Debian Codegraph @

src/centreon/common/cisco/standard/snmp/mode/memoryflash.pm

raw
1 #
2 # Copyright 2024 Centreon (http://www.centreon.com/)
3 #
4 # Centreon is a full-fledged industry-strength solution that meets
5 # the needs in IT infrastructure and application monitoring for
6 # service performance.
7 #
8 # Licensed under the Apache License, Version 2.0 (the "License");
9 # you may not use this file except in compliance with the License.
10 # You may obtain a copy of the License at
11 #
12 # http://www.apache.org/licenses/LICENSE-2.0
13 #
14 # Unless required by applicable law or agreed to in writing, software
15 # distributed under the License is distributed on an "AS IS" BASIS,
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 # See the License for the specific language governing permissions and
18 # limitations under the License.
19 #
20
21 package centreon::common::cisco::standard::snmp::mode::memoryflash;
22
23 use base qw(centreon::plugins::templates::counter);
24
25 use strict;
26 use warnings;
27 use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc);
28
29 sub custom_status_output {
30 my ($self, %options) = @_;
31
32 my $msg = 'status : ' . $self->{result_values}->{status};
33 return $msg;
34 }
35
36 sub custom_mem_output {
37 my ($self, %options) = @_;
38
39 my $msg = sprintf("Total: %s %s Used: %s %s (%.2f%%) Free: %s %s (%.2f%%)",
40 $self->{perfdata}->change_bytes(value => $self->{result_values}->{total}),
41 $self->{perfdata}->change_bytes(value => $self->{result_values}->{used}),
42 $self->{result_values}->{prct_used},
43 $self->{perfdata}->change_bytes(value => $self->{result_values}->{free}),
44 $self->{result_values}->{prct_free});
45 return $msg;
46 }
47
48 sub set_counters {
49 my ($self, %options) = @_;
50
51 $self->{maps_counters_type} = [
52 { name => 'memory', type => 1, cb_prefix_output => 'prefix_memory_output', message_multiple => 'All memory flash partitions are ok', skipped_code => { -10 => 1 } }
53 ];
54
55 $self->{maps_counters}->{memory} = [
56 { label => 'status', threshold => 0, set => {
57 key_values => [ { name => 'status' }, { name => 'display' } ],
58 closure_custom_calc => \&catalog_status_calc,
59 closure_custom_output => $self->can('custom_status_output'),
60 closure_custom_perfdata => sub { return 0; },
61 closure_custom_threshold_check => \&catalog_status_threshold,
62 }
63 },
64 { label => 'usage', nlabel => 'memory.flash.usage.bytes', set => {
65 key_values => [ { name => 'used' }, { name => 'free' }, { name => 'prct_used' }, { name => 'prct_free' }, { name => 'total' }, { name => 'display' } ],
66 closure_custom_output => $self->can('custom_mem_output'),
67 perfdatas => [
68 { value => 'used', template => '%d', min => 0, max => 'total',
69 unit => 'B', cast_int => 1, label_extra_instance => 1, instance_use => 'display' },
70 ],
71 }
72 },
73 { label => 'usage-free', display_ok => 0, nlabel => 'memory.flash.free.bytes', set => {
74 key_values => [ { name => 'free' }, { name => 'used' }, { name => 'prct_used' }, { name => 'prct_free' }, { name => 'total' }, { name => 'display' } ],
75 closure_custom_output => $self->can('custom_mem_output'),
76 perfdatas => [
77 { value => 'free', template => '%d', min => 0, max => 'total',
78 unit => 'B', cast_int => 1, label_extra_instance => 1, instance_use => 'display' },
79 ],
80 }
81 },
82 { label => 'usage-prct', display_ok => 0, nlabel => 'memory.flash.usage.percentage', set => {
83 key_values => [ { name => 'prct_used' }, { name => 'display' } ],
84 output_template => 'Used : %.2f %%',
85 perfdatas => [
86 { value => 'prct_used', template => '%.2f', min => 0, max => 100, unit => '%',
87 label_extra_instance => 1, instance_use => 'display' },
88 ],
89 }
90 },
91 ];
92 }
93
94 sub new {
95 my ($class, %options) = @_;
96 my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
97 bless $self, $class;
98
99 $options{options}->add_options(arguments => {
100 'filter-name:s' => { name => 'filter_name' },
