Debian Codegraph @

ja-JP/04_installation.po

raw
1 #
2 # AUTHOR <EMAIL@ADDRESS>, YEAR.
3 # Ryuunosuke Ayanokouzi <[email protected]>, 2015-2019.
4 # Kenshi Muto <[email protected]>, 2015.
5 # Yoichi Chonan <[email protected]>, 2015.
6 #
7 msgid ""
8 msgstr ""
9 "Project-Id-Version: 0\n"
10 "POT-Creation-Date: 2022-07-30 18:23+0200\n"
11 "PO-Revision-Date: 2019-02-03 09:00+0900\n"
12 "Last-Translator: AYANOKOUZI, Ryuunosuke <[email protected]>\n"
13 "Language-Team: Japanese <https://github.com/l/debian-handbook/tree/master/translation/ja_JP/push>\n"
14 "Language: ja\n"
15 "MIME-Version: 1.0\n"
16 "Content-Type: application/x-publican; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18
19 # Checked-By: Ryuunosuke Ayanokouzi;
20 msgid "Installation"
21 msgstr "インストール"
22
23 # Checked-By: Ryuunosuke Ayanokouzi;
24 msgid "Partitioning"
25 msgstr "パーティショニング"
26
27 # Checked-By: Ryuunosuke Ayanokouzi;
28 msgid "Formatting"
29 msgstr "フォーマット"
30
31 # Checked-By: Ryuunosuke Ayanokouzi;
32 msgid "File System"
33 msgstr "ファイルシステム"
34
35 # Checked-By: Ryuunosuke Ayanokouzi;
36 msgid "Boot Sector"
37 msgstr "ブートセクタ"
38
39 # Checked-By: Ryuunosuke Ayanokouzi;
40 msgid "Hardware Detection"
41 msgstr "ハードウェア検出"
42
43 # Checked-By: Ryuunosuke Ayanokouzi;
44 msgid "To use Debian, you need to install it on a computer; this task is taken care of by the <emphasis>debian-installer</emphasis> program. A proper installation involves many operations. This chapter reviews them in their chronological order."
45 msgstr "Debian を使うには、コンピュータにインストールする必要があります。そしてインストール作業を担当しているのが <emphasis>debian-installer</emphasis> プログラムです。適切なインストール作業は多くの手順からなります。この章ではそれぞれの手順を時系列順に概説します。"
46
47 # Checked-By: Ryuunosuke Ayanokouzi;
48 msgid "<primary>installation</primary><secondary>of the system</secondary>"
49 msgstr "<primary sortas=\"インストールサギョウ\">インストール作業</primary><secondary sortas=\"システムノインストールサギョウ\">システムのインストール作業</secondary>"
50
51 # Checked-By: Ryuunosuke Ayanokouzi;
52 msgid "<emphasis>BACK TO BASICS</emphasis> A catch-up course in the appendices"
53 msgstr "<emphasis>BACK TO BASICS</emphasis> 付録の補習講座"
54
55 # Checked-By: Ryuunosuke Ayanokouzi;
56 msgid "Installing a computer is always simpler when you are familiar with the way it works. If you are not, make a quick detour to <xref linkend=\"short-remedial-course\" /> before reading this chapter."
57 msgstr "コンピュータの仕組みをよく知っているなら、インストール作業は難しくありません。よく知らないなら、この章を読む前にちょっと遠回りして<xref linkend=\"short-remedial-course\" />を読んでください。"
58
59 # Checked-By: Ryuunosuke Ayanokouzi;
60 #, fuzzy
61 #| msgid "The installer for <emphasis role=\"distribution\">Stretch</emphasis> is based on <command>debian-installer</command>. Its modular design enables it to work in various scenarios and allows it to evolve and adapt to changes. Despite the limitations implied by the need to support a large number of architectures, this installer is very accessible to beginners, since it assists users at each stage of the process. Automatic hardware detection, guided partitioning, and graphical user interfaces have solved most of the problems that newbies used to face in the early years of Debian."
62 msgid "The installer for <emphasis role=\"distribution\">Bullseye</emphasis> is based on <command>debian-installer</command>. Its modular design enables it to work in various scenarios and allows it to evolve and adapt to changes. Despite the limitations implied by the need to support a large number of architectures, this installer is very accessible to beginners, since it assists users at each stage of the process. Automatic hardware detection, guided partitioning, and graphical user interfaces have solved most of the problems that novices used to face in the early years of Debian."
63 msgstr "<emphasis role=\"distribution\">Stretch</emphasis> 向けのインストーラは <command>debian-installer</command> を使っています。<command>debian-installer</command> の採用するモジュール式設計のおかげで、インストーラはさまざまな状況下で動作し、進化し、変化に適応することが可能です。数多くのアーキテクチャをサポートすることで生じる制限にも関わらず、インストールの各段階でユーザを補助することにより、インストーラは初心者にとても優しいものになっています。自動ハードウェア検出、ガイド付きのパーティショニング、グラフィカルユーザインターフェースのおかげで、初心者が Debian を使い始めた初期に直面するほとんどの問題は解決されています。"
64
65 # Checked-By: Ryuunosuke Ayanokouzi;
66 msgid "<primary>installer</primary>"
67 msgstr "<primary>インストーラ</primary>"
68
69 # Checked-By: Ryuunosuke Ayanokouzi;
70 msgid "<primary><command>debian-installer</command></primary>"
71 msgstr "<primary><command>debian-installer</command></primary>"
72
73 # Checked-By: Ryuunosuke Ayanokouzi;
74 #, fuzzy
75 #| msgid "Installation requires 128 MB of RAM (Random Access Memory) and at least 2 GB of hard drive space. All Falcot computers meet these criteria. Note, however, that these figures apply to the installation of a very limited system without a graphical desktop. A minimum of 512 MB of RAM and 10 GB of hard drive space are really recommended for a basic office desktop workstation."
76 msgid "Installation requires 256 MB of RAM (Random Access Memory) and at least 2 GB of hard drive space. All Falcot computers meet these criteria. Note, however, that these figures apply to the installation of a very limited system without a graphical desktop. A minimum of 2 GB of RAM and 10 GB of hard drive space are really recommended for a basic office desktop workstation."
77 msgstr "インストール作業を行うには 128 MB の RAM (ランダムアクセスメモリ) と最低 2 GB のハードドライブの空き領域が必要です。Falcot のすべてのコンピュータはこの基準を満足しています。しかし、これらの数字はグラフィカルデスクトップを含まない、極めて限定されたシステムをインストールする際の最低要件であるということに注意してください。一般的なオフィスデスクトップワークステーション用途では、最低でも 512 MB の RAM と 10 GB のハードドライブの空き領域が推奨されます。"
78
79 # Checked-By: Ryuunosuke Ayanokouzi;
80 #, fuzzy
81 #| msgid "<emphasis>BEWARE</emphasis> Upgrading from Jessie"
82 msgid "<emphasis>BEWARE</emphasis> Upgrading from Buster"
83 msgstr "<emphasis>BEWARE</emphasis> Jessie からのアップグレード"
84
85 # Checked-By: Ryuunosuke Ayanokouzi;
86 #, fuzzy
87 #| msgid "If you already have Debian Jessie installed on your computer, this chapter is not for you! Unlike other distributions, Debian allows updating a system from one version to the next without having to reinstall the system. Reinstalling, in addition to being unnecessary, could even be dangerous, since it could remove already installed programs."
88 msgid "If you already have Debian <emphasis role=\"distribution\">Bullseye</emphasis> installed on your computer, this chapter is not for you! Unlike other distributions, Debian allows updating a system from one version to the next without having to reinstall the system. Reinstalling, in addition to being unnecessary, could even be dangerous, since it could remove already installed programs."
89 msgstr "Debian Jessie が既にコンピュータ上にインストール済みなら、この章を読まなくても構いません! 他のディストリビューションと異なり、Debian はシステムを再インストールすることなく、あるバージョンから次のバージョンに更新することが可能です。再インストールは不必要というだけでなく、危険をはらんでいます。なぜなら、再インストールは既にインストール済みのプログラムを削除してしまうからです。"
90
91 # Checked-By: Ryuunosuke Ayanokouzi;
92 msgid "The upgrade process will be described in <xref linkend=\"sect.dist-upgrade\" />."
93 msgstr "Debian システムのアップグレード方法は<xref linkend=\"sect.dist-upgrade\" />で説明されています。"
94
95 msgid "Upgrading from even older Debian systems directly is not supported. In this case you need to update gradually to the stable release which followed your Debian version, and so on. Previous versions of this book will assist you in that matter."
96 msgstr ""
97
98 # Checked-By: Ryuunosuke Ayanokouzi;
99 msgid "Installation Methods"
100 msgstr "インストール方法"
101
102 # Checked-By: Ryuunosuke Ayanokouzi;
103 #, fuzzy
104 #| msgid "A Debian system can be installed from several types of media, as long as the BIOS of the machine allows it. You can for instance boot with a CD-ROM, a USB key, or even through a network."
105 msgid "A Debian system can be installed from several types of media, as long as the BIOS/UEFI (see <xref linkend=\"sidebar.bios-uefi\" />) of the machine allows it. You can for instance boot with a CD-ROM, a USB key, or even through a network."
106 msgstr "Debian システムは、マシンの BIOS が対応していれば、さまざまな種類のメディアからインストールできます。たとえば、CD-ROM、USB メモリ、さらにネットワーク経由からも起動できます。"
107
108 # Checked-By: Ryuunosuke Ayanokouzi;
109 msgid "Installing from a CD-ROM/DVD-ROM"
110 msgstr "CD-ROM/DVD-ROM からのインストール"
111
112 # Checked-By: Ryuunosuke Ayanokouzi;
113 #, fuzzy
114 #| msgid "<primary>installation</primary><secondary>of the system</secondary>"
115 msgid "<primary>installation</primary><secondary>from a CD-ROM/DVD-ROM</secondary>"
116 msgstr "<primary sortas=\"インストールサギョウ\">インストール作業</primary><secondary sortas=\"システムノインストールサギョウ\">システムのインストール作業</secondary>"
117
118 # Checked-By: Ryuunosuke Ayanokouzi;
119 msgid "The most widely used installation method is from a CD-ROM (or DVD-ROM, which behaves exactly the same way): the computer is booted from this media, and the installation program takes over."
120 msgstr "システムのインストール時に最も広く使われている方法が CD-ROM (DVD-ROM を使っても全く同じです) からインストールする方法です。具体的に言えば、コンピュータは CD-ROM や DVD-ROM から起動され、インストールプログラムが以降の作業を引き継ぎます。"
121
122 # Checked-By: Ryuunosuke Ayanokouzi;
123 #, fuzzy
124 #| msgid "<primary><filename>mini.iso</filename></primary>"
125 msgid "<primary><filename>netinst.iso</filename></primary>"
126 msgstr "<primary><filename>mini.iso</filename></primary>"
127
128 # Checked-By: Ryuunosuke Ayanokouzi;
129 #, fuzzy
130 #| msgid "<primary>installation</primary><secondary>of the system</secondary>"
131 msgid "<primary>installation</primary><secondary>netinst</secondary>"
132 msgstr "<primary sortas=\"インストールサギョウ\">インストール作業</primary><secondary sortas=\"システムノインストールサギョウ\">システムのインストール作業</secondary>"
133
134 # Checked-By: Ryuunosuke Ayanokouzi;
135 #, fuzzy
136 #| msgid "Various CD-ROM families have different purposes: <emphasis>netinst</emphasis> (network installation) contains the installer and the base Debian system; all other programs are then downloaded. Its “image”, that is the ISO-9660 filesystem that contains the exact contents of the disk, only takes up about 150 to 280 MB (depending on architecture). On the other hand, the complete set offers all packages and allows for installation on a computer that has no Internet access; it requires around 14 DVD-ROMs (or 3 Blu-ray disks). There is no more official CD-ROMs set as they were really huge, rarely used and now most of the computers use DVD-ROMs as well as CD-ROMs. But the programs are divided among the disks according to their popularity and importance; the first disk will be sufficient for most installations, since it contains the most used softwares."
137 msgid "Various CD-ROM families have different purposes: <emphasis>netinst</emphasis> (network installation) contains the installer and the base Debian system; all other programs are then downloaded. Its “image”, that is the ISO-9660 filesystem that contains the exact contents of the disk, only takes up about 150 to 280 MB (depending on the architecture). On the other hand, the complete set offers all packages and allows for installation on a computer that has no Internet access; it requires around 19 DVD-ROMs (or 4 Blu-ray disks). There is no more official CD-ROMs set as they were really huge, rarely used and now most of the computers use DVD-ROMs as well as CD-ROMs. But the programs are divided among the disks according to their popularity and importance; the first disk will be sufficient for most installations, since it contains the most used software."
138 msgstr "Debian はさまざまな種類の CD-ROM を用意しており、各 CD-ROM は別々の用途向けに設計されています。たとえば <emphasis>netinst</emphasis> (ネットワークインストール) にはインストーラと Debian 基本システムが含まれており、従ってそれ以外のプログラムはダウンロードされます。<emphasis>netinst</emphasis> の「イメージ」はディスクと完全に同じ内容の ISO-9660 ファイルシステムで、そのサイズは 150 から 280 MB 程度です (イメージのサイズはアーキテクチャに依存します)。一方で、完全版にはすべてのパッケージが含まれ、インターネットにアクセスできないコンピュータにシステムをインストールすることが可能です。完全版には 14 枚程度の DVD-ROM が必要です (Blu-ray ディスクの場合は 3 枚です)。公式の完全版 CD-ROM セットはありません (枚数が非常に多かったことがその理由です)。しかしながらプログラムは人気と重要度に基づいてディスクごとに分けられているため、最もよく使われているソフトウェアが含まれている 1 枚目のディスクがあれば、多くの場合に事足ります。"
139
140 # Checked-By: Ryuunosuke Ayanokouzi;
141 msgid "There is a last type of image, known as <filename>mini.iso</filename>, which is only available as a by-product of the installer. The image only contains the minimum required to configure the network and everything else is downloaded (including parts of the installer itself, which is why those images tend to break when a new version of the installer is released). Those images can be found on the normal Debian mirrors under the <filename>dists/<replaceable>release</replaceable>/main/installer-<replaceable>arch</replaceable>/current/images/netboot/</filename> directory."
142 msgstr "最後のイメージは <filename>mini.iso</filename> としても知られており、インストーラの副産物として入手できます。このイメージにはネットワークを設定するために必要な最小限の要素だけが含まれており、その他の要素はすべてダウンロードされます (インストーラの部品もダウンロードします。このため、インストーラの新バージョンがリリースされた時点でこのイメージは使えなくなります)。<filename>mini.iso</filename> のイメージは普通の Debian アーカイブミラーの <filename>dists/<replaceable>release</replaceable>/main/installer-<replaceable>arch</replaceable>/current/images/netboot/</filename> ディレクトリの下に配置されています。"
143
144 # Checked-By: Ryuunosuke Ayanokouzi;
145 msgid "<primary><filename>mini.iso</filename></primary>"
146 msgstr "<primary><filename>mini.iso</filename></primary>"
147
148 # Checked-By: Ryuunosuke Ayanokouzi;
149 msgid "<emphasis>TIP</emphasis> Multi-architecture disks"
150 msgstr "<emphasis>TIP</emphasis> マルチアーキテクチャディスク"
151
152 # Checked-By: Ryuunosuke Ayanokouzi;
153 msgid "Most installation CD- and DVD-ROMs work only with a specific hardware architecture. If you wish to download the complete images, you must take care to choose those which work on the hardware of the computer on which you wish to install them."
154 msgstr "多くのインストール CD-ROM や DVD-ROM は単一のハードウェアアーキテクチャ専用です。完全版をダウンロードする場合、システムをインストールしたいコンピュータのハードウェアで動作するインストーラが組み込まれている CD-ROM や DVD-ROM を選ばなければいけません。"
155
156 # Checked-By: Ryuunosuke Ayanokouzi;
157 msgid "Some CD/DVD-ROM images can work on several architectures. We thus have a CD-ROM image combining the <emphasis>netinst</emphasis> images of the <emphasis>i386</emphasis> and <emphasis>amd64</emphasis> architectures."
158 msgstr "一部の CD/DVD-ROM イメージは複数のアーキテクチャで動作します。このため、<emphasis>i386</emphasis> と <emphasis>amd64</emphasis> アーキテクチャの <emphasis>netinst</emphasis> イメージを含む CD-ROM イメージが用意されています。"
159
160 # Checked-By: Ryuunosuke Ayanokouzi;
161 msgid "<primary>CD-ROM</primary><secondary>installation CD-ROM</secondary>"
162 msgstr "<primary>CD-ROM</primary><secondary sortas=\"インストールヨウ CD-ROM\">インストール用 CD-ROM</secondary>"
163
164 # Checked-By: Ryuunosuke Ayanokouzi;
165 msgid "<primary>CD-ROM</primary><secondary><emphasis>netinst CD-ROM</emphasis></secondary>"
166 msgstr "<primary>CD-ROM</primary><secondary><emphasis>netinst CD-ROM</emphasis></secondary>"
167
168 # Checked-By: Ryuunosuke Ayanokouzi;
169 msgid "<primary>DVD-ROM</primary><secondary>installation DVD-ROM</secondary>"
170 msgstr "<primary>DVD-ROM</primary><secondary sortas=\"インストールヨウ DVD-ROM\">インストール用 DVD-ROM</secondary>"
171
172 # Checked-By: Ryuunosuke Ayanokouzi;
173 msgid "<primary>DVD-ROM</primary><secondary><emphasis>netinst DVD-ROM</emphasis></secondary>"
174 msgstr "<primary>DVD-ROM</primary><secondary><emphasis>netinst DVD-ROM</emphasis></secondary>"
175
176 # Checked-By: Ryuunosuke Ayanokouzi;
177 #, fuzzy
178 #| msgid "To acquire Debian CD-ROM images, you may of course download them and burn them to disk. You may also purchase them, and, thus, provide the project with a little financial support. Check the website to see the list of DVD-ROM image vendors and download sites. <ulink type=\"block\" url=\"http://www.debian.org/CD/index.html\" />"
179 msgid "To acquire Debian CD-ROM images, you may, of course, download them and burn them to disk. You may also purchase them, and, thus, provide the project with a little financial support. Check the website to see the list of DVD-ROM image vendors and download sites. <ulink type=\"block\" url=\"https://www.debian.org/CD/\" />"
180 msgstr "Debian のインストール用 CD-ROM を作るためには、CD-ROM イメージをダウンロードして、ディスクに書き込む必要があります。Debian インストール用 CD-ROM は購入することも可能で、これはプロジェクトに対する幾ばくかの資金援助になります。DVD-ROM イメージ業者とダウンロード場所のリストがウェブサイトで公開されています。<ulink type=\"block\" url=\"http://www.debian.org/CD/index.html\" />"
181
182 # Checked-By: Ryuunosuke Ayanokouzi;
183 msgid "Booting from a USB Key"
184 msgstr "USB メモリからの起動"
185
186 # Checked-By: Ryuunosuke Ayanokouzi;
187 msgid "<primary>USB key</primary>"
188 msgstr "<primary>USB メモリ</primary>"
189
190 # Checked-By: Ryuunosuke Ayanokouzi;
191 #, fuzzy
192 #| msgid "<primary>installation</primary><secondary>of the system</secondary>"
193 msgid "<primary>installation</primary><secondary>from a USB key</secondary>"
194 msgstr "<primary sortas=\"インストールサギョウ\">インストール作業</primary><secondary sortas=\"システムノインストールサギョウ\">システムのインストール作業</secondary>"
195
196 # Checked-By: Ryuunosuke Ayanokouzi;
197 msgid "Since most computers are able to boot from USB devices, you can also install Debian from a USB key (this is nothing more than a small flash-memory disk)."
