Debian Codegraph @

texmf-dist/doc/latex/seminar/seminar.doc

raw
1 % BEGIN seminar.doc
2 %%
3 \def\fileversion{1.0}
4 \def\filedate{93/04/01}
5 %%
6 %% LaTeX document style `seminar', for use with LaTeX v2.09.
7 %% This is a style for typesetting notes and slides.
8 %%
9 %% COPYRIGHT 1993, by Timothy Van Zandt, [email protected]
10 %%
11 %%
12 %% This file may be distributed and/or modified under the conditions of
13 %% the LaTeX Project Public License, either version 1.2 of this license
14 %% or (at your option) any later version. The latest version of this
15 %% license is in:
16 %%
17 %% http://www.latex-project.org/lppl.txt
18 %%
19 %% and version 1.2 or later is part of all distributions of LaTeX version
20 %% 1999/12/01 or later.
21 %%
22 %%
23 % **************************************************************************
24 % This is `seminar.doc', the documented code for `seminar.sty'.
25 % You can copy this to `seminar.sty' and use it as is.
26 % You can also create a stripped input file `seminar.sty' using sem-make.tex.
27 % You can print the documented code using sem-code.tex.
28 % sem-make.tex and sem-code.tex are distributed with seminar.sty.
29 % **************************************************************************
30 %
31 % \EndDocPreamble
32 %
33 % \CheckSum{3062}
34 % \CharacterTable
35 % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
36 % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
37 % Digits \0\1\2\3\4\5\6\7\8\9
38 % Exclamation \! Double quote \" Hash (number) \#
39 % Dollar \$ Percent \% Ampersand \&
40 % Acute accent \' Left paren \( Right paren \)
41 % Asterisk \* Plus \+ Comma \,
42 % Minus \- Point \. Solidus \/
43 % Colon \: Semicolon \; Less than \<
44 % Equals \= Greater than \> Question mark \?
45 % Commercial at \@ Left bracket \[ Backslash \\
46 % Right bracket \] Circumflex \^ Underscore \_
47 % Grave accent \` Left brace \{ Vertical bar \|
48 % Right brace \} Tilde \~}
49 %
50 %
51 % \section{Overview}
52 %
53 % In principle, a slides style is a simple matter; just a question of
54 % resetting the magnification and changing a few page parameters. However,
55 % allowing notes and slides to be put in the same file but treated
56 % differently, and allowing everything to be printed in various formats,
57 % complicates things a bit.
58 %
59 % The code starts by checking that the file is not loaded, and announcing the
60 % file on the terminal.
61 % \begin{macrocode}
62 \@ifundefined{@seminarerr}{}{\endinput}
63 \typeout{%
64 Document Style: `seminar' v\fileversion \space <\filedate> (tvz)}
65 % \end{macrocode}
66 %
67 %
68 % \section{Useful hacks}
69 %
70 % \begin{macro}{\test@member}
71 % The second argument to "\test@member" is a comma-separated list.
72 % "\test@member" checks whether the first argument is a member of this list
73 % (after expanding both the list and the first argument), setting "\if@test"
74 % appropriately.
75 % \begin{macrocode}
76 \def\test@member#1#2{%
77 \edef\@tempg{,#2,#1,}%
78 \edef\@temph{####1,#1,}%
79 \expandafter\def\expandafter\@temph\@temph##2\@nil{%
80 \def\@tempg{##2}%
81 \ifx\@tempg\@empty\@testfalse\else\@testtrue\fi}%
82 \expandafter\@temph\@tempg\@nil}
83 % \end{macrocode}
84 % \end{macro}
85 %
86 % \begin{macro}{\addto@hook}
87 % The first argument of "\addto@hook" is a token register. "\addto@hook" adds
88 % its second argument to this register. This is a standard macro in the Mainz
89 % distribution,.
90 % \begin{macrocode}
91 \def\addto@hook#1#2{#1\expandafter{\the#1#2}}
92 % \end{macrocode}
93 % \end{macro}
94 %
95 % \begin{macro}{\reset@font}
96 % "\reset@font" is part of later releases of \LaTeX.
97 % \begin{macrocode}
98 \@ifundefined{reset@font}{\def\reset@font{\normalsize\rm}}{}
99 % \end{macrocode}
100 % \end{macro}
101 %
102 % \begin{macro}{\@seminarerr}
103 % "\@seminarerr" is analogous to "\@latexerr".
104 % \begin{macrocode}
105 \def\@seminarerr#1#2{%
106 \edef\@tempc{#2}\expandafter\errhelp\expandafter{\@tempc}%
107 \typeout{^^JSeminar.sty error.\space\space\space
108 Type \space H <return> \space for immediate help.^^J}%
109 \errmessage{#1^^J}}
110 % \end{macrocode}
111 % \end{macro}
112 %
113 % \begin{macro}{\notslide@err}
114 % \begin{macrocode}
115 \def\notslide@err#1{Cannot use \string#1 in slide environments}
116 % \end{macrocode}
117 % \end{macro}
118 %
119 % \begin{macro}{\new@slidebox}
120 % Since "\newbox" is "\outer".
121 % \begin{macrocode}
122 \def\new@slidebox{\alloc@4\box\chardef\insc@unt}
123 % \end{macrocode}
124 % \end{macro}
125 %
126 % \begin{macro}{\slidewidth,\slideheight}
127 % \begin{macrocode}
128 \newdimen\slidewidth \slidewidth 8.5in
129 \newdimen\slideheight \slideheight 6.3in
130 % \end{macrocode}
131 % \end{macro}
132 %
133 % \begin{macro}{\paperwidth,\paperheight}
134 % "\paperwidth" and "\paperheight" are used by "sem-page.sty" to set the page
135 % parameters. "\twoup" also uses the values.
136 % \begin{macrocode}
137 \@ifundefined{paperwidth}{\def\paperwidth{8.5in}}{}
138 \@ifundefined{paperheight}{\def\paperheight{11in}}{}
139 % \end{macrocode}
140 % \end{macro}
141 %
142 % \begin{macro}{\addto@preamblecmds}
143 % Various commands used in this style are added to "\@preamblecmds". This
144 % macros makes it easier to do this as we go along. Argument is a list of
145 % commands separated by "\do".
146 % \begin{macrocode}
147 \def\addto@preamblecmds#1{%
148 \begingroup
149 \def\do{\noexpand\do\noexpand}%
150 \xdef\@preamblecmds{\@preamblecmds\do#1}%
151 \endgroup}
152 \addto@preamblecmds{\addto@preamblecmds\do\@preamblecmds}
153 % \end{macrocode}
154 % \end{macro}
155 %
156 %
157 % \section{Auxilary files and style options}
158 %
159 % The formats and selections are specified using style options, but these do
160 % not correspond to independent files.
161 % It is possible to set the flags before inputting "seminar.sty".
162 % \begin{macrocode}
163 \def\sem@temp#1{\@ifundefined{if#1}%
164 {\def\@tempa{\csname newif\endcsname}
165 \expandafter\@tempa\csname if#1\endcsname}{}}
166 \sem@temp{article}{}
167 \sem@temp{slidesonly}{}
168 \sem@temp{notes}{}
169 \sem@temp{notesonly}{}
170 \sem@temp{notesonlystar}{}
171 \sem@temp{portrait}{}
172 \def\ds@article{\articletrue}
173 \def\ds@slidesonly{\slidesonlytrue\notesfalse\notesonlyfalse}
174 \def\ds@notes{\notestrue\slidesonlyfalse\notesonlyfalse}
175 \def\ds@notesonly{\notesonlytrue\slidesonlyfalse\notesfalse}
176 \@namedef{ds@notesonly*}{\ds@notesonly\notesonlystartrue}
177 \def\ds@portrait{\portraittrue}
178 \@namedef{ds@a4}{%
179 \def\paperwidth{210mm}
180 \def\paperheight{297mm}
181 \slidewidth 222mm
182 \slideheight 152mm\relax}
183 % \end{macrocode}
184 % This style is based in part on the \LaTeX{} "article" style, which we now
185 % input. "article.sty" takes care of executing the options.
