Debian Codegraph @

src/centreon/common/cisco/standard/snmp/mode/cpu.pm

raw
1 #
2 # Copyright 2024 Centreon (http://www.centreon.com/)
3 #
4 # Centreon is a full-fledged industry-strength solution that meets
5 # the needs in IT infrastructure and application monitoring for
6 # service performance.
7 #
8 # Licensed under the Apache License, Version 2.0 (the "License");
9 # you may not use this file except in compliance with the License.
10 # You may obtain a copy of the License at
11 #
12 # http://www.apache.org/licenses/LICENSE-2.0
13 #
14 # Unless required by applicable law or agreed to in writing, software
15 # distributed under the License is distributed on an "AS IS" BASIS,
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 # See the License for the specific language governing permissions and
18 # limitations under the License.
19 #
20
21 package centreon::common::cisco::standard::snmp::mode::cpu;
22
23 use base qw(centreon::plugins::templates::counter);
24
25 use strict;
26 use warnings;
27
28 sub set_counters {
29 my ($self, %options) = @_;
30
31 $self->{maps_counters_type} = [
32 { name => 'cpu_avg', type => 0, cb_prefix_output => 'prefix_cpu_avg_output', message_separator => ' ', skipped_code => { -10 => 1 } },
33 { name => 'cpu_core', type => 1, cb_prefix_output => 'prefix_cpu_core_output', message_separator => ' ', message_multiple => 'All core cpu are ok', skipped_code => { -10 => 1 } }
34 ];
35
36 $self->{maps_counters}->{cpu_avg} = [
37 { label => 'average-5s', nlabel => 'cpu.utilization.5s.percentage', set => {
38 key_values => [ { name => 'average_5s' } ],
39 output_template => '%.2f %% (5s)',
40 perfdatas => [
41 { label => 'total_cpu_5s_avg', value => 'average_5s', template => '%.2f',
42 min => 0, max => 100, unit => '%' },
43 ],
44 }
45 },
46 { label => 'average-1m', nlabel => 'cpu.utilization.1m.percentage', set => {
47 key_values => [ { name => 'average_1m' } ],
48 output_template => '%.2f %% (1m)',
49 perfdatas => [
50 { label => 'total_cpu_1m_avg', value => 'average_1m', template => '%.2f',
51 min => 0, max => 100, unit => '%' },
52 ],
53 }
54 },
55 { label => 'average-5m', nlabel => 'cpu.utilization.5m.percentage', set => {
56 key_values => [ { name => 'average_5m' } ],
57 output_template => '%.2f %% (5m)',
58 perfdatas => [
59 { label => 'total_cpu_5m_avg', value => 'average_5m', template => '%.2f',
60 min => 0, max => 100, unit => '%' },
61 ],
62 }
63 },
64 ];
65
66 $self->{maps_counters}->{cpu_core} = [
67 { label => 'core-5s', nlabel => 'core.cpu.utilization.5s.percentage', set => {
68 key_values => [ { name => 'cpu_5s' }, { name => 'display' } ],
69 output_template => '%.2f %% (5s)',
70 perfdatas => [
71 { label => 'cpu_5s', value => 'cpu_5s', template => '%.2f',
72 min => 0, max => 100, unit => '%', label_extra_instance => 1, instance_use => 'display' },
73 ],
74 }
75 },
76 { label => 'core-1m', nlabel => 'core.cpu.utilization.1m.percentage', set => {
77 key_values => [ { name => 'cpu_1m' }, { name => 'display' } ],
78 output_template => '%.2f %% (1m)',
79 perfdatas => [
80 { label => 'cpu_1m', value => 'cpu_1m', template => '%.2f',
81 min => 0, max => 100, unit => '%', label_extra_instance => 1, instance_use => 'display' },
82 ],
83 }
84 },
