# Romanian translation of debconf package. # Mesajele în limba română pentru manualul pachetului „debconf”. # Copyright © 2024 Free Software Foundation, Inc. # This file is distributed under the same license as the debconf package. # # Remus-Gabriel Chelu , ian-2025. # msgid "" msgstr "" "Project-Id-Version: debconf 1.5.87\n" "POT-Creation-Date: 2024-01-21 19:23+0000\n" "PO-Revision-Date: 2025-01-06 09:22+0100\n" "Last-Translator: Remus-Gabriel Chelu \n" "Language-Team: Romanian \n" "Language: ro\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Poedit 3.5\n" #. type: SH #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3 #: ../../debconf-apt-progress:3 ../../debconf-escape:3 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2 #, no-wrap msgid "NAME" msgstr "NUME" #. type: textblock #: ../../debconf:5 msgid "debconf - run a debconf-using program" msgstr "debconf - rulează un program care utilizează debconf" #. type: SH #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7 #: ../../debconf-apt-progress:7 ../../debconf-escape:7 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7 #: debconf.conf.5:12 confmodule.3:4 #, no-wrap msgid "SYNOPSIS" msgstr "SINOPSIS" #. type: verbatim #: ../../debconf:11 #, no-wrap msgid "" " debconf [options] command [args]\n" "\n" msgstr "" " debconf [opțiuni] comandă [argumente]\n" "\n" #. type: SH #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20 #: ../../debconf-apt-progress:15 ../../debconf-escape:12 #: ../../debconf-communicate:13 ../../debconf-copydb:30 #: ../../debconf-getlang:21 ../../debconf-get-selections:11 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21 #: ../../debconf-set-selections:12 ../../debconf-show:13 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4 #, no-wrap msgid "DESCRIPTION" msgstr "DESCRIERE" #. type: textblock #: ../../debconf:15 msgid "" "Debconf is a configuration system for Debian packages. For a debconf " "overview and documentation for sysadmins, see L (in the debconf-" "doc package)." msgstr "" "Debconf este un sistem de configurare pentru pachetele Debian. Pentru o " "prezentare generală a debconf și documentație pentru administratorii de " "sistem, consultați L (în pachetul debconf-doc)." #. type: textblock #: ../../debconf:19 msgid "" "The B program runs a program under debconf's control, setting it up " "to talk with debconf on stdio. The program's output is expected to be " "debconf protocol commands, and it is expected to read result codes on stdin. " "See L for details about the debconf protocol." msgstr "" "Programul B rulează un program sub controlul debconf, configurându-" "l pentru a comunica cu debconf prin intermediul intrării standard. Se " "așteaptă ca ieșirea programului să fie comenzile protocolului debconf și se " "așteaptă ca acesta să citească codurile de rezultate la intrarea standard. " "Consultați L pentru detalii despre protocolul debconf." #. type: textblock #: ../../debconf:24 msgid "" "The command to be run under debconf must be specified in a way that will let " "your PATH find it." msgstr "" "Comanda care urmează să fie executată sub debconf trebuie specificată într-" "un mod care va permite variabilei de mediu $PATH să o găsească." #. type: textblock #: ../../debconf:27 msgid "" "This command is not the usual way that debconf is used. It's more typical " "for debconf to be used via L or L." msgstr "" "Această comandă nu este modul obișnuit în care este utilizat debconf. Este " "mai tipic ca debconf să fie utilizat prin L sau L." #. type: =head1 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21 msgid "OPTIONS" msgstr "OPȚIUNI" #. type: =item #: ../../debconf:34 msgid "B<-o>I, B<--owner=>I" msgstr "B<-o>I, B<--owner=>I" #. type: textblock #: ../../debconf:36 msgid "" "Tell debconf what package the command it is running is a part of. This is " "necessary to get ownership of registered questions right, and to support " "unregister and purge commands properly." msgstr "" "Îi indică lui debconf din ce pachet face parte comanda pe care o execută. " "Acest lucru este necesar pentru a obține proprietarul corect al întrebărilor " "înregistrate și pentru a gestiona corect comenzile de ștergere a " "înregistrărilor «unregister» și de purjare «purge»." #. type: =item #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25 msgid "B<-f>I, B<--frontend=>I" msgstr "B<-f>I, B<--frontend=>I" #. type: textblock #: ../../debconf:42 ../../dpkg-preconfigure:26 msgid "Select the frontend to use." msgstr "Selectează interfața care urmează să fie utilizată." #. type: =item #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36 msgid "B<-p>I, B<--priority=>I" msgstr "B<-p>I, B<--priority=>I" #. type: textblock #: ../../debconf:46 msgid "Specify the minimum priority of question that will be displayed." msgstr "Specifică prioritatea minimă a întrebării care va fi afișată." #. type: =item #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42 msgid "B<--terse>" msgstr "B<--terse>" #. type: textblock #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44 msgid "Enables terse output mode. This affects only some frontends." msgstr "" "Activează modul de ieșire laconic. Acest lucru afectează doar unele " "interfețe." #. type: =head1 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75 #: ../../debconf-set-selections:47 msgid "EXAMPLES" msgstr "EXEMPLE" #. type: textblock #: ../../debconf:56 msgid "To debug a shell script that uses debconf, you might use:" msgstr "" "Pentru depanarea unui script shell care utilizează debconf, puteți utiliza:" #. type: verbatim #: ../../debconf:58 #, no-wrap msgid "" " DEBCONF_DEBUG=developer debconf my-shell-prog\n" "\n" msgstr "" " DEBCONF_DEBUG=developer debconf scriptul-meu-shell\n" "\n" #. type: textblock #: ../../debconf:60 msgid "Or, you might use this:" msgstr "Sau, puteți utiliza această comandă:" #. type: verbatim #: ../../debconf:62 #, no-wrap msgid "" " debconf --frontend=readline sh -x my-shell-prog\n" "\n" msgstr "" " debconf --frontend=readline sh -x scriptul-meu-shell\n" "\n" #. type: SH #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154 #: ../../debconf-escape:21 ../../debconf-communicate:39 #: ../../debconf-copydb:102 ../../debconf-getlang:74 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376 #: debconf-devel.7:958 #, no-wrap msgid "SEE ALSO" msgstr "CONSULTAȚI ȘI" #. type: textblock #: ../../debconf:66 msgid "L, L" msgstr "L, L" #. type: SH #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159 #: ../../debconf-escape:72 ../../debconf-communicate:74 #: ../../debconf-copydb:175 ../../debconf-getlang:256 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226 #: ../../debconf-show:152 ../../dpkg-preconfigure:258 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382 #: debconf-devel.7:968 #, no-wrap msgid "AUTHOR" msgstr "AUTOR" #. type: textblock #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76 #: ../../debconf-copydb:177 ../../debconf-getlang:258 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311 msgid "Joey Hess " msgstr "Joey Hess " #. type: textblock #: ../../Debconf/Client/ConfModule.pm:5 msgid "Debconf::Client::ConfModule - client module for ConfModules" msgstr "Debconf::Client::ConfModule - modul client pentru ConfModules" #. type: verbatim #: ../../Debconf/Client/ConfModule.pm:9 #, no-wrap msgid "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Back button pressed.\n" " \t...\n" " }\n" " ...\n" "\n" msgstr "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Butonul «Înapoi» apăsat.\n" " \t...\n" " }\n" " ...\n" "\n" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:22 msgid "" "This is a module to ease writing ConfModules for Debian's configuration " "management system. It can communicate with a FrontEnd via the debconf " "protocol (which is documented in full in the debconf_specification in Debian " "policy)." msgstr "" "Acesta este un modul pentru a ușura scrierea de ConfModules pentru sistemul " "de gestionare a configurației Debian. Poate comunica cu o interfață " "(FrontEnd) prin protocolul debconf (care este documentat în întregime în " "debconf_specification din politica Debian)." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:27 msgid "" "The design is that each command in the protocol is represented by one " "function in this module (with the name lower-cased). Call the function and " "pass in any parameters you want to follow the command. If the function is " "called in scalar context, it will return any textual return code. If it is " "called in list context, an array consisting of the numeric return code and " "the textual return code will be returned." msgstr "" "Fiecare comandă din protocol este reprezentată de o funcție în acest modul " "(cu numele scris cu litere mici). Apelați funcția și treceți orice parametri " "doriți să urmeze comanda. Dacă funcția este apelată în context scalar, " "aceasta va returna orice cod de returnare textual. Dacă este apelată în " "context de listă, va fi returnată o matrice formată din codul de returnare " "numeric și codul de returnare textual." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:34 msgid "" "This module uses Exporter to export all functions it defines. To import " "everything, simply import \":all\"." msgstr "" "Acest modul utilizează Exporter pentru a exporta toate funcțiile pe care le " "definește. Pentru a importa totul, importați pur și simplu „:all”." #. type: =item #: ../../Debconf/Client/ConfModule.pm:62 msgid "import" msgstr "import" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:64 msgid "" "Ensure that a FrontEnd is running. It's a little hackish. If " "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, " "one is started up automatically and stdin and out are connected to it. Note " "that this function is always run when the module is loaded in the usual way." msgstr "" "Se asigură că o interfață (FrontEnd) rulează. Este un pic mai complicat. " "Dacă variabila DEBIAN_HAS_FRONTEND este definită, se presupune că o " "interfață rulează. Dacă nu, una este pornită automat și intrarea și ieșirea " "standard sunt conectate la aceasta. Rețineți că această funcție este " "întotdeauna executată atunci când modulul este încărcat în mod obișnuit." #. type: =item #: ../../Debconf/Client/ConfModule.pm:95 msgid "stop" msgstr "stop" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:97 msgid "" "The frontend doesn't send a return code here, so we cannot try to read it or " "we'll block." msgstr "" "Interfața nu trimite un cod de returnare aici, deci nu putem încerca să îl " "citim sau ne vom bloca." #. type: =item #: ../../Debconf/Client/ConfModule.pm:107 msgid "AUTOLOAD" msgstr "AUTOLOAD" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:109 msgid "Creates handler functions for commands on the fly." msgstr "Creează din mers funcții de gestionare pentru comenzi." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:156 msgid "" "The debconf specification (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." msgstr "" "Specificația debconf (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." #. type: textblock #: ../../debconf-apt-progress:5 msgid "" "debconf-apt-progress - install packages using debconf to display a progress " "bar" msgstr "" "debconf-apt-progress - instalează pachete folosind debconf pentru a afișa o " "bară de progres" #. type: verbatim #: ../../debconf-apt-progress:9 #, no-wrap msgid "" " debconf-apt-progress [--] command [args ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n" " debconf-apt-progress --stop\n" "\n" msgstr "" " debconf-apt-progress [--] comanda [argumente ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] comanda [argumente ...]\n" " debconf-apt-progress --stop\n" "\n" #. type: textblock #: ../../debconf-apt-progress:17 msgid "" "B installs packages using debconf to display a " "progress bar. The given I should be any command-line apt frontend; " "specifically, it must send progress information to the file descriptor " "selected by the C configuration option, and must keep the " "file descriptors nominated by the C configuration option open " "when invoking debconf (directly or indirectly), as those file descriptors " "will be used for the debconf passthrough protocol." msgstr "" "B instalează pachete utilizând debconf pentru a afișa " "o bară de progres. I dată ar trebui să fie orice interfață apt din " "linia de comandă; în special, trebuie să trimită informații despre progres " "către descriptorul de fișier selectat de opțiunea de configurare " "C și trebuie să mențină deschise descriptoarele de fișier " "nominalizate de opțiunea de configurare C atunci când se " "apelează debconf (direct sau indirect), deoarece acele descriptoare de " "fișier vor fi utilizate pentru protocolul „passthrough” (de trecere la) " "debconf." #. type: textblock #: ../../debconf-apt-progress:25 msgid "" "The arguments to the command you supply should generally include B<-y> (for " "B or B) or similar to avoid the apt frontend prompting " "for input. B cannot do this itself because the " "appropriate argument may differ between apt frontends." msgstr "" "Argumentele comenzii pe care o furnizați ar trebui să includă, în general, " "B<-y> (pentru B sau B) sau ceva similar pentru a evita ca " "interfața apt să solicite informații. B nu poate face " "acest lucru deoarece argumentul adecvat poate diferi de la o interfață apt " "la alta." #. type: textblock #: ../../debconf-apt-progress:30 msgid "" "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to " "create a progress bar with multiple segments for different stages of " "installation, provided that the caller is a debconf confmodule. The caller " "may also interact with the progress bar itself using the debconf protocol if " "it so desires." msgstr "" "Opțiunile B<--start>, B<--stop>, B<--from> și B<--to> pot fi utilizate " "pentru a crea o bară de progres cu mai multe segmente pentru diferite etape " "de instalare, cu condiția ca apelantul să fie un modul de configurare " "„confmodule” debconf. Apelantul poate, de asemenea, să interacționeze cu " "bara de progres în sine utilizând protocolul debconf, dacă dorește acest " "lucru." #. type: textblock #: ../../debconf-apt-progress:36 msgid "" "debconf locks its config database when it starts up, which makes it " "unfortunately inconvenient to have one instance of debconf displaying the " "progress bar and another passing through questions from packages being " "installed. If you're using a multiple-segment progress bar, you'll need to " "eval the output of the B<--config> option before starting the debconf " "frontend to work around this. See L below." msgstr "" "debconf își blochează baza de date de configurare atunci când pornește, ceea " "ce face ca, din păcate, să nu fie convenabil ca o instanță a debconf să " "afișeze bara de progres și o alta să transmită întrebări de la pachetele în " "curs de instalare. Dacă utilizați o bară de progres cu mai multe segmente, " "va trebui să evaluați rezultatul opțiunii B<--config> înainte de a porni " "interfața debconf pentru a rezolva această problemă. Consultați L de mai jos." #. type: =item #: ../../debconf-apt-progress:47 msgid "B<--config>" msgstr "B<--config>" #. type: textblock #: ../../debconf-apt-progress:49 msgid "" "Print environment variables necessary to start up a progress bar frontend." msgstr "" "Afișează variabilele de mediu necesare pentru a porni o interfață cu bara de " "progres." #. type: =item #: ../../debconf-apt-progress:51 msgid "B<--start>" msgstr "B<--start>" #. type: textblock #: ../../debconf-apt-progress:53 msgid "" "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and " "B<--to> to use other endpoints." msgstr "" "Pornește o bară de progres, care rulează implicit de la 0 la 100. Utilizați " "B<--from> și B<--to> pentru a utiliza alte puncte finale." #. type: =item #: ../../debconf-apt-progress:56 msgid "B<--from> I" msgstr "B<--from> I" #. type: textblock #: ../../debconf-apt-progress:58 msgid "" "If used with B<--start>, make the progress bar begin at I rather " "than 0." msgstr "" "Dacă este utilizată cu B<--start>, bara de progres începe la I în loc de 0." #. type: textblock #: ../../debconf-apt-progress:61 msgid "" "Otherwise, install packages with their progress bar beginning at this " "\"waypoint\". Must be used with B<--to>." msgstr "" "În caz contrar, instalează pachetele cu bara lor de progres începând de la " "acest „punct de reper”. Trebuie să fie utilizată cu B<--to>." #. type: =item #: ../../debconf-apt-progress:64 msgid "B<--to> I" msgstr "B<--to> I" #. type: textblock #: ../../debconf-apt-progress:66 msgid "" "If used with B<--start>, make the progress bar end at I rather " "than 100." msgstr "" "Dacă este utilizată cu B<--start>, bara de progres se termină la I în loc de 100." #. type: textblock #: ../../debconf-apt-progress:69 msgid "" "Otherwise, install packages with their progress bar ending at this " "\"waypoint\". Must be used with B<--from>." msgstr "" "În caz contrar, instalează pachetele a căror bară de progres se termină la " "acest „punct-de-reper”. Trebuie să fie utilizată împreună cu B<--from>." #. type: =item #: ../../debconf-apt-progress:72 msgid "B<--stop>" msgstr "B<--stop>" #. type: textblock #: ../../debconf-apt-progress:74 msgid "Stop a running progress bar." msgstr "Oprește o bară de progres care rulează." #. type: =item #: ../../debconf-apt-progress:76 msgid "B<--no-progress>" msgstr "B<--no-progress>" #. type: textblock #: ../../debconf-apt-progress:78 msgid "" "Avoid starting, stopping, or stepping the progress bar. Progress messages " "from apt, media change events, and debconf questions will still be passed " "through to debconf." msgstr "" "Evită pornirea, oprirea sau parcurgerea pas cu pas a barei de progres. " "Mesajele de progres de la apt, evenimentele de schimbare a suportului media " "și întrebările debconf vor fi transmise în continuare către debconf." #. type: =item #: ../../debconf-apt-progress:82 msgid "B<--dlwaypoint> I" msgstr "B<--dlwaypoint> I" #. type: textblock #: ../../debconf-apt-progress:84 msgid "" "Specify what percent of the progress bar to use for downloading packages. " "The remainder will be used for installing packages. The default is to use " "15% for downloading and the remaining 85% for installing." msgstr "" "Specifică ce procent din bara de progres să fie utilizat pentru descărcarea " "pachetelor. Restul va fi utilizat pentru instalarea pachetelor. Valoarea " "implicită este de a utiliza 15% pentru descărcare și restul de 85% pentru " "instalare." #. type: =item #: ../../debconf-apt-progress:88 msgid "B<--logfile> I" msgstr "B<--logfile > I" #. type: textblock #: ../../debconf-apt-progress:90 msgid "Send the normal output from apt to the given file." msgstr "Trimite ieșirea normală de la apt către fișierul dat." #. type: =item #: ../../debconf-apt-progress:92 msgid "B<--logstderr>" msgstr "B<--logstderr>" #. type: textblock #: ../../debconf-apt-progress:94 msgid "" "Send the normal output from apt to stderr. If you supply neither B<--" "logfile> nor B<--logstderr>, the normal output from apt will be discarded." msgstr "" "Trimite ieșirea normală de la apt la ieșirea de eroare standard. Dacă nu " "furnizați nici B<--logfile>, nici B<--logstderr>, ieșirea normală de la apt " "va fi eliminată." #. type: =item #: ../../debconf-apt-progress:98 msgid "B<-->" msgstr "B<-->" #. type: textblock #: ../../debconf-apt-progress:100 msgid "" "Terminate options. Since you will normally need to give at least the B<-y> " "argument to the command being run, you will usually need to use B<--> to " "prevent that being interpreted as an option to B " "itself." msgstr "" "Semnalează terminarea opțiunilor. Deoarece în mod normal va trebui să " "oferiți cel puțin argumentul B<-y> comenzii care se execută, de obicei va " "trebui să utilizați B<--> pentru a preveni interpretarea acestuia ca opțiune " "pentru B." #. type: textblock #: ../../debconf-apt-progress:109 msgid "" "Install the GNOME desktop and an X window system development environment " "within a progress bar:" msgstr "" "Instalați biroul GNOME și un mediu de dezvoltare cu sistemul de ferestre X " "în cadrul unei bare de progres:" #. type: verbatim #: ../../debconf-apt-progress:112 #, no-wrap msgid "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" msgstr "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" #. type: textblock #: ../../debconf-apt-progress:114 msgid "" "Install the GNOME, KDE, and XFCE desktops within a single progress bar, " "allocating 45% of the progress bar for each of GNOME and KDE and the " "remaining 10% for XFCE:" msgstr "" "Instalați birourile GNOME, KDE și XFCE în cadrul unei singure bare de " "progres, alocând 45% din bara de progres pentru GNOME, alte 45% pentru KDE " "și restul de 10% pentru XFCE:" #. type: verbatim #: ../../debconf-apt-progress:118 #, no-wrap msgid "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" msgstr "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" #. type: =head1 #: ../../debconf-apt-progress:135 msgid "RETURN CODE" msgstr "COD DE RETURNARE" #. type: textblock #: ../../debconf-apt-progress:137 msgid "" "The exit code of the specified command is returned, unless the user hit the " "cancel button on the progress bar. If the cancel button was hit, a value of " "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 " "will be returned." msgstr "" "Este returnat codul de ieșire al comenzii specificate, cu excepția cazului " "în care utilizatorul a apăsat butonul de anulare de la bara de progres. Dacă " "butonul de anulare a fost apăsat, se returnează o valoare de 30. Pentru a " "evita ambiguitatea, dacă comanda a returnat 30, se va returna o valoare de 3." #. type: =head1 #: ../../debconf-apt-progress:654 msgid "AUTHORS" msgstr "AUTORI" #. type: textblock #: ../../debconf-apt-progress:656 ../../debconf-escape:74 msgid "Colin Watson " msgstr "Colin Watson " #. type: textblock #: ../../debconf-escape:5 msgid "debconf-escape - helper when working with debconf's escape capability" msgstr "debconf-escape - ajutor în lucrul cu capacitatea de eludare a debconf" #. type: verbatim #: ../../debconf-escape:9 #, no-wrap msgid "" " debconf-escape -e < unescaped-text\n" " debconf-escape -u < escaped-text\n" "\n" msgstr "" " debconf-escape -e < text-neeludat\n" " debconf-escape -u < text-eludat\n" "\n" #. type: textblock #: ../../debconf-escape:14 msgid "" "When debconf has the 'escape' capability set, it will expect commands you " "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> " "respectively) and will in turn escape backslashes and newlines in its " "replies. This can be used, for example, to substitute multi-line strings " "into templates, or to get multi-line extended descriptions reliably using " "C." msgstr "" "Când debconf are activată funcția „escape” (eludare), se va aștepta ca acele " "comenzi pe care i le trimiteți să aibă bare oblice și linii noi eludate (ca " "C<\\\\> și respectiv C<\\n>) și, la rândul său, va eluda barele oblice și " "liniile noi în răspunsurile sale. Acest lucru poate fi utilizat, de exemplu, " "pentru a înlocui șiruri cu mai multe linii în șabloane sau pentru a obține " "descrieri extinse cu mai multe linii în mod fiabil utilizând C." #. type: textblock #: ../../debconf-escape:23 msgid "L (available in the debconf-doc package)" msgstr "L (disponibil în pachetul „debconf-doc”)" #. type: textblock #: ../../debconf-communicate:5 msgid "debconf-communicate - communicate with debconf" msgstr "debconf-communicate - comunicare cu debconf" #. type: verbatim #: ../../debconf-communicate:11 #, no-wrap msgid "" " echo commands | debconf-communicate [options] [package]\n" "\n" msgstr "" " echo comenzi | debconf-communicate [opțiuni] [pachet]\n" "\n" #. type: textblock #: ../../debconf-communicate:15 msgid "" "B allows you to communicate with debconf on the fly, " "from the command line. The package argument is the name of the package which " "you are pretending to be as you communicate with debconf, and it may be " "omitted if you are lazy. It reads commands in the form used by the debconf " "protocol from stdin. For documentation on the available commands and their " "usage, see the debconf specification." msgstr "" "B vă permite să comunicați cu debconf din mers, din " "linia de comandă. Argumentul „pachet” este numele pachetului în care " "pretindeți că sunteți în timp ce comunicați cu debconf și poate fi omis dacă " "sunteți leneș. Acesta citește comenzile în forma utilizată de protocolul " "debconf de la intrarea standard. Pentru documentație privind comenzile " "disponibile și utilizarea lor, consultați specificațiile debconf." #. type: textblock #: ../../debconf-communicate:22 msgid "" "The commands are executed in sequence. The textual return code of each is " "printed out to standard output." msgstr "" "Comenzile sunt executate în succesiune. Codul de returnare textual al " "fiecăreia este imprimat la ieșirea standard." #. type: textblock #: ../../debconf-communicate:25 msgid "" "The return value of this program is the numeric return code of the last " "executed command." msgstr "" "Valoarea de returnare a acestui program este codul numeric de returnare al " "ultimei comenzi executate." #. type: SH #: ../../debconf-communicate:28 debconf.conf.5:444 #, no-wrap msgid "EXAMPLE" msgstr "EXEMPLU" #. type: verbatim #: ../../debconf-communicate:30 #, no-wrap msgid "" " echo get debconf/frontend | debconf-communicate\n" "\n" msgstr "" " echo get debconf/frontend | debconf-communicate\n" "\n" #. type: textblock #: ../../debconf-communicate:32 msgid "Print out the value of the debconf/frontend question." msgstr "Afișează valoarea întrebării din interfața-debconf (debconf/fronted)." #. type: =head1 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25 #: ../../debconf-set-selections:20 msgid "WARNING" msgstr "AVERTISMENT" #. type: textblock #: ../../debconf-communicate:36 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging." msgstr "" "Acest program nu ar trebui să fie utilizat niciodată dintr-un script de " "menținere a unui pachet care utilizează debconf! Cu toate acestea, poate fi " "util în depanare." #. type: textblock #: ../../debconf-communicate:41 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-copydb:5 msgid "debconf-copydb - copy a debconf database" msgstr "debconf-copydb - copiază o bază de date debconf" #. type: verbatim #: ../../debconf-copydb:19 #, no-wrap msgid "" " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n" "\n" msgstr "" " debconf-copydb BD-sursă BD-destinație [--pattern=model] [--owner-pattern=model] [--config=Foo:bar]\n" "\n" #. type: textblock #: ../../debconf-copydb:32 msgid "" "B copies items from an existing debconf database into " "another, possibly new database. The two databases may have different " "formats; if so a conversion will automatically be done." msgstr "" "B copiază elemente dintr-o bază de date debconf existentă " "într-o altă bază de date, posibil nouă. Cele două baze de date pot avea " "formate diferite; în acest caz, se va face automat o conversie." #. type: =item #: ../../debconf-copydb:40 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:42 msgid "" "The name of the source database. Typically it will be defined in your " "debconf.conf (or .debconfrc) file." msgstr "" "Numele bazei de date sursă. De obicei, acesta va fi definit în fișierul " "debconf.conf (sau .debconfrc)." #. type: =item #: ../../debconf-copydb:45 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:47 msgid "" "The name of the destination database. It may be defined in debconf.conf " "or .debconfrc, or you might define it on the command line (see below)." msgstr "" "Numele bazei de date de destinație. Acesta poate fi definit în debconf.conf " "sau .debconfrc, sau îl puteți defini în linia de comandă (a se vedea mai " "jos)." #. type: =item #: ../../debconf-copydb:51 msgid "B<-p> I, B<--pattern> I" msgstr "B<-p> I, B<--pattern> I" #. type: textblock #: ../../debconf-copydb:53 msgid "" "If this is specified, only items in I whose names match the " "pattern will be copied." msgstr "" "Dacă acesta este specificat, vor fi copiate numai elementele din I " "ale căror nume corespund modelului." #. type: =item #: ../../debconf-copydb:56 msgid "B<--owner-pattern> I" msgstr "B<--owner-pattern> I" #. type: textblock #: ../../debconf-copydb:58 msgid "" "If this is specified, only items in I whose owners match the " "pattern will be copied." msgstr "" "Dacă acesta este specificat, vor fi copiate numai elementele din I " "ai căror proprietari corespund modelului." #. type: =item #: ../../debconf-copydb:61 msgid "B<-c> I, B<--config> I" msgstr "B<-c> I, B<--config> I" #. type: textblock #: ../../debconf-copydb:63 msgid "Set option Foo to bar. This is similar to writing:" msgstr "" "Stabilește opțiunea „Foo” la „bar”. Acest lucru este similar cu scrierea:" #. type: verbatim #: ../../debconf-copydb:65 #, no-wrap msgid "" " Foo: bar\n" "\n" msgstr "" " Foo: bar\n" "\n" #. type: textblock #: ../../debconf-copydb:67 msgid "" "In debconf.conf, except you probably want to leave off the space on the " "command line (or quote it: \"Foo: bar\"). Generally must be used multiple " "times, to build up a full configuration stanza. While blank lines are used " "to separate stanzas in debconf.conf, this program will assume that " "\"Name:dbname\" denotes the beginning of a new stanza." msgstr "" "În debconf.conf, cu excepția faptului că probabil doriți să omiteți spațiul " "din linia de comandă (sau să-l puneți între ghilimele duble: \"Foo: bar\"). " "În general, trebuie utilizată de mai multe ori, pentru a construi o strofă " "de configurare completă. În timp ce liniile goale sunt utilizate pentru a " "separa strofele în debconf.conf, acest program va presupune că „Name:numeBD” " "reprezintă începutul unei noi strofe." #. type: verbatim #: ../../debconf-copydb:77 #, no-wrap msgid "" " debconf-copydb configdb backup\n" "\n" msgstr "" " debconf-copydb configdb copie_de_rezervă-BD\n" "\n" #. type: textblock #: ../../debconf-copydb:79 msgid "" "Copy all of configdb to backup, assuming you already have the backup " "database defined in debconf.conf." msgstr "" "Copiază toată baza de date „configdb” în copie_de_rezervă-BD, presupunând că " "aveți deja baza de date de copie_de_rezervă-BD definită în debconf.conf." #. type: verbatim #: ../../debconf-copydb:82 #, no-wrap msgid "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" msgstr "" " debconf-copydb configdb BD-nouă --pattern='^slrn/' \\\n" " \t--config=Name:BD-nouă --config=Driver:File \\\n" "\t--config=Filename:BD-nouă.dat\n" "\n" #. type: textblock #: ../../debconf-copydb:86 msgid "" "Copy slrn's data out of configdb, and into newdb. newdb is not defined in " "the rc file, so the --config switches set up the database on the fly." msgstr "" "Copiază datele slrn din baza de date „configdb” în BD-nouă. BD-nouă nu este " "definită în fișierul rc, astfel încât opțiunea „--config” stabilește baza de " "date din mers." #. type: verbatim #: ../../debconf-copydb:89 #, no-wrap msgid "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" msgstr "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" #. type: textblock #: ../../debconf-copydb:92 msgid "Spit out all the items in the debconf database related to package foo." msgstr "" "Scoate toate elementele din baza de date debconf referitoare la pachetul foo." #. type: verbatim #: ../../debconf-copydb:94 #, no-wrap msgid "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" msgstr "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh gazdă_la_distanță debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" #. type: textblock #: ../../debconf-copydb:99 msgid "" "This uses the special purpose pipe driver to copy a database to a remote " "system." msgstr "" "Aceasta utilizează sistemul de control (driver) special pentru acest scop, " "„pipe”, pentru a copia o bază de date pe un sistem la distanță." #. type: textblock #: ../../debconf-copydb:104 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-getlang:5 msgid "debconf-getlang - extract a language from a templates file" msgstr "debconf-getlang - extrage o limbă dintr-un fișier șablon" #. type: verbatim #: ../../debconf-getlang:18 #, no-wrap msgid "" " debconf-getlang lang master [translation]\n" " debconf-getlang --stats master translation [...]\n" "\n" msgstr "" " debconf-getlang limba fișier-principal [traducerea]\n" " debconf-getlang --stats fișier-principal traducerea [...]\n" "\n" #. type: textblock #: ../../debconf-getlang:23 msgid "" "Note: This utility is deprecated; you should switch to using the po-debconf " "package." msgstr "" "Notă: Acest instrument este depreciat; ar trebui să treceți la utilizarea " "pachetului po-debconf." #. type: textblock #: ../../debconf-getlang:25 msgid "" "This program helps make and manage translations of debconf templates. There " "are basically three situations in which this program might be called:" msgstr "" "Acest program ajută la realizarea și gestionarea traducerilor șabloanelor " "debconf. Există în principiu trei situații în care acest program ar putea fi " "apelat:" #. type: =item #: ../../debconf-getlang:30 msgid "A translation is just being started." msgstr "O traducere tocmai a fost începută." #. type: textblock #: ../../debconf-getlang:32 msgid "" "You want to provide the translator with a file they can work on that has the " "English fields from your templates file, plus blank Field-ll fields for the " "target language that they can fill in." msgstr "" "Doriți să furnizați traducătorului un fișier pe care să poată lucra și care " "conține câmpurile în limba engleză (msgid) din fișierul dvs. de șabloane, " "plus câmpuri secundare (msgstr) goale pentru limba țintă pe care le poate " "completa." #. type: textblock #: ../../debconf-getlang:36 msgid "" "To do this, run the program with first parameter being the code for the " "language that is being translated to, and the second parameter being the " "filename of the English templates file." msgstr "" "Pentru a face acest lucru, rulați programul cu primul parametru fiind codul " "pentru limba în care este tradus, iar al doilea parametru fiind numele " "fișierului de șabloane în limba engleză." #. type: =item #: ../../debconf-getlang:40 msgid "A translation is well under way." msgstr "O traducere este în plină desfășurare." #. type: textblock #: ../../debconf-getlang:42 msgid "" "You have changed some English text, or added more items to your templates " "file, and you want to send the translators a file with the English text plus " "their current translations (or you are the translator, and you want to " "generate such a file for your own use)." msgstr "" "Ați modificat o parte din textul în limba engleză sau ați adăugat mai multe " "elemente la fișierul dvs. de șabloane și doriți să trimiteți traducătorilor " "un fișier cu textul în limba engleză plus traducerile lor actuale (sau " "sunteți traducătorul și doriți să generați un astfel de fișier pentru uz " "propriu)." #. type: textblock #: ../../debconf-getlang:47 msgid "" "To accomplish this, run the program with the first parameter being the the " "code for the language that is being translated to, the second parameter " "being the filename of the master English templates file, and the third " "parameter being the filename of the current translated file." msgstr "" "Pentru a realiza acest lucru, rulați programul cu primul parametru fiind " "codul pentru limba în care este tradus, al doilea parametru fiind numele " "fișierului principal al șabloanelor în limba engleză, iar al treilea " "parametru fiind numele fișierului tradus curent." #. type: textblock #: ../../debconf-getlang:52 msgid "" "When run this way, the program is smart enough to notice fuzzy translations. " "For example a fuzzy Description will be output as Description--fuzzy, " "and a new, blank Description- will be added. Translators should " "remove the -fuzzy fields as they correct the fuzzy translations." msgstr "" "Atunci când este rulat în acest mod, programul este suficient de inteligent " "pentru a observa traducerile aproximative „fuzzy”. De exemplu, o descriere " "neclară va fi transmisă ca „Description--fuzzy” și va fi adăugată o " "descriere nouă, goală, „Description-”. Traducătorii trebuie să " "elimine câmpurile -fuzzy pe măsură ce corectează traducerile aproximative." #. type: =item #: ../../debconf-getlang:58 msgid "Checking the status of a translation" msgstr "Verificarea stării unei traduceri" #. type: textblock #: ../../debconf-getlang:60 msgid "" "To check the status of a translation, use the --status flag, and pass the " "english template file as the first parameter, and all the other translated " "templates after that. It will output statistics for each of them. For " "example:" msgstr "" "Pentru a verifica starea unei traduceri, utilizați opțiunea „--status” și " "treceți fișierul șablon în limba engleză ca prim parametru, iar apoi toate " "celelalte șabloane traduse. Se vor afișa statistici pentru fiecare dintre " "ele. De exemplu:" #. type: verbatim #: ../../debconf-getlang:65 #, no-wrap msgid "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" msgstr "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" #. type: =head1 #: ../../debconf-getlang:69 msgid "NOTE" msgstr "NOTĂ" #. type: textblock #: ../../debconf-getlang:71 msgid "" "Note that the text in the generated templates may be word-wrapped by debconf." msgstr "" "Rețineți că textul din șabloanele generate poate fi „word wrapped” (încadrat " "în pagină) de către debconf." #. type: textblock #: ../../debconf-getlang:76 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-get-selections:5 msgid "debconf-get-selections - output contents of debconf database" msgstr "debconf-get-selections - afișează conținutul bazei de date debconf" #. type: textblock #: ../../debconf-get-selections:9 msgid "debconf-get-selections [--installer]" msgstr "debconf-get-selections [--installer]" #. type: textblock #: ../../debconf-get-selections:13 msgid "" "Output the current debconf database in a format understandable by debconf-" "set-selections." msgstr "" "Afișează baza de date debconf curentă într-un format înțeles de «debconf-set-" "selections»." #. type: textblock #: ../../debconf-get-selections:16 msgid "" "To dump the debconf database of the debian-installer, from /var/log/" "installer/cdebconf, use the --installer parameter." msgstr "" "Pentru a extrage baza de date „debconf” a «debian-installer», din „/var/log/" "installer/cdebconf”, utilizați opțiunea „--installer”." #. type: textblock #: ../../debconf-get-selections:80 ../../debconf-set-selections:228 msgid "Petter Reinholdtsen " msgstr "Petter Reinholdtsen " #. type: textblock #: ../../debconf-loadtemplate:5 msgid "debconf-loadtemplate - load template file into debconf database" msgstr "debconf-loadtemplate - încarcă fișierul șablon în baza de date debconf" #. type: verbatim #: ../../debconf-loadtemplate:16 #, no-wrap msgid "" " debconf-loadtemplate owner file [file ..]\n" "\n" msgstr "" " debconf-loadtemplate proprietar fișier [fișier ..]