Debian Codegraph @

docs/source/changes.rst

raw
1 Changes
2 ============
3
4 2.4.1
5 ----------
6
7 Release date: 2026-01-20
8
9 Overview
10 ^^^^^^^^^^
11
12 The RAW team is pleased to announce the release of RAW version 2.4.1. This is a
13 bug fix release. It also fixes compatibility issues with ATSAS 4.1.3. The
14 other change of note is that it introduces a new workspace save format.
15 Workspaces now save as .hdf5 files. This fixes compatibility issues
16 that could occur with old-style workspaces saved from different versions
17 of RAW. It also results in significantly smaller file sizes for workspaces
18 with series in them. Old style workspace files (.wsp) can still be loaded,
19 but all new workspaces will be saved as .hdf5 files, and those will require
20 RAW version 2.4.1 or newer to load.
21
22 All changes:
23 ^^^^^^^^^^^^^
24 * Workspaces are now saved as hdf5 files, which fixes compatibility issues
25 that could occur with old-style workspaces saved from different versions
26 of RAW. Also results in significantly smaller file sizes for workspaces
27 with series in them.
28 * Fixed a bug where data with calibration input values outside of the
29 selected calibration data range would cause an uncaught error in the
30 multi-series analysis processing.
31 * Added ability to toggle calibration on/off for multi-series analysis.
32 * Added a check as to whether all series are equal length before loading
33 the series in the multi-series analysis panel.
34 * Fixed a bug that would occur when using loaded settings for multi-series
35 analysis on linux and windows.
36 * Fixed a bug on linux and windows where after doing multi-series analysis
37 you wouldn't be able to star an item in the series control panel.
38 * Added autoloading for old-style BioCAT filenames to the multi-series
39 analysis panel.
40 * Fixed compatibility issues with ATSAS 4.1.3.
41 * Added save and load workspace functions to the API.
42
43
44 2.4.0
45 ----------
46
47 Release date: 2025-11-19
48
49 Overview
50 ^^^^^^^^^^
51
52 The RAW team is pleased to announce the release of RAW version 2.4.0. This
53 release has a new Multi-series analysis module that can be used to carry out
54 profile by profile averaging, subtraction, and manipulation such as q binning
55 and truncation on multiple series at once. This is useful for example to carry
56 out point-by-point buffer subtraction for an IEC-SAXS elution where you measured
57 a matching buffer gradient or to carry out more complicated analysis of time-resolved
58 SAXS data. Further details can be found here: :ref:`Multi-series analysis
59 tutorial.<multiseries>`
60
61 Special thanks to Dr. Tom Grant who updated DENSS to the latest version.
62
63 All changes:
64 ^^^^^^^^^^^^^
65 * New multi-series analysis window.
66 * Fixed a bug that could cause hdf5 files to fail to load.
67 * Fixed a bug where integrating images from highly tilted detectors could fail.
68 * Added ability to load series hdf5 files from the load/online mode section
69 of the series control panel.
70 * Fixed an error in Vc MW calculation with 1/nm units (either defined or inferred).
71 * Fixed a bug where superimpose failed if q vectors are not the same.
72 * Fixed a bug where the set_sample_range api function would fail for series
73 with the alread_subtracted flag set.
74 * Fixed a bug where workspaces could fail to load.
75 * Fixed a bug where baseline range controls didn't properly update limits when
76 a new range was set.
77 * Fixed a bug where settings might not be picklable, which affected
78 multiprocessing applications.
79 * Fixed a bug where series range might not display correctly if the start and
80 end points of the range were the same.
81 * Updated DENSS and associated tools to the latest version.
82 * Fixed a bug where calibrant rings could be displayed in the wrong location.
83 * Fixed a bug where the DENSS window could fail to open if ATSAS wasn't found.
84
85 2.3.1
86 ----------
87
88 Release date: 2025-06-30
89
90 Overview
91 ^^^^^^^^^^
92
93 The RAW team is pleased to announce the release of RAW version 2.3.1. This is
94 a bug fix release that fixes several compatibility issues and other known
95 bugs in RAW. The main update for this release is a new Windows 11 specific
96 installer that will hopefully fix issues with the existing Windows installer
97 not working for some Windows 11 computers.
98
99 Other notes:
100
101 * This will be the last version of RAW to have a pre-built installer that
102 supports Windows 10.
103 * The Linux installer now supports a minimum version of Ubuntu 22.04/Debian
104 12.
105 * The MacOS installer now supports a minimum version of MacOS 13 (Ventura).
106
107 All changes:
108 ^^^^^^^^^^^^^
109 * Fixed issues with the plot line picker not working when profiles were
110 moved between plots.
111 * Fixed a bug where GNOM would fail when it received a warning, rather than
112 just when it received an error.
113 * Fixed a bug where opening a GNOM window for a profile with a saved Dmax
114 value would default the Dmax spinner to a float, leading to unexpected
115 precision in the value.
116 * Fixed a bug that prevented EFA or REGALS from running on baseline subtracted
117 data.
118 * Fixed a bug where DENSS align was writing an unwanted log file that would cause
119 errors on Windows.
120 * Fixed an issue with DENSS writing files not in the specified save directory.
121 * Replaced depreciated scipy.integrate.trapz calls.
122 * Added checking for expired ATSAS license for ATSAS >= 4.0.
123 * Fixed compatibility with numpy 2.0 and pyFAI 2025.3.0.
124 * Fixed an issue where autodmax function could spuriously fail to find GNOM.
125 * Fixed an issue where if both .abs and .int are plotted by CRYSOL they could
126 not be returned to the main plot.
127 * Fixed a bug that prevented the ambimeter window from opening with ATSAS version
128 >=4.
129 * Fixed a bug where axes labels were not updated correctly in the LC series
130 analysis window.
131 * Fixed a bug where ambimeter failing to run would raise an error.
132 * Adjusted window sizes for GTK3.
133
134
135 2.3.0
136 ----------
137
138 Release date: 2024-06-29
139
140 Overview
141 ^^^^^^^^^^
142
143 The RAW team is pleased to announce the release of RAW version 2.3.0. Significant
144 changes include:
145
146 * Added the DENSS IFT method, which provides an open-source alternative
147 to GNOM for IFTs with an adjustable Dmax parameter (unlike BIFT, which
148 has a fixed, automatically determined, Dmax).
149 * Added the DENSS PDB2SAS method, which provides an open-source alternative
150 to CRYSOL for predicting scattering profiles from models.
151 * High DPI support for plots on MacOS (requires matplotlib >= 3.9).
152 * High DPI support for the entire program on Windows (requires matplotlib >= 3.9).
153 * Compatibility updates for ATSAS 4.0.
154
155 Special thanks to Dr. Tom Grant, who did the major work on adding in the new DENSS
156 IFT and PDB2SAS functions and documentation (along with developing the methods).
157
158 All changes:
159 ^^^^^^^^^^^^^
160 * Added the DENSS IFT method, which provides an open-source alternative
161 to GNOM for IFTs with adjustable Dmax parameters (unlike BIFT, which
162 has a fixed, automatically determined, Dmax).
163 * Added the DENSS PDB2SAS method, which provides an open-source alternative
164 to CRYSOL for predicting scattering profiles from models.
165 * High DPI support for plots on MacOS (requires matplotlib >= 3.9).
166 * High DPI support for the entire program on Windows (requires matplotlib >= 3.9).
167 * Fixed issues with pip installation.
168 * Fixed an API bug where the averageFrames method of the SECM object wouldn't work
169 on subtracted or baseline corrected series.
170 * Fixed a bug with running GNOM in the API.
171 * Added the dummy atom radius to the dammif/n results csv.
172 * Fixed an issue where CRYSOL could return an error if it didn't find the
173 model file.
174 * Added error dialogs for CRYSOL with more information on the problem.
175 * Fixed matplotlib 3.9 compatibility issues.
176 * Icons on MacOS (light mode) are now high DPI.
177
178
179
180 2.2.2
181 ----------
182
183 Release date: 2024-02-12
184
185 Overview
186 ^^^^^^^^^^
187
188 The RAW team is pleased to announce the release of RAW version 2.2.2. This
189 version is mostly minor bug fixes. Of note is that it includes the citation
190 for the new RAW paper:
191
192 *BioXTAS RAW 2: new developments for a free open-source program for
193 small-angle scattering data reduction and analysis.* J. B. Hopkins.
194 Journal of Applied Crystallography (2024). 57, 194-208.
195 DOI: `10.1107/S1600576723011019 <https://doi.org/10.1107/S1600576723011019>`_
196
197 All changes:
198 ^^^^^^^^^^^^^
199
200 * Fixed several bugs related to using LC analysis, EFA, and REGALS with
201 newer versions of scipy.
202 * Fixed an issue where zero value errors would break the linear baseline
203 correction
204 * Fixed a bug where if the ATSAS path was not found, trying to open the
205 supcomb/cifsup window would result in an error rather than a warning
206 message that ATSAS couldn't be found.
207 * Fixed a bug in automated series loading for MacCHESS header format.
208 * Fixed a bug loading eiger images for the MacCHESS header format.
209 * Removed an extraneous dependence in the requirements files on future.
210 * Added the new RAW paper to the splash screen and about page.
211 * Fixed a bug where setting the q value in the GNOM window range box would
212 cause an error.
213 * Fixed a bug where reports saved when RAW is in dark mode would have
214 dark mode style graphs.
215 * Autocorrelation vectors are now saved with the rest of the EFA and REGALS
216 results.
217 * Fixed a bug with showing one of the EFA and REGALS plots with matplotlib >=3.8.
218 * Fixed a bug where the MW and plot options windows wouldn't open with
219 matplotlib >=3.8.
220 * Fixed an issue where if two or more items in the dimensionless Kratky window
221 had the same name rebinning would only work on the first item.
222 * Fixed an issue where superimpose could fail if the items were identical
223 to within a scale/offset (most noticeable in the comparison window).
224 * Updated DENSS to the newest version. WARNING: Includes a non-backwards
225 compatible change to the DENSS function in the API.
226 * Improved display of DENSS results plots in dark mode.
227 * Fixed various issues with making the frozen builds using the newest
228 version of pyinstaller.
229
230
231 2.2.1
232 ----------
233
234 Release date: 2023-06-22
235
236 Overview
237 ^^^^^^^^^^
238
239 The RAW team is pleased to announce the release of RAW version 2.2.1. This
240 version contains a single bug fix:
241
242 * Fixed a bug that prevented some calibration and masking operations from being used.
243
244 Because this bug prevented the use of major features it warranted a quick fix.
245
246 All changes:
247 ^^^^^^^^^^^^^
248
249 * Fixed a bug that prevented some calibration and masking operations
250 from being used when running with newer versions of matplotlib (including
251 the prebuilt installers).
252
253
254 2.2.0
255 -----------
256
257 Release date: 2023-06-09
258
259 Overview
260 ^^^^^^^^^^^
261
262 The RAW team is pleased to announce the release of RAW version 2.2.0. Significant
263 changes include:
264
265 * Integration of CRYSOL into the GUI and API. You can now generate theoretical
266 profiles by simply plotting a .pdb or .cif file, or you can open the CRYSOL
267 analysis window and adjust the settings and fit the model to experimental
268 data.
269 * A new profile comparison window that provides residual and ratio plots,
270 as well as a heatmap of the probability profiles are the same based on
271 the selected similarity test.
272 * Faster calculation of SVD and forward and backward EFA plots
273 * Improved PDF report with text wrapping in columns so that tables can't
274 extend off the edge of the page and vector graphics plots.
275
276 The new release also includes numerous small bug fixes and improvements. Note
277 that this version of RAW introduces a new dependency on svglib.
278
279 In order to improve the prebuilt MacOS and Linux installers the oldest version
280 of OSes they will work in is now MacOS 11 (Intel) or 12 (Apple Silicon) and
281 Ubuntu 18.04 LTS (note that RAW can still be run from source on older versions).
282
283
284 All changes:
285 ^^^^^^^^^^^^^
286
287 * Fixed a bug where ATSAS fit files might load in missing the first or last datapoint.
288 * Improved robustness of loading text files.
289 * Improved speed of averaging, subtraction, merging, and interpolation up to 10x.
290 * SVD, EFA, and REGALS can now used binned profiles for calculating the SVD,
291 resulting in a significant speed up.
292 * EFA now has a toggle for using previous result, which is off by
293 default (changes default behavior).
294 * Buffer region in the LC Series Analysis panel is now selected/validated with
295 an intensity test on the median frame rather than the max frame.
296 * Fixed a bug where Custom mode didn't work for DENSS.
297 * Fixed a bug where min/max q for adjusted porod volume could end up outside
298 of the interpolation range when using automated q selection.
299 * The RAW main window now remembers position and size when you reopen it.
300 * Fixed a bug where the q range in the BIFT and GNOM windows wasn't restricted by the
301 q range set for the profile.
302 * Removed spurious angstrom labels from the Rg label in the BIFT and GNOM window.
303 * Fixed some issues that could arise when opening the GNOM window if a IFT
304 wasn't successfully calculated.
305 * Fixed a bug where BIFT wasn't using the q range previously used if the window
306 was reopened.
307 * Added ability to use non-integer Dmax values in the GNOM window.
308 * Added ability to set profile units as 1/A or 1/nm for unit-aware calculations in RAW.
309 * Made GNOM and MW panels unit-aware for automatically determining some values.
310 * Fixed issues relating to using wxpython 4.2.0
311 * Fixed issues relating to using matplotlib 3.7
312 * Fixed a bug where the REGALS P(r) function wouldn't have the correct color.
313 * Updated error messages to have system and version information.
314 * Added zero lines to some REGALS and EFA plots.
315 * Changed how plot margins are set to fix visual glitches.
316 * Fixed an issue where tables in the report could extend off the edge of the document.
317 * Added ability to add DENSS data to the report from the API.
318 * Fixed a bug where DENSS data wasn't properly parsed for the report.
319 * Fixed a bug where DAMMIF data wasn't properly parsed for the report.
320 * Fixed a bug where extra EFA or REGALS information could be saved in the report
321 if you saved more than one dataset where the technique was used.
322 * Figures in the report are now vector (svg), so they should be higher quality.
323 * Added a dependency on svglib.
324 * Added a new comparison window that has residuals, ratios and a heat map as
325 well as the old similarity test list.
326 * Fixed an issue where FoXS fit files could take a long time to load.
327 * Added a GUI for CRYSOL.
328 * PDB and CIF files can now be loaded into RAW and the theoretical profile from
329 CRYSOL is calculated when that happens.
330 * Made subtraction of profiles with mismatched q vectors more robust.
331 * Added ability to average profiles with mismatched q vectors.
332 * Added ability to export data from the main IFT plot.
333 * Fixed a bug where loading series data that doesn't have time data when the
334 series x axis is in time would cause an error.
335 * Fixed a bug where showing an image that was a different size than the beamstop
336 mask array would cause an error.
337 * DENSS resolution now rounds instead of displaying to arbitrary precision.
338 * Added ability to rebin profiles in the dimensionless Kratky plot directly
339 from the panel.
340 * Fixed a bug where GNOM could raise an error if it failed due to having a
341 fixed number of points in the P(r) function.
342 * Added a tutorial on customizing and saving plots, exporting plot data, and
343 opening data saved from RAW externally.
344 * Updated DENSS to the latest version.
345 * Added the ability to add DAMMIF and DENSS results from the saved results.csv
346 files to the pdf reports from the GUI.
347 * Fixed a bug where setting certain TeX values for plot labels could cause an
348 error.
349 * Fixed a bug where loading in a series when the intensity display was set
350 to q value or q range and profiles in the series didn't contain either
351 the q value or start/end of the q range could crash RAW.
352 * Fixed a bug where denss and dammif results plots could end up the wrong size.
353 * The Linux .deb installer now provides a version of RAW that works properly
354 on Ubuntu 22.04 LTS (previously no GUI widgets had borders and ATSAS didn't
355 work).
356 * MacOS .app is now codesigned and notarized, so it should work on any system
357 without requiring a workaround.
358 * Fixed a bug that would prevent installation of the API.