198 msgstr "多くのコンピュータは USB デバイスから起動できるため、USB メモリ (これは単なるフラッシュメモリディスクに過ぎません) から Debian をインストールすることも可能です。"
199
200 # Checked-By: Ryuunosuke Ayanokouzi;
201 msgid "The installation manual explains how to create a USB key that contains the <command>debian-installer</command>. The procedure is very simple because ISO images for i386 and amd64 are hybrid images that can boot from a CD-ROM as well as from a USB key."
202 msgstr "インストールマニュアルでは <command>debian-installer</command> を含む USB メモリを作成する方法が説明されています。USB メモリの作成手順は極めて単純です。なぜなら、i386 と amd64 アーキテクチャ用の ISO イメージは CD-ROM からだけでなく USB メモリからも起動できるハイブリッドイメージになっているからです。"
203
204 # Checked-By: Ryuunosuke Ayanokouzi;
205 #, fuzzy
206 #| msgid "You must first identify the device name of the USB key (ex: <literal>/dev/sdb</literal>); the simplest means to do this is to check the messages issued by the kernel using the <command>dmesg</command> command. Then you must copy the previously downloaded ISO image (for example debian-9.0.0-amd64-netinst.iso) with the command <command>cat debian-9.0.0-amd64-netinst.iso &gt;/dev/sdb; sync</command>. This command requires administrator rights, since it accesses the USB key directly and blindly erases its content."
207 msgid "You must first identify the device name of the USB key (ex: <literal>/dev/sdb</literal>); the simplest means to do this is to check the messages issued by the kernel using the <command>dmesg</command> command. Then you must copy the previously downloaded ISO image (for example, debian-11.0.0-amd64-netinst.iso) with the command <command>cat debian-11.0.0-amd64-netinst.iso &gt;/dev/sdb; sync</command>. This command requires administrator rights, since it accesses the USB key directly and blindly erases its content."
208 msgstr "最初に USB メモリのデバイス名を確認しなければいけません (たとえば <literal>/dev/sdb</literal> です)。これを行う最も簡単な方法が <command>dmesg</command> コマンドを使ってカーネルの出したメッセージを確認する方法です。次に前もってダウンロードしておいた ISO イメージ (たとえば debian-9.0.0-amd64-netinst.iso) を <command>cat debian-9.0.0-amd64-netinst.iso &gt;/dev/sdb; sync</command> というコマンドを実行してコピーしなければいけません。このコマンドは USB メモリに直接アクセスし、無差別に内容を削除するため、実行には管理者権限が必要です。"
209
210 # Checked-By: Ryuunosuke Ayanokouzi;
211 #, fuzzy
212 #| msgid "A more detailed explanation is available in the installation manual. Among other things, it describes an alternative method of preparing a USB key that is more complex, but that allows to customize the installer's default options (those set in the kernel command line). <ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch04s03.html\" />"
213 msgid "A more detailed explanation is available in the installation manual. Among other things, it describes an alternative method of preparing a USB key that is more complex, but that allows you to customize the installer's default options (those set in the kernel command line). <ulink type=\"block\" url=\"https://www.debian.org/releases/stable/amd64/ch04s03\" />"
214 msgstr "より詳しい説明はインストールマニュアルに書いてあります。インストールマニュアルの中で特に注目すべき箇所は、より複雑な手順で USB メモリを準備する方法です。この方法を使うことで、インストーラのデフォルトオプションを (カーネルコマンドラインを使い) カスタマイズすることが可能です。<ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch04s03.html\" />"
215
216 # Checked-By: Ryuunosuke Ayanokouzi;
217 msgid "Installing through Network Booting"
218 msgstr "ネットワークブート経由のインストール"
219
220 # Checked-By: Ryuunosuke Ayanokouzi;
221 msgid "<primary>installation</primary><secondary><emphasis>netboot installation</emphasis></secondary>"
222 msgstr "<primary>インストール</primary><secondary><emphasis>netboot インストール</emphasis></secondary>"
223
224 # Checked-By: Ryuunosuke Ayanokouzi;
225 msgid "<primary>installation</primary><secondary><emphasis>PXE installation</emphasis></secondary>"
226 msgstr "<primary>インストール</primary><secondary><emphasis>PXE インストール</emphasis></secondary>"
227
228 # Checked-By: Ryuunosuke Ayanokouzi;
229 msgid "<primary>installation</primary><secondary><emphasis>TFTP installation</emphasis></secondary>"
230 msgstr "<primary>インストール</primary><secondary><emphasis>TFTP インストール</emphasis></secondary>"
231
232 # Checked-By: Ryuunosuke Ayanokouzi;
233 #, fuzzy
234 #| msgid "<primary>PAE</primary>"
235 msgid "<primary>PXE</primary>"
236 msgstr "<primary>PAE</primary>"
237
238 msgid "<primary>TFTP</primary><seealso>Trivial File Transfer Protocol</seealso>"
239 msgstr ""
240
241 # Checked-By: Ryuunosuke Ayanokouzi;
242 #, fuzzy
243 #| msgid "<primary>resize a partition</primary>"
244 msgid "<primary>Trivial File Transfer Protocol</primary>"
245 msgstr "<primary>パーティション</primary><secondary sortas=\"サイズヘンコウ\">サイズ変更</secondary>"
246
247 # Checked-By: Ryuunosuke Ayanokouzi;
248 msgid "Many BIOSes allow booting directly from the network by downloading a kernel and a minimal filesystem image. This method (which has several names, such as <acronym>PXE</acronym> or <acronym>TFTP</acronym> boot) can be a life-saver if the computer does not have a CD-ROM reader, or if the BIOS can't boot from such media."
249 msgstr "多くの BIOS では、カーネルと最低限のファイルシステムイメージをダウンロードすることでネットワークからカーネルを直接起動できるようになっています。<acronym>PXE</acronym> や <acronym>TFTP</acronym> ブートなどと呼ばれるこの方法は CD-ROM ドライブを持たないコンピュータやメディアからの起動をサポートしていない BIOS を備えたコンピュータにインストールを行う場合の救世主になります。"
250
251 # Checked-By: Ryuunosuke Ayanokouzi;
252 msgid "This installation method works in two steps. First, while booting the computer, the BIOS (or the network card) issues a BOOTP/DHCP request to automatically acquire an IP address. When a BOOTP or DHCP server returns a response, it includes a filename, as well as network settings. After having configured the network, the client computer then issues a TFTP (Trivial File Transfer Protocol) request for a file whose name was previously indicated. Once this file is acquired, it is executed as though it were a bootloader. This then launches the Debian installation program, which is executed as though it were running from the hard drive, a CD-ROM, or a USB key."
253 msgstr "ネットワークブート経由のインストール方法は 2 段階で行われます。最初に、コンピュータ起動中に BIOS (またはネットワークカード) が自動的に IP アドレスを取得するために BOOTP/DHCP 要求を出します。BOOTP または DHCP サーバがこれに応答し、ファイル名とネットワーク設定を返します。ネットワークの設定が終了した後、クライアントコンピュータは先に返されたファイル名のファイルを取得するために TFTP (Trivial File Transfer Protocol) 要求を出します。ファイルの取得が終わったら、ファイルをあたかもブートローダであるかのごとく実行します。そしてブートローダが Debian インストールプログラムを起動し、インストーラがハードドライブ、CD-ROM、USB メモリから起動したのと同様に実行されます。"
254
255 # Checked-By: Ryuunosuke Ayanokouzi;
256 #, fuzzy
257 #| msgid "All the details of this method are available in the installation guide (“Preparing files for TFTP Net Booting” section). <ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch05s01.html#boot-tftp\" /> <ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch04s05.html\" />"
258 msgid "All the details of this method are available in the installation guide (“Preparing files for TFTP Net Booting” section). <ulink type=\"block\" url=\"https://www.debian.org/releases/stable/amd64/ch05s01#boot-tftp-x86\" /> <ulink type=\"block\" url=\"https://www.debian.org/releases/stable/amd64/ch04s05\" />"
259 msgstr "ネットブート経由のインストール方法に関するすべての詳しい情報はインストールガイド (「TFTP ネットブート用ファイルの準備」の節) に書かれています。<ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch05s01.html#boot-tftp\" /><ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch04s05.html\" />"
260
261 # Checked-By: Ryuunosuke Ayanokouzi;
262 msgid "Other Installation Methods"
263 msgstr "その他のインストール方法"
264
265 # Checked-By: Ryuunosuke Ayanokouzi;
266 #, fuzzy
267 #| msgid "<primary>installation</primary><secondary><emphasis>netboot installation</emphasis></secondary>"
268 msgid "<primary>installation</primary><secondary>custom installation</secondary>"
269 msgstr "<primary>インストール</primary><secondary><emphasis>netboot インストール</emphasis></secondary>"
270
271 # Checked-By: Ryuunosuke Ayanokouzi;
272 msgid "When we have to deploy customized installations for a large number of computers, we generally choose an automated rather than a manual installation method. Depending on the situation and the complexity of the installations to be made, we can use FAI (Fully Automatic Installer, described in <xref linkend=\"sect.fai\" />), or even a customized installation DVD with preseeding (see <xref linkend=\"sect.d-i-preseeding\" />)."
273 msgstr "Debian を多数のコンピュータに特別な設定でインストールしなければいけない場合、手作業ではなく自動でインストールを行うことが多いです。インストールの状況と複雑度合いに依存しますが、FAI (Fully Automatic Installer、<xref linkend=\"sect.fai\" />で説明されています) を使うか、preseed ファイルを使ってカスタマイズされたインストール DVD (<xref linkend=\"sect.d-i-preseeding\" />を参照してください) を使えば、自動でインストールを行うことが可能です。"
274
275 # Checked-By: Ryuunosuke Ayanokouzi;
276 #, fuzzy
277 #| msgid "<primary>installation</primary><secondary>of the system</secondary>"
278 msgid "<primary>installation</primary><secondary>remote installation</secondary>"
279 msgstr "<primary sortas=\"インストールサギョウ\">インストール作業</primary><secondary sortas=\"システムノインストールサギョウ\">システムのインストール作業</secondary>"
280
281 msgid "It should also be noted that the installer can load and run an SSH server and thus provides the ability to install Debian remotely via an SSH session. The release notes also describe how to run the installer from an existing system using <emphasis>grub</emphasis> to replace it completely."
282 msgstr ""
283
284 # Checked-By: Ryuunosuke Ayanokouzi;
285 msgid "Installing, Step by Step"
286 msgstr "インストール作業の各段階"
287
288 # Checked-By: Ryuunosuke Ayanokouzi;
289 msgid "Booting and Starting the Installer"
290 msgstr "起動とインストーラの開始"
291
292 # Checked-By: Ryuunosuke Ayanokouzi;
293 msgid "Once the BIOS has begun booting from the CD- or DVD-ROM, the Isolinux bootloader menu appears. At this stage, the Linux kernel is not yet loaded; this menu allows you to choose the kernel to boot and enter possible parameters to be transferred to it in the process."
294 msgstr "BIOS が CD-ROM や DVD-ROM からの起動を開始したら、Isolinux ブートローダメニューが表示されます。この段階では Linux カーネルはまだ読み込まれていません。従ってこのメニューでは、起動させるカーネルを選択し、起動処理中にカーネルに渡すことが可能なパラメータを入力できます。"
295
296 # Checked-By: Ryuunosuke Ayanokouzi;
297 #, fuzzy
298 #| msgid "For a standard installation, you only need to choose “Install” or “Graphical install” (with the arrow keys), then press the <keycap>Enter</keycap> key to initiate the remainder of the installation process. If the DVD-ROM is a “Multi-arch” disk, and the machine has an Intel or AMD 64 bit processor, those menu options enable the installation of the 64 bit variant (<emphasis>amd64</emphasis>) and the installation of the 32 bit variant remains available in a dedicated sub-menu (“32-bit install options”). If you have a 32 bit processor, you don't get a choice and the menu entries install the 32 bit variant (<emphasis>i386</emphasis>)."
299 msgid "For a standard installation, you only need to choose “Install” or “Graphical install” (with the arrow keys), then press the <keycap>Enter</keycap> key to initiate the remainder of the installation process. If the DVD-ROM is a “Multi-arch” disk, and the machine has an Intel or AMD 64-bit processor, those menu options enable the installation of the 64-bit variant (<emphasis>amd64</emphasis>) and the installation of the 32-bit variant remains available in a dedicated sub-menu (“32-bit install options”). If you have a 32-bit processor, you don't get a choice and the menu entries install the 32-bit variant (<emphasis>i386</emphasis>)."
300 msgstr "標準的なインストールを実行したい場合、矢印キーで「Install」もしくは「Graphical install」を選び、<keycap>Enter</keycap> を押して残りのインストール作業を開始します。DVD-ROM が「マルチアーキテクチャ」ディスクであり、マシンが Intel または AMD の 64 ビットプロセッサを搭載している場合、「Install」もしくは「Graphical install」を選択することで 64 ビット版 (<emphasis>amd64</emphasis>) がインストールされます。ここで 32 ビット版をインストールするには専用のサブメニュー (「32-bit install options」) を選択してください。また、マシンが 32 ビットプロセッサを搭載している場合、「Install」もしくは「Graphical install」を選択することで 32 ビット版 (<emphasis>i386</emphasis>) がインストールされます。64 ビット版をインストールすることはできないので、メニューには 64 ビット版をインストールするメニューエントリは存在しません。"
301
302 # Checked-By: Ryuunosuke Ayanokouzi;
303 msgid "<emphasis>GOING FURTHER</emphasis> 32 or 64 bits?"
304 msgstr "<emphasis>GOING FURTHER</emphasis> 32 ビットか 64 ビットか?"
305
306 # Checked-By: Ryuunosuke Ayanokouzi;
307 #, fuzzy
308 #| msgid "<primary>Physical Address Extension</primary>"
309 msgid "<primary>PAE</primary><seealso>Physical Address Extension</seealso>"
310 msgstr "<primary sortas=\"ブツリアドレスカクチョウ\">物理アドレス拡張</primary>"
311
312 # Checked-By: Ryuunosuke Ayanokouzi;
313 msgid "<primary>Physical Address Extension</primary>"
314 msgstr "<primary sortas=\"ブツリアドレスカクチョウ\">物理アドレス拡張</primary>"
315
316 # Checked-By: Ryuunosuke Ayanokouzi;
317 msgid "<primary>32/64 bits, choice</primary>"
318 msgstr "<primary sortas=\"32/64 ビットノセンタク\">32/64 ビットの選択</primary>"
319
320 # Checked-By: Ryuunosuke Ayanokouzi;
321 #, fuzzy
322 #| msgid "The fundamental difference between 32 and 64 bit systems is the size of memory addresses. In theory, a 32 bit system can not work with more than 4 GB of RAM (2<superscript>32</superscript> bytes). In practice, it is possible to work around this limitation by using the <literal>686-pae</literal> kernel variant, so long as the processor handles the PAE (Physical Address Extension) functionality. Using it does have a notable influence on system performance, however. This is why it is useful to use the 64 bit mode on a server with a large amount of RAM."
323 msgid "The fundamental difference between 32- and 64-bit systems is the size of memory addresses. In theory, a 32-bit system cannot work with more than 4 GB of RAM (2<superscript>32</superscript> bytes). In practice, it is possible to work around this limitation by using the <literal>686-pae</literal> kernel variant, so long as the processor handles the PAE (Physical Address Extension) functionality. Using it does have a notable influence on system performance, however. This is why it is useful to use the 64-bit mode on a server with a large amount of RAM."
324 msgstr "32 ビットシステムと 64 ビットシステムの本質的な差異はメモリアドレスのサイズにあります。理論的には、32 ビットシステムでは 4 GB (2<superscript>32</superscript> バイト) 以上の RAM を取り扱うことができません。現実的には、PAE (物理アドレス拡張) 機能を扱えるプロセッサを備えたマシンで <literal>686-pae</literal> カーネル版を使うことでこの制限を回避することが可能です。しかし、PAE を使うとシステムの性能に深刻な影響をおよぼします。そのため、大容量の RAM を載せたサーバでは 64 ビットモードを使うほうが有益です。"
325
326 # Checked-By: Ryuunosuke Ayanokouzi;
327 #, fuzzy
328 #| msgid "For an office computer (where a few percent difference in performance is negligible), you must keep in mind that some proprietary programs are not available in 64 bit versions (such as Skype, for example). It is technically possible to make them work on 64 bit systems, but you have to install the 32 bit versions of all the necessary libraries (see <xref linkend=\"sect.multi-arch\" />), and sometimes to use <command>setarch</command> or <command>linux32</command> (in the <emphasis role=\"pkg\">util-linux</emphasis> package) to trick applications regarding the nature of the system. <indexterm><primary><command>setarch</command></primary></indexterm> <indexterm><primary><command>linux32</command></primary></indexterm>"
329 msgid "For an office computer (where a few percent difference in performance is negligible), you must keep in mind that some proprietary programs are not available in 64-bit versions. It is technically possible to make them work on 64-bit systems, but you have to install the 32-bit versions of all the necessary libraries (see <xref linkend=\"sect.multi-arch\" />), and sometimes to use <command>setarch</command> or <command>linux32</command> (in the <emphasis role=\"pkg\">util-linux</emphasis> package) to trick applications regarding the nature of the system."
330 msgstr "オフィスコンピュータ (数パーセントの性能の違いを無視しても構わない場合) について言えば、一部のプロプライエタリプログラム (たとえば Skype) は 64 ビット版を提供していない場合があることを覚えておいてください。技術的に言えば、これらのプログラムを 64 ビットシステムで動かすことは可能です。しかし、すべての必要なライブラリの 32 ビット版をインストールしなければいけませんし (<xref linkend=\"sect.multi-arch\" />を参照してください)、<command>setarch</command> または <command>linux32</command> コマンド (<emphasis role=\"pkg\">util-linux</emphasis> パッケージに含まれます) を使ってシステム環境に関してアプリケーションを騙さなければいけない場合があります。<indexterm><primary><command>setarch</command></primary></indexterm><indexterm><primary><command>linux32</command></primary></indexterm>"
331
332 # Checked-By: Ryuunosuke Ayanokouzi;
333 #, fuzzy
334 #| msgid "<primary><command>dselect</command></primary>"
335 msgid "<primary><command>setarch</command></primary>"
336 msgstr "<primary><command>dselect</command></primary>"
337
338 # Checked-By: Ryuunosuke Ayanokouzi;
339 #, fuzzy
340 #| msgid "<primary><command>dselect</command></primary>"
341 msgid "<primary><command>linux32</command></primary>"
342 msgstr "<primary><command>dselect</command></primary>"
343
344 # Checked-By: Ryuunosuke Ayanokouzi;
345 msgid "<emphasis>IN PRACTICE</emphasis> Installation alongside an existing Windows system"
346 msgstr "<emphasis>IN PRACTICE</emphasis> Debian を既存の Windows システムと共存させる"
347
348 # Checked-By: Ryuunosuke Ayanokouzi;
349 msgid "<primary>dual boot</primary>"
350 msgstr "<primary>デュアルブート</primary>"
351
352 # Checked-By: Ryuunosuke Ayanokouzi;
353 msgid "If the computer is already running Windows, it is not necessary to delete the system in order to install Debian. You can have both systems at once, each installed on a separate disk or partition, and choose which to start when booting the computer. This configuration is often called “dual boot”, and the Debian installation system can set it up. This is done during the hard drive partitioning stage of installation and while setting up the bootloader (see the sidebars <xref linkend=\"sidebar.shrinking-partition\" /> and <xref linkend=\"sidebar.bootloader-dual-boot\" />)."
