Debian Codegraph @

linux/pcmcia-cs/clients/xirc2ps_cs.c

raw
1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
4 *
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
8 *
9 * 2000-09-24 <[email protected]> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
13 *
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
15 * PCMCIA driver.
16 *
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
18 *
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
23 *
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
28 *
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
32 *
33 *
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
39 *
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
42 * are met:
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
51 * written permission.
52 *
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
64 */
65
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/sched.h>
70 #include <linux/ptrace.h>
71 #include <linux/slab.h>
72 #include <linux/string.h>
73 #include <linux/timer.h>
74 #include <linux/interrupt.h>
75 #include <linux/in.h>
76 #include <linux/delay.h>
77 #include <asm/io.h>
78 #include <asm/system.h>
79 #include <asm/bitops.h>
80
81 #include <linux/netdevice.h>
82 #include <linux/etherdevice.h>
83 #include <linux/skbuff.h>
84 #include <linux/if_arp.h>
85 #include <linux/ioport.h>
86
87 #include <pcmcia/version.h>
88 #include <pcmcia/cs_types.h>
89 #include <pcmcia/cs.h>
90 #include <pcmcia/cistpl.h>
91 #include <pcmcia/cisreg.h>
92 #include <pcmcia/ciscode.h>
93
94 #ifndef MANFID_COMPAQ
95 #define MANFID_COMPAQ 0x0138
96 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
97 #endif
98
99 #include <pcmcia/ds.h>
100
101 /* Time in jiffies before concluding Tx hung */
102 #define TX_TIMEOUT ((400*HZ)/1000)
103
104 /****************
105 * Some constants used to access the hardware
106 */
107
108 /* Register offsets and value constans */
109 #define XIRCREG_CR 0 /* Command register (wr) */
110 enum xirc_cr {
111 TransmitPacket = 0x01,
112 SoftReset = 0x02,
113 EnableIntr = 0x04,
114 ForceIntr = 0x08,
115 ClearTxFIFO = 0x10,
116 ClearRxOvrun = 0x20,
117 RestartTx = 0x40
118 };
119 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
120 enum xirc_esr {
121 FullPktRcvd = 0x01, /* full packet in receive buffer */
122 PktRejected = 0x04, /* a packet has been rejected */
123 TxPktPend = 0x08, /* TX Packet Pending */
124 IncorPolarity = 0x10,
125 MediaSelect = 0x20 /* set if TP, clear if AUI */
126 };
127 #define XIRCREG_PR 1 /* Page Register select */
128 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
129 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
130 enum xirc_isr {
131 TxBufOvr = 0x01, /* TX Buffer Overflow */
132 PktTxed = 0x02, /* Packet Transmitted */
133 MACIntr = 0x04, /* MAC Interrupt occurred */
134 TxResGrant = 0x08, /* Tx Reservation Granted */
135 RxFullPkt = 0x20, /* Rx Full Packet */
136 RxPktRej = 0x40, /* Rx Packet Rejected */
137 ForcedIntr= 0x80 /* Forced Interrupt */
138 };
139 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
140 #define XIRCREG1_IMR1 13
141 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
142 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
143 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
144 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
145 enum xirc_rsr {
146 PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
147 BrdcstPkt = 0x02, /* set if it is a broadcast packet */
148 PktTooLong = 0x04, /* set if packet length > 1518 */
149 AlignErr = 0x10, /* incorrect CRC and last octet not complete */
150 CRCErr = 0x20, /* incorrect CRC and last octet is complete */
151 PktRxOk = 0x80 /* received ok */
152 };
153 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
154 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
155 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
156 enum xirc_ecr {
157 FullDuplex = 0x04, /* enable full duplex mode */
158 LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
159 DisablePolCor = 0x10,/* disable auto polarity correction */
160 DisableLinkPulse = 0x20, /* disable link pulse generation */
161 DisableAutoTx = 0x40, /* disable auto-transmit */
162 };
163 #define XIRCREG2_RBS 8 /* receive buffer start register */
164 #define XIRCREG2_LED 10 /* LED Configuration register */
165 /* values for the leds: Bits 2-0 for led 1
166 * 0 disabled Bits 5-3 for led 2
167 * 1 collision
168 * 2 noncollision
169 * 3 link_detected
170 * 4 incor_polarity
171 * 5 jabber
172 * 6 auto_assertion
173 * 7 rx_tx_activity
174 */
175 #define XIRCREG2_MSR 12 /* Mohawk specific register */
176
177 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
178 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
179 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
180 #define XIRCREG4_BOV 10 /* Bonding Version Register */
181 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
182 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
183 /* MAC register can only by accessed with 8 bit operations */
184 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
185 enum xirc_cmd { /* Commands */
186 Transmit = 0x01,
187 EnableRecv = 0x04,
188 DisableRecv = 0x08,
189 Abort = 0x10,
190 Online = 0x20,
191 IntrAck = 0x40,
192 Offline = 0x80
193 };
194 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
195 #define XIRCREG40_RXST0 9 /* Receive Status Register */
196 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
197 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
198 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
199 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
200 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
201 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
202 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
203 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
204 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
205 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
206 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
207 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
208 #define XIRCREG45_REV 15 /* Revision Register (rd) */
209 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
210
211 static char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
212
213 /****************
214 * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
215 * you do not define PCMCIA_DEBUG at all, all the debug code will be
216 * left out. If you compile with PCMCIA_DEBUG=0, the debug code will
217 * be present but disabled -- but it can then be enabled for specific
218 * modules at load time with a 'pc_debug=#' option to insmod.
219 */
220 #ifdef PCMCIA_DEBUG
221 static int pc_debug = PCMCIA_DEBUG;
222 MODULE_PARM(pc_debug, "i");
223 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
224 #else
225 #define DEBUG(n, args...)
226 #endif
227 static char *version =
228 "xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)";
229 /* !--- CVS revision */
230 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
231 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
232 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
233 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
234 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
235
236 /* card types */
237 #define XIR_UNKNOWN 0 /* unknown: not supported */
238 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
239 #define XIR_CE2 2 /* (prodid 2) */
240 #define XIR_CE3 3 /* (prodid 3) */
241 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
242 #define XIR_CEM2 5 /* (prodid 2) */
243 #define XIR_CEM3 6 /* (prodid 3) */
244 #define XIR_CEM33 7 /* (prodid 4) */
245 #define XIR_CEM56M 8 /* (prodid 5) */
246 #define XIR_CEM56 9 /* (prodid 6) */
247 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
248 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
249 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
250 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
251 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
252 /*====================================================================*/
253
254 /* Module parameters */
255
256 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
257 MODULE_LICENSE("Dual MPL/GPL");
258
259 #define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i")
260
261 static int irq_list[4] = { -1 };
262 MODULE_PARM(irq_list, "1-4i");
263 INT_MODULE_PARM(irq_mask, 0xdeb8);
264 INT_MODULE_PARM(if_port, 0);
265 INT_MODULE_PARM(full_duplex, 0);
266 INT_MODULE_PARM(do_sound, 1);
267 INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
268
269 /*====================================================================*/
270
271 /* We do not process more than these number of bytes during one
272 * interrupt. (Of course we receive complete packets, so this is not
273 * an exact value).
274 * Something between 2000..22000; first value gives best interrupt latency,
275 * the second enables the usage of the complete on-chip buffer. We use the
276 * high value as the initial value.
277 */
278 static unsigned maxrx_bytes = 22000;
279
280 /* MII management prototypes */
281 static void mii_idle(ioaddr_t ioaddr);
282 static void mii_putbit(ioaddr_t ioaddr, unsigned data);
283 static int mii_getbit(ioaddr_t ioaddr);
284 static void mii_wbits(ioaddr_t ioaddr, unsigned data, int len);
285 static unsigned mii_rd(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg);
286 static void mii_wr(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg,
287 unsigned data, int len);
288
289 /*
290 * The event() function is this driver's Card Services event handler.
291 * It will be called by Card Services when an appropriate card status
292 * event is received. The config() and release() entry points are
293 * used to configure or release a socket, in response to card insertion
294 * and ejection events. They are invoked from the event handler.
295 */
296
297 static int has_ce2_string(dev_link_t * link);
298 static void xirc2ps_config(dev_link_t * link);
299 static void xirc2ps_release(u_long arg);
300 static int xirc2ps_event(event_t event, int priority,
301 event_callback_args_t * args);
302
303 /****************
304 * The attach() and detach() entry points are used to create and destroy
305 * "instances" of the driver, where each instance represents everything
306 * needed to manage one actual PCMCIA card.