\n" "\n" #. type: textblock #: ../../debconf-loadtemplate:20 msgid "" "Loads one or more template files into the debconf database. The first " "parameter specifies the owner of the templates (typically, the owner is the " "name of a debian package). The remaining parameters are template files to " "load." msgstr "" "Încarcă unul sau mai multe fișiere șablon în baza de date debconf. Primul " "parametru specifică proprietarul șabloanelor (de obicei, proprietarul este " "numele unui pachet debian). Parametrii rămași sunt fișierele șablon care " "urmează să fie încărcate." #. type: textblock #: ../../debconf-loadtemplate:27 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging, or to seed the debconf " "database." msgstr "" "Acest program nu ar trebui să fie utilizat niciodată de un script de " "întreținere a unui pachet care utilizează debconf! Cu toate acestea, poate " "fi util în depanare sau pentru alimentarea bazei de date debconf." #. type: textblock #: ../../debconf-loadtemplate:33 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-mergetemplate:5 msgid "debconf-mergetemplate - merge together multiple debconf template files" msgstr "debconf-mergetemplate - îmbină mai multe fișiere șablon debconf" # R-GC, scrie # - traducerea inițială: # „ debconf-mergetemplate [opțiuni] [șabloane.ll ...] șabloane” #. type: verbatim #: ../../debconf-mergetemplate:19 #, no-wrap msgid "" " debconf-mergetemplate [options] [templates.ll ...] templates\n" "\n" msgstr "" " debconf-mergetemplate [opțiuni] [templates.ll ...] templates\n" "\n" #. type: textblock #: ../../debconf-mergetemplate:23 msgid "" "Note: This utility is deprecated. You should switch to using po-debconf's " "po2debconf program." msgstr "" "Notă: Acest instrument este depreciat. Ar trebui să treceți la utilizarea " "programului po2debconf al po-debconf." #. type: textblock #: ../../debconf-mergetemplate:26 msgid "" "This program is useful if you have multiple debconf templates files which " "you want to merge together into one big file. All the specified files will " "be read in, merged, and output to standard output." msgstr "" "Acest program este util dacă aveți mai multe fișiere de șabloane debconf pe " "care doriți să le îmbinați într-un singur fișier mare. Toate fișierele " "specificate vor fi citite, fuzionate și trimise la ieșirea standard." #. type: textblock #: ../../debconf-mergetemplate:30 msgid "" "This can be especially useful if you are dealing with translated template " "files. In this case, you might have your main template file, plus several " "other files provided by the translators. These files will have translated " "fields in them, and maybe the translators left in the english versions of " "the fields they translated, for their reference." msgstr "" "Acest lucru poate fi util mai ales dacă aveți de-a face cu fișiere șablon " "traduse. În acest caz, s-ar putea să aveți fișierul șablon principal, plus " "alte câteva fișiere furnizate de traducători. Aceste fișiere vor conține " "câmpuri traduse și poate că traducătorii au lăsat versiunile în limba " "engleză ale câmpurilor pe care le-au tradus, pentru referință." #. type: textblock #: ../../debconf-mergetemplate:36 msgid "" "So, you want to merge together all the translated templates files with your " "main templates file. Any fields that are unique to the translated files need " "to be added in to the correct templates, but any fields they have in common " "should be superseded by the fields in the main file (which might be more up-" "to-date)." msgstr "" "Deci, doriți să fuzionați toate fișierele de șabloane traduse cu fișierul " "principal de șabloane. Orice câmpuri care sunt unice pentru fișierele " "traduse trebuie adăugate în șabloanele corecte, dar orice câmpuri pe care le " "au în comun trebuie înlocuite de câmpurile din fișierul principal (care ar " "putea fi mai actualizate)." #. type: textblock #: ../../debconf-mergetemplate:42 msgid "" "This program handles that case properly, just list each of the translated " "templates files, and then your main templates file last." msgstr "" "Acest program se ocupă de acest caz în mod corespunzător, doar listează " "fiecare dintre fișierele de șabloane traduse și apoi ultimul fișier de " "șabloane principal." #. type: =item #: ../../debconf-mergetemplate:49 msgid "--outdated" msgstr "--outdated" #. type: textblock #: ../../debconf-mergetemplate:51 msgid "" "Merge in even outdated translations. The default is to drop them with a " "warning message." msgstr "" "Fuzionează chiar și traducerile învechite. În mod implicit, acestea sunt " "eliminate cu un mesaj de avertizare." #. type: =item #: ../../debconf-mergetemplate:54 msgid "--drop-old-templates" msgstr "--drop-old-templates" #. type: textblock #: ../../debconf-mergetemplate:56 msgid "" "If a translation has an entire template that is not in the master file (and " "thus is probably an old template), drop that entire template." msgstr "" "Dacă o traducere are un șablon întreg care nu se află în fișierul principal " "(și, prin urmare, este probabil un șablon vechi), renunță la acel șablon " "întreg." #. type: textblock #: ../../debconf-mergetemplate:63 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-set-selections:5 msgid "debconf-set-selections - insert new values into the debconf database" msgstr "debconf-set-selections - inserează noi valori în baza de date debconf" #. type: verbatim #: ../../debconf-set-selections:9 #, no-wrap msgid "" " debconf-set-selections file\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" msgstr "" " debconf-set-selections fișier\n" " debconf-get-selections | ssh gazdă-nouă debconf-set-selections\n" "\n" #. type: textblock #: ../../debconf-set-selections:14 msgid "" "B can be used to pre-seed the debconf database with " "answers, or to change answers in the database. Each question will be marked " "as seen to prevent debconf from asking the question interactively." msgstr "" "B poate fi utilizat pentru a preînsămânța baza de " "date debconf cu răspunsuri sau pentru a modifica răspunsurile din baza de " "date. Fiecare întrebare va fi marcată ca văzută pentru a împiedica debconf " "să pună întrebarea în mod interactiv." #. type: textblock #: ../../debconf-set-selections:18 msgid "Reads from a file if a filename is given, otherwise from stdin." msgstr "" "Citește dintr-un fișier dacă este dat un nume de fișier, altfel de la " "intrarea standard." #. type: textblock #: ../../debconf-set-selections:22 msgid "" "Only use this command to seed debconf values for packages that will be or " "are installed. Otherwise you can end up with values in the database for " "uninstalled packages that will not go away, or with worse problems involving " "shared values. It is recommended that this only be used to seed the database " "if the originating machine has an identical install." msgstr "" "Utilizați această comandă numai pentru a însămânța valorile debconf pentru " "pachetele care vor fi sau sunt instalate. În caz contrar, vă puteți trezi cu " "valori în baza de date pentru pachete dezinstalate care nu vor dispărea sau " "cu probleme mai grave care implică valori partajate. Se recomandă utilizarea " "acestei comenzi pentru însămânțarea bazei de date numai dacă mașina de " "origine are o instalare identică." #. type: =head1 #: ../../debconf-set-selections:28 msgid "DATA FORMAT" msgstr "FORMATUL DATELOR" #. type: textblock #: ../../debconf-set-selections:30 msgid "" "The data is a series of lines. Lines beginning with a # character are " "comments. Blank lines are ignored. All other lines set the value of one " "question, and should contain four values, each separated by one character of " "whitespace. The first value is the name of the package that owns the " "question. The second is the name of the question, the third value is the " "type of this question, and the fourth value (through the end of the line) " "is the value to use for the answer of the question." msgstr "" "Datele sunt o serie de linii. Liniile care încep cu un caracter „#” sunt " "comentarii. Liniile goale sunt ignorate. Toate celelalte linii stabilesc " "valoarea unei întrebări și ar trebui să conțină patru valori, fiecare " "separată de un caracter de spațiu alb. Prima valoare este numele pachetului " "care deține întrebarea. A doua este numele întrebării, a treia valoare este " "tipul acestei întrebări, iar a patra valoare (până la sfârșitul liniei) este " "valoarea care trebuie utilizată pentru răspunsul la întrebare." #. type: textblock #: ../../debconf-set-selections:38 msgid "" "Alternatively, the third value can be \"seen\"; then the preseed line only " "controls whether the question is marked as seen in debconf's database. Note " "that preseeding a question's value defaults to marking that question as " "seen, so to override the default value without marking a question seen, you " "need two lines." msgstr "" "Alternativ, a treia valoare poate fi „seen” (văzută); atunci linia de pre-" "configurare controlează doar dacă întrebarea este marcată ca văzută în baza " "de date a debconf. Rețineți că preconfigurarea valorii unei întrebări duce " "implicit la marcarea acelei întrebări ca fiind văzută, astfel încât pentru a " "trece peste valoarea implicită fără a marca o întrebare ca fiind văzută, " "aveți nevoie de două linii." #. type: textblock #: ../../debconf-set-selections:44 msgid "" "Lines can be continued to the next line by ending them with a \"\\\" " "character." msgstr "" "Liniile pot fi continuate pe următoarea linie prin terminarea lor cu un " "caracter „\\”." #. type: verbatim #: ../../debconf-set-selections:49 #, no-wrap msgid "" " # Force debconf priority to critical.\n" " debconf debconf/priority select critical\n" "\n" msgstr "" " # Forțează prioritatea debconf la „critică”.\n" " debconf debconf/priority select critical\n" "\n" #. type: verbatim #: ../../debconf-set-selections:52 #, no-wrap msgid "" " # Override default frontend to readline, but allow user to select.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" msgstr "" " # Suprascrie interfața implicită la «readline», dar permite utilizatorului să selecteze.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" #. type: =item #: ../../debconf-set-selections:60 msgid "B<--verbose>, B<-v>" msgstr "B<--verbose>, B<-v>" #. type: textblock #: ../../debconf-set-selections:62 msgid "verbose output" msgstr "ieșire cu mesje informative detaliate" #. type: =item #: ../../debconf-set-selections:64 msgid "B<--checkonly>, B<-c>" msgstr "B<--checkonly>, B<-c>" #. type: textblock #: ../../debconf-set-selections:66 msgid "only check the input file format, do not save changes to database" msgstr "" "verifică doar formatul fișierului de intrare, nu salvează modificările în " "baza de date" #. type: textblock #: ../../debconf-set-selections:72 msgid "L (available in the debconf-utils package)" msgstr "L (disponibil în pachetul debconf-utils)" #. type: textblock #: ../../debconf-show:5 msgid "debconf-show - query the debconf database" msgstr "debconf-show - interoghează baza de date debconf" #. type: verbatim #: ../../debconf-show:9 #, no-wrap msgid "" " debconf-show packagename [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" msgstr "" " debconf-show packagename [...] [--db=nume-bază_date]\n" " debconf-show --listowners [--db=nume-bază_date]\n" " debconf-show --listdbs\n" "\n" #. type: textblock #: ../../debconf-show:15 msgid "B lets you query the debconf database in different ways." msgstr "" "B vă permite să interogați baza de date debconf în diferite " "moduri." #. type: textblock #: ../../debconf-show:17 msgid "" "The most common use is \"debconf-show packagename\", which displays all " "items in the debconf database owned by a given package, and their current " "values. Questions that have been asked already are prefixed with an '*'." msgstr "" "Cea mai comună utilizare este «debconf-show nume-pachet», care afișează " "toate elementele din baza de date debconf deținute de un anumit pachet și " "valorile lor actuale. Întrebările care au fost deja adresate sunt prefixate " "cu un „*”." #. type: textblock #: ../../debconf-show:21 msgid "" "This can be useful as a debugging aid, and especially handy in bug reports " "involving a package's use of debconf." msgstr "" "Acest lucru poate fi util ca ajutor pentru depanare și mai ales în " "rapoartele de erori care implică utilizarea debconf de către un pachet." #. type: =item #: ../../debconf-show:28 msgid "B<--db=>I" msgstr "B<--db=>I" #. type: textblock #: ../../debconf-show:30 msgid "" "Specify the database to query. By default, debconf-show queries the main " "database." msgstr "" "Specifică baza de date care urmează să fie interogată. În mod implicit, " "debconf-show interoghează baza de date principală." #. type: =item #: ../../debconf-show:33 msgid "B<--listowners>" msgstr "B<--listowners>" #. type: textblock #: ../../debconf-show:35 msgid "" "Lists all owners of questions in the database. Generally an owner is " "equivalent to a debian package name." msgstr "" "Listează toți proprietarii întrebărilor din baza de date. În general, un " "proprietar este echivalent cu un nume de pachet debian." #. type: =item #: ../../debconf-show:38 msgid "B<--listdbs>" msgstr "B<--listdbs>" #. type: textblock #: ../../debconf-show:40 msgid "Lists all available databases." msgstr "Listează toate bazele de date disponibile." #. type: textblock #: ../../debconf-show:154 msgid "Joey Hess and Sylvain Ferriol" msgstr "Joey Hess și Sylvain Ferriol" #. type: textblock #: ../../dpkg-preconfigure:5 msgid "" "dpkg-preconfigure - let packages ask questions prior to their installation" msgstr "" "dpkg-preconfigure - permite pachetelor să pună întrebări înainte de " "instalarea lor" #. type: verbatim #: ../../dpkg-preconfigure:9 #, no-wrap msgid "" " dpkg-preconfigure [options] package.deb\n" "\n" msgstr "" " dpkg-preconfigure [opțiuni] pachet.deb\n" "\n" #. type: verbatim #: ../../dpkg-preconfigure:11 #, no-wrap msgid "" " dpkg-preconfigure --apt\n" "\n" msgstr "" " dpkg-preconfigure --apt\n" "\n" #. type: textblock #: ../../dpkg-preconfigure:15 msgid "" "B lets packages ask questions before they are installed. " "It operates on a set of debian packages, and all packages that use debconf " "will have their config script run so they can examine the system and ask " "questions." msgstr "" "B permite pachetelor să pună întrebări înainte de a fi " "instalate. Funcționează pe un set de pachete debian, iar toate pachetele " "care utilizează debconf vor avea scriptul lor de configurare rulat astfel " "încât să poată examina sistemul și să pună întrebări." #. type: textblock #: ../../dpkg-preconfigure:30 msgid "" "Set the lowest priority of questions you are interested in. Any questions " "with a priority below the selected priority will be ignored and their " "default answers will be used." msgstr "" "Stabiliți cea mai mică prioritate a întrebărilor care vă interesează. Orice " "întrebare cu o prioritate mai mică decât prioritatea selectată va fi " "ignorată și vor fi utilizate răspunsurile implicite ale acesteia." #. type: =item #: ../../dpkg-preconfigure:38 msgid "B<--apt>" msgstr "B<--apt>" #. type: textblock #: ../../dpkg-preconfigure:40 msgid "" "Run in apt mode. It will expect to read a set of package filenames from " "stdin, rather than getting them as parameters. Typically this is used to " "make apt run dpkg-preconfigure on all packages before they are installed. " "To do this, add something like this to /etc/apt/apt.conf:" msgstr "" "Rulează în modul apt. Se va aștepta să citească un set de nume de fișiere de " "pachete de la intrarea standard, mai degrabă decât să le obțină ca " "parametri. De obicei, acest lucru este utilizat pentru a face «apt» să " "ruleze «dpkg-preconfigure» pe toate pachetele înainte ca acestea să fie " "instalate. Pentru a face acest lucru, adăugați ceva de tipul acesta la „/etc/" "apt/apt.conf”:" #. type: verbatim #: ../../dpkg-preconfigure:45 #, no-wrap msgid "" " // Pre-configure all packages before\n" " // they are installed.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" msgstr "" " // Pre- configurați toate pachetele înainte\n" " // ca acestea să fie instalate.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" #. type: =item #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69 msgid "B<-h>, B<--help>" msgstr "B<-h>, B<--help>" #. type: textblock #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71 msgid "Display usage help." msgstr "Afișează ajutorul de utilizare." #. type: textblock #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79 msgid "L" msgstr "L" #. type: textblock #: ../../dpkg-reconfigure:5 msgid "dpkg-reconfigure - reconfigure an already installed package" msgstr "dpkg-reconfigure - reconfigurează un pachet deja instalat" #. type: verbatim #: ../../dpkg-reconfigure:9 #, no-wrap msgid "" " dpkg-reconfigure [options] packages\n" "\n" msgstr "" " dpkg-reconfigure [opțiuni] pachete\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:13 msgid "" "B reconfigures packages after they have already been " "installed. Pass it the names of a package or packages to reconfigure. It " "will ask configuration questions, much like when the package was first " "installed." msgstr "" "B reconfigurează pachetele după ce acestea au fost deja " "instalate. Pasați-i numele pachetului sau pachetelor de reconfigurat. Acesta " "va pune întrebări de configurare, la fel ca atunci când pachetul a fost " "instalat pentru prima dată." #. type: textblock #: ../../dpkg-reconfigure:18 msgid "" "If you just want to see the current configuration of a package, see " "L instead." msgstr "" "Dacă doriți doar să vedeți configurația curentă a unui pachet, consultați în " "schimb L." #. type: textblock #: ../../dpkg-reconfigure:27 msgid "" "Select the frontend to use. The default frontend can be permanently changed " "by:" msgstr "" "Selectați interfața care urmează să fie utilizată. Interfața implicită poate " "fi modificată permanent prin:" #. type: verbatim #: ../../dpkg-reconfigure:30 #, no-wrap msgid "" " dpkg-reconfigure debconf\n" "\n" msgstr "" " dpkg-reconfigure debconf\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:32 msgid "" "Note that if you normally have debconf set to use the noninteractive " "frontend, dpkg-reconfigure will use the dialog frontend instead, so you " "actually get to reconfigure the package." msgstr "" "Rețineți că, dacă în mod normal «debconf» este configurat pentru a utiliza " "interfața neinteractivă, «dpkg-reconfigure» va utiliza în schimb interfața " "dialog, astfel încât să reconfigurați pachetul." #. type: textblock #: ../../dpkg-reconfigure:38 msgid "" "Specify the minimum priority of question that will be displayed. dpkg-" "reconfigure normally shows low priority questions no matter what your " "default priority is. See L for a list." msgstr "" "Specificați prioritatea minimă a întrebării care va fi afișată. «dpkg-" "reconfigure» afișează în mod normal întrebări cu prioritate scăzută, " "indiferent de prioritatea implicită. Consultați L pentru o listă." #. type: =item #: ../../dpkg-reconfigure:46 msgid "B<--default-priority>" msgstr "B<--default-priority>" #. type: textblock #: ../../dpkg-reconfigure:48 msgid "" "Use whatever the default priority of question is, instead of forcing the " "priority to low." msgstr "" "Utilizează prioritatea implicită a întrebării, în loc să forțeze prioritatea " "să fie scăzută." #. type: =item #: ../../dpkg-reconfigure:51 msgid "B<-u>, B<--unseen-only>" msgstr "B<-u>, B<--unseen-only>" #. type: textblock #: ../../dpkg-reconfigure:53 msgid "" "By default, all questions are shown, even if they have already been " "answered. If this parameter is set though, only questions that have not yet " "been seen will be asked." msgstr "" "În mod implicit, sunt afișate toate întrebările, chiar dacă s-a răspuns deja " "la ele. Totuși, dacă acest parametru este definit, vor fi adresate numai " "întrebările care nu au fost încă văzute." #. type: =item #: ../../dpkg-reconfigure:57 msgid "B<--force>" msgstr "B<--force>" #. type: textblock #: ../../dpkg-reconfigure:59 msgid "" "Force dpkg-reconfigure to reconfigure a package even if the package is in an " "inconsistent or broken state. Use with caution." msgstr "" "Forțează «dpkg-reconfigure» să reconfigureze un pachet chiar dacă pachetul " "se află într-o stare inconsistentă sau deteriorată. Utilizați cu precauție." #. type: =item #: ../../dpkg-reconfigure:62 msgid "B<--no-reload>" msgstr "B<--no-reload>" #. type: textblock #: ../../dpkg-reconfigure:64 msgid "" "Prevent dpkg-reconfigure from reloading templates. Use with caution; this " "will prevent dpkg-reconfigure from repairing broken templates databases. " "However, it may be useful in constrained environments where rewriting the " "templates database is expensive." msgstr "" "Împiedică »dpkg-reconfigure» să reîncarce șabloanele. Utilizați cu " "precauție; acest lucru va împiedica «dpkg-reconfigure» să repare bazele de " "date de șabloane defecte. Cu toate acestea, poate fi utilă în medii " "constrânse în care rescrierea bazei de date a șabloanelor este costisitoare." #. type: TH #: debconf.conf.5:1 #, no-wrap msgid "DEBCONF.CONF" msgstr "DEBCONF.CONF" #. type: Plain text #: debconf.conf.5:4 msgid "debconf.conf - debconf configuration file" msgstr "debconf.conf - fișierul de configurare debconf" #. type: Plain text #: debconf.conf.5:12 msgid "" "Debconf is a configuration system for Debian packages. /etc/debconf.conf and " "~/.debconfrc are configuration files debconf uses to determine which " "databases it should use. These databases are used for storing two types of " "information; dynamic config data the user enters into it, and static " "template data. Debconf offers a flexible, extensible database backend. New " "drivers can be created with a minimum of effort, and sets of drivers can be " "combined in various ways." msgstr "" "Debconf este un sistem de configurare pentru pachetele Debian. „/etc/" "debconf.conf” și „~/.debconfrc” sunt fișiere de configurare pe care debconf " "le folosește pentru a determina ce baze de date ar trebui să folosească. " "Aceste baze de date sunt folosite pentru stocarea a două tipuri de " "informații; date de configurare dinamice pe care utilizatorul le introduce " "în ele și date statice de șablon. Debconf oferă un sistem de control " "(driver) a bazelor de date flexibil și extensibil. Noi sisteme de control " "pot fi create cu un minim de efort, iar seturile de sisteme de control pot " "fi combinate în diverse moduri." #. type: Plain text #: debconf.conf.5:17 #, no-wrap msgid "" " # This is a sample config file that is\n" " # sufficient to use debconf.