| 1 |
Indirect Fourier Transform (IFT) and the P(r) function |
| 2 |
---------------------------------------------------------- |
| 3 |
.. _saxs_ift: |
| 4 |
|
| 5 |
This tutorial covers basic principles and best practices for doing an |
| 6 |
Indirect Fourier Transform (IFT) to get a P(r) function. This is not a tutorial |
| 7 |
on how to use RAW for this type of analysis. For that, please see |
| 8 |
the RAW tutorial for :ref:`GNOM <s2p1>` and :ref:`BIFT <bift_tutorial>`. |
| 9 |
|
| 10 |
|
| 11 |
Overview |
| 12 |
^^^^^^^^^^^^^^^^^ |
| 13 |
|
| 14 |
The SAXS scattering profile is measured in reciprocal distance space, as |
| 15 |
I(q) where *q* has units of one over distance (usually 1/Angstrom or |
| 16 |
1/nm). We can apply a Fourier transform to the data to get information |
| 17 |
in real space about the macromolecule, as: |
| 18 |
|
| 19 |
.. math:: |
| 20 |
|
| 21 |
P(r) = \frac{r^2}{2\pi^2} \int_0^{\infty} q^2I(q) \frac{\sin(qr)}{qr}dq |
| 22 |
|
| 23 |
This produces the P(r) function, also called the pair distance distribution function. |
| 24 |
Essentially, the P(r) function is the r\ :sup:`2` weighted histogram of all |
| 25 |
possible pairs of electrons in the sample. |
| 26 |
|
| 27 |
Why do we do an IFT? |
| 28 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 29 |
|
| 30 |
The P(r) function contains valuable information about the shape and size of |
| 31 |
a macromolecule. First, in doing the P(r) function we get an estimate of the |
| 32 |
maximum dimension of the macromolecule (|Dmax|). It also provides another, potentially |
| 33 |
more accurate, way to calculate the |Rg| and I(0). The shape of the P(r) function |
| 34 |
can also be directly interpreted in terms of the shape of the macromolecule, |
| 35 |
providing information about the overall shape, such as globular vs. rod-like, |
| 36 |
or whether the macromolecule contains multiple domains. Also, the P(r) function |
| 37 |
and derived parameters such as |Dmax| are required for many advanced analysis |
| 38 |
techniques including ab-initio reconstructions of the shape. |
| 39 |
|
| 40 |
Additionally, the P(r) function is sensitive to data quality issues, particularly |
| 41 |
aggregation and interparticle interference. Thus, doing an IFT is another |
| 42 |
quality check on your data. If you cannot obtain a good P(r) function, then |
| 43 |
your data probably has one of those issues and usually should not be used for |
| 44 |
further analysis. |
| 45 |
|
| 46 |
|
| 47 |
How do we do an IFT? |
| 48 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 49 |
|
| 50 |
The equation above cannot be used to directly calculate the P(r) function. |
| 51 |
The finite extent of our measurement (and measurement noise) means that a |
| 52 |
direct Fourier transform of I(q) will distort the true P(r) function by |
| 53 |
introducing truncation artifacts. Instead, the typical approach is to |
| 54 |
fit the P(r) function against the data. First, you generate the scattering |
| 55 |
intensity for a given P(r) function as: |
| 56 |
|
| 57 |
.. math:: |
| 58 |
|
| 59 |
I(q) = 4\pi \int_0^{D_{max}} P(r) \frac{\sin(qr)}{qr}dr |
| 60 |
|
| 61 |
Using this equation you generate the P(r) function that yields the best fit |
| 62 |
to the data. The fitting criteria include both the actual fit, usually as measured |
| 63 |
by :math:`\chi^2`, and regularization parameters. These regularization parameters |
| 64 |
allow you to add back in information to improve the P(r) function. Typical |
| 65 |
examples of the regularization parameters include perceptual criteria such as: |
| 66 |
|
| 67 |
* Smoothness of the P(r) function. |
| 68 |
* Positivity of the P(r) function. |
| 69 |
* Whether the solution changes significantly when changing the weighting of |
| 70 |
the regularization parameters. |
| 71 |
|
| 72 |
Determining a P(r) function in this way thus requires determining three things: |
| 73 |
|
| 74 |
#. The maximum dimension, |Dmax|, of the sample, as that determines the upper |
| 75 |
bound of the integral above. |