186 % \begin{macrocode}
187 \@@input article.sty
188 \ifnotesonly\else\notesonlystarfalse\fi
189 \@@input sem-page.sty
190 % \end{macrocode}
191 %
192 % \section{Document hooks}
193 %
194 % \begin{macro}{\document}
195 % "\document" is redefined to incorporate hooks, in the following order:
196 % \begin{LVerbatim}
197 % \endgroup
198 % \the\before@document
199 % \begingroup
200 % \document
201 % \the\after@document
202 % \xcomment@hook
203 % \end{LVerbatim}
204 % "\before@document" and "\after@document" are token registers that can be
205 % added to using "\addto@hook". These will be used for things like invoking
206 % "\landscape". "\xcomment@hook" is a command sequence that will be used to
207 % invoke the "xcomment" macros for commenting out the notes in the
208 % "slidesonly" selection.
209 %
210 % Messing with the definition of "\document" creates potential conflicts with
211 % other optional style files that do the same. However, we add these commands
212 % in a very friendly way: (i) it shouldn't cause problems even if "\document"
213 % does not have its standard definition, and (ii) if some other macros
214 % subsequently change the definition of "\document" in the same way,
215 % "seminar.sty" should not break. Styles designed specifically for use with
216 % "seminar.sty" should use "\before@document" and "\after@document" to add
217 % their own modifications to the "\document" command. \codelabel{document}
218 %
219 % In the code below, "\before@document" and "\after@document" are used as
220 % temporary token registers during the modification of "\document".
221 % \begin{macrocode}
222 \newtoks\before@document
223 \newtoks\after@document
224 \let\xcomment@hook\relax
225 \before@document{\endgroup\the\before@document\begingroup}
226 \after@document{\the\after@document\xcomment@hook}
227 \expandafter\@temptokena\expandafter{\document}
228 \edef\document{\the\before@document\the\@temptokena\the\after@document}
229 \before@document{}
230 \after@document{}
231 % \end{macrocode}
232 % \codelabel*{document*}
233 % \end{macro}
234 %
235 % \begin{macro}{\enddocument}
236 % Now we do something similar with "\end@document", adding the token register
237 % "\before@enddocument" to the beginning of the definition of "\enddocument".
238 % This might be used, for example, to warn the user to print in landscape
239 % mode.
240 % \begin{macrocode}
241 \newtoks\before@enddocument
242 \before@enddocument{\the\before@enddocument}
243 \expandafter\@temptokena\expandafter{\enddocument}
244 \edef\enddocument{\the\before@enddocument\the\@temptokena}
245 \before@enddocument{}
246 % \end{macrocode}
247 % \end{macro}
248 %
249 % \begin{macro}{\landscape}
250 % "\printlandscape" is invoked at the beginning of landscape documents. It is
251 % defined here to warn the user to print in landscape mode.
252 % \begin{macrocode}
253 \newif\ifprintlandscape
254 \ifportrait
255 \ifarticle\printlandscapetrue\fi
256 \else
257 \ifarticle\else\printlandscapetrue\fi
258 \fi
259 \addto@hook\before@document{\ifprintlandscape\printlandscape\fi}
260 \addto@preamblecmds{\printlandscape}
261 \def\printlandscape{\addto@hook\before@enddocument{%
262 \typeout{^^J%
263 *******************************************************^^J%
264 ***** !! PRINT THIS DOCUMENT IN LANDSCAPE MODE !! *****^^J%
265 *******************************************************}}}
266 % \end{macrocode}
267 % \end{macro}
268 %
269 %
270 % \section{Slide-making macros}
271 %
272 % \begin{macro}{\slide,\endslide,\slide*,\endslide*}
273 % Let's start from the outside and move in.
274 % \begin{macrocode}
275 \def\slide{%
276 \NestedSlide@Error{slide}%
277 \landscapetrue
278 \@ifnextchar[{\begin@slide}{\begin@slide[\slidewidth,\slideheight]}}
279 \def\endslide{\end@slide}
280 \@namedef{slide*}{%
281 \NestedSlide@Error{slide*}%
282 \landscapefalse
283 \@ifnextchar[{\begin@slide}{\begin@slide[\slidewidth,\slideheight]}}%
284 \@namedef{endslide*}{\end@slide}
285 % \end{macrocode}
286 % \end{macro}
287 %
288 % \begin{macro}{\theslide}
289 % "slide" is the counter for slides. "slide@count" keeps track of the number
290 % of slides in the current slide environment.
291 % \begin{macrocode}
292 \newcounter{slide}
293 \def\theslide{\arabic{slide}}
294 \newcount\slide@count
295 % \end{macrocode}
296 % \end{macro}
297 %
298 % \begin{macro}{\@slidebox}
299 % Each slide is stored in the box "\@slidebox". The current page of notes
300 % might be saved in "\not@slidebox".
301 % \begin{macrocode}
302 \newbox\@slidebox
303 \newbox\not@slidebox
304 % \end{macrocode}
305 % \end{macro}
306 %
307 % \begin{macro}{\ifslide,\iflandscape}
308 % "\ifslide" is true in any slide environment. This allows commands to be
309 % active only in slide environments (important for overlays, for example).
310 % "\iflandscape" is true for landscape slides, and false for portrait slides.
311 % This allows embellishments to customize their behavior, although it is not
312 % actually used by any of the macros defined in "seminar.sty".
313 % \begin{macrocode}
314 \newif\ifslide
315 \newif\iflandscape
316 % \end{macrocode}
317 % \end{macro}
318 %
319 % \begin{macro}{\@landscapeonly,\landscapeonly,\portraitonly}
320 % "\@landscapeonly" is defined to be "1" if only landscape slides should be
321 % printed, "-1" if only portrait slides should be printed, and "0" if both
322 % orientations should be printed.
323 % \begin{macrocode}
324 \def\@landscapeonly{0}
325 \def\landscapeonly{\def\@landscapeonly{1}}
326 \def\portraitonly{\def\@landscapeonly{-1}}
327 % \end{macrocode}
328 % \end{macro}
329 %
330 % \begin{macro}{\NestedSlide@Error}
331 % We will check for nested slide environments, and attempt to recover the best
332 % we can. Otherwise, forgetting the end of a slide environment could cause
333 % \TeX{} to procede to the end of the document without generating any input,
334 % and then give unlightening error messages.
335 % \begin{macrocode}
336 \def\NestedSlide@Error#1{%
337 \ifslide
338 \endgroup
339 \@seminarerr{Nested slide environments. Perhaps missing
340 \string\end{\@currenvir}. May be fatal}\@ehd
341 \expandafter\end\expandafter{\@currenvir}%
342 \ifslide\expandafter\end\expandafter{\@currenvir}\fi
343 \begingroup
344 \def\@currenvir{#1}%
345 \fi}
346 % \end{macrocode}
347 % \end{macro}
348 %
349 % \begin{macro}{\begin@slide}
350 % This is the meat of "\slide" and "\slide*".
351 % \begin{macrocode}
352 \def\begin@slide[#1,#2]{%
353 \slide@clearpage
354 \setlength\slidewidth{#1}%
355 \setlength\slideheight{#2}%
356 % \end{macrocode}
357 % The current contents of the page is saved in "\not@slidebox", and then the
358 % output routine is set to "\slide@output".
359 % \begin{macrocode}
360 \begingroup
361 \ifarticle
362 \output{%
363 \advance\count@ 1
364 \global\setbox\not@slidebox\box\@cclv}%
365 \par\@@par\penalty-\@M
366 \fi
367 \output{\slide@output}%
368 % \end{macrocode}
369 % The flag "\ifslide" is set, and the counter "\slide@count", which keeps
370 % track of the number of slides in the current slide environment, is
371 % initialized.
