# debconf doc/man/po4a/po translation to Spanish # Copyright (C) 2010, 2011 Software in the Public Interest # This file is distributed under the same license as the debconf package. # # Changes: # - Initial translation # Omar Campagne , 2010, 2011. # # - Updates # TRANSLATOR # # Traductores, si no conocen el formato PO, merece la pena leer la # documentación de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traducción al español, por favor lean antes de traducir # los siguientes documentos: # # - El proyecto de traducción de Debian al español # http://www.debian.org/intl/spanish/ # especialmente las notas y normas de traducción en # http://www.debian.org/intl/spanish/notas # # - La guía de traducción de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans # msgid "" msgstr "" "Project-Id-Version: debconf 1.5.41\n" "POT-Creation-Date: 2024-01-21 19:23+0000\n" "PO-Revision-Date: 2011-08-02 11:03+0200\n" "Last-Translator: Omar Campagne \n" "Language-Team: Debian l10n Spanish \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Virtaal 0.7.0\n" #. type: SH #: ../../debconf:3 ../../Debconf/Client/ConfModule.pm:3 #: ../../debconf-apt-progress:3 ../../debconf-escape:3 #: ../../debconf-communicate:3 ../../debconf-copydb:3 ../../debconf-getlang:3 #: ../../debconf-get-selections:3 ../../debconf-loadtemplate:3 #: ../../debconf-mergetemplate:3 ../../debconf-set-selections:3 #: ../../debconf-show:3 ../../dpkg-preconfigure:3 ../../dpkg-reconfigure:3 #: debconf.conf.5:2 confmodule.3:2 debconf.7:2 debconf-devel.7:2 #, no-wrap msgid "NAME" msgstr "NOMBRE" #. type: textblock #: ../../debconf:5 msgid "debconf - run a debconf-using program" msgstr "debconf - Ejecuta un programa que hace uso de debconf" #. type: SH #: ../../debconf:9 ../../Debconf/Client/ConfModule.pm:7 #: ../../debconf-apt-progress:7 ../../debconf-escape:7 #: ../../debconf-communicate:9 ../../debconf-copydb:17 ../../debconf-getlang:16 #: ../../debconf-get-selections:7 ../../debconf-loadtemplate:14 #: ../../debconf-mergetemplate:17 ../../debconf-set-selections:7 #: ../../debconf-show:7 ../../dpkg-preconfigure:7 ../../dpkg-reconfigure:7 #: debconf.conf.5:12 confmodule.3:4 #, no-wrap msgid "SYNOPSIS" msgstr "SINOPSIS" #. type: verbatim #: ../../debconf:11 #, no-wrap msgid "" " debconf [options] command [args]\n" "\n" msgstr "" " debconf [opciones] orden [argumentos]\n" "\n" #. type: SH #: ../../debconf:13 ../../Debconf/Client/ConfModule.pm:20 #: ../../debconf-apt-progress:15 ../../debconf-escape:12 #: ../../debconf-communicate:13 ../../debconf-copydb:30 #: ../../debconf-getlang:21 ../../debconf-get-selections:11 #: ../../debconf-loadtemplate:18 ../../debconf-mergetemplate:21 #: ../../debconf-set-selections:12 ../../debconf-show:13 #: ../../dpkg-preconfigure:13 ../../dpkg-reconfigure:11 debconf.conf.5:4 #: confmodule.3:12 debconf.7:4 debconf-devel.7:4 #, no-wrap msgid "DESCRIPTION" msgstr "DESCRIPCIÓN" #. type: textblock #: ../../debconf:15 msgid "" "Debconf is a configuration system for Debian packages. For a debconf " "overview and documentation for sysadmins, see L (in the debconf-" "doc package)." msgstr "" "Debconf es un sistema de configuración para paquetes de Debian. Consulte " "L (en el paquete debconf-doc) para una visión general de debconf " "y la documentación para administradores de sistemas." #. type: textblock #: ../../debconf:19 msgid "" "The B program runs a program under debconf's control, setting it up " "to talk with debconf on stdio. The program's output is expected to be " "debconf protocol commands, and it is expected to read result codes on stdin. " "See L for details about the debconf protocol." msgstr "" "El programa B ejecuta un programa bajo el control de debconf, " "haciendo que se comunique con debconf por la entrada y salida estándar. Se " "espera que la salida del programa sean órdenes del protocolo de debconf, y " "también que lea los códigos resultantes por la entrada estándar. Para más " "detalles acerca del protocolo de debconf consulte L." #. type: textblock #: ../../debconf:24 msgid "" "The command to be run under debconf must be specified in a way that will let " "your PATH find it." msgstr "" "La orden a ejecutar bajo debconf debe estar definida de manera que esté " "incluida dentro de la variable «PATH»." #. type: textblock #: ../../debconf:27 msgid "" "This command is not the usual way that debconf is used. It's more typical " "for debconf to be used via L or L." msgstr "" "Esta orden no es la forma habitual de uso de debconf. Es más habitual " "interactuar con debconf a través de L o L." #. type: =head1 #: ../../debconf:30 ../../debconf-apt-progress:43 ../../debconf-copydb:36 #: ../../debconf-mergetemplate:45 ../../debconf-set-selections:56 #: ../../debconf-show:24 ../../dpkg-preconfigure:20 ../../dpkg-reconfigure:21 msgid "OPTIONS" msgstr "OPCIONES" #. type: =item #: ../../debconf:34 msgid "B<-o>I, B<--owner=>I" msgstr "B<-o>I, B<--owner=>I" #. type: textblock #: ../../debconf:36 msgid "" "Tell debconf what package the command it is running is a part of. This is " "necessary to get ownership of registered questions right, and to support " "unregister and purge commands properly." msgstr "" "Informa a debconf del paquete al que pertenece la orden que está ejecutando. " "Es necesario para obtener adecuadamente el propietario de las preguntas " "registradas, y también gestionar adecuadamente las órdenes de purgar " "(«purge») y borrar del registro («unregister»)." #. type: =item #: ../../debconf:40 ../../dpkg-preconfigure:24 ../../dpkg-reconfigure:25 msgid "B<-f>I, B<--frontend=>I" msgstr "B<-f>I, B<--frontend=>I" #. type: textblock #: ../../debconf:42 ../../dpkg-preconfigure:26 msgid "Select the frontend to use." msgstr "Selecciona la interfaz a usar." #. type: =item #: ../../debconf:44 ../../dpkg-preconfigure:28 ../../dpkg-reconfigure:36 msgid "B<-p>I, B<--priority=>I" msgstr "B<-p>I, B<--priority=>I" #. type: textblock #: ../../debconf:46 msgid "Specify the minimum priority of question that will be displayed." msgstr "Define la prioridad mínima de las preguntas que se mostrarán." #. type: =item #: ../../debconf:48 ../../dpkg-preconfigure:34 ../../dpkg-reconfigure:42 msgid "B<--terse>" msgstr "B<--terse>" #. type: textblock #: ../../debconf:50 ../../dpkg-preconfigure:36 ../../dpkg-reconfigure:44 msgid "Enables terse output mode. This affects only some frontends." msgstr "" "Activa el modo de salida abreviado. Esto sólo afecta a algunas interfaces." #. type: =head1 #: ../../debconf:54 ../../debconf-apt-progress:107 ../../debconf-copydb:75 #: ../../debconf-set-selections:47 msgid "EXAMPLES" msgstr "EJEMPLOS" #. type: textblock #: ../../debconf:56 msgid "To debug a shell script that uses debconf, you might use:" msgstr "" "Puede usar lo siguiente para depurar un script de intérprete de órdenes que " "use debconf:" #. type: verbatim #: ../../debconf:58 #, no-wrap msgid "" " DEBCONF_DEBUG=developer debconf my-shell-prog\n" "\n" msgstr "" " DEBCONF_DEBUG=developer debconf mi-script-de-consola\n" "\n" #. type: textblock #: ../../debconf:60 msgid "Or, you might use this:" msgstr "O puede usar lo siguiente:" #. type: verbatim #: ../../debconf:62 #, no-wrap msgid "" " debconf --frontend=readline sh -x my-shell-prog\n" "\n" msgstr "" " debconf --frontend=readline sh -x mi-script-de-consola\n" "\n" #. type: SH #: ../../debconf:64 ../../Debconf/Client/ConfModule.pm:154 #: ../../debconf-escape:21 ../../debconf-communicate:39 #: ../../debconf-copydb:102 ../../debconf-getlang:74 #: ../../debconf-loadtemplate:31 ../../debconf-mergetemplate:61 #: ../../debconf-set-selections:70 ../../dpkg-preconfigure:59 #: ../../dpkg-reconfigure:77 debconf.conf.5:537 confmodule.3:36 debconf.7:376 #: debconf-devel.7:958 #, no-wrap msgid "SEE ALSO" msgstr "VÉASE TAMBIÉN" #. type: textblock #: ../../debconf:66 msgid "L, L" msgstr "L, L" #. type: SH #: ../../debconf:117 ../../Debconf/Client/ConfModule.pm:159 #: ../../debconf-escape:72 ../../debconf-communicate:74 #: ../../debconf-copydb:175 ../../debconf-getlang:256 #: ../../debconf-get-selections:78 ../../debconf-loadtemplate:48 #: ../../debconf-mergetemplate:181 ../../debconf-set-selections:226 #: ../../debconf-show:152 ../../dpkg-preconfigure:258 #: ../../dpkg-reconfigure:309 debconf.conf.5:539 confmodule.3:42 debconf.7:382 #: debconf-devel.7:968 #, no-wrap msgid "AUTHOR" msgstr "AUTOR" #. type: textblock #: ../../debconf:119 ../../Debconf/Client/ConfModule.pm:161 #: ../../debconf-apt-progress:658 ../../debconf-communicate:76 #: ../../debconf-copydb:177 ../../debconf-getlang:258 #: ../../debconf-loadtemplate:50 ../../debconf-mergetemplate:183 #: ../../dpkg-preconfigure:260 ../../dpkg-reconfigure:311 msgid "Joey Hess " msgstr "Joey Hess " #. type: textblock #: ../../Debconf/Client/ConfModule.pm:5 msgid "Debconf::Client::ConfModule - client module for ConfModules" msgstr "Debconf::Client::ConfModule - Módulo cliente para ConfModules" #. type: verbatim #: ../../Debconf/Client/ConfModule.pm:9 #, no-wrap msgid "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Back button pressed.\n" " \t...\n" " }\n" " ...\n" "\n" msgstr "" " use Debconf::Client::ConfModule ':all';\n" " version('2.0');\n" " my $capb=capb('backup');\n" " input(\"medium\", \"foo/bar\");\n" " my @ret=go();\n" " if ($ret[0] == 30) {\n" " \t# Back button pressed.\n" " \t...\n" " }\n" " ...\n" "\n" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:22 msgid "" "This is a module to ease writing ConfModules for Debian's configuration " "management system. It can communicate with a FrontEnd via the debconf " "protocol (which is documented in full in the debconf_specification in Debian " "policy)." msgstr "" "Éste es un módulo que facilita escribir ConfModules para el sistema de " "gestión de configuración de Debian. Se puede comunicar con una interfaz a " "través del protocolo de debconf (documentado en «debconf_specification» en " "el Manual de normas de Debian)." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:27 msgid "" "The design is that each command in the protocol is represented by one " "function in this module (with the name lower-cased). Call the function and " "pass in any parameters you want to follow the command. If the function is " "called in scalar context, it will return any textual return code. If it is " "called in list context, an array consisting of the numeric return code and " "the textual return code will be returned." msgstr "" "El diseño es tal que cada orden en el protocolo se representa en este módulo " "con una función (con el nombre en minúsculas). Invoque la función e " "introduzca cualquier parámetro que desee que se inserte a continuación de la " "orden. Si la función se invoca en un contexto escalable («scalar»), " "devolverá cualquier código de retorno textual. Si se invoca en un contexto " "de lista, se devolverá una serie compuesta del código de retorno numérico, " "y el código de retorno textual." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:34 msgid "" "This module uses Exporter to export all functions it defines. To import " "everything, simply import \":all\"." msgstr "" "Este módulo usa Exporter para exportar todas las funciones que define. Para " "importarlo todo, simplemente importe «:all»." #. type: =item #: ../../Debconf/Client/ConfModule.pm:62 msgid "import" msgstr "import" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:64 msgid "" "Ensure that a FrontEnd is running. It's a little hackish. If " "DEBIAN_HAS_FRONTEND is set, a FrontEnd is assumed to be running. If not, " "one is started up automatically and stdin and out are connected to it. Note " "that this function is always run when the module is loaded in the usual way." msgstr "" "Comprueba que se está ejecutando una interfaz. Es un poco confuso. Si se " "define «DEBIAN_HAS_FRONTEND», se asume que una interfaz está en ejecución. " "De no ser así, uno se iniciará automáticamente y la entrada y salida " "estándar se conectará a este. Tenga en cuenta que la función siempre se " "ejecuta al cargar un módulo de la forma habitual." #. type: =item #: ../../Debconf/Client/ConfModule.pm:95 msgid "stop" msgstr "stop" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:97 msgid "" "The frontend doesn't send a return code here, so we cannot try to read it or " "we'll block." msgstr "" "En este caso, la interfaz no devuelve un código de retorno, así que no " "podemos intentar leerlo o se bloqueará." #. type: =item #: ../../Debconf/Client/ConfModule.pm:107 msgid "AUTOLOAD" msgstr "AUTOLOAD" #. type: textblock #: ../../Debconf/Client/ConfModule.pm:109 msgid "Creates handler functions for commands on the fly." msgstr "Crea funciones «handler» para órdenes en el momento." #. type: textblock #: ../../Debconf/Client/ConfModule.pm:156 msgid "" "The debconf specification (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." msgstr "" "La especificación de debconf (/usr/share/doc/debian-policy/" "debconf_specification.txt.gz)." #. type: textblock #: ../../debconf-apt-progress:5 msgid "" "debconf-apt-progress - install packages using debconf to display a progress " "bar" msgstr "" "debconf-apt-progress - Instala paquetes usando debconf para mostrar una " "barra de progreso" #. type: verbatim #: ../../debconf-apt-progress:9 #, no-wrap msgid "" " debconf-apt-progress [--] command [args ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from waypoint --to waypoint [--] command [args ...]\n" " debconf-apt-progress --stop\n" "\n" msgstr "" " debconf-apt-progress [--] orden [argumentos ...]\n" " debconf-apt-progress --config\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from punto-progreso --to punto-progreso [--]\n" " orden [argumentos ...]\n" " debconf-apt-progress --stop\n" "\n" #. type: textblock #: ../../debconf-apt-progress:17 msgid "" "B installs packages using debconf to display a " "progress bar. The given I should be any command-line apt frontend; " "specifically, it must send progress information to the file descriptor " "selected by the C configuration option, and must keep the " "file descriptors nominated by the C configuration option open " "when invoking debconf (directly or indirectly), as those file descriptors " "will be used for the debconf passthrough protocol." msgstr "" "B instala paquetes usando debconf para mostrar una " "barra de progreso. La I dada debería ser cualquier orden de consola " "de una interfaz de APT; específicamente, debe enviar información de progreso " "al descriptor de fichero seleccionado con la opción de configuración C, y debe dejar abiertos los descriptores de ficheros mencionados " "por la opción de configuración C al invocar debconf (directa " "o indirectamente), ya que esos descriptores de fichero se usarán para el " "protocolo de paso («passthrough») de debconf." #. type: textblock #: ../../debconf-apt-progress:25 msgid "" "The arguments to the command you supply should generally include B<-y> (for " "B or B) or similar to avoid the apt frontend prompting " "for input. B cannot do this itself because the " "appropriate argument may differ between apt frontends." msgstr "" "Generalmente, los argumentos de la orden que introduzca deben incluir B<-y> " "(con B o B), o similar para así evitar que la interfaz de " "APT solicite la entrada de datos. B no es capaz de " "hacer esto por sí mismo ya que el argumento adecuado puede diferir según la " "interfaz de APT." #. type: textblock #: ../../debconf-apt-progress:30 msgid "" "The B<--start>, B<--stop>, B<--from>, and B<--to> options may be used to " "create a progress bar with multiple segments for different stages of " "installation, provided that the caller is a debconf confmodule. The caller " "may also interact with the progress bar itself using the debconf protocol if " "it so desires." msgstr "" "Las opciones B<--start>, B<--stop>, B<--from> y B<--to> se pueden usar para " "crear una barra de progreso con varios segmentos para distintas etapas de la " "instalación, probado que el invocador sea un confmodule de debconf. El " "invocador también puede interactuar con la barra de progreso usando el " "protocolo de debconf, si así lo desea." #. type: textblock #: ../../debconf-apt-progress:36 msgid "" "debconf locks its config database when it starts up, which makes it " "unfortunately inconvenient to have one instance of debconf displaying the " "progress bar and another passing through questions from packages being " "installed. If you're using a multiple-segment progress bar, you'll need to " "eval the output of the B<--config> option before starting the debconf " "frontend to work around this. See L below." msgstr "" "debconf bloquea su base de datos de configuración al iniciarse, lo cual hace " "desafortunadamente inconveniente tener una instancia de debconf para mostrar " "la barra de progreso, y otra para pasar por las consultas de los paquetes " "que se están instalando. Si usa una barra de progreso con varios segmentos, " "tendrá que evaluar («eval») la salida de la opción B<--config> antes de " "iniciar la interfaz de debconf para evitar este comportamiento. Consulte " "L más abajo." #. type: =item #: ../../debconf-apt-progress:47 msgid "B<--config>" msgstr "B<--config>" #. type: textblock #: ../../debconf-apt-progress:49 msgid "" "Print environment variables necessary to start up a progress bar frontend." msgstr "" "Muestra las variables de entorno necesarias para iniciar una interfaz de " "barra de progreso." #. type: =item #: ../../debconf-apt-progress:51 msgid "B<--start>" msgstr "B<--start>" #. type: textblock #: ../../debconf-apt-progress:53 msgid "" "Start up a progress bar, running from 0 to 100 by default. Use B<--from> and " "B<--to> to use other endpoints." msgstr "" "Inicia una barra de progreso, que va de 0 a 100 por omisión. Use B<--from> " "y B<--to> para usar otros puntos." #. type: =item #: ../../debconf-apt-progress:56 msgid "B<--from> I" msgstr "B<--from> I" #. type: textblock #: ../../debconf-apt-progress:58 msgid "" "If used with B<--start>, make the progress bar begin at I rather " "than 0." msgstr "" "Si se usa con B<--start>, hace que la barra de progreso comience en el " "I en lugar de 0." #. type: textblock #: ../../debconf-apt-progress:61 msgid "" "Otherwise, install packages with their progress bar beginning at this " "\"waypoint\". Must be used with B<--to>." msgstr "" "De lo contrario, instala los paquetes con la barra de progreso iniciándose " "en este punto de progreso. Se debe usar con B<--to>." #. type: =item #: ../../debconf-apt-progress:64 msgid "B<--to> I" msgstr "B<--to> I" #. type: textblock #: ../../debconf-apt-progress:66 msgid "" "If used with B<--start>, make the progress bar end at I rather " "than 100." msgstr "" "Si se usa con B<--start>, hace que la barra de progreso finalice en el " "I en lugar de 100." #. type: textblock #: ../../debconf-apt-progress:69 msgid "" "Otherwise, install packages with their progress bar ending at this " "\"waypoint\". Must be used with B<--from>." msgstr "" "De lo contrario, instala los paquetes con la barra de progreso finalizando " "en este punto de progreso. Se debe usar con B<--from>." #. type: =item #: ../../debconf-apt-progress:72 msgid "B<--stop>" msgstr "B<--stop>" #. type: textblock #: ../../debconf-apt-progress:74 msgid "Stop a running progress bar." msgstr "Detiene una barra de progreso en ejecución." #. type: =item #: ../../debconf-apt-progress:76 msgid "B<--no-progress>" msgstr "B<--no-progress>" #. type: textblock #: ../../debconf-apt-progress:78 msgid "" "Avoid starting, stopping, or stepping the progress bar. Progress messages " "from apt, media change events, and debconf questions will still be passed " "through to debconf." msgstr "" "Evita iniciar, detener o aumentar la barra de progreso. Aun así, los " "mensajes de progreso de apt, eventos de cambio de dispositivo y consultas de " "debconf se introducirán a través de debconf." #. type: =item #: ../../debconf-apt-progress:82 msgid "B<--dlwaypoint> I" msgstr "B<--dlwaypoint> I" #. type: textblock #: ../../debconf-apt-progress:84 msgid "" "Specify what percent of the progress bar to use for downloading packages. " "The remainder will be used for installing packages. The default is to use " "15% for downloading and the remaining 85% for installing." msgstr "" "Define el porcentaje de la barra de progreso que se usará para la descarga " "de paquetes. El resto se usará para la instalación de paquetes. El valor por " "omisión es un 15% para la