354 msgstr "コンピュータで既に Windows が動いている場合、Debian をインストールするのに Windows システムを削除する必要はありません。Windows と Debian を別のディスクまたはパーティションにインストールすれば、Windows と Debian のシステムを同時に備え持つことが可能で、コンピュータの起動時に起動するシステムを選択することが可能です。この構成は「デュアルブート」と呼ばれており、Debian のインストールシステムは「デュアルブート」構成を設定できます。設定はインストール中のハードドライブのパーティショニング段階およびブートローダの設定段階で行います (補注<xref linkend=\"sidebar.shrinking-partition\" />および<xref linkend=\"sidebar.bootloader-dual-boot\" />を参照してください)。"
355
356 # Checked-By: Ryuunosuke Ayanokouzi;
357 #, fuzzy
358 #| msgid "If you already have a working Windows system, you can even avoid using a CD-ROM; Debian offers a Windows program that will download a light Debian installer and set it up on the hard disk. You then only need to reboot the computer and choose between normal Windows boot or booting the installation program. You can also find it on a dedicated website with a rather explicit name… <ulink type=\"block\" url=\"http://ftp.debian.org/debian/tools/win32-loader/stable/\" /> <ulink type=\"block\" url=\"http://www.goodbye-microsoft.com/\" />"
359 msgid "If you already have a working Windows system, you can even avoid using a CD-ROM; Debian offers a Windows program that will download a light Debian installer and set it up on the hard disk. You then only need to reboot the computer and choose between normal Windows boot or booting the installation program. You can also find it on a dedicated website with a rather explicit title… <ulink type=\"block\" url=\"https://deb.debian.org/debian/tools/win32-loader/stable/\" /> <ulink type=\"block\" url=\"https://people.debian.org/~rmh/goodbye-microsoft/\" />"
360 msgstr "既に稼働中の Windows システムがある場合、CD-ROM を使わずとも Debian をインストールできます。Debian は軽量の Debian インストーラをダウンロードして、ハードディスクに Debian をセットアップするための Windows プログラムを提供しています。コンピュータを再起動し、Windows を通常起動するかインストールプログラムを起動するかを選択するだけです。また、このプログラムはかなり露骨な名前の専用ウェブサイトで配布されています…。<ulink type=\"block\" url=\"http://ftp.debian.org/debian/tools/win32-loader/stable/\" /><ulink type=\"block\" url=\"http://www.goodbye-microsoft.com/\" />"
361
362 # Checked-By: Ryuunosuke Ayanokouzi;
363 msgid "<emphasis>BACK TO BASICS</emphasis> Bootloader"
364 msgstr "<emphasis>BACK TO BASICS</emphasis> ブートローダ"
365
366 # Checked-By: Ryuunosuke Ayanokouzi;
367 msgid "<primary>loader</primary><secondary>bootloader</secondary>"
368 msgstr "<primary>ローダ</primary><secondary>ブートローダ</secondary>"
369
370 # Checked-By: Ryuunosuke Ayanokouzi;
371 msgid "<primary>bootloader</primary>"
372 msgstr "<primary>ブートローダ</primary>"
373
374 # Checked-By: Ryuunosuke Ayanokouzi;
375 #, fuzzy
376 #| msgid "The bootloader is a low-level program that is responsible for booting the Linux kernel just after the BIOS passes off its control. To handle this task, it must be able to locate the Linux kernel to boot on the disk. On the i386 and amd64 architectures, the two most used programs to perform this task are LILO, the older of the two, and GRUB, its modern replacement. Isolinux and Syslinux are alternatives frequently used to boot from removable media."
377 msgid "The bootloader is a low-level program that is responsible for booting the Linux kernel just after the BIOS passes off its control. To handle this task, it must be able to locate the Linux kernel to boot on the disk. On the i386 and amd64 architectures, the two most used programs to perform this task are <acronym>LILO</acronym>, the older of the two, and <acronym>GRUB</acronym>, its modern replacement. Isolinux and Syslinux are alternatives frequently used to boot from removable media."
378 msgstr "ブートローダとは BIOS から操作を受け取った直後に Linux カーネルを起動させる低レベルプログラムです。この作業を行うために、ブートローダは起動したい Linux カーネルの格納場所を探すことができなければいけません。i386 と amd64 アーキテクチャでブートローダとして最も利用されているプログラムは比較的古参の LILO とその現代的な代替である GRUB です。Isolinux と Syslinux はリムーバブルメディアから起動する際によく使われる代替プログラムです。"
379
380 # Checked-By: Ryuunosuke Ayanokouzi;
381 msgid "Each menu entry hides a specific boot command line, which can be configured as needed by pressing the <keycap>TAB</keycap> key before validating the entry and booting. The “Help” menu entry displays the old command line interface, where the <keycap>F1</keycap> to <keycap>F10</keycap> keys display different help screens detailing the various options available at the prompt. You will rarely need to use this option except in very specific cases."
382 msgstr "各メニューエントリはそれを選択して <keycap>Enter</keycap> を押した後に実行されるコマンドに対応しています。必要に応じて実行されるコマンドを編集するには、エントリを選択した後 <keycap>Enter</keycap> を押す前に <keycap>TAB</keycap> キーを押します。「Help」メニューエントリは古いコマンドラインインターフェースを表示します。このインターフェースでは、<keycap>F1</keycap> から <keycap>F10</keycap> までのキーを使って、プロンプトから利用できるさまざまなオプションについての詳細が書かれた別のヘルプ画面が表示されます。極めて特殊な場合を除いて、「Help」メニューエントリを参照する必要はないでしょう。"
383
384 # Checked-By: Ryuunosuke Ayanokouzi;
385 msgid "The “expert” mode (accessible in the “Advanced options” menu) details all possible options in the process of installation, and allows navigation between the various steps without them happening automatically in sequence. Be careful, this very verbose mode can be confusing due to the multitude of configuration choices that it offers."
386 msgstr "「expert」モード (「Advanced options」メニューの中にあります) を使うことで、インストール中に利用できるすべてのオプションを詳細に設定したり、各インストールステップを自動的に次々と進むのではなく毎回ナビゲーションを表示するようにできます。「expert」モードはとても詳細なモードで、設定できる選択肢が数多く表示されすぎてわかりにくいかもしれませんので、ご注意ください。"
387
388 msgid "The \"rescue\" mode, also accessible in the “Advanced options” menu, allows to recover a broken system or fix the bootloader. After presenting the first few screens of the installer, it will allow to enter a shell prompt in the file system you selected to perform any necessary actions, or allow to re-install the bootloader. <ulink type=\"block\" url=\"https://www.debian.org/releases/stable/amd64/ch08s06.en.html\" />"
389 msgstr ""
390
391 # Checked-By: Ryuunosuke Ayanokouzi;
392 msgid "Boot screen"
393 msgstr "起動画面"
394
395 # Checked-By: Ryuunosuke Ayanokouzi;
396 #, fuzzy
397 #| msgid "Once booted, the installation program guides you step by step throughout the process. This section presents each of these steps in detail. Here we follow the process of an installation from an amd64 DVD-ROM (more specifically, the rc3 version of the installer for Stretch); <emphasis>netinst</emphasis> installations, as well as the final release of the installer, may look slightly different. We will also address installation in graphical mode, but the only difference from “classic” (text-mode) installation is in the visual appearance."
398 msgid "Once booted, the installation program guides you step by step throughout the process. This section presents each of these steps in detail. Here we follow the process of an installation from an amd64 DVD-ROM (more specifically, the RC3 version of the installer for <emphasis role=\"distribution\">Bullseye</emphasis>); <emphasis>netinst</emphasis> installations, as well as the final release of the installer, may look slightly different. We will also address installation in graphical mode, but the only difference from “classic” (text-mode) installation is in the visual appearance."
399 msgstr "ひとたび起動すれば、インストールプログラムがインストールの最初から最後まですべての手順を誘導します。この節ではそれぞれの手順を詳細に解説しています。ここでは amd64 DVD-ROM (より詳しく言えば Stretch インストーラの RC 3) を使ったインストールを順に見ていきます。<emphasis>netinst</emphasis> を使ったインストールおよびインストーラの完成版では、少し様子が違うかもしれません。グラフィカルモードのインストールの様子も載せていますが、「クラッシック」(テキストモード) インストールとの違いは見た目だけです。"
400
401 # Checked-By: Ryuunosuke Ayanokouzi;
402 msgid "Selecting the language"
403 msgstr "言語の選択"
404
405 # Checked-By: Ryuunosuke Ayanokouzi;
406 msgid "<primary>choice</primary><secondary>of language</secondary>"
407 msgstr "<primary sortas=\"センタク\">選択</primary><secondary sortas=\"ゲンゴノセンタク\">言語の選択</secondary>"
408
409 # Checked-By: Ryuunosuke Ayanokouzi;
410 msgid "The installation program begins in English, but the first step allows the user to choose the language that will be used in the rest of the process. Choosing French, for example, will provide an installation entirely translated into French (and a system configured in French as a result). This choice is also used to define more relevant default choices in subsequent stages (notably the keyboard layout)."
411 msgstr "起動直後のインストールプログラムでは英語が使われていますが、最初にこれ以降のインストール作業の表示言語として使われる言語を選択します。たとえば、日本語を選択したらインストール中の表示言語はすべて日本語になります (そしてシステムも日本語に設定されます)。さらに、以降のインストール作業のデフォルト選択肢 (特にキーボードレイアウトのデフォルト選択肢) がより適切なものになります。"
412
413 # Checked-By: Ryuunosuke Ayanokouzi;
414 msgid "<emphasis>BACK TO BASICS</emphasis> Navigating with the keyboard"
415 msgstr "<emphasis>BACK TO BASICS</emphasis> キーボード操作"
416
417 # Checked-By: Ryuunosuke Ayanokouzi;
418 #, fuzzy
419 #| msgid "Some steps in the installation process require you to enter information. These screens have several areas that may “have focus” (text entry area, checkboxes, list of choices, OK and Cancel buttons), and the <keycap>TAB</keycap> key allows you to move from one to another."
420 msgid "Some steps in the installation process require you to enter information. These screens have several areas that may “have focus” (text entry area, checkboxes, list of choices, <guibutton>OK</guibutton> and <guibutton>Cancel</guibutton> buttons), and the <keycap>TAB</keycap> key allows you to move from one to another."
421 msgstr "インストール作業のいくつかの段階では情報の入力が求められます。それらの画面にはさまざまな入力場所 (テキストエリア、チェックボックス、選択リスト、OK ボタンやキャンセルボタン) があり、入力場所は「フォーカスされている」かもしれません。それぞれの入力場所からフォーカスを移動させるには、<keycap>TAB</keycap> キーを使ってください。"
422
423 # Checked-By: Ryuunosuke Ayanokouzi;
424 msgid "In graphical mode, you can use the mouse as you would normally on an installed graphical desktop."
425 msgstr "グラフィカルモードでは、いつもグラフィカルデスクトップでやっているのと同じやり方でマウスを使ってください。"
426
427 # Checked-By: Ryuunosuke Ayanokouzi;
428 msgid "Selecting the country"
429 msgstr "国の選択"
430
431 # Checked-By: Ryuunosuke Ayanokouzi;
432 msgid "<primary>choice</primary><secondary>of country</secondary>"
433 msgstr "<primary sortas=\"センタク\">選択</primary><secondary sortas=\"クニノセンタク\">国の選択</secondary>"
434
435 # Checked-By: Ryuunosuke Ayanokouzi;
436 msgid "The second step consists in choosing your country. Combined with the language, this information enables the program to offer the most appropriate keyboard layout. This will also influence the configuration of the time zone. In the United States, a standard QWERTY keyboard is suggested, and a choice of appropriate time zones is offered."
437 msgstr "2 段階目に国を選択します。インストーラは、先に選択した言語と国の情報を組み合わせて、最も適切と思われるキーボードレイアウトを提案します。さらに、国情報はタイムゾーンの設定にも影響をおよぼします。ここで日本を選択した場合、日本で標準的な QWERTY キーボードが提案され、適切なタイムゾーンが提供されます。"
438
439 # Checked-By: Ryuunosuke Ayanokouzi;
440 msgid "Selecting the keyboard layout"
441 msgstr "キーボードレイアウトの選択"
442
443 # Checked-By: Ryuunosuke Ayanokouzi;
444 msgid "<primary>keyboard layout</primary>"
445 msgstr "<primary>キーボードレイアウト</primary>"
446
447 # Checked-By: Ryuunosuke Ayanokouzi;
448 msgid "<primary>layout, keyboard</primary>"
449 msgstr "<primary>レイアウト、キーボード</primary>"
450
451 # Checked-By: Ryuunosuke Ayanokouzi;
452 #, fuzzy
453 #| msgid "<primary>choice</primary><secondary>of country</secondary>"
454 msgid "<primary>choice</primary><secondary>of keyboard layout</secondary>"
455 msgstr "<primary sortas=\"センタク\">選択</primary><secondary sortas=\"クニノセンタク\">国の選択</secondary>"
456
457 # Checked-By: Ryuunosuke Ayanokouzi;
458 msgid "The proposed “American English” keyboard corresponds to the usual QWERTY layout."
459 msgstr "ここで提案された「日本語」キーボードは日本で主流の QWERTY レイアウトです。"
460
461 # Checked-By: Ryuunosuke Ayanokouzi;
462 msgid "Choice of keyboard"
463 msgstr "キーボードの選択"
464
465 # Checked-By: Ryuunosuke Ayanokouzi;
466 msgid "Detecting Hardware"
467 msgstr "ハードウェアの検出"
468
469 # Checked-By: Ryuunosuke Ayanokouzi;
470 #, fuzzy
471 #| msgid "<primary>system</primary><secondary>base</secondary>"
472 msgid "<primary>detecting</primary><secondary>hardware</secondary>"
473 msgstr "<primary>システム</primary><secondary sortas=\"キホンシステム\">基本システム</secondary>"
474
475 # Checked-By: Ryuunosuke Ayanokouzi;
476 msgid "This step is completely automatic in the vast majority of cases. The installer detects your hardware, and tries to identify the CD-ROM drive used in order to access its content. It loads the modules corresponding to the various hardware components detected, and then “mounts” the CD-ROM in order to read it. The previous steps were completely contained in the boot image included on the CD, a file of limited size and loaded into memory by the BIOS when booting from the CD."
477 msgstr "ほとんどの場合、ハードウェア検出は完全に自動的に行われます。インストーラがハードウェアを検出し、CD の内容を読み出すために CD-ROM ドライブを特定しようと試みます。インストーラは検出されたさまざまなハードウェアに対応するモジュールを読み込み、その後 CD-ROM を「マウント」して内容を読みます。ここまでの段階を CD に含まれる起動イメージ (サイズが制限されており、CD からの起動時に BIOS がメモリ内に読み込んだファイル) が担当しています。"
478
479 # Checked-By: Ryuunosuke Ayanokouzi;
480 #, fuzzy
481 #| msgid "The installer can work with the vast majority of drives, especially standard ATAPI peripherals (sometimes called IDE and EIDE). However, if detection of the CD-ROM reader fails, the installer offers the choice to load a kernel module (for instance from a USB key) corresponding to the CD-ROM driver."
482 msgid "The installer can work with the vast majority of drives, especially standard ATAPI peripherals (sometimes called IDE and EIDE). However, if detection of the CD-ROM reader fails, the installer offers the choice to load a kernel module (for instance, from a USB key) corresponding to the CD-ROM driver."
483 msgstr "インストーラはほぼすべてのドライブ、特に標準的な ATAPI 周辺機器 (IDE や EIDE と呼ばれることもあります)、を取り扱うことが可能です。しかし、CD-ROM ドライブの検出に失敗する場合、インストーラは CD-ROM ドライバに相当するカーネルモジュールを (たとえば USB メモリから) 読み込むための画面を表示します。"
484
485 # Checked-By: Ryuunosuke Ayanokouzi;
486 msgid "Loading Components"
487 msgstr "コンポーネントの読み込み"
488
489 # Checked-By: Ryuunosuke Ayanokouzi;
490 msgid "With the contents of the CD now available, the installer loads all the files necessary to continue with its work. This includes additional drivers for the remaining hardware (especially the network card), as well as all the components of the installation program."
491 msgstr "CD の内容が利用できるようになったら、インストーラは以降の作業に必要なすべてのファイルを読み込みます。これには、残りのハードウェア (特にネットワークカード) 用の追加ドライバおよびインストールプログラムの構成要素が含まれます。"
492
493 # Checked-By: Ryuunosuke Ayanokouzi;
494 msgid "Detecting Network Hardware"
495 msgstr "ネットワークハードウェアの検出"
496
497 # Checked-By: Ryuunosuke Ayanokouzi;
498 #, fuzzy
499 #| msgid "<primary>boot</primary><secondary>loader</secondary>"
500 msgid "<primary>detecting</primary><secondary>network hardware</secondary>"
501 msgstr "<primary>ブートローダ</primary>"
502
503 # Checked-By: Ryuunosuke Ayanokouzi;
504 #, fuzzy
505 #| msgid "This automatic step tries to identify the network card and load the corresponding module. If automatic detection fails, you can manually select the module to load. If no module works, it is possible to load a specific module from a removable device. This last solution is usually only needed if the appropriate driver is not included in the standard Linux kernel, but available elsewhere, such as the manufacturer's website."
506 msgid "This automatic step tries to identify the network card and load the corresponding module. If automatic detection fails, you can manually select the module to load. If no module works, it is possible to load a specific module from a removable device. This last solution is usually only needed if the appropriate driver is not included in the standard Linux kernel, but available elsewhere, such as the manufacturer's website or in firmware archives/packages. <ulink type=\"block\" url=\"https://www.debian.org/devel/debian-installer/#firmware_nonfree\" />"
507 msgstr "この段階でインストーラは、ネットワークカードを自動的に特定し、関連するモジュールを自動的に読み込もうとします。自動検出に失敗した場合でも、手作業で読み込むモジュールを選択できます。どのモジュールでも動かなければ、リムーバブルデバイスから個々のモジュールをロードすることが可能です。最後に挙げた解決策は、適切なドライバが標準的な Linux カーネルには含まれていないけれども、メーカーのウェブサイトなど別のどこかから入手できる、という場合のみ必要です。"
508
509 # Checked-By: Ryuunosuke Ayanokouzi;
510 msgid "This step must absolutely be successful for <emphasis>netinst</emphasis> installations, since the Debian packages must be loaded from the network."
511 msgstr "<emphasis>netinst</emphasis> を使ってインストールする場合、Debian パッケージはネットワークから読み込まれるため、この段階は間違いなく成功するでしょう。"
512
513 # Checked-By: Ryuunosuke Ayanokouzi;
514 msgid "Configuring the Network"
515 msgstr "ネットワークの設定"
516
517 # Checked-By: Ryuunosuke Ayanokouzi;
518 msgid "<primary>configuration</primary><secondary>network</secondary><tertiary>static</tertiary>"
519 msgstr "<primary sortas=\"セッテイ\">設定</primary><secondary>ネットワーク</secondary><tertiary sortas=\"セイテキ\">静的</tertiary>"
520
521 # Checked-By: Ryuunosuke Ayanokouzi;
522 msgid "<primary>configuration</primary><secondary>network</secondary><tertiary>DHCP</tertiary>"
523 msgstr "<primary sortas=\"セッテイ\">設定</primary><secondary>ネットワーク</secondary><tertiary>DHCP</tertiary>"
524
525 # Checked-By: Ryuunosuke Ayanokouzi;
526 msgid "In order to automate the process as much as possible, the installer attempts an automatic network configuration by DHCP (for IPv4) and by IPv6 network discovery. If this fails, it offers more choices: try again with a normal DHCP configuration, attempt DHCP configuration by declaring the name of the machine, or set up a static network configuration."