| 76 |
#. The weighting parameter, usually called :math:`\alpha`, that determines |
| 77 |
the relative contribution of :math:`\chi^2` and the perceptual criteria |
| 78 |
to the overall fit quality. |
| 79 |
#. The P(r) function that yields the best fit to the data, given the |
| 80 |
particular |Dmax| and :math:`\alpha` values. |
| 81 |
|
| 82 |
This is a complicated problem, and there are a number of different programs |
| 83 |
out there for finding a P(r) function. These programs all typically involve |
| 84 |
searching a set of possible |Dmax| values and :math:`\alpha` values to find |
| 85 |
which yields the best overall fit. RAW natively supports one method for |
| 86 |
finding the P(r) function, the Bayesian Indirect Fourier Transform (BIFT) |
| 87 |
[1], which provides a completely automated determination of |Dmax| |
| 88 |
and :math:`\alpha`. |
| 89 |
|
| 90 |
The most popular method for determining the P(r) function is the GNOM [2] software |
| 91 |
in the ATSAS package, which RAW provides an interface to if ATSAS is installed. |
| 92 |
Below we discuss how to determine a good P(r) function using GNOM, after discussing |
| 93 |
the criteria for a good P(r) function. |
| 94 |
|
| 95 |
Criteria for a good P(r) function |
| 96 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 97 |
|
| 98 |
We employ the following criteria to determine if a P(r) function is good: |
| 99 |
|
| 100 |
#. **The P(r) function falls gradually to zero at** :math:`\mathbf{D_{max}}`\ **.** |
| 101 |
#. **The P(r) function fits the measured scattering profile.** |
| 102 |
#. **The P(r) function goes to zero at** :math:`\mathbf{r=0}` |
| 103 |
**and** :math:`\mathbf{r=D_{max}}`\ **.** |
| 104 |
|
| 105 |
Additionally, the following criteria usually apply: |
| 106 |
|
| 107 |
#. **The** :math:`\mathbf{R_{g}}` **and I(0) from the Guinier fit and the P(r) function agree well.** |
| 108 |
#. **The P(r) function is always positive.** |
| 109 |
|
| 110 |
.. figure:: images/pr_good_gi.png |
| 111 |
:target: ../_images/pr_good_gi.png |
| 112 |
|
| 113 |
A P(r) function done in RAW using GNOM for glucose isomerase (available |
| 114 |
in the RAW Tutorial data). This shows what a good P(r) function looks like. |
| 115 |
The function goes smoothly to zero at |Dmax|, it is always positive, |
| 116 |
there is good agreement between the Guinier and P(r) |Rg| and I(0) values, |
| 117 |
and the residuals are mostly flat and randomly distributed. You can see |
| 118 |
a small systematic deviation in the residuals below q~0.125. This |
| 119 |
could be smoothed out by reducing the :math:`\alpha` value, which may be slightly |
| 120 |
over weighting the regularization parameters vs. the actual fit to the |
| 121 |
data. |
| 122 |
|
| 123 |
A more thorough discussion of each criterion is given below. |
| 124 |
|
| 125 |
The P(r) function falls gradually to zero at |Dmax| |
| 126 |
****************************************************** |
| 127 |
|
| 128 |
This is perhaps the most important and most subjective criterion for determining |
| 129 |
whether you have a good P(r) function. The idea is straightforward: macromolecules |
| 130 |
do not have perfectly sharp boundaries. Because they have side chains that stick |
| 131 |
out, and have some amount of flexibility in solution (even if limited to |
| 132 |
solvent exposed side chains), there is no distance at which you go from |
| 133 |
many electrons pairs to no electron pairs within the macromolecule. As such, |
| 134 |
the P(r) function should gradually approach zero at the maximum dimension, |
| 135 |
rather than being cut off. |
| 136 |
|
| 137 |
Essentially, if this criterion is met you have picked an appropriate |Dmax| |
| 138 |
for the system. If you underestimate the |Dmax|, then the P(r) function |
| 139 |
has an abrupt descent to zero, while an overestimated |Dmax| usually |
| 140 |
shows an oscillation about zero. This is shown in the figure below. |
| 141 |
|
| 142 |
.. figure:: images/pr_dmax_variation.png |
| 143 |
