| 1 |
/*====================================================================== |
| 2 |
|
| 3 |
A PCMCIA ethernet driver for NS8390-based cards |
| 4 |
|
| 5 |
This driver supports the D-Link DE-650 and Linksys EthernetCard |
| 6 |
cards, the newer D-Link and Linksys combo cards, Accton EN2212 |
| 7 |
cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory |
| 8 |
mode, and the IBM Credit Card Adapter, the NE4100, the Thomas |
| 9 |
Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory |
| 10 |
mode. It will also handle the Socket EA card in either mode. |
| 11 |
|
| 12 |
Copyright (C) 1999 David A. Hinds -- [email protected] |
| 13 |
|
| 14 |
pcnet_cs.c 1.153 2003/11/09 18:53:09 |
| 15 |
|
| 16 |
The network driver code is based on Donald Becker's NE2000 code: |
| 17 |
|
| 18 |
Written 1992,1993 by Donald Becker. |
| 19 |
Copyright 1993 United States Government as represented by the |
| 20 |
Director, National Security Agency. This software may be used and |
| 21 |
distributed according to the terms of the GNU General Public License, |
| 22 |
incorporated herein by reference. |
| 23 |
Donald Becker may be reached at [email protected] |
| 24 |
|
| 25 |
Based also on Keith Moore's changes to Don Becker's code, for IBM |
| 26 |
CCAE support. Drivers merged back together, and shared-memory |
| 27 |
Socket EA support added, by Ken Raeburn, September 1995. |
| 28 |
|
| 29 |
======================================================================*/ |
| 30 |
|
| 31 |
#include <linux/kernel.h> |
| 32 |
#include <linux/module.h> |
| 33 |
#include <linux/init.h> |
| 34 |
#include <linux/sched.h> |
| 35 |
#include <linux/ptrace.h> |
| 36 |
#include <linux/slab.h> |
| 37 |
#include <linux/string.h> |
| 38 |
#include <linux/timer.h> |
| 39 |
#include <linux/delay.h> |
| 40 |
#include <asm/io.h> |
| 41 |
#include <asm/system.h> |
| 42 |
#include <asm/byteorder.h> |
| 43 |
#include <asm/uaccess.h> |
| 44 |
|
| 45 |
#include <linux/netdevice.h> |
| 46 |
#include <../drivers/net/8390.h> |
| 47 |
|
| 48 |
#include <pcmcia/version.h> |
| 49 |
#include <pcmcia/cs_types.h> |
| 50 |
#include <pcmcia/cs.h> |
| 51 |
#include <pcmcia/cistpl.h> |
| 52 |
#include <pcmcia/ciscode.h> |
| 53 |
#include <pcmcia/ds.h> |
| 54 |
#include <pcmcia/cisreg.h> |
| 55 |
|
| 56 |
#define PCNET_CMD 0x00 |
| 57 |
#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */ |
| 58 |
#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */ |
| 59 |
#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */ |
| 60 |
|
| 61 |
#define PCNET_START_PG 0x40 /* First page of TX buffer */ |
| 62 |
#define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */ |
| 63 |
|
| 64 |
/* Socket EA cards have a larger packet buffer */ |
| 65 |
#define SOCKET_START_PG 0x01 |
| 66 |
#define SOCKET_STOP_PG 0xff |
| 67 |
|
| 68 |
#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ |
| 69 |
|
| 70 |
static char *if_names[] = { "auto", "10baseT", "10base2"}; |
| 71 |
|
| 72 |
#ifdef PCMCIA_DEBUG |
| 73 |
static int pc_debug = PCMCIA_DEBUG; |
| 74 |
MODULE_PARM(pc_debug, "i"); |
| 75 |
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) |
| 76 |
static char *version = |
| 77 |
"pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)"; |
| 78 |
#else |
| 79 |
#define DEBUG(n, args...) |
| 80 |
#endif |
| 81 |
|
| 82 |
/*====================================================================*/ |
| 83 |
|
| 84 |
/* Module parameters */ |
| 85 |
|
| 86 |
MODULE_AUTHOR("David Hinds <[email protected]>"); |
| 87 |
MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver"); |
| 88 |
MODULE_LICENSE("GPL"); |
| 89 |
|
| 90 |
#define INT_MODULE_PARM(n, v) static int n = v; MODULE_PARM(n, "i") |
| 91 |
|
| 92 |
/* Bit map of interrupts to choose from */ |
| 93 |
INT_MODULE_PARM(irq_mask, 0xdeb8); |
| 94 |
static int irq_list[4] = { -1 }; |
| 95 |
MODULE_PARM(irq_list, "1-4i"); |
| 96 |
|
| 97 |
INT_MODULE_PARM(if_port, 1); /* Transceiver type */ |
| 98 |
INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */ |
| 99 |
INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */ |
| 100 |
INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */ |
| 101 |
INT_MODULE_PARM(delay_time, 4); /* in usec */ |
| 102 |
INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */ |
| 103 |
INT_MODULE_PARM(full_duplex, 0); /* full duplex? */ |
| 104 |
|
| 105 |
/* Ugh! Let the user hardwire the hardware address for queer cards */ |
| 106 |
static int hw_addr[6] = { 0, /* ... */ }; |
| 107 |
MODULE_PARM(hw_addr, "6i"); |
| 108 |
|
| 109 |
/*====================================================================*/ |
| 110 |
|
| 111 |
static void mii_phy_probe(struct net_device *dev); |
| 112 |
static void pcnet_config(dev_link_t *link); |
| 113 |
static void pcnet_release(u_long arg); |
| 114 |
static int pcnet_event(event_t event, int priority, |
| 115 |
event_callback_args_t *args); |
| 116 |
static int pcnet_open(struct net_device *dev); |
| 117 |
static int pcnet_close(struct net_device *dev); |
| 118 |
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| 119 |
static void ei_irq_wrapper(int irq, void *dev_id, struct pt_regs *regs); |
| 120 |
static void ei_watchdog(u_long arg); |
| 121 |
static void pcnet_reset_8390(struct net_device *dev); |
| 122 |
static int set_config(struct net_device *dev, struct ifmap *map); |
| 123 |
static int setup_shmem_window(dev_link_t *link, int start_pg, |
| 124 |
int stop_pg, int cm_offset); |
| 125 |
static int setup_dma_config(dev_link_t *link, int start_pg, |
| 126 |
int stop_pg); |
| 127 |
|
| 128 |
static dev_link_t *pcnet_attach(void); |
| 129 |
static void pcnet_detach(dev_link_t *); |
| 130 |
|
| 131 |
static dev_info_t dev_info = "pcnet_cs"; |
| 132 |
static dev_link_t *dev_list; |
| 133 |
|
| 134 |
/*====================================================================*/ |
| 135 |
|
| 136 |
typedef struct hw_info_t { |
| 137 |
u_int offset; |
| 138 |
u_char a0, a1, a2; |
| 139 |
u_int flags; |
| 140 |
} hw_info_t; |
| 141 |
|
| 142 |
#define DELAY_OUTPUT 0x01 |
| 143 |
#define HAS_MISC_REG 0x02 |
| 144 |
#define USE_BIG_BUF 0x04 |
| 145 |
#define HAS_IBM_MISC 0x08 |
| 146 |
#define IS_DL10019 0x10 |
| 147 |
#define IS_DL10022 0x20 |
| 148 |
#define HAS_MII 0x40 |
| 149 |
#define USE_SHMEM 0x80 /* autodetected */ |
| 150 |
|
| 151 |
#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */ |
| 152 |
#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */ |
| 153 |
#define MII_PHYID_REV_MASK 0xfffffff0 |
| 154 |
#define MII_PHYID_REG1 0x02 |
| 155 |
#define MII_PHYID_REG2 0x03 |
| 156 |
|
| 157 |
static hw_info_t hw_info[] = { |
| 158 |
{ /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT }, |
| 159 |
{ /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 }, |
| 160 |
{ /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 }, |
| 161 |
{ /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94, |
| 162 |
DELAY_OUTPUT | HAS_IBM_MISC }, |
| 163 |
{ /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 }, |
| 164 |
{ /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 }, |
| 165 |
{ /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 }, |
| 166 |
{ /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 }, |
| 167 |
{ /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 }, |
| 168 |
{ /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 }, |
| 169 |
{ /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48, |
| 170 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 171 |
{ /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 }, |
| 172 |
{ /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 }, |
| 173 |
{ /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a, |
| 174 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 175 |
{ /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac, |
| 176 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 177 |
{ /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29, |
| 178 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 179 |
{ /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a, |
| 180 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 181 |
{ /* IBM FME */ 0x0374, 0x00, 0x04, 0xac, |
| 182 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 183 |
{ /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87, |
