Debian Codegraph @

doc/man/po4a/po/pt_BR.po

raw
1 msgid ""
2 msgstr ""
3 "Project-Id-Version: debconf\n"
4 "POT-Creation-Date: 2024-01-21 19:23+0000\n"
5 "PO-Revision-Date: 2001-12-01 19:04:00-0200\n"
6 "Last-Translator: André Luís Lopes <[email protected]>\n"
7 "Language-Team: Debian-BR Project <[email protected]>\n"
8 "Language: pt_BR\n"
9 "MIME-Version: 1.0\n"
10 "Content-Type: text/plain; charset=UTF-8\n"
11 "Content-Transfer-Encoding: 8bit\n"
12
13 # type: =head1
14 #. type: SH
15 #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3
16 #: ../../debconf-apt-progress:3 ../../debconf-escape:3
17 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3
18 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3
19 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3
20 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3
21 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2
22 #, no-wrap
23 msgid "NAME"
24 msgstr "NOME"
25
26 # type: textblock
27 #. type: textblock
28 #: ../../debconf:5
29 msgid "debconf - run a debconf-using program"
30 msgstr ""
31
32 # type: =head1
33 #. type: SH
34 #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7
35 #: ../../debconf-apt-progress:7 ../../debconf-escape:7
36 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16
37 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14
38 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7
39 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7
40 #: debconf.conf.5:12 confmodule.3:4
41 #, no-wrap
42 msgid "SYNOPSIS"
43 msgstr "RESUMO"
44
45 # type: verbatim
46 #. type: verbatim
47 #: ../../debconf:11
48 #, fuzzy, no-wrap
49 msgid ""
50 " debconf [options] command [args]\n"
51 "\n"
52 msgstr ""
53 " dpkg-reconfigure [opções] pacotes\n"
54 "\n"
55
56 # type: =head1
57 #. type: SH
58 #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20
59 #: ../../debconf-apt-progress:15 ../../debconf-escape:12
60 #: ../../debconf-communicate:13 ../../debconf-copydb:30
61 #: ../../debconf-getlang:21 ../../debconf-get-selections:11
62 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21
63 #: ../../debconf-set-selections:12 ../../debconf-show:13
64 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4
65 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4
66 #, no-wrap
67 msgid "DESCRIPTION"
68 msgstr "DESCRIÇÃO"
69
70 # type: Plain text
71 #. type: textblock
72 #: ../../debconf:15
73 #, fuzzy
74 msgid ""
75 "Debconf is a configuration system for Debian packages. For a debconf "
76 "overview and documentation for sysadmins, see L<debconf(7)> (in the debconf-"
77 "doc package)."
78 msgstr ""
79 "Debconf é um sistema de configuração para pcotes Debian. Não existe um "
80 "comando chamado \"debconf\"."
81
82 # type: textblock
83 #. type: textblock
84 #: ../../debconf:19
85 msgid ""
86 "The B<debconf> program runs a program under debconf's control, setting it up "
87 "to talk with debconf on stdio. The program's output is expected to be "
88 "debconf protocol commands, and it is expected to read result codes on stdin. "
89 "See L<debconf-devel(7)> for details about the debconf protocol."
90 msgstr ""
91
92 # type: textblock
93 #. type: textblock
94 #: ../../debconf:24
95 msgid ""
96 "The command to be run under debconf must be specified in a way that will let "
97 "your PATH find it."
98 msgstr ""
99
100 # type: textblock
101 #. type: textblock
102 #: ../../debconf:27
103 msgid ""
104 "This command is not the usual way that debconf is used. It's more typical "
105 "for debconf to be used via L<dpkg-preconfigure(8)> or L<dpkg-reconfigure(8)>."
106 msgstr ""
107
108 # type: =head1
109 #. type: =head1
110 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36
111 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56
112 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21
113 msgid "OPTIONS"
114 msgstr "OPÇÕES"
115
116 # type: =item
117 #. type: =item
118 #: ../../debconf:34
119 #, fuzzy
120 msgid "B<-o>I<package>, B<--owner=>I<package>"
121 msgstr "B<-f>I<tipo>, B<--frontend=>I<tipo>"
122
123 # type: textblock
124 #. type: textblock
125 #: ../../debconf:36
126 msgid ""
127 "Tell debconf what package the command it is running is a part of. This is "
128 "necessary to get ownership of registered questions right, and to support "
129 "unregister and purge commands properly."
130 msgstr ""
131
132 # type: =item
133 #. type: =item
134 #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25
135 msgid "B<-f>I<type>, B<--frontend=>I<type>"
136 msgstr "B<-f>I<tipo>, B<--frontend=>I<tipo>"
137
138 # type: textblock
139 #. type: textblock
140 #: ../../debconf:42 ../../dpkg-preconfigure:26
141 msgid "Select the frontend to use."
142 msgstr "Selecione o frontend a usar."
143
144 # type: =item
145 #. type: =item
146 #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36
147 msgid "B<-p>I<value>, B<--priority=>I<value>"
148 msgstr "B<-p>I<valor>, B<--priority=>I<valor>"
149
150 # type: Plain text
151 #. type: textblock
152 #: ../../debconf:46
153 #, fuzzy
154 msgid "Specify the minimum priority of question that will be displayed."
155 msgstr ""
156 "Usado para mudar temporariamente o prioridade mínima das questões que o "
157 "debconf exibirá. Veja acima."
158
159 # type: TP
160 #. type: =item
161 #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42
162 #, fuzzy
163 msgid "B<--terse>"
164 msgstr "B<Terse>"
165
166 #. type: textblock
167 #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44
168 msgid "Enables terse output mode. This affects only some frontends."
169 msgstr ""
170
171 # type: =head1
172 #. type: =head1
173 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75
174 #: ../../debconf-set-selections:47
175 msgid "EXAMPLES"
176 msgstr "EXEMPLOS"
177
178 # type: textblock
179 #. type: textblock
180 #: ../../debconf:56
181 msgid "To debug a shell script that uses debconf, you might use:"
182 msgstr ""
183
184 # type: verbatim
185 #. type: verbatim
186 #: ../../debconf:58
187 #, no-wrap
188 msgid ""
189 " DEBCONF_DEBUG=developer debconf my-shell-prog\n"
190 "\n"
191 msgstr ""
192
193 # type: textblock
194 #. type: textblock
195 #: ../../debconf:60
196 msgid "Or, you might use this:"
197 msgstr ""
198
199 # type: verbatim
200 #. type: verbatim
201 #: ../../debconf:62
202 #, no-wrap
203 msgid ""
204 " debconf --frontend=readline sh -x my-shell-prog\n"
205 "\n"
206 msgstr ""
207
208 # type: =head1
209 #. type: SH
210 #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154
211 #: ../../debconf-escape:21 ../../debconf-communicate:39
212 #: ../../debconf-copydb:102 ../../debconf-getlang:74
213 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61
214 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59
215 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376
216 #: debconf-devel.7:958
217 #, no-wrap
218 msgid "SEE ALSO"
219 msgstr "VEJA TAMBÉM"
220
221 # type: textblock
222 #. type: textblock
223 #: ../../debconf:66
224 #, fuzzy
225 msgid "L<debconf-devel(7)>, L<debconf(7)>"
226 msgstr "L<debconf.conf(5)>"
227
228 # type: =head1
229 #. type: SH
230 #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159
231 #: ../../debconf-escape:72 ../../debconf-communicate:74
232 #: ../../debconf-copydb:175 ../../debconf-getlang:256
233 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48
234 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226
235 #: ../../debconf-show:152 ../../dpkg-preconfigure:258
236 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382
237 #: debconf-devel.7:968
238 #, no-wrap
239 msgid "AUTHOR"
240 msgstr "AUTOR"
241
242 # type: Plain text
243 #. type: textblock
244 #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161
245 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76
246 #: ../../debconf-copydb:177 ../../debconf-getlang:258
247 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183
248 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311
249 #, fuzzy
250 msgid "Joey Hess <[email protected]>"
251 msgstr "Joey Hess E<lt>[email protected]<gt>"
252
253 # type: textblock
254 #. type: textblock
255 #: ../../Debconf/Client/ConfModule.pm:5
256 msgid "Debconf::Client::ConfModule - client module for ConfModules"
257 msgstr ""
258
259 # type: verbatim
260 #. type: verbatim
261 #: ../../Debconf/Client/ConfModule.pm:9
262 #, no-wrap
263 msgid ""
264 " use Debconf::Client::ConfModule ':all';\n"
265 " version('2.0');\n"
266 " my $capb=capb('backup');\n"
267 " input(\"medium\", \"foo/bar\");\n"
268 " my @ret=go();\n"
269 " if ($ret[0] == 30) {\n"
270 " \t# Back button pressed.\n"
271 " \t...\n"
272 " }\n"
273 " ...\n"
274 "\n"
275 msgstr ""
276
277 # type: textblock
278 #. type: textblock
279 #: ../../Debconf/Client/ConfModule.pm:22
280 msgid ""
281 "This is a module to ease writing ConfModules for Debian's configuration "
282 "management system. It can communicate with a FrontEnd via the debconf "
283 "protocol (which is documented in full in the debconf_specification in Debian "
284 "policy)."
285 msgstr ""
286
287 # type: textblock
288 #. type: textblock
289 #: ../../Debconf/Client/ConfModule.pm:27
290 msgid ""
291 "The design is that each command in the protocol is represented by one "
292 "function in this module (with the name lower-cased). Call the function and "
293 "pass in any parameters you want to follow the command. If the function is "
294 "called in scalar context, it will return any textual return code. If it is "
295 "called in list context, an array consisting of the numeric return code and "
296 "the textual return code will be returned."
297 msgstr ""
298
299 # type: textblock
300 #. type: textblock
301 #: ../../Debconf/Client/ConfModule.pm:34
302 msgid ""
303 "This module uses Exporter to export all functions it defines. To import "
304 "everything, simply import \":all\"."
305 msgstr ""
306
307 # type: =item
308 #. type: =item
309 #: ../../Debconf/Client/ConfModule.pm:62
310 msgid "import"
311 msgstr ""
312
313 # type: textblock
314 #. type: textblock
315 #: ../../Debconf/Client/ConfModule.pm:64
316 msgid ""
317 "Ensure that a FrontEnd is running. It's a little hackish. If "
318 "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, "
319 "one is started up automatically and stdin and out are connected to it. Note "
320 "that this function is always run when the module is loaded in the usual way."
321 msgstr ""
322
323 # type: =item
324 #. type: =item
325 #: ../../Debconf/Client/ConfModule.pm:95
326 msgid "stop"
327 msgstr ""
328
329 # type: textblock
330 #. type: textblock
331 #: ../../Debconf/Client/ConfModule.pm:97
332 msgid ""
333 "The frontend doesn't send a return code here, so we cannot try to read it or "
334 "we'll block."
335 msgstr ""
336
337 # type: =item
338 #. type: =item
339 #: ../../Debconf/Client/ConfModule.pm:107
340 msgid "AUTOLOAD"
341 msgstr ""
342
343 # type: textblock
344 #. type: textblock
345 #: ../../Debconf/Client/ConfModule.pm:109
346 msgid "Creates handler functions for commands on the fly."
347 msgstr ""
348
349 # type: textblock
350 #. type: textblock
351 #: ../../Debconf/Client/ConfModule.pm:156
352 msgid ""
353 "The debconf specification (/usr/share/doc/debian-policy/"
354 "debconf_specification.txt.gz)."
355 msgstr ""
356
357 # type: textblock
358 #. type: textblock
359 #: ../../debconf-apt-progress:5
360 msgid ""
361 "debconf-apt-progress - install packages using debconf to display a progress "
362 "bar"
363 msgstr ""
364
365 # type: verbatim
366 #. type: verbatim
367 #: ../../debconf-apt-progress:9
368 #, no-wrap
369 msgid ""
370 " debconf-apt-progress [--] command [args ...]\n"
371 " debconf-apt-progress --config\n"
372 " debconf-apt-progress --start\n"
373 " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n"
374 " debconf-apt-progress --stop\n"
375 "\n"
376 msgstr ""
377
378 # type: textblock
379 #. type: textblock
380 #: ../../debconf-apt-progress:17
381 msgid ""
382 "B<debconf-apt-progress> installs packages using debconf to display a "
383 "progress bar. The given I<command> should be any command-line apt frontend; "
384 "specifically, it must send progress information to the file descriptor "
385 "selected by the C<APT::Status-Fd> configuration option, and must keep the "
386 "file descriptors nominated by the C<APT::Keep-Fds> configuration option open "
387 "when invoking debconf (directly or indirectly), as those file descriptors "
388 "will be used for the debconf passthrough protocol."
389 msgstr ""
390
391 # type: textblock
392 #. type: textblock
393 #: ../../debconf-apt-progress:25
394 msgid ""
395 "The arguments to the command you supply should generally include B<-y> (for "
396 "B<apt-get> or B<aptitude>) or similar to avoid the apt frontend prompting "
397 "for input. B<debconf-apt-progress> cannot do this itself because the "
398 "appropriate argument may differ between apt frontends."
399 msgstr ""
400
401 # type: textblock
402 #. type: textblock
403 #: ../../debconf-apt-progress:30
404 msgid ""
405 "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to "
406 "create a progress bar with multiple segments for different stages of "
407 "installation, provided that the caller is a debconf confmodule. The caller "
408 "may also interact with the progress bar itself using the debconf protocol if "
409 "it so desires."
410 msgstr ""
411
412 # type: textblock
413 #. type: textblock
414 #: ../../debconf-apt-progress:36
415 msgid ""
416 "debconf locks its config database when it starts up, which makes it "
417 "unfortunately inconvenient to have one instance of debconf displaying the "
418 "progress bar and another passing through questions from packages being "
419 "installed. If you're using a multiple-segment progress bar, you'll need to "
420 "eval the output of the B<--config> option before starting the debconf "
421 "frontend to work around this. See L<the EXAMPLES section/EXAMPLES> below."
422 msgstr ""
423
424 # type: TP
425 #. type: =item
426 #: ../../debconf-apt-progress:47
427 #, fuzzy
428 msgid "B<--config>"
429 msgstr "B<Config>"
430
431 # type: textblock
432 #. type: textblock
433 #: ../../debconf-apt-progress:49
434 msgid ""
435 "Print environment variables necessary to start up a progress bar frontend."
436 msgstr ""
437
438 # type: =item
439 #. type: =item
440 #: ../../debconf-apt-progress:51
441 #, fuzzy
442 msgid "B<--start>"
443 msgstr "B<--apt>"
444
445 # type: textblock
446 #. type: textblock
447 #: ../../debconf-apt-progress:53
448 msgid ""
449 "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and "
450 "B<--to> to use other endpoints."
451 msgstr ""
452
453 # type: =item
454 #. type: =item
455 #: ../../debconf-apt-progress:56
456 msgid "B<--from> I<waypoint>"
457 msgstr ""
458
459 # type: textblock
460 #. type: textblock
461 #: ../../debconf-apt-progress:58
462 msgid ""
463 "If used with B<--start>, make the progress bar begin at I<waypoint> rather "
464 "than 0."
465 msgstr ""
466
467 # type: textblock
468 #. type: textblock
469 #: ../../debconf-apt-progress:61
470 msgid ""
471 "Otherwise, install packages with their progress bar beginning at this "
472 "\"waypoint\". Must be used with B<--to>."
473 msgstr ""
474
475 # type: =item
476 #. type: =item
477 #: ../../debconf-apt-progress:64
478 msgid "B<--to> I<waypoint>"
479 msgstr ""
480
481 # type: textblock
482 #. type: textblock
483 #: ../../debconf-apt-progress:66
484 msgid ""
485 "If used with B<--start>, make the progress bar end at I<waypoint> rather "
486 "than 100."
487 msgstr ""
488
489 # type: textblock
490 #. type: textblock
491 #: ../../debconf-apt-progress:69
492 msgid ""
493 "Otherwise, install packages with their progress bar ending at this "
494 "\"waypoint\". Must be used with B<--from>."
495 msgstr ""
496
497 # type: =item
498 #. type: =item
499 #: ../../debconf-apt-progress:72
500 #, fuzzy
501 msgid "B<--stop>"
502 msgstr "B<--apt>"
503
504 # type: textblock
505 #. type: textblock
506 #: ../../debconf-apt-progress:74
507 msgid "Stop a running progress bar."
508 msgstr ""
509
510 # type: =item
511 #. type: =item
512 #: ../../debconf-apt-progress:76
513 msgid "B<--no-progress>"
514 msgstr ""
515
516 # type: textblock
517 #. type: textblock
518 #: ../../debconf-apt-progress:78
519 msgid ""
520 "Avoid starting, stopping, or stepping the progress bar. Progress messages "
521 "from apt, media change events, and debconf questions will still be passed "
522 "through to debconf."
523 msgstr ""
524
525 # type: =item
526 #. type: =item
527 #: ../../debconf-apt-progress:82
528 msgid "B<--dlwaypoint> I<percentage>"
529 msgstr ""
530
531 # type: textblock
532 #. type: textblock
533 #: ../../debconf-apt-progress:84
534 msgid ""
535 "Specify what percent of the progress bar to use for downloading packages. "
536 "The remainder will be used for installing packages. The default is to use "
537 "15% for downloading and the remaining 85% for installing."
538 msgstr ""
539
540 # type: =item
541 #. type: =item
542 #: ../../debconf-apt-progress:88
543 msgid "B<--logfile> I<file>"
544 msgstr ""
545
546 # type: textblock
547 #. type: textblock
548 #: ../../debconf-apt-progress:90
549 msgid "Send the normal output from apt to the given file."
550 msgstr ""
551
552 # type: =item
553 #. type: =item
554 #: ../../debconf-apt-progress:92
555 #, fuzzy
556 msgid "B<--logstderr>"
557 msgstr "B<--all>"
558
559 # type: textblock
560 #. type: textblock
561 #: ../../debconf-apt-progress:94
562 msgid ""
563 "Send the normal output from apt to stderr. If you supply neither B<--"
564 "logfile> nor B<--logstderr>, the normal output from apt will be discarded."
565 msgstr ""
566
567 # type: =item
568 #. type: =item
569 #: ../../debconf-apt-progress:98
570 #, fuzzy
571 msgid "B<-->"
572 msgstr "B<--apt>"
573
574 # type: textblock
575 #. type: textblock
576 #: ../../debconf-apt-progress:100
577 msgid ""
578 "Terminate options. Since you will normally need to give at least the B<-y> "
579 "argument to the command being run, you will usually need to use B<--> to "
580 "prevent that being interpreted as an option to B<debconf-apt-progress> "
581 "itself."
582 msgstr ""
583
584 # type: textblock
585 #. type: textblock
586 #: ../../debconf-apt-progress:109
587 msgid ""
588 "Install the GNOME desktop and an X window system development environment "
589 "within a progress bar:"
590 msgstr ""
591
592 # type: verbatim
593 #. type: verbatim
594 #: ../../debconf-apt-progress:112
595 #, no-wrap
596 msgid ""
597 " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
598 "\n"
599 msgstr ""
600
601 # type: textblock
602 #. type: textblock
603 #: ../../debconf-apt-progress:114
604 msgid ""
605 "Install the GNOME, KDE, and XFCE desktops within a single progress bar, "
606 "allocating 45% of the progress bar for each of GNOME and KDE and the "
607 "remaining 10% for XFCE:"
608 msgstr ""
609
610 # type: verbatim
611 #. type: verbatim
612 #: ../../debconf-apt-progress:118
613 #, no-wrap
614 msgid ""
615 " #! /bin/sh\n"
616 " set -e\n"
617 " case $1 in\n"
618 " '')\n"
619 " eval \"$(debconf-apt-progress --config)\"\n"
620 " \"$0\" debconf\n"
621 " ;;\n"
622 " debconf)\n"
623 " . /usr/share/debconf/confmodule\n"
624 " debconf-apt-progress --start\n"
625 " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
626 " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
627 " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
628 " debconf-apt-progress --stop\n"
629 " ;;\n"
630 " esac\n"
631 "\n"
632 msgstr ""
633
634 # type: =head1
635 #. type: =head1
636 #: ../../debconf-apt-progress:135
637 msgid "RETURN CODE"
638 msgstr ""
639
640 # type: textblock
641 #. type: textblock
642 #: ../../debconf-apt-progress:137
643 msgid ""
644 "The exit code of the specified command is returned, unless the user hit the "
645 "cancel button on the progress bar. If the cancel button was hit, a value of "
646 "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 "
647 "will be returned."
648 msgstr ""
649
650 # type: =head1
651 #. type: =head1
652 #: ../../debconf-apt-progress:654
653 #, fuzzy
654 msgid "AUTHORS"
655 msgstr "AUTOR"
656
657 # type: Plain text
658 #. type: textblock
659 #: ../../debconf-apt-progress:656 ../../debconf-escape:74
660 #, fuzzy
661 msgid "Colin Watson <[email protected]>"
662 msgstr "Joey Hess E<lt>[email protected]<gt>"
663
664 # type: textblock
665 #. type: textblock
666 #: ../../debconf-escape:5
667 msgid "debconf-escape - helper when working with debconf's escape capability"
668 msgstr ""
669
670 # type: verbatim
671 #. type: verbatim
672 #: ../../debconf-escape:9
673 #, no-wrap
674 msgid ""
675 " debconf-escape -e < unescaped-text\n"
676 " debconf-escape -u < escaped-text\n"
677 "\n"
678 msgstr ""
679
680 # type: textblock
681 #. type: textblock
682 #: ../../debconf-escape:14
683 msgid ""
684 "When debconf has the 'escape' capability set, it will expect commands you "
685 "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> "
686 "respectively) and will in turn escape backslashes and newlines in its "
687 "replies. This can be used, for example, to substitute multi-line strings "
688 "into templates, or to get multi-line extended descriptions reliably using "
689 "C<METAGET>."
690 msgstr ""
691
692 # type: textblock
693 #. type: textblock
694 #: ../../debconf-escape:23
695 #, fuzzy
696 msgid "L<debconf-devel(7)> (available in the debconf-doc package)"
697 msgstr "L<debconf.conf(5)>"
698
699 # type: textblock
700 #. type: textblock
701 #: ../../debconf-communicate:5
702 msgid "debconf-communicate - communicate with debconf"
703 msgstr "debconf-communicate - comunica-se com debconf"
704
705 # type: verbatim
706 #. type: verbatim
707 #: ../../debconf-communicate:11
708 #, no-wrap
709 msgid ""
710 " echo commands | debconf-communicate [options] [package]\n"
711 "\n"
712 msgstr ""
713 " echo comandos | debconf-communicate [opções] [pacote]\n"
714 "\n"
715
716 # type: textblock
717 #. type: textblock
718 #: ../../debconf-communicate:15
719 msgid ""
720 "B<debconf-communicate> allows you to communicate with debconf on the fly, "
721 "from the command line. The package argument is the name of the package which "
722 "you are pretending to be as you communicate with debconf, and it may be "
723 "omitted if you are lazy. It reads commands in the form used by the debconf "
724 "protocol from stdin. For documentation on the available commands and their "
725 "usage, see the debconf specification."
726 msgstr ""
727 "B<debconf-communicate> lhe permite comunicar-se com o debconf em tempo de "
728 "execução, a partir da linha de comando. O argumento pacote é o nome do "
729 "pacote o qual você pretendo ser enquanto se comunica com o debconf, e pode "
730 "ser omitido se você é preguiçoso. Os comandos são lidos na forma usada pelo "
731 "protocolo debconf a partir da entrada padrão (stdin). Para documentação "
732 "sobre os comandos disponíveis e seu uso, veja a especificação debconf."
733
734 # type: textblock
735 #. type: textblock
736 #: ../../debconf-communicate:22
737 msgid ""
738 "The commands are executed in sequence. The textual return code of each is "
739 "printed out to standard output."
740 msgstr ""
741 "Os comandos são executados em sequência. O código de retorno textual é "
742 "impresso na saída padrão."
743
744 # type: textblock
745 #. type: textblock
746 #: ../../debconf-communicate:25
747 msgid ""
748 "The return value of this program is the numeric return code of the last "
749 "executed command."
750 msgstr ""
751 "O valor de retorno deste programa é o código de retorno numérico do último "
752 "comando executado."
753
754 # type: =head1
755 #. type: SH
756 #: ../../debconf-communicate:28 debconf.conf.5:444
757 #, no-wrap
758 msgid "EXAMPLE"
759 msgstr "EXEMPLO"
760
761 # type: verbatim
762 #. type: verbatim
763 #: ../../debconf-communicate:30
764 #, no-wrap
765 msgid ""
766 " echo get debconf/frontend | debconf-communicate\n"
767 "\n"
768 msgstr ""
769 " echo get debconf/frontend | debconf-communicate\n"
770 "\n"
771
772 # type: textblock
773 #. type: textblock
774 #: ../../debconf-communicate:32
775 msgid "Print out the value of the debconf/frontend question."
776 msgstr "Imprime o valor da questão do debconf/frontend."
777
778 # type: =head1
779 #. type: =head1
780 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25
781 #: ../../debconf-set-selections:20
782 msgid "WARNING"
783 msgstr "AVISO"
784
785 # type: textblock
786 #. type: textblock
787 #: ../../debconf-communicate:36
788 msgid ""
789 "This program should never be used from a maintainer script of a package that "
790 "uses debconf! It may however, be useful in debugging."
791 msgstr ""
792 "Este programa não deverá nunca ser usado a partir de um script de mantenedor "
793 "de um pacote que usa o debconf! Ele pode, porém, ser útil para depuração."
794
795 # type: textblock
796 #. type: textblock
797 #: ../../debconf-communicate:41
798 msgid "L<debconf-loadtemplate(1)>"
799 msgstr "L<debconf-loadtemplate(1)>"
800
801 # type: textblock
802 #. type: textblock
803 #: ../../debconf-copydb:5
804 #, fuzzy
805 msgid "debconf-copydb - copy a debconf database"
806 msgstr "debconf-copydb - copia uma base de dados debconf"
807
808 # type: verbatim
809 #. type: verbatim
810 #: ../../debconf-copydb:19
811 #, fuzzy, no-wrap
812 msgid ""
813 " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n"
814 "\n"
815 msgstr ""
816 " debconf-copydb sourcedb destdb [--pattern=padrão] [--config=Foo:bar]\n"
817 "\n"
818
819 # type: textblock
820 #. type: textblock
821 #: ../../debconf-copydb:32
822 msgid ""
823 "B<debconf-copydb> copies items from an existing debconf database into "
824 "another, possibly new database. The two databases may have different "
825 "formats; if so a conversion will automatically be done."
826 msgstr ""
827 "B<debconf-copydb> copia itens de uma base de dados debconf existente para "
828 "outra base de dados, possivelmente nova. As duas base de dados podem ter "
829 "formatos diferentes; neste caso uma conversão será automaticamente feita."
830
831 # type: =item
832 #. type: =item
833 #: ../../debconf-copydb:40
834 msgid "I<sourcedb>"
835 msgstr "I<sourcedb>"
836
837 # type: textblock
838 #. type: textblock
839 #: ../../debconf-copydb:42
840 msgid ""
841 "The name of the source database. Typically it will be defined in your "
842 "debconf.conf (or .debconfrc) file."
843 msgstr ""
844 "O nome da base dados fonte. Tipicamente está será definida em seu arquivo "
845 "debconf.conf (ou .debconfrc)."
846
847 # type: =item
848 #. type: =item
849 #: ../../debconf-copydb:45
850 msgid "I<destdb>"
851 msgstr "I<destdb>"
852
853 # type: textblock
854 #. type: textblock
855 #: ../../debconf-copydb:47
856 msgid ""
857 "The name of the destination database. It may be defined in debconf.conf or ."
858 "debconfrc, or you might define it on the command line (see below)."
859 msgstr ""
860 "O nome da base de dados de destino. Esse pode ser definido em debconf.conf "
861 "ou .debconfrc, ou você poderá definí-lo na linha de comando (veja abaixo)."
862
863 # type: =item
864 #. type: =item
865 #: ../../debconf-copydb:51
866 msgid "B<-p> I<pattern>, B<--pattern> I<pattern>"
867 msgstr "B<-p> I<padrão>, B<--pattern> I<padrão>"
868
869 # type: textblock
870 #. type: textblock
871 #: ../../debconf-copydb:53
872 msgid ""
873 "If this is specified, only items in I<sourcedb> whose names match the "
874 "pattern will be copied."
875 msgstr ""
876 "Caso este seja especificado, somente itens em I<sourcedb> os quais os nomes "
877 "casem com o padrão serão copiados."
878
879 # type: =item
880 #. type: =item
881 #: ../../debconf-copydb:56
882 #, fuzzy
883 msgid "B<--owner-pattern> I<pattern>"
884 msgstr "B<-p> I<padrão>, B<--pattern> I<padrão>"
885
886 # type: textblock
887 #. type: textblock
888 #: ../../debconf-copydb:58
889 #, fuzzy
890 msgid ""
891 "If this is specified, only items in I<sourcedb> whose owners match the "
892 "pattern will be copied."
893 msgstr ""
894 "Caso este seja especificado, somente itens em I<sourcedb> os quais os nomes "
895 "casem com o padrão serão copiados."
896
897 # type: =item
898 #. type: =item
899 #: ../../debconf-copydb:61
900 msgid "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
901 msgstr "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
902
903 # type: textblock
904 #. type: textblock
905 #: ../../debconf-copydb:63
906 msgid "Set option Foo to bar. This is similar to writing:"
907 msgstr "Define a opção Foo para bar. Isto é similar a escrever :"
908
909 # type: verbatim
910 #. type: verbatim
911 #: ../../debconf-copydb:65
912 #, no-wrap
913 msgid ""
914 " Foo: bar\n"
915 "\n"
916 msgstr ""
917 " Foo: bar\n"
918 "\n"
919
920 # type: textblock
921 #. type: textblock
922 #: ../../debconf-copydb:67
923 #, fuzzy
924 msgid ""
925 "In debconf.conf, except you probably want to leave off the space on the "
926 "command line (or quote it: \"Foo: bar\"). Generally must be used multiple "
927 "times, to build up a full configuration stanza. While blank lines are used "
928 "to separate stanzas in debconf.conf, this program will assume that \"Name:"
929 "dbname\" denotes the beginning of a new stanza."
930 msgstr ""
931 "No debconf.conf, exceto que você provavelmente quer deixar o espaço na linha "
932 "de comando (ou quotá-la: \"Foo: bar\"). Geralmente deve ser usada múltiplas "
933 "vezes para construir uma estrofe de configuração completa. Enquanto linhas "
934 "em branco são usadas para separar estrofes em debconf.conf, este programa "
935 "assumirá que \"Name:dbname\" denota o início de uma nova estrofe."
936
937 # type: verbatim
938 #. type: verbatim
939 #: ../../debconf-copydb:77
940 #, no-wrap
941 msgid ""
942 " debconf-copydb configdb backup\n"
943 "\n"
944 msgstr ""
945 " debconf-copydb configdb backup\n"
946 "\n"
947
948 # type: textblock
949 #. type: textblock
950 #: ../../debconf-copydb:79
951 msgid ""
952 "Copy all of configdb to backup, assuming you already have the backup "
953 "database defined in debconf.conf."
954 msgstr ""
955 "Copie todo o configdb para backup, assumindo que você já tenha a base de "
956 "dados backup definida em debconf.conf."
957
958 # type: verbatim
959 #. type: verbatim
960 #: ../../debconf-copydb:82
961 #, no-wrap
962 msgid ""
963 " debconf-copydb configdb newdb --pattern='^slrn/' \\\n"
964 " \t--config=Name:newdb --config=Driver:File \\\n"
965 "\t--config=Filename:newdb.dat\n"
966 "\n"
967 msgstr ""
968 " debconf-copydb configdb newdb --pattern='^slrn/' \\\n"
969 " \t--config=Name:newdb --config=Driver:File \\\n"
970 "\t--config=Filename:newdb.dat\n"
971 "\n"
972
973 # type: textblock
974 #. type: textblock
975 #: ../../debconf-copydb:86
976 msgid ""
977 "Copy slrn's data out of configdb, and into newdb. newdb is not defined in "
978 "the rc file, so the --config switches set up the database on the fly."
