Debian Codegraph @

doc/man/po4a/po/ro.po

raw
1 # Romanian translation of debconf package.
2 # Mesajele în limba română pentru manualul pachetului „debconf”.
3 # Copyright © 2024 Free Software Foundation, Inc.
4 # This file is distributed under the same license as the debconf package.
5 #
6 # Remus-Gabriel Chelu <[email protected]>, ian-2025.
7 #
8 msgid ""
9 msgstr ""
10 "Project-Id-Version: debconf 1.5.87\n"
11 "POT-Creation-Date: 2024-01-21 19:23+0000\n"
12 "PO-Revision-Date: 2025-01-06 09:22+0100\n"
13 "Last-Translator: Remus-Gabriel Chelu <[email protected]>\n"
14 "Language-Team: Romanian <[email protected]>\n"
15 "Language: ro\n"
16 "MIME-Version: 1.0\n"
17 "Content-Type: text/plain; charset=UTF-8\n"
18 "Content-Transfer-Encoding: 8bit\n"
19 "X-Generator: Poedit 3.5\n"
20
21 #. type: SH
22 #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3
23 #: ../../debconf-apt-progress:3 ../../debconf-escape:3
24 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3
25 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3
26 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3
27 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3
28 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2
29 #, no-wrap
30 msgid "NAME"
31 msgstr "NUME"
32
33 #. type: textblock
34 #: ../../debconf:5
35 msgid "debconf - run a debconf-using program"
36 msgstr "debconf - rulează un program care utilizează debconf"
37
38 #. type: SH
39 #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7
40 #: ../../debconf-apt-progress:7 ../../debconf-escape:7
41 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16
42 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14
43 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7
44 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7
45 #: debconf.conf.5:12 confmodule.3:4
46 #, no-wrap
47 msgid "SYNOPSIS"
48 msgstr "SINOPSIS"
49
50 #. type: verbatim
51 #: ../../debconf:11
52 #, no-wrap
53 msgid ""
54 " debconf [options] command [args]\n"
55 "\n"
56 msgstr ""
57 " debconf [opțiuni] comandă [argumente]\n"
58 "\n"
59
60 #. type: SH
61 #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20
62 #: ../../debconf-apt-progress:15 ../../debconf-escape:12
63 #: ../../debconf-communicate:13 ../../debconf-copydb:30
64 #: ../../debconf-getlang:21 ../../debconf-get-selections:11
65 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21
66 #: ../../debconf-set-selections:12 ../../debconf-show:13
67 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4
68 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4
69 #, no-wrap
70 msgid "DESCRIPTION"
71 msgstr "DESCRIERE"
72
73 #. type: textblock
74 #: ../../debconf:15
75 msgid ""
76 "Debconf is a configuration system for Debian packages. For a debconf "
77 "overview and documentation for sysadmins, see L<debconf(7)> (in the debconf-"
78 "doc package)."
79 msgstr ""
80 "Debconf este un sistem de configurare pentru pachetele Debian. Pentru o "
81 "prezentare generală a debconf și documentație pentru administratorii de "
82 "sistem, consultați L<debconf(7)> (în pachetul debconf-doc)."
83
84 #. type: textblock
85 #: ../../debconf:19
86 msgid ""
87 "The B<debconf> program runs a program under debconf's control, setting it up "
88 "to talk with debconf on stdio. The program's output is expected to be "
89 "debconf protocol commands, and it is expected to read result codes on stdin. "
90 "See L<debconf-devel(7)> for details about the debconf protocol."
91 msgstr ""
92 "Programul B<debconf> rulează un program sub controlul debconf, configurându-"
93 "l pentru a comunica cu debconf prin intermediul intrării standard. Se "
94 "așteaptă ca ieșirea programului să fie comenzile protocolului debconf și se "
95 "așteaptă ca acesta să citească codurile de rezultate la intrarea standard. "
96 "Consultați L<debconf-devel(7)> pentru detalii despre protocolul debconf."
97
98 #. type: textblock
99 #: ../../debconf:24
100 msgid ""
101 "The command to be run under debconf must be specified in a way that will let "
102 "your PATH find it."
103 msgstr ""
104 "Comanda care urmează să fie executată sub debconf trebuie specificată într-"
105 "un mod care va permite variabilei de mediu $PATH să o găsească."
106
107 #. type: textblock
108 #: ../../debconf:27
109 msgid ""
110 "This command is not the usual way that debconf is used. It's more typical "
111 "for debconf to be used via L<dpkg-preconfigure(8)> or L<dpkg-reconfigure(8)>."
112 msgstr ""
113 "Această comandă nu este modul obișnuit în care este utilizat debconf. Este "
114 "mai tipic ca debconf să fie utilizat prin L<dpkg-preconfigure(8)> sau L<dpkg-"
115 "reconfigure(8)>."
116
117 #. type: =head1
118 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36
119 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56
120 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21
121 msgid "OPTIONS"
122 msgstr "OPȚIUNI"
123
124 #. type: =item
125 #: ../../debconf:34
126 msgid "B<-o>I<package>, B<--owner=>I<package>"
127 msgstr "B<-o>I<pachet>, B<--owner=>I<pachet>"
128
129 #. type: textblock
130 #: ../../debconf:36
131 msgid ""
132 "Tell debconf what package the command it is running is a part of. This is "
133 "necessary to get ownership of registered questions right, and to support "
134 "unregister and purge commands properly."
135 msgstr ""
136 "Îi indică lui debconf din ce pachet face parte comanda pe care o execută. "
137 "Acest lucru este necesar pentru a obține proprietarul corect al întrebărilor "
138 "înregistrate și pentru a gestiona corect comenzile de ștergere a "
139 "înregistrărilor «unregister» și de purjare «purge»."
140
141 #. type: =item
142 #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25
143 msgid "B<-f>I<type>, B<--frontend=>I<type>"
144 msgstr "B<-f>I<tip>, B<--frontend=>I<tip>"
145
146 #. type: textblock
147 #: ../../debconf:42 ../../dpkg-preconfigure:26
148 msgid "Select the frontend to use."
149 msgstr "Selectează interfața care urmează să fie utilizată."
150
151 #. type: =item
152 #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36
153 msgid "B<-p>I<value>, B<--priority=>I<value>"
154 msgstr "B<-p>I<valoare>, B<--priority=>I<valoare>"
155
156 #. type: textblock
157 #: ../../debconf:46
158 msgid "Specify the minimum priority of question that will be displayed."
159 msgstr "Specifică prioritatea minimă a întrebării care va fi afișată."
160
161 #. type: =item
162 #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42
163 msgid "B<--terse>"
164 msgstr "B<--terse>"
165
166 #. type: textblock
167 #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44
168 msgid "Enables terse output mode. This affects only some frontends."
169 msgstr ""
170 "Activează modul de ieșire laconic. Acest lucru afectează doar unele "
171 "interfețe."
172
173 #. type: =head1
174 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75
175 #: ../../debconf-set-selections:47
176 msgid "EXAMPLES"
177 msgstr "EXEMPLE"
178
179 #. type: textblock
180 #: ../../debconf:56
181 msgid "To debug a shell script that uses debconf, you might use:"
182 msgstr ""
183 "Pentru depanarea unui script shell care utilizează debconf, puteți utiliza:"
184
185 #. type: verbatim
186 #: ../../debconf:58
187 #, no-wrap
188 msgid ""
189 " DEBCONF_DEBUG=developer debconf my-shell-prog\n"
190 "\n"
191 msgstr ""
192 " DEBCONF_DEBUG=developer debconf scriptul-meu-shell\n"
193 "\n"
194
195 #. type: textblock
196 #: ../../debconf:60
197 msgid "Or, you might use this:"
198 msgstr "Sau, puteți utiliza această comandă:"
199
200 #. type: verbatim
201 #: ../../debconf:62
202 #, no-wrap
203 msgid ""
204 " debconf --frontend=readline sh -x my-shell-prog\n"
205 "\n"
206 msgstr ""
207 " debconf --frontend=readline sh -x scriptul-meu-shell\n"
208 "\n"
209
210 #. type: SH
211 #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154
212 #: ../../debconf-escape:21 ../../debconf-communicate:39
213 #: ../../debconf-copydb:102 ../../debconf-getlang:74
214 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61
215 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59
216 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376
217 #: debconf-devel.7:958
218 #, no-wrap
219 msgid "SEE ALSO"
220 msgstr "CONSULTAȚI ȘI"
221
222 #. type: textblock
223 #: ../../debconf:66
224 msgid "L<debconf-devel(7)>, L<debconf(7)>"
225 msgstr "L<debconf-devel(7)>, L<debconf(7)>"
226
227 #. type: SH
228 #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159
229 #: ../../debconf-escape:72 ../../debconf-communicate:74
230 #: ../../debconf-copydb:175 ../../debconf-getlang:256
231 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48
232 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226
233 #: ../../debconf-show:152 ../../dpkg-preconfigure:258
234 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382
235 #: debconf-devel.7:968
236 #, no-wrap
237 msgid "AUTHOR"
238 msgstr "AUTOR"
239
240 #. type: textblock
241 #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161
242 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76
243 #: ../../debconf-copydb:177 ../../debconf-getlang:258
244 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183
245 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311
246 msgid "Joey Hess <[email protected]>"
247 msgstr "Joey Hess <[email protected]>"
248
249 #. type: textblock
250 #: ../../Debconf/Client/ConfModule.pm:5
251 msgid "Debconf::Client::ConfModule - client module for ConfModules"
252 msgstr "Debconf::Client::ConfModule - modul client pentru ConfModules"
253
254 #. type: verbatim
255 #: ../../Debconf/Client/ConfModule.pm:9
256 #, no-wrap
257 msgid ""
258 " use Debconf::Client::ConfModule ':all';\n"
259 " version('2.0');\n"
260 " my $capb=capb('backup');\n"
261 " input(\"medium\", \"foo/bar\");\n"
262 " my @ret=go();\n"
263 " if ($ret[0] == 30) {\n"
264 " \t# Back button pressed.\n"
265 " \t...\n"
266 " }\n"
267 " ...\n"
268 "\n"
269 msgstr ""
270 " use Debconf::Client::ConfModule ':all';\n"
271 " version('2.0');\n"
272 " my $capb=capb('backup');\n"
273 " input(\"medium\", \"foo/bar\");\n"
274 " my @ret=go();\n"
275 " if ($ret[0] == 30) {\n"
276 " \t# Butonul «Înapoi» apăsat.\n"
277 " \t...\n"
278 " }\n"
279 " ...\n"
280 "\n"
281
282 #. type: textblock
283 #: ../../Debconf/Client/ConfModule.pm:22
284 msgid ""
285 "This is a module to ease writing ConfModules for Debian's configuration "
286 "management system. It can communicate with a FrontEnd via the debconf "
287 "protocol (which is documented in full in the debconf_specification in Debian "
288 "policy)."
289 msgstr ""
290 "Acesta este un modul pentru a ușura scrierea de ConfModules pentru sistemul "
291 "de gestionare a configurației Debian. Poate comunica cu o interfață "
292 "(FrontEnd) prin protocolul debconf (care este documentat în întregime în "
293 "debconf_specification din politica Debian)."
294
295 #. type: textblock
296 #: ../../Debconf/Client/ConfModule.pm:27
297 msgid ""
298 "The design is that each command in the protocol is represented by one "
299 "function in this module (with the name lower-cased). Call the function and "
300 "pass in any parameters you want to follow the command. If the function is "
301 "called in scalar context, it will return any textual return code. If it is "
302 "called in list context, an array consisting of the numeric return code and "
303 "the textual return code will be returned."
304 msgstr ""
305 "Fiecare comandă din protocol este reprezentată de o funcție în acest modul "
306 "(cu numele scris cu litere mici). Apelați funcția și treceți orice parametri "
307 "doriți să urmeze comanda. Dacă funcția este apelată în context scalar, "
308 "aceasta va returna orice cod de returnare textual. Dacă este apelată în "
309 "context de listă, va fi returnată o matrice formată din codul de returnare "
310 "numeric și codul de returnare textual."
311
312 #. type: textblock
313 #: ../../Debconf/Client/ConfModule.pm:34
314 msgid ""
315 "This module uses Exporter to export all functions it defines. To import "
316 "everything, simply import \":all\"."
317 msgstr ""
318 "Acest modul utilizează Exporter pentru a exporta toate funcțiile pe care le "
319 "definește. Pentru a importa totul, importați pur și simplu „:all”."
320
321 #. type: =item
322 #: ../../Debconf/Client/ConfModule.pm:62
323 msgid "import"
324 msgstr "import"
325
326 #. type: textblock
327 #: ../../Debconf/Client/ConfModule.pm:64
328 msgid ""
329 "Ensure that a FrontEnd is running. It's a little hackish. If "
330 "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, "
331 "one is started up automatically and stdin and out are connected to it. Note "
332 "that this function is always run when the module is loaded in the usual way."
333 msgstr ""
334 "Se asigură că o interfață (FrontEnd) rulează. Este un pic mai complicat. "
335 "Dacă variabila DEBIAN_HAS_FRONTEND este definită, se presupune că o "
336 "interfață rulează. Dacă nu, una este pornită automat și intrarea și ieșirea "
337 "standard sunt conectate la aceasta. Rețineți că această funcție este "
338 "întotdeauna executată atunci când modulul este încărcat în mod obișnuit."
339
340 #. type: =item
341 #: ../../Debconf/Client/ConfModule.pm:95
342 msgid "stop"
343 msgstr "stop"
344
345 #. type: textblock
346 #: ../../Debconf/Client/ConfModule.pm:97
347 msgid ""
348 "The frontend doesn't send a return code here, so we cannot try to read it or "
349 "we'll block."
350 msgstr ""
351 "Interfața nu trimite un cod de returnare aici, deci nu putem încerca să îl "
352 "citim sau ne vom bloca."
353
354 #. type: =item
355 #: ../../Debconf/Client/ConfModule.pm:107
356 msgid "AUTOLOAD"
357 msgstr "AUTOLOAD"
358
359 #. type: textblock
360 #: ../../Debconf/Client/ConfModule.pm:109
361 msgid "Creates handler functions for commands on the fly."
362 msgstr "Creează din mers funcții de gestionare pentru comenzi."
363
364 #. type: textblock
365 #: ../../Debconf/Client/ConfModule.pm:156
366 msgid ""
367 "The debconf specification (/usr/share/doc/debian-policy/"
368 "debconf_specification.txt.gz)."
369 msgstr ""
370 "Specificația debconf (/usr/share/doc/debian-policy/"
371 "debconf_specification.txt.gz)."
372
373 #. type: textblock
374 #: ../../debconf-apt-progress:5
375 msgid ""
376 "debconf-apt-progress - install packages using debconf to display a progress "
377 "bar"
378 msgstr ""
379 "debconf-apt-progress - instalează pachete folosind debconf pentru a afișa o "
380 "bară de progres"
381
382 #. type: verbatim
383 #: ../../debconf-apt-progress:9
384 #, no-wrap
385 msgid ""
386 " debconf-apt-progress [--] command [args ...]\n"
387 " debconf-apt-progress --config\n"
388 " debconf-apt-progress --start\n"
389 " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n"
390 " debconf-apt-progress --stop\n"
391 "\n"
392 msgstr ""
393 " debconf-apt-progress [--] comanda [argumente ...]\n"
394 " debconf-apt-progress --config\n"
395 " debconf-apt-progress --start\n"
396 " debconf-apt-progress --from waypoint --to waypoint [--] comanda [argumente ...]\n"
397 " debconf-apt-progress --stop\n"
398 "\n"
399
400 #. type: textblock
401 #: ../../debconf-apt-progress:17
402 msgid ""
403 "B<debconf-apt-progress> installs packages using debconf to display a "
404 "progress bar. The given I<command> should be any command-line apt frontend; "
405 "specifically, it must send progress information to the file descriptor "
406 "selected by the C<APT::Status-Fd> configuration option, and must keep the "
407 "file descriptors nominated by the C<APT::Keep-Fds> configuration option open "
408 "when invoking debconf (directly or indirectly), as those file descriptors "
409 "will be used for the debconf passthrough protocol."
410 msgstr ""
411 "B<debconf-apt-progress> instalează pachete utilizând debconf pentru a afișa "
412 "o bară de progres. I<comanda> dată ar trebui să fie orice interfață apt din "
413 "linia de comandă; în special, trebuie să trimită informații despre progres "
414 "către descriptorul de fișier selectat de opțiunea de configurare "
415 "C<APT::Status-Fd> și trebuie să mențină deschise descriptoarele de fișier "
416 "nominalizate de opțiunea de configurare C<APT::Keep-Fds> atunci când se "
417 "apelează debconf (direct sau indirect), deoarece acele descriptoare de "
418 "fișier vor fi utilizate pentru protocolul „passthrough” (de trecere la) "
419 "debconf."
420
421 #. type: textblock
422 #: ../../debconf-apt-progress:25
423 msgid ""
424 "The arguments to the command you supply should generally include B<-y> (for "
425 "B<apt-get> or B<aptitude>) or similar to avoid the apt frontend prompting "
426 "for input. B<debconf-apt-progress> cannot do this itself because the "
427 "appropriate argument may differ between apt frontends."
428 msgstr ""
429 "Argumentele comenzii pe care o furnizați ar trebui să includă, în general, "
430 "B<-y> (pentru B<apt-get> sau B<aptitude>) sau ceva similar pentru a evita ca "
431 "interfața apt să solicite informații. B<debconf-apt-progress> nu poate face "
432 "acest lucru deoarece argumentul adecvat poate diferi de la o interfață apt "
433 "la alta."
434
435 #. type: textblock
436 #: ../../debconf-apt-progress:30
437 msgid ""
438 "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to "
439 "create a progress bar with multiple segments for different stages of "
440 "installation, provided that the caller is a debconf confmodule. The caller "
441 "may also interact with the progress bar itself using the debconf protocol if "
442 "it so desires."
443 msgstr ""
444 "Opțiunile B<--start>, B<--stop>, B<--from> și B<--to> pot fi utilizate "
445 "pentru a crea o bară de progres cu mai multe segmente pentru diferite etape "
446 "de instalare, cu condiția ca apelantul să fie un modul de configurare "
447 "„confmodule” debconf. Apelantul poate, de asemenea, să interacționeze cu "
448 "bara de progres în sine utilizând protocolul debconf, dacă dorește acest "
449 "lucru."
450
451 #. type: textblock
452 #: ../../debconf-apt-progress:36
453 msgid ""
454 "debconf locks its config database when it starts up, which makes it "
455 "unfortunately inconvenient to have one instance of debconf displaying the "
456 "progress bar and another passing through questions from packages being "
457 "installed. If you're using a multiple-segment progress bar, you'll need to "
458 "eval the output of the B<--config> option before starting the debconf "
459 "frontend to work around this. See L<the EXAMPLES section/EXAMPLES> below."
460 msgstr ""
461 "debconf își blochează baza de date de configurare atunci când pornește, ceea "
462 "ce face ca, din păcate, să nu fie convenabil ca o instanță a debconf să "
463 "afișeze bara de progres și o alta să transmită întrebări de la pachetele în "
464 "curs de instalare. Dacă utilizați o bară de progres cu mai multe segmente, "
465 "va trebui să evaluați rezultatul opțiunii B<--config> înainte de a porni "
466 "interfața debconf pentru a rezolva această problemă. Consultați L<EXEMPLELE "
467 "din secțiunea EXEMPLE> de mai jos."
468
469 #. type: =item
470 #: ../../debconf-apt-progress:47
471 msgid "B<--config>"
472 msgstr "B<--config>"
473
474 #. type: textblock
475 #: ../../debconf-apt-progress:49
476 msgid ""
477 "Print environment variables necessary to start up a progress bar frontend."
478 msgstr ""
479 "Afișează variabilele de mediu necesare pentru a porni o interfață cu bara de "
480 "progres."
481
482 #. type: =item
483 #: ../../debconf-apt-progress:51
484 msgid "B<--start>"
485 msgstr "B<--start>"
486
487 #. type: textblock
488 #: ../../debconf-apt-progress:53
489 msgid ""
490 "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and "
491 "B<--to> to use other endpoints."
492 msgstr ""
493 "Pornește o bară de progres, care rulează implicit de la 0 la 100. Utilizați "
494 "B<--from> și B<--to> pentru a utiliza alte puncte finale."
495
496 #. type: =item
497 #: ../../debconf-apt-progress:56
498 msgid "B<--from> I<waypoint>"
499 msgstr "B<--from> I<punct-de-reper>"
500
501 #. type: textblock
502 #: ../../debconf-apt-progress:58
503 msgid ""
504 "If used with B<--start>, make the progress bar begin at I<waypoint> rather "
505 "than 0."
506 msgstr ""
507 "Dacă este utilizată cu B<--start>, bara de progres începe la I<punct-de-"
508 "reper> în loc de 0."
509
510 #. type: textblock
511 #: ../../debconf-apt-progress:61
512 msgid ""
513 "Otherwise, install packages with their progress bar beginning at this "
514 "\"waypoint\". Must be used with B<--to>."
515 msgstr ""
516 "În caz contrar, instalează pachetele cu bara lor de progres începând de la "
517 "acest „punct de reper”. Trebuie să fie utilizată cu B<--to>."
518
519 #. type: =item
520 #: ../../debconf-apt-progress:64
521 msgid "B<--to> I<waypoint>"
522 msgstr "B<--to> I<punct-de-reper>"
523
524 #. type: textblock
525 #: ../../debconf-apt-progress:66
526 msgid ""
527 "If used with B<--start>, make the progress bar end at I<waypoint> rather "
528 "than 100."
529 msgstr ""
530 "Dacă este utilizată cu B<--start>, bara de progres se termină la I<punct-de-"
531 "reper> în loc de 100."
532
533 #. type: textblock
534 #: ../../debconf-apt-progress:69
535 msgid ""
536 "Otherwise, install packages with their progress bar ending at this "
537 "\"waypoint\". Must be used with B<--from>."
538 msgstr ""
539 "În caz contrar, instalează pachetele a căror bară de progres se termină la "
540 "acest „punct-de-reper”. Trebuie să fie utilizată împreună cu B<--from>."
541
542 #. type: =item
543 #: ../../debconf-apt-progress:72
544 msgid "B<--stop>"
545 msgstr "B<--stop>"
546
547 #. type: textblock
548 #: ../../debconf-apt-progress:74
549 msgid "Stop a running progress bar."
550 msgstr "Oprește o bară de progres care rulează."
551
552 #. type: =item
553 #: ../../debconf-apt-progress:76
554 msgid "B<--no-progress>"
555 msgstr "B<--no-progress>"
556
557 #. type: textblock
558 #: ../../debconf-apt-progress:78
559 msgid ""
560 "Avoid starting, stopping, or stepping the progress bar. Progress messages "
561 "from apt, media change events, and debconf questions will still be passed "
562 "through to debconf."
563 msgstr ""
564 "Evită pornirea, oprirea sau parcurgerea pas cu pas a barei de progres. "
565 "Mesajele de progres de la apt, evenimentele de schimbare a suportului media "
566 "și întrebările debconf vor fi transmise în continuare către debconf."
567
568 #. type: =item
569 #: ../../debconf-apt-progress:82
570 msgid "B<--dlwaypoint> I<percentage>"
571 msgstr "B<--dlwaypoint> I<procent>"
572
573 #. type: textblock
574 #: ../../debconf-apt-progress:84
575 msgid ""
576 "Specify what percent of the progress bar to use for downloading packages. "
577 "The remainder will be used for installing packages. The default is to use "
578 "15% for downloading and the remaining 85% for installing."
579 msgstr ""
580 "Specifică ce procent din bara de progres să fie utilizat pentru descărcarea "
581 "pachetelor. Restul va fi utilizat pentru instalarea pachetelor. Valoarea "
582 "implicită este de a utiliza 15% pentru descărcare și restul de 85% pentru "
583 "instalare."
584
585 #. type: =item
586 #: ../../debconf-apt-progress:88
587 msgid "B<--logfile> I<file>"
588 msgstr "B<--logfile > I<fișier>"
589
590 #. type: textblock
591 #: ../../debconf-apt-progress:90
592 msgid "Send the normal output from apt to the given file."
593 msgstr "Trimite ieșirea normală de la apt către fișierul dat."
594
595 #. type: =item
596 #: ../../debconf-apt-progress:92
597 msgid "B<--logstderr>"
598 msgstr "B<--logstderr>"
599
600 #. type: textblock
601 #: ../../debconf-apt-progress:94
602 msgid ""
603 "Send the normal output from apt to stderr. If you supply neither B<--"
604 "logfile> nor B<--logstderr>, the normal output from apt will be discarded."
605 msgstr ""
606 "Trimite ieșirea normală de la apt la ieșirea de eroare standard. Dacă nu "
607 "furnizați nici B<--logfile>, nici B<--logstderr>, ieșirea normală de la apt "
608 "va fi eliminată."
609
610 #. type: =item
611 #: ../../debconf-apt-progress:98
612 msgid "B<-->"
613 msgstr "B<-->"
614
615 #. type: textblock
616 #: ../../debconf-apt-progress:100
617 msgid ""
618 "Terminate options. Since you will normally need to give at least the B<-y> "
619 "argument to the command being run, you will usually need to use B<--> to "
620 "prevent that being interpreted as an option to B<debconf-apt-progress> "
621 "itself."
622 msgstr ""
623 "Semnalează terminarea opțiunilor. Deoarece în mod normal va trebui să "
624 "oferiți cel puțin argumentul B<-y> comenzii care se execută, de obicei va "
625 "trebui să utilizați B<--> pentru a preveni interpretarea acestuia ca opțiune "
626 "pentru B<debconf-apt-progress>."
627
628 #. type: textblock
629 #: ../../debconf-apt-progress:109
630 msgid ""
631 "Install the GNOME desktop and an X window system development environment "
632 "within a progress bar:"
633 msgstr ""
634 "Instalați biroul GNOME și un mediu de dezvoltare cu sistemul de ferestre X "
635 "în cadrul unei bare de progres:"
636
637 #. type: verbatim
638 #: ../../debconf-apt-progress:112
639 #, no-wrap
640 msgid ""
641 " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
642 "\n"
643 msgstr ""
644 " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
645 "\n"
646
647 #. type: textblock
648 #: ../../debconf-apt-progress:114
649 msgid ""
650 "Install the GNOME, KDE, and XFCE desktops within a single progress bar, "
651 "allocating 45% of the progress bar for each of GNOME and KDE and the "
652 "remaining 10% for XFCE:"
653 msgstr ""
654 "Instalați birourile GNOME, KDE și XFCE în cadrul unei singure bare de "
655 "progres, alocând 45% din bara de progres pentru GNOME, alte 45% pentru KDE "
656 "și restul de 10% pentru XFCE:"
657
658 #. type: verbatim
659 #: ../../debconf-apt-progress:118
660 #, no-wrap
661 msgid ""
662 " #! /bin/sh\n"
663 " set -e\n"
664 " case $1 in\n"
665 " '')\n"
666 " eval \"$(debconf-apt-progress --config)\"\n"
667 " \"$0\" debconf\n"
668 " ;;\n"
669 " debconf)\n"
670 " . /usr/share/debconf/confmodule\n"
671 " debconf-apt-progress --start\n"
672 " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
673 " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
674 " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
675 " debconf-apt-progress --stop\n"
676 " ;;\n"
677 " esac\n"
678 "\n"
679 msgstr ""
680 " #! /bin/sh\n"
681 " set -e\n"
682 " case $1 in\n"
683 " '')\n"
684 " eval \"$(debconf-apt-progress --config)\"\n"
685 " \"$0\" debconf\n"
686 " ;;\n"
687 " debconf)\n"
688 " . /usr/share/debconf/confmodule\n"
689 " debconf-apt-progress --start\n"
690 " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
691 " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
692 " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
693 " debconf-apt-progress --stop\n"
694 " ;;\n"
695 " esac\n"
696 "\n"
697
698 #. type: =head1
699 #: ../../debconf-apt-progress:135
700 msgid "RETURN CODE"
701 msgstr "COD DE RETURNARE"
702
703 #. type: textblock
704 #: ../../debconf-apt-progress:137
705 msgid ""
706 "The exit code of the specified command is returned, unless the user hit the "
707 "cancel button on the progress bar. If the cancel button was hit, a value of "
708 "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 "
709 "will be returned."
710 msgstr ""
711 "Este returnat codul de ieșire al comenzii specificate, cu excepția cazului "
712 "în care utilizatorul a apăsat butonul de anulare de la bara de progres. Dacă "
713 "butonul de anulare a fost apăsat, se returnează o valoare de 30. Pentru a "
714 "evita ambiguitatea, dacă comanda a returnat 30, se va returna o valoare de 3."
715
716 #. type: =head1
717 #: ../../debconf-apt-progress:654
718 msgid "AUTHORS"
719 msgstr "AUTORI"
720
721 #. type: textblock
722 #: ../../debconf-apt-progress:656 ../../debconf-escape:74
723 msgid "Colin Watson <[email protected]>"
724 msgstr "Colin Watson <[email protected]>"
725
726 #. type: textblock
727 #: ../../debconf-escape:5
728 msgid "debconf-escape - helper when working with debconf's escape capability"
729 msgstr "debconf-escape - ajutor în lucrul cu capacitatea de eludare a debconf"
730
731 #. type: verbatim
732 #: ../../debconf-escape:9
733 #, no-wrap
734 msgid ""
735 " debconf-escape -e < unescaped-text\n"
736 " debconf-escape -u < escaped-text\n"
737 "\n"
738 msgstr ""
739 " debconf-escape -e < text-neeludat\n"
740 " debconf-escape -u < text-eludat\n"
741 "\n"
742
743 #. type: textblock
744 #: ../../debconf-escape:14
745 msgid ""
746 "When debconf has the 'escape' capability set, it will expect commands you "
747 "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> "
748 "respectively) and will in turn escape backslashes and newlines in its "
749 "replies. This can be used, for example, to substitute multi-line strings "
750 "into templates, or to get multi-line extended descriptions reliably using "
751 "C<METAGET>."
752 msgstr ""
753 "Când debconf are activată funcția „escape” (eludare), se va aștepta ca acele "
754 "comenzi pe care i le trimiteți să aibă bare oblice și linii noi eludate (ca "
755 "C<\\\\> și respectiv C<\\n>) și, la rândul său, va eluda barele oblice și "
756 "liniile noi în răspunsurile sale. Acest lucru poate fi utilizat, de exemplu, "
757 "pentru a înlocui șiruri cu mai multe linii în șabloane sau pentru a obține "
758 "descrieri extinse cu mai multe linii în mod fiabil utilizând C<METAGET>."
759
760 #. type: textblock
761 #: ../../debconf-escape:23
762 msgid "L<debconf-devel(7)> (available in the debconf-doc package)"
763 msgstr "L<debconf-devel(7)> (disponibil în pachetul „debconf-doc”)"
764
765 #. type: textblock
766 #: ../../debconf-communicate:5
767 msgid "debconf-communicate - communicate with debconf"
768 msgstr "debconf-communicate - comunicare cu debconf"
769
770 #. type: verbatim
771 #: ../../debconf-communicate:11
772 #, no-wrap
773 msgid ""
774 " echo commands | debconf-communicate [options] [package]\n"
775 "\n"
776 msgstr ""
777 " echo comenzi | debconf-communicate [opțiuni] [pachet]\n"
778 "\n"
779
780 #. type: textblock
781 #: ../../debconf-communicate:15
782 msgid ""
783 "B<debconf-communicate> allows you to communicate with debconf on the fly, "
784 "from the command line. The package argument is the name of the package which "
785 "you are pretending to be as you communicate with debconf, and it may be "
786 "omitted if you are lazy. It reads commands in the form used by the debconf "
787 "protocol from stdin. For documentation on the available commands and their "
788 "usage, see the debconf specification."
789 msgstr ""
790 "B<debconf-communicate> vă permite să comunicați cu debconf din mers, din "
791 "linia de comandă. Argumentul „pachet” este numele pachetului în care "
792 "pretindeți că sunteți în timp ce comunicați cu debconf și poate fi omis dacă "
793 "sunteți leneș. Acesta citește comenzile în forma utilizată de protocolul "
794 "debconf de la intrarea standard. Pentru documentație privind comenzile "
795 "disponibile și utilizarea lor, consultați specificațiile debconf."
796
797 #. type: textblock
798 #: ../../debconf-communicate:22
799 msgid ""
800 "The commands are executed in sequence. The textual return code of each is "
801 "printed out to standard output."
802 msgstr ""
803 "Comenzile sunt executate în succesiune. Codul de returnare textual al "
804 "fiecăreia este imprimat la ieșirea standard."
805
806 #. type: textblock
807 #: ../../debconf-communicate:25
808 msgid ""
809 "The return value of this program is the numeric return code of the last "
810 "executed command."
811 msgstr ""
812 "Valoarea de returnare a acestui program este codul numeric de returnare al "
813 "ultimei comenzi executate."
814
815 #. type: SH
816 #: ../../debconf-communicate:28 debconf.conf.5:444
817 #, no-wrap
818 msgid "EXAMPLE"
819 msgstr "EXEMPLU"
820
821 #. type: verbatim
822 #: ../../debconf-communicate:30
823 #, no-wrap
824 msgid ""
825 " echo get debconf/frontend | debconf-communicate\n"
826 "\n"
827 msgstr ""
828 " echo get debconf/frontend | debconf-communicate\n"
829 "\n"
830
831 #. type: textblock
832 #: ../../debconf-communicate:32
833 msgid "Print out the value of the debconf/frontend question."
834 msgstr "Afișează valoarea întrebării din interfața-debconf (debconf/fronted)."
835
836 #. type: =head1
837 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25
838 #: ../../debconf-set-selections:20
839 msgid "WARNING"
840 msgstr "AVERTISMENT"
841
842 #. type: textblock
843 #: ../../debconf-communicate:36
844 msgid ""
845 "This program should never be used from a maintainer script of a package that "
846 "uses debconf! It may however, be useful in debugging."
847 msgstr ""
848 "Acest program nu ar trebui să fie utilizat niciodată dintr-un script de "
849 "menținere a unui pachet care utilizează debconf! Cu toate acestea, poate fi "
850 "util în depanare."
851
852 #. type: textblock
853 #: ../../debconf-communicate:41
854 msgid "L<debconf-loadtemplate(1)>"
855 msgstr "L<debconf-loadtemplate(1)>"
856
857 #. type: textblock
858 #: ../../debconf-copydb:5
859 msgid "debconf-copydb - copy a debconf database"
860 msgstr "debconf-copydb - copiază o bază de date debconf"
861
862 #. type: verbatim
863 #: ../../debconf-copydb:19
864 #, no-wrap
865 msgid ""
866 " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n"
867 "\n"
868 msgstr ""
869 " debconf-copydb BD-sursă BD-destinație [--pattern=model] [--owner-pattern=model] [--config=Foo:bar]\n"
870 "\n"
871
872 #. type: textblock
873 #: ../../debconf-copydb:32
874 msgid ""
875 "B<debconf-copydb> copies items from an existing debconf database into "
876 "another, possibly new database. The two databases may have different "
877 "formats; if so a conversion will automatically be done."
878 msgstr ""
879 "B<debconf-copydb> copiază elemente dintr-o bază de date debconf existentă "
880 "într-o altă bază de date, posibil nouă. Cele două baze de date pot avea "
881 "formate diferite; în acest caz, se va face automat o conversie."
882
883 #. type: =item
884 #: ../../debconf-copydb:40
885 msgid "I<sourcedb>"
886 msgstr "I<BD-sursă>"
887
888 #. type: textblock
889 #: ../../debconf-copydb:42
890 msgid ""
891 "The name of the source database. Typically it will be defined in your "
892 "debconf.conf (or .debconfrc) file."
893 msgstr ""
894 "Numele bazei de date sursă. De obicei, acesta va fi definit în fișierul "
895 "debconf.conf (sau .debconfrc)."
896
897 #. type: =item
898 #: ../../debconf-copydb:45
899 msgid "I<destdb>"
900 msgstr "I<BD-destinație>"
901
902 #. type: textblock
903 #: ../../debconf-copydb:47
904 msgid ""
905 "The name of the destination database. It may be defined in debconf.conf "
906 "or .debconfrc, or you might define it on the command line (see below)."
907 msgstr ""
908 "Numele bazei de date de destinație. Acesta poate fi definit în debconf.conf "
909 "sau .debconfrc, sau îl puteți defini în linia de comandă (a se vedea mai "
910 "jos)."
911
912 #. type: =item
913 #: ../../debconf-copydb:51
914 msgid "B<-p> I<pattern>, B<--pattern> I<pattern>"
915 msgstr "B<-p> I<model>, B<--pattern> I<model>"
916
917 #. type: textblock
918 #: ../../debconf-copydb:53
919 msgid ""
920 "If this is specified, only items in I<sourcedb> whose names match the "
921 "pattern will be copied."
922 msgstr ""
923 "Dacă acesta este specificat, vor fi copiate numai elementele din I<BD-sursă> "
924 "ale căror nume corespund modelului."
925
926 #. type: =item
927 #: ../../debconf-copydb:56
928 msgid "B<--owner-pattern> I<pattern>"
929 msgstr "B<--owner-pattern> I<model>"
930
931 #. type: textblock
932 #: ../../debconf-copydb:58
933 msgid ""
934 "If this is specified, only items in I<sourcedb> whose owners match the "
935 "pattern will be copied."
936 msgstr ""
937 "Dacă acesta este specificat, vor fi copiate numai elementele din I<BD-sursă> "
938 "ai căror proprietari corespund modelului."
939
940 #. type: =item
941 #: ../../debconf-copydb:61
942 msgid "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
943 msgstr "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
944
945 #. type: textblock
946 #: ../../debconf-copydb:63
947 msgid "Set option Foo to bar. This is similar to writing:"
948 msgstr ""
949 "Stabilește opțiunea „Foo” la „bar”. Acest lucru este similar cu scrierea:"
950
951 #. type: verbatim
952 #: ../../debconf-copydb:65
953 #, no-wrap
954 msgid ""
955 " Foo: bar\n"
956 "\n"
957 msgstr ""
958 " Foo: bar\n"
959 "\n"
960
961 #. type: textblock
962 #: ../../debconf-copydb:67
963 msgid ""
964 "In debconf.conf, except you probably want to leave off the space on the "
965 "command line (or quote it: \"Foo: bar\"). Generally must be used multiple "
966 "times, to build up a full configuration stanza. While blank lines are used "
967 "to separate stanzas in debconf.conf, this program will assume that "
968 "\"Name:dbname\" denotes the beginning of a new stanza."
969 msgstr ""
970 "În debconf.conf, cu excepția faptului că probabil doriți să omiteți spațiul "
971 "din linia de comandă (sau să-l puneți între ghilimele duble: \"Foo: bar\"). "
972 "În general, trebuie utilizată de mai multe ori, pentru a construi o strofă "
973 "de configurare completă. În timp ce liniile goale sunt utilizate pentru a "
974 "separa strofele în debconf.conf, acest program va presupune că „Name:numeBD” "
975 "reprezintă începutul unei noi strofe."
976
977 #. type: verbatim
978 #: ../../debconf-copydb:77
979 #, no-wrap
980 msgid ""
981 " debconf-copydb configdb backup\n"
982 "\n"
983 msgstr ""
984 " debconf-copydb configdb copie_de_rezervă-BD\n"
985 "\n"
986
987 #. type: textblock
988 #: ../../debconf-copydb:79
989 msgid ""
990 "Copy all of configdb to backup, assuming you already have the backup "
991 "database defined in debconf.conf."
992 msgstr ""
993 "Copiază toată baza de date „configdb” în copie_de_rezervă-BD, presupunând că "
994 "aveți deja baza de date de copie_de_rezervă-BD definită în debconf.conf."
995
996 #. type: verbatim
997 #: ../../debconf-copydb:82
998 #, no-wrap
999 msgid ""
1000 " debconf-copydb configdb newdb --pattern='^slrn/' \\\n"
1001 " \t--config=Name:newdb --config=Driver:File \\\n"
1002 "\t--config=Filename:newdb.dat\n"
1003 "\n"
1004 msgstr ""
1005 " debconf-copydb configdb BD-nouă --pattern='^slrn/' \\\n"
1006 " \t--config=Name:BD-nouă --config=Driver:File \\\n"
1007 "\t--config=Filename:BD-nouă.dat\n"
1008 "\n"
1009
1010 #. type: textblock
1011 #: ../../debconf-copydb:86
1012 msgid ""
1013 "Copy slrn's data out of configdb, and into newdb. newdb is not defined in "
1014 "the rc file, so the --config switches set up the database on the fly."