359
360
361 2.1.4
362 -----------
363
364 Release date: 2022-07-20
365
366 Overview
367 ^^^^^^^^^^^
368
369 The RAW team is pleased to announce the release of RAW version 2.1.4. Significant
370 changes include:
371
372 * Compatibility with ATSAS 3.1.0
373
374 Due to some changes in ATSAS, you may notice some differences in the associated
375 RAW tools:
376
377 * SUPCOMB has been replaced with CIFSUP.
378 * DAMCLUST is now included in DAMAVER, and so is no longer an option in the
379 DAMMIF/N GUI.
380 * SASRES is not included in DAMAVER 3.1.0 output, but is in 3.1.1.
381 * Output formats for DAMMIF/N are now .cif files.
382 * DAMAVER is now multi-core. This greatly improves the speed, but as of now
383 we don't see any way to restrict the number of cores it uses, so the number
384 of processors specification in the DAMMIF/N window only applies to the
385 reconstructions, not the averaging.
386 * Clustering results from DAMAVER no longer include average cluster deviation
387 or distance between clusters, so that is not reported. Eventually the GUI
388 may be updated to remove those values, but since we suspect many people will
389 keep using the older version of DAMCLUST for a while we will leave those
390 fields in the GUI for now.
391 * Note that the tutorials have been updated for ATSAS 3.1, but if you have
392 an older version of ATSAS installed you will see the options appropriate
393 for that version.
394
395 All changes:
396 ^^^^^^^^^^^^^
397
398 * Support for now .cif output format for DAMMIF/N.
399 * Support for CIFSUP for alignment, including standalone GUI.
400 * Auto detection of availability of CIFSUP/SUPCOMB.
401 * Support for the new DAMAVER.
402 * Extended support for SUPCOMB and DAMAVER to include all possible options.
403 * Removed standalone call to DAMCLUST when using ATSAS 3.1.0.
404 * DAMMIN refinement is now run in the same mode as the rest of the
405 reconstructions (Fast/Slow).
406 * Updated the sigma_clip integrator to use the pyFAI ng integrator
407 (requires pyFAI>=0.21)
408 * Added a feature to go to a particular image in a multi image file displayed
409 in the Image plot panel.
410 * Fixed a bug where certain values were set incorrectly when running DAMMIN in
411 expert mode.
412 * Added new ATSAS functions to the API, and updated API for changes to
413 existing ATSAS functions.
414 * Added ability to set DAMMIN random seed in the API.
415 * Fixed a bug in the API rebinning that could result in the wrong number of
416 points if multiple profiles were input at once.
417
418
419
420
421 2.1.3
422 -----------
423
424 Release date: 2022-06-06
425
426 Overview
427 ^^^^^^^^^^^
428
429 The RAW team is pleased to announce the release of RAW version 2.1.3. This
430 version contains a single bug fix:
431
432 * Fixed a bug that could prevent data from loading into RAW after the RAW
433 window was dragged between two monitors.
434
435 It's not clear how prevalent this bug was, but given the potential severity
436 it warranted a quick fix/release.
437
438 NOTE: As of now, RAW is not compatible with ATSAS 3.1.0, which is currently
439 available for download as a pre-release. This is because ATSAS 3.1.0 is currently
440 missing several important programs, such as some of the DAMAVER set of tools,
441 so we can't test against that. Once ATSAS 3.1.0 is officially released we will update
442 RAW to support it. The same may apply to the 3.2.0 pre-release, we haven't been
443 able to test that yet.
444
445 All changes:
446 ^^^^^^^^^^^^^
447
448 * Fixed a bug that could prevent data from loading into RAW after the RAW
449 window was dragged between two monitors.
450
451
452 2.1.2
453 -----------
454
455 Release date: 2022-05-23
456
457 Overview
458 ^^^^^^^^^^^
459
460 The RAW team is pleased to announce the release of RAW version 2.1.2. This
461 version contains mostly minor bug fixes. Significant changes include:
462
463 * Added a prebuilt version for arm64 chips on MacOS (Apple Silicon).
464 * Removed Windows 7 and 8 support form the prebuilt version for Windows.
465 * Added support for Eiger2 images from BioCAT.
466 * Improved handling of multi-image files.
467 * Adds a new dependency on mmcif_pdbx to read mmcif files.
468
469 There are also numerous other small bug fixes and new features.
470
471 NOTE: As of now, RAW is not compatible with ATSAS 3.1.0, which is currently
472 available for download as a pre-release. This is because ATSAS 3.1.0 is currently
473 missing several important programs, such as some of the DAMAVER set of tools,
474 so we can't test against that. Once ATSAS 3.1.0 is officially released we will update
475 RAW to support it.
476
477 All changes:
478 ^^^^^^^^^^^^^
479
480 * Fixed a bug that prevented normalization by a BioCAT header counter if
481 it was the last counter in a line.
482 * Improved buffer region finding in the series analysis.
483 * Fixed a bug where the GNOM window raised an error if Dmax wasn't found
484 automatically.
485 * Fixed a bug where a series buffer region wasn't found if there were no peaks
486 present in the data set.
487 * Fixed a bug where REGALS results would show two lines for the same concentration
488 curve when it wasn't supposed to.
489 * Fixed a bug where validation of the REGALS settings could cause an error.
490 * Fixed a bug where changing the range for REGALS in the SVD plot when there
491 were previous REGALS results could cause an error.
492 * Fixed a bug where using the qmin or qmax boxes in the series adjustment
493 panel could cause an error.
494 * Fixed a validation issue in REGALS.
495 * Added ability to read in Eiger2 images from BioCAT and associated headers.
496 * Added log binning for azimuthal integration.
497 * Fixed a bug in error propagation on binning.
498 * Fixed a bug where auto centering in the calibration panel didn't work on Eiger
499 images.
500 * Fixed a bug were SASRES resolution couldn't be read out of the damsel.log
501 file in newer versions of ATSAS (>=3.0.4).
502 * Improved azimuthal integration speed.
503 * Image display for Eiger2 and Pilatus images now ignores bad pixels and
504 detector gaps when automatically setting min and max values.
505 * Fixed a bug where series buffer and sample ranges wouldn't print in the report
506 if there wasn't also EFA or REGALS data.
507 * Fixed a bug where moving a polygon or square mask wouldn't regenerate the mask
508 in RAW unless you saved and reloaded the settings.
509 * Fixed a bug where if a profile had a non-zero starting q index, autorg
510 would return the wrong start index, which could cause it to fail in the GUI.
511 * Fixed some off by one errors in the start and end points for some of the
512 ATSAS functions in the API.
513 * Improved speed of GNOM calculation in the GNOM window.
514 * Fixed a bug with the initial start point not getting set correctly for some
515 IFTs in GNOM.
516 * Added an option (on by default) where masked pixels are excluded from
517 automatic scaling in the image viewer.
518 * Improved file handling for multi-image files to significantly reduce
519 memory usage.
520 * Removed GNOM options not available in gnom5.
521 * Fixed a bug where if alpha wasn't the default value the GNOM window didn't
522 initialize with the correct alpha.
523 * Fixed a bug where the show plot buttons (1&2, 1, or 2) weren't working
524 correctly with matplotlib >=3.4.
525 * Dropped support for Windows 7 and 8 in the prebuilt version.
526 * Added a prebuilt version for arm64 chips on MacOS (Apple Silicon chips).
527 * Updated DENSS to the current version.
528 * Made RAW mostly dark mode compatible on MacOS (requires wxpython>=4.1.1).
529 May not work in the pre-built version for Intel macs.
530 * Fixed a bug where DENSS symmetry settings other than 0 would cause an error
531 when the DENSS window was opened.
532 * Added some initial compatibility with ATSAS 3.1.0, but this is not finished
533 because the pre-release version of ATSAS doesn't have several of the necessary
534 programs for testing. Main change is mmcif compatibility for dammif outputs.
535 * Added a new dependency on mmcif_pdbx for reading mmcif files.
536 * Fixed an issue with spin controller display sizes in GTK3 (some linux installs).
537
538
539 2.1.1
540 -----------
541
542 Release date: 2021-05-05
543
544 Overview
545 ^^^^^^^^^^^
546
547 The RAW team is pleased to announce the release of RAW version 2.1.1. The
548 major change in this version is:
549
550 * Fixed a serious bug that would cause RAW to crash on Ubuntu.
551
552 There are also several other small bug fixes and new features.
553
554 All changes:
555 ^^^^^^^^^^^^^
556
557 * Fixed a serious bug that would cause RAW to crash on Ubuntu (and possibly other
558 OSes).
559 * Fixed a bug where closing the Guinier window before autorg finished would
560 result in an error.
561 * Fixed a bug that could cause an error if the auto_dmax function failed to
562 return a result.
563 * Fixed a bug where using simple concentration regularizers would fail.
564 * Fixed a bug where caching of certain compiled functions wasn't working,
565 leading to them having to be compiled every time RAW was opened.
566 * Tweaked when functions are compiled to try to speed up the user experience,
567 particularly when opening the Guinier window, and either IFT window.
568 * Improved the speed of BIFT on Linux and Windows.
569 * Fixed an issue where RAW wouldn't work with matplotlib>=3.4.1.
570 * Fixed an issue where available fonts weren't properly displayed in the
571 prebuilt versions.
572 * In the RAW API, BIFT now defaults to single processor (should be faster),
573 and you can specify the number of processors to use if you use it in
574 multiprocessor mode.
575
576
577
578 2.1.0
579 -----------
580
581 Release date: 2021-04-20
582
583 Overview
584 ^^^^^^^^^^^
585
586 The RAW team is pleased to announce the release of RAW version 2.1.0. This
587 version sees the release of two major new features:
588
589 * Analysis reports on your data can now be :ref:`saved as PDFs <s1p4>`.
590 * The release of a GUI for the REGALS technique, a new way to deconvolve
591 overlapping LC-SAXS peaks. REGALS can be thought of as an extension and
592 enhancement of EFA for other types of SAXS data, such as ion exchange
593 chromatography, titration series, and time resolved SAXS.
594 You can :ref:`read more about REGALS here <raw_regals>`.
595
596 Additionally we've overhauled the auto_guinier function to improve accuracy and
597 applicability to lower quality data. We've also added a new, more accurate
598 method for automatically finding Dmax when using GNOM. Finally, there are the usual
599 numerous small tweaks and bug fixes for the main RAW GUI and the API.
600
601 Special thanks to Steve Meisburger and Darren Xu for helping with the
602 details of their REGALS algorithm and code, and testing the new REGALS GUI.
603
604 **Note for MacOS users:** In order to achieve full compatibility with MacOS 11, we
605 have had to drop support in the prebuilt version for 10.9 and 10.10. The
606 prebuilt version of RAW will now run only on 10.11 or later. Additionally,
607 in 10.11-10.13 the main RAW windows will show some odd coloration (black
608 bars near the top of various windows, for example), but all functionality
609 seems to work fine. You can still build RAW from source on older versions of MacOS.
610
611 Also, we haven't been able to test on the Apple M1 chipset. RAW should work via the
612 built in Rosetta 2 translation in MacOS 11, but it will not run natively. If
613 someone wants to send us a Mac with an M1 chip to test on, we're happy to work on
614 getting it to run natively.
615
616 All changes:
617 ^^^^^^^^^^^^^
618
619 * Fixed a bug that was causing pyFAI to recreate the azimuthal integrator each
620 time, slowing down radial averaging.
621 * Fixed a BioCAT specific bug where concentration would end up in the profile
622 info when it wasn't actually known for that profile.
623 * Fixed a bug where series files couldn't be loaded or saved in python 3.8.
624 * Fixed a bug where if you declined to load a config when you started RAW,
625 the ATSAS install location wouldn't be automatically found.
626 * Fixed a bug where matplotlib 3.3 would mess up the plot toolbars.
627 * Fixed a bug where you would see an error message if RAW failed to find
628 a valid sample region in the LC series plot.
629 * Fixed a bug where doing EFA on a series that had the q range of the
630 subtracted profiles truncated relative to the unsubtracted profiles would
631 fail.
632 * Added the ability to generate PDF reports of analysis.
633 * Fixed a bug where the profile and ift line options dialogs couldn't be
634 opened with matplotlib 3.3.
635 * Significant improvements to auto_guinier function for both the GUI and API,
636 including better accuracy, better handling of low quality data, and better
637 handling of poorly formatted data.
638 * Fixed a bug where if previous EFA ranges were available they wouldn't be
639 properly set when the EFA window was opened.
640 * The RAW DENSS results .csv file now indicates if a refinement was run.
641 * Fixed a bug where RAW could fail to load a .out file.
642 * Fixed a bug where aborting in the middle of a DENSS average could
643 cause an error.
644 * Fixed a bug where opening the GNOM window if the profile had a non-integer
645 Dmax value caused an error.
646 * Added the REGALS technique.
647 * Added an enhanced way to automatically find Dmax when using GNOM.
648 * Fixed a bug where running GNOM when RAW was run with python 3.8 could fail.
649 * Added ability to read in a fourth dQ column in .dat files, preserve the dQ
650 values through analysis and saving. Note that merging and interpolating
651 do not preserve the dQ values at this time.
652 * Added ability to read in CRYSOL 3 .int files.
653 * Fixed an off by one bug that could affect SVD/EFA/REGALS
654 * Fixed a bug where settings could fail to save or load on Windows if they included
655 non-ascii characters
656 * Fixed a bug where calculating the corrected Porod volume MW could return an error
657 * EFA now remembers the force positive settings for concentration.
658 * Fixed a bug where if an EFA range was listed high to low it would cause an
659 error.
660 * Fixed a bug where scaling q by 10x or 0.1x only worked once (i.e. you could
661 scale to 0.1x or 10x, but not 100x, and couldn't go back to 1x after
662 applying a scale).
663 * Fixed a bug where the linear baseline wasn't getting a good start value.
664 * GNOM window now 'truncates for dammif/n', which truncates to the smaller
665 of 8/Rg or 0.3.
666 * Guinier window now opens faster.
667 * Updated DENSS to version 1.6.3, which includes the possibility of doing
668 DENSS on a GPU (requires RAW to be built from source).
669 * Fixed a bug where multiple DENSS windows couldn't be used at the same time.
670 * Fixed a bug where subtracted and baseline corrected profiles from the LC
671 Series Analysis window would have the prefix of the individual profiles in
672 the series, rather than the series itself.
673 * Fixed some possible memory leaks related to dialog creation/destruction.
674 * Added a number of new tests.
675 * Added compatibility with new string handing in h5py version 3.
676 * Full compatibility with MacOS 11, which fixes several graphics glitches
677 in 10.15 and 11. This required dropping support in the prebuilt version
678 for MacOS 10.10 and earlier.
679 * Fixed a bug with the API where loading multiple images from a single file
680 wasn't working properly.
681 * Added the ability to abort DAMMIF/N and related functions and DENSS runs
682 in the API.
683 * Made SECM and RAWSettings objects picklable, so they can be passed
684 through a multiprocessing queue.
685 * Fixed an API bug where saving a series would fail if you didn't set a
686 filename.
687 * Fixed an API bug where saving the GNOM results to a profile was saving
688 the wrong qmax value.
689 * Fixed a bug in the API where Dmin and Dmax zero conditions weren't getting
690 set correctly for GNOM.
691 * Added a feature to the API to truncate an IFT for dammif using either 8/rg
692 or 0.3, whichever is smaller.
693 * Fixed a bug in the API that could cause GNOM to fail to run.
694 * The DENSS function in the API now returns chi squared, rg, and support
695 volume as a function of iteration so you can check convergence.
696 * Fixed a bug in the API where running EFA would change the associated ranges.
697 * Fixed a bug in the API that could cause BIFT to fail.
698 * Fixed a bug in the API that could cause the auto_guinier function to fail.
699 * Fixed a bug in the mw_vp API function.
700
701
702 2.0.3
703 -----------
704
705 Release date: 2020-08-11
706
707 Overview
708 ^^^^^^^^^^^
709
710 The RAW team is pleased to announce the release of RAW version 2.0.3. While
711 this is only a point release, we are releasing a major new feature for RAW.