372 % \begin{macrocode}
373 \slidetrue
374 \ifarticle\global\slide@count=\z@\fi
375 \refstepcounter{slide}%
376 \ifnotesonlystar\xdef\first@slidemarker{\the\c@slide}\fi
377 \def\do##1{\setcounter{##1}\z@}\slide@reset
378 % \end{macrocode}
379 % Save current "\textheight" and "\textwidth", to be used later by the output
380 % routine in the "slides" format.
381 % \begin{macrocode}
382 \ifarticle\else
383 \edef\page@textheight{\number\textheight sp}%
384 \edef\page@textwidth{\number\textwidth sp}%
385 \fi
386 \set@slidesize
387 % \end{macrocode}
388 % Now we finish customizing the slide environment.
389 % \begin{macrocode}
390 \slidebox@restore
391 \the\slide@hook
392 \the\before@newslide
393 \everyslide}
394 % \end{macrocode}
395 % \end{macro}
396 %
397 % \begin{macro}{\end@slide}
398 % This is "\endslide" and "\endslide*". We first make sure that there are
399 % balanced groups so that the normal output routine is restored.
400 % \begin{macrocode}
401 \def\end@slide{%
402 \par\penalty-\@M
403 \xdef\@tempg{\@currenvir}%
404 \endgroup
405 \ifslide
406 \@seminarerr{Perhaps missing `\string\end{\@tempg}',
407 \iffalse{\fi`\string}' or `\string\endgroup'}\@ehd
408 \def\next{\endgroup\ifslide\expandafter\next\fi}%
409 \next
410 \fi
411 % \end{macrocode}
412 % If there is anything on the page, it was inserted with "\aftergroup" and
413 % should be discarded. (This can happen with color commands, for example.)
414 % \begin{macrocode}
415 \begingroup
416 \output{\setbox\@tempboxa\box\@cclv}%
417 \@@par\penalty-\@M
418 \endgroup
419 % \end{macrocode}
420 % The slide counter was stepped when the last slide was output. Now we need to
421 % set it back one. With the "article" format, we now have to output all the
422 % acculumulated slides.
423 % \begin{macrocode}
424 \global\advance\c@slide-1
425 \def\do##1{\setcounter{##1}{\@nameuse{saved@c@##1}}}%
426 \slide@reset
427 \ifarticle\outputloop@savedslides\fi
428 \the\after@slide}
429 % \end{macrocode}
430 % \end{macro}
431 %
432 % \begin{macro}{\slideclearpagetrue,\slideclearpagefalse,\slide@clearpage}
433 % \begin{macrocode}
434 \let\slideclearpagetrue\relax
435 \let\slideclearpagefalse\relax
436 \ifarticle
437 \def\slide@clearpage{\par\penalty\z@}
438 \ifnotes
439 \def\slideclearpagetrue{\def\slide@clearpage{\clearpage}}
440 \def\slideclearpagefalse{\def\slide@clearpage{\par\penalty\z@}}
441 \else
442 \ifnotesonly
443 \def\slideclearpagetrue{\def\slide@clearpage{\clearpage}}
444 \def\slideclearpagefalse{\def\slide@clearpage{\par\penalty\z@}}
445 \fi
446 \fi
447 \else
448 \def\slide@clearpage{\clearpage}
449 \fi
450 % \end{macrocode}
451 % \end{macro}
452 %
453 % \begin{macro}{\slide@hook,\everyslide,\after@slide}
454 % "\slide@hook" and "\everyslide" are hooks for modifying the slide
455 % environments. "\slide@hook" is a token register. Commands can be added to it
456 % without destroying previously added commands using the "\addto@hook"
457 % command.
458 % "\everyslide" is an ordinary command sequence to be used by users.
459 % "\after@slide" can be used to initialize things for notes.
460 % \begin{macrocode}
461 \newtoks\slide@hook
462 \def\everyslide{}
463 \newtoks\after@slide
464 % \end{macrocode}
465 % \end{macro}
466 %
467 %
468 % \section{$\setminus$slidebox@restore\label{everyslide}}
469 %
470 % \begin{macro}{\slidebox@restore}
471 % "\slidebox@restore" sets up the spacing parameters at the beginning of every
472 % slide. The component commands are defined following this macro.
473 % \begin{macrocode}
474 \def\slidebox@restore{%
475 \def\thepage{\theslide}%
476 \def\newpage{\newslide}%
477 \def\clearpage{\newslide}%
478 \def\thispagestyle{\notslide@err{\thispagestyle}}%
479 \pagestyle{\slide@pagestyle}%
480 \@twocolumnfalse
481 \def\twocolumn{\notslide@err{\twocolumn}}%
482 \def\onecolumn{\notslide@err{\onecolumn}}%
483 \def\marginpar{\notslide@err{\marginpar}}%
484 \def\thanks{\slidethanks}%
485 \def\maketitle{\slidemaketitle}%
486 \fix@floats
487 \fix@whatsits
488 \slide@footnotes
489 \def\do##1{\expandafter\xdef\csname
490 saved@c@##1\endcsname{\the\@nameuse{c@##1}}}%
491 \slide@reset
492 \topskip\z@ \maxdepth\z@
493 \slide@listparameters
494 \slidefonts
495 \def\baselinestretch{\slidestretch}%
496 \def\arraystretch{\slidearraystretch}%
497 \sem@ptsize{\slide@ptsize}}
498 % \end{macrocode}
499 % \end{macro}
500 %
501 % \begin{macro}{\thedate,\theauthor,\thetitle,\thethanks}
502 % The "\date", "\author" and "\title" commands are redefined so that they save
503 % their information in accessible command sequences, "\thedate", "\theauthor"
504 % and "\thetitle". "\thanks" is saved so that it can be restored during slide
505 % environments. "\thethanks" is set to "\@thanks" so that it is easier to
506 % redefine "\slidemaketitle" in the preamble.
507 % \begin{macrocode}
508 \def\date#1{\gdef\@date{#1}\gdef\thedate{#1}}
509 \def\author#1{\gdef\@author{#1}\gdef\theauthor{#1}}
510 \def\title#1{\gdef\@title{#1}\gdef\thetitle{#1}}
511 \date{\today}
512 \let\slidethanks\thanks
513 \def\thethanks{\@thanks}%
514 % \end{macrocode}
515 % \end{macro}
516 %
517 % \begin{macro}{\slidemaketitle}
518 % \begin{macrocode}
519 \def\slidemaketitle{%
520 \par
521 \begin{center}\bf
522 {\large \thetitle}\par\vskip 1ex
523 \begin{tabular}[t]{c} \theauthor \end{tabular}\par\vskip 1ex
524 \thedate
525 \end{center}%
526 \thethanks\par}
527 % \end{macrocode}
528 % \end{macro}
529 %
530 % \begin{macro}{\fix@floats}
531 % Floats are neutralized, but the captions work as usual. This makes it easier
532 % to just transfer a float from some other document to a slide. This only
533 % works if end of floating environment is "\def"ined to be "\end@float",
534 % rather than "\let" to be "\end@float", or if "\@float{foo}" is ended by
535 % "\endfoo". This should get 99\% of the cases.
536 % \begin{macrocode}
537 \def\fix@floats{%
538 \def\@xfloat##1[##2]{%
539 \expandafter\let\csname end##1\endcsname\end@float
540 \par\medskip\vbox\bgroup\def\@captype{##1}\parindent\z@
541 \ignorespaces}%
542 \def\end@float{\par\vskip\z@\egroup\medskip}%
543 \def\@dblfloat{\@float}\def\end@dblfloat{\end@float}%
544 \def\endfigure{\end@float}\def\endtable{\end@float}}
545 % \end{macrocode}
546 % \end{macro}
547 %
548 % \begin{macro}{\fix@whatsits}
549 % The whatsits "\write", "\openout" and "\closeout" are problematic in slides
550 % for two reasons:
551 % \begin{enumerate}
552 % \item First, an otherwise empty vertical list with a whatsit is not empty.