| 184 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 185 |
{ /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17, |
| 186 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 187 |
{ /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8, |
| 188 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 189 |
{ /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0, |
| 190 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 191 |
{ /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0, |
| 192 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 193 |
{ /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 }, |
| 194 |
{ /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 }, |
| 195 |
{ /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0, |
| 196 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 197 |
{ /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f, |
| 198 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 199 |
{ /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 }, |
| 200 |
{ /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 }, |
| 201 |
{ /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 }, |
| 202 |
{ /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 }, |
| 203 |
{ /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65, |
| 204 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 205 |
{ /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45, |
| 206 |
HAS_MISC_REG | HAS_IBM_MISC }, |
| 207 |
{ /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 }, |
| 208 |
{ /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 }, |
| 209 |
{ /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 }, |
| 210 |
{ /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b, |
| 211 |
DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF }, |
| 212 |
{ /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 }, |
| 213 |
{ /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 }, |
| 214 |
{ /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 }, |
| 215 |
{ /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 }, |
| 216 |
{ /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 } |
| 217 |
}; |
| 218 |
|
| 219 |
#define NR_INFO (sizeof(hw_info)/sizeof(hw_info_t)) |
| 220 |
|
| 221 |
static hw_info_t default_info = { 0, 0, 0, 0, 0 }; |
| 222 |
static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII }; |
| 223 |
static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII }; |
| 224 |
|
| 225 |
typedef struct pcnet_dev_t { |
| 226 |
struct net_device dev; /* so &dev == &pcnet_dev_t */ |
| 227 |
dev_link_t link; |
| 228 |
dev_node_t node; |
| 229 |
u_int flags; |
| 230 |
caddr_t base; |
| 231 |
struct timer_list watchdog; |
| 232 |
int stale, fast_poll; |
| 233 |
u_char phy_id; |
| 234 |
u_char eth_phy, pna_phy; |
| 235 |
u_short link_status; |
| 236 |
u_long mii_reset; |
| 237 |
} pcnet_dev_t; |
| 238 |
|
| 239 |
/*====================================================================== |
| 240 |
|
| 241 |
This bit of code is used to avoid unregistering network devices |
| 242 |
at inappropriate times. 2.2 and later kernels are fairly picky |
| 243 |
about when this can happen. |
| 244 |
|
| 245 |
======================================================================*/ |
| 246 |
|
| 247 |
static void flush_stale_links(void) |
| 248 |
{ |
| 249 |
dev_link_t *link, *next; |
| 250 |
for (link = dev_list; link; link = next) { |
| 251 |
next = link->next; |
| 252 |
if (link->state & DEV_STALE_LINK) |
| 253 |
pcnet_detach(link); |
| 254 |
} |
| 255 |
} |
| 256 |
|
| 257 |
/*====================================================================*/ |
| 258 |
|
| 259 |
static void cs_error(client_handle_t handle, int func, int ret) |
| 260 |
{ |
| 261 |
error_info_t err = { func, ret }; |
| 262 |
CardServices(ReportError, handle, &err); |
| 263 |
} |
| 264 |
|
| 265 |
/*====================================================================== |
| 266 |
|
| 267 |
We never need to do anything when a pcnet device is "initialized" |
| 268 |
by the net software, because we only register already-found cards. |
| 269 |
|
| 270 |
======================================================================*/ |
| 271 |
|
| 272 |
static int pcnet_init(struct net_device *dev) |
| 273 |
{ |
| 274 |
return 0; |
| 275 |
} |
| 276 |
|
| 277 |
/*====================================================================== |
| 278 |
|
| 279 |
pcnet_attach() creates an "instance" of the driver, allocating |
| 280 |
local data structures for one device. The device is registered |
| 281 |
with Card Services. |
| 282 |
|
| 283 |
======================================================================*/ |
| 284 |
|
| 285 |
static dev_link_t *pcnet_attach(void) |
| 286 |
{ |
| 287 |
pcnet_dev_t *info; |
| 288 |
dev_link_t *link; |
| 289 |
struct net_device *dev; |
| 290 |
client_reg_t client_reg; |
| 291 |
int i, ret; |
| 292 |
|
| 293 |
DEBUG(0, "pcnet_attach()\n"); |
| 294 |
flush_stale_links(); |
| 295 |
|
| 296 |
/* Create new ethernet device */ |
| 297 |
info = kmalloc(sizeof(*info), GFP_KERNEL); |
| 298 |
if (!info) return NULL; |
| 299 |
memset(info, 0, sizeof(*info)); |
| 300 |
link = &info->link; dev = &info->dev; |
| 301 |
link->priv = info; |
| 302 |
|
| 303 |
init_timer(&link->release); |
| 304 |
link->release.function = &pcnet_release; |
| 305 |
link->release.data = (u_long)link; |
| 306 |
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; |
| 307 |
link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; |
| 308 |
if (irq_list[0] == -1) |
| 309 |
link->irq.IRQInfo2 = irq_mask; |
| 310 |
else |
| 311 |
for (i = 0; i < 4; i++) |
| 312 |
link->irq.IRQInfo2 |= 1 << irq_list[i]; |
| 313 |
link->conf.Attributes = CONF_ENABLE_IRQ; |
| 314 |
link->conf.IntType = INT_MEMORY_AND_IO; |
| 315 |
|
| 316 |
ethdev_init(dev); |
| 317 |
init_dev_name(dev, info->node); |
| 318 |
dev->init = &pcnet_init; |
| 319 |
dev->open = &pcnet_open; |
| 320 |
dev->stop = &pcnet_close; |
| 321 |
dev->set_config = &set_config; |
| 322 |
|
| 323 |
/* Register with Card Services */ |
| 324 |
link->next = dev_list; |
| 325 |
dev_list = link; |
| 326 |
client_reg.dev_info = &dev_info; |
| 327 |
client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; |
| 328 |
client_reg.EventMask = |
| 329 |
CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | |
| 330 |
CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | |
| 331 |
CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; |
| 332 |
client_reg.event_handler = &pcnet_event; |
| 333 |
client_reg.Version = 0x0210; |
| 334 |
client_reg.event_callback_args.client_data = link; |
| 335 |
ret = CardServices(RegisterClient, &link->handle, &client_reg); |
| 336 |
if (ret != CS_SUCCESS) { |
| 337 |
cs_error(link->handle, RegisterClient, ret); |
| 338 |
pcnet_detach(link); |
| 339 |
return NULL; |
| 340 |
} |
| 341 |
|
| 342 |
return link; |
| 343 |
} /* pcnet_attach */ |
| 344 |
|
| 345 |
/*====================================================================== |
| 346 |
|
| 347 |
This deletes a driver "instance". The device is de-registered |
| 348 |
with Card Services. If it has been released, all local data |
| 349 |
structures are freed. Otherwise, the structures will be freed |
| 350 |
when the device is released. |
| 351 |
|
| 352 |
======================================================================*/ |
| 353 |
|
| 354 |
static void pcnet_detach(dev_link_t *link) |
| 355 |
{ |
| 356 |
pcnet_dev_t *info = link->priv; |
| 357 |
dev_link_t **linkp; |
| 358 |
|
| 359 |
DEBUG(0, "pcnet_detach(0x%p)\n", link); |
| 360 |
|
| 361 |
/* Locate device structure */ |
| 362 |
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) |
| 363 |
if (*linkp == link) break; |
| 364 |
if (*linkp == NULL) |
| 365 |
return; |
| 366 |
|
| 367 |
del_timer(&link->release); |
| 368 |
if (link->state & DEV_CONFIG) { |
| 369 |
pcnet_release((u_long)link); |
| 370 |
if (link->state & DEV_STALE_CONFIG) { |
| 371 |
link->state |= DEV_STALE_LINK; |
| 372 |
return; |
| 373 |
} |
| 374 |
} |
| 375 |
|
| 376 |
if (link->handle) |
| 377 |
CardServices(DeregisterClient, link->handle); |
| 378 |
|
| 379 |
/* Unlink device structure, free bits */ |
| 380 |
*linkp = link->next; |
| 381 |
if (link->dev) |
| 382 |
unregister_netdev(&info->dev); |
