| 1 |
% BEGIN semlayer.doc |
| 2 |
%% |
| 3 |
\def\fileversion{1.0} |
| 4 |
\def\filedate{93/04/01} |
| 5 |
%% |
| 6 |
%% LaTeX style option `semlayer.sty'. |
| 7 |
%% For use with LaTeX v2.09 and the `seminar' document style. |
| 8 |
%% |
| 9 |
%% COPYRIGHT 1993, by Timothy Van Zandt, [email protected] |
| 10 |
%% |
| 11 |
%% This file may be distributed and/or modified under the conditions of |
| 12 |
%% the LaTeX Project Public License, either version 1.2 of this license |
| 13 |
%% or (at your option) any later version. The latest version of this |
| 14 |
%% license is in: |
| 15 |
%% |
| 16 |
%% http://www.latex-project.org/lppl.txt |
| 17 |
%% |
| 18 |
%% and version 1.2 or later is part of all distributions of LaTeX version |
| 19 |
%% 1999/12/01 or later. |
| 20 |
%% |
| 21 |
%% |
| 22 |
% ************************************************************************** |
| 23 |
% This is `semlayer.doc', which contains the documented code for |
| 24 |
% `semlayer.sty'. You can use it in this form as the input file |
| 25 |
% `semlayer.sty'. You can also create a stripped input file using |
| 26 |
% sem-make.tex. You can print the documented code using sem-code.tex. |
| 27 |
% sem-make.tex and sem-code.tex are distributed with seminar.sty. |
| 28 |
% ************************************************************************** |
| 29 |
% |
| 30 |
% \EndDocPreamble |
| 31 |
% |
| 32 |
% \CheckSum{276} |
| 33 |
% \CharacterTable |
| 34 |
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z |
| 35 |
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z |
| 36 |
% Digits \0\1\2\3\4\5\6\7\8\9 |
| 37 |
% Exclamation \! Double quote \" Hash (number) \# |
| 38 |
% Dollar \$ Percent \% Ampersand \& |
| 39 |
% Acute accent \' Left paren \( Right paren \) |
| 40 |
% Asterisk \* Plus \+ Comma \, |
| 41 |
% Minus \- Point \. Solidus \/ |
| 42 |
% Colon \: Semicolon \; Less than \< |
| 43 |
% Equals \= Greater than \> Question mark \? |
| 44 |
% Commercial at \@ Left bracket \[ Backslash \\ |
| 45 |
% Right bracket \] Circumflex \^ Underscore \_ |
| 46 |
% Grave accent \` Left brace \{ Vertical bar \| |
| 47 |
% Right brace \} Tilde \~} |
| 48 |
% |
| 49 |
% |
| 50 |
% \section{Overlays} |
| 51 |
% |
| 52 |
% The main thing that the "\process@slide" macro does is successively send the |
| 53 |
% main slide and then each overlay and layer to a slide output routine. In |
| 54 |
% order to make the definition of that macro easier to understand, we first |
| 55 |
% set up the overlays interface. |
| 56 |
% |
| 57 |
% Overlays must be implemented by some extra macros, such as in |
| 58 |
% "semcolor.sty". Specifically, the commands "\@overlay" and "\make@overlay" |
| 59 |
% should be defined. |
| 60 |
% |
| 61 |
% The reason for including the interface in "seminar.sty" is to encourage |
| 62 |
% those who implement overlays to use a uniform interface, and to illustrate |
| 63 |
% how overlays work. To be honest, though, it may not be possible to implement |
| 64 |
% overlays without PostScript or a graphics language with similar capabilities |
| 65 |
% using the interface that is defined here and without rewriting the basic |
| 66 |
% slides macros. |
| 67 |
% |
| 68 |
% This system of overlays is so good and the system using invisible fonts is |
| 69 |
% so lousy, that no special provisions have been made for supporting the |
| 70 |
% latter. Actually, overlay should (and could easily) be implemented as \TeX{} |
| 71 |
