Debian Codegraph @

doc/man/po4a/po/es.po

raw
1 # debconf doc/man/po4a/po translation to Spanish
2 # Copyright (C) 2010, 2011 Software in the Public Interest
3 # This file is distributed under the same license as the debconf package.
4 #
5 # Changes:
6 # - Initial translation
7 # Omar Campagne <[email protected]>, 2010, 2011.
8 #
9 # - Updates
10 # TRANSLATOR
11 #
12 # Traductores, si no conocen el formato PO, merece la pena leer la
13 # documentación de gettext, especialmente las secciones dedicadas a este
14 # formato, por ejemplo ejecutando:
15 # info -n '(gettext)PO Files'
16 # info -n '(gettext)Header Entry'
17 #
18 # Equipo de traducción al español, por favor lean antes de traducir
19 # los siguientes documentos:
20 #
21 # - El proyecto de traducción de Debian al español
22 # http://www.debian.org/intl/spanish/
23 # especialmente las notas y normas de traducción en
24 # http://www.debian.org/intl/spanish/notas
25 #
26 # - La guía de traducción de po's de debconf:
27 # /usr/share/doc/po-debconf/README-trans
28 # o http://www.debian.org/intl/l10n/po-debconf/README-trans
29 #
30 msgid ""
31 msgstr ""
32 "Project-Id-Version: debconf 1.5.41\n"
33 "POT-Creation-Date: 2024-01-21 19:23+0000\n"
34 "PO-Revision-Date: 2011-08-02 11:03+0200\n"
35 "Last-Translator: Omar Campagne <[email protected]>\n"
36 "Language-Team: Debian l10n Spanish <[email protected]>\n"
37 "Language: es\n"
38 "MIME-Version: 1.0\n"
39 "Content-Type: text/plain; charset=UTF-8\n"
40 "Content-Transfer-Encoding: 8bit\n"
41 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
42 "X-Generator: Virtaal 0.7.0\n"
43
44 #. type: SH
45 #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3
46 #: ../../debconf-apt-progress:3 ../../debconf-escape:3
47 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3
48 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3
49 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3
50 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3
51 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2
52 #, no-wrap
53 msgid "NAME"
54 msgstr "NOMBRE"
55
56 #. type: textblock
57 #: ../../debconf:5
58 msgid "debconf - run a debconf-using program"
59 msgstr "debconf - Ejecuta un programa que hace uso de debconf"
60
61 #. type: SH
62 #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7
63 #: ../../debconf-apt-progress:7 ../../debconf-escape:7
64 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16
65 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14
66 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7
67 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7
68 #: debconf.conf.5:12 confmodule.3:4
69 #, no-wrap
70 msgid "SYNOPSIS"
71 msgstr "SINOPSIS"
72
73 #. type: verbatim
74 #: ../../debconf:11
75 #, no-wrap
76 msgid ""
77 " debconf [options] command [args]\n"
78 "\n"
79 msgstr ""
80 " debconf [opciones] orden [argumentos]\n"
81 "\n"
82
83 #. type: SH
84 #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20
85 #: ../../debconf-apt-progress:15 ../../debconf-escape:12
86 #: ../../debconf-communicate:13 ../../debconf-copydb:30
87 #: ../../debconf-getlang:21 ../../debconf-get-selections:11
88 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21
89 #: ../../debconf-set-selections:12 ../../debconf-show:13
90 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4
91 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4
92 #, no-wrap
93 msgid "DESCRIPTION"
94 msgstr "DESCRIPCIÓN"
95
96 #. type: textblock
97 #: ../../debconf:15
98 msgid ""
99 "Debconf is a configuration system for Debian packages. For a debconf "
100 "overview and documentation for sysadmins, see L<debconf(7)> (in the debconf-"
101 "doc package)."
102 msgstr ""
103 "Debconf es un sistema de configuración para paquetes de Debian. Consulte "
104 "L<debconf(7)> (en el paquete debconf-doc) para una visión general de debconf "
105 "y la documentación para administradores de sistemas."
106
107 #. type: textblock
108 #: ../../debconf:19
109 msgid ""
110 "The B<debconf> program runs a program under debconf's control, setting it up "
111 "to talk with debconf on stdio. The program's output is expected to be "
112 "debconf protocol commands, and it is expected to read result codes on stdin. "
113 "See L<debconf-devel(7)> for details about the debconf protocol."
114 msgstr ""
115 "El programa B<debconf> ejecuta un programa bajo el control de debconf, "
116 "haciendo que se comunique con debconf por la entrada y salida estándar. Se "
117 "espera que la salida del programa sean órdenes del protocolo de debconf, y "
118 "también que lea los códigos resultantes por la entrada estándar. Para más "
119 "detalles acerca del protocolo de debconf consulte L<debconf-devel(7)>."
120
121 #. type: textblock
122 #: ../../debconf:24
123 msgid ""
124 "The command to be run under debconf must be specified in a way that will let "
125 "your PATH find it."
126 msgstr ""
127 "La orden a ejecutar bajo debconf debe estar definida de manera que esté "
128 "incluida dentro de la variable «PATH»."
129
130 #. type: textblock
131 #: ../../debconf:27
132 msgid ""
133 "This command is not the usual way that debconf is used. It's more typical "
134 "for debconf to be used via L<dpkg-preconfigure(8)> or L<dpkg-reconfigure(8)>."
135 msgstr ""
136 "Esta orden no es la forma habitual de uso de debconf. Es más habitual "
137 "interactuar con debconf a través de L<dpkg-preconfigure(8)> o L<dpkg-"
138 "reconfigure(8)>."
139
140 #. type: =head1
141 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36
142 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56
143 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21
144 msgid "OPTIONS"
145 msgstr "OPCIONES"
146
147 #. type: =item
148 #: ../../debconf:34
149 msgid "B<-o>I<package>, B<--owner=>I<package>"
150 msgstr "B<-o>I<paquete>, B<--owner=>I<paquete>"
151
152 #. type: textblock
153 #: ../../debconf:36
154 msgid ""
155 "Tell debconf what package the command it is running is a part of. This is "
156 "necessary to get ownership of registered questions right, and to support "
157 "unregister and purge commands properly."
158 msgstr ""
159 "Informa a debconf del paquete al que pertenece la orden que está ejecutando. "
160 "Es necesario para obtener adecuadamente el propietario de las preguntas "
161 "registradas, y también gestionar adecuadamente las órdenes de purgar "
162 "(«purge») y borrar del registro («unregister»)."
163
164 #. type: =item
165 #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25
166 msgid "B<-f>I<type>, B<--frontend=>I<type>"
167 msgstr "B<-f>I<tipo>, B<--frontend=>I<tipo>"
168
169 #. type: textblock
170 #: ../../debconf:42 ../../dpkg-preconfigure:26
171 msgid "Select the frontend to use."
172 msgstr "Selecciona la interfaz a usar."
173
174 #. type: =item
175 #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36
176 msgid "B<-p>I<value>, B<--priority=>I<value>"
177 msgstr "B<-p>I<valor>, B<--priority=>I<valor>"
178
179 #. type: textblock
180 #: ../../debconf:46
181 msgid "Specify the minimum priority of question that will be displayed."
182 msgstr "Define la prioridad mínima de las preguntas que se mostrarán."
183
184 #. type: =item
185 #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42
186 msgid "B<--terse>"
187 msgstr "B<--terse>"
188
189 #. type: textblock
190 #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44
191 msgid "Enables terse output mode. This affects only some frontends."
192 msgstr ""
193 "Activa el modo de salida abreviado. Esto sólo afecta a algunas interfaces."
194
195 #. type: =head1
196 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75
197 #: ../../debconf-set-selections:47
198 msgid "EXAMPLES"
199 msgstr "EJEMPLOS"
200
201 #. type: textblock
202 #: ../../debconf:56
203 msgid "To debug a shell script that uses debconf, you might use:"
204 msgstr ""
205 "Puede usar lo siguiente para depurar un script de intérprete de órdenes que "
206 "use debconf:"
207
208 #. type: verbatim
209 #: ../../debconf:58
210 #, no-wrap
211 msgid ""
212 " DEBCONF_DEBUG=developer debconf my-shell-prog\n"
213 "\n"
214 msgstr ""
215 " DEBCONF_DEBUG=developer debconf mi-script-de-consola\n"
216 "\n"
217
218 #. type: textblock
219 #: ../../debconf:60
220 msgid "Or, you might use this:"
221 msgstr "O puede usar lo siguiente:"
222
223 #. type: verbatim
224 #: ../../debconf:62
225 #, no-wrap
226 msgid ""
227 " debconf --frontend=readline sh -x my-shell-prog\n"
228 "\n"
229 msgstr ""
230 " debconf --frontend=readline sh -x mi-script-de-consola\n"
231 "\n"
232
233 #. type: SH
234 #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154
235 #: ../../debconf-escape:21 ../../debconf-communicate:39
236 #: ../../debconf-copydb:102 ../../debconf-getlang:74
237 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61
238 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59
239 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376
240 #: debconf-devel.7:958
241 #, no-wrap
242 msgid "SEE ALSO"
243 msgstr "VÉASE TAMBIÉN"
244
245 #. type: textblock
246 #: ../../debconf:66
247 msgid "L<debconf-devel(7)>, L<debconf(7)>"
248 msgstr "L<debconf-devel(7)>, L<debconf(7)>"
249
250 #. type: SH
251 #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159
252 #: ../../debconf-escape:72 ../../debconf-communicate:74
253 #: ../../debconf-copydb:175 ../../debconf-getlang:256
254 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48
255 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226
256 #: ../../debconf-show:152 ../../dpkg-preconfigure:258
257 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382
258 #: debconf-devel.7:968
259 #, no-wrap
260 msgid "AUTHOR"
261 msgstr "AUTOR"
262
263 #. type: textblock
264 #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161
265 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76
266 #: ../../debconf-copydb:177 ../../debconf-getlang:258
267 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183
268 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311
269 msgid "Joey Hess <[email protected]>"
270 msgstr "Joey Hess <[email protected]>"
271
272 #. type: textblock
273 #: ../../Debconf/Client/ConfModule.pm:5
274 msgid "Debconf::Client::ConfModule - client module for ConfModules"
275 msgstr "Debconf::Client::ConfModule - Módulo cliente para ConfModules"
276
277 #. type: verbatim
278 #: ../../Debconf/Client/ConfModule.pm:9
279 #, no-wrap
280 msgid ""
281 " use Debconf::Client::ConfModule ':all';\n"
282 " version('2.0');\n"
283 " my $capb=capb('backup');\n"
284 " input(\"medium\", \"foo/bar\");\n"
285 " my @ret=go();\n"
286 " if ($ret[0] == 30) {\n"
287 " \t# Back button pressed.\n"
288 " \t...\n"
289 " }\n"
290 " ...\n"
291 "\n"
292 msgstr ""
293 " use Debconf::Client::ConfModule ':all';\n"
294 " version('2.0');\n"
295 " my $capb=capb('backup');\n"
296 " input(\"medium\", \"foo/bar\");\n"
297 " my @ret=go();\n"
298 " if ($ret[0] == 30) {\n"
299 " \t# Back button pressed.\n"
300 " \t...\n"
301 " }\n"
302 " ...\n"
303 "\n"
304
305 #. type: textblock
306 #: ../../Debconf/Client/ConfModule.pm:22
307 msgid ""
308 "This is a module to ease writing ConfModules for Debian's configuration "
309 "management system. It can communicate with a FrontEnd via the debconf "
310 "protocol (which is documented in full in the debconf_specification in Debian "
311 "policy)."
312 msgstr ""
313 "Éste es un módulo que facilita escribir ConfModules para el sistema de "
314 "gestión de configuración de Debian. Se puede comunicar con una interfaz a "
315 "través del protocolo de debconf (documentado en «debconf_specification» en "
316 "el Manual de normas de Debian)."
317
318 #. type: textblock
319 #: ../../Debconf/Client/ConfModule.pm:27
320 msgid ""
321 "The design is that each command in the protocol is represented by one "
322 "function in this module (with the name lower-cased). Call the function and "
323 "pass in any parameters you want to follow the command. If the function is "
324 "called in scalar context, it will return any textual return code. If it is "
325 "called in list context, an array consisting of the numeric return code and "
326 "the textual return code will be returned."
327 msgstr ""
328 "El diseño es tal que cada orden en el protocolo se representa en este módulo "
329 "con una función (con el nombre en minúsculas). Invoque la función e "
330 "introduzca cualquier parámetro que desee que se inserte a continuación de la "
331 "orden. Si la función se invoca en un contexto escalable («scalar»), "
332 "devolverá cualquier código de retorno textual. Si se invoca en un contexto "
333 "de lista, se devolverá una serie compuesta del código de retorno numérico, "
334 "y el código de retorno textual."
335
336 #. type: textblock
337 #: ../../Debconf/Client/ConfModule.pm:34
338 msgid ""
339 "This module uses Exporter to export all functions it defines. To import "
340 "everything, simply import \":all\"."
341 msgstr ""
342 "Este módulo usa Exporter para exportar todas las funciones que define. Para "
343 "importarlo todo, simplemente importe «:all»."
344
345 #. type: =item
346 #: ../../Debconf/Client/ConfModule.pm:62
347 msgid "import"
348 msgstr "import"
349
350 #. type: textblock
351 #: ../../Debconf/Client/ConfModule.pm:64
352 msgid ""
353 "Ensure that a FrontEnd is running. It's a little hackish. If "
354 "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, "
355 "one is started up automatically and stdin and out are connected to it. Note "
356 "that this function is always run when the module is loaded in the usual way."
357 msgstr ""
358 "Comprueba que se está ejecutando una interfaz. Es un poco confuso. Si se "
359 "define «DEBIAN_HAS_FRONTEND», se asume que una interfaz está en ejecución. "
360 "De no ser así, uno se iniciará automáticamente y la entrada y salida "
361 "estándar se conectará a este. Tenga en cuenta que la función siempre se "
362 "ejecuta al cargar un módulo de la forma habitual."
363
364 #. type: =item
365 #: ../../Debconf/Client/ConfModule.pm:95
366 msgid "stop"
367 msgstr "stop"
368
369 #. type: textblock
370 #: ../../Debconf/Client/ConfModule.pm:97
371 msgid ""
372 "The frontend doesn't send a return code here, so we cannot try to read it or "
373 "we'll block."
374 msgstr ""
375 "En este caso, la interfaz no devuelve un código de retorno, así que no "
376 "podemos intentar leerlo o se bloqueará."
377
378 #. type: =item
379 #: ../../Debconf/Client/ConfModule.pm:107
380 msgid "AUTOLOAD"
381 msgstr "AUTOLOAD"
382
383 #. type: textblock
384 #: ../../Debconf/Client/ConfModule.pm:109
385 msgid "Creates handler functions for commands on the fly."
386 msgstr "Crea funciones «handler» para órdenes en el momento."
387
388 #. type: textblock
389 #: ../../Debconf/Client/ConfModule.pm:156
390 msgid ""
391 "The debconf specification (/usr/share/doc/debian-policy/"
392 "debconf_specification.txt.gz)."
393 msgstr ""
394 "La especificación de debconf (/usr/share/doc/debian-policy/"
395 "debconf_specification.txt.gz)."
396
397 #. type: textblock
398 #: ../../debconf-apt-progress:5
399 msgid ""
400 "debconf-apt-progress - install packages using debconf to display a progress "
401 "bar"
402 msgstr ""
403 "debconf-apt-progress - Instala paquetes usando debconf para mostrar una "
404 "barra de progreso"
405
406 #. type: verbatim
407 #: ../../debconf-apt-progress:9
408 #, no-wrap
409 msgid ""
410 " debconf-apt-progress [--] command [args ...]\n"
411 " debconf-apt-progress --config\n"
412 " debconf-apt-progress --start\n"
413 " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n"
414 " debconf-apt-progress --stop\n"
415 "\n"
416 msgstr ""
417 " debconf-apt-progress [--] orden [argumentos ...]\n"
418 " debconf-apt-progress --config\n"
419 " debconf-apt-progress --start\n"
420 " debconf-apt-progress --from punto-progreso --to punto-progreso [--]\n"
421 " orden [argumentos ...]\n"
422 " debconf-apt-progress --stop\n"
423 "\n"
424
425 #. type: textblock
426 #: ../../debconf-apt-progress:17
427 msgid ""
428 "B<debconf-apt-progress> installs packages using debconf to display a "
429 "progress bar. The given I<command> should be any command-line apt frontend; "
430 "specifically, it must send progress information to the file descriptor "
431 "selected by the C<APT::Status-Fd> configuration option, and must keep the "
432 "file descriptors nominated by the C<APT::Keep-Fds> configuration option open "
433 "when invoking debconf (directly or indirectly), as those file descriptors "
434 "will be used for the debconf passthrough protocol."
435 msgstr ""
436 "B<debconf-apt-progress> instala paquetes usando debconf para mostrar una "
437 "barra de progreso. La I<orden> dada debería ser cualquier orden de consola "
438 "de una interfaz de APT; específicamente, debe enviar información de progreso "
439 "al descriptor de fichero seleccionado con la opción de configuración C<APT::"
440 "Status-Fd>, y debe dejar abiertos los descriptores de ficheros mencionados "
441 "por la opción de configuración C<APT::Keep-Fds> al invocar debconf (directa "
442 "o indirectamente), ya que esos descriptores de fichero se usarán para el "
443 "protocolo de paso («passthrough») de debconf."
444
445 #. type: textblock
446 #: ../../debconf-apt-progress:25
447 msgid ""
448 "The arguments to the command you supply should generally include B<-y> (for "
449 "B<apt-get> or B<aptitude>) or similar to avoid the apt frontend prompting "
450 "for input. B<debconf-apt-progress> cannot do this itself because the "
451 "appropriate argument may differ between apt frontends."
452 msgstr ""
453 "Generalmente, los argumentos de la orden que introduzca deben incluir B<-y> "
454 "(con B<apt-get> o B<aptitude>), o similar para así evitar que la interfaz de "
455 "APT solicite la entrada de datos. B<debconf-apt-progress> no es capaz de "
456 "hacer esto por sí mismo ya que el argumento adecuado puede diferir según la "
457 "interfaz de APT."
458
459 #. type: textblock
460 #: ../../debconf-apt-progress:30
461 msgid ""
462 "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to "
463 "create a progress bar with multiple segments for different stages of "
464 "installation, provided that the caller is a debconf confmodule. The caller "
465 "may also interact with the progress bar itself using the debconf protocol if "
466 "it so desires."
467 msgstr ""
468 "Las opciones B<--start>, B<--stop>, B<--from> y B<--to> se pueden usar para "
469 "crear una barra de progreso con varios segmentos para distintas etapas de la "
470 "instalación, probado que el invocador sea un confmodule de debconf. El "
471 "invocador también puede interactuar con la barra de progreso usando el "
472 "protocolo de debconf, si así lo desea."
473
474 #. type: textblock
475 #: ../../debconf-apt-progress:36
476 msgid ""
477 "debconf locks its config database when it starts up, which makes it "
478 "unfortunately inconvenient to have one instance of debconf displaying the "
479 "progress bar and another passing through questions from packages being "
480 "installed. If you're using a multiple-segment progress bar, you'll need to "
481 "eval the output of the B<--config> option before starting the debconf "
482 "frontend to work around this. See L<the EXAMPLES section/EXAMPLES> below."
483 msgstr ""
484 "debconf bloquea su base de datos de configuración al iniciarse, lo cual hace "
485 "desafortunadamente inconveniente tener una instancia de debconf para mostrar "
486 "la barra de progreso, y otra para pasar por las consultas de los paquetes "
487 "que se están instalando. Si usa una barra de progreso con varios segmentos, "
488 "tendrá que evaluar («eval») la salida de la opción B<--config> antes de "
489 "iniciar la interfaz de debconf para evitar este comportamiento. Consulte "
490 "L<la sección EJEMPLOS/EJEMPLOS> más abajo."
491
492 #. type: =item
493 #: ../../debconf-apt-progress:47
494 msgid "B<--config>"
495 msgstr "B<--config>"
496
497 #. type: textblock
498 #: ../../debconf-apt-progress:49
499 msgid ""
500 "Print environment variables necessary to start up a progress bar frontend."
501 msgstr ""
502 "Muestra las variables de entorno necesarias para iniciar una interfaz de "
503 "barra de progreso."
504
505 #. type: =item
506 #: ../../debconf-apt-progress:51
507 msgid "B<--start>"
508 msgstr "B<--start>"
509
510 #. type: textblock
511 #: ../../debconf-apt-progress:53
512 msgid ""
513 "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and "
514 "B<--to> to use other endpoints."
515 msgstr ""
516 "Inicia una barra de progreso, que va de 0 a 100 por omisión. Use B<--from> "
517 "y B<--to> para usar otros puntos."
518
519 #. type: =item
520 #: ../../debconf-apt-progress:56
521 msgid "B<--from> I<waypoint>"
522 msgstr "B<--from> I<punto-de-progreso>"
523
524 #. type: textblock
525 #: ../../debconf-apt-progress:58
526 msgid ""
527 "If used with B<--start>, make the progress bar begin at I<waypoint> rather "
528 "than 0."
529 msgstr ""
530 "Si se usa con B<--start>, hace que la barra de progreso comience en el "
531 "I<punto-de-progreso> en lugar de 0."
532
533 #. type: textblock
534 #: ../../debconf-apt-progress:61
535 msgid ""
536 "Otherwise, install packages with their progress bar beginning at this "
537 "\"waypoint\". Must be used with B<--to>."
538 msgstr ""
539 "De lo contrario, instala los paquetes con la barra de progreso iniciándose "
540 "en este punto de progreso. Se debe usar con B<--to>."
541
542 #. type: =item
543 #: ../../debconf-apt-progress:64
544 msgid "B<--to> I<waypoint>"
545 msgstr "B<--to> I<punto-de-progreso>"
546
547 #. type: textblock
548 #: ../../debconf-apt-progress:66
549 msgid ""
550 "If used with B<--start>, make the progress bar end at I<waypoint> rather "
551 "than 100."
552 msgstr ""
553 "Si se usa con B<--start>, hace que la barra de progreso finalice en el "
554 "I<punto-de-progreso> en lugar de 100."
555
556 #. type: textblock
557 #: ../../debconf-apt-progress:69
558 msgid ""
559 "Otherwise, install packages with their progress bar ending at this "
560 "\"waypoint\". Must be used with B<--from>."
561 msgstr ""
562 "De lo contrario, instala los paquetes con la barra de progreso finalizando "
563 "en este punto de progreso. Se debe usar con B<--from>."
564
565 #. type: =item
566 #: ../../debconf-apt-progress:72
567 msgid "B<--stop>"
568 msgstr "B<--stop>"
569
570 #. type: textblock
571 #: ../../debconf-apt-progress:74
572 msgid "Stop a running progress bar."
573 msgstr "Detiene una barra de progreso en ejecución."
574
575 #. type: =item
576 #: ../../debconf-apt-progress:76
577 msgid "B<--no-progress>"
578 msgstr "B<--no-progress>"
579
580 #. type: textblock
581 #: ../../debconf-apt-progress:78
582 msgid ""
583 "Avoid starting, stopping, or stepping the progress bar. Progress messages "
584 "from apt, media change events, and debconf questions will still be passed "
585 "through to debconf."
586 msgstr ""
587 "Evita iniciar, detener o aumentar la barra de progreso. Aun así, los "
588 "mensajes de progreso de apt, eventos de cambio de dispositivo y consultas de "
589 "debconf se introducirán a través de debconf."
590
591 #. type: =item
592 #: ../../debconf-apt-progress:82
593 msgid "B<--dlwaypoint> I<percentage>"
594 msgstr "B<--dlwaypoint> I<porcentaje>"
595
596 #. type: textblock
597 #: ../../debconf-apt-progress:84
598 msgid ""
599 "Specify what percent of the progress bar to use for downloading packages. "
600 "The remainder will be used for installing packages. The default is to use "
601 "15% for downloading and the remaining 85% for installing."
602 msgstr ""
603 "Define el porcentaje de la barra de progreso que se usará para la descarga "
604 "de paquetes. El resto se usará para la instalación de paquetes. El valor por "
605 "omisión es un 15% para la descarga y el 85% restante para la instalación."
606
607 #. type: =item
608 #: ../../debconf-apt-progress:88
609 msgid "B<--logfile> I<file>"
610 msgstr "B<--logfile> I<fichero>"
611
612 #. type: textblock
613 #: ../../debconf-apt-progress:90
614 msgid "Send the normal output from apt to the given file."
615 msgstr "Envía la salida normal desde APT al fichero dado."
616
617 #. type: =item
618 #: ../../debconf-apt-progress:92
619 msgid "B<--logstderr>"
620 msgstr "B<--logstderr>"
621
622 #. type: textblock
623 #: ../../debconf-apt-progress:94
624 msgid ""
625 "Send the normal output from apt to stderr. If you supply neither B<--"
626 "logfile> nor B<--logstderr>, the normal output from apt will be discarded."
627 msgstr ""
628 "Envía la salida normal desde APT a la salida de error estándar. Si no "
629 "introduce B<--logfile> o B<--logstderr>, se descartará la salida normal de "
630 "APT."
631
632 #. type: =item
633 #: ../../debconf-apt-progress:98
634 msgid "B<-->"
635 msgstr "B<-->"
636
637 #. type: textblock
638 #: ../../debconf-apt-progress:100
639 msgid ""
640 "Terminate options. Since you will normally need to give at least the B<-y> "
641 "argument to the command being run, you will usually need to use B<--> to "
642 "prevent that being interpreted as an option to B<debconf-apt-progress> "
643 "itself."
644 msgstr ""
645 "Finaliza las opciones. Ya que habitualmente tendrá que introducir al menos "
646 "el argumento B<-y> a la orden a ejecutar, generalmente tendrá que usar B<--> "
647 "para evitar que se interprete como una opción de B<debconf-apt-progress>."
648
649 #. type: textblock
650 #: ../../debconf-apt-progress:109
651 msgid ""
652 "Install the GNOME desktop and an X window system development environment "
653 "within a progress bar:"
654 msgstr ""
655 "Para instalar el entorno de escritorio GNOME y el sistema de ventanas X de "
656 "desarrollo dentro de la barra de progreso:"
657
658 #. type: verbatim
659 #: ../../debconf-apt-progress:112
660 #, no-wrap
661 msgid ""
662 " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
663 "\n"
664 msgstr ""
665 " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n"
666 "\n"
667
668 #. type: textblock
669 #: ../../debconf-apt-progress:114
670 msgid ""
671 "Install the GNOME, KDE, and XFCE desktops within a single progress bar, "
672 "allocating 45% of the progress bar for each of GNOME and KDE and the "
673 "remaining 10% for XFCE:"
674 msgstr ""
675 "Para instalar los entornos de escritorio GNOME, KDE y XFCE dentro de una "
676 "sola barra de progreso, asignando el 45% de la barra de progreso para cada "
677 "uno de GNOME y KDE y el restante 10% para XFCE:"
678
679 #. type: verbatim
680 #: ../../debconf-apt-progress:118
681 #, no-wrap
682 msgid ""
683 " #! /bin/sh\n"
684 " set -e\n"
685 " case $1 in\n"
686 " '')\n"
687 " eval \"$(debconf-apt-progress --config)\"\n"
688 " \"$0\" debconf\n"
689 " ;;\n"
690 " debconf)\n"
691 " . /usr/share/debconf/confmodule\n"
692 " debconf-apt-progress --start\n"
693 " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
694 " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
695 " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
696 " debconf-apt-progress --stop\n"
697 " ;;\n"
698 " esac\n"
699 "\n"
700 msgstr ""
701 " #! /bin/sh\n"
702 " set -e\n"
703 " case $1 in\n"
704 " '')\n"
705 " eval \"$(debconf-apt-progress --config)\"\n"
706 " \"$0\" debconf\n"
707 " ;;\n"
708 " debconf)\n"
709 " . /usr/share/debconf/confmodule\n"
710 " debconf-apt-progress --start\n"
711 " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n"
712 " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n"
713 " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n"
714 " debconf-apt-progress --stop\n"
715 " ;;\n"
716 " esac\n"
717 "\n"
718
719 #. type: =head1
720 #: ../../debconf-apt-progress:135
721 msgid "RETURN CODE"
722 msgstr "CÓDIGO DE RETORNO"
723
724 #. type: textblock
725 #: ../../debconf-apt-progress:137
726 msgid ""
727 "The exit code of the specified command is returned, unless the user hit the "
728 "cancel button on the progress bar. If the cancel button was hit, a value of "
729 "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 "
730 "will be returned."
731 msgstr ""
732 "Se devuelve el código de salida de la orden definida, a menos que el usuario "
733 "pulse el botón de cancelar en la barra de progreso. Si se pulsa el botón de "
734 "cancelar se devuelve un valor de 30. Para evitar la ambigüedad, si la orden "
735 "devolvió 30, se devolverá el valor 3."
736
737 #. type: =head1
738 #: ../../debconf-apt-progress:654
739 msgid "AUTHORS"
740 msgstr "AUTORES"
741
742 #. type: textblock
743 #: ../../debconf-apt-progress:656 ../../debconf-escape:74
744 msgid "Colin Watson <[email protected]>"
745 msgstr "Colin Watson <[email protected]>"
746
747 #. type: textblock
748 #: ../../debconf-escape:5
749 msgid "debconf-escape - helper when working with debconf's escape capability"
750 msgstr ""
751 "debconf-escape - Asistente para la interacción con la funcionalidad de "
752 "escape de debconf"
753
754 #. type: verbatim
755 #: ../../debconf-escape:9
756 #, no-wrap
757 msgid ""
758 " debconf-escape -e < unescaped-text\n"
759 " debconf-escape -u < escaped-text\n"
760 "\n"
761 msgstr ""
762 " debconf-escape -e < texto-sin-escapar\n"
763 " debconf-escape -u < texto-escapado\n"
764 "\n"
765
766 #. type: textblock
767 #: ../../debconf-escape:14
768 msgid ""
769 "When debconf has the 'escape' capability set, it will expect commands you "
770 "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> "
771 "respectively) and will in turn escape backslashes and newlines in its "
772 "replies. This can be used, for example, to substitute multi-line strings "
773 "into templates, or to get multi-line extended descriptions reliably using "
774 "C<METAGET>."
775 msgstr ""
776 "Cuando se activa la funcionalidad de «escape» de debconf, éste esperará que "
777 "las órdenes que le envíe tengan barras inversas y saltos de línea (C<\\\\> y "
778 "C<\\n> respectivamente), devolviendo así barras inversas y saltos de línea "
779 "escapadas en sus respuestas. Se puede usar, por ejemplo, para sustituir "
780 "cadenas de varias líneas en las plantillas, o para obtener descripciones "
781 "extendidas en varias líneas adecuadamente usando C<METAGET>."
782
783 #. type: textblock
784 #: ../../debconf-escape:23
785 msgid "L<debconf-devel(7)> (available in the debconf-doc package)"
786 msgstr "L<debconf-devel(7)> (disponible en el paquete debconf-doc)"
787
788 #. type: textblock
789 #: ../../debconf-communicate:5
790 msgid "debconf-communicate - communicate with debconf"
791 msgstr "debconf-communicate - Permite la comunicación con debconf"
792
793 #. type: verbatim
794 #: ../../debconf-communicate:11
795 #, no-wrap
796 msgid ""
797 " echo commands | debconf-communicate [options] [package]\n"
798 "\n"
799 msgstr ""
800 " echo órdenes | debconf-communicate [opciones] [paquete]\n"
801 "\n"
802
803 #. type: textblock
804 #: ../../debconf-communicate:15
805 msgid ""
806 "B<debconf-communicate> allows you to communicate with debconf on the fly, "
807 "from the command line. The package argument is the name of the package which "
808 "you are pretending to be as you communicate with debconf, and it may be "
809 "omitted if you are lazy. It reads commands in the form used by the debconf "
810 "protocol from stdin. For documentation on the available commands and their "
811 "usage, see the debconf specification."
812 msgstr ""
813 "B<debconf-communicate> le permite comunicarse con debconf en el instante "
814 "desde la línea de órdenes. El argumento I<paquete> es el nombre del paquete "
815 "que pretende ser al comunicarse con debconf, y se puede omitir si así lo "
816 "desea. Lee las órdenes en la forma usada por el protocolo de debconf desde "
817 "la entrada estándar. Para más documentación sobre las órdenes disponibles y "
818 "su uso consulte la especificación de debconf."
819
820 #. type: textblock
821 #: ../../debconf-communicate:22
822 msgid ""
823 "The commands are executed in sequence. The textual return code of each is "
824 "printed out to standard output."
825 msgstr ""
826 "Las órdenes se ejecuten secuencialmente. El código de retorno textual de "
827 "cada uno de ellos se muestra por la salida estándar."
828
829 #. type: textblock
830 #: ../../debconf-communicate:25
831 msgid ""
832 "The return value of this program is the numeric return code of the last "
833 "executed command."
834 msgstr ""
835 "El valor de retorno de este programa es el código de retorno numérico de la "
836 "última orden ejecutada."
837
838 #. type: SH
839 #: ../../debconf-communicate:28 debconf.conf.5:444
840 #, no-wrap
841 msgid "EXAMPLE"
842 msgstr "EJEMPLO"
843
844 #. type: verbatim
845 #: ../../debconf-communicate:30
846 #, no-wrap
847 msgid ""
848 " echo get debconf/frontend | debconf-communicate\n"
849 "\n"
850 msgstr ""
851 " echo get debconf/frontend | debconf-communicate\n"
852 "\n"
853
854 #. type: textblock
855 #: ../../debconf-communicate:32
856 msgid "Print out the value of the debconf/frontend question."
857 msgstr "Muestra el valor de la pregunta debconf/frontend."
858
859 #. type: =head1
860 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25
861 #: ../../debconf-set-selections:20
862 msgid "WARNING"
863 msgstr "AVISO"
864
865 #. type: textblock
866 #: ../../debconf-communicate:36
867 msgid ""
868 "This program should never be used from a maintainer script of a package that "
869 "uses debconf! It may however, be useful in debugging."
870 msgstr ""
871 "¡Este programa nunca se debería usar mediante un script de responsable de un "
872 "paquete que usa debconf! No obstante, puede ser útil en la depuración."
873
874 #. type: textblock
875 #: ../../debconf-communicate:41
876 msgid "L<debconf-loadtemplate(1)>"
877 msgstr "L<debconf-loadtemplate(1)>"
878
879 #. type: textblock
880 #: ../../debconf-copydb:5
881 msgid "debconf-copydb - copy a debconf database"
882 msgstr "debconf-copydb - Copia una base de datos de debconf"
883
884 #. type: verbatim
885 #: ../../debconf-copydb:19
886 #, no-wrap
887 msgid ""
888 " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n"
889 "\n"
890 msgstr ""
891 " debconf-copydb base-de-datos_origen base-de-datos_destino [--pattern=patrón] [--owner-pattern=patrón] [--config=Foo:bar]\n"
892 "\n"
893
894 #. type: textblock
895 #: ../../debconf-copydb:32
896 msgid ""
897 "B<debconf-copydb> copies items from an existing debconf database into "
898 "another, possibly new database. The two databases may have different "
899 "formats; if so a conversion will automatically be done."
900 msgstr ""
901 "B<debconf-copydb> copia elementos de una base de datos existente a otra, "
902 "posiblemente nueva. Puede que el formato de las dos bases de datos sea "
903 "distinto; en este caso, se hará una conversión automática."
904
905 #. type: =item
906 #: ../../debconf-copydb:40
907 msgid "I<sourcedb>"
908 msgstr "I<base-de-datos_origen>"
909
910 #. type: textblock
911 #: ../../debconf-copydb:42
912 msgid ""
913 "The name of the source database. Typically it will be defined in your "
914 "debconf.conf (or .debconfrc) file."
915 msgstr ""
916 "En nombre de la base de datos original. Habitualmente, se definirá en el "
917 "fichero «debconf.conf» (o «.debconfrc»)."
918
919 #. type: =item
920 #: ../../debconf-copydb:45
921 msgid "I<destdb>"
922 msgstr "I<base-de-datos_destino>"
923
924 #. type: textblock
925 #: ../../debconf-copydb:47
926 msgid ""
927 "The name of the destination database. It may be defined in debconf.conf or ."
928 "debconfrc, or you might define it on the command line (see below)."
929 msgstr ""
930 "El nombre de la base de datos destino. Se puede definir en «debconf.conf» o "
931 "«.debconfrc», o lo puede especificar en la línea de órdenes (véase más "
932 "abajo)."
933
934 #. type: =item
935 #: ../../debconf-copydb:51
936 msgid "B<-p> I<pattern>, B<--pattern> I<pattern>"
937 msgstr "B<-p> I<patrón>, B<--patrón> I<patrón>"
938
939 #. type: textblock
940 #: ../../debconf-copydb:53
941 msgid ""
942 "If this is specified, only items in I<sourcedb> whose names match the "
943 "pattern will be copied."
944 msgstr ""
945 "Si se define, sólo se copiarán los elementos de la I<base-de-datos_origen> "
946 "cuyo nombre coincida con el patrón."
947
948 #. type: =item
949 #: ../../debconf-copydb:56
950 msgid "B<--owner-pattern> I<pattern>"
951 msgstr "B<--owner-pattern> I<patrón>"
952
953 #. type: textblock
954 #: ../../debconf-copydb:58
955 msgid ""
956 "If this is specified, only items in I<sourcedb> whose owners match the "
957 "pattern will be copied."
958 msgstr ""
959 "Si se define, sólo se copiarán los elementos de la I<base-de-datos_origen> "
960 "cuyos propietarios coincidan con el patrón."
961
962 #. type: =item
963 #: ../../debconf-copydb:61
964 msgid "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
965 msgstr "B<-c> I<foo:bar>, B<--config> I<Foo:bar>"
966
967 #. type: textblock
968 #: ../../debconf-copydb:63
969 msgid "Set option Foo to bar. This is similar to writing:"
970 msgstr "Define la opción Foo a bar. Esto es similar a escribir:"
971
972 #. type: verbatim
973 #: ../../debconf-copydb:65
974 #, no-wrap
975 msgid ""
976 " Foo: bar\n"
977 "\n"
978 msgstr ""
979 " Foo: bar\n"
980 "\n"
981
982 #. type: textblock
983 #: ../../debconf-copydb:67
984 msgid ""
985 "In debconf.conf, except you probably want to leave off the space on the "
986 "command line (or quote it: \"Foo: bar\"). Generally must be used multiple "
987 "times, to build up a full configuration stanza. While blank lines are used "
988 "to separate stanzas in debconf.conf, this program will assume that \"Name:"
989 "dbname\" denotes the beginning of a new stanza."
990 msgstr ""
991 "en «debconf.conf», a excepción de que posiblemente quiera omitir el espacio "
992 "en la línea de órdenes (o use comillas: \"Foo:bar\"). Habitualmente, querrá "
993 "usar esto varias veces para construir una definición de configuración "
994 "completa. Mientras que se usan líneas en blanco para separar las "
995 "definiciones en «debconf.conf», este programa asume que \"Name:"
996 "dbname\" (nombre: nombre-base-de-datos) denota el principio de una "
997 "definición nueva."
998
999 #. type: verbatim
1000 #: ../../debconf-copydb:77
1001 #, no-wrap
1002 msgid ""
1003 " debconf-copydb configdb backup\n"
1004 "\n"
1005 msgstr ""
1006 " debconf-copydb configdb backup\n"
1007 "\n"
1008
1009 #. type: textblock
1010 #: ../../debconf-copydb:79
1011 msgid ""
1012 "Copy all of configdb to backup, assuming you already have the backup "
1013 "database defined in debconf.conf."
