Enable MSGDSC to select top field surface
302 #define ENMSGDSCBF 0x700 // Enable MSGDSC to select bottom field surface
303
304 #define END_THREAD send (8) NULLREG MSGHDR r0:ud TS_EOT EOTMSGDSC
305 #define END_CHILD_THREAD send (8) NULLREG MSGHDR r0:ud TS_EOT CHILD_EOTMSGDSC
306
307 // ----------- Message related register ------------
308 //
309 #define MSGHDR m1 // Message Payload Header
310 #define MSGHDRY m1 // Message Payload Header register for Y data
311 #define MSGHDRU m2 // Message Payload Header register for U data
312 #define MSGHDRV m3 // Message Payload Header register for V data
313
314 #define MSGHDRC m1 // Message Payload Header register for CUR MB
315 #define MSGHDRL m2 // Message Payload Header register for LEFT MB
316 #define MSGHDRT m3 // Message Payload Header register for TOP MB
317
318 #define MSGHDRYA m4 // Second Message Payload Header register for Y data
319 #define MSGSRC r63 // Message source register
320 #define MSGDSC a0.0:ud // Message Descriptor register (type DWORD)
321
322 #define MH_ORI MSGSRC.0 // DWORD block R/W message header block offset
323 #define MH_ORIX MSGSRC.0 // DWORD block R/W message header X offset
324 #define MH_ORIY MSGSRC.1 // DWORD block R/W message header Y offset
325 #define MH_SIZE MSGSRC.2 // DWORD block R/W message header block width & height
326
327
328 // M2 - M9 for message data payload
329 .declare MSGPAYLOADB Base=m2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub
330 .declare MSGPAYLOADW Base=m2 ElementSize=2 SrcRegion=REGION(16,1) Type=uw
331 .declare MSGPAYLOADD Base=m2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud
332 .declare MSGPAYLOADF Base=m2 ElementSize=4 SrcRegion=REGION(8,1) Type=f
333
334 // End of ILDB_header.inc
335
336 #endif // !defined(__ILDB_HEADER__)