553 % Thus, if a slide begins with a "\write" command, followed by a line a text,
554 % "\parskip" is inserted before the text. This can be quite noticable in a
555 % slide environment, since by default "\parskip" is about 2.5\% of the height
556 % of a slide. This problem is likely to arise because it is convenient to put
557 % a slide's "\label" command first.
558 % \item Second, the slides are omitted in the "notesonly" selection, but we
559 % want to preserve cross-referencing.
560 % \end{enumerate}
561 % We solve both problems by making the three whatsits mentioned above
562 % "\immediate" within the slide environments. This might cause unforeseen
563 % problems for some macros. It also introduces a known problem: slide
564 % cross-references may not be accurate if \TeX\ is doing the page breaking
565 % automatically.
566 % \begin{macrocode}
567 \let\normal@write\write
568 \let\normal@read\read
569 \let\normal@openout\openout
570 \let\normal@closeout\closeout
571 \def\fix@whatsits{%
572 \def\write{\immediate\normal@write}%
573 \def\read{\immediate\normal@read}%
574 \def\openout{\immediate\normal@openout}%
575 \def\closeout{\immediate\normal@closeout}}
576 % \end{macrocode}
577 % \end{macro}
578 %
579 % \begin{macro}{\slide@footins,\theslidefootnote,\slide@footnotes}
580 % We want to set up a parallel footnote system for slides. It acts just like
581 % regular footnotes, but
582 % \begin{LVerbatim}
583 % \interfootnotelinepenalty\@M
584 % \end{LVerbatim}
585 % means that footnotes will not be split across pages.
586 % \begin{macrocode}
587 \newinsert\slide@footins
588 \skip\slide@footins=\bigskipamount
589 \count\slide@footins=1000
590 \dimen\slide@footins=4in
591 \def\theslidefootnote{\alph{footnote}}
592 \def\slide@footnotes{%
593 \def\thefootnote{\theslidefootnote}%
594 \let\footins\slide@footins
595 \interfootnotelinepenalty\@M}
596 % \end{macrocode}
597 % \end{macro}
598 %
599 % \begin{macro}{\slidefonts,\ifslidefonts}
600 % "\slidefonts" should set up any special fonts for the slides.
601 % \begin{macrocode}
602 \def\slidefonts{}
603 % \end{macrocode}
604 % \end{macro}
605 %
606 % \begin{macro}{\slidestretch,\slidearraystretch}
607 % \begin{macrocode}
608 \def\slidestretch{1.18}
609 \def\slidearraystretch{1.2}
610 % \end{macrocode}
611 % \end{macro}
612 %
613 % \begin{macro}{\raggedslides}
614 % "\ragggedslides[0pt]" means justified, "\raggedslides[1fil]" means
615 % "\raggedright". Ideally, we would also like a version that breaks lines the
616 % same way as with justified text, but then doesn't stretch any glue to
617 % justify the margin. This is impossible, but "\raggedslides[1em]", e.g., is
618 % meant to be an intermediate case.
619 % \begin{macrocode}
620 \def\raggedslides{\@ifnextchar[{\@raggedslides}{\@raggedslides[1fil]}}
621 \def\@raggedslides[#1]{%
622 \edef\slide@@rightskip{#1}%
623 \ifslide\slide@rightskip\fi}
624 \def\slide@rightskip{%
625 \@rightskip\z@ plus \slide@@rightskip\relax \rightskip\@rightskip}
626 \def\slide@@rightskip{1fil}
627 % \end{macrocode}
628 % \end{macro}
629 %
630 %
631 % \begin{macro}{\slide@listparameters}
632 % The list parameters are generally tightened up, compared to the usual
633 % spacing in "article.sty", to compensate for the large "\parskip" and
634 % "\baselinestretch".
635 % \begin{macrocode}
636 \newcount\slide@listdepth
637 \def\slide@listparameters{%
638 \let\@listdepth\slide@listdepth
639 \slide@listdepth\z@
640 \def\@listi{\slide@listi}%
641 \def\@listii{\slide@listii}%
642 \def\@listiii{\slide@listiii}%
643 \let\@listiv\relax\let\@listv\relax\let\@listvi\relax}
644 \def\slide@listi{%
645 \leftmargin\leftmargini
646 \labelwidth\leftmargini \advance\labelwidth-\labelsep
647 \parsep\parskip \divide\parsep2
648 \partopsep\slidepartopsep\relax
649 \advance\partopsep-\parskip
650 \ifdim\partopsep<\z@\partopsep\z@\fi
651 \itemsep\slideitemsep\relax
652 \ifdim\parsep<\itemsep
653 \topsep\itemsep \advance\topsep-\parsep
654 \else
655 \itemsep\parsep \topsep\z@
656 \fi}
657 \def\slide@listii{%
658 \leftmargin\leftmarginii
659 \labelwidth\leftmarginii \advance\labelwidth-\labelsep
660 \divide\itemsep2 \divide\parsep2
661 \divide\topsep2 \divide\partopsep2\relax}%
662 \def\slide@listiii{%
663 \leftmargin\leftmarginiii
664 \labelwidth\leftmarginiii \advance\labelwidth-\labelsep
665 \itemsep \z@ \parsep\z@ \topsep\z@}%
666 \def\slideleftmargini{1.8em}
667 \def\slideleftmarginii{1.4em}
668 \def\slideleftmarginiii{1em}
669 \def\slidelabelsep{.5em}
670 \def\slideitemsep{.8ex minus .2ex}
671 \def\slidepartopsep{1ex minus .2ex}
672 % \end{macrocode}
673 % \codelabel{defaultpar*}%
674 % \end{macro}
675 %
676 % \section{Slide output routines: $\setminus$output}
677 %
678 % \begin{macro}{\save@slidespecials}
679 % First, a trick to make sure that "\special"'s in the preamble end up on the
680 % first page of the document, even if the first slide is omitted, or if the
681 % first item in the document is a float (in which case \LaTeX\ discards
682 % "\special"'s). "\@textop" is used to insert the specials if the first page
683 % is processed by \LaTeX's usual output routines, and "\insert@specials" is
684 % used to insert the specials if the first page is a slide in the "slides"
685 % format (see the definition of "\output@slide" below).
686 % \begin{macrocode}
687 \newbox\saved@specials
688 \def\save@slidespecials{%
689 \begingroup
690 \output{%
691 \global\setbox\saved@specials=\box\@cclv
692 \global\wd\saved@specials=\z@
693 \global\dp\saved@specials=\z@
694 \global\ht\saved@specials=\z@}%
695 \hbox{}\penalty-\@M
696 \global\let\saved@texttop\@texttop
697 \gdef\@texttop{%
698 \ifvoid\saved@specials\else\box\saved@specials\nointerlineskip\fi
699 \saved@texttop
700 \global\let\@texttop\saved@texttop}%
701 \endgroup}
702 \addto@hook\after@document{\save@slidespecials}
703 \ifarticle\else
704 \def\insert@specials{%
705 \ifvoid\saved@specials\else
706 \setbox\@slidebox\hbox{\box\saved@specials\box\@slidebox}%
707 \fi
708 \global\let\insert@specials\relax}
709 \fi
710 % \end{macrocode}
711 % \end{macro}
712 %
713 % \begin{macro}{\extraslideheight}
714 % This increases the height of a slide for the purpose of page-breaking. We
715 % use unscaled dimensions so that \TeX's warnings about overfull "\vbox"'s
716 % will be comparable.