descarga y el 85% restante para la instalación." #. type: =item #: ../../debconf-apt-progress:88 msgid "B<--logfile> I" msgstr "B<--logfile> I" #. type: textblock #: ../../debconf-apt-progress:90 msgid "Send the normal output from apt to the given file." msgstr "Envía la salida normal desde APT al fichero dado." #. type: =item #: ../../debconf-apt-progress:92 msgid "B<--logstderr>" msgstr "B<--logstderr>" #. type: textblock #: ../../debconf-apt-progress:94 msgid "" "Send the normal output from apt to stderr. If you supply neither B<--" "logfile> nor B<--logstderr>, the normal output from apt will be discarded." msgstr "" "Envía la salida normal desde APT a la salida de error estándar. Si no " "introduce B<--logfile> o B<--logstderr>, se descartará la salida normal de " "APT." #. type: =item #: ../../debconf-apt-progress:98 msgid "B<-->" msgstr "B<-->" #. type: textblock #: ../../debconf-apt-progress:100 msgid "" "Terminate options. Since you will normally need to give at least the B<-y> " "argument to the command being run, you will usually need to use B<--> to " "prevent that being interpreted as an option to B " "itself." msgstr "" "Finaliza las opciones. Ya que habitualmente tendrá que introducir al menos " "el argumento B<-y> a la orden a ejecutar, generalmente tendrá que usar B<--> " "para evitar que se interprete como una opción de B." #. type: textblock #: ../../debconf-apt-progress:109 msgid "" "Install the GNOME desktop and an X window system development environment " "within a progress bar:" msgstr "" "Para instalar el entorno de escritorio GNOME y el sistema de ventanas X de " "desarrollo dentro de la barra de progreso:" #. type: verbatim #: ../../debconf-apt-progress:112 #, no-wrap msgid "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" msgstr "" " debconf-apt-progress -- aptitude -y install gnome x-window-system-dev\n" "\n" #. type: textblock #: ../../debconf-apt-progress:114 msgid "" "Install the GNOME, KDE, and XFCE desktops within a single progress bar, " "allocating 45% of the progress bar for each of GNOME and KDE and the " "remaining 10% for XFCE:" msgstr "" "Para instalar los entornos de escritorio GNOME, KDE y XFCE dentro de una " "sola barra de progreso, asignando el 45% de la barra de progreso para cada " "uno de GNOME y KDE y el restante 10% para XFCE:" #. type: verbatim #: ../../debconf-apt-progress:118 #, no-wrap msgid "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" msgstr "" " #! /bin/sh\n" " set -e\n" " case $1 in\n" " '')\n" " eval \"$(debconf-apt-progress --config)\"\n" " \"$0\" debconf\n" " ;;\n" " debconf)\n" " . /usr/share/debconf/confmodule\n" " debconf-apt-progress --start\n" " debconf-apt-progress --from 0 --to 45 -- apt-get -y install gnome\n" " debconf-apt-progress --from 45 --to 90 -- apt-get -y install kde\n" " debconf-apt-progress --from 90 --to 100 -- apt-get -y install xfce4\n" " debconf-apt-progress --stop\n" " ;;\n" " esac\n" "\n" #. type: =head1 #: ../../debconf-apt-progress:135 msgid "RETURN CODE" msgstr "CÓDIGO DE RETORNO" #. type: textblock #: ../../debconf-apt-progress:137 msgid "" "The exit code of the specified command is returned, unless the user hit the " "cancel button on the progress bar. If the cancel button was hit, a value of " "30 is returned. To avoid ambiguity, if the command returned 30, a value of 3 " "will be returned." msgstr "" "Se devuelve el código de salida de la orden definida, a menos que el usuario " "pulse el botón de cancelar en la barra de progreso. Si se pulsa el botón de " "cancelar se devuelve un valor de 30. Para evitar la ambigüedad, si la orden " "devolvió 30, se devolverá el valor 3." #. type: =head1 #: ../../debconf-apt-progress:654 msgid "AUTHORS" msgstr "AUTORES" #. type: textblock #: ../../debconf-apt-progress:656 ../../debconf-escape:74 msgid "Colin Watson " msgstr "Colin Watson " #. type: textblock #: ../../debconf-escape:5 msgid "debconf-escape - helper when working with debconf's escape capability" msgstr "" "debconf-escape - Asistente para la interacción con la funcionalidad de " "escape de debconf" #. type: verbatim #: ../../debconf-escape:9 #, no-wrap msgid "" " debconf-escape -e < unescaped-text\n" " debconf-escape -u < escaped-text\n" "\n" msgstr "" " debconf-escape -e < texto-sin-escapar\n" " debconf-escape -u < texto-escapado\n" "\n" #. type: textblock #: ../../debconf-escape:14 msgid "" "When debconf has the 'escape' capability set, it will expect commands you " "send it to have backslashes and newlines escaped (as C<\\\\> and C<\\n> " "respectively) and will in turn escape backslashes and newlines in its " "replies. This can be used, for example, to substitute multi-line strings " "into templates, or to get multi-line extended descriptions reliably using " "C." msgstr "" "Cuando se activa la funcionalidad de «escape» de debconf, éste esperará que " "las órdenes que le envíe tengan barras inversas y saltos de línea (C<\\\\> y " "C<\\n> respectivamente), devolviendo así barras inversas y saltos de línea " "escapadas en sus respuestas. Se puede usar, por ejemplo, para sustituir " "cadenas de varias líneas en las plantillas, o para obtener descripciones " "extendidas en varias líneas adecuadamente usando C." #. type: textblock #: ../../debconf-escape:23 msgid "L (available in the debconf-doc package)" msgstr "L (disponible en el paquete debconf-doc)" #. type: textblock #: ../../debconf-communicate:5 msgid "debconf-communicate - communicate with debconf" msgstr "debconf-communicate - Permite la comunicación con debconf" #. type: verbatim #: ../../debconf-communicate:11 #, no-wrap msgid "" " echo commands | debconf-communicate [options] [package]\n" "\n" msgstr "" " echo órdenes | debconf-communicate [opciones] [paquete]\n" "\n" #. type: textblock #: ../../debconf-communicate:15 msgid "" "B allows you to communicate with debconf on the fly, " "from the command line. The package argument is the name of the package which " "you are pretending to be as you communicate with debconf, and it may be " "omitted if you are lazy. It reads commands in the form used by the debconf " "protocol from stdin. For documentation on the available commands and their " "usage, see the debconf specification." msgstr "" "B le permite comunicarse con debconf en el instante " "desde la línea de órdenes. El argumento I es el nombre del paquete " "que pretende ser al comunicarse con debconf, y se puede omitir si así lo " "desea. Lee las órdenes en la forma usada por el protocolo de debconf desde " "la entrada estándar. Para más documentación sobre las órdenes disponibles y " "su uso consulte la especificación de debconf." #. type: textblock #: ../../debconf-communicate:22 msgid "" "The commands are executed in sequence. The textual return code of each is " "printed out to standard output." msgstr "" "Las órdenes se ejecuten secuencialmente. El código de retorno textual de " "cada uno de ellos se muestra por la salida estándar." #. type: textblock #: ../../debconf-communicate:25 msgid "" "The return value of this program is the numeric return code of the last " "executed command." msgstr "" "El valor de retorno de este programa es el código de retorno numérico de la " "última orden ejecutada." #. type: SH #: ../../debconf-communicate:28 debconf.conf.5:444 #, no-wrap msgid "EXAMPLE" msgstr "EJEMPLO" #. type: verbatim #: ../../debconf-communicate:30 #, no-wrap msgid "" " echo get debconf/frontend | debconf-communicate\n" "\n" msgstr "" " echo get debconf/frontend | debconf-communicate\n" "\n" #. type: textblock #: ../../debconf-communicate:32 msgid "Print out the value of the debconf/frontend question." msgstr "Muestra el valor de la pregunta debconf/frontend." #. type: =head1 #: ../../debconf-communicate:34 ../../debconf-loadtemplate:25 #: ../../debconf-set-selections:20 msgid "WARNING" msgstr "AVISO" #. type: textblock #: ../../debconf-communicate:36 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging." msgstr "" "¡Este programa nunca se debería usar mediante un script de responsable de un " "paquete que usa debconf! No obstante, puede ser útil en la depuración." #. type: textblock #: ../../debconf-communicate:41 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-copydb:5 msgid "debconf-copydb - copy a debconf database" msgstr "debconf-copydb - Copia una base de datos de debconf" #. type: verbatim #: ../../debconf-copydb:19 #, no-wrap msgid "" " debconf-copydb sourcedb destdb [--pattern=pattern] [--owner-pattern=pattern] [--config=Foo:bar]\n" "\n" msgstr "" " debconf-copydb base-de-datos_origen base-de-datos_destino [--pattern=patrón] [--owner-pattern=patrón] [--config=Foo:bar]\n" "\n" #. type: textblock #: ../../debconf-copydb:32 msgid "" "B copies items from an existing debconf database into " "another, possibly new database. The two databases may have different " "formats; if so a conversion will automatically be done." msgstr "" "B copia elementos de una base de datos existente a otra, " "posiblemente nueva. Puede que el formato de las dos bases de datos sea " "distinto; en este caso, se hará una conversión automática." #. type: =item #: ../../debconf-copydb:40 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:42 msgid "" "The name of the source database. Typically it will be defined in your " "debconf.conf (or .debconfrc) file." msgstr "" "En nombre de la base de datos original. Habitualmente, se definirá en el " "fichero «debconf.conf» (o «.debconfrc»)." #. type: =item #: ../../debconf-copydb:45 msgid "I" msgstr "I" #. type: textblock #: ../../debconf-copydb:47 msgid "" "The name of the destination database. It may be defined in debconf.conf or ." "debconfrc, or you might define it on the command line (see below)." msgstr "" "El nombre de la base de datos destino. Se puede definir en «debconf.conf» o " "«.debconfrc», o lo puede especificar en la línea de órdenes (véase más " "abajo)." #. type: =item #: ../../debconf-copydb:51 msgid "B<-p> I, B<--pattern> I" msgstr "B<-p> I, B<--patrón> I" #. type: textblock #: ../../debconf-copydb:53 msgid "" "If this is specified, only items in I whose names match the " "pattern will be copied." msgstr "" "Si se define, sólo se copiarán los elementos de la I " "cuyo nombre coincida con el patrón." #. type: =item #: ../../debconf-copydb:56 msgid "B<--owner-pattern> I" msgstr "B<--owner-pattern> I" #. type: textblock #: ../../debconf-copydb:58 msgid "" "If this is specified, only items in I whose owners match the " "pattern will be copied." msgstr "" "Si se define, sólo se copiarán los elementos de la I " "cuyos propietarios coincidan con el patrón." #. type: =item #: ../../debconf-copydb:61 msgid "B<-c> I, B<--config> I" msgstr "B<-c> I, B<--config> I" #. type: textblock #: ../../debconf-copydb:63 msgid "Set option Foo to bar. This is similar to writing:" msgstr "Define la opción Foo a bar. Esto es similar a escribir:" #. type: verbatim #: ../../debconf-copydb:65 #, no-wrap msgid "" " Foo: bar\n" "\n" msgstr "" " Foo: bar\n" "\n" #. type: textblock #: ../../debconf-copydb:67 msgid "" "In debconf.conf, except you probably want to leave off the space on the " "command line (or quote it: \"Foo: bar\"). Generally must be used multiple " "times, to build up a full configuration stanza. While blank lines are used " "to separate stanzas in debconf.conf, this program will assume that \"Name:" "dbname\" denotes the beginning of a new stanza." msgstr "" "en «debconf.conf», a excepción de que posiblemente quiera omitir el espacio " "en la línea de órdenes (o use comillas: \"Foo:bar\"). Habitualmente, querrá " "usar esto varias veces para construir una definición de configuración " "completa. Mientras que se usan líneas en blanco para separar las " "definiciones en «debconf.conf», este programa asume que \"Name:" "dbname\" (nombre: nombre-base-de-datos) denota el principio de una " "definición nueva." #. type: verbatim #: ../../debconf-copydb:77 #, no-wrap msgid "" " debconf-copydb configdb backup\n" "\n" msgstr "" " debconf-copydb configdb backup\n" "\n" #. type: textblock #: ../../debconf-copydb:79 msgid "" "Copy all of configdb to backup, assuming you already have the backup " "database defined in debconf.conf." msgstr "" "Copia toda su configuración de la base de datos («configdb») a la copia de " "respaldo («backup»), suponiendo que ya tiene una base de datos de respaldo " "definida en «debconf.conf»." #. type: verbatim #: ../../debconf-copydb:82 #, no-wrap msgid "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" msgstr "" " debconf-copydb configdb newdb --pattern='^slrn/' \\\n" " \t--config=Name:newdb --config=Driver:File \\\n" "\t--config=Filename:newdb.dat\n" "\n" #. type: textblock #: ../../debconf-copydb:86 msgid "" "Copy slrn's data out of configdb, and into newdb. newdb is not defined in " "the rc file, so the --config switches set up the database on the fly." msgstr "" "Copia los datos de slrn desde «configdb» a «newdb» (base de datos nueva). " "«newdb» no este definido en el fichero de configuración, así que la opción " "«--config» define la base de datos en el momento." #. type: verbatim #: ../../debconf-copydb:89 #, no-wrap msgid "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" msgstr "" " debconf-copydb configdb stdout -c Name:stdout -c Driver:Pipe \\\n" " \t-c InFd:none --pattern='^foo/'\n" "\n" #. type: textblock #: ../../debconf-copydb:92 msgid "Spit out all the items in the debconf database related to package foo." msgstr "" "Muestra todos los elementos en la base de datos de debconf relacionados con " "el paquete «foo»." #. type: verbatim #: ../../debconf-copydb:94 #, no-wrap msgid "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" msgstr "" " debconf-copydb configdb pipe --config=Name:pipe \\\n" " --config=Driver:Pipe --config=InFd:none | \\\n" " \tssh remotehost debconf-copydb pipe configdb \\\n" "\t\t--config=Name:pipe --config=Driver:Pipe\n" "\n" #. type: textblock #: ../../debconf-copydb:99 msgid "" "This uses the special purpose pipe driver to copy a database to a remote " "system." msgstr "" "Esto hace uso del controlador de fines específicos «pipe» (tubería) para " "copiar una base de datos a un sistema remoto." #. type: textblock #: ../../debconf-copydb:104 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-getlang:5 msgid "debconf-getlang - extract a language from a templates file" msgstr "debconf-getlang - Extrae un idioma de un fichero de plantilla" #. type: verbatim #: ../../debconf-getlang:18 #, no-wrap msgid "" " debconf-getlang lang master [translation]\n" " debconf-getlang --stats master translation [...]\n" "\n" msgstr "" " debconf-getlang idioma original [traducción]\n" " debconf-getlang --stats original traducción [...]\n" "\n" #. type: textblock #: ../../debconf-getlang:23 msgid "" "Note: This utility is deprecated; you should switch to using the po-debconf " "package." msgstr "" "Nota: Esta herramienta está obsoleta, debería usar el paquete po-debconf." #. type: textblock #: ../../debconf-getlang:25 msgid "" "This program helps make and manage translations of debconf templates. There " "are basically three situations in which this program might be called:" msgstr "" "Este programa ayuda a crear y gestionar las traducciones de las plantillas " "de debconf. Básicamente, hay tres situaciones en las que se podría invocar " "este programa:" #. type: =item #: ../../debconf-getlang:30 msgid "A translation is just being started." msgstr "Al iniciar una traducción." #. type: textblock #: ../../debconf-getlang:32 msgid "" "You want to provide the translator with a file they can work on that has the " "English fields from your templates file, plus blank Field-ll fields for the " "target language that they can fill in." msgstr "" "Desea ofrecer al traductor un fichero sobre el que trabajar que tenga los " "campos en inglés de su fichero de plantilla, además de campos secundarios " "que pueden rellenar con el idioma de destino." #. type: textblock #: ../../debconf-getlang:36 msgid "" "To do this, run the program with first parameter being the code for the " "language that is being translated to, and the second parameter being the " "filename of the English templates file." msgstr "" "Para ello, ejecute el programa con el primer parámetro, siendo éste el " "código del idioma al que se está traduciendo, y el nombre del fichero de " "plantilla en inglés como segundo parámetro." #. type: =item #: ../../debconf-getlang:40 msgid "A translation is well under way." msgstr "Una traducción está en curso." #. type: textblock #: ../../debconf-getlang:42 msgid "" "You have changed some English text, or added more items to your templates " "file, and you want to send the translators a file with the English text plus " "their current translations (or you are the translator, and you want to " "generate such a file for your own use)." msgstr "" "Ha modificado parte del texto en inglés, o ha añadido elementos a su fichero " "de plantilla y desea enviar a los traductores un fichero con el texto en " "inglés además de sus traducciones ya realizadas (o bien es el traductor, y " "desea generar tal fichero para su uso personal)." #. type: textblock #: ../../debconf-getlang:47 msgid "" "To accomplish this, run the program with the first parameter being the the " "code for the language that is being translated to, the second parameter " "being the filename of the master English templates file, and the third " "parameter being the filename of the current translated file." msgstr "" "Para ello, ejecute el programa con el primer parámetro siendo el código del " "lenguaje al que se está traduciendo, un segundo parámetro siendo el nombre " "del fichero de plantilla original en inglés, y un tercer parámetro siendo el " "nombre de fichero del fichero actualmente traducido." #. type: textblock #: ../../debconf-getlang:52 msgid "" "When run this way, the program is smart enough to notice fuzzy translations. " "For example a fuzzy Description will be output as Description--fuzzy, " "and a new, blank Description- will be added. Translators should " "remove the -fuzzy fields as they correct the fuzzy translations." msgstr "" "Cuando se ejecuta de este modo, este programa es suficientemente inteligente " "como para detectar las cadenas difusas («fuzzy»). Por ejemplo, un campo " "«Description» difuso saldrá como «Description--fuzzy», y se añadirá " "un nuevo campo vacío «Description-». Los traductores deberían eliminar " "los campos «-fuzzy» a medida que corrigen las traducciones difusas." #. type: =item #: ../../debconf-getlang:58 msgid "Checking the status of a translation" msgstr "Comprobar el estado de la traducción." #. type: textblock #: ../../debconf-getlang:60 msgid "" "To check the status of a translation, use the --status flag, and pass the " "english template file as the first parameter, and all the other translated " "templates after that. It will output statistics for each of them. For " "example:" msgstr "" "Use la opción «--status» para comprobar el estado de una traducción, e " "introduzca el fichero de plantilla en inglés como el primer parámetro, " "seguido de todas las plantillas traducidas. Devolverá las estadísticas de " "cada uno de ellos. Por ejemplo:" #. type: verbatim #: ../../debconf-getlang:65 #, no-wrap msgid "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" msgstr "" " debconf-getlang --stats debian/templates debian/templates.*\n" "\n" #. type: =head1 #: ../../debconf-getlang:69 msgid "NOTE" msgstr "NOTA" #. type: textblock #: ../../debconf-getlang:71 msgid "" "Note that the text in the generated templates may be word-wrapped by debconf." msgstr "" "Tenga en cuenta que es probable que debconf justifique el texto en las " "plantillas generadas." #. type: textblock #: ../../debconf-getlang:76 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-get-selections:5 msgid "debconf-get-selections - output contents of debconf database" msgstr "" "debconf-get-selections - Devuelve el contenido de una base de datos de " "debconf" #. type: textblock #: ../../debconf-get-selections:9 msgid "debconf-get-selections [--installer]" msgstr "debconf-get-selections [--installer]" #. type: textblock #: ../../debconf-get-selections:13 msgid "" "Output the current debconf database in a format understandable by debconf-" "set-selections." msgstr "" "Devuelve la base de datos de debconf actual en un formato comprensible por " "«debconf-set-selections»." #. type: textblock #: ../../debconf-get-selections:16 msgid "" "To dump the debconf database of the debian-installer, from /var/log/" "installer/cdebconf, use the --installer parameter." msgstr "" "Use el parámetro «--installer» para volcar la base de datos de debconf de " "debian-installer, tomando como fuente «/var/log/installer/cdebconf»." #. type: textblock #: ../../debconf-get-selections:80 ../../debconf-set-selections:228 msgid "Petter Reinholdtsen " msgstr "Petter Reinholdtsen " #. type: textblock #: ../../debconf-loadtemplate:5 msgid "debconf-loadtemplate - load template file into debconf database" msgstr "" "debconf-loadtemplate - Carga un fichero de plantilla en la base de datos de " "debconf" #. type: verbatim #: ../../debconf-loadtemplate:16 #, no-wrap msgid "" " debconf-loadtemplate owner file [file ..]