527 msgstr "可能な限り各段階を自動化するために、インストーラは DHCP (IPv4 の場合) と IPv6 のネットワーク発見機能を使って自動的にネットワークを設定しようとします。設定に失敗した場合、多くの選択肢が提案されます。ここで提案される選択肢には、通常の DHCP 設定で再挑戦、マシンの名前を宣言して DHCP を設定、静的なネットワークを設定、があります。"
528
529 # Checked-By: Ryuunosuke Ayanokouzi;
530 msgid "This last option requires an IP address, a subnet mask, an IP address for a potential gateway, a machine name, and a domain name."
531 msgstr "ここで挙げた最後の選択肢を選んだ場合、IP アドレス、サブネットマスク、ゲートウェイの IP アドレス、マシン名、ドメイン名、の情報が必要です。"
532
533 # Checked-By: Ryuunosuke Ayanokouzi;
534 msgid "<emphasis>TIP</emphasis> Configuration without DHCP"
535 msgstr "<emphasis>TIP</emphasis> DHCP を使わない設定"
536
537 # Checked-By: Ryuunosuke Ayanokouzi;
538 #, fuzzy
539 #| msgid "If the local network is equipped with a DHCP server that you do not wish to use because you prefer to define a static IP address for the machine during installation, you can add the <userinput>netcfg/use_dhcp=false</userinput> option when booting from the CD-ROM. You just need to go to the desired menu entry by pressing the <keycap>TAB</keycap> key and add the desired option before pressing the <keycap>Enter</keycap> key."
540 msgid "If the local network is equipped with a DHCP server that you do not wish to use, because you prefer to define a static IP address for the machine during installation, you can add the <userinput>netcfg/use_dhcp=false</userinput> option when booting from the installation media. You just need to go to the desired menu entry by pressing the <keycap>TAB</keycap> key and add the desired option before pressing the <keycap>Enter</keycap> key."
541 msgstr "インストール中にマシンに静的 IP アドレスを定義したいのでローカルネットワーク内で動いている DHCP サーバを使わせたくない場合、CD-ROM から起動する際に <userinput>netcfg/use_dhcp=false</userinput> オプションを追加してください。起動したいメニューエントリにカーソルを合わせた状態で <keycap>TAB</keycap> キーを押して、<keycap>Enter</keycap> キーを押す前に必要なオプションを追加してください。"
542
543 # Checked-By: Ryuunosuke Ayanokouzi;
544 msgid "<emphasis>BEWARE</emphasis> Do not improvise"
545 msgstr "<emphasis>BEWARE</emphasis> 場当たり的な設定の禁止"
546
547 # Checked-By: Ryuunosuke Ayanokouzi;
548 msgid "Many local area networks are based on an implicit assumption that all machines can be trusted, and inadequate configuration of a single computer will often perturb the whole network. As a result, do not connect your machine to a network without first agreeing with its administrator on the appropriate settings (for example, the IP address, netmask, and broadcast address)."
549 msgstr "多くのローカルエリアネットワークはすべてのマシンが信頼できるという暗黙の了解の下に成り立っており、1 台でも不適切な設定のコンピュータがあるとネットワーク全体が混乱します。つまり、あなたのマシンを勝手にローカルエリアネットワークへ接続する前に、ネットワーク管理者から適切な設定 (たとえば、IP アドレス、ネットマスク、ブロードキャストアドレス) を教わってください。"
550
551 # Checked-By: Ryuunosuke Ayanokouzi;
552 msgid "Administrator Password"
553 msgstr "管理者パスワード"
554
555 # Checked-By: Ryuunosuke Ayanokouzi;
556 msgid "<primary>account</primary><secondary>administrator account</secondary>"
557 msgstr "<primary>アカウント</primary><secondary sortas=\"カンリシャアカウント\">管理者アカウント</secondary>"
558
559 # Checked-By: Ryuunosuke Ayanokouzi;
560 #, fuzzy
561 #| msgid "<primary>account</primary><secondary>administrator account</secondary>"
562 msgid "<primary>account</primary><secondary>root account</secondary>"
563 msgstr "<primary>アカウント</primary><secondary sortas=\"カンリシャアカウント\">管理者アカウント</secondary>"
564
565 # Checked-By: Ryuunosuke Ayanokouzi;
566 #, fuzzy
567 #| msgid "<primary>installation</primary><secondary>of the system</secondary>"
568 msgid "<primary>administrator</primary><seealso>root</seealso>"
569 msgstr "<primary sortas=\"インストールサギョウ\">インストール作業</primary><secondary sortas=\"システムノインストールサギョウ\">システムのインストール作業</secondary>"
570
571 # Checked-By: Ryuunosuke Ayanokouzi;
572 #, fuzzy
573 #| msgid "<primary>volume</primary><secondary>group</secondary>"
574 msgid "<primary>super-user</primary><seealso>root</seealso>"
575 msgstr "<primary>ボリューム</primary><secondary>グループ</secondary>"
576
577 # Checked-By: Ryuunosuke Ayanokouzi;
578 #, fuzzy
579 #| msgid "<primary>proxy</primary>"
580 msgid "<primary>root</primary>"
581 msgstr "<primary>プロキシ</primary>"
582
583 # Checked-By: Ryuunosuke Ayanokouzi;
584 #, fuzzy
585 #| msgid "The super-user root account, reserved for the machine's administrator, is automatically created during installation; this is why a password is requested. The installer also asks for a confirmation of the password to prevent any input error which would later be difficult to amend."
586 msgid "The super-user root account, reserved for the machine's administrator, is automatically created during installation; this is why a password is requested. The installer also asks for a confirmation of the password to prevent any input error, which would later be difficult to amend. Note that you can leave both fields empty if you want the root account to be disabled. In that case, the login for the root user will be deactivated and the first regular user — that will be created by the installer in the next step — will have administrative rights through <command>sudo</command> (see <xref linkend=\"sect.sharing-admin-rights\" />)."
587 msgstr "マシンの管理者用に確保されているスーパーユーザ root アカウントはインストール中に自動的に作成されます。このため、パスワードが要求されます。インストーラは確認用にもう一度パスワードを尋ねます。これは後から修正することが難しい入力ミスを避けるためです。"
588
589 # Checked-By: Ryuunosuke Ayanokouzi;
590 msgid "<emphasis>SECURITY</emphasis> Administrator password"
591 msgstr "<emphasis>SECURITY</emphasis> 管理者パスワード"
592
593 # Checked-By: Ryuunosuke Ayanokouzi;
594 #, fuzzy
595 #| msgid "The root user's password should be long (8 characters or more) and impossible to guess. Indeed, any computer (and a fortiori any server) connected to the Internet is regularly targeted by automated connection attempts with the most obvious passwords. Sometimes it may even be subject to dictionary attacks, in which many combinations of words and numbers are tested as password. Avoid using the names of children or parents, dates of birth, etc.: many of your co-workers might know them, and you rarely want to give them free access to the computer in question."
596 msgid "The root user's password should be long (12 characters or more) and impossible to guess. Indeed, any computer (and a fortiori any server) connected to the Internet is regularly targeted by automated connection attempts with the most obvious passwords. Sometimes it may even be subject to dictionary attacks, in which many combinations of words and numbers are tested as password. Avoid using the names of children or parents, dates of birth, etc.: many of your co-workers might know them, and you rarely want to give them free access to the computer in question."
597 msgstr "root ユーザのパスワードは長くて (8 文字以上で) 推測できないものであるべきです。実際、インターネットに接続されたコンピュータ (さらにサーバ) はその種類を問わず、定期的に頻繁に使われるパスワードを用いた自動接続攻撃の標的にされます。時には、単語と数字の組み合わせをパスワードとして試す、辞書攻撃にさらされるかもしれません。子供や両親の名前、誕生日などをパスワードとして使わないでください。なぜなら、多くの同僚がそれを知っているかもしれないからです。さらに、そのような人にここでセットアップされている種類のコンピュータを自由に使わせてはいけません。"
598
599 # Checked-By: Ryuunosuke Ayanokouzi;
600 msgid "These remarks are equally applicable for other user passwords, but the consequences of a compromised account are less drastic for users without administrative rights."
601 msgstr "他のユーザのパスワードに対しても同じことが言えますが、管理権限を持たないユーザのアカウントが乗っ取られたとしても、その影響はそれほど大きくありません。"
602
603 # Checked-By: Ryuunosuke Ayanokouzi;
604 msgid "If inspiration is lacking, do not hesitate to use password generators, such as <command>pwgen</command> (in the package of the same name)."
605 msgstr "もし名案が浮かばなければ、遠慮せずに <command>pwgen</command> (同名のパッケージに含まれます) などのパスワード生成ソフトウェアを使ってください。"
606
607 # Checked-By: Ryuunosuke Ayanokouzi;
608 msgid "Creating the First User"
609 msgstr "1 人目のユーザの作成"
610
611 # Checked-By: Ryuunosuke Ayanokouzi;
612 msgid "Debian also imposes the creation of a standard user account so that the administrator doesn't get into the bad habit of working as root. The precautionary principle essentially means that each task is performed with the minimum required rights, in order to limit the damage caused by human error. This is why the installer will ask for the complete name of this first user, their username, and their password (twice, to prevent the risk of erroneous input)."
613 msgstr "Debian は管理者に root で作業するという悪習を身に付けさせないために、強制的に標準的なユーザアカウントを作成します。この予防原則は本質的に、人的ミスによる損害を抑えるためには必要最低限の権限だけで作業する必要がある、ということを意味しています。このため、インストーラは 1 人目のユーザの完全な名前、ユーザ名、パスワード (入力ミスの危険を防ぐために 2 回) を尋ねるでしょう。"
614
615 # Checked-By: Ryuunosuke Ayanokouzi;
616 msgid "Name of the first user"
617 msgstr "1 人目のユーザの名前"
618
619 # Checked-By: Ryuunosuke Ayanokouzi;
620 msgid "Configuring the Clock"
621 msgstr "時刻の設定"
622
623 # Checked-By: Ryuunosuke Ayanokouzi;
624 msgid "If the network is available, the system's internal clock is updated (in a one-shot way) from an NTP server. This way the timestamps on logs will be correct from the first boot. For them to remain consistently precise over time, an NTP daemon needs to be set up after initial installation (see <xref linkend=\"sect.time-synchronization\" />)."
625 msgstr "ネットワークを利用できる場合、システムの内部時計は NTP サーバを使って (1 度だけ) 更新されます。こうすることで、初回起動時以降のログのタイムスタンプが修正されます。常に正確な時刻に合わせるためには、最初のインストール後に NTP デーモンのセットアップが必要です (<xref linkend=\"sect.time-synchronization\" />を参照してください)。"
626
627 # Checked-By: Ryuunosuke Ayanokouzi;
628 msgid "Detecting Disks and Other Devices"
629 msgstr "ディスクや他のデバイスの検出"
630
631 # Checked-By: Ryuunosuke Ayanokouzi;
632 #, fuzzy
633 #| msgid "<primary>file</primary><secondary>system</secondary>"
634 msgid "<primary>detecting</primary><secondary>disks</secondary>"
635 msgstr "<primary>ファイル</primary><secondary>システム</secondary>"
636
637 # Checked-By: Ryuunosuke Ayanokouzi;
638 msgid "This step automatically detects the hard drives on which Debian may be installed. They will be presented in the next step: partitioning."
639 msgstr "この段階で Debian がインストールされるであろうハードドライブが自動的に検出されます。検出されたハードドライブは次の段階、パーティショニング、で表示されます。"
640
641 # Checked-By: Ryuunosuke Ayanokouzi;
642 msgid "Starting the Partitioning Tool"
643 msgstr "パーティショニングツールの開始"
644
645 # Checked-By: Ryuunosuke Ayanokouzi;
646 msgid "<primary>partitioning</primary>"
647 msgstr "<primary>パーティショニング</primary>"
648
649 # Checked-By: Ryuunosuke Ayanokouzi;
650 msgid "<emphasis>CULTURE</emphasis> Uses of partitioning"
651 msgstr "<emphasis>CULTURE</emphasis> パーティショニング法"
652
653 # Checked-By: Ryuunosuke Ayanokouzi;
654 msgid "Partitioning, an indispensable step in installation, consists in dividing the available space on the hard drives (each subdivision thereof being called a “partition”) according to the data to be stored on it and the use for which the computer is intended. This step also includes choosing the filesystems to be used. All of these decisions will have an influence on performance, data security, and the administration of the server."
655 msgstr "パーティショニングはインストール時に必ず必要な作業で、ハードドライブ上の利用できる領域をハードドライブ上に保存されるであろうデータとコンピュータで予定されている用途に従って分割する作業です (分割されたそれぞれの区画を「パーティション」と呼びます)。パーティショニングの段階で、使用するファイルシステムを選択します。これらすべてが、性能、データのセキュリティ、サーバの管理、に影響をおよぼします。"
656
657 # Checked-By: Ryuunosuke Ayanokouzi;
658 msgid "The partitioning step is traditionally difficult for new users. It is necessary to define the various portions of the disks (or “partitions”) on which the Linux filesystems and virtual memory (swap) will be stored. This task is complicated if another operating system that you want to keep is already on the machine. Indeed, you will then have to make sure that you do not alter its partitions (or that you resize them without causing damage)."
659 msgstr "その昔、パーティショニングは新規ユーザにとって難しい作業でした。パーティショニングには、Linux ファイルシステムと仮想メモリ (スワップ) が保存されるディスクの一区画 (「パーティション」) を定義する必要があります。この作業は、残しておきたい既存の他のオペレーティングシステムがマシン上にある場合に、複雑になります。実際には、既存のシステムのパーティションを変更しない (または、損害を与えずにパーティションのサイズを変更する) ように注意しなければいけません。"
660
661 # Checked-By: Ryuunosuke Ayanokouzi;
662 msgid "Fortunately, the partitioning software has a “guided” mode which recommends partitions for the user to make — in most cases, you can simply validate the software's suggestions."
663 msgstr "幸いなことに、インストーラに含まれるパーティショニングソフトウェアは「ガイド付き」モードを備えています。このモードを使う場合、ユーザにパーティショニング方法の候補が提示されます。多くの場合、ソフトウェアの提案を確認するだけで事足ります。"
664
665 # Checked-By: Ryuunosuke Ayanokouzi;
666 msgid "Choice of partitioning mode"
667 msgstr "パーティショニング方法の選択"
668
669 # Checked-By: Ryuunosuke Ayanokouzi;
670 #, fuzzy
671 #| msgid "The first screen in the partitioning tool offers the choice of using an entire hard drive to create various partitions. For a (new) computer which will solely use Linux, this option is clearly the simplest, and you can choose the option “Guided - use entire disk”. If the computer has two hard drives for two operating systems, setting one drive for each is also a solution that can facilitate partitioning. In both of these cases, the next screen offers to choose the disk where Linux will be installed by selecting the corresponding entry (for example, “SCSI3 (0,0,0) (sda) - 17.2 GB ATA VBOX HARDDISK”). You then start guided partitioning."
672 msgid "The first screen in the partitioning tool offers the choice of using an entire hard drive to create various partitions. For a (new) computer which will solely use Linux, this option is clearly the simplest, and you can choose the option “Guided - use entire disk”. If the computer has two hard drives for two operating systems, setting one drive for each is also a solution that can facilitate partitioning. In both of these cases, the next screen offers to choose the disk where Linux will be installed by selecting the corresponding entry (for example, “SCSI1 (0,0,0) (sda) - 53.7 GB ATA QEMU HARDDISK”). You then start guided partitioning."
673 msgstr "パーティショニングツールの最初の画面では、ハードドライブ全体を使ってパーティションを作成する選択肢が表示されます。(新しい) コンピュータに Linux だけをインストールする場合、このパーティショニング方法が明らかに最も単純です。この場合「ガイド - ディスク全体を使う」を選んでください。コンピュータに 2 種類のオペレーティングシステム用の 2 台のハードドライブが装備されている場合、ドライブごとにオペレーティングシステムを分けるのも解決策の 1 つです。こうすることでパーティショニングが楽になります。どちらの場合も、次の画面では、関連するエントリから Linux をインストールするディスク (たとえば「SCSI3 (0,0,0) (sda) - 17.2 GB ATA VBOX HARDDISK」) を選択します。その後、ガイド付きのパーティショニングが始まります。"
674
675 # Checked-By: Ryuunosuke Ayanokouzi;
676 msgid "Disk to use for guided partitioning"
677 msgstr "ガイド付きパーティショニングを適用するディスク"
678
679 # Checked-By: Ryuunosuke Ayanokouzi;
680 msgid "Guided partitioning can also set up LVM logical volumes instead of partitions (see below). Since the remainder of the operation is the same, we will not go over the option “Guided - use entire disk and set up LVM” (encrypted or not)."
681 msgstr "ガイド付きパーティショニングでは、パーティションの代わりに LVM 論理ボリュームを作成することも可能です (LVM については後から説明します)。残りの操作は同じですから、「ガイド - ディスク全体を使い LVM をセットアップする」の選択肢 (暗号化の有無に関わらず) については説明しません。"
682
683 # Checked-By: Ryuunosuke Ayanokouzi;
684 msgid "In other cases, when Linux must work alongside other already existing partitions, you need to choose manual partitioning."
685 msgstr "他の事例、たとえば Linux を既存のパーティションと共存させたい場合、手作業でパーティショニングを実行しなければいけません。"
686
687 # Checked-By: Ryuunosuke Ayanokouzi;
688 msgid "Guided partitioning"
689 msgstr "ガイド付きパーティショニング"
690
691 # Checked-By: Ryuunosuke Ayanokouzi;
692 msgid "<primary>partitioning</primary><secondary>guided partitioning</secondary>"
693 msgstr "<primary>パーティショニング</primary><secondary sortas=\"ガイドツキパーティショニング\">ガイド付きパーティショニング</secondary>"
694
695 # Checked-By: Ryuunosuke Ayanokouzi;
696 msgid "The guided partitioning tool offers three partitioning methods, which correspond to different usages."
697 msgstr "ガイド付きパーティショニングツールでは、それぞれ別の用途に適した 3 種類のパーティショニング機構を選択できます。"
698
699 # Checked-By: Ryuunosuke Ayanokouzi;
700 msgid "The first method is called “All files in one partition”. The entire Linux system tree is stored in a single filesystem, corresponding to the root <filename>/</filename> directory. This simple and robust partitioning fits perfectly for personal or single-user systems. In fact, two partitions will be created: the first will house the complete system, the second the virtual memory (swap)."
701 msgstr "1 番目のパーティショニング機構は「すべてのファイルを 1 つのパーティションに」です。これは、Linux システムツリー全体 (ルート <filename>/</filename> ディレクトリ以下すべて) を単一のファイルシステムに保存します。このパーティショニングは単純かつ頑強であり、個人および単一ユーザシステム用途にぴったりです。実際には、2 つのパーティションが作られます。具体的に言えば、システム全体用と仮想メモリ (swap) 用のパーティションが作られます。"
702
703 # Checked-By: Ryuunosuke Ayanokouzi;
704 # Tag: L-CFMD;
705 #, fuzzy
706 #| msgid "The second method, “Separate <filename>/home/</filename> partition”, is similar, but splits the file hierarchy in two: one partition contains the Linux system (<filename>/</filename>), and the second contains “home directories” (meaning user data, in files and subdirectories available under <filename>/home/</filename>)."
707 msgid "The second method, “Separate <filename>/home</filename> partition”, is similar, but splits the file hierarchy in two: one partition contains the Linux system (<filename>/</filename>), and the second contains “home directories” (meaning user data, in files and subdirectories available under <filename>/home/</filename>)."