:target: ../_images/pr_dmax_variation.png |
| 144 |
:height: 400 px |
| 145 |
|
| 146 |
The left and right plots show three different P(r) functions for the same |
| 147 |
protein (glucose isomerase, available in the RAW Tutorial Data). The |
| 148 |
difference between the three is the |Dmax|, which is either 83 (blue), |
| 149 |
103 (orange) or 123 (green) Angstrom. The left plot shows the full |
| 150 |
P(r) function. The different |Dmax| values yield similar P(r) functions, |
| 151 |
so much so that they end up plotted on top of each other for most of their |
| 152 |
r values. The right plot is the same functions showing just the end, |
| 153 |
as P(r) approaches zero at |Dmax|. |
| 154 |
|
| 155 |
In the plot above, we can clearly see that for a |Dmax| of 83, the P(r) |
| 156 |
function is forced abruptly down. For a |Dmax| of 103, the function has a |
| 157 |
smooth approach to zero. For a |Dmax| of 123 the function reaches zero and |
| 158 |
then oscillates about it. From this we can conclude that 103 is a good |
| 159 |
value for |Dmax|, whereas 83 is underestimated and 123 is overestimated. |
| 160 |
|
| 161 |
The P(r) function fits the measured scattering profile |
| 162 |
*********************************************************** |
| 163 |
|
| 164 |
This criterion is straightforward. The transformation of the P(r) function |
| 165 |
to I(q) should fit the measured scattering profile. This can be evaluated |
| 166 |
both through the :math:`\chi^2` value of the fit, which should be close to 1, |
| 167 |
and the normalized residuals between the fit and the data, which should be flat |
| 168 |
and randomly distributed about zero. |
| 169 |
|
| 170 |
The P(r) function goes to zero at :math:`\mathbf{r=0}` and :math:`\mathbf{r=D_{max}}`. |
| 171 |
**************************************************************************************** |
| 172 |
|
| 173 |
The reason for this criterion is straightforward. The P(r) function |
| 174 |
should go to zero at r=0 because it is the number of electron pairs in the |
| 175 |
macromolecule. As r decreases, the number of electron pairs |
| 176 |
decreases until you reach an r smaller than the size of an electron, |
| 177 |
at which point there are no pairs left and thus P(r) must go to zero at |
| 178 |
:math:`r=0`. The P(r) function should go to zero at :math:`r=D_{max}` |
| 179 |
because |Dmax| is the maximum dimension of the particle. Beyond that distance |
| 180 |
there should be no electron pairs in the particle. This criterion is usually |
| 181 |
enforced by conditions in the IFT calculation. |
| 182 |
|
| 183 |
The |Rg| and I(0) from the Guinier fit and the P(r) function agree well |
| 184 |
*************************************************************************** |
| 185 |
|
| 186 |
The |Rg| and I(0) values can be determined directly from the P(r) function. |
| 187 |
This provides a complementary approach to the Guinier fit. For well behaved |
| 188 |
rigid systems, |Rg| and I(0) should agree well between both methods. If |
| 189 |
they do not, it may suggest a problem in either the Guinier fit or the |
| 190 |
P(r) function. However, for flexible and disordered systems, it has been |
| 191 |
observed that the P(r) |Rg| and I(0) values are characteristically larger, |
| 192 |
and more reliable, than the Guinier |Rg| and I(0) values [3]. |
| 193 |
|
| 194 |
|
| 195 |
The P(r) function is always positive |
| 196 |
************************************* |
| 197 |
|
| 198 |
This criterion usually applies, as for most macromolecules the presence of a negative |
| 199 |
number of electron pairs has no meaning. However, when dealing with membrane |
| 200 |
proteins that are encapsulated in lipids or detergents, this criterion is no |
| 201 |
longer valid. In those cases, the lipid/detergent may have a lower electron |
| 202 |
density than the buffer. As scattering is measured relative to the solvent, |
| 203 |
this lower density will appear as negative electron pairs in the P(r) function. |
| 204 |
For example, proteins embedded in lipid nanodiscs have a characteristic dip |