\n" "\n" msgstr "" " debconf-loadtemplate propietario fichero [fichero ..]\n" "\n" #. type: textblock #: ../../debconf-loadtemplate:20 msgid "" "Loads one or more template files into the debconf database. The first " "parameter specifies the owner of the templates (typically, the owner is the " "name of a debian package). The remaining parameters are template files to " "load." msgstr "" "Carga uno o más ficheros de plantilla en la base de datos de debconf. El " "primer parámetro define al propietario de las plantillas (habitualmente, el " "propietario es el nombre de un paquete debian). Los parámetros restantes son " "los ficheros de plantilla a cargar." #. type: textblock #: ../../debconf-loadtemplate:27 msgid "" "This program should never be used from a maintainer script of a package that " "uses debconf! It may however, be useful in debugging, or to seed the debconf " "database." msgstr "" "¡Este programa nunca se debería usar a través de un script de desarrollador " "o un paquete que usa debconf! Sin embargo, puede ser útil en la depuración " "de fallos o para configurar la base de datos de debconf." #. type: textblock #: ../../debconf-loadtemplate:33 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-mergetemplate:5 msgid "debconf-mergetemplate - merge together multiple debconf template files" msgstr "" "debconf-mergetemplate - Fusiona varios ficheros de plantilla de debconf" #. type: verbatim #: ../../debconf-mergetemplate:19 #, no-wrap msgid "" " debconf-mergetemplate [options] [templates.ll ...] templates\n" "\n" msgstr "" " debconf-mergetemplate [opciones] [plantillas.ll ...] plantillas\n" "\n" #. type: textblock #: ../../debconf-mergetemplate:23 msgid "" "Note: This utility is deprecated. You should switch to using po-debconf's " "po2debconf program." msgstr "" "Nota: Esta herramienta está obsoleta. Debería usar el programa po2debconf " "del paquete po-debconf." #. type: textblock #: ../../debconf-mergetemplate:26 msgid "" "This program is useful if you have multiple debconf templates files which " "you want to merge together into one big file. All the specified files will " "be read in, merged, and output to standard output." msgstr "" "Este programa es útil si tiene varios ficheros de plantilla de debconf que " "desea fusionar en un sólo fichero grande. Todos los ficheros definidos se " "leerán, fusionarán y mostrarán por la salida estándar." #. type: textblock #: ../../debconf-mergetemplate:30 msgid "" "This can be especially useful if you are dealing with translated template " "files. In this case, you might have your main template file, plus several " "other files provided by the translators. These files will have translated " "fields in them, and maybe the translators left in the english versions of " "the fields they translated, for their reference." msgstr "" "Esto puede ser particularmente útil cuando está tratando con ficheros de " "plantilla traducidos. En este caso, puede que tenga su fichero de plantilla " "principal, además de varios otros ficheros proporcionados por los " "traductores. Estos ficheros contendrán campos traducidos, y puede que los " "traductores hayan dejado las versiones en inglés de los campos que han " "traducido como referencia." #. type: textblock #: ../../debconf-mergetemplate:36 msgid "" "So, you want to merge together all the translated templates files with your " "main templates file. Any fields that are unique to the translated files need " "to be added in to the correct templates, but any fields they have in common " "should be superseded by the fields in the main file (which might be more up-" "to-date)." msgstr "" "Digamos que desea fusionar todos los ficheros de plantilla traducidos con su " "fichero de plantilla original. Todos los campos que son exclusivos de los " "ficheros traducidos se tendrán que añadir a las plantillas correctas, pero " "todos los campos que tienen en común se deben reemplazar por los campos en " "el fichero principal (que puede estar más actualizado)." #. type: textblock #: ../../debconf-mergetemplate:42 msgid "" "This program handles that case properly, just list each of the translated " "templates files, and then your main templates file last." msgstr "" "Este programa trata esta situación adecuadamente, simplemente defina cada " "uno de los ficheros de plantilla traducidos, y por último su fichero de " "plantilla original." #. type: =item #: ../../debconf-mergetemplate:49 msgid "--outdated" msgstr "--outdated" #. type: textblock #: ../../debconf-mergetemplate:51 msgid "" "Merge in even outdated translations. The default is to drop them with a " "warning message." msgstr "" "Fusiona incluso traducciones obsoletas. El comportamiento por omisión es " "omitirlos con un mensaje de aviso." #. type: =item #: ../../debconf-mergetemplate:54 msgid "--drop-old-templates" msgstr "--drop-old-templates" #. type: textblock #: ../../debconf-mergetemplate:56 msgid "" "If a translation has an entire template that is not in the master file (and " "thus is probably an old template), drop that entire template." msgstr "" "Si una traducción tiene una plantilla completa que no está en el fichero " "original (y por ello, probablemente sea una plantilla antigua), omite la " "plantilla por completo." #. type: textblock #: ../../debconf-mergetemplate:63 msgid "L" msgstr "L" #. type: textblock #: ../../debconf-set-selections:5 #, fuzzy #| msgid "" #| "debconf-set-selections - insert new default values into the debconf " #| "database" msgid "debconf-set-selections - insert new values into the debconf database" msgstr "" "debconf-set-selections - Inserta nuevos valores predefinidos en la base de " "datos de debconf" #. type: verbatim #: ../../debconf-set-selections:9 #, no-wrap msgid "" " debconf-set-selections file\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" msgstr "" " debconf-set-selections fichero\n" " debconf-get-selections | ssh newhost debconf-set-selections\n" "\n" #. type: textblock #: ../../debconf-set-selections:14 msgid "" "B can be used to pre-seed the debconf database with " "answers, or to change answers in the database. Each question will be marked " "as seen to prevent debconf from asking the question interactively." msgstr "" "B se puede usar para preconfigurar la base de datos " "de debconf, o para cambiar las respuestas en la base de datos. Cada pregunta " "se marcará como ya vista («seen») para evitar que debconf plantee la " "cuestión de forma interactiva." #. type: textblock #: ../../debconf-set-selections:18 msgid "Reads from a file if a filename is given, otherwise from stdin." msgstr "" "Lee desde un fichero si se da un nombre de fichero, de lo contrario leerá " "desde la entrada estándar." #. type: textblock #: ../../debconf-set-selections:22 msgid "" "Only use this command to seed debconf values for packages that will be or " "are installed. Otherwise you can end up with values in the database for " "uninstalled packages that will not go away, or with worse problems involving " "shared values. It is recommended that this only be used to seed the database " "if the originating machine has an identical install." msgstr "" "Use esta orden sólo para introducir valores de debconf para paquetes que se " "van a instalar, o que ya lo están. De lo contrario puede acabar con valores " "en la base de datos para paquetes desinstalados, que no desaparecerán, o con " "problemas más profundos relacionados con valores compartidos. Se recomienda " "su uso para configurar la base de datos sólo si el sistema original tiene " "una instalación idéntica." #. type: =head1 #: ../../debconf-set-selections:28 msgid "DATA FORMAT" msgstr "FORMATO DE DATOS" #. type: textblock #: ../../debconf-set-selections:30 msgid "" "The data is a series of lines. Lines beginning with a # character are " "comments. Blank lines are ignored. All other lines set the value of one " "question, and should contain four values, each separated by one character of " "whitespace. The first value is the name of the package that owns the " "question. The second is the name of the question, the third value is the " "type of this question, and the fourth value (through the end of the line) " "is the value to use for the answer of the question." msgstr "" "Los datos son una serie de líneas. Las líneas que comienzan con un carácter " "«#» son comentarios, y se ignoran las líneas en blanco. Todas las otras " "líneas definen el valor de una pregunta y deberían contener cuatro valores, " "cada uno de ellos separado por un carácter de espacio en blanco. El primer " "valor es el nombre del paquete al que pertenece la pregunta. El segundo es " "el nombre de la pregunta, el tercer valor es el tipo de pregunta y el cuarto " "valor (al final de la línea) es el valor a usar para responder a la pregunta." #. type: textblock #: ../../debconf-set-selections:38 msgid "" "Alternatively, the third value can be \"seen\"; then the preseed line only " "controls whether the question is marked as seen in debconf's database. Note " "that preseeding a question's value defaults to marking that question as " "seen, so to override the default value without marking a question seen, you " "need two lines." msgstr "" "De forma alternativa, el tercer valor puede ser «seen»; en este caso, la " "línea introducida sólo controla si la pregunta se marca como ya vista en la " "base de datos de debconf. Tenga en cuenta que, por omisión, introducir el " "valor de una pregunta marca la pregunta como ya vista, así que si desea " "sustituir el valor predefinido sin marcar la pregunta como ya vista " "necesitará dos líneas." #. type: textblock #: ../../debconf-set-selections:44 msgid "" "Lines can be continued to the next line by ending them with a \"\\\" " "character." msgstr "" "Puede continuar las líneas en la siguiente línea finalizándolas con el " "carácter «\\»." #. type: verbatim #: ../../debconf-set-selections:49 #, no-wrap msgid "" " # Force debconf priority to critical.\n" " debconf debconf/priority select critical\n" "\n" msgstr "" " # Fuerza la prioridad de debconf a crítico.\n" " debconf debconf/priority select critical\n" "\n" #. type: verbatim #: ../../debconf-set-selections:52 #, no-wrap msgid "" " # Override default frontend to readline, but allow user to select.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" msgstr "" " # Reemplaza la interfaz predeterminada con readline, pero permite la\n" " # selección del usuario.\n" " debconf debconf/frontend select readline\n" " debconf debconf/frontend seen false\n" "\n" #. type: =item #: ../../debconf-set-selections:60 msgid "B<--verbose>, B<-v>" msgstr "B<--verbose>, B<-v>" #. type: textblock #: ../../debconf-set-selections:62 msgid "verbose output" msgstr "Salida informativa." #. type: =item #: ../../debconf-set-selections:64 msgid "B<--checkonly>, B<-c>" msgstr "B<--checkonly>, B<-c>" #. type: textblock #: ../../debconf-set-selections:66 msgid "only check the input file format, do not save changes to database" msgstr "" "Sólo comprueba el formato del fichero de entrada, no guarda los cambios en " "la base de datos." #. type: textblock #: ../../debconf-set-selections:72 msgid "L (available in the debconf-utils package)" msgstr "L (disponible en el paquete debconf-utils)" #. type: textblock #: ../../debconf-show:5 msgid "debconf-show - query the debconf database" msgstr "debconf-show - Realiza consultas a la base de datos de debconf" #. type: verbatim #: ../../debconf-show:9 #, no-wrap msgid "" " debconf-show packagename [...] [--db=dbname]\n" " debconf-show --listowners [--db=dbname]\n" " debconf-show --listdbs\n" "\n" msgstr "" " debconf-show paquete [...] [--db=nombre-base-de-datos]\n" " debconf-show --listowners [--db=nombre-base-de-datos]\n" " debconf-show --listdbs\n" "\n" #. type: textblock #: ../../debconf-show:15 msgid "B lets you query the debconf database in different ways." msgstr "" "B le permite consultar la base de datos de debconf de varias " "maneras." #. type: textblock #: ../../debconf-show:17 msgid "" "The most common use is \"debconf-show packagename\", which displays all " "items in the debconf database owned by a given package, and their current " "values. Questions that have been asked already are prefixed with an '*'." msgstr "" "La más común es «debconf-show paquete», que muestra todos los elementos en " "la base de datos de debconf que pertenecen al paquete dado, y sus valores " "actuales. Las preguntas que ya se han planteado se prefijan con «*»." #. type: textblock #: ../../debconf-show:21 msgid "" "This can be useful as a debugging aid, and especially handy in bug reports " "involving a package's use of debconf." msgstr "" "Esto puede ser útil como una ayuda durante la depuración de fallos, y " "especialmente útil en los informes de fallo relacionados con el uso de " "debconf por parte de un paquete." #. type: =item #: ../../debconf-show:28 msgid "B<--db=>I" msgstr "B<--db=>I" #. type: textblock #: ../../debconf-show:30 msgid "" "Specify the database to query. By default, debconf-show queries the main " "database." msgstr "" "Define la base de datos a consultar. Por omisión, «debconf-show» consulta la " "base de datos principal." #. type: =item #: ../../debconf-show:33 msgid "B<--listowners>" msgstr "B<--listowners>" #. type: textblock #: ../../debconf-show:35 msgid "" "Lists all owners of questions in the database. Generally an owner is " "equivalent to a debian package name." msgstr "" "Enumera todos los propietarios de las preguntas en la base de datos. " "Habitualmente, un propietario equivale al nombre de un paquete debian." #. type: =item #: ../../debconf-show:38 msgid "B<--listdbs>" msgstr "B<--listdbs>" #. type: textblock #: ../../debconf-show:40 msgid "Lists all available databases." msgstr "Enumera todas las bases de datos disponibles." #. type: textblock #: ../../debconf-show:154 msgid "Joey Hess and Sylvain Ferriol" msgstr "Joey Hess y Sylvain Ferriol" #. type: textblock #: ../../dpkg-preconfigure:5 msgid "" "dpkg-preconfigure - let packages ask questions prior to their installation" msgstr "" "dpkg-preconfigure - Permite que los paquetes formulen preguntas antes de su " "instalación" #. type: verbatim #: ../../dpkg-preconfigure:9 #, no-wrap msgid "" " dpkg-preconfigure [options] package.deb\n" "\n" msgstr "" " dpkg-preconfigure [opciones] paquete.deb\n" "\n" #. type: verbatim #: ../../dpkg-preconfigure:11 #, no-wrap msgid "" " dpkg-preconfigure --apt\n" "\n" msgstr "" " dpkg-preconfigure --apt\n" "\n" #. type: textblock #: ../../dpkg-preconfigure:15 msgid "" "B lets packages ask questions before they are installed. " "It operates on a set of debian packages, and all packages that use debconf " "will have their config script run so they can examine the system and ask " "questions." msgstr "" "B permite que los paquetes formulen preguntas antes de su " "instalación. Opera con un conjunto de paquetes debian, ejecutando el script " "de configuración de todos aquellos que usen debconf de forma que puedan " "examinar el sistema y formular preguntas." #. type: textblock #: ../../dpkg-preconfigure:30 msgid "" "Set the lowest priority of questions you are interested in. Any questions " "with a priority below the selected priority will be ignored and their " "default answers will be used." msgstr "" "Define la prioridad más baja de las preguntas que le interesan. Todas las " "preguntas con una prioridad menor que la prioridad seleccionada se " "ignorarán, usando las respuestas predefinidas." #. type: =item #: ../../dpkg-preconfigure:38 msgid "B<--apt>" msgstr "B<--apt>" #. type: textblock #: ../../dpkg-preconfigure:40 msgid "" "Run in apt mode. It will expect to read a set of package filenames from " "stdin, rather than getting them as parameters. Typically this is used to " "make apt run dpkg-preconfigure on all packages before they are installed. " "To do this, add something like this to /etc/apt/apt.conf:" msgstr "" "Ejecuta en modo apt. Esperará leer un conjunto de nombres de fichero de " "paquete por la entrada estándar en lugar de obtenerlos como parámetros. " "Habitualmente, se usa para hacer que apt ejecute «dpkg-preconfigure» sobre " "todos los paquetes antes de su instalación. Para hacer esto, añada algo " "parecido al ejemplo en «/etc/apt/apt.conf»:" #. type: verbatim #: ../../dpkg-preconfigure:45 #, no-wrap msgid "" " // Pre-configure all packages before\n" " // they are installed.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" msgstr "" " // Preconfigurar todos los paquetes\n" " // antes de su instalación.\n" " DPkg::Pre-Install-Pkgs {\n" " \t\"dpkg-preconfigure --apt --priority=low\";\n" " };\n" "\n" #. type: =item #: ../../dpkg-preconfigure:51 ../../dpkg-reconfigure:69 msgid "B<-h>, B<--help>" msgstr "B<-h>, B<--help>" #. type: textblock #: ../../dpkg-preconfigure:53 ../../dpkg-reconfigure:71 msgid "Display usage help." msgstr "Muestra la ayuda de uso." #. type: textblock #: ../../dpkg-preconfigure:61 ../../dpkg-reconfigure:79 msgid "L" msgstr "L" #. type: textblock #: ../../dpkg-reconfigure:5 msgid "dpkg-reconfigure - reconfigure an already installed package" msgstr "dpkg-reconfigure - Reconfigura un paquete ya instalado" #. type: verbatim #: ../../dpkg-reconfigure:9 #, no-wrap msgid "" " dpkg-reconfigure [options] packages\n" "\n" msgstr "" " dpkg-reconfigure [opciones] paquetes\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:13 msgid "" "B reconfigures packages after they have already been " "installed. Pass it the names of a package or packages to reconfigure. It " "will ask configuration questions, much like when the package was first " "installed." msgstr "" "B reconfigura paquetes después de su instalación. " "Introduzca los nombres del paquete o paquetes a reconfigurar. Formulará " "preguntas de configuración de forma similar a cuando el paquete se instaló " "en primer lugar." #. type: textblock #: ../../dpkg-reconfigure:18 msgid "" "If you just want to see the current configuration of a package, see " "L instead." msgstr "" "Si sólo desea ver la configuración actual de un paquete, consulte L." #. type: textblock #: ../../dpkg-reconfigure:27 msgid "" "Select the frontend to use. The default frontend can be permanently changed " "by:" msgstr "" "Selecciona la interfaz a usar. La interfaz predefinida se puede cambiar de " "forma permanente con:" #. type: verbatim #: ../../dpkg-reconfigure:30 #, no-wrap msgid "" " dpkg-reconfigure debconf\n" "\n" msgstr "" " dpkg-reconfigure debconf\n" "\n" #. type: textblock #: ../../dpkg-reconfigure:32 msgid "" "Note that if you normally have debconf set to use the noninteractive " "frontend, dpkg-reconfigure will use the dialog frontend instead, so you " "actually get to reconfigure the package." msgstr "" "Tenga en cuenta que si habitualmente tiene configurado debconf para que use " "la interfaz no interactiva, dpkg-reconfigure usará la interfaz dialog, de " "forma que realmente pueda reconfigurar el paquete." #. type: textblock #: ../../dpkg-reconfigure:38 msgid "" "Specify the minimum priority of question that will be displayed. dpkg-" "reconfigure normally shows low priority questions no matter what your " "default priority is. See L for a list." msgstr "" "Define la prioridad mínima de las preguntas a mostrar. Habitualmente, dpkg-" "reconfigure muestra preguntas con una baja prioridad sin importar cuál es la " "prioridad predefinida. Para una lista, consulte L." #. type: =item #: ../../dpkg-reconfigure:46 msgid "B<--default-priority>" msgstr "B<--default-priority>" #. type: textblock #: ../../dpkg-reconfigure:48 msgid "" "Use whatever the default priority of question is, instead of forcing the " "priority to low." msgstr "" "Usa la prioridad