Debian Codegraph @

src/centreon/common/cisco/standard/snmp/mode/environment.pm

raw
1 #
2 # Copyright 2024 Centreon (http://www.centreon.com/)
3 #
4 # Centreon is a full-fledged industry-strength solution that meets
5 # the needs in IT infrastructure and application monitoring for
6 # service performance.
7 #
8 # Licensed under the Apache License, Version 2.0 (the "License");
9 # you may not use this file except in compliance with the License.
10 # You may obtain a copy of the License at
11 #
12 # http://www.apache.org/licenses/LICENSE-2.0
13 #
14 # Unless required by applicable law or agreed to in writing, software
15 # distributed under the License is distributed on an "AS IS" BASIS,
16 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 # See the License for the specific language governing permissions and
18 # limitations under the License.
19 #
20
21 package centreon::common::cisco::standard::snmp::mode::environment;
22
23 use base qw(centreon::plugins::templates::hardware);
24
25 use strict;
26 use warnings;
27 use centreon::plugins::misc;
28
29 sub set_system {
30 my ($self, %options) = @_;
31
32 $self->{regexp_threshold_numeric_check_section_option} = '^(temperature|voltage|sensor.*)$';
33
34 $self->{cb_hook2} = 'snmp_execute';
35
36 $self->{thresholds} = {
37 fan => [
38 ['normal', 'OK'],
39 ['warning', 'WARNING'],
40 ['critical', 'CRITICAL'],
41 ['shutdown', 'CRITICAL'],
42 ['not present', 'OK'],
43 ['not functioning', 'WARNING'],
44
45 ['unknown', 'UNKNOWN'],
46 ['down', 'CRITICAL'],
47 ['up', 'OK']
48 ],
49 psu => [
50 ['normal', 'OK'],
51 ['warning', 'WARNING'],
52 ['critical', 'CRITICAL'],
53 ['shutdown', 'CRITICAL'],
54 ['not present', 'OK'],
55 ['not functioning', 'WARNING'],
56
57 ['^off*', 'WARNING'],
58 ['failed', 'CRITICAL'],
59 ['onButFanFail|onButInlinePowerFail', 'WARNING'],
60 ['on', 'OK']
61 ],
62 temperature => [
63 ['normal', 'OK'],
64 ['warning', 'WARNING'],
65 ['critical', 'CRITICAL'],
66 ['shutdown', 'CRITICAL'],
67 ['not present', 'OK'],
68 ['not functioning', 'WARNING']
69 ],
70 voltage => [
71 ['normal', 'OK'],
72 ['warning', 'WARNING'],
73 ['critical', 'CRITICAL'],
74 ['shutdown', 'CRITICAL'],
75 ['not present', 'OK'],
76 ['not functioning', 'WARNING']
77 ],
78 module => [
79 ['unknown|mdr', 'UNKNOWN'],
80 ['disabled|okButDiagFailed|missing|mismatchWithParent|mismatchConfig|dormant|outOfServiceAdmin|outOfServiceEnvTemp|powerCycled|okButPowerOverWarning|okButAuthFailed|fwMismatchFound|fwDownloadFailure', 'WARNING'],
81 ['failed|diagFailed|powerDenied|okButPowerOverCritical', 'CRITICAL'],
82 ['boot|selfTest|poweredUp|syncInProgress|upgrading|fwDownloadSuccess|ok|poweredDown', 'OK']
83 ],
84 physical => [
85 ['other', 'UNKNOWN'],
86 ['incompatible|unsupported', 'CRITICAL'],
87 ['supported', 'OK']
88 ],
89 sensor => [
90 ['ok', 'OK'],
91 ['unavailable', 'OK'],
92 ['nonoperational', 'CRITICAL']
93 ]
94 };
95
96 $self->{components_path} = 'centreon::common::cisco::standard::snmp::mode::components';
97 $self->{components_module} = ['fan', 'psu', 'temperature', 'voltage', 'module', 'physical', 'sensor'];
98 }
99
100 my $oid_ciscoEnvMonPresent = '.1.3.6.1.4.1.9.9.13.1.1';
101
102 my %map_type_mon = (
103 1 => 'oldAgs',
104 2 => 'ags',
105 3 => 'c7000',
106 4 => 'ci',