708 msgstr "2 番目のパーティショニング機構は「<filename>/home</filename> パーティションの分割」です。これは、1 番目のパーティショニング機構とよく似ていますが、ファイル階層を 2 つに分離します。具体的に言えば、片方には Linux システム (<filename>/</filename>) を、もう片方には「ホームディレクトリ」(ユーザデータ、ファイルとサブディレクトリは <filename>/home/</filename> 以下に配置されます) を収めます。"
709
710 # Checked-By: Ryuunosuke Ayanokouzi;
711 # Tag: L-CFMD;
712 msgid "The last partitioning method, called “Separate <filename>/home</filename>, <filename>/var</filename>, and <filename>/tmp</filename> partitions”, is appropriate for servers and multi-user systems. It divides the file tree into many partitions: in addition to the root (<filename>/</filename>) and user accounts (<filename>/home/</filename>) partitions, it also has partitions for server software data (<filename>/var/</filename>), and temporary files (<filename>/tmp/</filename>). These divisions have several advantages. Users can not lock up the server by consuming all available hard drive space (they can only fill up <filename>/tmp/</filename> and <filename>/home/</filename>). The daemon data (especially logs) can no longer clog up the rest of the system."
713 msgstr "最後のパーティショニング機構は「<filename>/home</filename>, <filename>/var</filename>, <filename>/tmp</filename> パーティションを分割」です。これはサーバや複数のユーザが利用するシステムに適しています。これはファイルツリーを多くのパーティションに分離します。具体的に言えば、ルート (<filename>/</filename>) とユーザアカウント (<filename>/home/</filename>) パーティションの分離に加え、サーバソフトウェアのデータ (<filename>/var/</filename>) と一時ファイル (<filename>/tmp/</filename>) 用パーティションも分離します。ファイルツリーが格納されるパーティションをこのように分離するとさまざまな利点を得ることが可能です。ユーザが利用できるハードドライブ領域を使い切ってしまうことでサーバが動かなくなることがなくなります (ユーザが満杯にできるハードドライブ領域を <filename>/tmp/</filename> と <filename>/home/</filename> だけに制限できます)。さらにデーモンのデータ (特にログ) がシステムの他の領域を圧迫することがなくなります。"
714
715 # Checked-By: Ryuunosuke Ayanokouzi;
716 msgid "<emphasis>BACK TO BASICS</emphasis> Choosing a filesystem"
717 msgstr "<emphasis>BACK TO BASICS</emphasis> ファイルシステムの選択"
718
719 # Checked-By: Ryuunosuke Ayanokouzi;
720 msgid "<primary>system</primary><secondary>filesystem</secondary>"
721 msgstr "<primary>システム</primary><secondary>ファイルシステム</secondary>"
722
723 # Checked-By: Ryuunosuke Ayanokouzi;
724 #, fuzzy
725 #| msgid "<primary>file</primary><secondary>system</secondary>"
726 msgid "<primary>file</primary><secondary>system file</secondary>"
727 msgstr "<primary>ファイル</primary><secondary>システム</secondary>"
728
729 # Checked-By: Ryuunosuke Ayanokouzi;
730 #, fuzzy
731 #| msgid "<primary>swap</primary>"
732 msgid "<primary>filesystem</primary>"
733 msgstr "<primary>スワップ</primary>"
734
735 # Checked-By: Ryuunosuke Ayanokouzi;
736 msgid "A filesystem defines the way in which data is organized on the hard drive. Each existing filesystem has its merits and limitations. Some are more robust, others more effective: if you know your needs well, choosing the most appropriate filesystem is possible. Various comparisons have already been made; it seems that <emphasis>ReiserFS</emphasis> is particularly efficient for reading many small files; <emphasis>XFS</emphasis>, in turn, works faster with large files. <emphasis>Ext4</emphasis>, the default filesystem for Debian, is a good compromise, based on the three previous versions of filesystems historically used in Linux (<emphasis>ext</emphasis>, <emphasis>ext2</emphasis> and <emphasis>ext3</emphasis>). <emphasis>Ext4</emphasis> overcomes certain limitations of <emphasis>ext3</emphasis> and is particularly appropriate for very large capacity hard drives. Another option would be to experiment with the very promising <emphasis>btrfs</emphasis>, which includes numerous features that require, to this day, the use of LVM and/or RAID."
737 msgstr "ファイルシステムはハードドライブにデータを格納する方法を定義しています。既存のファイルシステムにはそれぞれ長所と制限があります。頑強なものもあれば、効率のよいものもあります。すなわち、自分の必要としていることをよく理解している人は最も適切なファイルシステムを選択することが可能です。既にさまざまなファイルシステムに対する長所や制限が比較検討されています。たとえば <emphasis>ReiserFS</emphasis> ファイルシステムは、多くの小さなファイルを読む場合は特に効率が良いとされています。また、<emphasis>XFS</emphasis> は巨大なファイルを高速に取り扱えます。Debian のデフォルトファイルシステムである <emphasis>ext4</emphasis> は良い妥協点で、昔から Linux で使われてきた 3 つの古いファイルシステム (<emphasis>ext</emphasis>、<emphasis>ext2</emphasis>、<emphasis>ext3</emphasis>) を基に開発されました。<emphasis>ext4</emphasis> は <emphasis>ext3</emphasis> にあったいくつかの制限を克服しており、とりわけ大容量のハードドライブに適しています。将来が期待されている <emphasis>btrfs</emphasis> を試すという選択肢もあります。<emphasis>btrfs</emphasis> は最近の LVM または RAID を使用する際に要求される非常に多くの機能を備えています。"
738
739 # Checked-By: Ryuunosuke Ayanokouzi;
740 msgid "A journalized filesystem (such as <emphasis>ext3</emphasis>, <emphasis>ext4</emphasis>, <emphasis>btrfs</emphasis>, <emphasis>reiserfs</emphasis>, or <emphasis>xfs</emphasis>) takes special measures to make it possible to return to a prior consistent state after an abrupt interruption without completely analyzing the entire disk (as was the case with the <emphasis>ext2</emphasis> system). This functionality is carried out by filling in a journal that describes the operations to conduct prior to actually executing them. If an operation is interrupted, it will be possible to “replay” it from the journal. Conversely, if an interruption occurs during an update of the journal, the last requested change is simply ignored; the data being written could be lost, but since the data on the disk has not changed, they have remained coherent. This is nothing more nor less than a transactional mechanism applied to the filesystem."
741 msgstr "ジャーナル化されたファイルシステム (<emphasis>ext3</emphasis>、<emphasis>ext4</emphasis>、<emphasis>btrfs</emphasis>、<emphasis>reiserfs</emphasis>、<emphasis>xfs</emphasis> など) では、突発的な障害が起きた際にディスク全体を完全に解析することなく (<emphasis>ext2</emphasis> システムでは完全に解析することが必要でした) ファイルシステムを以前の整合性の取れた状態に戻せるようにするために、特別な対策が取られています。実際に作業を実行する前に、その作業の内容をジャーナルに書き込むことにより、この対策機能は実現されています。作業が中断された場合、ジャーナルを使って作業を「再実行」することが可能です。逆に言うと、ジャーナルの更新中に障害が発生した場合、最後の作業は単純に無視されます。その結果、ジャーナルに書き込まれたデータは失われるかもしれませんが、ディスク上のデータは変更されていないので、整合性が保たれます。これはまさにファイルシステムに対するトランザクション処理と言えます。"
742
743 # Checked-By: Ryuunosuke Ayanokouzi;
744 msgid "After choosing the type of partition, the software calculates a suggestion, and describes it on the screen; the user can then modify it if needed. You can, in particular, choose another filesystem if the standard choice (<emphasis>ext4</emphasis>) isn't appropriate. In most cases, however, the proposed partitioning is reasonable and it can be accepted by selecting the “Finish partitioning and write changes to disk” entry."
745 msgstr "パーティションの種類を選択した後、ガイド付きパーティショニングツールはパーティショニング案を算出し、画面に提示します。必要であれば、ユーザはパーティショニング案を変更することも可能です。特に、標準的なファイルシステム (<emphasis>ext4</emphasis>) が不適切な場合は、別のファイルシステムを選択することが可能です。しかしながら多くの場合、インストーラの提示したパーティショニング案は妥当です。承諾するには「パーティショニングの終了とディスクへの変更の書き込み」エントリを選択してください。"
746
747 # Checked-By: Ryuunosuke Ayanokouzi;
748 msgid "Validating partitioning"
749 msgstr "パーティショニングの確認"
750
751 # Checked-By: Ryuunosuke Ayanokouzi;
752 msgid "Manual Partitioning"
753 msgstr "手作業のパーティショニング"
754
755 # Checked-By: Ryuunosuke Ayanokouzi;
756 msgid "<primary>partitioning</primary><secondary>manual partitioning</secondary>"
757 msgstr "<primary>パーティショニング</primary><secondary sortas=\"テサギョウノパーティショニング\">手作業のパーティショニング</secondary>"
758
759 # Checked-By: Ryuunosuke Ayanokouzi;
760 msgid "Manual partitioning allows greater flexibility, allowing the user to choose the purpose and size of each partition. Furthermore, this mode is unavoidable if you wish to use software RAID."
761 msgstr "手作業でパーティショニングを実行すればより柔軟にパーティションを設定できます (各パーティションの目的とサイズを選ぶことが可能です)。また、ソフトウェア RAID を希望する場合、手作業でパーティショニングを実行しなければいけません。"
762
763 # Checked-By: Ryuunosuke Ayanokouzi;
764 msgid "<emphasis>IN PRACTICE</emphasis> Shrinking a Windows partition"
765 msgstr "<emphasis>IN PRACTICE</emphasis> Windows パーティションの縮小"
766
767 # Checked-By: Ryuunosuke Ayanokouzi;
768 msgid "<primary>resize a partition</primary>"
769 msgstr "<primary>パーティション</primary><secondary sortas=\"サイズヘンコウ\">サイズ変更</secondary>"
770
771 # Checked-By: Ryuunosuke Ayanokouzi;
772 msgid "<primary>shrink a partition</primary>"
773 msgstr "<primary>パーティション</primary><secondary sortas=\"シュクショウ\">縮小</secondary>"
774
775 # Checked-By: Ryuunosuke Ayanokouzi;
776 msgid "To install Debian alongside an existing operating system (Windows or other), you must have some available hard drive space that is not being used by the other system in order to be able to create the partitions dedicated to Debian. In most cases, this means shrinking a Windows partition and reusing the freed space."
777 msgstr "Debian を他のオペレーティングシステム (Windows など) と共存させてインストールする場合、Debian 専用のパーティションを作成するためには、他のシステムから使われていないハードドライブ領域を必要とします。多くの場合、これは Windows パーティションを縮小し、できた空き領域を再利用することを意味しています。"
778
779 # Checked-By: Ryuunosuke Ayanokouzi;
780 #, fuzzy
781 #| msgid "The Debian installer allows this operation when using the manual mode for partitioning. You only need to choose the Windows partition and enter its new size (this works the same with both FAT and NTFS partitions)."
782 msgid "The Debian installer allows this operation when using the manual mode for partitioning. You only need to choose the Windows partition and enter its new size (this works the same with both unencrypted FAT and NTFS partitions)."
783 msgstr "Debian インストーラでは、手作業でパーティショニングを実行すれば、パーティションの縮小作業を実行できます。パーティションを縮小するには Windows パーティションを選択し、新しいサイズを入力するだけです (Debian インストーラは FAT と NTFS の両方のパーティションの縮小に対応しています)。"
784
785 msgid "If Windows is using BitLocker-encrypted partitions, the steps to resize them requires to use the BitLocker Management together with the Windows Disk Management tool."
786 msgstr ""
787
788 # Checked-By: Ryuunosuke Ayanokouzi;
789 msgid "The first screen displays the available disks, their partitions, and any possible free space that has not yet been partitioned. You can select each displayed element; pressing the <keycap>Enter</keycap> key then gives a list of possible actions."
790 msgstr "最初の画面では、利用できるディスク、パーティション、パーティションを割り当てられていない空き領域が表示されます。表示されたそれぞれの要素を選択できます。さらに <keycap>Enter</keycap> キーを押せば、実行できる操作のリストが表示されます。"
791
792 # Checked-By: Ryuunosuke Ayanokouzi;
793 msgid "You can erase all partitions on a disk by selecting it."
794 msgstr "ディスクを選択すれば、そのディスク上のすべてのパーティションを削除できます。"
795
796 # Checked-By: Ryuunosuke Ayanokouzi;
797 msgid "When selecting free space on a disk, you can manually create a new partition. You can also do this with guided partitioning, which is an interesting solution for a disk that already contains another operating system, but which you may wish to partition for Linux in a standard manner. See <xref linkend=\"sect.install-autopartman-mode\" /> for more details on guided partitioning."
798 msgstr "ディスクの空き領域を選択すれば、新しいパーティションを作成できます。ガイド付きパーティショニングを空き領域に適用することも可能です。この方法は、ディスクには別のオペレーティングシステムがインストールされているけれども、標準的なやり方で Linux のパーティショニングを実行したいという場合に興味深い解決策です。ガイド付きパーティショニングに関する詳しい情報は<xref linkend=\"sect.install-autopartman-mode\" />をご覧ください。"
799
800 # Checked-By: Ryuunosuke Ayanokouzi;
801 #, fuzzy
802 #| msgid "Validating partitioning"
803 msgid "Editing/creating a partition"
804 msgstr "パーティショニングの確認"
805
806 # Checked-By: Ryuunosuke Ayanokouzi;
807 msgid "<emphasis>BACK TO BASICS</emphasis> Mount point"
808 msgstr "<emphasis>BACK TO BASICS</emphasis> マウントポイント"
809
810 # Checked-By: Ryuunosuke Ayanokouzi;
811 msgid "<primary>mount point</primary>"
812 msgstr "<primary>マウントポイント</primary>"
813
814 # Checked-By: Ryuunosuke Ayanokouzi;
815 #, fuzzy
816 #| msgid "<primary>point, mount point</primary>"
817 msgid "<primary>point, mount</primary>"
818 msgstr "<primary>ポイント</primary><secondary>マウントポイント</secondary>"
819
820 # Checked-By: Ryuunosuke Ayanokouzi;
821 msgid "The mount point is the directory tree that will house the contents of the filesystem on the selected partition. Thus, a partition mounted at <filename>/home/</filename> is traditionally intended to contain user data."
822 msgstr "マウントポイントとは、パーティションに保存されたファイルシステムの内容を格納するディレクトリツリーです。つまり <filename>/home/</filename> にマウントされたパーティションにはユーザデータが格納されます。"
823
824 # Checked-By: Ryuunosuke Ayanokouzi;
825 msgid "When this directory is named “<filename>/</filename>”, it is known as the <emphasis>root</emphasis> of the file tree, and therefore the root of the partition that will actually host the Debian system."
826 msgstr "マウントポイントが「<filename>/</filename>」の場合、ファイルツリーの<emphasis>ルート</emphasis>を意味し、このパーティションのルートには Debian システムが格納されます。"
827
828 # Checked-By: Ryuunosuke Ayanokouzi;
829 msgid "<emphasis>BACK TO BASICS</emphasis> Virtual memory, swap"
830 msgstr "<emphasis>BACK TO BASICS</emphasis> 仮想メモリ、スワップ"
831
832 # Checked-By: Ryuunosuke Ayanokouzi;
833 msgid "<primary>virtual memory</primary>"
834 msgstr "<primary sortas=\"カソウメモリ\">仮想メモリ</primary>"
835
836 # Checked-By: Ryuunosuke Ayanokouzi;
837 msgid "<primary>swap</primary>"
838 msgstr "<primary>スワップ</primary>"
839
840 # Checked-By: Ryuunosuke Ayanokouzi;
841 msgid "<primary>partition</primary><secondary>swap partition</secondary>"
842 msgstr "<primary>パーティション</primary><secondary>スワップパーティション</secondary>"
843
844 # Checked-By: Ryuunosuke Ayanokouzi;
845 #, fuzzy
846 #| msgid "<primary>partition</primary><secondary>swap partition</secondary>"
847 msgid "<primary>swap</primary><secondary>partition</secondary>"
848 msgstr "<primary>パーティション</primary><secondary>スワップパーティション</secondary>"
849
850 # Checked-By: Ryuunosuke Ayanokouzi;
851 #, fuzzy
852 #| msgid "<primary>system</primary><secondary>filesystem</secondary>"
853 msgid "<primary>swap</primary><secondary>file</secondary>"
854 msgstr "<primary>システム</primary><secondary>ファイルシステム</secondary>"
855
856 # Checked-By: Ryuunosuke Ayanokouzi;
857 #, fuzzy
858 #| msgid "<primary>file</primary><secondary>system</secondary>"
859 msgid "<primary>file</primary><secondary>swap file</secondary>"
860 msgstr "<primary>ファイル</primary><secondary>システム</secondary>"
861
862 # Checked-By: Ryuunosuke Ayanokouzi;
863 #, fuzzy
864 #| msgid "Virtual memory allows the Linux kernel, when lacking sufficient memory (RAM), to free a bit of storage by storing the parts of the RAM that have been inactive for some time on the swap partition of the hard disk."
865 msgid "Virtual memory allows the Linux kernel, when lacking sufficient memory (RAM), to free a bit of memory by storing the parts of the RAM that have been inactive for some time on the swap partition of the hard disk. It is also fundamental to the \"Suspend\" and \"Hibernate\" features of a system."
866 msgstr "Linux カーネルは、仮想メモリのおかげでメモリ (RAM) の空き領域が不足した際にしばらくの間使われていない RAM の内容をハードディスクのスワップパーティションに保存して、少しの RAM 空き領域を確保することが可能です。"
867
868 # Checked-By: Ryuunosuke Ayanokouzi;
869 #, fuzzy
870 #| msgid "To simulate the additional memory, Windows uses a swap file that is directly contained in a filesystem. Conversely, Linux uses a partition dedicated to this purpose, hence the term “swap partition”."
871 msgid "To simulate the additional memory, Windows uses a swap file that is directly contained in a filesystem. Conversely, Linux uses a partition dedicated to this purpose, hence the term “swap partition”. But it is also able to use a swap file as well."
872 msgstr "仮想メモリのような付加的メモリを装うために、Windows ではファイルシステムに直接格納されるスワップファイルが利用されています。逆に、Linux ではこの目的専用のパーティション「スワップパーティション」が利用されています。"
873
874 # Checked-By: Ryuunosuke Ayanokouzi;
875 msgid "When choosing a partition, you can indicate the manner in which you are going to use it:"
876 msgstr "以下は、パーティションを選んだ後に指定できる、選択したパーティションの取り扱い方のリストです。"
877
878 # Checked-By: Ryuunosuke Ayanokouzi;
879 msgid "format it and include it in the file tree by choosing a mount point;"
880 msgstr "選択したパーティションをフォーマットし、マウントポイントを指定してパーティションをファイルツリーに含めます。"
881
882 # Checked-By: Ryuunosuke Ayanokouzi;
883 msgid "use it as a swap partition;"
884 msgstr "選択したパーティションをスワップパーティションとして使います。"
885
886 # Checked-By: Ryuunosuke Ayanokouzi;
887 msgid "make it into a “physical volume for encryption” (to protect the confidentiality of data on certain partitions, see below);"
888 msgstr "選択したパーティションを「暗号化物理ボリューム」にします (パーティションに含まれる秘密のデータを守るには、以下を参照してください)。"
889
890 # Checked-By: Ryuunosuke Ayanokouzi;
891 msgid "make it a “physical volume for LVM” (this concept is discussed in greater detail later in this chapter);"
892 msgstr "選択したパーティションを「LVM 用物理ボリューム」にします (LVM の概念は、この章の後で詳しく議論します)。"
893
894 # Checked-By: Ryuunosuke Ayanokouzi;
895 msgid "use it as a RAID device (see later in this chapter);"
896 msgstr "選択したパーティションを RAID デバイスとして利用します (この章の後半を参照してください)。"
897
898 # Checked-By: Ryuunosuke Ayanokouzi;
899 msgid "you can also choose not to use it, and therefore leave it unchanged."
