| 1 |
# |
| 2 |
# Copyright 2024 Centreon (http://www.centreon.com/) |
| 3 |
# |
| 4 |
# Centreon is a full-fledged industry-strength solution that meets |
| 5 |
# the needs in IT infrastructure and application monitoring for |
| 6 |
# service performance. |
| 7 |
# |
| 8 |
# Licensed under the Apache License, Version 2.0 (the "License"); |
| 9 |
# you may not use this file except in compliance with the License. |
| 10 |
# You may obtain a copy of the License at |
| 11 |
# |
| 12 |
# http://www.apache.org/licenses/LICENSE-2.0 |
| 13 |
# |
| 14 |
# Unless required by applicable law or agreed to in writing, software |
| 15 |
# distributed under the License is distributed on an "AS IS" BASIS, |
| 16 |
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 17 |
# See the License for the specific language governing permissions and |
| 18 |
# limitations under the License. |
| 19 |
# |
| 20 |
|
| 21 |
package centreon::common::cisco::standard::snmp::mode::ipsla; |
| 22 |
|
| 23 |
use base qw(centreon::plugins::templates::counter); |
| 24 |
|
| 25 |
use strict; |
| 26 |
use warnings; |
| 27 |
use Digest::MD5 qw(md5_hex); |
| 28 |
use Math::Complex; |
| 29 |
|
| 30 |
sub set_counters { |
| 31 |
my ($self, %options) = @_; |
| 32 |
|
| 33 |
$self->{maps_counters_type} = [ |
| 34 |
{ name => 'tag', type => 1, cb_prefix_output => 'prefix_tag_output', message_multiple => 'All RTT controls are ok', |
| 35 |
skipped_code => { -2 => 1, -3 => 1, -10 => 1 } } |
| 36 |
]; |
| 37 |
$self->{maps_counters}->{tag} = [ |
| 38 |
{ label => 'status', threshold => 0, set => { |
| 39 |
key_values => [ |
| 40 |
{ name => 'rttMonCtrlAdminStatus' }, |
| 41 |
{ name => 'rttMonCtrlAdminTag' }, |
| 42 |
{ name => 'rttMonCtrlAdminRttType' }, |
| 43 |
{ name => 'rttMonCtrlAdminThreshold' }, |
| 44 |
{ name => 'rttMonEchoAdminPrecision' }, |
| 45 |
{ name => 'rttMonLatestRttOperCompletionTime' }, |
| 46 |
{ name => 'rttMonLatestRttOperSense' }, |
| 47 |
{ name => 'rttMonLatestRttOperApplSpecificSense' }, |
| 48 |
], |
| 49 |
closure_custom_calc => $self->can('custom_status_calc'), |
| 50 |
closure_custom_output => $self->can('custom_status_output'), |
| 51 |
closure_custom_perfdata => sub { return 0; }, |
| 52 |
closure_custom_threshold_check => $self->can('custom_status_threshold'), |
| 53 |
} |
| 54 |
}, |
| 55 |
{ label => 'CompletionTime', set => { |
| 56 |
key_values => [ |
| 57 |
{ name => 'rttMonLatestRttOperCompletionTime' }, { name => 'rttMonEchoAdminPrecision' }, { name => 'rttMonCtrlAdminTag' } |
| 58 |
], |
| 59 |
output_template => 'Completion Time : %s', |
| 60 |
perfdatas => [ |
| 61 |
{ label => 'completion_time', value => 'rttMonLatestRttOperCompletionTime', template => '%s', |
| 62 |
min => 0, label_extra_instance => 1 }, |
| 63 |
], |
| 64 |
} |
| 65 |
}, |
| 66 |
{ label => 'NumberOverThresholds', set => { |
| 67 |
key_values => [ |
| 68 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 69 |
{ name => 'OverThresholds_1' }, { name => 'OverThresholds_2' }, { name => 'OverThresholds_times' }, |
| 70 |
], |
| 71 |
closure_custom_calc => $self->can('custom_NumberOverThresholds_calc'), |
| 72 |
closure_custom_output => $self->can('custom_generic_output'), |
| 73 |
output_template => 'Number Over Thresholds : %s', |
| 74 |
threshold_use => 'value', |
| 75 |
perfdatas => [ |
| 76 |
{ label => 'number_over_thresholds', value => 'value', template => '%s', |
| 77 |
label_extra_instance => 1 }, |
| 78 |
], |
| 79 |
} |
| 80 |
}, |
| 81 |
{ label => 'AverageDelaySD', set => { |
| 82 |
key_values => [ |
| 83 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 84 |
{ name => 'OWSumSD_1' }, { name => 'OWSumSD_2' }, { name => 'OWSumSD_times' }, |
| 85 |
{ name => 'NumOfOW_1' }, { name => 'NumOfOW_2' }, { name => 'NumOfOW_times' }, |
| 86 |
], |
| 87 |
closure_custom_calc => $self->can('custom_AverageDelaySD_calc'), |
| 88 |
closure_custom_output => $self->can('custom_generic_output'), |
| 89 |
output_template => 'Average Delay SD : %.2f ms', |
| 90 |
threshold_use => 'value', |
| 91 |
perfdatas => [ |
| 92 |
{ label => 'average_delay_sd', value => 'value', template => '%.2f', unit => 'ms', |
| 93 |
label_extra_instance => 1 }, |
| 94 |
], |
| 95 |
} |
| 96 |
}, |
| 97 |
{ label => 'AverageDelayDS', set => { |
| 98 |
key_values => [ { name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 99 |
{ name => 'OWSumDS_1' }, { name => 'OWSumDS_2' }, { name => 'OWSumDS_times' }, |
| 100 |
{ name => 'NumOfOW_1' }, { name => 'NumOfOW_2' }, { name => 'NumOfOW_times' }, |
| 101 |
], |
| 102 |
closure_custom_calc => $self->can('custom_AverageDelayDS_calc'), |
| 103 |
closure_custom_output => $self->can('custom_generic_output'), |
| 104 |
output_template => 'Average Delay DS : %.2f ms', |
| 105 |
threshold_use => 'value', |
| 106 |
perfdatas => [ |
| 107 |
{ label => 'average_delay_ds', value => 'value', template => '%.2f', unit => 'ms', |
| 108 |
label_extra_instance => 1 }, |
| 109 |
], |
| 110 |
} |
| 111 |
}, |
| 112 |
{ label => 'PacketLossRatio', set => { |
| 113 |
key_values => [ |
| 114 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 115 |
{ name => 'PacketLossDS_1' }, { name => 'PacketLossDS_2' }, { name => 'PacketLossDS_times' }, |
| 116 |
{ name => 'PacketLossSD_1' }, { name => 'PacketLossSD_2' }, { name => 'PacketLossSD_times' }, |
| 117 |
{ name => 'PacketMIA_1' }, { name => 'PacketMIA_2' }, { name => 'PacketMIA_times' }, |
| 118 |
{ name => 'PacketLateArrival_1' }, { name => 'PacketLateArrival_2' }, { name => 'PacketLateArrival_times' }, |
| 119 |
{ name => 'PacketOutOfSequence_1' }, { name => 'PacketOutOfSequence_2' }, { name => 'PacketOutOfSequence_times' }, |
| 120 |
{ name => 'NumOfRTT_1' }, { name => 'NumOfRTT_2' }, { name => 'NumOfRTT_times' }, |
| 121 |
], |
| 122 |
closure_custom_calc => $self->can('custom_PacketLossRatio_calc'), |
| 123 |
closure_custom_output => $self->can('custom_generic_output'), |
| 124 |
output_template => 'Packet Loss Ratio : %.2f %%', |
| 125 |
threshold_use => 'value', |
| 126 |
perfdatas => [ |
| 127 |
{ label => 'packet_loss_ratio', value => 'value', template => '%.2f', unit => '%', |
| 128 |
label_extra_instance => 1, min => 0, max => 100 }, |
| 129 |
], |
| 130 |
} |
| 131 |
}, |
| 132 |
{ label => 'PercentagePacketsPositiveJitter', set => { |
| 133 |
key_values => [ |
| 134 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 135 |
{ name => 'NumOfPositivesSD_1' }, { name => 'NumOfPositivesSD_2' }, { name => 'NumOfPositivesSD_times' }, |