| 383 |
kfree(info); |
| 384 |
|
| 385 |
} /* pcnet_detach */ |
| 386 |
|
| 387 |
/*====================================================================== |
| 388 |
|
| 389 |
This probes for a card's hardware address, for card types that |
| 390 |
encode this information in their CIS. |
| 391 |
|
| 392 |
======================================================================*/ |
| 393 |
|
| 394 |
static hw_info_t *get_hwinfo(dev_link_t *link) |
| 395 |
{ |
| 396 |
struct net_device *dev = link->priv; |
| 397 |
win_req_t req; |
| 398 |
memreq_t mem; |
| 399 |
u_char *base, *virt; |
| 400 |
int i, j; |
| 401 |
|
| 402 |
/* Allocate a small memory window */ |
| 403 |
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; |
| 404 |
req.Base = 0; req.Size = 0; |
| 405 |
req.AccessSpeed = 0; |
| 406 |
link->win = (window_handle_t)link->handle; |
| 407 |
i = CardServices(RequestWindow, &link->win, &req); |
| 408 |
if (i != CS_SUCCESS) { |
| 409 |
cs_error(link->handle, RequestWindow, i); |
| 410 |
return NULL; |
| 411 |
} |
| 412 |
|
| 413 |
virt = ioremap(req.Base, req.Size); |
| 414 |
mem.Page = 0; |
| 415 |
for (i = 0; i < NR_INFO; i++) { |
| 416 |
mem.CardOffset = hw_info[i].offset & ~(req.Size-1); |
| 417 |
CardServices(MapMemPage, link->win, &mem); |
| 418 |
base = &virt[hw_info[i].offset & (req.Size-1)]; |
| 419 |
if ((readb(base+0) == hw_info[i].a0) && |
| 420 |
(readb(base+2) == hw_info[i].a1) && |
| 421 |
(readb(base+4) == hw_info[i].a2)) |
| 422 |
break; |
| 423 |
} |
| 424 |
if (i < NR_INFO) { |
| 425 |
for (j = 0; j < 6; j++) |
| 426 |
dev->dev_addr[j] = readb(base + (j<<1)); |
| 427 |
} |
| 428 |
|
| 429 |
iounmap(virt); |
| 430 |
j = CardServices(ReleaseWindow, link->win); |
| 431 |
if (j != CS_SUCCESS) |
| 432 |
cs_error(link->handle, ReleaseWindow, j); |
| 433 |
return (i < NR_INFO) ? hw_info+i : NULL; |
| 434 |
} /* get_hwinfo */ |
| 435 |
|
| 436 |
/*====================================================================== |
| 437 |
|
| 438 |
This probes for a card's hardware address by reading the PROM. |
| 439 |
It checks the address against a list of known types, then falls |
| 440 |
back to a simple NE2000 clone signature check. |
| 441 |
|
| 442 |
======================================================================*/ |
| 443 |
|
| 444 |
static hw_info_t *get_prom(dev_link_t *link) |
| 445 |
{ |
| 446 |
struct net_device *dev = link->priv; |
| 447 |
ioaddr_t ioaddr = dev->base_addr; |
| 448 |
u_char prom[32]; |
| 449 |
int i, j; |
| 450 |
|
| 451 |
/* This is lifted straight from drivers/net/ne.c */ |
| 452 |
struct { |
| 453 |
u_char value, offset; |
| 454 |
} program_seq[] = { |
| 455 |
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/ |
| 456 |
{0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */ |
| 457 |
{0x00, EN0_RCNTLO}, /* Clear the count regs. */ |
| 458 |
{0x00, EN0_RCNTHI}, |
| 459 |
{0x00, EN0_IMR}, /* Mask completion irq. */ |
| 460 |
{0xFF, EN0_ISR}, |
| 461 |
{E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */ |
| 462 |
{E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */ |
| 463 |
{32, EN0_RCNTLO}, |
| 464 |
{0x00, EN0_RCNTHI}, |
| 465 |
{0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */ |
| 466 |
{0x00, EN0_RSARHI}, |
| 467 |
{E8390_RREAD+E8390_START, E8390_CMD}, |
| 468 |
}; |
| 469 |
|
| 470 |
pcnet_reset_8390(dev); |
| 471 |
mdelay(10); |
| 472 |
|
| 473 |
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++) |
| 474 |
outb_p(program_seq[i].value, ioaddr + program_seq[i].offset); |
| 475 |
|
| 476 |
for (i = 0; i < 32; i++) |
| 477 |
prom[i] = inb(ioaddr + PCNET_DATAPORT); |
| 478 |
for (i = 0; i < NR_INFO; i++) { |
| 479 |
if ((prom[0] == hw_info[i].a0) && |
| 480 |
(prom[2] == hw_info[i].a1) && |
| 481 |
(prom[4] == hw_info[i].a2)) |
| 482 |
break; |
| 483 |
} |
| 484 |
if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) { |
| 485 |
for (j = 0; j < 6; j++) |
| 486 |
dev->dev_addr[j] = prom[j<<1]; |
| 487 |
return (i < NR_INFO) ? hw_info+i : &default_info; |
| 488 |
} |
| 489 |
return NULL; |
| 490 |
} /* get_prom */ |
| 491 |
|
| 492 |
/*====================================================================== |
| 493 |
|
| 494 |
For DL10019 based cards, like the Linksys EtherFast |
| 495 |
|
| 496 |
======================================================================*/ |
| 497 |
|
| 498 |
static hw_info_t *get_dl10019(dev_link_t *link) |
| 499 |
{ |
| 500 |
struct net_device *dev = link->priv; |
| 501 |
int i; |
| 502 |
u_char sum; |
| 503 |
|
| 504 |
for (sum = 0, i = 0x14; i < 0x1c; i++) |
| 505 |
sum += inb_p(dev->base_addr + i); |
| 506 |
if (sum != 0xff) |
| 507 |
return NULL; |
| 508 |
for (i = 0; i < 6; i++) |
| 509 |
dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i); |
| 510 |
i = inb(dev->base_addr + 0x1f); |
| 511 |
return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info; |
| 512 |
} |
| 513 |
|
| 514 |
/*====================================================================== |
| 515 |
|
| 516 |
For Asix AX88190 based cards |
| 517 |
|
| 518 |
======================================================================*/ |
| 519 |
|
| 520 |
static hw_info_t *get_ax88190(dev_link_t *link) |
| 521 |
{ |
| 522 |
struct net_device *dev = link->priv; |
| 523 |
ioaddr_t ioaddr = dev->base_addr; |
| 524 |
int i, j; |
| 525 |
|
| 526 |
/* Not much of a test, but the alternatives are messy */ |
| 527 |
if (link->conf.ConfigBase != 0x03c0) |
| 528 |
return NULL; |
| 529 |
|
| 530 |
outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ |
| 531 |
outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */ |
| 532 |
outb_p(0x04, ioaddr + EN0_RSARHI); |
| 533 |
outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD); |
| 534 |
|
| 535 |
for (i = 0; i < 6; i += 2) { |
| 536 |
j = inw(ioaddr + PCNET_DATAPORT); |
| 537 |
dev->dev_addr[i] = j & 0xff; |
| 538 |
dev->dev_addr[i+1] = j >> 8; |
| 539 |
} |
| 540 |
printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n"); |
| 541 |
printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n"); |
| 542 |
return NULL; |
| 543 |
} |
| 544 |
|
| 545 |
/*====================================================================== |
| 546 |
|
| 547 |
This should be totally unnecessary... but when we can't figure |
| 548 |
out the hardware address any other way, we'll let the user hard |
| 549 |
wire it when the module is initialized. |
| 550 |
|
| 551 |
======================================================================*/ |
| 552 |
|
| 553 |
static hw_info_t *get_hwired(dev_link_t *link) |
| 554 |
{ |
| 555 |
struct net_device *dev = link->priv; |
| 556 |
int i; |
| 557 |
|
| 558 |
for (i = 0; i < 6; i++) |
| 559 |
if (hw_addr[i] != 0) break; |
| 560 |
if (i == 6) |
| 561 |
return NULL; |
| 562 |
|
| 563 |
for (i = 0; i < 6; i++) |
| 564 |
dev->dev_addr[i] = hw_addr[i]; |
| 565 |
|
| 566 |
return &default_info; |
| 567 |
} /* get_hwired */ |
| 568 |
|
| 569 |
/*====================================================================== |
| 570 |
|
| 571 |
pcnet_config() is scheduled to run after a CARD_INSERTION event |
| 572 |
is received, to configure the PCMCIA socket, and to make the |
| 573 |
ethernet device available to the system. |
| 574 |
|
| 575 |
======================================================================*/ |
| 576 |
|
| 577 |
#define CS_CHECK(fn, args...) \ |
| 578 |
while ((last_ret=CardServices(last_fn=(fn), args))!=0) goto cs_failed |
| 579 |
|
| 580 |
#define CFG_CHECK(fn, args...) \ |
| 581 |
if (CardServices(fn, args) != 0) goto next_entry |
| 582 |
|
| 583 |
static int try_io_port(dev_link_t *link) |
| 584 |
{ |
| 585 |
int j, ret; |
| 586 |
if (link->io.NumPorts1 == 32) { |
| 587 |
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; |
| 588 |
if (link->io.NumPorts2 > 0) { |
| 589 |
/* for master/slave multifunction cards */ |
| 590 |
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; |
| 591 |
link->irq.Attributes = |
| 592 |
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED; |
| 593 |
} |
| 594 |
} else { |
| 595 |
/* This should be two 16-port windows */ |
| 596 |
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; |
| 597 |
link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; |
| 598 |
} |
| 599 |
if (link->io.BasePort1 == 0) { |
| 600 |
link->io.IOAddrLines = 16; |