307 */
308
309 static dev_link_t *xirc2ps_attach(void);
310 static void xirc2ps_detach(dev_link_t *);
311
312 /****************
313 * You'll also need to prototype all the functions that will actually
314 * be used to talk to your device. See 'pcmem_cs' for a good example
315 * of a fully self-sufficient driver; the other drivers rely more or
316 * less on other parts of the kernel.
317 */
318
319 static void xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs);
320
321 /*
322 * The dev_info variable is the "key" that is used to match up this
323 * device driver with appropriate cards, through the card configuration
324 * database.
325 */
326
327 static dev_info_t dev_info = "xirc2ps_cs";
328
329 /****************
330 * A linked list of "instances" of the device. Each actual
331 * PCMCIA card corresponds to one device instance, and is described
332 * by one dev_link_t structure (defined in ds.h).
333 *
334 * You may not want to use a linked list for this -- for example, the
335 * memory card driver uses an array of dev_link_t pointers, where minor
336 * device numbers are used to derive the corresponding array index.
337 */
338
339 static dev_link_t *dev_list = NULL;
340
341 /****************
342 * A dev_link_t structure has fields for most things that are needed
343 * to keep track of a socket, but there will usually be some device
344 * specific information that also needs to be kept track of. The
345 * 'priv' pointer in a dev_link_t structure can be used to point to
346 * a device-specific private data structure, like this.
347 *
348 * A driver needs to provide a dev_node_t structure for each device
349 * on a card. In some cases, there is only one device per card (for
350 * example, ethernet cards, modems). In other cases, there may be
351 * many actual or logical devices (SCSI adapters, memory cards with
352 * multiple partitions). The dev_node_t structures need to be kept
353 * in a linked list starting at the 'dev' field of a dev_link_t
354 * structure. We allocate them in the card's private data structure,
355 * because they generally can't be allocated dynamically.
356 */
357
358 typedef struct local_info_t {
359 dev_link_t link;
360 struct net_device dev;
361 dev_node_t node;
362 struct net_device_stats stats;
363 int card_type;
364 int probe_port;
365 int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
366 int mohawk; /* a CE3 type card */
367 int dingo; /* a CEM56 type card */
368 int new_mii; /* has full 10baseT/100baseT MII */
369 int modem; /* is a multi function card (i.e with a modem) */
370 caddr_t dingo_ccr; /* only used for CEM56 cards */
371 unsigned last_ptr_value; /* last packets transmitted value */
372 const char *manf_str;
373 } local_info_t;
374
375 /****************
376 * Some more prototypes
377 */
378 static int do_start_xmit(struct sk_buff *skb, struct net_device *dev);
379 static void do_tx_timeout(struct net_device *dev);
380 static struct net_device_stats *do_get_stats(struct net_device *dev);
381 static void set_addresses(struct net_device *dev);
382 static void set_multicast_list(struct net_device *dev);
383 static int set_card_type(dev_link_t *link, const void *s);
384 static int do_config(struct net_device *dev, struct ifmap *map);
385 static int do_open(struct net_device *dev);
386 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
387 static void hardreset(struct net_device *dev);
388 static void do_reset(struct net_device *dev, int full);
389 static int init_mii(struct net_device *dev);
390 static void do_powerdown(struct net_device *dev);
391 static int do_stop(struct net_device *dev);
392
393
394 /*=============== Helper functions =========================*/
395 static void
396 flush_stale_links(void)
397 {
398 dev_link_t *link, *next;
399 for (link = dev_list; link; link = next) {
400 next = link->next;
401 if (link->state & DEV_STALE_LINK)
402 xirc2ps_detach(link);
403 }
404 }
405
406 static void
407 cs_error(client_handle_t handle, int func, int ret)
408 {
409 error_info_t err = { func, ret };
410 CardServices(ReportError, handle, &err);
411 }
412
413 static int
414 get_tuple_data(int fn, client_handle_t handle, tuple_t *tuple)
415 {
416 int err;
417
418 if ((err=CardServices(fn, handle, tuple)))
419 return err;
420 return CardServices(GetTupleData, handle, tuple);
421 }
422
423 static int
424 get_tuple(int fn, client_handle_t handle, tuple_t *tuple, cisparse_t *parse)
425 {
426 int err;
427
428 if ((err=get_tuple_data(fn, handle, tuple)))
429 return err;
430 return CardServices(ParseTuple, handle, tuple, parse);
431 }
432
433 #define first_tuple(a, b, c) get_tuple(GetFirstTuple, a, b, c)
434 #define next_tuple(a, b, c) get_tuple(GetNextTuple, a, b, c)
435
436 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
437 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
438 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
439 #define PutByte(reg,value) outb((value), ioaddr+(reg))
440 #define PutWord(reg,value) outw((value), ioaddr+(reg))
441
442 static void
443 busy_loop(u_long len)
444 {
445 #ifdef MACH
446 /* TODO: Is this really what we want? */
447 __udelay(1000000 / HZ * len);
448 #else
449 if (in_interrupt()) {
450 u_long timeout = jiffies + len;
451 u_long flags;
452 save_flags(flags);
453 sti();
454 while (timeout >= jiffies)
455 ;
456 restore_flags(flags);
457 } else {
458 __set_current_state(TASK_UNINTERRUPTIBLE);
459 schedule_timeout(len);
460 }
461 #endif
462 }
463
464
465 /*====== Functions used for debugging =================================*/
466 #if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
467 static void
468 PrintRegisters(struct net_device *dev)
469 {
470 ioaddr_t ioaddr = dev->base_addr;
471
472 if (pc_debug > 1) {
473 int i, page;
474
475 printk(KDBG_XIRC "Register common: ");
476 for (i = 0; i < 8; i++)
477 printk(" %2.2x", GetByte(i));
478 printk("\n");
479 for (page = 0; page <= 8; page++) {
480 printk(KDBG_XIRC "Register page %2x: ", page);
481 SelectPage(page);
482 for (i = 8; i < 16; i++)
483 printk(" %2.2x", GetByte(i));
484 printk("\n");
485 }
486 for (page=0x40 ; page <= 0x5f; page++) {
487 if (page == 0x43 || (page >= 0x46 && page <= 0x4f)
488 || (page >= 0x51 && page <=0x5e))
489 continue;
490 printk(KDBG_XIRC "Register page %2x: ", page);
491 SelectPage(page);
492 for (i = 8; i < 16; i++)
493 printk(" %2.2x", GetByte(i));
494 printk("\n");
495 }
496 }
497 }
498 #endif /* PCMCIA_DEBUG */
499
500 /*============== MII Management functions ===============*/
501
502 /****************
503 * Turn around for read
504 */
505 static void
506 mii_idle(ioaddr_t ioaddr)
507 {
508 PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
509 udelay(1);
510 PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
511 udelay(1);
512 }
513
514 /****************
515 * Write a bit to MDI/O
516 */
517 static void
518 mii_putbit(ioaddr_t ioaddr, unsigned data)
519 {
520 #if 1
521 if (data) {
522 PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
523 udelay(1);
524 PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
525 udelay(1);
526 } else {
527 PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
528 udelay(1);
529 PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
530 udelay(1);
531 }
532 #else
533 if (data) {
534 PutWord(XIRCREG2_GPR2-1, 0x0e0e);
535 udelay(1);
536 PutWord(XIRCREG2_GPR2-1, 0x0f0f);
537 udelay(1);
538 } else {
539 PutWord(XIRCREG2_GPR2-1, 0x0c0c);
540 udelay(1);
541 PutWord(XIRCREG2_GPR2-1, 0x0d0d);
542 udelay(1);
543 }
544 #endif
545 }
546
547 /****************
548 * Get a bit from MDI/O
549 */
550 static int
551 mii_getbit(ioaddr_t ioaddr)
552 {
553 unsigned d;
554
555 PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
556 udelay(1);
557 d = GetByte(XIRCREG2_GPR2); /* read MDIO */
558 PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
559 udelay(1);
560 return d & 0x20; /* read MDIO */
561 }
562
563 static void
564 mii_wbits(ioaddr_t ioaddr, unsigned data, int len)
565 {
566 unsigned m = 1 << (len-1);
567 for (; m; m >>= 1)
568 mii_putbit(ioaddr, data & m);
569 }
570
571 static unsigned
572 mii_rd(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg)
573 {
574 int i;
575 unsigned data=0, m;
576
577 SelectPage(2);
578 for (i=0; i < 32; i++) /* 32 bit preamble */
579 mii_putbit(ioaddr, 1);
580 mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
581 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
582 mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
583 mii_idle(ioaddr); /* turn around */
584 mii_getbit(ioaddr);
585
586 for (m = 1<<15; m; m >>= 1)
587 if (mii_getbit(ioaddr))
588 data |= m;
589 mii_idle(ioaddr);
590 return data;
591 }
592
593 static void
594 mii_wr(ioaddr_t ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len)
595 {
596 int i;
597
598 SelectPage(2);
599 for (i=0; i < 32; i++) /* 32 bit preamble */
600 mii_putbit(ioaddr, 1);
601 mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
602 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
603 mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
604 mii_putbit(ioaddr, 1); /* turn around */
605 mii_putbit(ioaddr, 0);
606 mii_wbits(ioaddr, data, len); /* And write the data */
607 mii_idle(ioaddr);
608 }
609
610 /*============= Main bulk of functions =========================*/
611
612 /****************
613 * xirc2ps_attach() creates an "instance" of the driver, allocating
614 * local data structures for one device. The device is registered
615 * with Card Services.