101 'unknown-status:s' => { name => 'unknown_status', default => '%{status} =~ /readOnly/i' },
102 'warning-status:s' => { name => 'warning_status', default => '' },
103 'critical-status:s' => { name => 'critical_status', default => '' },
104 });
105
106 return $self;
107 }
108
109 sub check_options {
110 my ($self, %options) = @_;
111 $self->SUPER::check_options(%options);
112
113 $self->change_macros(macros => ['warning_status', 'critical_status', 'unknown_status']);
114 }
115
116 sub prefix_memory_output {
117 my ($self, %options) = @_;
118
119 return "Partition '" . $options{instance_value}->{display} . "' ";
120 }
121
122 my $map_status = { 1 => 'readOnly', 2 => 'runFromFlash', 3 => 'readWrite' };
123
124 my $mapping = {
125 ciscoFlashPartitionSize => { oid => '.1.3.6.1.4.1.9.9.10.1.1.4.1.1.4' },
126 ciscoFlashPartitionFreeSpace => { oid => '.1.3.6.1.4.1.9.9.10.1.1.4.1.1.5' },
127 ciscoFlashPartitionStatus => { oid => '.1.3.6.1.4.1.9.9.10.1.1.4.1.1.8', map => $map_status },
128 ciscoFlashPartitionName => { oid => '.1.3.6.1.4.1.9.9.10.1.1.4.1.1.10' },
129 ciscoFlashPartitionSizeExtended => { oid => '.1.3.6.1.4.1.9.9.10.1.1.4.1.1.13' },
130 ciscoFlashPartitionFreeSpaceExtended => { oid => '.1.3.6.1.4.1.9.9.10.1.1.4.1.1.14' },
131 };
132
133 sub manage_selection {
134 my ($self, %options) = @_;
135
136 my $ciscoFlashPartitionEntry = '.1.3.6.1.4.1.9.9.10.1.1.4.1.1';
137 my $snmp_result = $options{snmp}->get_table(
138 oid => $ciscoFlashPartitionEntry,
139 nothing_quit => 1
140 );
141
142 $self->{memory} = {};
143 foreach my $oid (keys %$snmp_result) {
144 next if ($oid !~ /^$mapping->{ciscoFlashPartitionSize}->{oid}\.(.*)/);
145 my $instance = $1;
146 my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => $instance);
147 if (defined($self->{option_results}->{filter_name}) && $self->{option_results}->{filter_name} ne '' &&
148 $result->{ciscoFlashPartitionName} !~ /$self->{option_results}->{filter_name}/) {
149 $self->{output}->output_add(long_msg => "skipping '" . $result->{ciscoFlashPartitionName} . "': no matching filter.", debug => 1);
150 next;
151 }
152
153 my $total = $result->{ciscoFlashPartitionSize};
154 if (defined($result->{ciscoFlashPartitionSizeExtended})) {
155 $total = $result->{ciscoFlashPartitionSizeExtended};
156 }
157 my $free = $result->{ciscoFlashPartitionFreeSpace};
158 if (defined($result->{ciscoFlashPartitionFreeSpaceExtended})) {
159 $free = $result->{ciscoFlashPartitionFreeSpaceExtended};
160 }
161
162 my ($used, $prct_used, $prct_free);
163 if ($total > 0) {
164 $used = $total - $free;
165 $prct_used = $used * 100 / $total;
166 $prct_free = 100 - $prct_used;
167 }
168 $self->{memory}->{$instance} = {
169 display => $result->{ciscoFlashPartitionName},
170 status => $result->{ciscoFlashPartitionStatus},
171 free => $free,
172 used => $used,
173 prct_used => $prct_used,
174 prct_free => $prct_free,
175 total => $total,
176 };
177 }
178
179 if (scalar(keys %{$self->{memory}}) <= 0) {
180 $self->{output}->add_option_msg(short_msg => 'No flash memory found.');
181 $self->{output}->option_exit();
182 }
183 }
184
185 1;
186
187 __END__
188
189 =head1 MODE
190
191 Check memory flash usages.
192
193 =over 8
194
195 =item B<--unknown-status>
196
197 Define the conditions to match for the status to be UNKNOWN (default: '%{status} =~ /readOnly/i').
198 You can use the following variables: %{status}, %{display}
199
200 =item B<--warning-status>
201
202 Define the conditions to match for the status to be WARNING (default: '').
203 You can use the following variables: %{status}, %{display}
204
205 =item B<--critical-status>
206
207 Define the conditions to match for the status to be CRITICAL (default: '').
208 You can use the following variables: %{status}, %{display}
209
210 =item B<--warning-*> B<--critical-*>
211
212 Thresholds.
213 Can be: 'usage' (B), 'usage-free' (B), 'usage-prct' (%).
214
215 =item B<--filter-name>
216
217 Filter partition name (can be a regexp).
218
219 =back
220
221 =cut