| 601 |
for (j = 0; j < 0x400; j += 0x20) { |
| 602 |
link->io.BasePort1 = j ^ 0x300; |
| 603 |
link->io.BasePort2 = (j ^ 0x300) + 0x10; |
| 604 |
ret = CardServices(RequestIO, link->handle, &link->io); |
| 605 |
if (ret == CS_SUCCESS) return ret; |
| 606 |
} |
| 607 |
return ret; |
| 608 |
} else { |
| 609 |
return CardServices(RequestIO, link->handle, &link->io); |
| 610 |
} |
| 611 |
} |
| 612 |
|
| 613 |
static void pcnet_config(dev_link_t *link) |
| 614 |
{ |
| 615 |
client_handle_t handle = link->handle; |
| 616 |
pcnet_dev_t *info = link->priv; |
| 617 |
struct net_device *dev = &info->dev; |
| 618 |
tuple_t tuple; |
| 619 |
cisparse_t parse; |
| 620 |
int i, last_ret, last_fn, start_pg, stop_pg, cm_offset; |
| 621 |
int manfid = 0, prodid = 0, has_shmem = 0; |
| 622 |
u_short buf[64]; |
| 623 |
config_info_t conf; |
| 624 |
hw_info_t *hw_info; |
| 625 |
|
| 626 |
DEBUG(0, "pcnet_config(0x%p)\n", link); |
| 627 |
|
| 628 |
tuple.Attributes = 0; |
| 629 |
tuple.TupleData = (cisdata_t *)buf; |
| 630 |
tuple.TupleDataMax = sizeof(buf); |
| 631 |
tuple.TupleOffset = 0; |
| 632 |
tuple.DesiredTuple = CISTPL_CONFIG; |
| 633 |
CS_CHECK(GetFirstTuple, handle, &tuple); |
| 634 |
CS_CHECK(GetTupleData, handle, &tuple); |
| 635 |
CS_CHECK(ParseTuple, handle, &tuple, &parse); |
| 636 |
link->conf.ConfigBase = parse.config.base; |
| 637 |
link->conf.Present = parse.config.rmask[0]; |
| 638 |
|
| 639 |
/* Configure card */ |
| 640 |
link->state |= DEV_CONFIG; |
| 641 |
|
| 642 |
/* Look up current Vcc */ |
| 643 |
CS_CHECK(GetConfigurationInfo, handle, &conf); |
| 644 |
link->conf.Vcc = conf.Vcc; |
| 645 |
|
| 646 |
tuple.DesiredTuple = CISTPL_MANFID; |
| 647 |
tuple.Attributes = TUPLE_RETURN_COMMON; |
| 648 |
if ((CardServices(GetFirstTuple, handle, &tuple) == CS_SUCCESS) && |
| 649 |
(CardServices(GetTupleData, handle, &tuple) == CS_SUCCESS)) { |
| 650 |
manfid = le16_to_cpu(buf[0]); |
| 651 |
prodid = le16_to_cpu(buf[1]); |
| 652 |
} |
| 653 |
|
| 654 |
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; |
| 655 |
tuple.Attributes = 0; |
| 656 |
CS_CHECK(GetFirstTuple, handle, &tuple); |
| 657 |
while (last_ret == CS_SUCCESS) { |
| 658 |
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); |
| 659 |
cistpl_io_t *io = &(parse.cftable_entry.io); |
| 660 |
|
| 661 |
CFG_CHECK(GetTupleData, handle, &tuple); |
| 662 |
CFG_CHECK(ParseTuple, handle, &tuple, &parse); |
| 663 |
if ((cfg->index == 0) || (cfg->io.nwin == 0)) |
| 664 |
goto next_entry; |
| 665 |
|
| 666 |
link->conf.ConfigIndex = cfg->index; |
| 667 |
/* For multifunction cards, by convention, we configure the |
| 668 |
network function with window 0, and serial with window 1 */ |
| 669 |
if (io->nwin > 1) { |
| 670 |
i = (io->win[1].len > io->win[0].len); |
| 671 |
link->io.BasePort2 = io->win[1-i].base; |
| 672 |
link->io.NumPorts2 = io->win[1-i].len; |
| 673 |
} else { |
| 674 |
i = link->io.NumPorts2 = 0; |
| 675 |
} |
| 676 |
has_shmem = ((cfg->mem.nwin == 1) && |
| 677 |
(cfg->mem.win[0].len >= 0x4000)); |
| 678 |
link->io.BasePort1 = io->win[i].base; |
| 679 |
link->io.NumPorts1 = io->win[i].len; |
| 680 |
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; |
| 681 |
if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) { |
| 682 |
last_ret = try_io_port(link); |
| 683 |
if (last_ret == CS_SUCCESS) break; |
| 684 |
} |
| 685 |
next_entry: |
| 686 |
last_ret = CardServices(GetNextTuple, handle, &tuple); |
| 687 |
} |
| 688 |
if (last_ret != CS_SUCCESS) { |
| 689 |
cs_error(handle, RequestIO, last_ret); |
| 690 |
goto failed; |
| 691 |
} |
| 692 |
|
| 693 |
CS_CHECK(RequestIRQ, handle, &link->irq); |
| 694 |
|
| 695 |
if (link->io.NumPorts2 == 8) { |
| 696 |
link->conf.Attributes |= CONF_ENABLE_SPKR; |
| 697 |
link->conf.Status = CCSR_AUDIO_ENA; |
| 698 |
} |
| 699 |
if ((manfid == MANFID_IBM) && |
| 700 |
(prodid == PRODID_IBM_HOME_AND_AWAY)) |
| 701 |
link->conf.ConfigIndex |= 0x10; |
| 702 |
|
| 703 |
CS_CHECK(RequestConfiguration, handle, &link->conf); |
| 704 |
dev->irq = link->irq.AssignedIRQ; |
| 705 |
dev->base_addr = link->io.BasePort1; |
| 706 |
if (info->flags & HAS_MISC_REG) { |
| 707 |
if ((if_port == 1) || (if_port == 2)) |
| 708 |
dev->if_port = if_port; |
| 709 |
else |
| 710 |
printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n"); |
| 711 |
} else { |
| 712 |
dev->if_port = 0; |
| 713 |
} |
| 714 |
if (register_netdev(dev) != 0) { |
| 715 |
printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n"); |
| 716 |
goto failed; |
| 717 |
} |
| 718 |
|
| 719 |
hw_info = get_hwinfo(link); |
| 720 |
if (hw_info == NULL) |
| 721 |
hw_info = get_prom(link); |
| 722 |
if (hw_info == NULL) |
| 723 |
hw_info = get_dl10019(link); |
| 724 |
if (hw_info == NULL) |
| 725 |
hw_info = get_ax88190(link); |
| 726 |
if (hw_info == NULL) |
| 727 |
hw_info = get_hwired(link); |
| 728 |
|
| 729 |
if (hw_info == NULL) { |
| 730 |
printk(KERN_NOTICE "pcnet_cs: unable to read hardware net" |
| 731 |
" address for io base %#3lx\n", dev->base_addr); |
| 732 |
unregister_netdev(dev); |
| 733 |
goto failed; |
| 734 |
} |
| 735 |
|
| 736 |
info->flags = hw_info->flags; |
| 737 |
/* Check for user overrides */ |
| 738 |
info->flags |= (delay_output) ? DELAY_OUTPUT : 0; |
| 739 |
if ((manfid == MANFID_SOCKET) && |
| 740 |
((prodid == PRODID_SOCKET_LPE) || |
| 741 |
(prodid == PRODID_SOCKET_LPE_CF) || |
| 742 |
(prodid == PRODID_SOCKET_EIO))) |
| 743 |
info->flags &= ~USE_BIG_BUF; |
| 744 |
if (!use_big_buf) |
| 745 |
info->flags &= ~USE_BIG_BUF; |
| 746 |
|
| 747 |
if (info->flags & USE_BIG_BUF) { |
| 748 |
start_pg = SOCKET_START_PG; |
| 749 |
stop_pg = SOCKET_STOP_PG; |
| 750 |
cm_offset = 0x10000; |
| 751 |
} else { |
| 752 |
start_pg = PCNET_START_PG; |
| 753 |
stop_pg = PCNET_STOP_PG; |
| 754 |
cm_offset = 0; |
| 755 |
} |
| 756 |
|
| 757 |
/* has_shmem is ignored if use_shmem != -1 */ |
| 758 |
if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) || |
| 759 |
(setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0)) |
| 760 |
setup_dma_config(link, start_pg, stop_pg); |
| 761 |
|
| 762 |
ei_status.name = "NE2000"; |
| 763 |
ei_status.word16 = 1; |
| 764 |
ei_status.reset_8390 = &pcnet_reset_8390; |
| 765 |
|
| 766 |
copy_dev_name(info->node, dev); |
| 767 |
link->dev = &info->node; |
| 768 |
|
| 769 |
if (info->flags & (IS_DL10019|IS_DL10022)) { |
| 770 |
u_char id = inb(dev->base_addr + 0x1a); |
| 771 |
dev->do_ioctl = &ei_ioctl; |
| 772 |
mii_phy_probe(dev); |
| 773 |
if ((id == 0x30) && !info->pna_phy && (info->eth_phy == 4)) |
| 774 |
info->eth_phy = 0; |
| 775 |
printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ", |
| 776 |
dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id); |
| 777 |
if (info->pna_phy) |
| 778 |
printk("PNA, "); |
| 779 |
} else |
| 780 |
printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name); |
| 781 |
printk("io %#3lx, irq %d,", dev->base_addr, dev->irq); |
| 782 |
if (info->flags & USE_SHMEM) |
| 783 |
printk (" mem %#5lx,", dev->mem_start); |
| 784 |
if (info->flags & HAS_MISC_REG) |
| 785 |
printk(" %s xcvr,", if_names[dev->if_port]); |
| 786 |
printk(" hw_addr "); |
| 787 |
for (i = 0; i < 6; i++) |
| 788 |
printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n")); |
| 789 |
link->state &= ~DEV_CONFIG_PENDING; |
| 790 |
return; |
| 791 |
|
| 792 |
cs_failed: |
| 793 |
cs_error(link->handle, last_fn, last_ret); |
| 794 |
failed: |
| 795 |
pcnet_release((u_long)link); |
| 796 |
link->state &= ~DEV_CONFIG_PENDING; |
| 797 |
return; |
| 798 |
} /* pcnet_config */ |
| 799 |
|
| 800 |
/*====================================================================== |
| 801 |
|
| 802 |
After a card is removed, pcnet_release() will unregister the net |
| 803 |
device, and release the PCMCIA configuration. If the device is |
| 804 |
still open, this will be postponed until it is closed. |
| 805 |
|
| 806 |
======================================================================*/ |
| 807 |
|
| 808 |
static void pcnet_release(u_long arg) |
| 809 |
{ |
| 810 |
dev_link_t *link = (dev_link_t *)arg; |
| 811 |
pcnet_dev_t *info = link->priv; |
| 812 |
|
| 813 |
DEBUG(0, "pcnet_release(0x%p)\n", link); |
| 814 |
|
| 815 |
if (link->open) { |
| 816 |
DEBUG(1, "pcnet_cs: release postponed, '%s' still open\n", |
| 817 |