979 msgstr ""
980 "Copia os dados de slrn de configdb para newdb. newdb não é definido no "
981 "arquivo rc, assim as opções --config definem a base de dados em tempo de "
982 "execução."
983
984 # type: verbatim
985 #. type: verbatim
986 #: ../../debconf-copydb:89
987 #, no-wrap
988 msgid ""
989 " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
990 " \t-c InFd:none --pattern='^foo/'\n"
991 "\n"
992 msgstr ""
993 " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
994 " \t-c InFd:none --pattern='^foo/'\n"
995 "\n"
996
997 # type: textblock
998 #. type: textblock
999 #: ../../debconf-copydb:92
1000 #, fuzzy
1001 msgid "Spit out all the items in the debconf database related to package foo."
1002 msgstr ""
1003 "Retira todos os items na base de dados debconf relacionados ao pacote foo."
1004
1005 # type: verbatim
1006 #. type: verbatim
1007 #: ../../debconf-copydb:94
1008 #, no-wrap
1009 msgid ""
1010 " debconf-copydb configdb pipe --config=Name:pipe \\\n"
1011 " --config=Driver:Pipe --config=InFd:none | \\\n"
1012 " \tssh remotehost debconf-copydb pipe configdb \\\n"
1013 "\t\t--config=Name:pipe --config=Driver:Pipe\n"
1014 "\n"
1015 msgstr ""
1016 " debconf-copydb configdb pipe --config=Name:pipe \\\n"
1017 " --config=Driver:Pipe --config=InFd:none | \\\n"
1018 " \tssh remotehost debconf-copydb pipe configdb \\\n"
1019 "\t\t--config=Name:pipe --config=Driver:Pipe\n"
1020 "\n"
1021
1022 # type: textblock
1023 #. type: textblock
1024 #: ../../debconf-copydb:99
1025 msgid ""
1026 "This uses the special purpose pipe driver to copy a database to a remote "
1027 "system."
1028 msgstr ""
1029 "Este usa o controlador de propósito especial pipe para copiar uma base de "
1030 "dados para um sistema remoto."
1031
1032 # type: textblock
1033 #. type: textblock
1034 #: ../../debconf-copydb:104
1035 msgid "L<debconf.conf(5)>"
1036 msgstr "L<debconf.conf(5)>"
1037
1038 # type: textblock
1039 #. type: textblock
1040 #: ../../debconf-getlang:5
1041 msgid "debconf-getlang - extract a language from a templates file"
1042 msgstr "debconf-getlang - extrai um idioma de um arquivo de modelo"
1043
1044 # type: verbatim
1045 #. type: verbatim
1046 #: ../../debconf-getlang:18
1047 #, no-wrap
1048 msgid ""
1049 " debconf-getlang lang master [translation]\n"
1050 " debconf-getlang --stats master translation [...]\n"
1051 "\n"
1052 msgstr ""
1053 " debconf-getlang idioma principal [tradução]\n"
1054 " debconf-getlang --stats principal tradução [...]\n"
1055 "\n"
1056
1057 # type: textblock
1058 #. type: textblock
1059 #: ../../debconf-getlang:23
1060 msgid ""
1061 "Note: This utility is deprecated; you should switch to using the po-debconf "
1062 "package."
1063 msgstr ""
1064
1065 # type: textblock
1066 #. type: textblock
1067 #: ../../debconf-getlang:25
1068 msgid ""
1069 "This program helps make and manage translations of debconf templates. There "
1070 "are basically three situations in which this program might be called:"
1071 msgstr ""
1072 "Este programa ajuda a fazer e gerenciar traduções de modelos debconf. "
1073 "Existem basicamente três situações nas quais este programa deveria ser "
1074 "chamado :"
1075
1076 # type: =item
1077 #. type: =item
1078 #: ../../debconf-getlang:30
1079 msgid "A translation is just being started."
1080 msgstr "Uma tradução está sendo iniciada."
1081
1082 # type: textblock
1083 #. type: textblock
1084 #: ../../debconf-getlang:32
1085 #, fuzzy
1086 msgid ""
1087 "You want to provide the translator with a file they can work on that has the "
1088 "English fields from your templates file, plus blank Field-ll fields for the "
1089 "target language that they can fill in."
1090 msgstr ""
1091 "Você quer oferecer ao tradutor um arquivo com o qual ele possa trabalhar e "
1092 "que tenha os campos em inglês dos seus arquivos de modelos e adicionalmente "
1093 "campos Field-ll em branco para o idioma alvo que o tradutor pode preencher."
1094
1095 # type: textblock
1096 #. type: textblock
1097 #: ../../debconf-getlang:36
1098 msgid ""
1099 "To do this, run the program with first parameter being the code for the "
1100 "language that is being translated to, and the second parameter being the "
1101 "filename of the English templates file."
1102 msgstr ""
1103 "Para fazer isso, execute o programa com o primeiro parâmetro sendo o código "
1104 "para o idioma para o qual o modelo está sendo traduzido, e o segundo "
1105 "parâmetro sendo o nome de arquivo do arquivo de modelo em inglês."
1106
1107 # type: =item
1108 #. type: =item
1109 #: ../../debconf-getlang:40
1110 msgid "A translation is well under way."
1111 msgstr "Uma tradução está bem no meio."
1112
1113 # type: textblock
1114 #. type: textblock
1115 #: ../../debconf-getlang:42
1116 msgid ""
1117 "You have changed some English text, or added more items to your templates "
1118 "file, and you want to send the translators a file with the English text plus "
1119 "their current translations (or you are the translator, and you want to "
1120 "generate such a file for your own use)."
1121 msgstr ""
1122 "Você modificou algum texto em inglês, ou adicionou mais itens em seus "
1123 "arquivos de modelo e quer enviar aos tradutores um arquivo com o texto em "
1124 "inglês mais as traduções atuais deles (ou você é o tradutor e você quer "
1125 "gerar este arquivo para seu próprio uso)."
1126
1127 # type: textblock
1128 #. type: textblock
1129 #: ../../debconf-getlang:47
1130 msgid ""
1131 "To accomplish this, run the program with the first parameter being the the "
1132 "code for the language that is being translated to, the second parameter "
1133 "being the filename of the master English templates file, and the third "
1134 "parameter being the filename of the current translated file."
1135 msgstr ""
1136 "Para fazer isso, execute o programa com o primeiro parâmetro sendo o código "
1137 "para o idioma para o qual você está traduzindo, o segundo parâmetro sendo o "
1138 "nome do arquivo do arquivo de modelo principal em inglês e o terceiro "
1139 "parâmetro sendo o nome de arquivo do arquivo traduzido atual."
1140
1141 # type: textblock
1142 #. type: textblock
1143 #: ../../debconf-getlang:52
1144 msgid ""
1145 "When run this way, the program is smart enough to notice fuzzy translations. "
1146 "For example a fuzzy Description will be output as Description-<lang>-fuzzy, "
1147 "and a new, blank Description-<lang> will be added. Translators should "
1148 "remove the -fuzzy fields as they correct the fuzzy translations."
1149 msgstr ""
1150 "Quando executado deste forma, o prorama é inteligente o bastante para notar "
1151 "traduções fuzzy. Por exemplo, uma descrição fuzzy será escrita como "
1152 "Description-<idioma>-fuzzy, e um novo Description-<idioma> será adicionado. "
1153 "Tradutores devem remover os campos -fuzzy na medida em que corrigem as "
1154 "traduções fuzzy."
1155
1156 # type: =item
1157 #. type: =item
1158 #: ../../debconf-getlang:58
1159 msgid "Checking the status of a translation"
1160 msgstr "Checando o status de uma tradução"
1161
1162 # type: textblock
1163 #. type: textblock
1164 #: ../../debconf-getlang:60
1165 msgid ""
1166 "To check the status of a translation, use the --status flag, and pass the "
1167 "english template file as the first parameter, and all the other translated "
1168 "templates after that. It will output statistics for each of them. For "
1169 "example:"
1170 msgstr ""
1171 "Para checar o status de uma tradução, use a flag --status e passe o arquivo "
1172 "de modelo em inglês como o primeiro parâmetro, e todos os outros modelos "
1173 "traduzidos depois disso. Isso irá mostrar estatísticas para cada um deles, "
1174 "Por exemplo :"
1175
1176 # type: verbatim
1177 #. type: verbatim
1178 #: ../../debconf-getlang:65
1179 #, no-wrap
1180 msgid ""
1181 " debconf-getlang --stats debian/templates debian/templates.*\n"
1182 "\n"
1183 msgstr ""
1184 " debconf-getlang --stats debian/templates debian/templates.*\n"
1185 "\n"
1186
1187 # type: =head1
1188 #. type: =head1
1189 #: ../../debconf-getlang:69
1190 msgid "NOTE"
1191 msgstr "NOTA"
1192
1193 # type: textblock
1194 #. type: textblock
1195 #: ../../debconf-getlang:71
1196 msgid ""
1197 "Note that the text in the generated templates may be word-wrapped by debconf."
1198 msgstr ""
1199 "Note que o texto nos modelos gerados podem ser \"word-wrapped\" pelo debconf."
1200
1201 # type: textblock
1202 #. type: textblock
1203 #: ../../debconf-getlang:76
1204 msgid "L<debconf-mergetemplate(1)>"
1205 msgstr "L<debconf-mergetemplate(1)>"
1206
1207 # type: textblock
1208 #. type: textblock
1209 #: ../../debconf-get-selections:5
1210 #, fuzzy
1211 msgid "debconf-get-selections - output contents of debconf database"
1212 msgstr ""
1213 "debconf-loadtemplate - carrega um arquido de modelo em uma base de dados "
1214 "debconf"
1215
1216 # type: textblock
1217 #. type: textblock
1218 #: ../../debconf-get-selections:9
1219 msgid "debconf-get-selections [--installer]"
1220 msgstr ""
1221
1222 # type: textblock
1223 #. type: textblock
1224 #: ../../debconf-get-selections:13
1225 msgid ""
1226 "Output the current debconf database in a format understandable by debconf-"
1227 "set-selections."
1228 msgstr ""
1229
1230 # type: textblock
1231 #. type: textblock
1232 #: ../../debconf-get-selections:16
1233 msgid ""
1234 "To dump the debconf database of the debian-installer, from /var/log/"
1235 "installer/cdebconf, use the --installer parameter."
1236 msgstr ""
1237
1238 # type: textblock
1239 #. type: textblock
1240 #: ../../debconf-get-selections:80 ../../debconf-set-selections:228
1241 msgid "Petter Reinholdtsen <[email protected]>"
1242 msgstr ""
1243
1244 # type: textblock
1245 #. type: textblock
1246 #: ../../debconf-loadtemplate:5
1247 msgid "debconf-loadtemplate - load template file into debconf database"
1248 msgstr ""
1249 "debconf-loadtemplate - carrega um arquido de modelo em uma base de dados "
1250 "debconf"
1251
1252 # type: verbatim
1253 #. type: verbatim
1254 #: ../../debconf-loadtemplate:16
1255 #, no-wrap
1256 msgid ""
1257 " debconf-loadtemplate owner file [file ..]\n"
1258 "\n"
1259 msgstr ""
1260 " debconf-loadtemplate dono arquivo [arquivo ..]\n"
1261 "\n"
1262
1263 # type: textblock
1264 #. type: textblock
1265 #: ../../debconf-loadtemplate:20
1266 #, fuzzy
1267 msgid ""
1268 "Loads one or more template files into the debconf database. The first "
1269 "parameter specifies the owner of the templates (typically, the owner is the "
1270 "name of a debian package). The remaining parameters are template files to "
1271 "load."
1272 msgstr ""
1273 "Carrega um ou mais arquivos de modelos em uma base de dados debconf. O "
1274 "primeiro parâmetro especifica o dono dos modelos (tipicamente, o dono é o "
1275 "nome de um pacote debian). Os parâmetros restantes são os arquivos de "
1276 "modelos a carregar."
1277
1278 # type: textblock
1279 #. type: textblock
1280 #: ../../debconf-loadtemplate:27
1281 msgid ""
1282 "This program should never be used from a maintainer script of a package that "
1283 "uses debconf! It may however, be useful in debugging, or to seed the debconf "
1284 "database."
1285 msgstr ""
1286 "Este programa não deverá nunca ser usado em um script de mantenedor de um "
1287 "pacote que usa debconf! Ele pode, porém, ser útil em depuração ou para "
1288 "alimentar a base de dados debconf."
1289
1290 # type: textblock
1291 #. type: textblock
1292 #: ../../debconf-loadtemplate:33
1293 msgid "L<debconf-communicate(1)>"
1294 msgstr "L<debconf-communicate(1)>"
1295
1296 # type: textblock
1297 #. type: textblock
1298 #: ../../debconf-mergetemplate:5
1299 msgid "debconf-mergetemplate - merge together multiple debconf template files"
1300 msgstr "debconf-mergetemplate - une múltiplos arquivos de modelos debconf"
1301
1302 # type: verbatim
1303 #. type: verbatim
1304 #: ../../debconf-mergetemplate:19
1305 #, fuzzy, no-wrap
1306 msgid ""
1307 " debconf-mergetemplate [options] [templates.ll ...] templates\n"
1308 "\n"
1309 msgstr ""
1310 " debconf-mergetemplate arquivo [arquivo ..]\n"
1311 "\n"
1312
1313 # type: textblock
1314 #. type: textblock
1315 #: ../../debconf-mergetemplate:23
1316 msgid ""
1317 "Note: This utility is deprecated. You should switch to using po-debconf's "
1318 "po2debconf program."
1319 msgstr ""
1320
1321 # type: textblock
1322 #. type: textblock
1323 #: ../../debconf-mergetemplate:26
1324 msgid ""
1325 "This program is useful if you have multiple debconf templates files which "
1326 "you want to merge together into one big file. All the specified files will "
1327 "be read in, merged, and output to standard output."
1328 msgstr ""
1329 "Este programa é útil se você possui múltiplos arquivos de modelos debconf os "
1330 "quais você quer unir em um único grande arquivo. Todos os arquivos "
1331 "especificados serão lidos, unidos, e o resultado será exibido na saída "
1332 "padrão."
1333
1334 # type: textblock
1335 #. type: textblock
1336 #: ../../debconf-mergetemplate:30
1337 msgid ""
1338 "This can be especially useful if you are dealing with translated template "
1339 "files. In this case, you might have your main template file, plus several "
1340 "other files provided by the translators. These files will have translated "
1341 "fields in them, and maybe the translators left in the english versions of "
1342 "the fields they translated, for their reference."
1343 msgstr ""
1344 "Isto pode ser especialmente útil se você está lidando com arquivos de "
1345 "modelos traduzidos. Neste caso, você poderá ter seu arquivo de modelo "
1346 "principal, mais diversos outros arquivos fornecidos pelos tradutores. Estes "
1347 "arquivos terão campos traduzidos, e talvez os tradutores deixem as versões "
1348 "em inglês que eles traduziram, para sua própria referência."
1349
1350 # type: textblock
1351 #. type: textblock
1352 #: ../../debconf-mergetemplate:36
1353 #, fuzzy
1354 msgid ""
1355 "So, you want to merge together all the translated templates files with your "
1356 "main templates file. Any fields that are unique to the translated files need "
1357 "to be added in to the correct templates, but any fields they have in common "
1358 "should be superseded by the fields in the main file (which might be more up-"
1359 "to-date)."
1360 msgstr ""
1361 "Portanto, você quer unir todos os arquivos de modelos traduzidos com seu "
1362 "arquivo de modelo principal. Quaisquer campos que sejam únicos para os "
1363 "arquivos traduzidos precisam ser adicionados nos modelos corretos, mas "
1364 "quaisquer campos que eles possuam em comum deverão ser supercedidos pelos "
1365 "campos no arquivo principal (o qual deve estar mais atualizado)."
1366
1367 # type: textblock
1368 #. type: textblock
1369 #: ../../debconf-mergetemplate:42
1370 msgid ""
1371 "This program handles that case properly, just list each of the translated "
1372 "templates files, and then your main templates file last."
1373 msgstr ""
1374 "Este programa gerencia este caso apropriadamente, somente liste cada um dos "
1375 "arquivos de modelos traduzidos, e então seu arquivo de modelos principal por "
1376 "último."
1377
1378 # type: =item
1379 #. type: =item
1380 #: ../../debconf-mergetemplate:49
1381 msgid "--outdated"
1382 msgstr ""
1383
1384 # type: textblock
1385 #. type: textblock
1386 #: ../../debconf-mergetemplate:51
1387 msgid ""
1388 "Merge in even outdated translations. The default is to drop them with a "
1389 "warning message."
1390 msgstr ""
1391
1392 # type: =item
1393 #. type: =item
1394 #: ../../debconf-mergetemplate:54
1395 msgid "--drop-old-templates"
1396 msgstr ""
1397
1398 # type: textblock
1399 #. type: textblock
1400 #: ../../debconf-mergetemplate:56
1401 msgid ""
1402 "If a translation has an entire template that is not in the master file (and "
1403 "thus is probably an old template), drop that entire template."
1404 msgstr ""
1405
1406 # type: textblock
1407 #. type: textblock
1408 #: ../../debconf-mergetemplate:63
1409 msgid "L<debconf-getlang(1)>"
1410 msgstr "L<debconf-getlang(1)>"
1411
1412 # type: textblock
1413 #. type: textblock
1414 #: ../../debconf-set-selections:5
1415 #, fuzzy
1416 msgid "debconf-set-selections - insert new values into the debconf database"
1417 msgstr ""
1418 "debconf-loadtemplate - carrega um arquido de modelo em uma base de dados "
1419 "debconf"
1420
1421 # type: verbatim
1422 #. type: verbatim
1423 #: ../../debconf-set-selections:9
1424 #, no-wrap
1425 msgid ""
1426 " debconf-set-selections file\n"
1427 " debconf-get-selections | ssh newhost debconf-set-selections\n"
1428 "\n"
1429 msgstr ""
1430
1431 # type: textblock
1432 #. type: textblock
1433 #: ../../debconf-set-selections:14
1434 msgid ""
1435 "B<debconf-set-selections> can be used to pre-seed the debconf database with "
1436 "answers, or to change answers in the database. Each question will be marked "
1437 "as seen to prevent debconf from asking the question interactively."
1438 msgstr ""
1439
1440 # type: textblock
1441 #. type: textblock
1442 #: ../../debconf-set-selections:18
1443 msgid "Reads from a file if a filename is given, otherwise from stdin."
1444 msgstr ""
1445
1446 # type: textblock
1447 #. type: textblock
1448 #: ../../debconf-set-selections:22
1449 msgid ""
1450 "Only use this command to seed debconf values for packages that will be or "
1451 "are installed. Otherwise you can end up with values in the database for "
1452 "uninstalled packages that will not go away, or with worse problems involving "
1453 "shared values. It is recommended that this only be used to seed the database "
1454 "if the originating machine has an identical install."
1455 msgstr ""
1456
1457 # type: SH
1458 #. type: =head1
1459 #: ../../debconf-set-selections:28
1460 #, fuzzy
1461 msgid "DATA FORMAT"
1462 msgstr "FORMATOS"
1463
1464 # type: textblock
1465 #. type: textblock
1466 #: ../../debconf-set-selections:30
1467 msgid ""
1468 "The data is a series of lines. Lines beginning with a # character are "
1469 "comments. Blank lines are ignored. All other lines set the value of one "
1470 "question, and should contain four values, each separated by one character of "
1471 "whitespace. The first value is the name of the package that owns the "
1472 "question. The second is the name of the question, the third value is the "
1473 "type of this question, and the fourth value (through the end of the line) "
1474 "is the value to use for the answer of the question."
1475 msgstr ""
1476
1477 # type: textblock
1478 #. type: textblock
1479 #: ../../debconf-set-selections:38
1480 msgid ""
1481 "Alternatively, the third value can be \"seen\"; then the preseed line only "
1482 "controls whether the question is marked as seen in debconf's database. Note "
1483 "that preseeding a question's value defaults to marking that question as "
1484 "seen, so to override the default value without marking a question seen, you "
1485 "need two lines."
1486 msgstr ""
1487
1488 # type: textblock
1489 #. type: textblock
1490 #: ../../debconf-set-selections:44
1491 msgid ""
1492 "Lines can be continued to the next line by ending them with a \"\\\" "
1493 "character."
1494 msgstr ""
1495
1496 # type: verbatim
1497 #. type: verbatim
1498 #: ../../debconf-set-selections:49
1499 #, no-wrap
1500 msgid ""
1501 " # Force debconf priority to critical.\n"
1502 " debconf debconf/priority select critical\n"
1503 "\n"
1504 msgstr ""
1505
1506 # type: verbatim
1507 #. type: verbatim
1508 #: ../../debconf-set-selections:52
1509 #, no-wrap
1510 msgid ""
1511 " # Override default frontend to readline, but allow user to select.\n"
1512 " debconf debconf/frontend select readline\n"
1513 " debconf debconf/frontend seen false\n"
1514 "\n"
1515 msgstr ""
1516
1517 # type: =item
1518 #. type: =item
1519 #: ../../debconf-set-selections:60
1520 msgid "B<--verbose>, B<-v>"
1521 msgstr ""
1522
1523 # type: textblock
1524 #. type: textblock
1525 #: ../../debconf-set-selections:62
1526 msgid "verbose output"
1527 msgstr ""
1528
1529 # type: =item
1530 #. type: =item
1531 #: ../../debconf-set-selections:64
1532 msgid "B<--checkonly>, B<-c>"
1533 msgstr ""
1534
1535 # type: textblock
1536 #. type: textblock
1537 #: ../../debconf-set-selections:66
1538 msgid "only check the input file format, do not save changes to database"
1539 msgstr ""
1540
1541 # type: textblock
1542 #. type: textblock
1543 #: ../../debconf-set-selections:72
1544 msgid "L<debconf-get-selections(1)> (available in the debconf-utils package)"
1545 msgstr ""
1546
1547 # type: textblock
1548 #. type: textblock
1549 #: ../../debconf-show:5
1550 #, fuzzy
1551 msgid "debconf-show - query the debconf database"
1552 msgstr "debconf-copydb - copia uma base de dados debconf"
1553
1554 # type: verbatim
1555 #. type: verbatim
1556 #: ../../debconf-show:9
1557 #, no-wrap
1558 msgid ""
1559 " debconf-show packagename [...] [--db=dbname]\n"
1560 " debconf-show --listowners [--db=dbname]\n"
1561 " debconf-show --listdbs\n"
1562 "\n"
1563 msgstr ""
1564
1565 # type: textblock
1566 #. type: textblock
1567 #: ../../debconf-show:15
1568 msgid "B<debconf-show> lets you query the debconf database in different ways."
1569 msgstr ""
1570
1571 # type: textblock
1572 #. type: textblock
1573 #: ../../debconf-show:17
1574 #, fuzzy
1575 msgid ""
1576 "The most common use is \"debconf-show packagename\", which displays all "
1577 "items in the debconf database owned by a given package, and their current "
1578 "values. Questions that have been asked already are prefixed with an '*'."
1579 msgstr ""
1580 "B<debconf-show> exibe todos os itens na base de dados debconf de propriedade "
1581 "de um determinado pacote e seus valores atuais. Itens que foram mostrados "
1582 "são pré-fixados com um '*'."
1583
1584 # type: textblock
1585 #. type: textblock
1586 #: ../../debconf-show:21
1587 msgid ""
1588 "This can be useful as a debugging aid, and especially handy in bug reports "
1589 "involving a package's use of debconf."
1590 msgstr ""
1591 "Isto pode ser útil como uma ajuda a depuração, e especialmente útil em "
1592 "relatórios de bug envolvendo o uso do debconf de um pacote."
1593
1594 # type: =item
1595 #. type: =item
1596 #: ../../debconf-show:28
1597 msgid "B<--db=>I<dbname>"
1598 msgstr ""
1599
1600 # type: textblock
1601 #. type: textblock
1602 #: ../../debconf-show:30
1603 msgid ""
1604 "Specify the database to query. By default, debconf-show queries the main "
1605 "database."
1606 msgstr ""
1607
1608 # type: =item
1609 #. type: =item
1610 #: ../../debconf-show:33
1611 msgid "B<--listowners>"
1612 msgstr ""
1613
1614 # type: textblock
1615 #. type: textblock
1616 #: ../../debconf-show:35
1617 msgid ""
1618 "Lists all owners of questions in the database. Generally an owner is "
1619 "equivalent to a debian package name."
1620 msgstr ""
1621
1622 # type: =item
1623 #. type: =item
1624 #: ../../debconf-show:38
1625 #, fuzzy
1626 msgid "B<--listdbs>"
1627 msgstr "B<--all>"
1628
1629 # type: textblock
1630 #. type: textblock
1631 #: ../../debconf-show:40
1632 msgid "Lists all available databases."
1633 msgstr ""
1634
1635 # type: Plain text
1636 #. type: textblock
1637 #: ../../debconf-show:154
1638 #, fuzzy
1639 msgid "Joey Hess <[email protected]> and Sylvain Ferriol"
1640 msgstr "Joey Hess E<lt>[email protected]<gt>"
1641
1642 # type: textblock
1643 #. type: textblock
1644 #: ../../dpkg-preconfigure:5
1645 msgid ""
1646 "dpkg-preconfigure - let packages ask questions prior to their installation"
1647 msgstr ""
1648 "dpkg-preconfigure - permite pacotes façam suas perguntas antes de sua "
1649 "instalação"
1650
1651 # type: verbatim
1652 #. type: verbatim
1653 #: ../../dpkg-preconfigure:9
1654 #, no-wrap
1655 msgid ""
1656 " dpkg-preconfigure [options] package.deb\n"
1657 "\n"
1658 msgstr ""
1659 " dpkg-preconfigure [opções] pacote.deb\n"
1660 "\n"
1661
1662 # type: verbatim
1663 #. type: verbatim
1664 #: ../../dpkg-preconfigure:11
1665 #, no-wrap
1666 msgid ""
1667 " dpkg-preconfigure --apt\n"
1668 "\n"
1669 msgstr ""
1670 " dpkg-preconfigure --apt\n"
1671 "\n"
1672
1673 # type: textblock
1674 #. type: textblock
1675 #: ../../dpkg-preconfigure:15
1676 msgid ""
1677 "B<dpkg-preconfigure> lets packages ask questions before they are installed. "
1678 "It operates on a set of debian packages, and all packages that use debconf "
1679 "will have their config script run so they can examine the system and ask "
1680 "questions."
1681 msgstr ""
1682 "B<dpkg-preconfigure> permite que pacotes façam suas perguntas antes que os "
1683 "mesmos sejam instalados. Opera em um conjunto de pacotes debian, e todos os "
1684 "pacotes que usam debconf terão seus script de configuração assim os mesmos "
1685 "podem examinar o sistema e fazer perguntas."
1686
1687 # type: textblock
1688 #. type: textblock
1689 #: ../../dpkg-preconfigure:30
1690 msgid ""
1691 "Set the lowest priority of questions you are interested in. Any questions "
1692 "with a priority below the selected priority will be ignored and their "
1693 "default answers will be used."
1694 msgstr ""
1695 "Define a prioridade mais baixa de questões nas quais você está interessado. "
1696 "Quaisquer questões com uma prioridade menor do que a prioridade selecionada "
1697 "será ignorda e suas respostas padrão serão usadas."
1698
1699 # type: =item
1700 #. type: =item
1701 #: ../../dpkg-preconfigure:38
1702 msgid "B<--apt>"
1703 msgstr "B<--apt>"
1704
1705 # type: textblock
1706 #. type: textblock
1707 #: ../../dpkg-preconfigure:40
1708 msgid ""
1709 "Run in apt mode. It will expect to read a set of package filenames from "
1710 "stdin, rather than getting them as parameters. Typically this is used to "
1711 "make apt run dpkg-preconfigure on all packages before they are installed. "
1712 "To do this, add something like this to /etc/apt/apt.conf:"
1713 msgstr ""
1714 "Executa no modo apt. Esperará ler um conjunto de nomes de arquivos de "
1715 "pacotes a partir d entrada padrão (stdin) ao invés de obtê-los como "
1716 "parâmetros. Tipicamente isto é usado para fazer o apt executar dpkg-"
1717 "preconfigure em todos os pacotes antes que sejam instalados. Para fazer "
1718 "isso, adicione algo como isso ao /etc/apt/apt.conf :"
1719
1720 # type: verbatim
1721 #. type: verbatim
1722 #: ../../dpkg-preconfigure:45
1723 #, no-wrap
1724 msgid ""
1725 " // Pre-configure all packages before\n"
1726 " // they are installed.\n"
1727 " DPkg::Pre-Install-Pkgs {\n"
1728 " \t\"dpkg-preconfigure --apt --priority=low\";\n"
1729 " };\n"
1730 "\n"
1731 msgstr ""
1732 " // Préconfigure todos os pacotes antes\n"
1733 " // que eles sejam instalados.\n"
1734 " DPkg::Pre-Install-Pkgs {\n"
1735 " \t\"dpkg-preconfigure --apt --priority=low\";\n"
1736 " };\n"
1737 "\n"
1738
1739 # type: =item
1740 #. type: =item
1741 #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69
1742 msgid "B<-h>, B<--help>"
1743 msgstr "B<-h>, B<--help>"
1744
1745 # type: textblock
1746 #. type: textblock
1747 #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71
1748 msgid "Display usage help."
1749 msgstr "Exibe ajuda sobre o uso."
1750
1751 # type: textblock
1752 #. type: textblock
1753 #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79
1754 #, fuzzy
1755 msgid "L<debconf(7)>"
1756 msgstr "L<debconf(8)>"
1757
1758 # type: textblock
1759 #. type: textblock
1760 #: ../../dpkg-reconfigure:5
1761 msgid "dpkg-reconfigure - reconfigure an already installed package"
1762 msgstr "dpkg-reconfigure - reconfigura um pacote já instalado"
1763
1764 # type: verbatim
1765 #. type: verbatim
1766 #: ../../dpkg-reconfigure:9
1767 #, no-wrap
1768 msgid ""
1769 " dpkg-reconfigure [options] packages\n"
1770 "\n"
1771 msgstr ""
1772 " dpkg-reconfigure [opções] pacotes\n"
1773 "\n"
1774
1775 # type: textblock
1776 #. type: textblock
1777 #: ../../dpkg-reconfigure:13
1778 #, fuzzy
1779 msgid ""
1780 "B<dpkg-reconfigure> reconfigures packages after they have already been "
1781 "installed. Pass it the names of a package or packages to reconfigure. It "
1782 "will ask configuration questions, much like when the package was first "
1783 "installed."
1784 msgstr ""
1785 "B<dpkg-reconfigure> reconfigura pacotes depois que eles já tenham sido "
1786 "instalados. Passe a ele o nome do pacote ou pacotes para reconfigurar."
1787
1788 # type: textblock
1789 #. type: textblock
1790 #: ../../dpkg-reconfigure:18
1791 msgid ""
1792 "If you just want to see the current configuration of a package, see "
1793 "L<debconf-show(1)> instead."
1794 msgstr ""
1795
1796 # type: textblock
1797 #. type: textblock
1798 #: ../../dpkg-reconfigure:27
1799 msgid ""
1800 "Select the frontend to use. The default frontend can be permanently changed "
1801 "by:"
1802 msgstr ""
1803 "Seleciona o frontend a usar. O frontend padrão pode ser permanentemente "
1804 "mudado por :"
1805
1806 # type: verbatim
1807 #. type: verbatim
1808 #: ../../dpkg-reconfigure:30
1809 #, no-wrap
1810 msgid ""
1811 " dpkg-reconfigure debconf\n"
1812 "\n"
1813 msgstr ""
1814 " dpkg-reconfigure debconf\n"
1815 "\n"
1816
1817 # type: textblock
1818 #. type: textblock
1819 #: ../../dpkg-reconfigure:32
1820 msgid ""
1821 "Note that if you normally have debconf set to use the noninteractive "
1822 "frontend, dpkg-reconfigure will use the dialog frontend instead, so you "
1823 "actually get to reconfigure the package."