616 *
617 * The dev_link structure is initialized, but we don't actually
618 * configure the card at this point -- we wait until we receive a
619 * card insertion event.
620 */
621
622 static dev_link_t *
623 xirc2ps_attach(void)
624 {
625 client_reg_t client_reg;
626 dev_link_t *link;
627 struct net_device *dev;
628 local_info_t *local;
629 int err;
630
631 DEBUG(0, "attach()\n");
632 flush_stale_links();
633
634 /* Allocate the device structure */
635 local = kmalloc(sizeof(*local), GFP_KERNEL);
636 if (!local) return NULL;
637 memset(local, 0, sizeof(*local));
638 link = &local->link; dev = &local->dev;
639 link->priv = dev->priv = local;
640
641 init_timer(&link->release);
642 link->release.function = &xirc2ps_release;
643 link->release.data = (u_long) link;
644
645 /* General socket configuration */
646 link->conf.Attributes = CONF_ENABLE_IRQ;
647 link->conf.Vcc = 50;
648 link->conf.IntType = INT_MEMORY_AND_IO;
649 link->conf.ConfigIndex = 1;
650 link->conf.Present = PRESENT_OPTION;
651 link->irq.Handler = xirc2ps_interrupt;
652 link->irq.Instance = dev;
653
654 /* Fill in card specific entries */
655 dev->hard_start_xmit = &do_start_xmit;
656 dev->set_config = &do_config;
657 dev->get_stats = &do_get_stats;
658 dev->do_ioctl = &do_ioctl;
659 dev->set_multicast_list = &set_multicast_list;
660 ether_setup(dev);
661 init_dev_name(dev, local->node);
662 dev->open = &do_open;
663 dev->stop = &do_stop;
664 #ifdef HAVE_TX_TIMEOUT
665 dev->tx_timeout = do_tx_timeout;
666 dev->watchdog_timeo = TX_TIMEOUT;
667 #endif
668
669 /* Register with Card Services */
670 link->next = dev_list;
671 dev_list = link;
672 client_reg.dev_info = &dev_info;
673 client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
674 client_reg.EventMask =
675 CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
676 CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
677 CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
678 client_reg.event_handler = &xirc2ps_event;
679 client_reg.Version = 0x0210;
680 client_reg.event_callback_args.client_data = link;
681 if ((err = CardServices(RegisterClient, &link->handle, &client_reg))) {
682 cs_error(link->handle, RegisterClient, err);
683 xirc2ps_detach(link);
684 return NULL;
685 }
686
687 return link;
688 } /* xirc2ps_attach */
689
690 /****************
691 * This deletes a driver "instance". The device is de-registered
692 * with Card Services. If it has been released, all local data
693 * structures are freed. Otherwise, the structures will be freed
694 * when the device is released.
695 */
696
697 static void
698 xirc2ps_detach(dev_link_t * link)
699 {
700 local_info_t *local = link->priv;
701 dev_link_t **linkp;
702
703 DEBUG(0, "detach(0x%p)\n", link);
704
705 /* Locate device structure */
706 for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
707 if (*linkp == link)
708 break;
709 if (!*linkp) {
710 DEBUG(0, "detach(0x%p): dev_link lost\n", link);
711 return;
712 }
713
714 /*
715 * If the device is currently configured and active, we won't
716 * actually delete it yet. Instead, it is marked so that when
717 * the release() function is called, that will trigger a proper
718 * detach().
719 */
720 del_timer(&link->release);
721 if (link->state & DEV_CONFIG) {
722 DEBUG(0, "detach postponed, '%s' still locked\n",
723 link->dev->dev_name);
724 link->state |= DEV_STALE_LINK;
725 return;
726 }
727
728 /* Break the link with Card Services */
729 if (link->handle)
730 CardServices(DeregisterClient, link->handle);
731
732 /* Unlink device structure, free it */
733 *linkp = link->next;
734 if (link->dev)
735 unregister_netdev(&local->dev);
736 kfree(local);
737
738 } /* xirc2ps_detach */
739
740 /****************
741 * Detect the type of the card. s is the buffer with the data of tuple 0x20
742 * Returns: 0 := not supported
743 * mediaid=11 and prodid=47
744 * Media-Id bits:
745 * Ethernet 0x01
746 * Tokenring 0x02
747 * Arcnet 0x04
748 * Wireless 0x08
749 * Modem 0x10
750 * GSM only 0x20
751 * Prod-Id bits:
752 * Pocket 0x10
753 * External 0x20
754 * Creditcard 0x40
755 * Cardbus 0x80
756 *
757 */
758 static int
759 set_card_type(dev_link_t *link, const void *s)
760 {
761 local_info_t *local = link->priv;
762 #ifdef PCMCIA_DEBUG
763 unsigned cisrev = ((const unsigned char *)s)[2];
764 #endif
765 unsigned mediaid= ((const unsigned char *)s)[3];
766 unsigned prodid = ((const unsigned char *)s)[4];
767
768 DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
769 cisrev, mediaid, prodid);
770
771 local->mohawk = 0;
772 local->dingo = 0;
773 local->modem = 0;
774 local->card_type = XIR_UNKNOWN;
775 if (!(prodid & 0x40)) {
776 printk(KNOT_XIRC "Ooops: Not a creditcard\n");
777 return 0;
778 }
779 if (!(mediaid & 0x01)) {
780 printk(KNOT_XIRC "Not an Ethernet card\n");
781 return 0;
782 }
783 if (mediaid & 0x10) {
784 local->modem = 1;
785 switch(prodid & 15) {
786 case 1: local->card_type = XIR_CEM ; break;
787 case 2: local->card_type = XIR_CEM2 ; break;
788 case 3: local->card_type = XIR_CEM3 ; break;
789 case 4: local->card_type = XIR_CEM33 ; break;
790 case 5: local->card_type = XIR_CEM56M;
791 local->mohawk = 1;
792 break;
793 case 6:
794 case 7: /* 7 is the RealPort 10/56 */
795 local->card_type = XIR_CEM56 ;
796 local->mohawk = 1;
797 local->dingo = 1;
798 break;
799 }
800 } else {
801 switch(prodid & 15) {
802 case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
803 break;
804 case 15:
805 case 2: local->card_type = XIR_CE2; break;
806 case 3: local->card_type = XIR_CE3;
807 local->mohawk = 1;
808 break;
809 }
810 }
811 if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
812 printk(KNOT_XIRC "Sorry, this is an old CE card\n");
813 return 0;
814 }
815 if (local->card_type == XIR_UNKNOWN)
816 printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
817 mediaid, prodid);
818
819 return 1;
820 }
821
822 /****************
823 * There are some CE2 cards out which claim to be a CE card.
824 * This function looks for a "CE2" in the 3rd version field.
825 * Returns: true if this is a CE2
826 */
827 static int
828 has_ce2_string(dev_link_t * link)
829 {
830 client_handle_t handle = link->handle;
831 tuple_t tuple;
832 cisparse_t parse;
833 u_char buf[256];
834
835 tuple.Attributes = 0;
836 tuple.TupleData = buf;
837 tuple.TupleDataMax = 254;
838 tuple.TupleOffset = 0;
839 tuple.DesiredTuple = CISTPL_VERS_1;
840 if (!first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 2) {
841 if (strstr(parse.version_1.str + parse.version_1.ofs[2], "CE2"))
842 return 1;
843 }
844 return 0;
845 }
846
847 /****************
848 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
849 * is received, to configure the PCMCIA socket, and to make the
850 * ethernet device available to the system.