1015 msgstr ""
1016 "Copiază datele slrn din baza de date „configdb” în BD-nouă. BD-nouă nu este "
1017 "definită în fișierul rc, astfel încât opțiunea „--config” stabilește baza de "
1018 "date din mers."
1019
1020 #. type: verbatim
1021 #: ../../debconf-copydb:89
1022 #, no-wrap
1023 msgid ""
1024 " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
1025 " \t-c InFd:none --pattern='^foo/'\n"
1026 "\n"
1027 msgstr ""
1028 " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
1029 " \t-c InFd:none --pattern='^foo/'\n"
1030 "\n"
1031
1032 #. type: textblock
1033 #: ../../debconf-copydb:92
1034 msgid "Spit out all the items in the debconf database related to package foo."
1035 msgstr ""
1036 "Scoate toate elementele din baza de date debconf referitoare la pachetul foo."
1037
1038 #. type: verbatim
1039 #: ../../debconf-copydb:94
1040 #, no-wrap
1041 msgid ""
1042 " debconf-copydb configdb pipe --config=Name:pipe \\\n"
1043 " --config=Driver:Pipe --config=InFd:none | \\\n"
1044 " \tssh remotehost debconf-copydb pipe configdb \\\n"
1045 "\t\t--config=Name:pipe --config=Driver:Pipe\n"
1046 "\n"
1047 msgstr ""
1048 " debconf-copydb configdb pipe --config=Name:pipe \\\n"
1049 " --config=Driver:Pipe --config=InFd:none | \\\n"
1050 " \tssh gazdă_la_distanță debconf-copydb pipe configdb \\\n"
1051 "\t\t--config=Name:pipe --config=Driver:Pipe\n"
1052 "\n"
1053
1054 #. type: textblock
1055 #: ../../debconf-copydb:99
1056 msgid ""
1057 "This uses the special purpose pipe driver to copy a database to a remote "
1058 "system."
1059 msgstr ""
1060 "Aceasta utilizează sistemul de control (driver) special pentru acest scop, "
1061 "„pipe”, pentru a copia o bază de date pe un sistem la distanță."
1062
1063 #. type: textblock
1064 #: ../../debconf-copydb:104
1065 msgid "L<debconf.conf(5)>"
1066 msgstr "L<debconf.conf(5)>"
1067
1068 #. type: textblock
1069 #: ../../debconf-getlang:5
1070 msgid "debconf-getlang - extract a language from a templates file"
1071 msgstr "debconf-getlang - extrage o limbă dintr-un fișier șablon"
1072
1073 #. type: verbatim
1074 #: ../../debconf-getlang:18
1075 #, no-wrap
1076 msgid ""
1077 " debconf-getlang lang master [translation]\n"
1078 " debconf-getlang --stats master translation [...]\n"
1079 "\n"
1080 msgstr ""
1081 " debconf-getlang limba fișier-principal [traducerea]\n"
1082 " debconf-getlang --stats fișier-principal traducerea [...]\n"
1083 "\n"
1084
1085 #. type: textblock
1086 #: ../../debconf-getlang:23
1087 msgid ""
1088 "Note: This utility is deprecated; you should switch to using the po-debconf "
1089 "package."
1090 msgstr ""
1091 "Notă: Acest instrument este depreciat; ar trebui să treceți la utilizarea "
1092 "pachetului po-debconf."
1093
1094 #. type: textblock
1095 #: ../../debconf-getlang:25
1096 msgid ""
1097 "This program helps make and manage translations of debconf templates. There "
1098 "are basically three situations in which this program might be called:"
1099 msgstr ""
1100 "Acest program ajută la realizarea și gestionarea traducerilor șabloanelor "
1101 "debconf. Există în principiu trei situații în care acest program ar putea fi "
1102 "apelat:"
1103
1104 #. type: =item
1105 #: ../../debconf-getlang:30
1106 msgid "A translation is just being started."
1107 msgstr "O traducere tocmai a fost începută."
1108
1109 #. type: textblock
1110 #: ../../debconf-getlang:32
1111 msgid ""
1112 "You want to provide the translator with a file they can work on that has the "
1113 "English fields from your templates file, plus blank Field-ll fields for the "
1114 "target language that they can fill in."
1115 msgstr ""
1116 "Doriți să furnizați traducătorului un fișier pe care să poată lucra și care "
1117 "conține câmpurile în limba engleză (msgid) din fișierul dvs. de șabloane, "
1118 "plus câmpuri secundare (msgstr) goale pentru limba țintă pe care le poate "
1119 "completa."
1120
1121 #. type: textblock
1122 #: ../../debconf-getlang:36
1123 msgid ""
1124 "To do this, run the program with first parameter being the code for the "
1125 "language that is being translated to, and the second parameter being the "
1126 "filename of the English templates file."
1127 msgstr ""
1128 "Pentru a face acest lucru, rulați programul cu primul parametru fiind codul "
1129 "pentru limba în care este tradus, iar al doilea parametru fiind numele "
1130 "fișierului de șabloane în limba engleză."
1131
1132 #. type: =item
1133 #: ../../debconf-getlang:40
1134 msgid "A translation is well under way."
1135 msgstr "O traducere este în plină desfășurare."
1136
1137 #. type: textblock
1138 #: ../../debconf-getlang:42
1139 msgid ""
1140 "You have changed some English text, or added more items to your templates "
1141 "file, and you want to send the translators a file with the English text plus "
1142 "their current translations (or you are the translator, and you want to "
1143 "generate such a file for your own use)."
1144 msgstr ""
1145 "Ați modificat o parte din textul în limba engleză sau ați adăugat mai multe "
1146 "elemente la fișierul dvs. de șabloane și doriți să trimiteți traducătorilor "
1147 "un fișier cu textul în limba engleză plus traducerile lor actuale (sau "
1148 "sunteți traducătorul și doriți să generați un astfel de fișier pentru uz "
1149 "propriu)."
1150
1151 #. type: textblock
1152 #: ../../debconf-getlang:47
1153 msgid ""
1154 "To accomplish this, run the program with the first parameter being the the "
1155 "code for the language that is being translated to, the second parameter "
1156 "being the filename of the master English templates file, and the third "
1157 "parameter being the filename of the current translated file."
1158 msgstr ""
1159 "Pentru a realiza acest lucru, rulați programul cu primul parametru fiind "
1160 "codul pentru limba în care este tradus, al doilea parametru fiind numele "
1161 "fișierului principal al șabloanelor în limba engleză, iar al treilea "
1162 "parametru fiind numele fișierului tradus curent."
1163
1164 #. type: textblock
1165 #: ../../debconf-getlang:52
1166 msgid ""
1167 "When run this way, the program is smart enough to notice fuzzy translations. "
1168 "For example a fuzzy Description will be output as Description-<lang>-fuzzy, "
1169 "and a new, blank Description-<lang> will be added. Translators should "
1170 "remove the -fuzzy fields as they correct the fuzzy translations."
1171 msgstr ""
1172 "Atunci când este rulat în acest mod, programul este suficient de inteligent "
1173 "pentru a observa traducerile aproximative „fuzzy”. De exemplu, o descriere "
1174 "neclară va fi transmisă ca „Description-<limbă>-fuzzy” și va fi adăugată o "
1175 "descriere nouă, goală, „Description-<limbă>”. Traducătorii trebuie să "
1176 "elimine câmpurile -fuzzy pe măsură ce corectează traducerile aproximative."
1177
1178 #. type: =item
1179 #: ../../debconf-getlang:58
1180 msgid "Checking the status of a translation"
1181 msgstr "Verificarea stării unei traduceri"
1182
1183 #. type: textblock
1184 #: ../../debconf-getlang:60
1185 msgid ""
1186 "To check the status of a translation, use the --status flag, and pass the "
1187 "english template file as the first parameter, and all the other translated "
1188 "templates after that. It will output statistics for each of them. For "
1189 "example:"
1190 msgstr ""
1191 "Pentru a verifica starea unei traduceri, utilizați opțiunea „--status” și "
1192 "treceți fișierul șablon în limba engleză ca prim parametru, iar apoi toate "
1193 "celelalte șabloane traduse. Se vor afișa statistici pentru fiecare dintre "
1194 "ele. De exemplu:"
1195
1196 #. type: verbatim
1197 #: ../../debconf-getlang:65
1198 #, no-wrap
1199 msgid ""
1200 " debconf-getlang --stats debian/templates debian/templates.*\n"
1201 "\n"
1202 msgstr ""
1203 " debconf-getlang --stats debian/templates debian/templates.*\n"
1204 "\n"
1205
1206 #. type: =head1
1207 #: ../../debconf-getlang:69
1208 msgid "NOTE"
1209 msgstr "NOTĂ"
1210
1211 #. type: textblock
1212 #: ../../debconf-getlang:71
1213 msgid ""
1214 "Note that the text in the generated templates may be word-wrapped by debconf."
1215 msgstr ""
1216 "Rețineți că textul din șabloanele generate poate fi „word wrapped” (încadrat "
1217 "în pagină) de către debconf."
1218
1219 #. type: textblock
1220 #: ../../debconf-getlang:76
1221 msgid "L<debconf-mergetemplate(1)>"
1222 msgstr "L<debconf-mergetemplate(1)>"
1223
1224 #. type: textblock
1225 #: ../../debconf-get-selections:5
1226 msgid "debconf-get-selections - output contents of debconf database"
1227 msgstr "debconf-get-selections - afișează conținutul bazei de date debconf"
1228
1229 #. type: textblock
1230 #: ../../debconf-get-selections:9
1231 msgid "debconf-get-selections [--installer]"
1232 msgstr "debconf-get-selections [--installer]"
1233
1234 #. type: textblock
1235 #: ../../debconf-get-selections:13
1236 msgid ""
1237 "Output the current debconf database in a format understandable by debconf-"
1238 "set-selections."
1239 msgstr ""
1240 "Afișează baza de date debconf curentă într-un format înțeles de «debconf-set-"
1241 "selections»."
1242
1243 #. type: textblock
1244 #: ../../debconf-get-selections:16
1245 msgid ""
1246 "To dump the debconf database of the debian-installer, from /var/log/"
1247 "installer/cdebconf, use the --installer parameter."
1248 msgstr ""
1249 "Pentru a extrage baza de date „debconf” a «debian-installer», din „/var/log/"
1250 "installer/cdebconf”, utilizați opțiunea „--installer”."
1251
1252 #. type: textblock
1253 #: ../../debconf-get-selections:80 ../../debconf-set-selections:228
1254 msgid "Petter Reinholdtsen <[email protected]>"
1255 msgstr "Petter Reinholdtsen <[email protected]>"
1256
1257 #. type: textblock
1258 #: ../../debconf-loadtemplate:5
1259 msgid "debconf-loadtemplate - load template file into debconf database"
1260 msgstr "debconf-loadtemplate - încarcă fișierul șablon în baza de date debconf"
1261
1262 #. type: verbatim
1263 #: ../../debconf-loadtemplate:16
1264 #, no-wrap
1265 msgid ""
1266 " debconf-loadtemplate owner file [file ..]\n"
1267 "\n"
1268 msgstr ""
1269 " debconf-loadtemplate proprietar fișier [fișier ..]\n"
1270 "\n"
1271
1272 #. type: textblock
1273 #: ../../debconf-loadtemplate:20
1274 msgid ""
1275 "Loads one or more template files into the debconf database. The first "
1276 "parameter specifies the owner of the templates (typically, the owner is the "
1277 "name of a debian package). The remaining parameters are template files to "
1278 "load."
1279 msgstr ""
1280 "Încarcă unul sau mai multe fișiere șablon în baza de date debconf. Primul "
1281 "parametru specifică proprietarul șabloanelor (de obicei, proprietarul este "
1282 "numele unui pachet debian). Parametrii rămași sunt fișierele șablon care "
1283 "urmează să fie încărcate."
1284
1285 #. type: textblock
1286 #: ../../debconf-loadtemplate:27
1287 msgid ""
1288 "This program should never be used from a maintainer script of a package that "
1289 "uses debconf! It may however, be useful in debugging, or to seed the debconf "
1290 "database."
1291 msgstr ""
1292 "Acest program nu ar trebui să fie utilizat niciodată de un script de "
1293 "întreținere a unui pachet care utilizează debconf! Cu toate acestea, poate "
1294 "fi util în depanare sau pentru alimentarea bazei de date debconf."
1295
1296 #. type: textblock
1297 #: ../../debconf-loadtemplate:33
1298 msgid "L<debconf-communicate(1)>"
1299 msgstr "L<debconf-communicate(1)>"
1300
1301 #. type: textblock
1302 #: ../../debconf-mergetemplate:5
1303 msgid "debconf-mergetemplate - merge together multiple debconf template files"
1304 msgstr "debconf-mergetemplate - îmbină mai multe fișiere șablon debconf"
1305
1306 # R-GC, scrie
1307 # - traducerea inițială:
1308 # „ debconf-mergetemplate [opțiuni] [șabloane.ll ...] șabloane”
1309 #. type: verbatim
1310 #: ../../debconf-mergetemplate:19
1311 #, no-wrap
1312 msgid ""
1313 " debconf-mergetemplate [options] [templates.ll ...] templates\n"
1314 "\n"
1315 msgstr ""
1316 " debconf-mergetemplate [opțiuni] [templates.ll ...] templates\n"
1317 "\n"
1318
1319 #. type: textblock
1320 #: ../../debconf-mergetemplate:23
1321 msgid ""
1322 "Note: This utility is deprecated. You should switch to using po-debconf's "
1323 "po2debconf program."
1324 msgstr ""
1325 "Notă: Acest instrument este depreciat. Ar trebui să treceți la utilizarea "
1326 "programului po2debconf al po-debconf."
1327
1328 #. type: textblock
1329 #: ../../debconf-mergetemplate:26
1330 msgid ""
1331 "This program is useful if you have multiple debconf templates files which "
1332 "you want to merge together into one big file. All the specified files will "
1333 "be read in, merged, and output to standard output."
1334 msgstr ""
1335 "Acest program este util dacă aveți mai multe fișiere de șabloane debconf pe "
1336 "care doriți să le îmbinați într-un singur fișier mare. Toate fișierele "
1337 "specificate vor fi citite, fuzionate și trimise la ieșirea standard."
1338
1339 #. type: textblock
1340 #: ../../debconf-mergetemplate:30
1341 msgid ""
1342 "This can be especially useful if you are dealing with translated template "
1343 "files. In this case, you might have your main template file, plus several "
1344 "other files provided by the translators. These files will have translated "
1345 "fields in them, and maybe the translators left in the english versions of "
1346 "the fields they translated, for their reference."
1347 msgstr ""
1348 "Acest lucru poate fi util mai ales dacă aveți de-a face cu fișiere șablon "
1349 "traduse. În acest caz, s-ar putea să aveți fișierul șablon principal, plus "
1350 "alte câteva fișiere furnizate de traducători. Aceste fișiere vor conține "
1351 "câmpuri traduse și poate că traducătorii au lăsat versiunile în limba "
1352 "engleză ale câmpurilor pe care le-au tradus, pentru referință."
1353
1354 #. type: textblock
1355 #: ../../debconf-mergetemplate:36
1356 msgid ""
1357 "So, you want to merge together all the translated templates files with your "
1358 "main templates file. Any fields that are unique to the translated files need "
1359 "to be added in to the correct templates, but any fields they have in common "
1360 "should be superseded by the fields in the main file (which might be more up-"
1361 "to-date)."
1362 msgstr ""
1363 "Deci, doriți să fuzionați toate fișierele de șabloane traduse cu fișierul "
1364 "principal de șabloane. Orice câmpuri care sunt unice pentru fișierele "
1365 "traduse trebuie adăugate în șabloanele corecte, dar orice câmpuri pe care le "
1366 "au în comun trebuie înlocuite de câmpurile din fișierul principal (care ar "
1367 "putea fi mai actualizate)."
1368
1369 #. type: textblock
1370 #: ../../debconf-mergetemplate:42
1371 msgid ""
1372 "This program handles that case properly, just list each of the translated "
1373 "templates files, and then your main templates file last."
1374 msgstr ""
1375 "Acest program se ocupă de acest caz în mod corespunzător, doar listează "
1376 "fiecare dintre fișierele de șabloane traduse și apoi ultimul fișier de "
1377 "șabloane principal."
1378
1379 #. type: =item
1380 #: ../../debconf-mergetemplate:49
1381 msgid "--outdated"
1382 msgstr "--outdated"
1383
1384 #. type: textblock
1385 #: ../../debconf-mergetemplate:51
1386 msgid ""
1387 "Merge in even outdated translations. The default is to drop them with a "
1388 "warning message."
1389 msgstr ""
1390 "Fuzionează chiar și traducerile învechite. În mod implicit, acestea sunt "
1391 "eliminate cu un mesaj de avertizare."
1392
1393 #. type: =item
1394 #: ../../debconf-mergetemplate:54
1395 msgid "--drop-old-templates"
1396 msgstr "--drop-old-templates"
1397
1398 #. type: textblock
1399 #: ../../debconf-mergetemplate:56
1400 msgid ""
1401 "If a translation has an entire template that is not in the master file (and "
1402 "thus is probably an old template), drop that entire template."
1403 msgstr ""
1404 "Dacă o traducere are un șablon întreg care nu se află în fișierul principal "
1405 "(și, prin urmare, este probabil un șablon vechi), renunță la acel șablon "
1406 "întreg."
1407
1408 #. type: textblock
1409 #: ../../debconf-mergetemplate:63
1410 msgid "L<debconf-getlang(1)>"
1411 msgstr "L<debconf-getlang(1)>"
1412
1413 #. type: textblock
1414 #: ../../debconf-set-selections:5
1415 msgid "debconf-set-selections - insert new values into the debconf database"
1416 msgstr "debconf-set-selections - inserează noi valori în baza de date debconf"
1417
1418 #. type: verbatim
1419 #: ../../debconf-set-selections:9
1420 #, no-wrap
1421 msgid ""
1422 " debconf-set-selections file\n"
1423 " debconf-get-selections | ssh newhost debconf-set-selections\n"
1424 "\n"
1425 msgstr ""
1426 " debconf-set-selections fișier\n"
1427 " debconf-get-selections | ssh gazdă-nouă debconf-set-selections\n"
1428 "\n"
1429
1430 #. type: textblock
1431 #: ../../debconf-set-selections:14
1432 msgid ""
1433 "B<debconf-set-selections> can be used to pre-seed the debconf database with "
1434 "answers, or to change answers in the database. Each question will be marked "
1435 "as seen to prevent debconf from asking the question interactively."
1436 msgstr ""
1437 "B<debconf-set-selections> poate fi utilizat pentru a preînsămânța baza de "
1438 "date debconf cu răspunsuri sau pentru a modifica răspunsurile din baza de "
1439 "date. Fiecare întrebare va fi marcată ca văzută pentru a împiedica debconf "
1440 "să pună întrebarea în mod interactiv."
1441
1442 #. type: textblock
1443 #: ../../debconf-set-selections:18
1444 msgid "Reads from a file if a filename is given, otherwise from stdin."
1445 msgstr ""
1446 "Citește dintr-un fișier dacă este dat un nume de fișier, altfel de la "
1447 "intrarea standard."
1448
1449 #. type: textblock
1450 #: ../../debconf-set-selections:22
1451 msgid ""
1452 "Only use this command to seed debconf values for packages that will be or "
1453 "are installed. Otherwise you can end up with values in the database for "
1454 "uninstalled packages that will not go away, or with worse problems involving "
1455 "shared values. It is recommended that this only be used to seed the database "
1456 "if the originating machine has an identical install."
1457 msgstr ""
1458 "Utilizați această comandă numai pentru a însămânța valorile debconf pentru "
1459 "pachetele care vor fi sau sunt instalate. În caz contrar, vă puteți trezi cu "
1460 "valori în baza de date pentru pachete dezinstalate care nu vor dispărea sau "
1461 "cu probleme mai grave care implică valori partajate. Se recomandă utilizarea "
1462 "acestei comenzi pentru însămânțarea bazei de date numai dacă mașina de "
1463 "origine are o instalare identică."
1464
1465 #. type: =head1
1466 #: ../../debconf-set-selections:28
1467 msgid "DATA FORMAT"
1468 msgstr "FORMATUL DATELOR"
1469
1470 #. type: textblock
1471 #: ../../debconf-set-selections:30
1472 msgid ""
1473 "The data is a series of lines. Lines beginning with a # character are "
1474 "comments. Blank lines are ignored. All other lines set the value of one "
1475 "question, and should contain four values, each separated by one character of "
1476 "whitespace. The first value is the name of the package that owns the "
1477 "question. The second is the name of the question, the third value is the "
1478 "type of this question, and the fourth value (through the end of the line) "
1479 "is the value to use for the answer of the question."
1480 msgstr ""
1481 "Datele sunt o serie de linii. Liniile care încep cu un caracter „#” sunt "
1482 "comentarii. Liniile goale sunt ignorate. Toate celelalte linii stabilesc "
1483 "valoarea unei întrebări și ar trebui să conțină patru valori, fiecare "
1484 "separată de un caracter de spațiu alb. Prima valoare este numele pachetului "
1485 "care deține întrebarea. A doua este numele întrebării, a treia valoare este "
1486 "tipul acestei întrebări, iar a patra valoare (până la sfârșitul liniei) este "
1487 "valoarea care trebuie utilizată pentru răspunsul la întrebare."
1488
1489 #. type: textblock
1490 #: ../../debconf-set-selections:38
1491 msgid ""
1492 "Alternatively, the third value can be \"seen\"; then the preseed line only "
1493 "controls whether the question is marked as seen in debconf's database. Note "
1494 "that preseeding a question's value defaults to marking that question as "
1495 "seen, so to override the default value without marking a question seen, you "
1496 "need two lines."
1497 msgstr ""
1498 "Alternativ, a treia valoare poate fi „seen” (văzută); atunci linia de pre-"
1499 "configurare controlează doar dacă întrebarea este marcată ca văzută în baza "
1500 "de date a debconf. Rețineți că preconfigurarea valorii unei întrebări duce "
1501 "implicit la marcarea acelei întrebări ca fiind văzută, astfel încât pentru a "
1502 "trece peste valoarea implicită fără a marca o întrebare ca fiind văzută, "
1503 "aveți nevoie de două linii."
1504
1505 #. type: textblock
1506 #: ../../debconf-set-selections:44
1507 msgid ""
1508 "Lines can be continued to the next line by ending them with a \"\\\" "
1509 "character."
1510 msgstr ""
1511 "Liniile pot fi continuate pe următoarea linie prin terminarea lor cu un "
1512 "caracter „\\”."
1513
1514 #. type: verbatim
1515 #: ../../debconf-set-selections:49
1516 #, no-wrap
1517 msgid ""
1518 " # Force debconf priority to critical.\n"
1519 " debconf debconf/priority select critical\n"
1520 "\n"
1521 msgstr ""
1522 " # Forțează prioritatea debconf la „critică”.\n"
1523 " debconf debconf/priority select critical\n"
1524 "\n"
1525
1526 #. type: verbatim
1527 #: ../../debconf-set-selections:52
1528 #, no-wrap
1529 msgid ""
1530 " # Override default frontend to readline, but allow user to select.\n"
1531 " debconf debconf/frontend select readline\n"
1532 " debconf debconf/frontend seen false\n"
1533 "\n"
1534 msgstr ""
1535 " # Suprascrie interfața implicită la «readline», dar permite utilizatorului să selecteze.\n"
1536 " debconf debconf/frontend select readline\n"
1537 " debconf debconf/frontend seen false\n"
1538 "\n"
1539
1540 #. type: =item
1541 #: ../../debconf-set-selections:60
1542 msgid "B<--verbose>, B<-v>"
1543 msgstr "B<--verbose>, B<-v>"
1544
1545 #. type: textblock
1546 #: ../../debconf-set-selections:62
1547 msgid "verbose output"
1548 msgstr "ieșire cu mesje informative detaliate"
1549
1550 #. type: =item
1551 #: ../../debconf-set-selections:64
1552 msgid "B<--checkonly>, B<-c>"
1553 msgstr "B<--checkonly>, B<-c>"
1554
1555 #. type: textblock
1556 #: ../../debconf-set-selections:66
1557 msgid "only check the input file format, do not save changes to database"
1558 msgstr ""
1559 "verifică doar formatul fișierului de intrare, nu salvează modificările în "
1560 "baza de date"
1561
1562 #. type: textblock
1563 #: ../../debconf-set-selections:72
1564 msgid "L<debconf-get-selections(1)> (available in the debconf-utils package)"
1565 msgstr "L<debconf-get-selections(1)> (disponibil în pachetul debconf-utils)"
1566
1567 #. type: textblock
1568 #: ../../debconf-show:5
1569 msgid "debconf-show - query the debconf database"
1570 msgstr "debconf-show - interoghează baza de date debconf"
1571
1572 #. type: verbatim
1573 #: ../../debconf-show:9
1574 #, no-wrap
1575 msgid ""
1576 " debconf-show packagename [...] [--db=dbname]\n"
1577 " debconf-show --listowners [--db=dbname]\n"
1578 " debconf-show --listdbs\n"
1579 "\n"
1580 msgstr ""
1581 " debconf-show packagename [...] [--db=nume-bază_date]\n"
1582 " debconf-show --listowners [--db=nume-bază_date]\n"
1583 " debconf-show --listdbs\n"
1584 "\n"
1585
1586 #. type: textblock
1587 #: ../../debconf-show:15
1588 msgid "B<debconf-show> lets you query the debconf database in different ways."
1589 msgstr ""
1590 "B<debconf-show> vă permite să interogați baza de date debconf în diferite "
1591 "moduri."
1592
1593 #. type: textblock
1594 #: ../../debconf-show:17
1595 msgid ""
1596 "The most common use is \"debconf-show packagename\", which displays all "
1597 "items in the debconf database owned by a given package, and their current "
1598 "values. Questions that have been asked already are prefixed with an '*'."
1599 msgstr ""
1600 "Cea mai comună utilizare este «debconf-show nume-pachet», care afișează "
1601 "toate elementele din baza de date debconf deținute de un anumit pachet și "
1602 "valorile lor actuale. Întrebările care au fost deja adresate sunt prefixate "
1603 "cu un „*”."
1604
1605 #. type: textblock
1606 #: ../../debconf-show:21
1607 msgid ""
1608 "This can be useful as a debugging aid, and especially handy in bug reports "
1609 "involving a package's use of debconf."
1610 msgstr ""
1611 "Acest lucru poate fi util ca ajutor pentru depanare și mai ales în "
1612 "rapoartele de erori care implică utilizarea debconf de către un pachet."
1613
1614 #. type: =item
1615 #: ../../debconf-show:28
1616 msgid "B<--db=>I<dbname>"
1617 msgstr "B<--db=>I<nume-bază_date>"
1618
1619 #. type: textblock
1620 #: ../../debconf-show:30
1621 msgid ""
1622 "Specify the database to query. By default, debconf-show queries the main "
1623 "database."
1624 msgstr ""
1625 "Specifică baza de date care urmează să fie interogată. În mod implicit, "
1626 "debconf-show interoghează baza de date principală."
1627
1628 #. type: =item
1629 #: ../../debconf-show:33
1630 msgid "B<--listowners>"
1631 msgstr "B<--listowners>"
1632
1633 #. type: textblock
1634 #: ../../debconf-show:35
1635 msgid ""
1636 "Lists all owners of questions in the database. Generally an owner is "
1637 "equivalent to a debian package name."
1638 msgstr ""
1639 "Listează toți proprietarii întrebărilor din baza de date. În general, un "
1640 "proprietar este echivalent cu un nume de pachet debian."
1641
1642 #. type: =item
1643 #: ../../debconf-show:38
1644 msgid "B<--listdbs>"
1645 msgstr "B<--listdbs>"
1646
1647 #. type: textblock
1648 #: ../../debconf-show:40
1649 msgid "Lists all available databases."
1650 msgstr "Listează toate bazele de date disponibile."
1651
1652 #. type: textblock
1653 #: ../../debconf-show:154
1654 msgid "Joey Hess <[email protected]> and Sylvain Ferriol"
1655 msgstr "Joey Hess <[email protected]> și Sylvain Ferriol"
1656
1657 #. type: textblock
1658 #: ../../dpkg-preconfigure:5
1659 msgid ""
1660 "dpkg-preconfigure - let packages ask questions prior to their installation"
1661 msgstr ""
1662 "dpkg-preconfigure - permite pachetelor să pună întrebări înainte de "
1663 "instalarea lor"
1664
1665 #. type: verbatim
1666 #: ../../dpkg-preconfigure:9
1667 #, no-wrap
1668 msgid ""
1669 " dpkg-preconfigure [options] package.deb\n"
1670 "\n"
1671 msgstr ""
1672 " dpkg-preconfigure [opțiuni] pachet.deb\n"
1673 "\n"
1674
1675 #. type: verbatim
1676 #: ../../dpkg-preconfigure:11
1677 #, no-wrap
1678 msgid ""
1679 " dpkg-preconfigure --apt\n"
1680 "\n"
1681 msgstr ""
1682 " dpkg-preconfigure --apt\n"
1683 "\n"
1684
1685 #. type: textblock
1686 #: ../../dpkg-preconfigure:15
1687 msgid ""
1688 "B<dpkg-preconfigure> lets packages ask questions before they are installed. "
1689 "It operates on a set of debian packages, and all packages that use debconf "
1690 "will have their config script run so they can examine the system and ask "
1691 "questions."
1692 msgstr ""
1693 "B<dpkg-preconfigure> permite pachetelor să pună întrebări înainte de a fi "
1694 "instalate. Funcționează pe un set de pachete debian, iar toate pachetele "
1695 "care utilizează debconf vor avea scriptul lor de configurare rulat astfel "
1696 "încât să poată examina sistemul și să pună întrebări."
1697
1698 #. type: textblock
1699 #: ../../dpkg-preconfigure:30
1700 msgid ""
1701 "Set the lowest priority of questions you are interested in. Any questions "
1702 "with a priority below the selected priority will be ignored and their "
1703 "default answers will be used."
1704 msgstr ""
1705 "Stabiliți cea mai mică prioritate a întrebărilor care vă interesează. Orice "
1706 "întrebare cu o prioritate mai mică decât prioritatea selectată va fi "
1707 "ignorată și vor fi utilizate răspunsurile implicite ale acesteia."
1708
1709 #. type: =item
1710 #: ../../dpkg-preconfigure:38
1711 msgid "B<--apt>"
1712 msgstr "B<--apt>"
1713
1714 #. type: textblock
1715 #: ../../dpkg-preconfigure:40
1716 msgid ""
1717 "Run in apt mode. It will expect to read a set of package filenames from "
1718 "stdin, rather than getting them as parameters. Typically this is used to "
1719 "make apt run dpkg-preconfigure on all packages before they are installed. "
1720 "To do this, add something like this to /etc/apt/apt.conf:"
1721 msgstr ""
1722 "Rulează în modul apt. Se va aștepta să citească un set de nume de fișiere de "
1723 "pachete de la intrarea standard, mai degrabă decât să le obțină ca "
1724 "parametri. De obicei, acest lucru este utilizat pentru a face «apt» să "
1725 "ruleze «dpkg-preconfigure» pe toate pachetele înainte ca acestea să fie "
1726 "instalate. Pentru a face acest lucru, adăugați ceva de tipul acesta la „/etc/"
1727 "apt/apt.conf”:"
1728
1729 #. type: verbatim
1730 #: ../../dpkg-preconfigure:45
1731 #, no-wrap
1732 msgid ""
1733 " // Pre-configure all packages before\n"
1734 " // they are installed.\n"
1735 " DPkg::Pre-Install-Pkgs {\n"
1736 " \t\"dpkg-preconfigure --apt --priority=low\";\n"
1737 " };\n"
1738 "\n"
1739 msgstr ""
1740 " // Pre- configurați toate pachetele înainte\n"
1741 " // ca acestea să fie instalate.\n"
1742 " DPkg::Pre-Install-Pkgs {\n"
1743 " \t\"dpkg-preconfigure --apt --priority=low\";\n"
1744 " };\n"
1745 "\n"
1746
1747 #. type: =item
1748 #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69
1749 msgid "B<-h>, B<--help>"
1750 msgstr "B<-h>, B<--help>"
1751
1752 #. type: textblock
1753 #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71
1754 msgid "Display usage help."
1755 msgstr "Afișează ajutorul de utilizare."
1756
1757 #. type: textblock
1758 #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79
1759 msgid "L<debconf(7)>"
1760 msgstr "L<debconf(7)>"
1761
1762 #. type: textblock
1763 #: ../../dpkg-reconfigure:5
1764 msgid "dpkg-reconfigure - reconfigure an already installed package"
1765 msgstr "dpkg-reconfigure - reconfigurează un pachet deja instalat"
1766
1767 #. type: verbatim
1768 #: ../../dpkg-reconfigure:9
1769 #, no-wrap
1770 msgid ""
1771 " dpkg-reconfigure [options] packages\n"
1772 "\n"
1773 msgstr ""
1774 " dpkg-reconfigure [opțiuni] pachete\n"
1775 "\n"
1776
1777 #. type: textblock
1778 #: ../../dpkg-reconfigure:13
1779 msgid ""
1780 "B<dpkg-reconfigure> reconfigures packages after they have already been "
1781 "installed. Pass it the names of a package or packages to reconfigure. It "
1782 "will ask configuration questions, much like when the package was first "
1783 "installed."
1784 msgstr ""
1785 "B<dpkg-reconfigure> reconfigurează pachetele după ce acestea au fost deja "
1786 "instalate. Pasați-i numele pachetului sau pachetelor de reconfigurat. Acesta "
1787 "va pune întrebări de configurare, la fel ca atunci când pachetul a fost "
1788 "instalat pentru prima dată."
1789
1790 #. type: textblock
1791 #: ../../dpkg-reconfigure:18
1792 msgid ""
1793 "If you just want to see the current configuration of a package, see "
1794 "L<debconf-show(1)> instead."
1795 msgstr ""
1796 "Dacă doriți doar să vedeți configurația curentă a unui pachet, consultați în "
1797 "schimb L<debconf-show(1)>."
1798
1799 #. type: textblock
1800 #: ../../dpkg-reconfigure:27
1801 msgid ""
1802 "Select the frontend to use. The default frontend can be permanently changed "
1803 "by:"
1804 msgstr ""
1805 "Selectați interfața care urmează să fie utilizată. Interfața implicită poate "
1806 "fi modificată permanent prin:"
1807
1808 #. type: verbatim
1809 #: ../../dpkg-reconfigure:30
1810 #, no-wrap
1811 msgid ""
1812 " dpkg-reconfigure debconf\n"
1813 "\n"
1814 msgstr ""
1815 " dpkg-reconfigure debconf\n"
1816 "\n"
1817
1818 #. type: textblock
1819 #: ../../dpkg-reconfigure:32
1820 msgid ""
1821 "Note that if you normally have debconf set to use the noninteractive "
1822 "frontend, dpkg-reconfigure will use the dialog frontend instead, so you "
1823 "actually get to reconfigure the package."
1824 msgstr ""
1825 "Rețineți că, dacă în mod normal «debconf» este configurat pentru a utiliza "
1826 "interfața neinteractivă, «dpkg-reconfigure» va utiliza în schimb interfața "
1827 "dialog, astfel încât să reconfigurați pachetul."
1828
1829 #. type: textblock
1830 #: ../../dpkg-reconfigure:38
1831 msgid ""
1832 "Specify the minimum priority of question that will be displayed. dpkg-"
1833 "reconfigure normally shows low priority questions no matter what your "
1834 "default priority is. See L<debconf(7)> for a list."
1835 msgstr ""
1836 "Specificați prioritatea minimă a întrebării care va fi afișată. «dpkg-"
1837 "reconfigure» afișează în mod normal întrebări cu prioritate scăzută, "
1838 "indiferent de prioritatea implicită. Consultați L<debconf(7)> pentru o listă."
1839
1840 #. type: =item
1841 #: ../../dpkg-reconfigure:46
1842 msgid "B<--default-priority>"
1843 msgstr "B<--default-priority>"
1844
1845 #. type: textblock
1846 #: ../../dpkg-reconfigure:48
1847 msgid ""
1848 "Use whatever the default priority of question is, instead of forcing the "
1849 "priority to low."
1850 msgstr ""
1851 "Utilizează prioritatea implicită a întrebării, în loc să forțeze prioritatea "
1852 "să fie scăzută."
1853
1854 #. type: =item
1855 #: ../../dpkg-reconfigure:51
1856 msgid "B<-u>, B<--unseen-only>"
1857 msgstr "B<-u>, B<--unseen-only>"
1858
1859 #. type: textblock
1860 #: ../../dpkg-reconfigure:53
1861 msgid ""
1862 "By default, all questions are shown, even if they have already been "
1863 "answered. If this parameter is set though, only questions that have not yet "
1864 "been seen will be asked."
1865 msgstr ""
1866 "În mod implicit, sunt afișate toate întrebările, chiar dacă s-a răspuns deja "
1867 "la ele. Totuși, dacă acest parametru este definit, vor fi adresate numai "
1868 "întrebările care nu au fost încă văzute."
1869
1870 #. type: =item
1871 #: ../../dpkg-reconfigure:57
1872 msgid "B<--force>"
1873 msgstr "B<--force>"
1874
1875 #. type: textblock
1876 #: ../../dpkg-reconfigure:59
1877 msgid ""
1878 "Force dpkg-reconfigure to reconfigure a package even if the package is in an "
1879 "inconsistent or broken state. Use with caution."
1880 msgstr ""
1881 "Forțează «dpkg-reconfigure» să reconfigureze un pachet chiar dacă pachetul "
1882 "se află într-o stare inconsistentă sau deteriorată. Utilizați cu precauție."
1883
1884 #. type: =item
1885 #: ../../dpkg-reconfigure:62
1886 msgid "B<--no-reload>"
1887 msgstr "B<--no-reload>"
1888
1889 #. type: textblock
1890 #: ../../dpkg-reconfigure:64
1891 msgid ""
1892 "Prevent dpkg-reconfigure from reloading templates. Use with caution; this "
1893 "will prevent dpkg-reconfigure from repairing broken templates databases. "
1894 "However, it may be useful in constrained environments where rewriting the "
1895 "templates database is expensive."
1896 msgstr ""
1897 "Împiedică »dpkg-reconfigure» să reîncarce șabloanele. Utilizați cu "
1898 "precauție; acest lucru va împiedica «dpkg-reconfigure» să repare bazele de "
1899 "date de șabloane defecte. Cu toate acestea, poate fi utilă în medii "
1900 "constrânse în care rescrierea bazei de date a șabloanelor este costisitoare."
1901
1902 #. type: TH
1903 #: debconf.conf.5:1
1904 #, no-wrap
1905 msgid "DEBCONF.CONF"
1906 msgstr "DEBCONF.CONF"
1907
1908 #. type: Plain text
1909 #: debconf.conf.5:4
1910 msgid "debconf.conf - debconf configuration file"
1911 msgstr "debconf.conf - fișierul de configurare debconf"
1912
1913 #. type: Plain text
1914 #: debconf.conf.5:12
1915 msgid ""
1916 "Debconf is a configuration system for Debian packages. /etc/debconf.conf and "
1917 "~/.debconfrc are configuration files debconf uses to determine which "
1918 "databases it should use. These databases are used for storing two types of "
1919 "information; dynamic config data the user enters into it, and static "
1920 "template data. Debconf offers a flexible, extensible database backend. New "
1921 "drivers can be created with a minimum of effort, and sets of drivers can be "
1922 "combined in various ways."
1923 msgstr ""
1924 "Debconf este un sistem de configurare pentru pachetele Debian. „/etc/"
1925 "debconf.conf” și „~/.debconfrc” sunt fișiere de configurare pe care debconf "
1926 "le folosește pentru a determina ce baze de date ar trebui să folosească. "
1927 "Aceste baze de date sunt folosite pentru stocarea a două tipuri de "
1928 "informații; date de configurare dinamice pe care utilizatorul le introduce "
1929 "în ele și date statice de șablon. Debconf oferă un sistem de control "
1930 "(driver) a bazelor de date flexibil și extensibil. Noi sisteme de control "
1931 "pot fi create cu un minim de efort, iar seturile de sisteme de control pot "
1932 "fi combinate în diverse moduri."