1824 msgstr ""
1825 "Note que se você normalmente têm o debconf configurado para usar o frontend "
1826 "não-interativa, dpkg-reconfigure usará o frontend dialog, assim você poderá "
1827 "reconfigurar o pacote."
1828
1829 # type: textblock
1830 #. type: textblock
1831 #: ../../dpkg-reconfigure:38
1832 #, fuzzy
1833 msgid ""
1834 "Specify the minimum priority of question that will be displayed. dpkg-"
1835 "reconfigure normally shows low priority questions no matter what your "
1836 "default priority is. See L<debconf(7)> for a list."
1837 msgstr ""
1838 "Especifica a prioridade mínima de questões que serão exibidas. dpkg-"
1839 "reconfigure normalmente exibe questões de baixa prioridade não importando "
1840 "qual sua prioridade padrão seja."
1841
1842 # type: TP
1843 #. type: =item
1844 #: ../../dpkg-reconfigure:46
1845 #, fuzzy
1846 msgid "B<--default-priority>"
1847 msgstr "B<Priority>"
1848
1849 # type: textblock
1850 #. type: textblock
1851 #: ../../dpkg-reconfigure:48
1852 msgid ""
1853 "Use whatever the default priority of question is, instead of forcing the "
1854 "priority to low."
1855 msgstr ""
1856
1857 # type: =item
1858 #. type: =item
1859 #: ../../dpkg-reconfigure:51
1860 msgid "B<-u>, B<--unseen-only>"
1861 msgstr "B<-u>, B<--unseen-only>"
1862
1863 # type: textblock
1864 #. type: textblock
1865 #: ../../dpkg-reconfigure:53
1866 msgid ""
1867 "By default, all questions are shown, even if they have already been "
1868 "answered. If this parameter is set though, only questions that have not yet "
1869 "been seen will be asked."
1870 msgstr ""
1871 "Por padrão, todas as questões são exibidas, mesmo se elas já foram "
1872 "respondidas. Porém, caso este parâmetro esteja definido, somente questões "
1873 "que não tenham sido vistas serão perguntadas."
1874
1875 # type: =item
1876 #. type: =item
1877 #: ../../dpkg-reconfigure:57
1878 msgid "B<--force>"
1879 msgstr ""
1880
1881 # type: textblock
1882 #. type: textblock
1883 #: ../../dpkg-reconfigure:59
1884 msgid ""
1885 "Force dpkg-reconfigure to reconfigure a package even if the package is in an "
1886 "inconsistent or broken state. Use with caution."
1887 msgstr ""
1888
1889 # type: =item
1890 #. type: =item
1891 #: ../../dpkg-reconfigure:62
1892 msgid "B<--no-reload>"
1893 msgstr ""
1894
1895 # type: textblock
1896 #. type: textblock
1897 #: ../../dpkg-reconfigure:64
1898 msgid ""
1899 "Prevent dpkg-reconfigure from reloading templates. Use with caution; this "
1900 "will prevent dpkg-reconfigure from repairing broken templates databases. "
1901 "However, it may be useful in constrained environments where rewriting the "
1902 "templates database is expensive."
1903 msgstr ""
1904
1905 # type: TH
1906 #. type: TH
1907 #: debconf.conf.5:1
1908 #, no-wrap
1909 msgid "DEBCONF.CONF"
1910 msgstr "DEBCONF.CONF"
1911
1912 # type: Plain text
1913 #. type: Plain text
1914 #: debconf.conf.5:4
1915 msgid "debconf.conf - debconf configuration file"
1916 msgstr "debconf.conf - arquivo de configuração"
1917
1918 # type: Plain text
1919 #. type: Plain text
1920 #: debconf.conf.5:12
1921 msgid ""
1922 "Debconf is a configuration system for Debian packages. /etc/debconf.conf and "
1923 "~/.debconfrc are configuration files debconf uses to determine which "
1924 "databases it should use. These databases are used for storing two types of "
1925 "information; dynamic config data the user enters into it, and static "
1926 "template data. Debconf offers a flexible, extensible database backend. New "
1927 "drivers can be created with a minimum of effort, and sets of drivers can be "
1928 "combined in various ways."
1929 msgstr ""
1930 "Debconf é um sistema de configuração de pacotes Debian. /etc/debconf.conf e "
1931 "~/.debconfrc são arquivos de configuração que o debconf usa para determinar "
1932 "quais base de dados deve usar. Estas base de dados são usadas para armazenar "
1933 "dois tipos de informação; dados de configuração dinâmicos que o usuários "
1934 "insere na base e dados de modelos (templates) estáticos. O Debconf oferece "
1935 "um backend de base de dados flexível e extensível. Novos controladores podem "
1936 "ser criados com um mínimo de esforço e conjuntos de controladores podem ser "
1937 "combinados de diversas formas."
1938
1939 # type: Plain text
1940 #. type: Plain text
1941 #: debconf.conf.5:17
1942 #, no-wrap
1943 msgid ""
1944 " # This is a sample config file that is\n"
1945 " # sufficient to use debconf.\n"
1946 " Config: configdb\n"
1947 " Templates: templatedb\n"
1948 msgstr ""
1949 "\t# Este é um arquivo de configuração de exemplo que é\n"
1950 "\t# suficiente para usar o debconf.\n"
1951 " Config: configdb\n"
1952 " Templates: templatedb\n"
1953
1954 # type: Plain text
1955 #. type: Plain text
1956 #: debconf.conf.5:21
1957 #, no-wrap
1958 msgid ""
1959 " Name: configdb\n"
1960 " Driver: File\n"
1961 " Filename: /var/cache/debconf/config.dat\n"
1962 msgstr ""
1963 " Name: configdb\n"
1964 " Driver: File\n"
1965 " Filename: /var/cache/debconf/config.dat\n"
1966
1967 # type: Plain text
1968 #. type: Plain text
1969 #: debconf.conf.5:26
1970 #, no-wrap
1971 msgid ""
1972 " Name: templatedb\n"
1973 " Driver: File\n"
1974 " Mode: 644\n"
1975 " Filename: /var/cache/debconf/templates.dat\n"
1976 msgstr ""
1977 " Name: templatedb\n"
1978 " Driver: File\n"
1979 " Mode: 644\n"
1980 " Filename: /var/cache/debconf/templates.dat\n"
1981
1982 # type: SH
1983 #. type: SH
1984 #: debconf.conf.5:26
1985 #, no-wrap
1986 msgid "FILE FORMAT"
1987 msgstr "FORMATO DO ARQUIVO"
1988
1989 # type: Plain text
1990 #. type: Plain text
1991 #: debconf.conf.5:30
1992 msgid ""
1993 "The format of this file is a series of stanzas, each separated by at least "
1994 "one wholly blank line. Comment lines beginning with a \"#\" character are "
1995 "ignored."
1996 msgstr ""
1997 "O formato deste arquivo é uma série de estrofes, cada uma separada por pelo "
1998 "menos uma linha conpletamente em branco. Linhas de comentário iniciando com "
1999 "um caracter \"#\" são ignoradas."
2000
2001 # type: Plain text
2002 #. type: Plain text
2003 #: debconf.conf.5:33
2004 msgid ""
2005 "The first stanza of the file is special, is used to configure debconf as a "
2006 "whole. Two fields are required to be in this first stanza:"
2007 msgstr ""
2008 "A primeira estrofe do arquivos é especial, é usada para configurar o debconf "
2009 "como um todo. Dois campos são requeridos neste primeira estrofe :"
2010
2011 # type: TP
2012 #. type: TP
2013 #: debconf.conf.5:34
2014 #, no-wrap
2015 msgid "B<Config>"
2016 msgstr "B<Config>"
2017
2018 # type: Plain text
2019 #. type: Plain text
2020 #: debconf.conf.5:37
2021 msgid "Specifies the name of the database from which to load config data."
2022 msgstr ""
2023 "Especifica o nome da base de dados a partir da qual carregar dados de "
2024 "configuração."
2025
2026 # type: TP
2027 #. type: TP
2028 #: debconf.conf.5:37
2029 #, no-wrap
2030 msgid "B<Templates>"
2031 msgstr "B<Templates>"
2032
2033 # type: Plain text
2034 #. type: Plain text
2035 #: debconf.conf.5:40
2036 #, fuzzy
2037 msgid "Specifies the name of the database to use for the template cache."
2038 msgstr "Especifica o nome da base de dados a usar para o cache de modelos."
2039
2040 # type: Plain text
2041 #. type: Plain text
2042 #: debconf.conf.5:43
2043 msgid "Additional fields that can be used include:"
2044 msgstr "Arquivos adicionais que podem ser incluídos :"
2045
2046 # type: TP
2047 #. type: TP
2048 #: debconf.conf.5:44
2049 #, no-wrap
2050 msgid "B<Frontend>"
2051 msgstr "B<Frontend>"
2052
2053 # type: Plain text
2054 #. type: Plain text
2055 #: debconf.conf.5:48
2056 msgid ""
2057 "The frontend Debconf should use, overriding any frontend set in the debconf "
2058 "database."
2059 msgstr ""
2060 "O frontend que o Debconf deve usar, sobreescrevendo qualquer frontend "
2061 "definido na base de dados debconf."
2062
2063 # type: TP
2064 #. type: TP
2065 #: debconf.conf.5:48
2066 #, no-wrap
2067 msgid "B<Priority>"
2068 msgstr "B<Priority>"
2069
2070 # type: Plain text
2071 #. type: Plain text
2072 #: debconf.conf.5:52
2073 msgid ""
2074 "The priority Debconf should use, overriding any priority set in the debconf "
2075 "database."
2076 msgstr ""
2077 "A prioridade que o Debconf deve usar, sobreescrevendo qualquer prioridade "
2078 "definida na base de dados debconf."
2079
2080 # type: TP
2081 #. type: TP
2082 #: debconf.conf.5:52
2083 #, no-wrap
2084 msgid "B<Admin-Email>"
2085 msgstr "B<Admin-Email>"
2086
2087 # type: Plain text
2088 #. type: Plain text
2089 #: debconf.conf.5:59
2090 #, fuzzy
2091 msgid ""
2092 "The email address Debconf should send mail to if it needs to make sure that "
2093 "the admin has seen an important message. Defaults to \"root\", but can be "
2094 "set to any valid email address to send the mail there. If you prefer to "
2095 "never have debconf send you mail, specify a blank address. This can be "
2096 "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable."
2097 msgstr ""
2098 "O endereço de e-mail para o qual o Debconf deve enviar mensagens caso "
2099 "precise certificar-se que o adminstrador tenha visto uma nota importante. O "
2100 "padrão é \"root\", mas pode ser definido para qualquer endereço de e-mail "
2101 "válido para o qual a mensagem possa ser enviada. Caso você prefira que o "
2102 "debconf nunca envie e-mail para você, especifique um endereço em branco. "
2103 "Isto pode ser sobreescrito em tempo de execucação com a variável de ambiente "
2104 "DEBCONF_ADMIN_EMAIL."
2105
2106 # type: Plain text
2107 #. type: Plain text
2108 #: debconf.conf.5:59 debconf.conf.5:395
2109 #, no-wrap
2110 msgid "B<Debug>"
2111 msgstr "B<Debug>"
2112
2113 # type: Plain text
2114 #. type: Plain text
2115 #: debconf.conf.5:67
2116 msgid ""
2117 "If set, this will cause debconf to output debugging information to standard "
2118 "error. The value it is set to can be something like \"user\", \"developer\", "
2119 "\"db\", or a regular expression. Typically, rather than setting it "
2120 "permanently in a config file, you will only want to temporarily turn on "
2121 "debugging, and the DEBCONF_DEBUG environment variable can be set instead to "
2122 "accomplish that."
2123 msgstr ""
2124 "Caso definido, fará com que o debconf envia a saída de informação de "
2125 "depuração para a saída de erros padrão. O valor que pode ser configurado é "
2126 "algo como \"user\", \"developer\", \"db\" ou uma expressão regular. "
2127 "Tipicamente, ao invés de definir este valor permanentemente em um arquivo de "
2128 "configuração você desejará habilitar a depuração somente temporariamente e a "
2129 "variável de ambiente DEBCONF_DEBUG pode ser definida para cumprir exatamente "
2130 "isso."
2131
2132 # type: TP
2133 #. type: TP
2134 #: debconf.conf.5:67
2135 #, fuzzy, no-wrap
2136 msgid "B<NoWarnings>"
2137 msgstr "B<Config>"
2138
2139 # type: Plain text
2140 #. type: Plain text
2141 #: debconf.conf.5:72
2142 msgid ""
2143 "If set, this will make debconf not display warnings about various things. "
2144 "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment "
2145 "variable."
2146 msgstr ""
2147
2148 # type: TP
2149 #. type: TP
2150 #: debconf.conf.5:72
2151 #, no-wrap
2152 msgid "B<Log>"
2153 msgstr "B<Log>"
2154
2155 # type: Plain text
2156 #. type: Plain text
2157 #: debconf.conf.5:77
2158 msgid ""
2159 "Makes debconf log debugging information as it runs, to the syslog. The value "
2160 "it is set to controls that is logged. See Debug, above for an explanation of "
2161 "the values that can be set to control what is logged."
2162 msgstr ""
2163 "Faz com que o debconf grave informação de depuração para o syslog quando ele "
2164 "é executado. O valor para o qual é definido controla o que é logado. Veja "
2165 "Debug acima para uma explicação dos valores que podem ser definidos para "
2166 "controlar o que é logado."
2167
2168 # type: TP
2169 #. type: TP
2170 #: debconf.conf.5:77
2171 #, no-wrap
2172 msgid "B<Terse>"
2173 msgstr "B<Terse>"
2174
2175 # type: Plain text
2176 #. type: Plain text
2177 #: debconf.conf.5:82
2178 msgid ""
2179 "If set to \"true\", makes some debconf frontends use a special terse display "
2180 "mode that outputs as little as possible. Defaults to false. Terse mode may "
2181 "be temporarily set via the DEBCONF_TERSE environment variable."
2182 msgstr ""
2183 "Caso definido pata \"true\", faz com que alguns frontends debconf usem um "
2184 "modo de display especial resumido o qual envia como saída o mínimo possível. "
2185 "O padrão é falso. O modo resumido pode ser temporariamente definido através "
2186 "da variável de ambiente DEBCONF_TERSE."
2187
2188 # type: Plain text
2189 #. type: Plain text
2190 #: debconf.conf.5:87
2191 #, no-wrap
2192 msgid ""
2193 "For example, the first stanza of a file might look like this:\n"
2194 " Config: configdb\n"
2195 " Templates: templatedb\n"
2196 msgstr ""
2197 "Por exemplo, a primeira estrofe de um arquivo poderia se parecer com :\n"
2198 " Config: configdb\n"
2199 " Templates: templatedb\n"
2200
2201 # type: Plain text
2202 #. type: Plain text
2203 #: debconf.conf.5:91
2204 #, no-wrap
2205 msgid ""
2206 "Each remaining stanza in the file sets up a database. A database stanza\n"
2207 "begins by naming the database:\n"
2208 " Name: configdb\n"
2209 msgstr ""
2210 "Cada estrofe restante no arquivo configura uma base de dados. Uma estrofe\n"
2211 "base de dados inicia pela nomeação da base de dados :\n"
2212 " Name: configdb\n"
2213
2214 # type: Plain text
2215 #. type: Plain text
2216 #: debconf.conf.5:95
2217 #, no-wrap
2218 msgid ""
2219 "Then it indicates what database driver should be used for this database.\n"
2220 "See DRIVERS, below, for information about what drivers are available.\n"
2221 " Driver: File\n"
2222 msgstr ""
2223 "Então indica qual controlador de base de dados deverá ser usado para esta\n"
2224 "base de dados. Veja CONTROLADORES, abaixo, para informações sobre quais\n"
2225 "controladores estão disponíveis.\n"
2226 " Driver: File\n"
2227
2228 # type: Plain text
2229 #. type: Plain text
2230 #: debconf.conf.5:100
2231 #, no-wrap
2232 msgid ""
2233 "You can indicate that the database is not essential to the proper\n"
2234 "functioning of debconf by saying it is not required. This will make debconf\n"
2235 "muddle on if the database fails for some reason.\n"
2236 " Required: false\n"
2237 msgstr ""
2238 "Você pode indicar que a base de dados não é essencial para o funcionamento\n"
2239 "correto do debconf dizendo que a mesma não é requerida. Isto fará com que\n"
2240 "o debconf se ajeite de alguma maneira caso a base de dados falhe por\n"
2241 "alguma razão.\n"
2242 " Required: false\n"
2243
2244 # type: Plain text
2245 #. type: Plain text
2246 #: debconf.conf.5:104
2247 #, no-wrap
2248 msgid ""
2249 "You can mark any database as readonly and debconf will not write anything\n"
2250 "to it.\n"
2251 " Readonly: true\n"
2252 msgstr ""
2253 "Você pode marcar qualquer base de dados como somente leitura e o debconf\n"
2254 "não gravará na mesma.\n"
2255 " Readonly: true\n"
2256
2257 # type: Plain text
2258 #. type: Plain text
2259 #: debconf.conf.5:107
2260 msgid ""
2261 "You can also limit what types of data can go into the database with Accept- "
2262 "and Reject- lines; see ACCESS CONTROLS, below."
2263 msgstr ""
2264 "Você pode também limitar quais tipos de dados podem ir para uma base de "
2265 "dados com linhas Accept- e Reject-; veja CONTROLES DE ACESSO, abaixo."
2266
2267 # type: Plain text
2268 #. type: Plain text
2269 #: debconf.conf.5:112
2270 #, no-wrap
2271 msgid ""
2272 "The remainder of each database stanza is used to provide configuration\n"
2273 "specific to that driver. For example, the Text driver needs to know\n"
2274 "a directory to put the database in, so you might say:\n"
2275 " Filename: /var/cache/debconf/config.dat\n"
2276 msgstr ""
2277 "O restante de cada estrofe da base de dados é usado para fornecer\n"
2278 "configuração específica para o controlador. Por exemplo, o controlador\n"
2279 "Text precisa saber o diretório onde colocar a base de dados, então você\n"
2280 "poderia dizer:\n"
2281 " Filename: /var/cache/debconf/config.dat\n"
2282
2283 # type: SH
2284 #. type: SH
2285 #: debconf.conf.5:112
2286 #, no-wrap
2287 msgid "DRIVERS"
2288 msgstr "CONTROLADORES"
2289
2290 # type: Plain text
2291 #. type: Plain text
2292 #: debconf.conf.5:119
2293 #, fuzzy
2294 msgid ""
2295 "A number of drivers are available, and more can be written with little "
2296 "difficulty. Drivers come in two general types. First there are real drivers "
2297 "-- drivers that actually access and store data in some kind of database, "
2298 "which might be on the local filesystem, or on a remote system. Then there "
2299 "are meta-drivers that combine other drivers together to form more "
2300 "interesting systems. Let's start with the former."
2301 msgstr ""
2302 "Diversos controladores estão disponíveis, e outros podem ser escritos com "
2303 "pouco esforço. Controladores existem em três tipos genéricos. Primeiro, "
2304 "existem controladores reais -- controladores que atualmente acessam e "
2305 "armazenam dados em algum tipo de base de dados, as quais podem estar no "
2306 "sistema de arquivos local ou em um sistema remoto. E então existem meta-"
2307 "controladores que combinam outros controladores juntos para formar sistemas "
2308 "mais interessantes. Vamos começar com o primeiro."
2309
2310 # type: TP
2311 #. type: TP
2312 #: debconf.conf.5:120
2313 #, no-wrap
2314 msgid "B<File>"
2315 msgstr "B<File>"
2316
2317 # type: Plain text
2318 #. type: Plain text
2319 #: debconf.conf.5:127
2320 #, fuzzy
2321 msgid ""
2322 "This database driver allows debconf to store a whole database in a single "
2323 "flat text file. This makes it easy to archive, transfer between machines, "
2324 "and edit. It is one of the more compact database formats in terms of disk "
2325 "space used. It is also one of the slowest."
2326 msgstr ""
2327 "Este controlador de base de dados permite ao debconf armazenar uma base de "
2328 "dados completa em um único arquivo texto comum. Isto faz com que seja fácil "
2329 "arquivar, transferir entre máquinás e editar. Este é um dos formatos de base "
2330 "de dados mais compactos em termos de espaço em disco utilizado."
2331
2332 # type: Plain text
2333 #. type: Plain text
2334 #: debconf.conf.5:130
2335 msgid ""
2336 "On the downside, the entire file has to be read in each time debconf starts "
2337 "up, and saving it is also slow."
2338 msgstr ""
2339 "Como ponto negativo, o arquivo inteiro precisa ser lido cada vez que o "
2340 "debconf inicia, e gravá-lo também é lento."
2341
2342 # type: Plain text
2343 #. type: Plain text
2344 #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309
2345 msgid "The following things are configurable for this driver."
2346 msgstr "As seguintes opções são coinfiguráveis para este controlador. p"
2347
2348 # type: TP
2349 #. type: TP
2350 #: debconf.conf.5:133
2351 #, no-wrap
2352 msgid "B<Filename>"
2353 msgstr "B<Filename>"
2354
2355 # type: Plain text
2356 #. type: Plain text
2357 #: debconf.conf.5:136
2358 msgid "The file to use as the database. This is a required field."
2359 msgstr "O arquivo a usar como base de dados. Este é um campo requerido."
2360
2361 # type: TP
2362 #. type: TP
2363 #: debconf.conf.5:136 debconf.conf.5:203
2364 #, no-wrap
2365 msgid "B<Mode>"
2366 msgstr "B<Mode>"
2367
2368 # type: Plain text
2369 #. type: Plain text
2370 #: debconf.conf.5:140
2371 msgid ""
2372 "The permissions to create the file with if it does not exist. Defaults to "
2373 "600, since the file could contain passwords in some circumstances."
2374 msgstr ""
2375 "As permissões com as quais criar o arquivo caso ele não exista. O padrão é "
2376 "600, uma vez que o arquivo pode conter senhas em algumas circunstâncias."
2377
2378 # type: TP
2379 #. type: TP
2380 #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310
2381 #, no-wrap
2382 msgid "B<Format>"
2383 msgstr "B<Format>"
2384
2385 # type: Plain text
2386 #. type: Plain text
2387 #: debconf.conf.5:144 debconf.conf.5:180
2388 msgid ""
2389 "The format of the file. See FORMATS below. Defaults to using a rfc-822 like "
2390 "format."
2391 msgstr ""
2392 "O formato do arquivo. Veja FORMATOS abaixo. O padrão é usar um arquivo como "
2393 "no formato rfc-822."
2394
2395 # type: Plain text
2396 #. type: Plain text
2397 #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371
2398 #, no-wrap
2399 msgid "B<Backup>"
2400 msgstr "B<Backup>"
2401
2402 # type: Plain text
2403 #. type: Plain text
2404 #: debconf.conf.5:148 debconf.conf.5:184
2405 msgid ""
2406 "Whether a backup should be made of the old file before changing it. "
2407 "Defaults to true."
2408 msgstr ""
2409 "Se um backup do arquivo antigo deverá ser feito antes de mudá-lo. O padrão é "
2410 "true (verdadeiro)."
2411
2412 # type: Plain text
2413 #. type: Plain text
2414 #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209
2415 msgid "As example stanza setting up a database using this driver:"
2416 msgstr ""
2417 "Um exemplo de estrofe configurando uma base de dados usando este "
2418 "controlador :"
2419
2420 # type: Plain text
2421 #. type: Plain text
2422 #: debconf.conf.5:155
2423 #, no-wrap
2424 msgid ""
2425 " Name: mydb\n"
2426 " Driver: File\n"
2427 " Filename: /var/cache/debconf/mydb.dat\n"
2428 msgstr ""
2429 " Name: mydb\n"
2430 " Driver: File\n"
2431 " Filename: /var/cache/debconf/mydb.dat\n"
2432
2433 # type: TP
2434 #. type: TP
2435 #: debconf.conf.5:156
2436 #, no-wrap
2437 msgid "B<DirTree>"
2438 msgstr "B<DirTree>"
2439
2440 # type: Plain text
2441 #. type: Plain text
2442 #: debconf.conf.5:166
2443 msgid ""
2444 "This database driver allows debconf to store data in a hierarchical "
2445 "directory structure. The names of the various debconf templates and "
2446 "questions are used as-is to form directories with files in them. This format "
2447 "for the database is the easiest to browse and fiddle with by hand. It has "
2448 "very good load and save speeds. It also typically occupies the most space, "
2449 "since a lot of small files and subdirectories do take up some additional "
2450 "room."
2451 msgstr ""
2452 "Este controlador de base de dados permite ao debconf armazenar dados em uma "
2453 "hierarquia de estrutura de diretórios. Os nomes dos vários modelos e "
2454 "questões debconf são usados como estão para formar diretórios com arquivos "
2455 "em seu interior. Este formato para a base de dados é o mais fácil de navegar "
2456 "e de se estudar manualmente. Possui velocidades de carregamento e gravação "
2457 "muito boas. Também ocupa tipicamente o maior espaço, uma vez que uma oprção "
2458 "de pequenos arquivos e subdiretórios ocupam espaço adicional."
2459
2460 # type: TP
2461 #. type: TP
2462 #: debconf.conf.5:169
2463 #, no-wrap
2464 msgid "B<Directory>"
2465 msgstr "B<Directory>"
2466
2467 # type: Plain text
2468 #. type: Plain text
2469 #: debconf.conf.5:172
2470 msgid "The directory to put the files in. Required."
2471 msgstr "O diretório no qual colocar os arquivos. Requerido."
2472
2473 # type: TP
2474 #. type: TP
2475 #: debconf.conf.5:172
2476 #, no-wrap
2477 msgid "B<Extension>"
2478 msgstr "B<Extension>"
2479
2480 # type: Plain text
2481 #. type: Plain text
2482 #: debconf.conf.5:176
2483 #, fuzzy
2484 msgid ""
2485 "An extension to add to the names of files. Must be set to a non-empty "
2486 "string; defaults to \".dat\""
2487 msgstr ""
2488 "Uma extensão com o qual prefixar os arquivos. Deve ser definida para uma "
2489 "string não vazia; o padrão é \".dat\""
2490
2491 # type: Plain text
2492 #. type: Plain text
2493 #: debconf.conf.5:192
2494 #, no-wrap
2495 msgid ""
2496 " Name: mydb\n"
2497 " Driver: DirTree\n"
2498 " Directory: /var/cache/debconf/mydb\n"
2499 " Extension: .txt\n"
2500 msgstr ""
2501 " Name: mydb\n"
2502 " Driver: DirTree\n"
2503 " Directory: /var/cache/debconf/mydb\n"
2504 " Extension: .txt\n"
2505
2506 # type: TP
2507 #. type: TP
2508 #: debconf.conf.5:193
2509 #, no-wrap
2510 msgid "B<PackageDir>"
2511 msgstr ""
2512
2513 # type: Plain text
2514 #. type: Plain text
2515 #: debconf.conf.5:200
2516 msgid ""
2517 "This database driver is a compromise between the File and DirTree databases. "
2518 "It uses a directory, in which there is (approximately) one file per package "
2519 "that uses debconf. This is fairly fast, while using little more room than "
2520 "the File database driver."
2521 msgstr ""
2522
2523 # type: Plain text
2524 #. type: Plain text
2525 #: debconf.conf.5:203
2526 msgid ""
2527 "This driver is configurable in the same ways as is the DirTree driver, plus:"
2528 msgstr ""
2529
2530 # type: Plain text
2531 #. type: Plain text
2532 #: debconf.conf.5:207
2533 #, fuzzy
2534 msgid ""
2535 "The permissions to create files with. Defaults to 600, since the files could "
2536 "contain passwords in some circumstances."
2537 msgstr ""
2538 "As permissões com as quais criar o arquivo caso ele não exista. O padrão é "
2539 "600, uma vez que o arquivo pode conter senhas em algumas circunstâncias."
2540
2541 # type: Plain text
2542 #. type: Plain text
2543 #: debconf.conf.5:213
2544 #, fuzzy, no-wrap
2545 msgid ""
2546 " Name: mydb\n"
2547 " Driver: PackageDir\n"
2548 " Directory: /var/cache/debconf/mydb\n"
2549 msgstr ""
2550 " Name: mydb\n"
2551 " Driver: DirTree\n"
2552 " Directory: /var/cache/debconf/mydb\n"
2553 " Extension: .txt\n"
2554
2555 # type: TP
2556 #. type: TP
2557 #: debconf.conf.5:214
2558 #, fuzzy, no-wrap
2559 msgid "B<LDAP>"
2560 msgstr "B<Db>"
2561
2562 # type: Plain text
2563 #. type: Plain text
2564 #: debconf.conf.5:218
2565 #, fuzzy
2566 msgid ""
2567 "WARNING: This database driver is currently experimental. Use with caution."
2568 msgstr ""
2569 "AVISO: O controlador stack ainda não é muito bem testado. Use por seu "
2570 "próprio risco."
2571
2572 #. type: Plain text
2573 #: debconf.conf.5:226
2574 msgid ""
2575 "This database driver accesses a LDAP directory for debconf configuration "
2576 "data. Due to the nature of the beast, LDAP directories should typically be "
2577 "accessed in read-only mode. This is because multiple accesses can take "
2578 "place, and it's generally better for data consistency if nobody tries to "
2579 "modify the data while this is happening. Of course, write access is "
2580 "supported for those cases where you do want to update the config data in the "
2581 "directory."
2582 msgstr ""
2583
2584 # type: Plain text
2585 #. type: Plain text
2586 #: debconf.conf.5:229
2587 msgid ""
2588 "For information about setting up a LDAP server for debconf, read /usr/share/"
2589 "doc/debconf-doc/README.LDAP (from the debconf-doc package)."
2590 msgstr ""
2591
2592 # type: Plain text
2593 #. type: Plain text
2594 #: debconf.conf.5:232
2595 msgid ""
2596 "To use this database driver, you must have the libnet-ldap-perl package "
2597 "installed. Debconf suggests that package, but does not depend on it."
2598 msgstr ""
2599
2600 # type: Plain text
2601 #. type: Plain text
2602 #: debconf.conf.5:236
2603 msgid ""
2604 "Please carefully consider the security implications of using a remote "
2605 "debconf database. Unless you trust the source, and you trust the intervening "
2606 "network, it is not a very safe thing to do."
2607 msgstr ""
2608
2609 # type: TP
2610 #. type: TP
2611 #: debconf.conf.5:239
2612 #, fuzzy, no-wrap
2613 msgid "B<server>"
2614 msgstr "B<user>"
2615
2616 # type: Plain text
2617 #. type: Plain text
2618 #: debconf.conf.5:242
2619 msgid "The host name or IP address of an LDAP server to connect to."
2620 msgstr ""
2621
2622 # type: TP
2623 #. type: TP
2624 #: debconf.conf.5:242
2625 #, fuzzy, no-wrap
2626 msgid "B<port>"
2627 msgstr "B<Format>"
2628
2629 #. type: Plain text
2630 #: debconf.conf.5:246
2631 msgid ""
2632 "The port on which to connect to the LDAP server. If none is given, the "
2633 "default port is used."
2634 msgstr ""
2635
2636 # type: TP
2637 #. type: TP
2638 #: debconf.conf.5:246
2639 #, fuzzy, no-wrap
2640 msgid "B<basedn>"
2641 msgstr "B<user>"
2642
2643 #. type: Plain text
2644 #: debconf.conf.5:251
2645 msgid ""
2646 "The DN under which all config items will be stored. Each config item will be "
2647 "assumed to live in a DN of cn=E<lt>item nameE<gt>,E<lt>Base DNE<gt>. If this "
2648 "structure is not followed, all bets are off."