851 */
852 static void
853 xirc2ps_config(dev_link_t * link)
854 {
855 client_handle_t handle = link->handle;
856 local_info_t *local = link->priv;
857 struct net_device *dev = &local->dev;
858 tuple_t tuple;
859 cisparse_t parse;
860 ioaddr_t ioaddr;
861 int err, i;
862 u_char buf[64];
863 cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
864 cistpl_cftable_entry_t *cf = &parse.cftable_entry;
865
866 local->dingo_ccr = 0;
867
868 DEBUG(0, "config(0x%p)\n", link);
869
870 /*
871 * This reads the card's CONFIG tuple to find its configuration
872 * registers.
873 */
874 tuple.Attributes = 0;
875 tuple.TupleData = buf;
876 tuple.TupleDataMax = 64;
877 tuple.TupleOffset = 0;
878
879 /* Is this a valid card */
880 tuple.DesiredTuple = CISTPL_MANFID;
881 if ((err=first_tuple(handle, &tuple, &parse))) {
882 printk(KNOT_XIRC "manfid not found in CIS\n");
883 goto failure;
884 }
885
886 switch(parse.manfid.manf) {
887 case MANFID_XIRCOM:
888 local->manf_str = "Xircom";
889 break;
890 case MANFID_ACCTON:
891 local->manf_str = "Accton";
892 break;
893 case MANFID_COMPAQ:
894 case MANFID_COMPAQ2:
895 local->manf_str = "Compaq";
896 break;
897 case MANFID_INTEL:
898 local->manf_str = "Intel";
899 break;
900 case MANFID_TOSHIBA:
901 local->manf_str = "Toshiba";
902 break;
903 default:
904 printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
905 (unsigned)parse.manfid.manf);
906 goto failure;
907 }
908 DEBUG(0, "found %s card\n", local->manf_str);
909
910 if (!set_card_type(link, buf)) {
911 printk(KNOT_XIRC "this card is not supported\n");
912 goto failure;
913 }
914
915 /* get configuration stuff */
916 tuple.DesiredTuple = CISTPL_CONFIG;
917 if ((err=first_tuple(handle, &tuple, &parse)))
918 goto cis_error;
919 link->conf.ConfigBase = parse.config.base;
920 link->conf.Present = parse.config.rmask[0];
921
922 /* get the ethernet address from the CIS */
923 tuple.DesiredTuple = CISTPL_FUNCE;
924 for (err = first_tuple(handle, &tuple, &parse); !err;
925 err = next_tuple(handle, &tuple, &parse)) {
926 /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries:
927 * the first one with a length of zero the second correct -
928 * so I skip all entries with length 0 */
929 if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID
930 && ((cistpl_lan_node_id_t *)parse.funce.data)->nb)
931 break;
932 }
933 if (err) { /* not found: try to get the node-id from tuple 0x89 */
934 tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */
935 if (!(err = get_tuple_data(GetFirstTuple, handle, &tuple))) {
936 if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID)
937 memcpy(&parse, buf, 8);
938 else
939 err = -1;
940 }
941 }
942 if (err) { /* another try (James Lehmer's CE2 version 4.1)*/
943 tuple.DesiredTuple = CISTPL_FUNCE;
944 for (err = first_tuple(handle, &tuple, &parse); !err;
945 err = next_tuple(handle, &tuple, &parse)) {
946 if (parse.funce.type == 0x02 && parse.funce.data[0] == 1
947 && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) {
948 buf[1] = 4;
949 memcpy(&parse, buf+1, 8);
950 break;
951 }
952 }
953 }
954 if (err) {
955 printk(KNOT_XIRC "node-id not found in CIS\n");
956 goto failure;
957 }
958 node_id = (cistpl_lan_node_id_t *)parse.funce.data;
959 if (node_id->nb != 6) {
960 printk(KNOT_XIRC "malformed node-id in CIS\n");
961 goto failure;
962 }
963 for (i=0; i < 6; i++)
964 dev->dev_addr[i] = node_id->id[i];
965
966 /* Configure card */
967 link->state |= DEV_CONFIG;
968
969 link->io.IOAddrLines =10;
970 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
971 link->irq.Attributes = IRQ_HANDLE_PRESENT;
972 link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
973 if (irq_list[0] == -1)
974 link->irq.IRQInfo2 = irq_mask;
975 else {
976 for (i = 0; i < 4; i++)
977 link->irq.IRQInfo2 |= 1 << irq_list[i];
978 }
979 if (local->modem) {
980 int pass;
981
982 if (do_sound) {
983 link->conf.Attributes |= CONF_ENABLE_SPKR;
984 link->conf.Status |= CCSR_AUDIO_ENA;
985 }
986 link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED ;
987 link->io.NumPorts2 = 8;
988 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
989 if (local->dingo) {
990 /* Take the Modem IO port from the CIS and scan for a free
991 * Ethernet port */
992 link->io.NumPorts1 = 16; /* no Mako stuff anymore */
993 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
994 for (err = first_tuple(handle, &tuple, &parse); !err;
995 err = next_tuple(handle, &tuple, &parse)) {
996 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
997 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
998 link->conf.ConfigIndex = cf->index ;
999 link->io.BasePort2 = cf->io.win[0].base;
1000 link->io.BasePort1 = ioaddr;
1001 if (!(err=CardServices(RequestIO, link->handle,
1002 &link->io)))
1003 goto port_found;
1004 }
1005 }
1006 }
1007 } else {
1008 link->io.NumPorts1 = 18;
1009 /* We do 2 passes here: The first one uses the regular mapping and
1010 * the second tries again, thereby considering that the 32 ports are
1011 * mirrored every 32 bytes. Actually we use a mirrored port for
1012 * the Mako if (on the first pass) the COR bit 5 is set.
1013 */
1014 for (pass=0; pass < 2; pass++) {
1015 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
1016 for (err = first_tuple(handle, &tuple, &parse); !err;
1017 err = next_tuple(handle, &tuple, &parse)){
1018 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){
1019 link->conf.ConfigIndex = cf->index ;
1020 link->io.BasePort2 = cf->io.win[0].base;
1021 link->io.BasePort1 = link->io.BasePort2
1022 + (pass ? (cf->index & 0x20 ? -24:8)
1023 : (cf->index & 0x20 ? 8:-24));
1024 if (!(err=CardServices(RequestIO, link->handle,
1025 &link->io)))
1026 goto port_found;
1027 }
1028 }
1029 }
1030 /* if special option:
1031 * try to configure as Ethernet only.
1032 * .... */
1033 }
1034 printk(KNOT_XIRC "no ports available\n");
1035 } else {
1036 link->irq.Attributes |= IRQ_TYPE_EXCLUSIVE;
1037 link->io.NumPorts1 = 16;
1038 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
1039 link->io.BasePort1 = ioaddr;
1040 if (!(err=CardServices(RequestIO, link->handle, &link->io)))
1041 goto port_found;
1042 }
1043 link->io.BasePort1 = 0; /* let CS decide */
1044 if ((err=CardServices(RequestIO, link->handle, &link->io))) {
1045 cs_error(link->handle, RequestIO, err);
1046 goto config_error;
1047 }
1048 }
1049 port_found:
1050 if (err)
1051 goto config_error;
1052
1053 /****************
1054 * Now allocate an interrupt line. Note that this does not
1055 * actually assign a handler to the interrupt.
1056 */
1057 if ((err=CardServices(RequestIRQ, link->handle, &link->irq))) {
1058 cs_error(link->handle, RequestIRQ, err);
1059 goto config_error;
1060 }
1061
1062 /****************
1063 * This actually configures the PCMCIA socket -- setting up
1064 * the I/O windows and the interrupt mapping.
1065 */
1066 if ((err=CardServices(RequestConfiguration,
1067 link->handle, &link->conf))) {
1068 cs_error(link->handle, RequestConfiguration, err);
1069 goto config_error;
1070 }
1071
1072 if (local->dingo) {
1073 conf_reg_t reg;
1074 win_req_t req;
1075 memreq_t mem;
1076
1077 /* Reset the modem's BAR to the correct value
1078 * This is necessary because in the RequestConfiguration call,
1079 * the base address of the ethernet port (BasePort1) is written
1080 * to the BAR registers of the modem.