1014 msgstr ""
1015 "Copia toda su configuración de la base de datos («configdb») a la copia de "
1016 "respaldo («backup»), suponiendo que ya tiene una base de datos de respaldo "
1017 "definida en «debconf.conf»."
1018
1019 #. type: verbatim
1020 #: ../../debconf-copydb:82
1021 #, no-wrap
1022 msgid ""
1023 " debconf-copydb configdb newdb --pattern='^slrn/' \\\n"
1024 " \t--config=Name:newdb --config=Driver:File \\\n"
1025 "\t--config=Filename:newdb.dat\n"
1026 "\n"
1027 msgstr ""
1028 " debconf-copydb configdb newdb --pattern='^slrn/' \\\n"
1029 " \t--config=Name:newdb --config=Driver:File \\\n"
1030 "\t--config=Filename:newdb.dat\n"
1031 "\n"
1032
1033 #. type: textblock
1034 #: ../../debconf-copydb:86
1035 msgid ""
1036 "Copy slrn's data out of configdb, and into newdb. newdb is not defined in "
1037 "the rc file, so the --config switches set up the database on the fly."
1038 msgstr ""
1039 "Copia los datos de slrn desde «configdb» a «newdb» (base de datos nueva). "
1040 "«newdb» no este definido en el fichero de configuración, así que la opción "
1041 "«--config» define la base de datos en el momento."
1042
1043 #. type: verbatim
1044 #: ../../debconf-copydb:89
1045 #, no-wrap
1046 msgid ""
1047 " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
1048 " \t-c InFd:none --pattern='^foo/'\n"
1049 "\n"
1050 msgstr ""
1051 " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n"
1052 " \t-c InFd:none --pattern='^foo/'\n"
1053 "\n"
1054
1055 #. type: textblock
1056 #: ../../debconf-copydb:92
1057 msgid "Spit out all the items in the debconf database related to package foo."
1058 msgstr ""
1059 "Muestra todos los elementos en la base de datos de debconf relacionados con "
1060 "el paquete «foo»."
1061
1062 #. type: verbatim
1063 #: ../../debconf-copydb:94
1064 #, no-wrap
1065 msgid ""
1066 " debconf-copydb configdb pipe --config=Name:pipe \\\n"
1067 " --config=Driver:Pipe --config=InFd:none | \\\n"
1068 " \tssh remotehost debconf-copydb pipe configdb \\\n"
1069 "\t\t--config=Name:pipe --config=Driver:Pipe\n"
1070 "\n"
1071 msgstr ""
1072 " debconf-copydb configdb pipe --config=Name:pipe \\\n"
1073 " --config=Driver:Pipe --config=InFd:none | \\\n"
1074 " \tssh remotehost debconf-copydb pipe configdb \\\n"
1075 "\t\t--config=Name:pipe --config=Driver:Pipe\n"
1076 "\n"
1077
1078 #. type: textblock
1079 #: ../../debconf-copydb:99
1080 msgid ""
1081 "This uses the special purpose pipe driver to copy a database to a remote "
1082 "system."
1083 msgstr ""
1084 "Esto hace uso del controlador de fines específicos «pipe» (tubería) para "
1085 "copiar una base de datos a un sistema remoto."
1086
1087 #. type: textblock
1088 #: ../../debconf-copydb:104
1089 msgid "L<debconf.conf(5)>"
1090 msgstr "L<debconf.conf(5)>"
1091
1092 #. type: textblock
1093 #: ../../debconf-getlang:5
1094 msgid "debconf-getlang - extract a language from a templates file"
1095 msgstr "debconf-getlang - Extrae un idioma de un fichero de plantilla"
1096
1097 #. type: verbatim
1098 #: ../../debconf-getlang:18
1099 #, no-wrap
1100 msgid ""
1101 " debconf-getlang lang master [translation]\n"
1102 " debconf-getlang --stats master translation [...]\n"
1103 "\n"
1104 msgstr ""
1105 " debconf-getlang idioma original [traducción]\n"
1106 " debconf-getlang --stats original traducción [...]\n"
1107 "\n"
1108
1109 #. type: textblock
1110 #: ../../debconf-getlang:23
1111 msgid ""
1112 "Note: This utility is deprecated; you should switch to using the po-debconf "
1113 "package."
1114 msgstr ""
1115 "Nota: Esta herramienta está obsoleta, debería usar el paquete po-debconf."
1116
1117 #. type: textblock
1118 #: ../../debconf-getlang:25
1119 msgid ""
1120 "This program helps make and manage translations of debconf templates. There "
1121 "are basically three situations in which this program might be called:"
1122 msgstr ""
1123 "Este programa ayuda a crear y gestionar las traducciones de las plantillas "
1124 "de debconf. Básicamente, hay tres situaciones en las que se podría invocar "
1125 "este programa:"
1126
1127 #. type: =item
1128 #: ../../debconf-getlang:30
1129 msgid "A translation is just being started."
1130 msgstr "Al iniciar una traducción."
1131
1132 #. type: textblock
1133 #: ../../debconf-getlang:32
1134 msgid ""
1135 "You want to provide the translator with a file they can work on that has the "
1136 "English fields from your templates file, plus blank Field-ll fields for the "
1137 "target language that they can fill in."
1138 msgstr ""
1139 "Desea ofrecer al traductor un fichero sobre el que trabajar que tenga los "
1140 "campos en inglés de su fichero de plantilla, además de campos secundarios "
1141 "que pueden rellenar con el idioma de destino."
1142
1143 #. type: textblock
1144 #: ../../debconf-getlang:36
1145 msgid ""
1146 "To do this, run the program with first parameter being the code for the "
1147 "language that is being translated to, and the second parameter being the "
1148 "filename of the English templates file."
1149 msgstr ""
1150 "Para ello, ejecute el programa con el primer parámetro, siendo éste el "
1151 "código del idioma al que se está traduciendo, y el nombre del fichero de "
1152 "plantilla en inglés como segundo parámetro."
1153
1154 #. type: =item
1155 #: ../../debconf-getlang:40
1156 msgid "A translation is well under way."
1157 msgstr "Una traducción está en curso."
1158
1159 #. type: textblock
1160 #: ../../debconf-getlang:42
1161 msgid ""
1162 "You have changed some English text, or added more items to your templates "
1163 "file, and you want to send the translators a file with the English text plus "
1164 "their current translations (or you are the translator, and you want to "
1165 "generate such a file for your own use)."
1166 msgstr ""
1167 "Ha modificado parte del texto en inglés, o ha añadido elementos a su fichero "
1168 "de plantilla y desea enviar a los traductores un fichero con el texto en "
1169 "inglés además de sus traducciones ya realizadas (o bien es el traductor, y "
1170 "desea generar tal fichero para su uso personal)."
1171
1172 #. type: textblock
1173 #: ../../debconf-getlang:47
1174 msgid ""
1175 "To accomplish this, run the program with the first parameter being the the "
1176 "code for the language that is being translated to, the second parameter "
1177 "being the filename of the master English templates file, and the third "
1178 "parameter being the filename of the current translated file."
1179 msgstr ""
1180 "Para ello, ejecute el programa con el primer parámetro siendo el código del "
1181 "lenguaje al que se está traduciendo, un segundo parámetro siendo el nombre "
1182 "del fichero de plantilla original en inglés, y un tercer parámetro siendo el "
1183 "nombre de fichero del fichero actualmente traducido."
1184
1185 #. type: textblock
1186 #: ../../debconf-getlang:52
1187 msgid ""
1188 "When run this way, the program is smart enough to notice fuzzy translations. "
1189 "For example a fuzzy Description will be output as Description-<lang>-fuzzy, "
1190 "and a new, blank Description-<lang> will be added. Translators should "
1191 "remove the -fuzzy fields as they correct the fuzzy translations."
1192 msgstr ""
1193 "Cuando se ejecuta de este modo, este programa es suficientemente inteligente "
1194 "como para detectar las cadenas difusas («fuzzy»). Por ejemplo, un campo "
1195 "«Description» difuso saldrá como «Description-<idioma>-fuzzy», y se añadirá "
1196 "un nuevo campo vacío «Description-<lang>». Los traductores deberían eliminar "
1197 "los campos «-fuzzy» a medida que corrigen las traducciones difusas."
1198
1199 #. type: =item
1200 #: ../../debconf-getlang:58
1201 msgid "Checking the status of a translation"
1202 msgstr "Comprobar el estado de la traducción."
1203
1204 #. type: textblock
1205 #: ../../debconf-getlang:60
1206 msgid ""
1207 "To check the status of a translation, use the --status flag, and pass the "
1208 "english template file as the first parameter, and all the other translated "
1209 "templates after that. It will output statistics for each of them. For "
1210 "example:"
1211 msgstr ""
1212 "Use la opción «--status» para comprobar el estado de una traducción, e "
1213 "introduzca el fichero de plantilla en inglés como el primer parámetro, "
1214 "seguido de todas las plantillas traducidas. Devolverá las estadísticas de "
1215 "cada uno de ellos. Por ejemplo:"
1216
1217 #. type: verbatim
1218 #: ../../debconf-getlang:65
1219 #, no-wrap
1220 msgid ""
1221 " debconf-getlang --stats debian/templates debian/templates.*\n"
1222 "\n"
1223 msgstr ""
1224 " debconf-getlang --stats debian/templates debian/templates.*\n"
1225 "\n"
1226
1227 #. type: =head1
1228 #: ../../debconf-getlang:69
1229 msgid "NOTE"
1230 msgstr "NOTA"
1231
1232 #. type: textblock
1233 #: ../../debconf-getlang:71
1234 msgid ""
1235 "Note that the text in the generated templates may be word-wrapped by debconf."
1236 msgstr ""
1237 "Tenga en cuenta que es probable que debconf justifique el texto en las "
1238 "plantillas generadas."
1239
1240 #. type: textblock
1241 #: ../../debconf-getlang:76
1242 msgid "L<debconf-mergetemplate(1)>"
1243 msgstr "L<debconf-mergetemplate(1)>"
1244
1245 #. type: textblock
1246 #: ../../debconf-get-selections:5
1247 msgid "debconf-get-selections - output contents of debconf database"
1248 msgstr ""
1249 "debconf-get-selections - Devuelve el contenido de una base de datos de "
1250 "debconf"
1251
1252 #. type: textblock
1253 #: ../../debconf-get-selections:9
1254 msgid "debconf-get-selections [--installer]"
1255 msgstr "debconf-get-selections [--installer]"
1256
1257 #. type: textblock
1258 #: ../../debconf-get-selections:13
1259 msgid ""
1260 "Output the current debconf database in a format understandable by debconf-"
1261 "set-selections."
1262 msgstr ""
1263 "Devuelve la base de datos de debconf actual en un formato comprensible por "
1264 "«debconf-set-selections»."
1265
1266 #. type: textblock
1267 #: ../../debconf-get-selections:16
1268 msgid ""
1269 "To dump the debconf database of the debian-installer, from /var/log/"
1270 "installer/cdebconf, use the --installer parameter."
1271 msgstr ""
1272 "Use el parámetro «--installer» para volcar la base de datos de debconf de "
1273 "debian-installer, tomando como fuente «/var/log/installer/cdebconf»."
1274
1275 #. type: textblock
1276 #: ../../debconf-get-selections:80 ../../debconf-set-selections:228
1277 msgid "Petter Reinholdtsen <[email protected]>"
1278 msgstr "Petter Reinholdtsen <[email protected]>"
1279
1280 #. type: textblock
1281 #: ../../debconf-loadtemplate:5
1282 msgid "debconf-loadtemplate - load template file into debconf database"
1283 msgstr ""
1284 "debconf-loadtemplate - Carga un fichero de plantilla en la base de datos de "
1285 "debconf"
1286
1287 #. type: verbatim
1288 #: ../../debconf-loadtemplate:16
1289 #, no-wrap
1290 msgid ""
1291 " debconf-loadtemplate owner file [file ..]\n"
1292 "\n"
1293 msgstr ""
1294 " debconf-loadtemplate propietario fichero [fichero ..]\n"
1295 "\n"
1296
1297 #. type: textblock
1298 #: ../../debconf-loadtemplate:20
1299 msgid ""
1300 "Loads one or more template files into the debconf database. The first "
1301 "parameter specifies the owner of the templates (typically, the owner is the "
1302 "name of a debian package). The remaining parameters are template files to "
1303 "load."
1304 msgstr ""
1305 "Carga uno o más ficheros de plantilla en la base de datos de debconf. El "
1306 "primer parámetro define al propietario de las plantillas (habitualmente, el "
1307 "propietario es el nombre de un paquete debian). Los parámetros restantes son "
1308 "los ficheros de plantilla a cargar."
1309
1310 #. type: textblock
1311 #: ../../debconf-loadtemplate:27
1312 msgid ""
1313 "This program should never be used from a maintainer script of a package that "
1314 "uses debconf! It may however, be useful in debugging, or to seed the debconf "
1315 "database."
1316 msgstr ""
1317 "¡Este programa nunca se debería usar a través de un script de desarrollador "
1318 "o un paquete que usa debconf! Sin embargo, puede ser útil en la depuración "
1319 "de fallos o para configurar la base de datos de debconf."
1320
1321 #. type: textblock
1322 #: ../../debconf-loadtemplate:33
1323 msgid "L<debconf-communicate(1)>"
1324 msgstr "L<debconf-communicate(1)>"
1325
1326 #. type: textblock
1327 #: ../../debconf-mergetemplate:5
1328 msgid "debconf-mergetemplate - merge together multiple debconf template files"
1329 msgstr ""
1330 "debconf-mergetemplate - Fusiona varios ficheros de plantilla de debconf"
1331
1332 #. type: verbatim
1333 #: ../../debconf-mergetemplate:19
1334 #, no-wrap
1335 msgid ""
1336 " debconf-mergetemplate [options] [templates.ll ...] templates\n"
1337 "\n"
1338 msgstr ""
1339 " debconf-mergetemplate [opciones] [plantillas.ll ...] plantillas\n"
1340 "\n"
1341
1342 #. type: textblock
1343 #: ../../debconf-mergetemplate:23
1344 msgid ""
1345 "Note: This utility is deprecated. You should switch to using po-debconf's "
1346 "po2debconf program."
1347 msgstr ""
1348 "Nota: Esta herramienta está obsoleta. Debería usar el programa po2debconf "
1349 "del paquete po-debconf."
1350
1351 #. type: textblock
1352 #: ../../debconf-mergetemplate:26
1353 msgid ""
1354 "This program is useful if you have multiple debconf templates files which "
1355 "you want to merge together into one big file. All the specified files will "
1356 "be read in, merged, and output to standard output."
1357 msgstr ""
1358 "Este programa es útil si tiene varios ficheros de plantilla de debconf que "
1359 "desea fusionar en un sólo fichero grande. Todos los ficheros definidos se "
1360 "leerán, fusionarán y mostrarán por la salida estándar."
1361
1362 #. type: textblock
1363 #: ../../debconf-mergetemplate:30
1364 msgid ""
1365 "This can be especially useful if you are dealing with translated template "
1366 "files. In this case, you might have your main template file, plus several "
1367 "other files provided by the translators. These files will have translated "
1368 "fields in them, and maybe the translators left in the english versions of "
1369 "the fields they translated, for their reference."
1370 msgstr ""
1371 "Esto puede ser particularmente útil cuando está tratando con ficheros de "
1372 "plantilla traducidos. En este caso, puede que tenga su fichero de plantilla "
1373 "principal, además de varios otros ficheros proporcionados por los "
1374 "traductores. Estos ficheros contendrán campos traducidos, y puede que los "
1375 "traductores hayan dejado las versiones en inglés de los campos que han "
1376 "traducido como referencia."
1377
1378 #. type: textblock
1379 #: ../../debconf-mergetemplate:36
1380 msgid ""
1381 "So, you want to merge together all the translated templates files with your "
1382 "main templates file. Any fields that are unique to the translated files need "
1383 "to be added in to the correct templates, but any fields they have in common "
1384 "should be superseded by the fields in the main file (which might be more up-"
1385 "to-date)."
1386 msgstr ""
1387 "Digamos que desea fusionar todos los ficheros de plantilla traducidos con su "
1388 "fichero de plantilla original. Todos los campos que son exclusivos de los "
1389 "ficheros traducidos se tendrán que añadir a las plantillas correctas, pero "
1390 "todos los campos que tienen en común se deben reemplazar por los campos en "
1391 "el fichero principal (que puede estar más actualizado)."
1392
1393 #. type: textblock
1394 #: ../../debconf-mergetemplate:42
1395 msgid ""
1396 "This program handles that case properly, just list each of the translated "
1397 "templates files, and then your main templates file last."
1398 msgstr ""
1399 "Este programa trata esta situación adecuadamente, simplemente defina cada "
1400 "uno de los ficheros de plantilla traducidos, y por último su fichero de "
1401 "plantilla original."
1402
1403 #. type: =item
1404 #: ../../debconf-mergetemplate:49
1405 msgid "--outdated"
1406 msgstr "--outdated"
1407
1408 #. type: textblock
1409 #: ../../debconf-mergetemplate:51
1410 msgid ""
1411 "Merge in even outdated translations. The default is to drop them with a "
1412 "warning message."
1413 msgstr ""
1414 "Fusiona incluso traducciones obsoletas. El comportamiento por omisión es "
1415 "omitirlos con un mensaje de aviso."
1416
1417 #. type: =item
1418 #: ../../debconf-mergetemplate:54
1419 msgid "--drop-old-templates"
1420 msgstr "--drop-old-templates"
1421
1422 #. type: textblock
1423 #: ../../debconf-mergetemplate:56
1424 msgid ""
1425 "If a translation has an entire template that is not in the master file (and "
1426 "thus is probably an old template), drop that entire template."
1427 msgstr ""
1428 "Si una traducción tiene una plantilla completa que no está en el fichero "
1429 "original (y por ello, probablemente sea una plantilla antigua), omite la "
1430 "plantilla por completo."
1431
1432 #. type: textblock
1433 #: ../../debconf-mergetemplate:63
1434 msgid "L<debconf-getlang(1)>"
1435 msgstr "L<debconf-getlang(1)>"
1436
1437 #. type: textblock
1438 #: ../../debconf-set-selections:5
1439 #, fuzzy
1440 #| msgid ""
1441 #| "debconf-set-selections - insert new default values into the debconf "
1442 #| "database"
1443 msgid "debconf-set-selections - insert new values into the debconf database"
1444 msgstr ""
1445 "debconf-set-selections - Inserta nuevos valores predefinidos en la base de "
1446 "datos de debconf"
1447
1448 #. type: verbatim
1449 #: ../../debconf-set-selections:9
1450 #, no-wrap
1451 msgid ""
1452 " debconf-set-selections file\n"
1453 " debconf-get-selections | ssh newhost debconf-set-selections\n"
1454 "\n"
1455 msgstr ""
1456 " debconf-set-selections fichero\n"
1457 " debconf-get-selections | ssh newhost debconf-set-selections\n"
1458 "\n"
1459
1460 #. type: textblock
1461 #: ../../debconf-set-selections:14
1462 msgid ""
1463 "B<debconf-set-selections> can be used to pre-seed the debconf database with "
1464 "answers, or to change answers in the database. Each question will be marked "
1465 "as seen to prevent debconf from asking the question interactively."
1466 msgstr ""
1467 "B<debconf-set-selections> se puede usar para preconfigurar la base de datos "
1468 "de debconf, o para cambiar las respuestas en la base de datos. Cada pregunta "
1469 "se marcará como ya vista («seen») para evitar que debconf plantee la "
1470 "cuestión de forma interactiva."
1471
1472 #. type: textblock
1473 #: ../../debconf-set-selections:18
1474 msgid "Reads from a file if a filename is given, otherwise from stdin."
1475 msgstr ""
1476 "Lee desde un fichero si se da un nombre de fichero, de lo contrario leerá "
1477 "desde la entrada estándar."
1478
1479 #. type: textblock
1480 #: ../../debconf-set-selections:22
1481 msgid ""
1482 "Only use this command to seed debconf values for packages that will be or "
1483 "are installed. Otherwise you can end up with values in the database for "
1484 "uninstalled packages that will not go away, or with worse problems involving "
1485 "shared values. It is recommended that this only be used to seed the database "
1486 "if the originating machine has an identical install."
1487 msgstr ""
1488 "Use esta orden sólo para introducir valores de debconf para paquetes que se "
1489 "van a instalar, o que ya lo están. De lo contrario puede acabar con valores "
1490 "en la base de datos para paquetes desinstalados, que no desaparecerán, o con "
1491 "problemas más profundos relacionados con valores compartidos. Se recomienda "
1492 "su uso para configurar la base de datos sólo si el sistema original tiene "
1493 "una instalación idéntica."
1494
1495 #. type: =head1
1496 #: ../../debconf-set-selections:28
1497 msgid "DATA FORMAT"
1498 msgstr "FORMATO DE DATOS"
1499
1500 #. type: textblock
1501 #: ../../debconf-set-selections:30
1502 msgid ""
1503 "The data is a series of lines. Lines beginning with a # character are "
1504 "comments. Blank lines are ignored. All other lines set the value of one "
1505 "question, and should contain four values, each separated by one character of "
1506 "whitespace. The first value is the name of the package that owns the "
1507 "question. The second is the name of the question, the third value is the "
1508 "type of this question, and the fourth value (through the end of the line) "
1509 "is the value to use for the answer of the question."
1510 msgstr ""
1511 "Los datos son una serie de líneas. Las líneas que comienzan con un carácter "
1512 "«#» son comentarios, y se ignoran las líneas en blanco. Todas las otras "
1513 "líneas definen el valor de una pregunta y deberían contener cuatro valores, "
1514 "cada uno de ellos separado por un carácter de espacio en blanco. El primer "
1515 "valor es el nombre del paquete al que pertenece la pregunta. El segundo es "
1516 "el nombre de la pregunta, el tercer valor es el tipo de pregunta y el cuarto "
1517 "valor (al final de la línea) es el valor a usar para responder a la pregunta."
1518
1519 #. type: textblock
1520 #: ../../debconf-set-selections:38
1521 msgid ""
1522 "Alternatively, the third value can be \"seen\"; then the preseed line only "
1523 "controls whether the question is marked as seen in debconf's database. Note "
1524 "that preseeding a question's value defaults to marking that question as "
1525 "seen, so to override the default value without marking a question seen, you "
1526 "need two lines."
1527 msgstr ""
1528 "De forma alternativa, el tercer valor puede ser «seen»; en este caso, la "
1529 "línea introducida sólo controla si la pregunta se marca como ya vista en la "
1530 "base de datos de debconf. Tenga en cuenta que, por omisión, introducir el "
1531 "valor de una pregunta marca la pregunta como ya vista, así que si desea "
1532 "sustituir el valor predefinido sin marcar la pregunta como ya vista "
1533 "necesitará dos líneas."
1534
1535 #. type: textblock
1536 #: ../../debconf-set-selections:44
1537 msgid ""
1538 "Lines can be continued to the next line by ending them with a \"\\\" "
1539 "character."
1540 msgstr ""
1541 "Puede continuar las líneas en la siguiente línea finalizándolas con el "
1542 "carácter «\\»."
1543
1544 #. type: verbatim
1545 #: ../../debconf-set-selections:49
1546 #, no-wrap
1547 msgid ""
1548 " # Force debconf priority to critical.\n"
1549 " debconf debconf/priority select critical\n"
1550 "\n"
1551 msgstr ""
1552 " # Fuerza la prioridad de debconf a crítico.\n"
1553 " debconf debconf/priority select critical\n"
1554 "\n"
1555
1556 #. type: verbatim
1557 #: ../../debconf-set-selections:52
1558 #, no-wrap
1559 msgid ""
1560 " # Override default frontend to readline, but allow user to select.\n"
1561 " debconf debconf/frontend select readline\n"
1562 " debconf debconf/frontend seen false\n"
1563 "\n"
1564 msgstr ""
1565 " # Reemplaza la interfaz predeterminada con readline, pero permite la\n"
1566 " # selección del usuario.\n"
1567 " debconf debconf/frontend select readline\n"
1568 " debconf debconf/frontend seen false\n"
1569 "\n"
1570
1571 #. type: =item
1572 #: ../../debconf-set-selections:60
1573 msgid "B<--verbose>, B<-v>"
1574 msgstr "B<--verbose>, B<-v>"
1575
1576 #. type: textblock
1577 #: ../../debconf-set-selections:62
1578 msgid "verbose output"
1579 msgstr "Salida informativa."
1580
1581 #. type: =item
1582 #: ../../debconf-set-selections:64
1583 msgid "B<--checkonly>, B<-c>"
1584 msgstr "B<--checkonly>, B<-c>"
1585
1586 #. type: textblock
1587 #: ../../debconf-set-selections:66
1588 msgid "only check the input file format, do not save changes to database"
1589 msgstr ""
1590 "Sólo comprueba el formato del fichero de entrada, no guarda los cambios en "
1591 "la base de datos."
1592
1593 #. type: textblock
1594 #: ../../debconf-set-selections:72
1595 msgid "L<debconf-get-selections(1)> (available in the debconf-utils package)"
1596 msgstr "L<debconf-get-selections(1)> (disponible en el paquete debconf-utils)"
1597
1598 #. type: textblock
1599 #: ../../debconf-show:5
1600 msgid "debconf-show - query the debconf database"
1601 msgstr "debconf-show - Realiza consultas a la base de datos de debconf"
1602
1603 #. type: verbatim
1604 #: ../../debconf-show:9
1605 #, no-wrap
1606 msgid ""
1607 " debconf-show packagename [...] [--db=dbname]\n"
1608 " debconf-show --listowners [--db=dbname]\n"
1609 " debconf-show --listdbs\n"
1610 "\n"
1611 msgstr ""
1612 " debconf-show paquete [...] [--db=nombre-base-de-datos]\n"
1613 " debconf-show --listowners [--db=nombre-base-de-datos]\n"
1614 " debconf-show --listdbs\n"
1615 "\n"
1616
1617 #. type: textblock
1618 #: ../../debconf-show:15
1619 msgid "B<debconf-show> lets you query the debconf database in different ways."
1620 msgstr ""
1621 "B<debconf-show> le permite consultar la base de datos de debconf de varias "
1622 "maneras."
1623
1624 #. type: textblock
1625 #: ../../debconf-show:17
1626 msgid ""
1627 "The most common use is \"debconf-show packagename\", which displays all "
1628 "items in the debconf database owned by a given package, and their current "
1629 "values. Questions that have been asked already are prefixed with an '*'."
1630 msgstr ""
1631 "La más común es «debconf-show paquete», que muestra todos los elementos en "
1632 "la base de datos de debconf que pertenecen al paquete dado, y sus valores "
1633 "actuales. Las preguntas que ya se han planteado se prefijan con «*»."
1634
1635 #. type: textblock
1636 #: ../../debconf-show:21
1637 msgid ""
1638 "This can be useful as a debugging aid, and especially handy in bug reports "
1639 "involving a package's use of debconf."
1640 msgstr ""
1641 "Esto puede ser útil como una ayuda durante la depuración de fallos, y "
1642 "especialmente útil en los informes de fallo relacionados con el uso de "
1643 "debconf por parte de un paquete."
1644
1645 #. type: =item
1646 #: ../../debconf-show:28
1647 msgid "B<--db=>I<dbname>"
1648 msgstr "B<--db=>I<nombre-base-de-datos>"
1649
1650 #. type: textblock
1651 #: ../../debconf-show:30
1652 msgid ""
1653 "Specify the database to query. By default, debconf-show queries the main "
1654 "database."
1655 msgstr ""
1656 "Define la base de datos a consultar. Por omisión, «debconf-show» consulta la "
1657 "base de datos principal."
1658
1659 #. type: =item
1660 #: ../../debconf-show:33
1661 msgid "B<--listowners>"
1662 msgstr "B<--listowners>"
1663
1664 #. type: textblock
1665 #: ../../debconf-show:35
1666 msgid ""
1667 "Lists all owners of questions in the database. Generally an owner is "
1668 "equivalent to a debian package name."
1669 msgstr ""
1670 "Enumera todos los propietarios de las preguntas en la base de datos. "
1671 "Habitualmente, un propietario equivale al nombre de un paquete debian."
1672
1673 #. type: =item
1674 #: ../../debconf-show:38
1675 msgid "B<--listdbs>"
1676 msgstr "B<--listdbs>"
1677
1678 #. type: textblock
1679 #: ../../debconf-show:40
1680 msgid "Lists all available databases."
1681 msgstr "Enumera todas las bases de datos disponibles."
1682
1683 #. type: textblock
1684 #: ../../debconf-show:154
1685 msgid "Joey Hess <[email protected]> and Sylvain Ferriol"
1686 msgstr "Joey Hess <[email protected]> y Sylvain Ferriol"
1687
1688 #. type: textblock
1689 #: ../../dpkg-preconfigure:5
1690 msgid ""
1691 "dpkg-preconfigure - let packages ask questions prior to their installation"
1692 msgstr ""
1693 "dpkg-preconfigure - Permite que los paquetes formulen preguntas antes de su "
1694 "instalación"
1695
1696 #. type: verbatim
1697 #: ../../dpkg-preconfigure:9
1698 #, no-wrap
1699 msgid ""
1700 " dpkg-preconfigure [options] package.deb\n"
1701 "\n"
1702 msgstr ""
1703 " dpkg-preconfigure [opciones] paquete.deb\n"
1704 "\n"
1705
1706 #. type: verbatim
1707 #: ../../dpkg-preconfigure:11
1708 #, no-wrap
1709 msgid ""
1710 " dpkg-preconfigure --apt\n"
1711 "\n"
1712 msgstr ""
1713 " dpkg-preconfigure --apt\n"
1714 "\n"
1715
1716 #. type: textblock
1717 #: ../../dpkg-preconfigure:15
1718 msgid ""
1719 "B<dpkg-preconfigure> lets packages ask questions before they are installed. "
1720 "It operates on a set of debian packages, and all packages that use debconf "
1721 "will have their config script run so they can examine the system and ask "
1722 "questions."
1723 msgstr ""
1724 "B<dpkg-preconfigure> permite que los paquetes formulen preguntas antes de su "
1725 "instalación. Opera con un conjunto de paquetes debian, ejecutando el script "
1726 "de configuración de todos aquellos que usen debconf de forma que puedan "
1727 "examinar el sistema y formular preguntas."
1728
1729 #. type: textblock
1730 #: ../../dpkg-preconfigure:30
1731 msgid ""
1732 "Set the lowest priority of questions you are interested in. Any questions "
1733 "with a priority below the selected priority will be ignored and their "
1734 "default answers will be used."
1735 msgstr ""
1736 "Define la prioridad más baja de las preguntas que le interesan. Todas las "
1737 "preguntas con una prioridad menor que la prioridad seleccionada se "
1738 "ignorarán, usando las respuestas predefinidas."
1739
1740 #. type: =item
1741 #: ../../dpkg-preconfigure:38
1742 msgid "B<--apt>"
1743 msgstr "B<--apt>"
1744
1745 #. type: textblock
1746 #: ../../dpkg-preconfigure:40
1747 msgid ""
1748 "Run in apt mode. It will expect to read a set of package filenames from "
1749 "stdin, rather than getting them as parameters. Typically this is used to "
1750 "make apt run dpkg-preconfigure on all packages before they are installed. "
1751 "To do this, add something like this to /etc/apt/apt.conf:"
1752 msgstr ""
1753 "Ejecuta en modo apt. Esperará leer un conjunto de nombres de fichero de "
1754 "paquete por la entrada estándar en lugar de obtenerlos como parámetros. "
1755 "Habitualmente, se usa para hacer que apt ejecute «dpkg-preconfigure» sobre "
1756 "todos los paquetes antes de su instalación. Para hacer esto, añada algo "
1757 "parecido al ejemplo en «/etc/apt/apt.conf»:"
1758
1759 #. type: verbatim
1760 #: ../../dpkg-preconfigure:45
1761 #, no-wrap
1762 msgid ""
1763 " // Pre-configure all packages before\n"
1764 " // they are installed.\n"
1765 " DPkg::Pre-Install-Pkgs {\n"
1766 " \t\"dpkg-preconfigure --apt --priority=low\";\n"
1767 " };\n"
1768 "\n"
1769 msgstr ""
1770 " // Preconfigurar todos los paquetes\n"
1771 " // antes de su instalación.\n"
1772 " DPkg::Pre-Install-Pkgs {\n"
1773 " \t\"dpkg-preconfigure --apt --priority=low\";\n"
1774 " };\n"
1775 "\n"
1776
1777 #. type: =item
1778 #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69
1779 msgid "B<-h>, B<--help>"
1780 msgstr "B<-h>, B<--help>"
1781
1782 #. type: textblock
1783 #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71
1784 msgid "Display usage help."
1785 msgstr "Muestra la ayuda de uso."
1786
1787 #. type: textblock
1788 #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79
1789 msgid "L<debconf(7)>"
1790 msgstr "L<debconf(7)>"
1791
1792 #. type: textblock
1793 #: ../../dpkg-reconfigure:5
1794 msgid "dpkg-reconfigure - reconfigure an already installed package"
1795 msgstr "dpkg-reconfigure - Reconfigura un paquete ya instalado"
1796
1797 #. type: verbatim
1798 #: ../../dpkg-reconfigure:9
1799 #, no-wrap
1800 msgid ""
1801 " dpkg-reconfigure [options] packages\n"
1802 "\n"
1803 msgstr ""
1804 " dpkg-reconfigure [opciones] paquetes\n"
1805 "\n"
1806
1807 #. type: textblock
1808 #: ../../dpkg-reconfigure:13
1809 msgid ""
1810 "B<dpkg-reconfigure> reconfigures packages after they have already been "
1811 "installed. Pass it the names of a package or packages to reconfigure. It "
1812 "will ask configuration questions, much like when the package was first "
1813 "installed."
1814 msgstr ""
1815 "B<dpkg-reconfigure> reconfigura paquetes después de su instalación. "
1816 "Introduzca los nombres del paquete o paquetes a reconfigurar. Formulará "
1817 "preguntas de configuración de forma similar a cuando el paquete se instaló "
1818 "en primer lugar."
1819
1820 #. type: textblock
1821 #: ../../dpkg-reconfigure:18
1822 msgid ""
1823 "If you just want to see the current configuration of a package, see "
1824 "L<debconf-show(1)> instead."
1825 msgstr ""
1826 "Si sólo desea ver la configuración actual de un paquete, consulte L<debconf-"
1827 "show(1)>."
1828
1829 #. type: textblock
1830 #: ../../dpkg-reconfigure:27
1831 msgid ""
1832 "Select the frontend to use. The default frontend can be permanently changed "
1833 "by:"
1834 msgstr ""
1835 "Selecciona la interfaz a usar. La interfaz predefinida se puede cambiar de "
1836 "forma permanente con:"
1837
1838 #. type: verbatim
1839 #: ../../dpkg-reconfigure:30
1840 #, no-wrap
1841 msgid ""
1842 " dpkg-reconfigure debconf\n"
1843 "\n"
1844 msgstr ""
1845 " dpkg-reconfigure debconf\n"
1846 "\n"
1847
1848 #. type: textblock
1849 #: ../../dpkg-reconfigure:32
1850 msgid ""
1851 "Note that if you normally have debconf set to use the noninteractive "
1852 "frontend, dpkg-reconfigure will use the dialog frontend instead, so you "
1853 "actually get to reconfigure the package."
1854 msgstr ""
1855 "Tenga en cuenta que si habitualmente tiene configurado debconf para que use "
1856 "la interfaz no interactiva, dpkg-reconfigure usará la interfaz dialog, de "
1857 "forma que realmente pueda reconfigurar el paquete."
1858
1859 #. type: textblock
1860 #: ../../dpkg-reconfigure:38
1861 msgid ""
1862 "Specify the minimum priority of question that will be displayed. dpkg-"
1863 "reconfigure normally shows low priority questions no matter what your "
1864 "default priority is. See L<debconf(7)> for a list."
1865 msgstr ""
1866 "Define la prioridad mínima de las preguntas a mostrar. Habitualmente, dpkg-"
1867 "reconfigure muestra preguntas con una baja prioridad sin importar cuál es la "
1868 "prioridad predefinida. Para una lista, consulte L<debconf(7)>."
1869
1870 #. type: =item
1871 #: ../../dpkg-reconfigure:46
1872 msgid "B<--default-priority>"
1873 msgstr "B<--default-priority>"
1874
1875 #. type: textblock
1876 #: ../../dpkg-reconfigure:48
1877 msgid ""
1878 "Use whatever the default priority of question is, instead of forcing the "
1879 "priority to low."
1880 msgstr ""
1881 "Usa la prioridad predefinida de la pregunta, en lugar de forzar la prioridad "
1882 "a baja."
1883
1884 #. type: =item
1885 #: ../../dpkg-reconfigure:51
1886 msgid "B<-u>, B<--unseen-only>"
1887 msgstr "B<-u>, B<--unseen-only>"
1888
1889 #. type: textblock
1890 #: ../../dpkg-reconfigure:53
1891 msgid ""
1892 "By default, all questions are shown, even if they have already been "
1893 "answered. If this parameter is set though, only questions that have not yet "
1894 "been seen will be asked."
1895 msgstr ""
1896 "Por omisión se muestran todas las preguntas aunque ya se hayan preguntado. "
1897 "Si define este parámetro, sólo se formularán las preguntas que nunca se "
1898 "hayan mostrado."
1899
1900 #. type: =item
1901 #: ../../dpkg-reconfigure:57
1902 msgid "B<--force>"
1903 msgstr "B<--force>"
1904
1905 #. type: textblock
1906 #: ../../dpkg-reconfigure:59
1907 msgid ""
1908 "Force dpkg-reconfigure to reconfigure a package even if the package is in an "
1909 "inconsistent or broken state. Use with caution."
1910 msgstr ""
1911 "Fuerza dpkg-reconfigure a reconfigurar un paquete, incluso si está en un "
1912 "estado roto o inconsistente. Usar con precaución."
1913
1914 #. type: =item
1915 #: ../../dpkg-reconfigure:62
1916 msgid "B<--no-reload>"
1917 msgstr "B<--no-reload>"
1918
1919 #. type: textblock
1920 #: ../../dpkg-reconfigure:64
1921 msgid ""
1922 "Prevent dpkg-reconfigure from reloading templates. Use with caution; this "
1923 "will prevent dpkg-reconfigure from repairing broken templates databases. "
1924 "However, it may be useful in constrained environments where rewriting the "
1925 "templates database is expensive."
1926 msgstr ""
1927 "Evita que dpkg-reconfigure cargue las plantillas otra vez. Usar con "
1928 "precaución; esto evitará que dpkg-reconfigure repare bases de datos rotas de "
1929 "plantillas. Sin embargo, puede ser útil en entornos limitados en los que "
1930 "reescribir la base de datos de plantillas tenga un alto coste."
1931
1932 #. type: TH
1933 #: debconf.conf.5:1
1934 #, no-wrap
1935 msgid "DEBCONF.CONF"
1936 msgstr "DEBCONF.CONF"
1937
1938 #. type: Plain text
1939 #: debconf.conf.5:4
1940 msgid "debconf.conf - debconf configuration file"
1941 msgstr "debconf.conf - Fichero de configuración de debconf"
1942
1943 #. type: Plain text
1944 #: debconf.conf.5:12
1945 msgid ""
1946 "Debconf is a configuration system for Debian packages. /etc/debconf.conf and "
1947 "~/.debconfrc are configuration files debconf uses to determine which "
1948 "databases it should use. These databases are used for storing two types of "
1949 "information; dynamic config data the user enters into it, and static "
1950 "template data. Debconf offers a flexible, extensible database backend. New "
1951 "drivers can be created with a minimum of effort, and sets of drivers can be "
1952 "combined in various ways."