\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" " # Acesta este un exemplu de fișier de configurare\n" " # care este suficient pentru a utiliza debconf.\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:21 #, no-wrap msgid "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" #. type: Plain text #: debconf.conf.5:26 #, no-wrap msgid "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" msgstr "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" #. type: SH #: debconf.conf.5:26 #, no-wrap msgid "FILE FORMAT" msgstr "FORMATUL FIȘIERULUI" #. type: Plain text #: debconf.conf.5:30 msgid "" "The format of this file is a series of stanzas, each separated by at least " "one wholly blank line. Comment lines beginning with a \"#\" character are " "ignored." msgstr "" "Formatul acestui fișier este o serie de strofe, fiecare separată de cel " "puțin un rând complet gol. Liniile de comentariu care încep cu un caracter " "„#” sunt ignorate." #. type: Plain text #: debconf.conf.5:33 msgid "" "The first stanza of the file is special, is used to configure debconf as a " "whole. Two fields are required to be in this first stanza:" msgstr "" "Prima strofă a fișierului este specială, este utilizată pentru a configura " "debconf ca un întreg. Două câmpuri trebuie să fie în această primă strofă:" #. type: TP #: debconf.conf.5:34 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:37 msgid "Specifies the name of the database from which to load config data." msgstr "" "Specifică numele bazei de date din care se încarcă datele de configurare." #. type: TP #: debconf.conf.5:37 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:40 msgid "Specifies the name of the database to use for the template cache." msgstr "" "Specifică numele bazei de date care urmează să fie utilizată pentru cache-ul " "șablonului." #. type: Plain text #: debconf.conf.5:43 msgid "Additional fields that can be used include:" msgstr "Câmpurile suplimentare care pot fi utilizate includ:" #. type: TP #: debconf.conf.5:44 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:48 msgid "" "The frontend Debconf should use, overriding any frontend set in the debconf " "database." msgstr "" "Interfața pe care Debconf ar trebui să o utilizeze, cu prioritate față de " "orice interfață definită în baza de date debconf." #. type: TP #: debconf.conf.5:48 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:52 msgid "" "The priority Debconf should use, overriding any priority set in the debconf " "database." msgstr "" "Prioritatea pe care trebuie să o utilizeze Debconf, care prevalează asupra " "oricărei priorități definite în baza de date debconf." #. type: TP #: debconf.conf.5:52 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:59 msgid "" "The email address Debconf should send mail to if it needs to make sure that " "the admin has seen an important message. Defaults to \"root\", but can be " "set to any valid email address to send the mail there. If you prefer to " "never have debconf send you mail, specify a blank address. This can be " "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable." msgstr "" "Adresa de e poștă electronică la care Debconf ar trebui să trimită mesaje " "dacă trebuie să se asigure că administratorul a văzut un mesaj important. " "Valoarea implicită este „root”, dar poate fi definită la orice adresă de " "poștă electronică validă pentru a trimite mesajul acolo. Dacă preferați ca " "debconf să nu vă trimită niciodată mesaje, specificați o adresă goală. Acest " "lucru poate fi anulat din mers cu variabila de mediu DEBCONF_ADMIN_EMAIL." #. type: Plain text #: debconf.conf.5:59 debconf.conf.5:395 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:67 msgid "" "If set, this will cause debconf to output debugging information to standard " "error. The value it is set to can be something like \"user\", \"developer\", " "\"db\", or a regular expression. Typically, rather than setting it " "permanently in a config file, you will only want to temporarily turn on " "debugging, and the DEBCONF_DEBUG environment variable can be set instead to " "accomplish that." msgstr "" "Dacă este activată, aceasta va determina debconf să emită informații de " "depanare la ieșirea de eroare standard. Valoarea la care este definită poate " "fi ceva de genul „user”, „developer”, „db” sau o expresie regulată. De " "obicei, mai degrabă decât să o definiți permanent într-un fișier de " "configurare, veți dori doar să activați temporar depanarea, iar variabila de " "mediu DEBCONF_DEBUG poate fi definită pentru a realiza acest lucru." #. type: TP #: debconf.conf.5:67 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:72 msgid "" "If set, this will make debconf not display warnings about various things. " "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment " "variable." msgstr "" "Dacă este activată, aceasta va face ca debconf să nu afișeze avertismente cu " "privire la diverse lucruri. Acest lucru poate fi anulat din mers cu " "variabila de mediu DEBCONF_NOWARNINGS." #. type: TP #: debconf.conf.5:72 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:77 msgid "" "Makes debconf log debugging information as it runs, to the syslog. The value " "it is set to controls that is logged. See Debug, above for an explanation of " "the values that can be set to control what is logged." msgstr "" "Face ca debconf să înregistreze informațiile de depanare pe măsură ce " "rulează, în syslog. Valoarea la care este definită controlează ceea ce este " "înregistrat. Consultați Debug, mai sus, pentru o explicație a valorilor care " "pot fi definite pentru a controla ceea ce este înregistrat." #. type: TP #: debconf.conf.5:77 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:82 msgid "" "If set to \"true\", makes some debconf frontends use a special terse display " "mode that outputs as little as possible. Defaults to false. Terse mode may " "be temporarily set via the DEBCONF_TERSE environment variable." msgstr "" "Dacă este stabilită la „true”, face ca unele interfețe debconf să utilizeze " "un mod special de afișare laconică care afișează cât mai puțin posibil. " "Valoarea implicită este „false”. Modul „Terse” (laconic) poate fi activat " "temporar prin intermediul variabilei de mediu DEBCONF_TERSE." #. type: Plain text #: debconf.conf.5:87 #, no-wrap msgid "" "For example, the first stanza of a file might look like this:\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" "De exemplu, prima strofă a unui fișier poate arăta astfel:\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:91 #, no-wrap msgid "" "Each remaining stanza in the file sets up a database. A database stanza\n" "begins by naming the database:\n" " Name: configdb\n" msgstr "" "Fiecare strofă rămasă în fișier stabilește o bază de date. O strofă de bază de date\n" "începe prin numirea bazei de date:\n" " Name: configdb\n" #. type: Plain text #: debconf.conf.5:95 #, no-wrap msgid "" "Then it indicates what database driver should be used for this database.\n" "See DRIVERS, below, for information about what drivers are available.\n" " Driver: File\n" msgstr "" "Apoi indică ce sistem de control (driver) de bază de date ar trebui utilizat pentru această bază de date.\n" "Consultați SISTEME DE CONTROL, mai jos, pentru informații despre sistemele de control disponibile.\n" " Driver: File\n" #. type: Plain text #: debconf.conf.5:100 #, no-wrap msgid "" "You can indicate that the database is not essential to the proper\n" "functioning of debconf by saying it is not required. This will make debconf\n" "muddle on if the database fails for some reason.\n" " Required: false\n" msgstr "" "Puteți indica faptul că baza de date nu este esențială pentru buna funcționare\n" "a debconf prin a spune că nu este necesară. Acest lucru va face ca debconf\n" "să meargă mai departe dacă baza de date eșuează din anumite motive.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:104 #, no-wrap msgid "" "You can mark any database as readonly and debconf will not write anything\n" "to it.\n" " Readonly: true\n" msgstr "" "Puteți marca orice bază de date ca „readonly” (numai-citire) și debconf nu\n" "va scrie nimic în ea.\n" " Readonly: true\n" #. type: Plain text #: debconf.conf.5:107 msgid "" "You can also limit what types of data can go into the database with Accept- " "and Reject- lines; see ACCESS CONTROLS, below." msgstr "" "De asemenea, puteți limita tipurile de date care pot intra în baza de date " "cu ajutorul liniilor Accept- și Reject-; a se vedea CONTROLUL ACCESULUI, mai " "jos." #. type: Plain text #: debconf.conf.5:112 #, no-wrap msgid "" "The remainder of each database stanza is used to provide configuration\n" "specific to that driver. For example, the Text driver needs to know\n" "a directory to put the database in, so you might say:\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" "Restul fiecărei strofe a bazei de date este utilizat pentru a furniza\n" "configurația specifică sistemului de control (driver) respectiv. De exemplu,\n" "sistemul de control „Text” trebuie să știe că are un director în care să\n" "plaseze baza de date, așa că puteți spune:\n" " Filename: /var/cache/debconf/config.dat\n" #. type: SH #: debconf.conf.5:112 #, no-wrap msgid "DRIVERS" msgstr "SISTEME DE CONTROL" #. type: Plain text #: debconf.conf.5:119 msgid "" "A number of drivers are available, and more can be written with little " "difficulty. Drivers come in two general types. First there are real drivers " "-- drivers that actually access and store data in some kind of database, " "which might be on the local filesystem, or on a remote system. Then there " "are meta-drivers that combine other drivers together to form more " "interesting systems. Let's start with the former." msgstr "" "Există o serie de sisteme de control (drivers) disponibile, iar altele pot " "fi scrise cu puțină dificultate. Sistemele de control sunt în general de " "două tipuri. În primul rând, există sisteme de control reale - sisteme de " "control care accesează și stochează efectiv date într-un anumit tip de bază " "de date, care poate fi pe sistemul de fișiere local sau pe un sistem de la " "distanță. Apoi există meta-sisteme de control care combină alte sisteme de " "control pentru a forma sisteme mai interesante. Să începem cu primele." #. type: TP #: debconf.conf.5:120 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:127 msgid "" "This database driver allows debconf to store a whole database in a single " "flat text file. This makes it easy to archive, transfer between machines, " "and edit. It is one of the more compact database formats in terms of disk " "space used. It is also one of the slowest." msgstr "" "Acest sistem de control de bază de date permite debconf să stocheze o " "întreagă bază de date într-un singur fișier text plat. Acest lucru " "facilitează arhivarea, transferul între mașini și editarea. Este unul dintre " "cele mai compacte formate de baze de date în ceea ce privește spațiul " "utilizat pe disc. Este, de asemenea, unul dintre cele mai lente." #. type: Plain text #: debconf.conf.5:130 msgid "" "On the downside, the entire file has to be read in each time debconf starts " "up, and saving it is also slow." msgstr "" "Pe de altă parte, întregul fișier trebuie să fie citit de fiecare dată când " "debconf pornește, iar salvarea acestuia este, de asemenea, lentă." #. type: Plain text #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309 msgid "The following things are configurable for this driver." msgstr "Următoarele lucruri sunt configurabile pentru acest sistem de control." #. type: TP #: debconf.conf.5:133 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:136 msgid "The file to use as the database. This is a required field." msgstr "" "Fișierul care urmează să fie utilizat ca bază de date. Acesta este un câmp " "obligatoriu." #. type: TP #: debconf.conf.5:136 debconf.conf.5:203 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:140 msgid "" "The permissions to create the file with if it does not exist. Defaults to " "600, since the file could contain passwords in some circumstances." msgstr "" "Permisiunile cu care se creează fișierul dacă acesta nu există. Valoarea " "implicită este 600, deoarece fișierul ar putea conține parole în anumite " "circumstanțe." #. type: TP #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 msgid "" "The format of the file. See FORMATS below. Defaults to using a rfc-822 like " "format." msgstr "" "Formatul fișierului. Consultați secțiunea FORMATE de mai jos. În mod " "implicit se utilizează un format asemănător formatului rfc-822." #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:148 debconf.conf.5:184 msgid "" "Whether a backup should be made of the old file before changing it. " "Defaults to true." msgstr "" "Dacă ar trebui făcută o copie de rezervă a fișierului vechi înainte de a-l " "modifica. Valoarea implicită este „true”." #. type: Plain text #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209 msgid "As example stanza setting up a database using this driver:" msgstr "" "Ca exemplu de configurare a unei baze de date folosind acest sistem de " "control:" #. type: Plain text #: debconf.conf.5:155 #, no-wrap msgid "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" msgstr "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" #. type: TP #: debconf.conf.5:156 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:166 msgid "" "This database driver allows debconf to store data in a hierarchical " "directory structure. The names of the various debconf templates and " "questions are used as-is to form directories with files in them. This format " "for the database is the easiest to browse and fiddle with by hand. It has " "very good load and save speeds. It also typically occupies the most space, " "since a lot of small files and subdirectories do take up some additional " "room." msgstr "" "Acest sistem de control de bază de date permite debconf să stocheze date " "într-o structură ierarhică de directoare. Numele diferitelor șabloane și " "întrebări debconf sunt utilizate ca atare pentru a forma directoare cu " "fișiere în ele. Acest format pentru baza de date este cel mai ușor de " "navigat și de manipulat manual. Are viteze foarte bune de încărcare și " "salvare. De asemenea, ocupă de obicei cel mai mult spațiu, deoarece o " "mulțime de fișiere mici și subdirectoare ocupă spațiu suplimentar." #. type: TP #: debconf.conf.5:169 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:172 msgid "The directory to put the files in. Required." msgstr "Directorul în care se pun fișierele. Necesar." #. type: TP #: debconf.conf.5:172 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:176 msgid "" "An extension to add to the names of files. Must be set to a non-empty " "string; defaults to \".dat\"" msgstr "" "O extensie de adăugat la numele fișierelor. Trebuie să fie definită cu un " "șir nevid; valoarea implicită este „.dat”" #. type: Plain text #: debconf.conf.5:192 #, no-wrap msgid "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" msgstr "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" #. type: TP #: debconf.conf.5:193 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:200 msgid "" "This database driver is a compromise between the File and DirTree databases. " "It uses a directory, in which there is (approximately) one file per package " "that uses debconf. This is fairly fast, while using little more room than " "the File database driver." msgstr "" "Acest sistem de control de bază de date este un compromis între bazele de " "date „File” și „DirTree”. Acesta utilizează un director, în care există " "(aproximativ) un fișier pentru fiecare pachet care utilizează debconf. Acest " "lucru este destul de rapid, în timp ce utilizează puțin mai mult spațiu " "decât sistemul de control de bază de date „File”." #. type: Plain text #: debconf.conf.5:203 msgid "" "This driver is configurable in the same ways as is the DirTree driver, plus:" msgstr "" "Acest sistem de control este configurabil în aceleași moduri ca și sistemul " "de control „DirTree”, plus:" #. type: Plain text #: debconf.conf.5:207 msgid "" "The permissions to create files with. Defaults to 600, since the files could " "contain passwords in some circumstances." msgstr "" "Permisiunile cu care se creează fișierele. Valoarea implicită este 600, " "deoarece fișierele ar putea conține parole în anumite circumstanțe." #. type: Plain text #: debconf.conf.5:213 #, no-wrap msgid "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" msgstr "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" #. type: TP #: debconf.conf.5:214 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:218 msgid "" "WARNING: This database driver is currently experimental. Use with caution." msgstr "" "AVERTISMENT: Acest sistem de control de bază de date este în prezent " "experimental. Utilizați-l cu precauție." #. type: Plain text #: debconf.conf.5:226 msgid "" "This database driver accesses a LDAP directory for debconf configuration " "data. Due to the nature of the beast, LDAP directories should typically be " "accessed in read-only mode. This is because multiple accesses can take " "place, and it's generally better for data consistency if nobody tries to " "modify the data while this is happening. Of course, write access is " "supported for those cases where you do want to update the config data in the " "directory." msgstr "" "Acest sistem de control de bază de date accesează un director LDAP pentru " "datele de configurare debconf. Datorită naturii acestui mecanism, " "directoarele LDAP ar trebui accesate în mod normal în modul numai citire. " "Acest lucru se datorează faptului că pot avea loc accesări multiple și, în " "general, este mai bine pentru consistența datelor dacă nimeni nu încearcă să " "modifice datele în acest timp. Desigur, accesul