1081 */
1082 reg.Action = CS_WRITE;
1083 reg.Offset = CISREG_IOBASE_0;
1084 reg.Value = link->io.BasePort2 & 0xff;
1085 if ((err = CardServices(AccessConfigurationRegister, link->handle,
1086 &reg))) {
1087 cs_error(link->handle, AccessConfigurationRegister, err);
1088 goto config_error;
1089 }
1090 reg.Action = CS_WRITE;
1091 reg.Offset = CISREG_IOBASE_1;
1092 reg.Value = (link->io.BasePort2 >> 8) & 0xff;
1093 if ((err = CardServices(AccessConfigurationRegister, link->handle,
1094 &reg))) {
1095 cs_error(link->handle, AccessConfigurationRegister, err);
1096 goto config_error;
1097 }
1098
1099 /* There is no config entry for the Ethernet part which
1100 * is at 0x0800. So we allocate a window into the attribute
1101 * memory and write direct to the CIS registers
1102 */
1103 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
1104 req.Base = req.Size = 0;
1105 req.AccessSpeed = 0;
1106 link->win = (window_handle_t)link->handle;
1107 if ((err = CardServices(RequestWindow, &link->win, &req))) {
1108 cs_error(link->handle, RequestWindow, err);
1109 goto config_error;
1110 }
1111 local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
1112 mem.CardOffset = 0x0;
1113 mem.Page = 0;
1114 if ((err = CardServices(MapMemPage, link->win, &mem))) {
1115 cs_error(link->handle, MapMemPage, err);
1116 goto config_error;
1117 }
1118
1119 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
1120 * part.
1121 */
1122 writeb(0x47, local->dingo_ccr + CISREG_COR);
1123 ioaddr = link->io.BasePort1;
1124 writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
1125 writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
1126
1127 #if 0
1128 {
1129 u_char tmp;
1130 printk(KERN_INFO "ECOR:");
1131 for (i=0; i < 7; i++) {
1132 tmp = readb(local->dingo_ccr + i*2);
1133 printk(" %02x", tmp);
1134 }
1135 printk("\n");
1136 printk(KERN_INFO "DCOR:");
1137 for (i=0; i < 4; i++) {
1138 tmp = readb(local->dingo_ccr + 0x20 + i*2);
1139 printk(" %02x", tmp);
1140 }
1141 printk("\n");
1142 printk(KERN_INFO "SCOR:");
1143 for (i=0; i < 10; i++) {
1144 tmp = readb(local->dingo_ccr + 0x40 + i*2);
1145 printk(" %02x", tmp);
1146 }
1147 printk("\n");
1148 }
1149 #endif
1150
1151 writeb(0x01, local->dingo_ccr + 0x20);
1152 writeb(0x0c, local->dingo_ccr + 0x22);
1153 writeb(0x00, local->dingo_ccr + 0x24);
1154 writeb(0x00, local->dingo_ccr + 0x26);
1155 writeb(0x00, local->dingo_ccr + 0x28);
1156 }
1157
1158 /* The if_port symbol can be set when the module is loaded */
1159 local->probe_port=0;
1160 if (!if_port) {
1161 local->probe_port = dev->if_port = 1;
1162 } else if ((if_port >= 1 && if_port <= 2) ||
1163 (local->mohawk && if_port==4))
1164 dev->if_port = if_port;
1165 else
1166 printk(KNOT_XIRC "invalid if_port requested\n");
1167
1168 /* we can now register the device with the net subsystem */
1169 dev->irq = link->irq.AssignedIRQ;
1170 dev->base_addr = link->io.BasePort1;
1171 if ((err=register_netdev(dev))) {
1172 printk(KNOT_XIRC "register_netdev() failed\n");
1173 goto config_error;
1174 }
1175
1176 copy_dev_name(local->node, dev);
1177 link->dev = &local->node;
1178 link->state &= ~DEV_CONFIG_PENDING;
1179
1180 if (local->dingo)
1181 do_reset(dev, 1); /* a kludge to make the cem56 work */
1182
1183 /* give some infos about the hardware */
1184 printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr",
1185 dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq);
1186 for (i = 0; i < 6; i++)
1187 printk("%c%02X", i?':':' ', dev->dev_addr[i]);
1188 printk("\n");
1189
1190 return;
1191
1192 config_error:
1193 link->state &= ~DEV_CONFIG_PENDING;
1194 xirc2ps_release((u_long)link);
1195 return;
1196
1197 cis_error:
1198 printk(KNOT_XIRC "unable to parse CIS\n");
1199 failure:
1200 link->state &= ~DEV_CONFIG_PENDING;
1201 } /* xirc2ps_config */
1202
1203 /****************
1204 * After a card is removed, xirc2ps_release() will unregister the net
1205 * device, and release the PCMCIA configuration. If the device is
1206 * still open, this will be postponed until it is closed.
1207 */
1208 static void
1209 xirc2ps_release(u_long arg)
1210 {
1211 dev_link_t *link = (dev_link_t *) arg;
1212 local_info_t *local = link->priv;
1213 struct net_device *dev = &local->dev;
1214
1215 DEBUG(0, "release(0x%p)\n", link);
1216
1217 /*
1218 * If the device is currently in use, we won't release until it
1219 * is actually closed.
1220 */
1221 if (link->open) {
1222 DEBUG(0, "release postponed, '%s' "
1223 "still open\n", link->dev->dev_name);
1224 link->state |= DEV_STALE_CONFIG;
1225 return;
1226 }
1227
1228 if (link->win) {
1229 local_info_t *local = dev->priv;
1230 if (local->dingo)
1231 iounmap(local->dingo_ccr - 0x0800);
1232 CardServices(ReleaseWindow, link->win);
1233 }
1234 CardServices(ReleaseConfiguration, link->handle);
1235 CardServices(ReleaseIO, link->handle, &link->io);
1236 CardServices(ReleaseIRQ, link->handle, &link->irq);
1237 link->state &= ~DEV_CONFIG;
1238
1239 } /* xirc2ps_release */
1240
1241 /*====================================================================*/
1242
1243 /****************
1244 * The card status event handler. Mostly, this schedules other
1245 * stuff to run after an event is received. A CARD_REMOVAL event
1246 * also sets some flags to discourage the net drivers from trying
1247 * to talk to the card any more.
1248 *
1249 * When a CARD_REMOVAL event is received, we immediately set a flag
1250 * to block future accesses to this device. All the functions that
1251 * actually access the device should check this flag to make sure
1252 * the card is still present.
1253 */
1254
1255 static int
1256 xirc2ps_event(event_t event, int priority,
1257 event_callback_args_t * args)
1258 {
1259 dev_link_t *link = args->client_data;
1260 local_info_t *lp = link->priv;
1261 struct net_device *dev = &lp->dev;
1262
1263 DEBUG(0, "event(%d)\n", (int)event);
1264
1265 switch (event) {
1266 case CS_EVENT_REGISTRATION_COMPLETE:
1267 DEBUG(0, "registration complete\n");
1268 break;
1269 case CS_EVENT_CARD_REMOVAL:
1270 link->state &= ~DEV_PRESENT;
1271 if (link->state & DEV_CONFIG) {
1272 netif_device_detach(dev);
1273 mod_timer(&link->release, jiffies + HZ/20);
1274 }
1275 break;
1276 case CS_EVENT_CARD_INSERTION:
1277 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
1278 xirc2ps_config(link);
1279 break;
1280 case CS_EVENT_PM_SUSPEND:
1281 link->state |= DEV_SUSPEND;
1282 /* Fall through... */
1283 case CS_EVENT_RESET_PHYSICAL:
1284 if (link->state & DEV_CONFIG) {
1285 if (link->open) {
1286 netif_device_detach(dev);
1287 do_powerdown(dev);
1288 }
1289 CardServices(ReleaseConfiguration, link->handle);
1290 }
1291 break;
1292 case CS_EVENT_PM_RESUME:
1293 link->state &= ~DEV_SUSPEND;
1294 /* Fall through... */
1295 case CS_EVENT_CARD_RESET:
1296 if (link->state & DEV_CONFIG) {
1297 CardServices(RequestConfiguration, link->handle, &link->conf);
1298 if (link->open) {
1299 do_reset(dev,1);
1300 netif_device_attach(dev);
1301 }
1302 }
1303 break;
1304 }
1305 return 0;
1306 } /* xirc2ps_event */
1307
1308 /*====================================================================*/
1309
1310 /****************
1311 * This is the Interrupt service route.
1312 */
1313 static void
1314 xirc2ps_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1315 {
1316 struct net_device *dev = (struct net_device *)dev_id;
1317 local_info_t *lp = dev->priv;
1318 ioaddr_t ioaddr;
1319 u_char saved_page;
1320 unsigned bytes_rcvd;
1321 unsigned int_status, eth_status, rx_status, tx_status;
1322 unsigned rsr, pktlen;
1323 ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
1324 * is this something to worry about?
1325 * -- on a laptop?