712 There are only minor modifications to the RAW GUI, but we are releasing an
713 entirely new RAW API. This means that RAW can now be imported as a python
714 package and you can call RAW functions in your own scripts. The API is fully
715 documented, and the :ref:`documentation plus install instructions and some
716 examples are available on the RAW website. <api>`
717
718 A short example of the usage would be:
719
720 .. code-block:: python
721
722 import bioxtasraw.RAWAPI as raw
723
724 #Load the settings
725 settings = raw.load_settings('./standards_data/SAXS.cfg')
726
727 #Load the profile of interest
728 profile_names = ['./reconstruction_data/glucose_isomerase.dat']
729 profiles = raw.load_profiles(profile_names)
730
731 gi_prof = profiles[0]
732
733 #Automatically calculate the Guinier range and fit
734 (rg, i0, rg_err, i0_err, qmin, qmax, qrg_min, qrg_max, idx_min, idx_max,
735 r_sq) = raw.auto_guinier(gi_prof, settings=settings)
736
737 The API should be considered in beta right now. It is tested, but based on
738 further testing and user feedback the API may still change significantly.
739 If you use the API, please let us know if you encounter any bugs, incomplete
740 (or inaccurate) documentation or examples, or have suggestions for changes or
741 additions.
742
743 There are also several small bug fixes for the main RAW GUI.
744
745 All changes:
746 ^^^^^^^^^^^^^
747
748 * First release of the RAW API
749 * Added new unit tests for the API.
750 * Improved backwards compatibility of the RAW series .hdf5 files.
751 * Fixed some depreciation warnings.
752 * Fixed a bug where returning to the first EFA panel from the last and
753 changing the number of significant singular values, then returning to the
754 third panel would result in an error.
755 * Fixed several bugs that could cause multiprocessing calculations to lock
756 up.
757 * Fixed several bugs in BIFT to make it more robust for poorly formatted
758 data.
759 * Fixed a Guinier fit bug where the fit could fail if a point in the fit
760 had an uncertainty value of 0.
761 * Fixed a bug where DATCLASS M.W. calculation could fail with an error.
762 * Fixed a bug where if the estimation of the Rg error failed the Rg results
763 would fail to save with the profile when the Guinier window was closed.
764 * Fixed a bug where axes for the IFT profile plot couldn't be changed.
765 * The P(r) fit is now plotted on top of the IFT data.
766 * Fixed a bug where workspaces with IFTs couldn't be loaded.
767 * Modified the BioCAT header load function to parse a single field spread
768 out over multiple lines in the header.
769
770
771 2.0.2
772 -----------
773
774 Release date: 2020-07-09
775
776 Overview
777 ^^^^^^^^^^^
778
779 The RAW team is pleased to announce the release of RAW version 2.0.2. The
780 major change in this version is:
781
782 * Fixed a bug where SAXSLAB images couldn't be loaded.
783
784 There are also several other small bug fixes and new features.
785
786 All changes:
787 ^^^^^^^^^^^^^
788
789 * Can now load .dat files from WAXSiS, .dat files that are comma separated.
790 * Fixed a bug where the Vc integrated intensity plot was blank if the
791 scattering profile had saved M.W. results.
792 * Improved rebinning functions, particularly the log binning function.
793 * Fixed a bug where error wasn't interpolated properly when interpolating
794 a profile.
795 * Fixed a bug where pixel size from header bindings was in the wrong units.
796 * Fixed a bug where series type could get lost in certain operations.
797 * Fixed a bug where centering and enantiomorph selection options were
798 ignored in the DENSS alignment panel.
799 * Fixed a bug where series buffer range finding was scaling profiles before
800 testing for similarity.
801 * Fixed a bug where SAXSLAB images failed to load with pillow version 7.
802 * Fixed a bug where SAXSLAB images failed to load.
803 * Fixed a bug where images wouldn't load if there was no beamstop mask.
804 * Fixed a bug that could result in calculated data not displaying on the
805 series plot.
806 * Fixed a bug where series saved as .hdf5 with EFA analysis would fail to
807 open the EFA window when reloaded.
808 * Fixed a bug where datgnom couldn't be run on truncated profiles.
809 * Fixed a bug where opening the advanced settings window from the GNOM
810 window didn't properly update changed settings in the GNOM window.
811 * Fixed a bug where .hdf5 files couldn't be plotted by dragging and dropping
812 or using the 'Plot Series' button.
813 * Fixed a bug where running a dammin refine with too long a filename would
814 fail (previously thought to be fixed in 2.0.0).
815 * Fixed a bug that could prevent DENSS from starting on Windows and Linux.
816 * Fixed a bug that could prevent auto determination of number of components
817 in EFA.
818
819
820 2.0.1
821 ------------
822
823 Release date: 2020-06-01
824
825 Overview
826 ^^^^^^^^^^^^
827
828 The RAW team is pleased to announce the release of RAW version 2.0.1. This
829 version fixes several serious bugs in the previous version, including:
830
831 * A bug where some of the M.W. calculations failed for profiles with
832 a maximum q value greater than 0.5.
833 * A bug where the standalone DENSS alignment window failed to run
834 on Windows and Linux.
835 * A bug where killing the prebuilt version of RAW on Linux would fail to
836 delete temporary files, which could lead to the /tmp partition filling up.
837
838 There are also several other small bug fixes and new features.
839
840
841 All changes:
842 ^^^^^^^^^^^^^^
843
844 * Fixed a bug where the 'More Info' button didn't work for DATCLASS M.W.
845 * Fixed a bug where Bayes and DATCLASS M.W. weren't saved when saving all
846 analysis info.
847 * Fixed a bug where RAW woud fail to load in .out files if they were missing
848 values for any of the perceptual criteria.
849 * Fixed a bug where an error message was shown whenever a profile with qmax
850 > 0.5 was opened in the M.W. window.
851 * Fixed a bug where the Vp M.W. extrapolation range warning could be shown even
852 if the qmax selected was inside the extrapolation range.
853 * Added zero lines to DAMMIF, DENSS residual plots.
854 * Fixed a bug where running DENSS without averaging could result in an error
855 message.
856 * Fixed a bug where running DENSS without averaging or alignment would result
857 in an error message.
858 * Fixed a bug where when there was more than one profile in the normalized
859 Kratky plot the dashed lines to guide the eye were not removed when
860 switching from dimensionless Rg to other plots, which would throw off the
861 scale of the plot.
862 * Fixed a bug on Windows where the standalone DENSS alignment window didn't
863 work.
864 * Fixed bugs where the advanced options couldn't be shown in the SUPCOMB or
865 DENSS alignement standalone windows on Windows.
866 * RAW now catches SIGINT and SIGTERM and tries to exit gracefully. This mostly
867 fixes an issue with the prebuilt .deb installer where the temp files
868 created when starting RAW don't get deleted.
869
870 2.0.0
871 --------
872
873 Release date: 2020-05-07
874
875 Overview
876 ^^^^^^^^^^^^
877
878 The RAW team is pleased to announce the release of RAW version 2.0.0. This version
879 brings a number of exciting changes, including:
880
881 * Python 3 compatibility!
882 * Conversion to pyFAI for radial integration
883 * A .deb prebuilt installer for Debian/Ubuntu
884 * A new series save format, .hdf5, that can be easily read by other programs.
885 This new format is also ~50-70% smaller than the previous format.
886 * New information windows above the control panel to display all your analysis
887 * Ability to align DENSS and DAMMIF/N outputs to PDB files
888 * Works with ATSAS 3 on all platforms
889 * New Series adjustment panel that lets you adjust the scale, offset, and q range
890 for all profiles in a series easily.
891
892 There are also a number of smaller new features, and a ton of bug fixes and tweaks.
893
894 With this release, we recommend that all users running RAW from source start
895 using Python 3 instead of Python 2.
896
897 Important notes:
898
899 * RAW configuration files from 2.0.0 will not necessarily be back compatible with
900 previous versions of RAW. You will get a warning if you load a .cfg file from
901 RAW 2.0.0 in a previous version. Old configuration files can be loaded in
902 RAW 2.0.0.
903
904 * RAW series .hdf5 files from 2.0.0 cannot be opened by previous versions of RAW.
905 The old series .sec files can be opened by 2.0.0.
906
907 * This is the last release that is guaranteed to be Python 2 compatible, since
908 Python 2 hit end of life in January 2020. While we will not intentionally
909 break compatibility with Python 2, we don't have the resources to test on both
910 Python 2 and 3.
911
912
913 Many thanks to the beta testers who helped test this release:
914
915 * Norm Cyr
916 * Richard Gillilan
917 * Rob Miller
918
919
920 All changes:
921 ^^^^^^^^^^^^^^^
922
923 * All RAW code is now compatible with both Python 2 and 3
924 * Conversion to pyFAI for radial integration, including support for using
925 detector angles, polarization correction, dark correction, flatfield
926 correction, and dezingering.
927 * A new .deb prebuilt installer for Debian/Ubuntu
928 * A new series save format, .hdf5, which is easily read by any program that
929 can load HDF5 data.
930 * Modified Control panel button layouts.
931 * Added a requirements.txt file for easy pip installation.
932 * Added ability to align DENSS results to a PDB or MRC file either from the
933 main DENSS window or an auxiliary window.
934 * Updated DENSS to version 1.5.0.
935 * Added ability to view help documents in program on MacOS and Windows.
936 * Changed a number of default windows sizes and tweaked layouts to be better on
937 all operating systems.
938 * Added all new info panels for Profiles, IFTs, and Series that display all
939 relevant analysis information about a selected item.
940 * Added ability for users to permanently add new hdf5 file definitions to RAW
941 from inside the program.
942 * Added a q cutoff to the volume of correlation calculation.
943 * Fixed a bug where the q cutoff for the porod volume MW calculation wasn't being
944 used for Series files.
945 * Fixed a bug where the q cutoff for the porod volume MW calculation wasn't getting
946 set properly in default mode when the MW window opened.
947 * Changed how imports are done on startup so that RAW can be run from the command line
948 in two number of ways, including ``python <path-to>RAW.py``, and as a module as
949 ``python -m bioxtasraw.RAW``
950 * Added ability to use SUPCOMB to align dammif/n output with a PDB file,
951 either directly from the main dammif/n window from from a separate window.
952 * Fixed a bug where not all of the program output would get written to the log
953 window for damaver, damclust.
954 * Added error handling for the main thread, which will reduce amount that RAW
955 freezes from unexpected errors.
956 * Changes to prevent/reduce flickering on Windows.
957 * You no longer see two overwrite prompts when saving multiple items at once.
958 * Fixed a couple of options in the view menu that didn't work.
959 * Added a feature where if a user tries to load more than 100 profiles individually
960 they are asked if they instead want to load them as a series.
961 * EFA ranges can now span the whole dataset, allowing better fits for components
962 that are still eluting at the end of the EFA range.
963 * Added ability to easily apply the 8/Rg cutoff for dammif in the GNOM panel.
964 * Fixed a bug where RAW was not checking for unsaved IFTs on exit.
965 * Fixed a bug where IFTs would show as having unsaved changes when there were
966 no unsaved changes.
967 * Changed Manipulation and Main Plot names to Profiles.
968 * Added ability for RAW to prevent the computer from going to sleep during long
969 calculations, such as DENSS or DAMMIF/N.
970 * Fixed a bug where view menu items were not getting properly selected on startup.
971 * Added IFT plot axes to the view menu.
972 * Added LC Series Analysis to the Tools menu.
973 * Fixed a bug where an error message was displayed when quitting RAW.
974 * Fixed a bug where running DENSS on a BIFT P(r) function wasn't using the
975 correct q & i vectors for the refinement.
976 * Changed item highlight color.
977 * Made masking, centering, and all options panels scrolling panels.
978 * Added busy dialogs for saving files.
979 * Fixed a bug where failing to save a file could crash RAW.
980 * Added a zero line to the normalized Kratky plot.
981 * Fixed a bug that could cause dammif/n, damaver, and damclust to stop running on Windows.
982 * Fixed a bug where new versions of ATSAS (>=3.0) wouldn't be found on Windows.
983 * Fixed a bug where if filenames got too long and were truncated for dammif
984 the refine step failed.
985 * Fixed a bug where making lots of masks could result in an 'out of window ids'
986 error.
987 * Fixed a bug where masks didn't stay inverted upon resizing.
988 * Fixed a bug where changing the qmin or qmax while BIFT was running an initial
989 search gave an error.
990 * BIFT now saves the set q range and reopens the window with that range.
991 * BIFT and GNOM windows now default to the min q of the Guinier range if no
992 analysis has previously been done.
993 * GNOM analysis now saves alpha value, restores it when window is reopened.
994 * MW analysis now saves Porod cutoff choice, density, and VC mol type choice
995 and restores when the window is reopened.
996 * Fixed a bug where if you ran dammif or denss again in the same window the
997 results summary wouldn't display properly.
998 * Fixed several bugs related to running ATSAS by properly setting the environment
999 ATSAS and PATH variables.
1000 * Fixed a bug where the wrong version of ATSAS could be fond on MacOS.
1001 * Added ability to display P(r) functions on an I(0) normalized plot (set as default).
1002 * Fixed a bug where custom toolbar buttons didn't display as toggled properly on MacOS.
1003 * Added ATSAS MW methods Bayes and DATCLASS (Shape&Size) to the MW panel.
1004 * Fixed a bug where running datgnom didn't respect the q ranges set in the GNOM window.
1005 * Changes for compatibility with wxpython 4.1.0.
1006 * Fixed a bug where moving a profile between plots didn't preserve all of the
1007 line/marker style settings.
1008 * Fixed several bugs related to displaying and moving a legend on the plots.
1009 * New Series adjustment panel that lets you adjust the scale, offset, and q range
1010 for all profiles in a series easily.
1011 * Fixed a bug where the end point for profiles used in GNOM and BIFT was one
1012 data point earlier than specified in the controls.
1013
1014
1015 1.6.4
1016 --------
1017
1018 Release date: 2020-03-10
1019
1020 Overview
1021 ^^^^^^^^^^^^
1022
1023 The RAW team is pleased to announce the release of RAW version 1.6.4. This version
1024 adds in a new header type for the MacCHESS SAXS beamline Eiger 4M detector. There
1025 are also a few other minor bug fixes.
1026
1027 All changes:
1028 ^^^^^^^^^^^^^^^
1029
1030 * Fixed a bug where negative values for error would cause points to not be read
1031 from .dat files.
1032 * Fixed a bug where the BIFT window wouldn't open if the profile and n min or
1033 n max for the q vector set to other than 0 and the length of the q vector.
1034 * Fixed a bug where looking for bind list keywords that don't exist in the
1035 RAW settings would prevent a file from loading.
1036 * Fixed a bug where damaver didn't run with symmetry even if dammif did.
1037 * Added a name to the dock/menu bar icon.
1038 * Fixed a bug with moving masks.
1039 * Added CHESS EIGER 4M to counter file reader options.
1040 * Fixed type-casting issues for max/min in polygonmasking that caused
1041 errors on some older systems.
1042
1043
1044 1.6.3
1045 --------
1046
1047 Release date: 2019-11-01
1048
1049 Overview
1050 ^^^^^^^^^^^^
1051
1052 The RAW team is pleased to announce the release of RAW version 1.6.3. This version
1053 fixes a critical bug where when average detected different files, regardless of
1054 user choice it would always average all files (selecting just similar files
1055 didn't work). There are also a few other minor bug fixes.
1056
1057 All changes:
1058 ^^^^^^^^^^^^^^^^^^
1059
1060 * Fixed a bug where if you averaged, subtracted, or merged two items with analysis
1061 done on them, you could end up with partial analysis info in the resulting file
1062 that would cause errors opening analysis windows.
1063 * Fixed a critical bug where when average detected different files, regardless of
1064 user choice it would always average all files (selecting just similar files
1065 didn't work).
1066 * Fixed a bug where the MW window wouldn't open if the Guinier fit hadn't been done.
1067 * Fixed a (Debian specific?) bug where wx.CallAfter used with wx.MessageBox wasn't
1068 threadsafe and could cause RAW to crash (use wx.MessageDialog).
1069
1070
1071 1.6.2
1072 --------
1073
1074 Release date: 2019-10-28
1075
1076 Overview
1077 ^^^^^^^^^^^^
1078
1079 The RAW team is pleased to announce the release of RAW version 1.6.2. This version
1080 fixes several critical bugs that could prevent DENSS from running. There are no
1081 other changes.