1953 msgstr ""
1954 "Debconf es un sistema de configuración de paquetes de Debian. «/etc/debconf."
1955 "conf» y «~/.debconfrc» son los ficheros de configuración que usa debconf "
1956 "para determinar las bases de datos que debería usar. Estas bases de datos "
1957 "guardan dos tipos de información; los datos dinámicos de configuración que "
1958 "el usuario introduce, y datos estáticos de plantilla. Debconf ofrece un "
1959 "sistema de base de datos flexible y extensible. Puede crear controladores "
1960 "nuevos con un esfuerzo mínimo, y combinar conjuntos de controladores de "
1961 "varias maneras."
1962
1963 #. type: Plain text
1964 #: debconf.conf.5:17
1965 #, no-wrap
1966 msgid ""
1967 " # This is a sample config file that is\n"
1968 " # sufficient to use debconf.\n"
1969 " Config: configdb\n"
1970 " Templates: templatedb\n"
1971 msgstr ""
1972 " # Este es un fichero de configuración de\n"
1973 " # ejemplo suficiente para usar debconf.\n"
1974 " Config: configdb\n"
1975 " Templates: templatedb\n"
1976
1977 #. type: Plain text
1978 #: debconf.conf.5:21
1979 #, no-wrap
1980 msgid ""
1981 " Name: configdb\n"
1982 " Driver: File\n"
1983 " Filename: /var/cache/debconf/config.dat\n"
1984 msgstr ""
1985 " Name: configuración-base-de-datos\n"
1986 " Driver: File\n"
1987 " Filename: /var/cache/debconf/config.dat\n"
1988
1989 #. type: Plain text
1990 #: debconf.conf.5:26
1991 #, no-wrap
1992 msgid ""
1993 " Name: templatedb\n"
1994 " Driver: File\n"
1995 " Mode: 644\n"
1996 " Filename: /var/cache/debconf/templates.dat\n"
1997 msgstr ""
1998 " Name: base-de-datos-de-plantillas\n"
1999 " Driver: File\n"
2000 " Mode: 644\n"
2001 " Filename: /var/cache/debconf/templates.dat\n"
2002
2003 #. type: SH
2004 #: debconf.conf.5:26
2005 #, no-wrap
2006 msgid "FILE FORMAT"
2007 msgstr "FORMATO DEL FICHERO"
2008
2009 #. type: Plain text
2010 #: debconf.conf.5:30
2011 msgid ""
2012 "The format of this file is a series of stanzas, each separated by at least "
2013 "one wholly blank line. Comment lines beginning with a \"#\" character are "
2014 "ignored."
2015 msgstr ""
2016 "El formato de este fichero es una serie de definiciones separadas, como "
2017 "mínimo, por una línea vacía. Se ignoran las líneas de comentario que "
2018 "empiezan con «#»."
2019
2020 #. type: Plain text
2021 #: debconf.conf.5:33
2022 msgid ""
2023 "The first stanza of the file is special, is used to configure debconf as a "
2024 "whole. Two fields are required to be in this first stanza:"
2025 msgstr ""
2026 "La primera definición del fichero es especial, y se usa para configurar "
2027 "debconf al completo. Es necesario que haya dos campos en la primera "
2028 "definición:"
2029
2030 #. type: TP
2031 #: debconf.conf.5:34
2032 #, no-wrap
2033 msgid "B<Config>"
2034 msgstr "B<Config>"
2035
2036 #. type: Plain text
2037 #: debconf.conf.5:37
2038 msgid "Specifies the name of the database from which to load config data."
2039 msgstr ""
2040 "Define el nombre de la base de datos desde la cual cargar los datos de "
2041 "configuración."
2042
2043 #. type: TP
2044 #: debconf.conf.5:37
2045 #, no-wrap
2046 msgid "B<Templates>"
2047 msgstr "B<Templates>"
2048
2049 #. type: Plain text
2050 #: debconf.conf.5:40
2051 msgid "Specifies the name of the database to use for the template cache."
2052 msgstr ""
2053 "Define el nombre de la base de datos a usar para el almacén («caché») de "
2054 "plantillas."
2055
2056 #. type: Plain text
2057 #: debconf.conf.5:43
2058 msgid "Additional fields that can be used include:"
2059 msgstr "Los campos adicionales que se pueden usar incluyen:"
2060
2061 #. type: TP
2062 #: debconf.conf.5:44
2063 #, no-wrap
2064 msgid "B<Frontend>"
2065 msgstr "B<Frontend>"
2066
2067 #. type: Plain text
2068 #: debconf.conf.5:48
2069 msgid ""
2070 "The frontend Debconf should use, overriding any frontend set in the debconf "
2071 "database."
2072 msgstr ""
2073 "La interfaz que Debconf debería usar, anulando cualquier interfaz definida "
2074 "en la base de datos de debconf."
2075
2076 #. type: TP
2077 #: debconf.conf.5:48
2078 #, no-wrap
2079 msgid "B<Priority>"
2080 msgstr "B<Priority>"
2081
2082 #. type: Plain text
2083 #: debconf.conf.5:52
2084 msgid ""
2085 "The priority Debconf should use, overriding any priority set in the debconf "
2086 "database."
2087 msgstr ""
2088 "La prioridad que Debconf debería usar, anulando cualquier prioridad definida "
2089 "en la base de datos de debconf."
2090
2091 #. type: TP
2092 #: debconf.conf.5:52
2093 #, no-wrap
2094 msgid "B<Admin-Email>"
2095 msgstr "B<Admin-Email>"
2096
2097 #. type: Plain text
2098 #: debconf.conf.5:59
2099 msgid ""
2100 "The email address Debconf should send mail to if it needs to make sure that "
2101 "the admin has seen an important message. Defaults to \"root\", but can be "
2102 "set to any valid email address to send the mail there. If you prefer to "
2103 "never have debconf send you mail, specify a blank address. This can be "
2104 "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable."
2105 msgstr ""
2106 "La dirección de correo electrónico al que Debconf debería enviar un correo "
2107 "para asegurar que el administrador ve un mensaje de importancia. El valor "
2108 "predefinido es «root», pero puede definir cualquier dirección de correo "
2109 "electrónico válido al que enviar el correo. Si desea que debconf nunca le "
2110 "mande un correo, deje un espacio en blanco en lugar de una dirección. Esto "
2111 "se puede anular en el momento con la variable de entorno "
2112 "«DEBCONF_ADMIN_EMAIL»."
2113
2114 #. type: Plain text
2115 #: debconf.conf.5:59 debconf.conf.5:395
2116 #, no-wrap
2117 msgid "B<Debug>"
2118 msgstr "B<Debug>"
2119
2120 #. type: Plain text
2121 #: debconf.conf.5:67
2122 msgid ""
2123 "If set, this will cause debconf to output debugging information to standard "
2124 "error. The value it is set to can be something like \"user\", \"developer\", "
2125 "\"db\", or a regular expression. Typically, rather than setting it "
2126 "permanently in a config file, you will only want to temporarily turn on "
2127 "debugging, and the DEBCONF_DEBUG environment variable can be set instead to "
2128 "accomplish that."
2129 msgstr ""
2130 "Si se define, hará que debconf muestre información de depuración a través de "
2131 "la salida de error estándar. El valor con el que se define puede ser algo "
2132 "como «user», «developer», «db» o una expresión regular. Habitualmente, "
2133 "querrá activar la depuración sólo ocasionalmente en lugar de definirlo "
2134 "permanentemente en el fichero de configuración. Para ello puede definir la "
2135 "variable de entorno «DEBCONF_DEBUG»."
2136
2137 #. type: TP
2138 #: debconf.conf.5:67
2139 #, no-wrap
2140 msgid "B<NoWarnings>"
2141 msgstr "B<NoWarnings>"
2142
2143 #. type: Plain text
2144 #: debconf.conf.5:72
2145 msgid ""
2146 "If set, this will make debconf not display warnings about various things. "
2147 "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment "
2148 "variable."
2149 msgstr ""
2150 "Si se define, evitará que debconf muestre avisos relacionados con varios "
2151 "eventos. Puede anular esto en el momento con la variable de entorno "
2152 "«DEBCONF_NOWARNINGS»."
2153
2154 #. type: TP
2155 #: debconf.conf.5:72
2156 #, no-wrap
2157 msgid "B<Log>"
2158 msgstr "B<Log>"
2159
2160 #. type: Plain text
2161 #: debconf.conf.5:77
2162 msgid ""
2163 "Makes debconf log debugging information as it runs, to the syslog. The value "
2164 "it is set to controls that is logged. See Debug, above for an explanation of "
2165 "the values that can be set to control what is logged."
2166 msgstr ""
2167 "Hace que debconf registre la información de depuración en el registro del "
2168 "sistema («syslog») durante la ejecución. El valor con el que se define "
2169 "controla qué se registra. Consulte «Debug», más arriba, para una explicación "
2170 "de los valores que se pueden definir para controlar lo que se registra."
2171
2172 #. type: TP
2173 #: debconf.conf.5:77
2174 #, no-wrap
2175 msgid "B<Terse>"
2176 msgstr "B<Terse>"
2177
2178 #. type: Plain text
2179 #: debconf.conf.5:82
2180 msgid ""
2181 "If set to \"true\", makes some debconf frontends use a special terse display "
2182 "mode that outputs as little as possible. Defaults to false. Terse mode may "
2183 "be temporarily set via the DEBCONF_TERSE environment variable."
2184 msgstr ""
2185 "Si se define con «true» (verdadero), hará que algunas interfaces de debconf "
2186 "usen un modo conciso («terse») que muestra en la salida la mínima "
2187 "información posible. «false» por omisión. El modo conciso se puede activar "
2188 "temporalmente mediante la variable de entorno «DEBCONF_TERSE»."
2189
2190 #. type: Plain text
2191 #: debconf.conf.5:87
2192 #, no-wrap
2193 msgid ""
2194 "For example, the first stanza of a file might look like this:\n"
2195 " Config: configdb\n"
2196 " Templates: templatedb\n"
2197 msgstr ""
2198 "Por ejemplo, la primera definición de un fichero puede tener este aspecto:\n"
2199 " Config: configuración-base-de-datos\n"
2200 " Templates: base-de-datos-de-plantillas\n"
2201
2202 #. type: Plain text
2203 #: debconf.conf.5:91
2204 #, no-wrap
2205 msgid ""
2206 "Each remaining stanza in the file sets up a database. A database stanza\n"
2207 "begins by naming the database:\n"
2208 " Name: configdb\n"
2209 msgstr ""
2210 "Cada definición restante en el fichero configura una base de datos. Una\n"
2211 "definición de una base de datos empieza denominando la base de datos:\n"
2212 " Name: configuración-base-de-datos\n"
2213
2214 #. type: Plain text
2215 #: debconf.conf.5:95
2216 #, no-wrap
2217 msgid ""
2218 "Then it indicates what database driver should be used for this database.\n"
2219 "See DRIVERS, below, for information about what drivers are available.\n"
2220 " Driver: File\n"
2221 msgstr ""
2222 "Después, se indica el controlador que se debería usar para esta base de\n"
2223 "datos. Consulte «CONTROLADORES», más abajo, para información acerca de los\n"
2224 "controladores disponibles.\n"
2225 " Driver: File\n"
2226
2227 #. type: Plain text
2228 #: debconf.conf.5:100
2229 #, no-wrap
2230 msgid ""
2231 "You can indicate that the database is not essential to the proper\n"
2232 "functioning of debconf by saying it is not required. This will make debconf\n"
2233 "muddle on if the database fails for some reason.\n"
2234 " Required: false\n"
2235 msgstr ""
2236 "Puede indicar que la base de datos no es esencial para el correcto\n"
2237 "funcionamiento de debconf indicando que no es obligatorio. Esto\n"
2238 "hará que debconf prosiga en el caso de que la base de datos falle.\n"
2239 " Required: false\n"
2240
2241 #. type: Plain text
2242 #: debconf.conf.5:104
2243 #, no-wrap
2244 msgid ""
2245 "You can mark any database as readonly and debconf will not write anything\n"
2246 "to it.\n"
2247 " Readonly: true\n"
2248 msgstr ""
2249 "Puede marcar la base de datos como de sólo lectura, y debconf no escribirá\n"
2250 "nada en él.\n"
2251 " Readonly: true\n"
2252
2253 #. type: Plain text
2254 #: debconf.conf.5:107
2255 msgid ""
2256 "You can also limit what types of data can go into the database with Accept- "
2257 "and Reject- lines; see ACCESS CONTROLS, below."
2258 msgstr ""
2259 "También puede limitar el tipo de datos que pueden entrar en la base de datos "
2260 "con las líneas «Accept-» y «Reject-»; consulte más abajo la sección "
2261 "«CONTROLES DE ACCESO»."
2262
2263 #. type: Plain text
2264 #: debconf.conf.5:112
2265 #, no-wrap
2266 msgid ""
2267 "The remainder of each database stanza is used to provide configuration\n"
2268 "specific to that driver. For example, the Text driver needs to know\n"
2269 "a directory to put the database in, so you might say:\n"
2270 " Filename: /var/cache/debconf/config.dat\n"
2271 msgstr ""
2272 "El resto de la definición de cada base de datos se usará para proporcionar\n"
2273 "información específica de ese controlador. Por ejemplo, el controlador\n"
2274 "«Text» necesita conocer el directorio donde alojar\n"
2275 "la base de datos, así que podría usar:\n"
2276 " Filename: /var/cache/debconf/config.dat\n"
2277
2278 #. type: SH
2279 #: debconf.conf.5:112
2280 #, no-wrap
2281 msgid "DRIVERS"
2282 msgstr "CONTROLADORES"
2283
2284 #. type: Plain text
2285 #: debconf.conf.5:119
2286 msgid ""
2287 "A number of drivers are available, and more can be written with little "
2288 "difficulty. Drivers come in two general types. First there are real drivers "
2289 "-- drivers that actually access and store data in some kind of database, "
2290 "which might be on the local filesystem, or on a remote system. Then there "
2291 "are meta-drivers that combine other drivers together to form more "
2292 "interesting systems. Let's start with the former."
2293 msgstr ""
2294 "Dispone de un gran número de controladores («drivers»), y puede escribir más "
2295 "con poca dificultad. Los controladores son de dos tipos generales. Primero "
2296 "están los controladores reales; controladores que acceden y guardan datos de "
2297 "forma directa en algún tipo de base de datos, el cual puede estar en el "
2298 "sistema de ficheros actual o en un sistema remoto. Después están los "
2299 "metacontroladores, que combinan otros controladores para así crear sistemas "
2300 "más interesantes. Vamos a empezar con el primero."
2301
2302 #. type: TP
2303 #: debconf.conf.5:120
2304 #, no-wrap
2305 msgid "B<File>"
2306 msgstr "B<File>"
2307
2308 #. type: Plain text
2309 #: debconf.conf.5:127
2310 msgid ""
2311 "This database driver allows debconf to store a whole database in a single "
2312 "flat text file. This makes it easy to archive, transfer between machines, "
2313 "and edit. It is one of the more compact database formats in terms of disk "
2314 "space used. It is also one of the slowest."
2315 msgstr ""
2316 "Este controlador de base de datos permite que debconf guarde una base de "
2317 "datos completa en un único fichero de texto simple. Esto facilita su "
2318 "archivado, transferencia entre máquinas y edición. Es uno de los formatos de "
2319 "base de datos más compacto en términos del espacio en disco que usa. También "
2320 "es uno de los más lentos."
2321
2322 #. type: Plain text
2323 #: debconf.conf.5:130
2324 msgid ""
2325 "On the downside, the entire file has to be read in each time debconf starts "
2326 "up, and saving it is also slow."
2327 msgstr ""
2328 "La desventaja es que el fichero se tiene que leer por completo cada vez que "
2329 "debconf arranca, y el acto de guardar también es lento."
2330
2331 #. type: Plain text
2332 #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309
2333 msgid "The following things are configurable for this driver."
2334 msgstr "Puede configurar las siguientes opciones de este controlador."
2335
2336 #. type: TP
2337 #: debconf.conf.5:133
2338 #, no-wrap
2339 msgid "B<Filename>"
2340 msgstr "B<Filename>"
2341
2342 #. type: Plain text
2343 #: debconf.conf.5:136
2344 msgid "The file to use as the database. This is a required field."
2345 msgstr "El fichero a usar como base de datos. Este campo es obligatorio."
2346
2347 #. type: TP
2348 #: debconf.conf.5:136 debconf.conf.5:203
2349 #, no-wrap
2350 msgid "B<Mode>"
2351 msgstr "B<Mode>"
2352
2353 #. type: Plain text
2354 #: debconf.conf.5:140
2355 msgid ""
2356 "The permissions to create the file with if it does not exist. Defaults to "
2357 "600, since the file could contain passwords in some circumstances."
2358 msgstr ""
2359 "Los permisos a otorgar al fichero en caso de que no existe. El valor por "
2360 "omisión es 600, ya que en algunos casos el fichero puede contener "
2361 "contraseñas."
2362
2363 #. type: TP
2364 #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310
2365 #, no-wrap
2366 msgid "B<Format>"
2367 msgstr "B<Format>"
2368
2369 #. type: Plain text
2370 #: debconf.conf.5:144 debconf.conf.5:180
2371 msgid ""
2372 "The format of the file. See FORMATS below. Defaults to using a rfc-822 like "
2373 "format."
2374 msgstr ""
2375 "El formato del fichero. Consulte «FORMATOS» más abajo. El valor por omisión "
2376 "es un formato tipo rfc-822."
2377
2378 #. type: Plain text
2379 #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371
2380 #, no-wrap
2381 msgid "B<Backup>"
2382 msgstr "B<Backup>"
2383
2384 #. type: Plain text
2385 #: debconf.conf.5:148 debconf.conf.5:184
2386 msgid ""
2387 "Whether a backup should be made of the old file before changing it. "
2388 "Defaults to true."
2389 msgstr ""
2390 "Si se debería crear una copia de respaldo del fichero antiguo antes de "
2391 "modificarlo. «true» por omisión."
2392
2393 #. type: Plain text
2394 #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209
2395 msgid "As example stanza setting up a database using this driver:"
2396 msgstr ""
2397 "Una definición de ejemplo configurando una base de datos con este "
2398 "controlador:"
2399
2400 #. type: Plain text
2401 #: debconf.conf.5:155
2402 #, no-wrap
2403 msgid ""
2404 " Name: mydb\n"
2405 " Driver: File\n"
2406 " Filename: /var/cache/debconf/mydb.dat\n"
2407 msgstr ""
2408 " Name: mi-base-de-datos\n"
2409 " Driver: File\n"
2410 " Filename: /var/cache/debconf/mydb.dat\n"
2411
2412 #. type: TP
2413 #: debconf.conf.5:156
2414 #, no-wrap
2415 msgid "B<DirTree>"
2416 msgstr "B<DirTree>"
2417
2418 #. type: Plain text
2419 #: debconf.conf.5:166
2420 msgid ""
2421 "This database driver allows debconf to store data in a hierarchical "
2422 "directory structure. The names of the various debconf templates and "
2423 "questions are used as-is to form directories with files in them. This format "
2424 "for the database is the easiest to browse and fiddle with by hand. It has "
2425 "very good load and save speeds. It also typically occupies the most space, "
2426 "since a lot of small files and subdirectories do take up some additional "
2427 "room."
2428 msgstr ""
2429 "Este controlador de base de datos permite a debconf guardar datos en una "
2430 "estructura jerárquica de directorios. Los nombres de las diferentes "
2431 "plantillas de debconf y preguntas se usan literalmente para crear los "
2432 "directorios que contienen ficheros. El formato de esta base de datos es la "
2433 "más fácil de explorar y manipular directamente. Tiene una gran velocidad de "
2434 "carga y guardado de datos. Habitualmente, es el que ocupa más espacio, ya "
2435 "que varios ficheros pequeños y subdirectorios toman un espacio adicional."
2436
2437 #. type: TP
2438 #: debconf.conf.5:169
2439 #, no-wrap
2440 msgid "B<Directory>"
2441 msgstr "B<Directory>"
2442
2443 #. type: Plain text
2444 #: debconf.conf.5:172
2445 msgid "The directory to put the files in. Required."
2446 msgstr "El directorio donde guardar los ficheros. Obligatorio."
2447
2448 #. type: TP
2449 #: debconf.conf.5:172
2450 #, no-wrap
2451 msgid "B<Extension>"
2452 msgstr "B<Extension>"
2453
2454 #. type: Plain text
2455 #: debconf.conf.5:176
2456 msgid ""
2457 "An extension to add to the names of files. Must be set to a non-empty "
2458 "string; defaults to \".dat\""
2459 msgstr ""
2460 "La extensión a añadir a los nombres de fichero. Se debe definir con una "
2461 "cadena no vacía: «.dat» por omisión."
2462
2463 #. type: Plain text
2464 #: debconf.conf.5:192
2465 #, no-wrap
2466 msgid ""
2467 " Name: mydb\n"
2468 " Driver: DirTree\n"
2469 " Directory: /var/cache/debconf/mydb\n"
2470 " Extension: .txt\n"
2471 msgstr ""
2472 " Name: mi-base-de-datos\n"
2473 " Driver: DirTree\n"
2474 " Directory: /var/cache/debconf/mydb\n"
2475 " Extension: .txt\n"
2476
2477 #. type: TP
2478 #: debconf.conf.5:193
2479 #, no-wrap
2480 msgid "B<PackageDir>"
2481 msgstr "B<PackageDir>"
2482
2483 #. type: Plain text
2484 #: debconf.conf.5:200
2485 msgid ""
2486 "This database driver is a compromise between the File and DirTree databases. "
2487 "It uses a directory, in which there is (approximately) one file per package "
2488 "that uses debconf. This is fairly fast, while using little more room than "
2489 "the File database driver."
2490 msgstr ""
2491 "Este controlador de base de datos es un arreglo entre las bases de datos "
2492 "«File» y «DirTree». Usa un directorio en el que hay, aproximadamente, un "
2493 "fichero por cada paquete que usa debconf. Es habitualmente rápido, aunque "
2494 "toma más espacio que el controlador de base de datos «File»."
2495
2496 #. type: Plain text
2497 #: debconf.conf.5:203
2498 msgid ""
2499 "This driver is configurable in the same ways as is the DirTree driver, plus:"
2500 msgstr ""
2501 "Este controlador se puede configurar de la misma forma que el controlador "
2502 "«DirTree», y también acepta lo siguiente:"
2503
2504 #. type: Plain text
2505 #: debconf.conf.5:207
2506 msgid ""
2507 "The permissions to create files with. Defaults to 600, since the files could "
2508 "contain passwords in some circumstances."
2509 msgstr ""
2510 "Los permisos a otorgar al fichero. El valor por omisión es 600, ya que en "
2511 "algunos casos los ficheros pueden contener contraseñas."
2512
2513 #. type: Plain text
2514 #: debconf.conf.5:213
2515 #, no-wrap
2516 msgid ""
2517 " Name: mydb\n"
2518 " Driver: PackageDir\n"
2519 " Directory: /var/cache/debconf/mydb\n"
2520 msgstr ""
2521 " Name: mi-base-de-datos\n"
2522 " Driver: PackageDir\n"
2523 " Directory: /var/cache/debconf/mydb\n"
2524
2525 #. type: TP
2526 #: debconf.conf.5:214
2527 #, no-wrap
2528 msgid "B<LDAP>"
2529 msgstr "B<LDAP>"
2530
2531 #. type: Plain text
2532 #: debconf.conf.5:218
2533 msgid ""
2534 "WARNING: This database driver is currently experimental. Use with caution."
2535 msgstr ""
2536 "AVISO: Este controlador de base de datos está aún en una fase experimental. "
2537 "Usar con precaución."
2538
2539 #. type: Plain text
2540 #: debconf.conf.5:226
2541 msgid ""
2542 "This database driver accesses a LDAP directory for debconf configuration "
2543 "data. Due to the nature of the beast, LDAP directories should typically be "
2544 "accessed in read-only mode. This is because multiple accesses can take "
2545 "place, and it's generally better for data consistency if nobody tries to "
2546 "modify the data while this is happening. Of course, write access is "
2547 "supported for those cases where you do want to update the config data in the "
2548 "directory."
2549 msgstr ""
2550 "Este controlador de base de datos accede a un directorio LDAP para los datos "
2551 "de configuración de debconf. Debido a la naturaleza de la bestia, se debería "
2552 "acceder a directorios LDAP en modo de sólo lectura. Esto se debe a que puede "
2553 "que acceda varias veces simultáneamente, y es generalmente beneficioso para "
2554 "la consistencia de los datos si nadie intenta modificarlos mientras esto "
2555 "ocurre. Por supuesto, se permite el acceso para la escritura en aquellos "
2556 "casos en los que desea actualizar los datos de configuración en ese "
2557 "directorio."
2558
2559 #. type: Plain text
2560 #: debconf.conf.5:229
2561 msgid ""
2562 "For information about setting up a LDAP server for debconf, read /usr/share/"
2563 "doc/debconf-doc/README.LDAP (from the debconf-doc package)."
2564 msgstr ""
2565 "Para más información acerca de como configurar un servidor LDAP para "
2566 "debconf, consulte «/usr/share/doc/debconf-doc/README.LDAP», en el paquete "
2567 "debconf-doc."
2568
2569 #. type: Plain text
2570 #: debconf.conf.5:232
2571 msgid ""
2572 "To use this database driver, you must have the libnet-ldap-perl package "
2573 "installed. Debconf suggests that package, but does not depend on it."
2574 msgstr ""
2575 "Necesita instalar el paquete libnet-ldap-perl para usar este controlador de "
2576 "base de datos. Debconf sugiere ese paquete, pero no depende de él."
2577
2578 #. type: Plain text
2579 #: debconf.conf.5:236
2580 msgid ""
2581 "Please carefully consider the security implications of using a remote "
2582 "debconf database. Unless you trust the source, and you trust the intervening "
2583 "network, it is not a very safe thing to do."
2584 msgstr ""
2585 "Considere cuidadosamente las implicaciones de seguridad de usar una base de "
2586 "datos remota de debconf. No es algo muy seguro a menos que confíe en la "
2587 "fuente y la red mediadora."
2588
2589 #. type: TP
2590 #: debconf.conf.5:239
2591 #, no-wrap
2592 msgid "B<server>"
2593 msgstr "B<server>"
2594
2595 #. type: Plain text
2596 #: debconf.conf.5:242
2597 msgid "The host name or IP address of an LDAP server to connect to."
2598 msgstr ""
2599 "El nombre de sistema o dirección IP de un servidor LDAP al que conectarse."
2600
2601 #. type: TP
2602 #: debconf.conf.5:242
2603 #, no-wrap
2604 msgid "B<port>"
2605 msgstr "B<port>"
2606
2607 #. type: Plain text
2608 #: debconf.conf.5:246
2609 msgid ""
2610 "The port on which to connect to the LDAP server. If none is given, the "
2611 "default port is used."
2612 msgstr ""
2613 "El puerto con el que conectarse al servidor LDAP. Si no se proporciona "
2614 "ninguno, se usa el puerto predefinido."
2615
2616 #. type: TP
2617 #: debconf.conf.5:246
2618 #, no-wrap
2619 msgid "B<basedn>"
2620 msgstr "B<basedn>"
2621
2622 #. type: Plain text
2623 #: debconf.conf.5:251
2624 msgid ""
2625 "The DN under which all config items will be stored. Each config item will be "
2626 "assumed to live in a DN of cn=E<lt>item nameE<gt>,E<lt>Base DNE<gt>. If this "
2627 "structure is not followed, all bets are off."
2628 msgstr ""
2629 "El nombre distinitivo (DN, «Distinguished name») bajo el cual se guardarán "
2630 "todos los elementos de configuración. Se supondrá que cada elemento de "
2631 "configuración se aloja en un DN tipo cn=E<lt>elemento nombreE<gt>,E<lt>Base "
2632 "DNE<gt>. Si no sigue esta estructura, todo estará perdido."
2633
2634 #. type: TP
2635 #: debconf.conf.5:251
2636 #, no-wrap
2637 msgid "B<binddn>"
2638 msgstr "B<binddn>"
2639
2640 #. type: Plain text
2641 #: debconf.conf.5:255
2642 msgid ""
2643 "The DN to bind to the directory as. Anonymous bind will be used if none is "
2644 "specified."
2645 msgstr ""
2646 "El DN con el que unirse («bind») con el directorio. Si no se define, se "
2647 "usará una unión anónima."
2648
2649 #. type: TP
2650 #: debconf.conf.5:255
2651 #, no-wrap
2652 msgid "B<bindpasswd>"
2653 msgstr "B<bindpasswd>"
2654
2655 #. type: Plain text
2656 #: debconf.conf.5:259
2657 msgid ""
2658 "The password to use in an authenticated bind (used with binddn, above). If "
2659 "not specified, anonymous bind will be used."
2660 msgstr ""
2661 "La contraseña a usar en una unión identificada (usar con binddn, más "
2662 "arriba). Si no se define, se usará una unión anónima."
2663
2664 #. type: Plain text
2665 #: debconf.conf.5:265
2666 msgid ""
2667 "This option should not be used in the general case. Anonymous binding should "
2668 "be sufficient most of the time for read-only access. Specifying a bind DN "
2669 "and password should be reserved for the occasional case where you wish to "
2670 "update the debconf configuration data."
2671 msgstr ""
2672 "No se debería usar esta opción para el uso general. La unión anónima debería "
2673 "ser suficiente en la mayoría de los casos para el acceso de sólo lectura. "
2674 "Definir un DN de unión y contraseña se debería reservar para el caso "
2675 "ocasional en el que desea actualizar la configuración de los datos de "
2676 "debconf."
2677
2678 #. type: TP
2679 #: debconf.conf.5:266
2680 #, no-wrap
2681 msgid "B<keybykey>"
2682 msgstr "B<keybykey>"
2683
2684 #. type: Plain text
2685 #: debconf.conf.5:272
2686 msgid ""
2687 "Enable access to individual LDAP entries, instead of fetching them all at "
2688 "once in the beginning. This is very useful if you want to monitor your LDAP "
2689 "logs for specific debconf keys requested. In this way, you could also write "
2690 "custom handling code on the LDAP server part."
2691 msgstr ""
2692 "Activa el acceso a entradas LDAP individuales, en lugar de obtenerlos todos "
2693 "a la vez al inicio. Esto es útil cuando desea supervisar los registros de "
2694 "LDAP para claves de debconf solicitadas explícitamente. De esta manera, "
2695 "también puede escribir código de control personalizado en la parte del "
2696 "servidor LDAP."
2697
2698 #. type: Plain text
2699 #: debconf.conf.5:279
2700 msgid ""
2701 "Note that when this option is enabled, the connection to the LDAP server is "
2702 "kept active during the whole Debconf run. This is a little different from "
2703 "the all-in-one behavior where two brief connections are made to LDAP; in the "
2704 "beginning to retrieve all the entries, and in the end to save eventual "
2705 "changes."
2706 msgstr ""
2707 "Tenga en cuenta que cuando esta opción está activada, la conexión con el "
2708 "servidor LDAP se mantiene activa durante la ejecución de Debconf. Es un poco "
2709 "diferente del comportamiento «all-in-one» (todo en uno) en el que se "
2710 "realizan dos breves conexiones a LDAP; una al principio para obtener todas "
2711 "las entradas, y otra al final para guardar cambios eventuales."
2712
2713 #. type: Plain text
2714 #: debconf.conf.5:284
2715 msgid ""
2716 "An example stanza setting up a database using this driver, assuming the "
2717 "remote database is on example.com and can be accessed anonymously:"
2718 msgstr ""
2719 "Esta es una definición de ejemplo que configura una base de datos usando "
2720 "este controlador, suponiendo que la base de datos remota está en «example."
2721 "com», y que permite el acceso anónimo:"
2722
2723 #. type: Plain text
2724 #: debconf.conf.5:291
2725 #, no-wrap
2726 msgid ""
2727 " Name: ldapdb\n"
2728 " Driver: LDAP\n"
2729 " Readonly: true\n"
2730 " Server: example.com\n"
2731 " BaseDN: cn=debconf,dc=example,dc=com\n"
2732 " KeyByKey: 0\n"
2733 msgstr ""
2734 " Name: base-de-datos-ldap\n"
2735 " Driver: LDAP\n"
2736 " Readonly: true\n"
2737 " Server: example.com\n"
2738 " BaseDN: cn=debconf,dc=example,dc=com\n"
2739 " KeyByKey: 0\n"
2740
2741 #. type: Plain text
2742 #: debconf.conf.5:294
2743 msgid ""
2744 "Another example, this time the LDAP database is on localhost, and can be "
2745 "written to:"
2746 msgstr ""
2747 "Otro ejemplo, esta vez la base de datos LDAP está en el sistema local "
2748 "(«localhost»), y que permite su escritura:"
2749
2750 #. type: Plain text
2751 #: debconf.conf.5:301
2752 #, no-wrap
2753 msgid ""
2754 " Name: ldapdb\n"
2755 " Driver: LDAP\n"
2756 " Server: localhost\n"
2757 " BaseDN: cn=debconf,dc=domain,dc=com\n"
2758 " BindPasswd: secret\n"
2759 " KeyByKey: 1\n"
2760 msgstr ""
2761 " Name: base-de-datos-ldap\n"
2762 " Driver: LDAP\n"
2763 " Server: localhost\n"
2764 " BaseDN: cn=debconf,dc=domain,dc=com\n"
2765 " BindPasswd: secret\n"
2766 " KeyByKey: 1\n"
2767
2768 #. type: TP
2769 #: debconf.conf.5:302
2770 #, no-wrap
2771 msgid "B<Pipe>"
2772 msgstr "B<Pipe>"
2773
2774 #. type: Plain text
2775 #: debconf.conf.5:307
2776 msgid ""
2777 "This special-purpose database driver reads and writes the database from "
2778 "standard input/output. It may be useful for people with special needs."
2779 msgstr ""
2780 "Este controlador de base de datos de propósito especial permite leer y "
2781 "escribir la base de datos desde la entrada y salida estándar. Puede ser útil "
2782 "para las personas con necesidades especiales."
2783
2784 #. type: Plain text
2785 #: debconf.conf.5:314
2786 msgid ""
2787 "The format to read and write. See FORMATS below. Defaults to using a rfc-822 "
2788 "like format."
2789 msgstr ""
2790 "El formato en el que leer y escribir. Consulte «FORMATOS» a continuación. El "
2791 "valor por omisión es un formato tipo rfc-822."
2792
2793 #. type: TP
2794 #: debconf.conf.5:314
2795 #, no-wrap
2796 msgid "B<Infd>"
2797 msgstr "B<Infd>"
2798
2799 #. type: Plain text
2800 #: debconf.conf.5:318
2801 msgid ""
2802 "File descriptor number to read from. Defaults to reading from stdin. If set "
2803 "to \"none\", the database will not read any data on startup."
2804 msgstr ""
2805 "El número del descriptor de fichero desde el que leer. Lee la entrada "
2806 "estándar por omisión. Si se define con «none» (ninguno), la base de datos no "
2807 "leerá ningún dato en el arranque."
2808
2809 #. type: TP
2810 #: debconf.conf.5:318
2811 #, no-wrap
2812 msgid "B<Outfd>"
2813 msgstr "B<Outfd>"
2814
2815 #. type: Plain text
2816 #: debconf.conf.5:322
2817 msgid ""
2818 "File descriptor number to write to. Defaults to writing to stdout. If set to "
2819 "\"none\", the database will be thrown away on shutdown."
2820 msgstr ""
2821 "El número del descriptor de fichero al que escribir. Escribe por la salida "
2822 "estándar por omisión. Si se define con «none» (ninguno), la base de datos se "
2823 "desechará al apagar."
2824
2825 #. type: Plain text
2826 #: debconf.conf.5:326
2827 msgid "That's all of the real drivers, now moving on to meta-drivers.."
2828 msgstr ""
2829 "Estos son todos los controladores reales, pasemos ahora a los "
2830 "metacontroladores."
2831
2832 #. type: TP
2833 #: debconf.conf.5:326 debconf.conf.5:354
2834 #, no-wrap
2835 msgid "B<Stack>"
2836 msgstr "B<Stack>"
2837
2838 #. type: Plain text
2839 #: debconf.conf.5:335
2840 msgid ""
2841 "This driver stacks up a number of other databases (of any type), and allows "
2842 "them to be accessed as one. When debconf asks for a value, the first "
2843 "database on the stack that contains the value returns it. If debconf writes "
2844 "something to the database, the write normally goes to the first driver on "
2845 "the stack that has the item debconf is modifying, and if none do, the new "
2846 "item is added to the first writable database on the stack."
2847 msgstr ""
2848 "Este controlador apila un número de bases de datos de cualquier tipo, y "
2849 "permite el acceso como si fuesen una única base de datos. Cuando debconf "
2850 "solicita un valor, la primera base de datos en la pila que contiene el valor "
2851 "lo devuelve. Si debconf escribe en la base de datos, lo escrito, "
2852 "generalmente, se guarda en el primer controlador de la pila que contiene el "
2853 "elemento que debconf está modificando, y si ninguno lo tiene, el elemento "
2854 "nuevo se añade a la primera base de datos en la pila que permita su "
2855 "escritura."
2856
2857 #. type: Plain text
2858 #: debconf.conf.5:343
2859 msgid ""
2860 "Things become more interesting if one of the databases on the stack is "
2861 "readonly. Consider a stack of the databases foo, bar, and baz, where foo and "
2862 "baz are both readonly. Debconf wants to change an item, and this item is "
2863 "only present in baz, which is readonly. The stack driver is smart enough to "
2864 "realize that won't work, and it will copy the item from baz to bar, and the "
2865 "write will take place in bar. Now the item in baz is shadowed by the item in "
2866 "bar, and it will not longer be visible to debconf."
2867 msgstr ""
2868 "La cosa se pone más interesante si una de las bases de datos de la pila es "
2869 "de sólo lectura. Suponga una pila de bases de datos foo, bar y baz, donde "
2870 "foo y baz son de sólo lectura. Debconf desea modificar un elemento, y este "
2871 "elemento sólo está presente en baz, de sólo lectura. El controlador «stack» "
2872 "es suficientemente inteligente como para darse cuenta de que no funcionará, "
2873 "y copiará el elemento de baz a bar, donde tomará lugar la escritura. Ahora "
2874 "el elemento en baz está oculto por el elemento en bar, y ya nunca será "
2875 "visible para debconf."
2876
2877 #. type: Plain text
2878 #: debconf.conf.5:350
2879 msgid ""
2880 "This kind of thing is particularly useful if you want to point many systems "
2881 "at a central, readonly database, while still allowing things to be "
2882 "overridden on each system. When access controls are added to the picture, "
2883 "stacks allow you to do many other interesting things, like redirect all "
2884 "passwords to one database while a database underneath it handles everything "
2885 "else."
2886 msgstr ""
2887 "Este tipo de cosas son particularmente útiles cuando desea que muchos "
2888 "sistemas se relacionen con una base de datos central de sólo lectura, a la "
2889 "vez que permite que ciertas cosas sean anuladas en cada sistema. Cuando "
2890 "añade los controles de acceso al dibujo, las pilas permiten hacer otras "
2891 "cosas interesantes, como redirigir todas las contraseñas a una sola base de "
2892 "datos, mientras que otra base de datos inferior en la pila gestiona todo lo "
2893 "demás."