2649 msgstr ""
2650
2651 # type: TP
2652 #. type: TP
2653 #: debconf.conf.5:251
2654 #, fuzzy, no-wrap
2655 msgid "B<binddn>"
2656 msgstr "B<Infd>"
2657
2658 # type: Plain text
2659 #. type: Plain text
2660 #: debconf.conf.5:255
2661 msgid ""
2662 "The DN to bind to the directory as. Anonymous bind will be used if none is "
2663 "specified."
2664 msgstr ""
2665
2666 # type: TP
2667 #. type: TP
2668 #: debconf.conf.5:255
2669 #, no-wrap
2670 msgid "B<bindpasswd>"
2671 msgstr ""
2672
2673 #. type: Plain text
2674 #: debconf.conf.5:259
2675 msgid ""
2676 "The password to use in an authenticated bind (used with binddn, above). If "
2677 "not specified, anonymous bind will be used."
2678 msgstr ""
2679
2680 #. type: Plain text
2681 #: debconf.conf.5:265
2682 msgid ""
2683 "This option should not be used in the general case. Anonymous binding should "
2684 "be sufficient most of the time for read-only access. Specifying a bind DN "
2685 "and password should be reserved for the occasional case where you wish to "
2686 "update the debconf configuration data."
2687 msgstr ""
2688
2689 # type: TP
2690 #. type: TP
2691 #: debconf.conf.5:266
2692 #, no-wrap
2693 msgid "B<keybykey>"
2694 msgstr ""
2695
2696 # type: Plain text
2697 #. type: Plain text
2698 #: debconf.conf.5:272
2699 msgid ""
2700 "Enable access to individual LDAP entries, instead of fetching them all at "
2701 "once in the beginning. This is very useful if you want to monitor your LDAP "
2702 "logs for specific debconf keys requested. In this way, you could also write "
2703 "custom handling code on the LDAP server part."
2704 msgstr ""
2705
2706 # type: Plain text
2707 #. type: Plain text
2708 #: debconf.conf.5:279
2709 msgid ""
2710 "Note that when this option is enabled, the connection to the LDAP server is "
2711 "kept active during the whole Debconf run. This is a little different from "
2712 "the all-in-one behavior where two brief connections are made to LDAP; in the "
2713 "beginning to retrieve all the entries, and in the end to save eventual "
2714 "changes."
2715 msgstr ""
2716
2717 # type: Plain text
2718 #. type: Plain text
2719 #: debconf.conf.5:284
2720 msgid ""
2721 "An example stanza setting up a database using this driver, assuming the "
2722 "remote database is on example.com and can be accessed anonymously:"
2723 msgstr ""
2724
2725 # type: Plain text
2726 #. type: Plain text
2727 #: debconf.conf.5:291
2728 #, no-wrap
2729 msgid ""
2730 " Name: ldapdb\n"
2731 " Driver: LDAP\n"
2732 " Readonly: true\n"
2733 " Server: example.com\n"
2734 " BaseDN: cn=debconf,dc=example,dc=com\n"
2735 " KeyByKey: 0\n"
2736 msgstr ""
2737
2738 # type: Plain text
2739 #. type: Plain text
2740 #: debconf.conf.5:294
2741 msgid ""
2742 "Another example, this time the LDAP database is on localhost, and can be "
2743 "written to:"
2744 msgstr ""
2745
2746 # type: Plain text
2747 #. type: Plain text
2748 #: debconf.conf.5:301
2749 #, no-wrap
2750 msgid ""
2751 " Name: ldapdb\n"
2752 " Driver: LDAP\n"
2753 " Server: localhost\n"
2754 " BaseDN: cn=debconf,dc=domain,dc=com\n"
2755 " BindPasswd: secret\n"
2756 " KeyByKey: 1\n"
2757 msgstr ""
2758
2759 # type: TP
2760 #. type: TP
2761 #: debconf.conf.5:302
2762 #, no-wrap
2763 msgid "B<Pipe>"
2764 msgstr "B<Pipe>"
2765
2766 # type: Plain text
2767 #. type: Plain text
2768 #: debconf.conf.5:307
2769 msgid ""
2770 "This special-purpose database driver reads and writes the database from "
2771 "standard input/output. It may be useful for people with special needs."
2772 msgstr ""
2773 "Este controlador de base de dados de próposito especial lê e grava a base de "
2774 "dados da entrada/saída padrão. Pode ser útil para pessoas com necessidades "
2775 "especiais."
2776
2777 # type: Plain text
2778 #. type: Plain text
2779 #: debconf.conf.5:314
2780 msgid ""
2781 "The format to read and write. See FORMATS below. Defaults to using a rfc-822 "
2782 "like format."
2783 msgstr ""
2784 "O formato para ler e gravar. Veja FORMATOS abaixo. O padrão é usar um "
2785 "formato como a rfc-822."
2786
2787 # type: TP
2788 #. type: TP
2789 #: debconf.conf.5:314
2790 #, no-wrap
2791 msgid "B<Infd>"
2792 msgstr "B<Infd>"
2793
2794 # type: Plain text
2795 #. type: Plain text
2796 #: debconf.conf.5:318
2797 msgid ""
2798 "File descriptor number to read from. Defaults to reading from stdin. If set "
2799 "to \"none\", the database will not read any data on startup."
2800 msgstr ""
2801 "Número do descritor de arquivo a partir do qual ler. O padrão é ler da "
2802 "entrada padrão (stdin). Caso definido para \"none\", a base de dados não irá "
2803 "ler nenhum dado na inicialização."
2804
2805 # type: TP
2806 #. type: TP
2807 #: debconf.conf.5:318
2808 #, no-wrap
2809 msgid "B<Outfd>"
2810 msgstr "B<Outfd>"
2811
2812 # type: Plain text
2813 #. type: Plain text
2814 #: debconf.conf.5:322
2815 #, fuzzy
2816 msgid ""
2817 "File descriptor number to write to. Defaults to writing to stdout. If set to "
2818 "\"none\", the database will be thrown away on shutdown."
2819 msgstr ""
2820 "Número do descritor de arquivo a partir do qual ler. O padrão é ler da "
2821 "entrada padrão (stdin). Caso definido para \"none\", a base de dados não irá "
2822 "ler nenhum dado na inicialização."
2823
2824 # type: Plain text
2825 #. type: Plain text
2826 #: debconf.conf.5:326
2827 msgid "That's all of the real drivers, now moving on to meta-drivers.."
2828 msgstr ""
2829 "Isto é tudo sobre controladores reais, agora vamos para os meta-"
2830 "controladores .."
2831
2832 # type: TP
2833 #. type: TP
2834 #: debconf.conf.5:326 debconf.conf.5:354
2835 #, no-wrap
2836 msgid "B<Stack>"
2837 msgstr "B<Stack>"
2838
2839 # type: Plain text
2840 #. type: Plain text
2841 #: debconf.conf.5:335
2842 msgid ""
2843 "This driver stacks up a number of other databases (of any type), and allows "
2844 "them to be accessed as one. When debconf asks for a value, the first "
2845 "database on the stack that contains the value returns it. If debconf writes "
2846 "something to the database, the write normally goes to the first driver on "
2847 "the stack that has the item debconf is modifying, and if none do, the new "
2848 "item is added to the first writable database on the stack."
2849 msgstr ""
2850 "Este controlador empilha várias outras base de dados (de qualquer tipo) e "
2851 "permite que as mesmas sejam acessadas como se fossem somente uma. Quando o "
2852 "debconf pergunta por um valor, a primeira base de dados na pilha que contém "
2853 "o valor o retorna. Caso o debconf escreva algo na base de dados, a escrita "
2854 "normalmente vai para o primeiro controlador na pilha que possui o item que o "
2855 "debconf está modificando, e caso nenhum tenha, o novo item é adicionado para "
2856 "o primeira base de dados gravável na pilha."
2857
2858 # type: Plain text
2859 #. type: Plain text
2860 #: debconf.conf.5:343
2861 msgid ""
2862 "Things become more interesting if one of the databases on the stack is "
2863 "readonly. Consider a stack of the databases foo, bar, and baz, where foo and "
2864 "baz are both readonly. Debconf wants to change an item, and this item is "
2865 "only present in baz, which is readonly. The stack driver is smart enough to "
2866 "realize that won't work, and it will copy the item from baz to bar, and the "
2867 "write will take place in bar. Now the item in baz is shadowed by the item in "
2868 "bar, and it will not longer be visible to debconf."
2869 msgstr ""
2870 "As coisas se tornam mais interessantes se uma das base de dados na pilha é "
2871 "somente leitura. Considere uma pilha de base de dados foo, bar e baz, one "
2872 "foo e baz são amas somente leitura. o Debconf quer modificar um item, e esse "
2873 "item está presente somente em baz, a qual é somente leitura. O controlador "
2874 "Stack (pilha) é inteligente o bastante para entender que isso não "
2875 "funcionará, irá copiar o item de baz para bar e a gravação será feita em "
2876 "bar. Agora o item em baz é sombreado pelo item em bar e não será mais para o "
2877 "debconf."
2878
2879 # type: Plain text
2880 #. type: Plain text
2881 #: debconf.conf.5:350
2882 msgid ""
2883 "This kind of thing is particularly useful if you want to point many systems "
2884 "at a central, readonly database, while still allowing things to be "
2885 "overridden on each system. When access controls are added to the picture, "
2886 "stacks allow you to do many other interesting things, like redirect all "
2887 "passwords to one database while a database underneath it handles everything "
2888 "else."
2889 msgstr ""
2890 "Este tipo de coisa é particularmente útil se você quer apontar muitos para "
2891 "uma base de dados central somente leitura, enquanto continua permitindo que "
2892 "as coisas sejam sobreescritas em cada sistema. Quando controles de acesso "
2893 "são adicionados a brincadeira, pilhas permitem que você faça muitas outras "
2894 "coisas interessantes, como redirecionar todas as senhas para uma base de "
2895 "dados enquanto a base de dados abaixo dessa gerencia tudo mais."
2896
2897 # type: Plain text
2898 #. type: Plain text
2899 #: debconf.conf.5:352
2900 msgid "Only one piece of configuration is needed to set up a stack:"
2901 msgstr ""
2902 "Somente um pouco de configuração é necessário para configurar uma pilha :"
2903
2904 # type: Plain text
2905 #. type: Plain text
2906 #: debconf.conf.5:358
2907 msgid ""
2908 "This is where you specify a list of other databases, by name, to tell it "
2909 "what makes up the stack."
2910 msgstr ""
2911 "É onde você especifica uma lista de outras base de dados, por nome, para "
2912 "dizer a pilha o que a compõe."
2913
2914 # type: Plain text
2915 #. type: Plain text
2916 #: debconf.conf.5:361 debconf.conf.5:387
2917 msgid "For example:"
2918 msgstr "Por exemplo :"
2919
2920 # type: Plain text
2921 #. type: Plain text
2922 #: debconf.conf.5:365
2923 #, no-wrap
2924 msgid ""
2925 " Name: megadb\n"
2926 " Driver: stack\n"
2927 " Stack: passworddb, configdb, companydb\n"
2928 msgstr ""
2929 " Name: megadb\n"
2930 " Driver: stack\n"
2931 " Stack: passworddb, configdb, companydb\n"
2932
2933 # type: Plain text
2934 #. type: Plain text
2935 #: debconf.conf.5:368
2936 msgid ""
2937 "WARNING: The stack driver is not very well tested yet. Use at your own risk."
2938 msgstr ""
2939 "AVISO: O controlador stack ainda não é muito bem testado. Use por seu "
2940 "próprio risco."
2941
2942 # type: Plain text
2943 #. type: Plain text
2944 #: debconf.conf.5:374
2945 msgid ""
2946 "This driver passes all requests on to another database driver. But it also "
2947 "copies all write requests to a backup database driver."
2948 msgstr ""
2949 "Este controlador passa todas as requisições para outro controlador de base "
2950 "de dados. Mas também copia todas as requisições de gravação para um "
2951 "controlador de base de dados backup."
2952
2953 # type: Plain text
2954 #. type: Plain text
2955 #: debconf.conf.5:376 debconf.conf.5:400
2956 msgid "You must specify the following fields to set up this driver:"
2957 msgstr ""
2958 "Você deve especificar os seguintes campos para configurar este controlador :"
2959
2960 # type: TP
2961 #. type: TP
2962 #: debconf.conf.5:378 debconf.conf.5:402
2963 #, no-wrap
2964 msgid "B<Db>"
2965 msgstr "B<Db>"
2966
2967 # type: Plain text
2968 #. type: Plain text
2969 #: debconf.conf.5:381 debconf.conf.5:405
2970 msgid "The database to read from and write to."
2971 msgstr "A base de dados a partir da qual ler e para a qual gravar."
2972
2973 # type: TP
2974 #. type: TP
2975 #: debconf.conf.5:381
2976 #, no-wrap
2977 msgid "B<Backupdb>"
2978 msgstr "B<Backupdb>"
2979
2980 # type: Plain text
2981 #. type: Plain text
2982 #: debconf.conf.5:384
2983 msgid "The name of the database to send copies of writes to."
2984 msgstr "O nome da base de dados para a qual enviar cópias das gravações."
2985
2986 # type: Plain text
2987 #. type: Plain text
2988 #: debconf.conf.5:392
2989 #, fuzzy, no-wrap
2990 msgid ""
2991 " Name: backup\n"
2992 " Driver: Backup\n"
2993 " Db: mydb\n"
2994 " Backupdb: mybackupdb\n"
2995 msgstr ""
2996 " Name: backup\n"
2997 " Driver: Backup\n"
2998 " Backupdb: mydb\n"
2999 " Backup: mybackupdb\n"
3000
3001 # type: Plain text
3002 #. type: Plain text
3003 #: debconf.conf.5:398
3004 msgid ""
3005 "This driver passes all requests on to another database driver, outputting "
3006 "verbose debugging output about the request and the result."
3007 msgstr ""
3008 "Este controlador passa todas as requisições para outro controlador de base "
3009 "de dados, exibindo saída de depuração verbosa sobre as requisições e "
3010 "resultados."
3011
3012 # type: SH
3013 #. type: SH
3014 #: debconf.conf.5:407
3015 #, no-wrap
3016 msgid "ACCESS CONTROLS"
3017 msgstr "CONTROLES DE ACCESSO"
3018
3019 # type: Plain text
3020 #. type: Plain text
3021 #: debconf.conf.5:411
3022 msgid ""
3023 "When you set up a database, you can also use some fields to specify access "
3024 "controls. You can specify that a database only accepts passwords, for "
3025 "example, or make a database only accept things with \"foo\" in their name."
3026 msgstr ""
3027 "Quando você configura ua base de dados, você pode também usar alguns campos "
3028 "para especificar controles de acesso. Você pode especificar que uma base de "
3029 "dados somente aceita senhas, por exemplo, ou fazer com que a base de dados "
3030 "aceite somente coisas com \"foo\" em seu nome."
3031
3032 # type: TP
3033 #. type: TP
3034 #: debconf.conf.5:411
3035 #, no-wrap
3036 msgid "B<Readonly>"
3037 msgstr "B<Readonly>"
3038
3039 # type: Plain text
3040 #. type: Plain text
3041 #: debconf.conf.5:416
3042 msgid ""
3043 "As was mentioned earlier, this access control, if set to \"true\", makes a "
3044 "database readonly. Debconf will read values from it, but will never write "
3045 "anything to it."
3046 msgstr ""
3047 "Como mencionado anteriormente, este controle de acesso, caso definido para "
3048 "\"true\", faz com que uma base de dados seja somente leitura. O Debconf irá "
3049 "ler valores a partir da mesma, mas nunca irá gravar coisa alguma nela."
3050
3051 # type: TP
3052 #. type: TP
3053 #: debconf.conf.5:416
3054 #, no-wrap
3055 msgid "B<Accept-Name>"
3056 msgstr "B<Accept-Name>"
3057
3058 # type: Plain text
3059 #. type: Plain text
3060 #: debconf.conf.5:422
3061 msgid ""
3062 "The text in this field is a perl-compatible regular expression that is "
3063 "matched against the names of items as they are requested from the database. "
3064 "Only if an items name matches the regular expression, will the database "
3065 "allow debconf to access or modify it."
3066 msgstr ""
3067 "O texto nesse campo é uma expressão regular compatível com perl, a qual é "
3068 "comparada com os nomes dos items a medida que os mesmos são requisitados a "
3069 "partir da base de dados. A base de dados permitirá ao debconf acessá-la ou "
3070 "modificá-la somente se os nomes dos items casarem com a expressão regular."
3071
3072 # type: TP
3073 #. type: TP
3074 #: debconf.conf.5:422
3075 #, no-wrap
3076 msgid "B<Reject-Name>"
3077 msgstr "B<Reject-Name>"
3078
3079 # type: Plain text
3080 #. type: Plain text
3081 #: debconf.conf.5:426
3082 msgid ""
3083 "Like Accept-Name, except any item name matching this regular expression will "
3084 "be rejected."
3085 msgstr ""
3086 "Como Accept-Name, exceto que qualquer nome de item que case com o expressão "
3087 "regular será rejeitado."
3088
3089 # type: TP
3090 #. type: TP
3091 #: debconf.conf.5:426
3092 #, no-wrap
3093 msgid "B<Accept-Type>"
3094 msgstr "B<Accept-Type>"
3095
3096 # type: Plain text
3097 #. type: Plain text
3098 #: debconf.conf.5:431
3099 msgid ""
3100 "Another regular expression, this matches against the type of the item that "
3101 "is being accessed. Only if the type matches the regex will access be granted."
3102 msgstr ""
3103 "Outra expressão regular, este checa com base no tipo do item que está sendo "
3104 "acessado. O acesso será permitido somente se o tipo casar com a expressão "
3105 "regular."
3106
3107 # type: TP
3108 #. type: TP
3109 #: debconf.conf.5:431
3110 #, no-wrap
3111 msgid "B<Reject-Type>"
3112 msgstr "B<Reject-Type>"
3113
3114 # type: Plain text
3115 #. type: Plain text
3116 #: debconf.conf.5:435
3117 msgid ""
3118 "Like Accept-Type, except any type matching this regular expression will be "
3119 "rejected."
3120 msgstr ""
3121 "Como Accept-Type, exceto que qualquer tipo casando com esta expressão "
3122 "regular será rejeitado."
3123
3124 # type: SH
3125 #. type: SH
3126 #: debconf.conf.5:435
3127 #, no-wrap
3128 msgid "FORMATS"
3129 msgstr "FORMATOS"
3130
3131 # type: Plain text
3132 #. type: Plain text
3133 #: debconf.conf.5:439
3134 msgid ""
3135 "Some of the database drivers use format modules to control the actual format "
3136 "in which the database is stored on disk. These formats are currently "
3137 "supported:"
3138 msgstr ""
3139 "Alguns dos controladores de base de dados usam módulos de formato para "
3140 "controlar o formato atual no qual a base de dados é armazenada em disco. Os "
3141 "seguintes formatos são atualmente suportados :"
3142
3143 # type: TP
3144 #. type: TP
3145 #: debconf.conf.5:439
3146 #, no-wrap
3147 msgid "B<822>"
3148 msgstr "B<822>"
3149
3150 # type: Plain text
3151 #. type: Plain text
3152 #: debconf.conf.5:444
3153 msgid ""
3154 "This is a file format loosely based upon the rfc-822 format for email "
3155 "message headers. Similar formats are used throughout Debian; in the dpkg "
3156 "status file, and so on."
3157 msgstr ""
3158 "Este é um formato de arquivo livremente baseado no formato rfc-822 para "
3159 "cabeçalhos de menasgens de e-mail. Formatos similares são usados por todo "
3160 "Debian; no arquivo de status do dpkg, e outros locais."
3161
3162 # type: Plain text
3163 #. type: Plain text
3164 #: debconf.conf.5:446
3165 msgid "Here is a more complicated example of a debconf.conf file."
3166 msgstr ""
3167
3168 # type: Plain text
3169 #. type: Plain text
3170 #: debconf.conf.5:452
3171 #, fuzzy, no-wrap
3172 msgid ""
3173 " # This stanza is used for general debconf setup.\n"
3174 " Config: stack\n"
3175 " Templates: templates\n"
3176 " Log: developer\n"
3177 " Debug: developer\n"
3178 msgstr ""
3179 " # Essa estrofe é usada para configuração geral do debconf.\n"
3180 " Config: stack\n"
3181 " Templates: templates\n"
3182 " Log-To: syslog\n"
3183 " Debug: developer\n"
3184
3185 # type: Plain text
3186 #. type: Plain text
3187 #: debconf.conf.5:457
3188 #, no-wrap
3189 msgid ""
3190 " # This is my own local database.\n"
3191 " Name: mydb\n"
3192 " Driver: DirTree\n"
3193 " Directory: /var/cache/debconf/config\n"
3194 msgstr ""
3195 " # Esta é minha prória base de dados local.\n"
3196 " Name: mydb\n"
3197 " Driver: DirTree\n"
3198 " Directory: /var/cache/debconf/config\n"
3199
3200 # type: Plain text
3201 #. type: Plain text
3202 #: debconf.conf.5:469
3203 #, fuzzy, no-wrap
3204 msgid ""
3205 " # This is another database that I use to hold\n"
3206 " # only X server configuration.\n"
3207 " Name: X\n"
3208 " Driver: File\n"
3209 " Filename: /etc/X11/debconf.dat\n"
3210 " Mode: 644\n"
3211 " # It's sorta hard to work out what questions\n"
3212 " # belong to X; it should be using a deeper\n"
3213 " # tree structure so I could just match on ^X/\n"
3214 " # Oh well.\n"
3215 " Accept-Name: xserver|xfree86|xbase\n"
3216 msgstr ""
3217 " # Esta é outra base de dados que eu uso para\n"
3218 "\t# armazenar somente a configuração do servidor X.\n"
3219 " Name: X\n"
3220 " Driver: File\n"
3221 " File: /etc/X11/debconf.dat\n"
3222 " Mode: 644\n"
3223 " # É meio complicado descobrir quais questões\n"
3224 "\t# pertencem ao X; deveria estr usando uma profunda\n"
3225 "\t# estrutura em àrvore assim eu poderia somente casar\n"
3226 "\t# com ^X/\n"
3227 "\t# Oh bem.\n"
3228 " Accept-Name: xserver|xfree86|xbase\n"
3229
3230 # type: Plain text
3231 #. type: Plain text
3232 #: debconf.conf.5:485
3233 #, fuzzy, no-wrap
3234 msgid ""
3235 " # This is our company's global, read-only\n"
3236 " # (for me!) debconf database.\n"
3237 " Name: company\n"
3238 " Driver: LDAP\n"
3239 " Server: debconf.foo.com\n"
3240 " BaseDN: cn=debconf,dc=foo,dc=com\n"
3241 " BindDN: uid=admin,dc=foo,dc=com\n"
3242 " BindPasswd: secret\n"
3243 " Readonly: true\n"
3244 " # I don't want any passwords that might be\n"
3245 " # floating around in there.\n"
3246 " Reject-Type: password\n"
3247 " # If this db is not accessible for whatever\n"
3248 " # reason, carry on anyway.\n"
3249 " Required: false\n"
3250 msgstr ""
3251 " # Este é o global de nossa empresa, base de dados\n"
3252 "\t# debconf somente-leitua (para mim!).\n"
3253 " Name: company\n"
3254 " Driver: SQL\n"
3255 " Server: debconf.foo.com\n"
3256 " Readonly: true\n"
3257 " Username: foo\n"
3258 " Password: bar\n"
3259 " # Não quero que nenhuma senha que possa estar\n"
3260 "\t# flutuando por aí aqui.\n"
3261 " Reject-Type: password\n"
3262 " # Caso esta base de dados não esteja acessível\n"
3263 "\t# por qualquer que seja a razão, continue de\n"
3264 "\t# qualquer forma.\n"
3265 " Required: false\n"
3266
3267 # type: Plain text
3268 #. type: Plain text
3269 #: debconf.conf.5:493
3270 #, fuzzy, no-wrap
3271 msgid ""
3272 " # I use this database to hold\n"
3273 " # passwords safe and secure.\n"
3274 " Name: passwords\n"
3275 " Driver: File\n"
3276 " Filename: /etc/debconf/passwords\n"
3277 " Mode: 600\n"
3278 " Accept-Type: password\n"
3279 msgstr ""
3280 " # E eu uso esta base de dados para\n"
3281 "\t# armazenar senhas protegidas e seguras.\n"
3282 " Name: passwords\n"
3283 " Driver: File\n"
3284 " File: /etc/debconf/passwords\n"
3285 " Mode: 600\n"
3286 " Owner: root\n"
3287 " Group: root\n"
3288 " Accept-Type: password\n"
3289
3290 # type: Plain text
3291 #. type: Plain text
3292 #: debconf.conf.5:506
3293 #, fuzzy, no-wrap
3294 msgid ""
3295 " # Let's put them all together\n"
3296 " # in a database stack.\n"
3297 " Name: stack\n"
3298 " Driver: Stack\n"
3299 " Stack: passwords, X, mydb, company\n"
3300 " # So, all passwords go to the password database.\n"
3301 " # Most X configuration stuff goes to the X\n"
3302 " # database, and anything else goes to my main\n"
3303 " # database. Values are looked up in each of those\n"
3304 " # in turn, and if none has a particular value, it\n"
3305 " # is looked up in the company-wide LDAP database\n"
3306 " # (unless it's a password).\n"
3307 msgstr ""
3308 " # vamos colocá-los todos juntos em uma pilha de\n"
3309 "\t# base de dados.\n"
3310 " Name: stack\n"
3311 " Driver: Stack\n"
3312 " Stack: passwords, X, mydb, company, dhcp\n"
3313 "\t# Assim, todas as senhas vão para a base de dados de\n"
3314 "\t# senhas. A maioria da coisas relacionadas à configuração\n"
3315 "\t# do X vão para a base de dados X e qualquer outra coisa\n"
3316 "\t# vai para minha base de dados principal. Os valores são\n"
3317 "\t# pesqusados em cada uma delas, e caso nenhuma tenha um\n"
3318 "\t# valor em particular, o mesmo é pesquisado na base de\n"
3319 "\t# dados da empresa ou talvez dhcp ( a menos que seja uma\n"
3320 "\t# senha).\n"
3321
3322 # type: Plain text
3323 #. type: Plain text
3324 #: debconf.conf.5:514
3325 #, fuzzy, no-wrap
3326 msgid ""
3327 " # A database is also used to hold templates. We\n"
3328 " # don't need to make this as fancy.\n"
3329 " Name: templates\n"
3330 " Driver: File\n"
3331 " Mode: 644\n"
3332 " Format: 822\n"
3333 " Filename: /var/cache/debconf/templates\n"
3334 msgstr ""
3335 " # Uma base de dados é também para armazenar modelos. Não\n"
3336 "\t# precisamos fazer com que ela seja mais bonita.\n"
3337 " Name: templates\n"
3338 " Driver: File\n"
3339 " Mode: 644\n"
3340 " Format: db\n"
3341 " Directory: /var/cache/debconf/templates\n"
3342
3343 # type: SH
3344 #. type: SH
3345 #: debconf.conf.5:514 confmodule.3:22
3346 #, no-wrap
3347 msgid "NOTES"
3348 msgstr "NOTAS"
3349
3350 # type: Plain text
3351 #. type: Plain text
3352 #: debconf.conf.5:517
3353 msgid ""
3354 "If you use something like ${HOME} in this file, it will be replaced with the "
3355 "value of the named environment variable."
3356 msgstr ""
3357 "Caso você utilize algo como ${HOME} neste arquivo, isso será substituído com "
3358 "o valor da variável de ambiente nomeada."
3359
3360 # type: Plain text
3361 #. type: Plain text
3362 #: debconf.conf.5:521
3363 msgid ""
3364 "Environment variables can also be used to override the databases on the fly, "
3365 "see B<debconf>(7)"
3366 msgstr ""
3367
3368 # type: Plain text
3369 #. type: Plain text
3370 #: debconf.conf.5:524
3371 msgid ""
3372 "The field names (the part of the line before the colon) is case-insensitive. "
3373 "The values, though, are case sensitive."
3374 msgstr ""
3375 "Os nomes dos campos (a parte da linha antes dos dois pontos) não são "
3376 "sensíveis à caixa (case-insensitive). Os valores, porém, são sensíveis à "
3377 "caixa (case-sensitive)."
3378
3379 # type: SH
3380 #. type: SH
3381 #: debconf.conf.5:524
3382 #, no-wrap
3383 msgid "PLANNED ENHANCEMENTS"
3384 msgstr "MELHORIAS PLANEJADAS"
3385
3386 # type: Plain text
3387 #. type: Plain text
3388 #: debconf.conf.5:533
3389 #, fuzzy
3390 msgid ""
3391 "More drivers and formats. Some ideas include: A SQL driver, with the "
3392 "capability to access a remote database. A DHCP driver, that makes available "
3393 "some special things like hostname, IP address, and DNS servers. A driver "
3394 "that pulls values out of public DNS records TXT fields. A format that is "
3395 "compatible with the output of cdebconf. An override driver, which can "
3396 "override the value field or flags of all requests that pass through it."
3397 msgstr ""
3398 "Mais controladores e formatos. Algumas idéias incluem : Um controlador SQL, "
3399 "com a capacidade de acessar uma base de dados remota. Um controlador LDAP. "
3400 "Um comtrolador que obtém valores de campos TXT de registros DNS públicos. "
3401 "Um formato que seja compatível com a saída do cdebconf. Um controlador de "
3402 "sobreescrita que pode sobreescrever o valor dos campos ou assinala todas as "
3403 "requisições que passam através do mesmo."
3404
3405 # type: SH
3406 #. type: SH
3407 #: debconf.conf.5:533
3408 #, no-wrap
3409 msgid "FILES"
3410 msgstr "ARQUIVOS"
3411
3412 # type: Plain text
3413 #. type: Plain text
3414 #: debconf.conf.5:535
3415 msgid "/etc/debconf.conf"
3416 msgstr "/etc/debconf.conf"
3417
3418 # type: Plain text
3419 #. type: Plain text
3420 #: debconf.conf.5:537
3421 msgid "~/.debconfrc"
3422 msgstr "~/.debconfrc"
3423
3424 # type: Plain text
3425 #. type: Plain text
3426 #: debconf.conf.5:539
3427 #, fuzzy
3428 msgid "B<debconf>(7)"
3429 msgstr "B<debconf>(8)"
3430
3431 # type: Plain text
3432 #. type: Plain text
3433 #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969
3434 msgid "Joey Hess E<lt>[email protected]<gt>"
3435 msgstr "Joey Hess E<lt>[email protected]<gt>"
3436
3437 # type: TH
3438 #. type: TH
3439 #: confmodule.3:1
3440 #, no-wrap
3441 msgid "CONFMODULE"
3442 msgstr "CONFMODULE"
3443
3444 # type: Plain text
3445 #. type: Plain text
3446 #: confmodule.3:4
3447 msgid "confmodule - communicate with Debian configuration system FrontEnd."
3448 msgstr ""
3449 "confmodule - comunica-se com o FronEnd do sistema de configuração Debian."