info->node.dev_name); |
| 818 |
link->state |= DEV_STALE_CONFIG; |
| 819 |
return; |
| 820 |
} |
| 821 |
|
| 822 |
if (info->flags & USE_SHMEM) { |
| 823 |
iounmap(info->base); |
| 824 |
CardServices(ReleaseWindow, link->win); |
| 825 |
} |
| 826 |
CardServices(ReleaseConfiguration, link->handle); |
| 827 |
CardServices(ReleaseIO, link->handle, &link->io); |
| 828 |
CardServices(ReleaseIRQ, link->handle, &link->irq); |
| 829 |
|
| 830 |
link->state &= ~DEV_CONFIG; |
| 831 |
|
| 832 |
} /* pcnet_release */ |
| 833 |
|
| 834 |
/*====================================================================== |
| 835 |
|
| 836 |
The card status event handler. Mostly, this schedules other |
| 837 |
stuff to run after an event is received. A CARD_REMOVAL event |
| 838 |
also sets some flags to discourage the net drivers from trying |
| 839 |
to talk to the card any more. |
| 840 |
|
| 841 |
======================================================================*/ |
| 842 |
|
| 843 |
static int pcnet_event(event_t event, int priority, |
| 844 |
event_callback_args_t *args) |
| 845 |
{ |
| 846 |
dev_link_t *link = args->client_data; |
| 847 |
pcnet_dev_t *info = link->priv; |
| 848 |
|
| 849 |
DEBUG(2, "pcnet_event(0x%06x)\n", event); |
| 850 |
|
| 851 |
switch (event) { |
| 852 |
case CS_EVENT_CARD_REMOVAL: |
| 853 |
link->state &= ~DEV_PRESENT; |
| 854 |
if (link->state & DEV_CONFIG) { |
| 855 |
netif_device_detach(&info->dev); |
| 856 |
mod_timer(&link->release, jiffies + HZ/20); |
| 857 |
} |
| 858 |
break; |
| 859 |
case CS_EVENT_CARD_INSERTION: |
| 860 |
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; |
| 861 |
pcnet_config(link); |
| 862 |
break; |
| 863 |
case CS_EVENT_PM_SUSPEND: |
| 864 |
link->state |= DEV_SUSPEND; |
| 865 |
/* Fall through... */ |
| 866 |
case CS_EVENT_RESET_PHYSICAL: |
| 867 |
if (link->state & DEV_CONFIG) { |
| 868 |
if (link->open) |
| 869 |
netif_device_detach(&info->dev); |
| 870 |
CardServices(ReleaseConfiguration, link->handle); |
| 871 |
} |
| 872 |
break; |
| 873 |
case CS_EVENT_PM_RESUME: |
| 874 |
link->state &= ~DEV_SUSPEND; |
| 875 |
/* Fall through... */ |
| 876 |
case CS_EVENT_CARD_RESET: |
| 877 |
if (link->state & DEV_CONFIG) { |
| 878 |
CardServices(RequestConfiguration, link->handle, &link->conf); |
| 879 |
if (link->open) { |
| 880 |
pcnet_reset_8390(&info->dev); |
| 881 |
NS8390_init(&info->dev, 1); |
| 882 |
netif_device_attach(&info->dev); |
| 883 |
} |
| 884 |
} |
| 885 |
break; |
| 886 |
} |
| 887 |
return 0; |
| 888 |
} /* pcnet_event */ |
| 889 |
|
| 890 |
/*====================================================================== |
| 891 |
|
| 892 |
MII interface support for DL10019 and DL10022 based cards |
| 893 |
|
| 894 |
On the DL10019, the MII IO direction bit is 0x10; on the DL10022 |
| 895 |
it is 0x20. Setting both bits seems to work on both card types. |
| 896 |
|
| 897 |
======================================================================*/ |
| 898 |
|
| 899 |
#define DLINK_GPIO 0x1c |
| 900 |
#define DLINK_DIAG 0x1d |
| 901 |
#define DLINK_EEPROM 0x1e |
| 902 |
|
| 903 |
#define MDIO_SHIFT_CLK 0x80 |
| 904 |
#define MDIO_DATA_OUT 0x40 |
| 905 |
#define MDIO_DIR_WRITE 0x30 |
| 906 |
#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) |
| 907 |
#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) |
| 908 |
#define MDIO_DATA_READ 0x10 |
| 909 |
#define MDIO_MASK 0x0f |
| 910 |
|
| 911 |
static void mdio_sync(ioaddr_t addr) |
| 912 |
{ |
| 913 |
int bits, mask = inb(addr) & MDIO_MASK; |
| 914 |
for (bits = 0; bits < 32; bits++) { |
| 915 |
outb(mask | MDIO_DATA_WRITE1, addr); |
| 916 |
outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); |
| 917 |
} |
| 918 |
} |
| 919 |
|
| 920 |
static int mdio_read(ioaddr_t addr, int phy_id, int loc) |
| 921 |
{ |
| 922 |
u_int cmd = (0x06<<10)|(phy_id<<5)|loc; |
| 923 |
int i, retval = 0, mask = inb(addr) & MDIO_MASK; |
| 924 |
|
| 925 |
mdio_sync(addr); |
| 926 |
for (i = 13; i >= 0; i--) { |
| 927 |
int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; |
| 928 |
outb(mask | dat, addr); |
| 929 |
outb(mask | dat | MDIO_SHIFT_CLK, addr); |
| 930 |
} |
| 931 |
for (i = 19; i > 0; i--) { |
| 932 |
outb(mask, addr); |
| 933 |
retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); |
| 934 |
outb(mask | MDIO_SHIFT_CLK, addr); |
| 935 |
} |
| 936 |
return (retval>>1) & 0xffff; |
| 937 |
} |
| 938 |
|
| 939 |
static void mdio_write(ioaddr_t addr, int phy_id, int loc, int value) |
| 940 |
{ |
| 941 |
u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; |
| 942 |
int i, mask = inb(addr) & MDIO_MASK; |
| 943 |
|
| 944 |
mdio_sync(addr); |
| 945 |
for (i = 31; i >= 0; i--) { |
| 946 |
int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; |
| 947 |
outb(mask | dat, addr); |
| 948 |
outb(mask | dat | MDIO_SHIFT_CLK, addr); |
| 949 |
} |
| 950 |
for (i = 1; i >= 0; i--) { |
| 951 |
outb(mask, addr); |
| 952 |
outb(mask | MDIO_SHIFT_CLK, addr); |
| 953 |
} |
| 954 |
} |
| 955 |
|
| 956 |
static void mdio_reset(ioaddr_t addr, int phy_id) |
| 957 |
{ |
| 958 |
outb_p(0x08, addr); |
| 959 |
outb_p(0x0c, addr); |
| 960 |
outb_p(0x08, addr); |
| 961 |
outb_p(0x0c, addr); |
| 962 |
outb_p(0x00, addr); |
| 963 |
} |
| 964 |
|
| 965 |
/*====================================================================== |
| 966 |
|
| 967 |
EEPROM access routines for DL10019 and DL10022 based cards |
| 968 |
|
| 969 |
======================================================================*/ |
| 970 |
|
| 971 |
#define EE_EEP 0x40 |
| 972 |
#define EE_ASIC 0x10 |
| 973 |
#define EE_CS 0x08 |
| 974 |
#define EE_CK 0x04 |
| 975 |
#define EE_DO 0x02 |
| 976 |
#define EE_DI 0x01 |
| 977 |
#define EE_ADOT 0x01 /* DataOut for ASIC */ |
| 978 |
#define EE_READ_CMD 0x06 |
| 979 |
|
| 980 |
#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */ |
| 981 |
|
| 982 |
static int read_eeprom(ioaddr_t ioaddr, int location) |
| 983 |
{ |
| 984 |
int i, retval = 0; |
| 985 |
ioaddr_t ee_addr = ioaddr + DLINK_EEPROM; |
| 986 |
int read_cmd = location | (EE_READ_CMD << 8); |
| 987 |
|
| 988 |
outb(0, ee_addr); |
| 989 |
outb(EE_EEP|EE_CS, ee_addr); |
| 990 |
|
| 991 |
/* Shift the read command bits out. */ |
| 992 |
for (i = 10; i >= 0; i--) { |
| 993 |
short dataval = (read_cmd & (1 << i)) ? EE_DO : 0; |
| 994 |
outb_p(EE_EEP|EE_CS|dataval, ee_addr); |
| 995 |
outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr); |
| 996 |
} |
| 997 |
outb(EE_EEP|EE_CS, ee_addr); |
| 998 |
|
| 999 |
for (i = 16; i > 0; i--) { |
| 1000 |
outb_p(EE_EEP|EE_CS | EE_CK, ee_addr); |
| 1001 |
retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0); |
| 1002 |
outb_p(EE_EEP|EE_CS, ee_addr); |
| 1003 |
} |
| 1004 |
|
| 1005 |
/* Terminate the EEPROM access. */ |
| 1006 |
outb(0, ee_addr); |
| 1007 |
return retval; |
| 1008 |
} |
| 1009 |
|
| 1010 |
/* |
| 1011 |
The internal ASIC registers can be changed by EEPROM READ access |
| 1012 |
with EE_ASIC bit set. |
| 1013 |
In ASIC mode, EE_ADOT is used to output the data to the ASIC. |
| 1014 |
*/ |
| 1015 |
|
| 1016 |
static void write_asic(ioaddr_t ioaddr, int location, short asic_data) |
| 1017 |
{ |
| 1018 |
int i; |
| 1019 |
ioaddr_t ee_addr = ioaddr + DLINK_EEPROM; |
| 1020 |
short dataval; |
| 1021 |
int read_cmd = location | (EE_READ_CMD << 8); |
| 1022 |
|
| 1023 |
asic_data |= read_eeprom(ioaddr, location); |
| 1024 |
|
| 1025 |
outb(0, ee_addr); |
| 1026 |
outb(EE_ASIC|EE_CS|EE_DI, ee_addr); |
| 1027 |
|
| 1028 |
read_cmd = read_cmd >> 1; |
| 1029 |
|
| 1030 |
/* Shift the read command bits out. */ |
| 1031 |
for (i = 9; i >= 0; i--) { |
| 1032 |
dataval = (read_cmd & (1 << i)) ? EE_DO : 0; |
| 1033 |
outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); |
| 1034 |
outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr); |
| 1035 |
outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr); |
| 1036 |
} |
| 1037 |
// sync |
| 1038 |
outb(EE_ASIC|EE_CS, ee_addr); |
| 1039 |
outb(EE_ASIC|EE_CS|EE_CK, ee_addr); |
| 1040 |
outb(EE_ASIC|EE_CS, ee_addr); |
| 1041 |
|
| 1042 |
for (i = 15; i >= 0; i--) { |
| 1043 |
dataval = (asic_data & (1 << i)) ? EE_ADOT : 0; |
| 1044 |
outb_p(EE_ASIC|EE_CS|dataval, ee_addr); |
| 1045 |
outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr); |
| 1046 |
outb_p(EE_ASIC|EE_CS|dataval, ee_addr); |
| 1047 |