în scris este acceptat " "pentru acele cazuri în care doriți să actualizați datele de configurare din " "director." #. type: Plain text #: debconf.conf.5:229 msgid "" "For information about setting up a LDAP server for debconf, read /usr/share/" "doc/debconf-doc/README.LDAP (from the debconf-doc package)." msgstr "" "Pentru informații despre configurarea unui server LDAP pentru debconf, " "citiți „/usr/share/doc/debconf-doc/README.LDAP” (din pachetul „debconf-doc”)." #. type: Plain text #: debconf.conf.5:232 msgid "" "To use this database driver, you must have the libnet-ldap-perl package " "installed. Debconf suggests that package, but does not depend on it." msgstr "" "Pentru a utiliza acest sistem de control de bază de date, trebuie să aveți " "instalat pachetul „libnet-ldap-perl”. debconf sugerează acest pachet, dar nu " "depinde de el." #. type: Plain text #: debconf.conf.5:236 msgid "" "Please carefully consider the security implications of using a remote " "debconf database. Unless you trust the source, and you trust the intervening " "network, it is not a very safe thing to do." msgstr "" "Vă rugăm să analizați cu atenție implicațiile de securitate ale utilizării " "unei baze de date debconf la distanță. Dacă nu aveți încredere în sursă și " "în rețeaua care intervine, nu este un lucru foarte sigur de făcut." #. type: TP #: debconf.conf.5:239 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:242 msgid "The host name or IP address of an LDAP server to connect to." msgstr "" "Numele gazdei sau adresa IP a unui server LDAP la care să se efectueze " "conectarea." #. type: TP #: debconf.conf.5:242 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:246 msgid "" "The port on which to connect to the LDAP server. If none is given, the " "default port is used." msgstr "" "Portul la care se face conectarea la serverul LDAP. Dacă nu este dat " "niciunul, este utilizat portul implicit." #. type: TP #: debconf.conf.5:246 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:251 msgid "" "The DN under which all config items will be stored. Each config item will be " "assumed to live in a DN of cn=Eitem nameE,EBase DNE. If this " "structure is not followed, all bets are off." msgstr "" "DN-ul sub care vor fi stocate toate elementele de configurare. Se presupune " "că fiecare element de configurare va trăi într-un DN de tipul cn=Enumele " "elementuluiE,EDN de bazăE. Dacă această structură nu este " "respectată, toate pariurile sunt închise..." #. type: TP #: debconf.conf.5:251 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:255 msgid "" "The DN to bind to the directory as. Anonymous bind will be used if none is " "specified." msgstr "" "DN-ul pentru conectarea la director. Dacă nu este specificat niciunul, se va " "utiliza legătura anonimă." #. type: TP #: debconf.conf.5:255 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:259 msgid "" "The password to use in an authenticated bind (used with binddn, above). If " "not specified, anonymous bind will be used." msgstr "" "Parola care urmează să fie utilizată într-o legătură autentificată " "(utilizată cu binddn, mai sus). Dacă nu este specificată, se va utiliza " "legătura anonimă." #. type: Plain text #: debconf.conf.5:265 msgid "" "This option should not be used in the general case. Anonymous binding should " "be sufficient most of the time for read-only access. Specifying a bind DN " "and password should be reserved for the occasional case where you wish to " "update the debconf configuration data." msgstr "" "Această opțiune nu ar trebui utilizată în cazul general. Legarea anonimă ar " "trebui să fie suficientă de cele mai multe ori pentru accesul doar la " "citire. Specificarea unui DN și a unei parole de conectare ar trebui " "rezervată pentru cazurile ocazionale în care doriți să actualizați datele de " "configurare debconf." #. type: TP #: debconf.conf.5:266 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:272 msgid "" "Enable access to individual LDAP entries, instead of fetching them all at " "once in the beginning. This is very useful if you want to monitor your LDAP " "logs for specific debconf keys requested. In this way, you could also write " "custom handling code on the LDAP server part." msgstr "" "Activează accesul la intrări LDAP individuale, în loc de a le prelua pe " "toate odată la început. Acest lucru este foarte util dacă doriți să " "monitorizați jurnalele LDAP pentru anumite chei debconf solicitate. În acest " "fel, ați putea scrie, de asemenea, cod de manipulare personalizat pe partea " "serverului LDAP." #. type: Plain text #: debconf.conf.5:279 msgid "" "Note that when this option is enabled, the connection to the LDAP server is " "kept active during the whole Debconf run. This is a little different from " "the all-in-one behavior where two brief connections are made to LDAP; in the " "beginning to retrieve all the entries, and in the end to save eventual " "changes." msgstr "" "Rețineți că atunci când această opțiune este activată, conexiunea la " "serverul LDAP este menținută activă pe parcursul întregii execuții Debconf. " "Acest lucru este puțin diferit de comportamentul „toate în una” în care se " "fac două conexiuni scurte la LDAP; la început pentru a prelua toate " "intrările și la sfârșit pentru a salva eventualele modificări." #. type: Plain text #: debconf.conf.5:284 msgid "" "An example stanza setting up a database using this driver, assuming the " "remote database is on example.com and can be accessed anonymously:" msgstr "" "Un exemplu de strofă care configurează o bază de date utilizând acest sistem " "de control, presupunând că baza de date de la distanță se află pe " "example.com și poate fi accesată anonim:" #. type: Plain text #: debconf.conf.5:291 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" msgstr "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" #. type: Plain text #: debconf.conf.5:294 msgid "" "Another example, this time the LDAP database is on localhost, and can be " "written to:" msgstr "" "Un alt exemplu, de data aceasta baza de date LDAP este pe localhost și se " "poate scrie în ea:" #. type: Plain text #: debconf.conf.5:301 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" msgstr "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" #. type: TP #: debconf.conf.5:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:307 msgid "" "This special-purpose database driver reads and writes the database from " "standard input/output. It may be useful for people with special needs." msgstr "" "Acest sistem de control de bază de date cu scop special citește și scrie " "baza de date de la intrarea/ieșirea standard. Poate fi util pentru " "persoanele cu nevoi speciale." #. type: Plain text #: debconf.conf.5:314 msgid "" "The format to read and write. See FORMATS below. Defaults to using a rfc-822 " "like format." msgstr "" "Formatul pentru citire și scriere. Consultați secțiunea FORMATE de mai jos. " "În mod implicit se utilizează un format asemănător formatului rfc-822." #. type: TP #: debconf.conf.5:314 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:318 msgid "" "File descriptor number to read from. Defaults to reading from stdin. If set " "to \"none\", the database will not read any data on startup." msgstr "" "Numărul descriptorului de fișier din care se citește. Valoarea implicită " "este citirea de la intrarea standard. Dacă este definit la „none”, baza de " "date nu va citi niciun fel de date la pornire." #. type: TP #: debconf.conf.5:318 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:322 msgid "" "File descriptor number to write to. Defaults to writing to stdout. If set to " "\"none\", the database will be thrown away on shutdown." msgstr "" "Numărul descriptorului de fișier în care se scrie. În mod implicit, se scrie " "la ieșirea standard. Dacă este definit la „none”, baza de date va fi " "înlăturată la închidere." #. type: Plain text #: debconf.conf.5:326 msgid "That's all of the real drivers, now moving on to meta-drivers.." msgstr "" "Aceștia sunt toate sistemele control reale, acum trecem la meta-sistemele de " "control." #. type: TP #: debconf.conf.5:326 debconf.conf.5:354 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:335 msgid "" "This driver stacks up a number of other databases (of any type), and allows " "them to be accessed as one. When debconf asks for a value, the first " "database on the stack that contains the value returns it. If debconf writes " "something to the database, the write normally goes to the first driver on " "the stack that has the item debconf is modifying, and if none do, the new " "item is added to the first writable database on the stack." msgstr "" "Acest sistem de control stivuiește un număr de alte baze de date (de orice " "tip) și le permite să fie accesate ca una singură. Atunci când debconf " "solicită o valoare, prima bază de date din stivă care conține valoarea o " "returnează. Dacă debconf scrie ceva în baza de date, scrierea se face în mod " "normal în primul sistem de control din stivă care are elementul pe care " "debconf îl modifică, iar dacă nu există niciunul, noul element este adăugat " "la prima bază de date din stivă care poate fi scrisă." #. type: Plain text #: debconf.conf.5:343 msgid "" "Things become more interesting if one of the databases on the stack is " "readonly. Consider a stack of the databases foo, bar, and baz, where foo and " "baz are both readonly. Debconf wants to change an item, and this item is " "only present in baz, which is readonly. The stack driver is smart enough to " "realize that won't work, and it will copy the item from baz to bar, and the " "write will take place in bar. Now the item in baz is shadowed by the item in " "bar, and it will not longer be visible to debconf." msgstr "" "Lucrurile devin mai interesante dacă una dintre bazele de date din stivă " "este numai-pentru-citire. „readonly”. Luați în considerare o stivă de baze " "de date I, I și I, unde I și I sunt ambele numai-" "pentru-citire. Debconf dorește să schimbe un element, iar acest element este " "prezent doar în I, care este numai-pentru-citire. Sistemul de control " "de stivă „stack” este suficient de inteligent pentru a realiza că nu va " "funcționa și va copia elementul din I în I, iar scrierea va avea " "loc în I. Acum elementul din I este umbrit de elementul din I " "și nu va mai fi vizibil pentru debconf." #. type: Plain text #: debconf.conf.5:350 msgid "" "This kind of thing is particularly useful if you want to point many systems " "at a central, readonly database, while still allowing things to be " "overridden on each system. When access controls are added to the picture, " "stacks allow you to do many other interesting things, like redirect all " "passwords to one database while a database underneath it handles everything " "else." msgstr "" "Acest tip de lucru este deosebit de util în cazul în care doriți să " "direcționați mai multe sisteme către o bază de date centrală, numai pentru " "citire, permițând în același timp ca anumite lucruri să fie anulate pe " "fiecare sistem. Atunci când se adaugă controlul accesului, stivele vă permit " "să faceți multe alte lucruri interesante, cum ar fi redirecționarea tuturor " "parolelor către o bază de date, în timp ce o bază de date aflată sub aceasta " "se ocupă de orice altceva." #. type: Plain text #: debconf.conf.5:352 msgid "Only one piece of configuration is needed to set up a stack:" msgstr "" "Pentru a configura o stivă „stack” , este necesară o singură piesă de " "configurare:" #. type: Plain text #: debconf.conf.5:358 msgid "" "This is where you specify a list of other databases, by name, to tell it " "what makes up the stack." msgstr "" "Aici specificați o listă de alte baze de date, după nume, pentru a-i spune " "ce alcătuiește stiva." #. type: Plain text #: debconf.conf.5:361 debconf.conf.5:387 msgid "For example:" msgstr "De exemplu:" #. type: Plain text #: debconf.conf.5:365 #, no-wrap msgid "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" msgstr "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" #. type: Plain text #: debconf.conf.5:368 msgid "" "WARNING: The stack driver is not very well tested yet. Use at your own risk." msgstr "" "AVERTISMENT: Sistemul de control de stivă „stack” nu este încă foarte bine " "testat. Utilizați-l pe propriul risc." #. type: Plain text #: debconf.conf.5:374 msgid "" "This driver passes all requests on to another database driver. But it also " "copies all write requests to a backup database driver." msgstr "" "Acest sistem de control transmite toate cererile către un alt sistem de " "control de bază de date. Dar, de asemenea, copiază toate cererile de scriere " "către un sistem de control de bază de date de rezervă." #. type: Plain text #: debconf.conf.5:376 debconf.conf.5:400 msgid "You must specify the following fields to set up this driver:" msgstr "" "Trebuie să specificați următoarele câmpuri pentru a configura acest sistem " "de control de baze de date:" #. type: TP #: debconf.conf.5:378 debconf.conf.5:402 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:381 debconf.conf.5:405 msgid "The database to read from and write to." msgstr "Baza de date din care se citește și în care se scrie." #. type: TP #: debconf.conf.5:381 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:384 msgid "The name of the database to send copies of writes to." msgstr "Numele bazei de date către care se trimit copii ale scrierilor." #. type: Plain text #: debconf.conf.5:392 #, no-wrap msgid "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" msgstr "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" #. type: Plain text #: debconf.conf.5:398 msgid "" "This driver passes all requests on to another database driver, outputting " "verbose debugging output about the request and the result." msgstr "" "Acest sistem de control transmite toate cererile către un alt sistem de " "control de bază de date, generând un rezultat de depanare detaliat cu " "privire la cerere și la rezultat." #. type: SH #: debconf.conf.5:407 #, no-wrap msgid "ACCESS CONTROLS" msgstr "CONTROLUL ACCESULUI" #. type: Plain text #: debconf.conf.5:411 msgid "" "When you set up a database, you can also use some fields to specify access " "controls. You can specify that a database only accepts passwords, for " "example, or make a database only accept things with \"foo\" in their name." msgstr "" "Atunci când configurați o bază de date, puteți, de asemenea, să utilizați " "anumite câmpuri pentru a specifica controlul accesului. De exemplu, puteți " "specifica că o bază de date acceptă numai parole sau că o bază de date " "acceptă numai lucruri cu „foo” în nume." #. type: TP #: debconf.conf.5:411 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:416 msgid "" "As was mentioned earlier, this access control, if set to \"true\", makes a " "database readonly. Debconf will read values from it, but will never write " "anything to it." msgstr "" "După cum s-a menționat mai înainte, acest control de acces, dacă este " "stabilit la „true”, face ca o bază de date să fie de tip „readonly”, numai-" "pentru-citire. Debconf va citi valori din aceasta, dar nu va scrie niciodată " "nimic în ea." #. type: TP #: debconf.conf.5:416 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:422 msgid "" "The text in this field is a perl-compatible regular expression that is " "matched against the names of items as they are requested from the database. " "Only if an items name matches the regular expression, will the database " "allow debconf to access or modify it." msgstr "" "Textul din acest câmp este o expresie regulată compatibilă perl care este " "comparată cu numele elementelor pe măsură ce acestea sunt solicitate din " "baza de date. Numai dacă numele unui element corespunde expresiei regulate, " "baza de date va permite debconf să îl acceseze sau să îl modifice." #. type: TP #: debconf.conf.5:422 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:426 msgid "" "Like Accept-Name, except any item name matching this regular expression will " "be rejected." msgstr "" "La fel ca Accept-Name, cu excepția faptului că orice nume de element care " "corespunde acestei expresii regulate va fi respins." #. type: TP #: debconf.conf.5:426 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:431 msgid "" "Another regular expression, this matches against the type of the item that " "is being accessed. Only if the type matches the regex will access be granted." msgstr "" "O altă expresie regulată, aceasta se potrivește cu tipul elementului care " "este accesat. Accesul va fi permis numai dacă tipul corespunde expresiei " "regulate." #. type: TP #: debconf.conf.5:431 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:435 msgid "" "Like Accept-Type, except any type matching this regular expression will be " "rejected." msgstr "" "La fel ca Accept-Type, cu excepția faptului că orice tip care corespunde " "acestei expresii regulate va fi respins." #. type: SH #: debconf.conf.5:435 #, no-wrap msgid "FORMATS" msgstr "FORMATE" #. type: Plain text #: debconf.conf.5:439 msgid "" "Some of the database drivers use format modules to control the actual format " "in which the database is stored on disk. These formats are currently " "supported:" msgstr "" "Unele dintre sistemele de control de baze de date utilizează module de " "format pentru a controla formatul real în care baza de date este stocată pe " "disc. Acestea sunt formatele acceptate în prezent:" #. type: TP #: debconf.conf.5:439 #, no-wrap msgid "B<822>" msgstr "B<822>" #. type: Plain text #: debconf.conf.5:444 msgid "" "This is a file format loosely based upon the rfc-822 format for email " "message headers. Similar formats are used throughout Debian; in the dpkg " "status file, and so on." msgstr "" "Acesta este un format de fișier bazat în mare măsură pe formatul rfc-822 " "pentru antetele mesajelor de poștă electronică. Formate similare sunt " "folosite în cadrul Debian; în fișierul de stare (status) dpkg, și așa mai " "departe." #. type: Plain text #: debconf.conf.5:446 msgid "Here is a more complicated example of a debconf.conf file." msgstr "Iată un exemplu mai complicat de fișier debconf.conf." #. type: Plain text #: debconf.conf.5:452 #, no-wrap msgid "" " # This stanza is used for general debconf setup.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" msgstr "" " # Această strofă este utilizată pentru configurarea\n" " # generală a debconf.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" #. type: Plain text #: debconf.conf.5:457 #, no-wrap msgid "" " # This is my own local database.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" msgstr "" " # Aceasta este propria mea bază de date locală.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" #. type: Plain text #: debconf.conf.5:469 #, no-wrap msgid "" " # This is another database that I use to hold\n" " # only X server configuration.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # It's sorta hard to work out what questions\n" " # belong to X; it should be using a deeper\n" " # tree structure so I could just match on ^X/\n" " # Oh well.\n" " Accept-Name: xserver|xfree86|xbase\n" msgstr "" " # Aceasta este o altă bază de date pe care o folosesc\n" " # pentru a păstra doar configurația serverului X.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # Este cam greu să-mi dau seama ce întrebări\n" " # aparțin lui X; ar trebui să folosească o structură\n" " # arborescentă mai profundă, astfel încât să pot\n" " # face potrivire doar pentru ^X/\n" " # În fine.\n" " Accept-Name: xserver|xfree86|xbase\n" #. type: Plain text #: debconf.conf.5:485 #, no-wrap msgid "" " # This is our company's global, read-only\n" " # (for me!) debconf database.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # I don't want any passwords that might be\n" " # floating around in there.