predefinida de la pregunta, en lugar de forzar la prioridad " "a baja." #. type: =item #: ../../dpkg-reconfigure:51 msgid "B<-u>, B<--unseen-only>" msgstr "B<-u>, B<--unseen-only>" #. type: textblock #: ../../dpkg-reconfigure:53 msgid "" "By default, all questions are shown, even if they have already been " "answered. If this parameter is set though, only questions that have not yet " "been seen will be asked." msgstr "" "Por omisión se muestran todas las preguntas aunque ya se hayan preguntado. " "Si define este parámetro, sólo se formularán las preguntas que nunca se " "hayan mostrado." #. type: =item #: ../../dpkg-reconfigure:57 msgid "B<--force>" msgstr "B<--force>" #. type: textblock #: ../../dpkg-reconfigure:59 msgid "" "Force dpkg-reconfigure to reconfigure a package even if the package is in an " "inconsistent or broken state. Use with caution." msgstr "" "Fuerza dpkg-reconfigure a reconfigurar un paquete, incluso si está en un " "estado roto o inconsistente. Usar con precaución." #. type: =item #: ../../dpkg-reconfigure:62 msgid "B<--no-reload>" msgstr "B<--no-reload>" #. type: textblock #: ../../dpkg-reconfigure:64 msgid "" "Prevent dpkg-reconfigure from reloading templates. Use with caution; this " "will prevent dpkg-reconfigure from repairing broken templates databases. " "However, it may be useful in constrained environments where rewriting the " "templates database is expensive." msgstr "" "Evita que dpkg-reconfigure cargue las plantillas otra vez. Usar con " "precaución; esto evitará que dpkg-reconfigure repare bases de datos rotas de " "plantillas. Sin embargo, puede ser útil en entornos limitados en los que " "reescribir la base de datos de plantillas tenga un alto coste." #. type: TH #: debconf.conf.5:1 #, no-wrap msgid "DEBCONF.CONF" msgstr "DEBCONF.CONF" #. type: Plain text #: debconf.conf.5:4 msgid "debconf.conf - debconf configuration file" msgstr "debconf.conf - Fichero de configuración de debconf" #. type: Plain text #: debconf.conf.5:12 msgid "" "Debconf is a configuration system for Debian packages. /etc/debconf.conf and " "~/.debconfrc are configuration files debconf uses to determine which " "databases it should use. These databases are used for storing two types of " "information; dynamic config data the user enters into it, and static " "template data. Debconf offers a flexible, extensible database backend. New " "drivers can be created with a minimum of effort, and sets of drivers can be " "combined in various ways." msgstr "" "Debconf es un sistema de configuración de paquetes de Debian. «/etc/debconf." "conf» y «~/.debconfrc» son los ficheros de configuración que usa debconf " "para determinar las bases de datos que debería usar. Estas bases de datos " "guardan dos tipos de información; los datos dinámicos de configuración que " "el usuario introduce, y datos estáticos de plantilla. Debconf ofrece un " "sistema de base de datos flexible y extensible. Puede crear controladores " "nuevos con un esfuerzo mínimo, y combinar conjuntos de controladores de " "varias maneras." #. type: Plain text #: debconf.conf.5:17 #, no-wrap msgid "" " # This is a sample config file that is\n" " # sufficient to use debconf.\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" " # Este es un fichero de configuración de\n" " # ejemplo suficiente para usar debconf.\n" " Config: configdb\n" " Templates: templatedb\n" #. type: Plain text #: debconf.conf.5:21 #, no-wrap msgid "" " Name: configdb\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" " Name: configuración-base-de-datos\n" " Driver: File\n" " Filename: /var/cache/debconf/config.dat\n" #. type: Plain text #: debconf.conf.5:26 #, no-wrap msgid "" " Name: templatedb\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" msgstr "" " Name: base-de-datos-de-plantillas\n" " Driver: File\n" " Mode: 644\n" " Filename: /var/cache/debconf/templates.dat\n" #. type: SH #: debconf.conf.5:26 #, no-wrap msgid "FILE FORMAT" msgstr "FORMATO DEL FICHERO" #. type: Plain text #: debconf.conf.5:30 msgid "" "The format of this file is a series of stanzas, each separated by at least " "one wholly blank line. Comment lines beginning with a \"#\" character are " "ignored." msgstr "" "El formato de este fichero es una serie de definiciones separadas, como " "mínimo, por una línea vacía. Se ignoran las líneas de comentario que " "empiezan con «#»." #. type: Plain text #: debconf.conf.5:33 msgid "" "The first stanza of the file is special, is used to configure debconf as a " "whole. Two fields are required to be in this first stanza:" msgstr "" "La primera definición del fichero es especial, y se usa para configurar " "debconf al completo. Es necesario que haya dos campos en la primera " "definición:" #. type: TP #: debconf.conf.5:34 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:37 msgid "Specifies the name of the database from which to load config data." msgstr "" "Define el nombre de la base de datos desde la cual cargar los datos de " "configuración." #. type: TP #: debconf.conf.5:37 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:40 msgid "Specifies the name of the database to use for the template cache." msgstr "" "Define el nombre de la base de datos a usar para el almacén («caché») de " "plantillas." #. type: Plain text #: debconf.conf.5:43 msgid "Additional fields that can be used include:" msgstr "Los campos adicionales que se pueden usar incluyen:" #. type: TP #: debconf.conf.5:44 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:48 msgid "" "The frontend Debconf should use, overriding any frontend set in the debconf " "database." msgstr "" "La interfaz que Debconf debería usar, anulando cualquier interfaz definida " "en la base de datos de debconf." #. type: TP #: debconf.conf.5:48 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:52 msgid "" "The priority Debconf should use, overriding any priority set in the debconf " "database." msgstr "" "La prioridad que Debconf debería usar, anulando cualquier prioridad definida " "en la base de datos de debconf." #. type: TP #: debconf.conf.5:52 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:59 msgid "" "The email address Debconf should send mail to if it needs to make sure that " "the admin has seen an important message. Defaults to \"root\", but can be " "set to any valid email address to send the mail there. If you prefer to " "never have debconf send you mail, specify a blank address. This can be " "overridden on the fly with the DEBCONF_ADMIN_EMAIL environment variable." msgstr "" "La dirección de correo electrónico al que Debconf debería enviar un correo " "para asegurar que el administrador ve un mensaje de importancia. El valor " "predefinido es «root», pero puede definir cualquier dirección de correo " "electrónico válido al que enviar el correo. Si desea que debconf nunca le " "mande un correo, deje un espacio en blanco en lugar de una dirección. Esto " "se puede anular en el momento con la variable de entorno " "«DEBCONF_ADMIN_EMAIL»." #. type: Plain text #: debconf.conf.5:59 debconf.conf.5:395 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:67 msgid "" "If set, this will cause debconf to output debugging information to standard " "error. The value it is set to can be something like \"user\", \"developer\", " "\"db\", or a regular expression. Typically, rather than setting it " "permanently in a config file, you will only want to temporarily turn on " "debugging, and the DEBCONF_DEBUG environment variable can be set instead to " "accomplish that." msgstr "" "Si se define, hará que debconf muestre información de depuración a través de " "la salida de error estándar. El valor con el que se define puede ser algo " "como «user», «developer», «db» o una expresión regular. Habitualmente, " "querrá activar la depuración sólo ocasionalmente en lugar de definirlo " "permanentemente en el fichero de configuración. Para ello puede definir la " "variable de entorno «DEBCONF_DEBUG»." #. type: TP #: debconf.conf.5:67 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:72 msgid "" "If set, this will make debconf not display warnings about various things. " "This can be overridden on the fly with the DEBCONF_NOWARNINGS environment " "variable." msgstr "" "Si se define, evitará que debconf muestre avisos relacionados con varios " "eventos. Puede anular esto en el momento con la variable de entorno " "«DEBCONF_NOWARNINGS»." #. type: TP #: debconf.conf.5:72 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:77 msgid "" "Makes debconf log debugging information as it runs, to the syslog. The value " "it is set to controls that is logged. See Debug, above for an explanation of " "the values that can be set to control what is logged." msgstr "" "Hace que debconf registre la información de depuración en el registro del " "sistema («syslog») durante la ejecución. El valor con el que se define " "controla qué se registra. Consulte «Debug», más arriba, para una explicación " "de los valores que se pueden definir para controlar lo que se registra." #. type: TP #: debconf.conf.5:77 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:82 msgid "" "If set to \"true\", makes some debconf frontends use a special terse display " "mode that outputs as little as possible. Defaults to false. Terse mode may " "be temporarily set via the DEBCONF_TERSE environment variable." msgstr "" "Si se define con «true» (verdadero), hará que algunas interfaces de debconf " "usen un modo conciso («terse») que muestra en la salida la mínima " "información posible. «false» por omisión. El modo conciso se puede activar " "temporalmente mediante la variable de entorno «DEBCONF_TERSE»." #. type: Plain text #: debconf.conf.5:87 #, no-wrap msgid "" "For example, the first stanza of a file might look like this:\n" " Config: configdb\n" " Templates: templatedb\n" msgstr "" "Por ejemplo, la primera definición de un fichero puede tener este aspecto:\n" " Config: configuración-base-de-datos\n" " Templates: base-de-datos-de-plantillas\n" #. type: Plain text #: debconf.conf.5:91 #, no-wrap msgid "" "Each remaining stanza in the file sets up a database. A database stanza\n" "begins by naming the database:\n" " Name: configdb\n" msgstr "" "Cada definición restante en el fichero configura una base de datos. Una\n" "definición de una base de datos empieza denominando la base de datos:\n" " Name: configuración-base-de-datos\n" #. type: Plain text #: debconf.conf.5:95 #, no-wrap msgid "" "Then it indicates what database driver should be used for this database.\n" "See DRIVERS, below, for information about what drivers are available.\n" " Driver: File\n" msgstr "" "Después, se indica el controlador que se debería usar para esta base de\n" "datos. Consulte «CONTROLADORES», más abajo, para información acerca de los\n" "controladores disponibles.\n" " Driver: File\n" #. type: Plain text #: debconf.conf.5:100 #, no-wrap msgid "" "You can indicate that the database is not essential to the proper\n" "functioning of debconf by saying it is not required. This will make debconf\n" "muddle on if the database fails for some reason.\n" " Required: false\n" msgstr "" "Puede indicar que la base de datos no es esencial para el correcto\n" "funcionamiento de debconf indicando que no es obligatorio. Esto\n" "hará que debconf prosiga en el caso de que la base de datos falle.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:104 #, no-wrap msgid "" "You can mark any database as readonly and debconf will not write anything\n" "to it.\n" " Readonly: true\n" msgstr "" "Puede marcar la base de datos como de sólo lectura, y debconf no escribirá\n" "nada en él.\n" " Readonly: true\n" #. type: Plain text #: debconf.conf.5:107 msgid "" "You can also limit what types of data can go into the database with Accept- " "and Reject- lines; see ACCESS CONTROLS, below." msgstr "" "También puede limitar el tipo de datos que pueden entrar en la base de datos " "con las líneas «Accept-» y «Reject-»; consulte más abajo la sección " "«CONTROLES DE ACCESO»." #. type: Plain text #: debconf.conf.5:112 #, no-wrap msgid "" "The remainder of each database stanza is used to provide configuration\n" "specific to that driver. For example, the Text driver needs to know\n" "a directory to put the database in, so you might say:\n" " Filename: /var/cache/debconf/config.dat\n" msgstr "" "El resto de la definición de cada base de datos se usará para proporcionar\n" "información específica de ese controlador. Por ejemplo, el controlador\n" "«Text» necesita conocer el directorio donde alojar\n" "la base de datos, así que podría usar:\n" " Filename: /var/cache/debconf/config.dat\n" #. type: SH #: debconf.conf.5:112 #, no-wrap msgid "DRIVERS" msgstr "CONTROLADORES" #. type: Plain text #: debconf.conf.5:119 msgid "" "A number of drivers are available, and more can be written with little " "difficulty. Drivers come in two general types. First there are real drivers " "-- drivers that actually access and store data in some kind of database, " "which might be on the local filesystem, or on a remote system. Then there " "are meta-drivers that combine other drivers together to form more " "interesting systems. Let's start with the former." msgstr "" "Dispone de un gran número de controladores («drivers»), y puede escribir más " "con poca dificultad. Los controladores son de dos tipos generales. Primero " "están los controladores reales; controladores que acceden y guardan datos de " "forma directa en algún tipo de base de datos, el cual puede estar en el " "sistema de ficheros actual o en un sistema remoto. Después están los " "metacontroladores, que combinan otros controladores para así crear sistemas " "más interesantes. Vamos a empezar con el primero." #. type: TP #: debconf.conf.5:120 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:127 msgid "" "This database driver allows debconf to store a whole database in a single " "flat text file. This makes it easy to archive, transfer between machines, " "and edit. It is one of the more compact database formats in terms of disk " "space used. It is also one of the slowest." msgstr "" "Este controlador de base de datos permite que debconf guarde una base de " "datos completa en un único fichero de texto simple. Esto facilita su " "archivado, transferencia entre máquinas y edición. Es uno de los formatos de " "base de datos más compacto en términos del espacio en disco que usa. También " "es uno de los más lentos." #. type: Plain text #: debconf.conf.5:130 msgid "" "On the downside, the entire file has to be read in each time debconf starts " "up, and saving it is also slow." msgstr "" "La desventaja es que el fichero se tiene que leer por completo cada vez que " "debconf arranca, y el acto de guardar también es lento." #. type: Plain text #: debconf.conf.5:132 debconf.conf.5:168 debconf.conf.5:238 debconf.conf.5:309 msgid "The following things are configurable for this driver." msgstr "Puede configurar las siguientes opciones de este controlador." #. type: TP #: debconf.conf.5:133 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:136 msgid "The file to use as the database. This is a required field." msgstr "El fichero a usar como base de datos. Este campo es obligatorio." #. type: TP #: debconf.conf.5:136 debconf.conf.5:203 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:140 msgid "" "The permissions to create the file with if it does not exist. Defaults to " "600, since the file could contain passwords in some circumstances." msgstr "" "Los permisos a otorgar al fichero en caso de que no existe. El valor por " "omisión es 600, ya que en algunos casos el fichero puede contener " "contraseñas." #. type: TP #: debconf.conf.5:140 debconf.conf.5:176 debconf.conf.5:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 msgid "" "The format of the file. See FORMATS below. Defaults to using a rfc-822 like " "format." msgstr "" "El formato del fichero. Consulte «FORMATOS» más abajo. El valor por omisión " "es un formato tipo rfc-822." #. type: Plain text #: debconf.conf.5:144 debconf.conf.5:180 debconf.conf.5:371 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:148 debconf.conf.5:184 msgid "" "Whether a backup should be made of the old file before changing it. " "Defaults to true." msgstr "" "Si se debería crear una copia de respaldo del fichero antiguo antes de " "modificarlo. «true» por omisión." #. type: Plain text #: debconf.conf.5:151 debconf.conf.5:187 debconf.conf.5:209 msgid "As example stanza setting up a database using this driver:" msgstr "" "Una definición de ejemplo configurando una base de datos con este " "controlador:" #. type: Plain text #: debconf.conf.5:155 #, no-wrap msgid "" " Name: mydb\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" msgstr "" " Name: mi-base-de-datos\n" " Driver: File\n" " Filename: /var/cache/debconf/mydb.dat\n" #. type: TP #: debconf.conf.5:156 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:166 msgid "" "This database driver allows debconf to store data in a hierarchical " "directory structure. The names of the various debconf templates and " "questions are used as-is to form directories with files in them. This format " "for the database is the easiest to browse and fiddle with by hand. It has " "very good load and save speeds. It also typically occupies the most space, " "since a lot of small files and subdirectories do take up some additional " "room." msgstr "" "Este controlador de base de datos permite a debconf guardar datos en una " "estructura jerárquica de directorios. Los nombres de las diferentes " "plantillas de debconf y preguntas se usan literalmente para crear los " "directorios que contienen ficheros. El formato de esta base de datos es la " "más fácil de explorar y manipular directamente. Tiene una gran velocidad de " "carga y guardado de datos. Habitualmente, es el que ocupa más espacio, ya " "que varios ficheros pequeños y subdirectorios toman un espacio adicional." #. type: TP #: debconf.conf.5:169 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:172 msgid "The directory to put the files in. Required." msgstr "El directorio donde guardar los ficheros. Obligatorio." #. type: TP #: debconf.conf.5:172 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:176 msgid "" "An extension to add to the names of files. Must be set to a non-empty " "string; defaults to \".dat\"" msgstr "" "La extensión a añadir a los nombres de fichero. Se debe definir con una " "cadena no vacía: «.dat» por omisión." #. type: Plain text #: debconf.conf.5:192 #, no-wrap msgid "" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" msgstr "" " Name: mi-base-de-datos\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/mydb\n" " Extension: .txt\n" #. type: TP #: debconf.conf.5:193 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:200 msgid "" "This database driver is a compromise between the File and DirTree databases. " "It uses a directory, in which there is (approximately) one file per package " "that uses debconf. This is fairly fast, while using little more room than " "the File database driver." msgstr "" "Este controlador de base de datos es un arreglo entre las bases de datos " "«File» y «DirTree». Usa un directorio en el que hay, aproximadamente, un " "fichero por cada paquete que usa debconf. Es habitualmente rápido, aunque " "toma más espacio que el controlador de base de datos «File»." #. type: Plain text #: debconf.conf.5:203 msgid "" "This driver is configurable in the same ways as is the DirTree driver, plus:" msgstr "" "Este controlador se puede configurar de la misma forma que el controlador " "«DirTree», y también acepta lo siguiente:" #. type: Plain text #: debconf.conf.5:207 msgid "" "The permissions to create files with. Defaults to 600, since the files could " "contain passwords in some circumstances." msgstr "" "Los permisos a otorgar al fichero. El valor por omisión es 600, ya que en " "algunos casos los ficheros pueden contener contraseñas." #. type: Plain text #: debconf.conf.5:213 #, no-wrap msgid "" " Name: mydb\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" msgstr "" " Name: mi-base-de-datos\n" " Driver: PackageDir\n" " Directory: /var/cache/debconf/mydb\n" #. type: TP #: debconf.conf.5:214 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:218 msgid "" "WARNING: This database driver is currently experimental. Use with caution." msgstr "" "AVISO: Este controlador de base de datos está aún en una fase