| 136 |
{ name => 'NumOfRTT_1' }, { name => 'NumOfRTT_2' }, { name => 'NumOfRTT_times' }, |
| 137 |
], |
| 138 |
closure_custom_calc => $self->can('custom_PercentagePacketsPositiveJitter_calc'), |
| 139 |
closure_custom_output => $self->can('custom_generic_output'), |
| 140 |
output_template => 'Percentage of Packets that had Positive Jitter : %.2f', |
| 141 |
threshold_use => 'value', |
| 142 |
perfdatas => [ |
| 143 |
{ label => 'prct_jitter_per_packet_positive_jitter', value => 'value', template => '%.2f', |
| 144 |
label_extra_instance => 1, }, |
| 145 |
], |
| 146 |
} |
| 147 |
}, |
| 148 |
{ label => 'AverageJitterPerPacketPositiveJitter', set => { |
| 149 |
key_values => [ |
| 150 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 151 |
{ name => 'SumOfPositivesSD_1' }, { name => 'SumOfPositivesSD_2' }, { name => 'SumOfPositivesSD_times' }, |
| 152 |
{ name => 'NumOfRTT_1' }, { name => 'NumOfRTT_2' }, { name => 'NumOfRTT_times' }, |
| 153 |
], |
| 154 |
closure_custom_calc => $self->can('custom_AverageJitterPerPacketPositiveJitter_calc'), |
| 155 |
closure_custom_output => $self->can('custom_generic_output'), |
| 156 |
output_template => 'Average Jitter per Packet that had Positive Jitter : %.2f', |
| 157 |
threshold_use => 'value', |
| 158 |
perfdatas => [ |
| 159 |
{ label => 'average_jitter_per_packet_positive_jitter', value => 'value', template => '%.2f', |
| 160 |
label_extra_instance => 1 }, |
| 161 |
], |
| 162 |
} |
| 163 |
}, |
| 164 |
{ label => 'PercentagePacketsNegativeJitter', set => { |
| 165 |
key_values => [ |
| 166 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 167 |
{ name => 'NumOfNegativesSD_1' }, { name => 'NumOfNegativesSD_2' }, { name => 'NumOfNegativesSD_times' }, |
| 168 |
{ name => 'NumOfRTT_1' }, { name => 'NumOfRTT_2' }, { name => 'NumOfRTT_times' }, |
| 169 |
], |
| 170 |
closure_custom_calc => $self->can('custom_PercentagePacketsNegativeJitter_calc'), |
| 171 |
closure_custom_output => $self->can('custom_generic_output'), |
| 172 |
output_template => 'Percentage of Packets that had Negative Jitter : %.2f', |
| 173 |
threshold_use => 'value', |
| 174 |
perfdatas => [ |
| 175 |
{ label => 'prct_jitter_per_packet_negative_jitter', value => 'value', template => '%.2f', |
| 176 |
label_extra_instance => 1, }, |
| 177 |
], |
| 178 |
} |
| 179 |
}, |
| 180 |
{ label => 'AverageJitterPerPacketNegativeJitter', set => { |
| 181 |
key_values => [ |
| 182 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 183 |
{ name => 'SumOfNegativesSD_1' }, { name => 'SumOfNegativesSD_2' }, { name => 'SumOfNegativesSD_times' }, |
| 184 |
{ name => 'NumOfRTT_1' }, { name => 'NumOfRTT_2' }, { name => 'NumOfRTT_times' }, |
| 185 |
], |
| 186 |
closure_custom_calc => $self->can('custom_AverageJitterPerPacketNegativeJitter_calc'), |
| 187 |
closure_custom_output => $self->can('custom_generic_output'), |
| 188 |
output_template => 'Average Jitter per Packet that had Negative Jitter : %.2f', |
| 189 |
threshold_use => 'value', |
| 190 |
perfdatas => [ |
| 191 |
{ label => 'average_jitter_per_packet_negative_jitter', value => 'value', template => '%.2f', |
| 192 |
label_extra_instance => 1 }, |
| 193 |
], |
| 194 |
} |
| 195 |
}, |
| 196 |
{ label => 'AverageJitter', set => { |
| 197 |
key_values => [ |
| 198 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 199 |
{ name => 'SumOfPositivesDS_1' }, { name => 'SumOfPositivesDS_2' }, { name => 'SumOfPositivesDS_times' }, |
| 200 |
{ name => 'SumOfNegativesDS_1' }, { name => 'SumOfNegativesDS_2' }, { name => 'SumOfNegativesDS_times' }, |
| 201 |
{ name => 'SumOfPositivesSD_1' }, { name => 'SumOfPositivesSD_2' }, { name => 'SumOfPositivesSD_times' }, |
| 202 |
{ name => 'SumOfNegativesSD_1' }, { name => 'SumOfNegativesSD_2' }, { name => 'SumOfNegativesSD_times' }, |
| 203 |
{ name => 'NumOfPositivesDS_1' }, { name => 'NumOfPositivesDS_2' }, { name => 'NumOfPositivesDS_times' }, |
| 204 |
{ name => 'NumOfNegativesDS_1' }, { name => 'NumOfNegativesDS_2' }, { name => 'NumOfNegativesDS_times' }, |
| 205 |
{ name => 'NumOfPositivesSD_1' }, { name => 'NumOfPositivesSD_2' }, { name => 'NumOfPositivesSD_times' }, |
| 206 |
{ name => 'NumOfNegativesSD_1' }, { name => 'NumOfNegativesSD_2' }, { name => 'NumOfNegativesSD_times' }, |
| 207 |
], |
| 208 |
closure_custom_calc => $self->can('custom_AverageJitter_calc'), |
| 209 |
closure_custom_output => $self->can('custom_generic_output'), |
| 210 |
output_template => 'Average Jitter : %.2f ms', |
| 211 |
threshold_use => 'value', |
| 212 |
perfdatas => [ |
| 213 |
{ label => 'average_jitter', value => 'value', template => '%.2f', unit => 'ms', |
| 214 |
label_extra_instance => 1 }, |
| 215 |
], |
| 216 |
} |
| 217 |
}, |
| 218 |
{ label => 'RTTStandardDeviation', set => { |
| 219 |
key_values => [ |
| 220 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 221 |
{ name => 'RTTSum2High_1' }, { name => 'RTTSum2High_2' }, { name => 'RTTSum2High_times' }, |
| 222 |
{ name => 'RTTSum2Low_1' }, { name => 'RTTSum2Low_2' }, { name => 'RTTSum2Low_times' }, |
| 223 |
{ name => 'NumOfRTT_1' }, { name => 'NumOfRTT_2' }, { name => 'NumOfRTT_times' }, |
| 224 |
{ name => 'RTTSum_1' }, { name => 'RTTSum_2' }, { name => 'RTTSum_times' }, |
| 225 |
], |
| 226 |
closure_custom_calc => $self->can('custom_RTTStandardDeviation_calc'), |
| 227 |
closure_custom_output => $self->can('custom_generic_output'), |
| 228 |
output_template => 'Round-Trip Time Standard Deviation : %.2f ms', |
| 229 |
threshold_use => 'value', |
| 230 |
perfdatas => [ |
| 231 |
{ label => 'rtt_standard_deviation', value => 'value', template => '%.2f', unit => 'ms', |
| 232 |
label_extra_instance => 1 }, |
| 233 |
], |
| 234 |
} |
| 235 |
}, |
| 236 |
{ label => 'DelaySource2DestinationStandardDeviation', set => { |
| 237 |
key_values => [ |
| 238 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 239 |
{ name => 'OWSum2SDHigh_1' }, { name => 'OWSum2SDHigh_2' }, { name => 'OWSum2SDHigh_times' }, |
| 240 |
{ name => 'OWSum2SDLow_1' }, { name => 'OWSum2SDLow_2' }, { name => 'OWSum2SDLow_times' }, |
| 241 |
{ name => 'NumOfOW_1' }, { name => 'NumOfOW_2' }, { name => 'NumOfOW_times' }, |
| 242 |
{ name => 'OWSumSD_1' }, { name => 'OWSumSD_2' }, { name => 'OWSumSD_times' }, |
| 243 |
], |
| 244 |
closure_custom_calc => $self->can('custom_DelaySource2DestinationStandardDeviation_calc'), |
| 245 |