2894
2895 #. type: Plain text
2896 #: debconf.conf.5:352
2897 msgid "Only one piece of configuration is needed to set up a stack:"
2898 msgstr "Sólo se necesita un elemento de configuración para crear una pila:"
2899
2900 #. type: Plain text
2901 #: debconf.conf.5:358
2902 msgid ""
2903 "This is where you specify a list of other databases, by name, to tell it "
2904 "what makes up the stack."
2905 msgstr ""
2906 "Aquí es donde define la lista de bases de datos por nombre, para indicar qué "
2907 "compone la pila."
2908
2909 #. type: Plain text
2910 #: debconf.conf.5:361 debconf.conf.5:387
2911 msgid "For example:"
2912 msgstr "Por ejemplo:"
2913
2914 #. type: Plain text
2915 #: debconf.conf.5:365
2916 #, no-wrap
2917 msgid ""
2918 " Name: megadb\n"
2919 " Driver: stack\n"
2920 " Stack: passworddb, configdb, companydb\n"
2921 msgstr ""
2922 " Name: mega-base-de-datos\n"
2923 " Driver: stack\n"
2924 " Stack: contraseña-base-de-datos, configuración-base-de-datos compañía-base-de-datos\n"
2925
2926 #. type: Plain text
2927 #: debconf.conf.5:368
2928 msgid ""
2929 "WARNING: The stack driver is not very well tested yet. Use at your own risk."
2930 msgstr ""
2931 "AVISO: El controlador «stack» aún no está bien comprobado. Utilice bajo su "
2932 "propio riesgo."
2933
2934 #. type: Plain text
2935 #: debconf.conf.5:374
2936 msgid ""
2937 "This driver passes all requests on to another database driver. But it also "
2938 "copies all write requests to a backup database driver."
2939 msgstr ""
2940 "Este controlador introduce todas las peticiones a otro controlador de base "
2941 "de datos. Pero también copia todas las peticiones de escritura a un "
2942 "controlador de base de datos de respaldo."
2943
2944 #. type: Plain text
2945 #: debconf.conf.5:376 debconf.conf.5:400
2946 msgid "You must specify the following fields to set up this driver:"
2947 msgstr "Debe definir los siguientes campos para configurar este controlador:"
2948
2949 #. type: TP
2950 #: debconf.conf.5:378 debconf.conf.5:402
2951 #, no-wrap
2952 msgid "B<Db>"
2953 msgstr "B<Db>"
2954
2955 #. type: Plain text
2956 #: debconf.conf.5:381 debconf.conf.5:405
2957 msgid "The database to read from and write to."
2958 msgstr "La base de datos desde la que leer y escribir."
2959
2960 #. type: TP
2961 #: debconf.conf.5:381
2962 #, no-wrap
2963 msgid "B<Backupdb>"
2964 msgstr "B<Backupdb>"
2965
2966 #. type: Plain text
2967 #: debconf.conf.5:384
2968 msgid "The name of the database to send copies of writes to."
2969 msgstr ""
2970 "El nombre de la base de datos a la que enviar copias de los datos escritos."
2971
2972 #. type: Plain text
2973 #: debconf.conf.5:392
2974 #, no-wrap
2975 msgid ""
2976 " Name: backup\n"
2977 " Driver: Backup\n"
2978 " Db: mydb\n"
2979 " Backupdb: mybackupdb\n"
2980 msgstr ""
2981 " Name: respaldo\n"
2982 " Driver: Backup\n"
2983 " Db: mi-base-de-datos\n"
2984 " Backupdb: mi-base-de-datos-de-respaldo\n"
2985
2986 #. type: Plain text
2987 #: debconf.conf.5:398
2988 msgid ""
2989 "This driver passes all requests on to another database driver, outputting "
2990 "verbose debugging output about the request and the result."
2991 msgstr ""
2992 "Este controlador introduce todas las peticiones a otro controlador de base "
2993 "de datos, mostrando información detallada de depuración acerca de la "
2994 "solicitud y el resultado."
2995
2996 #. type: SH
2997 #: debconf.conf.5:407
2998 #, no-wrap
2999 msgid "ACCESS CONTROLS"
3000 msgstr "CONTROLES DE ACCESO"
3001
3002 #. type: Plain text
3003 #: debconf.conf.5:411
3004 msgid ""
3005 "When you set up a database, you can also use some fields to specify access "
3006 "controls. You can specify that a database only accepts passwords, for "
3007 "example, or make a database only accept things with \"foo\" in their name."
3008 msgstr ""
3009 "Cuando configura una base de datos, también puede usar algunos campos para "
3010 "definir los controles de acceso. Puede definir que una base de datos sólo "
3011 "acepte contraseñas, por ejemplo, o hacer que una base de datos sólo acepte "
3012 "elementos con «foo» en su nombre."
3013
3014 #. type: TP
3015 #: debconf.conf.5:411
3016 #, no-wrap
3017 msgid "B<Readonly>"
3018 msgstr "B<Readonly>"
3019
3020 #. type: Plain text
3021 #: debconf.conf.5:416
3022 msgid ""
3023 "As was mentioned earlier, this access control, if set to \"true\", makes a "
3024 "database readonly. Debconf will read values from it, but will never write "
3025 "anything to it."
3026 msgstr ""
3027 "Tal y como se mencionó anteriormente, si se define este control de acceso "
3028 "como «true» hará que la base de datos sea de sólo lectura. Debconf leerá los "
3029 "valores de él, pero nunca escribirá nada."
3030
3031 #. type: TP
3032 #: debconf.conf.5:416
3033 #, no-wrap
3034 msgid "B<Accept-Name>"
3035 msgstr "B<Accept-Name>"
3036
3037 #. type: Plain text
3038 #: debconf.conf.5:422
3039 msgid ""
3040 "The text in this field is a perl-compatible regular expression that is "
3041 "matched against the names of items as they are requested from the database. "
3042 "Only if an items name matches the regular expression, will the database "
3043 "allow debconf to access or modify it."
3044 msgstr ""
3045 "El texto en este campo es una expresión regular compatible con Perl que se "
3046 "compara con los nombres de elementos de la base de datos a medida que se "
3047 "solicitan. La base de datos sólo permitirá a debconf que lo acceda o "
3048 "modifique si el nombre del elemento coincide con la expresión regular."
3049
3050 #. type: TP
3051 #: debconf.conf.5:422
3052 #, no-wrap
3053 msgid "B<Reject-Name>"
3054 msgstr "B<Reject-Name>"
3055
3056 #. type: Plain text
3057 #: debconf.conf.5:426
3058 msgid ""
3059 "Like Accept-Name, except any item name matching this regular expression will "
3060 "be rejected."
3061 msgstr ""
3062 "Igual que «Accept-Name», sólo que rechazará todo elemento cuyo nombre "
3063 "coincida con esta expresión regular."
3064
3065 #. type: TP
3066 #: debconf.conf.5:426
3067 #, no-wrap
3068 msgid "B<Accept-Type>"
3069 msgstr "B<Accept-Type>"
3070
3071 #. type: Plain text
3072 #: debconf.conf.5:431
3073 msgid ""
3074 "Another regular expression, this matches against the type of the item that "
3075 "is being accessed. Only if the type matches the regex will access be granted."
3076 msgstr ""
3077 "Otra expresión regular. Se compara con el tipo del elemento al que se está "
3078 "accediendo. Sólo se permite el acceso si el tipo coincide con la expresión "
3079 "regular."
3080
3081 #. type: TP
3082 #: debconf.conf.5:431
3083 #, no-wrap
3084 msgid "B<Reject-Type>"
3085 msgstr "B<Reject-Type>"
3086
3087 #. type: Plain text
3088 #: debconf.conf.5:435
3089 msgid ""
3090 "Like Accept-Type, except any type matching this regular expression will be "
3091 "rejected."
3092 msgstr ""
3093 "Igual que «Accept-Type», sólo que se rechazará todo tipo que coincida con "
3094 "esta expresión regular."
3095
3096 #. type: SH
3097 #: debconf.conf.5:435
3098 #, no-wrap
3099 msgid "FORMATS"
3100 msgstr "FORMATOS"
3101
3102 #. type: Plain text
3103 #: debconf.conf.5:439
3104 msgid ""
3105 "Some of the database drivers use format modules to control the actual format "
3106 "in which the database is stored on disk. These formats are currently "
3107 "supported:"
3108 msgstr ""
3109 "Algunos de los controladores de base de datos usan módulos de formato para "
3110 "controlar el formato real en el que la base de datos se guarda en el disco. "
3111 "Estos son los formatos aceptados actualmente:"
3112
3113 #. type: TP
3114 #: debconf.conf.5:439
3115 #, no-wrap
3116 msgid "B<822>"
3117 msgstr "B<822>"
3118
3119 #. type: Plain text
3120 #: debconf.conf.5:444
3121 msgid ""
3122 "This is a file format loosely based upon the rfc-822 format for email "
3123 "message headers. Similar formats are used throughout Debian; in the dpkg "
3124 "status file, and so on."
3125 msgstr ""
3126 "Este es un formato de fichero vagamente basado en el formato rfc-822 para "
3127 "cabeceras de mensajes de correo electrónico. Se usan formatos similares en "
3128 "Debian; en el fichero de estado de dpkg y más."
3129
3130 #. type: Plain text
3131 #: debconf.conf.5:446
3132 msgid "Here is a more complicated example of a debconf.conf file."
3133 msgstr "Este es un ejemplo más complicado de un fichero «debconf.conf»."
3134
3135 #. type: Plain text
3136 #: debconf.conf.5:452
3137 #, no-wrap
3138 msgid ""
3139 " # This stanza is used for general debconf setup.\n"
3140 " Config: stack\n"
3141 " Templates: templates\n"
3142 " Log: developer\n"
3143 " Debug: developer\n"
3144 msgstr ""
3145 " # Esta definición se usa para una configuración general\n"
3146 " # de debconf.\n"
3147 " Config: stack\n"
3148 " Templates: templates\n"
3149 " Log: developer\n"
3150 " Debug: developer\n"
3151
3152 #. type: Plain text
3153 #: debconf.conf.5:457
3154 #, no-wrap
3155 msgid ""
3156 " # This is my own local database.\n"
3157 " Name: mydb\n"
3158 " Driver: DirTree\n"
3159 " Directory: /var/cache/debconf/config\n"
3160 msgstr ""
3161 " # Esta es mi propia base de datos.\n"
3162 " Name: mi-base-de-datos\n"
3163 " Driver: DirTree\n"
3164 " Directory: /var/cache/debconf/config\n"
3165
3166 #. type: Plain text
3167 #: debconf.conf.5:469
3168 #, no-wrap
3169 msgid ""
3170 " # This is another database that I use to hold\n"
3171 " # only X server configuration.\n"
3172 " Name: X\n"
3173 " Driver: File\n"
3174 " Filename: /etc/X11/debconf.dat\n"
3175 " Mode: 644\n"
3176 " # It's sorta hard to work out what questions\n"
3177 " # belong to X; it should be using a deeper\n"
3178 " # tree structure so I could just match on ^X/\n"
3179 " # Oh well.\n"
3180 " Accept-Name: xserver|xfree86|xbase\n"
3181 msgstr ""
3182 " # Esta es otra base de datos que uso para contener\n"
3183 " # sólo la configuración del servidor X.\n"
3184 " Name: X\n"
3185 " Driver: File\n"
3186 " Filename: /etc/X11/debconf.dat\n"
3187 " Mode: 644\n"
3188 " # Es algo difícil descubrir qué preguntas pertenecen\n"
3189 " # a X; debería usar una estructura de árbol más\n"
3190 " # profunda para comparar sólo con ^X/\n"
3191 " # Pero bueno.\n"
3192 " Accept-Name: xserver|xfree86|xbase\n"
3193
3194 #. type: Plain text
3195 #: debconf.conf.5:485
3196 #, no-wrap
3197 msgid ""
3198 " # This is our company's global, read-only\n"
3199 " # (for me!) debconf database.\n"
3200 " Name: company\n"
3201 " Driver: LDAP\n"
3202 " Server: debconf.foo.com\n"
3203 " BaseDN: cn=debconf,dc=foo,dc=com\n"
3204 " BindDN: uid=admin,dc=foo,dc=com\n"
3205 " BindPasswd: secret\n"
3206 " Readonly: true\n"
3207 " # I don't want any passwords that might be\n"
3208 " # floating around in there.\n"
3209 " Reject-Type: password\n"
3210 " # If this db is not accessible for whatever\n"
3211 " # reason, carry on anyway.\n"
3212 " Required: false\n"
3213 msgstr ""
3214 " # Esta es la base de datos global de debconf de\n"
3215 " # sólo lectura (para mi) de nuestra compañía.\n"
3216 " Name: compañía\n"
3217 " Driver: LDAP\n"
3218 " Server: debconf.foo.com\n"
3219 " BaseDN: cn=debconf,dc=foo,dc=com\n"
3220 " BindDN: uid=admin,dc=foo,dc=com\n"
3221 " BindPasswd: secret\n"
3222 " Readonly: true\n"
3223 " # No deseo ninguna contraseña dando vueltas\n"
3224 " # por aquí.\n"
3225 " Reject-Type: password\n"
3226 " # Si no se puede acceder a esta base de datos,\n"
3227 " # continuar de todas formas.\n"
3228 " Required: false\n"
3229
3230 #. type: Plain text
3231 #: debconf.conf.5:493
3232 #, no-wrap
3233 msgid ""
3234 " # I use this database to hold\n"
3235 " # passwords safe and secure.\n"
3236 " Name: passwords\n"
3237 " Driver: File\n"
3238 " Filename: /etc/debconf/passwords\n"
3239 " Mode: 600\n"
3240 " Accept-Type: password\n"
3241 msgstr ""
3242 " # Uso esta base de datos para guardar\n"
3243 " # contraseñas de forma segura.\n"
3244 " Name: contraseñas\n"
3245 " Driver: File\n"
3246 " Filename: /etc/debconf/passwords\n"
3247 " Mode: 600\n"
3248 " Accept-Type: password\n"
3249
3250 #. type: Plain text
3251 #: debconf.conf.5:506
3252 #, no-wrap
3253 msgid ""
3254 " # Let's put them all together\n"
3255 " # in a database stack.\n"
3256 " Name: stack\n"
3257 " Driver: Stack\n"
3258 " Stack: passwords, X, mydb, company\n"
3259 " # So, all passwords go to the password database.\n"
3260 " # Most X configuration stuff goes to the X\n"
3261 " # database, and anything else goes to my main\n"
3262 " # database. Values are looked up in each of those\n"
3263 " # in turn, and if none has a particular value, it\n"
3264 " # is looked up in the company-wide LDAP database\n"
3265 " # (unless it's a password).\n"
3266 msgstr ""
3267 " # Vamos a guardarlas todas en una\n"
3268 " # pila de bases de datos.\n"
3269 " Name: stack\n"
3270 " Driver: Stack\n"
3271 " Stack: contraseñas, X, mi-base-de-datos, compañía\n"
3272 " # Por ello, todas las contraseñas van a la base de datos\n"
3273 " # de contraseñas. La mayoría de la configuración de\n"
3274 " # X está en la base de datos de X, y todo lo demás va a mi\n"
3275 " # base de datos principal. Los valores se buscan en cada\n"
3276 " # uno de estos, y si ninguno tiene un valor particular,\n"
3277 " # se comprueba en la base de datos LDAP de la compañía\n"
3278 " # (a menos que sea una contraseña).\n"
3279
3280 #. type: Plain text
3281 #: debconf.conf.5:514
3282 #, no-wrap
3283 msgid ""
3284 " # A database is also used to hold templates. We\n"
3285 " # don't need to make this as fancy.\n"
3286 " Name: templates\n"
3287 " Driver: File\n"
3288 " Mode: 644\n"
3289 " Format: 822\n"
3290 " Filename: /var/cache/debconf/templates\n"
3291 msgstr ""
3292 " # También se usa una base de datos para\n"
3293 " # guardar plantillas. Esto no tiene que ser muy complejo.\n"
3294 " Name: plantillas\n"
3295 " Driver: File\n"
3296 " Mode: 644\n"
3297 " Format: 822\n"
3298 " Filename: /var/cache/debconf/templates\n"
3299
3300 #. type: SH
3301 #: debconf.conf.5:514 confmodule.3:22
3302 #, no-wrap
3303 msgid "NOTES"
3304 msgstr "NOTAS"
3305
3306 #. type: Plain text
3307 #: debconf.conf.5:517
3308 msgid ""
3309 "If you use something like ${HOME} in this file, it will be replaced with the "
3310 "value of the named environment variable."
3311 msgstr ""
3312 "Si en este fichero usa algo parecido a «${HOME}», se reemplazará con el "
3313 "valor de la variable de entorno nombrada."
3314
3315 #. type: Plain text
3316 #: debconf.conf.5:521
3317 msgid ""
3318 "Environment variables can also be used to override the databases on the fly, "
3319 "see B<debconf>(7)"
3320 msgstr ""
3321 "También puede usar variables de entorno para anular en el momento algo en "
3322 "las bases de datos, consulte B<debconf>(7)"
3323
3324 #. type: Plain text
3325 #: debconf.conf.5:524
3326 msgid ""
3327 "The field names (the part of the line before the colon) is case-insensitive. "
3328 "The values, though, are case sensitive."
3329 msgstr ""
3330 "Los nombres de campo (la sección de la línea anterior a los dos puntos) no "
3331 "son sensibles a las mayúsculas y minúsculas. Sí lo son, sin embargo, los "
3332 "valores."
3333
3334 #. type: SH
3335 #: debconf.conf.5:524
3336 #, no-wrap
3337 msgid "PLANNED ENHANCEMENTS"
3338 msgstr "MEJORAS PREVISTAS"
3339
3340 #. type: Plain text
3341 #: debconf.conf.5:533
3342 msgid ""
3343 "More drivers and formats. Some ideas include: A SQL driver, with the "
3344 "capability to access a remote database. A DHCP driver, that makes available "
3345 "some special things like hostname, IP address, and DNS servers. A driver "
3346 "that pulls values out of public DNS records TXT fields. A format that is "
3347 "compatible with the output of cdebconf. An override driver, which can "
3348 "override the value field or flags of all requests that pass through it."
3349 msgstr ""
3350 "Más controladores y formatos. Algunas ideas incluyen: un controlador SQL, "
3351 "con la capacidad de acceder a una base de datos remota. Un controlador DHCP, "
3352 "que dé acceso a algunas cosas especiales como el nombre de sistema "
3353 "(«hostname»), la dirección IP y servidores DNS. Un controlador que obtenga "
3354 "valores de un registro público DNS con campos con formato TXT. Un formato "
3355 "compatible con la salida de cdebconf. Un controlador de anulación, que pueda "
3356 "anular el campo del valor u opciones de todas las peticiones que pasan a "
3357 "través de él."
3358
3359 #. type: SH
3360 #: debconf.conf.5:533
3361 #, no-wrap
3362 msgid "FILES"
3363 msgstr "FICHEROS"
3364
3365 #. type: Plain text
3366 #: debconf.conf.5:535
3367 msgid "/etc/debconf.conf"
3368 msgstr "/etc/debconf.conf"
3369
3370 #. type: Plain text
3371 #: debconf.conf.5:537
3372 msgid "~/.debconfrc"
3373 msgstr "~/.debconfrc"
3374
3375 #. type: Plain text
3376 #: debconf.conf.5:539
3377 msgid "B<debconf>(7)"
3378 msgstr "B<debconf>(7)"
3379
3380 #. type: Plain text
3381 #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969
3382 msgid "Joey Hess E<lt>[email protected]<gt>"
3383 msgstr "Joey Hess E<lt>[email protected]<gt>"
3384
3385 #. type: TH
3386 #: confmodule.3:1
3387 #, no-wrap
3388 msgid "CONFMODULE"
3389 msgstr "CONFMODULE"
3390
3391 #. type: Plain text
3392 #: confmodule.3:4
3393 msgid "confmodule - communicate with Debian configuration system FrontEnd."
3394 msgstr ""
3395 "confmodule - Interfaz para comunicarse con el sistema de configuración de "
3396 "Debian."
3397
3398 #. type: Plain text
3399 #: confmodule.3:12
3400 #, no-wrap
3401 msgid ""
3402 " #!/bin/sh -e\n"
3403 " . /usr/share/debconf/confmodule\n"
3404 " db_version 2.0\n"
3405 " db_capb 'backup'\n"
3406 " CAPB=$RET\n"
3407 " db_input 'foo/bar' || true\n"
3408 " db_go || true\n"
3409 msgstr ""
3410 " #!/bin/sh -e\n"
3411 " . /usr/share/debconf/confmodule\n"
3412 " db_version 2.0\n"
3413 " db_capb 'backup'\n"
3414 " CAPB=$RET\n"
3415 " db_input 'foo/bar' || true\n"
3416 " db_go || true\n"
3417
3418 #. type: Plain text
3419 #: confmodule.3:22
3420 msgid ""
3421 "This is a library of shell functions that eases communication with Debian's "
3422 "configuration management system. It can communicate with a FrontEnd via the "
3423 "debconf protocol. The design is that each command in the protocol is "
3424 "represented by one function in this module. The functionname is the same as "
3425 "the command, except it is prefixed with \"db_\" and is lower-case. Call the "
3426 "function and pass in any parameters you want to follow the command. Any "
3427 "textual return code from the FrontEnd will be returned to you in the $RET "
3428 "variable, while the numeric return code from the FrontEnd will be returned "
3429 "as a return code (and so those return codes must be captured or ignored)."
3430 msgstr ""
3431 "Esta es una biblioteca de funciones de intérprete de órdenes que facilita la "
3432 "comunicación con el sistema de gestión de configuración de Debian. Se puede "
3433 "comunicar con una interfaz («FrontEnd») mediante el protocolo de debconf. El "
3434 "diseño es tal que cada orden en el protocolo se representa en este módulo "
3435 "con una función. El nombre de la función es igual que el de la orden, con la "
3436 "diferencia de que tiene el prefijo «db_» y que está en minúscula. Invoque la "
3437 "función e introduzca a continuación de la orden cualquier parámetro que "
3438 "desee. Todo el código textual de retorno de la interfaz le llegará en la "
3439 "variable «$RET», mientras que el código numérico de retorno de la interfaz "
3440 "se devolverá como código de retorno, posibilitando capturar o ignorar estos "
3441 "códigos de retorno."
3442
3443 #. type: Plain text
3444 #: confmodule.3:29
3445 #, no-wrap
3446 msgid ""
3447 "Once this library is loaded, any text you later output will go to standard\n"
3448 "error, rather than standard output. This is a good thing in general, because\n"
3449 "text sent to standard output is interpreted by the FrontEnd as commands. If\n"
3450 "you do want to send a command directly to the FrontEnd, you must output it\n"
3451 "to file descriptor 3, like this:\n"
3452 " echo GET foo/bar E<gt>&3\n"
3453 msgstr ""
3454 "Una vez que se haya cargado esta biblioteca, todo texto enviado por la\n"
3455 "salida irá a la salida de error estándar, en lugar de la salida estándar.\n"
3456 "En general, es bueno, ya que el texto enviado por la salida estándar será\n"
3457 "interpretado por la interfaz como una orden. Si desea enviar una orden\n"
3458 "directamente a la interfaz, deberá enviarlo como salida al descriptor de\n"
3459 "fichero 3, tal y como se muestra: echo GET foo/bar E<gt>&3\n"
3460
3461 #. type: Plain text
3462 #: confmodule.3:36
3463 msgid ""
3464 "The library checks to make sure it is actually speaking to a FrontEnd by "
3465 "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is "
3466 "assumed to be running. If not, the library turns into one, and runs a copy "
3467 "of the script that loaded the library connected to it. This means that if "
3468 "you source this library, you should do so very near to the top of your "
3469 "script, because everything before the sourcing of the library may well be "
3470 "run again."
3471 msgstr ""
3472 "La biblioteca comprueba que realmente se está comunicando con una interfaz "
3473 "examinando la variable «DEBIAN_HAS_FRONTEND». Si está definida, la interfaz "
3474 "supondrá que está en ejecución. En caso contrario, la biblioteca se "
3475 "convierte en una, y ejecuta una copia del script que ha cargado la "
3476 "biblioteca conectada a él. Esto es, si carga la biblioteca, tendría que "
3477 "hacerlo al principio del script ya que puede que se ejecute otra vez todo lo "
3478 "que aparezca antes de cargar la biblioteca."
3479
3480 #. type: Plain text
3481 #: confmodule.3:42
3482 msgid ""
3483 "B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
3484 "debconf_specification in the debian-policy package"
3485 msgstr ""
3486 "B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-reconfigure>(8), "
3487 "«debconf_specification» en el paquete debian-policy"
3488
3489 #. type: TH
3490 #: debconf.7:1
3491 #, no-wrap
3492 msgid "DEBCONF"
3493 msgstr "DEBCONF"
3494
3495 #. type: Plain text
3496 #: debconf.7:4
3497 msgid "debconf - Debian package configuration system"
3498 msgstr "debconf - Sistema de configuración de paquetes de Debian"
3499
3500 #. type: Plain text
3501 #: debconf.7:8
3502 msgid ""
3503 "Debconf is a configuration system for Debian packages. There is a rarely-"
3504 "used command named debconf, documented in B<debconf>(1)"
3505 msgstr ""
3506 "Debconf es un sistema de configuración para paquetes de Debian. Existe una "
3507 "orden raramente usada llamada debconf, documentada en B<debconf>(1)"
3508
3509 #. type: Plain text
3510 #: debconf.7:16
3511 msgid ""
3512 "Debconf provides a consistent interface for configuring packages, allowing "
3513 "you to choose from several user interface frontends. It supports "
3514 "preconfiguring packages before they are installed, which allows large "
3515 "installs and upgrades to ask you for all the necessary information up front, "
3516 "and then go do the work while you do something else. It lets you, if you're "
3517 "in a hurry, skip over less important questions and information while "
3518 "installing a package (and revisit it later)."
3519 msgstr ""
3520 "Debconf ofrece una interfaz uniforme para la configuración de paquetes, que "
3521 "permite escoger entre varias interfaces de usuario. Es capaz de "
3522 "preconfigurar paquetes antes de la instalación, lo cual permite que grandes "
3523 "instalaciones y actualizaciones soliciten toda la información necesaria para "
3524 "su puesta a punto, para después proseguir la instalación mientras usted hace "
3525 "algo distinto. Le permite, si tiene prisa, omitir las preguntas e "
3526 "información de menor importancia al instalar un paquete, y verlas más tarde."
3527
3528 #. type: SH
3529 #: debconf.7:16
3530 #, no-wrap
3531 msgid "Preconfiguring packages"
3532 msgstr "Preconfigurar paquetes"
3533
3534 #. type: Plain text
3535 #: debconf.7:22
3536 msgid ""
3537 "Debconf can configure packages before they are even installed onto your "
3538 "system. This is useful because it lets all the questions the packages are "
3539 "going to ask be asked at the beginning of an install, so the rest of the "
3540 "install can proceed while you are away getting a cup of coffee."
3541 msgstr ""
3542 "Debconf puede configurar paquetes incluso antes de su instalación en su "
3543 "sistema. Es útil ya que permite que los paquetes realicen todas las "
3544 "preguntas al inicio de la instalación, de forma que la instalación pueda "
3545 "proceder mientras se toma una taza de café."
3546
3547 #. type: Plain text
3548 #: debconf.7:27
3549 msgid ""
3550 "If you use apt (version 0.5 or above), and you have apt-utils installed, "
3551 "each package apt installs will be automatically preconfigured. This is "
3552 "controlled via I</etc/apt/apt.conf.d/70debconf>"
3553 msgstr ""
3554 "Si usa apt (la versión 0.5 o posterior) y apt-utils está instalado, cada "
3555 "paquete que apt instale se preconfigurará automáticamente. Esto se controla "
3556 "mediante I</etc/apt/apt.conf.d/70debconf>."
3557
3558 #. type: Plain text
3559 #: debconf.7:33
3560 msgid ""
3561 "Sometimes you might want to preconfigure a package by hand, when you're not "
3562 "installing it with apt. You can use B<dpkg-preconfigure>(8) to do that, "
3563 "just pass it the filenames of the packages you want to preconfigure. You "
3564 "will need apt-utils installed for that to work."
3565 msgstr ""
3566 "A veces puede que desee preconfigurar un paquete directamente cuando no lo "
3567 "instala con apt. Para ello, puede usar B<dpkg-preconfigure>(8); simplemente "
3568 "introduzca los nombres de fichero de los paquetes que desea preconfigurar. "
3569 "Necesitará que apt-utils esté instalado para que funcione."
3570
3571 #. type: SH
3572 #: debconf.7:33
3573 #, no-wrap
3574 msgid "Reconfiguring packages"
3575 msgstr "Reconfigurar paquetes"
3576
3577 #. type: Plain text
3578 #: debconf.7:40
3579 msgid ""
3580 "Suppose you installed the package, and answered debconf's questions, but now "
3581 "that you've used it awhile, you realize you want to go back and change some "
3582 "of your answers. In the past, reinstalling a package was often the thing to "
3583 "do when you got in this situation, but when you reinstall the package, "
3584 "debconf seems to remember you have answered the questions, and doesn't ask "
3585 "them again (this is a feature)."
3586 msgstr ""
3587 "Suponga que ha instalado el paquete y que ha contestado a las preguntas de "
3588 "debconf, pero ya lleva un tiempo usándolo y se da cuenta de que desea volver "
3589 "atrás y cambiar alguna de sus respuestas. En el pasado, esta situación se "
3590 "solucionaba habitualmente instalando el paquete otra vez, pero cuando "
3591 "reinstala un paquete parece que debconf recuerda cómo contestó a las "
3592 "preguntas, y no las plantea otra vez (esto es una funcionalidad)."
3593
3594 #. type: Plain text
3595 #: debconf.7:44
3596 #, no-wrap
3597 msgid ""
3598 "Luckily, debconf makes it easy to reconfigure any package that uses it.\n"
3599 "Suppose you want to reconfigure debconf itself. Just run, as root:\n"
3600 " dpkg-reconfigure debconf\n"
3601 msgstr ""
3602 "Afortunadamente, debconf facilita reconfigurar cualquier paquete\n"
3603 "que hace uso de él.\n"
3604 "Suponga que desea reconfigurar precisamente debconf. Sencillamente,\n"
3605 "ejecute lo siguiente como administrador:\n"
3606 " dpkg-reconfigure debconf\n"
3607
3608 #. type: Plain text
3609 #: debconf.7:49
3610 msgid ""
3611 "This will ask all the questions you saw when debconf was first installed. "
3612 "It may ask you other questions as well, since it asks even low priority "
3613 "questions that may have been skipped when the package was installed. You "
3614 "can use it on any other package that uses debconf, as well."
3615 msgstr ""
3616 "Esto planteará todas las preguntas que vio la primera vez que instaló "
3617 "debconf. Puede que también le haga otras preguntas, ya que pregunta incluso "
3618 "las cuestiones con baja prioridad que se pueden haber omitido al instalar el "
3619 "paquete. Puede usar esta orden con cualquier otro paquete que también usa "
3620 "debconf."
3621
3622 #. type: SH
3623 #: debconf.7:49
3624 #, no-wrap
3625 msgid "Frontends"
3626 msgstr "Interfaces"
3627
3628 #. type: Plain text
3629 #: debconf.7:53
3630 msgid ""
3631 "One of debconf's unique features is that the interface it presents to you is "
3632 "only one of many, that can be swapped in at will. There are many debconf "
3633 "frontends available:"
3634 msgstr ""
3635 "Una de las características únicas de debconf es que la interfaz que le "
3636 "presenta es sólo una de entre varias posibles, que puede intercambiar como "
3637 "desee. Puede interactuar con debconf a través de varias interfaces:"
3638
3639 #. type: TP
3640 #: debconf.7:53
3641 #, no-wrap
3642 msgid "B<dialog>"
3643 msgstr "B<dialog>"
3644
3645 #. type: Plain text
3646 #: debconf.7:60
3647 msgid ""
3648 "The default frontend, this uses the B<whiptail>(1) or B<dialog>(1) "
3649 "programs to display questions to you. It works in text mode."
3650 msgstr ""
3651 "La interfaz predefinida, que usa los programas B<whiptail>(1) o B<dialog>(1) "
3652 "para mostrar las preguntas. Funciona en modo de texto."
3653
3654 #. type: TP
3655 #: debconf.7:60
3656 #, no-wrap
3657 msgid "B<readline>"
3658 msgstr "B<readline>"
3659
3660 #. type: Plain text
3661 #: debconf.7:72
3662 msgid ""
3663 "The most traditional frontend, this looks quite similar to how Debian "
3664 "configuration always has been: a series of questions, printed out at the "
3665 "console using plain text, and prompts done using the readline library. It "
3666 "even supports tab completion. The libterm-readline-gnu-perl package is "
3667 "strongly recommended if you chose to use this frontend; the default readline "
3668 "module does not support prompting with default values. At the minimum, "
3669 "you'll need the perl-modules package installed to use this frontend."
3670 msgstr ""
3671 "La interfaz más tradicional, que se parece a como siempre ha sido la "
3672 "configuración de Debian: una serie de preguntas mostradas por el intérprete "
3673 "de órdenes usando texto simple, y que realiza preguntas a través de la "
3674 "biblioteca readline. También acepta el completado automático con el "
3675 "tabulador. Recomendamos encarecidamente el paquete libterm-readline-gnu-perl "
3676 "si escoge usar esta interfaz; el módulo predefinido de readline no permite "
3677 "realizar preguntas con valores predefinidos especiales. Como mínimo, "
3678 "necesitará instalar el paquete perl-modules para usar esta interfaz."
3679
3680 #. type: Plain text
3681 #: debconf.7:77
3682 msgid ""
3683 "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to "
3684 "the previous question (if that is supported by the package that is using "
3685 "debconf), and pagedown (or ctrl-v) will skip forward to the next question."
3686 msgstr ""
3687 "Esta interfaz posee algunas teclas rápidas especiales. La tecla repág (o "
3688 "«Ctrl-u») volverá a la última pregunta (si es compatible con el paquete que "
3689 "usa debconf), y la tecla avpág (o «Ctrl-v») pasará a la siguiente pregunta."
3690
3691 #. type: Plain text
3692 #: debconf.7:80
3693 msgid ""
3694 "This is the best frontend for remote admin work over a slow connection, or "
3695 "for those who are comfortable with unix."
3696 msgstr ""
3697 "Esta es la mejor interfaz para tareas de administración remota a través de "
3698 "una conexión lenta, o para que aquellos que están cómodos con Unix."
3699
3700 #. type: TP
3701 #: debconf.7:81
3702 #, no-wrap
3703 msgid "B<noninteractive>"
3704 msgstr "B<noninteractive>"
3705
3706 #. type: Plain text
3707 #: debconf.7:90
3708 msgid ""
3709 "This is the anti-frontend. It never interacts with you at all, and makes the "
3710 "default answers be used for all questions. It might mail error messages to "
3711 "root, but that's it; otherwise it is completely silent and unobtrusive, a "
3712 "perfect frontend for automatic installs. If you are using this front-end, "
3713 "and require non-default answers to questions, you will need to preseed the "
3714 "debconf database; see the section below on Unattended Package Installation "
3715 "for more details."
3716 msgstr ""
3717 "Esta es la anti interfaz. Nunca interactúa con usted y acepta las respuestas "
3718 "predefinidas para todas las preguntas. Puede que envíe correos de error al "
3719 "administrador, pero eso es todo; por otra parte, es totalmente silenciosa y "
3720 "discreta, la interfaz perfecta para instalaciones automáticas. Si está "
3721 "usando esta interfaz y necesita respuestas no predefinidas para preguntas, "
3722 "tendrá que configurar previamente («preseed») la base de datos de debconf; "
3723 "para más información consulte la sección más abajo «Instalación desatendida "
3724 "de paquetes»."
3725
3726 #. type: TP
3727 #: debconf.7:90
3728 #, no-wrap
3729 msgid "B<gnome>"
3730 msgstr "B<gnome>"
3731
3732 #. type: Plain text
3733 #: debconf.7:96
3734 #, fuzzy
3735 #| msgid ""
3736 #| "This is a modern X GUI using the gtk and gnome libraries. Of course, it "
3737 #| "requires a valid DISPLAY to work; debconf will fall back to other "
3738 #| "frontends if it can't work. Note that this frontend requires you have the "
3739 #| "libgnome2-perl package installed."
3740 msgid ""
3741 "This is a modern X GUI using the gtk and gnome libraries. Of course, it "
3742 "requires a valid DISPLAY to work; debconf will fall back to other frontends "
3743 "if it can't work. Note that this frontend requires you have the libgtk3-perl "
3744 "package installed."
3745 msgstr ""
3746 "Esta es una moderna interfaz gráfica para X que usa Gtk y las bibliotecas de "
3747 "GNOME. Por supuesto, requiere una variable de entorno «DISPLAY» válida para "
3748 "su funcionamiento; debconf usará otras interfaces de forma predefinida si no "
3749 "funciona. Tenga en cuenta que necesita tener instalado el paquete libgnome2-"
3750 "perl."
3751
3752 #. type: TP
3753 #: debconf.7:96
3754 #, no-wrap
3755 msgid "B<kde>"
3756 msgstr "B<kde>"
3757
3758 #. type: Plain text
3759 #: debconf.7:102
3760 #, fuzzy
3761 #| msgid ""
3762 #| "This frontend provides a simple X GUI written with the Qt library. It "
3763 #| "fits well the KDE desktop. You of course need a DISPLAY to use this "
3764 #| "frontend and must install libqt-perl. The frontend will fall back to "
3765 #| "dialog if some of the prerequisites are not met."
3766 msgid ""
3767 "This frontend provides a modern X GUI based on the KDE Platform. You of "
3768 "course need a DISPLAY to use this frontend and you must install debconf-kde-"
3769 "helper package. The frontend will fall back to dialog if some of the "
3770 "prerequisites are not met."
3771 msgstr ""
3772 "Esta interfaz proporciona una sencilla interfaz de usuario para X creada "
3773 "utilizando la biblioteca QT. Se integra bien en el entorno de escritorio "
3774 "KDE. Por supuesto, necesita configurar «DISPLAY» para utilizar esta "
3775 "interfaz, e instalar libqt-perl. Si no se cumplen todos los requisitos, esta "
3776 "interfaz utilizará dialog de forma predefinida."
3777
3778 #. type: TP
3779 #: debconf.7:102
3780 #, no-wrap
3781 msgid "B<editor>"
3782 msgstr "B<editor>"
3783
3784 #. type: Plain text
3785 #: debconf.7:110
3786 msgid ""
3787 "This is for those fanatics who have to do everything in a text editor. It "
3788 "runs your editor on a file that looks something like a typical unix config "
3789 "file, and you edit the file to communicate with debconf. Debconf's author "
3790 "prefers to not comment regarding the circumstances that led to this frontend "
3791 "being written."
3792 msgstr ""
3793 "Esto es para aquellos fanáticos que tienen que hacer todo lo posible con un "
3794 "editor de texto. Ejecuta su editor en un fichero similar a un fichero de "
3795 "configuración típico de Unix, y puede editar el fichero para comunicarse con "
3796 "debconf. Los autores de debconf prefieren no hacer comentarios sobre las "
3797 "circunstancias que llevaron a escribir esta interfaz."