} |
| 1048 |
|
| 1049 |
/* Terminate the ASIC access. */ |
| 1050 |
outb(EE_ASIC|EE_DI, ee_addr); |
| 1051 |
outb(EE_ASIC|EE_DI| EE_CK, ee_addr); |
| 1052 |
outb(EE_ASIC|EE_DI, ee_addr); |
| 1053 |
|
| 1054 |
outb(0, ee_addr); |
| 1055 |
} |
| 1056 |
|
| 1057 |
/*====================================================================*/ |
| 1058 |
|
| 1059 |
static void set_misc_reg(struct net_device *dev) |
| 1060 |
{ |
| 1061 |
ioaddr_t nic_base = dev->base_addr; |
| 1062 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1063 |
u_char tmp; |
| 1064 |
|
| 1065 |
if (info->flags & HAS_MISC_REG) { |
| 1066 |
tmp = inb_p(nic_base + PCNET_MISC) & ~3; |
| 1067 |
if (dev->if_port == 2) |
| 1068 |
tmp |= 1; |
| 1069 |
if (info->flags & USE_BIG_BUF) |
| 1070 |
tmp |= 2; |
| 1071 |
if (info->flags & HAS_IBM_MISC) |
| 1072 |
tmp |= 8; |
| 1073 |
outb_p(tmp, nic_base + PCNET_MISC); |
| 1074 |
} |
| 1075 |
if (info->flags & IS_DL10022) { |
| 1076 |
if (info->flags & HAS_MII) { |
| 1077 |
mdio_reset(nic_base + DLINK_GPIO, info->eth_phy); |
| 1078 |
/* Restart MII autonegotiation */ |
| 1079 |
mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000); |
| 1080 |
mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200); |
| 1081 |
info->mii_reset = jiffies; |
| 1082 |
} else { |
| 1083 |
outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG); |
| 1084 |
} |
| 1085 |
} |
| 1086 |
} |
| 1087 |
|
| 1088 |
/*====================================================================*/ |
| 1089 |
|
| 1090 |
static void mii_phy_probe(struct net_device *dev) |
| 1091 |
{ |
| 1092 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1093 |
ioaddr_t mii_addr = dev->base_addr + DLINK_GPIO; |
| 1094 |
int i; |
| 1095 |
u_int tmp, phyid; |
| 1096 |
|
| 1097 |
for (i = 31; i >= 0; i--) { |
| 1098 |
tmp = mdio_read(mii_addr, i, 1); |
| 1099 |
if ((tmp == 0) || (tmp == 0xffff)) |
| 1100 |
continue; |
| 1101 |
tmp = mdio_read(mii_addr, i, MII_PHYID_REG1); |
| 1102 |
phyid = tmp << 16; |
| 1103 |
phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2); |
| 1104 |
phyid &= MII_PHYID_REV_MASK; |
| 1105 |
DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid); |
| 1106 |
if (phyid == AM79C9XX_HOME_PHY) { |
| 1107 |
info->pna_phy = i; |
| 1108 |
} else if (phyid != AM79C9XX_ETH_PHY) { |
| 1109 |
info->eth_phy = i; |
| 1110 |
} |
| 1111 |
} |
| 1112 |
} |
| 1113 |
|
| 1114 |
static int pcnet_open(struct net_device *dev) |
| 1115 |
{ |
| 1116 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1117 |
dev_link_t *link = &info->link; |
| 1118 |
|
| 1119 |
DEBUG(2, "pcnet_open('%s')\n", dev->name); |
| 1120 |
|
| 1121 |
if (!DEV_OK(link)) |
| 1122 |
return -ENODEV; |
| 1123 |
|
| 1124 |
link->open++; |
| 1125 |
MOD_INC_USE_COUNT; |
| 1126 |
|
| 1127 |
set_misc_reg(dev); |
| 1128 |
request_irq(dev->irq, ei_irq_wrapper, SA_SHIRQ, dev_info, dev); |
| 1129 |
|
| 1130 |
info->phy_id = info->eth_phy; |
| 1131 |
info->link_status = 0x00; |
| 1132 |
info->watchdog.function = &ei_watchdog; |
| 1133 |
info->watchdog.data = (u_long)info; |
| 1134 |
info->watchdog.expires = jiffies + HZ; |
| 1135 |
add_timer(&info->watchdog); |
| 1136 |
|
| 1137 |
return ei_open(dev); |
| 1138 |
} /* pcnet_open */ |
| 1139 |
|
| 1140 |
/*====================================================================*/ |
| 1141 |
|
| 1142 |
static int pcnet_close(struct net_device *dev) |
| 1143 |
{ |
| 1144 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1145 |
dev_link_t *link = &info->link; |
| 1146 |
|
| 1147 |
DEBUG(2, "pcnet_close('%s')\n", dev->name); |
| 1148 |
|
| 1149 |
ei_close(dev); |
| 1150 |
free_irq(dev->irq, dev); |
| 1151 |
|
| 1152 |
link->open--; |
| 1153 |
netif_stop_queue(dev); |
| 1154 |
netif_mark_down(dev); |
| 1155 |
del_timer(&info->watchdog); |
| 1156 |
if (link->state & DEV_STALE_CONFIG) |
| 1157 |
mod_timer(&link->release, jiffies + HZ/20); |
| 1158 |
|
| 1159 |
MOD_DEC_USE_COUNT; |
| 1160 |
|
| 1161 |
return 0; |
| 1162 |
} /* pcnet_close */ |
| 1163 |
|
| 1164 |
/*====================================================================== |
| 1165 |
|
| 1166 |
Hard reset the card. This used to pause for the same period that |
| 1167 |
a 8390 reset command required, but that shouldn't be necessary. |
| 1168 |
|
| 1169 |
======================================================================*/ |
| 1170 |
|
| 1171 |
static void pcnet_reset_8390(struct net_device *dev) |
| 1172 |
{ |
| 1173 |
ioaddr_t nic_base = dev->base_addr; |
| 1174 |
int i; |
| 1175 |
|
| 1176 |
ei_status.txing = ei_status.dmaing = 0; |
| 1177 |
|
| 1178 |
outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD); |
| 1179 |
|
| 1180 |
outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET); |
| 1181 |
|
| 1182 |
for (i = 0; i < 100; i++) { |
| 1183 |
if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0) |
| 1184 |
break; |
| 1185 |
udelay(100); |
| 1186 |
} |
| 1187 |
outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */ |
| 1188 |
|
| 1189 |
if (i == 100) |
| 1190 |
printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n", |
| 1191 |
dev->name); |
| 1192 |
set_misc_reg(dev); |
| 1193 |
|
| 1194 |
} /* pcnet_reset_8390 */ |
| 1195 |
|
| 1196 |
/*====================================================================*/ |
| 1197 |
|
| 1198 |
static int set_config(struct net_device *dev, struct ifmap *map) |
| 1199 |
{ |
| 1200 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1201 |
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { |
| 1202 |
if (!(info->flags & HAS_MISC_REG)) |
| 1203 |
return -EOPNOTSUPP; |
| 1204 |
else if ((map->port < 1) || (map->port > 2)) |
| 1205 |
return -EINVAL; |
| 1206 |
dev->if_port = map->port; |
| 1207 |
printk(KERN_INFO "%s: switched to %s port\n", |
| 1208 |
dev->name, if_names[dev->if_port]); |
| 1209 |
NS8390_init(dev, 1); |
| 1210 |
} |
| 1211 |
return 0; |
| 1212 |
} |
| 1213 |
|
| 1214 |
/*====================================================================*/ |
| 1215 |
|
| 1216 |
static void ei_irq_wrapper(int irq, void *dev_id, struct pt_regs *regs) |
| 1217 |
{ |
| 1218 |
pcnet_dev_t *info = dev_id; |
| 1219 |
info->stale = 0; |
| 1220 |
ei_interrupt(irq, dev_id, regs); |
| 1221 |
} |
| 1222 |
|
| 1223 |
static void ei_watchdog(u_long arg) |
| 1224 |
{ |
| 1225 |
pcnet_dev_t *info = (pcnet_dev_t *)(arg); |
| 1226 |
struct net_device *dev = &info->dev; |
| 1227 |
ioaddr_t nic_base = dev->base_addr; |
| 1228 |
ioaddr_t mii_addr = nic_base + DLINK_GPIO; |
| 1229 |
u_short link; |
| 1230 |
|
| 1231 |
if (!netif_device_present(dev)) goto reschedule; |
| 1232 |
|
| 1233 |
/* Check for pending interrupt with expired latency timer: with |
| 1234 |
this, we can limp along even if the interrupt is blocked */ |
| 1235 |
outb_p(E8390_NODMA+E8390_PAGE0, nic_base + E8390_CMD); |
| 1236 |
if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) { |
| 1237 |
if (!info->fast_poll) |
| 1238 |
printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name); |
| 1239 |
ei_irq_wrapper(dev->irq, dev, NULL); |
| 1240 |
info->fast_poll = HZ; |
| 1241 |
} |
| 1242 |
if (info->fast_poll) { |
| 1243 |
info->fast_poll--; |
| 1244 |
info->watchdog.expires = jiffies + 1; |
| 1245 |
add_timer(&info->watchdog); |
| 1246 |
return; |
| 1247 |
} |
| 1248 |
|
| 1249 |
if (!(info->flags & HAS_MII)) |
| 1250 |
goto reschedule; |
| 1251 |
|
| 1252 |
mdio_read(mii_addr, info->phy_id, 1); |
| 1253 |
link = mdio_read(mii_addr, info->phy_id, 1); |
| 1254 |
if (!link || (link == 0xffff)) { |
| 1255 |
if (info->eth_phy) { |
| 1256 |
info->phy_id = info->eth_phy = 0; |
| 1257 |
} else { |
| 1258 |
printk(KERN_INFO "%s: MII is missing!\n", dev->name); |
| 1259 |
info->flags &= ~HAS_MII; |
| 1260 |
} |
| 1261 |
goto reschedule; |
| 1262 |
} |
| 1263 |
|
| 1264 |
link &= 0x0004; |
| 1265 |
if (link != info->link_status) { |
| 1266 |
u_short p = mdio_read(mii_addr, info->phy_id, 5); |
| 1267 |
printk(KERN_INFO "%s: %s link beat\n", dev->name, |
| 1268 |
(link) ? "found" : "lost"); |
| 1269 |
if (link && (info->flags & IS_DL10022)) { |
| 1270 |
/* Disable collision detection on full duplex links */ |
| 1271 |
outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG); |
| 1272 |
} else if (link && (info->flags & IS_DL10019)) { |
| 1273 |
/* Disable collision detection on full duplex links */ |
| 1274 |