717 % \begin{macrocode}
718 \def\extraslideheight#1{%
719 \@tempdima #1\relax
720 \edef\X@SlideHeight{\number\@tempdima sp}
721 \ifslide\set@slidesize\fi}
722 \extraslideheight{6pt}
723 % \end{macrocode}
724 % \end{macro}
725 %
726 % \begin{macro}{\set@slidesize}
727 % In addition to setting "\hsize" and "\vsize", this sets the \LaTeX\
728 % parameters such as "\textheight" and "\textwidth" so that slides seem like a
729 % regular page, whatever format is being used.
730 % \begin{macrocode}
731 \def\set@slidesize{%
732 \iflandscape
733 \hsize=\inverseslidesmag\slidewidth
734 \vsize=\inverseslidesmag\slideheight
735 \else
736 \hsize=\inverseslidesmag\slideheight
737 \vsize=\inverseslidesmag\slidewidth
738 \fi
739 \edef\slide@vsize{\number\vsize sp}%
740 \textheight\vsize
741 \advance\vsize\X@SlideHeight\relax
742 \textwidth\hsize\columnwidth\hsize\linewidth\hsize}
743 % \end{macrocode}
744 % \end{macro}
745 %
746 % \begin{macro}{\newslide}
747 % This includes things you want to initialize whenever a new page is started
748 % \begin{macrocode}
749 \def\newslide{%
750 \par\penalty-\@M
751 \def\do##1{\setcounter{##1}\z@}\slide@reset
752 \the\before@newslide
753 \set@slidesize}
754 \newtoks\before@newslide
755 % \end{macrocode}
756 % \end{macro}
757 %
758 % \begin{macro}{\slidereset,\addtoslidereset}
759 % "\addto@slidereset{foo,bar}" sets "\slide@reset" to
760 % \begin{quote}
761 % "\slide@reset\do{foo}\do{bar}"
762 % \end{quote}
763 % \begin{macrocode}
764 \def\slide@reset{\do{footnote}}
765 \def\slidereset#1{\def\slide@reset{}\addtoslidereset{#1}}
766 \def\addtoslidereset#1{%
767 \edef\@tempa{#1}\expandafter\addto@slidereset\@tempa,\@nil,}
768 \def\addto@slidereset#1,{%
769 \ifx\@nil#1\else
770 \@ifundefined{c@#1}%
771 {\@seminarerr{Counter `#1' not defined}\@ehd}%
772 {\expandafter\def\expandafter\slide@reset\expandafter{%
773 \slide@reset\do{#1}}}%
774 \expandafter\addto@slidereset
775 \fi}
776 % \end{macrocode}
777 % \end{macro}
778 %
779 % \begin{macro}{\slide@output}
780 % "\os@test" checks whether according to some "\onlyslides" or "\notslides"
781 % command, this slide should not be output; "\os@test" is defined in Section
782 % \ref{os}.
783 % \begin{macrocode}
784 \def\slide@output{%
785 \@makeslide
786 \@testfalse
787 \ifnotesonly\else
788 \iflandscape
789 \ifnum\@landscapeonly>-1 \os@test\fi
790 \else
791 \ifnum\@landscapeonly<1 \os@test\fi
792 \fi
793 \fi
794 \if@test
795 \reset@slideoutput
796 \@@makeslide
797 \process@slide
798 \fi
799 \refstepcounter{slide}}
800 % \end{macrocode}
801 % \end{macro}
802 %
803 % \begin{macro}{\reset@slideoutput}
804 % Some things should be reset for the slide embellishments. E.g., you don't
805 % want slide labels or headers and footers to be affected by the current font.
806 % \begin{macrocode}
807 \def\reset@slideoutput{%
808 \let\par\@@par
809 \reset@font
810 \def\baselinestretch{1}%
811 \@nameuse{1\@ptsize @semptsize}%
812 \catcode`\ =10
813 \let\-\@dischyph \let\'\@acci \let\`\@accii \let\=\@acciii}
814 % \end{macrocode}
815 % \end{macro}
816 %
817 % \begin{macro}{\ifcenterslides}
818 % This is the flag for vertically centering slides.
819 % \begin{macrocode}
820 \newif\ifcenterslides
821 \centerslidestrue
822 % \end{macrocode}
823 % \end{macro}
824 %
825 % \begin{macro}{\@makeslide,\@@makeslide}
826 % Take care of footnotes and verticle positioning.
827 % \begin{macrocode}
828 \def\@makeslide{%
829 \setbox\@slidebox\vbox{%
830 \unvbox\@cclv
831 \ifvoid\slide@footins\else
832 \vskip\skip\slide@footins
833 \footnoterule
834 \unvbox\slide@footins
835 \fi
836 \vskip\z@}}
837 \def\@@makeslide{%
838 \overfullslide@warning
839 \setbox\@slidebox\hbox{%
840 \vfuzz=\slidefuzz\relax
841 \vbox to\slide@vsize{%
842 \ifcenterslides\vskip\z@ plus .0001fil \fi
843 \unvbox\@slidebox
844 \vskip\z@ plus .0001fil}%
845 \the\after@slidepage}%
846 \wd\@slidebox\textwidth}
847 \def\overfullslide@warning{%
848 \dimen@\ht\@slidebox
849 \advance\dimen@-\slide@vsize\relax
850 \ifdim\dimen@>\slidefuzz\relax
851 \@warning{Slide \theslide\space overfull by \the\dimen@}%
852 \fi}
853 \def\slidefuzz{2pt}
854 % \end{macrocode}
855 % \end{macro}
856 %
857 % \begin{macro}{\after@slidepage}
858 % "\after@slidepage" is executed at the end of each page of a slide
859 % environment during the slide output routine. It is meant to reset things
860 % that might have been set by "\special"'s within the slide.
861 % \begin{macrocode}
862 \newtoks\after@slidepage
863 % \end{macrocode}
864 % \end{macro}
865 %
866 %
867 % \section{Rotation}
868 %
869 % Rotation macros must be implemented by "\special"'s, such as in
870 % "semcolor.sty". The interface for rotation is built into "seminar.sty",
871 % however.
872 %
873 % \begin{macro}{\ifrotateheaders}
874 % In the "slides" format, the slides can either be rotated before being placed
875 % on the page, or the whole page can be rotated, including headers.
876 % "\ifrotateheaders" controls which procedure is used.
877 % \begin{macrocode}
878 \newif\ifrotateheaders
879 % \end{macrocode}
880 % \end{macro}
881 %
882 % \begin{macro}{\sliderotation}
883 % \begin{macrocode}
884 \def\sliderotation#1{\@ifundefined{semsr@#1}%
885 {\@latexerr{Slide rotation `#1' not defined.}\@eha}%
886 {\@nameuse{semsr@#1}}}
887 % \end{macrocode}
888 % \end{macro}
889 %
890 % \begin{macro}{\semsr@none,\semsr@left,\semsr@right}
891 % A slide rotation should define "\rotate@slide" to rotate "\@slidebox"..
892 % \begin{macrocode}
893 \def\semsr@left{%
894 \def\rotate@slide{%
895 \setbox\@slidebox\hbox{\leftsliderotation{\box\@slidebox}}}}
896 \def\semsr@right{%
897 \def\rotate@slide{%
898 \setbox\@slidebox\hbox{\rightsliderotation{\box\@slidebox}}}}
899 \def\semsr@none{\let\rotate@slide\relax}
900 \sliderotation{none}
901 % \end{macrocode}
902 % \end{macro}
903 %
904 % \begin{macro}{\leftsliderotation,\rightsliderotation}
905 % \begin{macrocode}
906 \def\leftsliderotation#1{%
907 \@seminarerr{\string\leftsliderotation\space has not been defined}%
908 \@ehd}
909 \let\rightsliderotation\leftsliderotation
910 % \end{macrocode}
911 % \end{macro}
912 %
913 %
914 % \begin{macro}{\@ifrotateslide}
915 % \begin{macrocode}
916 \def\@ifrotateslide#1{%
917 \ifx\rotate@slide\relax\else
918 \iflandscape\ifportrait#1\fi\else\ifportrait\else#1\fi\fi
919 \fi}
920 % \end{macrocode}
921 % \end{macro}
922 %
923 %
924 % \section{Slide output routines: $\setminus$process@slide\label{slideoutput}}
925 %
926 % This is the version-dependent stuff, where we decide what to do with the
927 % slide.