\n" " Reject-Type: password\n" " # If this db is not accessible for whatever\n" " # reason, carry on anyway.\n" " Required: false\n" msgstr "" " # Aceasta este baza de date debconf globală,\n" " # numai-citire (pentru mine!) a companiei noastre.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # Nu vreau nicio parolă care ar putea\n" " # să se afle pe acolo.\n" " Reject-Type: password\n" " # Dacă această BD nu este accesibilă\n" " # din orice motiv, continuă oricum.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:493 #, no-wrap msgid "" " # I use this database to hold\n" " # passwords safe and secure.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" msgstr "" " # Folosesc această bază de date\n" " # pentru a păstra parolele în siguranță.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" #. type: Plain text #: debconf.conf.5:506 #, no-wrap msgid "" " # Let's put them all together\n" " # in a database stack.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # So, all passwords go to the password database.\n" " # Most X configuration stuff goes to the X\n" " # database, and anything else goes to my main\n" " # database. Values are looked up in each of those\n" " # in turn, and if none has a particular value, it\n" " # is looked up in the company-wide LDAP database\n" " # (unless it's a password).\n" msgstr "" " # Să le punem pe toate împreună într-o bază de date.\n" " # in a database stack.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # Astfel, toate parolele ajung în baza de date a parolelor.\n" " # Cele mai multe lucruri legate de configurarea X se duc\n" " # în baza de date X, iar orice altceva se duce în baza mea\n" " # de date principală. Valorile sunt căutate pe rând în fiecare\n" " # dintre acestea, iar dacă niciuna nu are o anumită valoare,\n" " # aceasta este căutată în baza de date LDAP a întregii\n" " # companii (cu excepția cazului în care este o parolă).\n" #. type: Plain text #: debconf.conf.5:514 #, no-wrap msgid "" " # A database is also used to hold templates. We\n" " # don't need to make this as fancy.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" msgstr "" " # O bază de date este, de asemenea, utilizată pentru\n" " # a păstra șabloanele. Nu este nevoie să o facem\n" " # la fel de sofisticată.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" #. type: SH #: debconf.conf.5:514 confmodule.3:22 #, no-wrap msgid "NOTES" msgstr "NOTE" #. type: Plain text #: debconf.conf.5:517 msgid "" "If you use something like ${HOME} in this file, it will be replaced with the " "value of the named environment variable." msgstr "" "Dacă utilizați ceva de genul ${HOME} în acest fișier, aceasta va fi " "înlocuită cu valoarea variabilei de mediu numită." #. type: Plain text #: debconf.conf.5:521 msgid "" "Environment variables can also be used to override the databases on the fly, " "see B(7)" msgstr "" "Variabilele de mediu pot fi de asemenea utilizate pentru a suprascrie bazele " "de date din mers, a se vedea B(7)" #. type: Plain text #: debconf.conf.5:524 msgid "" "The field names (the part of the line before the colon) is case-insensitive. " "The values, though, are case sensitive." msgstr "" "Numele câmpurilor (partea de linie înainte de două puncte) nu sunt sensibile " "la majuscule. Valorile, însă, sunt sensibile la majuscule." #. type: SH #: debconf.conf.5:524 #, no-wrap msgid "PLANNED ENHANCEMENTS" msgstr "ÎMBUNĂTĂȚIRI PLANIFICATE" #. type: Plain text #: debconf.conf.5:533 msgid "" "More drivers and formats. Some ideas include: A SQL driver, with the " "capability to access a remote database. A DHCP driver, that makes available " "some special things like hostname, IP address, and DNS servers. A driver " "that pulls values out of public DNS records TXT fields. A format that is " "compatible with the output of cdebconf. An override driver, which can " "override the value field or flags of all requests that pass through it." msgstr "" "Mai multe sisteme de control și formate. Unele idei includ: un sistem de " "control „SQL”, cu capacitatea de a accesa o bază de date la distanță. Un " "sistem de control „DHCP,” care pune la dispoziție unele lucruri speciale, " "cum ar fi numele de gazdă, adresa IP și serverele DNS. Un sistem de control " "care extrage valori din câmpurile TXT ale înregistrărilor DNS publice. Un " "format care este compatibil cu rezultatul cdebconf. Un sistem de control de " "suprascriere, care poate suprascrie câmpul de valori sau fanioanele tuturor " "cererilor care trec prin el." #. type: SH #: debconf.conf.5:533 #, no-wrap msgid "FILES" msgstr "FIȘIERE" #. type: Plain text #: debconf.conf.5:535 msgid "/etc/debconf.conf" msgstr "/etc/debconf.conf" #. type: Plain text #: debconf.conf.5:537 msgid "~/.debconfrc" msgstr "~/.debconfrc" #. type: Plain text #: debconf.conf.5:539 msgid "B(7)" msgstr "B(7)" #. type: Plain text #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969 msgid "Joey Hess Ejoeyh@debian.orgE" msgstr "Joey Hess Ejoeyh@debian.orgE" #. type: TH #: confmodule.3:1 #, no-wrap msgid "CONFMODULE" msgstr "CONFMODULE" #. type: Plain text #: confmodule.3:4 msgid "confmodule - communicate with Debian configuration system FrontEnd." msgstr "confmodule - comunică cu interfața sistemului de configurare Debian" #. type: Plain text #: confmodule.3:12 #, no-wrap msgid "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" msgstr "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" #. type: Plain text #: confmodule.3:22 msgid "" "This is a library of shell functions that eases communication with Debian's " "configuration management system. It can communicate with a FrontEnd via the " "debconf protocol. The design is that each command in the protocol is " "represented by one function in this module. The functionname is the same as " "the command, except it is prefixed with \"db_\" and is lower-case. Call the " "function and pass in any parameters you want to follow the command. Any " "textual return code from the FrontEnd will be returned to you in the $RET " "variable, while the numeric return code from the FrontEnd will be returned " "as a return code (and so those return codes must be captured or ignored)." msgstr "" "Aceasta este o bibliotecă de funcții shell care facilitează comunicarea cu " "sistemul de gestionare a configurației Debian. Poate comunica cu o interfață " "prin protocolul debconf. Conceptul este că fiecare comandă din protocol este " "reprezentată de o funcție în acest modul. Numele funcției este același cu al " "comenzii, cu excepția faptului că este prefixat cu „db_” și este scris cu " "minuscule. Apelați la funcție și introduceți orice parametru care urmează " "comenzii. Orice cod de returnare textual de la interfață vă va fi returnat " "în variabila $RET, în timp ce codul de returnare numeric de la interfață va " "fi returnat ca un cod de returnare (și astfel aceste coduri de returnare " "trebuie capturate sau ignorate)." #. type: Plain text #: confmodule.3:29 #, no-wrap msgid "" "Once this library is loaded, any text you later output will go to standard\n" "error, rather than standard output. This is a good thing in general, because\n" "text sent to standard output is interpreted by the FrontEnd as commands. If\n" "you do want to send a command directly to the FrontEnd, you must output it\n" "to file descriptor 3, like this:\n" " echo GET foo/bar E&3\n" msgstr "" "Odată ce această bibliotecă este încărcată, orice text pe care îl scoateți\n" "ulterior va fi trimis la ieșirea de eroare standard, în loc de la ieșirea\n" "standard. Acesta este un lucru bun în general, deoarece textul trimis la\n" "ieșirea standard este interpretat de interfață ca o comandă. Dacă doriți să\n" "trimiteți o comandă direct către interfață, trebuie să o trimiteți la\n" "descriptorul de fișier 3, astfel:\n" " echo GET foo/bar E&3\n" #. type: Plain text #: confmodule.3:36 msgid "" "The library checks to make sure it is actually speaking to a FrontEnd by " "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is " "assumed to be running. If not, the library turns into one, and runs a copy " "of the script that loaded the library connected to it. This means that if " "you source this library, you should do so very near to the top of your " "script, because everything before the sourcing of the library may well be " "run again." msgstr "" "Biblioteca verifică dacă comunică efectiv cu o interfață prin examinarea " "variabilei DEBIAN_HAS_FRONTEND. Dacă aceasta este definită, se presupune că " "rulează o interfață. Dacă nu, biblioteca se transformă într-una și rulează o " "copie a scriptului care a încărcat biblioteca conectată la ea. Aceasta " "înseamnă că, dacă obțineți sursa acestei biblioteci, ar trebui să o faceți " "foarte aproape de partea de sus a scriptului, deoarece este foarte posibil " "ca tot ceea ce precede obținerea sursei bibliotecii să fie executat din nou." #. type: Plain text #: confmodule.3:42 msgid "" "B(7), B(8), B(8), " "debconf_specification in the debian-policy package" msgstr "" "B(7), B(8), B(8), " "debconf_specification în pachetul debian-policy" #. type: TH #: debconf.7:1 #, no-wrap msgid "DEBCONF" msgstr "DEBCONF" #. type: Plain text #: debconf.7:4 msgid "debconf - Debian package configuration system" msgstr "debconf - sistemul de configurare a pachetelor Debian" #. type: Plain text #: debconf.7:8 msgid "" "Debconf is a configuration system for Debian packages. There is a rarely-" "used command named debconf, documented in B(1)" msgstr "" "Debconf este un sistem de configurare pentru pachetele Debian. Există o " "comandă rar utilizată numită debconf, documentată în B(1)" #. type: Plain text #: debconf.7:16 msgid "" "Debconf provides a consistent interface for configuring packages, allowing " "you to choose from several user interface frontends. It supports " "preconfiguring packages before they are installed, which allows large " "installs and upgrades to ask you for all the necessary information up front, " "and then go do the work while you do something else. It lets you, if you're " "in a hurry, skip over less important questions and information while " "installing a package (and revisit it later)." msgstr "" "Debconf oferă o interfață consistentă pentru configurarea pachetelor, " "permițându-vă să alegeți din mai multe interfețe de utilizator. Aceasta " "oferă suport pentru preconfigurarea pachetelor înainte ca acestea să fie " "instalate, ceea ce permite instalărilor și actualizărilor de mari dimensiuni " "să vă ceară toate informațiile necesare în prealabil și apoi să facă treaba " "în timp ce dumneavoastră faceți altceva. Vă permite, dacă vă grăbiți, să " "săriți peste întrebările și informațiile mai puțin importante în timpul " "instalării unui pachet (și să reveniți asupra acestora mai târziu)." #. type: SH #: debconf.7:16 #, no-wrap msgid "Preconfiguring packages" msgstr "Preconfigurarea pachetelor" #. type: Plain text #: debconf.7:22 msgid "" "Debconf can configure packages before they are even installed onto your " "system. This is useful because it lets all the questions the packages are " "going to ask be asked at the beginning of an install, so the rest of the " "install can proceed while you are away getting a cup of coffee." msgstr "" "Debconf poate configura pachetele chiar înainte ca acestea să fie instalate " "în sistemul dumneavoastră. Acest lucru este util deoarece permite ca toate " "întrebările pe care pachetele le vor pune să fie adresate la începutul unei " "instalări, astfel încât restul instalării să poată continua în timp ce " "sunteți plecat să serviți o ceașcă de cafea." #. type: Plain text #: debconf.7:27 msgid "" "If you use apt (version 0.5 or above), and you have apt-utils installed, " "each package apt installs will be automatically preconfigured. This is " "controlled via I" msgstr "" "Dacă utilizați apt (versiunea 0.5 sau ulterioară) și aveți instalat apt-" "utils, fiecare pachet instalat de apt va fi preconfigurat automat. Acest " "lucru este controlat prin intermediul I" #. type: Plain text #: debconf.7:33 msgid "" "Sometimes you might want to preconfigure a package by hand, when you're not " "installing it with apt. You can use B(8) to do that, " "just pass it the filenames of the packages you want to preconfigure. You " "will need apt-utils installed for that to work." msgstr "" "Uneori s-ar putea să doriți să preconfigurați un pachet manual, atunci când " "nu îl instalați cu apt. Puteți utiliza B(8) pentru a face " "acest lucru, doar treceți-i numele de fișiere ale pachetelor pe care doriți " "să le preconfigurați. Veți avea nevoie de apt-utils instalat pentru ca acest " "lucru să funcționeze." #. type: SH #: debconf.7:33 #, no-wrap msgid "Reconfiguring packages" msgstr "Reconfigurarea pachetelor" #. type: Plain text #: debconf.7:40 msgid "" "Suppose you installed the package, and answered debconf's questions, but now " "that you've used it awhile, you realize you want to go back and change some " "of your answers. In the past, reinstalling a package was often the thing to " "do when you got in this situation, but when you reinstall the package, " "debconf seems to remember you have answered the questions, and doesn't ask " "them again (this is a feature)." msgstr "" "Să presupunem că ați instalat pachetul și ați răspuns la întrebările lui " "debconf, dar acum că l-ați folosit o vreme, vă dați seama că doriți să " "reveniți și să modificați unele dintre răspunsurile dumneavoastră. În " "trecut, reinstalarea unui pachet era adesea lucrul care trebuia făcut atunci " "când erați în această situație, dar atunci când reinstalați pachetul, " "debconf pare să își amintească că ați răspuns la întrebări și nu le mai pune " "din nou (aceasta este o caracteristică)." #. type: Plain text #: debconf.7:44 #, no-wrap msgid "" "Luckily, debconf makes it easy to reconfigure any package that uses it.\n" "Suppose you want to reconfigure debconf itself. Just run, as root:\n" " dpkg-reconfigure debconf\n" msgstr "" "Din fericire, debconf facilitează reconfigurarea oricărui pachet care îl utilizează. Să presupunem că doriți să reconfigurați chiar debconf. Trebuie doar să rulați, ca root:\n" " dpkg-reconfigure debconf\n" #. type: Plain text #: debconf.7:49 msgid "" "This will ask all the questions you saw when debconf was first installed. " "It may ask you other questions as well, since it asks even low priority " "questions that may have been skipped when the package was installed. You " "can use it on any other package that uses debconf, as well." msgstr "" "Aceasta va pune toate întrebările pe care le-ați văzut când debconf a fost " "instalat prima dată. Este posibil să vă pună și alte întrebări, deoarece " "pune chiar și întrebări cu prioritate scăzută care ar fi putut fi omise " "atunci când pachetul a fost instalat. Îl puteți utiliza și pe orice alt " "pachet care utilizează debconf." #. type: SH #: debconf.7:49 #, no-wrap msgid "Frontends" msgstr "Interfețe" #. type: Plain text #: debconf.7:53 msgid "" "One of debconf's unique features is that the interface it presents to you is " "only one of many, that can be swapped in at will. There are many debconf " "frontends available:" msgstr "" "Una dintre caracteristicile unice ale debconf este faptul că interfața pe " "care v-o prezintă este doar una dintre multe altele, care pot fi schimbate " "după bunul plac. Există multe interfețe debconf disponibile:" #. type: TP #: debconf.7:53 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:60 msgid "" "The default frontend, this uses the B(1) or B(1) " "programs to display questions to you. It works in text mode." msgstr "" "Interfața implicită, aceasta utilizează programele B(1) sau " "B(1) pentru a vă afișa întrebările. Aceasta funcționează în modul " "text." #. type: TP #: debconf.7:60 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:72 msgid "" "The most traditional frontend, this looks quite similar to how Debian " "configuration always has been: a series of questions, printed out at the " "console using plain text, and prompts done using the readline library. It " "even supports tab completion. The libterm-readline-gnu-perl package is " "strongly recommended if you chose to use this frontend; the default readline " "module does not support prompting with default values. At the minimum, " "you'll need the perl-modules package installed to use this frontend." msgstr "" "Cea mai tradițională interfață, aceasta arată destul de asemănător cu modul " "în care a fost întotdeauna configurarea Debian: o serie de întrebări, " "afișate la consolă folosind text simplu, și solicitări realizate folosind " "biblioteca readline. Oferă chiar și suport pentru completarea cu " "tabulatorul. Pachetul libterm-readline-gnu-perl este foarte recomandat dacă " "alegeți să utilizați această interfață; modulul readline implicit nu acceptă " "solicitarea cu valori implicite. Cel puțin, veți avea nevoie de pachetul " "perl-modules instalat pentru a utiliza această interfață." #. type: Plain text #: debconf.7:77 msgid "" "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to " "the previous question (if that is supported by the package that is using " "debconf), and pagedown (or ctrl-v) will skip forward to the next question." msgstr "" "Această interfață are câteva taste rapide speciale. «pageup» (sau «ctrl-u») " "va reveni la întrebarea anterioară (dacă pachetul care utilizează debconf " "acceptă acest lucru), iar «pagedown» (sau «ctrl-v») va trece la următoarea " "întrebare." #. type: Plain text #: debconf.7:80 msgid "" "This is the best frontend for remote admin work over a slow connection, or " "for those who are comfortable with unix." msgstr "" "Aceasta este cea mai bună interfață pentru munca de administrare de la " "distanță pe o conexiune lentă, sau pentru cei care se descurcă bine cu unix." #. type: TP #: debconf.7:81 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:90 msgid "" "This is the anti-frontend. It never interacts with you at all, and makes the " "default answers be used for all questions. It might mail error messages to " "root, but that's it; otherwise it is completely silent and unobtrusive, a " "perfect frontend for automatic installs. If you are using this front-end, " "and require non-default answers to questions, you will need to preseed the " "debconf database; see the section below on Unattended Package Installation " "for more details." msgstr "" "Aceasta este anti-interfața. Nu interacționează deloc cu dvs. și face ca " "răspunsurile implicite să fie utilizate pentru toate întrebările. Poate " "trimite mesaje de eroare către root, dar asta este tot; în rest, este " "complet silențioasă și discretă, o interfață perfectă pentru instalările " "automate. Dacă utilizați această interfață și aveți nevoie de răspunsuri la " "întrebări care nu sunt implicite, va trebui să preconfigurați baza de date " "debconf; consultați secțiunea de mai jos privind instalarea nesupravegheată " "a pachetelor pentru mai multe detalii." #. type: TP #: debconf.7:90 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:96 msgid "" "This is a modern X GUI using the gtk and gnome libraries. Of course, it " "requires a valid DISPLAY to work; debconf will fall back to other frontends " "if it can't work. Note that this frontend requires you have the libgtk3-perl " "package installed." msgstr "" "Aceasta este o interfață grafică X modernă care utilizează bibliotecile gtk " "și gnome. Desigur, necesită ca variabila de mediu DISPLAY să aibă o valoare " "validă pentru a funcționa; debconf se va întoarce la alte interfețe dacă nu " "poate funcționa. Rețineți că această interfață necesită să aveți instalat " "pachetul libgtk3-perl." #. type: TP #: debconf.7:96 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:102 msgid "" "This frontend provides a modern X GUI based on the KDE Platform. You of " "course need a DISPLAY to use this frontend and you must install debconf-kde-" "helper package. The frontend will fall back to