1933
1934 #. type: Plain text
1935 #: debconf.conf.5:17
1936 #, no-wrap
1937 msgid ""
1938 " # This is a sample config file that is\n"
1939 " # sufficient to use debconf.\n"
1940 " Config: configdb\n"
1941 " Templates: templatedb\n"
1942 msgstr ""
1943 " # Acesta este un exemplu de fișier de configurare\n"
1944 " # care este suficient pentru a utiliza debconf.\n"
1945 " Config: configdb\n"
1946 " Templates: templatedb\n"
1947
1948 #. type: Plain text
1949 #: debconf.conf.5:21
1950 #, no-wrap
1951 msgid ""
1952 " Name: configdb\n"
1953 " Driver: File\n"
1954 " Filename: /var/cache/debconf/config.dat\n"
1955 msgstr ""
1956 " Name: configdb\n"
1957 " Driver: File\n"
1958 " Filename: /var/cache/debconf/config.dat\n"
1959
1960 #. type: Plain text
1961 #: debconf.conf.5:26
1962 #, no-wrap
1963 msgid ""
1964 " Name: templatedb\n"
1965 " Driver: File\n"
1966 " Mode: 644\n"
1967 " Filename: /var/cache/debconf/templates.dat\n"
1968 msgstr ""
1969 " Name: templatedb\n"
1970 " Driver: File\n"
1971 " Mode: 644\n"
1972 " Filename: /var/cache/debconf/templates.dat\n"
1973
1974 #. type: SH
1975 #: debconf.conf.5:26
1976 #, no-wrap
1977 msgid "FILE FORMAT"
1978 msgstr "FORMATUL FIȘIERULUI"
1979
1980 #. type: Plain text
1981 #: debconf.conf.5:30
1982 msgid ""
1983 "The format of this file is a series of stanzas, each separated by at least "
1984 "one wholly blank line. Comment lines beginning with a \"#\" character are "
1985 "ignored."
1986 msgstr ""
1987 "Formatul acestui fișier este o serie de strofe, fiecare separată de cel "
1988 "puțin un rând complet gol. Liniile de comentariu care încep cu un caracter "
1989 "„#” sunt ignorate."
1990
1991 #. type: Plain text
1992 #: debconf.conf.5:33
1993 msgid ""
1994 "The first stanza of the file is special, is used to configure debconf as a "
1995 "whole. Two fields are required to be in this first stanza:"
1996 msgstr ""
1997 "Prima strofă a fișierului este specială, este utilizată pentru a configura "
1998 "debconf ca un întreg. Două câmpuri trebuie să fie în această primă strofă:"
1999
2000 #. type: TP
2001 #: debconf.conf.5:34
2002 #, no-wrap
2003 msgid "B<Config>"
2004 msgstr "B<Config>"
2005
2006 #. type: Plain text
2007 #: debconf.conf.5:37
2008 msgid "Specifies the name of the database from which to load config data."
2009 msgstr ""
2010 "Specifică numele bazei de date din care se încarcă datele de configurare."
2011
2012 #. type: TP
2013 #: debconf.conf.5:37
2014 #, no-wrap
2015 msgid "B<Templates>"
2016 msgstr "B<Templates>"
2017
2018 #. type: Plain text
2019 #: debconf.conf.5:40
2020 msgid "Specifies the name of the database to use for the template cache."
2021 msgstr ""
2022 "Specifică numele bazei de date care urmează să fie utilizată pentru cache-ul "
2023 "șablonului."
2024
2025 #. type: Plain text
2026 #: debconf.conf.5:43
2027 msgid "Additional fields that can be used include:"
2028 msgstr "Câmpurile suplimentare care pot fi utilizate includ:"
2029
2030 #. type: TP
2031 #: debconf.conf.5:44
2032 #, no-wrap
2033 msgid "B<Frontend>"
2034 msgstr "B<Frontend>"
2035
2036 #. type: Plain text
2037 #: debconf.conf.5:48
2038 msgid ""
2039 "The frontend Debconf should use, overriding any frontend set in the debconf "
2040 "database."
2041 msgstr ""
2042 "Interfața pe care Debconf ar trebui să o utilizeze, cu prioritate față de "
2043 "orice interfață definită în baza de date debconf."
2044
2045 #. type: TP
2046 #: debconf.conf.5:48
2047 #, no-wrap
2048 msgid "B<Priority>"
2049 msgstr "B<Priority>"
2050
2051 #. type: Plain text
2052 #: debconf.conf.5:52
2053 msgid ""
2054 "The priority Debconf should use, overriding any priority set in the debconf "
2055 "database."
2056 msgstr ""
2057 "Prioritatea pe care trebuie să o utilizeze Debconf, care prevalează asupra "
2058 "oricărei priorități definite în baza de date debconf."
2059
2060 #. type: TP
2061 #: debconf.conf.5:52
2062 #, no-wrap
2063 msgid "B<Admin-Email>"
2064 msgstr "B<Admin-Email>"
2065
2066 #. type: Plain text
2067 #: debconf.conf.5:59
2068 msgid ""
2069 "The email address Debconf should send mail to if it needs to make sure that "
2070 "the admin has seen an important message. Defaults to \"root\", but can be "
2071 "set to any valid email address to send the mail there. If you prefer to "
2072 "never have debconf send you mail, specify a blank address. This can be "
2073 "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable."
2074 msgstr ""
2075 "Adresa de e poștă electronică la care Debconf ar trebui să trimită mesaje "
2076 "dacă trebuie să se asigure că administratorul a văzut un mesaj important. "
2077 "Valoarea implicită este „root”, dar poate fi definită la orice adresă de "
2078 "poștă electronică validă pentru a trimite mesajul acolo. Dacă preferați ca "
2079 "debconf să nu vă trimită niciodată mesaje, specificați o adresă goală. Acest "
2080 "lucru poate fi anulat din mers cu variabila de mediu DEBCONF_ADMIN_EMAIL."
2081
2082 #. type: Plain text
2083 #: debconf.conf.5:59 debconf.conf.5:395
2084 #, no-wrap
2085 msgid "B<Debug>"
2086 msgstr "B<Debug>"
2087
2088 #. type: Plain text
2089 #: debconf.conf.5:67
2090 msgid ""
2091 "If set, this will cause debconf to output debugging information to standard "
2092 "error. The value it is set to can be something like \"user\", \"developer\", "
2093 "\"db\", or a regular expression. Typically, rather than setting it "
2094 "permanently in a config file, you will only want to temporarily turn on "
2095 "debugging, and the DEBCONF_DEBUG environment variable can be set instead to "
2096 "accomplish that."
2097 msgstr ""
2098 "Dacă este activată, aceasta va determina debconf să emită informații de "
2099 "depanare la ieșirea de eroare standard. Valoarea la care este definită poate "
2100 "fi ceva de genul „user”, „developer”, „db” sau o expresie regulată. De "
2101 "obicei, mai degrabă decât să o definiți permanent într-un fișier de "
2102 "configurare, veți dori doar să activați temporar depanarea, iar variabila de "
2103 "mediu DEBCONF_DEBUG poate fi definită pentru a realiza acest lucru."
2104
2105 #. type: TP
2106 #: debconf.conf.5:67
2107 #, no-wrap
2108 msgid "B<NoWarnings>"
2109 msgstr "B<NoWarnings>"
2110
2111 #. type: Plain text
2112 #: debconf.conf.5:72
2113 msgid ""
2114 "If set, this will make debconf not display warnings about various things. "
2115 "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment "
2116 "variable."
2117 msgstr ""
2118 "Dacă este activată, aceasta va face ca debconf să nu afișeze avertismente cu "
2119 "privire la diverse lucruri. Acest lucru poate fi anulat din mers cu "
2120 "variabila de mediu DEBCONF_NOWARNINGS."
2121
2122 #. type: TP
2123 #: debconf.conf.5:72
2124 #, no-wrap
2125 msgid "B<Log>"
2126 msgstr "B<Log>"
2127
2128 #. type: Plain text
2129 #: debconf.conf.5:77
2130 msgid ""
2131 "Makes debconf log debugging information as it runs, to the syslog. The value "
2132 "it is set to controls that is logged. See Debug, above for an explanation of "
2133 "the values that can be set to control what is logged."
2134 msgstr ""
2135 "Face ca debconf să înregistreze informațiile de depanare pe măsură ce "
2136 "rulează, în syslog. Valoarea la care este definită controlează ceea ce este "
2137 "înregistrat. Consultați Debug, mai sus, pentru o explicație a valorilor care "
2138 "pot fi definite pentru a controla ceea ce este înregistrat."
2139
2140 #. type: TP
2141 #: debconf.conf.5:77
2142 #, no-wrap
2143 msgid "B<Terse>"
2144 msgstr "B<Terse>"
2145
2146 #. type: Plain text
2147 #: debconf.conf.5:82
2148 msgid ""
2149 "If set to \"true\", makes some debconf frontends use a special terse display "
2150 "mode that outputs as little as possible. Defaults to false. Terse mode may "
2151 "be temporarily set via the DEBCONF_TERSE environment variable."
2152 msgstr ""
2153 "Dacă este stabilită la „true”, face ca unele interfețe debconf să utilizeze "
2154 "un mod special de afișare laconică care afișează cât mai puțin posibil. "
2155 "Valoarea implicită este „false”. Modul „Terse” (laconic) poate fi activat "
2156 "temporar prin intermediul variabilei de mediu DEBCONF_TERSE."
2157
2158 #. type: Plain text
2159 #: debconf.conf.5:87
2160 #, no-wrap
2161 msgid ""
2162 "For example, the first stanza of a file might look like this:\n"
2163 " Config: configdb\n"
2164 " Templates: templatedb\n"
2165 msgstr ""
2166 "De exemplu, prima strofă a unui fișier poate arăta astfel:\n"
2167 " Config: configdb\n"
2168 " Templates: templatedb\n"
2169
2170 #. type: Plain text
2171 #: debconf.conf.5:91
2172 #, no-wrap
2173 msgid ""
2174 "Each remaining stanza in the file sets up a database. A database stanza\n"
2175 "begins by naming the database:\n"
2176 " Name: configdb\n"
2177 msgstr ""
2178 "Fiecare strofă rămasă în fișier stabilește o bază de date. O strofă de bază de date\n"
2179 "începe prin numirea bazei de date:\n"
2180 " Name: configdb\n"
2181
2182 #. type: Plain text
2183 #: debconf.conf.5:95
2184 #, no-wrap
2185 msgid ""
2186 "Then it indicates what database driver should be used for this database.\n"
2187 "See DRIVERS, below, for information about what drivers are available.\n"
2188 " Driver: File\n"
2189 msgstr ""
2190 "Apoi indică ce sistem de control (driver) de bază de date ar trebui utilizat pentru această bază de date.\n"
2191 "Consultați SISTEME DE CONTROL, mai jos, pentru informații despre sistemele de control disponibile.\n"
2192 " Driver: File\n"
2193
2194 #. type: Plain text
2195 #: debconf.conf.5:100
2196 #, no-wrap
2197 msgid ""
2198 "You can indicate that the database is not essential to the proper\n"
2199 "functioning of debconf by saying it is not required. This will make debconf\n"
2200 "muddle on if the database fails for some reason.\n"
2201 " Required: false\n"
2202 msgstr ""
2203 "Puteți indica faptul că baza de date nu este esențială pentru buna funcționare\n"
2204 "a debconf prin a spune că nu este necesară. Acest lucru va face ca debconf\n"
2205 "să meargă mai departe dacă baza de date eșuează din anumite motive.\n"
2206 " Required: false\n"
2207
2208 #. type: Plain text
2209 #: debconf.conf.5:104
2210 #, no-wrap
2211 msgid ""
2212 "You can mark any database as readonly and debconf will not write anything\n"
2213 "to it.\n"
2214 " Readonly: true\n"
2215 msgstr ""
2216 "Puteți marca orice bază de date ca „readonly” (numai-citire) și debconf nu\n"
2217 "va scrie nimic în ea.\n"
2218 " Readonly: true\n"
2219
2220 #. type: Plain text
2221 #: debconf.conf.5:107
2222 msgid ""
2223 "You can also limit what types of data can go into the database with Accept- "
2224 "and Reject- lines; see ACCESS CONTROLS, below."
2225 msgstr ""
2226 "De asemenea, puteți limita tipurile de date care pot intra în baza de date "
2227 "cu ajutorul liniilor Accept- și Reject-; a se vedea CONTROLUL ACCESULUI, mai "
2228 "jos."
2229
2230 #. type: Plain text
2231 #: debconf.conf.5:112
2232 #, no-wrap
2233 msgid ""
2234 "The remainder of each database stanza is used to provide configuration\n"
2235 "specific to that driver. For example, the Text driver needs to know\n"
2236 "a directory to put the database in, so you might say:\n"
2237 " Filename: /var/cache/debconf/config.dat\n"
2238 msgstr ""
2239 "Restul fiecărei strofe a bazei de date este utilizat pentru a furniza\n"
2240 "configurația specifică sistemului de control (driver) respectiv. De exemplu,\n"
2241 "sistemul de control „Text” trebuie să știe că are un director în care să\n"
2242 "plaseze baza de date, așa că puteți spune:\n"
2243 " Filename: /var/cache/debconf/config.dat\n"
2244
2245 #. type: SH
2246 #: debconf.conf.5:112
2247 #, no-wrap
2248 msgid "DRIVERS"
2249 msgstr "SISTEME DE CONTROL"
2250
2251 #. type: Plain text
2252 #: debconf.conf.5:119
2253 msgid ""
2254 "A number of drivers are available, and more can be written with little "
2255 "difficulty. Drivers come in two general types. First there are real drivers "
2256 "-- drivers that actually access and store data in some kind of database, "
2257 "which might be on the local filesystem, or on a remote system. Then there "
2258 "are meta-drivers that combine other drivers together to form more "
2259 "interesting systems. Let's start with the former."
2260 msgstr ""
2261 "Există o serie de sisteme de control (drivers) disponibile, iar altele pot "
2262 "fi scrise cu puțină dificultate. Sistemele de control sunt în general de "
2263 "două tipuri. În primul rând, există sisteme de control reale - sisteme de "
2264 "control care accesează și stochează efectiv date într-un anumit tip de bază "
2265 "de date, care poate fi pe sistemul de fișiere local sau pe un sistem de la "
2266 "distanță. Apoi există meta-sisteme de control care combină alte sisteme de "
2267 "control pentru a forma sisteme mai interesante. Să începem cu primele."
2268
2269 #. type: TP
2270 #: debconf.conf.5:120
2271 #, no-wrap
2272 msgid "B<File>"
2273 msgstr "B<File>"
2274
2275 #. type: Plain text
2276 #: debconf.conf.5:127
2277 msgid ""
2278 "This database driver allows debconf to store a whole database in a single "
2279 "flat text file. This makes it easy to archive, transfer between machines, "
2280 "and edit. It is one of the more compact database formats in terms of disk "
2281 "space used. It is also one of the slowest."
2282 msgstr ""
2283 "Acest sistem de control de bază de date permite debconf să stocheze o "
2284 "întreagă bază de date într-un singur fișier text plat. Acest lucru "
2285 "facilitează arhivarea, transferul între mașini și editarea. Este unul dintre "
2286 "cele mai compacte formate de baze de date în ceea ce privește spațiul "
2287 "utilizat pe disc. Este, de asemenea, unul dintre cele mai lente."
2288
2289 #. type: Plain text
2290 #: debconf.conf.5:130
2291 msgid ""
2292 "On the downside, the entire file has to be read in each time debconf starts "
2293 "up, and saving it is also slow."
2294 msgstr ""
2295 "Pe de altă parte, întregul fișier trebuie să fie citit de fiecare dată când "
2296 "debconf pornește, iar salvarea acestuia este, de asemenea, lentă."
2297
2298 #. type: Plain text
2299 #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309
2300 msgid "The following things are configurable for this driver."
2301 msgstr "Următoarele lucruri sunt configurabile pentru acest sistem de control."
2302
2303 #. type: TP
2304 #: debconf.conf.5:133
2305 #, no-wrap
2306 msgid "B<Filename>"
2307 msgstr "B<Filename>"
2308
2309 #. type: Plain text
2310 #: debconf.conf.5:136
2311 msgid "The file to use as the database. This is a required field."
2312 msgstr ""
2313 "Fișierul care urmează să fie utilizat ca bază de date. Acesta este un câmp "
2314 "obligatoriu."
2315
2316 #. type: TP
2317 #: debconf.conf.5:136 debconf.conf.5:203
2318 #, no-wrap
2319 msgid "B<Mode>"
2320 msgstr "B<Mode>"
2321
2322 #. type: Plain text
2323 #: debconf.conf.5:140
2324 msgid ""
2325 "The permissions to create the file with if it does not exist. Defaults to "
2326 "600, since the file could contain passwords in some circumstances."
2327 msgstr ""
2328 "Permisiunile cu care se creează fișierul dacă acesta nu există. Valoarea "
2329 "implicită este 600, deoarece fișierul ar putea conține parole în anumite "
2330 "circumstanțe."
2331
2332 #. type: TP
2333 #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310
2334 #, no-wrap
2335 msgid "B<Format>"
2336 msgstr "B<Format>"
2337
2338 #. type: Plain text
2339 #: debconf.conf.5:144 debconf.conf.5:180
2340 msgid ""
2341 "The format of the file. See FORMATS below. Defaults to using a rfc-822 like "
2342 "format."
2343 msgstr ""
2344 "Formatul fișierului. Consultați secțiunea FORMATE de mai jos. În mod "
2345 "implicit se utilizează un format asemănător formatului rfc-822."
2346
2347 #. type: Plain text
2348 #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371
2349 #, no-wrap
2350 msgid "B<Backup>"
2351 msgstr "B<Backup>"
2352
2353 #. type: Plain text
2354 #: debconf.conf.5:148 debconf.conf.5:184
2355 msgid ""
2356 "Whether a backup should be made of the old file before changing it. "
2357 "Defaults to true."
2358 msgstr ""
2359 "Dacă ar trebui făcută o copie de rezervă a fișierului vechi înainte de a-l "
2360 "modifica. Valoarea implicită este „true”."
2361
2362 #. type: Plain text
2363 #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209
2364 msgid "As example stanza setting up a database using this driver:"
2365 msgstr ""
2366 "Ca exemplu de configurare a unei baze de date folosind acest sistem de "
2367 "control:"
2368
2369 #. type: Plain text
2370 #: debconf.conf.5:155
2371 #, no-wrap
2372 msgid ""
2373 " Name: mydb\n"
2374 " Driver: File\n"
2375 " Filename: /var/cache/debconf/mydb.dat\n"
2376 msgstr ""
2377 " Name: mydb\n"
2378 " Driver: File\n"
2379 " Filename: /var/cache/debconf/mydb.dat\n"
2380
2381 #. type: TP
2382 #: debconf.conf.5:156
2383 #, no-wrap
2384 msgid "B<DirTree>"
2385 msgstr "B<DirTree>"
2386
2387 #. type: Plain text
2388 #: debconf.conf.5:166
2389 msgid ""
2390 "This database driver allows debconf to store data in a hierarchical "
2391 "directory structure. The names of the various debconf templates and "
2392 "questions are used as-is to form directories with files in them. This format "
2393 "for the database is the easiest to browse and fiddle with by hand. It has "
2394 "very good load and save speeds. It also typically occupies the most space, "
2395 "since a lot of small files and subdirectories do take up some additional "
2396 "room."
2397 msgstr ""
2398 "Acest sistem de control de bază de date permite debconf să stocheze date "
2399 "într-o structură ierarhică de directoare. Numele diferitelor șabloane și "
2400 "întrebări debconf sunt utilizate ca atare pentru a forma directoare cu "
2401 "fișiere în ele. Acest format pentru baza de date este cel mai ușor de "
2402 "navigat și de manipulat manual. Are viteze foarte bune de încărcare și "
2403 "salvare. De asemenea, ocupă de obicei cel mai mult spațiu, deoarece o "
2404 "mulțime de fișiere mici și subdirectoare ocupă spațiu suplimentar."
2405
2406 #. type: TP
2407 #: debconf.conf.5:169
2408 #, no-wrap
2409 msgid "B<Directory>"
2410 msgstr "B<Directory>"
2411
2412 #. type: Plain text
2413 #: debconf.conf.5:172
2414 msgid "The directory to put the files in. Required."
2415 msgstr "Directorul în care se pun fișierele. Necesar."
2416
2417 #. type: TP
2418 #: debconf.conf.5:172
2419 #, no-wrap
2420 msgid "B<Extension>"
2421 msgstr "B<Extension>"
2422
2423 #. type: Plain text
2424 #: debconf.conf.5:176
2425 msgid ""
2426 "An extension to add to the names of files. Must be set to a non-empty "
2427 "string; defaults to \".dat\""
2428 msgstr ""
2429 "O extensie de adăugat la numele fișierelor. Trebuie să fie definită cu un "
2430 "șir nevid; valoarea implicită este „.dat”"
2431
2432 #. type: Plain text
2433 #: debconf.conf.5:192
2434 #, no-wrap
2435 msgid ""
2436 " Name: mydb\n"
2437 " Driver: DirTree\n"
2438 " Directory: /var/cache/debconf/mydb\n"
2439 " Extension: .txt\n"
2440 msgstr ""
2441 " Name: mydb\n"
2442 " Driver: DirTree\n"
2443 " Directory: /var/cache/debconf/mydb\n"
2444 " Extension: .txt\n"
2445
2446 #. type: TP
2447 #: debconf.conf.5:193
2448 #, no-wrap
2449 msgid "B<PackageDir>"
2450 msgstr "B<PackageDir>"
2451
2452 #. type: Plain text
2453 #: debconf.conf.5:200
2454 msgid ""
2455 "This database driver is a compromise between the File and DirTree databases. "
2456 "It uses a directory, in which there is (approximately) one file per package "
2457 "that uses debconf. This is fairly fast, while using little more room than "
2458 "the File database driver."
2459 msgstr ""
2460 "Acest sistem de control de bază de date este un compromis între bazele de "
2461 "date „File” și „DirTree”. Acesta utilizează un director, în care există "
2462 "(aproximativ) un fișier pentru fiecare pachet care utilizează debconf. Acest "
2463 "lucru este destul de rapid, în timp ce utilizează puțin mai mult spațiu "
2464 "decât sistemul de control de bază de date „File”."
2465
2466 #. type: Plain text
2467 #: debconf.conf.5:203
2468 msgid ""
2469 "This driver is configurable in the same ways as is the DirTree driver, plus:"
2470 msgstr ""
2471 "Acest sistem de control este configurabil în aceleași moduri ca și sistemul "
2472 "de control „DirTree”, plus:"
2473
2474 #. type: Plain text
2475 #: debconf.conf.5:207
2476 msgid ""
2477 "The permissions to create files with. Defaults to 600, since the files could "
2478 "contain passwords in some circumstances."
2479 msgstr ""
2480 "Permisiunile cu care se creează fișierele. Valoarea implicită este 600, "
2481 "deoarece fișierele ar putea conține parole în anumite circumstanțe."
2482
2483 #. type: Plain text
2484 #: debconf.conf.5:213
2485 #, no-wrap
2486 msgid ""
2487 " Name: mydb\n"
2488 " Driver: PackageDir\n"
2489 " Directory: /var/cache/debconf/mydb\n"
2490 msgstr ""
2491 " Name: mydb\n"
2492 " Driver: PackageDir\n"
2493 " Directory: /var/cache/debconf/mydb\n"
2494
2495 #. type: TP
2496 #: debconf.conf.5:214
2497 #, no-wrap
2498 msgid "B<LDAP>"
2499 msgstr "B<LDAP>"
2500
2501 #. type: Plain text
2502 #: debconf.conf.5:218
2503 msgid ""
2504 "WARNING: This database driver is currently experimental. Use with caution."
2505 msgstr ""
2506 "AVERTISMENT: Acest sistem de control de bază de date este în prezent "
2507 "experimental. Utilizați-l cu precauție."
2508
2509 #. type: Plain text
2510 #: debconf.conf.5:226
2511 msgid ""
2512 "This database driver accesses a LDAP directory for debconf configuration "
2513 "data. Due to the nature of the beast, LDAP directories should typically be "
2514 "accessed in read-only mode. This is because multiple accesses can take "
2515 "place, and it's generally better for data consistency if nobody tries to "
2516 "modify the data while this is happening. Of course, write access is "
2517 "supported for those cases where you do want to update the config data in the "
2518 "directory."
2519 msgstr ""
2520 "Acest sistem de control de bază de date accesează un director LDAP pentru "
2521 "datele de configurare debconf. Datorită naturii acestui mecanism, "
2522 "directoarele LDAP ar trebui accesate în mod normal în modul numai citire. "
2523 "Acest lucru se datorează faptului că pot avea loc accesări multiple și, în "
2524 "general, este mai bine pentru consistența datelor dacă nimeni nu încearcă să "
2525 "modifice datele în acest timp. Desigur, accesul în scris este acceptat "
2526 "pentru acele cazuri în care doriți să actualizați datele de configurare din "
2527 "director."
2528
2529 #. type: Plain text
2530 #: debconf.conf.5:229
2531 msgid ""
2532 "For information about setting up a LDAP server for debconf, read /usr/share/"
2533 "doc/debconf-doc/README.LDAP (from the debconf-doc package)."
2534 msgstr ""
2535 "Pentru informații despre configurarea unui server LDAP pentru debconf, "
2536 "citiți „/usr/share/doc/debconf-doc/README.LDAP” (din pachetul „debconf-doc”)."
2537
2538 #. type: Plain text
2539 #: debconf.conf.5:232
2540 msgid ""
2541 "To use this database driver, you must have the libnet-ldap-perl package "
2542 "installed. Debconf suggests that package, but does not depend on it."
2543 msgstr ""
2544 "Pentru a utiliza acest sistem de control de bază de date, trebuie să aveți "
2545 "instalat pachetul „libnet-ldap-perl”. debconf sugerează acest pachet, dar nu "
2546 "depinde de el."
2547
2548 #. type: Plain text
2549 #: debconf.conf.5:236
2550 msgid ""
2551 "Please carefully consider the security implications of using a remote "
2552 "debconf database. Unless you trust the source, and you trust the intervening "
2553 "network, it is not a very safe thing to do."
2554 msgstr ""
2555 "Vă rugăm să analizați cu atenție implicațiile de securitate ale utilizării "
2556 "unei baze de date debconf la distanță. Dacă nu aveți încredere în sursă și "
2557 "în rețeaua care intervine, nu este un lucru foarte sigur de făcut."
2558
2559 #. type: TP
2560 #: debconf.conf.5:239
2561 #, no-wrap
2562 msgid "B<server>"
2563 msgstr "B<server>"
2564
2565 #. type: Plain text
2566 #: debconf.conf.5:242
2567 msgid "The host name or IP address of an LDAP server to connect to."
2568 msgstr ""
2569 "Numele gazdei sau adresa IP a unui server LDAP la care să se efectueze "
2570 "conectarea."
2571
2572 #. type: TP
2573 #: debconf.conf.5:242
2574 #, no-wrap
2575 msgid "B<port>"
2576 msgstr "B<port>"
2577
2578 #. type: Plain text
2579 #: debconf.conf.5:246
2580 msgid ""
2581 "The port on which to connect to the LDAP server. If none is given, the "
2582 "default port is used."
2583 msgstr ""
2584 "Portul la care se face conectarea la serverul LDAP. Dacă nu este dat "
2585 "niciunul, este utilizat portul implicit."
2586
2587 #. type: TP
2588 #: debconf.conf.5:246
2589 #, no-wrap
2590 msgid "B<basedn>"
2591 msgstr "B<basedn>"
2592
2593 #. type: Plain text
2594 #: debconf.conf.5:251
2595 msgid ""
2596 "The DN under which all config items will be stored. Each config item will be "
2597 "assumed to live in a DN of cn=E<lt>item nameE<gt>,E<lt>Base DNE<gt>. If this "
2598 "structure is not followed, all bets are off."
2599 msgstr ""
2600 "DN-ul sub care vor fi stocate toate elementele de configurare. Se presupune "
2601 "că fiecare element de configurare va trăi într-un DN de tipul cn=E<lt>numele "
2602 "elementuluiE<gt>,E<lt>DN de bazăE<gt>. Dacă această structură nu este "
2603 "respectată, toate pariurile sunt închise..."
2604
2605 #. type: TP
2606 #: debconf.conf.5:251
2607 #, no-wrap
2608 msgid "B<binddn>"
2609 msgstr "B<binddn>"
2610
2611 #. type: Plain text
2612 #: debconf.conf.5:255
2613 msgid ""
2614 "The DN to bind to the directory as. Anonymous bind will be used if none is "
2615 "specified."
2616 msgstr ""
2617 "DN-ul pentru conectarea la director. Dacă nu este specificat niciunul, se va "
2618 "utiliza legătura anonimă."
2619
2620 #. type: TP
2621 #: debconf.conf.5:255
2622 #, no-wrap
2623 msgid "B<bindpasswd>"
2624 msgstr "B<bindpasswd>"
2625
2626 #. type: Plain text
2627 #: debconf.conf.5:259
2628 msgid ""
2629 "The password to use in an authenticated bind (used with binddn, above). If "
2630 "not specified, anonymous bind will be used."
2631 msgstr ""
2632 "Parola care urmează să fie utilizată într-o legătură autentificată "
2633 "(utilizată cu binddn, mai sus). Dacă nu este specificată, se va utiliza "
2634 "legătura anonimă."
2635
2636 #. type: Plain text
2637 #: debconf.conf.5:265
2638 msgid ""
2639 "This option should not be used in the general case. Anonymous binding should "
2640 "be sufficient most of the time for read-only access. Specifying a bind DN "
2641 "and password should be reserved for the occasional case where you wish to "
2642 "update the debconf configuration data."
2643 msgstr ""
2644 "Această opțiune nu ar trebui utilizată în cazul general. Legarea anonimă ar "
2645 "trebui să fie suficientă de cele mai multe ori pentru accesul doar la "
2646 "citire. Specificarea unui DN și a unei parole de conectare ar trebui "
2647 "rezervată pentru cazurile ocazionale în care doriți să actualizați datele de "
2648 "configurare debconf."
2649
2650 #. type: TP
2651 #: debconf.conf.5:266
2652 #, no-wrap
2653 msgid "B<keybykey>"
2654 msgstr "B<keybykey>"
2655
2656 #. type: Plain text
2657 #: debconf.conf.5:272
2658 msgid ""
2659 "Enable access to individual LDAP entries, instead of fetching them all at "
2660 "once in the beginning. This is very useful if you want to monitor your LDAP "
2661 "logs for specific debconf keys requested. In this way, you could also write "
2662 "custom handling code on the LDAP server part."
2663 msgstr ""
2664 "Activează accesul la intrări LDAP individuale, în loc de a le prelua pe "
2665 "toate odată la început. Acest lucru este foarte util dacă doriți să "
2666 "monitorizați jurnalele LDAP pentru anumite chei debconf solicitate. În acest "
2667 "fel, ați putea scrie, de asemenea, cod de manipulare personalizat pe partea "
2668 "serverului LDAP."
2669
2670 #. type: Plain text
2671 #: debconf.conf.5:279
2672 msgid ""
2673 "Note that when this option is enabled, the connection to the LDAP server is "
2674 "kept active during the whole Debconf run. This is a little different from "
2675 "the all-in-one behavior where two brief connections are made to LDAP; in the "
2676 "beginning to retrieve all the entries, and in the end to save eventual "
2677 "changes."
2678 msgstr ""
2679 "Rețineți că atunci când această opțiune este activată, conexiunea la "
2680 "serverul LDAP este menținută activă pe parcursul întregii execuții Debconf. "
2681 "Acest lucru este puțin diferit de comportamentul „toate în una” în care se "
2682 "fac două conexiuni scurte la LDAP; la început pentru a prelua toate "
2683 "intrările și la sfârșit pentru a salva eventualele modificări."
2684
2685 #. type: Plain text
2686 #: debconf.conf.5:284
2687 msgid ""
2688 "An example stanza setting up a database using this driver, assuming the "
2689 "remote database is on example.com and can be accessed anonymously:"
2690 msgstr ""
2691 "Un exemplu de strofă care configurează o bază de date utilizând acest sistem "
2692 "de control, presupunând că baza de date de la distanță se află pe "
2693 "example.com și poate fi accesată anonim:"
2694
2695 #. type: Plain text
2696 #: debconf.conf.5:291
2697 #, no-wrap
2698 msgid ""
2699 " Name: ldapdb\n"
2700 " Driver: LDAP\n"
2701 " Readonly: true\n"
2702 " Server: example.com\n"
2703 " BaseDN: cn=debconf,dc=example,dc=com\n"
2704 " KeyByKey: 0\n"
2705 msgstr ""
2706 " Name: ldapdb\n"
2707 " Driver: LDAP\n"
2708 " Readonly: true\n"
2709 " Server: example.com\n"
2710 " BaseDN: cn=debconf,dc=example,dc=com\n"
2711 " KeyByKey: 0\n"
2712
2713 #. type: Plain text
2714 #: debconf.conf.5:294
2715 msgid ""
2716 "Another example, this time the LDAP database is on localhost, and can be "
2717 "written to:"
2718 msgstr ""
2719 "Un alt exemplu, de data aceasta baza de date LDAP este pe localhost și se "
2720 "poate scrie în ea:"
2721
2722 #. type: Plain text
2723 #: debconf.conf.5:301
2724 #, no-wrap
2725 msgid ""
2726 " Name: ldapdb\n"
2727 " Driver: LDAP\n"
2728 " Server: localhost\n"
2729 " BaseDN: cn=debconf,dc=domain,dc=com\n"
2730 " BindPasswd: secret\n"
2731 " KeyByKey: 1\n"
2732 msgstr ""
2733 " Name: ldapdb\n"
2734 " Driver: LDAP\n"
2735 " Server: localhost\n"
2736 " BaseDN: cn=debconf,dc=domain,dc=com\n"
2737 " BindPasswd: secret\n"
2738 " KeyByKey: 1\n"
2739
2740 #. type: TP
2741 #: debconf.conf.5:302
2742 #, no-wrap
2743 msgid "B<Pipe>"
2744 msgstr "B<Pipe>"
2745
2746 #. type: Plain text
2747 #: debconf.conf.5:307
2748 msgid ""
2749 "This special-purpose database driver reads and writes the database from "
2750 "standard input/output. It may be useful for people with special needs."
2751 msgstr ""
2752 "Acest sistem de control de bază de date cu scop special citește și scrie "
2753 "baza de date de la intrarea/ieșirea standard. Poate fi util pentru "
2754 "persoanele cu nevoi speciale."
2755
2756 #. type: Plain text
2757 #: debconf.conf.5:314
2758 msgid ""
2759 "The format to read and write. See FORMATS below. Defaults to using a rfc-822 "
2760 "like format."
2761 msgstr ""
2762 "Formatul pentru citire și scriere. Consultați secțiunea FORMATE de mai jos. "
2763 "În mod implicit se utilizează un format asemănător formatului rfc-822."
2764
2765 #. type: TP
2766 #: debconf.conf.5:314
2767 #, no-wrap
2768 msgid "B<Infd>"
2769 msgstr "B<Infd>"
2770
2771 #. type: Plain text
2772 #: debconf.conf.5:318
2773 msgid ""
2774 "File descriptor number to read from. Defaults to reading from stdin. If set "
2775 "to \"none\", the database will not read any data on startup."
2776 msgstr ""
2777 "Numărul descriptorului de fișier din care se citește. Valoarea implicită "
2778 "este citirea de la intrarea standard. Dacă este definit la „none”, baza de "
2779 "date nu va citi niciun fel de date la pornire."
2780
2781 #. type: TP
2782 #: debconf.conf.5:318
2783 #, no-wrap
2784 msgid "B<Outfd>"
2785 msgstr "B<Outfd>"
2786
2787 #. type: Plain text
2788 #: debconf.conf.5:322
2789 msgid ""
2790 "File descriptor number to write to. Defaults to writing to stdout. If set to "
2791 "\"none\", the database will be thrown away on shutdown."
2792 msgstr ""
2793 "Numărul descriptorului de fișier în care se scrie. În mod implicit, se scrie "
2794 "la ieșirea standard. Dacă este definit la „none”, baza de date va fi "
2795 "înlăturată la închidere."
2796
2797 #. type: Plain text
2798 #: debconf.conf.5:326
2799 msgid "That's all of the real drivers, now moving on to meta-drivers.."
2800 msgstr ""
2801 "Aceștia sunt toate sistemele control reale, acum trecem la meta-sistemele de "
2802 "control."
2803
2804 #. type: TP
2805 #: debconf.conf.5:326 debconf.conf.5:354
2806 #, no-wrap
2807 msgid "B<Stack>"
2808 msgstr "B<Stack>"
2809
2810 #. type: Plain text
2811 #: debconf.conf.5:335
2812 msgid ""
2813 "This driver stacks up a number of other databases (of any type), and allows "
2814 "them to be accessed as one. When debconf asks for a value, the first "
2815 "database on the stack that contains the value returns it. If debconf writes "
2816 "something to the database, the write normally goes to the first driver on "
2817 "the stack that has the item debconf is modifying, and if none do, the new "
2818 "item is added to the first writable database on the stack."
2819 msgstr ""
2820 "Acest sistem de control stivuiește un număr de alte baze de date (de orice "
2821 "tip) și le permite să fie accesate ca una singură. Atunci când debconf "
2822 "solicită o valoare, prima bază de date din stivă care conține valoarea o "
2823 "returnează. Dacă debconf scrie ceva în baza de date, scrierea se face în mod "
2824 "normal în primul sistem de control din stivă care are elementul pe care "
2825 "debconf îl modifică, iar dacă nu există niciunul, noul element este adăugat "
2826 "la prima bază de date din stivă care poate fi scrisă."
2827
2828 #. type: Plain text
2829 #: debconf.conf.5:343
2830 msgid ""
2831 "Things become more interesting if one of the databases on the stack is "
2832 "readonly. Consider a stack of the databases foo, bar, and baz, where foo and "
2833 "baz are both readonly. Debconf wants to change an item, and this item is "
2834 "only present in baz, which is readonly. The stack driver is smart enough to "
2835 "realize that won't work, and it will copy the item from baz to bar, and the "
2836 "write will take place in bar. Now the item in baz is shadowed by the item in "
2837 "bar, and it will not longer be visible to debconf."
2838 msgstr ""
2839 "Lucrurile devin mai interesante dacă una dintre bazele de date din stivă "
2840 "este numai-pentru-citire. „readonly”. Luați în considerare o stivă de baze "
2841 "de date I<foo>, I<bar> și I<baz>, unde I<foo> și I<baz> sunt ambele numai-"
2842 "pentru-citire. Debconf dorește să schimbe un element, iar acest element este "
2843 "prezent doar în I<baz>, care este numai-pentru-citire. Sistemul de control "
2844 "de stivă „stack” este suficient de inteligent pentru a realiza că nu va "
2845 "funcționa și va copia elementul din I<baz> în I<bar>, iar scrierea va avea "
2846 "loc în I<bar>. Acum elementul din I<baz> este umbrit de elementul din I<bar> "
2847 "și nu va mai fi vizibil pentru debconf."
2848
2849 #. type: Plain text
2850 #: debconf.conf.5:350
2851 msgid ""
2852 "This kind of thing is particularly useful if you want to point many systems "
2853 "at a central, readonly database, while still allowing things to be "
2854 "overridden on each system. When access controls are added to the picture, "
2855 "stacks allow you to do many other interesting things, like redirect all "
2856 "passwords to one database while a database underneath it handles everything "
2857 "else."
2858 msgstr ""
2859 "Acest tip de lucru este deosebit de util în cazul în care doriți să "
2860 "direcționați mai multe sisteme către o bază de date centrală, numai pentru "
2861 "citire, permițând în același timp ca anumite lucruri să fie anulate pe "
2862 "fiecare sistem. Atunci când se adaugă controlul accesului, stivele vă permit "
2863 "să faceți multe alte lucruri interesante, cum ar fi redirecționarea tuturor "
2864 "parolelor către o bază de date, în timp ce o bază de date aflată sub aceasta "
2865 "se ocupă de orice altceva."