closure_custom_output => $self->can('custom_generic_output'), |
| 246 |
output_template => 'One-Way Delay Source to Destination Standard Deviation : %.2f ms', |
| 247 |
threshold_use => 'value', |
| 248 |
perfdatas => [ |
| 249 |
{ label => 'delay_src2dest_stdev', value => 'value', template => '%.2f', unit => 'ms', |
| 250 |
label_extra_instance => 1 }, |
| 251 |
], |
| 252 |
} |
| 253 |
}, |
| 254 |
{ label => 'DelayDestination2SourceStandardDeviation', set => { |
| 255 |
key_values => [ |
| 256 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 257 |
{ name => 'OWSum2DSHigh_1' }, { name => 'OWSum2DSHigh_2' }, { name => 'OWSum2DSHigh_times' }, |
| 258 |
{ name => 'OWSum2DSLow_1' }, { name => 'OWSum2DSLow_2' }, { name => 'OWSum2DSLow_times' }, |
| 259 |
{ name => 'NumOfOW_1' }, { name => 'NumOfOW_2' }, { name => 'NumOfOW_times' }, |
| 260 |
{ name => 'OWSumDS_1' }, { name => 'OWSumDS_2' }, { name => 'OWSumDS_times' }, |
| 261 |
], |
| 262 |
closure_custom_calc => $self->can('custom_DelayDestination2SourceStandardDeviation_calc'), |
| 263 |
closure_custom_output => $self->can('custom_generic_output'), |
| 264 |
output_template => 'One-Way Delay Destination to Source Standard Deviation : %.2f ms', |
| 265 |
threshold_use => 'value', |
| 266 |
perfdatas => [ |
| 267 |
{ label => 'delay_dest2src_stdev', value => 'value', template => '%.2f', unit => 'ms', |
| 268 |
label_extra_instance => 1 }, |
| 269 |
], |
| 270 |
} |
| 271 |
}, |
| 272 |
{ label => 'JitterSource2DestinationStandardDeviation', set => { |
| 273 |
key_values => [ |
| 274 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 275 |
{ name => 'Sum2PositivesSDHigh_1' }, { name => 'Sum2PositivesSDHigh_2' }, { name => 'Sum2PositivesSDHigh_times' }, |
| 276 |
{ name => 'Sum2PositivesSDLow_1' }, { name => 'Sum2PositivesSDLow_2' }, { name => 'Sum2PositivesSDLow_times' }, |
| 277 |
{ name => 'Sum2NegativesSDHigh_1' }, { name => 'Sum2NegativesSDHigh_2' }, { name => 'Sum2NegativesSDHigh_times' }, |
| 278 |
{ name => 'Sum2NegativesSDLow_1' }, { name => 'Sum2NegativesSDLow_2' }, { name => 'Sum2NegativesSDLow_times' }, |
| 279 |
{ name => 'SumOfPositivesSD_1' }, { name => 'SumOfPositivesSD_2' }, { name => 'SumOfPositivesSD_times' }, |
| 280 |
{ name => 'SumOfNegativesSD_1' }, { name => 'SumOfNegativesSD_2' }, { name => 'SumOfNegativesSD_times' }, |
| 281 |
{ name => 'NumOfPositivesSD_1' }, { name => 'NumOfPositivesSD_2' }, { name => 'NumOfPositivesSD_times' }, |
| 282 |
{ name => 'NumOfNegativesSD_1' }, { name => 'NumOfNegativesSD_2' }, { name => 'NumOfNegativesSD_times' }, |
| 283 |
], |
| 284 |
closure_custom_calc => $self->can('custom_JitterSource2DestinationStandardDeviation_calc'), |
| 285 |
closure_custom_output => $self->can('custom_generic_output'), |
| 286 |
output_template => 'One-Way Jitter Source to Destination Standard Deviation : %.2f ms', |
| 287 |
threshold_use => 'value', |
| 288 |
perfdatas => [ |
| 289 |
{ label => 'jitter_src2dest_stdev', value => 'value', template => '%.2f', unit => 'ms', |
| 290 |
label_extra_instance => 1 }, |
| 291 |
], |
| 292 |
} |
| 293 |
}, |
| 294 |
{ label => 'JitterDestination2SourceStandardDeviation', set => { |
| 295 |
key_values => [ |
| 296 |
{ name => 'rttMonCtrlAdminStatus' }, { name => 'rttMonCtrlAdminRttType' }, |
| 297 |
{ name => 'Sum2PositivesDSHigh_1' }, { name => 'Sum2PositivesDSHigh_2' }, { name => 'Sum2PositivesDSHigh_times' }, |
| 298 |
{ name => 'Sum2PositivesDSLow_1' }, { name => 'Sum2PositivesDSLow_2' }, { name => 'Sum2PositivesDSLow_times' }, |
| 299 |
{ name => 'Sum2NegativesDSHigh_1' }, { name => 'Sum2NegativesDSHigh_2' }, { name => 'Sum2NegativesDSHigh_times' }, |
| 300 |
{ name => 'Sum2NegativesDSLow_1' }, { name => 'Sum2NegativesDSLow_2' }, { name => 'Sum2NegativesDSLow_times' }, |
| 301 |
{ name => 'SumOfPositivesDS_1' }, { name => 'SumOfPositivesDS_2' }, { name => 'SumOfPositivesDS_times' }, |
| 302 |
{ name => 'SumOfNegativesDS_1' }, { name => 'SumOfNegativesDS_2' }, { name => 'SumOfNegativesDS_times' }, |
| 303 |
{ name => 'NumOfPositivesDS_1' }, { name => 'NumOfPositivesDS_2' }, { name => 'NumOfPositivesDS_times' }, |
| 304 |
{ name => 'NumOfNegativesDS_1' }, { name => 'NumOfNegativesDS_2' }, { name => 'NumOfNegativesDS_times' }, |
| 305 |
], |
| 306 |
closure_custom_calc => $self->can('custom_JitterDestination2SourceStandardDeviation_calc'), |
| 307 |
closure_custom_output => $self->can('custom_generic_output'), |
| 308 |
output_template => 'One-Way Jitter Destination to Source Standard Deviation : %.2f ms', |
| 309 |
threshold_use => 'value', |
| 310 |
perfdatas => [ |
| 311 |
{ label => 'jitter_dest2src_stdev', value => 'value', template => '%.2f', unit => 'ms', |
| 312 |
label_extra_instance => 1 }, |
| 313 |
], |
| 314 |
} |
| 315 |
}, |
| 316 |
]; |
| 317 |
} |
| 318 |
|
| 319 |
sub prefix_tag_output { |
| 320 |
my ($self, %options) = @_; |
| 321 |
|
| 322 |
return "RTT '" . $options{instance_value}->{rttMonCtrlAdminTag} . "' "; |
| 323 |
} |
| 324 |
|
| 325 |
my $ipsla; |
| 326 |
my $thresholds = { |
| 327 |
opersense => [ |
| 328 |
['ok', 'OK'], |
| 329 |
['.*', 'CRITICAL'], |
| 330 |
], |
| 331 |
applspecificsense => [ |
| 332 |
['.*', 'OK'], |
| 333 |
], |
| 334 |
}; |
| 335 |
|
| 336 |
###### Common func ###### |
| 337 |
|
| 338 |
sub get_my_delta { |
| 339 |
my ($self, %options) = @_; |
| 340 |
|
| 341 |
my $value; |
| 342 |
my ($old_time1, $old_time2) = split /_/, $options{old_datas}->{$self->{instance} . '_' . $options{name} . '_times'}; |
| 343 |
my ($new_time1, $new_time2) = split /_/, $options{new_datas}->{$self->{instance} . '_' . $options{name} . '_times'}; |
| 344 |
if (defined($old_time1) && defined($new_time1) && $old_time1 == $new_time1) { |
| 345 |
$value = $options{new_datas}->{$self->{instance} . '_' . $options{name} . '_1'} - $options{old_datas}->{$self->{instance} . '_' . $options{name} . '_1'} + |
| 346 |
$options{new_datas}->{$self->{instance} . '_' . $options{name} . '_2'} - $options{old_datas}->{$self->{instance} . '_' . $options{name} . '_2'}; |
| 347 |
} else { |
| 348 |
$value = $options{new_datas}->{$self->{instance} . '_' . $options{name} . '_1'} - $options{old_datas}->{$self->{instance} . '_' . $options{name} . '_2'} + |
| 349 |
$options{new_datas}->{$self->{instance} . '_' . $options{name} . '_2'}; |
| 350 |
} |
| 351 |
return $value; |
| 352 |
} |
| 353 |
|
| 354 |
sub custom_generic_output { |
| 355 |
my ($self, %options) = @_; |
| 356 |
|
| 357 |