1082
1083
1084 1.6.1
1085 --------
1086
1087 Release date: 2019-10-21
1088
1089 Overview
1090 ^^^^^^^^^^^^
1091
1092 The RAW team is pleased to announce the release of RAW version 1.6.1. This version
1093 contains numerous small bug fixes and improvements, particularly for the new
1094 series analysis methods released in version 1.6.0.
1095
1096 We anticipate this will be the last release before RAW version 2.0, which will be our
1097 first python 3 compatible release. We're aiming to release version 2.0 sometime around
1098 the end of the year.
1099
1100 Note: as part of this release we did test with ATSAS 3.0 (pre-release version), and
1101 RAW seems to be compatible with it.
1102
1103 All changes:
1104 ^^^^^^^^^^^^^^^^
1105
1106 * Fixed a bug where opening the Ambimeter panel could fail if ATSAS was installed
1107 in a directory with a space in the path name.
1108 * Fixed a bug where if RAW didn't load a settings file when opened it wouldn't
1109 automatically find the ATSAS directory on startup.
1110 * Fixed a possible bug where using the LC Series Analysis panel on series data
1111 being loaded in online mode could fail.
1112 * Added intensity type selector for the series panel when sending data to the main plot.
1113 * Fixed a bug where automatic integral baseline start/end region determination
1114 could set the wrong control limits.
1115 * Fixed a bug where zero lines on various plots (like the GNOM P(r)) plot weren't
1116 getting redrawn when necessary.
1117 * Fixed a bug with autoscaling in the LC Series Analysis plots when changing the
1118 data type displayed.
1119 * Fixed a bug where sample and buffer region comparison in the LC Series Analysis
1120 panel could return the wrong indices for dissimilar profiles.
1121 * Fixed a bug where profile comparison in LC Series Analysis would skip the first profile.
1122 * Fixed a bug where a very short series (<22 frames) could cause errors when opening
1123 the LC Series Analysis panel.
1124 * Improved automatic buffer search in the absence of major peaks.
1125 * Improved automatic buffer search to search on the right side of the main peak if
1126 it doesn't find a good buffer region on the left side.
1127 * Removed a bias to the left side of the peak in the automated sample region search.
1128 * Removed actual baseline correction values from being saved in file history, as history
1129 could get very long (>100000 lines).
1130 * Added a cutoff for header length, at which point RAW will stop saving file history.
1131 This avoids saving extremely large text files.
1132 * Added compatibility for pyFAI 0.18 (note: on linux and python 2 pyFAI 0.18 seems
1133 to be broken, stick with 0.17).
1134 * Added a new way of loading HDF5 files with definitions done in external files.
1135 * Added ability to load HDF5 files from LiX.
1136 * Fixed a bug where identical selected regions in the LC Series Analysis window didn't
1137 count as overlapping.
1138 * Fixed a couple of typos in messages.
1139 * Fixed a bug where Ambimeter and GNOM couldn't run if the current working
1140 directory was read only.
1141 * Improved how ATSAS programs are called, and added use of temporary file names
1142 and directories.
1143 * Fixed a bug where when dragging the image plot with the masking showing you
1144 could sometimes get an unexpected error.
1145 * Added the name of the series to the LC Series Analysis panel.
1146 * Fixed a bug where baseline subtracted profiles were improperly being skipped
1147 when calculating Rg etc in the LC Series Analysis panel.
1148 * Fixed a bug where if a series was loaded with a baseline already calculated,
1149 changing buffer range or other parameters wouldn't properly recalculate baseline
1150 corrected values.
1151 * Fixed a bug where if you set a baseline, then set it back to none, when exiting
1152 the LC Series Analysis window the baseline calculated values would be saved
1153 instead of the regular subtracted values.
1154 * Fixed a bug where if you loaded in a series curve with baseline correction,
1155 then turned off baseline correction, it wouldn't have any calculated values.
1156 * Fixed a bug where the LC Series Analysis panel would resize itself when any of
1157 the collapsible panes were collapsed or expanded.
1158 * Fixed a bug in the LC Series Analysis panel where if you had a range that was
1159 one frame long, when you closed and reopened the analysis window you
1160 couldn't adjust the range.
1161 * Fixed a bug in the LC Series Analysis panel where if you had a one frame long range
1162 you could get a reported correlation in the range.
1163 * Fixed some issues with window height where windows weren't opening large enough
1164 for all of their contents.
1165 * Fixed some issues with window size where windows could open up bigger than
1166 the screen.
1167 * Fixed a bug where in certain circumstances opening the SVD and EFA windows could fail.
1168 * Added compatibility with numba >= 0.44
1169
1170
1171 1.6.0
1172 ------
1173
1174 Release date: 2019-06-07
1175
1176 Overview
1177 ^^^^^^^^^^^^
1178
1179 The RAW team is pleased to announce the release of RAW version 1.6.0. This version
1180 contains several major changes:
1181
1182 * Completely new and improved SEC-SAXS processing, including new automated buffer
1183 and sample region selection and baseline correction. There are also
1184 significant speed improvements for SEC-SAXS processing, in addition to the
1185 new features.
1186 * Completely redone BIFT, which fixes several bugs (both minor and major), and
1187 adds Monte Carlo error estimation and extrapolation fit of data to I(0).
1188 * RAW now preserves matching metadata across processes like averaging and
1189 subtraction. Metadata is now saved with keywords compatible with the SASBDB
1190 to make uploading there easier for users. Users can now also provide
1191 arbitrary metadata during data reduction.
1192 * All new icons which are compatible with retina displays, including changing
1193 out the check mark for showing/hiding data on plots for an eye, which we
1194 hope will be more intuitive.
1195 * RAW now loads the last used config, rather than the last saved config, when
1196 it starts up.
1197 * Any analysis window (Guinier, MW, GNOM, etc) can now be opened more than
1198 once, allowing easy comparison or side-by-side processing of data sets.
1199
1200 You can see the full set of changes below.
1201
1202 We also want to note that we're not anticipating any other major
1203 feature releases this year. With the upcoming end of life for python 2 at the
1204 end of 2019, we need to focus on making RAW work with python 3. Once that is
1205 done we will start doing major feature development again.
1206
1207 All changes:
1208 ^^^^^^^^^^^^^^
1209
1210 * Updated DENSS to have the latest features, including refining averaged
1211 structures, symmetry constraints, and the 'Membrane' protein mode.
1212 * Completely redid BIFT code from the ground up. This fixes several bugs, and
1213 now includes Monte Carlo estimation of errors.
1214 * Completely redid series analysis for SEC-SAXS data. Now includes automated
1215 buffer and sample region determination and baseline correction.
1216 * Added residual plots to GNOM, BIFT, and DAMMIF/N results.
1217 * Fixed several bugs related to setting error bar line styles.
1218 * Added ability to add arbitrary metadata to a file header when an image is
1219 processed by RAW
1220 * Updated the adjusted Porod volume MW method to match the newly published MoW2
1221 approach.
1222 * Fixed a bug where info panel data could get improperly set
1223 * All appropriate fields in MW panel now editable.
1224 * You can now open any analysis window more than once (previously only one
1225 instance of each window was allowed).
1226 * Fixed a bug where in the GNOM window changing q_min or q_max didn’t update
1227 the IFT results.
1228 * RAW now loads the last used config (saved or loaded) by default rather than
1229 the last saved.
1230 * RAW now preserves all shared header values when averaging, subtracting, or
1231 merging datasets.
1232 * Added visual guidelines to the dimensionless Kratky plot.
1233 * Added option to display normalized residuals, now on by default.
1234 * Added Rigaku HiPix to known images (requires Fabio 0.9.0)
1235 * Guinier panel can now export Guinier fit data so users can make the Guinier
1236 plots in their plotting software of choice.
1237 * RAW’s file list no longer displays hidden files.
1238 * Can now read in time of each data point for BioCAT data.
1239 * Fixed a bug where closing the BIFT window with BIFT running would crash RAW.
1240 * Better formatting for numbers displayed in the status bar.
1241 * Fixed a bug where windows could be too large on low resolution displays.
1242 * Fixed a bug where series plot calculated data were not highlighted by the
1243 locater button.
1244 * Fixed a bug where markers were not highlighted by the locater button for
1245 any plot.
1246 * Fixed a bug where when selecting a line by clicking on it the plot markers
1247 were not highlighted.
1248 * Fixed a bug where selecting a line on the IFT plot didn’t work.
1249 * Can now display unsubtracted, subtracted, or baseline corrected intensity
1250 in the main series plot.
1251 * Fixed a bug where series data could be truncated when exporting.
1252 * Fixed a bug where the SVD window wasn’t doing the SVD on non-error-normalized
1253 curves.
1254 * Moved cormap to cython for speed, increased by at least 5x.
1255 * Modified layout of the repository to standardize.
1256 * Autorg now uses numba for just-in-time compiling. Speed increase of 2 orders
1257 of magnitude.
1258 * Fixed bugs that would occur when quick reduce, plot, plot series, or show
1259 images were used on folders, ‘..’, or with no files selected.
1260 * Added ability to plot intensity over a q range for series plots.
1261 * All-new icons that work with retina displays, including a new ‘eye’ for
1262 show/hide instead of a check box (hopefully more intuitive).
1263 * Fixed a few bugs in the DAMMIF/N GUI.
1264
1265
1266 1.5.2
1267 ------
1268
1269 Release date: 2019-04-04
1270
1271 Overview
1272 ^^^^^^^^^^^^
1273
1274 The RAW team is pleased to announce the release of RAW version 1.5.2. The only
1275 change is this version is a modification to how BioCAT header files are read in,
1276 to accommodate a new header file format at that beamline.
1277
1278 1.5.1
1279 ------
1280
1281 Release date: 2018-11-01
1282
1283 Overview
1284 ^^^^^^^^^^^^
1285
1286 The RAW team is pleased to announce the release of RAW version 1.5.1. This version
1287 contains several small bug fixes. Normally we might wait to release these until
1288 more major changes had happened, but there is a workshop using RAW soon and
1289 we wanted these bugs fixed before then. Significant issues that have been eliminated:
1290
1291 * An issue where the electron density output from DENSS could fail to load into pymol
1292 correctly because the default scaling was too small (still loaded into Chimera fine).
1293 Strictly speaking I think this is a workaround for a bug in pymol . . .
1294 * Several bugs with running GNOM, including using data with minimal sampling (<100 points).
1295 * Fixed a bug where the .app package for Mac wasn't displaying natively on retina displays,
1296 so the text was fuzzy.
1297
1298 You can see the full set of changes below.
1299
1300 All changes:
1301 ^^^^^^^^^^^^^^
1302
1303 * Fixed a bug where automatic loading of BioCAT SEC data wouldn't work if there was
1304 more than one underscore in the filename.
1305 * Fixed a bug where automatic loading of BioCAT SEC data wouldn't work if there existed
1306 another file with the same name but different extension as one of the image files.
1307 * Added parsing of damsup.log file for bead models, which allows highlighting of
1308 the representative model in the dammif summary.
1309 * Dammif results summary now saved by default.
1310 * DENSS results summary now saved by default.
1311 * Fixed several bugs in the GNOM interface that could cause it to fail.
1312 * Fixed a bug that prevented some .fit files from being loaded.
1313 * Fixed a bug where the Rg for BIFT was being calculated incorrectly.
1314 * Fixed a bug where temporary files (with a .tmp prefix) would mess up SEC autoupdates.
1315 * Fixed an issue where you couldn't run DENSS twice without closing the panel
1316 between each run.
1317 * Fixed an issue where the default scaling for DENSS was too small, and caused issues loading
1318 the electron densities into pymol.
1319 * Fixed a bug text in some items and list controls would display 'fuzzy' on high dpi
1320 monitors. This is still an issue for the plot labels.
1321 * Added the ability to run damaver and damclust on the same set of reconstructions.
1322 * Fixed a bug where the .app package for Mac wasn't displaying natively on retina displays,
1323 so the text was fuzzy. Note that in order to fix this, even after you install the new
1324 version you may have to do the following:
1325
1326 #. Enter the following commands in your terminal: ::
1327
1328 /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -f /Applications/RAW.app
1329 /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -kill -seed
1330 /System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -f /Applications -all local,user
1331
1332 #. You may then have to right click on RAW.app, select 'Get Info' and uncheck the box
1333 'Open in low resolution mode'
1334
1335
1336 1.5.0
1337 ------
1338
1339 Release date: 2018-08-23
1340
1341 Overview
1342 ^^^^^^^^^^^^
1343
1344 The RAW team is pleased to announce the release of RAW version 1.5.0. This version focused on
1345 several significant updates that will be invisible to most users. Namely:
1346
1347 * RAW is now compatible with wxpython4
1348 * RAW no longer uses weave, which has been essentially unsupported for years, to
1349 compile code. It now uses the numba just-in-time compiler.
1350
1351 This will make it much easier for us to support RAW, and should make it easier for
1352 users to install RAW from source on any platform. It also prepares us for the
1353 inevitable transition to Python 3 that has to happen in the next several years.
1354
1355 In addition to a range of bug fixes and small enhancements detailed below, RAW
1356 also now incorporates the new DENSS alignment code. This is all done in python,
1357 in RAW. This removes the dependency on EMAN2, and means that all parts of density
1358 reconstructions work on Windows!
1359
1360 Finally, RAW is now saving configuration files in JSON format. This is human
1361 readable, and makes the RAW configuration files more open and accessible for other
1362 programs to use. However, this does mean that earlier versions of RAW will not be
1363 able to open configuration files created with version 1.5.0 or later. However,
1364 configuration files created in earlier versions of RAW ARE compatible with version 1.5.0.
1365
1366
1367 All changes:
1368 ^^^^^^^^^^^^
1369
1370 * Fixed a bug where if atsas is in the path but not installed RAW will still find the directory from the path.
1371 * ATSAS filepaths and filenames should be able to deal with spaces.
1372 * Fixed various strange threadsafe bugs on debian 8.
1373 * Weighted average now checks for similarity
1374 * Fixed a bug where the dammif results window wouldn't work when you did only one dammif run and had damaver checked.
1375 * Fixed a bug where dammin in normal mode wouldn't work on windows.
1376 * Fixed a bug where dammif/n wouldn't abort on windows.
1377 * Added in new expected shape parameter for dammif in custom mode.
1378 * Fabio, hdf5plugin, and pyfai are now required dependencies, rather than optional dependencies
1379 * Mode all previously compiled code into using the numba just-in-time compiler.
1380 This is important because the previous code was compiled with weave, which
1381 has been unsupported for years.
1382 * Fixed a bug where users could give dammif/n file prefixes that were too long for damaver.
1383 * Fixed a bug where canceling out of the color change dialog didn't cancel the color change.
1384 * Made the plot options box resizable (important for computers with large font size).
1385 * Fixed a bug where the sec plot right axis framestyle wouldn't properly restore
1386 if you canceled out of the plot options dialog.
1387 * Significant code restructuring and cleanup.
1388 * EFA calculations are now in a thread, so it might not freeze the whole GUI.
1389 * Circle and rectangle masks are now resizable.
1390 * Added ability to automatically mask pixels at/above/below a given threshold.
1391 * Added ability to automatically mask images based on known detector panel gaps.
1392 * Added ability to create predefined size/location circle and rectangle masks.
1393 * Added ability to control detector image left-right flip and up-down flip.
1394 * Fixed a bug where RAW could crash under certain conditions when exporting analysis info.
1395 * Fixed a bug where the Guinier window would give an error under certain circumstances.
1396 * GNOM and BIFT windows now show scattering profiles on log-lin axes.
1397 * RAW is now wxpython4 compatible.
1398 * Added alpha as an available setting in the GNOM window.
1399 * Fixed several bugs in the GNOM window that caused RAW to unnecessarily calculate
1400 the P(r) function, slowing down the program.
1401 * Added drag and drop file loading for both the plot and control panels.
1402 * Settings are now saved in JSON format, which is human readable, to increase
1403 compatibility and ease of use by other programs. This means that settings
1404 saved from RAW 1.5.0 are not compatible with previous versions of RAW. Settings
1405 saved from previous version of RAW ARE compatible with RAW 1.5.0.
1406 * DENSS now uses custom python code for aligning and averaging density. This
1407 removes the requirement on EMAN2, which means all parts of DENNS will work on Windows.
1408 * The image plot now maintains the same zoom when you change images. Previously
1409 it would zoom back out to the full image whenever you showed a new image.