2866
2867 #. type: Plain text
2868 #: debconf.conf.5:352
2869 msgid "Only one piece of configuration is needed to set up a stack:"
2870 msgstr ""
2871 "Pentru a configura o stivă „stack” , este necesară o singură piesă de "
2872 "configurare:"
2873
2874 #. type: Plain text
2875 #: debconf.conf.5:358
2876 msgid ""
2877 "This is where you specify a list of other databases, by name, to tell it "
2878 "what makes up the stack."
2879 msgstr ""
2880 "Aici specificați o listă de alte baze de date, după nume, pentru a-i spune "
2881 "ce alcătuiește stiva."
2882
2883 #. type: Plain text
2884 #: debconf.conf.5:361 debconf.conf.5:387
2885 msgid "For example:"
2886 msgstr "De exemplu:"
2887
2888 #. type: Plain text
2889 #: debconf.conf.5:365
2890 #, no-wrap
2891 msgid ""
2892 " Name: megadb\n"
2893 " Driver: stack\n"
2894 " Stack: passworddb, configdb, companydb\n"
2895 msgstr ""
2896 " Name: megadb\n"
2897 " Driver: stack\n"
2898 " Stack: passworddb, configdb, companydb\n"
2899
2900 #. type: Plain text
2901 #: debconf.conf.5:368
2902 msgid ""
2903 "WARNING: The stack driver is not very well tested yet. Use at your own risk."
2904 msgstr ""
2905 "AVERTISMENT: Sistemul de control de stivă „stack” nu este încă foarte bine "
2906 "testat. Utilizați-l pe propriul risc."
2907
2908 #. type: Plain text
2909 #: debconf.conf.5:374
2910 msgid ""
2911 "This driver passes all requests on to another database driver. But it also "
2912 "copies all write requests to a backup database driver."
2913 msgstr ""
2914 "Acest sistem de control transmite toate cererile către un alt sistem de "
2915 "control de bază de date. Dar, de asemenea, copiază toate cererile de scriere "
2916 "către un sistem de control de bază de date de rezervă."
2917
2918 #. type: Plain text
2919 #: debconf.conf.5:376 debconf.conf.5:400
2920 msgid "You must specify the following fields to set up this driver:"
2921 msgstr ""
2922 "Trebuie să specificați următoarele câmpuri pentru a configura acest sistem "
2923 "de control de baze de date:"
2924
2925 #. type: TP
2926 #: debconf.conf.5:378 debconf.conf.5:402
2927 #, no-wrap
2928 msgid "B<Db>"
2929 msgstr "B<Db>"
2930
2931 #. type: Plain text
2932 #: debconf.conf.5:381 debconf.conf.5:405
2933 msgid "The database to read from and write to."
2934 msgstr "Baza de date din care se citește și în care se scrie."
2935
2936 #. type: TP
2937 #: debconf.conf.5:381
2938 #, no-wrap
2939 msgid "B<Backupdb>"
2940 msgstr "B<Backupdb>"
2941
2942 #. type: Plain text
2943 #: debconf.conf.5:384
2944 msgid "The name of the database to send copies of writes to."
2945 msgstr "Numele bazei de date către care se trimit copii ale scrierilor."
2946
2947 #. type: Plain text
2948 #: debconf.conf.5:392
2949 #, no-wrap
2950 msgid ""
2951 " Name: backup\n"
2952 " Driver: Backup\n"
2953 " Db: mydb\n"
2954 " Backupdb: mybackupdb\n"
2955 msgstr ""
2956 " Name: backup\n"
2957 " Driver: Backup\n"
2958 " Db: mydb\n"
2959 " Backupdb: mybackupdb\n"
2960
2961 #. type: Plain text
2962 #: debconf.conf.5:398
2963 msgid ""
2964 "This driver passes all requests on to another database driver, outputting "
2965 "verbose debugging output about the request and the result."
2966 msgstr ""
2967 "Acest sistem de control transmite toate cererile către un alt sistem de "
2968 "control de bază de date, generând un rezultat de depanare detaliat cu "
2969 "privire la cerere și la rezultat."
2970
2971 #. type: SH
2972 #: debconf.conf.5:407
2973 #, no-wrap
2974 msgid "ACCESS CONTROLS"
2975 msgstr "CONTROLUL ACCESULUI"
2976
2977 #. type: Plain text
2978 #: debconf.conf.5:411
2979 msgid ""
2980 "When you set up a database, you can also use some fields to specify access "
2981 "controls. You can specify that a database only accepts passwords, for "
2982 "example, or make a database only accept things with \"foo\" in their name."
2983 msgstr ""
2984 "Atunci când configurați o bază de date, puteți, de asemenea, să utilizați "
2985 "anumite câmpuri pentru a specifica controlul accesului. De exemplu, puteți "
2986 "specifica că o bază de date acceptă numai parole sau că o bază de date "
2987 "acceptă numai lucruri cu „foo” în nume."
2988
2989 #. type: TP
2990 #: debconf.conf.5:411
2991 #, no-wrap
2992 msgid "B<Readonly>"
2993 msgstr "B<Readonly>"
2994
2995 #. type: Plain text
2996 #: debconf.conf.5:416
2997 msgid ""
2998 "As was mentioned earlier, this access control, if set to \"true\", makes a "
2999 "database readonly. Debconf will read values from it, but will never write "
3000 "anything to it."
3001 msgstr ""
3002 "După cum s-a menționat mai înainte, acest control de acces, dacă este "
3003 "stabilit la „true”, face ca o bază de date să fie de tip „readonly”, numai-"
3004 "pentru-citire. Debconf va citi valori din aceasta, dar nu va scrie niciodată "
3005 "nimic în ea."
3006
3007 #. type: TP
3008 #: debconf.conf.5:416
3009 #, no-wrap
3010 msgid "B<Accept-Name>"
3011 msgstr "B<Accept-Name>"
3012
3013 #. type: Plain text
3014 #: debconf.conf.5:422
3015 msgid ""
3016 "The text in this field is a perl-compatible regular expression that is "
3017 "matched against the names of items as they are requested from the database. "
3018 "Only if an items name matches the regular expression, will the database "
3019 "allow debconf to access or modify it."
3020 msgstr ""
3021 "Textul din acest câmp este o expresie regulată compatibilă perl care este "
3022 "comparată cu numele elementelor pe măsură ce acestea sunt solicitate din "
3023 "baza de date. Numai dacă numele unui element corespunde expresiei regulate, "
3024 "baza de date va permite debconf să îl acceseze sau să îl modifice."
3025
3026 #. type: TP
3027 #: debconf.conf.5:422
3028 #, no-wrap
3029 msgid "B<Reject-Name>"
3030 msgstr "B<Reject-Name>"
3031
3032 #. type: Plain text
3033 #: debconf.conf.5:426
3034 msgid ""
3035 "Like Accept-Name, except any item name matching this regular expression will "
3036 "be rejected."
3037 msgstr ""
3038 "La fel ca Accept-Name, cu excepția faptului că orice nume de element care "
3039 "corespunde acestei expresii regulate va fi respins."
3040
3041 #. type: TP
3042 #: debconf.conf.5:426
3043 #, no-wrap
3044 msgid "B<Accept-Type>"
3045 msgstr "B<Accept-Type>"
3046
3047 #. type: Plain text
3048 #: debconf.conf.5:431
3049 msgid ""
3050 "Another regular expression, this matches against the type of the item that "
3051 "is being accessed. Only if the type matches the regex will access be granted."
3052 msgstr ""
3053 "O altă expresie regulată, aceasta se potrivește cu tipul elementului care "
3054 "este accesat. Accesul va fi permis numai dacă tipul corespunde expresiei "
3055 "regulate."
3056
3057 #. type: TP
3058 #: debconf.conf.5:431
3059 #, no-wrap
3060 msgid "B<Reject-Type>"
3061 msgstr "B<Reject-Type>"
3062
3063 #. type: Plain text
3064 #: debconf.conf.5:435
3065 msgid ""
3066 "Like Accept-Type, except any type matching this regular expression will be "
3067 "rejected."
3068 msgstr ""
3069 "La fel ca Accept-Type, cu excepția faptului că orice tip care corespunde "
3070 "acestei expresii regulate va fi respins."
3071
3072 #. type: SH
3073 #: debconf.conf.5:435
3074 #, no-wrap
3075 msgid "FORMATS"
3076 msgstr "FORMATE"
3077
3078 #. type: Plain text
3079 #: debconf.conf.5:439
3080 msgid ""
3081 "Some of the database drivers use format modules to control the actual format "
3082 "in which the database is stored on disk. These formats are currently "
3083 "supported:"
3084 msgstr ""
3085 "Unele dintre sistemele de control de baze de date utilizează module de "
3086 "format pentru a controla formatul real în care baza de date este stocată pe "
3087 "disc. Acestea sunt formatele acceptate în prezent:"
3088
3089 #. type: TP
3090 #: debconf.conf.5:439
3091 #, no-wrap
3092 msgid "B<822>"
3093 msgstr "B<822>"
3094
3095 #. type: Plain text
3096 #: debconf.conf.5:444
3097 msgid ""
3098 "This is a file format loosely based upon the rfc-822 format for email "
3099 "message headers. Similar formats are used throughout Debian; in the dpkg "
3100 "status file, and so on."
3101 msgstr ""
3102 "Acesta este un format de fișier bazat în mare măsură pe formatul rfc-822 "
3103 "pentru antetele mesajelor de poștă electronică. Formate similare sunt "
3104 "folosite în cadrul Debian; în fișierul de stare (status) dpkg, și așa mai "
3105 "departe."
3106
3107 #. type: Plain text
3108 #: debconf.conf.5:446
3109 msgid "Here is a more complicated example of a debconf.conf file."
3110 msgstr "Iată un exemplu mai complicat de fișier debconf.conf."
3111
3112 #. type: Plain text
3113 #: debconf.conf.5:452
3114 #, no-wrap
3115 msgid ""
3116 " # This stanza is used for general debconf setup.\n"
3117 " Config: stack\n"
3118 " Templates: templates\n"
3119 " Log: developer\n"
3120 " Debug: developer\n"
3121 msgstr ""
3122 " # Această strofă este utilizată pentru configurarea\n"
3123 " # generală a debconf.\n"
3124 " Config: stack\n"
3125 " Templates: templates\n"
3126 " Log: developer\n"
3127 " Debug: developer\n"
3128
3129 #. type: Plain text
3130 #: debconf.conf.5:457
3131 #, no-wrap
3132 msgid ""
3133 " # This is my own local database.\n"
3134 " Name: mydb\n"
3135 " Driver: DirTree\n"
3136 " Directory: /var/cache/debconf/config\n"
3137 msgstr ""
3138 " # Aceasta este propria mea bază de date locală.\n"
3139 " Name: mydb\n"
3140 " Driver: DirTree\n"
3141 " Directory: /var/cache/debconf/config\n"
3142
3143 #. type: Plain text
3144 #: debconf.conf.5:469
3145 #, no-wrap
3146 msgid ""
3147 " # This is another database that I use to hold\n"
3148 " # only X server configuration.\n"
3149 " Name: X\n"
3150 " Driver: File\n"
3151 " Filename: /etc/X11/debconf.dat\n"
3152 " Mode: 644\n"
3153 " # It's sorta hard to work out what questions\n"
3154 " # belong to X; it should be using a deeper\n"
3155 " # tree structure so I could just match on ^X/\n"
3156 " # Oh well.\n"
3157 " Accept-Name: xserver|xfree86|xbase\n"
3158 msgstr ""
3159 " # Aceasta este o altă bază de date pe care o folosesc\n"
3160 " # pentru a păstra doar configurația serverului X.\n"
3161 " Name: X\n"
3162 " Driver: File\n"
3163 " Filename: /etc/X11/debconf.dat\n"
3164 " Mode: 644\n"
3165 " # Este cam greu să-mi dau seama ce întrebări\n"
3166 " # aparțin lui X; ar trebui să folosească o structură\n"
3167 " # arborescentă mai profundă, astfel încât să pot\n"
3168 " # face potrivire doar pentru ^X/\n"
3169 " # În fine.\n"
3170 " Accept-Name: xserver|xfree86|xbase\n"
3171
3172 #. type: Plain text
3173 #: debconf.conf.5:485
3174 #, no-wrap
3175 msgid ""
3176 " # This is our company's global, read-only\n"
3177 " # (for me!) debconf database.\n"
3178 " Name: company\n"
3179 " Driver: LDAP\n"
3180 " Server: debconf.foo.com\n"
3181 " BaseDN: cn=debconf,dc=foo,dc=com\n"
3182 " BindDN: uid=admin,dc=foo,dc=com\n"
3183 " BindPasswd: secret\n"
3184 " Readonly: true\n"
3185 " # I don't want any passwords that might be\n"
3186 " # floating around in there.\n"
3187 " Reject-Type: password\n"
3188 " # If this db is not accessible for whatever\n"
3189 " # reason, carry on anyway.\n"
3190 " Required: false\n"
3191 msgstr ""
3192 " # Aceasta este baza de date debconf globală,\n"
3193 " # numai-citire (pentru mine!) a companiei noastre.\n"
3194 " Name: company\n"
3195 " Driver: LDAP\n"
3196 " Server: debconf.foo.com\n"
3197 " BaseDN: cn=debconf,dc=foo,dc=com\n"
3198 " BindDN: uid=admin,dc=foo,dc=com\n"
3199 " BindPasswd: secret\n"
3200 " Readonly: true\n"
3201 " # Nu vreau nicio parolă care ar putea\n"
3202 " # să se afle pe acolo.\n"
3203 " Reject-Type: password\n"
3204 " # Dacă această BD nu este accesibilă\n"
3205 " # din orice motiv, continuă oricum.\n"
3206 " Required: false\n"
3207
3208 #. type: Plain text
3209 #: debconf.conf.5:493
3210 #, no-wrap
3211 msgid ""
3212 " # I use this database to hold\n"
3213 " # passwords safe and secure.\n"
3214 " Name: passwords\n"
3215 " Driver: File\n"
3216 " Filename: /etc/debconf/passwords\n"
3217 " Mode: 600\n"
3218 " Accept-Type: password\n"
3219 msgstr ""
3220 " # Folosesc această bază de date\n"
3221 " # pentru a păstra parolele în siguranță.\n"
3222 " Name: passwords\n"
3223 " Driver: File\n"
3224 " Filename: /etc/debconf/passwords\n"
3225 " Mode: 600\n"
3226 " Accept-Type: password\n"
3227
3228 #. type: Plain text
3229 #: debconf.conf.5:506
3230 #, no-wrap
3231 msgid ""
3232 " # Let's put them all together\n"
3233 " # in a database stack.\n"
3234 " Name: stack\n"
3235 " Driver: Stack\n"
3236 " Stack: passwords, X, mydb, company\n"
3237 " # So, all passwords go to the password database.\n"
3238 " # Most X configuration stuff goes to the X\n"
3239 " # database, and anything else goes to my main\n"
3240 " # database. Values are looked up in each of those\n"
3241 " # in turn, and if none has a particular value, it\n"
3242 " # is looked up in the company-wide LDAP database\n"
3243 " # (unless it's a password).\n"
3244 msgstr ""
3245 " # Să le punem pe toate împreună într-o bază de date.\n"
3246 " # in a database stack.\n"
3247 " Name: stack\n"
3248 " Driver: Stack\n"
3249 " Stack: passwords, X, mydb, company\n"
3250 " # Astfel, toate parolele ajung în baza de date a parolelor.\n"
3251 " # Cele mai multe lucruri legate de configurarea X se duc\n"
3252 " # în baza de date X, iar orice altceva se duce în baza mea\n"
3253 " # de date principală. Valorile sunt căutate pe rând în fiecare\n"
3254 " # dintre acestea, iar dacă niciuna nu are o anumită valoare,\n"
3255 " # aceasta este căutată în baza de date LDAP a întregii\n"
3256 " # companii (cu excepția cazului în care este o parolă).\n"
3257
3258 #. type: Plain text
3259 #: debconf.conf.5:514
3260 #, no-wrap
3261 msgid ""
3262 " # A database is also used to hold templates. We\n"
3263 " # don't need to make this as fancy.\n"
3264 " Name: templates\n"
3265 " Driver: File\n"
3266 " Mode: 644\n"
3267 " Format: 822\n"
3268 " Filename: /var/cache/debconf/templates\n"
3269 msgstr ""
3270 " # O bază de date este, de asemenea, utilizată pentru\n"
3271 " # a păstra șabloanele. Nu este nevoie să o facem\n"
3272 " # la fel de sofisticată.\n"
3273 " Name: templates\n"
3274 " Driver: File\n"
3275 " Mode: 644\n"
3276 " Format: 822\n"
3277 " Filename: /var/cache/debconf/templates\n"
3278
3279 #. type: SH
3280 #: debconf.conf.5:514 confmodule.3:22
3281 #, no-wrap
3282 msgid "NOTES"
3283 msgstr "NOTE"
3284
3285 #. type: Plain text
3286 #: debconf.conf.5:517
3287 msgid ""
3288 "If you use something like ${HOME} in this file, it will be replaced with the "
3289 "value of the named environment variable."
3290 msgstr ""
3291 "Dacă utilizați ceva de genul ${HOME} în acest fișier, aceasta va fi "
3292 "înlocuită cu valoarea variabilei de mediu numită."
3293
3294 #. type: Plain text
3295 #: debconf.conf.5:521
3296 msgid ""
3297 "Environment variables can also be used to override the databases on the fly, "
3298 "see B<debconf>(7)"
3299 msgstr ""
3300 "Variabilele de mediu pot fi de asemenea utilizate pentru a suprascrie bazele "
3301 "de date din mers, a se vedea B<debconf>(7)"
3302
3303 #. type: Plain text
3304 #: debconf.conf.5:524
3305 msgid ""
3306 "The field names (the part of the line before the colon) is case-insensitive. "
3307 "The values, though, are case sensitive."
3308 msgstr ""
3309 "Numele câmpurilor (partea de linie înainte de două puncte) nu sunt sensibile "
3310 "la majuscule. Valorile, însă, sunt sensibile la majuscule."
3311
3312 #. type: SH
3313 #: debconf.conf.5:524
3314 #, no-wrap
3315 msgid "PLANNED ENHANCEMENTS"
3316 msgstr "ÎMBUNĂTĂȚIRI PLANIFICATE"
3317
3318 #. type: Plain text
3319 #: debconf.conf.5:533
3320 msgid ""
3321 "More drivers and formats. Some ideas include: A SQL driver, with the "
3322 "capability to access a remote database. A DHCP driver, that makes available "
3323 "some special things like hostname, IP address, and DNS servers. A driver "
3324 "that pulls values out of public DNS records TXT fields. A format that is "
3325 "compatible with the output of cdebconf. An override driver, which can "
3326 "override the value field or flags of all requests that pass through it."
3327 msgstr ""
3328 "Mai multe sisteme de control și formate. Unele idei includ: un sistem de "
3329 "control „SQL”, cu capacitatea de a accesa o bază de date la distanță. Un "
3330 "sistem de control „DHCP,” care pune la dispoziție unele lucruri speciale, "
3331 "cum ar fi numele de gazdă, adresa IP și serverele DNS. Un sistem de control "
3332 "care extrage valori din câmpurile TXT ale înregistrărilor DNS publice. Un "
3333 "format care este compatibil cu rezultatul cdebconf. Un sistem de control de "
3334 "suprascriere, care poate suprascrie câmpul de valori sau fanioanele tuturor "
3335 "cererilor care trec prin el."
3336
3337 #. type: SH
3338 #: debconf.conf.5:533
3339 #, no-wrap
3340 msgid "FILES"
3341 msgstr "FIȘIERE"
3342
3343 #. type: Plain text
3344 #: debconf.conf.5:535
3345 msgid "/etc/debconf.conf"
3346 msgstr "/etc/debconf.conf"
3347
3348 #. type: Plain text
3349 #: debconf.conf.5:537
3350 msgid "~/.debconfrc"
3351 msgstr "~/.debconfrc"
3352
3353 #. type: Plain text
3354 #: debconf.conf.5:539
3355 msgid "B<debconf>(7)"
3356 msgstr "B<debconf>(7)"
3357
3358 #. type: Plain text
3359 #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969
3360 msgid "Joey Hess E<lt>[email protected]<gt>"
3361 msgstr "Joey Hess E<lt>[email protected]<gt>"
3362
3363 #. type: TH
3364 #: confmodule.3:1
3365 #, no-wrap
3366 msgid "CONFMODULE"
3367 msgstr "CONFMODULE"
3368
3369 #. type: Plain text
3370 #: confmodule.3:4
3371 msgid "confmodule - communicate with Debian configuration system FrontEnd."
3372 msgstr "confmodule - comunică cu interfața sistemului de configurare Debian"
3373
3374 #. type: Plain text
3375 #: confmodule.3:12
3376 #, no-wrap
3377 msgid ""
3378 " #!/bin/sh -e\n"
3379 " . /usr/share/debconf/confmodule\n"
3380 " db_version 2.0\n"
3381 " db_capb 'backup'\n"
3382 " CAPB=$RET\n"
3383 " db_input 'foo/bar' || true\n"
3384 " db_go || true\n"
3385 msgstr ""
3386 " #!/bin/sh -e\n"
3387 " . /usr/share/debconf/confmodule\n"
3388 " db_version 2.0\n"
3389 " db_capb 'backup'\n"
3390 " CAPB=$RET\n"
3391 " db_input 'foo/bar' || true\n"
3392 " db_go || true\n"
3393
3394 #. type: Plain text
3395 #: confmodule.3:22
3396 msgid ""
3397 "This is a library of shell functions that eases communication with Debian's "
3398 "configuration management system. It can communicate with a FrontEnd via the "
3399 "debconf protocol. The design is that each command in the protocol is "
3400 "represented by one function in this module. The functionname is the same as "
3401 "the command, except it is prefixed with \"db_\" and is lower-case. Call the "
3402 "function and pass in any parameters you want to follow the command. Any "
3403 "textual return code from the FrontEnd will be returned to you in the $RET "
3404 "variable, while the numeric return code from the FrontEnd will be returned "
3405 "as a return code (and so those return codes must be captured or ignored)."
3406 msgstr ""
3407 "Aceasta este o bibliotecă de funcții shell care facilitează comunicarea cu "
3408 "sistemul de gestionare a configurației Debian. Poate comunica cu o interfață "
3409 "prin protocolul debconf. Conceptul este că fiecare comandă din protocol este "
3410 "reprezentată de o funcție în acest modul. Numele funcției este același cu al "
3411 "comenzii, cu excepția faptului că este prefixat cu „db_” și este scris cu "
3412 "minuscule. Apelați la funcție și introduceți orice parametru care urmează "
3413 "comenzii. Orice cod de returnare textual de la interfață vă va fi returnat "
3414 "în variabila $RET, în timp ce codul de returnare numeric de la interfață va "
3415 "fi returnat ca un cod de returnare (și astfel aceste coduri de returnare "
3416 "trebuie capturate sau ignorate)."
3417
3418 #. type: Plain text
3419 #: confmodule.3:29
3420 #, no-wrap
3421 msgid ""
3422 "Once this library is loaded, any text you later output will go to standard\n"
3423 "error, rather than standard output. This is a good thing in general, because\n"
3424 "text sent to standard output is interpreted by the FrontEnd as commands. If\n"
3425 "you do want to send a command directly to the FrontEnd, you must output it\n"
3426 "to file descriptor 3, like this:\n"
3427 " echo GET foo/bar E<gt>&3\n"
3428 msgstr ""
3429 "Odată ce această bibliotecă este încărcată, orice text pe care îl scoateți\n"
3430 "ulterior va fi trimis la ieșirea de eroare standard, în loc de la ieșirea\n"
3431 "standard. Acesta este un lucru bun în general, deoarece textul trimis la\n"
3432 "ieșirea standard este interpretat de interfață ca o comandă. Dacă doriți să\n"
3433 "trimiteți o comandă direct către interfață, trebuie să o trimiteți la\n"
3434 "descriptorul de fișier 3, astfel:\n"
3435 " echo GET foo/bar E<gt>&3\n"
3436
3437 #. type: Plain text
3438 #: confmodule.3:36
3439 msgid ""
3440 "The library checks to make sure it is actually speaking to a FrontEnd by "
3441 "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is "
3442 "assumed to be running. If not, the library turns into one, and runs a copy "
3443 "of the script that loaded the library connected to it. This means that if "
3444 "you source this library, you should do so very near to the top of your "
3445 "script, because everything before the sourcing of the library may well be "
3446 "run again."
3447 msgstr ""
3448 "Biblioteca verifică dacă comunică efectiv cu o interfață prin examinarea "
3449 "variabilei DEBIAN_HAS_FRONTEND. Dacă aceasta este definită, se presupune că "
3450 "rulează o interfață. Dacă nu, biblioteca se transformă într-una și rulează o "
3451 "copie a scriptului care a încărcat biblioteca conectată la ea. Aceasta "
3452 "înseamnă că, dacă obțineți sursa acestei biblioteci, ar trebui să o faceți "
3453 "foarte aproape de partea de sus a scriptului, deoarece este foarte posibil "
3454 "ca tot ceea ce precede obținerea sursei bibliotecii să fie executat din nou."
3455
3456 #. type: Plain text
3457 #: confmodule.3:42
3458 msgid ""
3459 "B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
3460 "debconf_specification in the debian-policy package"
3461 msgstr ""
3462 "B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
3463 "debconf_specification în pachetul debian-policy"
3464
3465 #. type: TH
3466 #: debconf.7:1
3467 #, no-wrap
3468 msgid "DEBCONF"
3469 msgstr "DEBCONF"
3470
3471 #. type: Plain text
3472 #: debconf.7:4
3473 msgid "debconf - Debian package configuration system"
3474 msgstr "debconf - sistemul de configurare a pachetelor Debian"
3475
3476 #. type: Plain text
3477 #: debconf.7:8
3478 msgid ""
3479 "Debconf is a configuration system for Debian packages. There is a rarely-"
3480 "used command named debconf, documented in B<debconf>(1)"
3481 msgstr ""
3482 "Debconf este un sistem de configurare pentru pachetele Debian. Există o "
3483 "comandă rar utilizată numită debconf, documentată în B<debconf>(1)"
3484
3485 #. type: Plain text
3486 #: debconf.7:16
3487 msgid ""
3488 "Debconf provides a consistent interface for configuring packages, allowing "
3489 "you to choose from several user interface frontends. It supports "
3490 "preconfiguring packages before they are installed, which allows large "
3491 "installs and upgrades to ask you for all the necessary information up front, "
3492 "and then go do the work while you do something else. It lets you, if you're "
3493 "in a hurry, skip over less important questions and information while "
3494 "installing a package (and revisit it later)."
3495 msgstr ""
3496 "Debconf oferă o interfață consistentă pentru configurarea pachetelor, "
3497 "permițându-vă să alegeți din mai multe interfețe de utilizator. Aceasta "
3498 "oferă suport pentru preconfigurarea pachetelor înainte ca acestea să fie "
3499 "instalate, ceea ce permite instalărilor și actualizărilor de mari dimensiuni "
3500 "să vă ceară toate informațiile necesare în prealabil și apoi să facă treaba "
3501 "în timp ce dumneavoastră faceți altceva. Vă permite, dacă vă grăbiți, să "
3502 "săriți peste întrebările și informațiile mai puțin importante în timpul "
3503 "instalării unui pachet (și să reveniți asupra acestora mai târziu)."
3504
3505 #. type: SH
3506 #: debconf.7:16
3507 #, no-wrap
3508 msgid "Preconfiguring packages"
3509 msgstr "Preconfigurarea pachetelor"
3510
3511 #. type: Plain text
3512 #: debconf.7:22
3513 msgid ""
3514 "Debconf can configure packages before they are even installed onto your "
3515 "system. This is useful because it lets all the questions the packages are "
3516 "going to ask be asked at the beginning of an install, so the rest of the "
3517 "install can proceed while you are away getting a cup of coffee."
3518 msgstr ""
3519 "Debconf poate configura pachetele chiar înainte ca acestea să fie instalate "
3520 "în sistemul dumneavoastră. Acest lucru este util deoarece permite ca toate "
3521 "întrebările pe care pachetele le vor pune să fie adresate la începutul unei "
3522 "instalări, astfel încât restul instalării să poată continua în timp ce "
3523 "sunteți plecat să serviți o ceașcă de cafea."
3524
3525 #. type: Plain text
3526 #: debconf.7:27
3527 msgid ""
3528 "If you use apt (version 0.5 or above), and you have apt-utils installed, "
3529 "each package apt installs will be automatically preconfigured. This is "
3530 "controlled via I</etc/apt/apt.conf.d/70debconf>"
3531 msgstr ""
3532 "Dacă utilizați apt (versiunea 0.5 sau ulterioară) și aveți instalat apt-"
3533 "utils, fiecare pachet instalat de apt va fi preconfigurat automat. Acest "
3534 "lucru este controlat prin intermediul I</etc/apt/apt.conf.d/70debconf>"
3535
3536 #. type: Plain text
3537 #: debconf.7:33
3538 msgid ""
3539 "Sometimes you might want to preconfigure a package by hand, when you're not "
3540 "installing it with apt. You can use B<dpkg-preconfigure>(8) to do that, "
3541 "just pass it the filenames of the packages you want to preconfigure. You "
3542 "will need apt-utils installed for that to work."
3543 msgstr ""
3544 "Uneori s-ar putea să doriți să preconfigurați un pachet manual, atunci când "
3545 "nu îl instalați cu apt. Puteți utiliza B<dpkg-preconfigure>(8) pentru a face "
3546 "acest lucru, doar treceți-i numele de fișiere ale pachetelor pe care doriți "
3547 "să le preconfigurați. Veți avea nevoie de apt-utils instalat pentru ca acest "
3548 "lucru să funcționeze."
3549
3550 #. type: SH
3551 #: debconf.7:33
3552 #, no-wrap
3553 msgid "Reconfiguring packages"
3554 msgstr "Reconfigurarea pachetelor"
3555
3556 #. type: Plain text
3557 #: debconf.7:40
3558 msgid ""
3559 "Suppose you installed the package, and answered debconf's questions, but now "
3560 "that you've used it awhile, you realize you want to go back and change some "
3561 "of your answers. In the past, reinstalling a package was often the thing to "
3562 "do when you got in this situation, but when you reinstall the package, "
3563 "debconf seems to remember you have answered the questions, and doesn't ask "
3564 "them again (this is a feature)."
3565 msgstr ""
3566 "Să presupunem că ați instalat pachetul și ați răspuns la întrebările lui "
3567 "debconf, dar acum că l-ați folosit o vreme, vă dați seama că doriți să "
3568 "reveniți și să modificați unele dintre răspunsurile dumneavoastră. În "
3569 "trecut, reinstalarea unui pachet era adesea lucrul care trebuia făcut atunci "
3570 "când erați în această situație, dar atunci când reinstalați pachetul, "
3571 "debconf pare să își amintească că ați răspuns la întrebări și nu le mai pune "
3572 "din nou (aceasta este o caracteristică)."
3573
3574 #. type: Plain text
3575 #: debconf.7:44
3576 #, no-wrap
3577 msgid ""
3578 "Luckily, debconf makes it easy to reconfigure any package that uses it.\n"
3579 "Suppose you want to reconfigure debconf itself. Just run, as root:\n"
3580 " dpkg-reconfigure debconf\n"
3581 msgstr ""
3582 "Din fericire, debconf facilitează reconfigurarea oricărui pachet care îl utilizează. Să presupunem că doriți să reconfigurați chiar debconf. Trebuie doar să rulați, ca root:\n"
3583 " dpkg-reconfigure debconf\n"
3584
3585 #. type: Plain text
3586 #: debconf.7:49
3587 msgid ""
3588 "This will ask all the questions you saw when debconf was first installed. "
3589 "It may ask you other questions as well, since it asks even low priority "
3590 "questions that may have been skipped when the package was installed. You "
3591 "can use it on any other package that uses debconf, as well."
3592 msgstr ""
3593 "Aceasta va pune toate întrebările pe care le-ați văzut când debconf a fost "
3594 "instalat prima dată. Este posibil să vă pună și alte întrebări, deoarece "
3595 "pune chiar și întrebări cu prioritate scăzută care ar fi putut fi omise "
3596 "atunci când pachetul a fost instalat. Îl puteți utiliza și pe orice alt "
3597 "pachet care utilizează debconf."
3598
3599 #. type: SH
3600 #: debconf.7:49
3601 #, no-wrap
3602 msgid "Frontends"
3603 msgstr "Interfețe"
3604
3605 #. type: Plain text
3606 #: debconf.7:53
3607 msgid ""
3608 "One of debconf's unique features is that the interface it presents to you is "
3609 "only one of many, that can be swapped in at will. There are many debconf "
3610 "frontends available:"
3611 msgstr ""
3612 "Una dintre caracteristicile unice ale debconf este faptul că interfața pe "
3613 "care v-o prezintă este doar una dintre multe altele, care pot fi schimbate "
3614 "după bunul plac. Există multe interfețe debconf disponibile:"
3615
3616 #. type: TP
3617 #: debconf.7:53
3618 #, no-wrap
3619 msgid "B<dialog>"
3620 msgstr "B<dialog>"
3621
3622 #. type: Plain text
3623 #: debconf.7:60
3624 msgid ""
3625 "The default frontend, this uses the B<whiptail>(1) or B<dialog>(1) "
3626 "programs to display questions to you. It works in text mode."
3627 msgstr ""
3628 "Interfața implicită, aceasta utilizează programele B<whiptail>(1) sau "
3629 "B<dialog>(1) pentru a vă afișa întrebările. Aceasta funcționează în modul "
3630 "text."
3631
3632 #. type: TP
3633 #: debconf.7:60
3634 #, no-wrap
3635 msgid "B<readline>"
3636 msgstr "B<readline>"
3637
3638 #. type: Plain text
3639 #: debconf.7:72
3640 msgid ""
3641 "The most traditional frontend, this looks quite similar to how Debian "
3642 "configuration always has been: a series of questions, printed out at the "
3643 "console using plain text, and prompts done using the readline library. It "
3644 "even supports tab completion. The libterm-readline-gnu-perl package is "
3645 "strongly recommended if you chose to use this frontend; the default readline "
3646 "module does not support prompting with default values. At the minimum, "
3647 "you'll need the perl-modules package installed to use this frontend."
3648 msgstr ""
3649 "Cea mai tradițională interfață, aceasta arată destul de asemănător cu modul "
3650 "în care a fost întotdeauna configurarea Debian: o serie de întrebări, "
3651 "afișate la consolă folosind text simplu, și solicitări realizate folosind "
3652 "biblioteca readline. Oferă chiar și suport pentru completarea cu "
3653 "tabulatorul. Pachetul libterm-readline-gnu-perl este foarte recomandat dacă "
3654 "alegeți să utilizați această interfață; modulul readline implicit nu acceptă "
3655 "solicitarea cu valori implicite. Cel puțin, veți avea nevoie de pachetul "
3656 "perl-modules instalat pentru a utiliza această interfață."
3657
3658 #. type: Plain text
3659 #: debconf.7:77
3660 msgid ""
3661 "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to "
3662 "the previous question (if that is supported by the package that is using "
3663 "debconf), and pagedown (or ctrl-v) will skip forward to the next question."
3664 msgstr ""
3665 "Această interfață are câteva taste rapide speciale. «pageup» (sau «ctrl-u») "
3666 "va reveni la întrebarea anterioară (dacă pachetul care utilizează debconf "
3667 "acceptă acest lucru), iar «pagedown» (sau «ctrl-v») va trece la următoarea "
3668 "întrebare."
3669
3670 #. type: Plain text
3671 #: debconf.7:80
3672 msgid ""
3673 "This is the best frontend for remote admin work over a slow connection, or "
3674 "for those who are comfortable with unix."
3675 msgstr ""
3676 "Aceasta este cea mai bună interfață pentru munca de administrare de la "
3677 "distanță pe o conexiune lentă, sau pentru cei care se descurcă bine cu unix."
3678
3679 #. type: TP
3680 #: debconf.7:81
3681 #, no-wrap
3682 msgid "B<noninteractive>"
3683 msgstr "B<noninteractive>"
3684
3685 #. type: Plain text
3686 #: debconf.7:90
3687 msgid ""
3688 "This is the anti-frontend. It never interacts with you at all, and makes the "
3689 "default answers be used for all questions. It might mail error messages to "
3690 "root, but that's it; otherwise it is completely silent and unobtrusive, a "
3691 "perfect frontend for automatic installs. If you are using this front-end, "
3692 "and require non-default answers to questions, you will need to preseed the "
3693 "debconf database; see the section below on Unattended Package Installation "
3694 "for more details."
3695 msgstr ""
3696 "Aceasta este anti-interfața. Nu interacționează deloc cu dvs. și face ca "
3697 "răspunsurile implicite să fie utilizate pentru toate întrebările. Poate "
3698 "trimite mesaje de eroare către root, dar asta este tot; în rest, este "
3699 "complet silențioasă și discretă, o interfață perfectă pentru instalările "
3700 "automate. Dacă utilizați această interfață și aveți nevoie de răspunsuri la "
3701 "întrebări care nu sunt implicite, va trebui să preconfigurați baza de date "
3702 "debconf; consultați secțiunea de mai jos privind instalarea nesupravegheată "
3703 "a pachetelor pentru mai multe detalii."
3704
3705 #. type: TP
3706 #: debconf.7:90
3707 #, no-wrap
3708 msgid "B<gnome>"
3709 msgstr "B<gnome>"
3710
3711 #. type: Plain text
3712 #: debconf.7:96
3713 msgid ""
3714 "This is a modern X GUI using the gtk and gnome libraries. Of course, it "
3715 "requires a valid DISPLAY to work; debconf will fall back to other frontends "
3716 "if it can't work. Note that this frontend requires you have the libgtk3-perl "
3717 "package installed."
3718 msgstr ""
3719 "Aceasta este o interfață grafică X modernă care utilizează bibliotecile gtk "
3720 "și gnome. Desigur, necesită ca variabila de mediu DISPLAY să aibă o valoare "
3721 "validă pentru a funcționa; debconf se va întoarce la alte interfețe dacă nu "
3722 "poate funcționa. Rețineți că această interfață necesită să aveți instalat "
3723 "pachetul libgtk3-perl."
3724
3725 #. type: TP
3726 #: debconf.7:96
3727 #, no-wrap
3728 msgid "B<kde>"
3729 msgstr "B<kde>"
3730
3731 #. type: Plain text
3732 #: debconf.7:102
3733 msgid ""
3734 "This frontend provides a modern X GUI based on the KDE Platform. You of "
3735 "course need a DISPLAY to use this frontend and you must install debconf-kde-"
3736 "helper package. The frontend will fall back to dialog if some of the "
3737 "prerequisites are not met."
3738 msgstr ""
3739 "Această interfață oferă o interfață grafică X modernă bazată pe platforma "
3740 "KDE. Desigur, aveți nevoie ca variabila de mediu DISPLAY să aibă o valoare "
3741 "validă pentru a utiliza această interfață și trebuie să instalați pachetul "
3742 "debconf-kde-helper. Interfața va reveni la dialog dacă unele dintre "
3743 "condițiile prealabile nu sunt îndeplinite."
3744
3745 #. type: TP
3746 #: debconf.7:102
3747 #, no-wrap
3748 msgid "B<editor>"
3749 msgstr "B<editor>"
3750
3751 #. type: Plain text
3752 #: debconf.7:110
3753 msgid ""
3754 "This is for those fanatics who have to do everything in a text editor. It "
3755 "runs your editor on a file that looks something like a typical unix config "
3756 "file, and you edit the file to communicate with debconf. Debconf's author "
3757 "prefers to not comment regarding the circumstances that led to this frontend "
3758 "being written."
3759 msgstr ""
3760 "Aceasta este pentru acei fanatici care trebuie să facă totul într-un editor "
3761 "de text. Acesta rulează editorul dvs. preferat pe un fișier care seamănă cu "
3762 "un fișier de configurare unix tipic, iar dvs. editați fișierul pentru a "
3763 "comunica cu debconf. Autorul Debconf preferă să nu comenteze cu privire la "
3764 "circumstanțele care au dus la scrierea acestei interfețe."
3765
3766 #. type: TP
3767 #: debconf.7:110
3768 #, no-wrap
3769 msgid "B<web>"
3770 msgstr "B<web>"
3771
3772 #. type: Plain text
3773 #: debconf.7:120
3774 msgid ""
3775 "This frontend acts as a web server, that you connect to with your web "
3776 "browser, to browse the questions and answer them. It has a lot of promise, "
3777 "but is a little rough so far. When this frontend starts up, it will print "
3778 "out the location you should point your web browser to. You have to run the "
3779 "web browser on the same machine you are configuring, for security reasons."