928 %
929 % \begin{macro}{\process@slide}
930 % "\process@@slide" is kept separate because it can be redefined for doing
931 % overlays.
932 % \begin{macrocode}
933 \def\process@slide{%
934 \slideframewidth=\inverseslidesmag\slideframewidth
935 \slideframesep=\inverseslidesmag\slideframesep
936 \fboxrule\slideframewidth
937 \fboxsep\slideframesep
938 \ifarticle
939 \@ifrotateslide\rotate@slide
940 \else
941 \ifrotateheaders\else\@ifrotateslide\rotate@slide\fi
942 \fi
943 \process@@slide}
944 \def\process@@slide{\finish@slide\output@slide}
945 % \end{macrocode}
946 % \end{macro}
947 %
948 % \begin{macro}{\finish@slide}
949 % \begin{macrocode}
950 \def\finish@slide{%
951 \theslideframe
952 \add@slidelabel\slidelabel}
953 % \end{macrocode}
954 % \end{macro}
955 %
956 % \begin{macro}{\output@slide}
957 % In the "article" format, the slides are saved until the end of the slide
958 % environment.
959 % \begin{macrocode}
960 \ifarticle
961 \def\output@slide{%
962 \global\advance\slide@count1
963 \@ifundefined{slidebox@\the\slide@count}%
964 {{\globaldefs=1\expandafter
965 \new@slidebox\csname slidebox@\the\slide@count\endcsname}}{}%
966 \expandafter\global\expandafter\setbox\csname
967 slidebox@\the\slide@count\endcsname\box\@slidebox}
968 % \end{macrocode}
969 % In the "slides" format, we use a modification of \LaTeX's "\@outputpage".
970 % "\do@fancyput" is stuck in here in case "fancybox.sty" is being used.
971 % "\fancyput@flag" is initialized in case it is not
972 % \begin{macrocode}
973 \else
974 \def\output@slide{%
975 \begingroup
976 \hoffset=-\inverseslidesmag in
977 \voffset=-\inverseslidesmag in
978 \setslidelength\@tempdima{%
979 \ifportrait\paperwidth\else\paperheight\fi}
980 \setslidelength\@tempdimb{%
981 \ifportrait\paperheight\else\paperwidth\fi}
982 \ifrotateheaders
983 \@ifrotateslide{%
984 \dimen@=\@tempdima
985 \@tempdima=\@tempdimb
986 \@tempdimb=\dimen@}
987 \fi
988 % \oddsidemargin, \evensidemargin, \headheight, \footheight
989 % used for scratch:
990 \setslidelength\oddsidemargin\slideleftmargin
991 \setslidelength\evensidemargin\sliderightmargin
992 \setslidelength\headheight\slidetopmargin
993 \setslidelength\footheight\slidebottommargin
994 % Some page styles like to know \textwidth:
995 \textwidth=\@tempdima
996 \advance\textwidth-\oddsidemargin
997 \advance\textwidth-\evensidemargin
998 \setbox\@slidebox=\hbox to \@tempdima{%
999 \kern\oddsidemargin
1000 \vbox to\@tempdimb{%
1001 \ifnum\fancyput@flag>-1
1002 \hbox{\kern-\oddsidemargin\do@fancyput}%
1003 \fi
1004 \let\label\@gobble
1005 \let\index\@gobble
1006 \let\glossary\@gobble
1007 \vbox to\headheight{%
1008 \vfill
1009 \hbox{%
1010 \slideheadfont\relax\strut
1011 \hbox to\textwidth{\@oddhead}}%
1012 \kern\z@}%
1013 \vfill
1014 \hbox to\textwidth{\hss\box\@slidebox\hss}%
1015 \vfill
1016 \vbox to\footheight{%
1017 \hbox{%
1018 \slidefootfont\relax\strut
1019 \hbox to\textwidth{\@oddfoot}}%
1020 \vfill}}%
1021 \hss}%
1022 \ifrotateheaders\@ifrotateslide\rotate@slide\fi
1023 \insert@specials
1024 \shipout\box\@slidebox
1025 \endgroup
1026 \let\firstmark\botmark}
1027 \@ifundefined{fancyput@flag}{\def\fancyput@flag{-1}}{}
1028 \fi
1029 % \end{macrocode}
1030 % \end{macro}
1031 %
1032 % \begin{macro}{\output@savedslide}
1033 % Now we take care of the saved slides in the "article" format. Lots of things
1034 % can happen.
1035 % \begin{macrocode}
1036 \newskip\slidesep
1037 \slidesep\intextsep
1038 \ifarticle
1039 \def\fps@fslide{htbp}
1040 \def\ftype@fslide{32}
1041 \def\float@savedslide{%
1042 \begingroup\@float{fslide}%
1043 \centerline{\box\@slidebox}%
1044 \end@float\endgroup}%
1045 \@namedef{float*@savedslide}{%
1046 \begingroup\@dblfloat{fslide}%
1047 \centerline{\box\@slidebox}%
1048 \end@dblfloat\endgroup}%
1049 \def\center@slide{\hbox{%
1050 \kern-\@totalleftmargin
1051 \hbox to \columnwidth{\hss\box\@slidebox\hss}}}%
1052 \def\onepercol@savedslide{%
1053 \vbox to .996\textheight{\vss\center@slide\vss}\goodbreak}%
1054 \def\twopercol@savedslide{%
1055 \[email protected]\textheight
1056 \advance\dimen@-\slidesep
1057 \ifdim\ht\@slidebox>\dimen@
1058 \onepercol@savedslide
1059 \else
1060 \vbox to .498\textheight{\vss\center@slide\vss}\goodbreak
1061 \fi}
1062 \def\here@savedslide{%
1063 \addvspace\slidesep\center@slide\addvspace\slidesep}
1064 \@namedef{here*@savedslide}{%
1065 \goodbreak \hrule \@height\z@ \nobreak \vskip\slidesep \nobreak
1066 \center@slide
1067 \nobreak \vskip\slidesep \nobreak \hrule\@height\z@ \goodbreak}
1068 \fi
1069 \ifarticle
1070 \def\slideplacement#1{\@ifundefined{#1@savedslide}%
1071 {\@seminarerr{Slide placement `#1' undefined}\@ehd}%
1072 {\expandafter\let\expandafter\output@savedslide
1073 \csname #1@savedslide\endcsname}}
1074 \else
1075 \def\slideplacement#1{}
1076 \fi
1077 \ifarticle
1078 \ifnotes
1079 \ifportrait
1080 \slideplacement{float}
1081 \else
1082 \slideplacement{float*}
1083 \fi
1084 \else
1085 \ifportrait
1086 \slideplacement{onepercol}
1087 \else
1088 \slideplacement{twopercol}
1089 \fi
1090 \fi
1091 \fi
1092 % \end{macrocode}
1093 % \end{macro}
1094 %
1095 % \begin{macro}{\outputloop@savedslides}
1096 % This is the loop that spits out each of the saved slides. We start by
1097 % reinserting whatever was on the current page when the slide environment
1098 % started.