write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0); |
| 1275 |
} |
| 1276 |
if (link) { |
| 1277 |
if (info->phy_id == info->eth_phy) { |
| 1278 |
if (p) |
| 1279 |
printk(KERN_INFO "%s: autonegotiation complete: " |
| 1280 |
"%sbaseT-%cD selected\n", dev->name, |
| 1281 |
((p & 0x0180) ? "100" : "10"), |
| 1282 |
((p & 0x0140) ? 'F' : 'H')); |
| 1283 |
else |
| 1284 |
printk(KERN_INFO "%s: link partner did not " |
| 1285 |
"autonegotiate\n", dev->name); |
| 1286 |
} |
| 1287 |
NS8390_init(dev, 1); |
| 1288 |
} |
| 1289 |
info->link_status = link; |
| 1290 |
} |
| 1291 |
if (info->pna_phy && (jiffies - info->mii_reset > 6*HZ)) { |
| 1292 |
link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004; |
| 1293 |
if (((info->phy_id == info->pna_phy) && link) || |
| 1294 |
((info->phy_id != info->pna_phy) && !link)) { |
| 1295 |
/* isolate this MII and try flipping to the other one */ |
| 1296 |
mdio_write(mii_addr, info->phy_id, 0, 0x0400); |
| 1297 |
info->phy_id ^= info->pna_phy ^ info->eth_phy; |
| 1298 |
printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name, |
| 1299 |
(info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); |
| 1300 |
mdio_write(mii_addr, info->phy_id, 0, |
| 1301 |
(info->phy_id == info->eth_phy) ? 0x1000 : 0); |
| 1302 |
info->link_status = 0; |
| 1303 |
info->mii_reset = jiffies; |
| 1304 |
} |
| 1305 |
} |
| 1306 |
|
| 1307 |
reschedule: |
| 1308 |
info->watchdog.expires = jiffies + HZ; |
| 1309 |
add_timer(&info->watchdog); |
| 1310 |
} |
| 1311 |
|
| 1312 |
/*====================================================================*/ |
| 1313 |
|
| 1314 |
static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| 1315 |
{ |
| 1316 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1317 |
u16 *data = (u16 *)&rq->ifr_data; |
| 1318 |
ioaddr_t mii_addr = dev->base_addr + DLINK_GPIO; |
| 1319 |
switch (cmd) { |
| 1320 |
case SIOCDEVPRIVATE: |
| 1321 |
data[0] = info->phy_id; |
| 1322 |
case SIOCDEVPRIVATE+1: |
| 1323 |
data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f); |
| 1324 |
return 0; |
| 1325 |
case SIOCDEVPRIVATE+2: |
| 1326 |
if (!capable(CAP_NET_ADMIN)) |
| 1327 |
return -EPERM; |
| 1328 |
mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]); |
| 1329 |
return 0; |
| 1330 |
} |
| 1331 |
return -EOPNOTSUPP; |
| 1332 |
} |
| 1333 |
|
| 1334 |
/*====================================================================*/ |
| 1335 |
|
| 1336 |
static void dma_get_8390_hdr(struct net_device *dev, |
| 1337 |
struct e8390_pkt_hdr *hdr, |
| 1338 |
int ring_page) |
| 1339 |
{ |
| 1340 |
ioaddr_t nic_base = dev->base_addr; |
| 1341 |
|
| 1342 |
if (ei_status.dmaing) { |
| 1343 |
printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input." |
| 1344 |
"[DMAstat:%1x][irqlock:%1x]\n", |
| 1345 |
dev->name, ei_status.dmaing, ei_status.irqlock); |
| 1346 |
return; |
| 1347 |
} |
| 1348 |
|
| 1349 |
ei_status.dmaing |= 0x01; |
| 1350 |
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); |
| 1351 |
outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO); |
| 1352 |
outb_p(0, nic_base + EN0_RCNTHI); |
| 1353 |
outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */ |
| 1354 |
outb_p(ring_page, nic_base + EN0_RSARHI); |
| 1355 |
outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); |
| 1356 |
|
| 1357 |
insw(nic_base + PCNET_DATAPORT, hdr, |
| 1358 |
sizeof(struct e8390_pkt_hdr)>>1); |
| 1359 |
/* Fix for big endian systems */ |
| 1360 |
hdr->count = le16_to_cpu(hdr->count); |
| 1361 |
|
| 1362 |
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ |
| 1363 |
ei_status.dmaing &= ~0x01; |
| 1364 |
} |
| 1365 |
|
| 1366 |
/*====================================================================*/ |
| 1367 |
|
| 1368 |
static void dma_block_input(struct net_device *dev, int count, |
| 1369 |
struct sk_buff *skb, int ring_offset) |
| 1370 |
{ |
| 1371 |
ioaddr_t nic_base = dev->base_addr; |
| 1372 |
int xfer_count = count; |
| 1373 |
char *buf = skb->data; |
| 1374 |
|
| 1375 |
#ifdef PCMCIA_DEBUG |
| 1376 |
if ((ei_debug > 4) && (count != 4)) |
| 1377 |
printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4); |
| 1378 |
#endif |
| 1379 |
if (ei_status.dmaing) { |
| 1380 |
printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input." |
| 1381 |
"[DMAstat:%1x][irqlock:%1x]\n", |
| 1382 |
dev->name, ei_status.dmaing, ei_status.irqlock); |
| 1383 |
return; |
| 1384 |
} |
| 1385 |
ei_status.dmaing |= 0x01; |
| 1386 |
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD); |
| 1387 |
outb_p(count & 0xff, nic_base + EN0_RCNTLO); |
| 1388 |
outb_p(count >> 8, nic_base + EN0_RCNTHI); |
| 1389 |
outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); |
| 1390 |
outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); |
| 1391 |
outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD); |
| 1392 |
|
| 1393 |
insw(nic_base + PCNET_DATAPORT,buf,count>>1); |
| 1394 |
if (count & 0x01) |
| 1395 |
buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++; |
| 1396 |
|
| 1397 |
/* This was for the ALPHA version only, but enough people have |
| 1398 |
encountering problems that it is still here. */ |
| 1399 |
#ifdef PCMCIA_DEBUG |
| 1400 |
if (ei_debug > 4) { /* DMA termination address check... */ |
| 1401 |
int addr, tries = 20; |
| 1402 |
do { |
| 1403 |
/* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here |
| 1404 |
-- it's broken for Rx on some cards! */ |
| 1405 |
int high = inb_p(nic_base + EN0_RSARHI); |
| 1406 |
int low = inb_p(nic_base + EN0_RSARLO); |
| 1407 |
addr = (high << 8) + low; |
| 1408 |
if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff)) |
| 1409 |
break; |
| 1410 |
} while (--tries > 0); |
| 1411 |
if (tries <= 0) |
| 1412 |
printk(KERN_NOTICE "%s: RX transfer address mismatch," |
| 1413 |
"%#4.4x (expected) vs. %#4.4x (actual).\n", |
| 1414 |
dev->name, ring_offset + xfer_count, addr); |
| 1415 |
} |
| 1416 |
#endif |
| 1417 |
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ |
| 1418 |
ei_status.dmaing &= ~0x01; |
| 1419 |
} /* dma_block_input */ |
| 1420 |
|
| 1421 |
/*====================================================================*/ |
| 1422 |
|
| 1423 |
static void dma_block_output(struct net_device *dev, int count, |
| 1424 |
const u_char *buf, const int start_page) |
| 1425 |
{ |
| 1426 |
ioaddr_t nic_base = dev->base_addr; |
| 1427 |
pcnet_dev_t *info = (pcnet_dev_t *)dev; |
| 1428 |
#ifdef PCMCIA_DEBUG |
| 1429 |
int retries = 0; |
| 1430 |
#endif |
| 1431 |
u_long dma_start; |
| 1432 |
|
| 1433 |
#ifdef PCMCIA_DEBUG |
| 1434 |
if (ei_debug > 4) |
| 1435 |
printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count); |
| 1436 |
#endif |
| 1437 |
|
| 1438 |
/* Round the count up for word writes. Do we need to do this? |
| 1439 |
What effect will an odd byte count have on the 8390? |
| 1440 |
I should check someday. */ |
| 1441 |
if (count & 0x01) |
| 1442 |
count++; |
| 1443 |
if (ei_status.dmaing) { |
| 1444 |
printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output." |
| 1445 |
"[DMAstat:%1x][irqlock:%1x]\n", |
| 1446 |
dev->name, ei_status.dmaing, ei_status.irqlock); |
| 1447 |
return; |
| 1448 |
} |
| 1449 |
ei_status.dmaing |= 0x01; |
| 1450 |
/* We should already be in page 0, but to be safe... */ |
| 1451 |
outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD); |
| 1452 |
|
| 1453 |
#ifdef PCMCIA_DEBUG |
| 1454 |
retry: |
| 1455 |
#endif |
| 1456 |
|
| 1457 |
outb_p(ENISR_RDC, nic_base + EN0_ISR); |
| 1458 |
|
| 1459 |
/* Now the normal output. */ |
| 1460 |
outb_p(count & 0xff, nic_base + EN0_RCNTLO); |
| 1461 |
outb_p(count >> 8, nic_base + EN0_RCNTHI); |
| 1462 |
outb_p(0x00, nic_base + EN0_RSARLO); |
| 1463 |
outb_p(start_page, nic_base + EN0_RSARHI); |
| 1464 |
|
| 1465 |
outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD); |
| 1466 |
outsw(nic_base + PCNET_DATAPORT, buf, count>>1); |
| 1467 |
|
| 1468 |
dma_start = jiffies; |
| 1469 |
|
| 1470 |
#ifdef PCMCIA_DEBUG |
| 1471 |
/* This was for the ALPHA version only, but enough people have |
| 1472 |
encountering problems that it is still here. */ |
| 1473 |
if (ei_debug > 4) { /* DMA termination address check... */ |
| 1474 |
int addr, tries = 20; |
| 1475 |
do { |
| 1476 |
int high = inb_p(nic_base + EN0_RSARHI); |
| 1477 |
int low = inb_p(nic_base + EN0_RSARLO); |