900 msgstr "選択したパーティションを使わないことにして、そのままにしておくことも可能です。"
901
902 # Checked-By: Ryuunosuke Ayanokouzi;
903 msgid "Configuring Multidisk Devices (Software RAID)"
904 msgstr "マルチディスクデバイスの設定 (ソフトウェア RAID)"
905
906 # Checked-By: Ryuunosuke Ayanokouzi;
907 msgid "<primary>RAID</primary><secondary>Software RAID</secondary>"
908 msgstr "<primary>RAID</primary><secondary>ソフトウェア RAID</secondary>"
909
910 # Checked-By: Ryuunosuke Ayanokouzi;
911 msgid "<primary>Software RAID</primary>"
912 msgstr "<primary>ソフトウェア RAID</primary>"
913
914 # Checked-By: Ryuunosuke Ayanokouzi;
915 msgid "<primary>device</primary><secondary>multi-disk device</secondary>"
916 msgstr "<primary>デバイス</primary><secondary>マルチディスクデバイス</secondary>"
917
918 # Checked-By: Ryuunosuke Ayanokouzi;
919 #, fuzzy
920 #| msgid "Some types of RAID allow the duplication of information stored on hard drives to prevent data loss in the event of a hardware problem affecting one of them. Level 1 RAID keeps a simple, identical copy (mirror) of a hard drive on another drive, while level 5 RAID splits redundant data over several disks, thus allowing the complete reconstruction of a failing drive."
921 msgid "Some types of RAID allow the duplication of information stored on hard drives to prevent data loss in the event of a hardware problem affecting one of them. Level 1 RAID keeps a simple, identical copy (mirror) of a hard drive on another drive, while level 5 or 6 RAID splits redundant data over several disks, thus allowing the complete reconstruction of a failing drive."
922 msgstr "一部の RAID レベルでは複数のハードドライブに保存された情報を複製することで、RAID を構成する 1 台のハードドライブがデータに影響をおよぼすハードウェア障害を起こした際にデータが消失することを防いでいます。レベル 1 RAID は単純で、2 台のハードドライブに全く同じデータの複製を作ります。これに対して、レベル 5 RAID は冗長データを複数のディスクに分散します。このため、障害の起きたドライブに含まれたデータを完全に復元することが可能です。"
923
924 # Checked-By: Ryuunosuke Ayanokouzi;
925 # Tag: L-CFMD;
926 msgid "We will only describe level 1 RAID, which is the simplest to implement. The first step involves creating two partitions of identical size located on two different hard drives, and to label them “physical volume for RAID”."
927 msgstr "ここでは最も簡単に設定できるレベル 1 RAID だけを説明します。最初に、全く同じサイズのパーティションを 2 つ別々のドライブに作成し、「RAID の物理ボリューム」とラベル付けします。"
928
929 # Checked-By: Ryuunosuke Ayanokouzi;
930 # Tag: L-CFMD;
931 msgid "You must then choose “Configure software RAID” in the partitioning tool to combine these two partitions into a new virtual disk and select “Create MD device” in the configuration screen. You then need to answer a series of questions about this new device. The first question asks about the RAID level to use, which in our case will be “RAID1”. The second question asks about the number of active devices — two in our case, which is the number of partitions that need to be included in this MD device. The third question is about the number of spare devices — 0; we have not planned any additional disk to take over for a possible defective disk. The last question requires you to choose the partitions for the RAID device — these would be the two that we have set aside for this purpose (make sure you only select the partitions that explicitly mention “raid”)."
932 msgstr "2 つのパーティションを 1 つの仮想ディスクにまとめるためにはパーティショニングツールで「ソフトウェア RAID の設定」を選び、設定画面で「MD デバイスの作成」を選んでください。その後、新しいデバイスに関する一連の質問に答える必要があります。最初の質問では、使用する RAID レベルを尋ねられます。今回の場合「RAID1」です。2 番目の質問では、アクティブデバイスの数を尋ねられます。アクティブデバイスの数とは MD デバイスに含めるパーティションの数で、今回の場合 2 台です。3 番目の質問では、予備デバイスの数を尋ねられます。今回の場合 0 台です。つまり、ディスク障害が起きた際に機能を代替させるためのディスクを追加する計画はないということです。最後の質問では、RAID デバイス用のパーティションを尋ねられます。これは事前に用意した 2 つのパーティションです (「raid」と明示されているパーティション以外は選ばないでください)。"
933
934 # Checked-By: Ryuunosuke Ayanokouzi;
935 msgid "Back to the main menu, a new virtual “RAID” disk appears. This disk is presented with a single partition which can not be deleted, but whose use we can choose (just like for any other partition)."
936 msgstr "メインメニューに戻ると、新しい仮想「RAID」ディスクが表示されます。このディスクは削除できない単一のパーティションとして表示されますが、選択すればこれを使用できます (他のパーティションと同じ方法で選択してください)。"
937
938 # Checked-By: Ryuunosuke Ayanokouzi;
939 msgid "For further details on RAID functions, please refer to <xref linkend=\"sect.raid-soft\" />."
940 msgstr "RAID 機能に関するより詳しい情報は<xref linkend=\"sect.raid-soft\" />を参照してください。"
941
942 # Checked-By: Ryuunosuke Ayanokouzi;
943 msgid "Configuring the Logical Volume Manager (LVM)"
944 msgstr "論理ボリュームマネージャ (LVM) の設定"
945
946 # Checked-By: Ryuunosuke Ayanokouzi;
947 #, fuzzy
948 #| msgid "<primary>volume</primary><secondary>logical volume</secondary>"
949 msgid "<primary>LVM</primary><seealso>Logical Volume Manager</seealso>"
950 msgstr "<primary>ボリューム</primary><secondary sortas=\"ロンリボリューム\">論理ボリューム</secondary>"
951
952 # Checked-By: Ryuunosuke Ayanokouzi;
953 msgid "<primary>Logical Volume Manager</primary><secondary>during installation</secondary>"
954 msgstr "<primary sortas=\"ロンリボリュームマネージャ\">論理ボリュームマネージャ</primary><secondary sortas=\"インストールチュウニオコナウロンリボリュームマネージャノセッテイ\">インストール中に行う論理ボリュームマネージャの設定</secondary>"
955
956 # Checked-By: Ryuunosuke Ayanokouzi;
957 msgid "LVM allows you to create “virtual” partitions that span over several disks. The benefits are twofold: the size of the partitions are no longer limited by individual disks but by their cumulative volume, and you can resize existing partitions at any time, possibly after adding an additional disk when needed."
958 msgstr "LVM を使うことで、複数のディスクにまたがる「仮想」パーティションを作成できます。LVM を使うことの利点は 2 つあります。具体的に言えば、パーティションのサイズは、もはや個々のディスクによって制限を受けるのではなく、累積ボリュームによって制限を受けます。さらにパーティションのサイズはいつでも (ディスクを追加した後などに) 変更できます。"
959
960 # Checked-By: Ryuunosuke Ayanokouzi;
961 # Tag: PTAL;
962 msgid "LVM uses a particular terminology: a virtual partition is a “logical volume”, which is part of a “volume group”, or an association of several “physical volumes”. Each of these terms in fact corresponds to a “real” partition (or a software RAID device)."
963 msgstr "LVM では特有の専門用語を使います。たとえば仮想パーティションは「論理ボリューム」と呼ばれます。「論理ボリューム」は「ボリュームグループ」の一部分を表し、「論理ボリューム」は複数の「物理ボリューム」群から構成されます。実際のところ、これらの専門用語は「実」パーティション (またはソフトウェア RAID デバイス) から作られるものです。"
964
965 # Checked-By: Ryuunosuke Ayanokouzi;
966 msgid "<primary>volume</primary><secondary>logical volume</secondary>"
967 msgstr "<primary>ボリューム</primary><secondary sortas=\"ロンリボリューム\">論理ボリューム</secondary>"
968
969 # Checked-By: Ryuunosuke Ayanokouzi;
970 msgid "<primary>volume</primary><secondary>physical volume</secondary>"
971 msgstr "<primary>ボリューム</primary><secondary sortas=\"ブツリボリューム\">物理ボリューム</secondary>"
972
973 # Checked-By: Ryuunosuke Ayanokouzi;
974 msgid "<primary>group</primary><secondary>of volumes</secondary>"
975 msgstr "<primary>グループ</primary><secondary sortas=\"ボリュームノグループ\">ボリュームのグループ</secondary>"
976
977 # Checked-By: Ryuunosuke Ayanokouzi;
978 msgid "<primary>volume</primary><secondary>group</secondary>"
979 msgstr "<primary>ボリューム</primary><secondary>グループ</secondary>"
980
981 # Checked-By: Ryuunosuke Ayanokouzi;
982 msgid "This technique works in a very simple way: each volume, whether physical or logical, is split into blocks of the same size, which are made to correspond by LVM. The addition of a new disk will cause the creation of a new physical volume, and these new blocks can be associated to any volume group. All of the partitions in the volume group that is thus expanded will have additional space into which they can extend."
983 msgstr "LVM はとても単純な方法で実現されています。すなわち、それぞれのボリュームは物理であるか論理であるかに関わらず同じサイズのブロックに分割され、ブロックは LVM に対応付けられます。新しいディスクを追加した場合は新しい物理ボリュームの作成が必要で、新しいブロックは任意のボリュームグループに関連付けることが可能です。拡張されたボリュームグループ内のすべてのパーティションは、ディスク領域の許す限り拡張することが可能です。"
984
985 # Checked-By: Ryuunosuke Ayanokouzi;
986 msgid "The partitioning tool configures LVM in several steps. First you must create on the existing disks the partitions that will be “physical volumes for LVM”. To activate LVM, you need to choose “Configure the Logical Volume Manager (LVM)”, then on the same configuration screen “Create a volume group”, to which you will associate the existing physical volumes. Finally, you can create logical volumes within this volume group. Note that the automatic partitioning system can perform all these steps automatically."
987 msgstr "パーティショニングツールは数段階で LVM を設定します。最初に、存在するディスク上に「LVM の物理ボリューム」となるパーティションを作成しなければいけません。LVM を稼働させるには、「論理ボリュームマネージャの設定」を選び、同じ設定画面で「ボリュームグループの作成」から、存在する物理ボリュームを作成するボリュームグループに関連付けてください。最後に、このボリュームグループ内に論理ボリュームを作成してください。自動パーティショニングシステムを使えばこれらの全段階を自動的に実行できる点に注意してください。"
988
989 # Checked-By: Ryuunosuke Ayanokouzi;
990 msgid "In the partitioning menu, each physical volume will appear as a disk with a single partition which can not be deleted, but that you can use as desired."
991 msgstr "パーティショニングメニューでは、各物理ボリュームは削除できない単一のパーティションを持つディスクとして表示されますが、LVM 用として望み通り使うことが可能です。"
992
993 # Checked-By: Ryuunosuke Ayanokouzi;
994 msgid "The usage of LVM is described in further detail in <xref linkend=\"sect.lvm\" />."
995 msgstr "LVM の使い方については<xref linkend=\"sect.lvm\" />で詳しく説明されています。"
996
997 # Checked-By: Ryuunosuke Ayanokouzi;
998 msgid "Setting Up Encrypted Partitions"
999 msgstr "暗号化されたパーティションの設定"
1000
1001 # Checked-By: Ryuunosuke Ayanokouzi;
1002 msgid "<primary>LUKS</primary>"
1003 msgstr "<primary>LUKS</primary>"
1004
1005 # Checked-By: Ryuunosuke Ayanokouzi;
1006 msgid "<primary>dm-crypt</primary>"
1007 msgstr "<primary>dm-crypt</primary>"
1008
1009 # Checked-By: Ryuunosuke Ayanokouzi;
1010 msgid "<primary>partition</primary><secondary>encrypted</secondary>"
1011 msgstr "<primary>パーティション</primary><secondary sortas=\"アンゴウカ\">暗号化</secondary>"
1012
1013 # Checked-By: Ryuunosuke Ayanokouzi;
1014 msgid "<primary>partition encryption</primary>"
1015 msgstr "<primary sortas=\"アンゴウカ\">暗号化</primary><secondary>パーティション</secondary>"
1016
1017 # Checked-By: Ryuunosuke Ayanokouzi;
1018 msgid "<primary>confidentiality</primary><secondary>files</secondary>"
1019 msgstr "<primary sortas=\"キミツ\">機密</primary><secondary>ファイル</secondary>"
1020
1021 # Checked-By: Ryuunosuke Ayanokouzi;
1022 msgid "<primary>file</primary><secondary>confidentiality</secondary>"
1023 msgstr "<primary>ファイル</primary><secondary sortas=\"キミツセイ\">機密性</secondary>"
1024
1025 # Checked-By: Ryuunosuke Ayanokouzi;
1026 msgid "To guarantee the confidentiality of your data, for instance in the event of the loss or theft of your computer or a hard drive, it is possible to encrypt the data on some partitions. This feature can be added underneath any filesystem, since, as for LVM, Linux (and more particularly the dm-crypt driver) uses the Device Mapper to create a virtual partition (whose content is protected) based on an underlying partition that will store the data in an encrypted form (thanks to LUKS, Linux Unified Key Setup, a standard format that enables the storage of encrypted data as well as meta-information that indicates the encryption algorithms used)."
1027 msgstr "データの機密性を保証するには、たとえばコンピュータやハードドライブを紛失したり盗難された時に備えて、一部のパーティションのデータを暗号化しておく必要があります。暗号化の可否はファイルシステムの種類に依存しません。なぜなら、Linux (より具体的に言えば dm-crypt ドライバ) は LVM と同様にデバイスマッパを使い、暗号化されたデータが保存されるパーティション上に仮想パーティション (この内容が保護されます) を作成するからです (LUKS、Linux Unified Key Setup、のおかげで標準的なフォーマットが定められ、暗号化されたデータおよび使われている暗号化アルゴリズムを表すメタ情報の保存が可能になりました)。"
1028
1029 # Checked-By: Ryuunosuke Ayanokouzi;
1030 msgid "<emphasis>SECURITY</emphasis> Encrypted swap partition"
1031 msgstr "<emphasis>SECURITY</emphasis> 暗号化されたスワップパーティション"
1032
1033 # Checked-By: Ryuunosuke Ayanokouzi;
1034 #, fuzzy
1035 #| msgid "<primary>partition</primary><secondary>encrypted</secondary>"
1036 msgid "<primary>swap</primary><secondary>encrypted</secondary>"
1037 msgstr "<primary>パーティション</primary><secondary sortas=\"アンゴウカ\">暗号化</secondary>"
1038
1039 # Checked-By: Ryuunosuke Ayanokouzi;
1040 #, fuzzy
1041 #| msgid "When an encrypted partition is used, the encryption key is stored in memory (RAM). Since retrieving this key allows the decryption of the data, it is of utmost importance to avoid leaving a copy of this key that would be accessible to the possible thief of the computer or hard drive, or to a maintenance technician. This is however something that can easily occur with a laptop, since when hibernating the contents of RAM is stored on the swap partition. If this partition isn't encrypted, the thief may access the key and use it to decrypt the data from the encrypted partitions. This is why, when you use encrypted partitions, it is imperative to also encrypt the swap partition!"
1042 msgid "When an encrypted partition is used, the encryption key is stored in memory (RAM). Since retrieving this key allows the decryption of the data, it is of utmost importance to avoid leaving a copy of this key that would be accessible to the possible thief of the computer or hard drive, or to a maintenance technician. This is, however, something that can easily occur with a laptop, since when hibernating the contents of RAM is stored on the swap partition. If this partition isn't encrypted, the thief may access the key and use it to decrypt the data from the encrypted partitions. This is why, when you use encrypted partitions, it is imperative to also encrypt the swap partition!"
1043 msgstr "暗号化されたパーティションを使う場合、暗号化鍵はメモリ (RAM) の中に保存されています。暗号化鍵が入手できればデータの復号化が可能になりますから、コンピュータやハードドライブの泥棒もしくはメンテナンス技術者に暗号化鍵の複製を入手されないようにするには、暗号化鍵の複製を RAM に残さないようにすることが最も重要です。しかしながらラップトップでは RAM の中に暗号化鍵の複製を残すという状況が簡単に起こります。なぜなら、ハイバネーションの際に RAM の内容はスワップパーティションに保存されるからです。スワップパーティションが暗号化されていない場合、泥棒は暗号化鍵を入手して、暗号化されたパーティションのデータを復号化するかもしれません。このため、暗号化されたパーティションを使うなら、スワップパーティションの暗号化も欠かせません!"
1044
1045 # Checked-By: Ryuunosuke Ayanokouzi;
1046 msgid "The Debian installer will warn the user if they try to make an encrypted partition while the swap partition isn't encrypted."
1047 msgstr "Debian インストーラはスワップパーティションが暗号化されていないにも関わらず暗号化されたパーティションを作ろうとしたらユーザに警告します。"
1048
1049 # Checked-By: Ryuunosuke Ayanokouzi;
1050 # Tag: L-CFMD;
1051 msgid "To create an encrypted partition, you must first assign an available partition for this purpose. To do so, select a partition and indicate that it is to be used as a “physical volume for encryption”. After partitioning the disk containing the physical volume to be made, choose “Configure encrypted volumes”. The software will then propose to initialize the physical volume with random data (making the localization of the real data more difficult), and will ask you to enter an “encryption passphrase”, which you will have to enter every time you boot your computer in order to access the content of the encrypted partition. Once this step has been completed, and you have returned to the partitioning tool menu, a new partition will be available in an “encrypted volume”, which you can then configure just like any other partition. In most cases, this partition is used as a physical volume for LVM so as to protect several partitions (LVM logical volumes) with the same encryption key, including the swap partition (see sidebar <xref linkend=\"sidebar.encrypted-swap-partition\" />)."
1052 msgstr "暗号化されたパーティションを作成するには、最初にあるパーティションを暗号化用に割り当てなければいけません。割り当てを行うには、パーティションを選択し「暗号化の物理ボリューム」として使うように設定してください。物理ボリュームを含むディスクのパーティショニングの後、「暗号化されたボリュームの設定」を選んでください。パーティショニングツールは (真のデータの位置をより分かりにくくするために) 物理ボリュームをでたらめなデータで初期化することを提案し、「暗号化パスフレーズ」の入力を要求します。暗号化されたパーティションの内容にアクセスする場合、パスフレーズはコンピュータの起動時に毎回入力しなければいけません。この段階が完了しパーティショニングツールメニューまで戻ったら、「暗号化ボリューム」から新しいパーティションを利用できるはずです。「暗号化ボリューム」は他のパーティションと同様に設定できます。多くの場合、「暗号化ボリューム」は LVM の物理ボリュームとして利用されます。そうすれば、複数のパーティション (LVM 論理ボリューム) をスワップパーティションも含めて同じ暗号化鍵で保護することが可能になります (補注<xref linkend=\"sidebar.encrypted-swap-partition\" />を参照してください)。"
1053
1054 # Checked-By: Ryuunosuke Ayanokouzi;
1055 msgid "Installing the Base System"
1056 msgstr "基本システムのインストール"
1057
1058 # Checked-By: Ryuunosuke Ayanokouzi;
1059 msgid "<primary>system</primary><secondary>base</secondary>"
1060 msgstr "<primary>システム</primary><secondary sortas=\"キホンシステム\">基本システム</secondary>"
1061
1062 # Checked-By: Ryuunosuke Ayanokouzi;
1063 msgid "This step, which doesn't require any user interaction, installs the Debian “base system” packages. This includes the <command>dpkg</command> and <command>apt</command> tools, which manage Debian packages, as well as the utilities necessary to boot the system and start using it."