1326 */
1327
1328 if (!netif_device_present(dev))
1329 return;
1330
1331 ioaddr = dev->base_addr;
1332 if (lp->mohawk) { /* must disable the interrupt */
1333 PutByte(XIRCREG_CR, 0);
1334 }
1335
1336 DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
1337
1338 saved_page = GetByte(XIRCREG_PR);
1339 /* Read the ISR to see whats the cause for the interrupt.
1340 * This also clears the interrupt flags on CE2 cards
1341 */
1342 int_status = GetByte(XIRCREG_ISR);
1343 bytes_rcvd = 0;
1344 loop_entry:
1345 if (int_status == 0xff) { /* card may be ejected */
1346 DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq);
1347 goto leave;
1348 }
1349 eth_status = GetByte(XIRCREG_ESR);
1350
1351 SelectPage(0x40);
1352 rx_status = GetByte(XIRCREG40_RXST0);
1353 PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1354 tx_status = GetByte(XIRCREG40_TXST0);
1355 tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1356 PutByte(XIRCREG40_TXST0, 0);
1357 PutByte(XIRCREG40_TXST1, 0);
1358
1359 DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1360 dev->name, int_status, eth_status, rx_status, tx_status);
1361
1362 /***** receive section ******/
1363 SelectPage(0);
1364 while (eth_status & FullPktRcvd) {
1365 rsr = GetByte(XIRCREG0_RSR);
1366 if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1367 /* too many bytes received during this int, drop the rest of the
1368 * packets */
1369 lp->stats.rx_dropped++;
1370 DEBUG(2, "%s: RX drop, too much done\n", dev->name);
1371 } else if (rsr & PktRxOk) {
1372 struct sk_buff *skb;
1373
1374 pktlen = GetWord(XIRCREG0_RBC);
1375 bytes_rcvd += pktlen;
1376
1377 DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen);
1378
1379 skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
1380 if (!skb) {
1381 printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
1382 pktlen);
1383 lp->stats.rx_dropped++;
1384 } else { /* okay get the packet */
1385 skb_reserve(skb, 2);
1386 if (lp->silicon == 0 ) { /* work around a hardware bug */
1387 unsigned rhsa; /* receive start address */
1388
1389 SelectPage(5);
1390 rhsa = GetWord(XIRCREG5_RHSA0);
1391 SelectPage(0);
1392 rhsa += 3; /* skip control infos */
1393 if (rhsa >= 0x8000)
1394 rhsa = 0;
1395 if (rhsa + pktlen > 0x8000) {
1396 unsigned i;
1397 u_char *buf = skb_put(skb, pktlen);
1398 for (i=0; i < pktlen ; i++, rhsa++) {
1399 buf[i] = GetByte(XIRCREG_EDP);
1400 if (rhsa == 0x8000) {
1401 rhsa = 0;
1402 i--;
1403 }
1404 }
1405 } else {
1406 insw(ioaddr+XIRCREG_EDP,
1407 skb_put(skb, pktlen), (pktlen+1)>>1);
1408 }
1409 }
1410 #if 0
1411 else if (lp->mohawk) {
1412 /* To use this 32 bit access we should use
1413 * a manual optimized loop
1414 * Also the words are swapped, we can get more
1415 * performance by using 32 bit access and swapping
1416 * the words in a register. Will need this for cardbus
1417 *
1418 * Note: don't forget to change the ALLOC_SKB to .. +3
1419 */
1420 unsigned i;
1421 u_long *p = skb_put(skb, pktlen);
1422 register u_long a;
1423 ioaddr_t edpreg = ioaddr+XIRCREG_EDP-2;
1424 for (i=0; i < len ; i += 4, p++) {
1425 a = inl(edpreg);
1426 __asm__("rorl $16,%0\n\t"
1427 :"=q" (a)
1428 : "0" (a));
1429 *p = a;
1430 }
1431 }
1432 #endif
1433 else {
1434 insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1435 (pktlen+1)>>1);
1436 }
1437 skb->protocol = eth_type_trans(skb, dev);
1438 skb->dev = dev;
1439 netif_rx(skb);
1440 dev->last_rx = jiffies;
1441 lp->stats.rx_packets++;
1442 add_rx_bytes(&lp->stats, pktlen);
1443 if (!(rsr & PhyPkt))
1444 lp->stats.multicast++;
1445 }
1446 } else { /* bad packet */
1447 DEBUG(5, "rsr=%#02x\n", rsr);
1448 }
1449 if (rsr & PktTooLong) {
1450 lp->stats.rx_frame_errors++;
1451 DEBUG(3, "%s: Packet too long\n", dev->name);
1452 }
1453 if (rsr & CRCErr) {
1454 lp->stats.rx_crc_errors++;
1455 DEBUG(3, "%s: CRC error\n", dev->name);
1456 }
1457 if (rsr & AlignErr) {
1458 lp->stats.rx_fifo_errors++; /* okay ? */
1459 DEBUG(3, "%s: Alignment error\n", dev->name);
1460 }
1461
1462 /* clear the received/dropped/error packet */
1463 PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1464
1465 /* get the new ethernet status */
1466 eth_status = GetByte(XIRCREG_ESR);
1467 }
1468 if (rx_status & 0x10) { /* Receive overrun */
1469 lp->stats.rx_over_errors++;
1470 PutByte(XIRCREG_CR, ClearRxOvrun);
1471 DEBUG(3, "receive overrun cleared\n");
1472 }
1473
1474 /***** transmit section ******/
1475 if (int_status & PktTxed) {
1476 unsigned n, nn;
1477
1478 n = lp->last_ptr_value;
1479 nn = GetByte(XIRCREG0_PTR);
1480 lp->last_ptr_value = nn;
1481 if (nn < n) /* rollover */
1482 lp->stats.tx_packets += 256 - n;
1483 else if (n == nn) { /* happens sometimes - don't know why */
1484 DEBUG(0, "PTR not changed?\n");
1485 } else
1486 lp->stats.tx_packets += lp->last_ptr_value - n;
1487 netif_wake_queue(dev);
1488 }
1489 if (tx_status & 0x0002) { /* Execessive collissions */
1490 DEBUG(0, "tx restarted due to execssive collissions\n");
1491 PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
1492 }
1493 if (tx_status & 0x0040)
1494 lp->stats.tx_aborted_errors++;
1495
1496 /* recalculate our work chunk so that we limit the duration of this
1497 * ISR to about 1/10 of a second.
1498 * Calculate only if we received a reasonable amount of bytes.
1499 */
1500 if (bytes_rcvd > 1000) {
1501 u_long duration = jiffies - start_ticks;
1502
1503 if (duration >= HZ/10) { /* if more than about 1/10 second */
1504 maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1505 if (maxrx_bytes < 2000)
1506 maxrx_bytes = 2000;
1507 else if (maxrx_bytes > 22000)
1508 maxrx_bytes = 22000;
1509 DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
1510 maxrx_bytes, bytes_rcvd, duration);
1511 } else if (!duration && maxrx_bytes < 22000) {
1512 /* now much faster */
1513 maxrx_bytes += 2000;
1514 if (maxrx_bytes > 22000)
1515 maxrx_bytes = 22000;
1516 DEBUG(1, "set maxrx=%u\n", maxrx_bytes);
1517 }
1518 }
1519
1520 leave:
1521 if (lockup_hack) {
1522 if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1523 goto loop_entry;
1524 }
1525 SelectPage(saved_page);
1526 PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
1527 /* Instead of dropping packets during a receive, we could
1528 * force an interrupt with this command:
1529 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1530 */
1531 } /* xirc2ps_interrupt */
1532
1533 /*====================================================================*/
1534
1535 static void
1536 do_tx_timeout(struct net_device *dev)
1537 {
1538 local_info_t *lp = dev->priv;
1539 printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
1540 lp->stats.tx_errors++;
1541 /* reset the card */
1542 do_reset(dev,1);
1543 dev->trans_start = jiffies;
1544 netif_wake_queue(dev);
1545 }
1546
1547 static int
1548 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1549 {
1550 local_info_t *lp = dev->priv;
1551 ioaddr_t ioaddr = dev->base_addr;
1552 int okay;
1553 unsigned freespace;
1554 unsigned pktlen = skb? skb->len : 0;
1555
1556 DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
1557 skb, dev, pktlen);
1558
1559 tx_timeout_check(dev, do_tx_timeout);
1560 skb_tx_check(dev, skb);
1561
1562 /* adjust the packet length to min. required
1563 * and hope that the buffer is large enough
1564 * to provide some random data.