return sprintf($self->{output_template}, $self->{result_values}->{value}); |
| 358 |
} |
| 359 |
|
| 360 |
sub check_buffer_creation { |
| 361 |
my ($self, %options) = @_; |
| 362 |
|
| 363 |
if (!defined($options{old_datas}->{$self->{instance} . '_' . $options{name} . '_1'})) { |
| 364 |
$self->{error_msg} = "Buffer creation"; |
| 365 |
return 1; |
| 366 |
} |
| 367 |
return 0; |
| 368 |
} |
| 369 |
|
| 370 |
###### STATUS ###### |
| 371 |
|
| 372 |
sub custom_status_threshold { |
| 373 |
my ($self, %options) = @_; |
| 374 |
my $status = 'ok'; |
| 375 |
|
| 376 |
if ($self->{result_values}->{rttMonCtrlAdminStatus} !~ /active/) { |
| 377 |
return $status; |
| 378 |
} |
| 379 |
|
| 380 |
$status = $ipsla->get_severity(section => $self->{result_values}->{section}, value => $self->{result_values}->{opersense}); |
| 381 |
return $status; |
| 382 |
} |
| 383 |
|
| 384 |
sub custom_status_output { |
| 385 |
my ($self, %options) = @_; |
| 386 |
my $msg = 'Status : '; |
| 387 |
|
| 388 |
if ($self->{result_values}->{rttMonCtrlAdminStatus} !~ /active/) { |
| 389 |
$msg .= 'not active (' . $self->{result_values}->{rttMonCtrlAdminStatus} . ')'; |
| 390 |
return $msg; |
| 391 |
} |
| 392 |
$msg .= "operation sense is '" . $self->{result_values}->{opersense} . "'"; |
| 393 |
return $msg; |
| 394 |
} |
| 395 |
|
| 396 |
sub custom_status_calc { |
| 397 |
my ($self, %options) = @_; |
| 398 |
|
| 399 |
$self->{result_values}->{rttMonCtrlAdminStatus} = $options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'}; |
| 400 |
$self->{result_values}->{rttMonCtrlAdminTag} = $options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminTag'}; |
| 401 |
$self->{result_values}->{rttMonCtrlAdminRttType} = $options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'}; |
| 402 |
$self->{result_values}->{rttMonCtrlAdminThreshold} = $options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminThreshold'}; |
| 403 |
$self->{result_values}->{rttMonEchoAdminPrecision} = $options{new_datas}->{$self->{instance} . '_rttMonEchoAdminPrecision'}; |
| 404 |
$self->{result_values}->{rttMonLatestRttOperCompletionTime} = $options{new_datas}->{$self->{instance} . '_rttMonLatestRttOperCompletionTime'}; |
| 405 |
$self->{result_values}->{rttMonLatestRttOperSense} = $options{new_datas}->{$self->{instance} . '_rttMonLatestRttOperSense'}; |
| 406 |
$self->{result_values}->{rttMonLatestRttOperApplSpecificSense} = $options{new_datas}->{$self->{instance} . '_rttMonLatestRttOperApplSpecificSense'}; |
| 407 |
$self->{result_values}->{opersense} = $self->{result_values}->{rttMonLatestRttOperSense}; |
| 408 |
$self->{result_values}->{section} = 'opersense'; |
| 409 |
if ($self->{result_values}->{opersense} =~ /applicationSpecific/i) { |
| 410 |
$self->{result_values}->{opersense} = $self->{result_values}->{rttMonLatestRttOperApplSpecificSense}; |
| 411 |
$self->{result_values}->{section} = 'applspecificsense'; |
| 412 |
} |
| 413 |
return 0; |
| 414 |
} |
| 415 |
|
| 416 |
####### 1 - Number Over Thresholds ####### |
| 417 |
sub custom_NumberOverThresholds_calc { |
| 418 |
my ($self, %options) = @_; |
| 419 |
|
| 420 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 421 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 422 |
return -2; |
| 423 |
} |
| 424 |
return -1 if (check_buffer_creation($self, %options, name => 'OverThresholds')); |
| 425 |
|
| 426 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'OverThresholds'); |
| 427 |
return 0; |
| 428 |
} |
| 429 |
|
| 430 |
####### 2 - Average Delay SD ####### |
| 431 |
sub custom_AverageDelaySD_calc { |
| 432 |
my ($self, %options) = @_; |
| 433 |
|
| 434 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 435 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 436 |
return -2; |
| 437 |
} |
| 438 |
return -1 if (check_buffer_creation($self, %options, name => 'OWSumSD')); |
| 439 |
my $num_of_ow = get_my_delta($self, %options, name => 'NumOfOW'); |
| 440 |
if ($num_of_ow == 0) { |
| 441 |
$self->{error_msg} = "wait new values"; |
| 442 |
return -3; |
| 443 |
} |
| 444 |
|
| 445 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'OWSumSD') / $num_of_ow; |
| 446 |
return 0; |
| 447 |
} |
| 448 |
|
| 449 |
####### 3 - Average Delay DS ####### |
| 450 |
sub custom_AverageDelayDS_calc { |
| 451 |
my ($self, %options) = @_; |
| 452 |
|
| 453 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 454 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 455 |
return -2; |
| 456 |
} |
| 457 |
return -1 if (check_buffer_creation($self, %options, name => 'OWSumDS')); |
| 458 |
my $num_of_ow = get_my_delta($self, %options, name => 'NumOfOW'); |
| 459 |
if ($num_of_ow == 0) { |
| 460 |
$self->{error_msg} = "wait new values"; |
| 461 |
return -3; |
| 462 |
} |
| 463 |
|
| 464 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'OWSumDS') / $num_of_ow; |
| 465 |
return 0; |
| 466 |
} |
| 467 |
|
| 468 |
####### 4 - Packet Loss Ratio ####### |
| 469 |
sub custom_PacketLossRatio_calc { |
| 470 |
my ($self, %options) = @_; |
| 471 |
|
| 472 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 473 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 474 |
return -2; |
| 475 |
} |
| 476 |
return -1 if (check_buffer_creation($self, %options, name => 'PacketLossDS')); |
| 477 |
my $divide = (get_my_delta($self, %options, name => 'PacketLossSD') + get_my_delta($self, %options, name => 'PacketLossDS') + get_my_delta($self, %options, name => 'PacketMIA') + |
| 478 |
get_my_delta($self, %options, name => 'PacketLateArrival') + get_my_delta($self, %options, name => 'PacketOutOfSequence') + get_my_delta($self, %options, name => 'NumOfRTT')); |
| 479 |
if ($divide == 0) { |
| 480 |
$self->{error_msg} = "wait new values"; |
| 481 |
return -3; |
| 482 |
} |
| 483 |
|
| 484 |
$self->{result_values}->{value} = ((get_my_delta($self, %options, name => 'PacketLossDS') + get_my_delta($self, %options, name => 'PacketLossSD') + get_my_delta($self, %options, name => 'PacketMIA')) * 100 ) / |
| 485 |
$divide; |
| 486 |
return 0; |
| 487 |
} |
| 488 |
|
| 489 |
####### 5 - Percentage of Packets that had Positive Jitter ####### |
| 490 |
sub custom_PercentagePacketsPositiveJitter_calc { |
| 491 |
my ($self, %options) = @_; |
| 492 |
|
| 493 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 494 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 495 |
return -2; |
| 496 |
} |
| 497 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfPositivesSD')); |