1410 * Fixed a bug where the SVD would sometimes not open correctly.
1411 * Fixed a bug where if there was one pixel in the q bin during integration the
1412 error would be set to 0 instead of the square root of the value
1413 * Fixed a bug where nans or infinities in the SVD matrix would break SVD/EFA
1414 without an appropriate error message.
1415
1416 1.4.0
1417 -------
1418
1419 Release date: 2018-03-20
1420
1421 Overview
1422 ^^^^^^^^^
1423
1424 The RAW team is pleased to announce the release of RAW version 1.4.0. This is a
1425 major feature release for us! The big new feature is that RAW can now use the
1426 DENSS method to calculate electron density from SAXS scattering! You can read
1427 more about this at http://denss.org/.
1428
1429 To fully use this new feature (for density averaging and enantiomer filtering)
1430 you have to install EMAN2 (http://blake.bcm.edu/emanwiki/EMAN2/Install) which,
1431 sadly, doesn't work on Windows. Windows users can still generate densities, but
1432 they won't be able to average them. A new tutorial on DENSS in RAW is now available
1433 in the documentation (https://bioxtas-raw.readthedocs.io/en/latest/tutorial/s2_denss.html).
1434
1435 The other feature many folks will be interested in is the new error calculation
1436 for Guinier fits, which is a much requested feature. This is now available whenever
1437 you open the Guinier panel, and saves and exports with the rest of the analysis
1438 information as expected.
1439
1440 We've also done the usual set of bug fixes and tweaks. You can find a full list of changes below.
1441
1442 All changes:
1443 ^^^^^^^^^^^^
1444
1445 * Added DENSS method for calculating electron density from SAXS profiles
1446 * Added support for EMAN2 averaging and enantiomer testing of DENSS results
1447 * Fixed a bug where the GNOM window could fail to exit and save the .out file to the IFT tab
1448 * Changed the default DAMMIF mode to slow.
1449 * Changed when the 'please wait' message appears when loading SEC-SAXS files
1450 in autoupdate mode. Now it only shows up if more than 5 files are loaded at once.
1451 * Fixed a bug where advanced options for GNOM and DAMMIF couldn't be set while
1452 the respective analysis windows were open.
1453 * Fixed a bug where the spectral color map couldn't be displayed, breaking the
1454 image control panel.
1455 * Fixed a bug where ambimeter would try to run in the DAMMIF window even if
1456 ambimeter wasn't available.
1457 * Fixed a bug where if files were averaged or subtracted and had analysis history,
1458 that analysis would get transfered to the new file.
1459 * Fixed a bug where Guinier fit limits would be improperly displayed on the plot
1460 when the Guinier window was first opened.
1461 * Fixed a bug where calls to set up the DAMMIF results window could be non thread safe.
1462 * Added estimate of the parameter (Rg and I0) errors for a Guinier fit.
1463 * Reformatted the MW display to make it more compact.
1464 * Changed how numbers are displayed in all of the analysis windows, to better
1465 handle very large or very small values.
1466 * GNOM, Ambimeter, DAMMIF windows now open much faster.
1467 * Added support for BioCAT header files (new style).
1468 * Added support for autoloading of BioCAT Series curves.
1469 * Added GNOM P(r) parameters (Rg, I0) errors to the GNOM window, and the estimated Guinier errors.
1470 * Guinier parameter errors and GNOM P(r) parameter errors are now saved with
1471 profiles, and with analysis info spreadsheets.
1472 * Fixed bugs where spin controls could raises errors if a user entered a blank value.
1473 * Values from analysis windows are now saved with more precision.
1474 * Rearranged the manipulation item right click menu to make it more compact,
1475 put some less-used items on sub-menus.
1476 * Changed 'SEC' labels to 'Series' labels.
1477 * Fixed an off by one error in SEC autoupdate that could occur for certain file names.
1478 * Renamed and rearranged some menu items in the IFT item right click menu.
1479 * Added universal newline support when loading in scattering data.
1480 * Fixed a bug where averaging could fail if all the averaged files were different form the first file.
1481 * Fixed a bug where similarity testing could fail with an overflow error if
1482 there were too many points in the scattering profile.
1483 * Minor improvements to plotting speed with large numbers of files.
1484 * Fixed a bug where having no positive values in a curve displayed on a log-y
1485 axis would cause an error.
1486 * Updated the documentation to include a DENSS tutorial. Updated various other
1487 parts of the documentation, including the images, to reflect other new features.
1488 * Updated all of the installation documentation.
1489 * Removed the RAW-Windows-Source-Install-Essentials file from the downloads.
1490
1491
1492 1.3.1
1493 -------
1494
1495 Release date: 2017-11-01
1496
1497 Overview
1498 ^^^^^^^^^
1499
1500 The RAW team is pleased to announce the release of RAW version 1.3.1. This is a
1501 very minor release. Several small bugs have been fixed, and we have updated the
1502 citations in the program to reflect the release of the new RAW paper. Most of
1503 the major work in this release went into updating the documentation, which we
1504 have already released on the new website: https://bioxtas-raw.readthedocs.io/
1505
1506 All changes:
1507 ^^^^^^^^^^^^
1508
1509 * Made RAW compatible with pyFAI 0.14 (not back compatible with 0.13)
1510 * Improved the multiwire loading function
1511 * Updated some citations and error messages in the program
1512 * Revamped and updated all of the documentation and tutorials. It is now in
1513 sphinx format, in the RAW SVN for better tracking.
1514 * Updated the RAW citation to reflect the newly released RAW paper.
1515 * Updated the .app build on mac.
1516
1517
1518 1.3.0
1519 -------
1520
1521 Release date: 2017-08-19
1522
1523 Overview
1524 ^^^^^^^^^
1525
1526 The RAW team is pleased to announce the release of RAW version 1.3.0. This release
1527 is a major feature release, and we're very excited that you get to use all of the
1528 fun new stuff we’ve added in! The major new features are:
1529
1530 * Similarity testing for scattering profiles using the CorMap test. This allows
1531 statistical testing of whether or not profiles are similar. This is done
1532 automatically when averaging profiles or picking a buffer region of a SEC curve,
1533 and is also available in the right click menu for profiles, IFTs, and sec
1534 files. In the automatic check, if it detects files that may be different,
1535 you’ll see a message asking you how you want to proceed.
1536 * Normalized Kratky plots can now be made, and are accessible through the right click menu.
1537 * We’ve added a results summary panel for dammif/n reconstructions that shows the
1538 NSD, resolution (if SASRES is installed), and statistics about the individual
1539 reconstructions including chi squared, rg, dmax, excluded volume, and molecular
1540 weight. There is also a new dammif results viewer panel that lets you get a
1541 basic look at the reconstructions (this panel is still very simple).
1542 * Absolute scaling can now be done using the NIST glassy carbon standard SRM 3600.
1543
1544 In addition to all of these major changes, we’ve made the usual range of small
1545 tweaks, bug fixes, and enhancements. See the full list of changes below.
1546
1547 Finally, we’re happy to announce that we’re also releasing a new tutorial, that
1548 has been updated to include tutorials for all of the new features mentioned above!
1549
1550 All changes:
1551 ^^^^^^^^^^^^
1552
1553 * Fixed a bug where switching between linear and log scale in the image display
1554 could change the overall scaling of the image without changing the displayed
1555 limits in the dialog.
1556 * Added a new dammif/n results summary panel.
1557 * Added a new dammif/n results viewer panel.
1558 * Added a new normalized kratky plot panel
1559 * Changed how multiple images in a single file are deal with when loaded as a
1560 sec curve (now each is loaded as an individual point on the curve).
1561 * Added a new check for statistical similarity between profiles (or IFTs or SEC curves).
1562 * Now on average, RAW automatically checks whether the profiles are statistically similar.
1563 * Fixed a bug where the first image loaded from a file with multiple images in
1564 t was flipped left-to-right relative to the rest.
1565 * Fixed a bug where if a configuration file is loaded and doesn’t contain certain
1566 setting keys (a configuration made with a previous version where those settings
1567 don’t exist, for example), those settings are now set to default, rather than
1568 left as whatever is loaded in RAW.
1569 * Added ability to view all images in a single file if the file contains more than one image.
1570 * Added ability to use glassy carbon (NIST SRM 3600) to calibrate absolute scale.
1571 * Fixed a bug in subtraction that could result in the q and i vectors being rounded.
1572 * Fixed a bug where if the beam center was in the masked region of the image
1573 it could be assigned a non-zero value.
1574 * Fixed a bug where a RAW setting for a choice type with default value of None
1575 could cause an error when trying to set the field in the Advanced Options window.
1576 * Added a check for syncing items to make sure that an item is starred and an item is selected.
1577 * Added ability to reset all settings to default values from the advanced options panel.
1578 * Marker face, marker edge, and error bar colors are now saved when you save a workspace.
1579 * Error bars now show up correctly for Guinier, Kratky, and Porod axes in the Main Plots.
1580 * Added ability to use error weighting in fits, and ability for user to toggle
1581 that on and off in the advanced options panel. Fitting is now by default done
1582 with error weighting.
1583 * RAW can now load .txt files.
1584 * Fixed a bug where on a single core machine there would be no default selection
1585 for the number of simultaneous runs in the dammif/n window.
1586 * Font list now includes matplotlib fonts
1587 * Changed LaTeX symbols to default to regular instead of italics.
1588 * Fixed a bug where line size on a plot would change when opening/closing the
1589 line properties window without making any changes to the line size in the window.
1590 * Added ability to use fractional line sizes.
1591 * Fixed a typo in the readme
1592 * Removed a message asking if you’re sure you want to load the workspace.
1593 * RAW now checks whether or not you’re saving something when it quits. If it is
1594 saving something, it warns you that you might now want to quit.
1595 * Legend labels are now saved with a workspace.
1596 * Fixed a bug where the legend label for IFT items would get changed from the
1597 default when you opened the line properties window.
1598 * Fixed a bug where the calculated markers for a SEC item would show when loading
1599 a workspace even if the item wasn’t supposed to be visible.
1600 * Added sync and superimpose to the right click menu, tools menu.
1601 * Added the program version to integrated dat files history.
1602 * Added integration method and calibration parameters to the integrated dat files history.
1603 * Fixed a bug where a dammin refine would try to run even if damaver didn’t run.
1604 * Fixed a bug where superimpose could break for different q vectors.
1605 * Fixed a bug where the slider and custom color boxes in the color dialogs didn’t change line/marker colors.
1606 * Fixed a bug where in autoupdate mode the SEC plot could fail to switch between rg, mw, i0 on the right axis.
1607 * Fixed a bug where you couldn’t resize custom question dialogs.
1608 * Fixed a bug where SVD/EFA wouldn’t work with some sec data loaded in autoupdate mode.
1609 * Fixed a bug where when updating the SEC data in autoupdate mode, an improper
1610 q value could be used when getting the intensity at a given q.
1611 * Fixed a bug where if improper values were entered in the buffer range or window
1612 size and the set/update parameter button was pressed, if autoupdate mode was on it would stop.
1613 * Removed the error printing on startup that backup.ini file could not be found.
1614 * Fixed a bug where carrying out EFA to panel 3, then going back to panel 1 and
1615 changing the frame range used, then carrying out EFA again could cause an error in the rotation.
1616 * Fixed a bug where for unsubtracted profiles from images, EFA would use the full
1617 profile rather than the appropriately truncated profile.
1618 * Fixed a bug where the options panel couldn’t be opened twice in windows.
1619 * Added a check to prevent errors with missing lines when changing plot type in the main plots.
1620 * Added a check to prevent index errors when setting the q range of a sasm.
1621 * Fixed a bug where online mode would show an error if the directory being watched was removed.
1622 * Added a choice in the GNOM panel to force dmax to zero or not.
1623 * Added ability to use superimpose to find scale, offset, or scale and offset.
1624 * Fixed a bug where EFA results wouldn’t export due to getting the wrong q values from the scattering profiles.
1625 * Fixed a bug with new versions of numpy not integrating images correctly. (actually fixed in 1.2.3 rerelease)
1626 * Changed the generic error message. (actually fixed in 1.2.3 rerelease)
1627 * Fixed a bug where temporary files that vanish in the online directory could
1628 raise an error. (actually fixed in 1.2.3 re-release)
1629 * Fixed a bug that could cause intensity integration to fail in the sec plot.
1630 (actually fixed in 1.2.3 re-release)
1631 * Fixed a bug where calculating the scale constant of water could cause the main
1632 thread to lock up if it had an error.
1633 * Verified compatibility with ATSAS 2.8.2.
1634 * Fixed a bug where in the prebuilt windows version any plots not in the main
1635 window (for example, Guinier plots) couldn’t be saved.
1636 * Fixed a bug where line colors didn’t reset properly when canceling out of any
1637 of the line properties dialogs.
1638 * Fixed a bug where the SVD window could have no default selection for type of
1639 profile to use.
1640 * Fixed a bug where the advanced options window didn’t open properly centered on
1641 the parent window.
1642 * Minor speed improvements from code streamlining.
1643
1644
1645 1.2.3
1646 -------
1647
1648 Release date: 2017-05-08
1649
1650 Overview
1651 ^^^^^^^^^
1652
1653 The RAW team is pleased to announce the release of RAW version 1.2.3. The release
1654 again mostly focuses on bug fixes, speed improvements, and other small improvements
1655 to the user experience. There is one bit of exciting news: we are releasing a
1656 prebuilt version for Mac! Users can now download a .dmg with a RAW.app in it.
1657 This can be installed via drag-and-drop, like other app files, and run just like
1658 any other app. We hope this will make installation much easier for mac users.
1659 If you want to try this, the download is available in the usual area, and the
1660 mac install instructions have been updated.
1661
1662 In addition to the new prebuilt version, we’ve also made errors more obvious,
1663 now if there is an unhandled error in the program, rather than failing silently
1664 it will pop up a dialog box to let you know. We’re hoping this is seen as an improvement!
1665
1666 All changes:
1667 ^^^^^^^^^^^^
1668
1669 * Made numerous changes to fix strange behavior in frozen version on mac
1670 * Created instructions for building a frozen version on mac
1671 * RAW icon now shows up in the dock instead of the top bar on mac
1672 * Fixed how RAWWorkDir is used in the program, and how it gets set. It now gets set appropriately for each type of OS
1673 * Switched to using an embedded version of the BioXTAS logo, for easier packaging
1674 * Changed the default directory for RAW if there is no previous directory. It now uses the documents directory
1675 * Fixed a bug in the Porod volume calculation that in some cases could extrapolate to q<0
1676 * Added Guinier extrapolation to the volume of correlation molecular weight calculation
1677 * Changed how Guinier extrapolation is done for the adjusted porod volume method
1678 * Updated some of the text in the More Info buttons of the MW panel
1679 * Fixed a bug where changing the q vector of a scattering profile would print an error in the console
1680 * Updated the A and B coefficients for the adjusted porod volume method to perfectly match those used in the paper
1681 * Updated GNOM and BIFT windows to both report reduced chi squared values
1682 * Fixed a bug where having an ROI mask set could prevent loading image
1683 headers in the calibration section of the advanced settings
1684 * Tweaked the MW, GNOM, and BIFT GUIs
1685 * Fixed a bug where GNOM wouldn't run on SL6 with ATSAS 2.7.2
1686 * Fixed a bug where rescaling profiles wouldn't work on a kratky plot
1687 * Fixed a bug where IFT data plot could display the wrong scale for Guinier and Porod plots
1688 * Changed how Guinier plots are displayed from I vs. q2 on a loglin scale to
1689 log(I) vs. q2 on a linlin scale, to match with labels shown on the plot
1690 * Fixed a bug that could cause autorg to crash
1691 * Changed the circle masking tool to draw more quickly/smoothly
1692 * Improved responsiveness of dragging masks on an image
1693 * Fixed a bug where the beam center wouldn't turn off if the masking panel was closed
1694 * Improved responsiveness of updating positions of calibrant rings and beam
1695 center when working in the centering panel
1696 * Fixed some bugs that could happen when switching between calibration and
1697 masking windows without hitting the okay or cancel buttons first
1698 * Fixed a bug where VC integration was highly unstable in some cases, required
1699 switching from simpsons method to trapezoid method for numerical integration
1700 * Attempted to fix a not reproducible bug where clicking the clear all button
1701 could cause a segfault on linux
1702 * Fixed a bug so that the info panel is only cleared if the user actually decides
1703 to clear all items when clicking the clear all button
1704 * Fixed a bug where loading FoXS files with fits would not load the fit
1705 * Fixed a bug where PIL.Image couldn't load files (prevented loading of SAXSLAB300 images)
1706 * Fixed a bug where if an image load returned no header, RAW could crash
1707 * Did some futureproofing in the code
1708 * Fixed a possible memory leak when loading certain image types
1709 * Attempted to fix an irreproducible bug where masking would fail because pixel
1710 positions were floats instead of ints
1711 * Error bars, if shown, now move properly with the line on scale and offset
1712 * Fixed a bug where the Guinier window didn't respect the q limits set on the manipulation panel
1713 * Set the default plot type to log-lin instead of lin-lin
1714 * Fixed a bug where using the next/previous image buttons would cause the image
1715 to flicker if a fixed range were set for the color scale
1716 * Fixed a bug where scaling q didn't mark the item as modified
1717 * Fixed a bug where online mode loading more than one image didn't update the image plot
1718 * Changed the green for the average file name text from green to forest green, which may be easier to read
1719 * Fixed a bug where the centering panel being displayed without an image loaded could cause an error.