3450
3451 # type: Plain text
3452 #. type: Plain text
3453 #: confmodule.3:12
3454 #, no-wrap
3455 msgid ""
3456 " #!/bin/sh -e\n"
3457 " . /usr/share/debconf/confmodule\n"
3458 " db_version 2.0\n"
3459 " db_capb 'backup'\n"
3460 " CAPB=$RET\n"
3461 " db_input 'foo/bar' || true\n"
3462 " db_go || true\n"
3463 msgstr ""
3464 " #!/bin/sh -e\n"
3465 " . /usr/share/debconf/confmodule\n"
3466 " db_version 2.0\n"
3467 " db_capb 'backup'\n"
3468 " CAPB=$RET\n"
3469 " db_input 'foo/bar' || true\n"
3470 " db_go || true\n"
3471
3472 # type: Plain text
3473 #. type: Plain text
3474 #: confmodule.3:22
3475 msgid ""
3476 "This is a library of shell functions that eases communication with Debian's "
3477 "configuration management system. It can communicate with a FrontEnd via the "
3478 "debconf protocol. The design is that each command in the protocol is "
3479 "represented by one function in this module. The functionname is the same as "
3480 "the command, except it is prefixed with \"db_\" and is lower-case. Call the "
3481 "function and pass in any parameters you want to follow the command. Any "
3482 "textual return code from the FrontEnd will be returned to you in the $RET "
3483 "variable, while the numeric return code from the FrontEnd will be returned "
3484 "as a return code (and so those return codes must be captured or ignored)."
3485 msgstr ""
3486 "Esta é uma biblioteca de funções shell que facilita o comunicação com o "
3487 "sistema de gerenciamento de configuração Debian. Ela pode se comunicar com "
3488 "um FrontEnd através do protocolo debconf. O design é que cada comando no "
3489 "protocolo é representado por uma função neste módulo. O nome da função é o "
3490 "mesmo do comando, exceto que o nome é iniciado com \"db_\" é está em caixa "
3491 "baixa. Chame a função e passe quaisquer parâmetros que você queira que sigam "
3492 "o comando. Qualquer código de retorno textual do FrontEnd será retornado "
3493 "para você na variável $RET, enquanto o código de retorno numérico do "
3494 "FrontEnd será retornado como um código de retorno (e então aquelas códigos "
3495 "de retorno devem ser capturados ou ignorados)."
3496
3497 # type: Plain text
3498 #. type: Plain text
3499 #: confmodule.3:29
3500 #, fuzzy, no-wrap
3501 msgid ""
3502 "Once this library is loaded, any text you later output will go to standard\n"
3503 "error, rather than standard output. This is a good thing in general, because\n"
3504 "text sent to standard output is interpreted by the FrontEnd as commands. If\n"
3505 "you do want to send a command directly to the FrontEnd, you must output it\n"
3506 "to file descriptor 3, like this:\n"
3507 " echo GET foo/bar E<gt>&3\n"
3508 msgstr ""
3509 "Uma vez que essa biblioteca é carregada, qualquer texto que você enviar\n"
3510 "para a saída posteriormente será enviado para a saída de erros padrão ao\n"
3511 "invés da saída padrão. Esta é uma boa coisa geralmente, porque o texto\n"
3512 "enviado para a saída padrão é interpretado pelo FrontEnd como comandos.\n"
3513 "Caso você queira enviar um comando diretamente para o FrontEnd, você deve\n"
3514 "enviá-lo para o desccritor de arquivo 3, como isso :\n"
3515 " echo GET foo/bar E<gt>&3\n"
3516
3517 # type: Plain text
3518 #. type: Plain text
3519 #: confmodule.3:36
3520 msgid ""
3521 "The library checks to make sure it is actually speaking to a FrontEnd by "
3522 "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is "
3523 "assumed to be running. If not, the library turns into one, and runs a copy "
3524 "of the script that loaded the library connected to it. This means that if "
3525 "you source this library, you should do so very near to the top of your "
3526 "script, because everything before the sourcing of the library may well be "
3527 "run again."
3528 msgstr ""
3529 "A biblioteca checa para certificar-se se atualmente está conversando com um "
3530 "FrontEnd examinando a variável DEBIAN_HAS_FRONTEND. Caso esta esteja "
3531 "definida, é assumido que um FrontEnd está em execução. Caso contrário, a "
3532 "biblioteca se torna um, e executa uma cópia do script que carregou a "
3533 "biblioteca conectado a ela. Isto significa que se você se referenciar a esta "
3534 "biblioteca, você deve fazer isso bem próximo do início de seu script, pois "
3535 "tudo antes da referência à essa biblioteca pode ser executado novamente."
3536
3537 # type: Plain text
3538 #. type: Plain text
3539 #: confmodule.3:42
3540 #, fuzzy
3541 msgid ""
3542 "B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
3543 "debconf_specification in the debian-policy package"
3544 msgstr ""
3545 "B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8) "
3546 "B<debconf_specification>noB<pacote>debian-policy"
3547
3548 # type: TH
3549 #. type: TH
3550 #: debconf.7:1
3551 #, no-wrap
3552 msgid "DEBCONF"
3553 msgstr "DEBCONF"
3554
3555 # type: Plain text
3556 #. type: Plain text
3557 #: debconf.7:4
3558 msgid "debconf - Debian package configuration system"
3559 msgstr "debconf - Sistema de configuração de pacotes Debian"
3560
3561 # type: Plain text
3562 #. type: Plain text
3563 #: debconf.7:8
3564 #, fuzzy
3565 msgid ""
3566 "Debconf is a configuration system for Debian packages. There is a rarely-"
3567 "used command named debconf, documented in B<debconf>(1)"
3568 msgstr ""
3569 "Debconf é um sistema de configuração para pcotes Debian. Não existe um "
3570 "comando chamado \"debconf\"."
3571
3572 # type: Plain text
3573 #. type: Plain text
3574 #: debconf.7:16
3575 #, fuzzy
3576 #| msgid ""
3577 #| "Debconf provides a consistent interface for configuring packages, "
3578 #| "allowing you to choose from several user interface frontends. It supports "
3579 #| "preconfiguring packages before they are installed, which allows large "
3580 #| "installs and upgrades to ask you for all the necessary information up "
3581 #| "front, and then go do the work while you do something else. It lets you, "
3582 #| "if you're in a hurry, skip over less important questions and information "
3583 #| "while installing a package (and revisit it later)."
3584 msgid ""
3585 "Debconf provides a consistent interface for configuring packages, allowing "
3586 "you to choose from several user interface frontends. It supports "
3587 "preconfiguring packages before they are installed, which allows large "
3588 "installs and upgrades to ask you for all the necessary information up front, "
3589 "and then go do the work while you do something else. It lets you, if you're "
3590 "in a hurry, skip over less important questions and information while "
3591 "installing a package (and revisit it later)."
3592 msgstr ""
3593 "Debconf oferece uma interface consistente para a configuração de pacotes, "
3594 "perimitndo que você escolha entre diversos frontends a interface com o "
3595 "usuário. Ele suporta pré-configuração de pacotes antes que os mesmos sejam "
3596 "instalados, o que permite que grandes instalações e atualizações lhe pegunte "
3597 "toda a informação necessária antes e então continue a instalação enquanto "
3598 "você faz qualquer outra coisa. Ele lhe permite, se você está com pressa, "
3599 "pular questões e informação menos importantes enquanto instala um pacote (e "
3600 "revisitar esta questão posteriormente)."
3601
3602 # type: SH
3603 #. type: SH
3604 #: debconf.7:16
3605 #, no-wrap
3606 msgid "Preconfiguring packages"
3607 msgstr "Pré-configurando pacotes"
3608
3609 # type: Plain text
3610 #. type: Plain text
3611 #: debconf.7:22
3612 #, fuzzy
3613 msgid ""
3614 "Debconf can configure packages before they are even installed onto your "
3615 "system. This is useful because it lets all the questions the packages are "
3616 "going to ask be asked at the beginning of an install, so the rest of the "
3617 "install can proceed while you are away getting a cup of coffee."
3618 msgstr ""
3619 "Debconf pode configurar pacotes antes mesmo que eles sejam instalados em seu "
3620 "sistema. Isto é útil porque permite que todas as questões que os pacotes "
3621 "fariam sejam feitas no início de uma instalação, assim o restante da "
3622 "instalação pode prosseguir enquanto você sai para tomar uma xícara de café."
3623
3624 # type: Plain text
3625 #. type: Plain text
3626 #: debconf.7:27
3627 #, fuzzy
3628 msgid ""
3629 "If you use apt (version 0.5 or above), and you have apt-utils installed, "
3630 "each package apt installs will be automatically preconfigured. This is "
3631 "controlled via I</etc/apt/apt.conf.d/70debconf>"
3632 msgstr ""
3633 "Se você usao o apt (versão 0.5 ou superior) e possui o pacote apt-utils "
3634 "instalado, cada pacote que o apt instala será automaticamente pré-"
3635 "configurado. Isto é controlado via I</etc/apt/apt.conf.d/70debconf>"
3636
3637 # type: Plain text
3638 #. type: Plain text
3639 #: debconf.7:33
3640 #, fuzzy
3641 msgid ""
3642 "Sometimes you might want to preconfigure a package by hand, when you're not "
3643 "installing it with apt. You can use B<dpkg-preconfigure>(8) to do that, "
3644 "just pass it the filenames of the packages you want to preconfigure. You "
3645 "will need apt-utils installed for that to work."
3646 msgstr ""
3647 "Ás vezes você pode querer pré-configurar um pacote manualmente, quando você "
3648 "não está instalando o mesmo com o apt. Você pode usar B<dpkg-preconfigure "
3649 "(8)> para fazer isso, somente passe para o dpkg-preconfigure os nomes de "
3650 "arquivos dos pacotes que você quer pré-configurar. Você precisará do apt-"
3651 "utils instalado para que isso funcione."
3652
3653 # type: SH
3654 #. type: SH
3655 #: debconf.7:33
3656 #, no-wrap
3657 msgid "Reconfiguring packages"
3658 msgstr "Reconfigurando pacotes"
3659
3660 # type: Plain text
3661 #. type: Plain text
3662 #: debconf.7:40
3663 #, fuzzy
3664 msgid ""
3665 "Suppose you installed the package, and answered debconf's questions, but now "
3666 "that you've used it awhile, you realize you want to go back and change some "
3667 "of your answers. In the past, reinstalling a package was often the thing to "
3668 "do when you got in this situation, but when you reinstall the package, "
3669 "debconf seems to remember you have answered the questions, and doesn't ask "
3670 "them again (this is a feature)."
3671 msgstr ""
3672 "Suponha que você instalou o pacote e respondeu as questões do debconf, mas "
3673 "agora que você já o utilizou por um tempo, você decidiu que você quer voltar "
3674 "atrás e mudar algumas de suas respostas. Antigamente, reinstalar o pacote "
3675 "era geralmente o que teria de ser feito quando você se encontrava nesta "
3676 "situação, mas quando você reinstala um pacote, o debconf parece se lembrar "
3677 "que você respondeu as questões e não as pergunta novamente (isto é um "
3678 "recurso)."
3679
3680 # type: Plain text
3681 #. type: Plain text
3682 #: debconf.7:44
3683 #, no-wrap
3684 msgid ""
3685 "Luckily, debconf makes it easy to reconfigure any package that uses it.\n"
3686 "Suppose you want to reconfigure debconf itself. Just run, as root:\n"
3687 " dpkg-reconfigure debconf\n"
3688 msgstr ""
3689 "Felizmente, o debconf faz com que seja fácil reconfigurar qualquer pacote\n"
3690 "que o utilize. Suponha que você quer reconfigurar o próprio debconf.\n"
3691 "Somente execute, como root:\n"
3692 " dpkg-reconfigure debconf\n"
3693
3694 # type: Plain text
3695 #. type: Plain text
3696 #: debconf.7:49
3697 msgid ""
3698 "This will ask all the questions you saw when debconf was first installed. "
3699 "It may ask you other questions as well, since it asks even low priority "
3700 "questions that may have been skipped when the package was installed. You "
3701 "can use it on any other package that uses debconf, as well."
3702 msgstr ""
3703 "Isto irá lhe perguntar todas as questões que você viu quando o debconf fo "
3704 "instalado da primeira vez. Também poderá lhe perguntar outras questões, uma "
3705 "vez que são perguntadas até mesmo questões de baixa prioridade as quais "
3706 "podem ter sido omitidas quando o pacote foi instalado. Você pode usar isso "
3707 "em qualquer outro pacote que use o debconf, da mesma forma."
3708
3709 # type: SH
3710 #. type: SH
3711 #: debconf.7:49
3712 #, no-wrap
3713 msgid "Frontends"
3714 msgstr "Frontends"
3715
3716 # type: Plain text
3717 #. type: Plain text
3718 #: debconf.7:53
3719 msgid ""
3720 "One of debconf's unique features is that the interface it presents to you is "
3721 "only one of many, that can be swapped in at will. There are many debconf "
3722 "frontends available:"
3723 msgstr ""
3724 "Um dos recursos únicos do debconf é que a intrface que o mesmo apresenta a "
3725 "você é somente uma de muitas e que pode ser mudada à vontade. Existem muitos "
3726 "frontends debconf disponíveis :"
3727
3728 # type: TP
3729 #. type: TP
3730 #: debconf.7:53
3731 #, no-wrap
3732 msgid "B<dialog>"
3733 msgstr "B<dialog>"
3734
3735 # type: Plain text
3736 #. type: Plain text
3737 #: debconf.7:60
3738 #, fuzzy
3739 msgid ""
3740 "The default frontend, this uses the B<whiptail>(1) or B<dialog>(1) "
3741 "programs to display questions to you. It works in text mode."
3742 msgstr ""
3743 "O frontend padrão, usa os programas B<whiptail (1)> ou B<dialog (1)> para "
3744 "lhe exibir as questões. Funciona em modo texto."
3745
3746 # type: TP
3747 #. type: TP
3748 #: debconf.7:60
3749 #, no-wrap
3750 msgid "B<readline>"
3751 msgstr "B<readline>"
3752
3753 # type: Plain text
3754 #. type: Plain text
3755 #: debconf.7:72
3756 #, fuzzy
3757 msgid ""
3758 "The most traditional frontend, this looks quite similar to how Debian "
3759 "configuration always has been: a series of questions, printed out at the "
3760 "console using plain text, and prompts done using the readline library. It "
3761 "even supports tab completion. The libterm-readline-gnu-perl package is "
3762 "strongly recommended if you chose to use this frontend; the default readline "
3763 "module does not support prompting with default values. At the minimum, "
3764 "you'll need the perl-modules package installed to use this frontend."
3765 msgstr ""
3766 "O frontend mais tradicional, é parecido com como a configuração Debian "
3767 "sempre foi: uma série de questões, impressas no console usando texto puro, e "
3768 "perguntas feitas usando a biblioteca readline. Suporta até mesmo complemento "
3769 "de digitação usando a tecla tab. (Instale o pacote libterm-readline-gnu-perl "
3770 "para ter a maioria do suporte readline.)"
3771
3772 # type: Plain text
3773 #. type: Plain text
3774 #: debconf.7:77
3775 msgid ""
3776 "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to "
3777 "the previous question (if that is supported by the package that is using "
3778 "debconf), and pagedown (or ctrl-v) will skip forward to the next question."
3779 msgstr ""
3780 "Este frontend possui algumas teclas de atalho especiais. Seta para cima (ou "
3781 "ctrl-u) voltará para a questão anterior (caso isso seja suportado pelo "
3782 "pacote que está uando debconf) e seta para baixo (ou ctrl-v) irá pular para "
3783 "a próxima questão."
3784
3785 # type: Plain text
3786 #. type: Plain text
3787 #: debconf.7:80
3788 msgid ""
3789 "This is the best frontend for remote admin work over a slow connection, or "
3790 "for those who are comfortable with unix."
3791 msgstr ""
3792 "Este é o melhor frontend para administração remota sob uma conexão lenta ou "
3793 "para aqueles que estão confortáveis com o unix."
3794
3795 # type: TP
3796 #. type: TP
3797 #: debconf.7:81
3798 #, no-wrap
3799 msgid "B<noninteractive>"
3800 msgstr "B<noninteractive>"
3801
3802 # type: Plain text
3803 #. type: Plain text
3804 #: debconf.7:90
3805 #, fuzzy
3806 msgid ""
3807 "This is the anti-frontend. It never interacts with you at all, and makes the "
3808 "default answers be used for all questions. It might mail error messages to "
3809 "root, but that's it; otherwise it is completely silent and unobtrusive, a "
3810 "perfect frontend for automatic installs. If you are using this front-end, "
3811 "and require non-default answers to questions, you will need to preseed the "
3812 "debconf database; see the section below on Unattended Package Installation "
3813 "for more details."
3814 msgstr ""
3815 "Este é o anti-frontend. Ele nunca irá interagir com você e fará com que as "
3816 "repostas padrão sejam usadas para todas as questões. Ocasionalmente enviará "
3817 "e-mail para a conta root com o conteúdo das mensagens que o pacote deveria "
3818 "exibir, mas é só; por outro lado, é completamente silencioso e não "
3819 "intrusivo, um frontend perfeito para instalações automáticas."
3820
3821 # type: TP
3822 #. type: TP
3823 #: debconf.7:90
3824 #, no-wrap
3825 msgid "B<gnome>"
3826 msgstr "B<gnome>"
3827
3828 # type: Plain text
3829 #. type: Plain text
3830 #: debconf.7:96
3831 #, fuzzy
3832 msgid ""
3833 "This is a modern X GUI using the gtk and gnome libraries. Of course, it "
3834 "requires a valid DISPLAY to work; debconf will fall back to other frontends "
3835 "if it can't work. Note that this frontend requires you have the libgtk3-perl "
3836 "package installed."
3837 msgstr ""
3838 "Este é uma GUI X moderna que utiliza as bibliotecas gtk e gnome. É claro, "
3839 "requer um DISPLAY válido para funcionar; o debconf utilizará outros "
3840 "frontends caso este não possa ser usado. Note que este frontend requer o "
3841 "pacote libgnome-perl instalado."
3842
3843 # type: TP
3844 #. type: TP
3845 #: debconf.7:96
3846 #, fuzzy, no-wrap
3847 msgid "B<kde>"
3848 msgstr "B<Mode>"
3849
3850 #. type: Plain text
3851 #: debconf.7:102
3852 msgid ""
3853 "This frontend provides a modern X GUI based on the KDE Platform. You of "
3854 "course need a DISPLAY to use this frontend and you must install debconf-kde-"
3855 "helper package. The frontend will fall back to dialog if some of the "
3856 "prerequisites are not met."
3857 msgstr ""
3858
3859 # type: TP
3860 #. type: TP
3861 #: debconf.7:102
3862 #, no-wrap
3863 msgid "B<editor>"
3864 msgstr "B<editor>"
3865
3866 # type: Plain text
3867 #. type: Plain text
3868 #: debconf.7:110
3869 #, fuzzy
3870 msgid ""
3871 "This is for those fanatics who have to do everything in a text editor. It "
3872 "runs your editor on a file that looks something like a typical unix config "
3873 "file, and you edit the file to communicate with debconf. Debconf's author "
3874 "prefers to not comment regarding the circumstances that led to this frontend "
3875 "being written."
3876 msgstr ""
3877 "Este é para queles fanáticos que tem que fazer tudo em um editor de textos. "
3878 "Ele executa seu editor em um arquivo que parece com um arquivo de "
3879 "configuração unix típico e você edita o arquivo para se comunicar com o "
3880 "debconf. O autor do debconf usou a quinta emenda em relação as "
3881 "circunstâncias que levaram este frontend a ser escrito."
3882
3883 # type: TP
3884 #. type: TP
3885 #: debconf.7:110
3886 #, no-wrap
3887 msgid "B<web>"
3888 msgstr "B<web>"
3889
3890 # type: Plain text
3891 #. type: Plain text
3892 #: debconf.7:120
3893 #, fuzzy
3894 msgid ""
3895 "This frontend acts as a web server, that you connect to with your web "
3896 "browser, to browse the questions and answer them. It has a lot of promise, "
3897 "but is a little rough so far. When this frontend starts up, it will print "
3898 "out the location you should point your web browser to. You have to run the "
3899 "web browser on the same machine you are configuring, for security reasons."
3900 msgstr ""
3901 "Este frontend funciona como um servidor web, ao qual você se conecta com seu "
3902 "navegador web, para navegar pelas questões e respondê-las. Possui uma boa "
3903 "promessa, mas é um pouco pesado. Quando este frontend inicia, ele imprime a "
3904 "localização para a qual você deve apontar seu navegador. Você prcisa "
3905 "executar o navegador web na mesma máquina que você está configurando, por "
3906 "razões de segurança."
3907
3908 # type: Plain text
3909 #. type: Plain text
3910 #: debconf.7:126
3911 msgid ""
3912 "Do keep in mind that this is not a very secure frontend. Anyone who has "
3913 "access to the computer being configured can currently access the web server "
3914 "and configure things while this frontend is running. So this is more of a "
3915 "proof of concept than anything."
3916 msgstr ""
3917 "Tenha em mente que este não é um frontend mut seguro. Qualquer pessoa com "
3918 "acesso ao computador sendo configurado pode atualmente acessar o servidor "
3919 "web e configurar as coisas enquanto este frontend está em execução. Por isso "
3920 "ele é mais uma prova de conceito do que qualquer outra coisa."
3921
3922 # type: Plain text
3923 #. type: Plain text
3924 #: debconf.7:133
3925 #, no-wrap
3926 msgid ""
3927 "You can change the default frontend debconf uses by reconfiguring\n"
3928 "debconf. On the other hand, if you just want to change the frontend\n"
3929 "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n"
3930 "the name of the frontend to use. For example:\n"
3931 " DEBIAN_FRONTEND=readline apt-get install slrn\n"
3932 msgstr ""
3933 "Você pode mudar o frontend padrão que o debconf usa reconfigurando o\n"
3934 "debconf. Por outro lado, se você quer somente mudar o frontend por um\n"
3935 "minuto, você pode definir a variável de ambiente DEBIAN_FRONTEND para\n"
3936 "o nome do frontend que você quer usar. Por exemplo :\n"
3937 " DEBIAN_FRONTEND=readline apt-get install slrn\n"
3938
3939 # type: Plain text
3940 #. type: Plain text
3941 #: debconf.7:141
3942 #, fuzzy
3943 msgid ""
3944 "The B<dpkg-reconfigure>(8) and B<dpkg-preconfigure>(8) commands also let "
3945 "you pass I<--frontend=> to them, followed by the frontend you want them to "
3946 "use."
3947 msgstr ""
3948 "Os comando B<dpkg-reconfigure (8)> e B<dpkg-preconfigure (8)> também "
3949 "permitem que lhes sejam passados I<--frontend=> seguido pelo frontend que "
3950 "você quer usar."
3951
3952 # type: Plain text
3953 #. type: Plain text
3954 #: debconf.7:145
3955 msgid ""
3956 "Note that not all frontends will work in all circumstances. If a frontend "
3957 "fails to start up for some reason, debconf will print out a message "
3958 "explaining why, and fall back to the next-most similar frontend."
3959 msgstr ""
3960 "Note que nem todos os frontends funcionaram em todas as circunstâncias. Se "
3961 "um frontend falhar ao ser iniciado por alguma razão, o debconf irá imprimir "
3962 "uma mensagem explicando a razão e irá mudar para o próximo frontend mais "
3963 "similar."
3964
3965 # type: SH
3966 #. type: SH
3967 #: debconf.7:145
3968 #, no-wrap
3969 msgid "Priorities"
3970 msgstr "Prioridades"
3971
3972 # type: Plain text
3973 #. type: Plain text
3974 #: debconf.7:152
3975 msgid ""
3976 "Another nice feature of debconf is that the questions it asks you are "
3977 "prioritized. If you don't want to be bothered about every little thing, you "
3978 "can set up debconf to only ask you the most important questions. On the "
3979 "other hand, if you are a control freak, you can make it show you all "
3980 "questions. Each question has a priority. In increasing order of importance:"
3981 msgstr ""
3982 "Outro recurso legal do debconf é que as questões que ele lhe pergunta são "
3983 "priorizadas. Se você não quer ser incomodado sobre cada pequena coisa, você "
3984 "pode configurar o debconf para soment lhe perguntar as questões mais "
3985 "importantes. Por outro lado, se você é um maluco por controle, você pode "
3986 "fazer com que todas as questões sejam exibidas. Cada questão possui uma "
3987 "prioridade. Em ordem crescente de importância :"
3988
3989 # type: TP
3990 #. type: TP
3991 #: debconf.7:152 debconf-devel.7:294
3992 #, no-wrap
3993 msgid "B<low>"
3994 msgstr "B<baixa>"
3995
3996 # type: Plain text
3997 #. type: Plain text
3998 #: debconf.7:156
3999 msgid ""
4000 "Very trivial questions that have defaults that will work in the vast "
4001 "majority of cases."
4002 msgstr ""
4003 "Qestões bem triviais que possuem respostas padrão que funcionarão para a "
4004 "grande maioria dos casos."
4005
4006 # type: TP
4007 #. type: TP
4008 #: debconf.7:156 debconf-devel.7:298
4009 #, no-wrap
4010 msgid "B<medium>"
4011 msgstr "B<média>"
4012
4013 # type: Plain text
4014 #. type: Plain text
4015 #: debconf.7:159
4016 msgid "Normal questions that have reasonable defaults."
4017 msgstr "Questões normais que possuem respostas padrão razoáveis."
4018
4019 # type: TP
4020 #. type: TP
4021 #: debconf.7:159 debconf-devel.7:301
4022 #, no-wrap
4023 msgid "B<high>"
4024 msgstr "B<alta>"
4025
4026 # type: Plain text
4027 #. type: Plain text
4028 #: debconf.7:162
4029 msgid "Questions that don't have a reasonable default."
4030 msgstr "Questões que não possuem uma resposta padrão razoável."
4031
4032 # type: TP
4033 #. type: TP
4034 #: debconf.7:162 debconf-devel.7:304
4035 #, no-wrap
4036 msgid "B<critical>"
4037 msgstr "B<crítica>"
4038
4039 # type: Plain text
4040 #. type: Plain text
4041 #: debconf.7:165
4042 msgid "Questions that you really, really need to see (or else)."
4043 msgstr ""
4044
4045 # type: Plain text
4046 #. type: Plain text
4047 #: debconf.7:175
4048 #, fuzzy
4049 msgid ""
4050 "Only questions with a priority equal to or greater than the priority you "
4051 "choose will be shown to you. You can set the priority value by reconfiguring "
4052 "debconf, or temporarily by passing I<--priority=> followed by the value to "
4053 "the B<dpkg-reconfigure>(8) and B<dpkg-preconfigure>(8) commands, or by "
4054 "setting the DEBIAN_PRIORITY environment variable."
4055 msgstr ""
4056 "Somente questões com uma prioridade igual ou mairo que a prioridade que você "
4057 "escolheu lhe serão exibidas. Você pode definir o valor da prioridade "
4058 "reconfigurando o debconf ou temporariamente passando I<--priority=> seguido "
4059 "pelo valor para os comandos B<dpkg-reconfigure (8)> e B<dpkg-preconfigure "
4060 "(8)> ou definindo a variável de ambiente DEBIAN_PRIORITY."
4061
4062 # type: SH
4063 #. type: SH
4064 #: debconf.7:175
4065 #, no-wrap
4066 msgid "Backend Database"
4067 msgstr "Backend de Base de Dados"
4068
4069 # type: Plain text
4070 #. type: Plain text
4071 #: debconf.7:187
4072 #, fuzzy
4073 msgid ""
4074 "Debconf uses a rather flexible and potentially complicated backend database "
4075 "for storing data such as the answers to questions. The file B</etc/debconf."
4076 "conf> is used to configure this database. If you need to set up something "
4077 "complicated, like make debconf read a remote database to get defaults, with "
4078 "local overrides, read the B<debconf.conf>(5) man page for all the gory "
4079 "details. Generally, the backend database is located in B</var/cache/debconf/"
4080 "> ."
4081 msgstr ""
4082 "O Debconf utiliza um backend de base de dados bem flexível e complicado para "
4083 "o armazenamento de dados como respostas para as perguntas. O arquivo B</etc/"
4084 "debconf.conf> é usado para configurar este base de dados. Se você precisa "
4085 "configurar algo complicado, como fazer o debconf ler uma base de dados "
4086 "remota para obter os padrões, sem sobreescritas locais, leia a página de "
4087 "manual B<debconf.conf (5)> para todos os detalhes sangrentos.Geralmente, o "
4088 "backend de base de dados está localizado em the backend database is located "
4089 "in B</var/cache/debconf/>"
4090
4091 # type: SH
4092 #. type: SH
4093 #: debconf.7:187
4094 #, no-wrap
4095 msgid "Unattended Package Installation"
4096 msgstr ""
4097
4098 # type: Plain text
4099 #. type: Plain text
4100 #: debconf.7:194
4101 msgid ""
4102 "If you have many machines to manage you will sometimes find yourself in the "
4103 "position of needing to perform an unattended installation or upgrade of "
4104 "packages on many systems, when the default answers to some configuration "
4105 "questions are not acceptable. There are many ways to approach this; all "
4106 "involve setting up a database and making debconf use it to get the answers "
4107 "you want."
4108 msgstr ""
4109
4110 #. type: Plain text
4111 #: debconf.7:198
4112 msgid ""
4113 "You should really read B<debconf.conf>(5) before this section, as you need "
4114 "to understand how debconf's databases work."
4115 msgstr ""
4116
4117 #. type: Plain text
4118 #: debconf.7:205
4119 msgid ""
4120 "The easiest way to set up the database is to install the packages on one "
4121 "machine and answer their questions as usual. Or you might just use B<dpkg-"
4122 "preconfigure>(8) to configure a set of packages without actually installing "
4123 "them. Or you might even decide to write a plain text debconf database by "
4124 "hand or something."
4125 msgstr ""
4126
4127 # type: Plain text
4128 #. type: Plain text
4129 #: debconf.7:209
4130 msgid ""
4131 "Once you have the database, you need to figure out how to make the remote "
4132 "systems use it. This depends of course on the configuration of those systems "
4133 "and what database types they are set up to use."
4134 msgstr ""
4135
4136 # type: Plain text
4137 #. type: Plain text
4138 #: debconf.7:213
4139 msgid ""
4140 "If you are using the LDAP debconf database, an entire network of debian "
4141 "machines can also have any or all package installation questions answered "
4142 "automatically by a single LDAP server."
4143 msgstr ""
4144
4145 # type: Plain text
4146 #. type: Plain text
4147 #: debconf.7:222
4148 msgid ""
4149 "But perhaps you're using something a little bit easier to set up like, say, "
4150 "the default debconf database configuration, or you just don't want your "
4151 "remote systems to use LDAP all the time. In this case the best approach is "
4152 "to temporarily configure the remote systems to stack your database "
4153 "underneath their own existing databases, so they pull default values out of "
4154 "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and "
4155 "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample "
4156 "use:"
4157 msgstr ""
4158
4159 # type: Plain text
4160 #. type: Plain text
4161 #: debconf.7:226
4162 #, no-wrap
4163 msgid ""
4164 " cat /var/cache/debconf/config.dat | \\e\n"
4165 " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n"
4166 " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n"
4167 msgstr ""
4168
4169 # type: Plain text
4170 #. type: Plain text
4171 #: debconf.7:232
4172 msgid ""
4173 "This makes the debconf on the remote host read in the data that is piped "
4174 "across the ssh connection and interpret it as a plain text format debconf "
4175 "database. It then uses that database as a fallback database -- a read-only "
4176 "database that is queried for answers to questions if the system's main "
4177 "debconf database lacks answers."
4178 msgstr ""
4179
4180 # type: Plain text
4181 #. type: Plain text
4182 #: debconf.7:234
4183 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:"
4184 msgstr ""
4185
4186 # type: Plain text
4187 #. type: Plain text
4188 #: debconf.7:237
4189 #, no-wrap
4190 msgid ""
4191 " ssh -R 389:ldap:389 root@target \\e\n"
4192 " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n"
4193 msgstr ""
4194
4195 # type: Plain text
4196 #. type: Plain text
4197 #: debconf.7:242
4198 msgid ""
4199 "Here ssh is used to set up a tunneled LDAP connection and run debconf. "
4200 "Debconf is told to use the LDAP server as the fallback database. Note the "
4201 "use of \"{host:localhost}\" to configure how debconf accesses the LDAP "
4202 "database by providing the \"host\" field with a value of \"localhost\"."