85 { label => 'core-5m', nlabel => 'core.cpu.utilization.5m.percentage', set => {
86 key_values => [ { name => 'cpu_5m' }, { name => 'display' } ],
87 output_template => '%.2f %% (5m)',
88 perfdatas => [
89 { label => 'cpu_5m', value => 'cpu_5m', template => '%.2f',
90 min => 0, max => 100, unit => '%', label_extra_instance => 1, instance_use => 'display' },
91 ],
92 }
93 },
94 ];
95 }
96
97 sub prefix_cpu_avg_output {
98 my ($self, %options) = @_;
99
100 return $self->{cpu_avg}->{count} . " CPU(s) average usage is ";
101 }
102
103 sub prefix_cpu_core_output {
104 my ($self, %options) = @_;
105
106 return "CPU '" . $options{instance_value}->{display} . "' usage ";
107 }
108
109 sub new {
110 my ($class, %options) = @_;
111 my $self = $class->SUPER::new(package => __PACKAGE__, %options);
112 bless $self, $class;
113
114 $options{options}->add_options(arguments => {
115 'check-order:s' => { name => 'check_order', default => 'process,old_sys,system_ext' },
116 });
117
118 return $self;
119 }
120
121 sub check_nexus_cpu {
122 my ($self, %options) = @_;
123
124 return if (!defined($options{snmp_result}->{$options{oid} . '.0'}));
125
126 my $instance = 0;
127 $self->{cpu_core}->{$instance} = {
128 display => $instance,
129 cpu_5m => $options{snmp_result}->{$options{oid} . '.0'},
130 };
131
132 $self->{checked_cpu} = 1;
133 }
134
135 sub check_table_cpu {
136 my ($self, %options) = @_;
137
138 return if ($self->{checked_cpu} == 1);
139
140 my $instances = {};
141 foreach my $oid (keys %{$options{snmp_result}}) {
142 $oid =~ /\.([0-9]+)$/;
143 next if (defined($instances->{$1}));
144 $instances->{$1} = 1;
145 my $instance = $1;
146
147 my $cpu5sec = defined($options{snmp_result}->{$options{sec5} . '.' . $instance}) ? $options{snmp_result}->{$options{sec5} . '.' . $instance} : undef;
148 my $cpu1min = defined($options{snmp_result}->{$options{min1} . '.' . $instance}) ? $options{snmp_result}->{$options{min1} . '.' . $instance} : undef;
149 my $cpu5min = defined($options{snmp_result}->{$options{min5} . '.' . $instance}) ? $options{snmp_result}->{$options{min5} . '.' . $instance} : undef;
150
151 # Case that it's maybe other CPU oid in table for datas.
152 next if (!defined($cpu5sec) && !defined($cpu1min) && !defined($cpu5min));
153
154 $self->{checked_cpu} = 1;
155 $self->{cpu_core}->{$instance} = {
156 display => $instance,
157 cpu_5s => $cpu5sec,
158 cpu_1m => $cpu1min,
159 cpu_5m => $cpu5min,
160 };
161 }
162 }
163
164 sub check_cpu_average {
165 my ($self, %options) = @_;
166
167 my $count = scalar(keys %{$self->{cpu_core}});
168 my ($avg_5s, $avg_1m, $avg_5m);
169 foreach (values %{$self->{cpu_core}}) {
170 $avg_5s = defined($avg_5s) ? $avg_5s + $_->{cpu_5s} : $_->{cpu_5s}
171 if (defined($_->{cpu_5s}));
172 $avg_1m = defined($avg_1m) ? $avg_1m + $_->{cpu_1m} : $_->{cpu_1m}
173 if (defined($_->{cpu_1m}));
174 $avg_5m = defined($avg_5m) ? $avg_5m + $_->{cpu_5m} : $_->{cpu_5m}
175 if (defined($_->{cpu_5m}));
176 }
177
178 $self->{cpu_avg} = {
179 average_5s => defined($avg_5s) ? $avg_5s / $count : undef,
180 average_1m => defined($avg_1m) ? $avg_1m / $count : undef,
181 average_5m => defined($avg_5m) ? $avg_5m / $count : undef,
182 count => $count,
183 };
184 }
185
186 sub check_cpu_process {
187 my ($self, %options) = @_;