3780 msgstr ""
3781 "Această interfață acționează ca un server web, la care vă conectați cu "
3782 "navigatorul dvs. web, pentru a parcurge întrebările și a răspunde la ele. "
3783 "Este foarte promițător, dar deocamdată este puțin greoi. Atunci când această "
3784 "interfață pornește, ea va afișa locația către care trebuie să îndreptați "
3785 "navigatorul dvs. web. Din motive de securitate, trebuie să executați "
3786 "navigatorul web pe aceeași mașină pe care o configurați."
3787
3788 #. type: Plain text
3789 #: debconf.7:126
3790 msgid ""
3791 "Do keep in mind that this is not a very secure frontend. Anyone who has "
3792 "access to the computer being configured can currently access the web server "
3793 "and configure things while this frontend is running. So this is more of a "
3794 "proof of concept than anything."
3795 msgstr ""
3796 "Țineți cont de faptul că aceasta nu este o interfață foarte sigură. Oricine "
3797 "are acces la calculatorul care este configurat poate accesa serverul web și "
3798 "configura lucrurile în timp ce această interfață rulează. Prin urmare, "
3799 "aceasta este mai mult o dovadă de concept decât orice altceva."
3800
3801 #. type: Plain text
3802 #: debconf.7:133
3803 #, no-wrap
3804 msgid ""
3805 "You can change the default frontend debconf uses by reconfiguring\n"
3806 "debconf. On the other hand, if you just want to change the frontend\n"
3807 "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n"
3808 "the name of the frontend to use. For example:\n"
3809 " DEBIAN_FRONTEND=readline apt-get install slrn\n"
3810 msgstr ""
3811 "Puteți schimba interfața implicită utilizată de debconf prin reconfigurarea debconf. Pe de altă parte, dacă doriți să schimbați interfața doar pentru un minut, puteți defini variabila de mediu DEBIAN_FRONTEND la numele interfeței de utilizat. De exemplu:\n"
3812 " DEBIAN_FRONTEND=readline apt-get install slrn\n"
3813
3814 #. type: Plain text
3815 #: debconf.7:141
3816 msgid ""
3817 "The B<dpkg-reconfigure>(8) and B<dpkg-preconfigure>(8) commands also let "
3818 "you pass I<--frontend=> to them, followed by the frontend you want them to "
3819 "use."
3820 msgstr ""
3821 "Comenzile B<dpkg-reconfigure>(8) și B<dpkg-preconfigure>(8) vă permit, de "
3822 "asemenea, să le pasați opțiunea I<--frontend=>, urmată de numele interfeței "
3823 "pe care doriți să o utilizeze."
3824
3825 #. type: Plain text
3826 #: debconf.7:145
3827 msgid ""
3828 "Note that not all frontends will work in all circumstances. If a frontend "
3829 "fails to start up for some reason, debconf will print out a message "
3830 "explaining why, and fall back to the next-most similar frontend."
3831 msgstr ""
3832 "Rețineți că nu toate interfețele vor funcționa în toate situațiile. Dacă o "
3833 "interfață nu reușește să pornească din anumite motive, debconf va afișa un "
3834 "mesaj explicând de ce și va trece la următoarea interfață similară."
3835
3836 #. type: SH
3837 #: debconf.7:145
3838 #, no-wrap
3839 msgid "Priorities"
3840 msgstr "Priorități"
3841
3842 #. type: Plain text
3843 #: debconf.7:152
3844 msgid ""
3845 "Another nice feature of debconf is that the questions it asks you are "
3846 "prioritized. If you don't want to be bothered about every little thing, you "
3847 "can set up debconf to only ask you the most important questions. On the "
3848 "other hand, if you are a control freak, you can make it show you all "
3849 "questions. Each question has a priority. In increasing order of importance:"
3850 msgstr ""
3851 "O altă caracteristică plăcută a debconf este că întrebările pe care vi le "
3852 "pune sunt prioritizate. Dacă nu doriți să fiți deranjat de fiecare lucru "
3853 "mărunt, puteți configura debconf să vă pună doar cele mai importante "
3854 "întrebări. Pe de altă parte, dacă sunteți obsedat de control, îl puteți face "
3855 "să vă arate toate întrebările. Fiecare întrebare are o prioritate. În "
3856 "ordinea crescătoare a importanței:"
3857
3858 #. type: TP
3859 #: debconf.7:152 debconf-devel.7:294
3860 #, no-wrap
3861 msgid "B<low>"
3862 msgstr "B<low>"
3863
3864 #. type: Plain text
3865 #: debconf.7:156
3866 msgid ""
3867 "Very trivial questions that have defaults that will work in the vast "
3868 "majority of cases."
3869 msgstr ""
3870 "Întrebări foarte banale care au valori implicite care vor funcționa în marea "
3871 "majoritate a cazurilor."
3872
3873 #. type: TP
3874 #: debconf.7:156 debconf-devel.7:298
3875 #, no-wrap
3876 msgid "B<medium>"
3877 msgstr "B<medium>"
3878
3879 #. type: Plain text
3880 #: debconf.7:159
3881 msgid "Normal questions that have reasonable defaults."
3882 msgstr "Întrebări normale care au valori implicite rezonabile."
3883
3884 #. type: TP
3885 #: debconf.7:159 debconf-devel.7:301
3886 #, no-wrap
3887 msgid "B<high>"
3888 msgstr "B<high>"
3889
3890 #. type: Plain text
3891 #: debconf.7:162
3892 msgid "Questions that don't have a reasonable default."
3893 msgstr "Întrebări care nu au un răspuns implicit rezonabil."
3894
3895 #. type: TP
3896 #: debconf.7:162 debconf-devel.7:304
3897 #, no-wrap
3898 msgid "B<critical>"
3899 msgstr "B<critical>"
3900
3901 #. type: Plain text
3902 #: debconf.7:165
3903 msgid "Questions that you really, really need to see (or else)."
3904 msgstr "Întrebări pe care trebuie să le vedeți cu adevărat (altfel...)."
3905
3906 #. type: Plain text
3907 #: debconf.7:175
3908 msgid ""
3909 "Only questions with a priority equal to or greater than the priority you "
3910 "choose will be shown to you. You can set the priority value by reconfiguring "
3911 "debconf, or temporarily by passing I<--priority=> followed by the value to "
3912 "the B<dpkg-reconfigure>(8) and B<dpkg-preconfigure>(8) commands, or by "
3913 "setting the DEBIAN_PRIORITY environment variable."
3914 msgstr ""
3915 "Vi se vor afișa numai întrebările cu o prioritate egală sau mai mare decât "
3916 "prioritatea aleasă. Puteți stabili valoarea priorității prin reconfigurarea "
3917 "debconf sau temporar, pasând I<--priority=> urmată de valoare, comenzilor "
3918 "B<dpkg-reconfigure>(8) și B<dpkg-preconfigure>(8), sau prin definirea "
3919 "variabilei de mediu DEBIAN_PRIORITY."
3920
3921 #. type: SH
3922 #: debconf.7:175
3923 #, no-wrap
3924 msgid "Backend Database"
3925 msgstr "Baza de date principală"
3926
3927 #. type: Plain text
3928 #: debconf.7:187
3929 msgid ""
3930 "Debconf uses a rather flexible and potentially complicated backend database "
3931 "for storing data such as the answers to questions. The file B</etc/"
3932 "debconf.conf> is used to configure this database. If you need to set up "
3933 "something complicated, like make debconf read a remote database to get "
3934 "defaults, with local overrides, read the B<debconf.conf>(5) man page for "
3935 "all the gory details. Generally, the backend database is located in B</var/"
3936 "cache/debconf/> ."
3937 msgstr ""
3938 "Debconf utilizează o bază de date principală destul de flexibilă și "
3939 "potențial complicată pentru stocarea datelor, cum ar fi răspunsurile la "
3940 "întrebări. Fișierul B</etc/debconf.conf> este utilizat pentru a configura "
3941 "această bază de date. Dacă trebuie să configurați ceva complicat, cum ar fi "
3942 "să faceți debconf să citească o bază de date de la distanță pentru a obține "
3943 "valorile implicite, cu suprapuneri locale, citiți pagina de manual "
3944 "B<debconf.conf>(5) pentru toate detaliile sângeroase. În general, baza de "
3945 "date principală este localizată în B</var/cache/debconf/> ."
3946
3947 #. type: SH
3948 #: debconf.7:187
3949 #, no-wrap
3950 msgid "Unattended Package Installation"
3951 msgstr "Instalarea nesupravegheată a pachetelor"
3952
3953 #. type: Plain text
3954 #: debconf.7:194
3955 msgid ""
3956 "If you have many machines to manage you will sometimes find yourself in the "
3957 "position of needing to perform an unattended installation or upgrade of "
3958 "packages on many systems, when the default answers to some configuration "
3959 "questions are not acceptable. There are many ways to approach this; all "
3960 "involve setting up a database and making debconf use it to get the answers "
3961 "you want."
3962 msgstr ""
3963 "Dacă aveți multe mașini de gestionat, vă veți afla uneori în situația de a "
3964 "trebui să efectuați o instalare sau o actualizare nesupravegheată a "
3965 "pachetelor pe mai multe sisteme, atunci când răspunsurile implicite la unele "
3966 "întrebări de configurare nu sunt acceptabile. Există mai multe moduri de a "
3967 "aborda această problemă; toate implică crearea unei baze de date și "
3968 "utilizarea acesteia de către debconf pentru a obține răspunsurile dorite."
3969
3970 #. type: Plain text
3971 #: debconf.7:198
3972 msgid ""
3973 "You should really read B<debconf.conf>(5) before this section, as you need "
3974 "to understand how debconf's databases work."
3975 msgstr ""
3976 "Ar trebui să citiți B<debconf.conf>(5) înainte de această secțiune, deoarece "
3977 "trebuie să înțelegeți cum funcționează bazele de date ale debconf."
3978
3979 #. type: Plain text
3980 #: debconf.7:205
3981 msgid ""
3982 "The easiest way to set up the database is to install the packages on one "
3983 "machine and answer their questions as usual. Or you might just use B<dpkg-"
3984 "preconfigure>(8) to configure a set of packages without actually installing "
3985 "them. Or you might even decide to write a plain text debconf database by "
3986 "hand or something."
3987 msgstr ""
3988 "Cel mai simplu mod de a configura baza de date este să instalați pachetele "
3989 "pe o mașină și să răspundeți la întrebările lor ca de obicei. Sau ați putea "
3990 "folosi B<dpkg-preconfigure>(8) pentru a configura un set de pachete fără a "
3991 "le instala efectiv. Sau ați putea decide chiar să scrieți manual o bază de "
3992 "date debconf în text simplu sau ceva de acest gen."
3993
3994 #. type: Plain text
3995 #: debconf.7:209
3996 msgid ""
3997 "Once you have the database, you need to figure out how to make the remote "
3998 "systems use it. This depends of course on the configuration of those systems "
3999 "and what database types they are set up to use."
4000 msgstr ""
4001 "Odată ce aveți baza de date, trebuie să vă dați seama cum să faceți "
4002 "sistemele la distanță să o utilizeze. Acest lucru depinde, desigur, de "
4003 "configurația acestor sisteme și de tipurile de baze de date pe care sunt "
4004 "configurate să le utilizeze."
4005
4006 #. type: Plain text
4007 #: debconf.7:213
4008 msgid ""
4009 "If you are using the LDAP debconf database, an entire network of debian "
4010 "machines can also have any or all package installation questions answered "
4011 "automatically by a single LDAP server."
4012 msgstr ""
4013 "Dacă utilizați baza de date debconf LDAP, un singur server LDAP poate "
4014 "răspunde automat la oricare sau la toate întrebările privind instalarea "
4015 "pachetelor pentru o întreagă rețea de mașini debian."
4016
4017 #. type: Plain text
4018 #: debconf.7:222
4019 msgid ""
4020 "But perhaps you're using something a little bit easier to set up like, say, "
4021 "the default debconf database configuration, or you just don't want your "
4022 "remote systems to use LDAP all the time. In this case the best approach is "
4023 "to temporarily configure the remote systems to stack your database "
4024 "underneath their own existing databases, so they pull default values out of "
4025 "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and "
4026 "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample "
4027 "use:"
4028 msgstr ""
4029 "Dar poate că utilizați ceva mai ușor de configurat, cum ar fi, de exemplu, "
4030 "configurația implicită a bazei de date debconf, sau pur și simplu nu doriți "
4031 "ca sistemele dvs. de la distanță să utilizeze LDAP tot timpul. În acest caz, "
4032 "cea mai bună abordare este să configurați temporar sistemele la distanță "
4033 "pentru a stivui baza dvs. de date sub propriile baze de date existente, "
4034 "astfel încât să extragă valorile implicite din aceasta. Debconf oferă două "
4035 "variabile de mediu, DEBCONF_DB_FALLBACK și DEBCONF_DB_OVERRIDE, pentru a "
4036 "facilita acest lucru din mers. Iată un exemplu de utilizare:"
4037
4038 #. type: Plain text
4039 #: debconf.7:226
4040 #, no-wrap
4041 msgid ""
4042 " cat /var/cache/debconf/config.dat | \\e\n"
4043 " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n"
4044 " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n"
4045 msgstr ""
4046 " cat /var/cache/debconf/config.dat | \\e\n"
4047 " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n"
4048 " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n"
4049
4050 #. type: Plain text
4051 #: debconf.7:232
4052 msgid ""
4053 "This makes the debconf on the remote host read in the data that is piped "
4054 "across the ssh connection and interpret it as a plain text format debconf "
4055 "database. It then uses that database as a fallback database -- a read-only "
4056 "database that is queried for answers to questions if the system's main "
4057 "debconf database lacks answers."
4058 msgstr ""
4059 "Acest lucru face ca debconf de pe gazda de la distanță să citească datele "
4060 "care sunt transmise prin conexiunea ssh și să le interpreteze ca o bază de "
4061 "date debconf în format text simplu. Apoi utilizează această bază de date ca "
4062 "bază de date de rezervă - o bază de date numai pentru citire care este "
4063 "interogată pentru răspunsuri la întrebări în cazul în care baza de date "
4064 "debconf principală a sistemului nu are răspunsuri."
4065
4066 #. type: Plain text
4067 #: debconf.7:234
4068 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:"
4069 msgstr ""
4070 "Iată o altă modalitate de a utiliza variabila de mediu DEBCONF_DB_FALLBACK:"
4071
4072 #. type: Plain text
4073 #: debconf.7:237
4074 #, no-wrap
4075 msgid ""
4076 " ssh -R 389:ldap:389 root@target \\e\n"
4077 " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n"
4078 msgstr ""
4079 " ssh -R 389:ldap:389 root@target \\e\n"
4080 " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n"
4081
4082 #. type: Plain text
4083 #: debconf.7:242
4084 msgid ""
4085 "Here ssh is used to set up a tunneled LDAP connection and run debconf. "
4086 "Debconf is told to use the LDAP server as the fallback database. Note the "
4087 "use of \"{host:localhost}\" to configure how debconf accesses the LDAP "
4088 "database by providing the \"host\" field with a value of \"localhost\"."
4089 msgstr ""
4090 "Aici ssh este utilizat pentru a configura o conexiune LDAP tunelată și "
4091 "pentru a rula debconf. Debconf este instruit să utilizeze serverul LDAP ca "
4092 "bază de date de rezervă. Observați utilizarea lui „{host:localhost}” pentru "
4093 "a configura modul în care debconf accesează baza de date LDAP prin "
4094 "furnizarea câmpului „host” cu valoarea „localhost”."
4095
4096 #. type: Plain text
4097 #: debconf.7:244
4098 msgid "Here's another method:"
4099 msgstr "Iată o altă metodă:"
4100
4101 #. type: Plain text
4102 #: debconf.7:247
4103 #, no-wrap
4104 msgid ""
4105 " scp config.dat root@target:\n"
4106 " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n"
4107 msgstr ""
4108 " scp config.dat root@target:\n"
4109 " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n"
4110
4111 #. type: Plain text
4112 #: debconf.7:252
4113 msgid ""
4114 "Here you copy the database over with scp, and then ssh over and make debconf "
4115 "use the file you copied over. This illustrates a shorthand you can use in "
4116 "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it "
4117 "defaults to \"filename\"."
4118 msgstr ""
4119 "Aici copiați baza de date cu scp, apoi ssh și faceți debconf să utilizeze "
4120 "fișierul pe care l-ați copiat. Acest lucru ilustrează o prescurtare pe care "
4121 "o puteți utiliza în parametrii DEBCONF_DB_FALLBACK - dacă un nume de câmp "
4122 "este omis, acesta devine implicit „nume fișier”."
4123
4124 #. type: Plain text
4125 #: debconf.7:261
4126 msgid ""
4127 "There is only one problem with these uses of the DEBCONF_DB_FALLBACK "
4128 "parameter: While the fallback database can provide answers to questions the "
4129 "other debconf databases have never seen, it is only queried as a fallback; "
4130 "after the other databases. If you need to instead temporarily override an "
4131 "existing value on the remote host, you should instead use the "
4132 "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a "
4133 "temporary database, but this database is consulted before any others, and "
4134 "can be used to override existing values."
4135 msgstr ""
4136 "Există o singură problemă cu aceste utilizări ale parametrului "
4137 "DEBCONF_DB_FALLBACK: În timp ce baza de date de rezervă poate oferi "
4138 "răspunsuri la întrebări pe care celelalte baze de date debconf nu le-au "
4139 "văzut niciodată, aceasta este interogată doar ca o soluție de rezervă; după "
4140 "celelalte baze de date. Dacă trebuie să înlocuiți temporar o valoare "
4141 "existentă pe gazda de la distanță, trebuie să utilizați în schimb variabila "
4142 "DEBCONF_DB_OVERRIDE. Ca și DEBCONF_DB_FALLBACK, aceasta stabilește o bază de "
4143 "date temporară, dar această bază de date este consultată înaintea celorlalte "
4144 "și poate fi utilizată pentru a înlocui valorile existente."
4145
4146 #. type: SH
4147 #: debconf.7:261
4148 #, no-wrap
4149 msgid "Developing for Debconf"
4150 msgstr "Dezvoltarea pentru Debconf"
4151
4152 #. type: Plain text
4153 #: debconf.7:266
4154 msgid ""
4155 "Package developers and others who want to develop packages that use debconf "
4156 "should read B<debconf-devel>(7) ."
4157 msgstr ""
4158 "Dezvoltatorii de pachete și alte persoane care doresc să dezvolte pachete "
4159 "care utilizează debconf ar trebui să citească B<debconf-devel>(7) ."
4160
4161 #. type: Plain text
4162 #: debconf.7:274
4163 msgid ""
4164 "Briefly, debconf communicates with maintainer scripts or other programs via "
4165 "standard input and output, using a simple line-oriented command language "
4166 "similar to that used by common internet protocols such as SMTP. Programs use "
4167 "this protocol to ask debconf to display questions to the user, and retrieve "
4168 "the user's answers. The questions themselves are defined in a separate file, "
4169 "called the \"templates file\", which has a format not unlike a debian "
4170 "control file."
4171 msgstr ""
4172 "Pe scurt, debconf comunică cu scripturile de întreținere sau cu alte "
4173 "programe prin intermediul intrării și ieșirii standard, utilizând un limbaj "
4174 "de comandă simplu, orientat pe linii, similar cu cel utilizat de "
4175 "protocoalele comune de internet, cum ar fi SMTP. Programele utilizează acest "
4176 "protocol pentru a solicita debconf să afișeze întrebări utilizatorului și să "
4177 "recupereze răspunsurile utilizatorului. Întrebările în sine sunt definite "
4178 "într-un fișier separat, denumit fișier de șabloane „templates file”, care "
4179 "are un format asemănător unui fișier de control debian."
4180
4181 #. type: Plain text
4182 #: debconf.7:278
4183 msgid ""
4184 "Debian packages which use debconf typically provide both a templates file "
4185 "and a \"config\" script (run to preconfigure the package) in the control "
4186 "metadata section of the package."
4187 msgstr ""
4188 "Pachetele Debian care utilizează debconf furnizează de obicei atât un fișier "
4189 "de șabloane „templates”, cât și un script „config” (rulat pentru a "
4190 "preconfigura pachetul) în secțiunea de metadate de control a pachetului."
4191
4192 #. type: SH
4193 #: debconf.7:278
4194 #, no-wrap
4195 msgid "ENVIRONMENT"
4196 msgstr "VARIABILE DE MEDIU"
4197
4198 #. type: TP
4199 #: debconf.7:279
4200 #, no-wrap
4201 msgid "B<DEBIAN_FRONTEND>"
4202 msgstr "B<DEBIAN_FRONTEND>"
4203
4204 #. type: Plain text
4205 #: debconf.7:282
4206 msgid "Used to temporarily change the frontend debconf uses. See above."
4207 msgstr ""
4208 "Utilizată pentru a schimba temporar interfața utilizată de debconf. A se "
4209 "vedea mai sus."
4210
4211 #. type: TP
4212 #: debconf.7:282
4213 #, no-wrap
4214 msgid "B<DEBIAN_PRIORITY>"
4215 msgstr "B<DEBIAN_PRIORITY>"
4216
4217 #. type: Plain text
4218 #: debconf.7:286
4219 msgid ""
4220 "Used to temporarily change the minimum priority of question debconf will "
4221 "display. See above."
4222 msgstr ""
4223 "Utilizată pentru a modifica temporar prioritatea minimă a întrebării pe care "
4224 "debconf o va afișa. A se vedea mai sus."
4225
4226 #. type: TP
4227 #: debconf.7:286 debconf-devel.7:576
4228 #, no-wrap
4229 msgid "B<DEBCONF_DEBUG>"
4230 msgstr "B<DEBCONF_DEBUG>"
4231
4232 #. type: Plain text
4233 #: debconf.7:292
4234 msgid ""
4235 "Turns on debugging output on standard error. May be set to a facility name "
4236 "or a regular expression which matches a facility name (such as '.*' to "
4237 "output all debug info). The facility names include:"
4238 msgstr ""
4239 "Activează ieșirea de depanare la ieșirea de eroare standard. Poate fi "
4240 "definită ca un nume de facilitate sau o expresie regulată care corespunde "
4241 "unui nume de facilitate (cum ar fi '.*' pentru a afișa toate informațiile de "
4242 "depanare). Numele facilităților includ:"
4243
4244 #. type: TP
4245 #: debconf.7:292
4246 #, no-wrap
4247 msgid "B<user>"
4248 msgstr "B<user>"
4249
4250 #. type: Plain text
4251 #: debconf.7:295
4252 msgid "Debugging info of interest to a debconf user."
4253 msgstr "Informații de depanare de interes pentru un utilizator debconf."
4254
4255 #. type: TP
4256 #: debconf.7:295
4257 #, no-wrap
4258 msgid "B<developer>"
4259 msgstr "B<developer>"
4260
4261 #. type: Plain text
4262 #: debconf.7:298
4263 msgid "Debugging info of interest to a package developer."
4264 msgstr "Informații de depanare de interes pentru un dezvoltator de pachete."
4265
4266 #. type: TP
4267 #: debconf.7:298
4268 #, no-wrap
4269 msgid "B<db>"
4270 msgstr "B<db>"
4271
4272 #. type: Plain text
4273 #: debconf.7:301
4274 msgid "Debugging info about the backend database."
4275 msgstr "Informații de depanare despre baza de date principală."
4276
4277 #. type: TP
4278 #: debconf.7:302
4279 #, no-wrap
4280 msgid "B<DEBCONF_NOWARNINGS>"
4281 msgstr "B<DEBCONF_NOWARNINGS>"
4282
4283 #. type: Plain text
4284 #: debconf.7:306
4285 msgid ""
4286 "Set to \"yes\" to disable some warnings that debconf may display. Does not "
4287 "suppress display of fatal errors."
4288 msgstr ""
4289 "Definiți la „yes” pentru a dezactiva unele avertismente pe care debconf le "
4290 "poate afișa. Nu suprimă afișarea erorilor fatale."
4291
4292 #. type: TP
4293 #: debconf.7:306
4294 #, no-wrap
4295 msgid "B<DEBCONF_TERSE>"
4296 msgstr "B<DEBCONF_TERSE>"
4297
4298 #. type: Plain text
4299 #: debconf.7:310
4300 msgid ""
4301 "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on "
4302 "the verbiage as much as possible."
4303 msgstr ""
4304 "Definiți la „yes” pentru a activa modul laconic, în care interfețele debconf "
4305 "reduc cantitatea de detalii cât mai mult posibil."
4306
4307 #. type: TP
4308 #: debconf.7:310
4309 #, no-wrap
4310 msgid "B<DEBCONF_DB_FALLBACK>"
4311 msgstr "B<DEBCONF_DB_FALLBACK>"
4312
4313 #. type: Plain text
4314 #: debconf.7:320
4315 msgid ""
4316 "Stack a database after the normally used databases, so that it is used as a "
4317 "fallback to get configuration information from. See \"Unattended Package "
4318 "Installation\" above. If the value of the variable is the name of an "
4319 "existing database in debconf.conf, then that database will be used. "
4320 "Otherwise, the environment variable can be used to configure a database on "
4321 "the fly, by telling the type of database, and optionally passing field:value "
4322 "settings, inside curly braces after the type. Spaces are used to separate "
4323 "fields, so you cannot specify a field value containing whitespace."
4324 msgstr ""
4325 "Stivuiește o bază de date după bazele de date utilizate în mod normal, "
4326 "astfel încât aceasta să fie utilizată ca soluție de rezervă pentru obținerea "
4327 "informațiilor de configurare. Consultați „Instalarea nesupravegheată a "
4328 "pachetelor” de mai sus. Dacă valoarea variabilei este numele unei baze de "
4329 "date existente în debconf.conf, atunci acea bază de date va fi utilizată. În "
4330 "caz contrar, variabila de mediu poate fi utilizată pentru a configura o bază "
4331 "de date din mers, prin indicarea tipului de bază de date și, opțional, prin "
4332 "transmiterea parametrilor câmp:valoare, în interiorul unor acolade după tip. "
4333 "Spațiile sunt utilizate pentru a separa câmpurile, astfel încât nu puteți "
4334 "specifica o valoare de câmp care conține spații albe."
4335
4336 #. type: Plain text
4337 #: debconf.7:323
4338 #, no-wrap
4339 msgid ""
4340 "Thus, this uses the fallbackdb in debconf.conf:\n"
4341 " DEBCONF_DB_FALLBACK=fallbackdb\n"
4342 msgstr ""
4343 "Astfel, aceasta utilizează fallbackdb în debconf.conf:\n"
4344 " DEBCONF_DB_FALLBACK=fallbackdb\n"
4345
4346 #. type: Plain text
4347 #: debconf.7:327
4348 #, no-wrap
4349 msgid ""
4350 "While this sets up a new database of type File, and tells it a filename to\n"
4351 "use and turns off backups:\n"
4352 " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n"
4353 msgstr ""
4354 "În timp ce acest lucru creează o nouă bază de date de tip File, îi indică un nume de fișier de utilizat și dezactivează efectuarea copiilor de rezervă:\n"
4355 " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n"
4356
4357 #. type: Plain text
4358 #: debconf.7:330
4359 #, no-wrap
4360 msgid ""
4361 "And as a shorthand, this sets up a database of type File with a filename:\n"
4362 " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n"
4363 msgstr ""
4364 "Și ca o prescurtare, aceasta creează o bază de date de tip File cu un nume de fișier:\n"
4365 " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n"
4366
4367 #. type: Plain text
4368 #: debconf.7:333
4369 msgid ""
4370 "Note that if a fallback database is set up on the fly, it will be read-only "
4371 "by default."
4372 msgstr ""
4373 "Rețineți că, dacă o bază de date de rezervă este configurată din mers, "
4374 "aceasta va fi implicit numai pentru citire."
4375
4376 #. type: TP
4377 #: debconf.7:333
4378 #, no-wrap
4379 msgid "B<DEBCONF_DB_OVERRIDE>"
4380 msgstr "B<DEBCONF_DB_OVERRIDE>"
4381
4382 #. type: Plain text
4383 #: debconf.7:338
4384 msgid ""
4385 "Stack a database before the normally used databases, so that it can override "
4386 "values from them. The value of the variable works the same as does the value "
4387 "of DEBCONF_DB_FALLBACK."
4388 msgstr ""
4389 "Stivuiește o bază de date înaintea bazelor de date utilizate în mod normal, "
4390 "astfel încât să poată trece peste valorile din acestea. Valoarea variabilei "
4391 "funcționează la fel ca valoarea lui DEBCONF_DB_FALLBACK."
4392
4393 #. type: TP
4394 #: debconf.7:338
4395 #, no-wrap
4396 msgid "B<DEBCONF_DB_REPLACE>"
4397 msgstr "B<DEBCONF_DB_REPLACE>"
4398
4399 #. type: Plain text
4400 #: debconf.7:343
4401 msgid ""
4402 "Use a given database instead of the normally used databases. This may be "
4403 "useful for testing with a separate database without having to create a "
4404 "separate debconf.conf, or to avoid locking the normal databases."
4405 msgstr ""
4406 "Utilizează o anumită bază de date în locul bazelor de date utilizate în mod "
4407 "normal. Acest lucru poate fi util pentru testarea cu o bază de date "
4408 "separată fără a fi nevoie să creați un debconf.conf separat sau pentru a "
4409 "evita blocarea bazelor de date normale."
4410
4411 #. type: TP
4412 #: debconf.7:343
4413 #, no-wrap
4414 msgid "B<DEBCONF_SYSTEMRC>"
4415 msgstr "B<DEBCONF_SYSTEMRC>"
4416
4417 #. type: Plain text
4418 #: debconf.7:349
4419 msgid ""
4420 "If this environment variable is set, debconf will ignore a user's "
4421 "~/.debconfrc file, and use the system one instead. If it is set to the name "
4422 "of a regular file, debconf will use that file in preference to the system "
4423 "configuration files."
4424 msgstr ""
4425 "Dacă această variabilă de mediu este activată, debconf va ignora fișierul "
4426 "~/.debconfrc al unui utilizator și va utiliza în schimb fișierul de sistem. "
4427 "Dacă este definită la numele unui fișier obișnuit, debconf va utiliza acel "
4428 "fișier cu prioritate față de fișierele de configurare ale sistemului."
4429
4430 #. type: TP
4431 #: debconf.7:349
4432 #, no-wrap
4433 msgid "B<DEBCONF_FORCE_DIALOG>"
4434 msgstr "B<DEBCONF_FORCE_DIALOG>"
4435
4436 #. type: Plain text
4437 #: debconf.7:353
4438 msgid ""
4439 "If this environment variable is set, debconf will use dialog in preference "
4440 "to whiptail for the dialog frontend."
4441 msgstr ""
4442 "Dacă această variabilă de mediu este activată, debconf va utiliza dialog în "
4443 "locul whiptail pentru interfața de dialog."
4444
4445 #. type: TP
4446 #: debconf.7:353
4447 #, no-wrap
4448 msgid "B<DEBCONF_FORCE_XDIALOG>"
4449 msgstr "B<DEBCONF_FORCE_XDIALOG>"
4450
4451 #. type: Plain text
4452 #: debconf.7:357
4453 msgid ""
4454 "If this environment variable is set, debconf will use Xdialog in preference "
4455 "to whiptail for the dialog frontend."
4456 msgstr ""
4457 "Dacă această variabilă de mediu este activată, debconf va utiliza Xdialog în "
4458 "loc de whiptail pentru interfața de dialog."
4459
4460 #. type: TP
4461 #: debconf.7:357
4462 #, no-wrap
4463 msgid "B<DEBCONF_NONINTERACTIVE_SEEN>"
4464 msgstr "B<DEBCONF_NONINTERACTIVE_SEEN>"
4465
4466 #. type: Plain text
4467 #: debconf.7:361
4468 msgid ""
4469 "Set to \"true\" to cause the seen flag to be set for questions asked in the "
4470 "noninteractive frontend."
4471 msgstr ""
4472 "Stabiliți-o la „true” pentru ca fanionul „seen” să fie activat pentru "
4473 "întrebările adresate în interfața neinteractivă."
4474
4475 #. type: SH
4476 #: debconf.7:361
4477 #, no-wrap
4478 msgid "BUGS"
4479 msgstr "ERORI"
4480
4481 #. type: Plain text
4482 #: debconf.7:363
4483 msgid "Probably quite a few, there's a lot of code here."
4484 msgstr "Probabil destul de multe, există o grămadă de cod aici."
4485
4486 #. type: Plain text
4487 #: debconf.7:365
4488 msgid ""
4489 "If you do file a bug report, be sure to include the following information:"
4490 msgstr ""
4491 "Dacă depuneți un raport de eroare, asigurați-vă că includeți următoarele "
4492 "informații:"
4493
4494 #. type: TP
4495 #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469
4496 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484
4497 #: debconf-devel.7:489
4498 #, no-wrap
4499 msgid "B<*>"
4500 msgstr "B<*>"
4501
4502 #. type: Plain text
4503 #: debconf.7:368
4504 msgid "The debconf frontend you were using when the problem occurred"
4505 msgstr "Interfața debconf pe care o foloseați când a apărut problema"
4506
4507 #. type: Plain text
4508 #: debconf.7:371
4509 msgid "What you did to trigger the problem."
4510 msgstr "Ce ați făcut pentru a declanșa problema."
4511
4512 #. type: Plain text
4513 #: debconf.7:376
4514 msgid ""
4515 "The full text of any error messages. If you can reproduce the bug, do so "
4516 "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot."
4517 msgstr ""
4518 "Textul integral al oricărui mesaj de eroare. Dacă puteți reproduce eroarea, "
4519 "faceți acest lucru cu DEBCONF_DEBUG='.*' definită și exportată. Acest lucru "
4520 "accelerează foarte mult depanarea."
4521
4522 #. type: Plain text
4523 #: debconf.7:382
4524 msgid ""
4525 "B<debconf.conf>(5), B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-"
4526 "reconfigure>(8), B<debconf>(1),"
4527 msgstr ""
4528 "B<debconf.conf>(5), B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-"
4529 "reconfigure>(8), B<debconf>(1),"
4530
4531 #. type: TH
4532 #: debconf-devel.7:1
4533 #, no-wrap
4534 msgid "DEBCONF-DEVEL"
4535 msgstr "DEBCONF-DEVEL"
4536
4537 #. type: Plain text
4538 #: debconf-devel.7:4
4539 msgid "debconf - developers guide"
4540 msgstr "debconf - ghidul dezvoltatorilor"
4541
4542 #. type: Plain text
4543 #: debconf-devel.7:6
4544 msgid "This is a guide for developing packages that use debconf."
4545 msgstr ""
4546 "Acesta este un ghid pentru dezvoltarea de pachete care utilizează debconf."
4547
4548 #. type: Plain text
4549 #: debconf-devel.7:9
4550 msgid ""
4551 "This manual assumes that you are familiar with debconf as a user, and are "
4552 "familiar with the basics of debian package construction."
4553 msgstr ""
4554 "Acest manual presupune că sunteți familiarizat cu debconf în calitate de "
4555 "utilizator și că sunteți familiarizat cu elementele de bază ale construcției "
4556 "pachetelor debian."
4557
4558 #. type: Plain text
4559 #: debconf-devel.7:18
4560 msgid ""
4561 "This manual begins by explaining two new files that are added to debian "
4562 "packages that use debconf. Then it explains how the debconf protocol works, "
4563 "and points you at some libraries that will let your programs speak the "
4564 "protocol. It discusses other maintainer scripts that debconf is typically "
4565 "used in: the postinst and postrm scripts. Then moves on to more advanced "
4566 "topics like shared debconf templates, debugging, and some common techniques "
4567 "and pitfalls of programming with debconf. It closes with a discussion of "
4568 "debconf's current shortcomings."
4569 msgstr ""
4570 "Acest manual începe prin a explica două fișiere noi care sunt adăugate la "
4571 "pachetele debian care utilizează debconf. Apoi explică modul în care "
4572 "funcționează protocolul debconf și vă indică câteva biblioteci care vor "
4573 "permite programelor dvs. să utilizeze protocolul. Sunt discutate și alte "
4574 "scripturi de întreținere în care debconf este utilizat în mod obișnuit: "
4575 "scripturile „postinst” și „postrm”. Apoi trece la subiecte mai avansate, cum "
4576 "ar fi șabloanele debconf partajate, depanarea și unele tehnici și capcane "
4577 "comune ale programării cu debconf. Se încheie cu o discuție despre "
4578 "deficiențele actuale ale debconf."
4579
4580 #. type: SH
4581 #: debconf-devel.7:18
4582 #, no-wrap
4583 msgid "THE CONFIG SCRIPT"
4584 msgstr "SCRIPTUL DE CONFIGURARE"
4585
4586 #. type: Plain text
4587 #: debconf-devel.7:23
4588 msgid ""
4589 "Debconf adds an additional maintainer script, the config script, to the set "
4590 "of maintainer scripts that can be in debian packages (the postinst, preinst, "
4591 "postrm, and prerm). The config script is responsible for asking any "
4592 "questions necessary to configure the package."
4593 msgstr ""
4594 "Debconf adaugă un script de întreținere suplimentar, scriptul „config”, la "
4595 "setul de scripturi de întreținere care pot fi în pachetele debian "
4596 "(„postinst”, „preinst”, „postrm” și „prerm”). Scriptul config este "
4597 "responsabil cu adresarea oricăror întrebări necesare pentru configurarea "
4598 "pachetului."
4599
4600 #. type: Plain text
4601 #: debconf-devel.7:28
4602 msgid ""
4603 "Note: It is a little confusing that dpkg refers to running a package's "
4604 "postinst script as \"configuring\" the package, since a package that uses "
4605 "debconf is often fully pre-configured, by its config script, before the "
4606 "postinst ever runs. Oh well."
4607 msgstr ""
4608 "Notă: Este puțin confuz faptul că dpkg se referă la rularea scriptului "
4609 "„postinst” al unui pachet ca la „configurarea” pachetului, deoarece un "
4610 "pachet care utilizează debconf este adesea complet pre-configurat, prin "
4611 "scriptul său de configurare, înainte ca scriptul „postinst” să fie rulat "
4612 "vreodată. În fine!"
4613
4614 #. type: Plain text
4615 #: debconf-devel.7:34
4616 msgid ""
4617 "Like the postinst, the config script is passed two parameters when it is "
4618 "run. The first tells what action is being performed, and the second is the "
4619 "version of the package that is currently installed. So, like in a postinst, "
4620 "you can use dpkg --compare-versions on $2 to make some behavior happen only "
4621 "on upgrade from a particular version of a package, and things like that."
4622 msgstr ""
4623 "La fel ca „postinst”, scriptul „config” primește doi parametri atunci când "
4624 "este rulat. Primul spune ce acțiune este efectuată, iar al doilea este "
4625 "versiunea pachetului care este instalat în prezent. Astfel, la fel ca în "
4626 "„postinst”, puteți utiliza dpkg --compare-versions pe $2 pentru a face ca un "
4627 "anumit comportament să se întâmple numai la actualizarea de la o anumită "
4628 "versiune a unui pachet și alte lucruri de acest gen."
4629
4630 #. type: Plain text
4631 #: debconf-devel.7:36
4632 msgid "The config script can be run in one of three ways:"
4633 msgstr "Scriptul de configurare poate fi rulat în trei moduri:"
4634
4635 #. type: TP
4636 #: debconf-devel.7:36
4637 #, no-wrap
4638 msgid "B<1>"
4639 msgstr "B<1>"
4640
4641 #. type: Plain text
4642 #: debconf-devel.7:40
4643 msgid ""
4644 "If a package is pre-configured, with dpkg-preconfigure, its config script is "
4645 "run, and is passed the parameters \"configure\", and installed-version."
4646 msgstr ""
4647 "Dacă un pachet este preconfigurat, cu dpkg-preconfigure, scriptul său de "
4648 "configurare este rulat și i se transmit parametrii „configure” și installed-"
4649 "version."
4650
4651 #. type: TP
4652 #: debconf-devel.7:40
4653 #, no-wrap
4654 msgid "B<2>"
4655 msgstr "B<2>"
4656
4657 #. type: Plain text
4658 #: debconf-devel.7:47
4659 msgid ""
4660 "When a package's postinst is run, debconf will try to run the config script "
4661 "then too, and it will be passed the same parameters it was passed when it is "
4662 "pre-configured. This is necessary because the package might not have been "
4663 "pre-configured, and the config script still needs to get a chance to run. "
4664 "See HACKS for details."