1064 msgstr "この段階ではユーザの入力は不要で、Debian の「基本システム」パッケージがインストールされます。基本システムには Debian パッケージを管理する <command>dpkg</command> と <command>apt</command> ツールだけでなく、システムを起動させてシステムを使うのに必要なユーティリティが含まれています。"
1065
1066 # Checked-By: Ryuunosuke Ayanokouzi;
1067 msgid "Installation of the base system"
1068 msgstr "基本システムのインストール"
1069
1070 # Checked-By: Ryuunosuke Ayanokouzi;
1071 msgid "Configuring the Package Manager (<command>apt</command>)"
1072 msgstr "パッケージマネージャ (<command>apt</command>) の設定"
1073
1074 # Checked-By: Ryuunosuke Ayanokouzi;
1075 msgid "<primary>configuration</primary><secondary>initial configuration of APT</secondary>"
1076 msgstr "<primary sortas=\"セッテイ\">設定</primary><secondary sortas=\"APT ノショキセッテイ\">APT の初期設定</secondary>"
1077
1078 # Checked-By: Ryuunosuke Ayanokouzi;
1079 msgid "<primary>APT</primary><secondary>initial configuration</secondary>"
1080 msgstr "<primary>APT</primary><secondary sortas=\"ショキセッテイ\">初期設定</secondary>"
1081
1082 # Checked-By: Ryuunosuke Ayanokouzi;
1083 #, fuzzy
1084 #| msgid "In order to be able to install additional software, APT needs to be configured and told where to find Debian packages. This step is as automated as possible. It starts with a question asking if it must use a network source for packages, or if it should only look for packages on the CD-ROM."
1085 msgid "In order to be able to install additional software, APT needs to be configured and told where to find Debian packages. This step is as automated as possible."
1086 msgstr "追加ソフトウェアをインストールできるようにするためには、APT を設定し、Debian パッケージを探す場所を決めなければいけません。この段階は可能な限り自動化されています。パッケージマネージャの設定はパッケージを探す場所をネットワークソースにするか CD-ROM だけにするかを尋ねる質問から始まります。"
1087
1088 # Checked-By: Ryuunosuke Ayanokouzi;
1089 msgid "<emphasis>NOTE</emphasis> Debian CD-ROM in the drive"
1090 msgstr "<emphasis>NOTE</emphasis> ドライブ中の Debian CD-ROM"
1091
1092 # Checked-By: Ryuunosuke Ayanokouzi;
1093 msgid "If the installer detects a Debian installation disk in the CD/DVD reader, it is not necessary to configure APT to go looking for packages on the network: APT is automatically configured to read packages from a removable media drive. If the disk is part of a set, the software will offer to “explore” other disks in order to reference all of the packages stored on them."
1094 msgstr "インストーラが CD/DVD ドライブに Debian のインストールディスクを検出した場合、ネットワーク上のパッケージを探しに行くように APT を設定する必要はありません。なぜなら APT はリムーバブルメディアドライブからパッケージを読むように自動的に設定されているからです。このディスクがインストールディスクセットの一部だった場合、インストーラは他のディスクに収められているすべてパッケージを参照するために他のディスクを「探索」することを提案するでしょう。"
1095
1096 # Checked-By: Ryuunosuke Ayanokouzi;
1097 #, fuzzy
1098 #| msgid "If getting packages from the network is requested, the next two questions allow to choose a server from which to download these packages, by choosing first a country, then a mirror available in that country (a mirror is a public server hosting copies of all the files of the Debian master archive)."
1099 msgid "If getting packages from the network is requested, the installer allows to choose a server from which to download these packages, by choosing first a country, then a mirror available in that country. A mirror is a public server hosting copies of all the files of the Debian master archive."
1100 msgstr "ネットワークからパッケージを取得することを選んだ場合、次の 2 つの質問で国とその国で利用できる Debian アーカイブミラーを選択し、パッケージをダウンロードするサーバを選びます (Debian アーカイブミラーとは Debian マスターアーカイブにあるファイルのコピーをホストしている公開サーバです)。"
1101
1102 # Checked-By: Ryuunosuke Ayanokouzi;
1103 msgid "Selecting a Debian mirror"
1104 msgstr "Debian アーカイブミラーの選択"
1105
1106 # Checked-By: Ryuunosuke Ayanokouzi;
1107 msgid "Finally, the program proposes to use an HTTP proxy. If there is no proxy, Internet access will be direct. If you type <literal>http://proxy.falcot.com:3128</literal>, APT will use the Falcot <foreignphrase>proxy/cache</foreignphrase>, a “Squid” program. You can find these settings by checking the configurations of a web browser on another machine connected to the same network."
1108 msgstr "最後にインストーラは HTTP プロキシを使うことを提案します。プロキシを入力しなかった場合、インターネットに直接アクセスします。ここで <literal>http://proxy.falcot.com:3128</literal> と入力した場合、APT は Falcot の<foreignphrase>プロキシ/キャッシュ</foreignphrase>である「Squid」プログラムを使うでしょう。プロキシの設定を見つけ出すには、同じネットワークに接続された別のマシンでウェブブラウザの設定を確認してみてください。"
1109
1110 # Checked-By: Ryuunosuke Ayanokouzi;
1111 msgid "The files <filename>Packages.xz</filename> and <filename>Sources.xz</filename> are then automatically downloaded to update the list of packages recognized by APT."
1112 msgstr "APT は <filename>Packages.xz</filename> と <filename>Sources.xz</filename> ファイルを自動的にダウンロードし、認識するパッケージのリストを更新します。"
1113
1114 # Checked-By: Ryuunosuke Ayanokouzi;
1115 msgid "<emphasis>BACK TO BASICS</emphasis> HTTP proxy"
1116 msgstr "<emphasis>BACK TO BASICS</emphasis> HTTP プロキシ"
1117
1118 # Checked-By: Ryuunosuke Ayanokouzi;
1119 msgid "<primary>proxy</primary>"
1120 msgstr "<primary>プロキシ</primary>"
1121
1122 # Checked-By: Ryuunosuke Ayanokouzi;
1123 msgid "<primary>proxy cache</primary>"
1124 msgstr "<primary>プロキシキャッシュ</primary>"
1125
1126 # Checked-By: Ryuunosuke Ayanokouzi;
1127 msgid "<primary>cache, proxy</primary>"
1128 msgstr "<primary>キャッシュ、プロキシ</primary>"
1129
1130 # Checked-By: Ryuunosuke Ayanokouzi;
1131 msgid "<primary>Squid</primary>"
1132 msgstr "<primary>Squid</primary>"
1133
1134 # Checked-By: Ryuunosuke Ayanokouzi;
1135 msgid "An HTTP proxy is a server that forwards an HTTP request for network users. It sometimes helps to speed up downloads by keeping a copy of files that have been transferred through it (we then speak of proxy/cache). In some cases, it is the only means of accessing an external web server; in such cases it is essential to answer the corresponding question during installation for the program to be able to download the Debian packages through it."
1136 msgstr "HTTP プロキシはネットワークユーザの HTTP 要求を転送するサーバです。プロキシは転送したファイルのコピーを保存することでダウンロードの高速化に寄与する場合があります (そのためこれはプロキシ/キャッシュと呼ばれます)。時として、プロキシは外部のウェブサーバにアクセスする唯一の手段である場合があります。そしてこのような場合、必ずインストール中のプロキシ関連の質問に答えてください。そうすれば、プログラムはプロキシを通じて Debian パッケージをダウンロードできるようになります。"
1137
1138 # Checked-By: Ryuunosuke Ayanokouzi;
1139 msgid "Squid is the name of the server software used by Falcot Corp to offer this service."
1140 msgstr "Squid は Falcot Corp がプロキシサービスを提供するために使っているサーバソフトウェアの名前です。"
1141
1142 # Checked-By: Ryuunosuke Ayanokouzi;
1143 msgid "Debian Package Popularity Contest"
1144 msgstr "Debian パッケージ人気コンテスト"
1145
1146 msgid "<primary><emphasis role=\"pkg\">popularity-contest</emphasis></primary>"
1147 msgstr ""
1148
1149 # Checked-By: Ryuunosuke Ayanokouzi;
1150 #, fuzzy
1151 #| msgid "<primary>choice</primary><secondary>of country</secondary>"
1152 msgid "<primary>package</primary><secondary>popularity</secondary>"
1153 msgstr "<primary sortas=\"センタク\">選択</primary><secondary sortas=\"クニノセンタク\">国の選択</secondary>"
1154
1155 # Checked-By: Ryuunosuke Ayanokouzi;
1156 msgid "The Debian system contains a package called <emphasis role=\"pkg\">popularity-contest</emphasis>, whose purpose is to compile package usage statistics. Each week, this program collects information on the packages installed and those used recently, and anonymously sends this information to the Debian project servers. The project can then use this information to determine the relative importance of each package, which influences the priority that will be granted to them. In particular, the most “popular” packages will be included in the installation CD-ROM, which will facilitate their access for users who do not wish to download them or to purchase a complete set."
1157 msgstr "Debian システムには <emphasis role=\"pkg\">popularity-contest</emphasis> と呼ばれるパッケージが含まれています。<emphasis role=\"pkg\">popularity-contest</emphasis> はパッケージの使用統計を収集するためのパッケージです。毎週、このプログラムはインストール済みパッケージと最近利用されたパッケージの情報を収集し、この情報を匿名で Debian プロジェクトのサーバに送信します。Debian プロジェクトはこの情報を基に各パッケージの相対的重要度を決定します。パッケージの相対的重要度はパッケージの優先度に影響をおよぼします。特に、インストールメディアの完全なセットをダウンロードまたは購入したくないというユーザの利便性を考慮して、インストール CD-ROM に収録されるパッケージは最も「人気」のパッケージだけに限られています。"
1158
1159 # Checked-By: Ryuunosuke Ayanokouzi;
1160 msgid "This package is only activated on demand, out of respect for the confidentiality of users' usage."
1161 msgstr "<emphasis role=\"pkg\">popularity-contest</emphasis> は、ユーザの利用法の機密性を配慮して、要求されない限りインストールされません。"
1162
1163 # Checked-By: Ryuunosuke Ayanokouzi;
1164 msgid "Selecting Packages for Installation"
1165 msgstr "インストールするパッケージの選択"
1166
1167 # Checked-By: Ryuunosuke Ayanokouzi;
1168 #, fuzzy
1169 #| msgid "The following step allows you to choose the purpose of the machine in very broad terms; the ten suggested tasks correspond to lists of packages to be installed. The list of the packages that will actually be installed will be fine-tuned and completed later on, but this provides a good starting point in a simple manner."
1170 msgid "The following step allows you to choose the purpose of the machine in very broad terms; the twelve suggested tasks correspond to lists of packages to be installed. The list of the packages that will actually be installed will be fine-tuned and completed later on, but this provides a good starting point in a simple manner."
1171 msgstr "以降の段階では、マシンの大ざっぱな用途を選択します。ここで提案されている 10 種類のタスクはインストールされるパッケージのリストに対応しています。後からインストール済みパッケージのリストを微調整したり仕上げる必要があるという点は変わりませんが、ここでタスクを選択して必要と思われるパッケージをインストールしておくことは後の作業の良い足掛かりとなります。"
1172
1173 msgid "This step can require a full set of installation media or an internet connection and a working mirror setup as described above."
1174 msgstr ""
1175
1176 # Checked-By: Ryuunosuke Ayanokouzi;
1177 # Tag: PTAL;
1178 msgid "Some packages are also automatically installed according to the hardware detected (thanks to the program <command>discover-pkginstall</command> from the <emphasis role=\"pkg\">discover</emphasis> package)."
1179 msgstr "一部のパッケージは、検出されたハードウェアに基づき、自動的にインストールされます (<emphasis role=\"pkg\">discover</emphasis> パッケージの <command>discover-pkginstall</command> プログラムがこれを担当します)。"
1180
1181 # Checked-By: Ryuunosuke Ayanokouzi;
1182 msgid "Task choices"
1183 msgstr "タスクの選択"
1184
1185 # Checked-By: Ryuunosuke Ayanokouzi;
1186 msgid "Installing the GRUB Bootloader"
1187 msgstr "GRUB ブートローダのインストール"
1188
1189 # Checked-By: Ryuunosuke Ayanokouzi;
1190 msgid "<primary>GRUB</primary>"
1191 msgstr "<primary>GRUB</primary>"
1192
1193 # Checked-By: Ryuunosuke Ayanokouzi;
1194 msgid "The bootloader is the first program started by the BIOS. This program loads the Linux kernel into memory and then executes it. It often offers a menu that allows the user to choose the kernel to load and/or the operating system to boot."
1195 msgstr "ブートローダは BIOS が起動する最初のプログラムです。ブートローダは Linux カーネルをメモリに読み込み、実行します。通常ブートローダはユーザに対して、読み込むカーネルまたは起動したいオペレーティングシステムを選択できるメニューを表示します。"
1196
1197 # Checked-By: Ryuunosuke Ayanokouzi;
1198 msgid "<emphasis>BEWARE</emphasis> Bootloader and dual boot"
1199 msgstr "<emphasis>BEWARE</emphasis> ブートローダとデュアルブート"
1200
1201 # Checked-By: Ryuunosuke Ayanokouzi;
1202 msgid "This phase in the Debian installation process detects the operating systems that are already installed on the computer, and automatically adds corresponding entries in the boot menu, but not all installation programs do this."
1203 msgstr "Debian インストール作業では、この段階でコンピュータに既にインストールされたオペレーティングシステムを検出し、関連するエントリをブートメニューに自動的に追加します。しかし、中にはこのような作業を行わないインストールプログラムもあります。"
1204
1205 # Checked-By: Ryuunosuke Ayanokouzi;
1206 #, fuzzy
1207 #| msgid "In particular, if you install (or reinstall) Windows thereafter, the bootloader will be erased. Debian will still be on the hard drive, but will no longer be accessible from the boot menu. You would then have to boot the Debian installation system in <userinput>rescue</userinput> mode to set up a less exclusive bootloader. This operation is described in detail in the installation manual. <ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch08s07.html\" />"
1208 msgid "In particular, if you install (or reinstall) Windows thereafter, the bootloader will be erased. Debian will still be on the hard drive, but will no longer be accessible from the boot menu (except for Windows 10, where it will still be accessible through the Windows recovery console). You would then have to boot the Debian installation system in <userinput>rescue</userinput> mode to set up a less exclusive bootloader. This operation is described in detail in the installation manual. <ulink type=\"block\" url=\"https://www.debian.org/releases/stable/amd64/ch08s06\" />"
1209 msgstr "特に、Debian のインストール後に Windows をインストール (または再インストール) する場合、Debian がインストールしたブートローダは消去されます。Debian はまだハードドライブに残っていますが、もはやブートメニューに表示されません。排他的でないブートローダをセットアップするには、Debian インストールシステムを <userinput>rescue</userinput> モードで起動してください。この操作はインストールマニュアルに詳しく書かれています。<ulink type=\"block\" url=\"http://www.debian.org/releases/stable/amd64/ch08s07.html\" />"
1210
1211 # Checked-By: Ryuunosuke Ayanokouzi;
1212 msgid "By default, the menu proposed by GRUB contains all the installed Linux kernels, as well as any other operating systems that were detected. This is why you should accept the offer to install it in the Master Boot Record. Since keeping older kernel versions preserves the ability to boot the same system if the most recently installed kernel is defective or poorly adapted to the hardware, it often makes sense to keep a few older kernel versions installed."
1213 msgstr "デフォルトでは、GRUB が表示したメニューにはすべてのインストールされたカーネルおよび検出された他のオペレーティングシステムが含まれています。このため、GRUB はマスターブートレコード内にインストールされるべきです。古いカーネルバージョンを残しておけば、最近インストールされたカーネルが欠陥品かハードウェアと相性が悪い場合にも同じシステムを起動できる状態が保存されます。このため、インストール済みの古いカーネルバージョンを保持しておくことは合理的な方法です。"
1214
1215 # Checked-By: Ryuunosuke Ayanokouzi;
1216 #, fuzzy
1217 #| msgid "<primary>BIOS</primary>"
1218 msgid "<primary>LILO</primary>"
1219 msgstr "<primary>BIOS</primary>"
1220
1221 # Checked-By: Ryuunosuke Ayanokouzi;
1222 #, fuzzy
1223 #| msgid "GRUB is the default bootloader installed by Debian thanks to its technical superiority: it works with most filesystems and therefore doesn't require an update after each installation of a new kernel, since it reads its configuration during boot and finds the exact position of the new kernel. Version 1 of GRUB (now known as “Grub Legacy”) couldn't handle all combinations of LVM and software RAID; version 2, installed by default, is more complete. There may still be situations where it is more recommendable to install LILO (another bootloader); the installer will suggest it automatically."
1224 msgid "GRUB is the default bootloader installed by Debian thanks to its technical superiority: it works with most filesystems and therefore doesn't require an update after each installation of a new kernel, since it reads its configuration during boot and finds the exact position of the new kernel. Version 1 of GRUB (now known as “Grub Legacy”) couldn't handle all combinations of LVM and software RAID; version 2, installed by default, is more complete. While there may still be situations where it is preferable to install LILO (another bootloader); the Debian installer does no longer support the installation of it."
1225 msgstr "GRUB はその技術的優位性のおかげで Debian がインストールするデフォルトのブートローダに採用されています。そして GRUB は多くのファイルシステムをサポートしているため、新しいカーネルのインストールの後に GRUB を毎回更新する必要がありません。なぜなら、GRUB は起動中に設定を読んで、新しいカーネルの正確な位置を見つけ出すからです。GRUB の バージョン 1 (現在は「Grub Legacy」として知られています) は LVM とソフトウェア RAID の組み合わせを取り扱うことができませんでした。しかし、デフォルトでインストールされるバージョン 2 はより完成度の高いものです。また、LILO (別のブートローダ) のインストールが推奨される状況もまだあるかもしれません。そのような場合、インストーラは自動的に LILO を提案します。"
1226
1227 msgid "It is worth noting that GRUB is not a single bootloader, it is more like a collection of bootloaders suited for different cases. The numerous binary packages built out of the GRUB source package reflect that: <emphasis role=\"pkg\">grub-efi-amd64</emphasis> is for 64-bit PC booting in UEFI mode, <emphasis role=\"pkg\">grub-efi-ia32</emphasis> is for 32-bit PC booting in UEFI mode, <emphasis role=\"pkg\">grub-pc</emphasis> is for PC booting in BIOS mode, <emphasis>grub-uboot</emphasis> for ARM computers, etc."
1228 msgstr ""
1229
1230 # Checked-By: Ryuunosuke Ayanokouzi;
1231 msgid "For more information on configuring GRUB, please refer to <xref linkend=\"sect.config-grub\" />."