3798
3799 #. type: TP
3800 #: debconf.7:110
3801 #, no-wrap
3802 msgid "B<web>"
3803 msgstr "B<web>"
3804
3805 #. type: Plain text
3806 #: debconf.7:120
3807 msgid ""
3808 "This frontend acts as a web server, that you connect to with your web "
3809 "browser, to browse the questions and answer them. It has a lot of promise, "
3810 "but is a little rough so far. When this frontend starts up, it will print "
3811 "out the location you should point your web browser to. You have to run the "
3812 "web browser on the same machine you are configuring, for security reasons."
3813 msgstr ""
3814 "Esta interfaz actúa como un servidor web al que se conecta con su navegador "
3815 "de internet para explorar y responder a las preguntas. Es muy prometedor "
3816 "aunque por ahora un tanto inacabado. Al iniciarse, mostrará la ubicación a "
3817 "la que debería apuntar su navegador web. Por razones de seguridad, tendrá "
3818 "que ejecutar el navegador en la misma máquina que está configurando."
3819
3820 #. type: Plain text
3821 #: debconf.7:126
3822 msgid ""
3823 "Do keep in mind that this is not a very secure frontend. Anyone who has "
3824 "access to the computer being configured can currently access the web server "
3825 "and configure things while this frontend is running. So this is more of a "
3826 "proof of concept than anything."
3827 msgstr ""
3828 "Tenga en cuenta que no es una interfaz muy segura. Cualquier persona con "
3829 "acceso al sistema que se está configurando puede acceder al servidor web y "
3830 "configurar cosas mientras se esté ejecutando esta interfaz. Esto es más una "
3831 "idea puesta en práctica que una funcionalidad acabada."
3832
3833 #. type: Plain text
3834 #: debconf.7:133
3835 #, no-wrap
3836 msgid ""
3837 "You can change the default frontend debconf uses by reconfiguring\n"
3838 "debconf. On the other hand, if you just want to change the frontend\n"
3839 "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n"
3840 "the name of the frontend to use. For example:\n"
3841 " DEBIAN_FRONTEND=readline apt-get install slrn\n"
3842 msgstr ""
3843 "Puede cambiar la interfaz que usa debconf reconfigurando debconf.\n"
3844 "Por otra parte, si desea cambiar la interfaz sólo por un momento\n"
3845 "puede definir la variable de entorno «DEBIAN_FRONTEND» con el\n"
3846 "nombre de la interfaz a usar. Por ejemplo:\n"
3847 " DEBIAN_FRONTEND=readline apt-get install slrn\n"
3848
3849 #. type: Plain text
3850 #: debconf.7:141
3851 msgid ""
3852 "The B<dpkg-reconfigure>(8) and B<dpkg-preconfigure>(8) commands also let "
3853 "you pass I<--frontend=> to them, followed by the frontend you want them to "
3854 "use."
3855 msgstr ""
3856 "Las órdenes B<dpkg-reconfigure>(8) y B<dpkg-preconfigure>(8) aceptan la "
3857 "opción I<--frontend=>, seguida de la interfaz que desea que usen."
3858
3859 #. type: Plain text
3860 #: debconf.7:145
3861 msgid ""
3862 "Note that not all frontends will work in all circumstances. If a frontend "
3863 "fails to start up for some reason, debconf will print out a message "
3864 "explaining why, and fall back to the next-most similar frontend."
3865 msgstr ""
3866 "Tenga en cuenta que no todas las interfaces funcionan en todas las "
3867 "situaciones. Si una interfaz falla al iniciarse por cualquier razón, debconf "
3868 "mostrará un mensaje que explica la razón y usará la siguiente interfaz más "
3869 "parecida."
3870
3871 #. type: SH
3872 #: debconf.7:145
3873 #, no-wrap
3874 msgid "Priorities"
3875 msgstr "Prioridades"
3876
3877 #. type: Plain text
3878 #: debconf.7:152
3879 msgid ""
3880 "Another nice feature of debconf is that the questions it asks you are "
3881 "prioritized. If you don't want to be bothered about every little thing, you "
3882 "can set up debconf to only ask you the most important questions. On the "
3883 "other hand, if you are a control freak, you can make it show you all "
3884 "questions. Each question has a priority. In increasing order of importance:"
3885 msgstr ""
3886 "Otra característica interesante de debconf es que prioriza las preguntas que "
3887 "se le hacen. Si no desea ser molestado por cada pequeña cuestión puede "
3888 "configurar debconf para que sólo plantee las preguntas más importantes. Por "
3889 "otra parte, si es un obseso del control puede hacer que muestre todas las "
3890 "preguntas. Cada pregunta tiene una prioridad. En orden creciente de "
3891 "importancia:"
3892
3893 #. type: TP
3894 #: debconf.7:152 debconf-devel.7:294
3895 #, no-wrap
3896 msgid "B<low>"
3897 msgstr "B<low>"
3898
3899 #. type: Plain text
3900 #: debconf.7:156
3901 msgid ""
3902 "Very trivial questions that have defaults that will work in the vast "
3903 "majority of cases."
3904 msgstr ""
3905 "Preguntas muy triviales con valores predefinidos que funcionarán en la gran "
3906 "mayoría de los casos."
3907
3908 #. type: TP
3909 #: debconf.7:156 debconf-devel.7:298
3910 #, no-wrap
3911 msgid "B<medium>"
3912 msgstr "B<medium>"
3913
3914 #. type: Plain text
3915 #: debconf.7:159
3916 msgid "Normal questions that have reasonable defaults."
3917 msgstr "Preguntas normales con unos valores predefinidos razonables."
3918
3919 #. type: TP
3920 #: debconf.7:159 debconf-devel.7:301
3921 #, no-wrap
3922 msgid "B<high>"
3923 msgstr "B<high>"
3924
3925 #. type: Plain text
3926 #: debconf.7:162
3927 msgid "Questions that don't have a reasonable default."
3928 msgstr "Preguntas que no tienen un valor predefinido razonable."
3929
3930 #. type: TP
3931 #: debconf.7:162 debconf-devel.7:304
3932 #, no-wrap
3933 msgid "B<critical>"
3934 msgstr "B<critical>"
3935
3936 #. type: Plain text
3937 #: debconf.7:165
3938 msgid "Questions that you really, really need to see (or else)."
3939 msgstr "Las preguntas que realmente, de verdad, necesita ver."
3940
3941 #. type: Plain text
3942 #: debconf.7:175
3943 msgid ""
3944 "Only questions with a priority equal to or greater than the priority you "
3945 "choose will be shown to you. You can set the priority value by reconfiguring "
3946 "debconf, or temporarily by passing I<--priority=> followed by the value to "
3947 "the B<dpkg-reconfigure>(8) and B<dpkg-preconfigure>(8) commands, or by "
3948 "setting the DEBIAN_PRIORITY environment variable."
3949 msgstr ""
3950 "Sólo se le mostrarán las preguntas con una prioridad igual o superior a la "
3951 "prioridad que seleccione. Puede definir el valor de la prioridad "
3952 "reconfigurando debconf, introduciendo temporalmente I<--priority=> seguido "
3953 "del valor a las órdenes B<dpkg-reconfigure>(8) y B<dpkg-preconfigure>(8), o "
3954 "definiendo la variable de entorno «DEBIAN_PRIORITY»."
3955
3956 #. type: SH
3957 #: debconf.7:175
3958 #, no-wrap
3959 msgid "Backend Database"
3960 msgstr "Sistema de la base de datos"
3961
3962 #. type: Plain text
3963 #: debconf.7:187
3964 msgid ""
3965 "Debconf uses a rather flexible and potentially complicated backend database "
3966 "for storing data such as the answers to questions. The file B</etc/debconf."
3967 "conf> is used to configure this database. If you need to set up something "
3968 "complicated, like make debconf read a remote database to get defaults, with "
3969 "local overrides, read the B<debconf.conf>(5) man page for all the gory "
3970 "details. Generally, the backend database is located in B</var/cache/debconf/"
3971 "> ."
3972 msgstr ""
3973 "Debconf usa un sistema de base de datos muy flexible y potencialmente "
3974 "complicado para almacenar datos tales como las respuestas a las preguntas. "
3975 "El fichero B</etc/debconf.conf> sirve para configurar esta base de datos. Si "
3976 "necesita configurar algo complicado, como hacer que debconf lea una base de "
3977 "datos remota para obtener los valores predefinidos, introduciendo cambios "
3978 "locales, lea la página de manual B<debconf.conf>(5) para todos los detalles "
3979 "específicos. Habitualmente, el sistema de la base de datos se encuentra en "
3980 "B</var/cache/debconf/>."
3981
3982 #. type: SH
3983 #: debconf.7:187
3984 #, no-wrap
3985 msgid "Unattended Package Installation"
3986 msgstr "Instalación desatendida de paquetes"
3987
3988 #. type: Plain text
3989 #: debconf.7:194
3990 msgid ""
3991 "If you have many machines to manage you will sometimes find yourself in the "
3992 "position of needing to perform an unattended installation or upgrade of "
3993 "packages on many systems, when the default answers to some configuration "
3994 "questions are not acceptable. There are many ways to approach this; all "
3995 "involve setting up a database and making debconf use it to get the answers "
3996 "you want."
3997 msgstr ""
3998 "Si gestiona varios sistemas, a veces tendrá la necesidad de realizar una "
3999 "instalación o actualización desatendida de paquetes en varios sistemas, "
4000 "incluyendo cuando las respuestas predefinidas a algunas preguntas de "
4001 "configuración no sean aceptables. Existen varias formas de abordar esto; "
4002 "todas implican la creación de una base de datos y hacer que debconf use las "
4003 "respuestas que desea."
4004
4005 #. type: Plain text
4006 #: debconf.7:198
4007 msgid ""
4008 "You should really read B<debconf.conf>(5) before this section, as you need "
4009 "to understand how debconf's databases work."
4010 msgstr ""
4011 "Recomendamos que lea B<debconf.conf>(5) antes de leer esta sección, ya que "
4012 "tiene que entender el funcionamiento de las bases de datos de debconf."
4013
4014 #. type: Plain text
4015 #: debconf.7:205
4016 msgid ""
4017 "The easiest way to set up the database is to install the packages on one "
4018 "machine and answer their questions as usual. Or you might just use B<dpkg-"
4019 "preconfigure>(8) to configure a set of packages without actually installing "
4020 "them. Or you might even decide to write a plain text debconf database by "
4021 "hand or something."
4022 msgstr ""
4023 "La forma más sencilla de configurar la base de datos es instalar los "
4024 "paquetes en un sistema y responder a las preguntas de la forma habitual, o "
4025 "puede usar B<dpkg-preconfigure>(8) para configurar un conjunto de paquetes "
4026 "sin instalarlos realmente. También puede decidir escribir una base de datos "
4027 "de debconf a mano o algo así."
4028
4029 #. type: Plain text
4030 #: debconf.7:209
4031 msgid ""
4032 "Once you have the database, you need to figure out how to make the remote "
4033 "systems use it. This depends of course on the configuration of those systems "
4034 "and what database types they are set up to use."
4035 msgstr ""
4036 "Una vez que tiene la base de datos, tendrá que averiguar cómo hacer que los "
4037 "sistemas remotos lo usen. Por supuesto, esto depende de la configuración de "
4038 "esos sistemas y de los tipos de base de datos para los que están "
4039 "configurados."
4040
4041 #. type: Plain text
4042 #: debconf.7:213
4043 msgid ""
4044 "If you are using the LDAP debconf database, an entire network of debian "
4045 "machines can also have any or all package installation questions answered "
4046 "automatically by a single LDAP server."
4047 msgstr ""
4048 "Si está usando la base de datos LDAP de debconf, puede responder a las "
4049 "preguntas de instalación de paquetes para toda una red de sistemas Debian "
4050 "con un sólo servidor LDAP."
4051
4052 #. type: Plain text
4053 #: debconf.7:222
4054 msgid ""
4055 "But perhaps you're using something a little bit easier to set up like, say, "
4056 "the default debconf database configuration, or you just don't want your "
4057 "remote systems to use LDAP all the time. In this case the best approach is "
4058 "to temporarily configure the remote systems to stack your database "
4059 "underneath their own existing databases, so they pull default values out of "
4060 "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and "
4061 "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample "
4062 "use:"
4063 msgstr ""
4064 "Pero puede que esté usando algo más sencillo de configurar que, por ejemplo, "
4065 "la configuración predefinida de la base de datos debconf, o sencillamente no "
4066 "desea que sus sistemas remotos usen LDAP todo el tiempo. En este caso, el "
4067 "mejor enfoque es configurar temporalmente los sistemas remotos para que "
4068 "apilen («stack») su base de datos debajo de sus bases de datos existentes de "
4069 "forma que obtengan de éste los valores predefinidos. Debconf ofrece dos "
4070 "variables de entorno, «DEBCONF_DB_FALLBACK» y «DEBCONF_DB_OVERRIDE» para "
4071 "facilitar realizar esto en el momento. Éste es un ejemplo de uso:"
4072
4073 #. type: Plain text
4074 #: debconf.7:226
4075 #, no-wrap
4076 msgid ""
4077 " cat /var/cache/debconf/config.dat | \\e\n"
4078 " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n"
4079 " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n"
4080 msgstr ""
4081 " cat /var/cache/debconf/config.dat | \\e\n"
4082 " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n"
4083 " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n"
4084
4085 #. type: Plain text
4086 #: debconf.7:232
4087 msgid ""
4088 "This makes the debconf on the remote host read in the data that is piped "
4089 "across the ssh connection and interpret it as a plain text format debconf "
4090 "database. It then uses that database as a fallback database -- a read-only "
4091 "database that is queried for answers to questions if the system's main "
4092 "debconf database lacks answers."
4093 msgstr ""
4094 "Esto hace que el sistema debconf en el sistema remoto lea los datos "
4095 "introducidos a través de la conexión ssh, interpretándolo como un formato de "
4096 "texto simple de base de datos de debconf. A continuación, usa esa base de "
4097 "datos como una base de datos alternativa; una base de datos de sólo lectura "
4098 "que se consulta para obtener las respuestas a preguntas en el caso de que la "
4099 "base de datos de debconf principal del sistema no tenga respuestas."
4100
4101 #. type: Plain text
4102 #: debconf.7:234
4103 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:"
4104 msgstr ""
4105 "Aquí tiene otra forma de usar la variable de entorno «DEBCONF_DB_FALLBACK»:"
4106
4107 #. type: Plain text
4108 #: debconf.7:237
4109 #, no-wrap
4110 msgid ""
4111 " ssh -R 389:ldap:389 root@target \\e\n"
4112 " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n"
4113 msgstr ""
4114 " ssh -R 389:ldap:389 root@target \\e\n"
4115 " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n"
4116
4117 #. type: Plain text
4118 #: debconf.7:242
4119 msgid ""
4120 "Here ssh is used to set up a tunneled LDAP connection and run debconf. "
4121 "Debconf is told to use the LDAP server as the fallback database. Note the "
4122 "use of \"{host:localhost}\" to configure how debconf accesses the LDAP "
4123 "database by providing the \"host\" field with a value of \"localhost\"."
4124 msgstr ""
4125 "En este caso, se usa una conexión ssh para configurar una conexión LDAP y "
4126 "para ejecutar debconf. Se dice a Debconf que use el servidor LDAP como la "
4127 "base de datos alternativa. Observe el uso de «{host:localhost}» para "
4128 "configurar la forma en que debconf accede a la base de datos LDAP "
4129 "proporcionando el campo «host» con un valor de «localhost»."
4130
4131 #. type: Plain text
4132 #: debconf.7:244
4133 msgid "Here's another method:"
4134 msgstr "Éste es otro método:"
4135
4136 #. type: Plain text
4137 #: debconf.7:247
4138 #, no-wrap
4139 msgid ""
4140 " scp config.dat root@target:\n"
4141 " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n"
4142 msgstr ""
4143 " scp config.dat root@target:\n"
4144 " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n"
4145
4146 #. type: Plain text
4147 #: debconf.7:252
4148 msgid ""
4149 "Here you copy the database over with scp, and then ssh over and make debconf "
4150 "use the file you copied over. This illustrates a shorthand you can use in "
4151 "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it "
4152 "defaults to \"filename\"."
4153 msgstr ""
4154 "En este caso, se copia la base de datos a través de scp, y después a través "
4155 "de ssh, haciendo que debconf use el fichero copiado. Esto ilustra una forma "
4156 "abreviada que puede usar como parámetro de «DEBCONF_DB_FALLBACK». Si no se "
4157 "rellena un nombre de campo, el valor predefinido es «filename»."
4158
4159 #. type: Plain text
4160 #: debconf.7:261
4161 msgid ""
4162 "There is only one problem with these uses of the DEBCONF_DB_FALLBACK "
4163 "parameter: While the fallback database can provide answers to questions the "
4164 "other debconf databases have never seen, it is only queried as a fallback; "
4165 "after the other databases. If you need to instead temporarily override an "
4166 "existing value on the remote host, you should instead use the "
4167 "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a "
4168 "temporary database, but this database is consulted before any others, and "
4169 "can be used to override existing values."
4170 msgstr ""
4171 "Sólo existe un problema al usar el parámetro «DEBCONF_DB_FALLBACK» de esta "
4172 "forma: mientras que la base de datos alternativa puede proporcionar las "
4173 "respuestas a preguntas que las otras bases de datos de debconf nunca han "
4174 "visto, sólo se consulta después de consultar las otras bases de datos. Si "
4175 "desea anular de forma temporal un valor existente en el sistema remoto "
4176 "debería usar la variable «DEBCONF_DB_OVERRIDE». Al igual que "
4177 "«DEBCONF_DB_FALLBACK», configura una base de datos temporal, pero esta base "
4178 "de datos se consulta antes que las demás y se puede usar para anular valores "
4179 "existentes."
4180
4181 #. type: SH
4182 #: debconf.7:261
4183 #, no-wrap
4184 msgid "Developing for Debconf"
4185 msgstr "Desarrollar con Debconf"
4186
4187 #. type: Plain text
4188 #: debconf.7:266
4189 msgid ""
4190 "Package developers and others who want to develop packages that use debconf "
4191 "should read B<debconf-devel>(7) ."
4192 msgstr ""
4193 "Los desarrolladores de paquetes y otros que deseen desarrollar paquetes que "
4194 "usan debconf deberían leer B<debconf-devel>(7)."
4195
4196 #. type: Plain text
4197 #: debconf.7:274
4198 msgid ""
4199 "Briefly, debconf communicates with maintainer scripts or other programs via "
4200 "standard input and output, using a simple line-oriented command language "
4201 "similar to that used by common internet protocols such as SMTP. Programs use "
4202 "this protocol to ask debconf to display questions to the user, and retrieve "
4203 "the user's answers. The questions themselves are defined in a separate file, "
4204 "called the \"templates file\", which has a format not unlike a debian "
4205 "control file."
4206 msgstr ""
4207 "Resumiendo, debconf se comunica con los scripts del desarrollador u otros "
4208 "programas a través de la entrada y salida estándar usando un lenguaje "
4209 "parecido a la línea de órdenes similar a los usados por protocolos de "
4210 "Internet comunes, tales como SMTP. Los programas usan este protocolo para "
4211 "hacer que debconf muestre preguntas al usuario, y obtener sus respuestas. "
4212 "Las preguntas en sí se definen en un fichero separado, llamado el «fichero "
4213 "de plantillas», el cual tiene un formato similar al fichero de control de "
4214 "Debian."
4215
4216 #. type: Plain text
4217 #: debconf.7:278
4218 msgid ""
4219 "Debian packages which use debconf typically provide both a templates file "
4220 "and a \"config\" script (run to preconfigure the package) in the control "
4221 "metadata section of the package."
4222 msgstr ""
4223 "Habitualmente, los paquetes de Debian que usan debconf proporcionan un "
4224 "fichero de plantillas y un script de configuración (que se ejecuta para "
4225 "preconfigurar el paquete) en la sección de metadatos de control del paquete."
4226
4227 #. type: SH
4228 #: debconf.7:278
4229 #, no-wrap
4230 msgid "ENVIRONMENT"
4231 msgstr "VARIABLES DE ENTORNO"
4232
4233 #. type: TP
4234 #: debconf.7:279
4235 #, no-wrap
4236 msgid "B<DEBIAN_FRONTEND>"
4237 msgstr "B<DEBIAN_FRONTEND>"
4238
4239 #. type: Plain text
4240 #: debconf.7:282
4241 msgid "Used to temporarily change the frontend debconf uses. See above."
4242 msgstr ""
4243 "Se usa para cambiar temporalmente la interfaz de debconf. Consulte más "
4244 "arriba."
4245
4246 #. type: TP
4247 #: debconf.7:282
4248 #, no-wrap
4249 msgid "B<DEBIAN_PRIORITY>"
4250 msgstr "B<DEBIAN_PRIORITY>"
4251
4252 #. type: Plain text
4253 #: debconf.7:286
4254 msgid ""
4255 "Used to temporarily change the minimum priority of question debconf will "
4256 "display. See above."
4257 msgstr ""
4258 "Se usa para cambiar temporalmente la prioridad mínima de la pregunta que "
4259 "debconf mostrará. Consulte más arriba."
4260
4261 #. type: TP
4262 #: debconf.7:286 debconf-devel.7:576
4263 #, no-wrap
4264 msgid "B<DEBCONF_DEBUG>"
4265 msgstr "B<DEBCONF_DEBUG>"
4266
4267 #. type: Plain text
4268 #: debconf.7:292
4269 msgid ""
4270 "Turns on debugging output on standard error. May be set to a facility name "
4271 "or a regular expression which matches a facility name (such as '.*' to "
4272 "output all debug info). The facility names include:"
4273 msgstr ""
4274 "Activa la salida de mensajes de depuración a través de la salida de error "
4275 "estándar. Se puede definir con el nombre de una utilidad («facility») o una "
4276 "expresión regular que coincide con el nombre de una función (como «.*» para "
4277 "mostrar toda la información de depuración). Los nombres de utilidad incluyen:"
4278
4279 #. type: TP
4280 #: debconf.7:292
4281 #, no-wrap
4282 msgid "B<user>"
4283 msgstr "B<user>"
4284
4285 #. type: Plain text
4286 #: debconf.7:295
4287 msgid "Debugging info of interest to a debconf user."
4288 msgstr "Información de depuración de interés para un usuario de debconf."
4289
4290 #. type: TP
4291 #: debconf.7:295
4292 #, no-wrap
4293 msgid "B<developer>"
4294 msgstr "B<developer>"
4295
4296 #. type: Plain text
4297 #: debconf.7:298
4298 msgid "Debugging info of interest to a package developer."
4299 msgstr ""
4300 "Información de depuración de interés para un desarrollador de paquetes."
4301
4302 #. type: TP
4303 #: debconf.7:298
4304 #, no-wrap
4305 msgid "B<db>"
4306 msgstr "B<db>"
4307
4308 #. type: Plain text
4309 #: debconf.7:301
4310 msgid "Debugging info about the backend database."
4311 msgstr "Información de depuración del sistema de base de datos."
4312
4313 #. type: TP
4314 #: debconf.7:302
4315 #, no-wrap
4316 msgid "B<DEBCONF_NOWARNINGS>"
4317 msgstr "B<DEBCONF_NOWARNINGS>"
4318
4319 #. type: Plain text
4320 #: debconf.7:306
4321 msgid ""
4322 "Set to \"yes\" to disable some warnings that debconf may display. Does not "
4323 "suppress display of fatal errors."
4324 msgstr ""
4325 "Se define con «yes» para desactivar algunos avisos que debconf puede "
4326 "mostrar. No suprime mostrar los errores fatales."
4327
4328 #. type: TP
4329 #: debconf.7:306
4330 #, no-wrap
4331 msgid "B<DEBCONF_TERSE>"
4332 msgstr "B<DEBCONF_TERSE>"
4333
4334 #. type: Plain text
4335 #: debconf.7:310
4336 msgid ""
4337 "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on "
4338 "the verbiage as much as possible."
4339 msgstr ""
4340 "Se define con «yes» para activar el modo conciso, en el cual las interfaces "
4341 "de debconf reducen la verbosidad tanto como es posible."
4342
4343 #. type: TP
4344 #: debconf.7:310
4345 #, no-wrap
4346 msgid "B<DEBCONF_DB_FALLBACK>"
4347 msgstr "B<DEBCONF_DB_FALLBACK>"
4348
4349 #. type: Plain text
4350 #: debconf.7:320
4351 msgid ""
4352 "Stack a database after the normally used databases, so that it is used as a "
4353 "fallback to get configuration information from. See \"Unattended Package "
4354 "Installation\" above. If the value of the variable is the name of an "
4355 "existing database in debconf.conf, then that database will be used. "
4356 "Otherwise, the environment variable can be used to configure a database on "
4357 "the fly, by telling the type of database, and optionally passing field:value "
4358 "settings, inside curly braces after the type. Spaces are used to separate "
4359 "fields, so you cannot specify a field value containing whitespace."
4360 msgstr ""
4361 "Apila («stack») una base de datos después de las bases de datos usadas "
4362 "habitualmente, de forma que se usa como una alternativa de dónde obtener la "
4363 "información de configuración. Consulte «Instalación desatendida de "
4364 "paquetes», más arriba. Si el valor de la variable es el nombre de una base "
4365 "de datos existente en «debconf.conf», se usará esa base de datos. De no ser "
4366 "así, la variable de entorno se puede usar para configurar una base de datos "
4367 "en el momento, diciendo el tipo de base datos e introduciendo de forma "
4368 "opcional las opciones «campo:valor» entre corchetes, {}, después del tipo de "
4369 "base de datos. Los campos se separan con espacios, y por ello no puede "
4370 "definir un valor de campo que tenga espacios en blanco."
4371
4372 #. type: Plain text
4373 #: debconf.7:323
4374 #, no-wrap
4375 msgid ""
4376 "Thus, this uses the fallbackdb in debconf.conf:\n"
4377 " DEBCONF_DB_FALLBACK=fallbackdb\n"
4378 msgstr ""
4379 "Por lo tanto, esto usa «fallbackdb» en «debconf.conf»:\n"
4380 " DEBCONF_DB_FALLBACK=fallbackdb\n"
4381
4382 #. type: Plain text
4383 #: debconf.7:327
4384 #, no-wrap
4385 msgid ""
4386 "While this sets up a new database of type File, and tells it a filename to\n"
4387 "use and turns off backups:\n"
4388 " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n"
4389 msgstr ""
4390 "Mientras que esto configura una base de datos nueva de tipo «File»,\n"
4391 "y le dice el nombre de fichero a usar, desactivando las copias de\n"
4392 "respaldo:\n"
4393 " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n"
4394
4395 #. type: Plain text
4396 #: debconf.7:330
4397 #, no-wrap
4398 msgid ""
4399 "And as a shorthand, this sets up a database of type File with a filename:\n"
4400 " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n"
4401 msgstr ""
4402 "Y de forma abreviada, esto configura una base de datos de tipo «File» con\n"
4403 "un nombre de fichero:\n"
4404 " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n"
4405
4406 #. type: Plain text
4407 #: debconf.7:333
4408 msgid ""
4409 "Note that if a fallback database is set up on the fly, it will be read-only "
4410 "by default."
4411 msgstr ""
4412 "Observe que una base de datos alternativa se configura en el momento, y por "
4413 "omisión es de sólo lectura."
4414
4415 #. type: TP
4416 #: debconf.7:333
4417 #, no-wrap
4418 msgid "B<DEBCONF_DB_OVERRIDE>"
4419 msgstr "B<DEBCONF_DB_OVERRIDE>"
4420
4421 #. type: Plain text
4422 #: debconf.7:338
4423 msgid ""
4424 "Stack a database before the normally used databases, so that it can override "
4425 "values from them. The value of the variable works the same as does the value "
4426 "of DEBCONF_DB_FALLBACK."
4427 msgstr ""
4428 "Apila una base de datos sobre las bases de datos usadas habitualmente, de "
4429 "forma que anula los valores contenidos en éstos. El valor de la variable "
4430 "funciona de la misma forma que el valor de «DEBCONF_DB_FALLBACK»."
4431
4432 #. type: TP
4433 #: debconf.7:338
4434 #, no-wrap
4435 msgid "B<DEBCONF_DB_REPLACE>"
4436 msgstr "B<DEBCONF_DB_REPLACE>"
4437
4438 #. type: Plain text
4439 #: debconf.7:343
4440 msgid ""
4441 "Use a given database instead of the normally used databases. This may be "
4442 "useful for testing with a separate database without having to create a "
4443 "separate debconf.conf, or to avoid locking the normal databases."
4444 msgstr ""
4445 "Usa una base de datos dada en lugar de las bases de datos usadas "
4446 "habitualmente. Puede ser útil para realizar pruebas con una base de datos "
4447 "separada sin la necesidad de crear un fichero «debconf.conf» independiente, "
4448 "o para evitar el bloqueo de las bases de datos normales."
4449
4450 #. type: TP
4451 #: debconf.7:343
4452 #, no-wrap
4453 msgid "B<DEBCONF_SYSTEMRC>"
4454 msgstr "B<DEBCONF_SYSTEMRC>"
4455
4456 #. type: Plain text
4457 #: debconf.7:349
4458 msgid ""
4459 "If this environment variable is set, debconf will ignore a user's ~/."
4460 "debconfrc file, and use the system one instead. If it is set to the name of "
4461 "a regular file, debconf will use that file in preference to the system "
4462 "configuration files."
4463 msgstr ""
4464 "Si se define esta variable de entorno, debconf omitirá el fichero de usuario "
4465 "«~/.debconfrc» y usará en su lugar el del sistema. Si se define con el "
4466 "nombre de un fichero normal, debconf usará ese fichero en lugar de los "
4467 "ficheros de configuración del sistema."
4468
4469 #. type: TP
4470 #: debconf.7:349
4471 #, no-wrap
4472 msgid "B<DEBCONF_FORCE_DIALOG>"
4473 msgstr "B<DEBCONF_FORCE_DIALOG>"
4474
4475 #. type: Plain text
4476 #: debconf.7:353
4477 msgid ""
4478 "If this environment variable is set, debconf will use dialog in preference "
4479 "to whiptail for the dialog frontend."
4480 msgstr ""
4481 "Si se define esta variable de entorno, debconf utilizará dialog en lugar de "
4482 "whiptail como la interfaz de diálogo de debconf."
4483
4484 #. type: TP
4485 #: debconf.7:353
4486 #, no-wrap
4487 msgid "B<DEBCONF_FORCE_XDIALOG>"
4488 msgstr "B<DEBCONF_FORCE_XDIALOG>"
4489
4490 #. type: Plain text
4491 #: debconf.7:357
4492 msgid ""
4493 "If this environment variable is set, debconf will use Xdialog in preference "
4494 "to whiptail for the dialog frontend."
4495 msgstr ""
4496 "Si se define esta variable de entorno, debconf utilizará Xdialog en lugar de "
4497 "whiptail como la interfaz de diálogo."
4498
4499 #. type: TP
4500 #: debconf.7:357
4501 #, no-wrap
4502 msgid "B<DEBCONF_NONINTERACTIVE_SEEN>"
4503 msgstr "B<DEBCONF_NONINTERACTIVE_SEEN>"
4504
4505 #. type: Plain text
4506 #: debconf.7:361
4507 msgid ""
4508 "Set to \"true\" to cause the seen flag to be set for questions asked in the "
4509 "noninteractive frontend."
4510 msgstr ""
4511 "Se define con «true» para provocar que la marca «seen» se establezca en las "
4512 "preguntas planteadas en la interfaz no interactiva."
4513
4514 #. type: SH
4515 #: debconf.7:361
4516 #, no-wrap
4517 msgid "BUGS"
4518 msgstr "FALLOS"
4519
4520 #. type: Plain text
4521 #: debconf.7:363
4522 msgid "Probably quite a few, there's a lot of code here."
4523 msgstr "Posiblemente varios, este programa tiene mucho código."
4524
4525 #. type: Plain text
4526 #: debconf.7:365
4527 msgid ""
4528 "If you do file a bug report, be sure to include the following information:"
4529 msgstr ""
4530 "Si remite un informe de fallo, asegúrese de incluir la siguiente información:"
4531
4532 #. type: TP
4533 #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469
4534 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484
4535 #: debconf-devel.7:489
4536 #, no-wrap
4537 msgid "B<*>"
4538 msgstr "B<*>"
4539
4540 #. type: Plain text
4541 #: debconf.7:368
4542 msgid "The debconf frontend you were using when the problem occurred"
4543 msgstr ""
4544 "La interfaz de debconf que estaba usando cuando se detectó el problema."
4545
4546 #. type: Plain text
4547 #: debconf.7:371
4548 msgid "What you did to trigger the problem."
4549 msgstr "Qué hizo para desencadenar el problema."
4550
4551 #. type: Plain text
4552 #: debconf.7:376
4553 msgid ""
4554 "The full text of any error messages. If you can reproduce the bug, do so "
4555 "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot."
4556 msgstr ""
4557 "El texto completo de cualquier mensaje de error. Si puede reproducir el "
4558 "fallo, hágalo con «DEBCONF_DEBUG='.*' » definido («set») y exportado "
4559 "(«export»). Esto agiliza mucho la depuración."
4560
4561 #. type: Plain text
4562 #: debconf.7:382
4563 msgid ""
4564 "B<debconf.conf>(5), B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-"
4565 "reconfigure>(8), B<debconf>(1),"
4566 msgstr ""
4567 "B<debconf.conf>(5), B<debconf-devel>(7), B<dpkg-preconfigure>(8), B<dpkg-"
4568 "reconfigure>(8), B<debconf>(1),"
4569
4570 #. type: TH
4571 #: debconf-devel.7:1
4572 #, no-wrap
4573 msgid "DEBCONF-DEVEL"
4574 msgstr "DEBCONF-DEVEL"
4575
4576 #. type: Plain text
4577 #: debconf-devel.7:4
4578 msgid "debconf - developers guide"
4579 msgstr "debconf - Guía del desarrollador"
4580
4581 #. type: Plain text
4582 #: debconf-devel.7:6
4583 msgid "This is a guide for developing packages that use debconf."
4584 msgstr "Esta es una guía para el desarrollo de paquetes que usan debconf."
4585
4586 #. type: Plain text
4587 #: debconf-devel.7:9
4588 msgid ""
4589 "This manual assumes that you are familiar with debconf as a user, and are "
4590 "familiar with the basics of debian package construction."
4591 msgstr ""
4592 "Este manual asume que está familiarizado con debconf como usuario, y que "
4593 "conoce los conceptos básicos de la construcción de paquetes debian."
4594
4595 #. type: Plain text
4596 #: debconf-devel.7:18
4597 msgid ""
4598 "This manual begins by explaining two new files that are added to debian "
4599 "packages that use debconf. Then it explains how the debconf protocol works, "
4600 "and points you at some libraries that will let your programs speak the "
4601 "protocol. It discusses other maintainer scripts that debconf is typically "
4602 "used in: the postinst and postrm scripts. Then moves on to more advanced "
4603 "topics like shared debconf templates, debugging, and some common techniques "
4604 "and pitfalls of programming with debconf. It closes with a discussion of "
4605 "debconf's current shortcomings."
4606 msgstr ""
4607 "Este manual comienza explicando dos nuevos ficheros que se añaden a paquetes "
4608 "debian que usan debconf. A continuación, explica cómo funciona el protocolo "
4609 "de debconf, y señala las bibliotecas que permitirán que sus programas hablen "
4610 "tal protocolo. Se discuten otros scripts de desarrollador que habitualmente "
4611 "usan debconf: los scripts postinst (postinstalación) y postrm "
4612 "(posteliminación). Continua con temas más avanzados como el sistema de "
4613 "plantillas compartidas de debconf, depuración de fallos, y algunas técnicas "
4614 "comunes y problemas a la hora de programar con debconf. Finaliza con un "
4615 "análisis de las deficiencias actuales de debconf."
4616
4617 #. type: SH
4618 #: debconf-devel.7:18
4619 #, no-wrap
4620 msgid "THE CONFIG SCRIPT"
4621 msgstr "EL SCRIPT CONFIG"
4622
4623 #. type: Plain text
4624 #: debconf-devel.7:23
4625 msgid ""
4626 "Debconf adds an additional maintainer script, the config script, to the set "
4627 "of maintainer scripts that can be in debian packages (the postinst, preinst, "
4628 "postrm, and prerm). The config script is responsible for asking any "
4629 "questions necessary to configure the package."
4630 msgstr ""
4631 "Debconf añade un script de desarrollador adicional, el script «config», al "
4632 "conjunto de scripts de desarrollador que pueden existir en paquetes debian "
4633 "(«postinst», «preinst», «postrm», y «prerm»). El script «config» es el "
4634 "responsable de plantear cualquier pregunta necesaria para la configuración "
4635 "del paquete."
4636
4637 #. type: Plain text
4638 #: debconf-devel.7:28
4639 msgid ""
4640 "Note: It is a little confusing that dpkg refers to running a package's "
4641 "postinst script as \"configuring\" the package, since a package that uses "
4642 "debconf is often fully pre-configured, by its config script, before the "
4643 "postinst ever runs. Oh well."
4644 msgstr ""
4645 "Nota: Es un poco confuso que dpkg se refiere a ejecutar el script «postinst» "
4646 "como la «configuración» del paquete, ya que, habitualmente, un paquete que "
4647 "usa debconf está totalmente preconfigurado mediante el script «config» antes "
4648 "de que se ejecute el script de postinstalación. Pero bueno."
4649
4650 #. type: Plain text
4651 #: debconf-devel.7:34
4652 msgid ""
4653 "Like the postinst, the config script is passed two parameters when it is "
4654 "run. The first tells what action is being performed, and the second is the "
4655 "version of the package that is currently installed. So, like in a postinst, "
4656 "you can use dpkg --compare-versions on $2 to make some behavior happen only "
4657 "on upgrade from a particular version of a package, and things like that."
4658 msgstr ""
4659 "Al igual que el script «postinst», el script «config» acepta dos parámetros "
4660 "cuando se ejecuta. El primero dice la acción que se está realizando, y el "
4661 "segundo la versión del paquete actualmente instalado. Por lo tanto, al igual "
4662 "que con un script «postinst», puede usar «dpkg --compare-versions» con «$2» "
4663 "para hacer que un comportamiento sólo aparezca durante la actualización a "
4664 "partir de una versión en particular, y otros comportamientos parecidos."
4665
4666 #. type: Plain text
4667 #: debconf-devel.7:36
4668 msgid "The config script can be run in one of three ways:"
4669 msgstr "El script «config» se puede ejecutar de tres formas distintas:"
4670
4671 #. type: TP
4672 #: debconf-devel.7:36
4673 #, no-wrap
4674 msgid "B<1>"
4675 msgstr "B<1>"
4676
4677 #. type: Plain text
4678 #: debconf-devel.7:40
4679 msgid ""
4680 "If a package is pre-configured, with dpkg-preconfigure, its config script is "
4681 "run, and is passed the parameters \"configure\", and installed-version."
4682 msgstr ""
4683 "Si el paquete está preconfigurado con «dpkg-preconfigure», se ejecuta el "
4684 "script «config» y se le introducen los parámetros «configure» y la versión "
4685 "instalada («installed-version»)."