4665 msgstr ""
4666 "Atunci când scriptul „postinst” al unui pachet este rulat, debconf va "
4667 "încerca să ruleze și scriptul „config”, iar acestuia i se vor pasa aceiași "
4668 "parametri care i-au fost pasați atunci când a fost preconfigurat. Acest "
4669 "lucru este necesar deoarece este posibil ca pachetul să nu fi fost "
4670 "preconfigurat, iar scriptul „config” trebuie să aibă în continuare șansa de "
4671 "a se executa. Consultați secțiunea TRUCURI pentru detalii."
4672
4673 #. type: TP
4674 #: debconf-devel.7:47
4675 #, no-wrap
4676 msgid "B<3>"
4677 msgstr "B<3>"
4678
4679 #. type: Plain text
4680 #: debconf-devel.7:52
4681 msgid ""
4682 "If a package is reconfigured, with dpkg-reconfigure, its config script it "
4683 "run, and is passed the parameters \"reconfigure\" and installed-version."
4684 msgstr ""
4685 "Dacă un pachet este reconfigurat, cu dpkg-reconfigure, scriptul său „config” "
4686 "este rulat și i se transmit parametrii „reconfigure” și installed-version."
4687
4688 #. type: Plain text
4689 #: debconf-devel.7:58
4690 msgid ""
4691 "Note that since a typical package install or upgrade using apt runs steps 1 "
4692 "and 2, the config script will typically be run twice. It should do nothing "
4693 "the second time (to ask questions twice in a row is annoying), and it should "
4694 "definitely be idempotent. Luckily, debconf avoids repeating questions by "
4695 "default, so this is generally easy to accomplish."
4696 msgstr ""
4697 "Rețineți că, deoarece o instalare sau o actualizare tipică a unui pachet "
4698 "utilizând apt execută pașii 1 și 2, scriptul „config” va fi de obicei "
4699 "executat de două ori. Acesta nu ar trebui să facă nimic a doua oară (a pune "
4700 "întrebări de două ori la rând este enervant) și ar trebui cu siguranță să "
4701 "fie idempotent. Din fericire, debconf evită implicit repetarea întrebărilor, "
4702 "astfel încât acest lucru este în general ușor de realizat."
4703
4704 #. type: Plain text
4705 #: debconf-devel.7:64
4706 msgid ""
4707 "Note that the config script is run before the package is unpacked. It should "
4708 "only use commands that are in essential packages. The only dependency of "
4709 "your package that is guaranteed to be met when its config script is run is a "
4710 "dependency (possibly versioned) on debconf itself."
4711 msgstr ""
4712 "Rețineți că scriptul „config” este rulat înainte ca pachetul să fie "
4713 "despachetat. Acesta ar trebui să utilizeze numai comenzile care se află în "
4714 "pachetele esențiale. Singura dependență a pachetului dvs. care este "
4715 "garantată a fi îndeplinită atunci când scriptul config este rulat este o "
4716 "dependență (posibil cu o versiune specificată) de debconf însuși."
4717
4718 #. type: Plain text
4719 #: debconf-devel.7:70
4720 msgid ""
4721 "The config script should not need to modify the filesystem at all. It just "
4722 "examines the state of the system, and asks questions, and debconf stores the "
4723 "answers to be acted on later by the postinst script. Conversely, the "
4724 "postinst script should almost never use debconf to ask questions, but should "
4725 "instead act on the answers to questions asked by the config script."
4726 msgstr ""
4727 "Scriptul „config” nu ar trebui să fie nevoit să modifice deloc sistemul de "
4728 "fișiere. Acesta examinează doar starea sistemului și pune întrebări, iar "
4729 "debconf stochează răspunsurile pentru a fi utilizate ulterior de scriptul "
4730 "„postinst”. În schimb, scriptul „postinst” nu ar trebui să utilizeze aproape "
4731 "niciodată debconf pentru a pune întrebări, ci ar trebui să acționeze pe baza "
4732 "răspunsurilor la întrebările puse de scriptul „config”."
4733
4734 #. type: SH
4735 #: debconf-devel.7:70
4736 #, no-wrap
4737 msgid "THE TEMPLATES FILE"
4738 msgstr "FIȘIERUL DE ȘABLOANE „TEMPLATES”"
4739
4740 #. type: Plain text
4741 #: debconf-devel.7:73
4742 msgid ""
4743 "A package that uses debconf probably wants to ask some questions. These "
4744 "questions are stored, in template form, in the templates file."
4745 msgstr ""
4746 "Un pachet care utilizează debconf dorește probabil să pună câteva întrebări. "
4747 "Aceste întrebări sunt stocate, sub formă de șablon, în fișierul templates."
4748
4749 #. type: Plain text
4750 #: debconf-devel.7:78
4751 msgid ""
4752 "Like the config script, the templates file is put in the control.tar.gz "
4753 "section of a deb. Its format is similar to a debian control file; a set of "
4754 "stanzas separated by blank lines, with each stanza having a RFC822-like form:"
4755 msgstr ""
4756 "La fel ca scriptul config, fișierul templates este pus în secțiunea "
4757 "control.tar.gz a unui deb. Formatul său este similar cu cel al unui fișier "
4758 "de control debian; un set de strofe separate prin linii goale, fiecare "
4759 "strofă având o formă similară formatului RFC822:"
4760
4761 #. type: Plain text
4762 #: debconf-devel.7:94
4763 #, no-wrap
4764 msgid ""
4765 " Template: foo/bar\n"
4766 " Type: string\n"
4767 " Default: foo\n"
4768 " Description: This is a sample string question.\n"
4769 " This is its extended description.\n"
4770 " .\n"
4771 " Notice that:\n"
4772 " - Like in a debian package description, a dot\n"
4773 " on its own line sets off a new paragraph.\n"
4774 " - Most text is word-wrapped, but doubly-indented\n"
4775 " text is left alone, so you can use it for lists\n"
4776 " of items, like this list. Be careful, since\n"
4777 " it is not word-wrapped, if it's too wide\n"
4778 " it will look bad. Using it for short items\n"
4779 " is best (so this is a bad example).\n"
4780 msgstr ""
4781 " Template: foo/bar\n"
4782 " Type: string\n"
4783 " Def\ault: foo\n"
4784 " Description: Aceasta este un exemplu de chestionar.\n"
4785 " Aceasta este descrierea sa extinsă.\n"
4786 " .\n"
4787 " Rețineți că:n\n"
4788 " - Ca în descrierea unui pachet debian, un punct plasat\n"
4789 " singur pe linie marchează începutul unui nou paragraf.\n"
4790 " - Majoritatea textului este încadrat în cuvinte, dar textul\n"
4791 " cu dublă aliniere este lăsat singur, deci îl puteți folosi\n"
4792 " pentru liste de elemente, precum această listă. Fiți atenți,\n"
4793 " deoarece acesta nu este încadrat în cuvinte, dacă este\n"
4794 " prea lat va arăta urât. Utilizarea lui pentru elemente scurte\n"
4795 " este cel mai potrivit (deci acesta este un exemplu prost).\n"
4796
4797 #. type: Plain text
4798 #: debconf-devel.7:99
4799 #, no-wrap
4800 msgid ""
4801 " Template: foo/baz\n"
4802 " Type: boolean\n"
4803 " Description: Clear enough, no?\n"
4804 " This is another question, of boolean type.\n"
4805 msgstr ""
4806 " Template: foo/baz\n"
4807 " Type: boolean\n"
4808 " Description: Destul de clar, nu?\n"
4809 " Aceasta este o altă întrebare, de tip boolean.\n"
4810
4811 #. type: Plain text
4812 #: debconf-devel.7:103
4813 msgid ""
4814 "For some real-life examples of templates files, see /var/lib/dpkg/info/"
4815 "debconf.templates, and other .templates files in that directory."
4816 msgstr ""
4817 "Pentru câteva exemple reale de fișiere șablon, consultați „/var/lib/dpkg/"
4818 "info/debconf.templates” și alte fișiere „.templates” din acel director."
4819
4820 #. type: Plain text
4821 #: debconf-devel.7:105
4822 msgid "Let's look at each of the fields in turn.."
4823 msgstr "Să analizăm pe rând fiecare dintre câmpuri."
4824
4825 #. type: TP
4826 #: debconf-devel.7:105
4827 #, no-wrap
4828 msgid "B<Template>"
4829 msgstr "B<Template>"
4830
4831 #. type: Plain text
4832 #: debconf-devel.7:111
4833 msgid ""
4834 "The name of the template, in the 'Template' field, is generally prefixed "
4835 "with the name of the package. After that the namespace is wide open; you can "
4836 "use a simple flat layout like the one above, or set up \"subdirectories\" "
4837 "containing related questions."
4838 msgstr ""
4839 "Numele șablonului, în câmpul „Template”, este în general precedat de numele "
4840 "pachetului. După aceea, spațiul de nume este foarte liber; puteți utiliza un "
4841 "aspect plat simplu, precum cel de mai sus, sau puteți crea „subdirectoare” "
4842 "care să conțină întrebări conexe."
4843
4844 #. type: TP
4845 #: debconf-devel.7:111
4846 #, no-wrap
4847 msgid "B<Type>"
4848 msgstr "B<Type>"
4849
4850 #. type: Plain text
4851 #: debconf-devel.7:115
4852 msgid ""
4853 "The type of the template determines what kind of widget is displayed to the "
4854 "user. The currently supported types are:"
4855 msgstr ""
4856 "Tipul șablonului determină ce tip de element de meniu este afișat "
4857 "utilizatorului. Tipurile acceptate în prezent sunt:"
4858
4859 #. type: TP
4860 #: debconf-devel.7:116
4861 #, no-wrap
4862 msgid "B<string>"
4863 msgstr "B<string>"
4864
4865 #. type: Plain text
4866 #: debconf-devel.7:119
4867 msgid ""
4868 "Results in a free-form input field that the user can type any string into."
4869 msgstr ""
4870 "Rezultă un câmp de intrare cu formă liberă în care utilizatorul poate "
4871 "introduce orice șir de caractere."
4872
4873 #. type: TP
4874 #: debconf-devel.7:119
4875 #, no-wrap
4876 msgid "B<password>"
4877 msgstr "B<password>"
4878
4879 #. type: Plain text
4880 #: debconf-devel.7:124
4881 msgid ""
4882 "Prompts the user for a password. Use this with caution; be aware that the "
4883 "password the user enters will be written to debconf's database. You should "
4884 "probably clean that value out of the database as soon as is possible."
4885 msgstr ""
4886 "Solicită utilizatorului o parolă. Utilizați această opțiune cu precauție; "
4887 "fiți conștienți de faptul că parola introdusă de utilizator va fi scrisă în "
4888 "baza de date a debconf. Probabil ar trebui să eliminați această valoare din "
4889 "baza de date cât mai curând posibil."
4890
4891 #. type: TP
4892 #: debconf-devel.7:124
4893 #, no-wrap
4894 msgid "B<boolean>"
4895 msgstr "B<boolean>"
4896
4897 #. type: Plain text
4898 #: debconf-devel.7:127
4899 msgid "A true/false choice."
4900 msgstr "O alegere adevărat/fals (true/false)."
4901
4902 #. type: TP
4903 #: debconf-devel.7:127
4904 #, no-wrap
4905 msgid "B<select>"
4906 msgstr "B<select>"
4907
4908 #. type: Plain text
4909 #: debconf-devel.7:132
4910 msgid ""
4911 "A choice between one of a number of values. The choices must be specified in "
4912 "a field named 'Choices'. Separate the possible values with commas and "
4913 "spaces, like this:"
4914 msgstr ""
4915 "O alegere între una dintre mai multe valori. Opțiunile trebuie specificate "
4916 "într-un câmp numit „Choices”. Separați valorile posibile cu virgule și "
4917 "spații, astfel:"
4918
4919 #. type: Plain text
4920 #: debconf-devel.7:134
4921 #, no-wrap
4922 msgid " Choices: yes, no, maybe\n"
4923 msgstr " Choices: da, nu, poate\n"
4924
4925 #. type: TP
4926 #: debconf-devel.7:135
4927 #, no-wrap
4928 msgid "B<multiselect>"
4929 msgstr "B<multiselect>"
4930
4931 #. type: Plain text
4932 #: debconf-devel.7:139
4933 msgid ""
4934 "Like the select data type, except the user can choose any number of items "
4935 "from the choices list (or choose none of them)."
4936 msgstr ""
4937 "La fel ca tipul de date de selectare, cu excepția faptului că utilizatorul "
4938 "poate alege orice număr de elemente din lista de opțiuni (sau poate să nu "
4939 "aleagă niciuna dintre ele)."
4940
4941 #. type: TP
4942 #: debconf-devel.7:139
4943 #, no-wrap
4944 msgid "B<note>"
4945 msgstr "B<note>"
4946
4947 #. type: Plain text
4948 #: debconf-devel.7:147
4949 msgid ""
4950 "Rather than being a question per se, this datatype indicates a note that can "
4951 "be displayed to the user. It should be used only for important notes that "
4952 "the user really should see, since debconf will go to great pains to make "
4953 "sure the user sees it; halting the install for them to press a key. It's "
4954 "best to use these only for warning about very serious problems, and the "
4955 "error datatype is often more suitable."
4956 msgstr ""
4957 "Mai degrabă decât o întrebare în sine, acest tip de date indică o notă care "
4958 "poate fi afișată utilizatorului. Ar trebui utilizat numai pentru note "
4959 "importante pe care utilizatorul ar trebui să le vadă, deoarece debconf se va "
4960 "strădui foarte mult să se asigure că utilizatorul le vede, oprind instalarea "
4961 "pentru ca acesta să apese o tastă. Cel mai bine este să le folosiți doar "
4962 "pentru avertizări cu privire la probleme foarte grave, iar tipul de date "
4963 "B<error> este adesea mai potrivit."
4964
4965 #. type: TP
4966 #: debconf-devel.7:147
4967 #, no-wrap
4968 msgid "B<error>"
4969 msgstr "B<error>"
4970
4971 #. type: Plain text
4972 #: debconf-devel.7:152
4973 msgid ""
4974 "This datatype is used for error messages, such as input validation errors. "
4975 "Debconf will show a question of this type even if the priority is too high "
4976 "or the user has already seen it."
4977 msgstr ""
4978 "Acest tip de date este utilizat pentru mesajele de eroare, cum ar fi erorile "
4979 "de validare a intrărilor. Debconf va afișa o întrebare de acest tip chiar "
4980 "dacă prioritatea este prea mare sau dacă utilizatorul a văzut-o deja."
4981
4982 #. type: TP
4983 #: debconf-devel.7:152
4984 #, no-wrap
4985 msgid "B<title>"
4986 msgstr "B<title>"
4987
4988 #. type: Plain text
4989 #: debconf-devel.7:155
4990 msgid "This datatype is used for titles, to be set with the SETTITLE command."
4991 msgstr ""
4992 "Acest tip de date este utilizat pentru titluri, pentru a fi definite cu "
4993 "comanda SETTITLE."
4994
4995 #. type: TP
4996 #: debconf-devel.7:155
4997 #, no-wrap
4998 msgid "B<text>"
4999 msgstr "B<text>"
5000
5001 #. type: Plain text
5002 #: debconf-devel.7:162
5003 msgid ""
5004 "This datatype can be used for fragments of text, such as labels, that can be "
5005 "used for cosmetic reasons in the displays of some frontends. Other frontends "
5006 "will not use it at all. There is no point in using this datatype yet, since "
5007 "no frontends support it well. It may even be removed in the future."
5008 msgstr ""
5009 "Acest tip de date poate fi utilizat pentru fragmente de text, cum ar fi "
5010 "etichetele, care pot fi utilizate din motive cosmetice în afișajele unor "
5011 "interfețe. Alte interfețe nu îl vor utiliza deloc. Deocamdată nu are rost să "
5012 "utilizați acest tip de date, deoarece nicio interfață nu îl acceptă bine. "
5013 "Acesta ar putea fi chiar eliminat în viitor."
5014
5015 #. type: TP
5016 #: debconf-devel.7:163
5017 #, no-wrap
5018 msgid "B<Default>"
5019 msgstr "B<Default>"
5020
5021 #. type: Plain text
5022 #: debconf-devel.7:171
5023 msgid ""
5024 "The 'Default' field tells debconf what the default value should be. For "
5025 "multiselect, it can be a list of choices, separated by commas and spaces, "
5026 "similar to the 'Choices' field. For select, it should be one of the choices. "
5027 "For boolean, it is \"true\" or \"false\", while it can be anything for a "
5028 "string, and it is ignored for passwords."
5029 msgstr ""
5030 "Câmpul „Default” indică debconf care ar trebui să fie valoarea implicită. "
5031 "Pentru B<multiselect>, aceasta poate fi o listă de opțiuni, separate prin "
5032 "virgule și spații, similar câmpului „Choices”. Pentru B<select>, ar trebui "
5033 "să fie una dintre opțiuni. Pentru B<boolean>, este „true” sau „false”, în "
5034 "timp ce poate fi orice pentru un B<string> și este ignorat pentru "
5035 "B<password>."
5036
5037 #. type: Plain text
5038 #: debconf-devel.7:178
5039 msgid ""
5040 "Don't make the mistake of thinking that the default field contains the "
5041 "\"value\" of the question, or that it can be used to change the value of the "
5042 "question. It does not, and cannot, it just provides a default value for the "
5043 "first time the question is displayed. To provide a default that changes on "
5044 "the fly, you'd have to use the SET command to change the value of a question."
5045 msgstr ""
5046 "Nu faceți greșeala de a crede că câmpul B<Default> conține „valoarea” "
5047 "întrebării sau că poate fi utilizat pentru a modifica valoarea întrebării. "
5048 "Nu este așa și nici nu poate fi, ci doar oferă o valoare implicită pentru "
5049 "prima dată când este afișată întrebarea. Pentru a furniza o valoare "
5050 "implicită care se modifică din mers, ar trebui să utilizați comanda SET "
5051 "pentru a modifica valoarea unei întrebări."
5052
5053 #. type: TP
5054 #: debconf-devel.7:179
5055 #, no-wrap
5056 msgid "B<Description>"
5057 msgstr "B<Description>"
5058
5059 #. type: Plain text
5060 #: debconf-devel.7:187
5061 msgid ""
5062 "The 'Description' field, like the description of a Debian package, has two "
5063 "parts: A short description and an extended description. Note that some "
5064 "debconf frontends don't display the long description, or might only display "
5065 "it if the user asks for help. So the short description should be able to "
5066 "stand on its own."
5067 msgstr ""
5068 "Câmpul „ Description ”, ca și descrierea unui pachet Debian, are două părți: "
5069 "O descriere scurtă și o descriere extinsă. Rețineți că unele interfețe "
5070 "debconf nu afișează descrierea lungă sau o pot afișa doar dacă utilizatorul "
5071 "cere ajutor. Așadar, descrierea scurtă ar trebui să fie capabilă „să se "
5072 "descurce” singură."
5073
5074 #. type: Plain text
5075 #: debconf-devel.7:193
5076 msgid ""
5077 "If you can't think up a long description, then first, think some more. Post "
5078 "to debian-devel. Ask for help. Take a writing class! That extended "
5079 "description is important. If after all that you still can't come up with "
5080 "anything, leave it blank. There is no point in duplicating the short "
5081 "description."
5082 msgstr ""
5083 "Dacă nu vă puteți gândi la o descriere lungă, atunci mai întâi, gândiți-vă "
5084 "mai mult. Adresați-vă la debian-devel. Cereți ajutor. Luați un curs de "
5085 "scriere! Acea descriere extinsă este importantă. Dacă după toate astea tot "
5086 "nu vă vine nimic în minte, lăsați-o goală. Nu are rost să duplicați "
5087 "descrierea scurtă."
5088
5089 #. type: Plain text
5090 #: debconf-devel.7:198
5091 msgid ""
5092 "Text in the extended description will be word-wrapped, unless it is prefixed "
5093 "by additional whitespace (beyond the one required space). You can break it "
5094 "up into separate paragraphs by putting \" .\" on a line by itself between "
5095 "them."
5096 msgstr ""
5097 "Textul din descrierea extinsă va fi încadrat în cuvinte, cu excepția cazului "
5098 "în care este prefixat de un spațiu alb suplimentar (în afară de spațiul "
5099 "necesar). Îl puteți împărți în paragrafe separate punând „ .” pe o linie de "
5100 "sine stătătoare între ele."
5101
5102 #. type: SH
5103 #: debconf-devel.7:199
5104 #, no-wrap
5105 msgid "QUESTIONS"
5106 msgstr "ÎNTREBĂRI"
5107
5108 #. type: Plain text
5109 #: debconf-devel.7:211
5110 msgid ""
5111 "A question is an instantiated template. By asking debconf to display a "
5112 "question, your config script can interact with the user. When debconf loads "
5113 "a templates file (this happens whenever a config or postinst script is run), "
5114 "it automatically instantiates a question from each template. It is actually "
5115 "possible to instantiate several independent questions from the same template "
5116 "(using the REGISTER command), but that is rarely necessary. Templates are "
5117 "static data that comes from the templates file, while questions are used to "
5118 "store dynamic data, like the current value of the question, whether a user "
5119 "has seen a question, and so on. Keep the distinction between a template and "
5120 "a question in mind, but don't worry too much about it."
5121 msgstr ""
5122 "O întrebare este o instanță a unui șablon. Solicitând debconf să afișeze o "
5123 "întrebare, scriptul dvs. „config” poate interacționa cu utilizatorul. Atunci "
5124 "când debconf încarcă un fișier de șabloane (acest lucru se întâmplă ori de "
5125 "câte ori se execută un script „config” sau „postinst”), acesta creează "
5126 "automat o instanță de întrebare din fiecare șablon. De fapt, este posibilă "
5127 "crearea de instanțe de mai multe întrebări independente din același șablon "
5128 "(utilizând comanda REGISTER), dar acest lucru este rareori necesar. "
5129 "Șabloanele sunt date statice care provin din fișierul de șabloane, în timp "
5130 "ce întrebările sunt utilizate pentru a stoca date dinamice, cum ar fi "
5131 "valoarea curentă a întrebării, dacă un utilizator a văzut o întrebare și așa "
5132 "mai departe. Țineți cont de distincția dintre un șablon și o întrebare, dar "
5133 "nu vă faceți prea multe griji cu privire la aceasta."
5134
5135 #. type: SH
5136 #: debconf-devel.7:211
5137 #, no-wrap
5138 msgid "SHARED TEMPLATES"
5139 msgstr "ȘABLOANE PARTAJATE"
5140
5141 #. type: Plain text
5142 #: debconf-devel.7:218
5143 msgid ""
5144 "It's actually possible to have a template and a question that are shared "
5145 "among a set of packages. All the packages have to provide an identical copy "
5146 "of the template in their templates files. This can be useful if a bunch of "
5147 "packages need to ask the same question, and you only want to bother the user "
5148 "with it once. Shared templates are generally put in the shared/ pseudo-"
5149 "directory in the debconf template namespace."
5150 msgstr ""
5151 "De fapt, este posibil să existe un șablon și o întrebare care sunt partajate "
5152 "între un set de pachete. Toate pachetele trebuie să furnizeze o copie "
5153 "identică a șablonului în fișierele lor de șabloane. Acest lucru poate fi "
5154 "util dacă o serie de pachete trebuie să pună aceeași întrebare și doriți să "
5155 "deranjați utilizatorul o singură dată cu aceasta. Șabloanele partajate sunt "
5156 "în general plasate în pseudo-directorul shared/ din spațiul de nume al "
5157 "șabloanelor debconf."
5158
5159 #. type: SH
5160 #: debconf-devel.7:218
5161 #, no-wrap
5162 msgid "THE DEBCONF PROTOCOL"
5163 msgstr "PROTOCOLUL DEBCONF"
5164
5165 #. type: Plain text
5166 #: debconf-devel.7:224
5167 msgid ""
5168 "Config scripts communicate with debconf using the debconf protocol. This is "
5169 "a simple line-oriented protocol, similar to common internet protocols such "
5170 "as SMTP. The config script sends debconf a command by writing the command to "
5171 "standard output. Then it can read debconf's reply from standard input."
5172 msgstr ""
5173 "Scripturile „config” comunică cu debconf utilizând protocolul debconf. "
5174 "Acesta este un protocol simplu orientat pe linii, similar protocoalelor "
5175 "comune de Internet, cum ar fi SMTP. Scriptul „config” trimite o comandă "
5176 "către debconf prin scrierea comenzii la ieșirea standard. Apoi poate citi "
5177 "răspunsul debconf de la intrarea standard."
5178
5179 #. type: Plain text
5180 #: debconf-devel.7:230
5181 msgid ""
5182 "Debconf's reply can be broken down into two parts: A numeric result code "
5183 "(the first word of the reply), and an optional extended result code (the "
5184 "remainder of the reply). The numeric code uses 0 to indicate success, and "
5185 "other numbers to indicate various kinds of failure. For full details, see "
5186 "the table in Debian policy's debconf specification document."
5187 msgstr ""
5188 "Răspunsul Debconf poate fi împărțit în două părți: Un cod de rezultat "
5189 "numeric (primul cuvânt al răspunsului) și un cod de rezultat extins opțional "
5190 "(restul răspunsului). Codul numeric utilizează 0 pentru a indica succesul, "
5191 "iar alte numere pentru a indica diferite tipuri de eșecuri. Pentru detalii "
5192 "complete, consultați tabelul din documentul de specificații debconf al "
5193 "politicii Debian."
5194
5195 #. type: Plain text
5196 #: debconf-devel.7:235
5197 msgid ""
5198 "The extended return code is generally free form and unspecified, so you "
5199 "should generally ignore it, and should certainly not try to parse it in a "
5200 "program to work out what debconf is doing. The exception is commands like "
5201 "GET, that cause a value to be returned in the extended return code."
5202 msgstr ""
5203 "Codul de returnare extins este, în general, liber și nespecificat, astfel "
5204 "încât, în general, ar trebui să îl ignorați și cu siguranță nu ar trebui să "
5205 "încercați să îl analizați într-un program pentru a afla ce face debconf. "
5206 "Excepție fac comenzile precum GET, care fac ca o valoare să fie returnată în "
5207 "codul de răspuns extins."
5208
5209 #. type: Plain text
5210 #: debconf-devel.7:239
5211 msgid ""
5212 "Generally you'll want to use a language-specific library that handles the "
5213 "nuts and bolts of setting up these connections to debconf and communicating "
5214 "with it."
5215 msgstr ""
5216 "În general, veți dori să utilizați o bibliotecă specifică limbajului care să "
5217 "se ocupe de configurarea acestor conexiuni la debconf și de comunicarea cu "
5218 "acesta."
5219
5220 #. type: Plain text
5221 #: debconf-devel.7:242
5222 msgid ""
5223 "For now, here are the commands in the protocol. This is not the definitive "
5224 "definition, see Debian policy's debconf specification document for that."
5225 msgstr ""
5226 "Pentru moment, aici sunt comenzile din protocol. Aceasta nu este definiția "
5227 "definitivă, consultați documentul de specificații debconf al politicii "
5228 "Debian pentru aceasta."
5229
5230 #. type: TP
5231 #: debconf-devel.7:242
5232 #, no-wrap
5233 msgid "B<VERSION number>"
5234 msgstr "B<VERSION număr>"
5235
5236 #. type: Plain text
5237 #: debconf-devel.7:250
5238 msgid ""
5239 "You generally don't need to use this command. It exchanges with debconf the "
5240 "protocol version number that is being used. The current protocol version is "
5241 "2.0, and versions in the 2.x series will be backwards-compatible. You may "
5242 "specify the protocol version number you are speaking and debconf will return "
5243 "the version of the protocol it speaks in the extended result code. If the "
5244 "version you specify is too low, debconf will reply with numeric code 30."
5245 msgstr ""
5246 "În general, nu este necesar să utilizați această comandă. Aceasta schimbă cu "
5247 "debconf numărul versiunii protocolului care este utilizat. Versiunea actuală "
5248 "a protocolului este 2.0, iar versiunile din seria 2.x vor fi "
5249 "retrocompatibile. Puteți specifica numărul versiunii protocolului pe care îl "
5250 "vorbiți, iar debconf va returna versiunea protocolului pe care îl vorbește "
5251 "în codul de rezultat extins. Dacă versiunea pe care o specificați este prea "
5252 "mică, debconf va răspunde cu codul numeric 30."
5253
5254 #. type: TP
5255 #: debconf-devel.7:250
5256 #, no-wrap
5257 msgid "B<CAPB capabilities>"
5258 msgstr "B<CAPB capacități>"
5259
5260 #. type: Plain text
5261 #: debconf-devel.7:257
5262 msgid ""
5263 "You generally don't need to use this command. It exchanges with debconf a "
5264 "list of supported capabilities (separated by spaces). Capabilities that both "
5265 "you and debconf support will be used, and debconf will reply with all the "
5266 "capabilities it supports."
5267 msgstr ""
5268 "În general, nu este necesar să utilizați această comandă. Aceasta schimbă cu "
5269 "debconf o listă de capacități acceptate (separate prin spații). Capacitățile "
5270 "pe care atât dumneavoastră, cât și debconf le acceptați vor fi utilizate, "
5271 "iar debconf va răspunde cu toate capacitățile pe care le acceptă."
5272
5273 #. type: Plain text
5274 #: debconf-devel.7:267
5275 msgid ""
5276 "If 'escape' is found among your capabilities, debconf will expect commands "
5277 "you send it to have backslashes and newlines escaped (as \\e\\e and \\en "
5278 "respectively) and will in turn escape backslashes and newlines in its "
5279 "replies. This can be used, for example, to substitute multi-line strings "
5280 "into templates, or to get multi-line extended descriptions reliably using "
5281 "METAGET. In this mode, you must escape input text yourself (you can use "
5282 "B<debconf-escape>(1) to help with this if you want), but the confmodule "
5283 "libraries will unescape replies for you."
5284 msgstr ""
5285 "Dacă „escape” se găsește printre capacitățile dvs., debconf se va aștepta ca "
5286 "comenzile pe care i le trimiteți să aibă bare oblice și linii noi eludate "
5287 "(ca \\e\\e și respectiv \\en) și va eluda la rândul său bare oblice și linii "
5288 "noi în răspunsurile sale. Acest lucru poate fi utilizat, de exemplu, pentru "
5289 "a înlocui șiruri de caractere cu mai multe linii în șabloane sau pentru a "
5290 "obține descrieri extinse cu mai multe linii în mod fiabil utilizând METAGET. "
5291 "În acest mod, trebuie să eludați singuri textul de intrare (dacă doriți, "
5292 "puteți utiliza B<debconf-escape>(1) pentru a vă ajuta în acest sens), iar "
5293 "bibliotecile confmodule vor elimina eludarea din răspunsuri pentru "
5294 "dumneavoastră."
5295
5296 #. type: TP
5297 #: debconf-devel.7:268
5298 #, no-wrap
5299 msgid "B<SETTITLE question>"
5300 msgstr "B<SETTITLE întrebare>"
5301
5302 #. type: Plain text
5303 #: debconf-devel.7:275
5304 msgid ""
5305 "This sets the title debconf displays to the user, using the short "
5306 "description of the template for the specified question. The template should "
5307 "be of type title. You rarely need to use this command since debconf can "
5308 "automatically generate a title based on your package's name."
5309 msgstr ""
5310 "Aceasta definește titlul pe care debconf îl afișează utilizatorului, "
5311 "utilizând descrierea scurtă a șablonului pentru întrebarea specificată. "
5312 "Șablonul trebuie să fie de tip B<title>. Rareori trebuie să utilizați "
5313 "această comandă, deoarece debconf poate genera automat un titlu bazat pe "
5314 "numele pachetului dvs."
5315
5316 #. type: Plain text
5317 #: debconf-devel.7:278
5318 msgid ""
5319 "Setting the title from a template means they are stored in the same place as "
5320 "the rest of the debconf questions, and allows them to be translated."
5321 msgstr ""
5322 "Definirea titlurilor dintr-un șablon înseamnă că acestea sunt stocate în "
5323 "același loc ca și restul întrebărilor debconf și permite traducerea lor."
5324
5325 #. type: TP
5326 #: debconf-devel.7:279
5327 #, no-wrap
5328 msgid "B<TITLE string>"
5329 msgstr "B<TITLE șir>"
5330
5331 #. type: Plain text
5332 #: debconf-devel.7:284
5333 msgid ""
5334 "This sets the title debconf displays to the user to the specified string. "
5335 "Use of the SETTITLE command is normally to be preferred as it allows for "
5336 "translation of the title."
5337 msgstr ""
5338 "Aceasta stabilește titlul pe care debconf îl afișează utilizatorului la "
5339 "șirul specificat. Utilizarea comenzii SETTITLE este în mod normal de "
5340 "preferat, deoarece permite traducerea titlului."
5341
5342 #. type: TP
5343 #: debconf-devel.7:284
5344 #, no-wrap
5345 msgid "B<INPUT priority question>"
5346 msgstr "B<INPUT prioritate întrebare>"
5347
5348 #. type: Plain text
5349 #: debconf-devel.7:291
5350 msgid ""
5351 "Ask debconf to prepare to display a question to the user. The question is "
5352 "not actually displayed until a GO command is issued; this lets several INPUT "
5353 "commands be given in series, to build up a set of questions, which might all "
5354 "be asked on a single screen."
5355 msgstr ""
5356 "Solicită debconf să se pregătească pentru a afișa o întrebare "
5357 "utilizatorului. Întrebarea nu este afișată efectiv până când nu este emisă o "
5358 "comandă GO; acest lucru permite ca mai multe comenzi INPUT să fie date în "
5359 "serie, pentru a construi un set de întrebări, care ar putea fi adresate "
5360 "toate pe un singur ecran."
5361
5362 #. type: Plain text
5363 #: debconf-devel.7:294
5364 msgid ""
5365 "The priority field tells debconf how important it is that this question be "
5366 "shown to the user. The priority values are:"
5367 msgstr ""
5368 "Câmpul de prioritate îi indică lui debconf cât de important este ca această "
5369 "întrebare să fie afișată utilizatorului. Valorile priorității sunt:"
5370
5371 #. type: Plain text
5372 #: debconf-devel.7:298
5373 msgid ""
5374 "Very trivial items that have defaults that will work in the vast majority of "
5375 "cases; only control freaks see these."
5376 msgstr ""
5377 "Elemente foarte banale care au valori implicite care vor funcționa în marea "
5378 "majoritate a cazurilor; doar obsedații de control le văd."
5379
5380 #. type: Plain text
5381 #: debconf-devel.7:301
5382 msgid "Normal items that have reasonable defaults."
5383 msgstr "Elemente normale care au valori implicite rezonabile."
5384
5385 #. type: Plain text
5386 #: debconf-devel.7:304
5387 msgid "Items that don't have a reasonable default."
5388 msgstr "Elemente care nu au o valoare implicită rezonabilă."
5389
5390 #. type: Plain text
5391 #: debconf-devel.7:307
5392 msgid "Items that will probably break the system without user intervention."
5393 msgstr ""
5394 "Elemente care probabil vor distruge sistemul fără intervenția utilizatorului."
5395
5396 #. type: Plain text
5397 #: debconf-devel.7:312
5398 msgid ""
5399 "Debconf decides if the question is actually displayed, based on its "
5400 "priority, and whether the user has seen it before, and which frontend is "
5401 "being used. If the question will not be displayed, debconf replies with code "
5402 "30."
5403 msgstr ""
5404 "Debconf decide dacă întrebarea este afișată efectiv, pe baza priorității "
5405 "sale, dacă utilizatorul a mai văzut-o înainte și ce interfață este "
5406 "utilizată. Dacă întrebarea nu va fi afișată, debconf răspunde cu codul 30."
5407
5408 #. type: TP
5409 #: debconf-devel.7:313
5410 #, no-wrap
5411 msgid "B<GO>"
5412 msgstr "B<GO>"
5413
5414 #. type: Plain text
5415 #: debconf-devel.7:318
5416 msgid ""
5417 "Tells debconf to display the accumulated set of questions (from INPUT "
5418 "commands) to the user."
5419 msgstr ""
5420 "Îi indică lui debconf să afișeze utilizatorului setul acumulat de întrebări "
5421 "(din comenzile INPUT)."
5422
5423 #. type: Plain text
5424 #: debconf-devel.7:321
5425 msgid ""
5426 "If the backup capability is supported and the user indicates they want to "
5427 "back up a step, debconf replies with code 30."
5428 msgstr ""
5429 "Dacă capacitatea de copiere de rezervă este acceptată și utilizatorul indică "
5430 "faptul că dorește să copieze de rezervă un pas, debconf răspunde cu codul 30."
5431
5432 #. type: TP
5433 #: debconf-devel.7:322
5434 #, no-wrap
5435 msgid "B<CLEAR>"
5436 msgstr "B<CLEAR>"
5437
5438 #. type: Plain text
5439 #: debconf-devel.7:326
5440 msgid ""
5441 "Clears the accumulated set of questions (from INPUT commands) without "
5442 "displaying them."
5443 msgstr ""
5444 "Șterge setul acumulat de întrebări (de la comenzile INPUT) fără a le afișa."
5445
5446 #. type: TP
5447 #: debconf-devel.7:326
5448 #, no-wrap
5449 msgid "B<BEGINBLOCK>"
5450 msgstr "B<BEGINBLOCK>"
5451
5452 #. type: TP
5453 #: debconf-devel.7:328
5454 #, no-wrap
5455 msgid "B<ENDBLOCK>"
5456 msgstr "B<ENDBLOCK>"
5457
5458 #. type: Plain text
5459 #: debconf-devel.7:336
5460 msgid ""
5461 "Some debconf frontends can display a number of questions to the user at "
5462 "once. Maybe in the future a frontend will even be able to group these "
5463 "questions into blocks on screen. BEGINBLOCK and ENDBLOCK can be placed "
5464 "around a set of INPUT commands to indicate blocks of questions (and blocks "
5465 "can even be nested). Since no debconf frontend is so sophisticated yet, "
5466 "these commands are ignored for now."
5467 msgstr ""
5468 "Unele interfețe debconf pot afișa utilizatorului un număr de întrebări "
5469 "simultan. Poate că în viitor o interfață va putea chiar să grupeze aceste "
5470 "întrebări în blocuri pe ecran. BEGINBLOCK și ENDBLOCK pot fi plasate în "
5471 "jurul unui set de comenzi INPUT pentru a indica blocuri de întrebări (iar "
5472 "blocurile pot fi chiar imbricate). Deoarece nicio interfață debconf nu este "
5473 "încă atât de sofisticată, aceste comenzi sunt ignorate pentru moment."
5474
5475 #. type: TP
5476 #: debconf-devel.7:336
5477 #, no-wrap
5478 msgid "B<STOP>"
5479 msgstr "B<STOP>"
5480
5481 #. type: Plain text
5482 #: debconf-devel.7:340
5483 msgid ""
5484 "This command tells debconf that you're done talking to it. Often debconf can "
5485 "detect termination of your program and this command is not necessary."
5486 msgstr ""
5487 "Această comandă îi indică lui debconf că ați terminat de dialogat cu el. "
5488 "Adesea, debconf poate detecta terminarea programului dvs. și această comandă "
5489 "nu este necesară."
5490
5491 #. type: TP
5492 #: debconf-devel.7:340
5493 #, no-wrap
5494 msgid "B<GET question>"
5495 msgstr "B<GET întrebare>"
5496
5497 #. type: Plain text
5498 #: debconf-devel.7:345
5499 msgid ""
5500 "After using INPUT and GO to display a question, you can use this command to "
5501 "get the value the user entered. The value is returned in the extended result "
5502 "code."
5503 msgstr ""
5504 "După ce utilizați INPUT și GO pentru a afișa o întrebare, puteți utiliza "
5505 "această comandă pentru a obține valoarea introdusă de utilizator. Valoarea "
5506 "este returnată în codul de rezultat extins."
5507
5508 #. type: TP
5509 #: debconf-devel.7:345
5510 #, no-wrap
5511 msgid "B<SET question value>"
5512 msgstr "B<SET întrebare valoare>"
5513
5514 #. type: Plain text
5515 #: debconf-devel.7:349
5516 msgid ""
5517 "This sets the value of a question, and it can be used to override the "
5518 "default value with something your program calculates on the fly."