1099 % \begin{macrocode}
1100 \ifarticle
1101 \def\outputloop@savedslides{%
1102 \global\maxdepth\@maxdepth
1103 \ifvoid\not@slidebox\else
1104 \dimen@=\dp\not@slidebox
1105 \unvbox\not@slidebox
1106 \hrule height\z@
1107 \prevdepth\dimen@
1108 \penalty\z@
1109 \fi
1110 \edef\slide@@count{\the\slide@count\relax}%
1111 \slide@count\z@
1112 \loop
1113 \ifnum\slide@count<\slide@@count
1114 \advance\slide@count1
1115 \expandafter\setbox\expandafter\@slidebox\expandafter\box
1116 \csname slidebox@\the\slide@count\endcsname
1117 \output@savedslide
1118 \repeat
1119 \ifnotesonlystar\make@slidemarker\fi}
1120 \fi
1121 % \end{macrocode}
1122 % \end{macro}
1123 %
1124 % \begin{macro}{\make@slidemarker}
1125 % \begin{macrocode}
1126 \def\make@slidemarker{%
1127 \addvspace\slidesep
1128 \moveleft\@totalleftmargin
1129 \vbox{%
1130 \hsize\columnwidth
1131 \hrule height 1pt
1132 \kern 8pt
1133 \hbox to \columnwidth{%
1134 \hss
1135 \LARGE\bf\the@slidemarker
1136 \hss}%
1137 \kern 8pt
1138 \hrule height 1pt}%
1139 \addvspace\slidesep}
1140 \def\the@slidemarker{%
1141 Slide%
1142 \ifnum\c@slide=\first@slidemarker\else
1143 s {\c@slide\first@slidemarker\relax\theslide} --\fi
1144 { }\theslide}%
1145 % \end{macrocode}
1146 % \end{macro}
1147 %
1148 %
1149 % \section{Page numbering in the {\tt slides} format}
1150 %
1151 % In the "slides" format, we let the "page" counter be stepped as usual by the
1152 % output routine, but we don't use it for anything except perhaps to keep
1153 % track of the absolute page number. Instead, we have a counter "note" to keep
1154 % track of the pages of notes, and "\thepage" is set to "\thenote" for notes
1155 % and "\theslide" for slides (and "\theoverlay" for overlays and "\thelayer"
1156 % for layers).
1157 %
1158 % \begin{macro}{\c@note}
1159 % The "note" counter has to be stepped by the output routine, and reset by the
1160 % slide environments. In the "article" format, we just make the "note" counter
1161 % the same as the "page" counter.
1162 % \begin{macrocode}
1163 \ifarticle
1164 \let\c@note\c@page
1165 \def\p@note{\p@page}
1166 \def\thenote{\thepage}
1167 \else
1168 \newcounter{note}
1169 \def\thenote{\theslide-\arabic{note}}
1170 \def\thepage{\thenote}
1171 \addto@hook\after@slide{\setcounter{note}{1}}
1172 \expandafter\def\expandafter\@outputpage\expandafter{%
1173 \@outputpage\stepcounter{note}}
1174 \fi
1175 % \end{macrocode}
1176 % \end{macro}
1177 %
1178 % Which counter should the dvi driver pay attention to when numbering the
1179 % pages in the "slides" format? This makes a difference when using the dvi
1180 % driver to select pages. If the driver numbers pages by the slide number,
1181 % then it is easier to use the driver to print selected slides.
1182 % However, this can be cumbersome when there are many pages of notes or
1183 % overlays, especially if the driver cannot pick out the $n^{th}$ occurence of
1184 % a page, because many pages will have the same page number. In this case,
1185 % keeping track of physical page numbers may be preferred. We allow both
1186 % options.
1187 %
1188 % By default, the dvi driver pays attention to the slide counter; i.e., this
1189 % counter is assigned register 0
1190 % \begin{macrocode}
1191 \ifarticle\else
1192 \let\c@page\c@slide
1193 \countdef\c@slide=0
1194 \c@slide=0
1195 \c@page=1
1196 \fi
1197 % \end{macrocode}
1198 %
1199 % \begin{macro}{\truepagenumbers}
1200 % This switches back to having the driver recognize physical page numbers.
1201 % \begin{macrocode}
1202 \ifarticle
1203 \let\truepagenumbers\relax
1204 \else
1205 \def\truepagenumbers{%
1206 \let\c@slide\c@page
1207 \countdef\c@page=0
1208 \c@page=1
1209 \c@slide=0
1210 \let\truepagenumbers\relax}
1211 \fi
1212 \addto@preamblecmds{\truepagenumbers}
1213 % \end{macrocode}
1214 % \end{macro}
1215 %
1216 %
1217 % \section{Slide frames}
1218 %
1219 % \begin{macro}{\slideframewidth,\slideframesep}
1220 % \begin{macrocode}
1221 \newdimen\slideframewidth \slideframewidth 4pt
1222 \newdimen\slideframesep \slideframesep .3in
1223 % \end{macrocode}
1224 % \end{macro}
1225 %
1226 % \begin{macro}{\newslideframe,\slideframe}
1227 % \begin{macrocode}
1228 \def\newslideframe#1{%
1229 \@ifnextchar[{\@newslideframe{#1}}{\@newslideframe{#1}[]}}
1230 \def\@newslideframe#1[#2]{%
1231 \@namedef{semsfops@#1}{#2}%
1232 \@namedef{semsf@#1}##1}
1233 \newslideframe{plain}{\fbox{#1}}
1234 % \end{macrocode}
1235 % \end{macro}
1236 %
1237 % \begin{macro}{\slideframe,\@slideframe}
1238 % \begin{macrocode}
1239 \def\slideframe{\@slideframe{slide}}
1240 \def\@slideframe#1{%
1241 \@ifstar{\@testtrue\@@slideframe{#1}}{\@testfalse\@@slideframe{#1}}}
1242 \def\@@slideframe#1{%
1243 \@ifnextchar[{\@@@slideframe{#1}}{\@@@slideframe{#1}[]}}
1244 \def\@@@slideframe#1[#2]#3{%
1245 \def\@tempa{none}%
1246 \def\@tempb{#3}%
1247 \ifx\@tempa\@tempb
1248 \@namedef{the#1frame}{\relax}%
1249 \else
1250 \ifx\@tempb\@empty
1251 \@namedef{the#1frame}{}%
1252 \else
1253 \@ifundefined{semsf@#3}%
1254 {\@seminarerr{Slide frame `#3' undefined}\@eha}%
1255 {\if@test
1256 \@@@@slideframe{#1}[#2]{#3}%
1257 \else
1258 \@namedef{the#1frame}{\setbox\@slidebox=\hbox{{%
1259 \@nameuse{semsfops@#3}#2\@nameuse{semsf@#3}{\box\@slidebox}}}}%
1260 \fi}%
1261 \fi
1262 \fi}
1263 \def\@@@@slideframe#1[#2]#3{%
1264 \expandafter\let\expandafter\@tempa\csname the#1frame\endcsname
1265 \edef\next{%
1266 \noexpand\def\expandafter\noexpand\csname the#1frame\endcsname}%
1267 \expandafter\next\expandafter{\@tempa
1268 \setbox\@slidebox=\hbox{{%
1269 \@nameuse{semsfops@#3}%
1270 #2%
1271 \@nameuse{semsf@#3}{\box\@slidebox}}}}}%
1272 \slideframe{plain}
1273 % \end{macrocode}
1274 % \end{macro}
1275 %
1276 %
1277 % \section{Slide styles\label{slidestyles}}
1278 %
1279 % \begin{macro}{\slidestyle}
1280 % \begin{macrocode}
1281 \def\slidestyle#1{\@ifundefined{ss@#1}%
1282 {\@seminarerr{Slide style `#1' undefined}\@eha}%
1283 {\@nameuse{ss@#1}}}
1284 % \end{macrocode}
1285 % \end{macro}
1286 %
1287 % \begin{macro}{\ss@empty,\ss@plain,\ss@plainbottom}
1288 % The "plain" slide style places the slide label on the left side of the
1289 % framed slide, centered vertically. The caption is set in a box with zero
1290 % width so that it does not affect the centering of the slide on the page. In
1291 % the "plainbottom" style, the label is centered at the bottom of the slide.