4203 msgstr ""
4204
4205 # type: Plain text
4206 #. type: Plain text
4207 #: debconf.7:244
4208 msgid "Here's another method:"
4209 msgstr ""
4210
4211 # type: Plain text
4212 #. type: Plain text
4213 #: debconf.7:247
4214 #, no-wrap
4215 msgid ""
4216 " scp config.dat root@target:\n"
4217 " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n"
4218 msgstr ""
4219
4220 # type: Plain text
4221 #. type: Plain text
4222 #: debconf.7:252
4223 msgid ""
4224 "Here you copy the database over with scp, and then ssh over and make debconf "
4225 "use the file you copied over. This illustrates a shorthand you can use in "
4226 "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it "
4227 "defaults to \"filename\"."
4228 msgstr ""
4229
4230 # type: Plain text
4231 #. type: Plain text
4232 #: debconf.7:261
4233 msgid ""
4234 "There is only one problem with these uses of the DEBCONF_DB_FALLBACK "
4235 "parameter: While the fallback database can provide answers to questions the "
4236 "other debconf databases have never seen, it is only queried as a fallback; "
4237 "after the other databases. If you need to instead temporarily override an "
4238 "existing value on the remote host, you should instead use the "
4239 "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a "
4240 "temporary database, but this database is consulted before any others, and "
4241 "can be used to override existing values."
4242 msgstr ""
4243
4244 # type: SH
4245 #. type: SH
4246 #: debconf.7:261
4247 #, no-wrap
4248 msgid "Developing for Debconf"
4249 msgstr "Desenvolvendo para o Debconf"
4250
4251 # type: Plain text
4252 #. type: Plain text
4253 #: debconf.7:266
4254 #, fuzzy
4255 msgid ""
4256 "Package developers and others who want to develop packages that use debconf "
4257 "should read B<debconf-devel>(7) ."
4258 msgstr ""
4259 "Desenvolvedores de pacotes e outros que queiram usar o debconf devem ler o "
4260 "Tutorial dos Programadores Debconf (/usr/share/doc/debconf-doc/tutorial*)."
4261
4262 # type: Plain text
4263 #. type: Plain text
4264 #: debconf.7:274
4265 msgid ""
4266 "Briefly, debconf communicates with maintainer scripts or other programs via "
4267 "standard input and output, using a simple line-oriented command language "
4268 "similar to that used by common internet protocols such as SMTP. Programs use "
4269 "this protocol to ask debconf to display questions to the user, and retrieve "
4270 "the user's answers. The questions themselves are defined in a separate file, "
4271 "called the \"templates file\", which has a format not unlike a debian "
4272 "control file."
4273 msgstr ""
4274 "Resumidamente, o debconf se comunica com os scripts dos mantenedores ou "
4275 "outros programas através da entrada e saída padrão, usando uma linguagem de "
4276 "comando simples orientada a linha similar aquelas usadas por muitos "
4277 "protocolos internet como o SMTP. Os programas usam este protocolo para "
4278 "exibir questões ao usuário e recuperar as respostas dos usuários. As "
4279 "questões são definidas em um arquivo separado, chamado de \"arquivo "
4280 "modelo\" (ou template file), o qual possui um formato não muito diferente de "
4281 "um arquivo de controle debian."
4282
4283 # type: Plain text
4284 #. type: Plain text
4285 #: debconf.7:278
4286 msgid ""
4287 "Debian packages which use debconf typically provide both a templates file "
4288 "and a \"config\" script (run to preconfigure the package) in the control "
4289 "metadata section of the package."
4290 msgstr ""
4291 "Pacotes Debian que usam o debconf tipicamente oferecem ambos um arquivo de "
4292 "modelo e um script \"config\" (executado para pré-configurar o pacote) na "
4293 "seção de controle de metadados do pacote."
4294
4295 # type: SH
4296 #. type: SH
4297 #: debconf.7:278
4298 #, no-wrap
4299 msgid "ENVIRONMENT"
4300 msgstr "AMBIENTE"
4301
4302 # type: TP
4303 #. type: TP
4304 #: debconf.7:279
4305 #, no-wrap
4306 msgid "B<DEBIAN_FRONTEND>"
4307 msgstr "B<DEBIAN_FRONTEND>"
4308
4309 # type: Plain text
4310 #. type: Plain text
4311 #: debconf.7:282
4312 msgid "Used to temporarily change the frontend debconf uses. See above."
4313 msgstr ""
4314 "Usado para mudar temporariamente o frontend debconf utilizado. Veja acima."
4315
4316 # type: TP
4317 #. type: TP
4318 #: debconf.7:282
4319 #, no-wrap
4320 msgid "B<DEBIAN_PRIORITY>"
4321 msgstr "B<DEBIAN_PRIORITY>"
4322
4323 # type: Plain text
4324 #. type: Plain text
4325 #: debconf.7:286
4326 msgid ""
4327 "Used to temporarily change the minimum priority of question debconf will "
4328 "display. See above."
4329 msgstr ""
4330 "Usado para mudar temporariamente o prioridade mínima das questões que o "
4331 "debconf exibirá. Veja acima."
4332
4333 # type: TP
4334 #. type: TP
4335 #: debconf.7:286 debconf-devel.7:576
4336 #, no-wrap
4337 msgid "B<DEBCONF_DEBUG>"
4338 msgstr "B<DEBCONF_DEBUG>"
4339
4340 # type: Plain text
4341 #. type: Plain text
4342 #: debconf.7:292
4343 #, fuzzy
4344 msgid ""
4345 "Turns on debugging output on standard error. May be set to a facility name "
4346 "or a regular expression which matches a facility name (such as '.*' to "
4347 "output all debug info). The facility names include:"
4348 msgstr ""
4349 "Habilita a saída da depuração na saída padrão. Pode ser definido para o nome "
4350 "de uma facility ou uma expressão regular que case com o nome da facility "
4351 "(como '.*' para mostrar toda a informação de depuração). Os nomes de "
4352 "facility incluem :"
4353
4354 # type: TP
4355 #. type: TP
4356 #: debconf.7:292
4357 #, no-wrap
4358 msgid "B<user>"
4359 msgstr "B<user>"
4360
4361 # type: Plain text
4362 #. type: Plain text
4363 #: debconf.7:295
4364 msgid "Debugging info of interest to a debconf user."
4365 msgstr "Informação de depuração de interesse para um usuário debconf."
4366
4367 # type: TP
4368 #. type: TP
4369 #: debconf.7:295
4370 #, no-wrap
4371 msgid "B<developer>"
4372 msgstr "B<developer>"
4373
4374 # type: Plain text
4375 #. type: Plain text
4376 #: debconf.7:298
4377 msgid "Debugging info of interest to a package developer."
4378 msgstr "Informação de depuração de interesse para um desenvolvedor de pacotes."
4379
4380 # type: TP
4381 #. type: TP
4382 #: debconf.7:298
4383 #, no-wrap
4384 msgid "B<db>"
4385 msgstr "B<db>"
4386
4387 # type: Plain text
4388 #. type: Plain text
4389 #: debconf.7:301
4390 msgid "Debugging info about the backend database."
4391 msgstr "Informação de depuração sobre o backend de base de dados."
4392
4393 # type: TP
4394 #. type: TP
4395 #: debconf.7:302
4396 #, fuzzy, no-wrap
4397 msgid "B<DEBCONF_NOWARNINGS>"
4398 msgstr "B<DEBCONF_TERSE>"
4399
4400 # type: Plain text
4401 #. type: Plain text
4402 #: debconf.7:306
4403 msgid ""
4404 "Set to \"yes\" to disable some warnings that debconf may display. Does not "
4405 "suppress display of fatal errors."
4406 msgstr ""
4407
4408 # type: TP
4409 #. type: TP
4410 #: debconf.7:306
4411 #, no-wrap
4412 msgid "B<DEBCONF_TERSE>"
4413 msgstr "B<DEBCONF_TERSE>"
4414
4415 # type: Plain text
4416 #. type: Plain text
4417 #: debconf.7:310
4418 msgid ""
4419 "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on "
4420 "the verbiage as much as possible."
4421 msgstr ""
4422 "Defina como \"yes\" para habilitar o modo resumido, no qual os frontends "
4423 "debconf reduzem a verbosidade o máximo possível."
4424
4425 # type: TP
4426 #. type: TP
4427 #: debconf.7:310
4428 #, fuzzy, no-wrap
4429 msgid "B<DEBCONF_DB_FALLBACK>"
4430 msgstr "B<DEBCONF_DEBUG>"
4431
4432 # type: Plain text
4433 #. type: Plain text
4434 #: debconf.7:320
4435 msgid ""
4436 "Stack a database after the normally used databases, so that it is used as a "
4437 "fallback to get configuration information from. See \"Unattended Package "
4438 "Installation\" above. If the value of the variable is the name of an "
4439 "existing database in debconf.conf, then that database will be used. "
4440 "Otherwise, the environment variable can be used to configure a database on "
4441 "the fly, by telling the type of database, and optionally passing field:value "
4442 "settings, inside curly braces after the type. Spaces are used to separate "
4443 "fields, so you cannot specify a field value containing whitespace."
4444 msgstr ""
4445
4446 # type: Plain text
4447 #. type: Plain text
4448 #: debconf.7:323
4449 #, no-wrap
4450 msgid ""
4451 "Thus, this uses the fallbackdb in debconf.conf:\n"
4452 " DEBCONF_DB_FALLBACK=fallbackdb\n"
4453 msgstr ""
4454
4455 # type: Plain text
4456 #. type: Plain text
4457 #: debconf.7:327
4458 #, no-wrap
4459 msgid ""
4460 "While this sets up a new database of type File, and tells it a filename to\n"
4461 "use and turns off backups:\n"
4462 " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n"
4463 msgstr ""
4464
4465 # type: Plain text
4466 #. type: Plain text
4467 #: debconf.7:330
4468 #, no-wrap
4469 msgid ""
4470 "And as a shorthand, this sets up a database of type File with a filename:\n"
4471 " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n"
4472 msgstr ""
4473
4474 # type: Plain text
4475 #. type: Plain text
4476 #: debconf.7:333
4477 msgid ""
4478 "Note that if a fallback database is set up on the fly, it will be read-only "
4479 "by default."
4480 msgstr ""
4481
4482 # type: TP
4483 #. type: TP
4484 #: debconf.7:333
4485 #, fuzzy, no-wrap
4486 msgid "B<DEBCONF_DB_OVERRIDE>"
4487 msgstr "B<DEBCONF_TERSE>"
4488
4489 # type: Plain text
4490 #. type: Plain text
4491 #: debconf.7:338
4492 msgid ""
4493 "Stack a database before the normally used databases, so that it can override "
4494 "values from them. The value of the variable works the same as does the value "
4495 "of DEBCONF_DB_FALLBACK."
4496 msgstr ""
4497
4498 # type: TP
4499 #. type: TP
4500 #: debconf.7:338
4501 #, fuzzy, no-wrap
4502 msgid "B<DEBCONF_DB_REPLACE>"
4503 msgstr "B<DEBCONF_DEBUG>"
4504
4505 # type: Plain text
4506 #. type: Plain text
4507 #: debconf.7:343
4508 msgid ""
4509 "Use a given database instead of the normally used databases. This may be "
4510 "useful for testing with a separate database without having to create a "
4511 "separate debconf.conf, or to avoid locking the normal databases."
4512 msgstr ""
4513
4514 # type: TP
4515 #. type: TP
4516 #: debconf.7:343
4517 #, fuzzy, no-wrap
4518 msgid "B<DEBCONF_SYSTEMRC>"
4519 msgstr "B<DEBCONF_TERSE>"
4520
4521 # type: Plain text
4522 #. type: Plain text
4523 #: debconf.7:349
4524 msgid ""
4525 "If this environment variable is set, debconf will ignore a user's ~/."
4526 "debconfrc file, and use the system one instead. If it is set to the name of "
4527 "a regular file, debconf will use that file in preference to the system "
4528 "configuration files."
4529 msgstr ""
4530
4531 # type: TP
4532 #. type: TP
4533 #: debconf.7:349
4534 #, fuzzy, no-wrap
4535 msgid "B<DEBCONF_FORCE_DIALOG>"
4536 msgstr "B<DEBCONF_TERSE>"
4537
4538 # type: Plain text
4539 #. type: Plain text
4540 #: debconf.7:353
4541 msgid ""
4542 "If this environment variable is set, debconf will use dialog in preference "
4543 "to whiptail for the dialog frontend."
4544 msgstr ""
4545
4546 # type: TP
4547 #. type: TP
4548 #: debconf.7:353
4549 #, fuzzy, no-wrap
4550 msgid "B<DEBCONF_FORCE_XDIALOG>"
4551 msgstr "B<DEBCONF_DEBUG>"
4552
4553 # type: Plain text
4554 #. type: Plain text
4555 #: debconf.7:357
4556 msgid ""
4557 "If this environment variable is set, debconf will use Xdialog in preference "
4558 "to whiptail for the dialog frontend."
4559 msgstr ""
4560
4561 # type: TP
4562 #. type: TP
4563 #: debconf.7:357
4564 #, fuzzy, no-wrap
4565 msgid "B<DEBCONF_NONINTERACTIVE_SEEN>"
4566 msgstr "B<DEBCONF_TERSE>"
4567
4568 # type: Plain text
4569 #. type: Plain text
4570 #: debconf.7:361
4571 msgid ""
4572 "Set to \"true\" to cause the seen flag to be set for questions asked in the "
4573 "noninteractive frontend."
4574 msgstr ""
4575
4576 # type: SH
4577 #. type: SH
4578 #: debconf.7:361
4579 #, no-wrap
4580 msgid "BUGS"
4581 msgstr "BUGS"
4582
4583 # type: Plain text
4584 #. type: Plain text
4585 #: debconf.7:363
4586 msgid "Probably quite a few, there's a lot of code here."
4587 msgstr "Provavelmente muitos, existe muito código aqui."
4588
4589 # type: Plain text
4590 #. type: Plain text
4591 #: debconf.7:365
4592 msgid ""
4593 "If you do file a bug report, be sure to include the following information:"
4594 msgstr ""
4595 "Caso você reporte um bug, certifique-se de incluir a seguinte informação :"
4596
4597 # type: TP
4598 #. type: TP
4599 #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469
4600 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484
4601 #: debconf-devel.7:489
4602 #, no-wrap
4603 msgid "B<*>"
4604 msgstr "B<*>"
4605
4606 # type: Plain text
4607 #. type: Plain text
4608 #: debconf.7:368
4609 msgid "The debconf frontend you were using when the problem occurred"
4610 msgstr "O frontend debconf que você estava usando quando o problema ocorreu"
4611
4612 # type: Plain text
4613 #. type: Plain text
4614 #: debconf.7:371
4615 msgid "What you did to trigger the problem."
4616 msgstr "O que você fez para produzir o problema."
4617
4618 # type: Plain text
4619 #. type: Plain text
4620 #: debconf.7:376
4621 #, fuzzy
4622 msgid ""
4623 "The full text of any error messages. If you can reproduce the bug, do so "
4624 "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot."
4625 msgstr ""
4626 "O texto completo de quaisqer mensagens de erro. Caso você possa reproduzir o "
4627 "bug, faça isso com DEBCONF_DEBUG='.*' definido e inclua. Isto acelera muito "
4628 "a depuração."
4629
4630 # type: Plain text
4631 #. type: Plain text
4632 #: debconf.7:382
4633 #, fuzzy
4634 msgid ""
4635 "B<debconf.conf>(5), B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-"
4636 "reconfigure>(8), B<debconf>(1),"
4637 msgstr "B<debconf.conf>(5), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8),"
4638
4639 # type: TH
4640 #. type: TH
4641 #: debconf-devel.7:1
4642 #, fuzzy, no-wrap
4643 msgid "DEBCONF-DEVEL"
4644 msgstr "DEBCONF"
4645
4646 # type: Plain text
4647 #. type: Plain text
4648 #: debconf-devel.7:4
4649 msgid "debconf - developers guide"
4650 msgstr ""
4651
4652 # type: Plain text
4653 #. type: Plain text
4654 #: debconf-devel.7:6
4655 msgid "This is a guide for developing packages that use debconf."
4656 msgstr ""
4657
4658 # type: Plain text
4659 #. type: Plain text
4660 #: debconf-devel.7:9
4661 msgid ""
4662 "This manual assumes that you are familiar with debconf as a user, and are "
4663 "familiar with the basics of debian package construction."
4664 msgstr ""
4665
4666 # type: Plain text
4667 #. type: Plain text
4668 #: debconf-devel.7:18
4669 msgid ""
4670 "This manual begins by explaining two new files that are added to debian "
4671 "packages that use debconf. Then it explains how the debconf protocol works, "
4672 "and points you at some libraries that will let your programs speak the "
4673 "protocol. It discusses other maintainer scripts that debconf is typically "
4674 "used in: the postinst and postrm scripts. Then moves on to more advanced "
4675 "topics like shared debconf templates, debugging, and some common techniques "
4676 "and pitfalls of programming with debconf. It closes with a discussion of "
4677 "debconf's current shortcomings."
4678 msgstr ""
4679
4680 # type: SH
4681 #. type: SH
4682 #: debconf-devel.7:18
4683 #, no-wrap
4684 msgid "THE CONFIG SCRIPT"
4685 msgstr ""
4686
4687 # type: Plain text
4688 #. type: Plain text
4689 #: debconf-devel.7:23
4690 msgid ""
4691 "Debconf adds an additional maintainer script, the config script, to the set "
4692 "of maintainer scripts that can be in debian packages (the postinst, preinst, "
4693 "postrm, and prerm). The config script is responsible for asking any "
4694 "questions necessary to configure the package."
4695 msgstr ""
4696
4697 # type: Plain text
4698 #. type: Plain text
4699 #: debconf-devel.7:28
4700 msgid ""
4701 "Note: It is a little confusing that dpkg refers to running a package's "
4702 "postinst script as \"configuring\" the package, since a package that uses "
4703 "debconf is often fully pre-configured, by its config script, before the "
4704 "postinst ever runs. Oh well."
4705 msgstr ""
4706
4707 # type: Plain text
4708 #. type: Plain text
4709 #: debconf-devel.7:34
4710 msgid ""
4711 "Like the postinst, the config script is passed two parameters when it is "
4712 "run. The first tells what action is being performed, and the second is the "
4713 "version of the package that is currently installed. So, like in a postinst, "
4714 "you can use dpkg --compare-versions on $2 to make some behavior happen only "
4715 "on upgrade from a particular version of a package, and things like that."
4716 msgstr ""
4717
4718 # type: Plain text
4719 #. type: Plain text
4720 #: debconf-devel.7:36
4721 msgid "The config script can be run in one of three ways:"
4722 msgstr ""
4723
4724 # type: TP
4725 #. type: TP
4726 #: debconf-devel.7:36
4727 #, fuzzy, no-wrap
4728 msgid "B<1>"
4729 msgstr "B<*>"
4730
4731 # type: Plain text
4732 #. type: Plain text
4733 #: debconf-devel.7:40
4734 msgid ""
4735 "If a package is pre-configured, with dpkg-preconfigure, its config script is "
4736 "run, and is passed the parameters \"configure\", and installed-version."
4737 msgstr ""
4738
4739 # type: TP
4740 #. type: TP
4741 #: debconf-devel.7:40
4742 #, fuzzy, no-wrap
4743 msgid "B<2>"
4744 msgstr "B<822>"
4745
4746 # type: Plain text
4747 #. type: Plain text
4748 #: debconf-devel.7:47
4749 msgid ""
4750 "When a package's postinst is run, debconf will try to run the config script "
4751 "then too, and it will be passed the same parameters it was passed when it is "
4752 "pre-configured. This is necessary because the package might not have been "
4753 "pre-configured, and the config script still needs to get a chance to run. "
4754 "See HACKS for details."
4755 msgstr ""
4756
4757 # type: TP
4758 #. type: TP
4759 #: debconf-devel.7:47
4760 #, fuzzy, no-wrap
4761 msgid "B<3>"
4762 msgstr "B<*>"
4763
4764 # type: Plain text
4765 #. type: Plain text
4766 #: debconf-devel.7:52
4767 msgid ""
4768 "If a package is reconfigured, with dpkg-reconfigure, its config script it "
4769 "run, and is passed the parameters \"reconfigure\" and installed-version."
4770 msgstr ""
4771
4772 # type: Plain text
4773 #. type: Plain text
4774 #: debconf-devel.7:58
4775 msgid ""
4776 "Note that since a typical package install or upgrade using apt runs steps 1 "
4777 "and 2, the config script will typically be run twice. It should do nothing "
4778 "the second time (to ask questions twice in a row is annoying), and it should "
4779 "definitely be idempotent. Luckily, debconf avoids repeating questions by "
4780 "default, so this is generally easy to accomplish."
4781 msgstr ""
4782
4783 # type: Plain text
4784 #. type: Plain text
4785 #: debconf-devel.7:64
4786 msgid ""
4787 "Note that the config script is run before the package is unpacked. It should "
4788 "only use commands that are in essential packages. The only dependency of "
4789 "your package that is guaranteed to be met when its config script is run is a "
4790 "dependency (possibly versioned) on debconf itself."
4791 msgstr ""
4792
4793 # type: Plain text
4794 #. type: Plain text
4795 #: debconf-devel.7:70
4796 msgid ""
4797 "The config script should not need to modify the filesystem at all. It just "
4798 "examines the state of the system, and asks questions, and debconf stores the "
4799 "answers to be acted on later by the postinst script. Conversely, the "
4800 "postinst script should almost never use debconf to ask questions, but should "
4801 "instead act on the answers to questions asked by the config script."
4802 msgstr ""
4803
4804 # type: SH
4805 #. type: SH
4806 #: debconf-devel.7:70
4807 #, no-wrap
4808 msgid "THE TEMPLATES FILE"
4809 msgstr ""
4810
4811 # type: Plain text
4812 #. type: Plain text
4813 #: debconf-devel.7:73
4814 msgid ""
4815 "A package that uses debconf probably wants to ask some questions. These "
4816 "questions are stored, in template form, in the templates file."
4817 msgstr ""
4818
4819 # type: Plain text
4820 #. type: Plain text
4821 #: debconf-devel.7:78
4822 msgid ""
4823 "Like the config script, the templates file is put in the control.tar.gz "
4824 "section of a deb. Its format is similar to a debian control file; a set of "
4825 "stanzas separated by blank lines, with each stanza having a RFC822-like form:"
4826 msgstr ""
4827
4828 # type: Plain text
4829 #. type: Plain text
4830 #: debconf-devel.7:94
4831 #, no-wrap
4832 msgid ""
4833 " Template: foo/bar\n"
4834 " Type: string\n"
4835 " Default: foo\n"
4836 " Description: This is a sample string question.\n"
4837 " This is its extended description.\n"
4838 " .\n"
4839 " Notice that:\n"
4840 " - Like in a debian package description, a dot\n"
4841 " on its own line sets off a new paragraph.\n"
4842 " - Most text is word-wrapped, but doubly-indented\n"
4843 " text is left alone, so you can use it for lists\n"
4844 " of items, like this list. Be careful, since\n"
4845 " it is not word-wrapped, if it's too wide\n"
4846 " it will look bad. Using it for short items\n"
4847 " is best (so this is a bad example).\n"
4848 msgstr ""
4849
4850 # type: Plain text
4851 #. type: Plain text
4852 #: debconf-devel.7:99
4853 #, no-wrap
4854 msgid ""
4855 " Template: foo/baz\n"
4856 " Type: boolean\n"
4857 " Description: Clear enough, no?\n"
4858 " This is another question, of boolean type.\n"
4859 msgstr ""
4860
4861 # type: Plain text
4862 #. type: Plain text
4863 #: debconf-devel.7:103
4864 msgid ""
4865 "For some real-life examples of templates files, see /var/lib/dpkg/info/"
4866 "debconf.templates, and other .templates files in that directory."
4867 msgstr ""
4868
4869 # type: Plain text
4870 #. type: Plain text
4871 #: debconf-devel.7:105
4872 msgid "Let's look at each of the fields in turn.."
4873 msgstr ""
4874
4875 # type: TP
4876 #. type: TP
4877 #: debconf-devel.7:105
4878 #, fuzzy, no-wrap
4879 msgid "B<Template>"
4880 msgstr "B<Templates>"
4881
4882 # type: Plain text
4883 #. type: Plain text
4884 #: debconf-devel.7:111
4885 msgid ""
4886 "The name of the template, in the 'Template' field, is generally prefixed "
4887 "with the name of the package. After that the namespace is wide open; you can "
4888 "use a simple flat layout like the one above, or set up \"subdirectories\" "
4889 "containing related questions."
4890 msgstr ""
4891
4892 # type: TP
4893 #. type: TP
4894 #: debconf-devel.7:111
4895 #, fuzzy, no-wrap
4896 msgid "B<Type>"
4897 msgstr "B<Pipe>"
4898
4899 # type: Plain text
4900 #. type: Plain text
4901 #: debconf-devel.7:115
4902 msgid ""
4903 "The type of the template determines what kind of widget is displayed to the "
4904 "user. The currently supported types are:"
4905 msgstr ""
4906
4907 # type: TP
4908 #. type: TP
4909 #: debconf-devel.7:116
4910 #, fuzzy, no-wrap
4911 msgid "B<string>"
4912 msgstr "B<alta>"
4913
4914 # type: Plain text
4915 #. type: Plain text
4916 #: debconf-devel.7:119
4917 msgid ""
4918 "Results in a free-form input field that the user can type any string into."
4919 msgstr ""
4920
4921 # type: TP
4922 #. type: TP
4923 #: debconf-devel.7:119
4924 #, no-wrap
4925 msgid "B<password>"
4926 msgstr ""
4927
4928 # type: Plain text
4929 #. type: Plain text
4930 #: debconf-devel.7:124
4931 msgid ""
4932 "Prompts the user for a password. Use this with caution; be aware that the "
4933 "password the user enters will be written to debconf's database. You should "
4934 "probably clean that value out of the database as soon as is possible."
4935 msgstr ""
4936
4937 # type: TP
4938 #. type: TP
4939 #: debconf-devel.7:124
4940 #, no-wrap
4941 msgid "B<boolean>"
4942 msgstr ""
4943
4944 # type: Plain text
4945 #. type: Plain text
4946 #: debconf-devel.7:127
4947 msgid "A true/false choice."
4948 msgstr ""
4949
4950 # type: TP
4951 #. type: TP
4952 #: debconf-devel.7:127
4953 #, fuzzy, no-wrap
4954 msgid "B<select>"
4955 msgstr "B<File>"
4956
4957 # type: Plain text
4958 #. type: Plain text
4959 #: debconf-devel.7:132
4960 msgid ""
4961 "A choice between one of a number of values. The choices must be specified in "
4962 "a field named 'Choices'. Separate the possible values with commas and "
4963 "spaces, like this:"
4964 msgstr ""
4965
4966 # type: Plain text
4967 #. type: Plain text
4968 #: debconf-devel.7:134
4969 #, no-wrap
4970 msgid " Choices: yes, no, maybe\n"
4971 msgstr ""
4972
4973 # type: TP
4974 #. type: TP
4975 #: debconf-devel.7:135
4976 #, no-wrap
4977 msgid "B<multiselect>"
4978 msgstr ""
4979
4980 # type: Plain text
4981 #. type: Plain text
4982 #: debconf-devel.7:139
4983 msgid ""
4984 "Like the select data type, except the user can choose any number of items "
4985 "from the choices list (or choose none of them)."
4986 msgstr ""
4987
4988 # type: TP
4989 #. type: TP
4990 #: debconf-devel.7:139
4991 #, fuzzy, no-wrap
4992 msgid "B<note>"
4993 msgstr "B<gnome>"
4994
4995 # type: Plain text
4996 #. type: Plain text
4997 #: debconf-devel.7:147
4998 msgid ""
4999 "Rather than being a question per se, this datatype indicates a note that can "
5000 "be displayed to the user. It should be used only for important notes that "
5001 "the user really should see, since debconf will go to great pains to make "
5002 "sure the user sees it; halting the install for them to press a key. It's "
5003 "best to use these only for warning about very serious problems, and the "
5004 "error datatype is often more suitable."
5005 msgstr ""
5006
5007 # type: TP
5008 #. type: TP
5009 #: debconf-devel.7:147
5010 #, fuzzy, no-wrap
5011 msgid "B<error>"
5012 msgstr "B<editor>"
5013
5014 # type: Plain text
5015 #. type: Plain text
5016 #: debconf-devel.7:152
5017 msgid ""
5018 "This datatype is used for error messages, such as input validation errors. "
5019 "Debconf will show a question of this type even if the priority is too high "
5020 "or the user has already seen it."
5021 msgstr ""
5022
5023 # type: TP
5024 #. type: TP
5025 #: debconf-devel.7:152
5026 #, fuzzy, no-wrap
5027 msgid "B<title>"
5028 msgstr "B<File>"
5029
5030 # type: Plain text
5031 #. type: Plain text
5032 #: debconf-devel.7:155
5033 msgid "This datatype is used for titles, to be set with the SETTITLE command."
5034 msgstr ""
5035
5036 # type: TP
5037 #. type: TP
5038 #: debconf-devel.7:155
5039 #, fuzzy, no-wrap
5040 msgid "B<text>"
5041 msgstr "B<editor>"
5042
5043 # type: Plain text
5044 #. type: Plain text
5045 #: debconf-devel.7:162
5046 msgid ""
5047 "This datatype can be used for fragments of text, such as labels, that can be "
5048 "used for cosmetic reasons in the displays of some frontends. Other frontends "
5049 "will not use it at all. There is no point in using this datatype yet, since "
5050 "no frontends support it well. It may even be removed in the future."
5051 msgstr ""
5052
5053 # type: Plain text
5054 #. type: TP
5055 #: debconf-devel.7:163
5056 #, fuzzy, no-wrap
5057 msgid "B<Default>"
5058 msgstr "B<Debug>"
5059
5060 # type: Plain text
5061 #. type: Plain text
5062 #: debconf-devel.7:171
5063 msgid ""
5064 "The 'Default' field tells debconf what the default value should be. For "
5065 "multiselect, it can be a list of choices, separated by commas and spaces, "
5066 "similar to the 'Choices' field. For select, it should be one of the choices. "
5067 "For boolean, it is \"true\" or \"false\", while it can be anything for a "
5068 "string, and it is ignored for passwords."
5069 msgstr ""
5070
5071 # type: Plain text
5072 #. type: Plain text
5073 #: debconf-devel.7:178
5074 msgid ""
5075 "Don't make the mistake of thinking that the default field contains the "
5076 "\"value\" of the question, or that it can be used to change the value of the "
5077 "question. It does not, and cannot, it just provides a default value for the "
5078 "first time the question is displayed. To provide a default that changes on "
5079 "the fly, you'd have to use the SET command to change the value of a question."
5080 msgstr ""
5081
5082 # type: TP
5083 #. type: TP
5084 #: debconf-devel.7:179
5085 #, fuzzy, no-wrap
5086 msgid "B<Description>"
5087 msgstr "B<crítica>"
5088
5089 # type: Plain text
5090 #. type: Plain text
5091 #: debconf-devel.7:187
5092 msgid ""
5093 "The 'Description' field, like the description of a Debian package, has two "
5094 "parts: A short description and an extended description. Note that some "
5095 "debconf frontends don't display the long description, or might only display "
5096 "it if the user asks for help. So the short description should be able to "
5097 "stand on its own."
5098 msgstr ""
5099
5100 # type: Plain text
5101 #. type: Plain text
5102 #: debconf-devel.7:193
5103 msgid ""
5104 "If you can't think up a long description, then first, think some more. Post "
5105 "to debian-devel. Ask for help. Take a writing class! That extended "
5106 "description is important. If after all that you still can't come up with "
5107 "anything, leave it blank. There is no point in duplicating the short "
5108 "description."