experimental. " "Usar con precaución." #. type: Plain text #: debconf.conf.5:226 msgid "" "This database driver accesses a LDAP directory for debconf configuration " "data. Due to the nature of the beast, LDAP directories should typically be " "accessed in read-only mode. This is because multiple accesses can take " "place, and it's generally better for data consistency if nobody tries to " "modify the data while this is happening. Of course, write access is " "supported for those cases where you do want to update the config data in the " "directory." msgstr "" "Este controlador de base de datos accede a un directorio LDAP para los datos " "de configuración de debconf. Debido a la naturaleza de la bestia, se debería " "acceder a directorios LDAP en modo de sólo lectura. Esto se debe a que puede " "que acceda varias veces simultáneamente, y es generalmente beneficioso para " "la consistencia de los datos si nadie intenta modificarlos mientras esto " "ocurre. Por supuesto, se permite el acceso para la escritura en aquellos " "casos en los que desea actualizar los datos de configuración en ese " "directorio." #. type: Plain text #: debconf.conf.5:229 msgid "" "For information about setting up a LDAP server for debconf, read /usr/share/" "doc/debconf-doc/README.LDAP (from the debconf-doc package)." msgstr "" "Para más información acerca de como configurar un servidor LDAP para " "debconf, consulte «/usr/share/doc/debconf-doc/README.LDAP», en el paquete " "debconf-doc." #. type: Plain text #: debconf.conf.5:232 msgid "" "To use this database driver, you must have the libnet-ldap-perl package " "installed. Debconf suggests that package, but does not depend on it." msgstr "" "Necesita instalar el paquete libnet-ldap-perl para usar este controlador de " "base de datos. Debconf sugiere ese paquete, pero no depende de él." #. type: Plain text #: debconf.conf.5:236 msgid "" "Please carefully consider the security implications of using a remote " "debconf database. Unless you trust the source, and you trust the intervening " "network, it is not a very safe thing to do." msgstr "" "Considere cuidadosamente las implicaciones de seguridad de usar una base de " "datos remota de debconf. No es algo muy seguro a menos que confíe en la " "fuente y la red mediadora." #. type: TP #: debconf.conf.5:239 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:242 msgid "The host name or IP address of an LDAP server to connect to." msgstr "" "El nombre de sistema o dirección IP de un servidor LDAP al que conectarse." #. type: TP #: debconf.conf.5:242 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:246 msgid "" "The port on which to connect to the LDAP server. If none is given, the " "default port is used." msgstr "" "El puerto con el que conectarse al servidor LDAP. Si no se proporciona " "ninguno, se usa el puerto predefinido." #. type: TP #: debconf.conf.5:246 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:251 msgid "" "The DN under which all config items will be stored. Each config item will be " "assumed to live in a DN of cn=Eitem nameE,EBase DNE. If this " "structure is not followed, all bets are off." msgstr "" "El nombre distinitivo (DN, «Distinguished name») bajo el cual se guardarán " "todos los elementos de configuración. Se supondrá que cada elemento de " "configuración se aloja en un DN tipo cn=Eelemento nombreE,EBase " "DNE. Si no sigue esta estructura, todo estará perdido." #. type: TP #: debconf.conf.5:251 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:255 msgid "" "The DN to bind to the directory as. Anonymous bind will be used if none is " "specified." msgstr "" "El DN con el que unirse («bind») con el directorio. Si no se define, se " "usará una unión anónima." #. type: TP #: debconf.conf.5:255 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:259 msgid "" "The password to use in an authenticated bind (used with binddn, above). If " "not specified, anonymous bind will be used." msgstr "" "La contraseña a usar en una unión identificada (usar con binddn, más " "arriba). Si no se define, se usará una unión anónima." #. type: Plain text #: debconf.conf.5:265 msgid "" "This option should not be used in the general case. Anonymous binding should " "be sufficient most of the time for read-only access. Specifying a bind DN " "and password should be reserved for the occasional case where you wish to " "update the debconf configuration data." msgstr "" "No se debería usar esta opción para el uso general. La unión anónima debería " "ser suficiente en la mayoría de los casos para el acceso de sólo lectura. " "Definir un DN de unión y contraseña se debería reservar para el caso " "ocasional en el que desea actualizar la configuración de los datos de " "debconf." #. type: TP #: debconf.conf.5:266 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:272 msgid "" "Enable access to individual LDAP entries, instead of fetching them all at " "once in the beginning. This is very useful if you want to monitor your LDAP " "logs for specific debconf keys requested. In this way, you could also write " "custom handling code on the LDAP server part." msgstr "" "Activa el acceso a entradas LDAP individuales, en lugar de obtenerlos todos " "a la vez al inicio. Esto es útil cuando desea supervisar los registros de " "LDAP para claves de debconf solicitadas explícitamente. De esta manera, " "también puede escribir código de control personalizado en la parte del " "servidor LDAP." #. type: Plain text #: debconf.conf.5:279 msgid "" "Note that when this option is enabled, the connection to the LDAP server is " "kept active during the whole Debconf run. This is a little different from " "the all-in-one behavior where two brief connections are made to LDAP; in the " "beginning to retrieve all the entries, and in the end to save eventual " "changes." msgstr "" "Tenga en cuenta que cuando esta opción está activada, la conexión con el " "servidor LDAP se mantiene activa durante la ejecución de Debconf. Es un poco " "diferente del comportamiento «all-in-one» (todo en uno) en el que se " "realizan dos breves conexiones a LDAP; una al principio para obtener todas " "las entradas, y otra al final para guardar cambios eventuales." #. type: Plain text #: debconf.conf.5:284 msgid "" "An example stanza setting up a database using this driver, assuming the " "remote database is on example.com and can be accessed anonymously:" msgstr "" "Esta es una definición de ejemplo que configura una base de datos usando " "este controlador, suponiendo que la base de datos remota está en «example." "com», y que permite el acceso anónimo:" #. type: Plain text #: debconf.conf.5:291 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" msgstr "" " Name: base-de-datos-ldap\n" " Driver: LDAP\n" " Readonly: true\n" " Server: example.com\n" " BaseDN: cn=debconf,dc=example,dc=com\n" " KeyByKey: 0\n" #. type: Plain text #: debconf.conf.5:294 msgid "" "Another example, this time the LDAP database is on localhost, and can be " "written to:" msgstr "" "Otro ejemplo, esta vez la base de datos LDAP está en el sistema local " "(«localhost»), y que permite su escritura:" #. type: Plain text #: debconf.conf.5:301 #, no-wrap msgid "" " Name: ldapdb\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" msgstr "" " Name: base-de-datos-ldap\n" " Driver: LDAP\n" " Server: localhost\n" " BaseDN: cn=debconf,dc=domain,dc=com\n" " BindPasswd: secret\n" " KeyByKey: 1\n" #. type: TP #: debconf.conf.5:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:307 msgid "" "This special-purpose database driver reads and writes the database from " "standard input/output. It may be useful for people with special needs." msgstr "" "Este controlador de base de datos de propósito especial permite leer y " "escribir la base de datos desde la entrada y salida estándar. Puede ser útil " "para las personas con necesidades especiales." #. type: Plain text #: debconf.conf.5:314 msgid "" "The format to read and write. See FORMATS below. Defaults to using a rfc-822 " "like format." msgstr "" "El formato en el que leer y escribir. Consulte «FORMATOS» a continuación. El " "valor por omisión es un formato tipo rfc-822." #. type: TP #: debconf.conf.5:314 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:318 msgid "" "File descriptor number to read from. Defaults to reading from stdin. If set " "to \"none\", the database will not read any data on startup." msgstr "" "El número del descriptor de fichero desde el que leer. Lee la entrada " "estándar por omisión. Si se define con «none» (ninguno), la base de datos no " "leerá ningún dato en el arranque." #. type: TP #: debconf.conf.5:318 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:322 msgid "" "File descriptor number to write to. Defaults to writing to stdout. If set to " "\"none\", the database will be thrown away on shutdown." msgstr "" "El número del descriptor de fichero al que escribir. Escribe por la salida " "estándar por omisión. Si se define con «none» (ninguno), la base de datos se " "desechará al apagar." #. type: Plain text #: debconf.conf.5:326 msgid "That's all of the real drivers, now moving on to meta-drivers.." msgstr "" "Estos son todos los controladores reales, pasemos ahora a los " "metacontroladores." #. type: TP #: debconf.conf.5:326 debconf.conf.5:354 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:335 msgid "" "This driver stacks up a number of other databases (of any type), and allows " "them to be accessed as one. When debconf asks for a value, the first " "database on the stack that contains the value returns it. If debconf writes " "something to the database, the write normally goes to the first driver on " "the stack that has the item debconf is modifying, and if none do, the new " "item is added to the first writable database on the stack." msgstr "" "Este controlador apila un número de bases de datos de cualquier tipo, y " "permite el acceso como si fuesen una única base de datos. Cuando debconf " "solicita un valor, la primera base de datos en la pila que contiene el valor " "lo devuelve. Si debconf escribe en la base de datos, lo escrito, " "generalmente, se guarda en el primer controlador de la pila que contiene el " "elemento que debconf está modificando, y si ninguno lo tiene, el elemento " "nuevo se añade a la primera base de datos en la pila que permita su " "escritura." #. type: Plain text #: debconf.conf.5:343 msgid "" "Things become more interesting if one of the databases on the stack is " "readonly. Consider a stack of the databases foo, bar, and baz, where foo and " "baz are both readonly. Debconf wants to change an item, and this item is " "only present in baz, which is readonly. The stack driver is smart enough to " "realize that won't work, and it will copy the item from baz to bar, and the " "write will take place in bar. Now the item in baz is shadowed by the item in " "bar, and it will not longer be visible to debconf." msgstr "" "La cosa se pone más interesante si una de las bases de datos de la pila es " "de sólo lectura. Suponga una pila de bases de datos foo, bar y baz, donde " "foo y baz son de sólo lectura. Debconf desea modificar un elemento, y este " "elemento sólo está presente en baz, de sólo lectura. El controlador «stack» " "es suficientemente inteligente como para darse cuenta de que no funcionará, " "y copiará el elemento de baz a bar, donde tomará lugar la escritura. Ahora " "el elemento en baz está oculto por el elemento en bar, y ya nunca será " "visible para debconf." #. type: Plain text #: debconf.conf.5:350 msgid "" "This kind of thing is particularly useful if you want to point many systems " "at a central, readonly database, while still allowing things to be " "overridden on each system. When access controls are added to the picture, " "stacks allow you to do many other interesting things, like redirect all " "passwords to one database while a database underneath it handles everything " "else." msgstr "" "Este tipo de cosas son particularmente útiles cuando desea que muchos " "sistemas se relacionen con una base de datos central de sólo lectura, a la " "vez que permite que ciertas cosas sean anuladas en cada sistema. Cuando " "añade los controles de acceso al dibujo, las pilas permiten hacer otras " "cosas interesantes, como redirigir todas las contraseñas a una sola base de " "datos, mientras que otra base de datos inferior en la pila gestiona todo lo " "demás." #. type: Plain text #: debconf.conf.5:352 msgid "Only one piece of configuration is needed to set up a stack:" msgstr "Sólo se necesita un elemento de configuración para crear una pila:" #. type: Plain text #: debconf.conf.5:358 msgid "" "This is where you specify a list of other databases, by name, to tell it " "what makes up the stack." msgstr "" "Aquí es donde define la lista de bases de datos por nombre, para indicar qué " "compone la pila." #. type: Plain text #: debconf.conf.5:361 debconf.conf.5:387 msgid "For example:" msgstr "Por ejemplo:" #. type: Plain text #: debconf.conf.5:365 #, no-wrap msgid "" " Name: megadb\n" " Driver: stack\n" " Stack: passworddb, configdb, companydb\n" msgstr "" " Name: mega-base-de-datos\n" " Driver: stack\n" " Stack: contraseña-base-de-datos, configuración-base-de-datos compañía-base-de-datos\n" #. type: Plain text #: debconf.conf.5:368 msgid "" "WARNING: The stack driver is not very well tested yet. Use at your own risk." msgstr "" "AVISO: El controlador «stack» aún no está bien comprobado. Utilice bajo su " "propio riesgo." #. type: Plain text #: debconf.conf.5:374 msgid "" "This driver passes all requests on to another database driver. But it also " "copies all write requests to a backup database driver." msgstr "" "Este controlador introduce todas las peticiones a otro controlador de base " "de datos. Pero también copia todas las peticiones de escritura a un " "controlador de base de datos de respaldo." #. type: Plain text #: debconf.conf.5:376 debconf.conf.5:400 msgid "You must specify the following fields to set up this driver:" msgstr "Debe definir los siguientes campos para configurar este controlador:" #. type: TP #: debconf.conf.5:378 debconf.conf.5:402 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:381 debconf.conf.5:405 msgid "The database to read from and write to." msgstr "La base de datos desde la que leer y escribir." #. type: TP #: debconf.conf.5:381 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:384 msgid "The name of the database to send copies of writes to." msgstr "" "El nombre de la base de datos a la que enviar copias de los datos escritos." #. type: Plain text #: debconf.conf.5:392 #, no-wrap msgid "" " Name: backup\n" " Driver: Backup\n" " Db: mydb\n" " Backupdb: mybackupdb\n" msgstr "" " Name: respaldo\n" " Driver: Backup\n" " Db: mi-base-de-datos\n" " Backupdb: mi-base-de-datos-de-respaldo\n" #. type: Plain text #: debconf.conf.5:398 msgid "" "This driver passes all requests on to another database driver, outputting " "verbose debugging output about the request and the result." msgstr "" "Este controlador introduce todas las peticiones a otro controlador de base " "de datos, mostrando información detallada de depuración acerca de la " "solicitud y el resultado." #. type: SH #: debconf.conf.5:407 #, no-wrap msgid "ACCESS CONTROLS" msgstr "CONTROLES DE ACCESO" #. type: Plain text #: debconf.conf.5:411 msgid "" "When you set up a database, you can also use some fields to specify access " "controls. You can specify that a database only accepts passwords, for " "example, or make a database only accept things with \"foo\" in their name." msgstr "" "Cuando configura una base de datos, también puede usar algunos campos para " "definir los controles de acceso. Puede definir que una base de datos sólo " "acepte contraseñas, por ejemplo, o hacer que una base de datos sólo acepte " "elementos con «foo» en su nombre." #. type: TP #: debconf.conf.5:411 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:416 msgid "" "As was mentioned earlier, this access control, if set to \"true\", makes a " "database readonly. Debconf will read values from it, but will never write " "anything to it." msgstr "" "Tal y como se mencionó anteriormente, si se define este control de acceso " "como «true» hará que la base de datos sea de sólo lectura. Debconf leerá los " "valores de él, pero nunca escribirá nada." #. type: TP #: debconf.conf.5:416 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:422 msgid "" "The text in this field is a perl-compatible regular expression that is " "matched against the names of items as they are requested from the database. " "Only if an items name matches the regular expression, will the database " "allow debconf to access or modify it." msgstr "" "El texto en este campo es una expresión regular compatible con Perl que se " "compara con los nombres de elementos de la base de datos a medida que se " "solicitan. La base de datos sólo permitirá a debconf que lo acceda o " "modifique si el nombre del elemento coincide con la expresión regular." #. type: TP #: debconf.conf.5:422 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:426 msgid "" "Like Accept-Name, except any item name matching this regular expression will " "be rejected." msgstr "" "Igual que «Accept-Name», sólo que rechazará todo elemento cuyo nombre " "coincida con esta expresión regular." #. type: TP #: debconf.conf.5:426 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:431 msgid "" "Another regular expression, this matches against the type of the item that " "is being accessed. Only if the type matches the regex will access be granted." msgstr "" "Otra expresión regular. Se compara con el tipo del elemento al que se está " "accediendo. Sólo se permite el acceso si el tipo coincide con la expresión " "regular." #. type: TP #: debconf.conf.5:431 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.conf.5:435 msgid "" "Like Accept-Type, except any type matching this regular expression will be " "rejected." msgstr "" "Igual que «Accept-Type», sólo que se rechazará todo tipo que coincida con " "esta expresión regular." #. type: SH #: debconf.conf.5:435 #, no-wrap msgid "FORMATS" msgstr "FORMATOS" #. type: Plain text #: debconf.conf.5:439 msgid "" "Some of the database drivers use format modules to control the actual format " "in which the database is stored on disk. These formats are currently " "supported:" msgstr "" "Algunos de los controladores de base de datos usan módulos de formato para " "controlar el formato real en el que la base de datos se guarda en el disco. " "Estos son los formatos aceptados actualmente:" #. type: TP #: debconf.conf.5:439 #, no-wrap msgid "B<822>" msgstr "B<822>" #. type: Plain text #: debconf.conf.5:444 msgid "" "This is a file format loosely based upon the rfc-822 format for email " "message headers. Similar formats are used throughout Debian; in the dpkg " "status file, and so on." msgstr "" "Este es un formato de fichero vagamente basado en el formato rfc-822 para " "cabeceras de mensajes de correo electrónico. Se usan formatos similares en " "Debian; en el fichero de estado de dpkg y más." #. type: Plain text #: debconf.conf.5:446 msgid "Here is a more complicated example of a debconf.conf file." msgstr "Este es un ejemplo más complicado de un fichero «debconf.conf»." #. type: Plain text #: debconf.conf.5:452 #, no-wrap msgid "" " # This stanza is used for general debconf setup.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" msgstr "" " # Esta definición se usa para una configuración general\n" " # de debconf.\n" " Config: stack\n" " Templates: templates\n" " Log: developer\n" " Debug: developer\n" #. type: Plain text #: debconf.conf.5:457 #, no-wrap msgid "" " # This is my own local database.\n" " Name: mydb\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" msgstr "" " # Esta es mi propia base de datos.\n" " Name: mi-base-de-datos\n" " Driver: DirTree\n" " Directory: /var/cache/debconf/config\n" #. type: Plain text #: debconf.conf.5:469 #, no-wrap msgid "" " # This is another database that I use to hold\n" " # only X server configuration.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # It's sorta hard to work out what questions\n" " # belong to X; it should be using a deeper\n" " # tree structure so I could just match on ^X/\n" " # Oh well.\n" " Accept-Name: xserver|xfree86|xbase\n" msgstr "" " # Esta es otra base de datos que uso para contener\n" " # sólo la configuración del servidor X.