107 6 => 'cAccessMon',
108 7 => 'cat6000',
109 8 => 'ubr7200',
110 9 => 'cat4000',
111 10 => 'c10000',
112 11 => 'osr7600',
113 12 => 'c7600',
114 13 => 'c37xx',
115 14 => 'other'
116 );
117
118 sub snmp_execute {
119 my ($self, %options) = @_;
120
121 $self->{snmp} = $options{snmp};
122 $self->{physical_name} = defined($self->{option_results}->{use_physical_name}) ? '.1.3.6.1.2.1.47.1.1.1.1.7' : '.1.3.6.1.2.1.47.1.1.1.1.2';
123
124 push @{$self->{request}}, { oid => $self->{physical_name} }, { oid => $oid_ciscoEnvMonPresent };
125 $self->{results} = $self->{snmp}->get_multiple_table(oids => $self->{request});
126 while (my ($key, $value) = each %{$self->{results}->{ $self->{physical_name} }}) {
127 $self->{results}->{ $self->{physical_name} }->{$key} = centreon::plugins::misc::trim($value);
128 }
129 $self->{output}->output_add(
130 long_msg => sprintf(
131 'Environment type: %s',
132 defined($self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}) && defined($map_type_mon{$self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}} ) ?
133 $map_type_mon{$self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}} : 'unknown'
134 )
135 );
136 }
137
138 sub new {
139 my ($class, %options) = @_;
140 my $self = $class->SUPER::new(package => __PACKAGE__, %options);
141 bless $self, $class;
142
143 $options{options}->add_options(arguments => {
144 'use-physical-name' => { name => 'use_physical_name' },
145 'add-fru-power' => { name => 'add_fru_power' }
146 });
147
148 return $self;
149 }
150
151 1;
152
153 __END__
154
155 =head1 MODE
156
157 Check environment (Power Supplies, Fans, Temperatures, Voltages, Modules, Physical Entities).
158
159 =over 8
160
161 =item B<--component>
162
163 Which component to check (default: '.*').
164 Can be: 'fan', 'psu', 'temperature', 'voltage', 'module', 'physical', 'sensor'.
165
166 =item B<--filter>
167
168 Exclude the items given as a comma-separated list (example: --filter=fan --filter=psu).
169 You can also exclude items from specific instances: --filter=fan,1
170
171 =item B<--add-name-instance>
172
173 Add literal description for instance value (used in filter, absent-problem and threshold options).
174
175 =item B<--use-physical-name>
176
177 Use entPhysicalName OID instead of entPhysicalDescr.
178
179 =item B<--add-fru-power>
180
181 Check FRU power status.
182
183 =item B<--absent-problem>
184
185 Return an error if an entity is not 'present' (default is skipping) (comma separated list)
186 Can be specific or global: --absent-problem=fan,1
187
188 =item B<--no-component>
189
190 Define the expected status if no components are found (default: critical).
191
192
193 =item B<--threshold-overload>
194
195 Use this option to override the status returned by the plugin when the status label matches a regular expression (syntax: section,status,regexp).
196 Example: --threshold-overload='fan,CRITICAL,^(?!(up|normal)$)'
197
198 =item B<--warning>
199
200 Set warning threshold for temperatures, voltages, sensors (syntax: type,regexp,threshold)
201 Example: --warning='temperature,.*,30'
202
203 =item B<--critical>
204
205 Set critical threshold for temperatures, voltages, sensors (syntax: type,regexp,threshold)
206 Example: --critical='temperature,.*,40'
207
208 =back
209
210 =cut