1720 * Fixed a bug where the ATSAS 2.8.0 GNOM wouldn’t run if an Rg for the profile had not been calculated.
1721 * Fixed a bug where DAMCLUST wouldn’t run.
1722 * Added a global error handler to pop up a dialog for unhandled errors.
1723 * Attempted to fix a bug where the program could run out of control ids on mac, causing a crash.
1724 * Fixed a bug where damclust and dammin refine could both be selected in the advanced options window.
1725 * Fixed a bug where dammin refine could be selected without damaver being selected in the advanced options window
1726 * Fixed a bug where setting a flatfield image could fail if there wasn’t an absolute scale normalization factor set
1727 * Fixed a bug where GNOM and BIFT autosaving could be turned on without directories selected.
1728 * Fixed a bug where switching from linear to log scale or vice versa with limits
1729 locked in the image display would set the slider bar maximum value incorrectly.
1730 * Removed tifffile.py (no longer used).
1731 * Fixed a bug where automated centering wouldn’t work with the newest pyFAI
1732 * Fixed a bug where typing an incomplete LaTeX expression in the plot label could cause an error.
1733 * Added some error checking to running GNOM/DATGNOM in case it fails for some reason.
1734
1735
1736 1.2.2
1737 -------
1738
1739 Release date: 2017-03-10
1740
1741 Overview
1742 ^^^^^^^^^
1743
1744 The RAW team is pleased to announce the release of RAW version 1.2.2. This release
1745 mostly focuses on bug fixes, speed improvements, and other small improvements to
1746 the user experience. However, there are several changes/new features we think
1747 many of our users may want to know about:
1748
1749 #. RAW now has the ability to do weighted averages of scattering profiles (accessible
1750 by the right click menu in the main control panel)
1751 #. RAW is now compatible with ATSAS version 2.8.0.
1752 #. You can now run DAMMIN from RAW (previously on DAMMIF was available). This
1753 includes using DAMMIN to refine the damstart.pdb file output from DAMAVER,
1754 which is now the default option.
1755 #. RAW can now handle files with multiple images in them, such as Eiger hdf5 files.
1756 This is an ongoing project, so some features, such as image viewing and SEC
1757 plotting do not yet handle these types of files perfectly.
1758 #. We have changed how the show/hide and collapse/expand buttons work. Previously
1759 they affected all items. Now if no items are selected they affect all items,
1760 otherwise they affect the selected items. We hope that once users are accustomed
1761 to this change they will find it useful.
1762 #. RAW has a new header type available, P12 Eiger header files.
1763
1764 Additionally, RAW users should be aware that we have added an additional dependency,
1765 the weave package (to replace scipy.weave, which was removed in scipy version 0.19),
1766 and that RAW is not yet compatible with matplotlib version 2.0 (released January 2017).
1767 We are working on updated install instructions to reflect these changes, and those will
1768 be available (hopefully) next week.
1769
1770 As always, we appreciate user feedback, as that is how we improve the program.
1771 If you have questions, need help, or want to report a bug, please contact us!
1772
1773 All changes:
1774 ^^^^^^^^^^^^
1775
1776 * Added ability to do a weighted average in RAW, using either error based weighting
1777 per q point or weighted by a counter value.
1778 * Many small changes to the code to streamline how plotting works, which should
1779 results in modest speed improvements, particularly when working with large numbers of plotted files.
1780 * If autoscaling is on for plots, plots should now autoscale in all appropriate
1781 instances (previously they didn't autoscale when moving items between plots,
1782 rescaling the q range, and a few other instances)
1783 * Trimmed out many dead functions to make the code easier to maintain.
1784 * Changed how the visibility check box for control panel items works, which
1785 improved show/hide speed for a single item when lots of files were loaded by a factor of 2.
1786 * Improved speed for certain actions that resulted in marking lots of items as modified.
1787 * Fixed a bug in autorg where error for the rg value could fail to be calculated
1788 * Fixed a bug in running GNOM for ATSAS <2.8 where certain advanced settings couldn't be used.
1789 * Fixed a bug where flatfielding would fail when using pyFAI to integrate images (not yet publicly available)
1790 * Fixed a bug where using the roi_counter would fail when using pyFAI to integrate images (not yet publicly available)
1791 * Fixed a bug where dezingering would fail using python for integration (instead of the compiled c++ modules)
1792 * Removed the SASIft.py file that was unused.
1793 * Fixed a bug where having nothing entered for limits in the plot options
1794 panel (such as when typing a new limit) would print an error message in the console.
1795 * Fixed a bug where loading a roi_counter header value with no image header would give an error.
1796 * Fixed a bug where legend position wasn't maintained when all items were removed or hidden on a plot.
1797 * Fixed a bug where the legend wouldn't go away if all items on the SEC plot
1798 were hidden and there had previously been a legend.
1799 * Updated how legend settings are handled in plot options to improve speed and maintainability.
1800 * Fixed a bug where plot titles and axes labels didn't reset appropriately when using the clear all button.
1801 * Fixed a bug where the plot options font selector boxes didn't work.
1802 * Fixed a bug where not all settings were restored to previous values when canceling out of the plot options dialog.
1803 * Fixed a bug where the Porod volume calculation was not getting properly interpolated to q=0.
1804 * Fixed a bug where hitting the next/previous image buttons in the RAW Image
1805 plot would throw an error and crash RAW if the image currently displayed wasn't
1806 in the current working directory of the Files panel.
1807 * Fixed a bug where saving items wasn't threadsafe on scientific linux 6.
1808 * Fixed a bug in how the error bars for log(I) were calculated in the autorg function.
1809 * Switched the autorg to calculate the Guinier fit without error weighting, to
1810 match how it is done in the Guinier panel.
1811 * Fixed a bug where the how to cite button in the dammif frame wasn't getting properly placed in wxpython < 3.0.
1812 * Addeed the ability to run dammin from the DAMMIF (now DAMMIF/N) window.
1813 * Added the ability to use dammin to refine damstart files from dammin/f in the DAMMIF window.
1814 * Fixed a bug where autoMW, autoRG did not respect the limits set for the
1815 scattering profile in the manipulation controls.
1816 * Changed how the show/hide and collapse/expand buttons work. Previously they
1817 affected all items. Now if no items are selected they affect all items, otherwise
1818 they affect the selected items.
1819 * Added compatibility for gnom5 from ATSAS 2.8.
1820 * Counters available for normalization now show up in the combo box in the normalization list panel.
1821 * Made some progress fixing a windows specific bug having to do with hitting
1822 enter after clicking a button in another panel.
1823 * Fixed some bugs on windows where the mouse would get captured and not released by txtctrl boxes.
1824 * Fixed a bug where the rename option wasn't working in the file overwrite dialog.
1825 * Moved the version number into the RAWGlobals.py file.
1826 * Improved speed of saving items from RAW, by a factor of ~160x for a large number of files on my test machine.
1827 * Fixed a bug in the Guinier panel where the maximum point shown in the plot and
1828 used for the fit was one less than the maximum point shown in the spin control.
1829 * Tweaked the autorg function to allow some intervals with qmaxRg > 1.3 (up to 1.35) to improve fitting.
1830 * Fixed a bug where interpolate did not work on multiple selected scattering profiles.
1831 * Fixed a bug where interpolate was giving the interpolated file the wrong name.
1832 * Fixed a bug where writing the header could cause RAW to crash due to improper json serialization.
1833 * Changed how normalization deals with zero values. Instead of raising an error it prints a warning.
1834 * Added the GNU disclaimer at the top of all .py files that didn't have it.
1835 * Added a header type for P12 Eiger, Petra III
1836 * Updated image loading and all associated functions to handle multiple images
1837 in a single file, for example eiger files.
1838 * Added filtering of headers so that () and [] characters are removed, as header
1839 names with these characters could not be used for normalization.
1840 * Fixed a bug where image and other headers were getting filtered differently.
1841 * Added some new file types to the TestData folder.
1842 * Added error catching for json formatting of file headers upon save. If the
1843 header can't be serialized properly, the files saves without a header (used to cause a crash).
1844 * Fixed a bug where ambimeter could fail if there were spaces in the filename.
1845 * Fixed a bug where with older versions of wxpython and matplotlib, failure to
1846 find points in the autocentering mode could cause RAW to freeze.
1847 * Fixed a bug where quick reduce would crash if it couldn't find the header.
1848 * Replaced the dependency on scipy.weave with the weave package (which is a
1849 fork of scipy.weave), as scipy.weave is removed in scipy 0.19.
1850
1851
1852 1.2.1
1853 -------
1854
1855 Release date: 2016-12-02
1856
1857 Overview
1858 ^^^^^^^^^
1859
1860 The RAW team is happy to announce the release of RAW version 1.2.1. This version
1861 focuses on bug fixes and small improvements to the user experience. There were a
1862 few significant changes:
1863
1864 #. In addition to numerous bug fixes, the EFA technique can now be used with
1865 explicit, iterative, or hybrid methods for computing the concentration profiles
1866 of the components. Previously, only the iterative approach was available.
1867 #. We added a new automated centering and calibration routine using the pyFAI
1868 library, for better determination of beam center and sample-detector distance.
1869
1870 In addition to a new version of RAW, we have also released new installation instructions for all platforms.
1871
1872 As always, we appreciate user feedback, as that is how we improve the program.
1873 If you have questions, need help, or want to report a bug, please contact us!
1874
1875 All changes:
1876 ^^^^^^^^^^^^
1877
1878 * Updated online mode so RAW only plots files if there are files to plot. This
1879 prevents some flickering when files enter the directory but are not plotted
1880 for any reason (such as not being suitable images).
1881 * Updated online mode so that the “Processing incoming file…” status doesn’t
1882 linger forever after an image is processed, but goes away suitably quickly.
1883 * Fixed a bug that prevented EFA from running on scattering profiles that don’t
1884 use the full range of their q vector.
1885 * Fixed a bug where concentration wasn’t saved when the ‘save all analysis info’ option was used.
1886 * Fixed a bug where changing SEC plot axes while SEC live update is going could cause a crash
1887 * Fixed a bug where Normalization information got saved in the scattering profile
1888 processing parameters twice, once with a capital N, once with a lowercase n.
1889 * Fixed a bug where the wrong upper limit was getting set for the end of range
1890 controls in the third EFA control panel.
1891 * Fixed a bug where if no normalizations were set in the normalization list,
1892 the solid angle correction would not be saved in the normalization history
1893 list for the scattering profile.
1894 * Made a change where if EFA has a converged solution, if the ranges are changed
1895 it uses that solution as a starting point. This leads to faster convergence to the new solution.
1896 * Added ability to display calibration rings from any calibrant in the pyFAI library.
1897 * Fixed a bug where plotting certain scattering profiles on a Kratky plot would cause RAW to crash
1898 * Fixed a bug where having the SEC plot set to display the intensity at a particular
1899 q value would prevent structural parameters from being calculated, and in
1900 some cases could prevent new SEC items from being plotted.
1901 * Fixed a bug where the plot legend wasn’t updated if the plot was turned on,
1902 then off, and then items were removed from the plot.
1903 * Added an energy box in the centering and calibration window, so that if energy
1904 is entered, wavelength is automatically calibrated, and vice versa.
1905 * Fixed a bug where changing centering values with no centering values selected
1906 could crash RAW.
1907 * Added ability to explicit calculation of concentrations for EFA, as opposed to currently iterative method.
1908 * Added ability to use a hybrid method for calculation EFA, using the explicit
1909 calculation as a starting point, then refining iteratively.
1910 * Added ability to chose rotation method for EFA in the third EFA control panel.
1911 * Fixed a bug where the range plot in the third EFA panel was not refreshing
1912 properly when the number of significant values was changed.
1913 * Fixed a bug where the info panel was not updated when a scattering profile
1914 was selected by clicking on it on the main plot.
1915 * Updated build commands for making a windows installer, including adding some
1916 explicit hooks for pyFAI and pyinstaller.
1917 * Added the optional use of the hdf5plugin to RAW to support eiger images.
1918 * Fixed a bug in the image display where the dialog box could fail to open
1919 because the maximum value in the image was greater than 2^31-1 (the maximum
1920 value a wx slider can handle).
1921 * Added a feature for automatic centering and fitting of the beam center and
1922 sample to detector distance. Requires pyFAI to be installed.
1923 * Added a header reader for g1 eiger files, which have the spec header file
1924 one level up from the image files.
1925 * Fixed a bug where the RAW ROI could not consistently be used for normalization.
1926
1927
1928 1.2.0
1929 -------
1930
1931 Release date: 2016-10-25
1932
1933 Overview
1934 ^^^^^^^^^
1935
1936 The RAW team is very pleased to announce the release of version 1.2.0. We've added
1937 two major new features, the first of which is the ability to perform SVD on a set
1938 of scattering profiles, IFTs, or a SEC-SAXS curve. We've also implemented the
1939 exciting new evolving factor analysis (EFA)[1] method for deconvolving overlapping
1940 data. This is primarily intended to be applied to SEC-SAXS data, but it is implemented
1941 so that it can be applied to any set of scattering profiles or IFTs. We want to
1942 note that while EFA is an exciting new technique, it is still in ongoing development.
1943 We intend continuing development on the stability and utility of the algorithm.
1944
1945 We will release an updated tutorial document and dataset which includes examples of doing SVD and EFA soon.
1946
1947 As always, we appreciate feedback from users, either positive or negative.
1948
1949 The RAW Team
1950
1951 [1] Steve P. Meisburger, Alexander B. Taylor, Crystal A. Khan, Shengnan Zhang,
1952 Paul F. Fitzpatrick, and Nozomi Ando. Journal of the American Chemical Society 2016 138 (20), 6506-6516.
1953
1954 All changes:
1955 ^^^^^^^^^^^^
1956
1957 * Added the solid angle correction to the normalization parameters in the sasm
1958 history, so that if it is used, that use is recorded.
1959 * Fixed a bug where SAXSLAB images could not be loaded when using version 3.0 or newer of the pillow library.
1960 * Added in the ability to use a RAW defined beamstop mask in addition to a SAXSLAB beamstop mask for SAXSLAB data.
1961 * Fixed a bug (on OSX, wxpython 3.0) where clicking the OK button in the Masking
1962 Panel was returning the plot window to the IFT panel instead of the Main Panel.
1963 * Added in some dialog boxes letting users know they can't modify the SAXSLAB
1964 header mask in RAW. Previously, the Remove and Set buttons in the masking
1965 panel appeared to work for the SAXSLAB header beamstop mask, but in reality
1966 did nothing. Now they still do nothing, but pop up a dialog letting the user
1967 know that nothing has happened (and no longer appear to do anything).
1968 * Added a molecule type choice to the SEC calculate parameters panel, so that
1969 the user no longer has to change the default molecule type in the mol weight options panel.
1970 * Fixed a bug where the Clear All button was not properly clearing some fields in the SEC control panel.
1971 * Added SVD capability.
1972 * Fixed a bug which prevented some .sec curves from being loaded.