5519 msgstr ""
5520 "Aceasta stabilește valoarea unei întrebări și poate fi utilizată pentru a "
5521 "înlocui valoarea implicită cu ceva ce programul dvs. calculează din mers."
5522
5523 #. type: TP
5524 #: debconf-devel.7:349
5525 #, no-wrap
5526 msgid "B<RESET question>"
5527 msgstr "B<RESET întrebare>"
5528
5529 #. type: Plain text
5530 #: debconf-devel.7:353
5531 msgid ""
5532 "This resets the question to its default value (as is specified in the "
5533 "'Default' field of its template)."
5534 msgstr ""
5535 "Aceasta readuce întrebarea la valoarea sa implicită (așa cum este "
5536 "specificată în câmpul „ Default ” al șablonului său)."
5537
5538 #. type: TP
5539 #: debconf-devel.7:353
5540 #, no-wrap
5541 msgid "B<SUBST question key value>"
5542 msgstr "B<SUBST întrebare cheie valoare>"
5543
5544 #. type: Plain text
5545 #: debconf-devel.7:362
5546 msgid ""
5547 "Questions can have substitutions embedded in their 'Description' and "
5548 "'Choices' fields (use of substitutions in 'Choices' fields is a bit of a "
5549 "hack though; a better mechanism will eventually be developed). These "
5550 "substitutions look like \"${key}\". When the question is displayed, the "
5551 "substitutions are replaced with their values. This command can be used to "
5552 "set the value of a substitution. This is useful if you need to display some "
5553 "message to the user that you can't hard-code in the templates file."
5554 msgstr ""
5555 "Întrebările pot avea substituții încorporate în câmpurile „Description” și "
5556 "„Choices” (utilizarea substituțiilor în câmpurile „Choices” este un pic de "
5557 "improvizație; un mecanism mai bun va fi dezvoltat în cele din urmă). Aceste "
5558 "substituții arată ca „${key}”. Atunci când întrebarea este afișată, "
5559 "substituțiile sunt înlocuite cu valorile lor. Această comandă poate fi "
5560 "utilizată pentru a defini valoarea unei substituții. Acest lucru este util "
5561 "dacă trebuie să afișați utilizatorului un mesaj pe care nu îl puteți "
5562 "codifica în interiorul codului din fișierul de șabloane."
5563
5564 #. type: Plain text
5565 #: debconf-devel.7:365
5566 msgid ""
5567 "Do not try to use SUBST to change the default value of a question; it won't "
5568 "work since there is a SET command explicitly for that purpose."
5569 msgstr ""
5570 "Nu încercați să utilizați SUBST pentru a schimba valoarea implicită a unei "
5571 "întrebări; nu va funcționa, deoarece există o comandă SET explicită pentru "
5572 "acest scop."
5573
5574 #. type: TP
5575 #: debconf-devel.7:365
5576 #, no-wrap
5577 msgid "B<FGET question flag>"
5578 msgstr "B<FGET întrebare fanion>"
5579
5580 #. type: Plain text
5581 #: debconf-devel.7:369
5582 msgid ""
5583 "Questions can have flags associated with them. The flags can have a value of "
5584 "\"true\" or \"false\". This command returns the value of a flag."
5585 msgstr ""
5586 "Întrebările pot avea asociate fanioane. Fanioanele pot avea o valoare de "
5587 "„true” sau „false”. Această comandă returnează valoarea unui fanion."
5588
5589 #. type: TP
5590 #: debconf-devel.7:369
5591 #, no-wrap
5592 msgid "B<FSET question flag value>"
5593 msgstr "B<FSET întrebare fanion valoare>"
5594
5595 #. type: Plain text
5596 #: debconf-devel.7:374
5597 msgid ""
5598 "This sets the value of a question's flag. The value must be either \"true\" "
5599 "or \"false\"."
5600 msgstr ""
5601 "Aceasta stabilește valoarea fanionului unei întrebări. Valoarea trebuie să "
5602 "fie „true” sau „false”."
5603
5604 #. type: Plain text
5605 #: debconf-devel.7:380
5606 msgid ""
5607 "One common flag is the \"seen\" flag. It is normally only set if a user has "
5608 "already seen a question. Debconf usually only displays questions to users if "
5609 "they have the seen flag set to \"false\" (or if it is reconfiguring a "
5610 "package). Sometimes you want the user to see a question again -- in these "
5611 "cases you can set the seen flag to false to force debconf to redisplay it."
5612 msgstr ""
5613 "Un fanion comun este fanionul „seen”. În mod normal, acesta este activat "
5614 "numai dacă un utilizator a văzut deja o întrebare. De obicei, Debconf "
5615 "afișează întrebările utilizatorilor numai dacă aceștia au fanionul B<seen> "
5616 "definit la „false” (sau dacă reconfigurează un pachet). Uneori doriți ca "
5617 "utilizatorul să vadă din nou o întrebare - în aceste cazuri, puteți defini "
5618 "fanionul B<seen> la „false” pentru a forța debconf să o afișeze din nou."
5619
5620 #. type: TP
5621 #: debconf-devel.7:381
5622 #, no-wrap
5623 msgid "B<METAGET question field>"
5624 msgstr "B<METAGET întrebare câmp>"
5625
5626 #. type: Plain text
5627 #: debconf-devel.7:385
5628 msgid ""
5629 "This returns the value of any field of a question's associated template (the "
5630 "Description, for example)."
5631 msgstr ""
5632 "Aceasta returnează valoarea oricărui câmp din șablonul asociat unei "
5633 "întrebări ( descrierea B<Description>, de exemplu)."
5634
5635 #. type: TP
5636 #: debconf-devel.7:385
5637 #, no-wrap
5638 msgid "B<REGISTER template question>"
5639 msgstr "B<REGISTER șablon întrebare>"
5640
5641 #. type: Plain text
5642 #: debconf-devel.7:391
5643 msgid ""
5644 "This creates a new question that is bound to a template. By default each "
5645 "template has an associated question with the same name. However, any number "
5646 "of questions can really be associated with a template, and this lets you "
5647 "create more such questions."
5648 msgstr ""
5649 "Aceasta creează o întrebare nouă care este legată de un șablon. În mod "
5650 "implicit, fiecare șablon are asociată o întrebare cu același nume. Cu toate "
5651 "acestea, orice număr de întrebări poate fi asociat cu un șablon, iar acest "
5652 "lucru vă permite să creați mai multe astfel de întrebări."
5653
5654 #. type: TP
5655 #: debconf-devel.7:391
5656 #, no-wrap
5657 msgid "B<UNREGISTER question>"
5658 msgstr "B<UNREGISTER întrebare>"
5659
5660 #. type: Plain text
5661 #: debconf-devel.7:394
5662 msgid "This removes a question from the database."
5663 msgstr "Aceasta elimină o întrebare din baza de date."
5664
5665 #. type: TP
5666 #: debconf-devel.7:394
5667 #, no-wrap
5668 msgid "B<PURGE>"
5669 msgstr "B<PURGE>"
5670
5671 #. type: Plain text
5672 #: debconf-devel.7:398
5673 msgid ""
5674 "Call this in your postrm when your package is purged. It removes all of your "
5675 "package's questions from debconf's database."
5676 msgstr ""
5677 "Apelați această comandă în scriptul dvs. „postrm” atunci când pachetul dvs. "
5678 "este purjat. Aceasta elimină toate întrebările pachetului dvs. din baza de "
5679 "date a debconf."
5680
5681 #. type: TP
5682 #: debconf-devel.7:398
5683 #, no-wrap
5684 msgid "B<X_LOADTEMPLATEFILE /path/to/templates [owner]>"
5685 msgstr "B<X_LOADTEMPLATEFILE /ruta/la/templates [proprietar]>"
5686
5687 #. type: Plain text
5688 #: debconf-devel.7:402
5689 msgid ""
5690 "This extension loads the specified template file into debconf's database. "
5691 "The owner defaults to the package that is being configured with debconf."
5692 msgstr ""
5693 "Această extensie încarcă fișierul șablon specificat în baza de date a "
5694 "debconf. Proprietarul este implicit pachetul care este configurat cu "
5695 "debconf."
5696
5697 #. type: Plain text
5698 #: debconf-devel.7:404
5699 msgid "Here is a simple example of the debconf protocol in action."
5700 msgstr "Iată un exemplu simplu de protocol debconf în acțiune."
5701
5702 #. type: Plain text
5703 #: debconf-devel.7:418
5704 #, no-wrap
5705 msgid ""
5706 " INPUT medium debconf/frontend\n"
5707 " 30 question skipped\n"
5708 " FSET debconf/frontend seen false\n"
5709 " 0 false\n"
5710 " INPUT high debconf/frontend\n"
5711 " 0 question will be asked\n"
5712 " GO\n"
5713 " [ Here debconf displays a question to the user. ]\n"
5714 " 0 ok\n"
5715 " GET no/such/question\n"
5716 " 10 no/such/question doesn't exist\n"
5717 " GET debconf/frontend\n"
5718 " 0 Dialog\n"
5719 msgstr ""
5720 " INPUT medium debconf/frontend\n"
5721 " 30 question skipped\n"
5722 " FSET debconf/frontend seen false\n"
5723 " 0 false\n"
5724 " INPUT high debconf/frontend\n"
5725 " 0 question will be asked\n"
5726 " GO\n"
5727 " [ Aici debconf afișează o întrebare pentru utilizator. ]\n"
5728 " 0 ok\n"
5729 " GET no/such/question\n"
5730 " 10 no/such/question doesn't exist\n"
5731 " GET debconf/frontend\n"
5732 " 0 Dialog\n"
5733
5734 #. type: SH
5735 #: debconf-devel.7:418
5736 #, no-wrap
5737 msgid "LIBRARIES"
5738 msgstr "BIBLIOTECI"
5739
5740 #. type: Plain text
5741 #: debconf-devel.7:422
5742 msgid ""
5743 "Setting things up so you can talk to debconf, and speaking the debconf "
5744 "protocol by hand is a little too much work, so some thin libraries exist to "
5745 "relieve this minor drudgery."
5746 msgstr ""
5747 "Configurarea lucrurilor astfel încât să puteți comunica cu debconf și să "
5748 "dialogați cu el prin intermediul protocolului debconf este un pic prea mult "
5749 "de lucru, așa că există câteva biblioteci mici pentru a ușura această "
5750 "corvoadă minoră."
5751
5752 #. type: Plain text
5753 #: debconf-devel.7:430
5754 msgid ""
5755 "For shell programming, there is the /usr/share/debconf/confmodule library, "
5756 "which you can source at the top of a shell script, and talk to debconf in a "
5757 "fairly natural way, using lower-case versions of the debconf protocol "
5758 "commands, that are prefixed with \"db_\" (ie, \"db_input\" and \"db_go\"). "
5759 "For details, see B<confmodule>(3) ."
5760 msgstr ""
5761 "Pentru programarea în shell, există biblioteca „/usr/share/debconf/"
5762 "confmodule”, pe care o puteți utiliza ca sursă în partea de sus a unui "
5763 "script de tip shell și care vă permite să comunicați cu debconf într-un mod "
5764 "destul de natural, utilizând versiuni cu minuscule ale comenzilor "
5765 "protocolului debconf, care sunt prefixate cu „db_” (de exemplu, „db_input” "
5766 "și „db_go”). Pentru detalii, consultați B<confmodule>(3) ."
5767
5768 #. type: Plain text
5769 #: debconf-devel.7:434
5770 msgid ""
5771 "Perl programmers can use the B<Debconf::Client::ConfModule>(3pm) perl "
5772 "module, and python programmers can use the debconf python module."
5773 msgstr ""
5774 "Programatorii Perl pot utiliza modulul perl "
5775 "B<Debconf::Client::ConfModule>(3pm), iar programatorii python pot utiliza "
5776 "modulul python debconf."
5777
5778 #. type: Plain text
5779 #: debconf-devel.7:438
5780 msgid ""
5781 "The rest of this manual will use the /usr/share/debconf/confmodule library "
5782 "in example shell scripts. Here is an example config script using that "
5783 "library, that just asks a question:"
5784 msgstr ""
5785 "Restul acestui manual va utiliza biblioteca „/usr/share/debconf/confmodule” "
5786 "în exemple de scripturi shell. Iată un exemplu de script de configurare care "
5787 "utilizează această bibliotecă, care pune doar o întrebare:"
5788
5789 #. type: Plain text
5790 #: debconf-devel.7:445
5791 #, no-wrap
5792 msgid ""
5793 " #!/bin/sh\n"
5794 " set -e\n"
5795 " . /usr/share/debconf/confmodule\n"
5796 " db_set mypackage/reboot-now false\n"
5797 " db_input high mypackage/reboot-now || true\n"
5798 " db_go || true\n"
5799 msgstr ""
5800 " #!/bin/sh\n"
5801 " set -e\n"
5802 " . /usr/share/debconf/confmodule\n"
5803 " db_set mypackage/reboot-now false\n"
5804 " db_input high mypackage/reboot-now || true\n"
5805 " db_go || true\n"
5806
5807 #. type: Plain text
5808 #: debconf-devel.7:450
5809 msgid ""
5810 "Notice the uses of \"|| true\" to prevent the script from dying if debconf "
5811 "decides it can't display a question, or the user tries to back up. In those "
5812 "situations, debconf returns a non-zero exit code, and since this shell "
5813 "script is set -e, an untrapped exit code would make it abort."
5814 msgstr ""
5815 "Observați utilizarea lui „|| true” pentru a preveni moartea scriptului dacă "
5816 "debconf decide că nu poate afișa o întrebare sau dacă utilizatorul încearcă "
5817 "să dea înapoi. În aceste situații, debconf returnează un cod de ieșire "
5818 "diferit de zero și, din moment ce acest script shell este definit cu „ -e”, "
5819 "un cod de ieșire nepreluat l-ar face să abandoneze."
5820
5821 #. type: Plain text
5822 #: debconf-devel.7:454
5823 msgid ""
5824 "And here is a corresponding postinst script, that uses the user's answer to "
5825 "the question to see if the system should be rebooted (a rather absurd "
5826 "example..):"
5827 msgstr ""
5828 "Și aici este un script „postinst” corespunzător, care utilizează răspunsul "
5829 "utilizatorului la întrebare pentru a vedea dacă sistemul ar trebui repornit "
5830 "(un exemplu destul de absurd..):"
5831
5832 #. type: Plain text
5833 #: debconf-devel.7:462
5834 #, no-wrap
5835 msgid ""
5836 " #!/bin/sh\n"
5837 " set -e\n"
5838 " . /usr/share/debconf/confmodule\n"
5839 " db_get mypackage/reboot-now\n"
5840 " if [ \"$RET\" = true ]; then\n"
5841 " \tshutdown -r now\n"
5842 " fi\n"
5843 msgstr ""
5844 " #!/bin/sh\n"
5845 " set -e\n"
5846 " . /usr/share/debconf/confmodule\n"
5847 " db_get mypackage/reboot-now\n"
5848 " if [ \"$RET\" = true ]; then\n"
5849 " \tshutdown -r now\n"
5850 " fi\n"
5851
5852 #. type: Plain text
5853 #: debconf-devel.7:465
5854 msgid ""
5855 "Notice the use of the $RET variable to get at the extended return code from "
5856 "the GET command, which holds the user's answer to the question."
5857 msgstr ""
5858 "Observați utilizarea variabilei $RET pentru a obține codul de răspuns extins "
5859 "de la comanda GET, care conține răspunsul utilizatorului la întrebare."
5860
5861 #. type: SH
5862 #: debconf-devel.7:465
5863 #, no-wrap
5864 msgid "THE POSTINST SCRIPT"
5865 msgstr "SCRIPTUL POSTINST"
5866
5867 #. type: Plain text
5868 #: debconf-devel.7:469
5869 msgid ""
5870 "The last section had an example of a postinst script that uses debconf to "
5871 "get the value of a question, and act on it. Here are some things to keep in "
5872 "mind when writing postinst scripts that use debconf:"
5873 msgstr ""
5874 "Ultima secțiune conținea un exemplu de script „postinst” care utilizează "
5875 "debconf pentru a obține valoarea unei întrebări și pentru a acționa în "
5876 "funcție de aceasta. Iată câteva lucruri de care trebuie să țineți cont "
5877 "atunci când scrieți scripturi „postinst” care utilizează debconf:"
5878
5879 #. type: Plain text
5880 #: debconf-devel.7:473
5881 msgid ""
5882 "Avoid asking questions in the postinst. Instead, the config script should "
5883 "ask questions using debconf, so that pre-configuration will work."
5884 msgstr ""
5885 "Evitați să puneți întrebări în „postinst”. În schimb, scriptul „config” ar "
5886 "trebui să pună întrebări utilizând debconf, astfel încât pre-configurarea să "
5887 "funcționeze."
5888
5889 #. type: Plain text
5890 #: debconf-devel.7:479
5891 msgid ""
5892 "Always source /usr/share/debconf/confmodule at the top of your postinst, "
5893 "even if you won't be running any db_* commands in it. This is required to "
5894 "make sure the config script gets a chance to run (see HACKS for details)."
5895 msgstr ""
5896 "Întotdeauna sursa „/usr/share/debconf/confmodule” în partea de sus a "
5897 "scriptului dvs. „postinst”, chiar dacă nu veți executa nicio comandă db_* în "
5898 "acesta. Acest lucru este necesar pentru a vă asigura că scriptul „config” "
5899 "are șansa de a rula (consultați secțiunea TRUCURI pentru detalii)."
5900
5901 #. type: Plain text
5902 #: debconf-devel.7:484
5903 msgid ""
5904 "Avoid outputting anything to stdout in your postinst, since that can confuse "
5905 "debconf, and postinst should not be verbose anyway. Output to stderr is ok, "
5906 "if you must."
5907 msgstr ""
5908 "Evitați să trimiteți ceva la ieșirea standard (stdout) în „postinst”, "
5909 "deoarece acest lucru poate crea confuzie în debconf, iar „postinst” nu ar "
5910 "trebui să fie oricum prea „vorbăreț”. Ieșirea la ieșirea de eroare standard "
5911 "este ok, dacă este necesar."
5912
5913 #. type: Plain text
5914 #: debconf-devel.7:489
5915 msgid ""
5916 "If your postinst launches a daemon, make sure you tell debconf to STOP at "
5917 "the end, since debconf can become a little confused about when your postinst "
5918 "is done otherwise."
5919 msgstr ""
5920 "Dacă scriptul dvs. „postinst” lansează un demon, asigurați-vă că îi indicați "
5921 "lui debconf să efectueze STOP la sfârșit, deoarece debconf poate deveni "
5922 "puțin confuz cu privire la momentul în care scriptul dvs. postinst este gata."
5923
5924 #. type: Plain text
5925 #: debconf-devel.7:494
5926 msgid ""
5927 "Make your postinst script accept a first parameter of \"reconfigure\". It "
5928 "can treat it just like \"configure\". This will be used in a later version "
5929 "of debconf to let postinsts know when they are reconfigured."
5930 msgstr ""
5931 "Asigurați-vă că scriptul „postinst” acceptă un prim parametru „reconfigure”. "
5932 "Acesta îl poate trata la fel ca „configure”. Acesta va fi utilizat într-o "
5933 "versiune ulterioară a debconf pentru a anunța scripturile „postinist” atunci "
5934 "când sunt reconfigurate."
5935
5936 #. type: SH
5937 #: debconf-devel.7:494
5938 #, no-wrap
5939 msgid "OTHER SCRIPTS"
5940 msgstr "ALTE SCRIPTURI"
5941
5942 #. type: Plain text
5943 #: debconf-devel.7:502
5944 msgid ""
5945 "Besides the config script and postinst, you can use debconf in any of the "
5946 "other maintainer scripts. Most commonly, you'll be using debconf in your "
5947 "postrm, to call the PURGE command when your package is purged, to clean out "
5948 "its entries in the debconf database. (This is automatically set up for you "
5949 "by B<dh_installdebconf>(1)B<,> by the way.)"
5950 msgstr ""
5951 "Pe lângă scripturile „config” și „postinst”, puteți utiliza debconf în "
5952 "oricare dintre celelalte scripturi ale întreținătorului. Cel mai frecvent, "
5953 "veți utiliza debconf în „postrm”, pentru a apela comanda PURGE atunci când "
5954 "pachetul dvs. este purjat, pentru a curăța intrările sale din baza de date "
5955 "debconf. (Apropo, acest lucru este configurat automat pentru dvs. de "
5956 "B<dh_installdebconf>(1)B<,>)."
5957
5958 #. type: Plain text
5959 #: debconf-devel.7:510
5960 msgid ""
5961 "A more involved use of debconf would be if you want to use it in the postrm "
5962 "when your package is purged, to ask a question about deleting something. Or "
5963 "maybe you find you need to use it in the preinst or prerm for some reason. "
5964 "All of these uses will work, though they'll probably involve asking "
5965 "questions and acting on the answers in the same program, rather than "
5966 "separating the two activities as is done in the config and postinst scripts."
5967 msgstr ""
5968 "O utilizare mai implicată a debconf ar fi dacă doriți să o utilizați în "
5969 "„postrm” atunci când pachetul dvs. este curățat, pentru a pune o întrebare "
5970 "despre ștergerea a ceva. Sau poate descoperiți că trebuie să îl folosiți în "
5971 "„preinst” sau „prerm” pentru un motiv oarecare. Toate aceste utilizări vor "
5972 "funcționa, deși vor implica probabil adresarea de întrebări și luarea de "
5973 "măsuri în funcție de răspunsuri în același program, mai degrabă decât "
5974 "separarea celor două activități, așa cum se face în scripturile „config” și "
5975 "„postinst”."
5976
5977 #. type: Plain text
5978 #: debconf-devel.7:515
5979 msgid ""
5980 "Note that if your package's sole use of debconf is in the postrm, you should "
5981 "make your package's postinst source /usr/share/debconf/confmodule, to give "
5982 "debconf a chance to load up your templates file into its database. Then the "
5983 "templates will be available when your package is being purged."
5984 msgstr ""
5985 "Rețineți că, dacă singura utilizare a debconf de către pachetul dvs. este în "
5986 "„postrm”, ar trebui să faceți ca scriptul „postinst” a pachetului dvs. să "
5987 "includă „/usr/share/debconf/confmodule”, pentru a da debconf o șansă de a "
5988 "încărca fișierul șabloanelor dvs. în baza sa de date. Apoi, șabloanele vor "
5989 "fi disponibile atunci când pachetul dvs. este purjat."
5990
5991 #. type: Plain text
5992 #: debconf-devel.7:522
5993 msgid ""
5994 "You can also use debconf in other, standalone programs. The issue to watch "
5995 "out for here is that debconf is not intended to be, and must not be used as "
5996 "a registry. This is unix after all, and programs are configured by files in /"
5997 "etc, not by some nebulous debconf database (that is only a cache anyway and "
5998 "might get blown away). So think long and hard before using debconf in a "
5999 "standalone program."
6000 msgstr ""
6001 "De asemenea, puteți utiliza debconf în alte programe de sine stătătoare. "
6002 "Problema la care trebuie să fiți atenți aici este că debconf nu este "
6003 "destinat să fie și nu trebuie să fie utilizat ca un registru. La urma urmei, "
6004 "acesta este unix, iar programele sunt configurate de fișiere din „/etc”, nu "
6005 "de o bază de date nebuloasă debconf (care oricum este doar o cache și ar "
6006 "putea fi distrusă). Așa că gândiți-vă bine înainte de a utiliza debconf într-"
6007 "un program autonom."
6008
6009 #. type: Plain text
6010 #: debconf-devel.7:527
6011 msgid ""
6012 "There are times when it can make sense, as in the apt-setup program which "
6013 "uses debconf to prompt the user in a manner consistent with the rest of the "
6014 "debian install process, and immediately acts on their answers to set up "
6015 "apt's sources.list."
6016 msgstr ""
6017 "Există momente în care poate avea sens, cum ar fi în programul apt-setup "
6018 "care utilizează debconf pentru a solicita utilizatorului o manieră "
6019 "consecventă cu restul procesului de instalare debian și acționează imediat "
6020 "în funcție de răspunsurile acestuia pentru a configura fișierul sources.list "
6021 "al apt."
6022
6023 #. type: SH
6024 #: debconf-devel.7:527
6025 #, no-wrap
6026 msgid "LOCALIZATION"
6027 msgstr "LOCALIZAREA"
6028
6029 #. type: Plain text
6030 #: debconf-devel.7:534
6031 msgid ""
6032 "Debconf supports localization of templates files. This is accomplished by "
6033 "adding more fields, with translated text in them. Any of the fields can be "
6034 "translated. For example, you might want to translate the description into "
6035 "Spanish. Just make a field named 'Description-es' that holds the "
6036 "translation. If a translated field is not available, debconf falls back to "
6037 "the normal English field."
6038 msgstr ""
6039 "Debconf acceptă traducerea fișierelor șablon. Acest lucru se realizează prin "
6040 "adăugarea mai multor câmpuri, cu text tradus în ele. Oricare dintre câmpuri "
6041 "poate fi tradus. De exemplu, ați putea dori să traduceți descrierea în "
6042 "română. Trebuie doar să creați un câmp numit „Description-ro” care să "
6043 "conțină traducerea. Dacă un câmp tradus nu este disponibil, debconf revine "
6044 "la câmpul normal în limba engleză."
6045
6046 #. type: Plain text
6047 #: debconf-devel.7:540
6048 msgid ""
6049 "Besides the 'Description' field, you should translate the 'Choices' field of "
6050 "a select or multiselect template. Be sure to list the translated choices in "
6051 "the same order as they appear in the main 'Choices' field. You do not need "
6052 "to translate the 'Default' field of a select or multiselect question, and "
6053 "the value of the question will be automatically returned in English."
6054 msgstr ""
6055 "Pe lângă câmpul „Description”, trebuie să traduceți câmpul „Choices” al unui "
6056 "șablon B<select> sau B<multiselect>. Asigurați-vă că listați opțiunile "
6057 "traduse în aceeași ordine în care apar în câmpul principal „Choices”. Nu "
6058 "este necesar să traduceți câmpul „Default” al unei întrebări B<select> sau "
6059 "B<multiselect>, iar valoarea întrebării va fi returnată automat în limba "
6060 "engleză."
6061
6062 #. type: Plain text
6063 #: debconf-devel.7:552
6064 msgid ""
6065 "You will find it easier to manage translations if you keep them in separate "
6066 "files; one file per translation. In the past, the B<debconf-getlang>(1) and "
6067 "B<debconf-mergetemplate>(1) programs were used to manage debian/template.ll "
6068 "files. This has been superseded by the B<po-debconf>(7) package, which lets "
6069 "you deal with debconf translations in .po files, just like any other "
6070 "translations. Your translators will thank you for using this new improved "
6071 "mechanism."
6072 msgstr ""
6073 "Vă va fi mai ușor să gestionați traducerile dacă le păstrați în fișiere "
6074 "separate; un fișier pentru fiecare traducere. În trecut, programele "
6075 "B<debconf-getlang>(1) și B<debconf-mergetemplate>(1) erau utilizate pentru a "
6076 "gestiona fișierele debian/template.ll. Acestea au fost înlocuite de pachetul "
6077 "B<po-debconf>(7), care vă permite să gestionați traducerile debconf în "
6078 "fișiere .po, la fel ca orice alte traduceri. Traducătorii dvs. vă vor "
6079 "mulțumi pentru utilizarea acestui nou mecanism îmbunătățit."
6080
6081 #. type: Plain text
6082 #: debconf-devel.7:558
6083 msgid ""
6084 "For the details on po-debconf, see its man page. If you're using debhelper, "
6085 "converting to po-debconf is as simple as running the B<debconf-"
6086 "gettextize>(1) command once, and adding a Build-Dependency on po-debconf "
6087 "and on debhelper (E<gt>= 4.1.13)."
6088 msgstr ""
6089 "Pentru detalii despre po-debconf, consultați pagina sa de manual. Dacă "
6090 "utilizați debhelper, convertirea la po-debconf este la fel de simplă ca și "
6091 "rularea comenzii B<debconf-gettextize>(1) o dată și adăugarea unui Build-"
6092 "Dependency în po-debconf și în debhelper (E<gt>= 4.1.13)."
6093
6094 #. type: SH
6095 #: debconf-devel.7:558
6096 #, no-wrap
6097 msgid "PUTTING IT ALL TOGETHER"
6098 msgstr "PUNÂND TOTUL CAP LA CAP"
6099
6100 #. type: Plain text
6101 #: debconf-devel.7:568
6102 msgid ""
6103 "So you have a config script, a templates file, a postinst script that uses "
6104 "debconf, and so on. Putting these pieces together into a debian package "
6105 "isn't hard. You can do it by hand, or can use B<dh_installdebconf>(1) which "
6106 "will merge your translated templates, copy the files into the right places "
6107 "for you, and can even generate the call to PURGE that should go in your "
6108 "postrm script. Make sure that your package depends on debconf (E<gt>= 0.5), "
6109 "since earlier versions were not compatible with everything described in this "
6110 "manual. And you're done."
6111 msgstr ""
6112 "Deci, aveți un script „config”, un fișier templates, un script „postinst” "
6113 "care utilizează debconf și așa mai departe. Punerea acestor piese împreună "
6114 "într-un pachet debian nu este dificilă. O puteți face manual sau puteți "
6115 "utiliza B<dh_installdebconf>(1), care va fuziona șabloanele traduse, va "
6116 "copia fișierele în locurile potrivite pentru dvs. și poate chiar genera "
6117 "apelul la PURGE care ar trebui să apară în scriptul „postrm”. Asigurați-vă "
6118 "că pachetul dvs. depinde de debconf (E<gt>= 0.5), deoarece versiunile "
6119 "anterioare nu erau compatibile cu tot ceea ce este descris în acest manual. "
6120 "Și ați terminat."
6121
6122 #. type: Plain text
6123 #: debconf-devel.7:571
6124 msgid ""
6125 "Well, except for testing, debugging, and actually using debconf for more "
6126 "interesting things than asking a few basic questions. For that, read on.."
6127 msgstr ""
6128 "Este în regulă, cu excepția testării, a depanării și a utilizării debconf "
6129 "pentru lucruri mai interesante decât adresarea unor întrebări de bază. "
6130 "Pentru asta, citiți mai departe.."
6131
6132 #. type: SH
6133 #: debconf-devel.7:571
6134 #, no-wrap
6135 msgid "DEBUGGING"
6136 msgstr "DEPANAREA"
6137
6138 #. type: Plain text
6139 #: debconf-devel.7:576
6140 msgid ""
6141 "So you have a package that's supposed to use debconf, but it doesn't quite "
6142 "work. Maybe debconf is just not asking that question you set up. Or maybe "
6143 "something weirder is happening; it spins forever in some kind of loop, or "
6144 "worse. Luckily, debconf has plenty of debugging facilities."
6145 msgstr ""
6146 "Deci, aveți un pachet care ar trebui să utilizeze debconf, dar nu prea "
6147 "funcționează. Poate că debconf pur și simplu nu pune întrebarea pe care ați "
6148 "stabilit-o. Sau poate se întâmplă ceva mai ciudat; se învârte la nesfârșit "
6149 "într-un fel de buclă, sau mai rău. Din fericire, debconf are o mulțime de "
6150 "facilități de depanare."
6151
6152 #. type: Plain text
6153 #: debconf-devel.7:583
6154 msgid ""
6155 "The first thing to reach for is the DEBCONF_DEBUG environment variable. If "
6156 "you set and export DEBCONF_DEBUG=developer, debconf will output to stderr a "
6157 "dump of the debconf protocol as your program runs. It'll look something like "
6158 "this -- the typo is made clear:"
6159 msgstr ""
6160 "Primul lucru pe care trebuie să îl căutați este variabila de mediu "
6161 "DEBCONF_DEBUG. Dacă definiți și exportați DEBCONF_DEBUG=developer, debconf "
6162 "va afișa la ieșirea de eroare standard o captură a protocolului debconf în "
6163 "timp ce programul dvs. rulează. Acesta va arăta cam așa - greșeala de "
6164 "tastare este evidențiată:"
6165
6166 #. type: Plain text
6167 #: debconf-devel.7:588
6168 #, no-wrap
6169 msgid ""
6170 " debconf (developer): E<lt>-- input high debconf/frontand\n"
6171 " debconf (developer): --E<gt> 10 \"debconf/frontand\" doesn't exist\n"
6172 " debconf (developer): E<lt>-- go\n"
6173 " debconf (developer): --E<gt> 0 ok\n"
6174 msgstr ""
6175 " debconf (developer): E<lt>-- input high debconf/frontand\n"
6176 " debconf (developer): --E<gt> 10 \"debconf/frontand\" doesn't exist\n"
6177 " debconf (developer): E<lt>-- go\n"
6178 " debconf (developer): --E<gt> 0 ok\n"
6179
6180 #. type: Plain text
6181 #: debconf-devel.7:592
6182 msgid ""
6183 "It's rather useful to use debconf's readline frontend when you're debugging "
6184 "(in the author's opinion), as the questions don't get in the way, and all "
6185 "the debugging output is easily preserved and logged."
6186 msgstr ""
6187 "Este destul de util să utilizați interfața „readline” a debconf atunci când "
6188 "depanați (în opinia autorului), deoarece întrebările nu vă încurcă, iar "
6189 "toate rezultatele de depanare sunt ușor de păstrat și de înregistrat."
6190
6191 #. type: TP
6192 #: debconf-devel.7:593
6193 #, no-wrap
6194 msgid "B<DEBCONF_C_VALUES>"
6195 msgstr "B<DEBCONF_C_VALUES>"
6196
6197 #. type: Plain text
6198 #: debconf-devel.7:599
6199 msgid ""
6200 "If this environment variable is set to 'true', the frontend will display the "
6201 "values in Choices-C fields (if present) of select and multiselect templates "
6202 "rather than the descriptive values."
6203 msgstr ""
6204 "Dacă această variabilă de mediu este definită la „true”, interfața va afișa "
6205 "valorile din câmpurile Choices-C (dacă sunt prezente) ale șabloanelor "
6206 "B<select> și B<multiselect> mai degrabă decât valorile descriptive."
6207
6208 #. type: TP
6209 #: debconf-devel.7:600
6210 #, no-wrap
6211 msgid "B<debconf-communicate>"
6212 msgstr "B<debconf-communicate>"
6213
6214 #. type: Plain text
6215 #: debconf-devel.7:606
6216 msgid ""
6217 "Another useful tool is the B<debconf-communicate>(1) program. Fire it up "
6218 "and you can speak the raw debconf protocol to debconf, interactively. This "
6219 "is a great way to try stuff out on the fly."
6220 msgstr ""
6221 "Un alt instrument util este programul B<debconf-communicate>(1). Porniți-l "
6222 "și puteți comunica cu protocolul debconf în mod interactiv cu debconf. "
6223 "Aceasta este o modalitate excelentă de a încerca lucruri din mers."
6224
6225 #. type: TP
6226 #: debconf-devel.7:606
6227 #, no-wrap
6228 msgid "B<debconf-show>"
6229 msgstr "B<debconf-show>"
6230
6231 #. type: Plain text
6232 #: debconf-devel.7:612
6233 msgid ""
6234 "If a user is reporting a problem, B<debconf-show>(1) can be used to dump "
6235 "out all the questions owned by your package, displaying their values and "
6236 "whether the user has seen them."
6237 msgstr ""
6238 "Dacă un utilizator raportează o problemă, B<debconf-show>(1) poate fi "
6239 "utilizat pentru a afișa toate întrebările deținute de pachetul dvs., afișând "
6240 "valorile acestora și dacă utilizatorul le-a văzut."
6241
6242 #. type: TP
6243 #: debconf-devel.7:612
6244 #, no-wrap
6245 msgid "B<.debconfrc>"
6246 msgstr "B<.debconfrc>"
6247
6248 #. type: Plain text
6249 #: debconf-devel.7:623
6250 msgid ""
6251 "To avoid the often tedious build/install/debug cycle, it can be useful to "
6252 "load up your templates with B<debconf-loadtemplate>(1) and run your config "
6253 "script by hand with the B<debconf>(1) command. However, you still have to "
6254 "do that as root, right? Not so good. And ideally you'd like to be able to "
6255 "see what a fresh installation of your package looks like, with a clean "
6256 "debconf database."
6257 msgstr ""
6258 "Pentru a evita ciclul adesea plictisitor de compilare/ instalare/depanare, "
6259 "poate fi util să vă încărcați șabloanele cu B<debconf-loadtemplate>(1) și să "
6260 "vă rulați manual scriptul „config” cu comanda B<debconf>(1). Cu toate "
6261 "acestea, trebuie să faceți toate acestea ca root, nu? Nu este prea grozav. "
6262 "Și ideal ar fi să puteți vedea cum arată o instalare proaspătă a pachetului "
6263 "dumneavoastră, cu o bază de date debconf curată."
6264
6265 #. type: Plain text
6266 #: debconf-devel.7:629
6267 msgid ""
6268 "It turns out that if you set up a ~/.debconfrc file for a normal user, "
6269 "pointing at a personal config.dat and template.dat for the user, you can "
6270 "load up templates and run config scripts all you like, without any root "
6271 "access. If you want to start over with a clean database, just blow away the "
6272 "*.dat files."
6273 msgstr ""
6274 "Se pare că, dacă configurați un fișier „~/.debconfrc” pentru un utilizator "
6275 "normal, care indică un fișier config.dat și template.dat personal pentru "
6276 "utilizator, puteți încărca șabloane și rula scripturi „config” cât doriți, "
6277 "fără acces root. Dacă doriți să începeți din nou cu o bază de date curată, "
6278 "pur și simplu îndepărtați fișierele *.dat."
6279
6280 #. type: Plain text
6281 #: debconf-devel.7:634
6282 msgid ""
6283 "For details about setting this up, see B<debconf.conf>(5)B<,> and note that /"
6284 "etc/debconf.conf makes a good template for a personal ~/.debconfrc file."
6285 msgstr ""
6286 "Pentru detalii despre această configurare, consultați B<debconf.conf>(5)B<,> "
6287 "și rețineți că „/etc/debconf.conf” este un model bun pentru un fișier "
6288 "„~/.debconfrc” personal."
6289
6290 #. type: SH
6291 #: debconf-devel.7:635
6292 #, no-wrap
6293 msgid "ADVANCED PROGRAMMING WITH DEBCONF"
6294 msgstr "PROGRAMARE AVANSATĂ CU DEBCONF"
6295
6296 #. type: SS
6297 #: debconf-devel.7:636
6298 #, no-wrap
6299 msgid "Config file handling"
6300 msgstr "Gestionarea fișierelor de configurare"
6301
6302 #. type: Plain text
6303 #: debconf-devel.7:643
6304 msgid ""
6305 "Many of you seem to want to use debconf to help manage config files that are "
6306 "part of your package. Perhaps there is no good default to ship in a "
6307 "conffile, and so you want to use debconf to prompt the user, and write out a "
6308 "config file based on their answers. That seems easy enough to do, but then "
6309 "you consider upgrades, and what to do when someone modifies the config file "
6310 "you generate, and dpkg-reconfigure, and ..."
6311 msgstr ""
6312 "Mulți dintre dvs. par să dorească să utilizeze debconf pentru a ajuta la "
6313 "gestionarea fișierelor de configurare care fac parte din pachetul dvs. Poate "
6314 "că nu există o valoare implicită bună pentru a fi livrată într-un pachet și, "
6315 "prin urmare, doriți să utilizați debconf pentru a întreba utilizatorul și a "
6316 "scrie un fișier de configurare pe baza răspunsurilor sale. Acest lucru pare "
6317 "destul de ușor de făcut, dar apoi vă gândiți la actualizări și ce să faceți "
6318 "atunci când cineva modifică fișierul de configurare pe care îl generați, și "
6319 "dpkg-reconfigure, și ..."
6320
6321 #. type: Plain text
6322 #: debconf-devel.7:651
6323 msgid ""
6324 "There are a lot of ways to do this, and most of them are wrong, and will "
6325 "often earn you annoyed bug reports. Here is one right way to do it. It "
6326 "assumes that your config file is really just a series of shell variables "
6327 "being set, with comments in between, and so you can just source the file to "
6328 "\"load\" it. If you have a more complicated format, reading (and writing) "
6329 "it becomes a bit trickier."