1565 * fixme: For Mohawk we can change this by sending
1566 * a larger packetlen than we actually have; the chip will
1567 * pad this in his buffer with random bytes
1568 */
1569 if (pktlen < ETH_ZLEN)
1570 pktlen = ETH_ZLEN;
1571
1572 SelectPage(0);
1573 PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1574 freespace = GetWord(XIRCREG0_TSO);
1575 okay = freespace & 0x8000;
1576 freespace &= 0x7fff;
1577 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1578 okay = pktlen +2 < freespace;
1579 DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
1580 dev->name, freespace, okay ? " (okay)":" (not enough)");
1581 if (!okay) { /* not enough space */
1582 return 1; /* upper layer may decide to requeue this packet */
1583 }
1584 /* send the packet */
1585 PutWord(XIRCREG_EDP, (u_short)pktlen);
1586 outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1587 if (pktlen & 1)
1588 PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1589
1590 if (lp->mohawk)
1591 PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1592
1593 DEV_KFREE_SKB (skb);
1594 dev->trans_start = jiffies;
1595 add_tx_bytes(&lp->stats, pktlen);
1596 netif_start_queue(dev);
1597 return 0;
1598 }
1599
1600 static struct net_device_stats *
1601 do_get_stats(struct net_device *dev)
1602 {
1603 local_info_t *lp = dev->priv;
1604
1605 /* lp->stats.rx_missed_errors = GetByte(?) */
1606 return &lp->stats;
1607 }
1608
1609 /****************
1610 * Set all addresses: This first one is the individual address,
1611 * the next 9 addresses are taken from the multicast list and
1612 * the rest is filled with the individual address.
1613 */
1614 static void
1615 set_addresses(struct net_device *dev)
1616 {
1617 ioaddr_t ioaddr = dev->base_addr;
1618 local_info_t *lp = dev->priv;
1619 struct dev_mc_list *dmi = dev->mc_list;
1620 char *addr;
1621 int i,j,k,n;
1622
1623 SelectPage(k=0x50);
1624 for (i=0,j=8,n=0; ; i++, j++) {
1625 if (i > 5) {
1626 if (++n > 9)
1627 break;
1628 i = 0;
1629 }
1630 if (j > 15) {
1631 j = 8;
1632 k++;
1633 SelectPage(k);
1634 }
1635
1636 if (n && n <= dev->mc_count && dmi) {
1637 addr = dmi->dmi_addr;
1638 dmi = dmi->next;
1639 } else
1640 addr = dev->dev_addr;
1641
1642 if (lp->mohawk)
1643 PutByte(j, addr[5-i]);
1644 else
1645 PutByte(j, addr[i]);
1646 }
1647 SelectPage(0);
1648 }
1649
1650 /****************
1651 * Set or clear the multicast filter for this adaptor.
1652 * We can filter up to 9 addresses, if more are requested we set
1653 * multicast promiscuous mode.
1654 */
1655
1656 static void
1657 set_multicast_list(struct net_device *dev)
1658 {
1659 ioaddr_t ioaddr = dev->base_addr;
1660
1661 SelectPage(0x42);
1662 if (dev->flags & IFF_PROMISC) { /* snoop */
1663 PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
1664 } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
1665 PutByte(XIRCREG42_SWC1, 0x06); /* set MPE */
1666 } else if (dev->mc_count) {
1667 /* the chip can filter 9 addresses perfectly */
1668 PutByte(XIRCREG42_SWC1, 0x00);
1669 SelectPage(0x40);
1670 PutByte(XIRCREG40_CMD0, Offline);
1671 set_addresses(dev);
1672 SelectPage(0x40);
1673 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1674 } else { /* standard usage */
1675 PutByte(XIRCREG42_SWC1, 0x00);
1676 }
1677 SelectPage(0);
1678 }
1679
1680 static int
1681 do_config(struct net_device *dev, struct ifmap *map)
1682 {
1683 local_info_t *local = dev->priv;
1684
1685 DEBUG(0, "do_config(%p)\n", dev);
1686 if (map->port != 255 && map->port != dev->if_port) {
1687 if (map->port > 4)
1688 return -EINVAL;
1689 if (!map->port) {
1690 local->probe_port = 1;
1691 dev->if_port = 1;
1692 } else {
1693 local->probe_port = 0;
1694 dev->if_port = map->port;
1695 }
1696 printk(KERN_INFO "%s: switching to %s port\n",
1697 dev->name, if_names[dev->if_port]);
1698 do_reset(dev,1); /* not the fine way :-) */
1699 }
1700 return 0;
1701 }
1702
1703 /****************
1704 * Open the driver
1705 */
1706 static int
1707 do_open(struct net_device *dev)
1708 {
1709 local_info_t *lp = dev->priv;
1710 dev_link_t *link = &lp->link;
1711
1712 DEBUG(0, "do_open(%p)\n", dev);
1713
1714 /* Check that the PCMCIA card is still here. */
1715 /* Physical device present signature. */
1716 if (!DEV_OK(link))
1717 return -ENODEV;
1718
1719 /* okay */
1720 link->open++;
1721 MOD_INC_USE_COUNT;
1722
1723 netif_start_queue(dev);
1724 netif_mark_up(dev);
1725 do_reset(dev,1);
1726
1727 return 0;
1728 }
1729
1730 static int
1731 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1732 {
1733 local_info_t *local = dev->priv;
1734 ioaddr_t ioaddr = dev->base_addr;
1735 u16 *data = (u16 *)&rq->ifr_data;
1736
1737 DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1738 dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1739 data[0], data[1], data[2], data[3]);
1740
1741 if (!local->mohawk)
1742 return -EOPNOTSUPP;
1743
1744 switch(cmd) {
1745 case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
1746 data[0] = 0; /* we have only this address */
1747 /* fall trough */
1748 case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
1749 data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
1750 break;
1751 case SIOCDEVPRIVATE+2: /* Write the specified MII register */
1752 if (!capable(CAP_NET_ADMIN))
1753 return -EPERM;
1754 mii_wr(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2], 16);
1755 break;
1756 default:
1757 return -EOPNOTSUPP;
1758 }
1759 return 0;
1760 }
1761
1762 static void
1763 hardreset(struct net_device *dev)
1764 {
1765 local_info_t *local = dev->priv;
1766 ioaddr_t ioaddr = dev->base_addr;
1767
1768 SelectPage(4);
1769 udelay(1);
1770 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1771 busy_loop(HZ/25); /* wait 40 msec */
1772 if (local->mohawk)
1773 PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
1774 else
1775 PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1776 busy_loop(HZ/50); /* wait 20 msec */
1777 }
1778
1779 static void
1780 do_reset(struct net_device *dev, int full)
1781 {
1782 local_info_t *local = dev->priv;
1783 ioaddr_t ioaddr = dev->base_addr;
1784 unsigned value;
1785
1786 DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
1787
1788 hardreset(dev);
1789 PutByte(XIRCREG_CR, SoftReset); /* set */
1790 busy_loop(HZ/50); /* wait 20 msec */
1791 PutByte(XIRCREG_CR, 0); /* clear */
1792 busy_loop(HZ/25); /* wait 40 msec */
1793 if (local->mohawk) {
1794 SelectPage(4);
1795 /* set pin GP1 and GP2 to output (0x0c)
1796 * set GP1 to low to power up the ML6692 (0x00)
1797 * set GP2 to high to power up the 10Mhz chip (0x02)
1798 */
1799 PutByte(XIRCREG4_GPR0, 0x0e);
1800 }
1801
1802 /* give the circuits some time to power up */
1803 busy_loop(HZ/2); /* about 500ms */
1804
1805 local->last_ptr_value = 0;
1806 local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1807 : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1808
1809 if (local->probe_port) {
1810 if (!local->mohawk) {
1811 SelectPage(4);
1812 PutByte(XIRCREG4_GPR0, 4);
1813 local->probe_port = 0;
1814 }
1815 } else if (dev->if_port == 2) { /* enable 10Base2 */
1816 SelectPage(0x42);
1817 PutByte(XIRCREG42_SWC1, 0xC0);
1818 } else { /* enable 10BaseT */
1819 SelectPage(0x42);
1820 PutByte(XIRCREG42_SWC1, 0x80);
1821 }
1822 busy_loop(HZ/25); /* wait 40 msec to let it complete */
1823
1824 #ifdef PCMCIA_DEBUG
1825 if (pc_debug) {
1826 SelectPage(0);
1827 value = GetByte(XIRCREG_ESR); /* read the ESR */
1828 printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
1829 }
1830 #endif
1831
1832 /* setup the ECR */
1833 SelectPage(1);
1834 PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1835 PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
1836 value = GetByte(XIRCREG1_ECR);
1837 #if 0
1838 if (local->mohawk)
1839 value |= DisableLinkPulse;
1840 PutByte(XIRCREG1_ECR, value);
1841 #endif
1842 DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value);
1843
1844 SelectPage(0x42);
1845 PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1846
1847 if (local->silicon != 1) {
1848 /* set the local memory dividing line.