1973 * Added overwrite checking to the .sec saving function.
1974 * Fixed a bug where the SEC item filename didn't change when the item was saved with a different name.
1975 * Made how SEC names are deal with consistent with how scattering profile names are dealt with.
1976 * Added overwrite checking to the Export data option for SEC curves.
1977 * The parameters on a SEC plot now default to markers, not lines.
1978 * Fixed a bug where in a 3 column data file with no non-data first line (empty
1979 or otherwise), the first data point would get cut off.
1980 * Added evolving factor analysis (EFA) capability
1981 * Added 'How To Cite' buttons for the RAW functions that incorporate other people's
1982 work, so that they can correctly cite the methods.
1983 * Added in backwards compatibility for loading .sec files from previous versions
1984 of RAW, and workspaces with saved .sec files from previous versions of RAW.
1985 * Saving/Loading a workspace now preserves the file order in the workspace.
1986 * Fixed a bug where selecting log axes would crash RAW if you tried to do so before loading any data.
1987 * Fixed a bug where the legend label for ift and sec items got set when it didn't need to be.
1988
1989
1990 1.1.0
1991 -------
1992
1993 Release date: 2016-08-22
1994
1995 Overview
1996 ^^^^^^^^^
1997
1998 The RAW team is happy to announce the release of version 1.1.0. While there are
1999 several significant new features, the major milestone that pushed us into version
2000 1.1 is the integration (after almost a year) of the RAW code that has been available
2001 on this website and the RAW code improvements made by Soren Skou for use with the
2002 SAXSLAB homesource machines. All of RAW is now unified, and we intend to have only
2003 one development trunk for the foreseeable future (though we may have temporary branches
2004 for major feature development).
2005
2006 We have also added in a solid angle correction for integrating images into scattering
2007 profiles. This correction accounts for the change in solid angle of a pixel as you
2008 change q. We have tested it against the solid angle correction implemented in pyFAI,
2009 and found that the results are identical. This effect will get stronger at higher
2010 q, and cause an overall increase in intensity of integrated profiles. On a Pilatus
2011 detector, the solid angle correction has a ~0.5% effect on integrated intensity
2012 at q=0.25 A^-1 and ~4% effect at q=0.75 A^-1.
2013
2014 Major new features include:
2015
2016 * The solid angle correction mentioned above
2017 * Improved speed when calculating Rg, MW, and I(0) for SEC-SAXS curves (up to a
2018 factor of 7 faster in our limited testing)
2019 * Ability to read in multiwire (.mpa) files
2020 * Ability to read in headers from SAXS beamline BL19U2 at the Shanghai Synchrotron Radiation Facility
2021 * Merging, rebinning, and interpolating now all save history information like averaging and subtracting have
2022 * Scattering profile history (either: averaging, subtracting, merging, rebinning,
2023 and interpolating, or information about loading in and normalization) can now
2024 be viewed within RAW by right clicking and selecting 'Show history'
2025 * RAW is now (mostly) compatible with wxpython 3.0 on Linux
2026
2027 Beyond these changes, there are numerous small improvements, visual tweaks, and bug
2028 fixes. You can find a full list of those below.
2029
2030 Simultaneous with this release we are also releasing updated installation guides
2031 for all platforms. We are happy to say that we are confidant enough in our ability to
2032 produce prebuilt windows installers that we now recommend that windows users install
2033 from the .msi files unless they know that they need to compile from source.
2034
2035 As always, we appreciate any feedback (positive, or, especially, negative), bug
2036 reports, and suggestions for new features!
2037
2038 All changes:
2039 ^^^^^^^^^^^^
2040
2041 * Fixed a bug that prevented BIFT from running in uncomplied mode
2042 * AutoRG now runs automatically when the Guinier window opens, assuming there is no previous Guinier analysis
2043 * Fixed a bug where BIFT failing to find a solution caused RAW to crash
2044 * If autosave is active, and a the folder vanishes, autosave now detects that, and is disabled, instead of crashing RAW
2045 * When RAW settings are loaded, all folders and files in the settings (autosave directory, online directory, flatfield file) are checked. If they cannot be found, these settings are disabled, and the user is notified.
2046 * Visual improvements of the BIFT window, DAMMIF window, and some options windows
2047 * Fixed a bug where analysis windows would show up behind the main window,
2048 where you could move them by dragging the title bar without losing focus on
2049 the analysis windows, and where you could bring them to the front without first
2050 clicking on the main window
2051 * Changed the layout in the SEC tab to be more descriptive, and to save space
2052 * Changed welcome dialog info
2053 * Fixed display problems of the Guinier and GNOM windows under wxpython 2.8 on Ubuntu
2054 * Added the ability to start online mode at startup with a predefined directory
2055 * Added the option of automatic saving of BIFT and GNOM results
2056 * Updated save functions in RAW so that files that RAW saves are not automatically loaded back into RAW
2057 * Added in option (on by default) to apply a solid angle correction to the
2058 integrated data to account for change in solid angle of the pixels with q
2059 * Fixed several small bugs with the online mode: crashing when the online mode
2060 directory ceased to exist, online mode being able to start without selecting an online directory
2061 * All counters and image header parameters now automatically have any spaces in
2062 the file name replaced with underscores, so that they do not crash the normalization
2063 * DAMCLUST is now available as an alternative to DAMAVER after running DAMMIF
2064 * Merging, rebinning, and interpolation now add to the file history in the same
2065 way that subtracting and averaging have
2066 * Added a new feature to view the file manipulation history or load history within
2067 RAW (right click on a scattering profile in the manipulation list and select 'Show history')
2068 * Added a sorting function to the .dat file saving so that file parameters should
2069 always appear in the same order in the saved file
2070 * Fixed a bug where a tiff file with the wrong header getting read in as a
2071 Pilatus tiff file would cause RAW to hang up
2072 * Added extra error catching to the file header load function
2073 * Sped up calculation of SEC-SAXS Rg, MW, and I0 by adding a threshold function.
2074 The threshold checks the ratio of integrated sample intensity (or whatever
2075 intensity is being used for the SEC plot) of the average buffer to the average
2076 sample files. If the intensity is not above the set threshold (1.02 by default),
2077 it does not try to calculate the parameters. This means all of the buffer curves
2078 are automatically skipped, and calculation is much faster. It depends on the
2079 threshold and the data, but I saw speed increases of up to ~7x. This can be
2080 set by the user in the new SEC-SAXS panel in the Advanced Options window.
2081 * Changed how normalization information is saved when a .dat file is saved.
2082 Now, normalization information is only saved when it is applied. The absolute
2083 scale factor applied is also now saved
2084 * Added more files to the list of files that can be loaded in online mode
2085 * Updated sync function so that files are only marked as modified when something is changed during the sync
2086 * Modified how the centering arrows work to catch faster clicks, and to (mostly)
2087 prevent two moves with one click (noticed on a mac)
2088 * Masks with zero area are no longer saved as masks
2089 * Added the ability to load some multiwire detector files (.mpa files)
2090 * Added the ability to read in the header for files from BL19U2 at the Shanghai Synchrotron Radiation Facility
2091 * If the image or beamline header contains a concentration key word, that is
2092 now set as the sample concentration in RAW when the image is loaded
2093 * Fixed a problem where ambimeter in the ATSAS 2.7.2 package could not be run
2094 * Fixed numerous small and large visual problems with running RAW on linux with
2095 wxpython 3.0. I now believe that RAW can be considered compatible with
2096 wxpython 3.0 on all platforms, but there are still occasional sizing issues
2097 on Linux that it does not handle perfectly
2098 * Fixed a bug where damaver and damclust would not run if the directory path contained a space
2099
2100
2101 1.0.3
2102 -------
2103
2104 Release date: 2016-07-20
2105
2106 Overview
2107 ^^^^^^^^^
2108
2109 We're releasing the latest version of RAW, 1.0.3 today. This includes several minor
2110 bug fixes. The timing of the release is done so that the version being demoed at the
2111 ACA meeting (http://www.amercrystalassn.org/2016-scientific-program#SAXS) will be
2112 identical to the latest release.
2113
2114 All changes:
2115 ^^^^^^^^^^^^
2116
2117 * Fixed a bug where saving a mask without an image loaded would cause an error.
2118 * Fixed a bug where attempting to show a SAXSLAB BS Mask without a SAXSLAB image loaded would cause an error.
2119 * Fixed a bug where autosaving for files (processed image files, averaged files,
2120 subtracted files) could be turned on without a valid save directory selected.
2121 * Added a feature so that when an autosave directory is cleared, autosave for
2122 that file type is turned off.
2123 * Fixed a bug where the final lines of the damaver output were not being shown in the dammif window.
2124 * Added some extra information to the two most common error messages we get
2125 contacted about: inability to load an image type, and inability to load a header file.
2126 * Fixed an error where if an image header contained non-unicode characters,
2127 when a scattering profile generated from that image header was saved it would
2128 crash RAW. Fixed the same error if the header was shown.
2129 * Removed some unused settings values.
2130 * Removed the brightness bar in the image settings pop up window, as it was
2131 currently disabled. This may be re-enabled in the future.
2132 * Set the image settings pop up window to have the default upper value be the
2133 max pixel value, rather than 65535.
2134 * Fixed a bug where starting two dammif runs in the same window (running it
2135 again after either aborting or letting the current runs finish) did not clear the old log tabs.
2136 * Fixed a bug where entering a wavelength longer than ~115 A resulted in an
2137 error. Now a window pops up informing you of the error and you have to re-enter the wavelength value.
2138 * Fixed a bug where the quick reduce dialog was not displaying, and thus quick reduce could not be used.
2139 * Profiles reduced using quick reduce will now have a q range corresponding to
2140 the start/end skip points in RAW, consistent with items loaded into RAW and saved from there.
2141 * Fixed a bug where certain .fit files and FoXS .dat files with 4 columns would not plot properly.
2142 * Fixed a bug where the x and y axis values of the Guinier plot were not updating when the data range was changed
2143 * Relabeled the residual plot in the Guinier window with the correct axis labels.
2144 * Updated how GNOM, BIFT, an Guinier plots are refreshed for improved speed and to remove certain display glitches.
2145 * Changed the header display in the image panel to be read only (since changes there were not saved).
2146 * Removed the automation and SANS options panels, as they had no effect. These may be reenabled in the future.
2147 * Changed the default bin size in RAW for q spacing from 2 to 1.
2148 * Removed some extraneous print statements.
2149 * Cleaned up RAWAnalysis.py code and some code in SASFileIO.py
2150 * Added ability to load .fir files.
2151 * Fixed a bug where most of the new image types added in RAW 1.0.2 were not being recognized by RAW.
2152
2153
2154 1.0.2
2155 -------
2156
2157 Release date: 2016-06-22
2158
2159 Overview
2160 ^^^^^^^^^
2161
2162 We're happy to announce that we're releasing RAW 1.0.2. This is another version
2163 focusing on small bug fixes and speed improvements, to try to increase the stability
2164 and usability of the software. As always, please report any bugs you find to us, so
2165 we can fix them!
2166
2167 The one major change is the inclusion of the fabIO package (https://pypi.python.org/pypi/fabio)
2168 for opening images. This has allowed us to support a number of new image types. RAW now
2169 supports images in the following formats:
2170
2171 * Pilatus TIff
2172 * CBF
2173 * SAXSLab300
2174 * ADSC Quantum
2175 * Bruker
2176 * Gatan Digital Micrograph
2177 * EDNA-XML
2178 * ESRF EDF
2179 * FReLoN
2180 * Nonius KappCCD
2181 * Fit2D spreadsheet
2182 * FLICAM
2183 * General Eelctric
2184 * Hamamatsu CCD
2185 * HDF5
2186 * ILL SANS D11
2187 * MarCCD 165
2188 * Mar345
2189 * Medoptics
2190 * Numpy 2D Array
2191 * Oxford Diffraction
2192 * Pixi
2193 * Portable aNy Map
2194 * Rigaku SAXS format
2195 * 16 bit TIF
2196 * 32 bit TIF
2197
2198
2199 All changes:
2200 ^^^^^^^^^^^^
2201
2202 * Removed tifffile warnings upon opening RAW
2203 * Improved the SEC-SAXS online mode based on user feedback to make it easier to work with.
2204 * Fixed an issue where active masks could be removed from memory when saving config files.
2205 * Fixed an issue where no warning was being displayed when config files failed to save properly.
2206 * Improved the speed of selecting large numbers of manipulation, IFT, and SEC items by at least 3 orders of magnitude.
2207 * Updated how loading and plotting works to improve speed by a factor of ~2.5
2208 for both loading and subtracting large numbers of items.
2209 * Updated the Plot Sec button to improve the speed of file loading in certain cases.
2210 * Fixed a bug where FLICAM images could no longer be loaded due to changes in how tiffs are loaded in pillow >=3.0
2211 * Removed some possible issues with loading items where files were not getting closed correctly.
2212 * Fixed an error where rebinning an item under certain conditions could crash RAW.
2213 * Added a warning if a users tries to update or send frames from a hidden SEC
2214 curve (assumes that they forgot to change their selection)
2215 * Fixed a big where sending the same frames twice to the main plot from a SEC
2216 curve would cause various problems with RAW.
2217 * IFT items are now marked as modified when they are renamed.
2218 * Fixed an error caused by clicking on the top item of the advanced options configuration tree
2219 * Fixed an error in the Image tab where selecting the pan/zoom buttons wouldn't
2220 always properly toggle the button in the toolbar.
2221 * Fixed a bug where the popup menu for inverting the mask couldn't show.
2222 * Fixed a bug where panning or zooming when centering would turn off the silver behenate centering rings
2223 * Fixed a bug in OS X where holding down the centering arrows didn't continuously move the beam center position
2224 * Fixed a bug where the centering arrows wouldn't move the beam center in smaller
2225 than integer steps (when holding them down).
2226 * Updated the sync function to greatly increase speed when used with lots of items.
2227 * Updated the superimpose function to greatly increase the speed when used with lots of items.
2228 * The file panel now automatically refreshes when you switch to the file tab.
2229 * Added the ability to use the common keyboard shortcut ctrl-A to select all items
2230 in the manipulation, IFT, and SEC lists.
2231 * Fixed an issue with the beam center indicator in the masking panel vanishing when it should not.
2232 * Fixed a bug where error bar color was not maintained when moving a line between different plots.
2233 * Fixed a bug where the error bar color selector for the manipulation and IFT line
2234 properties displayed the wrong color in the line properties box.
2235 * Added the ability to change the calculated line name in the SEC line properties box.
2236 * Fixed an issue where, if the legend position had been changed, it reset to the
2237 default position when the legend was updated.
2238 * Fixed an issue where the legend shadow went away when legend was updated.
2239 * Added ability to load many more image types using the fabIO library.
2240 * Fixed a bug where the wrong legend label would sometimes be used for SEC curves in windows.
2241
2242
2243 1.0.1
2244 -------
2245
2246 Release date: 2016-05-23
2247
2248 Overview
2249 ^^^^^^^^^
2250
2251 We're very happy to announce that we are releasing RAW 1.0.1. This is a minor release,
2252 concentrating on bug fixes and small changes to the user interface.
2253
2254 There is one very exciting piece of news, which is that this release comes with
2255 a prebuilt windows installer (.msi file)! This should make it much easier for those
2256 on windows to install the program. We're currently working on a similar thing for OS X.
2257
2258 We are also happy to announce that, to the best of our testing, RAW is compatible
2259 with wxpython 3.0 on OS X and Windows (Linux is still a work in progress).
2260
2261
2262 All changes:
2263 ^^^^^^^^^^^^
2264
2265 * Fixed a bug where online mode without an online filter would load files twice.
2266 * Fixed a bug which caused dammif to crash when run in a directory where the path contained a space.
2267 * Masking panel now defaults to the beamstop mask, not the ROI mask.
2268 * Fixed a bug where if OS X preview files became visible on another system, loading them would crash RAW.
2269 * Fixed an intermittent bug where in scientific linux 6 and wxpython 2.8,
2270 occasional calls to the File List would crash RAW.
2271 * Added in error catching, so attempting to load bad .cfg files (either corrupted,
2272 or non-RAW files with the same extension) doesn't crash RAW.
2273 * Added in automatic verification of saved .cfg files, to check they can be loaded back into RAW.