\n" " Name: X\n" " Driver: File\n" " Filename: /etc/X11/debconf.dat\n" " Mode: 644\n" " # Es algo difícil descubrir qué preguntas pertenecen\n" " # a X; debería usar una estructura de árbol más\n" " # profunda para comparar sólo con ^X/\n" " # Pero bueno.\n" " Accept-Name: xserver|xfree86|xbase\n" #. type: Plain text #: debconf.conf.5:485 #, no-wrap msgid "" " # This is our company's global, read-only\n" " # (for me!) debconf database.\n" " Name: company\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # I don't want any passwords that might be\n" " # floating around in there.\n" " Reject-Type: password\n" " # If this db is not accessible for whatever\n" " # reason, carry on anyway.\n" " Required: false\n" msgstr "" " # Esta es la base de datos global de debconf de\n" " # sólo lectura (para mi) de nuestra compañía.\n" " Name: compañía\n" " Driver: LDAP\n" " Server: debconf.foo.com\n" " BaseDN: cn=debconf,dc=foo,dc=com\n" " BindDN: uid=admin,dc=foo,dc=com\n" " BindPasswd: secret\n" " Readonly: true\n" " # No deseo ninguna contraseña dando vueltas\n" " # por aquí.\n" " Reject-Type: password\n" " # Si no se puede acceder a esta base de datos,\n" " # continuar de todas formas.\n" " Required: false\n" #. type: Plain text #: debconf.conf.5:493 #, no-wrap msgid "" " # I use this database to hold\n" " # passwords safe and secure.\n" " Name: passwords\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" msgstr "" " # Uso esta base de datos para guardar\n" " # contraseñas de forma segura.\n" " Name: contraseñas\n" " Driver: File\n" " Filename: /etc/debconf/passwords\n" " Mode: 600\n" " Accept-Type: password\n" #. type: Plain text #: debconf.conf.5:506 #, no-wrap msgid "" " # Let's put them all together\n" " # in a database stack.\n" " Name: stack\n" " Driver: Stack\n" " Stack: passwords, X, mydb, company\n" " # So, all passwords go to the password database.\n" " # Most X configuration stuff goes to the X\n" " # database, and anything else goes to my main\n" " # database. Values are looked up in each of those\n" " # in turn, and if none has a particular value, it\n" " # is looked up in the company-wide LDAP database\n" " # (unless it's a password).\n" msgstr "" " # Vamos a guardarlas todas en una\n" " # pila de bases de datos.\n" " Name: stack\n" " Driver: Stack\n" " Stack: contraseñas, X, mi-base-de-datos, compañía\n" " # Por ello, todas las contraseñas van a la base de datos\n" " # de contraseñas. La mayoría de la configuración de\n" " # X está en la base de datos de X, y todo lo demás va a mi\n" " # base de datos principal. Los valores se buscan en cada\n" " # uno de estos, y si ninguno tiene un valor particular,\n" " # se comprueba en la base de datos LDAP de la compañía\n" " # (a menos que sea una contraseña).\n" #. type: Plain text #: debconf.conf.5:514 #, no-wrap msgid "" " # A database is also used to hold templates. We\n" " # don't need to make this as fancy.\n" " Name: templates\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" msgstr "" " # También se usa una base de datos para\n" " # guardar plantillas. Esto no tiene que ser muy complejo.\n" " Name: plantillas\n" " Driver: File\n" " Mode: 644\n" " Format: 822\n" " Filename: /var/cache/debconf/templates\n" #. type: SH #: debconf.conf.5:514 confmodule.3:22 #, no-wrap msgid "NOTES" msgstr "NOTAS" #. type: Plain text #: debconf.conf.5:517 msgid "" "If you use something like ${HOME} in this file, it will be replaced with the " "value of the named environment variable." msgstr "" "Si en este fichero usa algo parecido a «${HOME}», se reemplazará con el " "valor de la variable de entorno nombrada." #. type: Plain text #: debconf.conf.5:521 msgid "" "Environment variables can also be used to override the databases on the fly, " "see B(7)" msgstr "" "También puede usar variables de entorno para anular en el momento algo en " "las bases de datos, consulte B(7)" #. type: Plain text #: debconf.conf.5:524 msgid "" "The field names (the part of the line before the colon) is case-insensitive. " "The values, though, are case sensitive." msgstr "" "Los nombres de campo (la sección de la línea anterior a los dos puntos) no " "son sensibles a las mayúsculas y minúsculas. Sí lo son, sin embargo, los " "valores." #. type: SH #: debconf.conf.5:524 #, no-wrap msgid "PLANNED ENHANCEMENTS" msgstr "MEJORAS PREVISTAS" #. type: Plain text #: debconf.conf.5:533 msgid "" "More drivers and formats. Some ideas include: A SQL driver, with the " "capability to access a remote database. A DHCP driver, that makes available " "some special things like hostname, IP address, and DNS servers. A driver " "that pulls values out of public DNS records TXT fields. A format that is " "compatible with the output of cdebconf. An override driver, which can " "override the value field or flags of all requests that pass through it." msgstr "" "Más controladores y formatos. Algunas ideas incluyen: un controlador SQL, " "con la capacidad de acceder a una base de datos remota. Un controlador DHCP, " "que dé acceso a algunas cosas especiales como el nombre de sistema " "(«hostname»), la dirección IP y servidores DNS. Un controlador que obtenga " "valores de un registro público DNS con campos con formato TXT. Un formato " "compatible con la salida de cdebconf. Un controlador de anulación, que pueda " "anular el campo del valor u opciones de todas las peticiones que pasan a " "través de él." #. type: SH #: debconf.conf.5:533 #, no-wrap msgid "FILES" msgstr "FICHEROS" #. type: Plain text #: debconf.conf.5:535 msgid "/etc/debconf.conf" msgstr "/etc/debconf.conf" #. type: Plain text #: debconf.conf.5:537 msgid "~/.debconfrc" msgstr "~/.debconfrc" #. type: Plain text #: debconf.conf.5:539 msgid "B(7)" msgstr "B(7)" #. type: Plain text #: debconf.conf.5:540 confmodule.3:43 debconf.7:383 debconf-devel.7:969 msgid "Joey Hess Ejoeyh@debian.orgE" msgstr "Joey Hess Ejoeyh@debian.orgE" #. type: TH #: confmodule.3:1 #, no-wrap msgid "CONFMODULE" msgstr "CONFMODULE" #. type: Plain text #: confmodule.3:4 msgid "confmodule - communicate with Debian configuration system FrontEnd." msgstr "" "confmodule - Interfaz para comunicarse con el sistema de configuración de " "Debian." #. type: Plain text #: confmodule.3:12 #, no-wrap msgid "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" msgstr "" " #!/bin/sh -e\n" " . /usr/share/debconf/confmodule\n" " db_version 2.0\n" " db_capb 'backup'\n" " CAPB=$RET\n" " db_input 'foo/bar' || true\n" " db_go || true\n" #. type: Plain text #: confmodule.3:22 msgid "" "This is a library of shell functions that eases communication with Debian's " "configuration management system. It can communicate with a FrontEnd via the " "debconf protocol. The design is that each command in the protocol is " "represented by one function in this module. The functionname is the same as " "the command, except it is prefixed with \"db_\" and is lower-case. Call the " "function and pass in any parameters you want to follow the command. Any " "textual return code from the FrontEnd will be returned to you in the $RET " "variable, while the numeric return code from the FrontEnd will be returned " "as a return code (and so those return codes must be captured or ignored)." msgstr "" "Esta es una biblioteca de funciones de intérprete de órdenes que facilita la " "comunicación con el sistema de gestión de configuración de Debian. Se puede " "comunicar con una interfaz («FrontEnd») mediante el protocolo de debconf. El " "diseño es tal que cada orden en el protocolo se representa en este módulo " "con una función. El nombre de la función es igual que el de la orden, con la " "diferencia de que tiene el prefijo «db_» y que está en minúscula. Invoque la " "función e introduzca a continuación de la orden cualquier parámetro que " "desee. Todo el código textual de retorno de la interfaz le llegará en la " "variable «$RET», mientras que el código numérico de retorno de la interfaz " "se devolverá como código de retorno, posibilitando capturar o ignorar estos " "códigos de retorno." #. type: Plain text #: confmodule.3:29 #, no-wrap msgid "" "Once this library is loaded, any text you later output will go to standard\n" "error, rather than standard output. This is a good thing in general, because\n" "text sent to standard output is interpreted by the FrontEnd as commands. If\n" "you do want to send a command directly to the FrontEnd, you must output it\n" "to file descriptor 3, like this:\n" " echo GET foo/bar E&3\n" msgstr "" "Una vez que se haya cargado esta biblioteca, todo texto enviado por la\n" "salida irá a la salida de error estándar, en lugar de la salida estándar.\n" "En general, es bueno, ya que el texto enviado por la salida estándar será\n" "interpretado por la interfaz como una orden. Si desea enviar una orden\n" "directamente a la interfaz, deberá enviarlo como salida al descriptor de\n" "fichero 3, tal y como se muestra: echo GET foo/bar E&3\n" #. type: Plain text #: confmodule.3:36 msgid "" "The library checks to make sure it is actually speaking to a FrontEnd by " "examining the DEBIAN_HAS_FRONTEND variable. If it is set, a FrontEnd is " "assumed to be running. If not, the library turns into one, and runs a copy " "of the script that loaded the library connected to it. This means that if " "you source this library, you should do so very near to the top of your " "script, because everything before the sourcing of the library may well be " "run again." msgstr "" "La biblioteca comprueba que realmente se está comunicando con una interfaz " "examinando la variable «DEBIAN_HAS_FRONTEND». Si está definida, la interfaz " "supondrá que está en ejecución. En caso contrario, la biblioteca se " "convierte en una, y ejecuta una copia del script que ha cargado la " "biblioteca conectada a él. Esto es, si carga la biblioteca, tendría que " "hacerlo al principio del script ya que puede que se ejecute otra vez todo lo " "que aparezca antes de cargar la biblioteca." #. type: Plain text #: confmodule.3:42 msgid "" "B(7), B(8), B(8), " "debconf_specification in the debian-policy package" msgstr "" "B(7), B(8), B(8), " "«debconf_specification» en el paquete debian-policy" #. type: TH #: debconf.7:1 #, no-wrap msgid "DEBCONF" msgstr "DEBCONF" #. type: Plain text #: debconf.7:4 msgid "debconf - Debian package configuration system" msgstr "debconf - Sistema de configuración de paquetes de Debian" #. type: Plain text #: debconf.7:8 msgid "" "Debconf is a configuration system for Debian packages. There is a rarely-" "used command named debconf, documented in B(1)" msgstr "" "Debconf es un sistema de configuración para paquetes de Debian. Existe una " "orden raramente usada llamada debconf, documentada en B(1)" #. type: Plain text #: debconf.7:16 msgid "" "Debconf provides a consistent interface for configuring packages, allowing " "you to choose from several user interface frontends. It supports " "preconfiguring packages before they are installed, which allows large " "installs and upgrades to ask you for all the necessary information up front, " "and then go do the work while you do something else. It lets you, if you're " "in a hurry, skip over less important questions and information while " "installing a package (and revisit it later)." msgstr "" "Debconf ofrece una interfaz uniforme para la configuración de paquetes, que " "permite escoger entre varias interfaces de usuario. Es capaz de " "preconfigurar paquetes antes de la instalación, lo cual permite que grandes " "instalaciones y actualizaciones soliciten toda la información necesaria para " "su puesta a punto, para después proseguir la instalación mientras usted hace " "algo distinto. Le permite, si tiene prisa, omitir las preguntas e " "información de menor importancia al instalar un paquete, y verlas más tarde." #. type: SH #: debconf.7:16 #, no-wrap msgid "Preconfiguring packages" msgstr "Preconfigurar paquetes" #. type: Plain text #: debconf.7:22 msgid "" "Debconf can configure packages before they are even installed onto your " "system. This is useful because it lets all the questions the packages are " "going to ask be asked at the beginning of an install, so the rest of the " "install can proceed while you are away getting a cup of coffee." msgstr "" "Debconf puede configurar paquetes incluso antes de su instalación en su " "sistema. Es útil ya que permite que los paquetes realicen todas las " "preguntas al inicio de la instalación, de forma que la instalación pueda " "proceder mientras se toma una taza de café." #. type: Plain text #: debconf.7:27 msgid "" "If you use apt (version 0.5 or above), and you have apt-utils installed, " "each package apt installs will be automatically preconfigured. This is " "controlled via I" msgstr "" "Si usa apt (la versión 0.5 o posterior) y apt-utils está instalado, cada " "paquete que apt instale se preconfigurará automáticamente. Esto se controla " "mediante I." #. type: Plain text #: debconf.7:33 msgid "" "Sometimes you might want to preconfigure a package by hand, when you're not " "installing it with apt. You can use B(8) to do that, " "just pass it the filenames of the packages you want to preconfigure. You " "will need apt-utils installed for that to work." msgstr "" "A veces puede que desee preconfigurar un paquete directamente cuando no lo " "instala con apt. Para ello, puede usar B(8); simplemente " "introduzca los nombres de fichero de los paquetes que desea preconfigurar. " "Necesitará que apt-utils esté instalado para que funcione." #. type: SH #: debconf.7:33 #, no-wrap msgid "Reconfiguring packages" msgstr "Reconfigurar paquetes" #. type: Plain text #: debconf.7:40 msgid "" "Suppose you installed the package, and answered debconf's questions, but now " "that you've used it awhile, you realize you want to go back and change some " "of your answers. In the past, reinstalling a package was often the thing to " "do when you got in this situation, but when you reinstall the package, " "debconf seems to remember you have answered the questions, and doesn't ask " "them again (this is a feature)." msgstr "" "Suponga que ha instalado el paquete y que ha contestado a las preguntas de " "debconf, pero ya lleva un tiempo usándolo y se da cuenta de que desea volver " "atrás y cambiar alguna de sus respuestas. En el pasado, esta situación se " "solucionaba habitualmente instalando el paquete otra vez, pero cuando " "reinstala un paquete parece que debconf recuerda cómo contestó a las " "preguntas, y no las plantea otra vez (esto es una funcionalidad)." #. type: Plain text #: debconf.7:44 #, no-wrap msgid "" "Luckily, debconf makes it easy to reconfigure any package that uses it.\n" "Suppose you want to reconfigure debconf itself. Just run, as root:\n" " dpkg-reconfigure debconf\n" msgstr "" "Afortunadamente, debconf facilita reconfigurar cualquier paquete\n" "que hace uso de él.\n" "Suponga que desea reconfigurar precisamente debconf. Sencillamente,\n" "ejecute lo siguiente como administrador:\n" " dpkg-reconfigure debconf\n" #. type: Plain text #: debconf.7:49 msgid "" "This will ask all the questions you saw when debconf was first installed. " "It may ask you other questions as well, since it asks even low priority " "questions that may have been skipped when the package was installed. You " "can use it on any other package that uses debconf, as well." msgstr "" "Esto planteará todas las preguntas que vio la primera vez que instaló " "debconf. Puede que también le haga otras preguntas, ya que pregunta incluso " "las cuestiones con baja prioridad que se pueden haber omitido al instalar el " "paquete. Puede usar esta orden con cualquier otro paquete que también usa " "debconf." #. type: SH #: debconf.7:49 #, no-wrap msgid "Frontends" msgstr "Interfaces" #. type: Plain text #: debconf.7:53 msgid "" "One of debconf's unique features is that the interface it presents to you is " "only one of many, that can be swapped in at will. There are many debconf " "frontends available:" msgstr "" "Una de las características únicas de debconf es que la interfaz que le " "presenta es sólo una de entre varias posibles, que puede intercambiar como " "desee. Puede interactuar con debconf a través de varias interfaces:" #. type: TP #: debconf.7:53 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:60 msgid "" "The default frontend, this uses the B(1) or B(1) " "programs to display questions to you. It works in text mode." msgstr "" "La interfaz predefinida, que usa los programas B(1) o B(1) " "para mostrar las preguntas. Funciona en modo de texto." #. type: TP #: debconf.7:60 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:72 msgid "" "The most traditional frontend, this looks quite similar to how Debian " "configuration always has been: a series of questions, printed out at the " "console using plain text, and prompts done using the readline library. It " "even supports tab completion. The libterm-readline-gnu-perl package is " "strongly recommended if you chose to use this frontend; the default readline " "module does not support prompting with default values. At the minimum, " "you'll need the perl-modules package installed to use this frontend." msgstr "" "La interfaz más tradicional, que se parece a como siempre ha sido la " "configuración de Debian: una serie de preguntas mostradas por el intérprete " "de órdenes usando texto simple, y que realiza preguntas a través de la " "biblioteca readline. También acepta el completado automático con el " "tabulador. Recomendamos encarecidamente el paquete libterm-readline-gnu-perl " "si escoge usar esta interfaz; el módulo predefinido de readline no permite " "realizar preguntas con valores predefinidos especiales. Como mínimo, " "necesitará instalar el paquete perl-modules para usar esta interfaz." #. type: Plain text #: debconf.7:77 msgid "" "This frontend has some special hotkeys. Pageup (or ctrl-u) will go back to " "the previous question (if that is supported by the package that is using " "debconf), and pagedown (or ctrl-v) will skip forward to the next question." msgstr "" "Esta interfaz posee algunas teclas rápidas especiales. La tecla repág (o " "«Ctrl-u») volverá a la última pregunta (si es compatible con el paquete que " "usa debconf), y la tecla avpág (o «Ctrl-v») pasará a la siguiente pregunta." #. type: Plain text #: debconf.7:80 msgid "" "This is the best frontend for remote admin work over a slow connection, or " "for those who are comfortable with unix." msgstr "" "Esta es la mejor interfaz para tareas de administración remota a través de " "una conexión lenta, o para que aquellos que están cómodos con Unix." #. type: TP #: debconf.7:81 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:90 msgid "" "This is the anti-frontend. It never interacts with you at all, and makes the " "default answers be used for all questions. It might mail error messages to " "root, but that's it; otherwise it is completely silent and unobtrusive, a " "perfect frontend for automatic installs. If you are using this front-end, " "and require non-default answers to questions, you will need to preseed the " "debconf database; see the section below on Unattended Package Installation " "for more details." msgstr "" "Esta es la anti interfaz. Nunca interactúa con usted y acepta las respuestas " "predefinidas para todas las preguntas. Puede que envíe correos de error al " "administrador, pero eso es todo; por otra parte, es totalmente silenciosa y " "discreta, la interfaz perfecta para instalaciones automáticas. Si está " "usando esta interfaz y necesita respuestas no predefinidas para preguntas, " "tendrá que configurar previamente («preseed») la base de datos de debconf; " "para más información consulte la sección más abajo «Instalación desatendida " "de paquetes»." #. type: TP #: debconf.7:90 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:96 #, fuzzy #| msgid "" #| "This is a modern X GUI using the gtk and gnome libraries. Of course, it " #| "requires a valid DISPLAY to work; debconf will fall back to other " #| "frontends if it can't work. Note that this frontend requires you have the " #| "libgnome2-perl package installed." msgid "" "This is a modern X GUI using the gtk and gnome libraries. Of course, it " "requires a valid DISPLAY to work; debconf will fall back to other frontends " "if it can't work. Note that this frontend requires you have the libgtk3-perl " "package installed." msgstr "" "Esta es una