5109 msgstr ""
5110
5111 #. type: Plain text
5112 #: debconf-devel.7:198
5113 msgid ""
5114 "Text in the extended description will be word-wrapped, unless it is prefixed "
5115 "by additional whitespace (beyond the one required space). You can break it "
5116 "up into separate paragraphs by putting \" .\" on a line by itself between "
5117 "them."
5118 msgstr ""
5119
5120 # type: =head1
5121 #. type: SH
5122 #: debconf-devel.7:199
5123 #, fuzzy, no-wrap
5124 msgid "QUESTIONS"
5125 msgstr "OPÇÕES"
5126
5127 # type: Plain text
5128 #. type: Plain text
5129 #: debconf-devel.7:211
5130 msgid ""
5131 "A question is an instantiated template. By asking debconf to display a "
5132 "question, your config script can interact with the user. When debconf loads "
5133 "a templates file (this happens whenever a config or postinst script is run), "
5134 "it automatically instantiates a question from each template. It is actually "
5135 "possible to instantiate several independent questions from the same template "
5136 "(using the REGISTER command), but that is rarely necessary. Templates are "
5137 "static data that comes from the templates file, while questions are used to "
5138 "store dynamic data, like the current value of the question, whether a user "
5139 "has seen a question, and so on. Keep the distinction between a template and "
5140 "a question in mind, but don't worry too much about it."
5141 msgstr ""
5142
5143 # type: SH
5144 #. type: SH
5145 #: debconf-devel.7:211
5146 #, no-wrap
5147 msgid "SHARED TEMPLATES"
5148 msgstr ""
5149
5150 # type: Plain text
5151 #. type: Plain text
5152 #: debconf-devel.7:218
5153 msgid ""
5154 "It's actually possible to have a template and a question that are shared "
5155 "among a set of packages. All the packages have to provide an identical copy "
5156 "of the template in their templates files. This can be useful if a bunch of "
5157 "packages need to ask the same question, and you only want to bother the user "
5158 "with it once. Shared templates are generally put in the shared/ pseudo-"
5159 "directory in the debconf template namespace."
5160 msgstr ""
5161
5162 # type: SH
5163 #. type: SH
5164 #: debconf-devel.7:218
5165 #, no-wrap
5166 msgid "THE DEBCONF PROTOCOL"
5167 msgstr ""
5168
5169 # type: Plain text
5170 #. type: Plain text
5171 #: debconf-devel.7:224
5172 msgid ""
5173 "Config scripts communicate with debconf using the debconf protocol. This is "
5174 "a simple line-oriented protocol, similar to common internet protocols such "
5175 "as SMTP. The config script sends debconf a command by writing the command to "
5176 "standard output. Then it can read debconf's reply from standard input."
5177 msgstr ""
5178
5179 # type: Plain text
5180 #. type: Plain text
5181 #: debconf-devel.7:230
5182 msgid ""
5183 "Debconf's reply can be broken down into two parts: A numeric result code "
5184 "(the first word of the reply), and an optional extended result code (the "
5185 "remainder of the reply). The numeric code uses 0 to indicate success, and "
5186 "other numbers to indicate various kinds of failure. For full details, see "
5187 "the table in Debian policy's debconf specification document."
5188 msgstr ""
5189
5190 # type: Plain text
5191 #. type: Plain text
5192 #: debconf-devel.7:235
5193 msgid ""
5194 "The extended return code is generally free form and unspecified, so you "
5195 "should generally ignore it, and should certainly not try to parse it in a "
5196 "program to work out what debconf is doing. The exception is commands like "
5197 "GET, that cause a value to be returned in the extended return code."
5198 msgstr ""
5199
5200 # type: Plain text
5201 #. type: Plain text
5202 #: debconf-devel.7:239
5203 msgid ""
5204 "Generally you'll want to use a language-specific library that handles the "
5205 "nuts and bolts of setting up these connections to debconf and communicating "
5206 "with it."
5207 msgstr ""
5208
5209 # type: Plain text
5210 #. type: Plain text
5211 #: debconf-devel.7:242
5212 msgid ""
5213 "For now, here are the commands in the protocol. This is not the definitive "
5214 "definition, see Debian policy's debconf specification document for that."
5215 msgstr ""
5216
5217 # type: TP
5218 #. type: TP
5219 #: debconf-devel.7:242
5220 #, no-wrap
5221 msgid "B<VERSION number>"
5222 msgstr ""
5223
5224 # type: Plain text
5225 #. type: Plain text
5226 #: debconf-devel.7:250
5227 msgid ""
5228 "You generally don't need to use this command. It exchanges with debconf the "
5229 "protocol version number that is being used. The current protocol version is "
5230 "2.0, and versions in the 2.x series will be backwards-compatible. You may "
5231 "specify the protocol version number you are speaking and debconf will return "
5232 "the version of the protocol it speaks in the extended result code. If the "
5233 "version you specify is too low, debconf will reply with numeric code 30."
5234 msgstr ""
5235
5236 # type: TP
5237 #. type: TP
5238 #: debconf-devel.7:250
5239 #, no-wrap
5240 msgid "B<CAPB capabilities>"
5241 msgstr ""
5242
5243 #. type: Plain text
5244 #: debconf-devel.7:257
5245 msgid ""
5246 "You generally don't need to use this command. It exchanges with debconf a "
5247 "list of supported capabilities (separated by spaces). Capabilities that both "
5248 "you and debconf support will be used, and debconf will reply with all the "
5249 "capabilities it supports."
5250 msgstr ""
5251
5252 # type: Plain text
5253 #. type: Plain text
5254 #: debconf-devel.7:267
5255 msgid ""
5256 "If 'escape' is found among your capabilities, debconf will expect commands "
5257 "you send it to have backslashes and newlines escaped (as \\e\\e and \\en "
5258 "respectively) and will in turn escape backslashes and newlines in its "
5259 "replies. This can be used, for example, to substitute multi-line strings "
5260 "into templates, or to get multi-line extended descriptions reliably using "
5261 "METAGET. In this mode, you must escape input text yourself (you can use "
5262 "B<debconf-escape>(1) to help with this if you want), but the confmodule "
5263 "libraries will unescape replies for you."
5264 msgstr ""
5265
5266 # type: TP
5267 #. type: TP
5268 #: debconf-devel.7:268
5269 #, no-wrap
5270 msgid "B<SETTITLE question>"
5271 msgstr ""
5272
5273 #. type: Plain text
5274 #: debconf-devel.7:275
5275 msgid ""
5276 "This sets the title debconf displays to the user, using the short "
5277 "description of the template for the specified question. The template should "
5278 "be of type title. You rarely need to use this command since debconf can "
5279 "automatically generate a title based on your package's name."
5280 msgstr ""
5281
5282 #. type: Plain text
5283 #: debconf-devel.7:278
5284 msgid ""
5285 "Setting the title from a template means they are stored in the same place as "
5286 "the rest of the debconf questions, and allows them to be translated."
5287 msgstr ""
5288
5289 # type: TP
5290 #. type: TP
5291 #: debconf-devel.7:279
5292 #, no-wrap
5293 msgid "B<TITLE string>"
5294 msgstr ""
5295
5296 #. type: Plain text
5297 #: debconf-devel.7:284
5298 msgid ""
5299 "This sets the title debconf displays to the user to the specified string. "
5300 "Use of the SETTITLE command is normally to be preferred as it allows for "
5301 "translation of the title."
5302 msgstr ""
5303
5304 # type: TP
5305 #. type: TP
5306 #: debconf-devel.7:284
5307 #, no-wrap
5308 msgid "B<INPUT priority question>"
5309 msgstr ""
5310
5311 # type: Plain text
5312 #. type: Plain text
5313 #: debconf-devel.7:291
5314 msgid ""
5315 "Ask debconf to prepare to display a question to the user. The question is "
5316 "not actually displayed until a GO command is issued; this lets several INPUT "
5317 "commands be given in series, to build up a set of questions, which might all "
5318 "be asked on a single screen."
5319 msgstr ""
5320
5321 # type: Plain text
5322 #. type: Plain text
5323 #: debconf-devel.7:294
5324 msgid ""
5325 "The priority field tells debconf how important it is that this question be "
5326 "shown to the user. The priority values are:"
5327 msgstr ""
5328
5329 # type: Plain text
5330 #. type: Plain text
5331 #: debconf-devel.7:298
5332 #, fuzzy
5333 msgid ""
5334 "Very trivial items that have defaults that will work in the vast majority of "
5335 "cases; only control freaks see these."
5336 msgstr ""
5337 "Qestões bem triviais que possuem respostas padrão que funcionarão para a "
5338 "grande maioria dos casos."
5339
5340 # type: Plain text
5341 #. type: Plain text
5342 #: debconf-devel.7:301
5343 #, fuzzy
5344 msgid "Normal items that have reasonable defaults."
5345 msgstr "Questões normais que possuem respostas padrão razoáveis."
5346
5347 # type: Plain text
5348 #. type: Plain text
5349 #: debconf-devel.7:304
5350 #, fuzzy
5351 msgid "Items that don't have a reasonable default."
5352 msgstr "Questões que não possuem uma resposta padrão razoável."
5353
5354 # type: Plain text
5355 #. type: Plain text
5356 #: debconf-devel.7:307
5357 #, fuzzy
5358 msgid "Items that will probably break the system without user intervention."
5359 msgstr ""
5360 "Para coisas que provavelmente quebrarão seu sistema sem intervenção do "
5361 "usuário."
5362
5363 # type: Plain text
5364 #. type: Plain text
5365 #: debconf-devel.7:312
5366 msgid ""
5367 "Debconf decides if the question is actually displayed, based on its "
5368 "priority, and whether the user has seen it before, and which frontend is "
5369 "being used. If the question will not be displayed, debconf replies with code "
5370 "30."
5371 msgstr ""
5372
5373 # type: TP
5374 #. type: TP
5375 #: debconf-devel.7:313
5376 #, fuzzy, no-wrap
5377 msgid "B<GO>"
5378 msgstr "B<*>"
5379
5380 # type: Plain text
5381 #. type: Plain text
5382 #: debconf-devel.7:318
5383 msgid ""
5384 "Tells debconf to display the accumulated set of questions (from INPUT "
5385 "commands) to the user."
5386 msgstr ""
5387
5388 # type: Plain text
5389 #. type: Plain text
5390 #: debconf-devel.7:321
5391 msgid ""
5392 "If the backup capability is supported and the user indicates they want to "
5393 "back up a step, debconf replies with code 30."
5394 msgstr ""
5395
5396 # type: TP
5397 #. type: TP
5398 #: debconf-devel.7:322
5399 #, no-wrap
5400 msgid "B<CLEAR>"
5401 msgstr ""
5402
5403 # type: Plain text
5404 #. type: Plain text
5405 #: debconf-devel.7:326
5406 msgid ""
5407 "Clears the accumulated set of questions (from INPUT commands) without "
5408 "displaying them."
5409 msgstr ""
5410
5411 # type: TP
5412 #. type: TP
5413 #: debconf-devel.7:326
5414 #, no-wrap
5415 msgid "B<BEGINBLOCK>"
5416 msgstr ""
5417
5418 # type: TP
5419 #. type: TP
5420 #: debconf-devel.7:328
5421 #, no-wrap
5422 msgid "B<ENDBLOCK>"
5423 msgstr ""
5424
5425 # type: Plain text
5426 #. type: Plain text
5427 #: debconf-devel.7:336
5428 msgid ""
5429 "Some debconf frontends can display a number of questions to the user at "
5430 "once. Maybe in the future a frontend will even be able to group these "
5431 "questions into blocks on screen. BEGINBLOCK and ENDBLOCK can be placed "
5432 "around a set of INPUT commands to indicate blocks of questions (and blocks "
5433 "can even be nested). Since no debconf frontend is so sophisticated yet, "
5434 "these commands are ignored for now."
5435 msgstr ""
5436
5437 # type: TP
5438 #. type: TP
5439 #: debconf-devel.7:336
5440 #, no-wrap
5441 msgid "B<STOP>"
5442 msgstr ""
5443
5444 # type: Plain text
5445 #. type: Plain text
5446 #: debconf-devel.7:340
5447 msgid ""
5448 "This command tells debconf that you're done talking to it. Often debconf can "
5449 "detect termination of your program and this command is not necessary."
5450 msgstr ""
5451
5452 # type: TP
5453 #. type: TP
5454 #: debconf-devel.7:340
5455 #, fuzzy, no-wrap
5456 msgid "B<GET question>"
5457 msgstr "B<Extension>"
5458
5459 # type: Plain text
5460 #. type: Plain text
5461 #: debconf-devel.7:345
5462 msgid ""
5463 "After using INPUT and GO to display a question, you can use this command to "
5464 "get the value the user entered. The value is returned in the extended result "
5465 "code."
5466 msgstr ""
5467
5468 # type: TP
5469 #. type: TP
5470 #: debconf-devel.7:345
5471 #, no-wrap
5472 msgid "B<SET question value>"
5473 msgstr ""
5474
5475 # type: Plain text
5476 #. type: Plain text
5477 #: debconf-devel.7:349
5478 msgid ""
5479 "This sets the value of a question, and it can be used to override the "
5480 "default value with something your program calculates on the fly."
5481 msgstr ""
5482
5483 # type: TP
5484 #. type: TP
5485 #: debconf-devel.7:349
5486 #, fuzzy, no-wrap
5487 msgid "B<RESET question>"
5488 msgstr "B<Extension>"
5489
5490 # type: Plain text
5491 #. type: Plain text
5492 #: debconf-devel.7:353
5493 msgid ""
5494 "This resets the question to its default value (as is specified in the "
5495 "'Default' field of its template)."
5496 msgstr ""
5497
5498 # type: TP
5499 #. type: TP
5500 #: debconf-devel.7:353
5501 #, no-wrap
5502 msgid "B<SUBST question key value>"
5503 msgstr ""
5504
5505 # type: Plain text
5506 #. type: Plain text
5507 #: debconf-devel.7:362
5508 msgid ""
5509 "Questions can have substitutions embedded in their 'Description' and "
5510 "'Choices' fields (use of substitutions in 'Choices' fields is a bit of a "
5511 "hack though; a better mechanism will eventually be developed). These "
5512 "substitutions look like \"${key}\". When the question is displayed, the "
5513 "substitutions are replaced with their values. This command can be used to "
5514 "set the value of a substitution. This is useful if you need to display some "
5515 "message to the user that you can't hard-code in the templates file."
5516 msgstr ""
5517
5518 # type: Plain text
5519 #. type: Plain text
5520 #: debconf-devel.7:365
5521 msgid ""
5522 "Do not try to use SUBST to change the default value of a question; it won't "
5523 "work since there is a SET command explicitly for that purpose."
5524 msgstr ""
5525
5526 # type: TP
5527 #. type: TP
5528 #: debconf-devel.7:365
5529 #, no-wrap
5530 msgid "B<FGET question flag>"
5531 msgstr ""
5532
5533 # type: Plain text
5534 #. type: Plain text
5535 #: debconf-devel.7:369
5536 msgid ""
5537 "Questions can have flags associated with them. The flags can have a value of "
5538 "\"true\" or \"false\". This command returns the value of a flag."
5539 msgstr ""
5540
5541 # type: TP
5542 #. type: TP
5543 #: debconf-devel.7:369
5544 #, no-wrap
5545 msgid "B<FSET question flag value>"
5546 msgstr ""
5547
5548 # type: Plain text
5549 #. type: Plain text
5550 #: debconf-devel.7:374
5551 msgid ""
5552 "This sets the value of a question's flag. The value must be either \"true\" "
5553 "or \"false\"."
5554 msgstr ""
5555
5556 # type: Plain text
5557 #. type: Plain text
5558 #: debconf-devel.7:380
5559 msgid ""
5560 "One common flag is the \"seen\" flag. It is normally only set if a user has "
5561 "already seen a question. Debconf usually only displays questions to users if "
5562 "they have the seen flag set to \"false\" (or if it is reconfiguring a "
5563 "package). Sometimes you want the user to see a question again -- in these "
5564 "cases you can set the seen flag to false to force debconf to redisplay it."
5565 msgstr ""
5566
5567 # type: TP
5568 #. type: TP
5569 #: debconf-devel.7:381
5570 #, no-wrap
5571 msgid "B<METAGET question field>"
5572 msgstr ""
5573
5574 # type: Plain text
5575 #. type: Plain text
5576 #: debconf-devel.7:385
5577 msgid ""
5578 "This returns the value of any field of a question's associated template (the "
5579 "Description, for example)."
5580 msgstr ""
5581
5582 # type: TP
5583 #. type: TP
5584 #: debconf-devel.7:385
5585 #, no-wrap
5586 msgid "B<REGISTER template question>"
5587 msgstr ""
5588
5589 # type: Plain text
5590 #. type: Plain text
5591 #: debconf-devel.7:391
5592 msgid ""
5593 "This creates a new question that is bound to a template. By default each "
5594 "template has an associated question with the same name. However, any number "
5595 "of questions can really be associated with a template, and this lets you "
5596 "create more such questions."
5597 msgstr ""
5598
5599 # type: TP
5600 #. type: TP
5601 #: debconf-devel.7:391
5602 #, no-wrap
5603 msgid "B<UNREGISTER question>"
5604 msgstr ""
5605
5606 # type: Plain text
5607 #. type: Plain text
5608 #: debconf-devel.7:394
5609 msgid "This removes a question from the database."
5610 msgstr ""
5611
5612 # type: TP
5613 #. type: TP
5614 #: debconf-devel.7:394
5615 #, no-wrap
5616 msgid "B<PURGE>"
5617 msgstr ""
5618
5619 # type: Plain text
5620 #. type: Plain text
5621 #: debconf-devel.7:398
5622 msgid ""
5623 "Call this in your postrm when your package is purged. It removes all of your "
5624 "package's questions from debconf's database."
5625 msgstr ""
5626
5627 # type: TP
5628 #. type: TP
5629 #: debconf-devel.7:398
5630 #, no-wrap
5631 msgid "B<X_LOADTEMPLATEFILE /path/to/templates [owner]>"
5632 msgstr ""
5633
5634 #. type: Plain text
5635 #: debconf-devel.7:402
5636 msgid ""
5637 "This extension loads the specified template file into debconf's database. "
5638 "The owner defaults to the package that is being configured with debconf."
5639 msgstr ""
5640
5641 # type: textblock
5642 #. type: Plain text
5643 #: debconf-devel.7:404
5644 #, fuzzy
5645 msgid "Here is a simple example of the debconf protocol in action."
5646 msgstr "Imprime o valor da questão do debconf/frontend."
5647
5648 # type: Plain text
5649 #. type: Plain text
5650 #: debconf-devel.7:418
5651 #, no-wrap
5652 msgid ""
5653 " INPUT medium debconf/frontend\n"
5654 " 30 question skipped\n"
5655 " FSET debconf/frontend seen false\n"
5656 " 0 false\n"
5657 " INPUT high debconf/frontend\n"
5658 " 0 question will be asked\n"
5659 " GO\n"
5660 " [ Here debconf displays a question to the user. ]\n"
5661 " 0 ok\n"
5662 " GET no/such/question\n"
5663 " 10 no/such/question doesn't exist\n"
5664 " GET debconf/frontend\n"
5665 " 0 Dialog\n"
5666 msgstr ""
5667
5668 # type: SH
5669 #. type: SH
5670 #: debconf-devel.7:418
5671 #, no-wrap
5672 msgid "LIBRARIES"
5673 msgstr ""
5674
5675 # type: Plain text
5676 #. type: Plain text
5677 #: debconf-devel.7:422
5678 msgid ""
5679 "Setting things up so you can talk to debconf, and speaking the debconf "
5680 "protocol by hand is a little too much work, so some thin libraries exist to "
5681 "relieve this minor drudgery."
5682 msgstr ""
5683
5684 #. type: Plain text
5685 #: debconf-devel.7:430
5686 msgid ""
5687 "For shell programming, there is the /usr/share/debconf/confmodule library, "
5688 "which you can source at the top of a shell script, and talk to debconf in a "
5689 "fairly natural way, using lower-case versions of the debconf protocol "
5690 "commands, that are prefixed with \"db_\" (ie, \"db_input\" and \"db_go\"). "
5691 "For details, see B<confmodule>(3) ."
5692 msgstr ""
5693
5694 #. type: Plain text
5695 #: debconf-devel.7:434
5696 msgid ""
5697 "Perl programmers can use the B<Debconf::Client::ConfModule>(3pm) perl "
5698 "module, and python programmers can use the debconf python module."
5699 msgstr ""
5700
5701 # type: Plain text
5702 #. type: Plain text
5703 #: debconf-devel.7:438
5704 msgid ""
5705 "The rest of this manual will use the /usr/share/debconf/confmodule library "
5706 "in example shell scripts. Here is an example config script using that "
5707 "library, that just asks a question:"
5708 msgstr ""
5709
5710 # type: Plain text
5711 #. type: Plain text
5712 #: debconf-devel.7:445
5713 #, fuzzy, no-wrap
5714 msgid ""
5715 " #!/bin/sh\n"
5716 " set -e\n"
5717 " . /usr/share/debconf/confmodule\n"
5718 " db_set mypackage/reboot-now false\n"
5719 " db_input high mypackage/reboot-now || true\n"
5720 " db_go || true\n"
5721 msgstr ""
5722 " #!/bin/sh -e\n"
5723 " . /usr/share/debconf/confmodule\n"
5724 " db_version 2.0\n"
5725 " db_capb 'backup'\n"
5726 " CAPB=$RET\n"
5727 " db_input 'foo/bar' || true\n"
5728 " db_go || true\n"
5729
5730 # type: Plain text
5731 #. type: Plain text
5732 #: debconf-devel.7:450
5733 msgid ""
5734 "Notice the uses of \"|| true\" to prevent the script from dying if debconf "
5735 "decides it can't display a question, or the user tries to back up. In those "
5736 "situations, debconf returns a non-zero exit code, and since this shell "
5737 "script is set -e, an untrapped exit code would make it abort."
5738 msgstr ""
5739
5740 # type: Plain text
5741 #. type: Plain text
5742 #: debconf-devel.7:454
5743 msgid ""
5744 "And here is a corresponding postinst script, that uses the user's answer to "
5745 "the question to see if the system should be rebooted (a rather absurd "
5746 "example..):"
5747 msgstr ""
5748
5749 # type: Plain text
5750 #. type: Plain text
5751 #: debconf-devel.7:462
5752 #, no-wrap
5753 msgid ""
5754 " #!/bin/sh\n"
5755 " set -e\n"
5756 " . /usr/share/debconf/confmodule\n"
5757 " db_get mypackage/reboot-now\n"
5758 " if [ \"$RET\" = true ]; then\n"
5759 " \tshutdown -r now\n"
5760 " fi\n"
5761 msgstr ""
5762
5763 # type: Plain text
5764 #. type: Plain text
5765 #: debconf-devel.7:465
5766 msgid ""
5767 "Notice the use of the $RET variable to get at the extended return code from "
5768 "the GET command, which holds the user's answer to the question."
5769 msgstr ""
5770
5771 # type: SH
5772 #. type: SH
5773 #: debconf-devel.7:465
5774 #, no-wrap
5775 msgid "THE POSTINST SCRIPT"
5776 msgstr ""
5777
5778 # type: Plain text
5779 #. type: Plain text
5780 #: debconf-devel.7:469
5781 msgid ""
5782 "The last section had an example of a postinst script that uses debconf to "
5783 "get the value of a question, and act on it. Here are some things to keep in "
5784 "mind when writing postinst scripts that use debconf:"
5785 msgstr ""
5786
5787 # type: Plain text
5788 #. type: Plain text
5789 #: debconf-devel.7:473
5790 msgid ""
5791 "Avoid asking questions in the postinst. Instead, the config script should "
5792 "ask questions using debconf, so that pre-configuration will work."
5793 msgstr ""
5794
5795 # type: Plain text
5796 #. type: Plain text
5797 #: debconf-devel.7:479
5798 msgid ""
5799 "Always source /usr/share/debconf/confmodule at the top of your postinst, "
5800 "even if you won't be running any db_* commands in it. This is required to "
5801 "make sure the config script gets a chance to run (see HACKS for details)."
5802 msgstr ""
5803
5804 # type: Plain text
5805 #. type: Plain text
5806 #: debconf-devel.7:484
5807 msgid ""
5808 "Avoid outputting anything to stdout in your postinst, since that can confuse "
5809 "debconf, and postinst should not be verbose anyway. Output to stderr is ok, "
5810 "if you must."
5811 msgstr ""
5812
5813 # type: Plain text
5814 #. type: Plain text
5815 #: debconf-devel.7:489
5816 msgid ""
5817 "If your postinst launches a daemon, make sure you tell debconf to STOP at "
5818 "the end, since debconf can become a little confused about when your postinst "
5819 "is done otherwise."
5820 msgstr ""
5821
5822 # type: Plain text
5823 #. type: Plain text
5824 #: debconf-devel.7:494
5825 msgid ""
5826 "Make your postinst script accept a first parameter of \"reconfigure\". It "
5827 "can treat it just like \"configure\". This will be used in a later version "
5828 "of debconf to let postinsts know when they are reconfigured."
5829 msgstr ""
5830
5831 # type: SH
5832 #. type: SH
5833 #: debconf-devel.7:494
5834 #, no-wrap
5835 msgid "OTHER SCRIPTS"
5836 msgstr ""
5837
5838 #. type: Plain text
5839 #: debconf-devel.7:502
5840 msgid ""
5841 "Besides the config script and postinst, you can use debconf in any of the "
5842 "other maintainer scripts. Most commonly, you'll be using debconf in your "
5843 "postrm, to call the PURGE command when your package is purged, to clean out "
5844 "its entries in the debconf database. (This is automatically set up for you "
5845 "by B<dh_installdebconf>(1)B<,> by the way.)"
5846 msgstr ""
5847
5848 # type: Plain text
5849 #. type: Plain text
5850 #: debconf-devel.7:510
5851 msgid ""
5852 "A more involved use of debconf would be if you want to use it in the postrm "
5853 "when your package is purged, to ask a question about deleting something. Or "
5854 "maybe you find you need to use it in the preinst or prerm for some reason. "
5855 "All of these uses will work, though they'll probably involve asking "
5856 "questions and acting on the answers in the same program, rather than "
5857 "separating the two activities as is done in the config and postinst scripts."
5858 msgstr ""
5859
5860 # type: Plain text
5861 #. type: Plain text
5862 #: debconf-devel.7:515
5863 msgid ""
5864 "Note that if your package's sole use of debconf is in the postrm, you should "
5865 "make your package's postinst source /usr/share/debconf/confmodule, to give "
5866 "debconf a chance to load up your templates file into its database. Then the "
5867 "templates will be available when your package is being purged."
5868 msgstr ""
5869
5870 # type: Plain text
5871 #. type: Plain text
5872 #: debconf-devel.7:522
5873 msgid ""
5874 "You can also use debconf in other, standalone programs. The issue to watch "
5875 "out for here is that debconf is not intended to be, and must not be used as "
5876 "a registry. This is unix after all, and programs are configured by files in /"
5877 "etc, not by some nebulous debconf database (that is only a cache anyway and "
5878 "might get blown away). So think long and hard before using debconf in a "
5879 "standalone program."
5880 msgstr ""
5881
5882 # type: Plain text
5883 #. type: Plain text
5884 #: debconf-devel.7:527
5885 msgid ""
5886 "There are times when it can make sense, as in the apt-setup program which "
5887 "uses debconf to prompt the user in a manner consistent with the rest of the "
5888 "debian install process, and immediately acts on their answers to set up "
5889 "apt's sources.list."
5890 msgstr ""
5891
5892 # type: SH
5893 #. type: SH
5894 #: debconf-devel.7:527
5895 #, no-wrap
5896 msgid "LOCALIZATION"
5897 msgstr ""
5898
5899 # type: Plain text
5900 #. type: Plain text
5901 #: debconf-devel.7:534
5902 msgid ""
5903 "Debconf supports localization of templates files. This is accomplished by "
5904 "adding more fields, with translated text in them. Any of the fields can be "
5905 "translated. For example, you might want to translate the description into "
5906 "Spanish. Just make a field named 'Description-es' that holds the "
5907 "translation. If a translated field is not available, debconf falls back to "
5908 "the normal English field."
5909 msgstr ""
5910
5911 # type: Plain text
5912 #. type: Plain text
5913 #: debconf-devel.7:540
5914 msgid ""
5915 "Besides the 'Description' field, you should translate the 'Choices' field of "
5916 "a select or multiselect template. Be sure to list the translated choices in "
5917 "the same order as they appear in the main 'Choices' field. You do not need "
5918 "to translate the 'Default' field of a select or multiselect question, and "
5919 "the value of the question will be automatically returned in English."
5920 msgstr ""
5921
5922 # type: Plain text
5923 #. type: Plain text
5924 #: debconf-devel.7:552
5925 msgid ""
5926 "You will find it easier to manage translations if you keep them in separate "
5927 "files; one file per translation. In the past, the B<debconf-getlang>(1) and "
5928 "B<debconf-mergetemplate>(1) programs were used to manage debian/template.ll "
5929 "files. This has been superseded by the B<po-debconf>(7) package, which lets "
5930 "you deal with debconf translations in .po files, just like any other "
5931 "translations. Your translators will thank you for using this new improved "
5932 "mechanism."
5933 msgstr ""
5934
5935 # type: Plain text
5936 #. type: Plain text
5937 #: debconf-devel.7:558
5938 msgid ""
5939 "For the details on po-debconf, see its man page. If you're using debhelper, "
5940 "converting to po-debconf is as simple as running the B<debconf-"
5941 "gettextize>(1) command once, and adding a Build-Dependency on po-debconf "
5942 "and on debhelper (E<gt>= 4.1.13)."
5943 msgstr ""
5944
5945 # type: SH
5946 #. type: SH
5947 #: debconf-devel.7:558
5948 #, no-wrap
5949 msgid "PUTTING IT ALL TOGETHER"
5950 msgstr ""
5951
5952 # type: Plain text
5953 #. type: Plain text
5954 #: debconf-devel.7:568
5955 msgid ""
5956 "So you have a config script, a templates file, a postinst script that uses "
5957 "debconf, and so on. Putting these pieces together into a debian package "
5958 "isn't hard. You can do it by hand, or can use B<dh_installdebconf>(1) which "
5959 "will merge your translated templates, copy the files into the right places "
5960 "for you, and can even generate the call to PURGE that should go in your "
5961 "postrm script. Make sure that your package depends on debconf (E<gt>= 0.5), "
5962 "since earlier versions were not compatible with everything described in this "
5963 "manual. And you're done."
5964 msgstr ""
5965
5966 # type: Plain text
5967 #. type: Plain text
5968 #: debconf-devel.7:571
5969 msgid ""
5970 "Well, except for testing, debugging, and actually using debconf for more "
5971 "interesting things than asking a few basic questions. For that, read on.."
5972 msgstr ""
5973
5974 # type: SH
5975 #. type: SH
5976 #: debconf-devel.7:571
5977 #, no-wrap
5978 msgid "DEBUGGING"
5979 msgstr ""
5980
5981 # type: Plain text
5982 #. type: Plain text
5983 #: debconf-devel.7:576
5984 msgid ""
5985 "So you have a package that's supposed to use debconf, but it doesn't quite "
5986 "work. Maybe debconf is just not asking that question you set up. Or maybe "
5987 "something weirder is happening; it spins forever in some kind of loop, or "
5988 "worse. Luckily, debconf has plenty of debugging facilities."
