Debian Codegraph @

texmf-dist/fonts/source/public/lxfonts/lmsam8.mf

raw
1 %% This is file LMSMA8 copied and modified from MSAM10 by American Mathematical
2 %% Society, so as to change all the parameters and see what happens with the slides-font
3 %% parameters; hopefully a new font is obtained that better matches the slides fonts
4 % with their characteristic large x-height and small ascender height; with math symbols
5 % this should not be so important, but ...
6 %%
7 %% Claudio Beccari 2007
8 %
9 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
10 if unknown cmbase: input cmbase fi
11
12 font_identifier:="LMSAM"; font_size 8pt#;
13
14 u#:=20/36pt#; % unit width
15 width_adj#:=0/36pt#; % width adjustment for certain characters
16 serif_fit#:=-10/36pt#; % extra sidebar near lowercase serifs
17 cap_serif_fit#:=-14/36pt#; % extra sidebar near uppercase serifs
18 letter_fit#:=0pt#; % extra space added to all sidebars
19
20 body_height#:=220/36pt#; % height of tallest characters
21 asc_height#:=200/36pt#; % height of lowercase ascenders
22 cap_height#:=197/36pt#; % height of caps
23 fig_height#:=190/36pt#; % height of numerals
24 x_height#:=150/36pt#; % height of lowercase without ascenders
25 math_axis#:=80/36pt#; % axis of symmetry for math symbols
26 bar_height#:=80/36pt#; % height of crossbar in lowercase e
27 comma_depth#:=40/36pt#; % depth of comma below baseline
28 desc_depth#:=40/36pt#; % depth of lowercase descenders
29
30 crisp#:=18/36pt#; % diameter of serif corners
31 tiny#:=18/36pt#; % diameter of rounded corners
32 fine#:=8/36pt#; % diameter of sharply rounded corners
33 thin_join#:=8/36pt#; % width of extrafine details
34 hair#:=23/36pt#; % lowercase hairline breadth
35 stem#:=23/36pt#; % lowercase stem breadth
36 curve#:=23/36pt#; % lowercase curve breadth
37 ess#:=23/36pt#; % breadth in middle of lowercase s
38 flare#:=21/36pt#; % diameter of bulbs or breadth of terminals
39 dot_size#:=28/36pt#; % diameter of dots
40 cap_hair#:=23/36pt#; % uppercase hairline breadth
41 cap_stem#:=27/36pt#; % uppercase stem breadth
42 cap_curve#:=27/36pt#; % uppercase curve breadth
43 cap_ess#:=27/36pt#; % breadth in middle of uppercase s
44 rule_thickness#:=20/36pt#; % thickness of lines in math symbols
45
46 dish#:=0/36pt#; % amount erased at top or bottom of serifs
47 bracket#:=00/36pt#; % vertical distance from serif base to tangent
48 jut#:=0/36pt#; % protrusion of lowercase serifs
49 cap_jut#:=00/36pt#; % protrusion of uppercase serifs
50 beak_jut#:=0/36pt#; % horizontal protrusion of beak serifs
51 beak#:=0/36pt#; % vertical protrusion of beak serifs
52 vair#:=18/36pt#; % vertical diameter of hairlines
53 notch_cut#:=23/36pt#; % maximum breadth above or below notches
54 bar#:=18/36pt#; % lowercase bar thickness
55 slab#:=19/36pt#; % serif and arm thickness
56 cap_bar#:=19/36pt#; % uppercase bar thickness
57 cap_band#:=19/36pt#; % uppercase thickness above/below lobes
58 cap_notch_cut#:=23/36pt#; % max breadth above/below uppercase notches
59 serif_drop#:=0/36pt#; % vertical drop of sloped serifs
60 stem_corr#:=.5/36pt#; % for small refinements of stem breadth
61 vair_corr#:=.5/36pt#; % for small refinements of hairline height
62 apex_corr#:=4/36pt#; % extra width at diagonal junctions
63
64 o#:=6/36pt#; % amount of overshoot for curves
65 apex_o#:=2/36pt#; % amount of overshoot for diagonal junctions
66
67 slant:=.25; % tilt ratio $(\Delta x/\Delta y)$
68 fudge:=.95; % factor applied to weights of heavy characters
69 math_spread:=.4; % extra openness of math symbols
70 superness:=1/sqrt2; % parameter for superellipses
71 superpull:=1/10; % extra openness inside bowls
72 beak_darkness:=0; % fraction of triangle inside beak serifs
73 ligs:=2; % level of ligatures to be included
74
75 square_dots:=true; % should dots be square?