| 498 |
my $num_of_rtt = get_my_delta($self, %options, name => 'NumOfRTT'); |
| 499 |
if ($num_of_rtt == 0) { |
| 500 |
$self->{error_msg} = "wait new values"; |
| 501 |
return -3; |
| 502 |
} |
| 503 |
|
| 504 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'NumOfPositivesSD') / $num_of_rtt; |
| 505 |
return 0; |
| 506 |
} |
| 507 |
|
| 508 |
####### 6 - Average Jitter per Packet that had Positive Jitter ####### |
| 509 |
sub custom_AverageJitterPerPacketPositiveJitter_calc { |
| 510 |
my ($self, %options) = @_; |
| 511 |
|
| 512 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 513 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 514 |
return -2; |
| 515 |
} |
| 516 |
return -1 if (check_buffer_creation($self, %options, name => 'SumOfPositivesSD')); |
| 517 |
my $num_of_rtt = get_my_delta($self, %options, name => 'NumOfRTT'); |
| 518 |
if ($num_of_rtt == 0) { |
| 519 |
$self->{error_msg} = "wait new values"; |
| 520 |
return -3; |
| 521 |
} |
| 522 |
|
| 523 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'SumOfPositivesSD') / $num_of_rtt; |
| 524 |
return 0; |
| 525 |
} |
| 526 |
|
| 527 |
####### 7 - Percentage of Packets that had Negative Jitter ####### |
| 528 |
sub custom_PercentagePacketsNegativeJitter_calc { |
| 529 |
my ($self, %options) = @_; |
| 530 |
|
| 531 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 532 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 533 |
return -2; |
| 534 |
} |
| 535 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfNegativesSD')); |
| 536 |
my $num_of_rtt = get_my_delta($self, %options, name => 'NumOfRTT'); |
| 537 |
if ($num_of_rtt == 0) { |
| 538 |
$self->{error_msg} = "wait new values"; |
| 539 |
return -3; |
| 540 |
} |
| 541 |
|
| 542 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'NumOfNegativesSD') / $num_of_rtt; |
| 543 |
return 0; |
| 544 |
} |
| 545 |
|
| 546 |
####### 8 - Average Jitter per Packet that had Negative Jitter ####### |
| 547 |
sub custom_AverageJitterPerPacketNegativeJitter_calc { |
| 548 |
my ($self, %options) = @_; |
| 549 |
|
| 550 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 551 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 552 |
return -2; |
| 553 |
} |
| 554 |
return -1 if (check_buffer_creation($self, %options, name => 'SumOfNegativesSD')); |
| 555 |
my $num_of_rtt = get_my_delta($self, %options, name => 'NumOfRTT'); |
| 556 |
if ($num_of_rtt == 0) { |
| 557 |
$self->{error_msg} = "wait new values"; |
| 558 |
return -3; |
| 559 |
} |
| 560 |
|
| 561 |
$self->{result_values}->{value} = get_my_delta($self, %options, name => 'SumOfNegativesSD') / $num_of_rtt; |
| 562 |
return 0; |
| 563 |
} |
| 564 |
|
| 565 |
####### 9 - Average Jitter ####### |
| 566 |
sub custom_AverageJitter_calc { |
| 567 |
my ($self, %options) = @_; |
| 568 |
|
| 569 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 570 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 571 |
return -2; |
| 572 |
} |
| 573 |
return -1 if (check_buffer_creation($self, %options, name => 'SumOfPositivesDS')); |
| 574 |
my $divide = (get_my_delta($self, %options, name => 'NumOfPositivesDS') + get_my_delta($self, %options, name => 'NumOfNegativesDS') + get_my_delta($self, %options, name => 'NumOfPositivesSD') + get_my_delta($self, %options, name => 'NumOfNegativesSD')); |
| 575 |
if ($divide == 0) { |
| 576 |
$self->{error_msg} = "wait new values"; |
| 577 |
return -3; |
| 578 |
} |
| 579 |
|
| 580 |
$self->{result_values}->{value} = ( |
| 581 |
get_my_delta($self, %options, name => 'SumOfPositivesDS') + |
| 582 |
get_my_delta($self, %options, name => 'SumOfNegativesDS') + |
| 583 |
get_my_delta($self, %options, name => 'SumOfPositivesSD') + |
| 584 |
get_my_delta($self, %options, name => 'SumOfNegativesSD')) / $divide; |
| 585 |
return 0; |
| 586 |
} |
| 587 |
|
| 588 |
####### 10 - Round-Trip Time Standard Deviation ####### |
| 589 |
sub custom_RTTStandardDeviation_calc { |
| 590 |
my ($self, %options) = @_; |
| 591 |
|
| 592 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 593 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 594 |
return -2; |
| 595 |
} |
| 596 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfRTT')); |
| 597 |
my $num_of_rtt = get_my_delta($self, %options, name => 'NumOfRTT'); |
| 598 |
if ($num_of_rtt == 0) { |
| 599 |
$self->{error_msg} = "wait new values"; |
| 600 |
return -3; |
| 601 |
} |
| 602 |
|
| 603 |
$self->{result_values}->{value} = sqrt( |
| 604 |
((get_my_delta($self, %options, name => 'RTTSum2High') * 2 ** 32 + get_my_delta($self, %options, name => 'RTTSum2Low')) / $num_of_rtt) - |
| 605 |
(get_my_delta($self, %options, name => 'RTTSum') / $num_of_rtt) ** 2 |
| 606 |
); |
| 607 |
return 0; |
| 608 |
} |
| 609 |
|
| 610 |
####### 11 - One-Way Delay Source to Destination Standard Deviation ####### |
| 611 |
sub custom_DelaySource2DestinationStandardDeviation_calc { |
| 612 |
my ($self, %options) = @_; |
| 613 |
|
| 614 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 615 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 616 |
return -2; |
| 617 |
} |
| 618 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfOW')); |
| 619 |
my $num_of_ow = get_my_delta($self, %options, name => 'NumOfOW'); |
| 620 |
if ($num_of_ow == 0) { |
| 621 |
$self->{error_msg} = "wait new values"; |
| 622 |
return -3; |
| 623 |
} |
| 624 |
|
| 625 |
$self->{result_values}->{value} = sqrt( |
| 626 |
((get_my_delta($self, %options, name => 'OWSum2SDHigh') * 2 ** 32 + get_my_delta($self, %options, name => 'OWSum2SDLow')) / $num_of_ow) - |
| 627 |
(get_my_delta($self, %options, name => 'OWSumSD') / $num_of_ow) ** 2 |
| 628 |
); |
| 629 |
return 0; |
| 630 |
} |
| 631 |
|
| 632 |
####### 12 - One-Way Delay Destination to Source Standard Deviation ####### |
| 633 |
sub custom_DelayDestination2SourceStandardDeviation_calc { |
| 634 |
my ($self, %options) = @_; |
| 635 |
|
| 636 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 637 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 638 |
return -2; |
| 639 |
} |
| 640 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfOW')); |
| 641 |
my $num_of_ow = get_my_delta($self, %options, name => 'NumOfOW'); |
| 642 |
if ($num_of_ow == 0) { |
| 643 |
$self->{error_msg} = "wait new values"; |
| 644 |
return -3; |
| 645 |
} |
| 646 |
|
| 647 |
$self->{result_values}->{value} = sqrt( |
| 648 |