dialog if some of the " "prerequisites are not met." msgstr "" "Această interfață oferă o interfață grafică X modernă bazată pe platforma " "KDE. Desigur, aveți nevoie ca variabila de mediu DISPLAY să aibă o valoare " "validă pentru a utiliza această interfață și trebuie să instalați pachetul " "debconf-kde-helper. Interfața va reveni la dialog dacă unele dintre " "condițiile prealabile nu sunt îndeplinite." #. type: TP #: debconf.7:102 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:110 msgid "" "This is for those fanatics who have to do everything in a text editor. It " "runs your editor on a file that looks something like a typical unix config " "file, and you edit the file to communicate with debconf. Debconf's author " "prefers to not comment regarding the circumstances that led to this frontend " "being written." msgstr "" "Aceasta este pentru acei fanatici care trebuie să facă totul într-un editor " "de text. Acesta rulează editorul dvs. preferat pe un fișier care seamănă cu " "un fișier de configurare unix tipic, iar dvs. editați fișierul pentru a " "comunica cu debconf. Autorul Debconf preferă să nu comenteze cu privire la " "circumstanțele care au dus la scrierea acestei interfețe." #. type: TP #: debconf.7:110 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:120 msgid "" "This frontend acts as a web server, that you connect to with your web " "browser, to browse the questions and answer them. It has a lot of promise, " "but is a little rough so far. When this frontend starts up, it will print " "out the location you should point your web browser to. You have to run the " "web browser on the same machine you are configuring, for security reasons." msgstr "" "Această interfață acționează ca un server web, la care vă conectați cu " "navigatorul dvs. web, pentru a parcurge întrebările și a răspunde la ele. " "Este foarte promițător, dar deocamdată este puțin greoi. Atunci când această " "interfață pornește, ea va afișa locația către care trebuie să îndreptați " "navigatorul dvs. web. Din motive de securitate, trebuie să executați " "navigatorul web pe aceeași mașină pe care o configurați." #. type: Plain text #: debconf.7:126 msgid "" "Do keep in mind that this is not a very secure frontend. Anyone who has " "access to the computer being configured can currently access the web server " "and configure things while this frontend is running. So this is more of a " "proof of concept than anything." msgstr "" "Țineți cont de faptul că aceasta nu este o interfață foarte sigură. Oricine " "are acces la calculatorul care este configurat poate accesa serverul web și " "configura lucrurile în timp ce această interfață rulează. Prin urmare, " "aceasta este mai mult o dovadă de concept decât orice altceva." #. type: Plain text #: debconf.7:133 #, no-wrap msgid "" "You can change the default frontend debconf uses by reconfiguring\n" "debconf. On the other hand, if you just want to change the frontend\n" "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n" "the name of the frontend to use. For example:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" msgstr "" "Puteți schimba interfața implicită utilizată de debconf prin reconfigurarea debconf. Pe de altă parte, dacă doriți să schimbați interfața doar pentru un minut, puteți defini variabila de mediu DEBIAN_FRONTEND la numele interfeței de utilizat. De exemplu:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" #. type: Plain text #: debconf.7:141 msgid "" "The B(8) and B(8) commands also let " "you pass I<--frontend=> to them, followed by the frontend you want them to " "use." msgstr "" "Comenzile B(8) și B(8) vă permit, de " "asemenea, să le pasați opțiunea I<--frontend=>, urmată de numele interfeței " "pe care doriți să o utilizeze." #. type: Plain text #: debconf.7:145 msgid "" "Note that not all frontends will work in all circumstances. If a frontend " "fails to start up for some reason, debconf will print out a message " "explaining why, and fall back to the next-most similar frontend." msgstr "" "Rețineți că nu toate interfețele vor funcționa în toate situațiile. Dacă o " "interfață nu reușește să pornească din anumite motive, debconf va afișa un " "mesaj explicând de ce și va trece la următoarea interfață similară." #. type: SH #: debconf.7:145 #, no-wrap msgid "Priorities" msgstr "Priorități" #. type: Plain text #: debconf.7:152 msgid "" "Another nice feature of debconf is that the questions it asks you are " "prioritized. If you don't want to be bothered about every little thing, you " "can set up debconf to only ask you the most important questions. On the " "other hand, if you are a control freak, you can make it show you all " "questions. Each question has a priority. In increasing order of importance:" msgstr "" "O altă caracteristică plăcută a debconf este că întrebările pe care vi le " "pune sunt prioritizate. Dacă nu doriți să fiți deranjat de fiecare lucru " "mărunt, puteți configura debconf să vă pună doar cele mai importante " "întrebări. Pe de altă parte, dacă sunteți obsedat de control, îl puteți face " "să vă arate toate întrebările. Fiecare întrebare are o prioritate. În " "ordinea crescătoare a importanței:" #. type: TP #: debconf.7:152 debconf-devel.7:294 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:156 msgid "" "Very trivial questions that have defaults that will work in the vast " "majority of cases." msgstr "" "Întrebări foarte banale care au valori implicite care vor funcționa în marea " "majoritate a cazurilor." #. type: TP #: debconf.7:156 debconf-devel.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:159 msgid "Normal questions that have reasonable defaults." msgstr "Întrebări normale care au valori implicite rezonabile." #. type: TP #: debconf.7:159 debconf-devel.7:301 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:162 msgid "Questions that don't have a reasonable default." msgstr "Întrebări care nu au un răspuns implicit rezonabil." #. type: TP #: debconf.7:162 debconf-devel.7:304 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:165 msgid "Questions that you really, really need to see (or else)." msgstr "Întrebări pe care trebuie să le vedeți cu adevărat (altfel...)." #. type: Plain text #: debconf.7:175 msgid "" "Only questions with a priority equal to or greater than the priority you " "choose will be shown to you. You can set the priority value by reconfiguring " "debconf, or temporarily by passing I<--priority=> followed by the value to " "the B(8) and B(8) commands, or by " "setting the DEBIAN_PRIORITY environment variable." msgstr "" "Vi se vor afișa numai întrebările cu o prioritate egală sau mai mare decât " "prioritatea aleasă. Puteți stabili valoarea priorității prin reconfigurarea " "debconf sau temporar, pasând I<--priority=> urmată de valoare, comenzilor " "B(8) și B(8), sau prin definirea " "variabilei de mediu DEBIAN_PRIORITY." #. type: SH #: debconf.7:175 #, no-wrap msgid "Backend Database" msgstr "Baza de date principală" #. type: Plain text #: debconf.7:187 msgid "" "Debconf uses a rather flexible and potentially complicated backend database " "for storing data such as the answers to questions. The file B is used to configure this database. If you need to set up " "something complicated, like make debconf read a remote database to get " "defaults, with local overrides, read the B(5) man page for " "all the gory details. Generally, the backend database is located in B ." msgstr "" "Debconf utilizează o bază de date principală destul de flexibilă și " "potențial complicată pentru stocarea datelor, cum ar fi răspunsurile la " "întrebări. Fișierul B este utilizat pentru a configura " "această bază de date. Dacă trebuie să configurați ceva complicat, cum ar fi " "să faceți debconf să citească o bază de date de la distanță pentru a obține " "valorile implicite, cu suprapuneri locale, citiți pagina de manual " "B(5) pentru toate detaliile sângeroase. În general, baza de " "date principală este localizată în B ." #. type: SH #: debconf.7:187 #, no-wrap msgid "Unattended Package Installation" msgstr "Instalarea nesupravegheată a pachetelor" #. type: Plain text #: debconf.7:194 msgid "" "If you have many machines to manage you will sometimes find yourself in the " "position of needing to perform an unattended installation or upgrade of " "packages on many systems, when the default answers to some configuration " "questions are not acceptable. There are many ways to approach this; all " "involve setting up a database and making debconf use it to get the answers " "you want." msgstr "" "Dacă aveți multe mașini de gestionat, vă veți afla uneori în situația de a " "trebui să efectuați o instalare sau o actualizare nesupravegheată a " "pachetelor pe mai multe sisteme, atunci când răspunsurile implicite la unele " "întrebări de configurare nu sunt acceptabile. Există mai multe moduri de a " "aborda această problemă; toate implică crearea unei baze de date și " "utilizarea acesteia de către debconf pentru a obține răspunsurile dorite." #. type: Plain text #: debconf.7:198 msgid "" "You should really read B(5) before this section, as you need " "to understand how debconf's databases work." msgstr "" "Ar trebui să citiți B(5) înainte de această secțiune, deoarece " "trebuie să înțelegeți cum funcționează bazele de date ale debconf." #. type: Plain text #: debconf.7:205 msgid "" "The easiest way to set up the database is to install the packages on one " "machine and answer their questions as usual. Or you might just use B(8) to configure a set of packages without actually installing " "them. Or you might even decide to write a plain text debconf database by " "hand or something." msgstr "" "Cel mai simplu mod de a configura baza de date este să instalați pachetele " "pe o mașină și să răspundeți la întrebările lor ca de obicei. Sau ați putea " "folosi B(8) pentru a configura un set de pachete fără a " "le instala efectiv. Sau ați putea decide chiar să scrieți manual o bază de " "date debconf în text simplu sau ceva de acest gen." #. type: Plain text #: debconf.7:209 msgid "" "Once you have the database, you need to figure out how to make the remote " "systems use it. This depends of course on the configuration of those systems " "and what database types they are set up to use." msgstr "" "Odată ce aveți baza de date, trebuie să vă dați seama cum să faceți " "sistemele la distanță să o utilizeze. Acest lucru depinde, desigur, de " "configurația acestor sisteme și de tipurile de baze de date pe care sunt " "configurate să le utilizeze." #. type: Plain text #: debconf.7:213 msgid "" "If you are using the LDAP debconf database, an entire network of debian " "machines can also have any or all package installation questions answered " "automatically by a single LDAP server." msgstr "" "Dacă utilizați baza de date debconf LDAP, un singur server LDAP poate " "răspunde automat la oricare sau la toate întrebările privind instalarea " "pachetelor pentru o întreagă rețea de mașini debian." #. type: Plain text #: debconf.7:222 msgid "" "But perhaps you're using something a little bit easier to set up like, say, " "the default debconf database configuration, or you just don't want your " "remote systems to use LDAP all the time. In this case the best approach is " "to temporarily configure the remote systems to stack your database " "underneath their own existing databases, so they pull default values out of " "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and " "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample " "use:" msgstr "" "Dar poate că utilizați ceva mai ușor de configurat, cum ar fi, de exemplu, " "configurația implicită a bazei de date debconf, sau pur și simplu nu doriți " "ca sistemele dvs. de la distanță să utilizeze LDAP tot timpul. În acest caz, " "cea mai bună abordare este să configurați temporar sistemele la distanță " "pentru a stivui baza dvs. de date sub propriile baze de date existente, " "astfel încât să extragă valorile implicite din aceasta. Debconf oferă două " "variabile de mediu, DEBCONF_DB_FALLBACK și DEBCONF_DB_OVERRIDE, pentru a " "facilita acest lucru din mers. Iată un exemplu de utilizare:" #. type: Plain text #: debconf.7:226 #, no-wrap msgid "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" msgstr "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" #. type: Plain text #: debconf.7:232 msgid "" "This makes the debconf on the remote host read in the data that is piped " "across the ssh connection and interpret it as a plain text format debconf " "database. It then uses that database as a fallback database -- a read-only " "database that is queried for answers to questions if the system's main " "debconf database lacks answers." msgstr "" "Acest lucru face ca debconf de pe gazda de la distanță să citească datele " "care sunt transmise prin conexiunea ssh și să le interpreteze ca o bază de " "date debconf în format text simplu. Apoi utilizează această bază de date ca " "bază de date de rezervă - o bază de date numai pentru citire care este " "interogată pentru răspunsuri la întrebări în cazul în care baza de date " "debconf principală a sistemului nu are răspunsuri." #. type: Plain text #: debconf.7:234 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:" msgstr "" "Iată o altă modalitate de a utiliza variabila de mediu DEBCONF_DB_FALLBACK:" #. type: Plain text #: debconf.7:237 #, no-wrap msgid "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" msgstr "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" #. type: Plain text #: debconf.7:242 msgid "" "Here ssh is used to set up a tunneled LDAP connection and run debconf. " "Debconf is told to use the LDAP server as the fallback database. Note the " "use of \"{host:localhost}\" to configure how debconf accesses the LDAP " "database by providing the \"host\" field with a value of \"localhost\"." msgstr "" "Aici ssh este utilizat pentru a configura o conexiune LDAP tunelată și " "pentru a rula debconf. Debconf este instruit să utilizeze serverul LDAP ca " "bază de date de rezervă. Observați utilizarea lui „{host:localhost}” pentru " "a configura modul în care debconf accesează baza de date LDAP prin " "furnizarea câmpului „host” cu valoarea „localhost”." #. type: Plain text #: debconf.7:244 msgid "Here's another method:" msgstr "Iată o altă metodă:" #. type: Plain text #: debconf.7:247 #, no-wrap msgid "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" msgstr "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" #. type: Plain text #: debconf.7:252 msgid "" "Here you copy the database over with scp, and then ssh over and make debconf " "use the file you copied over. This illustrates a shorthand you can use in " "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it " "defaults to \"filename\"." msgstr "" "Aici copiați baza de date cu scp, apoi ssh și faceți debconf să utilizeze " "fișierul pe care l-ați copiat. Acest lucru ilustrează o prescurtare pe care " "o puteți utiliza în parametrii DEBCONF_DB_FALLBACK - dacă un nume de câmp " "este omis, acesta devine implicit „nume fișier”." #. type: Plain text #: debconf.7:261 msgid "" "There is only one problem with these uses of the DEBCONF_DB_FALLBACK " "parameter: While the fallback database can provide answers to questions the " "other debconf databases have never seen, it is only queried as a fallback; " "after the other databases. If you need to instead temporarily override an " "existing value on the remote host, you should instead use the " "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a " "temporary database, but this database is consulted before any others, and " "can be used to override existing values." msgstr "" "Există o singură problemă cu aceste utilizări ale parametrului " "DEBCONF_DB_FALLBACK: În timp ce baza de date de rezervă poate oferi " "răspunsuri la întrebări pe care celelalte baze de date debconf nu le-au " "văzut niciodată, aceasta este interogată doar ca o soluție de rezervă; după " "celelalte baze de date. Dacă trebuie să înlocuiți temporar o valoare " "existentă pe gazda de la distanță, trebuie să utilizați în schimb variabila " "DEBCONF_DB_OVERRIDE. Ca și DEBCONF_DB_FALLBACK, aceasta stabilește o bază de " "date temporară, dar această bază de date este consultată înaintea celorlalte " "și poate fi utilizată pentru a înlocui valorile existente." #. type: SH #: debconf.7:261 #, no-wrap msgid "Developing for Debconf" msgstr "Dezvoltarea pentru Debconf" #. type: Plain text #: debconf.7:266 msgid "" "Package developers and others who want to develop packages that use debconf " "should read B(7) ." msgstr "" "Dezvoltatorii de pachete și alte persoane care doresc să dezvolte pachete " "care utilizează debconf ar trebui să citească B(7) ." #. type: Plain text #: debconf.7:274 msgid "" "Briefly, debconf communicates with maintainer scripts or other programs via " "standard input and output, using a simple line-oriented command language " "similar to that used by common internet protocols such as SMTP. Programs use " "this protocol to ask debconf to display questions to the user, and retrieve " "the user's answers. The questions themselves are defined in a separate file, " "called the \"templates file\", which has a format not unlike a debian " "control file." msgstr "" "Pe scurt, debconf comunică cu scripturile de întreținere sau cu alte " "programe prin intermediul intrării și ieșirii standard, utilizând un limbaj " "de comandă simplu, orientat pe linii, similar cu cel utilizat de " "protocoalele comune de internet, cum ar fi SMTP. Programele utilizează acest " "protocol pentru a solicita debconf să afișeze întrebări utilizatorului și să " "recupereze răspunsurile utilizatorului. Întrebările în sine sunt definite " "într-un fișier separat, denumit fișier de șabloane „templates file”, care " "are un format asemănător unui fișier de control debian." #. type: Plain text #: debconf.7:278 msgid "" "Debian packages which use debconf typically provide both a templates file " "and a \"config\" script (run to preconfigure the package) in the control " "metadata section of the package." msgstr "" "Pachetele Debian care utilizează debconf furnizează de obicei atât un fișier " "de șabloane „templates”, cât și un script „config” (rulat pentru a " "preconfigura pachetul) în secțiunea de metadate de control a pachetului." #. type: SH #: debconf.7:278 #, no-wrap msgid "ENVIRONMENT" msgstr "VARIABILE DE MEDIU" #. type: TP #: debconf.7:279 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:282 msgid "Used to temporarily change the frontend debconf uses. See above." msgstr "" "Utilizată pentru a schimba temporar interfața utilizată de debconf. A se " "vedea mai sus." #. type: TP #: debconf.7:282 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:286 msgid "" "Used to temporarily change the minimum priority of question debconf will " "display. See above." msgstr "" "Utilizată pentru a modifica temporar prioritatea minimă a întrebării pe care " "debconf o va afișa. A se vedea mai sus." #. type: TP #: debconf.7:286 debconf-devel.7:576 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:292 msgid "" "Turns on debugging output on standard error. May be set to a facility name " "or a regular expression which matches a facility name (such as '.*' to " "output all debug info). The facility names include:" msgstr "" "Activează ieșirea de depanare la ieșirea de eroare standard. Poate fi " "definită ca un nume de facilitate sau o expresie regulată care corespunde " "unui nume de facilitate (cum ar fi '.*' pentru a afișa toate informațiile de " "depanare). Numele facilităților includ:" #. type: TP #: debconf.7:292 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:295 msgid "Debugging info of interest to a debconf user." msgstr "Informații de depanare de interes pentru un utilizator debconf." #. type: TP #: debconf.7:295 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:298 msgid "Debugging info of interest to a package developer." msgstr "Informații de depanare de interes pentru un dezvoltator de pachete." #. type: TP #: debconf.