moderna interfaz gráfica para X que usa Gtk y las bibliotecas de " "GNOME. Por supuesto, requiere una variable de entorno «DISPLAY» válida para " "su funcionamiento; debconf usará otras interfaces de forma predefinida si no " "funciona. Tenga en cuenta que necesita tener instalado el paquete libgnome2-" "perl." #. type: TP #: debconf.7:96 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:102 #, fuzzy #| msgid "" #| "This frontend provides a simple X GUI written with the Qt library. It " #| "fits well the KDE desktop. You of course need a DISPLAY to use this " #| "frontend and must install libqt-perl. The frontend will fall back to " #| "dialog if some of the prerequisites are not met." msgid "" "This frontend provides a modern X GUI based on the KDE Platform. You of " "course need a DISPLAY to use this frontend and you must install debconf-kde-" "helper package. The frontend will fall back to dialog if some of the " "prerequisites are not met." msgstr "" "Esta interfaz proporciona una sencilla interfaz de usuario para X creada " "utilizando la biblioteca QT. Se integra bien en el entorno de escritorio " "KDE. Por supuesto, necesita configurar «DISPLAY» para utilizar esta " "interfaz, e instalar libqt-perl. Si no se cumplen todos los requisitos, esta " "interfaz utilizará dialog de forma predefinida." #. type: TP #: debconf.7:102 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:110 msgid "" "This is for those fanatics who have to do everything in a text editor. It " "runs your editor on a file that looks something like a typical unix config " "file, and you edit the file to communicate with debconf. Debconf's author " "prefers to not comment regarding the circumstances that led to this frontend " "being written." msgstr "" "Esto es para aquellos fanáticos que tienen que hacer todo lo posible con un " "editor de texto. Ejecuta su editor en un fichero similar a un fichero de " "configuración típico de Unix, y puede editar el fichero para comunicarse con " "debconf. Los autores de debconf prefieren no hacer comentarios sobre las " "circunstancias que llevaron a escribir esta interfaz." #. type: TP #: debconf.7:110 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:120 msgid "" "This frontend acts as a web server, that you connect to with your web " "browser, to browse the questions and answer them. It has a lot of promise, " "but is a little rough so far. When this frontend starts up, it will print " "out the location you should point your web browser to. You have to run the " "web browser on the same machine you are configuring, for security reasons." msgstr "" "Esta interfaz actúa como un servidor web al que se conecta con su navegador " "de internet para explorar y responder a las preguntas. Es muy prometedor " "aunque por ahora un tanto inacabado. Al iniciarse, mostrará la ubicación a " "la que debería apuntar su navegador web. Por razones de seguridad, tendrá " "que ejecutar el navegador en la misma máquina que está configurando." #. type: Plain text #: debconf.7:126 msgid "" "Do keep in mind that this is not a very secure frontend. Anyone who has " "access to the computer being configured can currently access the web server " "and configure things while this frontend is running. So this is more of a " "proof of concept than anything." msgstr "" "Tenga en cuenta que no es una interfaz muy segura. Cualquier persona con " "acceso al sistema que se está configurando puede acceder al servidor web y " "configurar cosas mientras se esté ejecutando esta interfaz. Esto es más una " "idea puesta en práctica que una funcionalidad acabada." #. type: Plain text #: debconf.7:133 #, no-wrap msgid "" "You can change the default frontend debconf uses by reconfiguring\n" "debconf. On the other hand, if you just want to change the frontend\n" "for a minute, you can set the DEBIAN_FRONTEND environment variable to\n" "the name of the frontend to use. For example:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" msgstr "" "Puede cambiar la interfaz que usa debconf reconfigurando debconf.\n" "Por otra parte, si desea cambiar la interfaz sólo por un momento\n" "puede definir la variable de entorno «DEBIAN_FRONTEND» con el\n" "nombre de la interfaz a usar. Por ejemplo:\n" " DEBIAN_FRONTEND=readline apt-get install slrn\n" #. type: Plain text #: debconf.7:141 msgid "" "The B(8) and B(8) commands also let " "you pass I<--frontend=> to them, followed by the frontend you want them to " "use." msgstr "" "Las órdenes B(8) y B(8) aceptan la " "opción I<--frontend=>, seguida de la interfaz que desea que usen." #. type: Plain text #: debconf.7:145 msgid "" "Note that not all frontends will work in all circumstances. If a frontend " "fails to start up for some reason, debconf will print out a message " "explaining why, and fall back to the next-most similar frontend." msgstr "" "Tenga en cuenta que no todas las interfaces funcionan en todas las " "situaciones. Si una interfaz falla al iniciarse por cualquier razón, debconf " "mostrará un mensaje que explica la razón y usará la siguiente interfaz más " "parecida." #. type: SH #: debconf.7:145 #, no-wrap msgid "Priorities" msgstr "Prioridades" #. type: Plain text #: debconf.7:152 msgid "" "Another nice feature of debconf is that the questions it asks you are " "prioritized. If you don't want to be bothered about every little thing, you " "can set up debconf to only ask you the most important questions. On the " "other hand, if you are a control freak, you can make it show you all " "questions. Each question has a priority. In increasing order of importance:" msgstr "" "Otra característica interesante de debconf es que prioriza las preguntas que " "se le hacen. Si no desea ser molestado por cada pequeña cuestión puede " "configurar debconf para que sólo plantee las preguntas más importantes. Por " "otra parte, si es un obseso del control puede hacer que muestre todas las " "preguntas. Cada pregunta tiene una prioridad. En orden creciente de " "importancia:" #. type: TP #: debconf.7:152 debconf-devel.7:294 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:156 msgid "" "Very trivial questions that have defaults that will work in the vast " "majority of cases." msgstr "" "Preguntas muy triviales con valores predefinidos que funcionarán en la gran " "mayoría de los casos." #. type: TP #: debconf.7:156 debconf-devel.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:159 msgid "Normal questions that have reasonable defaults." msgstr "Preguntas normales con unos valores predefinidos razonables." #. type: TP #: debconf.7:159 debconf-devel.7:301 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:162 msgid "Questions that don't have a reasonable default." msgstr "Preguntas que no tienen un valor predefinido razonable." #. type: TP #: debconf.7:162 debconf-devel.7:304 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:165 msgid "Questions that you really, really need to see (or else)." msgstr "Las preguntas que realmente, de verdad, necesita ver." #. type: Plain text #: debconf.7:175 msgid "" "Only questions with a priority equal to or greater than the priority you " "choose will be shown to you. You can set the priority value by reconfiguring " "debconf, or temporarily by passing I<--priority=> followed by the value to " "the B(8) and B(8) commands, or by " "setting the DEBIAN_PRIORITY environment variable." msgstr "" "Sólo se le mostrarán las preguntas con una prioridad igual o superior a la " "prioridad que seleccione. Puede definir el valor de la prioridad " "reconfigurando debconf, introduciendo temporalmente I<--priority=> seguido " "del valor a las órdenes B(8) y B(8), o " "definiendo la variable de entorno «DEBIAN_PRIORITY»." #. type: SH #: debconf.7:175 #, no-wrap msgid "Backend Database" msgstr "Sistema de la base de datos" #. type: Plain text #: debconf.7:187 msgid "" "Debconf uses a rather flexible and potentially complicated backend database " "for storing data such as the answers to questions. The file B is used to configure this database. If you need to set up something " "complicated, like make debconf read a remote database to get defaults, with " "local overrides, read the B(5) man page for all the gory " "details. Generally, the backend database is located in B ." msgstr "" "Debconf usa un sistema de base de datos muy flexible y potencialmente " "complicado para almacenar datos tales como las respuestas a las preguntas. " "El fichero B sirve para configurar esta base de datos. Si " "necesita configurar algo complicado, como hacer que debconf lea una base de " "datos remota para obtener los valores predefinidos, introduciendo cambios " "locales, lea la página de manual B(5) para todos los detalles " "específicos. Habitualmente, el sistema de la base de datos se encuentra en " "B." #. type: SH #: debconf.7:187 #, no-wrap msgid "Unattended Package Installation" msgstr "Instalación desatendida de paquetes" #. type: Plain text #: debconf.7:194 msgid "" "If you have many machines to manage you will sometimes find yourself in the " "position of needing to perform an unattended installation or upgrade of " "packages on many systems, when the default answers to some configuration " "questions are not acceptable. There are many ways to approach this; all " "involve setting up a database and making debconf use it to get the answers " "you want." msgstr "" "Si gestiona varios sistemas, a veces tendrá la necesidad de realizar una " "instalación o actualización desatendida de paquetes en varios sistemas, " "incluyendo cuando las respuestas predefinidas a algunas preguntas de " "configuración no sean aceptables. Existen varias formas de abordar esto; " "todas implican la creación de una base de datos y hacer que debconf use las " "respuestas que desea." #. type: Plain text #: debconf.7:198 msgid "" "You should really read B(5) before this section, as you need " "to understand how debconf's databases work." msgstr "" "Recomendamos que lea B(5) antes de leer esta sección, ya que " "tiene que entender el funcionamiento de las bases de datos de debconf." #. type: Plain text #: debconf.7:205 msgid "" "The easiest way to set up the database is to install the packages on one " "machine and answer their questions as usual. Or you might just use B(8) to configure a set of packages without actually installing " "them. Or you might even decide to write a plain text debconf database by " "hand or something." msgstr "" "La forma más sencilla de configurar la base de datos es instalar los " "paquetes en un sistema y responder a las preguntas de la forma habitual, o " "puede usar B(8) para configurar un conjunto de paquetes " "sin instalarlos realmente. También puede decidir escribir una base de datos " "de debconf a mano o algo así." #. type: Plain text #: debconf.7:209 msgid "" "Once you have the database, you need to figure out how to make the remote " "systems use it. This depends of course on the configuration of those systems " "and what database types they are set up to use." msgstr "" "Una vez que tiene la base de datos, tendrá que averiguar cómo hacer que los " "sistemas remotos lo usen. Por supuesto, esto depende de la configuración de " "esos sistemas y de los tipos de base de datos para los que están " "configurados." #. type: Plain text #: debconf.7:213 msgid "" "If you are using the LDAP debconf database, an entire network of debian " "machines can also have any or all package installation questions answered " "automatically by a single LDAP server." msgstr "" "Si está usando la base de datos LDAP de debconf, puede responder a las " "preguntas de instalación de paquetes para toda una red de sistemas Debian " "con un sólo servidor LDAP." #. type: Plain text #: debconf.7:222 msgid "" "But perhaps you're using something a little bit easier to set up like, say, " "the default debconf database configuration, or you just don't want your " "remote systems to use LDAP all the time. In this case the best approach is " "to temporarily configure the remote systems to stack your database " "underneath their own existing databases, so they pull default values out of " "it. Debconf offers two environment variables, DEBCONF_DB_FALLBACK and " "DEBCONF_DB_OVERRIDE, to make it easy to do this on the fly. Here is a sample " "use:" msgstr "" "Pero puede que esté usando algo más sencillo de configurar que, por ejemplo, " "la configuración predefinida de la base de datos debconf, o sencillamente no " "desea que sus sistemas remotos usen LDAP todo el tiempo. En este caso, el " "mejor enfoque es configurar temporalmente los sistemas remotos para que " "apilen («stack») su base de datos debajo de sus bases de datos existentes de " "forma que obtengan de éste los valores predefinidos. Debconf ofrece dos " "variables de entorno, «DEBCONF_DB_FALLBACK» y «DEBCONF_DB_OVERRIDE» para " "facilitar realizar esto en el momento. Éste es un ejemplo de uso:" #. type: Plain text #: debconf.7:226 #, no-wrap msgid "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" msgstr "" " cat /var/cache/debconf/config.dat | \\e\n" " ssh root@target \"DEBIAN_FRONTEND=noninteractive \\e\n" " DEBCONF_DB_FALLBACK=Pipe apt-get upgrade\"\n" #. type: Plain text #: debconf.7:232 msgid "" "This makes the debconf on the remote host read in the data that is piped " "across the ssh connection and interpret it as a plain text format debconf " "database. It then uses that database as a fallback database -- a read-only " "database that is queried for answers to questions if the system's main " "debconf database lacks answers." msgstr "" "Esto hace que el sistema debconf en el sistema remoto lea los datos " "introducidos a través de la conexión ssh, interpretándolo como un formato de " "texto simple de base de datos de debconf. A continuación, usa esa base de " "datos como una base de datos alternativa; una base de datos de sólo lectura " "que se consulta para obtener las respuestas a preguntas en el caso de que la " "base de datos de debconf principal del sistema no tenga respuestas." #. type: Plain text #: debconf.7:234 msgid "Here's another way to use the DEBCONF_DB_FALLBACK environment variable:" msgstr "" "Aquí tiene otra forma de usar la variable de entorno «DEBCONF_DB_FALLBACK»:" #. type: Plain text #: debconf.7:237 #, no-wrap msgid "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" msgstr "" " ssh -R 389:ldap:389 root@target \\e\n" " \t\"DEBCONF_DB_FALLBACK='LDAP{host:localhost}' apt-get upgrade\"\n" #. type: Plain text #: debconf.7:242 msgid "" "Here ssh is used to set up a tunneled LDAP connection and run debconf. " "Debconf is told to use the LDAP server as the fallback database. Note the " "use of \"{host:localhost}\" to configure how debconf accesses the LDAP " "database by providing the \"host\" field with a value of \"localhost\"." msgstr "" "En este caso, se usa una conexión ssh para configurar una conexión LDAP y " "para ejecutar debconf. Se dice a Debconf que use el servidor LDAP como la " "base de datos alternativa. Observe el uso de «{host:localhost}» para " "configurar la forma en que debconf accede a la base de datos LDAP " "proporcionando el campo «host» con un valor de «localhost»." #. type: Plain text #: debconf.7:244 msgid "Here's another method:" msgstr "Éste es otro método:" #. type: Plain text #: debconf.7:247 #, no-wrap msgid "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" msgstr "" " scp config.dat root@target:\n" " ssh root@target \"DEBCONF_DB_FALLBACK='File{/root/config.dat}' apt-get upgrade\n" #. type: Plain text #: debconf.7:252 msgid "" "Here you copy the database over with scp, and then ssh over and make debconf " "use the file you copied over. This illustrates a shorthand you can use in " "the DEBCONF_DB_FALLBACK parameters -- if a field name is left off, it " "defaults to \"filename\"." msgstr "" "En este caso, se copia la base de datos a través de scp, y después a través " "de ssh, haciendo que debconf use el fichero copiado. Esto ilustra una forma " "abreviada que puede usar como parámetro de «DEBCONF_DB_FALLBACK». Si no se " "rellena un nombre de campo, el valor predefinido es «filename»." #. type: Plain text #: debconf.7:261 msgid "" "There is only one problem with these uses of the DEBCONF_DB_FALLBACK " "parameter: While the fallback database can provide answers to questions the " "other debconf databases have never seen, it is only queried as a fallback; " "after the other databases. If you need to instead temporarily override an " "existing value on the remote host, you should instead use the " "DEBCONF_DB_OVERRIDE variable. Like DEBCONF_DB_FALLBACK, it sets up a " "temporary database, but this database is consulted before any others, and " "can be used to override existing values." msgstr "" "Sólo existe un problema al usar el parámetro «DEBCONF_DB_FALLBACK» de esta " "forma: mientras que la base de datos alternativa puede proporcionar las " "respuestas a preguntas que las otras bases de datos de debconf nunca han " "visto, sólo se consulta después de consultar las otras bases de datos. Si " "desea anular de forma temporal un valor existente en el sistema remoto " "debería usar la variable «DEBCONF_DB_OVERRIDE». Al igual que " "«DEBCONF_DB_FALLBACK», configura una base de datos temporal, pero esta base " "de datos se consulta antes que las demás y se puede usar para anular valores " "existentes." #. type: SH #: debconf.7:261 #, no-wrap msgid "Developing for Debconf" msgstr "Desarrollar con Debconf" #. type: Plain text #: debconf.7:266 msgid "" "Package developers and others who want to develop packages that use debconf " "should read B(7) ." msgstr "" "Los desarrolladores de paquetes y otros que deseen desarrollar paquetes que " "usan debconf deberían leer B(7)." #. type: Plain text #: debconf.7:274 msgid "" "Briefly, debconf communicates with maintainer scripts or other programs via " "standard input and output, using a simple line-oriented command language " "similar to that used by common internet protocols such as SMTP. Programs use " "this protocol to ask debconf to display questions to the user, and retrieve " "the user's answers. The questions themselves are defined in a separate file, " "called the \"templates file\", which has a format not unlike a debian " "control file." msgstr "" "Resumiendo, debconf se comunica con los scripts del desarrollador u otros " "programas a través de la entrada y salida estándar usando un lenguaje " "parecido a la línea de órdenes similar a los usados por protocolos de " "Internet comunes, tales como SMTP. Los programas usan este protocolo para " "hacer que debconf muestre preguntas al usuario, y obtener sus respuestas. " "Las preguntas en sí se definen en un fichero separado, llamado el «fichero " "de plantillas», el cual tiene un formato similar al fichero de control de " "Debian." #. type: Plain text #: debconf.7:278 msgid "" "Debian packages which use debconf typically provide both a templates file " "and a \"config\" script (run to preconfigure the package) in the control " "metadata section of the package." msgstr "" "Habitualmente, los paquetes de Debian que usan debconf proporcionan un " "fichero de plantillas y un script de configuración (que se ejecuta para " "preconfigurar el paquete) en la sección de metadatos de control del paquete." #. type: SH #: debconf.7:278 #, no-wrap msgid "ENVIRONMENT" msgstr "VARIABLES DE ENTORNO" #. type: TP #: debconf.7:279 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:282 msgid "Used to temporarily change the frontend debconf uses. See above." msgstr "" "Se usa para cambiar temporalmente la interfaz de debconf. Consulte más " "arriba." #. type: TP #: debconf.7:282 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:286 msgid "" "Used to temporarily change the minimum priority of question debconf will " "display. See above." msgstr "" "Se usa para cambiar temporalmente la prioridad mínima de la pregunta que " "debconf mostrará. Consulte más arriba." #. type: TP #: debconf.7:286 debconf-devel.7:576 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:292 msgid "" "Turns on debugging output on standard error. May be set to a facility name " "or a regular expression which matches a facility name (such as '.*' to " "output all debug info). The facility names include:" msgstr "" "Activa la salida de mensajes de depuración a través de la salida de error " "estándar. Se puede definir con el nombre de una utilidad («facility») o una " "expresión regular que coincide con el nombre de una función (como «.