((get_my_delta($self, %options, name => 'OWSum2DSHigh') * 2 ** 32 + get_my_delta($self, %options, name => 'OWSum2DSLow')) / $num_of_ow) - |
| 649 |
(get_my_delta($self, %options, name => 'OWSumDS') / $num_of_ow) ** 2 |
| 650 |
); |
| 651 |
return 0; |
| 652 |
} |
| 653 |
|
| 654 |
####### 13 - One-Way Jitter Source to Destination Standard Deviation ####### |
| 655 |
sub custom_JitterSource2DestinationStandardDeviation_calc { |
| 656 |
my ($self, %options) = @_; |
| 657 |
|
| 658 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 659 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 660 |
return -2; |
| 661 |
} |
| 662 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfPositivesSD')); |
| 663 |
my $divide = (get_my_delta($self, %options, name => 'NumOfPositivesSD') + get_my_delta($self, %options, name => 'NumOfNegativesSD')); |
| 664 |
if ($divide == 0) { |
| 665 |
$self->{error_msg} = "wait new values"; |
| 666 |
return -3; |
| 667 |
} |
| 668 |
|
| 669 |
$self->{result_values}->{value} = sqrt( |
| 670 |
((get_my_delta($self, %options, name => 'Sum2PositivesSDHigh') * 2 ** 32 + get_my_delta($self, %options, name => 'Sum2PositivesSDLow') + get_my_delta($self, %options, name => 'Sum2NegativesSDHigh') * 2 ** 32 + get_my_delta($self, %options, name => 'Sum2NegativesSDLow')) / $divide) - |
| 671 |
((get_my_delta($self, %options, name => 'SumOfPositivesSD') + get_my_delta($self, %options, name => 'SumOfNegativesSD')) / $divide) ** 2 |
| 672 |
); |
| 673 |
return 0; |
| 674 |
} |
| 675 |
|
| 676 |
####### 14 - JitterDestination2SourceStandardDeviation ####### |
| 677 |
sub custom_JitterDestination2SourceStandardDeviation_calc { |
| 678 |
my ($self, %options) = @_; |
| 679 |
|
| 680 |
if ($options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminStatus'} !~ /active/ && |
| 681 |
$options{new_datas}->{$self->{instance} . '_rttMonCtrlAdminRttType'} !~ /jitter/) { |
| 682 |
return -2; |
| 683 |
} |
| 684 |
return -1 if (check_buffer_creation($self, %options, name => 'NumOfPositivesDS')); |
| 685 |
my $divide = (get_my_delta($self, %options, name => 'NumOfPositivesDS') + get_my_delta($self, %options, name => 'NumOfNegativesDS')); |
| 686 |
if ($divide == 0) { |
| 687 |
$self->{error_msg} = "wait new values"; |
| 688 |
return -3; |
| 689 |
} |
| 690 |
|
| 691 |
$self->{result_values}->{value} = sqrt( |
| 692 |
((get_my_delta($self, %options, name => 'Sum2PositivesDSHigh') * 2 ** 32 + get_my_delta($self, %options, name => 'Sum2PositivesDSLow') + get_my_delta($self, %options, name => 'Sum2NegativesDSHigh') * 2 ** 32 + get_my_delta($self, %options, name => 'Sum2NegativesDSLow')) / $divide) - |
| 693 |
((get_my_delta($self, %options, name => 'SumOfPositivesDS') + get_my_delta($self, %options, name => 'SumOfNegativesDS')) / $divide) ** 2 |
| 694 |
); |
| 695 |
return 0; |
| 696 |
} |
| 697 |
|
| 698 |
my $oid_rttMonCtrlAdminEntry = '.1.3.6.1.4.1.9.9.42.1.2.1.1'; |
| 699 |
my $oid_rttMonEchoAdminPrecision = '.1.3.6.1.4.1.9.9.42.1.2.2.1.37'; |
| 700 |
|
| 701 |
my $oid_rttMonLatestRttOperEntry = '.1.3.6.1.4.1.9.9.42.1.2.10.1'; |
| 702 |
|
| 703 |
# Packet Loss Ratio (unit: %): |
| 704 |
# [(RttMonJitterStatsPacketLossDS + RttMonJitterStatsPacketLossSD + RttMonJitterStatsPacketMIA) * 100 ] / |
| 705 |
# [RttMonJitterStatsPacketLossSD + RttMonJitterStatsPacketLossDS + RttMonJitterStatsPacketMIA + |
| 706 |
# RttMonJitterStatsPacketLateArrival + RttMonJitterStatsPacketOutOfSequence + RttMonJitterStatsNumOfRTT ] |
| 707 |
|
| 708 |
# Percentage (unit: %): |
| 709 |
# NumOfPositiveSD/NumOfRTT (Percentage of Packets that had Positive Jitter) |
| 710 |
# SumOfPositiveSD/NumOfRTT (Average Jitter per Packet that had Positive Jitter) |
| 711 |
# NumOfNegativeSD/NumOfRTT (Percentage of Packets that had Negative Jitter) |
| 712 |
# SumOfNegativeSD/NumOfRTT (Average Jitter per Packet that had Negative Jitter) |
| 713 |
# |
| 714 |
# Average Jitter (unit: ms): |
| 715 |
# jitterSum = sumOfPositivesDS + sumOfNegativesDS + sumOfPositivesSD + sumOfNegativesSD; |
| 716 |
# jitterNum = numOfPositivesDS + numOfNegativesDS + numOfPositivesSD + numOfNegativesSD; |
| 717 |
# avgJitter = jitterSum/jitterNum; |
| 718 |
|
| 719 |
# Delays (unit: ms): |
| 720 |
# RttMonJitterStatsOWSumSD / RttMonJitterStatsNumOfOW |
| 721 |
# RttMonJitterStatsOWSumDS / RttMonJitterStatsNumOfOW |
| 722 |
|
| 723 |
# Round-Trip Time Standard Deviation (unit: ms): |
| 724 |
# Square Root of [ ((RttMonJitterStatsRTTSum2High * 2^32 + RttMonJitterStatsRTTSum2Low) / RttMonJitterStatsNumOfRTT) - (RttMonJitterStatsRTTSum / RttMonJitterStatsNumOfRTT)^2 ] |
| 725 |
# One-Way Delay Source to Destination Standard Deviation (unit: ms): |
| 726 |
# Square Root of [ ((RttMonJitterStatsOWSum2SDHigh * 2^32 + RttMonJitterStatsOWSum2SDLow) / RttMonJitterStatsNumOfOW) - (RttMonJitterStatsOWSumSD / RttMonJitterStatsNumOfOW)^2 ] |
| 727 |
# One-Way Delay Destination to Source Standard Deviation (unit: ms): |
| 728 |
# Square Root of [ ((RttMonJitterStatsOWSum2DSHigh * 2^32 + RttMonJitterStatsOWSum2DSLow) / RttMonJitterStatsNumOfOW) - (RttMonJitterStatsOWSumDS / RttMonJitterStatsNumOfOW)^2 ] |
| 729 |
# One-Way Jitter Source to Destination Standard Deviation (unit: ms): |
| 730 |
# Square Root of [ ((RttMonJitterStatsSum2PositivesSDHigh * 2^32 + RttMonJitterStatsSum2PositivesSDLow + RttMonJitterStatsSum2NegativesSDHigh * 2^32 + RttMonJitterStatsSum2NegativesSDLow) / (RttMonJitterStatsNumOfPositivesSD + RttMonJitterStatsNumOfNegativesSD)) - ((RttMonJitterStatsSumOfPositivesSD + RttMonJitterStatsSumOfNegativesSD) / (RttMonJitterStatsNumOfPositivesSD + RttMonJitterStatsNumOfNegativesSD))^2 ] |
| 731 |
# One-Way Jitter Destination to Source Standard Deviation (unit: ms): |
| 732 |
# Square Root of [ ((RttMonJitterStatsSum2PositivesDSHigh * 2^32 + RttMonJitterStatsSum2PositivesDSLow + RttMonJitterStatsSum2NegativesDSHigh * 2^32 + RttMonJitterStatsSum2NegativesDSLow) / (RttMonJitterStatsNumOfPositivesDS + RttMonJitterStatsNumOfNegativesDS)) - ((RttMonJitterStatsSumOfPositivesDS + RttMonJitterStatsSumOfNegativesDS) / (RttMonJitterStatsNumOfPositivesDS + RttMonJitterStatsNumOfNegativesDS))^2 ] |
| 733 |
|
| 734 |
my $oid_rttMonJitterStatsEntry = '.1.3.6.1.4.1.9.9.42.1.3.5.1'; |
| 735 |
my $oids_jitter_stats = { |
| 736 |
NumOfRTT => '.1.3.6.1.4.1.9.9.42.1.3.5.1.4', |
| 737 |
OverThresholds => '.1.3.6.1.4.1.9.9.42.1.3.5.1.3', |
| 738 |
RTTSum => '.1.3.6.1.4.1.9.9.42.1.3.5.1.5', |
| 739 |
RTTSum2Low => '.1.3.6.1.4.1.9.9.42.1.3.5.1.6', |
| 740 |