6330 msgstr ""
6331 "Există o mulțime de modalități de a face acest lucru, iar cele mai multe "
6332 "dintre ele sunt greșite și vă vor aduce deseori rapoarte de eroare "
6333 "enervante. Iată o modalitate corectă de a face acest lucru. Aceasta "
6334 "presupune că fișierul dvs. de configurare este de fapt doar o serie de "
6335 "variabile shell care trebuiesc definite, cu comentarii între ele, și astfel "
6336 "tot ce aveți de făcut, este doar să includeți sursa fișierului (ce conține "
6337 "valorile acestor variabile) pentru a-l „încărca”. Dacă aveți un format mai "
6338 "complicat, citirea (și scrierea) acestuia devine un pic mai complicată."
6339
6340 #. type: Plain text
6341 #: debconf-devel.7:653
6342 msgid "Your config script will look something like this:"
6343 msgstr "Scriptul dvs. de configurare va arăta cam așa:"
6344
6345 #. type: Plain text
6346 #: debconf-devel.7:658 debconf-devel.7:680
6347 #, no-wrap
6348 msgid ""
6349 " #!/bin/sh\n"
6350 " CONFIGFILE=/etc/foo.conf\n"
6351 " set -e\n"
6352 " . /usr/share/debconf/confmodule\n"
6353 msgstr ""
6354 " #!/bin/sh\n"
6355 " CONFIGFILE=/etc/foo.conf\n"
6356 " set -e\n"
6357 " . /usr/share/debconf/confmodule\n"
6358
6359 #. type: Plain text
6360 #: debconf-devel.7:662
6361 #, no-wrap
6362 msgid ""
6363 " # Load config file, if it exists.\n"
6364 " if [ -e $CONFIGFILE ]; then\n"
6365 " \t. $CONFIGFILE || true\n"
6366 msgstr ""
6367 " # Încarcă fișierul de configurare, dacă există.\n"
6368 " if [ -e $CONFIGFILE ]; then\n"
6369 " \t. $CONFIGFILE || true\n"
6370
6371 #. type: Plain text
6372 #: debconf-devel.7:668
6373 #, no-wrap
6374 msgid ""
6375 " \t# Store values from config file into\n"
6376 " \t# debconf db.\n"
6377 " \tdb_set mypackage/foo \"$FOO\"\n"
6378 " \tdb_set mypackage/bar \"$BAR\"\n"
6379 " fi\n"
6380 msgstr ""
6381 " \t# Stochează valorile din fișierul de configurare\n"
6382 " \t# în debconf db.\n"
6383 " \tdb_set mypackage/foo \"$FOO\"\n"
6384 " \tdb_set mypackage/bar \"$BAR\"\n"
6385 " fi\n"
6386
6387 #. type: Plain text
6388 #: debconf-devel.7:673
6389 #, no-wrap
6390 msgid ""
6391 " # Ask questions.\n"
6392 " db_input medium mypackage/foo || true\n"
6393 " db_input medium mypackage/bar || true\n"
6394 " db_go || true\n"
6395 msgstr ""
6396 " # Pune întrebări.\n"
6397 " db_input medium mypackage/foo || true\n"
6398 " db_input medium mypackage/bar || true\n"
6399 " db_go || true\n"
6400
6401 #. type: Plain text
6402 #: debconf-devel.7:675
6403 msgid "And the postinst will look something like this:"
6404 msgstr "Iar scriptul „postinst” va arăta cam așa:"
6405
6406 #. type: Plain text
6407 #: debconf-devel.7:689
6408 #, no-wrap
6409 msgid ""
6410 " # Generate config file, if it doesn't exist.\n"
6411 " # An alternative is to copy in a template\n"
6412 " # file from elsewhere.\n"
6413 " if [ ! -e $CONFIGFILE ]; then\n"
6414 " \techo \"# Config file for my package\" E<gt> $CONFIGFILE\n"
6415 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6416 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6417 " fi\n"
6418 msgstr ""
6419 " # Generează fișierul de configurare, dacă acesta nu există.\n"
6420 " # O alternativă este să copiați un fișier șablon din altă parte.\n"
6421 " if [ ! -e $CONFIGFILE ]; then\n"
6422 " \techo \"# Fișierul de configurare pentru pachetul meu\" E<gt> $CONFIGFILE\n"
6423 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6424 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6425 " fi\n"
6426
6427 #. type: Plain text
6428 #: debconf-devel.7:699
6429 #, no-wrap
6430 msgid ""
6431 " # Substitute in the values from the debconf db.\n"
6432 " # There are obvious optimizations possible here.\n"
6433 " # The cp before the sed ensures we do not mess up\n"
6434 " # the config file's ownership and permissions.\n"
6435 " db_get mypackage/foo\n"
6436 " FOO=\"$RET\"\n"
6437 " db_get mypackage/bar\n"
6438 " BAR=\"$RET\"\n"
6439 " cp -a -f $CONFIGFILE $CONFIGFILE.tmp\n"
6440 msgstr ""
6441 " # Înlocuiește valorile din db debconf.\n"
6442 " # Sunt posibile optimizări evidente aici.\n"
6443 " # «cp» înainte de «sed» ne asigură că nu încurcăm\n"
6444 " # proprietarul și permisiunile fișierului de configurare.\n"
6445 " # the config file's ownership and permissions.\n"
6446 " db_get mypackage/foo\n"
6447 " FOO=\"$RET\"\n"
6448 " db_get mypackage/bar\n"
6449 " BAR=\"$RET\"\n"
6450 " cp -a -f $CONFIGFILE $CONFIGFILE.tmp\n"
6451
6452 #. type: Plain text
6453 #: debconf-devel.7:706
6454 #, no-wrap
6455 msgid ""
6456 " # If the admin deleted or commented some variables but then set\n"
6457 " # them via debconf, (re-)add them to the conffile.\n"
6458 " test -z \"$FOO\" || grep -Eq '^ *FOO=' $CONFIGFILE || \\e\n"
6459 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6460 " test -z \"$BAR\" || grep -Eq '^ *BAR=' $CONFIGFILE || \\e\n"
6461 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6462 msgstr ""
6463 " # Dacă administratorul a șters sau a comentat unele variabile,\n"
6464 " # dar apoi le-a definit prin debconf, (re)adăugați-le în conffile.\n"
6465 " test -z \"$FOO\" || grep -Eq '^ *FOO=' $CONFIGFILE || \\e\n"
6466 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6467 " test -z \"$BAR\" || grep -Eq '^ *BAR=' $CONFIGFILE || \\e\n"
6468 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6469
6470 #. type: Plain text
6471 #: debconf-devel.7:711
6472 #, no-wrap
6473 msgid ""
6474 " sed -e \"s/^ *FOO=.*/FOO=\\e\"$FOO\\e\"/\" \\e\n"
6475 " -e \"s/^ *BAR=.*/BAR=\\e\"$BAR\\e\"/\" \\e\n"
6476 " E<lt> $CONFIGFILE E<gt> $CONFIGFILE.tmp\n"
6477 " mv -f $CONFIGFILE.tmp $CONFIGFILE\n"
6478 msgstr ""
6479 " sed -e \"s/^ *FOO=.*/FOO=\\e\"$FOO\\e\"/\" \\e\n"
6480 " -e \"s/^ *BAR=.*/BAR=\\e\"$BAR\\e\"/\" \\e\n"
6481 " E<lt> $CONFIGFILE E<gt> $CONFIGFILE.tmp\n"
6482 " mv -f $CONFIGFILE.tmp $CONFIGFILE\n"
6483
6484 #. type: Plain text
6485 #: debconf-devel.7:719
6486 msgid ""
6487 "Consider how these two scripts handle all the cases. On fresh installs the "
6488 "questions are asked by the config script, and a new config file generated by "
6489 "the postinst. On upgrades and reconfigures, the config file is read in, and "
6490 "the values in it are used to change the values in the debconf database, so "
6491 "the admin's manual changes are not lost. The questions are asked again (and "
6492 "may or may not be displayed). Then the postinst substitutes the values back "
6493 "into the config file, leaving the rest of it unchanged."
6494 msgstr ""
6495 "Luați în considerare modul în care aceste două scripturi tratează toate "
6496 "cazurile. La noile instalări, întrebările sunt adresate de scriptul "
6497 "„config”, iar un nou fișier se configurare este generat de „postinst”. La "
6498 "actualizări și reconfigurări, fișierul de configurare este citit, iar "
6499 "valorile din acesta sunt utilizate pentru a modifica valorile din baza de "
6500 "date debconf, astfel încât modificările manuale ale administratorului să nu "
6501 "fie pierdute. Întrebările sunt puse din nou (și pot fi afișate sau nu). Apoi "
6502 "„postinst” înlocuiește valorile înapoi în fișierul de configurare, lăsând "
6503 "restul acestuia neschimbat."
6504
6505 #. type: SS
6506 #: debconf-devel.7:719
6507 #, no-wrap
6508 msgid "Letting the user back up"
6509 msgstr "Permițând utilizatorului să revină la întrebarea anterioară"
6510
6511 #. type: Plain text
6512 #: debconf-devel.7:725
6513 msgid ""
6514 "Few things are more frustrating when using a system like debconf than being "
6515 "asked a question, and answering it, then moving on to another screen with a "
6516 "new question on it, and realizing that hey, you made a mistake, with that "
6517 "last question, and you want to go back to it, and discovering that you can't."
6518 msgstr ""
6519 "Puține lucruri sunt mai frustrante atunci când folosești un sistem precum "
6520 "debconf decât să ți se pună o întrebare, să răspunzi la ea, apoi să treci la "
6521 "un alt ecran cu o nouă întrebare pe el și să-ți dai seama că ai făcut o "
6522 "greșeală cu ultima întrebare și vrei să te întorci la ea și să descoperi că "
6523 "nu poți."
6524
6525 #. type: Plain text
6526 #: debconf-devel.7:731
6527 msgid ""
6528 "Since debconf is driven by your config script, it can't jump back to a "
6529 "previous question on its own but with a little help from you, it can "
6530 "accomplish this feat. The first step is to make your config script let "
6531 "debconf know it is capable of handling the user pressing a back button. You "
6532 "use the CAPB command to do this, passing backup as a parameter."
6533 msgstr ""
6534 "Deoarece debconf este condus de scriptul dvs. de configurare, acesta nu "
6535 "poate reveni singur la o întrebare anterioară, dar cu puțin ajutor din "
6536 "partea dvs., poate realiza această „performanță”. Primul pas este să faceți "
6537 "ca scriptul dvs. de configurare să informeze debconf că este capabil să "
6538 "gestioneze apăsarea unui buton înapoi de către utilizator. Utilizați comanda "
6539 "CAPB pentru a face acest lucru, trecând „backup” ca parametru."
6540
6541 #. type: Plain text
6542 #: debconf-devel.7:735
6543 msgid ""
6544 "Then after each GO command, you must test to see if the user asked to back "
6545 "up (debconf returns a code of 30), and if so jump back to the previous "
6546 "question."
6547 msgstr ""
6548 "Apoi, după fiecare comandă GO, trebuie să verificați dacă utilizatorul a "
6549 "cerut să revină la întrebarea anterioară (debconf returnează un cod de 30) "
6550 "și, în caz afirmativ, să săriți înapoi la întrebarea anterioară."
6551
6552 #. type: Plain text
6553 #: debconf-devel.7:741
6554 msgid ""
6555 "There are several ways to write the control structures of your program so it "
6556 "can jump back to previous questions when necessary. You can write goto-laden "
6557 "spaghetti code. Or you can create several functions and use recursion. But "
6558 "perhaps the cleanest and easiest way is to construct a state machine. Here "
6559 "is a skeleton of a state machine that you can fill out and expand."
6560 msgstr ""
6561 "Există mai multe moduri de a scrie structurile de control ale programului "
6562 "dvs. astfel încât acesta să poată reveni la întrebările anterioare atunci "
6563 "când este necesar. Puteți scrie cod „spaghetti” încărcat de goto-uri. Sau "
6564 "puteți crea mai multe funcții și folosi recursivitatea. Dar poate cea mai "
6565 "curată și mai ușoară modalitate este să construiți o mașină de stare. Iată "
6566 "un schelet de mașină de stare pe care îl puteți completa și extinde."
6567
6568 #. type: Plain text
6569 #: debconf-devel.7:746
6570 #, no-wrap
6571 msgid ""
6572 " #!/bin/sh\n"
6573 " set -e\n"
6574 " . /usr/share/debconf/confmodule\n"
6575 " db_capb backup\n"
6576 msgstr ""
6577 " #!/bin/sh\n"
6578 " set -e\n"
6579 " . /usr/share/debconf/confmodule\n"
6580 " db_capb backup\n"
6581
6582 #. type: Plain text
6583 #: debconf-devel.7:773
6584 #, no-wrap
6585 msgid ""
6586 " STATE=1\n"
6587 " while true; do\n"
6588 " \tcase \"$STATE\" in\n"
6589 " \t1)\n"
6590 " \t\t# Two unrelated questions.\n"
6591 " \t\tdb_input medium my/question || true\n"
6592 " \t\tdb_input medium my/other_question || true\n"
6593 " \t;;\n"
6594 " \t2)\n"
6595 " \t\t# Only ask this question if the\n"
6596 " \t\t# first question was answered in\n"
6597 " \t\t# the affirmative.\n"
6598 " \tdb_get my/question\n"
6599 " \t\tif [ \"$RET\" = \"true\" ]; then\n"
6600 " \t\t\tdb_input medium my/dep_question || true\n"
6601 " \t\tfi\n"
6602 " \t;;\n"
6603 " \t*)\n"
6604 " \t\t# The default case catches when $STATE is greater than the\n"
6605 " \t\t# last implemented state, and breaks out of the loop. This\n"
6606 " \t\t# requires that states be numbered consecutively from 1\n"
6607 " \t\t# with no gaps, as the default case will also be entered\n"
6608 " \t\t# if there is a break in the numbering\n"
6609 " \t\tbreak # exits the enclosing \"while\" loop\n"
6610 " \t;;\n"
6611 " \tesac\n"
6612 msgstr ""
6613 " STATE=1\n"
6614 " while true; do\n"
6615 " \tcase \"$STATE\" in\n"
6616 " \t1)\n"
6617 " \t\t# Două întrebări care nu au legătură.\n"
6618 " \t\tdb_input medium my/question || true\n"
6619 " \t\tdb_input medium my/other_question || true\n"
6620 " \t;;\n"
6621 " \t2)\n"
6622 " \t\t# Puneți această întrebare numai dacă\n"
6623 " \t\t# răspunsul la prima întrebare a fost\n"
6624 " \t\t# afirmativ.\n"
6625 " \tdb_get my/question\n"
6626 " \t\tif [ \"$RET\" = \"true\" ]; then\n"
6627 " \t\t\tdb_input medium my/dep_question || true\n"
6628 " \t\tfi\n"
6629 " \t;;\n"
6630 " \t*)\n"
6631 " \t\t# Cazul implicit este detectat atunci când $STATE este mai mare\n"
6632 " \t\t# decât ultima stare implementată și iese din buclă. Acest lucru\n"
6633 " \t\t# necesită ca stările să fie numerotate consecutiv de la 1 fără\n"
6634 " \t\t# întreruperi, deoarece cazul implicit va fi introdus și dacă există\n"
6635 " \t\t# o întrerupere în numerotare\n"
6636 " \t\tbreak # iese din bucla „while”.\n"
6637 " \t;;\n"
6638 " \tesac\n"
6639
6640 #. type: Plain text
6641 #: debconf-devel.7:780
6642 #, no-wrap
6643 msgid ""
6644 " \tif db_go; then\n"
6645 " \t\tSTATE=$((STATE + 1))\n"
6646 " \telse\n"
6647 " \t\tSTATE=$((STATE - 1))\n"
6648 " \tfi\n"
6649 " done\n"
6650 msgstr ""
6651 " \tif db_go; then\n"
6652 " \t\tSTATE=$((STATE + 1))\n"
6653 " \telse\n"
6654 " \t\tSTATE=$((STATE - 1))\n"
6655 " \tfi\n"
6656 " done\n"
6657
6658 #. type: Plain text
6659 #: debconf-devel.7:791
6660 #, no-wrap
6661 msgid ""
6662 " if [ $STATE -eq 0 ]; then\n"
6663 " \t# The user has asked to back up from the first\n"
6664 " \t# question. This case is problematical. Regular\n"
6665 " \t# dpkg and apt package installation isn't capable\n"
6666 " \t# of backing up questions between packages as this\n"
6667 " \t# is written, so this will exit leaving the package\n"
6668 " \t# unconfigured - probably the best way to handle\n"
6669 " \t# the situation.\n"
6670 " \texit 10\n"
6671 " fi\n"
6672 msgstr ""
6673 " if [ $STATE -eq 0 ]; then\n"
6674 " \t# Utilizatorul a cerut să revină de la prima întrebare.\n"
6675 " \t# Acest caz este problematic. Instalarea obișnuită a\n"
6676 " \t# pachetelor dpkg și apt nu este capabilă să facă o\n"
6677 " \t# copie de rezervă a întrebărilor între pachete, așa\n"
6678 " \t# cum este scris acest lucru, astfel încât va ieși\n"
6679 " \t# lăsând pachetul neconfigurat - probabil cel mai\n"
6680 " \t# bun mod de a gestiona situația.\n"
6681 " \texit 10\n"
6682 " fi\n"
6683
6684 #. type: Plain text
6685 #: debconf-devel.7:796
6686 msgid ""
6687 "Note that if all your config script does is ask a few unrelated questions, "
6688 "then there is no need for the state machine. Just ask them all, and GO; "
6689 "debconf will do its best to present them all in one screen, and the user "
6690 "won't need to back up."
6691 msgstr ""
6692 "Rețineți că, dacă scriptul dvs. de configurare nu face decât să pună câteva "
6693 "întrebări fără legătură între ele, atunci nu este nevoie de mașina de stare. "
6694 "Doar puneți-le pe toate și „GO”; debconf va face tot posibilul să le "
6695 "prezinte pe toate într-un singur ecran, iar utilizatorul nu va trebui să se "
6696 "întoarcă."
6697
6698 #. type: SS
6699 #: debconf-devel.7:796
6700 #, no-wrap
6701 msgid "Preventing infinite loops"
6702 msgstr "Prevenirea buclelor infinite"
6703
6704 #. type: Plain text
6705 #: debconf-devel.7:800
6706 msgid ""
6707 "One gotcha with debconf comes up if you have a loop in your config script. "
6708 "Suppose you're asking for input and validating it, and looping if it's not "
6709 "valid:"
6710 msgstr ""
6711 "O problemă cu debconf apare dacă aveți o buclă în scriptul de configurare. "
6712 "Să presupunem că solicitați o intrare și o validați, iar dacă aceasta nu "
6713 "este validă, faceți o buclă:"
6714
6715 #. type: Plain text
6716 #: debconf-devel.7:810
6717 #, no-wrap
6718 msgid ""
6719 " ok=''\n"
6720 " do while [ ! \"$ok\" ];\n"
6721 " \tdb_input low foo/bar || true\n"
6722 " \tdb_go || true\n"
6723 " \tdb_get foo/bar\n"
6724 " \tif [ \"$RET\" ]; then\n"
6725 " \t\tok=1\n"
6726 " \tfi\n"
6727 " done\n"
6728 msgstr ""
6729 " ok=''\n"
6730 " do while [ ! \"$ok\" ];\n"
6731 " \tdb_input low foo/bar || true\n"
6732 " \tdb_go || true\n"
6733 " \tdb_get foo/bar\n"
6734 " \tif [ \"$RET\" ]; then\n"
6735 " \t\tok=1\n"
6736 " \tfi\n"
6737 " done\n"
6738
6739 #. type: Plain text
6740 #: debconf-devel.7:817
6741 msgid ""
6742 "This looks ok at first glance. But consider what happens if the value of foo/"
6743 "bar is \"\" when this loop is entered, and the user has their priority set "
6744 "high, or is using a non-interactive frontend, and so they are not really "
6745 "asked for input. The value of foo/bar is not changed by the db_input, and so "
6746 "it fails the test and loops. And loops ..."
6747 msgstr ""
6748 "Acest lucru pare în regulă la prima vedere. Dar gândiți-vă ce se întâmplă "
6749 "dacă valoarea lui foo/bar este „” atunci când se intră în această buclă, iar "
6750 "utilizatorul are stabilită o prioritate ridicată sau utilizează o interfață "
6751 "neinteractivă și, prin urmare, nu i se solicită cu adevărat un răspuns. "
6752 "Valoarea lui foo/bar nu este modificată de db_input și, prin urmare, nu "
6753 "trece testul și intră în buclă. Și bucle ..."
6754
6755 #. type: Plain text
6756 #: debconf-devel.7:823
6757 msgid ""
6758 "One fix for this is to make sure that before the loop is entered, the value "
6759 "of foo/bar is set to something that will pass the test in the loop. So for "
6760 "example if the default value of foo/bar is \"1\", then you could RESET foo/"
6761 "bar just before entering the loop."
6762 msgstr ""
6763 "O soluție este să vă asigurați că, înainte de a intra în buclă, valoarea foo/"
6764 "bar este stabilită la ceva care va trece testul în buclă. Astfel, de "
6765 "exemplu, dacă valoarea implicită a foo/bar este „1”, atunci puteți pune "
6766 "RESET foo/bar chiar înainte de a intra în buclă."
6767
6768 #. type: Plain text
6769 #: debconf-devel.7:827
6770 msgid ""
6771 "Another fix is to check the return code of the INPUT command. If it is 30 "
6772 "then the user is not being shown the question you asked them, and you should "
6773 "break out of the loop."
6774 msgstr ""
6775 "O altă soluție este să verificați codul de răspuns al comenzii INPUT. Dacă "
6776 "este 30, atunci utilizatorului nu i se arată întrebarea pe care i-ați pus-o "
6777 "și ar trebui să ieșiți din buclă."
6778
6779 #. type: SS
6780 #: debconf-devel.7:827
6781 #, no-wrap
6782 msgid "Choosing among related packages"
6783 msgstr "Alegerea dintre pachetele conexe"
6784
6785 #. type: Plain text
6786 #: debconf-devel.7:832
6787 msgid ""
6788 "Sometimes a set of related packages can be installed, and you want to prompt "
6789 "the user which of the set should be used by default. Examples of such sets "
6790 "are window managers, or ispell dictionary files."
6791 msgstr ""
6792 "Uneori poate fi instalat un set de pachete conexe și doriți să întrebați "
6793 "utilizatorul care dintre acestea ar trebui să fie utilizate în mod implicit. "
6794 "Exemple de astfel de seturi sunt administratorii de ferestre sau fișierele "
6795 "de dicționar ispell."
6796
6797 #. type: Plain text
6798 #: debconf-devel.7:838
6799 msgid ""
6800 "While it would be possible for each package in the set to simply prompt, "
6801 "\"Should this package be default?\", this leads to a lot of repetitive "
6802 "questions if several of the packages are installed. It's possible with "
6803 "debconf to present a list of all the packages in the set and allow the user "
6804 "to choose between them. Here's how."
6805 msgstr ""
6806 "Deși ar fi posibil ca fiecare pachet din set să solicite pur și simplu "
6807 "„Acest pachet ar trebui să fie implicit?”, acest lucru duce la o mulțime de "
6808 "întrebări repetitive dacă sunt instalate mai multe pachete. Este posibil ca "
6809 "debconf să prezinte o listă a tuturor pachetelor din set și să permită "
6810 "utilizatorului să aleagă între ele. Iată cum."
6811
6812 #. type: Plain text
6813 #: debconf-devel.7:841
6814 msgid ""
6815 "Make all the packages in the set use a shared template. Something like this:"
6816 msgstr ""
6817 "Faceți ca toate pachetele din set să utilizeze un șablon comun. Ceva de "
6818 "genul acesta:"
6819
6820 #. type: Plain text
6821 #: debconf-devel.7:848
6822 #, no-wrap
6823 msgid ""
6824 " Template: shared/window-manager\n"
6825 " Type: select\n"
6826 " Choices: ${choices}\n"
6827 " Description: Select the default window manager.\n"
6828 " Select the window manager that will be started by\n"
6829 " default when X starts.\n"
6830 msgstr ""
6831 " Template: shared/window-manager\n"
6832 " Type: select\n"
6833 " Choices: ${choices}\n"
6834 " Description: Selectați administratorul implicit de ferestre.\n"
6835 " Selectați administratorul de ferestre care va fi pornit\n"
6836 " implicit la pornirea X.\n"
6837
6838 #. type: Plain text
6839 #: debconf-devel.7:851
6840 msgid ""
6841 "Each package should include a copy of the template. Then it should include "
6842 "some code like this in its config script:"
6843 msgstr ""
6844 "Fiecare pachet ar trebui să includă o copie a șablonului. Apoi ar trebui să "
6845 "includă un cod ca acesta în scriptul său „config”:"
6846
6847 #. type: Plain text
6848 #: debconf-devel.7:856
6849 #, no-wrap
6850 msgid ""
6851 " db_metaget shared/window-manager owners\n"
6852 " OWNERS=$RET\n"
6853 " db_metaget shared/window-manager choices\n"
6854 " CHOICES=$RET\n"
6855 msgstr ""
6856 " db_metaget shared/window-manager owners\n"
6857 " OWNERS=$RET\n"
6858 " db_metaget shared/window-manager choices\n"
6859 " CHOICES=$RET\n"
6860
6861 #. type: Plain text
6862 #: debconf-devel.7:861
6863 #, no-wrap
6864 msgid ""
6865 " if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
6866 " \tdb_subst shared/window-manager choices $OWNERS\n"
6867 " \tdb_fset shared/window-manager seen false\n"
6868 " fi\n"
6869 msgstr ""
6870 " if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
6871 " \tdb_subst shared/window-manager choices $OWNERS\n"
6872 " \tdb_fset shared/window-manager seen false\n"
6873 " fi\n"
6874
6875 #. type: Plain text
6876 #: debconf-devel.7:864
6877 #, no-wrap
6878 msgid ""
6879 " db_input medium shared/window-manager || true\n"
6880 " db_go || true\n"
6881 msgstr ""
6882 " db_input medium shared/window-manager || true\n"
6883 " db_go || true\n"
6884
6885 #. type: Plain text
6886 #: debconf-devel.7:872
6887 msgid ""
6888 "A bit of an explanation is called for. By the time your config script runs, "
6889 "debconf has already read in all the templates for the packages that are "
6890 "being installed. Since the set of packages share a question, debconf records "
6891 "that fact in the owners field. By a strange coincidence, the format of the "
6892 "owners field is the same as that of the choices field (a comma and space "
6893 "delimited list of values)."
6894 msgstr ""
6895 "Este necesară o mică explicație. În momentul în care scriptul dvs. de "
6896 "configurare rulează, debconf a citit deja toate șabloanele pentru pachetele "
6897 "care sunt instalate. Deoarece setul de pachete are o întrebare comună, "
6898 "debconf înregistrează acest fapt în câmpul „owners”. Printr-o coincidență "
6899 "ciudată, formatul câmpului owners este același cu cel al câmpului „choices” "
6900 "(o listă de valori delimitată prin virgule și spații)."
6901
6902 #. type: Plain text
6903 #: debconf-devel.7:877
6904 msgid ""
6905 "The METAGET command can be used to get the list of owners and the list of "
6906 "choices. If they are different, then a new package has been installed. So "
6907 "use the SUBST command to change the list of choices to be the same as the "
6908 "list of owners, and ask the question."
6909 msgstr ""
6910 "Comanda METAGET poate fi utilizată pentru a obține lista de proprietari și "
6911 "lista de opțiuni. Dacă acestea sunt diferite, atunci a fost instalat un "
6912 "pachet nou. Prin urmare, utilizați comanda SUBST pentru a modifica lista de "
6913 "opțiuni pentru a fi aceeași cu lista de proprietari și puneți întrebarea."
6914
6915 #. type: Plain text
6916 #: debconf-devel.7:881
6917 msgid ""
6918 "When a package is removed, you probably want to see if that package is the "
6919 "currently selected choice, and if so, prompt the user to select a different "
6920 "package to replace it."
6921 msgstr ""
6922 "Atunci când un pachet este eliminat, probabil doriți să vedeți dacă acel "
6923 "pachet este alegerea selectată în prezent și, în caz afirmativ, să "
6924 "solicitați utilizatorului să selecteze un alt pachet pentru a-l înlocui."
6925
6926 #. type: Plain text
6927 #: debconf-devel.7:885
6928 msgid ""
6929 "This can be accomplished by adding something like this to the prerm scripts "
6930 "of all related packages (replacing E<lt>packageE<gt> with the package name):"
6931 msgstr ""
6932 "Acest lucru poate fi realizat prin adăugarea unui text ca acesta în "
6933 "scripturile „prerm” ale tuturor pachetelor aferente (înlocuind "
6934 "E<lt>packageE<gt> cu numele pachetului):"
6935
6936 #. type: Plain text
6937 #: debconf-devel.7:890
6938 #, no-wrap
6939 msgid ""
6940 " if [ -e /usr/share/debconf/confmodule ]; then\n"
6941 " \t. /usr/share/debconf/confmodule\n"
6942 " \t# I no longer claim this question.\n"
6943 " \tdb_unregister shared/window-manager\n"
6944 msgstr ""
6945 " if [ -e /usr/share/debconf/confmodule ]; then\n"
6946 " \t. /usr/share/debconf/confmodule\n"
6947 " \t# Nu mai solicit această întrebare.\n"
6948 " \tdb_unregister shared/window-manager\n"
6949
6950 #. type: Plain text
6951 #: debconf-devel.7:901
6952 #, no-wrap
6953 msgid ""
6954 " \t# See if the shared question still exists.\n"
6955 " \tif db_get shared/window-manager; then\n"
6956 " \t\tdb_metaget shared/window-manager owners\n"
6957 " \t\tdb_subst shared/window-manager choices $RET\n"
6958 " \t\tdb_metaget shared/window-manager value\n"
6959 " \t\tif [ \"E<lt>packageE<gt>\" = \"$RET\" ] ; then\n"
6960 " \t\t\tdb_fset shared/window-manager seen false\n"
6961 " \t\t\tdb_input high shared/window-manager || true\n"
6962 " \t\t\tdb_go || true\n"
6963 " \t\tfi\n"
6964 msgstr ""
6965 " \t# Vedeți dacă întrebarea comună mai există.\n"
6966 " \tif db_get shared/window-manager; then\n"
6967 " \t\tdb_metaget shared/window-manager owners\n"
6968 " \t\tdb_subst shared/window-manager choices $RET\n"
6969 " \t\tdb_metaget shared/window-manager value\n"
6970 " \t\tif [ \"E<lt>packageE<gt>\" = \"$RET\" ] ; then\n"
6971 " \t\t\tdb_fset shared/window-manager seen false\n"
6972 " \t\t\tdb_input high shared/window-manager || true\n"
6973 " \t\t\tdb_go || true\n"
6974 " \t\tfi\n"
6975
6976 #. type: Plain text
6977 #: debconf-devel.7:906
6978 #, no-wrap
6979 msgid ""
6980 " \t\t# Now do whatever the postinst script did\n"
6981 " \t\t# to update the window manager symlink.\n"
6982 " \tfi\n"
6983 " fi\n"
6984 msgstr ""
6985 " \t\t# Acum faceți orice a făcut scriptul „postinst” pentru a actualiza\n"
6986 " \t\t# legătura simbolică a administratorului de ferestre.\n"
6987 " \tfi\n"
6988 " fi\n"
6989
6990 #. type: SH
6991 #: debconf-devel.7:906
6992 #, no-wrap
6993 msgid "HACKS"
6994 msgstr "TRUCURI"
6995
6996 #. type: Plain text
6997 #: debconf-devel.7:909
6998 msgid ""
6999 "Debconf is currently not fully integrated into dpkg (but I want to change "
7000 "this in the future), and so some messy hacks are currently called for."
7001 msgstr ""
7002 "Debconf nu este în prezent complet integrat în dpkg (dar vreau să schimb "
7003 "acest lucru în viitor) și, prin urmare, sunt necesare unele trucuri murdare."
7004
7005 #. type: Plain text
7006 #: debconf-devel.7:920
7007 msgid ""
7008 "The worst of these involves getting the config script to run. The way that "
7009 "works now is the config script will be run when the package is pre-"
7010 "configured. Then, when the postinst script runs, it starts up debconf again. "
7011 "Debconf notices it is being used by the postinst script, and so it goes off "
7012 "and runs the config script. This can only work if your postinst loads up one "
7013 "of the debconf libraries though, so postinsts always have to take care to do "
7014 "that. We hope to address this later by adding explicit support to dpkg for "
7015 "debconf. The B<debconf>(1) program is a step in this direction."
7016 msgstr ""
7017 "Cea mai gravă dintre acestea implică rularea scriptului „config”. Modul în "
7018 "care funcționează acum este că scriptul „config” va fi rulat atunci când "
7019 "pachetul este preconfigurat. Apoi, când se execută scriptul „postinst”, se "
7020 "pornește din nou debconf. Debconf observă că este utilizat de scriptul "
7021 "„postinst”, așa că pornește și rulează scriptul „config”. Totuși, acest "
7022 "lucru poate funcționa numai dacă scriptul dvs. „postinst” încarcă una dintre "
7023 "bibliotecile debconf, astfel încât scripturile „postinst” trebuie să aibă "
7024 "întotdeauna grijă să facă acest lucru. Sperăm să rezolvăm această problemă "
7025 "mai târziu prin adăugarea unui suport explicit pentru debconf în dpkg. "
7026 "Programul B<debconf>(1) este un pas în această direcție."
7027
7028 #. type: Plain text
7029 #: debconf-devel.7:931
7030 msgid ""
7031 "A related hack is getting debconf running when a config script, postinst, or "
7032 "other program that uses it starts up. After all, they expect to be able to "
7033 "talk to debconf right away. The way this is accomplished for now is that "
7034 "when such a script loads a debconf library (like /usr/share/debconf/"
7035 "confmodule), and debconf is not already running, it is started up, and a new "
7036 "copy of the script is re-execed. The only noticeable result is that you need "
7037 "to put the line that loads a debconf library at the very top of the script, "
7038 "or weird things will happen. We hope to address this later by changing how "
7039 "debconf is invoked, and turning it into something more like a transient "
7040 "daemon."
7041 msgstr ""
7042 "O problemă conexă este să faceți debconf să ruleze atunci când un script "
7043 "„config”, „postinst” sau alt program care îl utilizează pornește. La urma "
7044 "urmei, acestea se așteaptă să poată comunica imediat cu debconf. Modul în "
7045 "care se realizează acest lucru pentru moment este că, atunci când un astfel "
7046 "de script încarcă o bibliotecă debconf (cum ar fi „/usr/share/debconf/"
7047 "confmodule”), iar debconf nu rulează deja, acesta este pornit și o nouă "
7048 "copie a scriptului este re-executată. Singurul rezultat notabil este că "
7049 "trebuie să puneți linia care încarcă o bibliotecă debconf chiar în partea de "
7050 "sus a scriptului, altfel se vor întâmpla lucruri ciudate. Sperăm să rezolvăm "
7051 "această problemă mai târziu, schimbând modul în care debconf este invocat și "
7052 "transformându-l în ceva mai asemănător unui demon tranzitoriu."
7053
7054 #. type: Plain text
7055 #: debconf-devel.7:942
7056 msgid ""
7057 "It's rather hackish how debconf figures out what templates files to load, "
7058 "and when it loads them. When the config, preinst, and postinst scripts "
7059 "invoke debconf, it will automatically figure out where the templates file "
7060 "is, and load it. Standalone programs that use debconf will cause debconf to "
7061 "look for templates files in /usr/share/debconf/templates/"
7062 "progname.templates. And if a postrm wants to use debconf at purge time, the "
7063 "templates won't be available unless debconf had a chance to load them in its "
7064 "postinst. This is messy, but rather unavoidable. In the future some of these "
7065 "programs may be able to use debconf-loadtemplate by hand though."
7066 msgstr ""
7067 "Este destul de complicat modul în care debconf își dă seama ce fișiere de "
7068 "șabloane să încarce și când să le încarce. Atunci când scripturile „config”, "
7069 "„preinst” și „postinst” apelează debconf, acesta își va da seama automat "
7070 "unde se află fișierul de șabloane și îl va încărca. Programele autonome care "
7071 "utilizează debconf vor face ca debconf să caute fișiere de tip șablon în „/"
7072 "usr/share/debconf/templates/progname.templates”. Iar dacă un script „postrm” "
7073 "dorește să utilizeze debconf la momentul purjării, șabloanele nu vor fi "
7074 "disponibile decât dacă debconf a avut ocazia să le încarce în scriptul său "
7075 "„postinst”. Acest lucru este murdar, dar mai degrabă inevitabil. În viitor, "
7076 "unele dintre aceste programe ar putea fi capabile să utilizeze manual "
7077 "debconf-loadtemplate."
7078
7079 #. type: Plain text
7080 #: debconf-devel.7:950
7081 msgid ""
7082 "/usr/share/debconf/confmodule's historic behavior of playing with file "
7083 "descriptors and setting up a fd #3 that talks to debconf, can cause all "
7084 "sorts of trouble when a postinst runs a daemon, since the daemon ends up "
7085 "talking to debconf, and debconf can't figure out when the script terminates. "
7086 "The STOP command can work around this. In the future, we are considering "
7087 "making debconf communication happen over a socket or some other mechanism "
7088 "than stdio."
7089 msgstr ""
7090 "Comportamentul istoric al „/usr/share/debconf/confmodule” de a se juca cu "
7091 "descriptorii de fișiere și de a configura un fd #3 care comunică cu debconf, "
7092 "poate cauza tot felul de probleme atunci când un script „postinst” rulează "
7093 "un demon, deoarece demonul ajunge să comunice cu debconf, iar debconf nu își "
7094 "poate da seama când se termină scriptul. Comanda STOP poate rezolva această "
7095 "problemă. În viitor, ne gândim să facem ca comunicarea debconf să se "
7096 "realizeze prin intermediul unui soclu sau al unui alt mecanism decât "
7097 "intrarea/ieșirea standard."
7098
7099 #. type: Plain text
7100 #: debconf-devel.7:958
7101 msgid ""
7102 "Debconf sets DEBCONF_RECONFIGURE=1 before running postinst scripts, so a "
7103 "postinst script that needs to avoid some expensive operation when "
7104 "reconfigured can look at that variable. This is a hack because the right "
7105 "thing would be to pass $1 = \"reconfigure\", but doing so without breaking "
7106 "all the postinsts that use debconf is difficult. The migration plan away "
7107 "from this hack is to encourage people to write postinsts that accept "
7108 "\"reconfigure\", and once they all do, begin passing that parameter."
7109 msgstr ""
7110 "Debconf stabilește DEBCONF_RECONFIGURE=1 înainte de a rula scripturile "
7111 "„postinst”, astfel încât un script „postinst” care trebuie să evite o "
7112 "operație costisitoare atunci când este reconfigurat se poate uita la această "
7113 "variabilă. Acesta este un „truc”, deoarece lucrul corect ar fi să treceți $1 "
7114 "= „reconfigure”, dar este dificil să faceți acest lucru fără a rupe toate "
7115 "scripturile „postinst” care utilizează debconf. Planul de migrare departe de "
7116 "acest „truc” este de a încuraja oamenii să scrie scripturi „postinst” care "
7117 "acceptă „reconfigure” și, odată ce toți o fac, să înceapă să treacă acest "
7118 "parametru."
7119
7120 #. type: Plain text
7121 #: debconf-devel.7:961
7122 msgid "B<debconf>(7) is the debconf user's guide."
7123 msgstr "B<debconf>(7) este ghidul utilizatorului debconf."
7124
7125 #. type: Plain text
7126 #: debconf-devel.7:964
7127 msgid ""
7128 "The debconf specification in debian policy is the canonical definition of "
7129 "the debconf protocol. /usr/share/doc/debian-policy/"
7130 "debconf_specification.txt.gz"
7131 msgstr ""
7132 "Specificația debconf din politica debian este definiția canonică a "
7133 "protocolului debconf, și anume „/usr/share/doc/debian-policy/"
7134 "debconf_specification.txt.gz”."
7135
7136 #. type: Plain text
7137 #: debconf-devel.7:968
7138 msgid ""
7139 "B<debconf.conf>(5) has much useful information, including some info about "
7140 "the backend database."
7141 msgstr ""
7142 "B<debconf.conf>(5) conține multe informații utile, inclusiv unele informații "
7143 "despre baza de date principală."