4686
4687 #. type: TP
4688 #: debconf-devel.7:40
4689 #, no-wrap
4690 msgid "B<2>"
4691 msgstr "B<2>"
4692
4693 #. type: Plain text
4694 #: debconf-devel.7:47
4695 msgid ""
4696 "When a package's postinst is run, debconf will try to run the config script "
4697 "then too, and it will be passed the same parameters it was passed when it is "
4698 "pre-configured. This is necessary because the package might not have been "
4699 "pre-configured, and the config script still needs to get a chance to run. "
4700 "See HACKS for details."
4701 msgstr ""
4702 "Cuando se ejecuta el script «postinst» de un paquete debconf intentará "
4703 "ejecutar también el script «config», al que se le introducirán los mismos "
4704 "parámetros que se introducen cuando se preconfigura. Es necesario ya que "
4705 "puede que el paquete aún no se haya preconfigurado, y que el script «config» "
4706 "todavía necesite una oportunidad para ejecutarse. Para más detalles consulte "
4707 "«ARREGLOS»."
4708
4709 #. type: TP
4710 #: debconf-devel.7:47
4711 #, no-wrap
4712 msgid "B<3>"
4713 msgstr "B<3>"
4714
4715 #. type: Plain text
4716 #: debconf-devel.7:52
4717 msgid ""
4718 "If a package is reconfigured, with dpkg-reconfigure, its config script it "
4719 "run, and is passed the parameters \"reconfigure\" and installed-version."
4720 msgstr ""
4721 "Si el paquete se reconfigura con «dpkg-reconfigure», se ejecuta el script "
4722 "«config», y se le introducen los parámetros «reconfigure» y la versión "
4723 "instalada («installed-version»)."
4724
4725 #. type: Plain text
4726 #: debconf-devel.7:58
4727 msgid ""
4728 "Note that since a typical package install or upgrade using apt runs steps 1 "
4729 "and 2, the config script will typically be run twice. It should do nothing "
4730 "the second time (to ask questions twice in a row is annoying), and it should "
4731 "definitely be idempotent. Luckily, debconf avoids repeating questions by "
4732 "default, so this is generally easy to accomplish."
4733 msgstr ""
4734 "Tenga en cuenta que ya que una instalación o actualización típica de "
4735 "paquetes mediante apt ejecuta los pasos 1 y 2, el script «config» se "
4736 "ejecutará dos veces. No debería hacer nada (plantear las mismas preguntas "
4737 "dos veces seguidas es molesto), y debería ser idempotente. Afortunadamente, "
4738 "debconf evita repetir preguntas por omisión, así que esto es generalmente "
4739 "fácil de realizar."
4740
4741 #. type: Plain text
4742 #: debconf-devel.7:64
4743 msgid ""
4744 "Note that the config script is run before the package is unpacked. It should "
4745 "only use commands that are in essential packages. The only dependency of "
4746 "your package that is guaranteed to be met when its config script is run is a "
4747 "dependency (possibly versioned) on debconf itself."
4748 msgstr ""
4749 "Observe que el script «config» se ejecuta antes de desempaquetar el paquete. "
4750 "Sólo debería usar órdenes que están en los paquetes esenciales "
4751 "(«essential»). La única dependencia que su paquete tendrá de forma "
4752 "obligatoria al ejecutar el script «config» es el mismo debconf (posiblemente "
4753 "versionada)."
4754
4755 #. type: Plain text
4756 #: debconf-devel.7:70
4757 msgid ""
4758 "The config script should not need to modify the filesystem at all. It just "
4759 "examines the state of the system, and asks questions, and debconf stores the "
4760 "answers to be acted on later by the postinst script. Conversely, the "
4761 "postinst script should almost never use debconf to ask questions, but should "
4762 "instead act on the answers to questions asked by the config script."
4763 msgstr ""
4764 "El script «config» no debería necesitar modificar el sistema de ficheros de "
4765 "ninguna forma. Simplemente, examina el estado del sistema y plantea "
4766 "preguntas, y debconf guarda las respuestas para usarlas después a través del "
4767 "script «postinst». Por el contrario, el script «postinst» nunca debería usar "
4768 "debconf para plantear preguntas, sino que debería actuar en base a las "
4769 "respuestas a las preguntas planteadas por el script «config»."
4770
4771 #. type: SH
4772 #: debconf-devel.7:70
4773 #, no-wrap
4774 msgid "THE TEMPLATES FILE"
4775 msgstr "EL FICHERO DE PLANTILLAS"
4776
4777 #. type: Plain text
4778 #: debconf-devel.7:73
4779 msgid ""
4780 "A package that uses debconf probably wants to ask some questions. These "
4781 "questions are stored, in template form, in the templates file."
4782 msgstr ""
4783 "Probablemente, un paquete que usa debconf desea plantear algunas preguntas. "
4784 "Estas preguntas se guardan, en de plantilla, en el fichero de plantillas."
4785
4786 #. type: Plain text
4787 #: debconf-devel.7:78
4788 msgid ""
4789 "Like the config script, the templates file is put in the control.tar.gz "
4790 "section of a deb. Its format is similar to a debian control file; a set of "
4791 "stanzas separated by blank lines, with each stanza having a RFC822-like form:"
4792 msgstr ""
4793 "Al igual que el script «config», el fichero de plantillas se ubica en la "
4794 "sección «control.tar.gz» de un paquete «.deb». Su formato es similar al "
4795 "fichero de control de debian, un conjunto de definiciones separadas por "
4796 "líneas en blanco. Cada definición tiene una forma similar al formato RFC822:"
4797
4798 #. type: Plain text
4799 #: debconf-devel.7:94
4800 #, no-wrap
4801 msgid ""
4802 " Template: foo/bar\n"
4803 " Type: string\n"
4804 " Default: foo\n"
4805 " Description: This is a sample string question.\n"
4806 " This is its extended description.\n"
4807 " .\n"
4808 " Notice that:\n"
4809 " - Like in a debian package description, a dot\n"
4810 " on its own line sets off a new paragraph.\n"
4811 " - Most text is word-wrapped, but doubly-indented\n"
4812 " text is left alone, so you can use it for lists\n"
4813 " of items, like this list. Be careful, since\n"
4814 " it is not word-wrapped, if it's too wide\n"
4815 " it will look bad. Using it for short items\n"
4816 " is best (so this is a bad example).\n"
4817 msgstr ""
4818 " Template: foo/bar\n"
4819 " Type: string\n"
4820 " Default: foo\n"
4821 " Description: Este es un ejemplo de pregunta de tipo cadena.\n"
4822 " Esta es su descripción extendida.\n"
4823 " .\n"
4824 " Tenga en cuenta:\n"
4825 " - Al igual que en la descripción de un paquete debian,\n"
4826 " un punto en una línea vacía inicia un nuevo párrafo.\n"
4827 " - La mayoría del texto se justifica, pero el texto con\n"
4828 " doble sangrado no se modifica, así que puede usarlo\n"
4829 " para listas de elementos como esta lista. Tenga\n"
4830 " cuidado ya que no se justifica, y tendrá un pobre\n"
4831 " aspecto si es demasiado ancho. Es mejor usarlo con\n"
4832 " elementos cortos (y por ello éste es un mal ejemplo).\n"
4833
4834 #. type: Plain text
4835 #: debconf-devel.7:99
4836 #, no-wrap
4837 msgid ""
4838 " Template: foo/baz\n"
4839 " Type: boolean\n"
4840 " Description: Clear enough, no?\n"
4841 " This is another question, of boolean type.\n"
4842 msgstr ""
4843 " Template: foo/baz\n"
4844 " Type: boolean\n"
4845 " Description: Es obvio, ¿no?\n"
4846 " Esta es otra pregunta, de tipo booleano.\n"
4847
4848 #. type: Plain text
4849 #: debconf-devel.7:103
4850 msgid ""
4851 "For some real-life examples of templates files, see /var/lib/dpkg/info/"
4852 "debconf.templates, and other .templates files in that directory."
4853 msgstr ""
4854 "Si desea ver ejemplos de uso reales de ficheros de plantillas consulte «/var/"
4855 "lib/dpkg/info/debconf.templates» y otros ficheros «.templates» en ese "
4856 "directorio."
4857
4858 #. type: Plain text
4859 #: debconf-devel.7:105
4860 msgid "Let's look at each of the fields in turn.."
4861 msgstr "Ahora vamos a explicar cada uno de los campos."
4862
4863 #. type: TP
4864 #: debconf-devel.7:105
4865 #, no-wrap
4866 msgid "B<Template>"
4867 msgstr "B<Template>"
4868
4869 #. type: Plain text
4870 #: debconf-devel.7:111
4871 msgid ""
4872 "The name of the template, in the 'Template' field, is generally prefixed "
4873 "with the name of the package. After that the namespace is wide open; you can "
4874 "use a simple flat layout like the one above, or set up \"subdirectories\" "
4875 "containing related questions."
4876 msgstr ""
4877 "El nombre de la plantilla, en el campo «Template», tiene habitualmente como "
4878 "prefijo el nombre del paquete. A continuación de esto, el espacio de nombres "
4879 "está abierto; puede usar un sencillo diseño plano como el que aparece antes, "
4880 "o definir «subdirectorios», que contienen las preguntas relacionadas."
4881
4882 #. type: TP
4883 #: debconf-devel.7:111
4884 #, no-wrap
4885 msgid "B<Type>"
4886 msgstr "B<Type>"
4887
4888 #. type: Plain text
4889 #: debconf-devel.7:115
4890 msgid ""
4891 "The type of the template determines what kind of widget is displayed to the "
4892 "user. The currently supported types are:"
4893 msgstr ""
4894 "El tipo de plantilla determina el tipo de elemento que se muestra al "
4895 "usuario. Los tipos aceptados actualmente son:"
4896
4897 #. type: TP
4898 #: debconf-devel.7:116
4899 #, no-wrap
4900 msgid "B<string>"
4901 msgstr "B<string>"
4902
4903 #. type: Plain text
4904 #: debconf-devel.7:119
4905 msgid ""
4906 "Results in a free-form input field that the user can type any string into."
4907 msgstr ""
4908 "Resulta en un campo de entrada con formato libre en el que el usuario puede "
4909 "introducir cualquier cadena."
4910
4911 #. type: TP
4912 #: debconf-devel.7:119
4913 #, no-wrap
4914 msgid "B<password>"
4915 msgstr "B<password>"
4916
4917 #. type: Plain text
4918 #: debconf-devel.7:124
4919 msgid ""
4920 "Prompts the user for a password. Use this with caution; be aware that the "
4921 "password the user enters will be written to debconf's database. You should "
4922 "probably clean that value out of the database as soon as is possible."
4923 msgstr ""
4924 "Solicita una contraseña al usuario. Úselo con precaución; tenga en cuenta "
4925 "que la contraseña que el usuario introduzca se escribirá en la base de datos "
4926 "de debconf. Probablemente, debería eliminar ese valor de la base de datos "
4927 "tan pronto como sea posible."
4928
4929 #. type: TP
4930 #: debconf-devel.7:124
4931 #, no-wrap
4932 msgid "B<boolean>"
4933 msgstr "B<boolean>"
4934
4935 #. type: Plain text
4936 #: debconf-devel.7:127
4937 msgid "A true/false choice."
4938 msgstr "Una elección «true/false» (verdadero/falso)."
4939
4940 #. type: TP
4941 #: debconf-devel.7:127
4942 #, no-wrap
4943 msgid "B<select>"
4944 msgstr "B<select>"
4945
4946 #. type: Plain text
4947 #: debconf-devel.7:132
4948 msgid ""
4949 "A choice between one of a number of values. The choices must be specified in "
4950 "a field named 'Choices'. Separate the possible values with commas and "
4951 "spaces, like this:"
4952 msgstr ""
4953 "Una elección de un valor entre un número de valores. Las posibles elecciones "
4954 "se deben definir en un campo llamado «Choices». Separe los valores posibles "
4955 "con comas y espacios, como se ve a continuación."
4956
4957 #. type: Plain text
4958 #: debconf-devel.7:134
4959 #, no-wrap
4960 msgid " Choices: yes, no, maybe\n"
4961 msgstr " Choices: yes, no, maybe\n"
4962
4963 #. type: TP
4964 #: debconf-devel.7:135
4965 #, no-wrap
4966 msgid "B<multiselect>"
4967 msgstr "B<multiselect>"
4968
4969 #. type: Plain text
4970 #: debconf-devel.7:139
4971 msgid ""
4972 "Like the select data type, except the user can choose any number of items "
4973 "from the choices list (or choose none of them)."
4974 msgstr ""
4975 "Similar al tipo datos «select», a excepción de que el usuario puede "
4976 "seleccionar cualquier número de elementos de la lista de elecciones (o no "
4977 "seleccionar ninguno)."
4978
4979 #. type: TP
4980 #: debconf-devel.7:139
4981 #, no-wrap
4982 msgid "B<note>"
4983 msgstr "B<note>"
4984
4985 #. type: Plain text
4986 #: debconf-devel.7:147
4987 msgid ""
4988 "Rather than being a question per se, this datatype indicates a note that can "
4989 "be displayed to the user. It should be used only for important notes that "
4990 "the user really should see, since debconf will go to great pains to make "
4991 "sure the user sees it; halting the install for them to press a key. It's "
4992 "best to use these only for warning about very serious problems, and the "
4993 "error datatype is often more suitable."
4994 msgstr ""
4995 "Más que una pregunta, este tipo de dato indica una nota que se puede mostrar "
4996 "al usuario. Sólo se debería usar para notas importantes que el usuario "
4997 "realmente debería ver, ya que debconf sufrirá complicaciones para asegurarse "
4998 "de que el usuario lo ve; interrumpirá la instalación para que puedan pulsar "
4999 "una tecla. Es mejor usar este aviso sólo para problemas serios, y a menudo "
5000 "es más adecuado usar el tipo de dato «error» ."
5001
5002 #. type: TP
5003 #: debconf-devel.7:147
5004 #, no-wrap
5005 msgid "B<error>"
5006 msgstr "B<error>"
5007
5008 #. type: Plain text
5009 #: debconf-devel.7:152
5010 msgid ""
5011 "This datatype is used for error messages, such as input validation errors. "
5012 "Debconf will show a question of this type even if the priority is too high "
5013 "or the user has already seen it."
5014 msgstr ""
5015 "Este tipo de dato se usa para mensajes de error, tales como los errores de "
5016 "validación de entradas. Debconf mostrará una pregunta de este tipo incluso "
5017 "si la prioridad es demasiado alta o si el usuario ya la ha visto."
5018
5019 #. type: TP
5020 #: debconf-devel.7:152
5021 #, no-wrap
5022 msgid "B<title>"
5023 msgstr "B<title>"
5024
5025 #. type: Plain text
5026 #: debconf-devel.7:155
5027 msgid "This datatype is used for titles, to be set with the SETTITLE command."
5028 msgstr ""
5029 "Este tipo de datos se usa para títulos, que se definirán con la orden "
5030 "«SETTITLE»."
5031
5032 #. type: TP
5033 #: debconf-devel.7:155
5034 #, no-wrap
5035 msgid "B<text>"
5036 msgstr "B<text>"
5037
5038 #. type: Plain text
5039 #: debconf-devel.7:162
5040 msgid ""
5041 "This datatype can be used for fragments of text, such as labels, that can be "
5042 "used for cosmetic reasons in the displays of some frontends. Other frontends "
5043 "will not use it at all. There is no point in using this datatype yet, since "
5044 "no frontends support it well. It may even be removed in the future."
5045 msgstr ""
5046 "Este tipo de datos se puede usar para fragmentos de texto tales como "
5047 "etiquetas, que se pueden usar por razones estéticas en las ventanas de "
5048 "algunas interfaces. Otras interfaces no harán uso de él. Aún no existe "
5049 "ninguna razón para usar este tipo de dato ya que ninguna interfaz lo permite "
5050 "de forma adecuada. Incluso puede que se elimine en el futuro."
5051
5052 #. type: TP
5053 #: debconf-devel.7:163
5054 #, no-wrap
5055 msgid "B<Default>"
5056 msgstr "B<Default>"
5057
5058 #. type: Plain text
5059 #: debconf-devel.7:171
5060 msgid ""
5061 "The 'Default' field tells debconf what the default value should be. For "
5062 "multiselect, it can be a list of choices, separated by commas and spaces, "
5063 "similar to the 'Choices' field. For select, it should be one of the choices. "
5064 "For boolean, it is \"true\" or \"false\", while it can be anything for a "
5065 "string, and it is ignored for passwords."
5066 msgstr ""
5067 "El campo «Default» dice a debconf cuál debería ser el valor predefinido. Con "
5068 "«multiselect», puede ser una lista de elecciones separadas por comas y "
5069 "espacios, de forma similar al campo «Choices». Con «select», debería ser una "
5070 "de las elecciones. Con «boolean», es «true» o «false». Puede ser cualquier "
5071 "cosa con «string», y se ignora con «passwords»."
5072
5073 #. type: Plain text
5074 #: debconf-devel.7:178
5075 msgid ""
5076 "Don't make the mistake of thinking that the default field contains the "
5077 "\"value\" of the question, or that it can be used to change the value of the "
5078 "question. It does not, and cannot, it just provides a default value for the "
5079 "first time the question is displayed. To provide a default that changes on "
5080 "the fly, you'd have to use the SET command to change the value of a question."
5081 msgstr ""
5082 "No cometa el error de pensar que el campo «Default» contiene el valor de la "
5083 "pregunta, o que se puede usar para cambiar el valor de la pregunta. No puede "
5084 "hacer esto, y no debería. Simplemente ofrece el valor predefinido para la "
5085 "primera vez que se muestra la pregunta. Para proporcionar un valor "
5086 "predefinido que se pueda modificar en el momento, tendrá que usar la orden "
5087 "«SET» para cambiar el valor de una pregunta."
5088
5089 #. type: TP
5090 #: debconf-devel.7:179
5091 #, no-wrap
5092 msgid "B<Description>"
5093 msgstr "B<Description>"
5094
5095 #. type: Plain text
5096 #: debconf-devel.7:187
5097 msgid ""
5098 "The 'Description' field, like the description of a Debian package, has two "
5099 "parts: A short description and an extended description. Note that some "
5100 "debconf frontends don't display the long description, or might only display "
5101 "it if the user asks for help. So the short description should be able to "
5102 "stand on its own."
5103 msgstr ""
5104 "El campo «Description» tiene dos partes, al igual que la descripción de un "
5105 "paquete de Debian: una descripción corta y una descripción extendida. Tenga "
5106 "en cuenta que algunas interfaces de debconf no muestran la descripción "
5107 "extendida, o puede que sólo la muestren si el usuario solicita ayuda. Por "
5108 "ello, la descripción corta debería ser suficientemente completa."
5109
5110 #. type: Plain text
5111 #: debconf-devel.7:193
5112 msgid ""
5113 "If you can't think up a long description, then first, think some more. Post "
5114 "to debian-devel. Ask for help. Take a writing class! That extended "
5115 "description is important. If after all that you still can't come up with "
5116 "anything, leave it blank. There is no point in duplicating the short "
5117 "description."
5118 msgstr ""
5119 "Si no puede inventarse una descripción larga, primero, piense un poco más. "
5120 "Mande un correo a debian-devel. Pida ayuda. ¡Tome clases de composición de "
5121 "texto! La descripción extendida es importante. Si después de todo esto aún "
5122 "no se le ha ocurrido nada, deje el espacio en blanco. No tiene sentido "
5123 "duplicar la descripción corta."
5124
5125 #. type: Plain text
5126 #: debconf-devel.7:198
5127 msgid ""
5128 "Text in the extended description will be word-wrapped, unless it is prefixed "
5129 "by additional whitespace (beyond the one required space). You can break it "
5130 "up into separate paragraphs by putting \" .\" on a line by itself between "
5131 "them."
5132 msgstr ""
5133 "El texto de la descripción extendida se justificará, a menos que esté "
5134 "precedido por un espacio blanco adicional (además del espacio requerido). "
5135 "Puede dividirlo en varios párrafos insertando «.» en una línea vacía entre "
5136 "los párrafos."
5137
5138 #. type: SH
5139 #: debconf-devel.7:199
5140 #, no-wrap
5141 msgid "QUESTIONS"
5142 msgstr "PREGUNTAS"
5143
5144 #. type: Plain text
5145 #: debconf-devel.7:211
5146 msgid ""
5147 "A question is an instantiated template. By asking debconf to display a "
5148 "question, your config script can interact with the user. When debconf loads "
5149 "a templates file (this happens whenever a config or postinst script is run), "
5150 "it automatically instantiates a question from each template. It is actually "
5151 "possible to instantiate several independent questions from the same template "
5152 "(using the REGISTER command), but that is rarely necessary. Templates are "
5153 "static data that comes from the templates file, while questions are used to "
5154 "store dynamic data, like the current value of the question, whether a user "
5155 "has seen a question, and so on. Keep the distinction between a template and "
5156 "a question in mind, but don't worry too much about it."
5157 msgstr ""
5158 "Una pregunta es una instancia de plantilla. Al pedir a debconf que muestre "
5159 "una pregunta, su script «config» puede interactuar con el usuario. Cuando "
5160 "debconf carga un fichero de plantillas (esto ocurre cada vez que se ejecuta "
5161 "un script «config» o «postinst») automáticamente crea una instancia para "
5162 "cada pregunta de cada plantilla. Es posible crear instancias de varias "
5163 "preguntas independientes a partir de la misma plantilla (usando la orden "
5164 "«REGISTER»), pero rara vez es necesario. Las plantillas son datos estáticos "
5165 "que proceden del fichero de plantillas, mientras que las preguntas se usan "
5166 "para almacenar datos dinámicos, tales como el valor actual de la pregunta, "
5167 "si el usuario ha visto la pregunta, y así en adelante. Tenga en cuenta la "
5168 "diferencia entre una plantilla y una pregunta, pero no se preocupe demasiado "
5169 "por ello."
5170
5171 #. type: SH
5172 #: debconf-devel.7:211
5173 #, no-wrap
5174 msgid "SHARED TEMPLATES"
5175 msgstr "PLANTILLAS COMPARTIDAS"
5176
5177 #. type: Plain text
5178 #: debconf-devel.7:218
5179 msgid ""
5180 "It's actually possible to have a template and a question that are shared "
5181 "among a set of packages. All the packages have to provide an identical copy "
5182 "of the template in their templates files. This can be useful if a bunch of "
5183 "packages need to ask the same question, and you only want to bother the user "
5184 "with it once. Shared templates are generally put in the shared/ pseudo-"
5185 "directory in the debconf template namespace."
5186 msgstr ""
5187 "Es posible tener una plantilla y una pregunta compartidas por un conjunto de "
5188 "paquetes. Todos los paquetes deben proporcionar una copia idéntica de la "
5189 "plantilla en sus ficheros de plantillas. Puede ser útil si un conjunto de "
5190 "paquetes necesitan plantear la misma pregunta, y sólo desea consultar al "
5191 "usuario una sola vez. Habitualmente, las plantillas compartidas se ubican en "
5192 "el seudo directorio «shared/» en el espacio de nombres («namespace») de la "
5193 "plantilla de debconf."
5194
5195 #. type: SH
5196 #: debconf-devel.7:218
5197 #, no-wrap
5198 msgid "THE DEBCONF PROTOCOL"
5199 msgstr "EL PROTOCOLO DE DEBCONF"
5200
5201 #. type: Plain text
5202 #: debconf-devel.7:224
5203 msgid ""
5204 "Config scripts communicate with debconf using the debconf protocol. This is "
5205 "a simple line-oriented protocol, similar to common internet protocols such "
5206 "as SMTP. The config script sends debconf a command by writing the command to "
5207 "standard output. Then it can read debconf's reply from standard input."
5208 msgstr ""
5209 "Los scripts «config» se comunican con debconf usando el protocolo de "
5210 "debconf. Éste es un sencillo protocolo orientado a la línea de órdenes, "
5211 "similar a protocolos comunes de Internet tales como SMTP. El script «config» "
5212 "envía una orden a debconf enviando la orden por la salida estándar. A "
5213 "continuación, puede leer la respuesta de debconf por la entrada estándar."
5214
5215 #. type: Plain text
5216 #: debconf-devel.7:230
5217 msgid ""
5218 "Debconf's reply can be broken down into two parts: A numeric result code "
5219 "(the first word of the reply), and an optional extended result code (the "
5220 "remainder of the reply). The numeric code uses 0 to indicate success, and "
5221 "other numbers to indicate various kinds of failure. For full details, see "
5222 "the table in Debian policy's debconf specification document."
5223 msgstr ""
5224 "La respuesta de debconf se puede dividir en dos partes. Un código de salida "
5225 "numérico (la primera palabra de la respuesta), y opcionalmente un código de "
5226 "salida extendido (el resto de la respuesta). El código numérico usa cero "
5227 "para indicar éxito, y otros números para indicar varios tipos de fallo. Para "
5228 "más detalles, consulte la tabla en el documento de especificaciones de "
5229 "debconf en las normas de Debian (debian-policy)."
5230
5231 #. type: Plain text
5232 #: debconf-devel.7:235
5233 msgid ""
5234 "The extended return code is generally free form and unspecified, so you "
5235 "should generally ignore it, and should certainly not try to parse it in a "
5236 "program to work out what debconf is doing. The exception is commands like "
5237 "GET, that cause a value to be returned in the extended return code."
5238 msgstr ""
5239 "El código de salida extendido tiene, habitualmente, una forma libre y sin "
5240 "especificar, así que generalmente debería ignorarlo, y definitivamente no "
5241 "debería intentar analizarlo con un programa para averiguar lo que debconf "
5242 "está haciendo. La excepción son órdenes como «GET», que hacen que un valor "
5243 "se devuelva en el código de salida extendido."
5244
5245 #. type: Plain text
5246 #: debconf-devel.7:239
5247 msgid ""
5248 "Generally you'll want to use a language-specific library that handles the "
5249 "nuts and bolts of setting up these connections to debconf and communicating "
5250 "with it."
5251 msgstr ""
5252 "Habitualmente, querrá usar una biblioteca de lenguaje específico que "
5253 "gestiona los particularidades de creación de estas conexiones con debconf y "
5254 "la comunicación con éste."
5255
5256 #. type: Plain text
5257 #: debconf-devel.7:242
5258 msgid ""
5259 "For now, here are the commands in the protocol. This is not the definitive "
5260 "definition, see Debian policy's debconf specification document for that."
5261 msgstr ""
5262 "Por ahora, aquí tiene las órdenes en el protocolo. Esta no es la definición "
5263 "completa; para ello, consulte el documento de especificaciones de debconf en "
5264 "las normas de Debian (debian-policy)."
5265
5266 #. type: TP
5267 #: debconf-devel.7:242
5268 #, no-wrap
5269 msgid "B<VERSION number>"
5270 msgstr "B<VERSION número>"
5271
5272 #. type: Plain text
5273 #: debconf-devel.7:250
5274 msgid ""
5275 "You generally don't need to use this command. It exchanges with debconf the "
5276 "protocol version number that is being used. The current protocol version is "
5277 "2.0, and versions in the 2.x series will be backwards-compatible. You may "
5278 "specify the protocol version number you are speaking and debconf will return "
5279 "the version of the protocol it speaks in the extended result code. If the "
5280 "version you specify is too low, debconf will reply with numeric code 30."
5281 msgstr ""
5282 "Generalmente no tendrá que usar esta orden. Intercambia con debconf el "
5283 "número de versión del protocolo que se está usando. La versión del protocolo "
5284 "actual es 2.0, y las versiones de la serie 2.x tendrán compatibilidad hacia "
5285 "atrás. Puede definir el número de versión del protocolo que está usando y "
5286 "debconf devolverá la versión del protocolo que está usando en el código de "
5287 "salida extendido. Si la versión que define es demasiado baja, debconf "
5288 "responderá con el código numérico 30."
5289
5290 #. type: TP
5291 #: debconf-devel.7:250
5292 #, no-wrap
5293 msgid "B<CAPB capabilities>"
5294 msgstr "B<CAPB funcionalidades>"
5295
5296 #. type: Plain text
5297 #: debconf-devel.7:257
5298 #, fuzzy
5299 #| msgid ""
5300 #| "You generally don't need to use this command. It exchanges with debconf a "
5301 #| "list of supported capabilities. Capabilities that both you and debconf "
5302 #| "support will be used, and debconf will reply with all the capabilities it "
5303 #| "supports."
5304 msgid ""
5305 "You generally don't need to use this command. It exchanges with debconf a "
5306 "list of supported capabilities (separated by spaces). Capabilities that both "
5307 "you and debconf support will be used, and debconf will reply with all the "
5308 "capabilities it supports."
5309 msgstr ""
5310 "Generalmente no tendrá que usar esta orden. Intercambia con debconf una "
5311 "lista de funcionalidades aceptadas. Se usarán la funcionalidades que el "
5312 "script y debconf aceptan, y debconf responderá con todas las funcionalidades "
5313 "que permite."
5314
5315 #. type: Plain text
5316 #: debconf-devel.7:267
5317 msgid ""
5318 "If 'escape' is found among your capabilities, debconf will expect commands "
5319 "you send it to have backslashes and newlines escaped (as \\e\\e and \\en "
5320 "respectively) and will in turn escape backslashes and newlines in its "
5321 "replies. This can be used, for example, to substitute multi-line strings "
5322 "into templates, or to get multi-line extended descriptions reliably using "
5323 "METAGET. In this mode, you must escape input text yourself (you can use "
5324 "B<debconf-escape>(1) to help with this if you want), but the confmodule "
5325 "libraries will unescape replies for you."
5326 msgstr ""
5327 "Si «escape» está entre sus funcionalidades, debconf esperará que las órdenes "
5328 "que envíe tengan escapes de barras inversas y nuevas líneas (como «\\e\\e» y "
5329 "«\\en» respectivamente), y responderá con barras inversas y nuevas líneas "
5330 "escapadas. Esto se puede usar, por ejemplo, para sustituir cadenas de varias "
5331 "líneas en plantillas, o para obtener descripciones extendidas de varias "
5332 "líneas adecuadamente usando METAGET. Si usa este modo, tendrá que escapar el "
5333 "texto de entrada (o puede usar B<debconf-escape>(1) para que le asista en "
5334 "esta labor si así lo desea), pero las bibliotecas confmodule devolverán "
5335 "respuestas sin escapes."
5336
5337 #. type: TP
5338 #: debconf-devel.7:268
5339 #, no-wrap
5340 msgid "B<SETTITLE question>"
5341 msgstr "B<SETTITLE pregunta>"
5342
5343 #. type: Plain text
5344 #: debconf-devel.7:275
5345 msgid ""
5346 "This sets the title debconf displays to the user, using the short "
5347 "description of the template for the specified question. The template should "
5348 "be of type title. You rarely need to use this command since debconf can "
5349 "automatically generate a title based on your package's name."
5350 msgstr ""
5351 "Esto define el título que debconf muestra al usuario, usando la descripción "
5352 "corta de la plantilla para la pregunta especificada. La plantilla debería de "
5353 "ser de tipo «title». Rara vez necesitará usar esta orden ya que debconf "
5354 "puede generar automáticamente un título a partir del nombre del paquete."
5355
5356 #. type: Plain text
5357 #: debconf-devel.7:278
5358 msgid ""
5359 "Setting the title from a template means they are stored in the same place as "
5360 "the rest of the debconf questions, and allows them to be translated."
5361 msgstr ""
5362 "Configurar el título a partir de la plantilla significa que se guardan en la "
5363 "misma ubicación que el resto de las preguntas de debconf, permitiendo su "
5364 "traducción."
5365
5366 #. type: TP
5367 #: debconf-devel.7:279
5368 #, no-wrap
5369 msgid "B<TITLE string>"
5370 msgstr "B<TITLE cadena>"
5371
5372 #. type: Plain text
5373 #: debconf-devel.7:284
5374 msgid ""
5375 "This sets the title debconf displays to the user to the specified string. "
5376 "Use of the SETTITLE command is normally to be preferred as it allows for "
5377 "translation of the title."
5378 msgstr ""
5379 "Esto define el título que debconf muestra al usuario con la cadena "
5380 "especificada. Habitualmente, se prefiere el uso de la orden «SETTITLE» ya "
5381 "que permite la traducción del título."
5382
5383 #. type: TP
5384 #: debconf-devel.7:284
5385 #, no-wrap
5386 msgid "B<INPUT priority question>"
5387 msgstr "B<INPUT prioridad pregunta>"
5388
5389 #. type: Plain text
5390 #: debconf-devel.7:291
5391 msgid ""
5392 "Ask debconf to prepare to display a question to the user. The question is "
5393 "not actually displayed until a GO command is issued; this lets several INPUT "
5394 "commands be given in series, to build up a set of questions, which might all "
5395 "be asked on a single screen."
5396 msgstr ""
5397 "Hace que debconf se prepare para mostrar una pregunta al usuario. La "
5398 "pregunta no se muestra realmente hasta que no se emita una orden «GO»; esto "
5399 "permite introducir en serie varias órdenes «INPUT» para construir una serie "
5400 "de preguntas que se podrían plantear en una sola pantalla."
5401
5402 #. type: Plain text
5403 #: debconf-devel.7:294
5404 msgid ""
5405 "The priority field tells debconf how important it is that this question be "
5406 "shown to the user. The priority values are:"
5407 msgstr ""
5408 "El campo de prioridad indica a debconf la importancia de la pregunta "
5409 "mostrada al usuario. Los valores de prioridad son:"
5410
5411 #. type: Plain text
5412 #: debconf-devel.7:298
5413 msgid ""
5414 "Very trivial items that have defaults that will work in the vast majority of "
5415 "cases; only control freaks see these."
5416 msgstr ""
5417 "Elementos muy triviales que tienen valores predefinidos que funcionarán en "
5418 "la inmensa mayoría de los casos. Sólo los obsesos del control deberían "
5419 "verlos."
5420
5421 #. type: Plain text
5422 #: debconf-devel.7:301
5423 msgid "Normal items that have reasonable defaults."
5424 msgstr "Elementos normales con valores predefinidos razonables."
5425
5426 #. type: Plain text
5427 #: debconf-devel.7:304
5428 msgid "Items that don't have a reasonable default."
5429 msgstr "Elementos que no tienen un valor predefinido razonable."
5430
5431 #. type: Plain text
5432 #: debconf-devel.7:307
5433 msgid "Items that will probably break the system without user intervention."
5434 msgstr ""
5435 "Elementos que posiblemente rompan el sistema sin la intervención del usuario."
5436
5437 #. type: Plain text
5438 #: debconf-devel.7:312
5439 msgid ""
5440 "Debconf decides if the question is actually displayed, based on its "
5441 "priority, and whether the user has seen it before, and which frontend is "
5442 "being used. If the question will not be displayed, debconf replies with code "
5443 "30."
5444 msgstr ""
5445 "Debconf decide si se muestra la pregunta en base a la prioridad, si el "
5446 "usuario la ha visto ya, y la interfaz que se está usando. Si la pregunta no "
5447 "se va a mostrar, debconf responde con el código numérico 30."
5448
5449 #. type: TP
5450 #: debconf-devel.7:313
5451 #, no-wrap
5452 msgid "B<GO>"
5453 msgstr "B<GO>"
5454
5455 #. type: Plain text
5456 #: debconf-devel.7:318
5457 msgid ""
5458 "Tells debconf to display the accumulated set of questions (from INPUT "
5459 "commands) to the user."
5460 msgstr ""
5461 "Indica a debconf que muestre al usuario el conjunto acumulado de preguntas "
5462 "(de órdenes «INPUT»)."
5463
5464 #. type: Plain text
5465 #: debconf-devel.7:321
5466 msgid ""
5467 "If the backup capability is supported and the user indicates they want to "
5468 "back up a step, debconf replies with code 30."
5469 msgstr ""
5470 "Si se admite la funcionalidad de copia de seguridad y el usuario indica que "
5471 "desea retroceder, debconf responde con el código numérico 30."
5472
5473 #. type: TP
5474 #: debconf-devel.7:322
5475 #, no-wrap
5476 msgid "B<CLEAR>"
5477 msgstr "B<CLEAR>"
5478
5479 #. type: Plain text
5480 #: debconf-devel.7:326
5481 msgid ""
5482 "Clears the accumulated set of questions (from INPUT commands) without "
5483 "displaying them."
5484 msgstr ""
5485 "Elimina el conjunto acumulado de preguntas (de órdenes «INPUT») sin "
5486 "mostrarlas."
5487
5488 #. type: TP
5489 #: debconf-devel.7:326
5490 #, no-wrap
5491 msgid "B<BEGINBLOCK>"
5492 msgstr "B<BEGINBLOCK>"
5493
5494 #. type: TP
5495 #: debconf-devel.7:328
5496 #, no-wrap
5497 msgid "B<ENDBLOCK>"
5498 msgstr "B<ENDBLOCK>"
5499
5500 #. type: Plain text
5501 #: debconf-devel.7:336
5502 msgid ""
5503 "Some debconf frontends can display a number of questions to the user at "
5504 "once. Maybe in the future a frontend will even be able to group these "
5505 "questions into blocks on screen. BEGINBLOCK and ENDBLOCK can be placed "
5506 "around a set of INPUT commands to indicate blocks of questions (and blocks "
5507 "can even be nested). Since no debconf frontend is so sophisticated yet, "
5508 "these commands are ignored for now."
5509 msgstr ""
5510 "Algunas interfaces de debconf pueden mostrar varias preguntas a la vez al "
5511 "usuario. Puede que en el futuro, una interfaz sea también capaz de agrupar "
5512 "en bloque estas preguntas en la pantalla. «BEGINBLOCK» y «ENDBLOCK» se "
5513 "pueden ubicar en torno a un conjunto de órdenes «INPUT» para indicar bloques "
5514 "de preguntas (y los bloques se pueden anidar también). Ya que ninguna "
5515 "interfaz de debconf es aún tan sofisticada, estas órdenes se ignorarán por "
5516 "ahora."
5517
5518 #. type: TP
5519 #: debconf-devel.7:336
5520 #, no-wrap
5521 msgid "B<STOP>"
5522 msgstr "B<STOP>"
5523
5524 #. type: Plain text
5525 #: debconf-devel.7:340
5526 msgid ""
5527 "This command tells debconf that you're done talking to it. Often debconf can "
5528 "detect termination of your program and this command is not necessary."
5529 msgstr ""
5530 "Esta orden indica a debconf que ya ha terminado de comunicarse con él. "
5531 "Habitualmente debconf puede detectar la finalización de su programa, con lo "
5532 "cual esta orden no sería necesaria."
5533
5534 #. type: TP
5535 #: debconf-devel.7:340
5536 #, no-wrap
5537 msgid "B<GET question>"
5538 msgstr "B<GET pregunta>"
5539
5540 #. type: Plain text
5541 #: debconf-devel.7:345
5542 msgid ""
5543 "After using INPUT and GO to display a question, you can use this command to "
5544 "get the value the user entered. The value is returned in the extended result "
5545 "code."
5546 msgstr ""
5547 "Después de usar «INPUT» y «GO» para mostrar una pregunta, puede usar esta "
5548 "orden para obtener el valor que introdujo el usuario. El valor se devuelve "
5549 "en el código de salida extendido."
5550
5551 #. type: TP
5552 #: debconf-devel.7:345
5553 #, no-wrap
5554 msgid "B<SET question value>"
5555 msgstr "B<SET pregunta valor>"
5556
5557 #. type: Plain text
5558 #: debconf-devel.7:349
5559 msgid ""
5560 "This sets the value of a question, and it can be used to override the "
5561 "default value with something your program calculates on the fly."
5562 msgstr ""
5563 "Define el valor de la pregunta, y se puede usar para reemplazar el valor "
5564 "predefinido con un cálculo que su programa haga durante el proceso."