2274 * Scrolling with the third mouse button in the Image plot panel, but outside
2275 of an image, no longer produces errors in the console.
2276 * Moving manipulation items between plots now respects visibility of the manipulation items.
2277 * The plot axes now automatically refresh when the scale or offset of an item
2278 is changed if the axes are set to autoscale.
2279 * Tool tips now work in wxpython 3.0 on OS X
2280 * Selecting the "remove" option in a right click context menu in the Manipulation,
2281 IFT, or SEC control tabs no longer causes a seg fault in wxpython 3.0 and OS X.
2282 * Removed MM and conc from Guinier panel, to unify GUi so that MW information is only in the MW panel.
2283 * Added ability to change online mode directory without going offline and back online.
2284 * Added a sort to the online mode, so that files should load in order if multiple
2285 files are detected in a given online mode load sequence.
2286 * Added a size check to the online mode load, so that if a file fails to load
2287 because it hadn't finished writing/copying, it should load when it is finished.
2288 * Removed the Load button in the SEC control panel .SEC items are now loaded automatically once the file is selected.
2289 * Added an online mode for SEC-SAXS
2290 * Fixed a bug in how SEC-SAXS data was updated when no parameters were being calculated.
2291 * Added a feature so that RAW's online mode will not load in files that RAW saves in the online directory.
2292 * Fixed a bug occasionally preventing the ATSAS directory from being automatically detected.
2293 * Changing control tabs now automatically clears/loads the info window as appropriate.
2294 * Fixed a bug with running datgnom from inside RAW that caused it to fail in certain circumstances.
2295
2296
2297 1.0.0
2298 -------
2299
2300 Release date: 2016-05-06
2301
2302 Overview
2303 ^^^^^^^^^
2304
2305 Very exciting news, we're moving the project out of beta! That doesn't mean there
2306 aren't still bugs, or that we're done adding features. But it does mean that we're
2307 happy with the current build (and that we ran out of numbers to increment in beta).
2308
2309 The major new features in this release:
2310
2311 * Added support for running GNOM from RAW
2312 * Added support for running DAMMIF from RAW
2313 * Added support for running DAMAVER from RAW
2314 * Added support for running AMBIMETER from RAW
2315 * Major overhaul of the IFT panel, so it actually works, which involved changing how BIFT is run.
2316
2317
2318 All other changes:
2319 ^^^^^^^^^^^^^^^^^^^
2320
2321 * Added support for reading in FoXS .dat files that have both experimental and model intensities in them
2322 * Fixed a bug where after using the Clear SEC data button RAW could still think
2323 there were unsaved changes in the SEC panel
2324 * After removing an item from a plot, the plot axes will automatically resize
2325 \(unless automatic axes size is turned off in plot options)
2326 * Added a README file in the RAW directory with information on installation and getting help
2327 * Fixed an issue with the porod volume MW calculator crashing if the scattering
2328 profile extended to q greater than 0.45 A^-1
2329 * Fixed a bug where MW for RNA was not properly calculated in the SEC plot
2330 * Added ability to save all integrated scattering profiles from a SEC curve as dats
2331 * Fixed an issue where header for save analysis csv files was not using the correct delimiter
2332 * Fixed an issue where beam center did not initially show up correctly in the centering/calibration panel
2333 * Fixed a bug where changing font size for the plot title and axis labels had no effect
2334 * Fixed an issue where the home button in the sec plot didn't work if the calc data existed but was not shown
2335 * Added complied windows 8 extensions, updated compiled windows 7 extensions.
2336 * Various other small bug fixes.
2337
2338
2339 1.0.0b
2340 -------
2341
2342 Release date: 2016-03-24
2343
2344 Overview
2345 ^^^^^^^^^
2346
2347 We are proud to announce that RAW version 1.0.0b has been released for download!
2348 This version includes a huge number of new features and bug fixes.
2349
2350 Our favorite new features are:
2351
2352 * Easy processing of in-line SEC-SAXS data
2353 * New molecular weight panel for calculating mol. weight from the volume of correlation,
2354 adjusted porod volume, and absolute scaling.
2355 * AutoRG now available.
2356 * Uncompiled running, which allows RAW to run as long as the appropriate python
2357 packages are installed, even if the extension files cannot be compiled.
2358 * Files saved as .dats now automatically save all analysis information in the
2359 header, and reload it into RAW when loaded again.
2360
2361 We have also made significant improvements to speed and responsiveness:
2362
2363 * Sped up loading and plotting for large numbers of files on a test machine by a factor of ~30
2364 * Sped up subtraction of large numbers of scattering profiles by a factor of ~4
2365 * Improved responsiveness when large numbers of scattering profiles are plotted.
2366
2367 Also, there are new, up-to-date install guides available for Windows, Mac, and Linux.
2368 Check them out in the files tab.
2369
2370 Finally, we have cleaned up both the code repository and the files area.
2371
2372 If you have questions, or feedback, please contact us!
2373
2374
2375 All changes:
2376 ^^^^^^^^^^^^
2377
2378 SEC-SAXS data processing:
2379
2380 Added capability to process SEC-SAXS data. This included adding a new SEC tab in
2381 the control panel, a new SEC plot, and a new SECM data class.
2382
2383 SEC-SAXS data is collected by continuous framing of the detector while sample is
2384 being pumped through a column. The output of that column is connected to the SAXS
2385 cell. The new RAW addition allows users to load all of the detector images collected
2386 during column elution into a new data type, the SECM. The overall frame intensity is
2387 plotted vs. frame number or time, and this should look very similar to the UV-chromatograph
2388 that an FPLC produces. The users can then select a range of frames from this curve, and
2389 send them to the main plot for processing as normal.
2390
2391 Additionally, the users can select a specified buffer range, and an average window
2392 size. The window is then slid across the curve, and the scattering profiles within
2393 the window are averaged. The averaged buffer is subtracted from the curves in the
2394 window, and radius of gyration, molecular weight, and I(0) are automatically calculated.
2395 These are then plotted on the same plot as the 'SAXS chromatograph' (intensity vs.
2396 frame #), allowing users to quickly get a feel for what is in each peak they measured.
2397
2398 Major code additions:
2399
2400 * There is now a SEC Panel, SEC Item panel, and SEC Control panel class, based
2401 on the Manipulation panel and Item Panel in RAW.py.
2402 * There is now a new plot class in RAWPlot.py, the SECPlot, which allows for
2403 multiple axes on the same plot, and handles the various plotting options.
2404 * There is a SECM class in SASM.py, which is the data structure for this new thing.
2405 * There is a new SASCalc.py file, which contains the autorg and automw functions.
2406 The autorg is pure python, based on the ATSAS package autorg function. It could
2407 probably use some tuning of the various parameters. The automw is also purely
2408 python, and based on the Rambo & Tainer correlation volume method for determining molecular weight.
2409 * There is a new save/load format, extension .sec, for saving SEC objects.
2410 * The SEC data is saved when the workspace is saved.
2411 * Various bits and pieces everywhere have been adjusted to accommodate these new panels.
2412
2413 Online mode filtering:
2414
2415 * Added an online mode section in the advanced option panel. This allows you to
2416 turn on online filtering, and give a set of strings that allow you to ignore
2417 certain files when they enter the watched folder. You can either set a list
2418 of strings in the file name to ignore, or a list of strings that must be in
2419 the file name, or some combination. You can also set the location where these
2420 strings must occur: at the start, end, or anywhere.
2421
2422 MW Panel:
2423
2424 * Added a new analysis panel for finding MW. It has methods for MW by I(0)
2425 ratio (also in Guinier plot), MW by the Rambo & Tainer method of the volume
2426 of correlation, MW by the Porod volume (corrected by the method of Fisher),
2427 and MW by absolute intensity.
2428 * Users can modify default calculation values for the MW in the advanced options MW panel.
2429
2430 Speed improvements:
2431
2432 * Changed the loadAndPlot function so that it only updates the curves on the
2433 plot every 20 curves loaded (and at the end), and only updates the legend
2434 after all the curves are loaded. On my machine, for ~400 data files (pilatus
2435 100K tiffs) this sped up loading and plotting by ~30x (~40 s vs. 20 minutes & 15 s).
2436 * Changed the subtractItems function so that it only updates the curves on the
2437 plot every 20 curves loaded (and at the end), and only updates the legend after
2438 all the curves are loaded, as with the _loadAndPlot function. On my machine,
2439 this sped up subtraction by ~4x (1 min 7 s vs. 4 min 5 s for ~400 manipulation items).
2440 * Updated online mode to take advantage of the faster plotting, by passing all
2441 of the files to be plotted to ‘loadAndPlot’ at once, rather than one at a time
2442 \(will only matter if files are coming in faster than the online mode update timer)
2443 * Changed the legend to be off by default (since it significantly hinders
2444 performance). Changed the update legend and the legend plot options dialog
2445 functions so that this all still works. This seemed to improve load in performance
2446 for ~400 data files by ~15% (35 s compared to 40 s).
2447
2448 Uncompiled running:
2449
2450 * Removed all attempts to compile unused extensions.
2451 * Added in try/except cycles for importing and compiling compiled extensions.
2452 * Rewrote compiled extensions scipy.weave code (essentially c code) as pure python.
2453 * Set it so that if RAW is unable to compile extensions, it displays a warning
2454 message to users on startup, and then runs with the pure python versions.
2455 * Compilation is particularly an issue on windows, so hopefully this will make
2456 deploying to windows much easier (even though the program will run slower).
2457 Particularly for versions where a windows installer is not available.
2458 * This required the inclusion of a RAWGlobals file, which contains a variable
2459 that notes whether or not the compiled extensions were successfully imported.
2460
2461 Minor changes:
2462
2463 * Switched from PIL to pillow. PIL is not longer under active development, pillow
2464 is a fork of PIL that is still supported. Also, pillow is included in the default
2465 enthought python installation, while PIL no longer is.
2466 * Fixed an issue where integrated scattering profiles could end up with different
2467 numbers of points. This was simply disabling the zero trim command in the integration routine.
2468 * Added in an option to skip points at the end of a scattering profile (identical
2469 to the skip at the beginning). This was needed after the removal of the zero
2470 trim command when you have entire range of high q masked out (such as to
2471 eliminate shadowing from the beam pipe). This setting is accessible in the
2472 advanced options calibration dialog.
2473 * Added in a parse function and header profile for log files from the BioCAT beamline.
2474 * Removed the requirement that the beam position be an integer.
2475 * Added in the ability to add a ‘zero line’ to the main plots (a horizontal
2476 line at y=0), in the plot options dialog.
2477 * Fixed the plot options dialog so that it can be opened when no items are loaded in the plot.
2478 * Fixed how the plot options dialog handles legend settings, so it doesn’t break
2479 if there are no curves already plotted.
2480 * Fixed plot options so that setting x limits and y limits when auto limits
2481 is not checked actually affects the graph. Also fixed the limits so that they
2482 properly acquire the current axis limits when plot options is opened.
2483 * Made it so that turning auto fitting axes back on forces the plot to autofit
2484 the axes when the plot option dialog is closed with the okay button.
2485 * Fixed a bug where the legend would turn on when an item was hid/shown in the
2486 manipulation panel, even if the legend was previously turned off.
2487 * Fixed a bug where error bars didn’t turn off when an item was hidden in the
2488 manipulation panel with error bars turned on.
2489 * Made it so that the borders check boxes in the plot options window actually
2490 cause the borders (and tick marks) to turn on and off in the plot.
2491 * Changed the Guinier plot panel so that it automatically updates the MW when
2492 the concentration is entered (instead of needing one of the up/down arrows
2493 to be hit in the spin control)
2494 * Fixed a bug where the MW of a SASM object wasn’t updated when the SASM object
2495 was set as a MW standard.
2496 * Fixed a bug in the menu creation of the file browser pane where the right
2497 click menu wouldn’t open on a mac (wxpython >=2.9.2.4)
2498 * Fixed a bug where the concentration of a sasm object was getting improperly
2499 set when the clearinfo function in the information panel was called.
2500 * Made the info panel Rg, MW, and I(0) boxes read only, since user modified
2501 values in those boxes aren’t saved
2502 * Made the info panel conc box update whenever it gets text, so that if you
2503 update the concentration and click on another sasm it still saves the concentration.
2504 * Fixed the options window not opening at the right size.
2505 * Switched to using json to save/load sasm parameter dictionary contents in .dat files.
2506 This allows easy saving and loading of dictionaries in human readable format. So
2507 now all parameters (header, counters, analysis, etc) are loaded. NOTE: THIS
2508 IS NOT STRICTLY BACKWARD COMPATIBLE. RAW can still load old .dat files (and
2509 primus .dat files), but it cannot load analysis information out of the old
2510 files. This doesn’t really affect anything, as for the old files the analysis
2511 information didn’t load anyways.
2512 * Modified how saving of averaged files history is done. Added in saving of
2513 subtracted files history. Now all of the averaging and subtracting manipulation
2514 history of a file is saved in the history entry of the parameters dictionary.
2515 This works even when you average or subtract files that are already averaged or
2516 subtracted. It is mostly human readable in the saved .dat file (though as you
2517 get more layers deep in averaging or subtracting it gets hard to tell what is what).
2518 * Fixed a bug where the correct qmin and qmax weren’t loading in the Guinier
2519 window when a previous Guinier analysis had been done.
2520 * Changed it so that when guinier or mol. weight analysis is done, if the results
2521 are different from previous analysis, the scattering profile is marked as modified
2522 to denote that the results are not saved.
2523 * Fixed a bug where plot axes didn’t auto resize when curves were moved from the
2524 top main plot to the bottom main plot and vice versa.
2525 * Fixed a bug where selecting ‘Help!’ in the help menu crashed RAW. No in-program
2526 help is yet available, but a message dialog now tells the user to look for help
2527 on the raw project homepage.
2528 * Set ‘okay’ button to be selected by default in the welcome window.
2529 * Fixed a bug where on mac, last saved settings wouldn’t load from the dialog
2530 on startup (this may have also been affecting other OSes).
2531 * Enabled normalization by ROI counter using an ‘ROI counter mask’ (formerly
2532 called a transparent beamstop mask).
2533 * Fixed a bug where minor tick marks weren’t turning off for log axes that weren’t
2534 shown (such as top and right) (I believe this was introduced by an updated version
2535 of matplotlib, I don’t remember seeing it before).
2536 * Fixed the logarithmic image scale display in the image panel. It works now,
2537 and is enabled.
2538 * Disabled nexus support to remove error on starting raw (can be easily re-enabled,
2539 it is simply commented out in a couple places in SASFileIO).
2540 * Updated the manipulation and IFT item saves so that it offers the choice to
2541 rename the file when saving a single file, and so that there are more explicit
2542 instructions when saving multiple files.
2543 * Fixed a bug in the rebin function, where it wasn’t setting the qrange according
2544 to the original sasm.
2545 * Fixed a bug where comparison of q vectors to test for subtraction was done
2546 by length rather than elementwise by q.
2547 * When scattering profiles with different q vectors are subtracted, choosing
2548 to force the subtraction now actually carries out the subtraction (with appropriate
2549 matching/rebinning of the q vectors).
2550 * Fixed a bug so that the average function now tests the q vectors point wise,
2551 rather than by length, to make sure they actually match.
2552 * Added a feature to export all analysis information from sasm objects as an
2553 alternative to selecting which analysis features you want to save.
2554 * Update the old save analysis feature to be called ‘save item info’ in the menu,
2555 since it can save things that aren’t analysis. Updated the layout of that window
2556 a little bit, and added ability to save the new MW analysis info into the item.
2557 * Added scattering profile manipulation into the tools menu: average, subtract, merge,
2558 rebin, interpolate, normalize by concentration, change q scale, set as MW standard.
2559 * Upon quitting, RAW now checks whether there are unsaved changes to manipulation or
2560 SEC items, and asks for confirmation of quitting if there are.
2561 * Added show image, show data, show header options to the view menu.
2562 * File list maintains sort order upon refresh.
2563 * Doing a Guinier fit on a scattering profile that is all zeros no long crashes RAW.
2564 * Subtraction can handle mismatched q vectors.
2565 * Autosave for averaged and subtracted files now available.
2566 * Features supporting SAXSLab300 image format now available.