76 hefty:=true; % should we try hard not to be overweight?
77 serifs:=false; % should serifs and bulbs be attached?
78 monospace:=false; % should all characters have the same width?
79 variant_g:=false; % should an italic-style g be used?
80 low_asterisk:=false; % should the asterisk be centered at the axis?
81 math_fitting:=true; % should math-mode spacing be used?
82
83 % the following font parameters are explained in {\sl The \TeX book}, Appendix G
84 subs:=6/8; % subscripts to 10pt will normally be in 7pt type
85 rth#:=.4pt#; % assume that rules will come from cmex10
86 fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
87 math_axis#+3.51rth#+36/36pt#+subs*desc_depth#, % num1
88 math_axis#+1.51rth#+24/36pt#, % num2
89 math_axis#+1.51rth#+38/36pt#, % num3
90 -(math_axis#-3.51rth#-subs*fig_height#-98/36pt#), % denom1
91 -(math_axis#-1.51rth#-subs*fig_height#-24/36pt#), % denom2
92 7.99pt#-subs*asc_height#, % sup1
93 6.99pt#-subs*asc_height#, % sup2
94 82/36pt#, % sup3
95 36/36pt#, % sub1
96 72/36pt#, % sub2
97 subs*asc_height#-36/36pt#, % sup\_drop
98 18/36pt#, % sub\_drop
99 11.9pt#, % delim1
100 9.1pt#, % delim2
101 math_axis#; % axis\_height
102
103 %% include these parameters to shrink R and S so they
104 %% fit inside a circle
105 %
106 lower.u#:=22/36pt#; % unit width
107 lower.width_adj#:=3/36pt#; % width adjustment for certain characters
108 lower.cap_serif_fit#:=-12/36pt#; % extra sidebar near uppercase serifs
109 lower.letter_fit#:=0pt#; % extra space added to all sidebars
110
111 lower.body_height#:=180/36pt#; % height of tallest characters
112 lower.cap_height#:=160/36pt#; % height of caps
113 lower.x_height#:=120/36pt#; % height of lowercase without ascenders
114 lower.bar_height#:=72/36pt#; % height of crossbar in lowercase e
115 lower.comma_depth#:=35/36pt#; % depth of comma below baseline
116
117 lower.flare#:=15/36pt#; % diameter of bulbs or breadth of terminals
118 lower.cap_hair#:=21/36pt#; % uppercase hairline breadth
119 lower.stem#:=21/36pt#; % lowercase stem breadth
120 lower.cap_stem#:=23/36pt#; % uppercase stem breadth
121 lower.cap_curve#:=23/36pt#; % uppercase curve breadth
122 lower.cap_ess#:=23/36pt#; % breadth in middle of uppercase s
123
124 lower.cap_jut#:=0/36pt#; % protrusion of uppercase serifs
125 lower.beak_jut#:=7/36pt#; % horizontal protrusion of beak serifs
126 lower.beak#:=0/36pt#; % vertical protrusion of beak serifs
127 lower.slab#:=12/36pt#; % serif and arm thickness
128 lower.cap_bar#:=12/36pt#; % uppercase bar thickness
129 lower.cap_band#:=15/36pt#; % uppercase thickness above/below lobes
130 lower.cap_notch_cut#:=21/36pt#; % max breadth above/below uppercase notches
131
132 lower.o#:=6/36pt#; % amount of overshoot for curves
133 lower.apex_o#:=2/36pt#; % amount of overshoot for diagonal junctions
134
135 lower.fudge:=.85; % factor applied to weights of heavy characters
136
137
138 generate lamsya % switch to the driver file