5565
5566 #. type: TP
5567 #: debconf-devel.7:349
5568 #, no-wrap
5569 msgid "B<RESET question>"
5570 msgstr "B<RESET pregunta>"
5571
5572 #. type: Plain text
5573 #: debconf-devel.7:353
5574 msgid ""
5575 "This resets the question to its default value (as is specified in the "
5576 "'Default' field of its template)."
5577 msgstr ""
5578 "Restablece la pregunta a su valor predefinido (tal y como está definido en "
5579 "el campo «Default» de su plantilla)."
5580
5581 #. type: TP
5582 #: debconf-devel.7:353
5583 #, no-wrap
5584 msgid "B<SUBST question key value>"
5585 msgstr "B<SUBST pregunta clave valor>"
5586
5587 #. type: Plain text
5588 #: debconf-devel.7:362
5589 msgid ""
5590 "Questions can have substitutions embedded in their 'Description' and "
5591 "'Choices' fields (use of substitutions in 'Choices' fields is a bit of a "
5592 "hack though; a better mechanism will eventually be developed). These "
5593 "substitutions look like \"${key}\". When the question is displayed, the "
5594 "substitutions are replaced with their values. This command can be used to "
5595 "set the value of a substitution. This is useful if you need to display some "
5596 "message to the user that you can't hard-code in the templates file."
5597 msgstr ""
5598 "Las preguntas pueden integrar sustituciones en sus campos «Description» y "
5599 "«Choices» (el uso de sustituciones en campos «Choices» no está demasiado "
5600 "bien hecho; con el tiempo se desarrollará un mecanismo mejor). Estas "
5601 "sustituciones tiene la apariencia «${key}». Cuando se muestra la pregunta, "
5602 "las sustituciones se reemplazan con sus valores. Esta orden se puede usar "
5603 "para definir el valor de una sustitución. Es útil si necesita mostrar "
5604 "algunos mensajes al usuario, las cuales no desea integrar en el código "
5605 "(«hardcode») en el fichero de plantillas."
5606
5607 #. type: Plain text
5608 #: debconf-devel.7:365
5609 msgid ""
5610 "Do not try to use SUBST to change the default value of a question; it won't "
5611 "work since there is a SET command explicitly for that purpose."
5612 msgstr ""
5613 "No intente usar «SUBST» para cambiar el valor predefinido de una pregunta; "
5614 "no funcionará ya que existe una orden «SET» para ese propósito."
5615
5616 #. type: TP
5617 #: debconf-devel.7:365
5618 #, no-wrap
5619 msgid "B<FGET question flag>"
5620 msgstr "B<FGET pregunta marca>"
5621
5622 #. type: Plain text
5623 #: debconf-devel.7:369
5624 msgid ""
5625 "Questions can have flags associated with them. The flags can have a value of "
5626 "\"true\" or \"false\". This command returns the value of a flag."
5627 msgstr ""
5628 "Las preguntas pueden tener marcas asociadas a ellas. Las marcas pueden tener "
5629 "un valor de «true» (verdadero) o «false» (falso)."
5630
5631 #. type: TP
5632 #: debconf-devel.7:369
5633 #, no-wrap
5634 msgid "B<FSET question flag value>"
5635 msgstr "B<FSET pregunta marca valor>"
5636
5637 #. type: Plain text
5638 #: debconf-devel.7:374
5639 msgid ""
5640 "This sets the value of a question's flag. The value must be either \"true\" "
5641 "or \"false\"."
5642 msgstr ""
5643 "Esto define el valor de la marca de una pregunta. El valor debe ser «true» o "
5644 "«false»."
5645
5646 #. type: Plain text
5647 #: debconf-devel.7:380
5648 msgid ""
5649 "One common flag is the \"seen\" flag. It is normally only set if a user has "
5650 "already seen a question. Debconf usually only displays questions to users if "
5651 "they have the seen flag set to \"false\" (or if it is reconfiguring a "
5652 "package). Sometimes you want the user to see a question again -- in these "
5653 "cases you can set the seen flag to false to force debconf to redisplay it."
5654 msgstr ""
5655 "Una marca común es la marca «seen». Habitualmente, sólo se define si el "
5656 "usuario ya ha viso la pregunta. Generalmente, debconf sólo muestra preguntas "
5657 "a los usuarios si la marca «seen» está definida con «false» (o si está "
5658 "reconfigurando el paquete). A veces desea que el usuario vea la pregunta "
5659 "otra vez; en estos casos puede definir la marca «seen» con el valor «false» "
5660 "para forzar a debconf a que la muestre otra vez."
5661
5662 #. type: TP
5663 #: debconf-devel.7:381
5664 #, no-wrap
5665 msgid "B<METAGET question field>"
5666 msgstr "B<METAGET pregunta campo>"
5667
5668 #. type: Plain text
5669 #: debconf-devel.7:385
5670 msgid ""
5671 "This returns the value of any field of a question's associated template (the "
5672 "Description, for example)."
5673 msgstr ""
5674 "Devuelve el valor de cualquier campo de una plantilla asociada a la pregunta "
5675 "(«Description», por ejemplo)."
5676
5677 #. type: TP
5678 #: debconf-devel.7:385
5679 #, no-wrap
5680 msgid "B<REGISTER template question>"
5681 msgstr "B<REGISTER plantilla pregunta>"
5682
5683 #. type: Plain text
5684 #: debconf-devel.7:391
5685 msgid ""
5686 "This creates a new question that is bound to a template. By default each "
5687 "template has an associated question with the same name. However, any number "
5688 "of questions can really be associated with a template, and this lets you "
5689 "create more such questions."
5690 msgstr ""
5691 "Crea una nueva pregunta ligada a una plantilla. Por omisión, cada plantilla "
5692 "tiene una pregunta asociada con el mismo nombre. Sin embargo, se pueden "
5693 "asociar cualquier número de preguntas a una plantilla, permitiendo la "
5694 "creación de más preguntas."
5695
5696 #. type: TP
5697 #: debconf-devel.7:391
5698 #, no-wrap
5699 msgid "B<UNREGISTER question>"
5700 msgstr "B<UNREGISTER pregunta>"
5701
5702 #. type: Plain text
5703 #: debconf-devel.7:394
5704 msgid "This removes a question from the database."
5705 msgstr "Elimina una pregunta de la base de datos."
5706
5707 #. type: TP
5708 #: debconf-devel.7:394
5709 #, no-wrap
5710 msgid "B<PURGE>"
5711 msgstr "B<PURGE>"
5712
5713 #. type: Plain text
5714 #: debconf-devel.7:398
5715 msgid ""
5716 "Call this in your postrm when your package is purged. It removes all of your "
5717 "package's questions from debconf's database."
5718 msgstr ""
5719 "Invoque esto en el script «postrm» al purgar el paquete. Elimina todas las "
5720 "preguntas de su paquete de la base de datos de debconf."
5721
5722 #. type: TP
5723 #: debconf-devel.7:398
5724 #, no-wrap
5725 msgid "B<X_LOADTEMPLATEFILE /path/to/templates [owner]>"
5726 msgstr "B<X_LOADTEMPLATEFILE /ruta/a/plantillas [propietario]>"
5727
5728 #. type: Plain text
5729 #: debconf-devel.7:402
5730 msgid ""
5731 "This extension loads the specified template file into debconf's database. "
5732 "The owner defaults to the package that is being configured with debconf."
5733 msgstr ""
5734 "Esta extensión carga el fichero de plantilla especificado, en la base de "
5735 "datos de debconf. El propietario recibe el valor predefinido del paquete que "
5736 "se está configurando con debconf."
5737
5738 #. type: Plain text
5739 #: debconf-devel.7:404
5740 msgid "Here is a simple example of the debconf protocol in action."
5741 msgstr "Aquí tiene un sencillo ejemplo del protocolo de debconf en acción."
5742
5743 #. type: Plain text
5744 #: debconf-devel.7:418
5745 #, no-wrap
5746 msgid ""
5747 " INPUT medium debconf/frontend\n"
5748 " 30 question skipped\n"
5749 " FSET debconf/frontend seen false\n"
5750 " 0 false\n"
5751 " INPUT high debconf/frontend\n"
5752 " 0 question will be asked\n"
5753 " GO\n"
5754 " [ Here debconf displays a question to the user. ]\n"
5755 " 0 ok\n"
5756 " GET no/such/question\n"
5757 " 10 no/such/question doesn't exist\n"
5758 " GET debconf/frontend\n"
5759 " 0 Dialog\n"
5760 msgstr ""
5761 " INPUT medium debconf/frontend\n"
5762 " 30 question skipped\n"
5763 " FSET debconf/frontend seen false\n"
5764 " 0 false\n"
5765 " INPUT high debconf/frontend\n"
5766 " 0 question will be asked\n"
5767 " GO\n"
5768 " [ Aquí, debconf muestra al usuario una pregunta. ]\n"
5769 " 0 ok\n"
5770 " GET no/such/question\n"
5771 " 10 no/such/question doesn't exist\n"
5772 " GET debconf/frontend\n"
5773 " 0 Dialog\n"
5774
5775 #. type: SH
5776 #: debconf-devel.7:418
5777 #, no-wrap
5778 msgid "LIBRARIES"
5779 msgstr "BIBLIOTECAS"
5780
5781 #. type: Plain text
5782 #: debconf-devel.7:422
5783 msgid ""
5784 "Setting things up so you can talk to debconf, and speaking the debconf "
5785 "protocol by hand is a little too much work, so some thin libraries exist to "
5786 "relieve this minor drudgery."
5787 msgstr ""
5788 "Configurar manualmente lo necesario para poder hablar con debconf mediante "
5789 "el protocolo de debconf es quizá demasiado trabajo, y por ello existen "
5790 "algunas pequeñas bibliotecas para aliviar este arduo trabajo."
5791
5792 #. type: Plain text
5793 #: debconf-devel.7:430
5794 msgid ""
5795 "For shell programming, there is the /usr/share/debconf/confmodule library, "
5796 "which you can source at the top of a shell script, and talk to debconf in a "
5797 "fairly natural way, using lower-case versions of the debconf protocol "
5798 "commands, that are prefixed with \"db_\" (ie, \"db_input\" and \"db_go\"). "
5799 "For details, see B<confmodule>(3) ."
5800 msgstr ""
5801 "Para la programación en consola existe la biblioteca «/usr/share/debconf/"
5802 "confmodule», el cual puede cargar al principio del script de consola, y "
5803 "comunicarse con debconf con una relativa naturalidad usando las versiones en "
5804 "minúscula de las órdenes del protocolo de debconf, las cuales están "
5805 "prefijadas con «db_» (por ejemplo, «db_input» y «db_go»). Para más detalles, "
5806 "consulte B<confmodule>(3)."
5807
5808 #. type: Plain text
5809 #: debconf-devel.7:434
5810 msgid ""
5811 "Perl programmers can use the B<Debconf::Client::ConfModule>(3pm) perl "
5812 "module, and python programmers can use the debconf python module."
5813 msgstr ""
5814 "Los programadores que usan Perl pueden usar el módulo de Perl B<Debconf::"
5815 "Client::ConfModule(3pm)>, y los programadores que usan Python pueden usar el "
5816 "módulo de Python de debconf."
5817
5818 #. type: Plain text
5819 #: debconf-devel.7:438
5820 msgid ""
5821 "The rest of this manual will use the /usr/share/debconf/confmodule library "
5822 "in example shell scripts. Here is an example config script using that "
5823 "library, that just asks a question:"
5824 msgstr ""
5825 "El resto de este manual usará la biblioteca «/usr/share/debconf/confmodule» "
5826 "en los scripts de consola de ejemplo. Aquí tiene un script «config» de "
5827 "ejemplo que usa esa biblioteca, y que sólo plantea una pregunta:"
5828
5829 #. type: Plain text
5830 #: debconf-devel.7:445
5831 #, no-wrap
5832 msgid ""
5833 " #!/bin/sh\n"
5834 " set -e\n"
5835 " . /usr/share/debconf/confmodule\n"
5836 " db_set mypackage/reboot-now false\n"
5837 " db_input high mypackage/reboot-now || true\n"
5838 " db_go || true\n"
5839 msgstr ""
5840 " #!/bin/sh\n"
5841 " set -e\n"
5842 " . /usr/share/debconf/confmodule\n"
5843 " db_set mi-paquete/reboot-now false\n"
5844 " db_input high mi-paquete/reboot-now || true\n"
5845 " db_go || true\n"
5846
5847 #. type: Plain text
5848 #: debconf-devel.7:450
5849 msgid ""
5850 "Notice the uses of \"|| true\" to prevent the script from dying if debconf "
5851 "decides it can't display a question, or the user tries to back up. In those "
5852 "situations, debconf returns a non-zero exit code, and since this shell "
5853 "script is set -e, an untrapped exit code would make it abort."
5854 msgstr ""
5855 "Tenga en cuenta que el uso de «|| true» evita que el script finalice si "
5856 "debconf decide que no puede mostrar la pregunta, o si el usuario intenta "
5857 "retroceder. En estas situaciones debconf devuelve un código de salida "
5858 "distinto de cero, y debido a que este script usa «set -e», un código de "
5859 "salida sin variable de error («untrapped») haría que se cancelase."
5860
5861 #. type: Plain text
5862 #: debconf-devel.7:454
5863 msgid ""
5864 "And here is a corresponding postinst script, that uses the user's answer to "
5865 "the question to see if the system should be rebooted (a rather absurd "
5866 "example..):"
5867 msgstr ""
5868 "Y aquí tiene un script «postinst» correspondiente, que usa la respuesta del "
5869 "usuario a la pregunta para ver si se debería reiniciar el sistema (un "
5870 "ejemplo algo absurdo...):"
5871
5872 #. type: Plain text
5873 #: debconf-devel.7:462
5874 #, no-wrap
5875 msgid ""
5876 " #!/bin/sh\n"
5877 " set -e\n"
5878 " . /usr/share/debconf/confmodule\n"
5879 " db_get mypackage/reboot-now\n"
5880 " if [ \"$RET\" = true ]; then\n"
5881 " \tshutdown -r now\n"
5882 " fi\n"
5883 msgstr ""
5884 " #!/bin/sh\n"
5885 " set -e\n"
5886 " . /usr/share/debconf/confmodule\n"
5887 " db_get mi-paquete/reboot-now\n"
5888 " if [ \"$RET\" = true ]; then\n"
5889 " \tshutdown -r now\n"
5890 " fi\n"
5891
5892 #. type: Plain text
5893 #: debconf-devel.7:465
5894 msgid ""
5895 "Notice the use of the $RET variable to get at the extended return code from "
5896 "the GET command, which holds the user's answer to the question."
5897 msgstr ""
5898 "Tenga en cuenta el uso de la variable «$RET» para obtener un código de "
5899 "salida extendido de la orden «GET», que contiene la respuesta del usuario a "
5900 "la pregunta."
5901
5902 #. type: SH
5903 #: debconf-devel.7:465
5904 #, no-wrap
5905 msgid "THE POSTINST SCRIPT"
5906 msgstr "EL SCRIPT POSTINST"
5907
5908 #. type: Plain text
5909 #: debconf-devel.7:469
5910 msgid ""
5911 "The last section had an example of a postinst script that uses debconf to "
5912 "get the value of a question, and act on it. Here are some things to keep in "
5913 "mind when writing postinst scripts that use debconf:"
5914 msgstr ""
5915 "La última sección tenía un ejemplo de un script «postinst» que usa debconf "
5916 "para obtener el valor de una pregunta, y actuar en consecuencia. Existen "
5917 "algunas cosas que debe tener en cuenta al escribir scripts «postinst» que "
5918 "usan debconf:"
5919
5920 #. type: Plain text
5921 #: debconf-devel.7:473
5922 msgid ""
5923 "Avoid asking questions in the postinst. Instead, the config script should "
5924 "ask questions using debconf, so that pre-configuration will work."
5925 msgstr ""
5926 "Evite hacer preguntas en el «postinst». Por el contrario, el script «config» "
5927 "debería hacer preguntas mediante debconf, para que funcione la "
5928 "preconfiguración."
5929
5930 #. type: Plain text
5931 #: debconf-devel.7:479
5932 msgid ""
5933 "Always source /usr/share/debconf/confmodule at the top of your postinst, "
5934 "even if you won't be running any db_* commands in it. This is required to "
5935 "make sure the config script gets a chance to run (see HACKS for details)."
5936 msgstr ""
5937 "Cargue siempre «/usr/share/debconf/confmodule» al inicio de su «postinst», "
5938 "incluso si no va a ejecutar ninguna orden «db_*» desde el script. Es "
5939 "necesario para asegurar que el script «config» tenga la oportunidad de "
5940 "ejecutarse (para más detalles consulte «ARREGLOS»)."
5941
5942 #. type: Plain text
5943 #: debconf-devel.7:484
5944 msgid ""
5945 "Avoid outputting anything to stdout in your postinst, since that can confuse "
5946 "debconf, and postinst should not be verbose anyway. Output to stderr is ok, "
5947 "if you must."
5948 msgstr ""
5949 "Evite enviar cualquier información del «postinst» a través de la salida "
5950 "estándar ya que puede confundir a debconf, y de todas formas, «postinst» no "
5951 "debería ser informativo. Enviar información a la salida de error es "
5952 "aceptable, de ser necesario."
5953
5954 #. type: Plain text
5955 #: debconf-devel.7:489
5956 msgid ""
5957 "If your postinst launches a daemon, make sure you tell debconf to STOP at "
5958 "the end, since debconf can become a little confused about when your postinst "
5959 "is done otherwise."
5960 msgstr ""
5961 "Si su «postinst» inicia un demonio asegúrese de informar a debconf de que "
5962 "ejecute «STOP» al final, ya que de otra forma puede que debconf confunda el "
5963 "momento en que finaliza el script «postinst»."
5964
5965 #. type: Plain text
5966 #: debconf-devel.7:494
5967 msgid ""
5968 "Make your postinst script accept a first parameter of \"reconfigure\". It "
5969 "can treat it just like \"configure\". This will be used in a later version "
5970 "of debconf to let postinsts know when they are reconfigured."
5971 msgstr ""
5972 "Haga que el script «postinst» acepte «reconfigure» como primer parámetro. "
5973 "Puede tratarlo al igual que «configure». Se usará en futuras versiones de "
5974 "debconf para informar a los script «postinst» de cuándo se reconfiguran."
5975
5976 #. type: SH
5977 #: debconf-devel.7:494
5978 #, no-wrap
5979 msgid "OTHER SCRIPTS"
5980 msgstr "OTROS SCRIPTS"
5981
5982 #. type: Plain text
5983 #: debconf-devel.7:502
5984 msgid ""
5985 "Besides the config script and postinst, you can use debconf in any of the "
5986 "other maintainer scripts. Most commonly, you'll be using debconf in your "
5987 "postrm, to call the PURGE command when your package is purged, to clean out "
5988 "its entries in the debconf database. (This is automatically set up for you "
5989 "by B<dh_installdebconf>(1)B<,> by the way.)"
5990 msgstr ""
5991 "Aparte del script «config» y «postinst», puede usar debconf en cualquier "
5992 "otro script de encargado de paquetes. Habitualmente, usará debconf en su "
5993 "«postrm» para invocar la orden «PURGE» cuando purga su paquete y así "
5994 "eliminar sus entradas de la base de datos debconf. (Por cierto, está "
5995 "configurado automáticamente mediante B<dh_installdebconf>(1).)"
5996
5997 #. type: Plain text
5998 #: debconf-devel.7:510
5999 msgid ""
6000 "A more involved use of debconf would be if you want to use it in the postrm "
6001 "when your package is purged, to ask a question about deleting something. Or "
6002 "maybe you find you need to use it in the preinst or prerm for some reason. "
6003 "All of these uses will work, though they'll probably involve asking "
6004 "questions and acting on the answers in the same program, rather than "
6005 "separating the two activities as is done in the config and postinst scripts."
6006 msgstr ""
6007 "Un uso más complejo de debconf sería si desea usarlo en el script «postrm» "
6008 "al purgar el paquete para realizar una pregunta acerca de la eliminación de "
6009 "algo. O puede que se vea en la necesidad de usarlo en los script «preinst» o "
6010 "«prerm». Todos estos usos funcionarán, aunque probablemente incluyan "
6011 "plantear preguntas y actuar según la respuesta en el mismo programa, en "
6012 "lugar de separar las dos actividades como se hace con los scripts «config» y "
6013 "«postint»."
6014
6015 #. type: Plain text
6016 #: debconf-devel.7:515
6017 msgid ""
6018 "Note that if your package's sole use of debconf is in the postrm, you should "
6019 "make your package's postinst source /usr/share/debconf/confmodule, to give "
6020 "debconf a chance to load up your templates file into its database. Then the "
6021 "templates will be available when your package is being purged."
6022 msgstr ""
6023 "Tenga en cuenta que si el único uso que su paquete hace de debconf está en "
6024 "el script «postrm», debería comprobar que el script «postinst» del paquete "
6025 "carga «/usr/share/debconf/confmodule» para dar a debconf la oportunidad de "
6026 "cargar su fichero de plantillas en la base de datos. Así, las plantillas "
6027 "estarán disponibles al purgar su paquete."
6028
6029 #. type: Plain text
6030 #: debconf-devel.7:522
6031 msgid ""
6032 "You can also use debconf in other, standalone programs. The issue to watch "
6033 "out for here is that debconf is not intended to be, and must not be used as "
6034 "a registry. This is unix after all, and programs are configured by files in /"
6035 "etc, not by some nebulous debconf database (that is only a cache anyway and "
6036 "might get blown away). So think long and hard before using debconf in a "
6037 "standalone program."
6038 msgstr ""
6039 "También puede usar debconf con otros programas independientes. La cuestión "
6040 "que debe cuidar es que debconf no pretende ser, y no se debería usar, como "
6041 "un registro. Al fin y al cabo, esto es Unix, y los programas se configuran "
6042 "mediante ficheros en «/etc», y no mediante alguna difusa base de datos de "
6043 "debconf (que es sólo un almacén susceptible de desaparecer). Así que "
6044 "reflexione antes de usar debconf con un programa independiente."
6045
6046 #. type: Plain text
6047 #: debconf-devel.7:527
6048 msgid ""
6049 "There are times when it can make sense, as in the apt-setup program which "
6050 "uses debconf to prompt the user in a manner consistent with the rest of the "
6051 "debian install process, and immediately acts on their answers to set up "
6052 "apt's sources.list."
6053 msgstr ""
6054 "Hay situaciones en las que tiene sentido, por ejemplo con el programa apt-"
6055 "setup, que usa debconf para realizar preguntas al usuario de una forma "
6056 "consistente con el resto del proceso de instalación de Debian, y así actuar "
6057 "según las respuestas para configurar el fichero «sources.list» de apt."
6058
6059 #. type: SH
6060 #: debconf-devel.7:527
6061 #, no-wrap
6062 msgid "LOCALIZATION"
6063 msgstr "LOCALIZACIÓN"
6064
6065 #. type: Plain text
6066 #: debconf-devel.7:534
6067 msgid ""
6068 "Debconf supports localization of templates files. This is accomplished by "
6069 "adding more fields, with translated text in them. Any of the fields can be "
6070 "translated. For example, you might want to translate the description into "
6071 "Spanish. Just make a field named 'Description-es' that holds the "
6072 "translation. If a translated field is not available, debconf falls back to "
6073 "the normal English field."
6074 msgstr ""
6075 "Debconf permite la localización de ficheros de plantilla. Esto se consigue "
6076 "añadiendo más campos que contienen el texto traducido. Se pueden traducir "
6077 "cualquiera de los campos. Por ejemplo, puede que desee traducir la "
6078 "descripción al español. Simplemente, cree un campo llamado «Description-es» "
6079 "para contener la traducción. Si no se dispone de la traducción de un campo, "
6080 "debconf usa el campo en inglés de forma predefinida."
6081
6082 #. type: Plain text
6083 #: debconf-devel.7:540
6084 msgid ""
6085 "Besides the 'Description' field, you should translate the 'Choices' field of "
6086 "a select or multiselect template. Be sure to list the translated choices in "
6087 "the same order as they appear in the main 'Choices' field. You do not need "
6088 "to translate the 'Default' field of a select or multiselect question, and "
6089 "the value of the question will be automatically returned in English."
6090 msgstr ""
6091 "Además del campo «Description» también debería traducir el campo «Choices» "
6092 "de una plantilla «select» o «multiselect». Asegúrese de listar las opciones "
6093 "traducidas en el mismo orden en el que aparecen en el campo «Choices». No "
6094 "necesita traducir el campo «Default» de una pregunta «select» o "
6095 "«multiselect», y el valor del campo aparecerá automáticamente en inglés."
6096
6097 #. type: Plain text
6098 #: debconf-devel.7:552
6099 msgid ""
6100 "You will find it easier to manage translations if you keep them in separate "
6101 "files; one file per translation. In the past, the B<debconf-getlang>(1) and "
6102 "B<debconf-mergetemplate>(1) programs were used to manage debian/template.ll "
6103 "files. This has been superseded by the B<po-debconf>(7) package, which lets "
6104 "you deal with debconf translations in .po files, just like any other "
6105 "translations. Your translators will thank you for using this new improved "
6106 "mechanism."
6107 msgstr ""
6108 "Le resultará más fácil administrar las traducciones si las gestiona en "
6109 "ficheros separados; un fichero por traducción. En el pasado se usaban los "
6110 "programas B<debconf-getlang>(1) y B<debconf-mergetemplate>(1) para "
6111 "administrar los ficheros «debian/template.ll». Han quedado obsoletos por el "
6112 "paquete B<po-debconf>(7), que permite administrar traducciones de debconf en "
6113 "ficheros «.po», al igual que cualquier otra traducción. Sus traductores le "
6114 "estarán agradecidos por usar este nuevo y mejorado mecanismo."
6115
6116 #. type: Plain text
6117 #: debconf-devel.7:558
6118 msgid ""
6119 "For the details on po-debconf, see its man page. If you're using debhelper, "
6120 "converting to po-debconf is as simple as running the B<debconf-"
6121 "gettextize>(1) command once, and adding a Build-Dependency on po-debconf "
6122 "and on debhelper (E<gt>= 4.1.13)."
6123 msgstr ""
6124 "Para más detalles acerca de po-debconf, consulte su página de manual. Si usa "
6125 "debhelper, pasar a po-debconf es tan fácil como ejecutar la orden B<debconf-"
6126 "gettextize>(1) una sola vez, y añadir una dependencia de construcción sobre "
6127 "po-debconf y debhelper (E<gt>= 4.1.13)."
6128
6129 #. type: SH
6130 #: debconf-devel.7:558
6131 #, no-wrap
6132 msgid "PUTTING IT ALL TOGETHER"
6133 msgstr "INTEGRAR LAS DIFERENTES PARTES"
6134
6135 #. type: Plain text
6136 #: debconf-devel.7:568
6137 msgid ""
6138 "So you have a config script, a templates file, a postinst script that uses "
6139 "debconf, and so on. Putting these pieces together into a debian package "
6140 "isn't hard. You can do it by hand, or can use B<dh_installdebconf>(1) which "
6141 "will merge your translated templates, copy the files into the right places "
6142 "for you, and can even generate the call to PURGE that should go in your "
6143 "postrm script. Make sure that your package depends on debconf (E<gt>= 0.5), "
6144 "since earlier versions were not compatible with everything described in this "
6145 "manual. And you're done."
6146 msgstr ""
6147 "Así que tiene un script «config», un fichero de plantillas, un script "
6148 "«postinst» que usa debconf y así en adelante. Integrar todos estos elementos "
6149 "en un paquete debian no es muy difícil. Puede hacerlo a mano, o puede usar "
6150 "B<dh_installdebconf>(1), el cual fusionará sus plantillas traducidas, "
6151 "copiará los ficheros a las ubicaciones apropiadas, y puede incluso crear la "
6152 "invocación a «PURGE» que debería estar en su script «postrm». Compruebe que "
6153 "el paquete dependa de debconf (E<gt>= 0.5) ya que las versiones anteriores "
6154 "no son compatibles con todo lo descrito en este manual. Y esto es todo."
6155
6156 #. type: Plain text
6157 #: debconf-devel.7:571
6158 msgid ""
6159 "Well, except for testing, debugging, and actually using debconf for more "
6160 "interesting things than asking a few basic questions. For that, read on.."
6161 msgstr ""
6162 "Bueno, a excepción de probar, la depuración y en realidad usar debconf para "
6163 "cosas más interesantes que plantear unas pocas preguntas básicas. Para ello, "
6164 "siga leyendo..."
6165
6166 #. type: SH
6167 #: debconf-devel.7:571
6168 #, no-wrap
6169 msgid "DEBUGGING"
6170 msgstr "DEPURACIÓN"
6171
6172 #. type: Plain text
6173 #: debconf-devel.7:576
6174 msgid ""
6175 "So you have a package that's supposed to use debconf, but it doesn't quite "
6176 "work. Maybe debconf is just not asking that question you set up. Or maybe "
6177 "something weirder is happening; it spins forever in some kind of loop, or "
6178 "worse. Luckily, debconf has plenty of debugging facilities."
6179 msgstr ""
6180 "Así que tiene un paquete que debería usar debconf, pero que no llega a "
6181 "funcionar. Puede que debconf no plantee la pregunta que configuró. O puede "
6182 "que esté ocurriendo algo más raro; está atrapado en un especie de bucle, o "
6183 "peor. Afortunadamente, debconf ofrece muchas facilidades para su depuración."
6184
6185 #. type: Plain text
6186 #: debconf-devel.7:583
6187 msgid ""
6188 "The first thing to reach for is the DEBCONF_DEBUG environment variable. If "
6189 "you set and export DEBCONF_DEBUG=developer, debconf will output to stderr a "
6190 "dump of the debconf protocol as your program runs. It'll look something like "
6191 "this -- the typo is made clear:"
6192 msgstr ""
6193 "La primera cosa que tiene que hacer es configurar la variable de entorno "
6194 "«DEBCONF_DEBUG». Si ejecuta un «set» y «export» de "
6195 "«DEBCONF_DEBUG=developer», debconf enviará por la salida estándar un volcado "
6196 "del protocolo de debconf a medida que el programa se ejecuta. Es similar a "
6197 "esto, la errata es evidente (--):"
6198
6199 #. type: Plain text
6200 #: debconf-devel.7:588
6201 #, no-wrap
6202 msgid ""
6203 " debconf (developer): E<lt>-- input high debconf/frontand\n"
6204 " debconf (developer): --E<gt> 10 \"debconf/frontand\" doesn't exist\n"
6205 " debconf (developer): E<lt>-- go\n"
6206 " debconf (developer): --E<gt> 0 ok\n"
6207 msgstr ""
6208 " debconf (developer): E<lt>-- input high debconf/frontand\n"
6209 " debconf (developer): --E<gt> 10 \"debconf/frontand\" doesn't exist\n"
6210 " debconf (developer): E<lt>-- go\n"
6211 " debconf (developer): --E<gt> 0 ok\n"
6212
6213 #. type: Plain text
6214 #: debconf-devel.7:592
6215 msgid ""
6216 "It's rather useful to use debconf's readline frontend when you're debugging "
6217 "(in the author's opinion), as the questions don't get in the way, and all "
6218 "the debugging output is easily preserved and logged."
6219 msgstr ""
6220 "Es bastante útil usar la interfaz readline de debconf cuando realice la "
6221 "depuración (según la opinión del autor), ya que las preguntas no entorpecen "
6222 "la labor, y la salida de depuración se puede registrar y preservar con "
6223 "facilidad."
6224
6225 #. type: TP
6226 #: debconf-devel.7:593
6227 #, no-wrap
6228 msgid "B<DEBCONF_C_VALUES>"
6229 msgstr "B<DEBCONF_C_VALUES>"
6230
6231 #. type: Plain text
6232 #: debconf-devel.7:599
6233 msgid ""
6234 "If this environment variable is set to 'true', the frontend will display the "
6235 "values in Choices-C fields (if present) of select and multiselect templates "
6236 "rather than the descriptive values."
6237 msgstr ""
6238 "Si define esta variable de entorno como «true», la interfaz mostrará los "
6239 "valores en los campos «Choices-C» (de existir) de plantillas «select» y "
6240 "«multiselect» en lugar de los valores descriptivos."
6241
6242 #. type: TP
6243 #: debconf-devel.7:600
6244 #, no-wrap
6245 msgid "B<debconf-communicate>"
6246 msgstr "B<debconf-communicate>"
6247
6248 #. type: Plain text
6249 #: debconf-devel.7:606
6250 msgid ""
6251 "Another useful tool is the B<debconf-communicate>(1) program. Fire it up "
6252 "and you can speak the raw debconf protocol to debconf, interactively. This "
6253 "is a great way to try stuff out on the fly."
6254 msgstr ""
6255 "Otra herramienta útil es el programa B<debconf-communicate>(1). Inícielo y "
6256 "podrá comunicarse con debconf mediante el protocolo de debconf de forma "
6257 "interactiva. Es una buena forma de probar cosas inmediatamente."
6258
6259 #. type: TP
6260 #: debconf-devel.7:606
6261 #, no-wrap
6262 msgid "B<debconf-show>"
6263 msgstr "B<debconf-show>"
6264
6265 #. type: Plain text
6266 #: debconf-devel.7:612
6267 msgid ""
6268 "If a user is reporting a problem, B<debconf-show>(1) can be used to dump "
6269 "out all the questions owned by your package, displaying their values and "
6270 "whether the user has seen them."
6271 msgstr ""
6272 "Si un usuario informa de un problema puede usar B<debconf-show>(1) para "
6273 "mostrar todas las preguntas del que su paquete es propietario, mostrando sus "
6274 "valores y si el usuario las ha visto."
6275
6276 #. type: TP
6277 #: debconf-devel.7:612
6278 #, no-wrap
6279 msgid "B<.debconfrc>"
6280 msgstr "B<.debconfrc>"
6281
6282 #. type: Plain text
6283 #: debconf-devel.7:623
6284 msgid ""
6285 "To avoid the often tedious build/install/debug cycle, it can be useful to "
6286 "load up your templates with B<debconf-loadtemplate>(1) and run your config "
6287 "script by hand with the B<debconf>(1) command. However, you still have to "
6288 "do that as root, right? Not so good. And ideally you'd like to be able to "
6289 "see what a fresh installation of your package looks like, with a clean "
6290 "debconf database."
6291 msgstr ""
6292 "Para evitar el ciclo, a menudo tedioso, de construir, instalar y depurar, "
6293 "puede ser útil cargar sus plantillas con B<debconf-loadtemplate>(1) y "
6294 "ejecutar su script «config» directamente con la orden B<debconf>(1). Sin "
6295 "embargo, tiene que hacer esto como el usuario «root», ¿no?. No es muy bueno. "
6296 "Y lo ideal es que pueda ver el comportamiento de una instalación nueva de su "
6297 "paquete, con una base de datos de debconf limpia."
6298
6299 #. type: Plain text
6300 #: debconf-devel.7:629
6301 msgid ""
6302 "It turns out that if you set up a ~/.debconfrc file for a normal user, "
6303 "pointing at a personal config.dat and template.dat for the user, you can "
6304 "load up templates and run config scripts all you like, without any root "
6305 "access. If you want to start over with a clean database, just blow away the "
6306 "*.dat files."
6307 msgstr ""
6308 "Resulta que si configura un fichero «~/.debconfrc» para un usuario normal "
6309 "que apunta a unos ficheros «config.dat» y «template.dat» para el usuario, "
6310 "puede cargar plantillas y ejecutar scripts «config» cuanto desee sin "
6311 "permisos del usuario «root». Si desea iniciar todo con una base de datos "
6312 "limpia, simplemente borre los ficheros «*.dat»."
6313
6314 #. type: Plain text
6315 #: debconf-devel.7:634
6316 msgid ""
6317 "For details about setting this up, see B<debconf.conf>(5)B<,> and note that /"
6318 "etc/debconf.conf makes a good template for a personal ~/.debconfrc file."
6319 msgstr ""
6320 "Para detalles acerca de la configuración, consulte B<debconf.conf>(5)B<,> y "
6321 "tenga en cuenta que «/etc/debconf.conf» es una buena plantilla para un "
6322 "fichero «~/.debconfrc» personal."
6323
6324 #. type: SH
6325 #: debconf-devel.7:635
6326 #, no-wrap
6327 msgid "ADVANCED PROGRAMMING WITH DEBCONF"
6328 msgstr "PROGRAMACIÓN AVANZADA CON DEBCONF"
6329
6330 #. type: SS
6331 #: debconf-devel.7:636
6332 #, no-wrap
6333 msgid "Config file handling"
6334 msgstr "Manipulación de ficheros de configuración"
6335
6336 #. type: Plain text
6337 #: debconf-devel.7:643
6338 msgid ""
6339 "Many of you seem to want to use debconf to help manage config files that are "
6340 "part of your package. Perhaps there is no good default to ship in a "
6341 "conffile, and so you want to use debconf to prompt the user, and write out a "
6342 "config file based on their answers. That seems easy enough to do, but then "
6343 "you consider upgrades, and what to do when someone modifies the config file "
6344 "you generate, and dpkg-reconfigure, and ..."
6345 msgstr ""
6346 "Parece que muchos de vosotros queréis usar debconf para ayudar en la "
6347 "manipulación de los ficheros de configuración que son parte de su paquete. "
6348 "Puede que no exista un buen valor predefinido a incluir en un fichero de "
6349 "configuración, y por ello puede desear usar debconf para plantear preguntas "
6350 "al usuario y escribir un fichero de configuración en base a las respuestas. "
6351 "Puede parecer fácil, pero considere las actualizaciones, y qué hacer cuando "
6352 "alguien modifica el fichero de configuración que su paquete genera, cuando "
6353 "se usa dpkg-reconfigure, y más..."
6354
6355 #. type: Plain text
6356 #: debconf-devel.7:651
6357 msgid ""
6358 "There are a lot of ways to do this, and most of them are wrong, and will "
6359 "often earn you annoyed bug reports. Here is one right way to do it. It "
6360 "assumes that your config file is really just a series of shell variables "
6361 "being set, with comments in between, and so you can just source the file to "
6362 "\"load\" it. If you have a more complicated format, reading (and writing) "
6363 "it becomes a bit trickier."
6364 msgstr ""
6365 "Existen varias formas de hacer esto, y la mayoría están equivocadas, "
6366 "generando a menudo molestos informes de fallo. Aquí tiene una de las formas "
6367 "correctas de hacerlo. Asume que su fichero de configuración es realmente "
6368 "sólo una serie de variables de entorno a definir («set»), con comentarios "
6369 "entre ellos, para que así pueda sólo leer el fichero para cargarlo. Si tiene "
6370 "un formato más complicado, leer y editar el fichero es más complicado."