% primitives, saving everyone a lot of trouble. |
| 72 |
% |
| 73 |
% The system for overlays is not explained here in great detail. See |
| 74 |
% "semcolor.sty" and "pstricks.tex" for an example of how overlays can be |
| 75 |
% implemented. |
| 76 |
% |
| 77 |
% \begin{macrocode} |
| 78 |
\addto@hook\before@newslide{% |
| 79 |
\global\def\overlay@list{}% |
| 80 |
\setcounter{overlay}{0}} |
| 81 |
% \end{macrocode} |
| 82 |
% |
| 83 |
% \begin{macro}{\process@slide,\overlay@loop,\layer@loop} |
| 84 |
% "\process@slide" is the beginning of the ``output'' routine for slides. |
| 85 |
% "\@slidebox" is copied to "\@@slidebox". The "\make@overlay#1" macro should |
| 86 |
% set "\@slidebox" to the contents of "\@@slidebox", but with only the |
| 87 |
% material for overlay "#1" visible. |
| 88 |
% \begin{macrocode} |
| 89 |
\newbox\@@slidebox |
| 90 |
\def\process@@slide{% |
| 91 |
\ifx\overlay@list\@empty |
| 92 |
\finish@slide |
| 93 |
\output@slide |
| 94 |
\else |
| 95 |
\setbox\@@slidebox\box\@slidebox |
| 96 |
\make@overlay{0}% |
| 97 |
\finish@slide |
| 98 |
\output@slide |
| 99 |
{\let\theoverlay\theslide\layer@loop{0}}% |
| 100 |
\overlay@loop |
| 101 |
\fi} |
| 102 |
\def\overlay@loop{% |
| 103 |
\begingroup |
| 104 |
\overlay@prep |
| 105 |
\c@overlay=1 |
| 106 |
\@whilenum\c@overlay<10 |
| 107 |
\do{% |
| 108 |
\test@member{\the\c@overlay}{\overlay@list}% |
| 109 |
\if@test |
| 110 |
\make@overlay{\the\c@overlay}% |
| 111 |
\finish@slide |
| 112 |
\output@slide |
| 113 |
\fi |
| 114 |
\layer@loop{\the\c@overlay}% |
| 115 |
\advance\c@overlay by 1}% |
| 116 |
\endgroup} |
| 117 |
\def\layer@loop#1{% |
| 118 |
\begingroup |
| 119 |
\layer@prep |
| 120 |
\@for\currlayer:=\layer@list\do{% |
| 121 |
\test@member{#1-\currlayer}{\overlay@list}% |
| 122 |
\if@test |
| 123 |
\make@overlay{#1-\currlayer}% |
| 124 |
\finish@slide |
| 125 |
\output@slide |
| 126 |
\fi}% |
| 127 |
\endgroup} |
| 128 |
% \end{macrocode} |
| 129 |
% \end{macro} |
| 130 |
% |
| 131 |
% |
| 132 |
% \begin{macro}{\layer@prep,\overlay@prep} |
| 133 |
% \begin{macrocode} |
| 134 |
\def\layer@prep{% |
| 135 |
\ifarticle\pagestyle{\layer@pagestyle}\fi |
| 136 |
\let\thepage\thelayer |
| 137 |
\ifx\thelayerframe\@empty\else\let\theslideframe\thelayerframe\fi |
| 138 |
\let\slidelabel\layerlabel} |
| 139 |
\def\overlay@prep{% |
| 140 |
\ifarticle\pagestyle{\overlay@pagestyle}\fi |
| 141 |
\let\thepage\theoverlay |
| 142 |
\ifx\theoverlayframe\@empty\else\let\theslideframe\theoverlayframe\fi |
| 143 |
\let\slidelabel\overlaylabel} |
| 144 |
% \end{macrocode} |
| 145 |
% \end{macro} |
| 146 |
% |
| 147 |
% \begin{macro}{\layerframe,\overlayframe} |
| 148 |
% \begin{macrocode} |
| 149 |
\def\layerframe{\@slideframe{layer}} |
| 150 |
\def\overlayframe{\@slideframe{overlay}} |
| 151 |
\def\thelayerframe{} |
| 152 |
\def\theoverlayframe{} |
| 153 |
% \end{macrocode} |
| 154 |
% \end{macro} |
| 155 |
% |
| 156 |
% \begin{macro}{\overlaylabel,\layerlabel} |
| 157 |
% \begin{macrocode} |
| 158 |
\def\overlaylabel{\bf Overlay \theoverlay} |
| 159 |
\def\layerlabel{\bf Layer \thelayer} |
| 160 |
% \end{macrocode} |
| 161 |
% \end{macro} |
| 162 |
% |
| 163 |
% \begin{macro}{\theoverlay,\thelayer} |
| 164 |
% \begin{macrocode} |
| 165 |
\newcounter{overlay} |
| 166 |
\def\theoverlay{\theslide-\alph{overlay}} |
| 167 |
\def\currlayer{} |
| 168 |
\def\thelayer{\theoverlay-\currlayer} |
| 169 |
% \end{macrocode} |
| 170 |
% \end{macro} |
| 171 |
% |
| 172 |
% \begin{macro}{\ifoverlays,\iflayers} |