5989 msgstr ""
5990
5991 # type: Plain text
5992 #. type: Plain text
5993 #: debconf-devel.7:583
5994 msgid ""
5995 "The first thing to reach for is the DEBCONF_DEBUG environment variable. If "
5996 "you set and export DEBCONF_DEBUG=developer, debconf will output to stderr a "
5997 "dump of the debconf protocol as your program runs. It'll look something like "
5998 "this -- the typo is made clear:"
5999 msgstr ""
6000
6001 # type: Plain text
6002 #. type: Plain text
6003 #: debconf-devel.7:588
6004 #, no-wrap
6005 msgid ""
6006 " debconf (developer): E<lt>-- input high debconf/frontand\n"
6007 " debconf (developer): --E<gt> 10 \"debconf/frontand\" doesn't exist\n"
6008 " debconf (developer): E<lt>-- go\n"
6009 " debconf (developer): --E<gt> 0 ok\n"
6010 msgstr ""
6011
6012 # type: Plain text
6013 #. type: Plain text
6014 #: debconf-devel.7:592
6015 msgid ""
6016 "It's rather useful to use debconf's readline frontend when you're debugging "
6017 "(in the author's opinion), as the questions don't get in the way, and all "
6018 "the debugging output is easily preserved and logged."
6019 msgstr ""
6020
6021 # type: TP
6022 #. type: TP
6023 #: debconf-devel.7:593
6024 #, fuzzy, no-wrap
6025 msgid "B<DEBCONF_C_VALUES>"
6026 msgstr "B<DEBCONF_TERSE>"
6027
6028 #. type: Plain text
6029 #: debconf-devel.7:599
6030 msgid ""
6031 "If this environment variable is set to 'true', the frontend will display the "
6032 "values in Choices-C fields (if present) of select and multiselect templates "
6033 "rather than the descriptive values."
6034 msgstr ""
6035
6036 # type: textblock
6037 #. type: TP
6038 #: debconf-devel.7:600
6039 #, fuzzy, no-wrap
6040 msgid "B<debconf-communicate>"
6041 msgstr "L<debconf-communicate(1)>"
6042
6043 # type: Plain text
6044 #. type: Plain text
6045 #: debconf-devel.7:606
6046 msgid ""
6047 "Another useful tool is the B<debconf-communicate>(1) program. Fire it up "
6048 "and you can speak the raw debconf protocol to debconf, interactively. This "
6049 "is a great way to try stuff out on the fly."
6050 msgstr ""
6051
6052 # type: textblock
6053 #. type: TP
6054 #: debconf-devel.7:606
6055 #, fuzzy, no-wrap
6056 msgid "B<debconf-show>"
6057 msgstr "debconf-show"
6058
6059 # type: Plain text
6060 #. type: Plain text
6061 #: debconf-devel.7:612
6062 msgid ""
6063 "If a user is reporting a problem, B<debconf-show>(1) can be used to dump "
6064 "out all the questions owned by your package, displaying their values and "
6065 "whether the user has seen them."
6066 msgstr ""
6067
6068 # type: Plain text
6069 #. type: TP
6070 #: debconf-devel.7:612
6071 #, fuzzy, no-wrap
6072 msgid "B<.debconfrc>"
6073 msgstr "~/.debconfrc"
6074
6075 # type: Plain text
6076 #. type: Plain text
6077 #: debconf-devel.7:623
6078 msgid ""
6079 "To avoid the often tedious build/install/debug cycle, it can be useful to "
6080 "load up your templates with B<debconf-loadtemplate>(1) and run your config "
6081 "script by hand with the B<debconf>(1) command. However, you still have to "
6082 "do that as root, right? Not so good. And ideally you'd like to be able to "
6083 "see what a fresh installation of your package looks like, with a clean "
6084 "debconf database."
6085 msgstr ""
6086
6087 # type: Plain text
6088 #. type: Plain text
6089 #: debconf-devel.7:629
6090 msgid ""
6091 "It turns out that if you set up a ~/.debconfrc file for a normal user, "
6092 "pointing at a personal config.dat and template.dat for the user, you can "
6093 "load up templates and run config scripts all you like, without any root "
6094 "access. If you want to start over with a clean database, just blow away the "
6095 "*.dat files."
6096 msgstr ""
6097
6098 # type: Plain text
6099 #. type: Plain text
6100 #: debconf-devel.7:634
6101 msgid ""
6102 "For details about setting this up, see B<debconf.conf>(5)B<,> and note that /"
6103 "etc/debconf.conf makes a good template for a personal ~/.debconfrc file."
6104 msgstr ""
6105
6106 # type: SH
6107 #. type: SH
6108 #: debconf-devel.7:635
6109 #, no-wrap
6110 msgid "ADVANCED PROGRAMMING WITH DEBCONF"
6111 msgstr ""
6112
6113 # type: SS
6114 #. type: SS
6115 #: debconf-devel.7:636
6116 #, no-wrap
6117 msgid "Config file handling"
6118 msgstr ""
6119
6120 # type: Plain text
6121 #. type: Plain text
6122 #: debconf-devel.7:643
6123 msgid ""
6124 "Many of you seem to want to use debconf to help manage config files that are "
6125 "part of your package. Perhaps there is no good default to ship in a "
6126 "conffile, and so you want to use debconf to prompt the user, and write out a "
6127 "config file based on their answers. That seems easy enough to do, but then "
6128 "you consider upgrades, and what to do when someone modifies the config file "
6129 "you generate, and dpkg-reconfigure, and ..."
6130 msgstr ""
6131
6132 # type: Plain text
6133 #. type: Plain text
6134 #: debconf-devel.7:651
6135 msgid ""
6136 "There are a lot of ways to do this, and most of them are wrong, and will "
6137 "often earn you annoyed bug reports. Here is one right way to do it. It "
6138 "assumes that your config file is really just a series of shell variables "
6139 "being set, with comments in between, and so you can just source the file to "
6140 "\"load\" it. If you have a more complicated format, reading (and writing) "
6141 "it becomes a bit trickier."
6142 msgstr ""
6143
6144 # type: Plain text
6145 #. type: Plain text
6146 #: debconf-devel.7:653
6147 msgid "Your config script will look something like this:"
6148 msgstr ""
6149
6150 # type: Plain text
6151 #. type: Plain text
6152 #: debconf-devel.7:658 debconf-devel.7:680
6153 #, no-wrap
6154 msgid ""
6155 " #!/bin/sh\n"
6156 " CONFIGFILE=/etc/foo.conf\n"
6157 " set -e\n"
6158 " . /usr/share/debconf/confmodule\n"
6159 msgstr ""
6160
6161 # type: Plain text
6162 #. type: Plain text
6163 #: debconf-devel.7:662
6164 #, no-wrap
6165 msgid ""
6166 " # Load config file, if it exists.\n"
6167 " if [ -e $CONFIGFILE ]; then\n"
6168 " \t. $CONFIGFILE || true\n"
6169 msgstr ""
6170
6171 # type: Plain text
6172 #. type: Plain text
6173 #: debconf-devel.7:668
6174 #, no-wrap
6175 msgid ""
6176 " \t# Store values from config file into\n"
6177 " \t# debconf db.\n"
6178 " \tdb_set mypackage/foo \"$FOO\"\n"
6179 " \tdb_set mypackage/bar \"$BAR\"\n"
6180 " fi\n"
6181 msgstr ""
6182
6183 # type: Plain text
6184 #. type: Plain text
6185 #: debconf-devel.7:673
6186 #, no-wrap
6187 msgid ""
6188 " # Ask questions.\n"
6189 " db_input medium mypackage/foo || true\n"
6190 " db_input medium mypackage/bar || true\n"
6191 " db_go || true\n"
6192 msgstr ""
6193
6194 # type: Plain text
6195 #. type: Plain text
6196 #: debconf-devel.7:675
6197 msgid "And the postinst will look something like this:"
6198 msgstr ""
6199
6200 # type: Plain text
6201 #. type: Plain text
6202 #: debconf-devel.7:689
6203 #, no-wrap
6204 msgid ""
6205 " # Generate config file, if it doesn't exist.\n"
6206 " # An alternative is to copy in a template\n"
6207 " # file from elsewhere.\n"
6208 " if [ ! -e $CONFIGFILE ]; then\n"
6209 " \techo \"# Config file for my package\" E<gt> $CONFIGFILE\n"
6210 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6211 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6212 " fi\n"
6213 msgstr ""
6214
6215 # type: Plain text
6216 #. type: Plain text
6217 #: debconf-devel.7:699
6218 #, no-wrap
6219 msgid ""
6220 " # Substitute in the values from the debconf db.\n"
6221 " # There are obvious optimizations possible here.\n"
6222 " # The cp before the sed ensures we do not mess up\n"
6223 " # the config file's ownership and permissions.\n"
6224 " db_get mypackage/foo\n"
6225 " FOO=\"$RET\"\n"
6226 " db_get mypackage/bar\n"
6227 " BAR=\"$RET\"\n"
6228 " cp -a -f $CONFIGFILE $CONFIGFILE.tmp\n"
6229 msgstr ""
6230
6231 # type: Plain text
6232 #. type: Plain text
6233 #: debconf-devel.7:706
6234 #, no-wrap
6235 msgid ""
6236 " # If the admin deleted or commented some variables but then set\n"
6237 " # them via debconf, (re-)add them to the conffile.\n"
6238 " test -z \"$FOO\" || grep -Eq '^ *FOO=' $CONFIGFILE || \\e\n"
6239 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6240 " test -z \"$BAR\" || grep -Eq '^ *BAR=' $CONFIGFILE || \\e\n"
6241 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6242 msgstr ""
6243
6244 # type: Plain text
6245 #. type: Plain text
6246 #: debconf-devel.7:711
6247 #, no-wrap
6248 msgid ""
6249 " sed -e \"s/^ *FOO=.*/FOO=\\e\"$FOO\\e\"/\" \\e\n"
6250 " -e \"s/^ *BAR=.*/BAR=\\e\"$BAR\\e\"/\" \\e\n"
6251 " E<lt> $CONFIGFILE E<gt> $CONFIGFILE.tmp\n"
6252 " mv -f $CONFIGFILE.tmp $CONFIGFILE\n"
6253 msgstr ""
6254
6255 # type: Plain text
6256 #. type: Plain text
6257 #: debconf-devel.7:719
6258 msgid ""
6259 "Consider how these two scripts handle all the cases. On fresh installs the "
6260 "questions are asked by the config script, and a new config file generated by "
6261 "the postinst. On upgrades and reconfigures, the config file is read in, and "
6262 "the values in it are used to change the values in the debconf database, so "
6263 "the admin's manual changes are not lost. The questions are asked again (and "
6264 "may or may not be displayed). Then the postinst substitutes the values back "
6265 "into the config file, leaving the rest of it unchanged."
6266 msgstr ""
6267
6268 # type: SS
6269 #. type: SS
6270 #: debconf-devel.7:719
6271 #, no-wrap
6272 msgid "Letting the user back up"
6273 msgstr ""
6274
6275 # type: Plain text
6276 #. type: Plain text
6277 #: debconf-devel.7:725
6278 msgid ""
6279 "Few things are more frustrating when using a system like debconf than being "
6280 "asked a question, and answering it, then moving on to another screen with a "
6281 "new question on it, and realizing that hey, you made a mistake, with that "
6282 "last question, and you want to go back to it, and discovering that you can't."
6283 msgstr ""
6284
6285 # type: Plain text
6286 #. type: Plain text
6287 #: debconf-devel.7:731
6288 msgid ""
6289 "Since debconf is driven by your config script, it can't jump back to a "
6290 "previous question on its own but with a little help from you, it can "
6291 "accomplish this feat. The first step is to make your config script let "
6292 "debconf know it is capable of handling the user pressing a back button. You "
6293 "use the CAPB command to do this, passing backup as a parameter."
6294 msgstr ""
6295
6296 # type: Plain text
6297 #. type: Plain text
6298 #: debconf-devel.7:735
6299 msgid ""
6300 "Then after each GO command, you must test to see if the user asked to back "
6301 "up (debconf returns a code of 30), and if so jump back to the previous "
6302 "question."
6303 msgstr ""
6304
6305 # type: Plain text
6306 #. type: Plain text
6307 #: debconf-devel.7:741
6308 msgid ""
6309 "There are several ways to write the control structures of your program so it "
6310 "can jump back to previous questions when necessary. You can write goto-laden "
6311 "spaghetti code. Or you can create several functions and use recursion. But "
6312 "perhaps the cleanest and easiest way is to construct a state machine. Here "
6313 "is a skeleton of a state machine that you can fill out and expand."
6314 msgstr ""
6315
6316 # type: Plain text
6317 #. type: Plain text
6318 #: debconf-devel.7:746
6319 #, fuzzy, no-wrap
6320 msgid ""
6321 " #!/bin/sh\n"
6322 " set -e\n"
6323 " . /usr/share/debconf/confmodule\n"
6324 " db_capb backup\n"
6325 msgstr ""
6326 " #!/bin/sh -e\n"
6327 " . /usr/share/debconf/confmodule\n"
6328 " db_version 2.0\n"
6329 " db_capb 'backup'\n"
6330 " CAPB=$RET\n"
6331 " db_input 'foo/bar' || true\n"
6332 " db_go || true\n"
6333
6334 # type: Plain text
6335 #. type: Plain text
6336 #: debconf-devel.7:773
6337 #, no-wrap
6338 msgid ""
6339 " STATE=1\n"
6340 " while true; do\n"
6341 " \tcase \"$STATE\" in\n"
6342 " \t1)\n"
6343 " \t\t# Two unrelated questions.\n"
6344 " \t\tdb_input medium my/question || true\n"
6345 " \t\tdb_input medium my/other_question || true\n"
6346 " \t;;\n"
6347 " \t2)\n"
6348 " \t\t# Only ask this question if the\n"
6349 " \t\t# first question was answered in\n"
6350 " \t\t# the affirmative.\n"
6351 " \tdb_get my/question\n"
6352 " \t\tif [ \"$RET\" = \"true\" ]; then\n"
6353 " \t\t\tdb_input medium my/dep_question || true\n"
6354 " \t\tfi\n"
6355 " \t;;\n"
6356 " \t*)\n"
6357 " \t\t# The default case catches when $STATE is greater than the\n"
6358 " \t\t# last implemented state, and breaks out of the loop. This\n"
6359 " \t\t# requires that states be numbered consecutively from 1\n"
6360 " \t\t# with no gaps, as the default case will also be entered\n"
6361 " \t\t# if there is a break in the numbering\n"
6362 " \t\tbreak # exits the enclosing \"while\" loop\n"
6363 " \t;;\n"
6364 " \tesac\n"
6365 msgstr ""
6366
6367 # type: Plain text
6368 #. type: Plain text
6369 #: debconf-devel.7:780
6370 #, no-wrap
6371 msgid ""
6372 " \tif db_go; then\n"
6373 " \t\tSTATE=$((STATE + 1))\n"
6374 " \telse\n"
6375 " \t\tSTATE=$((STATE - 1))\n"
6376 " \tfi\n"
6377 " done\n"
6378 msgstr ""
6379
6380 # type: Plain text
6381 #. type: Plain text
6382 #: debconf-devel.7:791
6383 #, no-wrap
6384 msgid ""
6385 " if [ $STATE -eq 0 ]; then\n"
6386 " \t# The user has asked to back up from the first\n"
6387 " \t# question. This case is problematical. Regular\n"
6388 " \t# dpkg and apt package installation isn't capable\n"
6389 " \t# of backing up questions between packages as this\n"
6390 " \t# is written, so this will exit leaving the package\n"
6391 " \t# unconfigured - probably the best way to handle\n"
6392 " \t# the situation.\n"
6393 " \texit 10\n"
6394 " fi\n"
6395 msgstr ""
6396
6397 # type: Plain text
6398 #. type: Plain text
6399 #: debconf-devel.7:796
6400 msgid ""
6401 "Note that if all your config script does is ask a few unrelated questions, "
6402 "then there is no need for the state machine. Just ask them all, and GO; "
6403 "debconf will do its best to present them all in one screen, and the user "
6404 "won't need to back up."
6405 msgstr ""
6406
6407 # type: SS
6408 #. type: SS
6409 #: debconf-devel.7:796
6410 #, no-wrap
6411 msgid "Preventing infinite loops"
6412 msgstr ""
6413
6414 #. type: Plain text
6415 #: debconf-devel.7:800
6416 msgid ""
6417 "One gotcha with debconf comes up if you have a loop in your config script. "
6418 "Suppose you're asking for input and validating it, and looping if it's not "
6419 "valid:"
6420 msgstr ""
6421
6422 # type: Plain text
6423 #. type: Plain text
6424 #: debconf-devel.7:810
6425 #, no-wrap
6426 msgid ""
6427 " ok=''\n"
6428 " do while [ ! \"$ok\" ];\n"
6429 " \tdb_input low foo/bar || true\n"
6430 " \tdb_go || true\n"
6431 " \tdb_get foo/bar\n"
6432 " \tif [ \"$RET\" ]; then\n"
6433 " \t\tok=1\n"
6434 " \tfi\n"
6435 " done\n"
6436 msgstr ""
6437
6438 # type: Plain text
6439 #. type: Plain text
6440 #: debconf-devel.7:817
6441 msgid ""
6442 "This looks ok at first glance. But consider what happens if the value of foo/"
6443 "bar is \"\" when this loop is entered, and the user has their priority set "
6444 "high, or is using a non-interactive frontend, and so they are not really "
6445 "asked for input. The value of foo/bar is not changed by the db_input, and so "
6446 "it fails the test and loops. And loops ..."
6447 msgstr ""
6448
6449 # type: Plain text
6450 #. type: Plain text
6451 #: debconf-devel.7:823
6452 msgid ""
6453 "One fix for this is to make sure that before the loop is entered, the value "
6454 "of foo/bar is set to something that will pass the test in the loop. So for "
6455 "example if the default value of foo/bar is \"1\", then you could RESET foo/"
6456 "bar just before entering the loop."
6457 msgstr ""
6458
6459 # type: Plain text
6460 #. type: Plain text
6461 #: debconf-devel.7:827
6462 msgid ""
6463 "Another fix is to check the return code of the INPUT command. If it is 30 "
6464 "then the user is not being shown the question you asked them, and you should "
6465 "break out of the loop."
6466 msgstr ""
6467
6468 # type: SS
6469 #. type: SS
6470 #: debconf-devel.7:827
6471 #, no-wrap
6472 msgid "Choosing among related packages"
6473 msgstr ""
6474
6475 # type: Plain text
6476 #. type: Plain text
6477 #: debconf-devel.7:832
6478 msgid ""
6479 "Sometimes a set of related packages can be installed, and you want to prompt "
6480 "the user which of the set should be used by default. Examples of such sets "
6481 "are window managers, or ispell dictionary files."
6482 msgstr ""
6483
6484 # type: Plain text
6485 #. type: Plain text
6486 #: debconf-devel.7:838
6487 msgid ""
6488 "While it would be possible for each package in the set to simply prompt, "
6489 "\"Should this package be default?\", this leads to a lot of repetitive "
6490 "questions if several of the packages are installed. It's possible with "
6491 "debconf to present a list of all the packages in the set and allow the user "
6492 "to choose between them. Here's how."
6493 msgstr ""
6494
6495 # type: Plain text
6496 #. type: Plain text
6497 #: debconf-devel.7:841
6498 msgid ""
6499 "Make all the packages in the set use a shared template. Something like this:"
6500 msgstr ""
6501
6502 # type: Plain text
6503 #. type: Plain text
6504 #: debconf-devel.7:848
6505 #, no-wrap
6506 msgid ""
6507 " Template: shared/window-manager\n"
6508 " Type: select\n"
6509 " Choices: ${choices}\n"
6510 " Description: Select the default window manager.\n"
6511 " Select the window manager that will be started by\n"
6512 " default when X starts.\n"
6513 msgstr ""
6514
6515 # type: Plain text
6516 #. type: Plain text
6517 #: debconf-devel.7:851
6518 msgid ""
6519 "Each package should include a copy of the template. Then it should include "
6520 "some code like this in its config script:"
6521 msgstr ""
6522
6523 # type: Plain text
6524 #. type: Plain text
6525 #: debconf-devel.7:856
6526 #, no-wrap
6527 msgid ""
6528 " db_metaget shared/window-manager owners\n"
6529 " OWNERS=$RET\n"
6530 " db_metaget shared/window-manager choices\n"
6531 " CHOICES=$RET\n"
6532 msgstr ""
6533
6534 # type: Plain text
6535 #. type: Plain text
6536 #: debconf-devel.7:861
6537 #, no-wrap
6538 msgid ""
6539 " if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
6540 " \tdb_subst shared/window-manager choices $OWNERS\n"
6541 " \tdb_fset shared/window-manager seen false\n"
6542 " fi\n"
6543 msgstr ""
6544
6545 # type: Plain text
6546 #. type: Plain text
6547 #: debconf-devel.7:864
6548 #, no-wrap
6549 msgid ""
6550 " db_input medium shared/window-manager || true\n"
6551 " db_go || true\n"
6552 msgstr ""
6553
6554 # type: Plain text
6555 #. type: Plain text
6556 #: debconf-devel.7:872
6557 msgid ""
6558 "A bit of an explanation is called for. By the time your config script runs, "
6559 "debconf has already read in all the templates for the packages that are "
6560 "being installed. Since the set of packages share a question, debconf records "
6561 "that fact in the owners field. By a strange coincidence, the format of the "
6562 "owners field is the same as that of the choices field (a comma and space "
6563 "delimited list of values)."
6564 msgstr ""
6565
6566 # type: Plain text
6567 #. type: Plain text
6568 #: debconf-devel.7:877
6569 msgid ""
6570 "The METAGET command can be used to get the list of owners and the list of "
6571 "choices. If they are different, then a new package has been installed. So "
6572 "use the SUBST command to change the list of choices to be the same as the "
6573 "list of owners, and ask the question."
6574 msgstr ""
6575
6576 # type: Plain text
6577 #. type: Plain text
6578 #: debconf-devel.7:881
6579 msgid ""
6580 "When a package is removed, you probably want to see if that package is the "
6581 "currently selected choice, and if so, prompt the user to select a different "
6582 "package to replace it."
6583 msgstr ""
6584
6585 # type: Plain text
6586 #. type: Plain text
6587 #: debconf-devel.7:885
6588 msgid ""
6589 "This can be accomplished by adding something like this to the prerm scripts "
6590 "of all related packages (replacing E<lt>packageE<gt> with the package name):"
6591 msgstr ""
6592
6593 # type: Plain text
6594 #. type: Plain text
6595 #: debconf-devel.7:890
6596 #, no-wrap
6597 msgid ""
6598 " if [ -e /usr/share/debconf/confmodule ]; then\n"
6599 " \t. /usr/share/debconf/confmodule\n"
6600 " \t# I no longer claim this question.\n"
6601 " \tdb_unregister shared/window-manager\n"
6602 msgstr ""
6603
6604 #. type: Plain text
6605 #: debconf-devel.7:901
6606 #, no-wrap
6607 msgid ""
6608 " \t# See if the shared question still exists.\n"
6609 " \tif db_get shared/window-manager; then\n"
6610 " \t\tdb_metaget shared/window-manager owners\n"
6611 " \t\tdb_subst shared/window-manager choices $RET\n"
6612 " \t\tdb_metaget shared/window-manager value\n"
6613 " \t\tif [ \"E<lt>packageE<gt>\" = \"$RET\" ] ; then\n"
6614 " \t\t\tdb_fset shared/window-manager seen false\n"
6615 " \t\t\tdb_input high shared/window-manager || true\n"
6616 " \t\t\tdb_go || true\n"
6617 " \t\tfi\n"
6618 msgstr ""
6619
6620 # type: Plain text
6621 #. type: Plain text
6622 #: debconf-devel.7:906
6623 #, no-wrap
6624 msgid ""
6625 " \t\t# Now do whatever the postinst script did\n"
6626 " \t\t# to update the window manager symlink.\n"
6627 " \tfi\n"
6628 " fi\n"
6629 msgstr ""
6630
6631 # type: SH
6632 #. type: SH
6633 #: debconf-devel.7:906
6634 #, no-wrap
6635 msgid "HACKS"
6636 msgstr ""
6637
6638 # type: Plain text
6639 #. type: Plain text
6640 #: debconf-devel.7:909
6641 msgid ""
6642 "Debconf is currently not fully integrated into dpkg (but I want to change "
6643 "this in the future), and so some messy hacks are currently called for."
6644 msgstr ""
6645
6646 # type: Plain text
6647 #. type: Plain text
6648 #: debconf-devel.7:920
6649 msgid ""
6650 "The worst of these involves getting the config script to run. The way that "
6651 "works now is the config script will be run when the package is pre-"
6652 "configured. Then, when the postinst script runs, it starts up debconf again. "
6653 "Debconf notices it is being used by the postinst script, and so it goes off "
6654 "and runs the config script. This can only work if your postinst loads up one "
6655 "of the debconf libraries though, so postinsts always have to take care to do "
6656 "that. We hope to address this later by adding explicit support to dpkg for "
6657 "debconf. The B<debconf>(1) program is a step in this direction."
6658 msgstr ""
6659
6660 # type: Plain text
6661 #. type: Plain text
6662 #: debconf-devel.7:931
6663 msgid ""
6664 "A related hack is getting debconf running when a config script, postinst, or "
6665 "other program that uses it starts up. After all, they expect to be able to "
6666 "talk to debconf right away. The way this is accomplished for now is that "
6667 "when such a script loads a debconf library (like /usr/share/debconf/"
6668 "confmodule), and debconf is not already running, it is started up, and a new "
6669 "copy of the script is re-execed. The only noticeable result is that you need "
6670 "to put the line that loads a debconf library at the very top of the script, "
6671 "or weird things will happen. We hope to address this later by changing how "
6672 "debconf is invoked, and turning it into something more like a transient "
6673 "daemon."
6674 msgstr ""
6675
6676 # type: Plain text
6677 #. type: Plain text
6678 #: debconf-devel.7:942
6679 msgid ""
6680 "It's rather hackish how debconf figures out what templates files to load, "
6681 "and when it loads them. When the config, preinst, and postinst scripts "
6682 "invoke debconf, it will automatically figure out where the templates file "
6683 "is, and load it. Standalone programs that use debconf will cause debconf to "
6684 "look for templates files in /usr/share/debconf/templates/progname."
6685 "templates. And if a postrm wants to use debconf at purge time, the "
6686 "templates won't be available unless debconf had a chance to load them in its "
6687 "postinst. This is messy, but rather unavoidable. In the future some of these "
6688 "programs may be able to use debconf-loadtemplate by hand though."
6689 msgstr ""
6690
6691 # type: Plain text
6692 #. type: Plain text
6693 #: debconf-devel.7:950
6694 msgid ""
6695 "/usr/share/debconf/confmodule's historic behavior of playing with file "
6696 "descriptors and setting up a fd #3 that talks to debconf, can cause all "
6697 "sorts of trouble when a postinst runs a daemon, since the daemon ends up "
6698 "talking to debconf, and debconf can't figure out when the script terminates. "
6699 "The STOP command can work around this. In the future, we are considering "
6700 "making debconf communication happen over a socket or some other mechanism "
6701 "than stdio."
6702 msgstr ""
6703
6704 #. type: Plain text
6705 #: debconf-devel.7:958
6706 msgid ""
6707 "Debconf sets DEBCONF_RECONFIGURE=1 before running postinst scripts, so a "
6708 "postinst script that needs to avoid some expensive operation when "
6709 "reconfigured can look at that variable. This is a hack because the right "
6710 "thing would be to pass $1 = \"reconfigure\", but doing so without breaking "
6711 "all the postinsts that use debconf is difficult. The migration plan away "
6712 "from this hack is to encourage people to write postinsts that accept "
6713 "\"reconfigure\", and once they all do, begin passing that parameter."
6714 msgstr ""
6715
6716 # type: Plain text
6717 #. type: Plain text
6718 #: debconf-devel.7:961
6719 msgid "B<debconf>(7) is the debconf user's guide."
6720 msgstr ""
6721
6722 # type: Plain text
6723 #. type: Plain text
6724 #: debconf-devel.7:964
6725 msgid ""
6726 "The debconf specification in debian policy is the canonical definition of "
6727 "the debconf protocol. /usr/share/doc/debian-policy/debconf_specification.txt."
6728 "gz"
6729 msgstr ""
6730
6731 # type: Plain text
6732 #. type: Plain text
6733 #: debconf-devel.7:968
6734 msgid ""
6735 "B<debconf.conf>(5) has much useful information, including some info about "
6736 "the backend database."
6737 msgstr ""
6738
6739 # type: =item
6740 #, fuzzy
6741 #~ msgid "B<-a>, B<--all>"
6742 #~ msgstr "B<-h>, B<--help>"
6743
6744 # type: textblock
6745 #~ msgid ""
6746 #~ "Reconfigure all installed packages that use debconf. Warning: this may "
6747 #~ "take a long time."
6748 #~ msgstr ""
6749 #~ "Reconfigura todos os pacotes instalados que usam debconf. Aviso: isso "
6750 #~ "pode levar bastante tempo."
6751
6752 # type: textblock
6753 #, fuzzy
6754 #~ msgid "debconf-get-selections"
6755 #~ msgstr "L<debconf-getlang(1)>"
6756
6757 # type: Plain text
6758 #~ msgid "Joey Hess E<lt>[email protected]<gt>"
6759 #~ msgstr "Joey Hess E<lt>[email protected]<gt>"
6760
6761 # type: Plain text
6762 #~ msgid ""
6763 #~ "This database driver is the same as the DirTree driver, except all the "
6764 #~ "files are put in one directory. It is intended mainly for future "
6765 #~ "compatibility with cdebconf. Also, unlike with DirTree, the Extension "
6766 #~ "field is not required for this driver."
6767 #~ msgstr ""
6768 #~ "Este controlador de base de dados é o mesmo que o controlador DirTree, "
6769 #~ "exceto que todos os arquivos são colocados em um diretório. Isto é "
6770 #~ "destinado principalmente para futura compatibilidade com o cdebconf. "
6771 #~ "Adiconalmente, diferente do DirTree, o campo Extension não é requerido "
6772 #~ "para este controlador."
6773
6774 # type: Plain text
6775 #~ msgid "File descriptor number to write to. Defaults to writing to stdout."
6776 #~ msgstr ""
6777 #~ "Número do descritor de arquivo para o qual gravar. O padrão é gravar na "
6778 #~ "saída padrão (stdout)."
6779
6780 # type: Plain text
6781 #~ msgid ""
6782 #~ "Note that some of the drivers and formats in this example do not exist. "
6783 #~ "Feel free to write them!"
6784 #~ msgstr ""
6785 #~ "Note que alguns dos controladores e formatos neste exemplo não existem. "
6786 #~ "Sinta-se livre para escrevê-los!"
6787
6788 # type: Plain text
6789 #~ msgid ""
6790 #~ " # This special driver provides a few items\n"
6791 #~ " # from dhcp.\n"
6792 #~ " Name: dhcp\n"
6793 #~ " Driver: DHCP\n"
6794 #~ " Required: false\n"
6795 #~ " Reject-Type: password\n"
6796 #~ msgstr ""
6797 #~ " # Este controlador especial oferece alguns\n"
6798 #~ "\t# items do dhcp.\n"
6799 #~ " Name: dhcp\n"
6800 #~ " Driver: DHCP\n"
6801 #~ " Required: false\n"
6802 #~ " Reject-Type: password\n"
6803
6804 # type: textblock
6805 #~ msgid "Joey Hess <[email protected]>"
6806 #~ msgstr "Joey Hess <[email protected]>"
6807
6808 # type: verbatim
6809 #~ msgid ""
6810 #~ " debconf-show packagename\n"
6811 #~ "\n"
6812 #~ msgstr ""
6813 #~ " debconf-show nome-do-pacote\n"
6814 #~ "\n"
6815
6816 # type: textblock
6817 #~ msgid ""
6818 #~ "This has the same effect as re-installing the package, basically. I hope "
6819 #~ "one day this will be called by dpkg --reconfigure"
6820 #~ msgstr ""
6821 #~ "Isto têm o mesmo efeito de reinstalar o pacote, basicamente. Espero que "
6822 #~ "um dia isso seja chamado por dpkg --reconfigure"