RTTSum2High => '.1.3.6.1.4.1.9.9.42.1.3.5.1.7', |
| 741 |
NumOfOW => '.1.3.6.1.4.1.9.9.42.1.3.5.1.51', |
| 742 |
OWSumSD => '.1.3.6.1.4.1.9.9.42.1.3.5.1.41', # low |
| 743 |
OWSumSDHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.67', # high |
| 744 |
OWSumDS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.46', # low |
| 745 |
OWSumDSHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.68', # high |
| 746 |
SumOfPositivesSD => '.1.3.6.1.4.1.9.9.42.1.3.5.1.13', |
| 747 |
SumOfNegativesSD => '.1.3.6.1.4.1.9.9.42.1.3.5.1.19', |
| 748 |
SumOfPositivesDS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.25', |
| 749 |
SumOfNegativesDS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.31', |
| 750 |
NumOfNegativesSD => '.1.3.6.1.4.1.9.9.42.1.3.5.1.18', |
| 751 |
Sum2NegativesSDLow => '.1.3.6.1.4.1.9.9.42.1.3.5.1.20', |
| 752 |
Sum2NegativesSDHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.21', |
| 753 |
NumOfNegativesDS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.30', |
| 754 |
Sum2NegativesDSLow => '.1.3.6.1.4.1.9.9.42.1.3.5.1.32', |
| 755 |
Sum2NegativesDSHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.33', |
| 756 |
NumOfPositivesSD => '.1.3.6.1.4.1.9.9.42.1.3.5.1.12', |
| 757 |
Sum2PositivesSDLow => '.1.3.6.1.4.1.9.9.42.1.3.5.1.14', |
| 758 |
Sum2PositivesSDHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.15', |
| 759 |
NumOfPositivesDS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.24', |
| 760 |
Sum2PositivesDSLow => '.1.3.6.1.4.1.9.9.42.1.3.5.1.26', |
| 761 |
Sum2PositivesDSHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.27', |
| 762 |
PacketLossSD => '.1.3.6.1.4.1.9.9.42.1.3.5.1.34', |
| 763 |
PacketLossDS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.35', |
| 764 |
PacketOutOfSequence => '.1.3.6.1.4.1.9.9.42.1.3.5.1.36', |
| 765 |
PacketMIA => '.1.3.6.1.4.1.9.9.42.1.3.5.1.37', |
| 766 |
PacketLateArrival => '.1.3.6.1.4.1.9.9.42.1.3.5.1.38', |
| 767 |
OWSum2SDLow => '.1.3.6.1.4.1.9.9.42.1.3.5.1.42', |
| 768 |
OWSum2SDHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.43', |
| 769 |
OWSum2DSLow => '.1.3.6.1.4.1.9.9.42.1.3.5.1.47', |
| 770 |
OWSum2DSHigh => '.1.3.6.1.4.1.9.9.42.1.3.5.1.48', |
| 771 |
MaxOfICPIF => '.1.3.6.1.4.1.9.9.42.1.3.5.1.59', |
| 772 |
MaxOfMOS => '.1.3.6.1.4.1.9.9.42.1.3.5.1.57', |
| 773 |
}; |
| 774 |
|
| 775 |
my %map_admin_rtt_type = ( |
| 776 |
1 => 'echo1', 2 => 'pathEcho', 3 => 'fileIO', 4 => 'script', 5 => 'udpEcho', 6 => 'tcpConnect', |
| 777 |
7 => 'http', 8 => 'dns', 9 => 'jitter', 10 => 'dlsw', 11 => 'dhcp', 12 => 'ftp', |
| 778 |
13 => 'voip', 14 => 'rtp', 15 => 'lspGroup', 16 => 'icmpjitter', 17 => 'lspPing', |
| 779 |
18 => 'lspTrace', 19 => 'ethernetPing', 20 => 'ethernetJitter', |
| 780 |
21 => 'lspPingPseudowire', 22 => 'video', 23 => 'y1731Delay', 24 => 'y1731Loss', 25 => 'mcastJitter', |
| 781 |
); |
| 782 |
my %map_admin_status = ( |
| 783 |
1 => 'active', 2 => 'notInService', 3 => 'notReady', 4 => 'createAndGo', 5 => 'createAndWait', 6 => 'destroy', |
| 784 |
); |
| 785 |
my %map_admin_precision = ( |
| 786 |
1 => 'ms', |
| 787 |
2 => 'us', |
| 788 |
); |
| 789 |
my %map_rtt_oper_sense = ( |
| 790 |
0 => 'other', 1 => 'ok', 2 => 'disconnected', 3 => 'overThreshold', 4 => 'timeout', 5 => 'busy', |
| 791 |
6 => 'notConnected', 7 => 'dropped', 8 => 'sequenceError', 9 => 'verifyError', 10 => 'applicationSpecific', |
| 792 |
11 => 'dnsServerTimeout', 12 => 'tcpConnectTimeout', 13 => 'httpTransactionTimeout', 14 => 'dnsQueryError', |
| 793 |
15 => 'httpError', 16 => 'error', 17 => 'mplsLspEchoTxError', 18 => 'mplsLspUnreachable', |
| 794 |
19 => 'mplsLspMalformedReq', 20 => 'mplsLspReachButNotFEC', 21 => 'enableOk', 22 => 'enableNoConnect', |
| 795 |
23 => 'enableVersionFail', 24 => 'enableInternalError', 25 => 'enableAbort', 26 => 'enableFail', |
| 796 |
27 => 'enableAuthFail', 28 => 'enableFormatError', 29 => 'enablePortInUse', 30 => 'statsRetrieveOk', |
| 797 |
31 => 'statsRetrieveNoConnect', 32 => 'statsRetrieveVersionFail', 33 => 'statsRetrieveInternalError', |
| 798 |
34 => 'statsRetrieveAbort', 35 => 'statsRetrieveFail', 36 => 'statsRetrieveAuthFail', |
| 799 |
37 => 'statsRetrieveFormatError', 38 => 'statsRetrievePortInUse', |
| 800 |
); |
| 801 |
|
| 802 |
my $mapping = { |
| 803 |
rttMonCtrlAdminTag => { oid => '.1.3.6.1.4.1.9.9.42.1.2.1.1.3' }, |
| 804 |
rttMonCtrlAdminRttType => { oid => '.1.3.6.1.4.1.9.9.42.1.2.1.1.4', map => \%map_admin_rtt_type }, |
| 805 |
rttMonCtrlAdminThreshold => { oid => '.1.3.6.1.4.1.9.9.42.1.2.1.1.5' }, |
| 806 |
rttMonCtrlAdminStatus => { oid => '.1.3.6.1.4.1.9.9.42.1.2.1.1.9', map => \%map_admin_status }, |
| 807 |
}; |
| 808 |
my $mapping2 = { |
| 809 |
rttMonEchoAdminPrecision => { oid => '.1.3.6.1.4.1.9.9.42.1.2.2.1.37', map => \%map_admin_precision }, |
| 810 |
}; |
| 811 |
my $mapping3 = { |
| 812 |
rttMonLatestRttOperCompletionTime => { oid => '.1.3.6.1.4.1.9.9.42.1.2.10.1.1' }, |
| 813 |
rttMonLatestRttOperSense => { oid => '.1.3.6.1.4.1.9.9.42.1.2.10.1.2', map => \%map_rtt_oper_sense }, |
| 814 |
rttMonLatestRttOperApplSpecificSense => { oid => '.1.3.6.1.4.1.9.9.42.1.2.10.1.3' }, |
| 815 |
}; |
| 816 |
|
| 817 |
sub new { |
| 818 |
my ($class, %options) = @_; |
| 819 |
my $self = $class->SUPER::new(package => __PACKAGE__, %options, statefile => 1); |
| 820 |
bless $self, $class; |
| 821 |
|
| 822 |
$options{options}->add_options(arguments => { |
| 823 |
'filter-tag:s' => { name => 'filter_tag', default => '.*' }, |
| 824 |
'threshold-overload:s@' => { name => 'threshold_overload' }, |
| 825 |
}); |
| 826 |
|
| 827 |
return $self; |
| 828 |
} |
| 829 |
|
| 830 |
sub check_options { |
| 831 |
my ($self, %options) = @_; |
| 832 |
$self->SUPER::check_options(%options); |
| 833 |
|
| 834 |
$self->{overload_th} = {}; |
| 835 |
foreach my $val (@{$self->{option_results}->{threshold_overload}}) { |
| 836 |
if ($val !~ /^(.*?),(.*?),(.*)$/) { |
| 837 |
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload option '" . $val . "'."); |
| 838 |
$self->{output}->option_exit(); |
| 839 |
} |
| 840 |
my ($section, $status, $filter) = ($1, $2, $3); |
| 841 |
if ($self->{output}->is_litteral_status(status => $status) == 0) { |
| 842 |
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload status '" . $val . "'."); |
| 843 |
$self->{output}->option_exit(); |
| 844 |
} |
| 845 |
$self->{overload_th}->{$section} = [] if (!defined($self->{overload_th}->{$section})); |