| 173 |
% Overlays and layers can be turned on and off independently. |
| 174 |
% \begin{macrocode} |
| 175 |
\newif\ifoverlays |
| 176 |
\newif\iflayers |
| 177 |
\@ifundefined{@overlay}% |
| 178 |
{\let\@overlay\relax}% |
| 179 |
{\ifarticle\else\overlaystrue\layerstrue\fi} |
| 180 |
% \end{macrocode} |
| 181 |
% \end{macro} |
| 182 |
% |
| 183 |
% \begin{macro}{\nooverlays@err,\@overlay} |
| 184 |
% "\@overlay" is set to "\relax" if it is not defined, for easy error |
| 185 |
% detection. |
| 186 |
% \begin{macrocode} |
| 187 |
\def\nooverlays@err{% |
| 188 |
\@seminarerr{You need to use additional macros for overlays, |
| 189 |
e.g., semcolor.sty}\@ehd |
| 190 |
\global\overlaysfalse |
| 191 |
\global\layersfalse} |
| 192 |
\@ifundefined{@overlay}{}{} |
| 193 |
% \end{macrocode} |
| 194 |
% \end{macro} |
| 195 |
% |
| 196 |
% |
| 197 |
% \begin{macro}{\overlay} |
| 198 |
% The "\overlay" command starts by checking that the argument is a number |
| 199 |
% between 0 and 9. If so, "\@overlay" is invoked. Except for overlay 0, the |
| 200 |
% counter for cross-references is set to "overlay", and its value is set to |
| 201 |
% the argument of "\overlay". |
| 202 |
% \begin{macrocode} |
| 203 |
\def\overlay#1{% |
| 204 |
\ifoverlays\ifx\@overlay\relax\nooverlays@err\fi\fi |
| 205 |
\ifslide |
| 206 |
\@tempcnta=#1 |
| 207 |
\@testfalse |
| 208 |
\ifnum\@tempcnta>-1 \ifnum\@tempcnta<10 \@testtrue\fi\fi |
| 209 |
\if@test |
| 210 |
\c@overlay=\@tempcnta |
| 211 |
\ifnum\c@overlay=0 |
| 212 |
\advance\c@slide by -1 |
| 213 |
\refstepcounter{slide}% |
| 214 |
\else |
| 215 |
\advance\c@overlay by -1 |
| 216 |
\refstepcounter{overlay}% |
| 217 |
\ifoverlays |
| 218 |
\xdef\overlay@list{\overlay@list,\the\c@overlay}% |
| 219 |
\fi |
| 220 |
\fi |
| 221 |
\ifoverlays |
| 222 |
\@overlay{\the\c@overlay}% |
| 223 |
\fi |
| 224 |
\else |
| 225 |
\@seminarerr{\string\overlay\space argument must be |
| 226 |
an integer between 0 and 9}\@eha |
| 227 |
\fi |
| 228 |
\else |
| 229 |
\@seminarerr{\string\overlay\space can only be used |
| 230 |
in slide environments}\@eha |
| 231 |
\fi |
| 232 |
\ignorespaces} |
| 233 |
% \end{macrocode} |
| 234 |
% \end{macro} |
| 235 |
% |
| 236 |
% \begin{macro}{\colorlayers} |
| 237 |
% Color layers use the same mechanism as overlays; only the interface differs. |
| 238 |
% \begin{macrocode} |
| 239 |
\def\colorlayers#1{% |
| 240 |
\edef\@tempc{#1}% |
| 241 |
\edef\layer@list{\layer@list,#1}% |
| 242 |
\def\@tempa##1{% |
| 243 |
\@namedef{##1}{% |
| 244 |
\iflayers\ifx\@overlay\relax\nooverlays@err\fi\fi |
| 245 |
\ifslide |
| 246 |
\iflayers |
| 247 |
\xdef\overlay@list{\overlay@list,\the\c@overlay-##1}% |
| 248 |
\@overlay{\the\c@overlay-##1}% |
| 249 |
\fi |
| 250 |
\else |
| 251 |
\@seminarerr{Color layer `##1' can only be used in |
| 252 |
slide environments}\@eha |
| 253 |
\fi}} |
| 254 |
\@for\@tempb:=\@tempc\do{% |
| 255 |
\expandafter\@tempa\expandafter{\@tempb}}} |
| 256 |
\def\layer@list{} |
| 257 |
% \end{macrocode} |
| 258 |
% \end{macro} |
| 259 |
% |
| 260 |
% |
| 261 |
% \begin{macro}{\layerpagestyle,\overlaypagestyle} |
| 262 |
% \begin{macrocode} |
| 263 |
\def\overlaypagestyle#1{\@ifgoodps{#1}{\edef\overlay@pagestyle{#1}}} |
| 264 |
\def\layerpagestyle#1{\@ifgoodps{#1}{\edef\layer@pagestyle{#1}}} |
| 265 |
\overlaypagestyle{} |
| 266 |
\layerpagestyle{} |
| 267 |
% \end{macrocode} |
| 268 |
% \end{macro} |
| 269 |
% |
| 270 |
\endinput |
| 271 |
% END semlayer.doc |