/* * Copyright © <2010>, Intel Corporation. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ #if !defined(__ILDB_HEADER__) // Make sure this file is only included once #define __ILDB_HEADER__ // Module name: ILDB_header.inc // .default_execution_size (16) .default_register_type :ub #undef NULLREG #undef RETURN_REG #undef EOTMSGDSC #undef MSGSRC #undef END_THREAD #undef TSMSGDSC // ----------- Common constant definitions ------------ // // Bit position constants // #define BIT0 0x01 #define BIT1 0x02 #define BIT2 0x04 #define BIT3 0x08 #define BIT4 0x10 #define BIT5 0x20 #define BIT6 0x40 #define BIT7 0x80 #define BIT8 0x0100 #define BIT9 0x0200 #define BIT10 0x0400 #define BIT11 0x0800 #define BIT12 0x1000 #define BIT13 0x2000 #define BIT14 0x4000 #define BIT15 0x8000 #define BIT16 0x00010000 #define BIT17 0x00020000 #define BIT18 0x00040000 #define BIT19 0x00080000 #define BIT20 0x00100000 #define BIT21 0x00200000 #define BIT22 0x00400000 #define BIT23 0x00800000 #define BIT24 0x01000000 #define BIT25 0x02000000 #define BIT26 0x04000000 #define BIT27 0x08000000 #define BIT28 0x10000000 #define BIT29 0x20000000 #define BIT30 0x40000000 #define BIT31 0x80000000 // Common constants // #define INST_SIZE 16 // Instruction size in byte #define GRFWIB 32 // GRF register width in byte #define GRFWIW 16 // GRF register width in word #define GRFWID 8 // GRF register width in dword #define TOP_FIELD 0 #define BOTTOM_FIELD 1 #define PREVIOUS_FRAME 0 // Previous frame #define CURRENT_FRAME 1 // Current frame #define NEXT_FRAME 2 // Next frame #define Y_ROW_WIDTH 16 // in bytes #define UV_ROW_WIDTH 8 // Useful macros // #define REGION(Width,HStride) // Region definition when ExecSize = Width #define NULLREG null<1>:d #define NULLREGW null<1>:w #define RETURN_REG r62 // Return pointer for all sub-routine calls (type DWORD) #define CALL(subFunc, skipInst) add (1) RETURN_REG<1>:ud ip:ud (1+skipInst)*INST_SIZE \n\ jmpi (1) subFunc #define RETURN mov (1) ip:ud RETURN_REG<0;1,0>:ud // Return to calling module #define PRED_CALL(flag, subFunc, skipInst) add (1) RETURN_REG<1>:ud ip:ud (1+skipInst)*INST_SIZE \n\ (flag) jmpi (1) subFunc // Definitions for surface states, GRF regions, and common data fields // // Note: Each kernel needs to define a specific symbol before including this // header file to ensure correct definitions. // #if defined(AVC_ILDB) .reg_count_total 64 .reg_count_payload 4 // Binding Table Index #define BI_CNTRL_DATA 0 // Control data map #define BI_SRC_Y 1 #define BI_SRC_UV 2 #define BI_DEST_Y 3 #define BI_DEST_UV 4 //========== Left MB, 4x16 in r2 and r3 ========== #define PREV_MB_Y_BASE 64 //2*GRFWIB // Byte offset to r2 .declare PREV_MB_YD Base=r2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud .declare PREV_MB_YW Base=r2 ElementSize=2 SrcRegion=REGION(8,1) Type=uw .declare PREV_MB_YB Base=r2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub #define PREV_MB_U_BASE 64 //2*GRFWIB // seperate thread from Y // Byte offset to r2 .declare PREV_MB_UD Base=r2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud .declare PREV_MB_UW Base=r2 ElementSize=2 SrcRegion=REGION(16,1) Type=uw .declare PREV_MB_UB Base=r2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub #define PREV_MB_V_BASE 65 //2*GRFWIB+1 // NV12 // Byte offset to r2.1 .declare PREV_MB_VB Base=r2.1 ElementSize=1 SrcRegion=REGION(16,1) Type=ub //========== Top MB, 16x4 in r4 and r5 ========== #define TOP_MB_Y_BASE 128 //4*GRFWIB // Byte offset to r4 .declare TOP_MB_YD Base=r4 ElementSize=4 SrcRegion=REGION(8,1) Type=ud .declare TOP_MB_YW Base=r4 ElementSize=2 SrcRegion=REGION(8,1) Type=uw .declare TOP_MB_YB Base=r4 ElementSize=1 SrcRegion=REGION(16,1) Type=ub #define TOP_MB_U_BASE 128 //4*GRFWIB // seperate thread from Y // Byte offset to r4 .declare TOP_MB_UD Base=r4 ElementSize=4 SrcRegion=REGION(8,1) Type=ud .declare TOP_MB_UW Base=r4 