6371
6372 #. type: Plain text
6373 #: debconf-devel.7:653
6374 msgid "Your config script will look something like this:"
6375 msgstr "Su script «config» puede tener un aspecto similar a este:"
6376
6377 #. type: Plain text
6378 #: debconf-devel.7:658 debconf-devel.7:680
6379 #, no-wrap
6380 msgid ""
6381 " #!/bin/sh\n"
6382 " CONFIGFILE=/etc/foo.conf\n"
6383 " set -e\n"
6384 " . /usr/share/debconf/confmodule\n"
6385 msgstr ""
6386 " #!/bin/sh\n"
6387 " CONFIGFILE=/etc/foo.conf\n"
6388 " set -e\n"
6389 " . /usr/share/debconf/confmodule\n"
6390
6391 #. type: Plain text
6392 #: debconf-devel.7:662
6393 #, no-wrap
6394 msgid ""
6395 " # Load config file, if it exists.\n"
6396 " if [ -e $CONFIGFILE ]; then\n"
6397 " \t. $CONFIGFILE || true\n"
6398 msgstr ""
6399 " # Carga el fichero de configuración, si existe.\n"
6400 " if [ -e $CONFIGFILE ]; then\n"
6401 " \t. $CONFIGFILE || true\n"
6402
6403 #. type: Plain text
6404 #: debconf-devel.7:668
6405 #, no-wrap
6406 msgid ""
6407 " \t# Store values from config file into\n"
6408 " \t# debconf db.\n"
6409 " \tdb_set mypackage/foo \"$FOO\"\n"
6410 " \tdb_set mypackage/bar \"$BAR\"\n"
6411 " fi\n"
6412 msgstr ""
6413 " \t# Guarda los valores del fichero de\n"
6414 " \t# configuración en la base de datos de debconf.\n"
6415 " \tdb_set mypackage/foo \"$FOO\"\n"
6416 " \tdb_set mypackage/bar \"$BAR\"\n"
6417 " fi\n"
6418
6419 #. type: Plain text
6420 #: debconf-devel.7:673
6421 #, no-wrap
6422 msgid ""
6423 " # Ask questions.\n"
6424 " db_input medium mypackage/foo || true\n"
6425 " db_input medium mypackage/bar || true\n"
6426 " db_go || true\n"
6427 msgstr ""
6428 " # Plantea preguntas.\n"
6429 " db_input medium mypackage/foo || true\n"
6430 " db_input medium mypackage/bar || true\n"
6431 " db_go || true\n"
6432
6433 #. type: Plain text
6434 #: debconf-devel.7:675
6435 msgid "And the postinst will look something like this:"
6436 msgstr "Y el script «postinst» tendrá un aspecto similar al siguiente:"
6437
6438 #. type: Plain text
6439 #: debconf-devel.7:689
6440 #, no-wrap
6441 msgid ""
6442 " # Generate config file, if it doesn't exist.\n"
6443 " # An alternative is to copy in a template\n"
6444 " # file from elsewhere.\n"
6445 " if [ ! -e $CONFIGFILE ]; then\n"
6446 " \techo \"# Config file for my package\" E<gt> $CONFIGFILE\n"
6447 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6448 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6449 " fi\n"
6450 msgstr ""
6451 " # Genera el fichero de configuración, si no existe.\n"
6452 " # Una alternativa es copiar un fichero\n"
6453 " # de plantillas en otra ubicación.\n"
6454 "¡ if [ ! -e $CONFIGFILE ]; then\n"
6455 " \techo \"# Fichero de configuración para mi paquete \" E<gt> $CONFIGFILE\n"
6456 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6457 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6458 " fi\n"
6459
6460 #. type: Plain text
6461 #: debconf-devel.7:699
6462 #, no-wrap
6463 msgid ""
6464 " # Substitute in the values from the debconf db.\n"
6465 " # There are obvious optimizations possible here.\n"
6466 " # The cp before the sed ensures we do not mess up\n"
6467 " # the config file's ownership and permissions.\n"
6468 " db_get mypackage/foo\n"
6469 " FOO=\"$RET\"\n"
6470 " db_get mypackage/bar\n"
6471 " BAR=\"$RET\"\n"
6472 " cp -a -f $CONFIGFILE $CONFIGFILE.tmp\n"
6473 msgstr ""
6474 " # Sustituye los valores de la base de datos de debconf\n"
6475 " # Aquí hay muchas optimizaciones posibles.\n"
6476 " # «cp» antes de «sed» asegura que no nos equivocamos\n"
6477 " # con el propietario y permisos del fichero de configuración.\n"
6478 " db_get mypackage/foo\n"
6479 " FOO=\"$RET\"\n"
6480 " db_get mypackage/bar\n"
6481 " BAR=\"$RET\"\n"
6482 " cp -a -f $CONFIGFILE $CONFIGFILE.tmp\n"
6483
6484 #. type: Plain text
6485 #: debconf-devel.7:706
6486 #, no-wrap
6487 msgid ""
6488 " # If the admin deleted or commented some variables but then set\n"
6489 " # them via debconf, (re-)add them to the conffile.\n"
6490 " test -z \"$FOO\" || grep -Eq '^ *FOO=' $CONFIGFILE || \\e\n"
6491 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6492 " test -z \"$BAR\" || grep -Eq '^ *BAR=' $CONFIGFILE || \\e\n"
6493 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6494 msgstr ""
6495 " # Si el administrador eliminó algunas variables pero después las\n"
6496 " # define («set») mediante debconf, las (re)añade al fichero de\n"
6497 " # configuración.\n"
6498 " test -z \"$FOO\" || grep -Eq '^ *FOO=' $CONFIGFILE || \\e\n"
6499 " \techo \"FOO=\" E<gt>E<gt> $CONFIGFILE\n"
6500 " test -z \"$BAR\" || grep -Eq '^ *BAR=' $CONFIGFILE || \\e\n"
6501 " \techo \"BAR=\" E<gt>E<gt> $CONFIGFILE\n"
6502
6503 #. type: Plain text
6504 #: debconf-devel.7:711
6505 #, no-wrap
6506 msgid ""
6507 " sed -e \"s/^ *FOO=.*/FOO=\\e\"$FOO\\e\"/\" \\e\n"
6508 " -e \"s/^ *BAR=.*/BAR=\\e\"$BAR\\e\"/\" \\e\n"
6509 " E<lt> $CONFIGFILE E<gt> $CONFIGFILE.tmp\n"
6510 " mv -f $CONFIGFILE.tmp $CONFIGFILE\n"
6511 msgstr ""
6512 " sed -e \"s/^ *FOO=.*/FOO=\\e\"$FOO\\e\"/\" \\e\n"
6513 " -e \"s/^ *BAR=.*/BAR=\\e\"$BAR\\e\"/\" \\e\n"
6514 " E<lt> $CONFIGFILE E<gt> $CONFIGFILE.tmp\n"
6515 " mv -f $CONFIGFILE.tmp $CONFIGFILE\n"
6516
6517 #. type: Plain text
6518 #: debconf-devel.7:719
6519 msgid ""
6520 "Consider how these two scripts handle all the cases. On fresh installs the "
6521 "questions are asked by the config script, and a new config file generated by "
6522 "the postinst. On upgrades and reconfigures, the config file is read in, and "
6523 "the values in it are used to change the values in the debconf database, so "
6524 "the admin's manual changes are not lost. The questions are asked again (and "
6525 "may or may not be displayed). Then the postinst substitutes the values back "
6526 "into the config file, leaving the rest of it unchanged."
6527 msgstr ""
6528 "Considere como estos dos scripts gestionan todas las situaciones. Las "
6529 "preguntas se realizan por el script «config» durante una instalación nueva, "
6530 "y «postinst» genera un nuevo fichero de configuración. Este fichero se lee "
6531 "durante una actualización y reconfiguración, y los valores contenidos en él "
6532 "se usan para modificar los valores en la base de datos de debconf, de forma "
6533 "que no se pierden los cambios manuales del administrador. Las preguntas se "
6534 "plantean otra vez (y puede o no que se muestren). Por último, el script "
6535 "«postinst» sustituye los valores en el fichero de configuración, sin "
6536 "modificar el resto del contenido."
6537
6538 #. type: SS
6539 #: debconf-devel.7:719
6540 #, no-wrap
6541 msgid "Letting the user back up"
6542 msgstr "Permitir retroceder al usuario"
6543
6544 #. type: Plain text
6545 #: debconf-devel.7:725
6546 msgid ""
6547 "Few things are more frustrating when using a system like debconf than being "
6548 "asked a question, and answering it, then moving on to another screen with a "
6549 "new question on it, and realizing that hey, you made a mistake, with that "
6550 "last question, and you want to go back to it, and discovering that you can't."
6551 msgstr ""
6552 "Pocas cosas son tan frustrantes al usar un sistema como debconf que "
6553 "responder a una pregunta, continuar a la siguiente pantalla con una pregunta "
6554 "nueva, descubrir que hizo una mala elección en la pregunta anterior, querer "
6555 "retroceder y descubrir que no puede."
6556
6557 #. type: Plain text
6558 #: debconf-devel.7:731
6559 msgid ""
6560 "Since debconf is driven by your config script, it can't jump back to a "
6561 "previous question on its own but with a little help from you, it can "
6562 "accomplish this feat. The first step is to make your config script let "
6563 "debconf know it is capable of handling the user pressing a back button. You "
6564 "use the CAPB command to do this, passing backup as a parameter."
6565 msgstr ""
6566 "Ya que el script «config» regula el comportamiento de debconf, este no puede "
6567 "saltar a una pregunta anterior por si mismo, aunque puede realizar este paso "
6568 "con un poco de su ayuda. El primer paso es permitir que el script «config» "
6569 "sepa que debconf permite que el usuario pulse un botón para retroceder. Para "
6570 "ello, use la orden «CAPB», introduciendo «backup» como parámetro."
6571
6572 #. type: Plain text
6573 #: debconf-devel.7:735
6574 msgid ""
6575 "Then after each GO command, you must test to see if the user asked to back "
6576 "up (debconf returns a code of 30), and if so jump back to the previous "
6577 "question."
6578 msgstr ""
6579 "A continuación, después de cada orden «GO», debe comprobar si el usuario "
6580 "pidió retroceder (debconf devuelve un código de 30), y si es así, debe "
6581 "saltar a la pregunta anterior."
6582
6583 #. type: Plain text
6584 #: debconf-devel.7:741
6585 msgid ""
6586 "There are several ways to write the control structures of your program so it "
6587 "can jump back to previous questions when necessary. You can write goto-laden "
6588 "spaghetti code. Or you can create several functions and use recursion. But "
6589 "perhaps the cleanest and easiest way is to construct a state machine. Here "
6590 "is a skeleton of a state machine that you can fill out and expand."
6591 msgstr ""
6592 "Existen varias formas de escribir las estructuras de control de su programa "
6593 "para que pueda retroceder a preguntas anteriores cuando sea necesario. Puede "
6594 "escribir un código complicado y confuso. O puede crear varias funciones y "
6595 "usar recursión. Pero quizás la forma más sencilla y limpia es crear una "
6596 "máquina de estado. Aquí tiene un boceto de una máquina de estado, que puede "
6597 "rellenar y expandir."
6598
6599 #. type: Plain text
6600 #: debconf-devel.7:746
6601 #, no-wrap
6602 msgid ""
6603 " #!/bin/sh\n"
6604 " set -e\n"
6605 " . /usr/share/debconf/confmodule\n"
6606 " db_capb backup\n"
6607 msgstr ""
6608 " #!/bin/sh\n"
6609 " set -e\n"
6610 " . /usr/share/debconf/confmodule\n"
6611 " db_capb backup\n"
6612
6613 #. type: Plain text
6614 #: debconf-devel.7:773
6615 #, no-wrap
6616 msgid ""
6617 " STATE=1\n"
6618 " while true; do\n"
6619 " \tcase \"$STATE\" in\n"
6620 " \t1)\n"
6621 " \t\t# Two unrelated questions.\n"
6622 " \t\tdb_input medium my/question || true\n"
6623 " \t\tdb_input medium my/other_question || true\n"
6624 " \t;;\n"
6625 " \t2)\n"
6626 " \t\t# Only ask this question if the\n"
6627 " \t\t# first question was answered in\n"
6628 " \t\t# the affirmative.\n"
6629 " \tdb_get my/question\n"
6630 " \t\tif [ \"$RET\" = \"true\" ]; then\n"
6631 " \t\t\tdb_input medium my/dep_question || true\n"
6632 " \t\tfi\n"
6633 " \t;;\n"
6634 " \t*)\n"
6635 " \t\t# The default case catches when $STATE is greater than the\n"
6636 " \t\t# last implemented state, and breaks out of the loop. This\n"
6637 " \t\t# requires that states be numbered consecutively from 1\n"
6638 " \t\t# with no gaps, as the default case will also be entered\n"
6639 " \t\t# if there is a break in the numbering\n"
6640 " \t\tbreak # exits the enclosing \"while\" loop\n"
6641 " \t;;\n"
6642 " \tesac\n"
6643 msgstr ""
6644 " STATE=1\n"
6645 " while true; do\n"
6646 " \tcase \"$STATE\" in\n"
6647 " \t1)\n"
6648 " \t\t# Dos preguntas no relacionadas.\n"
6649 " \t\tdb_input medium my/question || true\n"
6650 " \t\tdb_input medium my/other_question || true\n"
6651 " \t;;\n"
6652 " \t2)\n"
6653 " \t\t# Realiza esta pregunta sólo si\n"
6654 " \t\t# se respondió afirmativamente\n"
6655 " \t\t# a la primera.\n"
6656 " \tdb_get my/question\n"
6657 " \t\tif [ \"$RET\" = \"true\" ]; then\n"
6658 " \t\t\tdb_input medium my/dep_question || true\n"
6659 " \t\tfi\n"
6660 " \t;;\n"
6661 " \t*)\n"
6662 " \t\t# El caso («case») predefinido se inicia cuando $STATE es\n"
6663 " \t\t# mayor que el último «state» implementado, abandonando el bucle.\n"
6664 " \t\t# Es necesario numerar los «states» consecutivamente desde el 1\n"
6665 " \t\t# sin espacios, ya que el «case» predefinido también se introducirá\n"
6666 " \t\t# si hay un espacio en la numeración.\n"
6667 " \t\tbreak # exits the enclosing \"while\" loop\n"
6668 " \t;;\n"
6669 " \tesac\n"
6670
6671 #. type: Plain text
6672 #: debconf-devel.7:780
6673 #, no-wrap
6674 msgid ""
6675 " \tif db_go; then\n"
6676 " \t\tSTATE=$((STATE + 1))\n"
6677 " \telse\n"
6678 " \t\tSTATE=$((STATE - 1))\n"
6679 " \tfi\n"
6680 " done\n"
6681 msgstr ""
6682 " \tif db_go; then\n"
6683 " \t\tSTATE=$((STATE + 1))\n"
6684 " \telse\n"
6685 " \t\tSTATE=$((STATE - 1))\n"
6686 " \tfi\n"
6687 " done\n"
6688
6689 #. type: Plain text
6690 #: debconf-devel.7:791
6691 #, no-wrap
6692 msgid ""
6693 " if [ $STATE -eq 0 ]; then\n"
6694 " \t# The user has asked to back up from the first\n"
6695 " \t# question. This case is problematical. Regular\n"
6696 " \t# dpkg and apt package installation isn't capable\n"
6697 " \t# of backing up questions between packages as this\n"
6698 " \t# is written, so this will exit leaving the package\n"
6699 " \t# unconfigured - probably the best way to handle\n"
6700 " \t# the situation.\n"
6701 " \texit 10\n"
6702 " fi\n"
6703 msgstr ""
6704 " if [ $STATE -eq 0 ]; then\n"
6705 " \t# El usuario pidió volver atrás a la primera\n"
6706 " \t# pregunta. Este caso es problemático. La\n"
6707 " \t# instalación regular de dpkg y apt no es capaz de\n"
6708 " \t# retroceder a preguntas entre paquetes tal y como\n"
6709 " \t# esto se escribe, así que esto cerraría dejando el\n"
6710 " \t# paquete sin configurar - probablemente la mejor\n"
6711 " \t# forma de tratar esta situación.\n"
6712 " \texit 10\n"
6713 " fi\n"
6714
6715 #. type: Plain text
6716 #: debconf-devel.7:796
6717 msgid ""
6718 "Note that if all your config script does is ask a few unrelated questions, "
6719 "then there is no need for the state machine. Just ask them all, and GO; "
6720 "debconf will do its best to present them all in one screen, and the user "
6721 "won't need to back up."
6722 msgstr ""
6723 "Tenga en cuenta que si todo lo que hace su script «config» es plantear unas "
6724 "pocas preguntas sin relación, no hay necesidad de una máquina de estado. "
6725 "Sólo plantee las preguntas, y «GO»; debconf lo hará lo mejor que pueda para "
6726 "mostrar todas en la misma pantalla, y así el usuario no tendrá que "
6727 "retroceder."
6728
6729 #. type: SS
6730 #: debconf-devel.7:796
6731 #, no-wrap
6732 msgid "Preventing infinite loops"
6733 msgstr "Evitar bucles infinitos"
6734
6735 #. type: Plain text
6736 #: debconf-devel.7:800
6737 msgid ""
6738 "One gotcha with debconf comes up if you have a loop in your config script. "
6739 "Suppose you're asking for input and validating it, and looping if it's not "
6740 "valid:"
6741 msgstr ""
6742 "Debconf puede encontrar problemas si su script «config» contiene un bucle. "
6743 "Suponga que su consulta requiere la entrada de datos y su validación, y su "
6744 "repetición en caso de que no sea válida:"
6745
6746 #. type: Plain text
6747 #: debconf-devel.7:810
6748 #, no-wrap
6749 msgid ""
6750 " ok=''\n"
6751 " do while [ ! \"$ok\" ];\n"
6752 " \tdb_input low foo/bar || true\n"
6753 " \tdb_go || true\n"
6754 " \tdb_get foo/bar\n"
6755 " \tif [ \"$RET\" ]; then\n"
6756 " \t\tok=1\n"
6757 " \tfi\n"
6758 " done\n"
6759 msgstr ""
6760 " ok=''\n"
6761 " do while [ ! \"$ok\" ];\n"
6762 " \tdb_input low foo/bar || true\n"
6763 " \tdb_go || true\n"
6764 " \tdb_get foo/bar\n"
6765 " \tif [ \"$RET\" ]; then\n"
6766 " \t\tok=1\n"
6767 " \tfi\n"
6768 " done\n"
6769
6770 #. type: Plain text
6771 #: debconf-devel.7:817
6772 msgid ""
6773 "This looks ok at first glance. But consider what happens if the value of foo/"
6774 "bar is \"\" when this loop is entered, and the user has their priority set "
6775 "high, or is using a non-interactive frontend, and so they are not really "
6776 "asked for input. The value of foo/bar is not changed by the db_input, and so "
6777 "it fails the test and loops. And loops ..."
6778 msgstr ""
6779 "Superficialmente, esto es correcto. Pero considere qué ocurre si el valor de "
6780 "«foo/bar» es «\"\"» al entrar en este bucle, y si el usuario ha definido la "
6781 "prioridad de las preguntas a mostrar como alta, o si usa una interfaz no "
6782 "interactiva, de forma que en realidad no se pide ninguna entrada. El valor "
6783 "de «foo/bar» no se modifica mediante «db_input», fallando la prueba de "
6784 "validación y realizando el bucle una y otra vez..."
6785
6786 #. type: Plain text
6787 #: debconf-devel.7:823
6788 msgid ""
6789 "One fix for this is to make sure that before the loop is entered, the value "
6790 "of foo/bar is set to something that will pass the test in the loop. So for "
6791 "example if the default value of foo/bar is \"1\", then you could RESET foo/"
6792 "bar just before entering the loop."
6793 msgstr ""
6794 "Una forma de evitar esto es que antes de entrar en el bucle, el valor de "
6795 "«foo/bar» esté definido como algo que superaría la prueba en el bucle. Por "
6796 "ejemplo, si el valor predefinido de «foo/bar» es \"1\", entonces puede "
6797 "reiniciar («RESET») «foo/bar» antes de entrar en el bucle."
6798
6799 #. type: Plain text
6800 #: debconf-devel.7:827
6801 msgid ""
6802 "Another fix is to check the return code of the INPUT command. If it is 30 "
6803 "then the user is not being shown the question you asked them, and you should "
6804 "break out of the loop."
6805 msgstr ""
6806 "Otra forma es comprobar el código de retorno de la orden «INPUT». Si es 30, "
6807 "el usuario no ve la pregunta que se les plantea, y debería salir del bucle."
6808
6809 #. type: SS
6810 #: debconf-devel.7:827
6811 #, no-wrap
6812 msgid "Choosing among related packages"
6813 msgstr "Escoger entre paquetes relacionados"
6814
6815 #. type: Plain text
6816 #: debconf-devel.7:832
6817 msgid ""
6818 "Sometimes a set of related packages can be installed, and you want to prompt "
6819 "the user which of the set should be used by default. Examples of such sets "
6820 "are window managers, or ispell dictionary files."
6821 msgstr ""
6822 "A veces se pueden instalar un conjunto de paquetes relacionados, y desea "
6823 "consultar al usuario qué conjunto se debería usar por omisión. Ejemplos de "
6824 "tales conjuntos son gestores de ventanas o ficheros de diccionario ispell."
6825
6826 #. type: Plain text
6827 #: debconf-devel.7:838
6828 msgid ""
6829 "While it would be possible for each package in the set to simply prompt, "
6830 "\"Should this package be default?\", this leads to a lot of repetitive "
6831 "questions if several of the packages are installed. It's possible with "
6832 "debconf to present a list of all the packages in the set and allow the user "
6833 "to choose between them. Here's how."
6834 msgstr ""
6835 "Aunque sea posible que cada paquete en el conjunto podría simplemente "
6836 "consultar «¿Debería ser este paquete el predefinido?», conllevaría a muchas "
6837 "preguntas repetitivas si se van a instalar varios paquetes. Debconf permite "
6838 "la presentación de una lista de todos los paquetes del conjunto, permitiendo "
6839 "al usuario seleccionar cuáles desea. Aquí tiene como hacerlo."
6840
6841 #. type: Plain text
6842 #: debconf-devel.7:841
6843 msgid ""
6844 "Make all the packages in the set use a shared template. Something like this:"
6845 msgstr ""
6846 "Haga que todos los paquetes en el conjunto usen una plantilla compartida "
6847 "(tipo «shared»). Algo como esto:"
6848
6849 #. type: Plain text
6850 #: debconf-devel.7:848
6851 #, no-wrap
6852 msgid ""
6853 " Template: shared/window-manager\n"
6854 " Type: select\n"
6855 " Choices: ${choices}\n"
6856 " Description: Select the default window manager.\n"
6857 " Select the window manager that will be started by\n"
6858 " default when X starts.\n"
6859 msgstr ""
6860 " Template: shared/window-manager\n"
6861 " Type: select\n"
6862 " Choices: ${choices}\n"
6863 " Description: Select the default window manager.\n"
6864 " Select the window manager that will be started by\n"
6865 " default when X starts.\n"
6866
6867 #. type: Plain text
6868 #: debconf-devel.7:851
6869 msgid ""
6870 "Each package should include a copy of the template. Then it should include "
6871 "some code like this in its config script:"
6872 msgstr ""
6873 "Cada paquete debería incluir una copia de esta plantilla. También debería "
6874 "incluir código parecido al siguiente en su script «config»:"
6875
6876 #. type: Plain text
6877 #: debconf-devel.7:856
6878 #, no-wrap
6879 msgid ""
6880 " db_metaget shared/window-manager owners\n"
6881 " OWNERS=$RET\n"
6882 " db_metaget shared/window-manager choices\n"
6883 " CHOICES=$RET\n"
6884 msgstr ""
6885 " db_metaget shared/window-manager owners\n"
6886 " OWNERS=$RET\n"
6887 " db_metaget shared/window-manager choices\n"
6888 " CHOICES=$RET\n"
6889
6890 #. type: Plain text
6891 #: debconf-devel.7:861
6892 #, no-wrap
6893 msgid ""
6894 " if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
6895 " \tdb_subst shared/window-manager choices $OWNERS\n"
6896 " \tdb_fset shared/window-manager seen false\n"
6897 " fi\n"
6898 msgstr ""
6899 " if [ \"$OWNERS\" != \"$CHOICES\" ]; then\n"
6900 " \tdb_subst shared/window-manager choices $OWNERS\n"
6901 " \tdb_fset shared/window-manager seen false\n"
6902 " fi\n"
6903
6904 #. type: Plain text
6905 #: debconf-devel.7:864
6906 #, no-wrap
6907 msgid ""
6908 " db_input medium shared/window-manager || true\n"
6909 " db_go || true\n"
6910 msgstr ""
6911 " db_input medium shared/window-manager || true\n"
6912 " db_go || true\n"
6913
6914 #. type: Plain text
6915 #: debconf-devel.7:872
6916 msgid ""
6917 "A bit of an explanation is called for. By the time your config script runs, "
6918 "debconf has already read in all the templates for the packages that are "
6919 "being installed. Since the set of packages share a question, debconf records "
6920 "that fact in the owners field. By a strange coincidence, the format of the "
6921 "owners field is the same as that of the choices field (a comma and space "
6922 "delimited list of values)."
6923 msgstr ""
6924 "Esto requiere una explicación. Llegado el momento de ejecutar su script "
6925 "«config», debconf ya ha analizado todas las plantillas de los paquetes que "
6926 "se van a instalar. Ya que el conjunto de paquetes comparten una pregunta, "
6927 "debconf registra este hecho en el campo «owners» (propietarios). Por una "
6928 "extraña coincidencia, el formato del campo «owners» es el mismo que el del "
6929 "campo «choices» (elecciones), una lista de valores separados por comas y "
6930 "espacios."
6931
6932 #. type: Plain text
6933 #: debconf-devel.7:877
6934 msgid ""
6935 "The METAGET command can be used to get the list of owners and the list of "
6936 "choices. If they are different, then a new package has been installed. So "
6937 "use the SUBST command to change the list of choices to be the same as the "
6938 "list of owners, and ask the question."
6939 msgstr ""
6940 "La orden «METAGET» se puede usar para obtener una lista de los propietarios "
6941 "y de las elecciones. Si son diferentes, se ha instalado un paquete nuevo. "
6942 "Use la orden «SUBST» para cambiar la lista de elecciones para que sea igual "
6943 "a la lista de propietarios, y plantee la pregunta."
6944
6945 #. type: Plain text
6946 #: debconf-devel.7:881
6947 msgid ""
6948 "When a package is removed, you probably want to see if that package is the "
6949 "currently selected choice, and if so, prompt the user to select a different "
6950 "package to replace it."
6951 msgstr ""
6952 "Cuando se elimine un paquete probablemente querrá ver si ese paquete es la "
6953 "elección actualmente seleccionada, y si es así, querrá consultar al usuario "
6954 "para que seleccione un paquete diferente para reemplazarlo."
6955
6956 #. type: Plain text
6957 #: debconf-devel.7:885
6958 msgid ""
6959 "This can be accomplished by adding something like this to the prerm scripts "
6960 "of all related packages (replacing E<lt>packageE<gt> with the package name):"
6961 msgstr ""
6962 "Esto se puede lograr añadiendo algo similar a lo siguiente en los scripts "
6963 "«prerm» de todos los paquetes relacionados (reemplazando E<lt>paqueteE<gt> "
6964 "con el nombre del paquete)."
6965
6966 #. type: Plain text
6967 #: debconf-devel.7:890
6968 #, no-wrap
6969 msgid ""
6970 " if [ -e /usr/share/debconf/confmodule ]; then\n"
6971 " \t. /usr/share/debconf/confmodule\n"
6972 " \t# I no longer claim this question.\n"
6973 " \tdb_unregister shared/window-manager\n"
6974 msgstr ""
6975 " if [ -e /usr/share/debconf/confmodule ]; then\n"
6976 " \t. /usr/share/debconf/confmodule\n"
6977 " \t# No declara propiedad sobre esta pregunta.\n"
6978 " \tdb_unregister shared/window-manager\n"
6979
6980 #. type: Plain text
6981 #: debconf-devel.7:901
6982 #, no-wrap
6983 msgid ""
6984 " \t# See if the shared question still exists.\n"
6985 " \tif db_get shared/window-manager; then\n"
6986 " \t\tdb_metaget shared/window-manager owners\n"
6987 " \t\tdb_subst shared/window-manager choices $RET\n"
6988 " \t\tdb_metaget shared/window-manager value\n"
6989 " \t\tif [ \"E<lt>packageE<gt>\" = \"$RET\" ] ; then\n"
6990 " \t\t\tdb_fset shared/window-manager seen false\n"
6991 " \t\t\tdb_input high shared/window-manager || true\n"
6992 " \t\t\tdb_go || true\n"
6993 " \t\tfi\n"
6994 msgstr ""
6995 " \t# Comprueba que la pregunta compartida aún existe.\n"
6996 " \tif db_get shared/window-manager; then\n"
6997 " \t\tdb_metaget shared/window-manager owners\n"
6998 " \t\tdb_subst shared/window-manager choices $RET\n"
6999 " \t\tdb_metaget shared/window-manager value\n"
7000 " \t\tif [ \"E<lt>paqueteE<gt>\" = \"$RET\" ] ; then\n"
7001 " \t\t\tdb_fset shared/window-manager seen false\n"
7002 " \t\t\tdb_input high shared/window-manager || true\n"
7003 " \t\t\tdb_go || true\n"
7004 " \t\tfi\n"
7005
7006 #. type: Plain text
7007 #: debconf-devel.7:906
7008 #, no-wrap
7009 msgid ""
7010 " \t\t# Now do whatever the postinst script did\n"
7011 " \t\t# to update the window manager symlink.\n"
7012 " \tfi\n"
7013 " fi\n"
7014 msgstr ""
7015 " \t\t# Ahora haga lo que el script «postinst» hizo\n"
7016 " \t\t# para actualizar el enlace simbólico del gestor\n"
7017 " \t\t# de ventanas.\n"
7018 " \tfi\n"
7019 " fi\n"
7020
7021 #. type: SH
7022 #: debconf-devel.7:906
7023 #, no-wrap
7024 msgid "HACKS"
7025 msgstr "ARREGLOS"
7026
7027 #. type: Plain text
7028 #: debconf-devel.7:909
7029 msgid ""
7030 "Debconf is currently not fully integrated into dpkg (but I want to change "
7031 "this in the future), and so some messy hacks are currently called for."
7032 msgstr ""
7033 "A día de hoy debconf no está completamente integrado en dpkg (pero quiero "
7034 "cambiar esto en el futuro), y por ello actualmente se usan unos arreglos "
7035 "poco elegantes."
7036
7037 #. type: Plain text
7038 #: debconf-devel.7:920
7039 msgid ""
7040 "The worst of these involves getting the config script to run. The way that "
7041 "works now is the config script will be run when the package is pre-"
7042 "configured. Then, when the postinst script runs, it starts up debconf again. "
7043 "Debconf notices it is being used by the postinst script, and so it goes off "
7044 "and runs the config script. This can only work if your postinst loads up one "
7045 "of the debconf libraries though, so postinsts always have to take care to do "
7046 "that. We hope to address this later by adding explicit support to dpkg for "
7047 "debconf. The B<debconf>(1) program is a step in this direction."
7048 msgstr ""
7049 "El peor de estos arreglos implica ejecutar el script «config». La forma en "
7050 "la que funciona ahora es ejecutar el script «config» al preconfigurar el "
7051 "paquete. Entonces, al ejecutar el script «postinst», inicia debconf otra "
7052 "vez. Debconf detecta que está en uso mediante el script «postinst», y por "
7053 "ello se desactiva y ejecuta el script «config». Sólo funciona si su script "
7054 "«postinst» carga una de las bibliotecas debconf por lo que todos los scripts "
7055 "«postinst» deben encargarse de ello. Esperamos cambiar esto en el futuro "
7056 "añadiendo la compatibilidad explicita para debconf a dpkg. El programa "
7057 "B<debconf>(1) es un paso en esta dirección."
7058
7059 #. type: Plain text
7060 #: debconf-devel.7:931
7061 msgid ""
7062 "A related hack is getting debconf running when a config script, postinst, or "
7063 "other program that uses it starts up. After all, they expect to be able to "
7064 "talk to debconf right away. The way this is accomplished for now is that "
7065 "when such a script loads a debconf library (like /usr/share/debconf/"
7066 "confmodule), and debconf is not already running, it is started up, and a new "
7067 "copy of the script is re-execed. The only noticeable result is that you need "
7068 "to put the line that loads a debconf library at the very top of the script, "
7069 "or weird things will happen. We hope to address this later by changing how "
7070 "debconf is invoked, and turning it into something more like a transient "
7071 "daemon."
7072 msgstr ""
7073 "Otro arreglo relacionado es ejecutar debconf cuando un script «config», "
7074 "«postinst» u otro programa que lo usa se inicia. Después de todo, esperan "
7075 "poder comunicarse con debconf inmediatamente. La forma de lograr esto "
7076 "actualmente es que cuando un script carga una biblioteca de debconf (como «/"
7077 "usr/share/debconf/confmodule»), y debconf no está en ejecución, éste se "
7078 "inicia, y se ejecuta una nueva copia del script. La única diferencia notable "
7079 "es que necesita ubicar la línea que carga la biblioteca de debconf al "
7080 "principio del script o pueden ocurrir comportamientos raros. Esperamos poder "
7081 "cambiar en el futuro la forma en que se invoca debconf, transformándolo en "
7082 "un especie de demonio transitorio."
7083
7084 #. type: Plain text
7085 #: debconf-devel.7:942
7086 msgid ""
7087 "It's rather hackish how debconf figures out what templates files to load, "
7088 "and when it loads them. When the config, preinst, and postinst scripts "
7089 "invoke debconf, it will automatically figure out where the templates file "
7090 "is, and load it. Standalone programs that use debconf will cause debconf to "
7091 "look for templates files in /usr/share/debconf/templates/progname."
7092 "templates. And if a postrm wants to use debconf at purge time, the "
7093 "templates won't be available unless debconf had a chance to load them in its "
7094 "postinst. This is messy, but rather unavoidable. In the future some of these "
7095 "programs may be able to use debconf-loadtemplate by hand though."
7096 msgstr ""
7097 "La forma en que debconf averigua qué ficheros de plantillas cargar y cuándo "
7098 "es también un arreglo poco elegante. Cuando los scripts «config», «preinst», "
7099 "y «postinst» invocan debconf, éste averiguará automáticamente dónde está el "
7100 "fichero de plantilla, y lo cargará. Los programas independientes que usan "
7101 "debconf provocarán que debconf busque ficheros de plantilla en «/usr/share/"
7102 "debconf/templates/progname.templates». Y si un «postrm» desea usar debconf "
7103 "al purgar, las plantillas no estarán disponibles a menos que debconf tenga "
7104 "la oportunidad de cargarlo a través de «postinst». Esto es algo confuso, "
7105 "pero inevitable. En el futuro, puede que algunos de estos programas sean "
7106 "capaces de usar debconf-loadtemplate directamente."
7107
7108 #. type: Plain text
7109 #: debconf-devel.7:950
7110 msgid ""
7111 "/usr/share/debconf/confmodule's historic behavior of playing with file "
7112 "descriptors and setting up a fd #3 that talks to debconf, can cause all "
7113 "sorts of trouble when a postinst runs a daemon, since the daemon ends up "
7114 "talking to debconf, and debconf can't figure out when the script terminates. "
7115 "The STOP command can work around this. In the future, we are considering "
7116 "making debconf communication happen over a socket or some other mechanism "
7117 "than stdio."
7118 msgstr ""
7119 "El comportamiento histórico de «/usr/share/debconf/confmodule» de manipular "
7120 "los descriptores de ficheros, configurando un descriptor de fichero 3 para "
7121 "comunicarse con debconf, puede causar varios tipos de problema cuando un "
7122 "«postinst» se comunica con debconf ya que el script finaliza la comunicación "
7123 "pero debconf no puede averiguar cuándo finaliza el script. Puede usar la "
7124 "orden «STOP» como un arreglo. En el futuro, estamos considerando hacer que "
7125 "la comunicación con debconf se realice a través de un «socket» o algún otro "
7126 "mecanismo además de la entrada y salida estándar."
7127
7128 #. type: Plain text
7129 #: debconf-devel.7:958
7130 msgid ""
7131 "Debconf sets DEBCONF_RECONFIGURE=1 before running postinst scripts, so a "
7132 "postinst script that needs to avoid some expensive operation when "
7133 "reconfigured can look at that variable. This is a hack because the right "
7134 "thing would be to pass $1 = \"reconfigure\", but doing so without breaking "
7135 "all the postinsts that use debconf is difficult. The migration plan away "
7136 "from this hack is to encourage people to write postinsts that accept "
7137 "\"reconfigure\", and once they all do, begin passing that parameter."
7138 msgstr ""
7139 "Debconf define «DEBCONF_RECONFIGURE=1» antes de ejecutar scripts «postinst», "
7140 "de forma que un script «postinst» que deba evitar alguna operación compleja "
7141 "al reconfigurarse puede examinar esa variable. Este es sólo un arreglo ya "
7142 "que lo correcto sería introducir «$1 = \"reconfigure\"», pero hacerlo sin "
7143 "romper todos los «postinst» que usan debconf es difícil. La vía para "
7144 "abandonar este arreglo es animar a la gente a que escriban ficheros "
7145 "«postinst» que acepten «reconfigure», y una vez que todos lo hagan, empezar "
7146 "a introducir ese parámetro."
7147
7148 #. type: Plain text
7149 #: debconf-devel.7:961
7150 msgid "B<debconf>(7) is the debconf user's guide."
7151 msgstr "B<debconf>(7) es la guía de usuario de debconf."
7152
7153 #. type: Plain text
7154 #: debconf-devel.7:964
7155 msgid ""
7156 "The debconf specification in debian policy is the canonical definition of "
7157 "the debconf protocol. /usr/share/doc/debian-policy/debconf_specification.txt."
7158 "gz"
7159 msgstr ""
7160 "La especificación de debconf en las normas de Debian (debian-policy) es la "
7161 "definición estándar del protocolo de debconf. Puede encontrarlo en«/usr/"
7162 "share/doc/debian-policy/debconf_specification.txt.gz»."
7163
7164 #. type: Plain text
7165 #: debconf-devel.7:968
7166 msgid ""
7167 "B<debconf.conf>(5) has much useful information, including some info about "
7168 "the backend database."
7169 msgstr ""
7170 "B<debconf.conf>(5) contiene mucha información útil, incluyendo algo de "
7171 "información acerca del sistema de la base de datos."
7172
7173 #, fuzzy
7174 #~| msgid ""
7175 #~| "This frontend provides a simple X GUI written with the Qt library. It "
7176 #~| "fits well the KDE desktop. You of course need a DISPLAY to use this "
7177 #~| "frontend and must install libqt-perl. The frontend will fall back to "
7178 #~| "dialog if some of the prerequisites are not met."
7179 #~ msgid ""
7180 #~ "This frontend provides a simple X GUI written with the Qt library. You of "
7181 #~ "course need a DISPLAY to use this frontend and must install libqtgui4-"
7182 #~ "perl. The frontend will fall back to dialog if some of the prerequisites "
7183 #~ "are not met."
7184 #~ msgstr ""
7185 #~ "Esta interfaz proporciona una sencilla interfaz de usuario para X creada "
7186 #~ "utilizando la biblioteca QT. Se integra bien en el entorno de escritorio "
7187 #~ "KDE. Por supuesto, necesita configurar «DISPLAY» para utilizar esta "
7188 #~ "interfaz, e instalar libqt-perl. Si no se cumplen todos los requisitos, "
7189 #~ "esta interfaz utilizará dialog de forma predefinida."
7190
7191 #~ msgid "B<-a>, B<--all>"
7192 #~ msgstr "B<-a>, B<--all>"
7193
7194 #~ msgid ""
7195 #~ "Reconfigure all installed packages that use debconf. Warning: this may "
7196 #~ "take a long time."
7197 #~ msgstr ""
7198 #~ "Reconfigura todos los paquetes instalados que usan debconf. Aviso: esto "
7199 #~ "puede llevar mucho tiempo."