| 1478 |
addr = (high << 8) + low; |
| 1479 |
if ((start_page << 8) + count == addr) |
| 1480 |
break; |
| 1481 |
} while (--tries > 0); |
| 1482 |
if (tries <= 0) { |
| 1483 |
printk(KERN_NOTICE "%s: Tx packet transfer address mismatch," |
| 1484 |
"%#4.4x (expected) vs. %#4.4x (actual).\n", |
| 1485 |
dev->name, (start_page << 8) + count, addr); |
| 1486 |
if (retries++ == 0) |
| 1487 |
goto retry; |
| 1488 |
} |
| 1489 |
} |
| 1490 |
#endif |
| 1491 |
|
| 1492 |
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) |
| 1493 |
if (jiffies - dma_start > PCNET_RDC_TIMEOUT) { |
| 1494 |
printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n", |
| 1495 |
dev->name); |
| 1496 |
pcnet_reset_8390(dev); |
| 1497 |
NS8390_init(dev, 1); |
| 1498 |
break; |
| 1499 |
} |
| 1500 |
|
| 1501 |
outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ |
| 1502 |
if (info->flags & DELAY_OUTPUT) |
| 1503 |
udelay((long)delay_time); |
| 1504 |
ei_status.dmaing &= ~0x01; |
| 1505 |
} |
| 1506 |
|
| 1507 |
/*====================================================================*/ |
| 1508 |
|
| 1509 |
static int setup_dma_config(dev_link_t *link, int start_pg, |
| 1510 |
int stop_pg) |
| 1511 |
{ |
| 1512 |
struct net_device *dev = link->priv; |
| 1513 |
|
| 1514 |
ei_status.tx_start_page = start_pg; |
| 1515 |
ei_status.rx_start_page = start_pg + TX_PAGES; |
| 1516 |
ei_status.stop_page = stop_pg; |
| 1517 |
|
| 1518 |
/* set up block i/o functions */ |
| 1519 |
ei_status.get_8390_hdr = &dma_get_8390_hdr; |
| 1520 |
ei_status.block_input = &dma_block_input; |
| 1521 |
ei_status.block_output = &dma_block_output; |
| 1522 |
|
| 1523 |
return 0; |
| 1524 |
} |
| 1525 |
|
| 1526 |
/*====================================================================*/ |
| 1527 |
|
| 1528 |
static void copyin(u_char *dest, u_char *src, int c) |
| 1529 |
{ |
| 1530 |
u_short *d = (u_short *)dest, *s = (u_short *)src; |
| 1531 |
int odd; |
| 1532 |
|
| 1533 |
if (c <= 0) |
| 1534 |
return; |
| 1535 |
odd = (c & 1); c >>= 1; |
| 1536 |
|
| 1537 |
if (c) { |
| 1538 |
do { *d++ = readw_ns(s++); } while (--c); |
| 1539 |
} |
| 1540 |
/* get last byte by fetching a word and masking */ |
| 1541 |
if (odd) |
| 1542 |
*((u_char *)d) = readw(s) & 0xff; |
| 1543 |
} |
| 1544 |
|
| 1545 |
static void copyout(u_char *dest, const u_char *src, int c) |
| 1546 |
{ |
| 1547 |
u_short *d = (u_short *)dest, *s = (u_short *)src; |
| 1548 |
int odd; |
| 1549 |
|
| 1550 |
if (c <= 0) |
| 1551 |
return; |
| 1552 |
odd = (c & 1); c >>= 1; |
| 1553 |
|
| 1554 |
if (c) { |
| 1555 |
do { writew_ns(*s++, d++); } while (--c); |
| 1556 |
} |
| 1557 |
/* copy last byte doing a read-modify-write */ |
| 1558 |
if (odd) |
| 1559 |
writew((readw(d) & 0xff00) | *(u_char *)s, d); |
| 1560 |
} |
| 1561 |
|
| 1562 |
/*====================================================================*/ |
| 1563 |
|
| 1564 |
static void shmem_get_8390_hdr(struct net_device *dev, |
| 1565 |
struct e8390_pkt_hdr *hdr, |
| 1566 |
int ring_page) |
| 1567 |
{ |
| 1568 |
void *xfer_start = (void *)(dev->rmem_start + (ring_page << 8) |
| 1569 |
- (ei_status.rx_start_page << 8)); |
| 1570 |
|
| 1571 |
copyin((void *)hdr, xfer_start, sizeof(struct e8390_pkt_hdr)); |
| 1572 |
/* Fix for big endian systems */ |
| 1573 |
hdr->count = le16_to_cpu(hdr->count); |
| 1574 |
} |
| 1575 |
|
| 1576 |
/*====================================================================*/ |
| 1577 |
|
| 1578 |
static void shmem_block_input(struct net_device *dev, int count, |
| 1579 |
struct sk_buff *skb, int ring_offset) |
| 1580 |
{ |
| 1581 |
void *xfer_start = (void *)(dev->rmem_start + ring_offset |
| 1582 |
- (ei_status.rx_start_page << 8)); |
| 1583 |
char *buf = skb->data; |
| 1584 |
|
| 1585 |
if (xfer_start + count > (void *)dev->rmem_end) { |
| 1586 |
/* We must wrap the input move. */ |
| 1587 |
int semi_count = (void*)dev->rmem_end - xfer_start; |
| 1588 |
copyin(buf, xfer_start, semi_count); |
| 1589 |
buf += semi_count; |
| 1590 |
ring_offset = ei_status.rx_start_page << 8; |
| 1591 |
xfer_start = (void *)dev->rmem_start; |
| 1592 |
count -= semi_count; |
| 1593 |
} |
| 1594 |
copyin(buf, xfer_start, count); |
| 1595 |
} |
| 1596 |
|
| 1597 |
/*====================================================================*/ |
| 1598 |
|
| 1599 |
static void shmem_block_output(struct net_device *dev, int count, |
| 1600 |
const u_char *buf, const int start_page) |
| 1601 |
{ |
| 1602 |
void *shmem = (void *)dev->mem_start + (start_page << 8); |
| 1603 |
shmem -= ei_status.tx_start_page << 8; |
| 1604 |
copyout(shmem, buf, count); |
| 1605 |
} |
| 1606 |
|
| 1607 |
/*====================================================================*/ |
| 1608 |
|
| 1609 |
static int setup_shmem_window(dev_link_t *link, int start_pg, |
| 1610 |
int stop_pg, int cm_offset) |
| 1611 |
{ |
| 1612 |
struct net_device *dev = link->priv; |
| 1613 |
pcnet_dev_t *info = link->priv; |
| 1614 |
win_req_t req; |
| 1615 |
memreq_t mem; |
| 1616 |
int i, window_size, offset, last_ret, last_fn; |
| 1617 |
|
| 1618 |
window_size = (stop_pg - start_pg) << 8; |
| 1619 |
if (window_size > 32 * 1024) |
| 1620 |
window_size = 32 * 1024; |
| 1621 |
|
| 1622 |
/* Make sure it's a power of two. */ |
| 1623 |
while ((window_size & (window_size - 1)) != 0) |
| 1624 |
window_size += window_size & ~(window_size - 1); |
| 1625 |
|
| 1626 |
/* Allocate a memory window */ |
| 1627 |
req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; |
| 1628 |
req.Attributes |= WIN_USE_WAIT; |
| 1629 |
req.Base = 0; req.Size = window_size; |
| 1630 |
req.AccessSpeed = mem_speed; |
| 1631 |
link->win = (window_handle_t)link->handle; |
| 1632 |
CS_CHECK(RequestWindow, &link->win, &req); |
| 1633 |
|
| 1634 |
mem.CardOffset = (start_pg << 8) + cm_offset; |
| 1635 |
offset = mem.CardOffset % window_size; |
| 1636 |
mem.CardOffset -= offset; |
| 1637 |
mem.Page = 0; |
| 1638 |
CS_CHECK(MapMemPage, link->win, &mem); |
| 1639 |
|
| 1640 |
/* Try scribbling on the buffer */ |
| 1641 |
info->base = ioremap(req.Base, window_size); |
| 1642 |
for (i = 0; i < (TX_PAGES<<8); i += 2) |
| 1643 |
writew_ns((i>>1), info->base+offset+i); |
| 1644 |
udelay(100); |
| 1645 |
for (i = 0; i < (TX_PAGES<<8); i += 2) |
| 1646 |
if (readw_ns(info->base+offset+i) != (i>>1)) break; |
| 1647 |
pcnet_reset_8390(dev); |
| 1648 |
if (i != (TX_PAGES<<8)) { |
| 1649 |
iounmap(info->base); |
| 1650 |
CardServices(ReleaseWindow, link->win); |
| 1651 |
info->base = NULL; link->win = NULL; |
| 1652 |
goto failed; |
| 1653 |
} |
| 1654 |
|
| 1655 |
dev->mem_start = (u_long)info->base + offset; |
| 1656 |
dev->rmem_start = dev->mem_start + (TX_PAGES<<8); |
| 1657 |
dev->mem_end = dev->rmem_end = (u_long)info->base + req.Size; |
| 1658 |
|
| 1659 |
ei_status.tx_start_page = start_pg; |
| 1660 |
ei_status.rx_start_page = start_pg + TX_PAGES; |
| 1661 |
ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); |
| 1662 |
|
| 1663 |
/* set up block i/o functions */ |
| 1664 |
ei_status.get_8390_hdr = &shmem_get_8390_hdr; |
| 1665 |
ei_status.block_input = &shmem_block_input; |
| 1666 |
ei_status.block_output = &shmem_block_output; |
| 1667 |
|
| 1668 |
info->flags |= USE_SHMEM; |
| 1669 |
return 0; |
| 1670 |
|
| 1671 |
cs_failed: |
| 1672 |
cs_error(link->handle, last_fn, last_ret); |
| 1673 |
failed: |
| 1674 |
return 1; |
| 1675 |
} |
| 1676 |
|
| 1677 |
/*====================================================================*/ |
| 1678 |
|
| 1679 |
static int __init init_pcnet_cs(void) |
| 1680 |
{ |
| 1681 |
servinfo_t serv; |
| 1682 |
DEBUG(0, "%s\n", version); |
| 1683 |
CardServices(GetCardServicesInfo, &serv); |
| 1684 |
if (serv.Revision != CS_RELEASE_CODE) { |
| 1685 |
printk(KERN_NOTICE "pcnet_cs: Card Services release " |
| 1686 |
"does not match!\n"); |
| 1687 |
return -EINVAL; |
| 1688 |
} |
| 1689 |
register_pccard_driver(&dev_info, &pcnet_attach, &pcnet_detach); |
| 1690 |
return 0; |
| 1691 |
} |
| 1692 |
|
| 1693 |
static void __exit exit_pcnet_cs(void) |
| 1694 |
{ |
| 1695 |
DEBUG(0, "pcnet_cs: unloading\n"); |
| 1696 |
unregister_pccard_driver(&dev_info); |
| 1697 |
while (dev_list != NULL) |
| 1698 |
pcnet_detach(dev_list); |
| 1699 |
} |
| 1700 |
|
| 1701 |
module_init(init_pcnet_cs); |
| 1702 |
module_exit(exit_pcnet_cs); |