| 205 |
in the P(r) function that can go negative. |
| 206 |
|
| 207 |
|
| 208 |
Determining a good P(r) function using GNOM |
| 209 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 210 |
|
| 211 |
While it takes some practice to learn how to properly evaluate the P(r) function, |
| 212 |
there is a set of steps that I regularly follow when creating a P(r) function |
| 213 |
using GNOM via the RAW interface: |
| 214 |
|
| 215 |
#. Open the GNOM interface. It defaults to what GNOM thinks is a reasonable |
| 216 |
|Dmax| (using datgnom). |
| 217 |
#. If necessary, set the starting q value for the P(r) function to match |
| 218 |
that of the Guinier fit (newer versions of RAW do this automatically). |
| 219 |
#. Set the |Dmax| value to 2-3 times larger than the initial value. |
| 220 |
#. Look for where the P(r) function drops to 0 naturally. Set the |Dmax| |
| 221 |
value to this point. |
| 222 |
#. Turn off the force to zero at |Dmax| condition. |
| 223 |
#. Tweak |Dmax| up and down until it naturally goes to zero (with the force |
| 224 |
to zero turned off). |
| 225 |
#. Turn the force to zero at |Dmax| condition back on. |
| 226 |
#. If needed, truncate the P(r) function to a maximum q of 8/R\ :sub:`g`, |
| 227 |
or 0.25-0.3 1/Angstrom, whichever is smaller, if using for bead model |
| 228 |
reconstructions with DAMMIF/N. You may have to tweak the |Dmax| a bit after |
| 229 |
truncation. |
| 230 |
|
| 231 |
If you have good quality data, this ought to produce a good P(r) function. |
| 232 |
|
| 233 |
Note that even for good quality data with a mostly rigid globular macromolecule |
| 234 |
like glucose isomerase (shown in the plots above), there usually isn't a single |
| 235 |
right value of |Dmax|. For this data, a best case scenario, you could reasonably |
| 236 |
pick a |Dmax| value from ~99-104, which is a 5% variation. For macromolecules |
| 237 |
with more flexibility, |Dmax| is even more poorly defined. As a rule of thumb, |
| 238 |
|Dmax| is usually never determined to better than 5%, sometimes the uncertainty |
| 239 |
is closer to 10%. |
| 240 |
|
| 241 |
Other tips: |
| 242 |
|
| 243 |
* If the residual has too much systematic deviation, you can manually set |
| 244 |
the :math:`\alpha` to something smaller than the automatic value. Start |
| 245 |
with half the automatically determined value, and tweak from there. |
| 246 |
|
| 247 |
* Don't forget to check that the |Rg| and I(0) values agree (if you have a |
| 248 |
rigid system). Generally speaking, increasing |Dmax| will increase |
| 249 |
the P(r) |Rg| and I(0) values, so that can help guide your choice of |Dmax|. |
| 250 |
|
| 251 |
* Don't truncate your P(r) function for electron density reconstructions |
| 252 |
with DENSS. |
| 253 |
|
| 254 |
|
| 255 |
What is a bad P(r) function, and what does it mean? |
| 256 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 257 |
|
| 258 |
Even if you follow all of the guidelines above, sometimes you can end up with |
| 259 |
a bad P(r) function. Typically what bad means is one of two things: |
| 260 |
|
| 261 |
#. You can't find a good |Dmax| value. You keep increasing |Dmax| and the P(r) |
| 262 |
function never smoothly goes to zero. |
| 263 |
|
| 264 |
#. If you increase |Dmax| the P(r) function goes negative. |
| 265 |
|
| 266 |
In these cases, it is most likely that your data has a problem. The figure |
| 267 |
below gives a quick summary of the most common pathologies, more detail is |
| 268 |
available in the sections below. |
| 269 |
|
| 270 |
.. figure:: images/pr_overview_jacques.png |
| 271 |
:target: ../_images/pr_overview_jacques.png |
| 272 |
|
| 273 |
Figure 3 from [4]. A, G, and J show a good (monodisperse) scattering profile |
| 274 |
and P(r) function. B, H, and K show a scattering profile and P(r) function with |
| 275 |
varying degrees of interparticle interference. C, I, and L show a scattering |
| 276 |
profile and P(r) function with varying degrees of aggregation. the middle row |
| 277 |