1849 * The comments in the sample code say that this is only
1850 * settable with the scipper version 2 which is revision 0.
1851 * Always for CE3 cards
1852 */
1853 SelectPage(2);
1854 PutWord(XIRCREG2_RBS, 0x2000);
1855 }
1856
1857 if (full)
1858 set_addresses(dev);
1859
1860 /* Hardware workaround:
1861 * The receive byte pointer after reset is off by 1 so we need
1862 * to move the offset pointer back to 0.
1863 */
1864 SelectPage(0);
1865 PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1866
1867 /* setup MAC IMRs and clear status registers */
1868 SelectPage(0x40); /* Bit 7 ... bit 0 */
1869 PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1870 PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1871 PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1872 PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1873 PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1874 PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1875
1876 if (full && local->mohawk && init_mii(dev)) {
1877 if (dev->if_port == 4 || local->dingo || local->new_mii) {
1878 printk(KERN_INFO "%s: MII selected\n", dev->name);
1879 SelectPage(2);
1880 PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1881 busy_loop(HZ/50);
1882 } else {
1883 printk(KERN_INFO "%s: MII detected; using 10mbs\n",
1884 dev->name);
1885 SelectPage(0x42);
1886 if (dev->if_port == 2) /* enable 10Base2 */
1887 PutByte(XIRCREG42_SWC1, 0xC0);
1888 else /* enable 10BaseT */
1889 PutByte(XIRCREG42_SWC1, 0x80);
1890 busy_loop(HZ/25); /* wait 40 msec to let it complete */
1891 }
1892 if (full_duplex)
1893 PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1894 } else { /* No MII */
1895 SelectPage(0);
1896 value = GetByte(XIRCREG_ESR); /* read the ESR */
1897 dev->if_port = (value & MediaSelect) ? 1 : 2;
1898 }
1899
1900 /* configure the LEDs */
1901 SelectPage(2);
1902 if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1903 PutByte(XIRCREG2_LED, 0x3b);
1904 else /* Coax: Not-Collision and Activity */
1905 PutByte(XIRCREG2_LED, 0x3a);
1906
1907 if (local->dingo)
1908 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1909
1910 /* enable receiver and put the mac online */
1911 if (full) {
1912 SelectPage(0x40);
1913 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1914 }
1915
1916 /* setup Ethernet IMR and enable interrupts */
1917 SelectPage(1);
1918 PutByte(XIRCREG1_IMR0, 0xff);
1919 udelay(1);
1920 SelectPage(0);
1921 PutByte(XIRCREG_CR, EnableIntr);
1922 if (local->modem && !local->dingo) { /* do some magic */
1923 if (!(GetByte(0x10) & 0x01))
1924 PutByte(0x10, 0x11); /* unmask master-int bit */
1925 }
1926
1927 if (full)
1928 printk(KERN_INFO "%s: media %s, silicon revision %d\n",
1929 dev->name, if_names[dev->if_port], local->silicon);
1930 /* We should switch back to page 0 to avoid a bug in revision 0
1931 * where regs with offset below 8 can't be read after an access
1932 * to the MAC registers */
1933 SelectPage(0);
1934 }
1935
1936 /****************
1937 * Initialize the Media-Independent-Interface
1938 * Returns: True if we have a good MII
1939 */
1940 static int
1941 init_mii(struct net_device *dev)
1942 {
1943 local_info_t *local = dev->priv;
1944 ioaddr_t ioaddr = dev->base_addr;
1945 unsigned control, status, linkpartner;
1946 int i;
1947
1948 if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1949 dev->if_port = if_port;
1950 local->probe_port = 0;
1951 return 1;
1952 }
1953
1954 status = mii_rd(ioaddr, 0, 1);
1955 if ((status & 0xff00) != 0x7800)
1956 return 0; /* No MII */
1957
1958 local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1959
1960 if (local->probe_port)
1961 control = 0x1000; /* auto neg */
1962 else if (dev->if_port == 4)
1963 control = 0x2000; /* no auto neg, 100mbs mode */
1964 else
1965 control = 0x0000; /* no auto neg, 10mbs mode */
1966 mii_wr(ioaddr, 0, 0, control, 16);
1967 udelay(100);
1968 control = mii_rd(ioaddr, 0, 0);
1969
1970 if (control & 0x0400) {
1971 printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
1972 dev->name);
1973 local->probe_port = 0;
1974 return 0;
1975 }
1976
1977 if (local->probe_port) {
1978 /* according to the DP83840A specs the auto negotiation process
1979 * may take up to 3.5 sec, so we use this also for our ML6692
1980 * Fixme: Better to use a timer here!
1981 */
1982 for (i=0; i < 35; i++) {
1983 busy_loop(HZ/10); /* wait 100 msec */
1984 status = mii_rd(ioaddr, 0, 1);
1985 if ((status & 0x0020) && (status & 0x0004))
1986 break;
1987 }
1988
1989 if (!(status & 0x0020)) {
1990 printk(KERN_INFO "%s: autonegotiation failed;"
1991 " using 10mbs\n", dev->name);
1992 if (!local->new_mii) {
1993 control = 0x0000;
1994 mii_wr(ioaddr, 0, 0, control, 16);
1995 udelay(100);
1996 SelectPage(0);
1997 dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1998 }
1999 } else {
2000 linkpartner = mii_rd(ioaddr, 0, 5);
2001 printk(KERN_INFO "%s: MII link partner: %04x\n",
2002 dev->name, linkpartner);
2003 if (linkpartner & 0x0080) {
2004 dev->if_port = 4;
2005 } else
2006 dev->if_port = 1;
2007 }
2008 }
2009
2010 return 1;
2011 }
2012
2013 static void
2014 do_powerdown(struct net_device *dev)
2015 {
2016
2017 ioaddr_t ioaddr = dev->base_addr;
2018
2019 DEBUG(0, "do_powerdown(%p)\n", dev);
2020
2021 SelectPage(4);
2022 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
2023 SelectPage(0);
2024 }
2025
2026 static int
2027 do_stop(struct net_device *dev)
2028 {
2029 ioaddr_t ioaddr = dev->base_addr;
2030 local_info_t *lp = dev->priv;
2031 dev_link_t *link = &lp->link;
2032
2033 DEBUG(0, "do_stop(%p)\n", dev);
2034
2035 if (!link)
2036 return -ENODEV;
2037
2038 netif_stop_queue(dev);
2039 netif_mark_down(dev);
2040
2041 SelectPage(0);
2042 PutByte(XIRCREG_CR, 0); /* disable interrupts */
2043 SelectPage(0x01);
2044 PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
2045 SelectPage(4);
2046 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
2047 SelectPage(0);
2048
2049 link->open--;
2050 if (link->state & DEV_STALE_CONFIG)
2051 mod_timer(&link->release, jiffies + HZ/20);
2052
2053 MOD_DEC_USE_COUNT;
2054
2055 return 0;
2056 }
2057
2058 static int __init
2059 init_xirc2ps_cs(void)
2060 {
2061 servinfo_t serv;
2062
2063 printk(KERN_INFO "%s\n", version);
2064 if (lockup_hack)
2065 printk(KINF_XIRC "lockup hack is enabled\n");
2066 CardServices(GetCardServicesInfo, &serv);
2067 if (serv.Revision != CS_RELEASE_CODE) {
2068 printk(KNOT_XIRC "Card Services release does not match!\n");
2069 return -EINVAL;
2070 }
2071 DEBUG(0, "pc_debug=%d\n", pc_debug);
2072 register_pccard_driver(&dev_info, &xirc2ps_attach, &xirc2ps_detach);
2073 return 0;
2074 }
2075
2076 static void __exit
2077 exit_xirc2ps_cs(void)
2078 {
2079 DEBUG(0, "unloading\n");
2080 unregister_pccard_driver(&dev_info);
2081 while (dev_list) {
2082 if (dev_list->state & DEV_CONFIG)
2083 xirc2ps_release((u_long)dev_list);
2084 if (dev_list) /* xirc2ps_release() might already have detached... */
2085 xirc2ps_detach(dev_list);
2086 }
2087 }
2088
2089 module_init(init_xirc2ps_cs);
2090 module_exit(exit_xirc2ps_cs);
2091