| 1 |
.. 4.5 |
| 2 |
|
| 3 |
Différenciation et intégration RC |
| 4 |
--------------------------------- |
| 5 |
|
| 6 |
**Objectif** |
| 7 |
|
| 8 |
Les circuits RC peuvent intégrer ou différencier un signal de tension |
| 9 |
par rapport au temps. Si on intègre un signal carré on obtient un signal |
| 10 |
triangulaire et si on différencie on obtient des pics aux |
| 11 |
transitions. |
| 12 |
|
| 13 |
.. image:: schematics/RCintegration.svg |
| 14 |
:width: 300px |
| 15 |
.. image:: schematics/RCsteadystate.svg |
| 16 |
:width: 300px |
| 17 |
|
| 18 |
**Procédure** |
| 19 |
|
| 20 |
- Sélectionner l’option signal triangulaire pour WG |
| 21 |
- Régler WG à 500 Hz (:math:`T = 2~ms`), :math:`R = 1~k\Omega` et :math:`C = 1~\mu F` |
| 22 |
- Ajuster l’échelle horizontale pour voir plus de quatre cycles. |
| 23 |
- Recommencer la même chose pour le différenciateur RC, à :math:`50~Hz`. |
| 24 |
|
| 25 |
**Discussion** |
| 26 |
|
| 27 |
L’intégration d’un signal triangulaire donne une forme parabolique et la |
| 28 |
différenciation donne une forme carrée. La différenciation ne peut être |
| 29 |
montrée qu’à basse fréquence. Essayer cela pour d’autres formes de |
| 30 |
signaux, par exemple signal carré. Si on intègre un signal carré on est |
| 31 |
censé obtenir un signal triangulaire. |
| 32 |
|
| 33 |
.. image:: pics/RCintegration.png |
| 34 |
:width: 300px |
| 35 |
.. image:: pics/RCdifferentiation.png |
| 36 |
:width: 300px |