shows the effect on the P(r) function, while the last row shows that to |
| 278 |
really judge the effect of the change on the P(r) function you should extend |
| 279 |
the |Dmax| value out significantly. |
| 280 |
|
| 281 |
Note that both pathologies are easiest to see when you plot the P(r) function well |
| 282 |
past the point where you think the correct |Dmax| value is (panels J-L in the |
| 283 |
above figure). This means that it is important to always extend the |Dmax| value |
| 284 |
when generating your P(r) function to verify that the P(r) function stays flat |
| 285 |
and close to zero (usually small oscillations about zero), as in panel J, rather |
| 286 |
than dipping negative (panel K, repulsive interparticle interference) or |
| 287 |
staying slightly positive (panel L, aggregation). |
| 288 |
|
| 289 |
Aggregation |
| 290 |
************* |
| 291 |
|
| 292 |
Aggregation in solution means some amount of larger particles are present. |
| 293 |
The presence of these larger particles causes the |Dmax| to be hard to |
| 294 |
determine. Typically this manifests as there being a significantly extended tail |
| 295 |
on the P(r) distribution, which does not fall to zero naturally regardless of the |
| 296 |
chosen |Dmax|. The P(r) function calculated |Rg| and I(0) will also be larger |
| 297 |
than they would be for the monodisperse sample. |
| 298 |
|
| 299 |
Small amounts of aggregation can look similar to the P(r) function for a flexible |
| 300 |
system, so other methods should be used to determine the true state of the system. |
| 301 |
The Guinier analysis will usually reveal the presence of aggregates, and Kratky |
| 302 |
plot will show if the system is flexible. If you are unsure whether your P(r) |
| 303 |
function is showing aggregation or flexibility, check with these other techniques. |
| 304 |
|
| 305 |
|
| 306 |
Interparticle interference |
| 307 |
****************************** |
| 308 |
|
| 309 |
Interparticle interference usually manifests as repulsion in solution. This |
| 310 |
repulsive effect manifests as an artificially small |Dmax|. The P(r) function |
| 311 |
calculated |Rg| and I(0) values are reduced compared to what they would be |
| 312 |
for the non-interacting sample. |
| 313 |
|
| 314 |
Since you usually don't know the |Dmax| of your sample prior to making the |
| 315 |
measurement, it can be hard to tell if the |Dmax| is artificially small. In |
| 316 |
this case, the easiest way to see this effect is to extend the |Dmax| out past |
| 317 |
what you found to be a 'good' |Dmax|. If the P(r) function goes and stays negative, |
| 318 |
as in K of the above figure, then you have a repulsive interaction. If it stays |
| 319 |
near zero (possibly with some small oscillation about zero), as in J of the |
| 320 |
above figure, then you are not seeing a repulsive interaction. |
| 321 |
|
| 322 |
|
| 323 |
|
| 324 |
How to interpret features of a P(r) function |
| 325 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| 326 |
|
| 327 |
The P(r) function provides a significant amount of information on particle |
| 328 |
shape and size in solution. The easiest parameters to interpret are the |
| 329 |
|Dmax|, |Rg|, and I(0), which all inform on particle size. The |Dmax| is simply |
| 330 |
the maximum dimension of the particle. The |Rg| is the radius of gyration, |
| 331 |
and I(0) is the scattering at zero angle, which is proportional to the |
| 332 |
molecular weight and concentration. Beyond these parameters, the shape of |
| 333 |
the P(r) function contains significant information about the particle shape. |
| 334 |
This is seen clearly in the plot of P(r) functions for different |
| 335 |
geometric bodies shown below. |
| 336 |
|
| 337 |
.. figure:: images/pr_shapes.png |
| 338 |
:target: ../_images/pr_shapes.png |
| 339 |
|
| 340 |
P(r) functions for geometric bodies, adapted from figure 5 of [5]. |
| 341 |
|
| 342 |
In the above figure, there are several things worth noting: |
| 343 |
|
| 344 |
#. In the P(r) function for a long rod, the initial peak at short distance |