ElementSize=2 SrcRegion=REGION(16,1) Type=uw .declare TOP_MB_UB Base=r4 ElementSize=1 SrcRegion=REGION(16,1) Type=ub #define TOP_MB_V_BASE 129 //4*GRFWIB+1 // NV12 // Byte offset to r4.1 .declare TOP_MB_VB Base=r4.1 ElementSize=1 SrcRegion=REGION(16,1) Type=ub //========== Current MB, 16x16 in r6-r13 ========== #define SRC_MB_Y_BASE 192 //6*GRFWIB // Byte offset to r6 .declare SRC_YD Base=r6 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For read and write, 8 GRFs .declare SRC_YW Base=r6 ElementSize=2 SrcRegion=REGION(8,1) Type=uw .declare SRC_YB Base=r6 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 8 GRFs #define SRC_MB_U_BASE 192 //6*GRFWIB // seperate thread from Y // Byte offset to r6 .declare SRC_UD Base=r6 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For read and write, 2 GRFs .declare SRC_UW Base=r6 ElementSize=2 SrcRegion=REGION(16,1) Type=uw // For read and write, 4 GRFs .declare SRC_UB Base=r6 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 2 GRFs #define SRC_MB_V_BASE 193 // 6*GRFWIB+1 // NV12 // Byte offset to r6.1 .declare SRC_VD Base=r6.1 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For read and write, 2 GRFs .declare SRC_VW Base=r6.1 ElementSize=2 SrcRegion=REGION(16,1) Type=uw // For read and write, 4 GRFs .declare SRC_VB Base=r6.1 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 2 GRFs #else // No kernel specified, define nothing. .reg_count_total 64 .reg_count_payload 2 #define SRCAOFF r1.0:ud // Offset into alpha data #define SRCOFF r1.1:ud // Offset into source YUV data #define ORIX r1.4 // :w, H. origin of the destination block in pel #define ORIY r1.5 // :w, V. origin of the destination block in pel #endif // ----------- Message Payload Header fields------------ // #define IDP r0.2:ud // Interface Descriptor Pointer #define BTP r0.4:ud // Binding Table Pointer // ----------- Common Message Descriptor ------------ // #ifdef DEV_ILK #define GW_DCN // Should be enabled only for ILK-B0 and beyond #define MSG_GW 0x03 // Message Gateway #define MSG_GW_EOT 0x23 // Message Gateway plus EOT bit set (For ILK only) #define DAPREAD 0x04 // Data Port Read Extended Message Descriptor, #define DAPWRITE 0x05 // Data Port Write Extended Message Descriptor, #define URBWRITE 0x06 // URB #define TS 0x07 // Thread Spawner Extended Message Descriptor #define TS_EOT 0x27 // End of Thread Extended Message Descriptor #define EOTMSGDSC 0x02000000 // End of Thread Message Descriptor /w URB handle dereferenced (used by root kernel) #define CHILD_EOTMSGDSC 0x02000012 // End of Child Thread Message Descriptor w/o URB handle dereferenced // Data Port Message Descriptor #define DWBRMSGDSC_RC 0x02086000 // DWORD Block Read Message Descriptor, reading from render cache = 6. #define DWBRMSGDSC_RC_TF 0x02086600 // DWORD Block Read Message Descriptor, reading from render cache = 6. #define DWBRMSGDSC_RC_BF 0x02086700 // DWORD Block Read Message Descriptor, reading from render cache = 6. #define DWBRMSGDSC_SC 0x0208A000 // DWORD Block Read Message Descriptor, reading from sampler cache = A. #define DWBRMSGDSC_SC_TF 0x0208E600 // DWORD Block Read Message Descriptor, reading top field from field mode sampler cache. #define DWBRMSGDSC_SC_BF 0x0208E700 // DWORD Block Read Message Descriptor, reading bottom field from field mode sampler cache. #define ILDBRMSGDSC 0x02085800 // AVC ILDB Control Data Read Msg Desc on Bearlake-C #define DWBWMSGDSC 0x02082000 // DWORD Block Write Message Descriptor #define DWBWMSGDSC_WC 0x0218A000 // DWORD Block Write Message Descriptor + write commit // URB Message Descriptor #define URBWMSGDSC 0x02080000 // URB Write Message Descriptor // Thread Spawner Message Descriptor #define TSMSGDSC 0x02000001 // Message Gateway Message Descriptors #define OGWMSGDSC 0x02000000 // OpenGateway Message Descriptor #define CGWMSGDSC 0x02000001 // CloseGateway Message Descriptor #define