1232 msgstr "GRUB の設定に関する詳しい情報は<xref linkend=\"sect.config-grub\" />を参照してください。"
1233
1234 # Checked-By: Ryuunosuke Ayanokouzi;
1235 #, fuzzy
1236 #| msgid "<emphasis>CULTURE</emphasis> Uses of partitioning"
1237 msgid "<emphasis>CULTURE</emphasis> Secure Boot and the shim bootloader"
1238 msgstr "<emphasis>CULTURE</emphasis> パーティショニング法"
1239
1240 # Checked-By: Ryuunosuke Ayanokouzi;
1241 #, fuzzy
1242 #| msgid "<primary>configuration</primary><secondary>network</secondary><tertiary>static</tertiary>"
1243 msgid "<primary>bootloader</primary><secondary>intermediary</secondary><tertiary>shim</tertiary>"
1244 msgstr "<primary sortas=\"セッテイ\">設定</primary><secondary>ネットワーク</secondary><tertiary sortas=\"セイテキ\">静的</tertiary>"
1245
1246 # Checked-By: Ryuunosuke Ayanokouzi;
1247 #, fuzzy
1248 #| msgid "<primary>swap</primary>"
1249 msgid "<primary>shim</primary>"
1250 msgstr "<primary>スワップ</primary>"
1251
1252 msgid "Secure Boot is a technology ensuring that you run only software validated by your operating system vendor. To accomplish its work each element of the boot sequences validates the next software component that it will execute. At the deepest level, the UEFI firmware embeds cryptographic keys provided by Microsoft to check the bootloader's signature, ensuring that it is safe to execute. Since getting a binary signed by Microsoft is a lengthy process, Debian decided to not sign GRUB directly. Instead it uses an intermediary bootloader called shim, which almost never needs to change, and whose only role is to check Debian's provided signature on GRUB and execute GRUB. To run Debian on a machine having Secure Boot enabled, the <emphasis role=\"pkg\">shim-signed</emphasis> package must be installed."
1253 msgstr ""
1254
1255 msgid "Down the stack, GRUB will do a similar check with the kernel, and then the kernel might also check signatures on modules that get loaded. The kernel might also forbid some operations that could alter the integrity of the system."
1256 msgstr ""
1257
1258 msgid "Debian 10 (Buster) was the first release supporting Secure Boot. Before, you had to disable that feature in the system setup screen offered by the BIOS or the UEFI."
1259 msgstr ""
1260
1261 # Checked-By: Ryuunosuke Ayanokouzi;
1262 msgid "Finishing the Installation and Rebooting"
1263 msgstr "インストールの完了と再起動"
1264
1265 # Checked-By: Ryuunosuke Ayanokouzi;
1266 msgid "The installation is now complete, the program invites you to remove the CD-ROM from the reader and to restart the computer."
1267 msgstr "これでインストールが完了しました。インストーラは、ドライブから CD-ROM を取り出し、コンピュータを再起動するよう促します。"
1268
1269 # Checked-By: Ryuunosuke Ayanokouzi;
1270 #, fuzzy
1271 #| msgid "Installation Methods"
1272 msgid "Installation complete"
1273 msgstr "インストール方法"
1274
1275 # Checked-By: Ryuunosuke Ayanokouzi;
1276 msgid "After the First Boot"
1277 msgstr "初回起動の後"
1278
1279 # Checked-By: Ryuunosuke Ayanokouzi;
1280 msgid "If you activated the task “Debian desktop environment” without any explicit desktop choice (or with the “GNOME” choice), the computer will display the <command>gdm3</command> login manager."
1281 msgstr "特定のデスクトップを選ばずに (または「GNOME」を選んで)「Debian デスクトップ環境」のタスクを有効化してインストールを進めていた場合、<command>gdm3</command> ログインマネージャが表示されます。"
1282
1283 # Checked-By: Ryuunosuke Ayanokouzi;
1284 msgid "First boot"
1285 msgstr "初回起動"
1286
1287 # Checked-By: Ryuunosuke Ayanokouzi;
1288 msgid "The user that has already been created can then log in and begin working immediately."
1289 msgstr "作成したユーザを使ってログインし、すぐに仕事を始められます。"
1290
1291 # Checked-By: Ryuunosuke Ayanokouzi;
1292 msgid "Installing Additional Software"
1293 msgstr "追加ソフトウェアのインストール"
1294
1295 # Checked-By: Ryuunosuke Ayanokouzi;
1296 #, fuzzy
1297 #| msgid "<primary><command>dselect</command></primary>"
1298 msgid "<primary><command>apt</command></primary>"
1299 msgstr "<primary><command>dselect</command></primary>"
1300
1301 # Checked-By: Ryuunosuke Ayanokouzi;
1302 #, fuzzy
1303 #| msgid "<primary><command>dselect</command></primary>"
1304 msgid "<primary><command>synaptic</command></primary>"
1305 msgstr "<primary><command>dselect</command></primary>"
1306
1307 # Checked-By: Ryuunosuke Ayanokouzi;
1308 msgid "The installed packages correspond to the profiles selected during installation, but not necessarily to the use that will actually be made of the machine. As such, you might want to use a package management tool to refine the selection of installed packages. The two most frequently used tools (which are installed if the “Debian desktop environment” profile was chosen) are <command>apt</command> (accessible from the command line) and <command>synaptic</command> (“Synaptic Package Manager” in the menus)."
1309 msgstr "インストールされているパッケージはシステムのインストール中に選択したタスクを基に選ばれたものですが、実際のマシンの用途には不要なパッケージがインストールされている場合もあります。このような場合、パッケージをインストールしたり削除するためにパッケージ管理ツールを使いたくなるかもしれません。最も頻繁に利用されるパッケージ管理ツール (「Debian デスクトップ環境」タスクを選んだ場合にインストールされます) は <command>apt</command> (コマンドラインから利用します) と <command>synaptic</command> (メニューの「Synaptic パッケージマネージャ」から利用します) の 2 種類です。"
1310
1311 # Checked-By: Ryuunosuke Ayanokouzi;
1312 msgid "To facilitate the installation of coherent groups of programs, Debian creates “tasks” that are dedicated to specific uses (mail server, file server, etc.). You already had the opportunity to select them during installation, and you can access them again thanks to package management tools such as <command>aptitude</command> (the tasks are listed in a distinct section) and <command>synaptic</command> (through the menu <menuchoice> <guimenu>Edit</guimenu> <guimenuitem>Mark Packages by Task…</guimenuitem> </menuchoice>)."
1313 msgstr "一連のプログラムグループのインストールを楽にするために、Debian はシステムに特定の (メールサーバ、ファイルサーバなどの) 機能を持たせる際に必要な作業をまとめた「タスク」を作りました。「タスク」を選択する機会はインストール中にもありましたし、パッケージ管理ツールである <command>aptitude</command> (タスクは専用のセクション内にリストされています) および <command>synaptic</command> (<menuchoice> <guimenu>編集(E)</guimenu> <guimenuitem>タスクを利用してパッケージにマークする(T)…</guimenuitem> </menuchoice>とメニューを進みます) からもタスクにアクセスすることが可能です。"
1314
1315 # Checked-By: Ryuunosuke Ayanokouzi;
1316 #, fuzzy
1317 #| msgid "<primary><command>dselect</command></primary>"
1318 msgid "<primary><command>aptitude</command></primary>"
1319 msgstr "<primary><command>dselect</command></primary>"
1320
1321 # Checked-By: Ryuunosuke Ayanokouzi;
1322 msgid "Aptitude is an interface to APT in full-screen text mode. It allows the user to browse the list of available packages according to various categories (installed or not-installed packages, by task, by section, etc.), and to view all of the information available on each of them (dependencies, conflicts, description, etc.). Each package can be marked “install” (to be installed, <keycap>+</keycap> key) or “remove” (to be removed, <keycap>-</keycap> key). All of these operations will be conducted simultaneously once you've confirmed them by pressing the <keycap>g</keycap> key (“g” for “go!”). If you have forgotten some programs, no worries; you will be able to run <command>aptitude</command> again once the initial installation has been completed."
1323 msgstr "aptitude は全画面のテキストモードで動く APT へのインターフェースです。aptitude を使えば、利用できるパッケージをさまざまな状態 (インストール済み、未インストールのパッケージ、タスク、セクションなど) ごとに分類したリストを閲覧したり、各パッケージに対して利用できるすべての情報 (依存パッケージ、衝突パッケージ、パッケージ説明文など) を確認できます。また、各パッケージに対して一時的に「インストール」や「削除」マークを付け、後からその操作を実行させることが可能です (インストールは <keycap>+</keycap> キー、削除は <keycap>-</keycap> キーでマークします)。マークした操作は、<keycap>g</keycap> キー (「go!」の「g」) を押して確認したら、一斉に実行されます。インストールし忘れたパッケージがあっても心配ありません。この場合、最初のインストールが完了したら、もう一度 <command>aptitude</command> を実行すればよいのです。"
1324
1325 # Checked-By: Ryuunosuke Ayanokouzi;
1326 msgid "<emphasis>TIP</emphasis> Debian thinks of speakers of non-English languages"
1327 msgstr "<emphasis>TIP</emphasis> Debian は非英語言語話者に配慮しています"
1328
1329 # Checked-By: Ryuunosuke Ayanokouzi;
1330 msgid "Several tasks are dedicated to the localization of the system in other languages beyond English. They include translated documentation, dictionaries, and various other packages useful for speakers of different languages. The appropriate task is automatically selected if a non-English language was chosen during installation."
1331 msgstr "いくつかのタスクはシステムを英語以外の言語向けに地域化するためのタスクです。これらのタスクには、翻訳された文書、辞書、異なる言語の話者に有益なさまざまな他のパッケージが含まれています。インストール中に非英語言語を選択した場合には、適切なタスクが自動的に選択されます。"
1332
1333 # Checked-By: Ryuunosuke Ayanokouzi;
1334 #, fuzzy
1335 #| msgid "Of course, it is possible not to select any task to be installed. In this case, you can manually install the desired software with the <command>apt</command> or <command>aptitude</command> command (which are both accessible from the command line)."
1336 msgid "Of course, it is possible not to select any task to be installed. In this case, you can manually install the desired software with the <command>apt</command> or <command>aptitude</command> command (which are both accessible from the command line). The packages can be found using the <command>apt-cache search task <replaceable>keyword</replaceable></command> command."
1337 msgstr "もちろん、すべてのタスクを選択しないことも可能です。その場合、<command>apt</command> や <command>aptitude</command> コマンド (両方ともコマンドラインから利用できます) を使って必要なソフトウェアを手作業でインストールします。"
1338
1339 # Checked-By: Ryuunosuke Ayanokouzi;
1340 msgid "<emphasis>VOCABULARY</emphasis> Package dependencies, conflicts"
1341 msgstr "<emphasis>VOCABULARY</emphasis> パッケージの依存関係と衝突"
1342
1343 # Checked-By: Ryuunosuke Ayanokouzi;
1344 msgid "In the Debian packaging lingo, a “dependency” is another package necessary for the proper functioning of the package in question. Conversely, a “conflict” is a package that can not be installed side-by-side with another."
1345 msgstr "Debian パッケージング用語で「依存」は対象のパッケージが適切に動作するために必要な他のパッケージを意味しています。逆に、「衝突」は対象のパッケージと共存してインストールできない他のパッケージを意味しています。"
1346
1347 # Checked-By: Ryuunosuke Ayanokouzi;
1348 msgid "These concepts are discussed in greater detail in <xref linkend=\"packaging-system\" />."
1349 msgstr "これらの概念は<xref linkend=\"packaging-system\" />で詳しく議論されています。"
1350
1351 # Checked-By: Ryuunosuke Ayanokouzi;
1352 msgid "Upgrading the System"
1353 msgstr "システムのアップグレード"
1354
1355 # Checked-By: Ryuunosuke Ayanokouzi;
1356 msgid "<primary>safe-upgrade</primary>"
1357 msgstr "<primary>safe-upgrade</primary>"
1358
1359 # Checked-By: Ryuunosuke Ayanokouzi;
1360 msgid "A first <command>apt upgrade</command> (a command used to automatically update installed programs) is generally required, especially for possible security updates issued since the release of the latest Debian stable version. These updates may involve some additional questions through <command>debconf</command>, the standard Debian configuration tool. For further information on these updates conducted by <command>apt</command>, please refer to <xref linkend=\"sect.apt-upgrade\" />."
1361 msgstr "一般的に言えば、最初に <command>apt upgrade</command> (インストールされたプログラムを自動的に更新するコマンド) を実行することをお勧めします。特に最新の Debian 安定版バージョンのリリース以降に発表されたセキュリティ更新を適用しなければいけません。更新の際に、標準的な Debian 設定ツールである <command>debconf</command> を使って追加的な質問をされるかもしれません。<command>apt</command> を使った更新に関する詳しい情報は、<xref linkend=\"sect.apt-upgrade\" />を参照してください。"
1362
1363 # Checked-By: Ryuunosuke Ayanokouzi;
1364 #~ msgid "<emphasis>BACK TO BASICS</emphasis> BIOS, the hardware/software interface"
1365 #~ msgstr "<emphasis>BACK TO BASICS</emphasis> BIOS、ハードウェアとソフトウェアのインターフェース"
1366
1367 # Checked-By: Ryuunosuke Ayanokouzi;
1368 #~ msgid "<primary>Basic Input/Output System</primary>"
1369 #~ msgstr "<primary>Basic Input/Output System</primary>"
1370
1371 # Checked-By: Ryuunosuke Ayanokouzi;
1372 #~ msgid "BIOS (which stands for Basic Input/Output System) is a software that is included in the motherboard (the electronic board connecting all peripherals) and executed when the computer is booted, in order to load an operating system (via an adapted bootloader). It stays in the background to provide an interface between the hardware and the software (in our case, the Linux kernel)."
1373 #~ msgstr "BIOS (Basic Input/Output System の略) はマザーボード (すべての周辺装置を接続する電子回路ボード) に組み込まれたソフトウェアで、オペレーティングシステムを読み込むために (適合するブートローダ経由で) コンピュータの起動時に実行されます。BIOS はバックグラウンドでハードウェアとソフトウェア (今回の場合 Linux カーネル) 間のインターフェースを提供します。"
1374
1375 # Checked-By: Ryuunosuke Ayanokouzi;
1376 #~ msgid "<primary>swap partition</primary>"
1377 #~ msgstr "<primary>スワップパーティション</primary>"
1378
1379 # Checked-By: Ryuunosuke Ayanokouzi;
1380 #~ msgid "<primary>LVM</primary><secondary>during installation</secondary>"
1381 #~ msgstr "<primary>LVM</primary><secondary sortas=\"インストールチュウニオコナウ LVM ノセッテイ\">インストール中に行う LVM の設定</secondary>"
1382
1383 # Checked-By: Ryuunosuke Ayanokouzi;
1384 #~ msgid "<primary>aptitude</primary>"
1385 #~ msgstr "<primary>aptitude</primary>"
1386
1387 # Checked-By: Ryuunosuke Ayanokouzi;
1388 #~ msgid "<emphasis>BEWARE</emphasis> Bootloaders and architectures"
1389 #~ msgstr "<emphasis>BEWARE</emphasis> ブートローダとアーキテクチャ"
1390
1391 # Checked-By: Ryuunosuke Ayanokouzi;
1392 #~ msgid "LILO and GRUB, which are mentioned in this chapter, are bootloaders for <emphasis>i386</emphasis> and <emphasis>amd64</emphasis> architectures. If you install Debian on another architecture, you will need to use another bootloader. Among others, we can cite <command>yaboot</command> or <command>quik</command> for <emphasis>powerpc</emphasis>, <command>silo</command> for <emphasis>sparc</emphasis>, <command>aboot</command> for <emphasis>alpha</emphasis>, <command>arcboot</command> for <emphasis>mips</emphasis>."
1393 #~ msgstr "この章で紹介した LILO と GRUB は <emphasis>i386</emphasis> と <emphasis>amd64</emphasis> アーキテクチャ用のブートローダです。もし別のアーキテクチャに Debian をインストールするなら、別のブートローダが必要です。とりわけ、<emphasis>powerpc</emphasis> 用には <command>yaboot</command> または <command>quik</command>、<emphasis>sparc</emphasis> 用には <command>silo</command>、<emphasis>alpha</emphasis> 用には <command>aboot</command>、<emphasis>mips</emphasis> 用には <command>arcboot</command> が用意されています。"
1394
1395 # Checked-By: Ryuunosuke Ayanokouzi;
1396 #~ msgid "<emphasis>CULTURE</emphasis> <command>dselect</command>, the old interface to install packages"
1397 #~ msgstr "<emphasis>CULTURE</emphasis> <command>dselect</command>、パッケージをインストールする古いインターフェース"
1398
1399 # Checked-By: Ryuunosuke Ayanokouzi;
1400 #~ msgid "Before <command>aptitude</command>, the standard program to select packages to be installed was <command>dselect</command>, the old graphical interface associated with <command>dpkg</command>. Being a difficult program for beginners to use, it is not recommended."
1401 #~ msgstr "<command>aptitude</command> 以前、インストールするパッケージを選択するための標準的なプログラムは <command>dselect</command> で、<command>dselect</command> は <command>dpkg</command> に対する古いグラフィカルインターフェースでした。<command>dselect</command> は初心者には使い難いプログラムなので、推奨しません。"
1402
1403 #~ msgid "Debian also used to provide a <emphasis>businesscard</emphasis> or <emphasis>bizcard</emphasis> CD-ROM, which only contained the installer, and which required all the Debian packages (including the base system) to be downloaded. Since its image only took up 35 MB, it was meant to be burnt on a “business card” type CD-ROM. This CD-ROM is no longer provided for Wheezy: the debian-installer developers estimated that the work required to maintain that image was no longer worth it. Furthermore, the <filename>mini.iso</filename> image that they already provide as by-product of the installer is very similar."
1404 #~ msgstr "以前 Debian は <emphasis>businesscard</emphasis> または <emphasis>bizcard</emphasis> CD-ROM を提供していました。これにはインストーラだけが含まれており、(基本システムを含めて) すべての Debian パッケージのダウンロードが必要です。これのサイズは高々 35 MB だったので、「名刺」型 CD-ROM に書き込むことができました。この CD-ROM の Wheezy 版はもはや提供されていません。なぜなら debian-installer の開発者は、もはやこのイメージのメンテナンスに必要な作業には価値がないと判断したからです。加えて、インストーラの副産物として既に提供されていた <filename>mini.iso</filename> イメージはこれとよく似ていました。"
1405
1406 #~ msgid "<primary>CD-ROM</primary><secondary><emphasis>businesscard CD-ROM</emphasis></secondary>"
1407 #~ msgstr "<primary>CD-ROM</primary><secondary sortas=\"メイシガタ CD-ROM\"><emphasis>名刺型 CD-ROM</emphasis></secondary>"
1408
1409 #~ msgid "<primary>DVD-ROM</primary><secondary><emphasis>businesscard DVD-ROM</emphasis></secondary>"
1410 #~ msgstr "<primary>DVD-ROM</primary><secondary sortas=\"メイシガタ DVD-ROM\"><emphasis>名刺型 DVD-ROM</emphasis></secondary>"
1411
1412 #~ msgid "Since recent computers are able to boot from USB devices, you can also install Debian from a USB key (this is nothing more than a small flash-memory disk). Be aware, however, that not all BIOSes are the same; some are able to boot from USB 2.0 devices, while others only work with USB 1.1. Besides, the USB key must have 512-bytes sectors, and this feature, while common, is never documented on the packaging of the keys you find for sale."
1413 #~ msgstr "最近のコンピュータは USB デバイスから起動できるため、USB メモリ (これは単なるフラッシュメモリディスクに過ぎません) から Debian をインストールすることも可能です。しかし、すべての BIOS が同じではないという点に注意してください。それどころか BIOS によっては USB 2.0 デバイスからでも起動できるものもあれば、USB 1.1 デバイスからしか起動できないものもあります。加えて、インストールに使う USB メモリのセクタサイズは 512 バイトでなければいけません。この点についてパッケージで言及している USB メモリはめったに販売されていません。"