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:301 msgid "Debugging info about the backend database." msgstr "Informații de depanare despre baza de date principală." #. type: TP #: debconf.7:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:306 msgid "" "Set to \"yes\" to disable some warnings that debconf may display. Does not " "suppress display of fatal errors." msgstr "" "Definiți la „yes” pentru a dezactiva unele avertismente pe care debconf le " "poate afișa. Nu suprimă afișarea erorilor fatale." #. type: TP #: debconf.7:306 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:310 msgid "" "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on " "the verbiage as much as possible." msgstr "" "Definiți la „yes” pentru a activa modul laconic, în care interfețele debconf " "reduc cantitatea de detalii cât mai mult posibil." #. type: TP #: debconf.7:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:320 msgid "" "Stack a database after the normally used databases, so that it is used as a " "fallback to get configuration information from. See \"Unattended Package " "Installation\" above. If the value of the variable is the name of an " "existing database in debconf.conf, then that database will be used. " "Otherwise, the environment variable can be used to configure a database on " "the fly, by telling the type of database, and optionally passing field:value " "settings, inside curly braces after the type. Spaces are used to separate " "fields, so you cannot specify a field value containing whitespace." msgstr "" "Stivuiește o bază de date după bazele de date utilizate în mod normal, " "astfel încât aceasta să fie utilizată ca soluție de rezervă pentru obținerea " "informațiilor de configurare. Consultați „Instalarea nesupravegheată a " "pachetelor” de mai sus. Dacă valoarea variabilei este numele unei baze de " "date existente în debconf.conf, atunci acea bază de date va fi utilizată. În " "caz contrar, variabila de mediu poate fi utilizată pentru a configura o bază " "de date din mers, prin indicarea tipului de bază de date și, opțional, prin " "transmiterea parametrilor câmp:valoare, în interiorul unor acolade după tip. " "Spațiile sunt utilizate pentru a separa câmpurile, astfel încât nu puteți " "specifica o valoare de câmp care conține spații albe." #. type: Plain text #: debconf.7:323 #, no-wrap msgid "" "Thus, this uses the fallbackdb in debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" msgstr "" "Astfel, aceasta utilizează fallbackdb în debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" #. type: Plain text #: debconf.7:327 #, no-wrap msgid "" "While this sets up a new database of type File, and tells it a filename to\n" "use and turns off backups:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" msgstr "" "În timp ce acest lucru creează o nouă bază de date de tip File, îi indică un nume de fișier de utilizat și dezactivează efectuarea copiilor de rezervă:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" #. type: Plain text #: debconf.7:330 #, no-wrap msgid "" "And as a shorthand, this sets up a database of type File with a filename:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" msgstr "" "Și ca o prescurtare, aceasta creează o bază de date de tip File cu un nume de fișier:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" #. type: Plain text #: debconf.7:333 msgid "" "Note that if a fallback database is set up on the fly, it will be read-only " "by default." msgstr "" "Rețineți că, dacă o bază de date de rezervă este configurată din mers, " "aceasta va fi implicit numai pentru citire." #. type: TP #: debconf.7:333 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:338 msgid "" "Stack a database before the normally used databases, so that it can override " "values from them. The value of the variable works the same as does the value " "of DEBCONF_DB_FALLBACK." msgstr "" "Stivuiește o bază de date înaintea bazelor de date utilizate în mod normal, " "astfel încât să poată trece peste valorile din acestea. Valoarea variabilei " "funcționează la fel ca valoarea lui DEBCONF_DB_FALLBACK." #. type: TP #: debconf.7:338 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:343 msgid "" "Use a given database instead of the normally used databases. This may be " "useful for testing with a separate database without having to create a " "separate debconf.conf, or to avoid locking the normal databases." msgstr "" "Utilizează o anumită bază de date în locul bazelor de date utilizate în mod " "normal. Acest lucru poate fi util pentru testarea cu o bază de date " "separată fără a fi nevoie să creați un debconf.conf separat sau pentru a " "evita blocarea bazelor de date normale." #. type: TP #: debconf.7:343 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:349 msgid "" "If this environment variable is set, debconf will ignore a user's " "~/.debconfrc file, and use the system one instead. If it is set to the name " "of a regular file, debconf will use that file in preference to the system " "configuration files." msgstr "" "Dacă această variabilă de mediu este activată, debconf va ignora fișierul " "~/.debconfrc al unui utilizator și va utiliza în schimb fișierul de sistem. " "Dacă este definită la numele unui fișier obișnuit, debconf va utiliza acel " "fișier cu prioritate față de fișierele de configurare ale sistemului." #. type: TP #: debconf.7:349 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:353 msgid "" "If this environment variable is set, debconf will use dialog in preference " "to whiptail for the dialog frontend." msgstr "" "Dacă această variabilă de mediu este activată, debconf va utiliza dialog în " "locul whiptail pentru interfața de dialog." #. type: TP #: debconf.7:353 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:357 msgid "" "If this environment variable is set, debconf will use Xdialog in preference " "to whiptail for the dialog frontend." msgstr "" "Dacă această variabilă de mediu este activată, debconf va utiliza Xdialog în " "loc de whiptail pentru interfața de dialog." #. type: TP #: debconf.7:357 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:361 msgid "" "Set to \"true\" to cause the seen flag to be set for questions asked in the " "noninteractive frontend." msgstr "" "Stabiliți-o la „true” pentru ca fanionul „seen” să fie activat pentru " "întrebările adresate în interfața neinteractivă." #. type: SH #: debconf.7:361 #, no-wrap msgid "BUGS" msgstr "ERORI" #. type: Plain text #: debconf.7:363 msgid "Probably quite a few, there's a lot of code here." msgstr "Probabil destul de multe, există o grămadă de cod aici." #. type: Plain text #: debconf.7:365 msgid "" "If you do file a bug report, be sure to include the following information:" msgstr "" "Dacă depuneți un raport de eroare, asigurați-vă că includeți următoarele " "informații:" #. type: TP #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484 #: debconf-devel.7:489 #, no-wrap msgid "B<*>" msgstr "B<*>" #. type: Plain text #: debconf.7:368 msgid "The debconf frontend you were using when the problem occurred" msgstr "Interfața debconf pe care o foloseați când a apărut problema" #. type: Plain text #: debconf.7:371 msgid "What you did to trigger the problem." msgstr "Ce ați făcut pentru a declanșa problema." #. type: Plain text #: debconf.7:376 msgid "" "The full text of any error messages. If you can reproduce the bug, do so " "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot." msgstr "" "Textul integral al oricărui mesaj de eroare. Dacă puteți reproduce eroarea, " "faceți acest lucru cu DEBCONF_DEBUG='.*' definită și exportată. Acest lucru " "accelerează foarte mult depanarea." #. type: Plain text #: debconf.7:382 msgid "" "B(5), B(7), B(8), B(8), B(1)," msgstr "" "B(5), B(7), B(8), B(8), B(1)," #. type: TH #: debconf-devel.7:1 #, no-wrap msgid "DEBCONF-DEVEL" msgstr "DEBCONF-DEVEL" #. type: Plain text #: debconf-devel.7:4 msgid "debconf - developers guide" msgstr "debconf - ghidul dezvoltatorilor" #. type: Plain text #: debconf-devel.7:6 msgid "This is a guide for developing packages that use debconf." msgstr "" "Acesta este un ghid pentru dezvoltarea de pachete care utilizează debconf." #. type: Plain text #: debconf-devel.7:9 msgid "" "This manual assumes that you are familiar with debconf as a user, and are " "familiar with the basics of debian package construction." msgstr "" "Acest manual presupune că sunteți familiarizat cu debconf în calitate de " "utilizator și că sunteți familiarizat cu elementele de bază ale construcției " "pachetelor debian." #. type: Plain text #: debconf-devel.7:18 msgid "" "This manual begins by explaining two new files that are added to debian " "packages that use debconf. Then it explains how the debconf protocol works, " "and points you at some libraries that will let your programs speak the " "protocol. It discusses other maintainer scripts that debconf is typically " "used in: the postinst and postrm scripts. Then moves on to more advanced " "topics like shared debconf templates, debugging, and some common techniques " "and pitfalls of programming with debconf. It closes with a discussion of " "debconf's current shortcomings." msgstr "" "Acest manual începe prin a explica două fișiere noi care sunt adăugate la " "pachetele debian care utilizează debconf. Apoi explică modul în care " "funcționează protocolul debconf și vă indică câteva biblioteci care vor " "permite programelor dvs. să utilizeze protocolul. Sunt discutate și alte " "scripturi de întreținere în care debconf este utilizat în mod obișnuit: " "scripturile „postinst” și „postrm”. Apoi trece la subiecte mai avansate, cum " "ar fi șabloanele debconf partajate, depanarea și unele tehnici și capcane " "comune ale programării cu debconf. Se încheie cu o discuție despre " "deficiențele actuale ale debconf." #. type: SH #: debconf-devel.7:18 #, no-wrap msgid "THE CONFIG SCRIPT" msgstr "SCRIPTUL DE CONFIGURARE" #. type: Plain text #: debconf-devel.7:23 msgid "" "Debconf adds an additional maintainer script, the config script, to the set " "of maintainer scripts that can be in debian packages (the postinst, preinst, " "postrm, and prerm). The config script is responsible for asking any " "questions necessary to configure the package." msgstr "" "Debconf adaugă un script de întreținere suplimentar, scriptul „config”, la " "setul de scripturi de întreținere care pot fi în pachetele debian " "(„postinst”, „preinst”, „postrm” și „prerm”). Scriptul config este " "responsabil cu adresarea oricăror întrebări necesare pentru configurarea " "pachetului." #. type: Plain text #: debconf-devel.7:28 msgid "" "Note: It is a little confusing that dpkg refers to running a package's " "postinst script as \"configuring\" the package, since a package that uses " "debconf is often fully pre-configured, by its config script, before the " "postinst ever runs. Oh well." msgstr "" "Notă: Este puțin confuz faptul că dpkg se referă la rularea scriptului " "„postinst” al unui pachet ca la „configurarea” pachetului, deoarece un " "pachet care utilizează debconf este adesea complet pre-configurat, prin " "scriptul său de configurare, înainte ca scriptul „postinst” să fie rulat " "vreodată. În fine!" #. type: Plain text #: debconf-devel.7:34 msgid "" "Like the postinst, the config script is passed two parameters when it is " "run. The first tells what action is being performed, and the second is the " "version of the package that is currently installed. So, like in a postinst, " "you can use dpkg --compare-versions on $2 to make some behavior happen only " "on upgrade from a particular version of a package, and things like that." msgstr "" "La fel ca „postinst”, scriptul „config” primește doi parametri atunci când " "este rulat. Primul spune ce acțiune este efectuată, iar al doilea este " "versiunea pachetului care este instalat în prezent. Astfel, la fel ca în " "„postinst”, puteți utiliza dpkg --compare-versions pe $2 pentru a face ca un " "anumit comportament să se întâmple numai la actualizarea de la o anumită " "versiune a unui pachet și alte lucruri de acest gen." #. type: Plain text #: debconf-devel.7:36 msgid "The config script can be run in one of three ways:" msgstr "Scriptul de configurare poate fi rulat în trei moduri:" #. type: TP #: debconf-devel.7:36 #, no-wrap msgid "B<1>" msgstr "B<1>" #. type: Plain text #: debconf-devel.7:40 msgid "" "If a package is pre-configured, with dpkg-preconfigure, its config script is " "run, and is passed the parameters \"configure\", and installed-version." msgstr "" "Dacă un pachet este preconfigurat, cu dpkg-preconfigure, scriptul său de " "configurare este rulat și i se transmit parametrii „configure” și installed-" "version." #. type: TP #: debconf-devel.7:40 #, no-wrap msgid "B<2>" msgstr "B<2>" #. type: Plain text #: debconf-devel.7:47 msgid "" "When a package's postinst is run, debconf will try to run the config script " "then too, and it will be passed the same parameters it was passed when it is " "pre-configured. This is necessary because the package might not have been " "pre-configured, and the config script still needs to get a chance to run. " "See HACKS for details." msgstr "" "Atunci când scriptul „postinst” al unui pachet este rulat, debconf va " "încerca să ruleze și scriptul „config”, iar acestuia i se vor pasa aceiași " "parametri care i-au fost pasați atunci când a fost preconfigurat. Acest " "lucru este necesar deoarece este posibil ca pachetul să nu fi fost " "preconfigurat, iar scriptul „config” trebuie să aibă în continuare șansa de " "a se executa. Consultați secțiunea TRUCURI pentru detalii." #. type: TP #: debconf-devel.7:47 #, no-wrap msgid "B<3>" msgstr "B<3>" #. type: Plain text #: debconf-devel.7:52 msgid "" "If a package is reconfigured, with dpkg-reconfigure, its config script it " "run, and is passed the parameters \"reconfigure\" and installed-version." msgstr "" "Dacă un pachet este reconfigurat, cu dpkg-reconfigure, scriptul său „config” " "este rulat și i se transmit parametrii „reconfigure” și installed-version." #. type: Plain text #: debconf-devel.7:58 msgid "" "Note that since a typical package install or upgrade using apt runs steps 1 " "and 2, the config script will typically be run twice. It should do nothing " "the second time (to ask questions twice in a row is annoying), and it should " "definitely be idempotent. Luckily, debconf avoids repeating questions by " "default, so this is generally easy to accomplish." msgstr "" "Rețineți că, deoarece o instalare sau o actualizare tipică a unui pachet " "utilizând apt execută pașii 1 și 2, scriptul „config” va fi de obicei " "executat de două ori. Acesta nu ar trebui să facă nimic a doua oară (a pune " "întrebări de două ori la rând este enervant) și ar trebui cu siguranță să " "fie idempotent. Din fericire, debconf evită implicit repetarea întrebărilor, " "astfel încât acest lucru este în general ușor de realizat." #. type: Plain text #: debconf-devel.7:64 msgid "" "Note that the config script is run before the package is unpacked. It should " "only use commands that are in essential packages. The only dependency of " "your package that is guaranteed to be met when its config script is run is a " "dependency (possibly versioned) on debconf itself." msgstr "" "Rețineți că scriptul „config” este rulat înainte ca pachetul să fie " "despachetat. Acesta ar trebui să utilizeze numai comenzile care se află în " "pachetele esențiale. Singura dependență a pachetului dvs. care este " "garantată a fi îndeplinită atunci când scriptul config este rulat este o " "dependență (posibil cu o versiune specificată) de debconf însuși." #. type: Plain text #: debconf-devel.7:70 msgid "" "The config script should not need to modify the filesystem at all. It just " "examines the state of the system, and asks questions, and debconf stores the " "answers to be acted on later by the postinst script. Conversely, the " "postinst script should almost never use debconf to ask questions, but should " "instead act on the answers to questions asked by the config script." msgstr "" "Scriptul „config” nu ar trebui să fie nevoit să modifice deloc sistemul de " "fișiere. Acesta examinează doar starea sistemului și pune întrebări, iar " "debconf stochează răspunsurile pentru a fi utilizate ulterior de scriptul " "„postinst”. În schimb, scriptul „postinst” nu ar trebui să utilizeze aproape " "niciodată debconf pentru a pune întrebări, ci ar trebui să acționeze pe baza " "răspunsurilor la întrebările puse de scriptul „config”." #. type: SH #: debconf-devel.7:70 #, no-wrap msgid "THE TEMPLATES FILE" msgstr "FIȘIERUL DE ȘABLOANE „TEMPLATES”" #. type: Plain text #: debconf-devel.7:73 msgid "" "A package that uses debconf probably wants to ask some questions. These " "questions are stored, in template form, in the templates file." msgstr "" "Un pachet care utilizează debconf dorește probabil să pună câteva întrebări. " "Aceste întrebări sunt stocate, sub formă de șablon, în fișierul templates." #. type: Plain text #: debconf-devel.7:78 msgid "" "Like the config script, the templates file is put in the control.tar.gz " "section of a deb. Its format is similar to a debian control file; a set of " "stanzas separated by blank lines, with each stanza having a RFC822-like form:" msgstr "" "La fel ca scriptul config, fișierul templates este pus în secțiunea " "control.tar.gz a unui deb. Formatul său este similar cu cel al unui fișier " "de control debian; un set de strofe separate prin linii goale, fiecare " "strofă având o formă similară formatului RFC822:" #. type: Plain text #: debconf-devel.7:94 #, no-wrap msgid "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: This is a sample string question.\n" " This is its extended description.\n" " .\n" " Notice that:\n" " - Like in a debian package description, a dot\n" " on its own line sets off a new paragraph.\n" " - Most text is word-wrapped, but doubly-indented\n" " text is left alone, so you can use it for lists\n" " of items, like this list. Be careful, since\n" " it is not word-wrapped, if it's too wide\n" " it will look bad. Using it for short items\n" " is best (so this is a bad example).\n" msgstr "" " Template: foo/bar\n" " Type: string\n" " Def\ault: foo\n" " Description: Aceasta este un exemplu de chestionar.\n" " Aceasta este descrierea sa extinsă.\n" " .\n" " Rețineți că:n\n" " - Ca în descrierea unui pachet debian, un punct plasat\n" " singur pe linie marchează începutul unui nou paragraf.\n" " - Majoritatea textului este încadrat în cuvinte, dar textul\n" " cu dublă aliniere este lăsat singur, deci îl puteți folosi\n" " pentru liste de elemente, precum această listă. Fiți atenți,\n" " deoarece acesta nu este încadrat în cuvinte, dacă este\n" " prea lat va arăta urât. Utilizarea lui pentru elemente scurte\n" " este cel mai potrivit (deci acesta este un exemplu prost).\n" #. type: Plain text #: debconf-devel.7:99 #, no-wrap msgid "" " Template: foo/baz\n" " Type: boolean\n" " Description: Clear enough, no?\n" " This is another question, of boolean type.\n" msgstr "" " Template: foo/baz\n" " Type: boolean\n" " Description: Destul de clar, nu?\n" " Aceasta este o altă întrebare, de tip boolean.\n" #. type: Plain text #: debconf-devel.7:103 msgid "" "For some real-life examples of templates files, see /var/lib/dpkg/info/" "debconf.templates, and other .templates files in that directory." msgstr "" "Pentru câteva exemple reale de fișiere șablon, consultați „/var/lib/dpkg/" "info/debconf.templates” și alte fișiere „.templates” din acel director." #. type: Plain text #: debconf-devel.7:105 msgid "Let's look at each of the fields in turn.." msgstr "Să analizăm pe rând fiecare dintre câmpuri." #. type: TP #: debconf-devel.7:105 #, no-wrap msgid "B