| 345 |
comes from electron pairs across the short dimension of the rod. The long |
| 346 |
extend tail comes from electron pairs along the length of the rod. |
| 347 |
#. In the P(r) function for a dumbbell, the peak at lower r comes from the |
| 348 |
electron pairs within each individual domain of the dumbbell. The peak |
| 349 |
at longer distance comes from the electron pairs between the two domains |
| 350 |
of the dumbbell. |
| 351 |
#. For the hollow sphere, the peak at long distance is coming from the electron |
| 352 |
pairs across the diameter of the sphere. |
| 353 |
|
| 354 |
|
| 355 |
While macromolecules do not have P(r) functions that exactly match those of |
| 356 |
geometric bodies, the dominant features of the P(r) function can be used to |
| 357 |
determine overall shape characteristics of the macromolecule. Most usefully: |
| 358 |
|
| 359 |
* Globular proteins tend to have P(r) functions similar to that of a solid |
| 360 |
sphere. |
| 361 |
* Long rigid rod-like systems, like duplex DNA, have P(r) functions very |
| 362 |
similar to that of a long rod. |
| 363 |
* Multi-domain proteins have two peaks, like that of a dumbbell. However, |
| 364 |
as the domains are not usually symmetric in size or widely separated, |
| 365 |
the peaks are usually more of a strong peak and an overlapping shoulder |
| 366 |
peak. |
| 367 |
|
| 368 |
The plot below shows the P(r) function for several actual macromolecules. |
| 369 |
|
| 370 |
.. figure:: images/pr_protein_shapes.png |
| 371 |
:target: ../_images/pr_protein_shapes.png |
| 372 |
:width: 500 px |
| 373 |
|
| 374 |
P(r) functions for flexible (unfolded), multidomain, and globular proteins. |
| 375 |
Figure 24 in [6]. |
| 376 |
|
| 377 |
|
| 378 |
FAQ |
| 379 |
^^^^^^^^ |
| 380 |
|
| 381 |
Is a small change in |Dmax| significant? |
| 382 |
********************************************* |
| 383 |
|
| 384 |
Small changes in |Dmax| are usually not significant. Even for good quality data |
| 385 |
with a mostly rigid globular macromolecule like glucose isomerase (shown in the |
| 386 |
plots above), you could reasonably pick a |Dmax| value from ~99-104, which is |
| 387 |
a 5% variation. For macromolecules with more flexibility, |Dmax| is even more |
| 388 |
poorly defined. As a rule of thumb, |Dmax| is usually never determined to |
| 389 |
better than 5%, sometimes the uncertainty is closer to 10%. |
| 390 |
|
| 391 |
My P(r) function goes negative. Is that okay? |
| 392 |
************************************************* |
| 393 |
|
| 394 |
Generally speaking, no. However, if you have a system that is detergent or lipid |
| 395 |
bound, such as a protein embedded in a nanodisc, then you may see a negative |
| 396 |
dip in your P(r) function. |
| 397 |
|
| 398 |
|
| 399 |
|
| 400 |
References |
| 401 |
^^^^^^^^^^^^ |
| 402 |
|
| 403 |
1. Hansen, S. J. Appl. Crystallogr.(2000) 33, 1415-1421. DOI: |
| 404 |
`10.1107/S0021889800012930 <https://doi.org/10.1107/S0021889800012930>`_ |
| 405 |
|
| 406 |
2. Svergun D.I. (1992). J. Appl. Crystallogr. 25, 495-503. DOI: |
| 407 |
`10.1107/S0021889892001663 <https://doi.org/10.1107/S0021889892001663>`_ |
| 408 |
|
| 409 |
3. Kikhney, A. G. & Svergun, D. I. (2015). FEBS Lett. 589, 2570–2577. DOI: |
| 410 |
`10.1016/j.febslet.2015.08.027 <https://doi.org/10.1016/j.febslet.2015.08.027>`_ |
| 411 |
|
| 412 |
4. Jacques, D. A. & Trewhella, J. (2010). Protein Sci. 19, 642–657. |
| 413 |
DOI: `10.1002/pro.35 <https://doi.org/10.1002/pro.351>`_ |
| 414 |
|
| 415 |
5. Svergun, D. I. & Koch, M. H. J. (2003). Reports Prog. Phys. 66, 1735–1782. |
| 416 |
DOI: `10.1088/0034-4885/66/10/R05 <https://doi.org/10.1088/0034-4885/66/10/R05>`_ |
| 417 |
|
| 418 |
6. Putnam, C. D., Hammel, M., Hura, G. L. & Tainer, J. a (2007). Q. Rev. |
| 419 |
Biophys. 40, 191–285. DOI: `10.1017/S0033583507004635 |
| 420 |
<https://doi.org/10.1017/S0033583507004635>`_ |
| 421 |
|
| 422 |
.. |Rg| replace:: R\ :sub:`g` |
| 423 |
|
| 424 |
.. |Dmax| replace:: D\ :sub:`max` |