*» para " "mostrar toda la información de depuración). Los nombres de utilidad incluyen:" #. type: TP #: debconf.7:292 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:295 msgid "Debugging info of interest to a debconf user." msgstr "Información de depuración de interés para un usuario de debconf." #. type: TP #: debconf.7:295 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:298 msgid "Debugging info of interest to a package developer." msgstr "" "Información de depuración de interés para un desarrollador de paquetes." #. type: TP #: debconf.7:298 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:301 msgid "Debugging info about the backend database." msgstr "Información de depuración del sistema de base de datos." #. type: TP #: debconf.7:302 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:306 msgid "" "Set to \"yes\" to disable some warnings that debconf may display. Does not " "suppress display of fatal errors." msgstr "" "Se define con «yes» para desactivar algunos avisos que debconf puede " "mostrar. No suprime mostrar los errores fatales." #. type: TP #: debconf.7:306 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:310 msgid "" "Set to \"yes\" to enable terse mode, in which debconf frontends cut down on " "the verbiage as much as possible." msgstr "" "Se define con «yes» para activar el modo conciso, en el cual las interfaces " "de debconf reducen la verbosidad tanto como es posible." #. type: TP #: debconf.7:310 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:320 msgid "" "Stack a database after the normally used databases, so that it is used as a " "fallback to get configuration information from. See \"Unattended Package " "Installation\" above. If the value of the variable is the name of an " "existing database in debconf.conf, then that database will be used. " "Otherwise, the environment variable can be used to configure a database on " "the fly, by telling the type of database, and optionally passing field:value " "settings, inside curly braces after the type. Spaces are used to separate " "fields, so you cannot specify a field value containing whitespace." msgstr "" "Apila («stack») una base de datos después de las bases de datos usadas " "habitualmente, de forma que se usa como una alternativa de dónde obtener la " "información de configuración. Consulte «Instalación desatendida de " "paquetes», más arriba. Si el valor de la variable es el nombre de una base " "de datos existente en «debconf.conf», se usará esa base de datos. De no ser " "así, la variable de entorno se puede usar para configurar una base de datos " "en el momento, diciendo el tipo de base datos e introduciendo de forma " "opcional las opciones «campo:valor» entre corchetes, {}, después del tipo de " "base de datos. Los campos se separan con espacios, y por ello no puede " "definir un valor de campo que tenga espacios en blanco." #. type: Plain text #: debconf.7:323 #, no-wrap msgid "" "Thus, this uses the fallbackdb in debconf.conf:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" msgstr "" "Por lo tanto, esto usa «fallbackdb» en «debconf.conf»:\n" " DEBCONF_DB_FALLBACK=fallbackdb\n" #. type: Plain text #: debconf.7:327 #, no-wrap msgid "" "While this sets up a new database of type File, and tells it a filename to\n" "use and turns off backups:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" msgstr "" "Mientras que esto configura una base de datos nueva de tipo «File»,\n" "y le dice el nombre de fichero a usar, desactivando las copias de\n" "respaldo:\n" " DEBCONF_DB_FALLBACK=File{Filename:/root/config.dat Backup:no}\n" #. type: Plain text #: debconf.7:330 #, no-wrap msgid "" "And as a shorthand, this sets up a database of type File with a filename:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" msgstr "" "Y de forma abreviada, esto configura una base de datos de tipo «File» con\n" "un nombre de fichero:\n" " DEBCONF_DB_FALLBACK=File{/root/config.dat}\n" #. type: Plain text #: debconf.7:333 msgid "" "Note that if a fallback database is set up on the fly, it will be read-only " "by default." msgstr "" "Observe que una base de datos alternativa se configura en el momento, y por " "omisión es de sólo lectura." #. type: TP #: debconf.7:333 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:338 msgid "" "Stack a database before the normally used databases, so that it can override " "values from them. The value of the variable works the same as does the value " "of DEBCONF_DB_FALLBACK." msgstr "" "Apila una base de datos sobre las bases de datos usadas habitualmente, de " "forma que anula los valores contenidos en éstos. El valor de la variable " "funciona de la misma forma que el valor de «DEBCONF_DB_FALLBACK»." #. type: TP #: debconf.7:338 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:343 msgid "" "Use a given database instead of the normally used databases. This may be " "useful for testing with a separate database without having to create a " "separate debconf.conf, or to avoid locking the normal databases." msgstr "" "Usa una base de datos dada en lugar de las bases de datos usadas " "habitualmente. Puede ser útil para realizar pruebas con una base de datos " "separada sin la necesidad de crear un fichero «debconf.conf» independiente, " "o para evitar el bloqueo de las bases de datos normales." #. type: TP #: debconf.7:343 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:349 msgid "" "If this environment variable is set, debconf will ignore a user's ~/." "debconfrc file, and use the system one instead. If it is set to the name of " "a regular file, debconf will use that file in preference to the system " "configuration files." msgstr "" "Si se define esta variable de entorno, debconf omitirá el fichero de usuario " "«~/.debconfrc» y usará en su lugar el del sistema. Si se define con el " "nombre de un fichero normal, debconf usará ese fichero en lugar de los " "ficheros de configuración del sistema." #. type: TP #: debconf.7:349 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:353 msgid "" "If this environment variable is set, debconf will use dialog in preference " "to whiptail for the dialog frontend." msgstr "" "Si se define esta variable de entorno, debconf utilizará dialog en lugar de " "whiptail como la interfaz de diálogo de debconf." #. type: TP #: debconf.7:353 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:357 msgid "" "If this environment variable is set, debconf will use Xdialog in preference " "to whiptail for the dialog frontend." msgstr "" "Si se define esta variable de entorno, debconf utilizará Xdialog en lugar de " "whiptail como la interfaz de diálogo." #. type: TP #: debconf.7:357 #, no-wrap msgid "B" msgstr "B" #. type: Plain text #: debconf.7:361 msgid "" "Set to \"true\" to cause the seen flag to be set for questions asked in the " "noninteractive frontend." msgstr "" "Se define con «true» para provocar que la marca «seen» se establezca en las " "preguntas planteadas en la interfaz no interactiva." #. type: SH #: debconf.7:361 #, no-wrap msgid "BUGS" msgstr "FALLOS" #. type: Plain text #: debconf.7:363 msgid "Probably quite a few, there's a lot of code here." msgstr "Posiblemente varios, este programa tiene mucho código." #. type: Plain text #: debconf.7:365 msgid "" "If you do file a bug report, be sure to include the following information:" msgstr "" "Si remite un informe de fallo, asegúrese de incluir la siguiente información:" #. type: TP #: debconf.7:365 debconf.7:368 debconf.7:371 debconf-devel.7:469 #: debconf-devel.7:473 debconf-devel.7:479 debconf-devel.7:484 #: debconf-devel.7:489 #, no-wrap msgid "B<*>" msgstr "B<*>" #. type: Plain text #: debconf.7:368 msgid "The debconf frontend you were using when the problem occurred" msgstr "" "La interfaz de debconf que estaba usando cuando se detectó el problema." #. type: Plain text #: debconf.7:371 msgid "What you did to trigger the problem." msgstr "Qué hizo para desencadenar el problema." #. type: Plain text #: debconf.7:376 msgid "" "The full text of any error messages. If you can reproduce the bug, do so " "with DEBCONF_DEBUG='.*' set and exported. This speeds up debugging a lot." msgstr "" "El texto completo de cualquier mensaje de error. Si puede reproducir el " "fallo, hágalo con «DEBCONF_DEBUG='.*' » definido («set») y exportado " "(«export»). Esto agiliza mucho la depuración." #. type: Plain text #: debconf.7:382 msgid "" "B(5), B(7), B(8), B(8), B(1)," msgstr "" "B(5), B(7), B(8), B(8), B(1)," #. type: TH #: debconf-devel.7:1 #, no-wrap msgid "DEBCONF-DEVEL" msgstr "DEBCONF-DEVEL" #. type: Plain text #: debconf-devel.7:4 msgid "debconf - developers guide" msgstr "debconf - Guía del desarrollador" #. type: Plain text #: debconf-devel.7:6 msgid "This is a guide for developing packages that use debconf." msgstr "Esta es una guía para el desarrollo de paquetes que usan debconf." #. type: Plain text #: debconf-devel.7:9 msgid "" "This manual assumes that you are familiar with debconf as a user, and are " "familiar with the basics of debian package construction." msgstr "" "Este manual asume que está familiarizado con debconf como usuario, y que " "conoce los conceptos básicos de la construcción de paquetes debian." #. type: Plain text #: debconf-devel.7:18 msgid "" "This manual begins by explaining two new files that are added to debian " "packages that use debconf. Then it explains how the debconf protocol works, " "and points you at some libraries that will let your programs speak the " "protocol. It discusses other maintainer scripts that debconf is typically " "used in: the postinst and postrm scripts. Then moves on to more advanced " "topics like shared debconf templates, debugging, and some common techniques " "and pitfalls of programming with debconf. It closes with a discussion of " "debconf's current shortcomings." msgstr "" "Este manual comienza explicando dos nuevos ficheros que se añaden a paquetes " "debian que usan debconf. A continuación, explica cómo funciona el protocolo " "de debconf, y señala las bibliotecas que permitirán que sus programas hablen " "tal protocolo. Se discuten otros scripts de desarrollador que habitualmente " "usan debconf: los scripts postinst (postinstalación) y postrm " "(posteliminación). Continua con temas más avanzados como el sistema de " "plantillas compartidas de debconf, depuración de fallos, y algunas técnicas " "comunes y problemas a la hora de programar con debconf. Finaliza con un " "análisis de las deficiencias actuales de debconf." #. type: SH #: debconf-devel.7:18 #, no-wrap msgid "THE CONFIG SCRIPT" msgstr "EL SCRIPT CONFIG" #. type: Plain text #: debconf-devel.7:23 msgid "" "Debconf adds an additional maintainer script, the config script, to the set " "of maintainer scripts that can be in debian packages (the postinst, preinst, " "postrm, and prerm). The config script is responsible for asking any " "questions necessary to configure the package." msgstr "" "Debconf añade un script de desarrollador adicional, el script «config», al " "conjunto de scripts de desarrollador que pueden existir en paquetes debian " "(«postinst», «preinst», «postrm», y «prerm»). El script «config» es el " "responsable de plantear cualquier pregunta necesaria para la configuración " "del paquete." #. type: Plain text #: debconf-devel.7:28 msgid "" "Note: It is a little confusing that dpkg refers to running a package's " "postinst script as \"configuring\" the package, since a package that uses " "debconf is often fully pre-configured, by its config script, before the " "postinst ever runs. Oh well." msgstr "" "Nota: Es un poco confuso que dpkg se refiere a ejecutar el script «postinst» " "como la «configuración» del paquete, ya que, habitualmente, un paquete que " "usa debconf está totalmente preconfigurado mediante el script «config» antes " "de que se ejecute el script de postinstalación. Pero bueno." #. type: Plain text #: debconf-devel.7:34 msgid "" "Like the postinst, the config script is passed two parameters when it is " "run. The first tells what action is being performed, and the second is the " "version of the package that is currently installed. So, like in a postinst, " "you can use dpkg --compare-versions on $2 to make some behavior happen only " "on upgrade from a particular version of a package, and things like that." msgstr "" "Al igual que el script «postinst», el script «config» acepta dos parámetros " "cuando se ejecuta. El primero dice la acción que se está realizando, y el " "segundo la versión del paquete actualmente instalado. Por lo tanto, al igual " "que con un script «postinst», puede usar «dpkg --compare-versions» con «$2» " "para hacer que un comportamiento sólo aparezca durante la actualización a " "partir de una versión en particular, y otros comportamientos parecidos." #. type: Plain text #: debconf-devel.7:36 msgid "The config script can be run in one of three ways:" msgstr "El script «config» se puede ejecutar de tres formas distintas:" #. type: TP #: debconf-devel.7:36 #, no-wrap msgid "B<1>" msgstr "B<1>" #. type: Plain text #: debconf-devel.7:40 msgid "" "If a package is pre-configured, with dpkg-preconfigure, its config script is " "run, and is passed the parameters \"configure\", and installed-version." msgstr "" "Si el paquete está preconfigurado con «dpkg-preconfigure», se ejecuta el " "script «config» y se le introducen los parámetros «configure» y la versión " "instalada («installed-version»)." #. type: TP #: debconf-devel.7:40 #, no-wrap msgid "B<2>" msgstr "B<2>" #. type: Plain text #: debconf-devel.7:47 msgid "" "When a package's postinst is run, debconf will try to run the config script " "then too, and it will be passed the same parameters it was passed when it is " "pre-configured. This is necessary because the package might not have been " "pre-configured, and the config script still needs to get a chance to run. " "See HACKS for details." msgstr "" "Cuando se ejecuta el script «postinst» de un paquete debconf intentará " "ejecutar también el script «config», al que se le introducirán los mismos " "parámetros que se introducen cuando se preconfigura. Es necesario ya que " "puede que el paquete aún no se haya preconfigurado, y que el script «config» " "todavía necesite una oportunidad para ejecutarse. Para más detalles consulte " "«ARREGLOS»." #. type: TP #: debconf-devel.7:47 #, no-wrap msgid "B<3>" msgstr "B<3>" #. type: Plain text #: debconf-devel.7:52 msgid "" "If a package is reconfigured, with dpkg-reconfigure, its config script it " "run, and is passed the parameters \"reconfigure\" and installed-version." msgstr "" "Si el paquete se reconfigura con «dpkg-reconfigure», se ejecuta el script " "«config», y se le introducen los parámetros «reconfigure» y la versión " "instalada («installed-version»)." #. type: Plain text #: debconf-devel.7:58 msgid "" "Note that since a typical package install or upgrade using apt runs steps 1 " "and 2, the config script will typically be run twice. It should do nothing " "the second time (to ask questions twice in a row is annoying), and it should " "definitely be idempotent. Luckily, debconf avoids repeating questions by " "default, so this is generally easy to accomplish." msgstr "" "Tenga en cuenta que ya que una instalación o actualización típica de " "paquetes mediante apt ejecuta los pasos 1 y 2, el script «config» se " "ejecutará dos veces. No debería hacer nada (plantear las mismas preguntas " "dos veces seguidas es molesto), y debería ser idempotente. Afortunadamente, " "debconf evita repetir preguntas por omisión, así que esto es generalmente " "fácil de realizar." #. type: Plain text #: debconf-devel.7:64 msgid "" "Note that the config script is run before the package is unpacked. It should " "only use commands that are in essential packages. The only dependency of " "your package that is guaranteed to be met when its config script is run is a " "dependency (possibly versioned) on debconf itself." msgstr "" "Observe que el script «config» se ejecuta antes de desempaquetar el paquete. " "Sólo debería usar órdenes que están en los paquetes esenciales " "(«essential»). La única dependencia que su paquete tendrá de forma " "obligatoria al ejecutar el script «config» es el mismo debconf (posiblemente " "versionada)." #. type: Plain text #: debconf-devel.7:70 msgid "" "The config script should not need to modify the filesystem at all. It just " "examines the state of the system, and asks questions, and debconf stores the " "answers to be acted on later by the postinst script. Conversely, the " "postinst script should almost never use debconf to ask questions, but should " "instead act on the answers to questions asked by the config script." msgstr "" "El script «config» no debería necesitar modificar el sistema de ficheros de " "ninguna forma. Simplemente, examina el estado del sistema y plantea " "preguntas, y debconf guarda las respuestas para usarlas después a través del " "script «postinst». Por el contrario, el script «postinst» nunca debería usar " "debconf para plantear preguntas, sino que debería actuar en base a las " "respuestas a las preguntas planteadas por el script «config»." #. type: SH #: debconf-devel.7:70 #, no-wrap msgid "THE TEMPLATES FILE" msgstr "EL FICHERO DE PLANTILLAS" #. type: Plain text #: debconf-devel.7:73 msgid "" "A package that uses debconf probably wants to ask some questions. These " "questions are stored, in template form, in the templates file." msgstr "" "Probablemente, un paquete que usa debconf desea plantear algunas preguntas. " "Estas preguntas se guardan, en de plantilla, en el fichero de plantillas." #. type: Plain text #: debconf-devel.7:78 msgid "" "Like the config script, the templates file is put in the control.tar.gz " "section of a deb. Its format is similar to a debian control file; a set of " "stanzas separated by blank lines, with each stanza having a RFC822-like form:" msgstr "" "Al igual que el script «config», el fichero de plantillas se ubica en la " "sección «control.tar.gz» de un paquete «.deb». Su formato es similar al " "fichero de control de debian, un conjunto de definiciones separadas por " "líneas en blanco. Cada definición tiene una forma similar al formato RFC822:" #. type: Plain text #: debconf-devel.7:94 #, no-wrap msgid "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: This is a sample string question.\n" " This is its extended description.\n" " .\n" " Notice that:\n" " - Like in a debian package description, a dot\n" " on its own line sets off a new paragraph.\n" " - Most text is word-wrapped, but doubly-indented\n" " text is left alone, so you can use it for lists\n" " of items, like this list. Be careful, since\n" " it is not word-wrapped, if it's too wide\n" " it will look bad. Using it for short items\n" " is best (so this is a bad example).\n" msgstr "" " Template: foo/bar\n" " Type: string\n" " Default: foo\n" " Description: Este es un ejemplo de pregunta de tipo cadena.\n" " Esta es su descripción extendida.\n" " .\n" " Tenga en cuenta:\n" " - Al igual que en la descripción de un paquete debian,\n" " un punto en una línea vacía inicia un nuevo párrafo.\n" " - La mayoría del texto se justifica, pero el texto con\n" " doble sangrado no se modifica, así que puede usarlo\n" " para listas de elementos como esta lista. Tenga\n" " cuidado ya que no se justifica, y tendrá un pobre\n" " aspecto si es demasiado ancho. Es mejor usarlo con\n" " elementos cortos (y por ello éste es un mal ejemplo).\n" #. type: Plain text #: debconf-devel.7:99 #, no-wrap msgid "" " Template: foo/baz\n" " Type: boolean\n" " Description: Clear enough, no?\n" " This is another question, of boolean type.\n" msgstr "" " Template: foo/baz\n" " Type: boolean\n" " Description: Es obvio, ¿no?\n" " Esta es otra pregunta, de tipo booleano.\n" #. type: Plain text #: debconf-devel.7:103 msgid "" "For some real-life examples of templates files, see /var/lib/dpkg/info/" "debconf.templates, and other .templates files in that directory." msgstr "" "Si desea ver ejemplos de uso reales de ficheros de plantillas consulte «/var/" "lib/dpkg/info/debconf.templates» y otros ficheros «.templates» en ese " "directorio." #. type: Plain text #: debconf-devel.7:105 msgid "Let's look at each of the fields in turn.." msgstr "Ahora vamos a explicar cada uno de los campos." #. type: TP #: debconf-devel.7:105 #, no-wrap msgid "B