| 846 |
push @{$self->{overload_th}->{$section}}, {filter => $filter, status => $status}; |
| 847 |
} |
| 848 |
|
| 849 |
# to be used on custom function |
| 850 |
$ipsla = $self; |
| 851 |
} |
| 852 |
|
| 853 |
sub manage_selection { |
| 854 |
my ($self, %options) = @_; |
| 855 |
|
| 856 |
$self->{cache_name} = "cache_cisco_" . $options{snmp}->get_hostname() . '_' . $options{snmp}->get_port() . '_' . $self->{mode} . '_' . |
| 857 |
(defined($self->{option_results}->{filter_tag}) ? md5_hex($self->{option_results}->{filter_tag}) : md5_hex('all')) . '_' . |
| 858 |
(defined($self->{option_results}->{filter_counters}) ? md5_hex($self->{option_results}->{filter_counters}) : md5_hex('all')); |
| 859 |
|
| 860 |
$self->{results} = $options{snmp}->get_multiple_table( |
| 861 |
oids => [ |
| 862 |
{ oid => $oid_rttMonCtrlAdminEntry, end => $mapping->{rttMonCtrlAdminStatus}->{oid} }, |
| 863 |
{ oid => $oid_rttMonEchoAdminPrecision }, |
| 864 |
{ oid => $oid_rttMonLatestRttOperEntry, end => $mapping3->{rttMonLatestRttOperApplSpecificSense}->{oid} }, |
| 865 |
{ oid => $oid_rttMonJitterStatsEntry }, |
| 866 |
], |
| 867 |
nothing_quit => 1 |
| 868 |
); |
| 869 |
|
| 870 |
$self->{tag} = {}; |
| 871 |
foreach my $oid ($options{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_rttMonCtrlAdminEntry}})) { |
| 872 |
next if ($oid !~ /^$mapping->{rttMonCtrlAdminTag}->{oid}\.(.*)$/); |
| 873 |
my $instance = $1; |
| 874 |
my $result = $options{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_rttMonCtrlAdminEntry}, instance => $instance); |
| 875 |
$result->{rttMonCtrlAdminTag} = defined($result->{rttMonCtrlAdminTag}) && $result->{rttMonCtrlAdminTag} ne '' ? $result->{rttMonCtrlAdminTag} : $instance; |
| 876 |
my $tag_name = $result->{rttMonCtrlAdminTag}; |
| 877 |
if (!defined($tag_name) || $tag_name eq '') { |
| 878 |
$self->{output}->output_add(long_msg => "skipping: please set a tag name"); |
| 879 |
next; |
| 880 |
} |
| 881 |
if (defined($self->{tag}->{$tag_name})) { |
| 882 |
$self->{output}->output_add(long_msg => "skipping '" . $tag_name . "': duplicate (please change the tag name)."); |
| 883 |
next; |
| 884 |
} |
| 885 |
if (defined($self->{option_results}->{filter_tag}) && $self->{option_results}->{filter_tag} ne '' && |
| 886 |
$tag_name !~ /$self->{option_results}->{filter_tag}/) { |
| 887 |
$self->{output}->output_add(long_msg => "skipping '" . $tag_name . "': no matching filter."); |
| 888 |
next; |
| 889 |
} |
| 890 |
$self->{tag}->{$tag_name} = { %{$result} }; |
| 891 |
$result = $options{snmp}->map_instance(mapping => $mapping2, results => $self->{results}->{$oid_rttMonEchoAdminPrecision}, instance => $instance); |
| 892 |
$self->{tag}->{$tag_name} = { %{$result}, %{$self->{tag}->{$tag_name}} }; |
| 893 |
$result = $options{snmp}->map_instance(mapping => $mapping3, results => $self->{results}->{$oid_rttMonLatestRttOperEntry}, instance => $instance); |
| 894 |
$self->{tag}->{$tag_name} = { %{$result}, %{$self->{tag}->{$tag_name}} }; |
| 895 |
|
| 896 |
# there are two entries with rotation: 1 -> last hour, 2 -> current hour. |
| 897 |
foreach my $key (keys %{$oids_jitter_stats}) { |
| 898 |
$self->{tag}->{$tag_name}->{$key . '_1'} = 0; |
| 899 |
$self->{tag}->{$tag_name}->{$key . '_2'} = 0; |
| 900 |
my $i = 1; |
| 901 |
my $instances = []; |
| 902 |
foreach my $oid2 ($options{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_rttMonJitterStatsEntry}})) { |
| 903 |
next if ($oid2 !~ /^$oids_jitter_stats->{$key}\.$instance.(\d+)/); |
| 904 |
push @{$instances}, $1; |
| 905 |
$self->{tag}->{$tag_name}->{$key . '_' . $i} = $self->{results}->{$oid_rttMonJitterStatsEntry}->{$oid2}; |
| 906 |
$i++; |
| 907 |
} |
| 908 |
$self->{tag}->{$tag_name}->{$key . '_times'} = join('_', @{$instances}); |
| 909 |
} |
| 910 |
} |
| 911 |
|
| 912 |
if (scalar(keys %{$self->{tag}}) <= 0) { |
| 913 |
$self->{output}->add_option_msg(short_msg => "No entry found."); |
| 914 |
$self->{output}->option_exit(); |
| 915 |
} |
| 916 |
} |
| 917 |
|
| 918 |
sub get_severity { |
| 919 |
my ($self, %options) = @_; |
| 920 |
my $status = 'UNKNOWN'; # default |
| 921 |
|
| 922 |
if (defined($self->{overload_th}->{$options{section}})) { |
| 923 |
foreach (@{$self->{overload_th}->{$options{section}}}) { |
| 924 |
if ($options{value} =~ /$_->{filter}/i) { |
| 925 |
$status = $_->{status}; |
| 926 |
return $status; |
| 927 |
} |
| 928 |
} |
| 929 |
} |
| 930 |
foreach (@{$thresholds->{$options{section}}}) { |
| 931 |
if ($options{value} =~ /$$_[0]/i) { |
| 932 |
$status = $$_[1]; |
| 933 |
return $status; |
| 934 |
} |
| 935 |
} |
| 936 |
|
| 937 |
return $status; |
| 938 |
} |
| 939 |
|
| 940 |
1; |
| 941 |
|
| 942 |
__END__ |
| 943 |
|
| 944 |
=head1 MODE |
| 945 |
|
| 946 |
Check RTT Controls (CISCO-RTT-MON) |
| 947 |
|
| 948 |
=over 8 |
| 949 |
|
| 950 |
=item B<--filter-tag> |
| 951 |
|
| 952 |
Filter tag (default: '.*') |
| 953 |
|
| 954 |
=item B<--threshold-overload> |
| 955 |
|
| 956 |
Use this option to override the status returned by the plugin when the status label matches a regular expression (syntax: section,status,regexp). |
| 957 |
Example: --threshold-overload='opersense,CRITICAL,^(?!(ok)$)' |
| 958 |
|
| 959 |
=item B<--warning-*> |
| 960 |
|
| 961 |
Warning threshold. |
| 962 |
Can be: 'CompletionTime', 'NumberOverThresholds', 'AverageDelaySD', 'AverageDelayDS', 'PacketLossRatio', |
| 963 |
'PercentagePacketsPositiveJitter', 'AverageJitterPerPacketPositiveJitter', 'PercentagePacketsNegativeJitter', 'AverageJitterPerPacketNegativeJitter', |
| 964 |
'AverageJitter', 'RTTStandardDeviation', 'DelaySource2DestinationStandardDeviation', 'DelayDestination2SourceStandardDeviation', |
| 965 |
'JitterSource2DestinationStandardDeviation', 'JitterDestination2SourceStandardDeviation'. |
| 966 |
|
| 967 |
=item B<--critical-*> |
| 968 |
|
| 969 |
Critical threshold. |
| 970 |
Can be: 'CompletionTime', 'NumberOverThresholds', 'AverageDelaySD', 'AverageDelayDS', 'PacketLossRatio', |
| 971 |
'PercentagePacketsPositiveJitter', 'AverageJitterPerPacketPositiveJitter', 'PercentagePacketsNegativeJitter', 'AverageJitterPerPacketNegativeJitter', |
| 972 |
'AverageJitter', 'RTTStandardDeviation', 'DelaySource2DestinationStandardDeviation', 'DelayDestination2SourceStandardDeviation', |
| 973 |
'JitterSource2DestinationStandardDeviation', 'JitterDestination2SourceStandardDeviation'. |
| 974 |
|
| 975 |
=back |
| 976 |
|
| 977 |
=cut |
| 978 |
|