FWDMSGDSC 0x02000002 // ForwardMsg Message Descriptor #define NOTIFYMSG 0x00008000 // Send notification with ForwardMsg message #define RESP_LEN(len) 0x100000*len #define MSG_LEN(len) 0x2000000*len #else // Pre DEV_ILK #define MSG_GW #define MSG_GW_EOT #define DAPREAD #define DAPWRITE #define URBWRITE #define TS #define TS_EOT #define EOTMSGDSC 0x87100000 // End of Thread Message Descriptor /w URB handle dereferenced (used by root kernel) #define CHILD_EOTMSGDSC 0x87100012 // End of Child Thread Message Descriptor w/o URB handle dereferenced // Data Port Message Descriptor #define DWBRMSGDSC_RC 0x04106000 // DWORD Block Read Message Descriptor, reading from render cache = 6. #define DWBRMSGDSC_RC_TF 0x04106600 // DWORD Block Read Message Descriptor, reading from render cache = 6. #define DWBRMSGDSC_RC_BF 0x04106700 // DWORD Block Read Message Descriptor, reading from render cache = 6. #define DWBRMSGDSC_SC 0x0410A000 // DWORD Block Read Message Descriptor, reading from sampler cache = A. #define DWBRMSGDSC_SC_TF 0x0410A600 // DWORD Block Read Message Descriptor, reading top field from field mode sampler cache. #define DWBRMSGDSC_SC_BF 0x0410A700 // DWORD Block Read Message Descriptor, reading bottom field from field mode sampler cache. #define ILDBRMSGDSC 0x04105800 // AVC ILDB Control Data Read Msg Desc on Bearlake-C #define DWBWMSGDSC 0x05102000 // DWORD Block Write Message Descriptor #define DWBWMSGDSC_WC 0x0511A000 // DWORD Block Write Message Descriptor + write commit // URB Message Descriptor #define URBWMSGDSC 0x06100000 // URB Write Message Descriptor // Thread Spawner Message Descriptor #define TSMSGDSC 0x07100001 // Message Gateway Message Descriptors #define OGWMSGDSC 0x03100000 // OpenGateway Message Descriptor #define CGWMSGDSC 0x03100001 // CloseGateway Message Descriptor #define FWDMSGDSC 0x03100002 // ForwardMsg Message Descriptor #define NOTIFYMSG 0x00008000 // Send notification with ForwardMsg message #define RESP_LEN(len) 0x10000*len #define MSG_LEN(len) 0x100000*len // bits 15 - 0 = 01 011 000 00000000 = 0101 1000 0000 0000 = 5800 // Render cache, AVC loop rd, #endif // DEV_ILK // Enable frame/field selection in message descriptor #define ENMSGDSCFM 0x400 // Enable MSGDSC to select frame surface #define ENMSGDSCTF 0x600 // Enable MSGDSC to select top field surface #define ENMSGDSCBF 0x700 // Enable MSGDSC to select bottom field surface #define END_THREAD send (8) NULLREG MSGHDR r0:ud TS_EOT EOTMSGDSC #define END_CHILD_THREAD send (8) NULLREG MSGHDR r0:ud TS_EOT CHILD_EOTMSGDSC // ----------- Message related register ------------ // #define MSGHDR m1 // Message Payload Header #define MSGHDRY m1 // Message Payload Header register for Y data #define MSGHDRU m2 // Message Payload Header register for U data #define MSGHDRV m3 // Message Payload Header register for V data #define MSGHDRC m1 // Message Payload Header register for CUR MB #define MSGHDRL m2 // Message Payload Header register for LEFT MB #define MSGHDRT m3 // Message Payload Header register for TOP MB #define MSGHDRYA m4 // Second Message Payload Header register for Y data #define MSGSRC r63 // Message source register #define MSGDSC a0.0:ud // Message Descriptor register (type DWORD) #define MH_ORI MSGSRC.0 // DWORD block R/W message header block offset #define MH_ORIX MSGSRC.0 // DWORD block R/W message header X offset #define MH_ORIY MSGSRC.1 // DWORD block R/W message header Y offset #define MH_SIZE MSGSRC.2 // DWORD block R/W message header block width & height // M2 - M9 for message data payload .declare MSGPAYLOADB Base=m2 ElementSize=1 SrcRegion=REGION(16,1) Type=ub .declare MSGPAYLOADW Base=m2 ElementSize=2 SrcRegion=REGION(16,1) Type=uw .declare MSGPAYLOADD Base=m2 ElementSize=4 SrcRegion=REGION(8,1) Type=ud .declare MSGPAYLOADF Base=m2 ElementSize=4 SrcRegion=REGION(8,1) Type=f // End of ILDB_header.inc #endif // !defined(__ILDB_HEADER__)