188
189 return if ($self->{checked_cpu} == 1);
190
191 # Cisco IOS Software releases later to 12.0(3)T and prior to 12.2(3.5)
192 my $oid_cpmCPUTotalEntry = '.1.3.6.1.4.1.9.9.109.1.1.1.1';
193 my $oid_cpmCPUTotal5sec = '.1.3.6.1.4.1.9.9.109.1.1.1.1.3';
194 my $oid_cpmCPUTotal1min = '.1.3.6.1.4.1.9.9.109.1.1.1.1.4';
195 my $oid_cpmCPUTotal5min = '.1.3.6.1.4.1.9.9.109.1.1.1.1.5';
196 # Cisco IOS Software releases 12.2(3.5) or later
197 my $oid_cpmCPUTotal5minRev = '.1.3.6.1.4.1.9.9.109.1.1.1.1.8';
198 my $oid_cpmCPUTotal1minRev = '.1.3.6.1.4.1.9.9.109.1.1.1.1.7';
199 my $oid_cpmCPUTotal5secRev = '.1.3.6.1.4.1.9.9.109.1.1.1.1.6';
200
201 my $snmp_result = $self->{snmp}->get_table(
202 oid => $oid_cpmCPUTotalEntry, start => $oid_cpmCPUTotal5sec, end => $oid_cpmCPUTotal5minRev
203 );
204 $self->check_table_cpu(snmp_result => $snmp_result, sec5 => $oid_cpmCPUTotal5secRev, min1 => $oid_cpmCPUTotal1minRev, min5 => $oid_cpmCPUTotal5minRev);
205 $self->check_table_cpu(snmp_result => $snmp_result, sec5 => $oid_cpmCPUTotal5sec, min1 => $oid_cpmCPUTotal1min, min5 => $oid_cpmCPUTotal5min);
206 }
207
208 sub check_cpu_old_sys {
209 my ($self, %options) = @_;
210
211 return if ($self->{checked_cpu} == 1);
212
213 # Cisco IOS Software releases prior to 12.0(3)T
214 my $oid_lcpu = '.1.3.6.1.4.1.9.2.1';
215 my $oid_busyPer = '.1.3.6.1.4.1.9.2.1.56'; # .0 in reality
216 my $oid_avgBusy1 = '.1.3.6.1.4.1.9.2.1.57'; # .0 in reality
217 my $oid_avgBusy5 = '.1.3.6.1.4.1.9.2.1.58'; # .0 in reality
218
219 my $snmp_result = $self->{snmp}->get_table(
220 oid => $oid_lcpu, start => $oid_busyPer, end => $oid_avgBusy5
221 );
222 $self->check_table_cpu(snmp_result => $snmp_result, sec5 => $oid_busyPer, min1 => $oid_avgBusy1, min5 => $oid_avgBusy5);
223 }
224
225 sub check_cpu_system_ext {
226 my ($self, %options) = @_;
227
228 return if ($self->{checked_cpu} == 1);
229
230 # Cisco Nexus
231 my $oid_cseSysCPUUtilization = '.1.3.6.1.4.1.9.9.305.1.1.1'; # .0 in reality
232 my $snmp_result = $self->{snmp}->get_table(
233 oid => $oid_cseSysCPUUtilization
234 );
235
236 $self->check_nexus_cpu(snmp_result => $snmp_result, oid => $oid_cseSysCPUUtilization);
237 }
238
239 sub manage_selection {
240 my ($self, %options) = @_;
241
242 $self->{snmp} = $options{snmp};
243 $self->{cpu_avg} = {};
244 $self->{cpu_core} = {};
245 $self->{checked_cpu} = 0;
246
247 foreach (split /,/, $self->{option_results}->{check_order}) {
248 my $method = $self->can('check_cpu_' . $_);
249 if ($method) {
250 $self->$method();
251 }
252 }
253
254 if ($self->{checked_cpu} == 0) {
255 $self->{output}->add_option_msg(short_msg => "Cannot find CPU informations");
256 $self->{output}->option_exit();
257 }
258
259 $self->check_cpu_average();
260 }
261
262 1;
263
264 __END__
265
266 =head1 MODE
267
268 Check CPU usage (CISCO-PROCESS-MIB and CISCO-SYSTEM-EXT-MIB).
269
270 =over 8
271
272 =item B<--check-order>
273
274 Check CPU in standard cisco mib. If you have some issue (wrong CPU information in a specific mib), you can change the order
275 (default: 'process,old_sys,system_ext').
276
277 =item B<--warning-*> B<--critical-*>
278
279 Thresholds.
280 Can be: 'core-5s', 'core-1m', 'core-5m', 'average-5s', 'average-1m', 'average-5m'.
281
282 =back
283
284 =cut