1292 % \begin{macrocode}
1293 \def\ss@empty{\let\add@slidelabel\@gobble}
1294 \def\ss@left{\def\add@slidelabel##1{%
1295 \setbox\@slidebox=\hbox{%
1296 \vbox to \ht\@slidebox{\vss
1297 \hbox to 0pt{\hss##1\hskip 15pt}%
1298 \vss}\box\@slidebox}}}
1299 \def\ss@bottom{\def\add@slidelabel##1{%
1300 \setbox\@slidebox=\vbox{\copy\@slidebox\vskip 9pt
1301 \hbox to\wd\@slidebox{\hss##1\hss}}}}%
1302 \ifarticle
1303 \ifportrait\slidestyle{bottom}\else\slidestyle{left}\fi
1304 \else
1305 \slidestyle{empty}
1306 \fi
1307 % \end{macrocode}
1308 % \end{macro}
1309 %
1310 % \begin{macro}{\slidelabel}
1311 % \begin{macrocode}
1312 \def\slidelabel{\bf Slide \theslide}
1313 % \end{macrocode}
1314 % \end{macro}
1315 %
1316 %
1317 % \section{Page styles}
1318 %
1319 % \begin{macro}{\newpagestyle,\renewpagestyle}
1320 % The next two commands allow one to define new pages styles in the preamble
1321 % of a document without playing around with the catcode of "@".
1322 % \begin{macrocode}
1323 \def\newpagestyle#1#2#3{%
1324 \expandafter\newcommand\csname ps@#1\endcsname{%
1325 \def\@oddhead{#2}\let\@evenhead\@oddhead
1326 \def\@oddfoot{#3}\let\@evenfoot\@oddfoot}}
1327 \def\renewpagestyle#1#2#3{%
1328 \expandafter\renewcommand\csname ps@#1\endcsname{%
1329 \def\@oddhead{#2}\let\@evenhead\@oddhead
1330 \def\@oddfoot{#3}\let\@evenfoot\@oddfoot}}
1331 % \end{macrocode}
1332 % \end{macro}
1333 %
1334 % \begin{macro}{\slidepagestyle}
1335 % \begin{macrocode}
1336 \def\@ifgoodps#1{%
1337 \@ifundefined{ps@#1}{\@seminarerr{Page style `#1' undefined}\@eha}}
1338 \def\slidepagestyle#1{%
1339 \@ifgoodps{#1}%
1340 {\ifslide\pagestyle{#1}\else\edef\slide@pagestyle{#1}\fi}}
1341 \def\ps@{}
1342 \slidepagestyle{}
1343 % \end{macrocode}
1344 % \end{macro}
1345 %
1346 % \begin{macro}{\ps@align}
1347 % \begin{macrocode}
1348 \ifarticle
1349 \def\ps@align{}
1350 \else
1351 \def\ps@align{%
1352 \def\@oddhead{\thepage\hfil+}\let\@evenhead\@oddhead
1353 \def\@oddfoot{+\hfil+}\let\@evenfoot\@oddfoot}
1354 \fi
1355 % \end{macrocode}
1356 % \end{macro}
1357 %
1358 % \begin{macro}{\slideheadfont,\slidefootfont}
1359 % \begin{macrocode}
1360 \def\slideheadfont{\scriptsize}
1361 \def\slidefootfont{\scriptsize}
1362 % \end{macrocode}
1363 % \end{macro}
1364 %
1365 %
1366 % \section{Magnification}
1367 %
1368 % \begin{macro}{\magstep,\magstepminus}
1369 % We extend the definition of "\magstep"$n$ to $n=0,\ldots,9$, and define an
1370 % analogous macro for reduction. The argument of "\@magstep" {\em must be a
1371 % count register}.
1372 % \begin{macrocode}
1373 \def\magstep#1{\ifcase#1 \@m\or 1200\or 1440\or 1728\or
1374 2074\or 2488\or 2986\or 3583\or 4300\or 5160\fi\relax}
1375 \def\magstepminus#1{%
1376 \ifcase#1 \@m\or 833\or 694\or 579\or 482\or 401\fi\relax}
1377 \def\@magstep#1{%
1378 \ifnum#1<\z@\magstepminus{-#1}\else\magstep#1\fi}
1379 % \end{macrocode}
1380 % \end{macro}
1381 %
1382 % \begin{macro}{\invert@mag}
1383 % If "\cs" is a command sequence (not a count register) that expands to an
1384 % integer $n>0$, then "\invert@mag\cs" sets "\cs" to $1000 n^{-1}$. E.g.,
1385 % after the commands
1386 % \begin{Ex}
1387 % "\def\mymag{\magstep2}"
1388 % "\invert@mag\mymag"
1389 % \end{Ex}
1390 % the meaning of "\mymag" is ".694444". We use dimension registers to access
1391 % \TeX's internal arithmetic routines.
1392 % \begin{macrocode}
1393 {\catcode`\p=12\catcode`\t=12
1394 \gdef\@@inv@@mag#1pt#2{\def#2{#1}}}
1395 \def\invert@mag#1{\@tempdima=1000pt
1396 \divide\@tempdima by #1\relax
1397 \expandafter\@@inv@@mag\the\@tempdima#1}
1398 % \end{macrocode}
1399 % \end{macro}
1400 %
1401 % \begin{macro}{\@slidesmag,\@articlemag}
1402 % "\@slidesmag" and "\@articlemag" define "\inverseslidesmag" and
1403 % "\inverseartmag" for use by "\setslidelength", etc., using the "\invert@mag"
1404 % routine defined above. They also set the magnification of the document in
1405 % the "slides" or "article" format. Their arguments can be any magnification.
1406 % \begin{macrocode}
1407 \def\@slidesmag#1{%
1408 \@tempcnta=#1\relax%
1409 \ifnum\@tempcnta>0
1410 \edef\inverseslidesmag{\the\@tempcnta}%
1411 \invert@mag\inverseslidesmag
1412 \ifarticle\else\mag\@tempcnta\fi
1413 \else
1414 \@seminarerr{\string\@slidesmag\space argument must be an
1415 integer equal to 1000 times the magnification}\@eha
1416 \fi}
1417 \def\@articlemag#1{%
1418 \@tempcnta=#1\relax%
1419 \ifnum\@tempcnta>0
1420 \edef\inverseartmag{\the\@tempcnta}%
1421 \invert@mag\inverseartmag
1422 \ifarticle\mag\@tempcnta\fi
1423 \else
1424 \@seminarerr{\string\articlemag\space argument must be an
1425 integer equal to 1000 times the magnification}\@eha
1426 \fi}
1427 \addto@preamblecmds{\@slidesmag\do\@articlemag}
1428 % \end{macrocode}
1429 % \end{macro}
1430 %
1431 % \begin{macro}{\slidesmag,\articlemag}
1432 % "\slidesmag" and "\articlemag" are an interface to "\@slidesmag" and
1433 % "\@articlemag", and allow only "\magstep" type magnifications.
1434 % \begin{macrocode}
1435 \newdimen\semin
1436 \newdimen\semcm
1437 \def\@semmagerr#1{%
1438 \@seminarerr{\string#1 argument must be an integer
1439 between -5 and 9}\@eha}
1440 \def\slidesmag#1{%
1441 \@tempcnta=#1\relax
1442 \ifnum\@tempcnta>-6
1443 \ifnum\@tempcnta<10
1444 \edef\the@slidesmag{\the\@tempcnta}%
1445 \@slidesmag{\@magstep\@tempcnta}%
1446 \else
1447 \@semmagerr\slidesmag
1448 \fi
1449 \else
1450 \@semmagerr\slidesmag
1451 \fi
1452 \setslidelength\semin\seminlength
1453 \setslidelength\semcm\semcmlength}
1454 \def\seminlength{1in}
1455 \def\semcmlength{1cm}
1456 \def\articlemag#1{%
1457 \@tempcnta=#1\relax
1458 \ifnum\@tempcnta>-6
1459 \ifnum\@tempcnta<10
1460 \edef\the@articlemag{\the\@tempcnta}%
1461 \@articlemag{\@magstep\@tempcnta}%
1462 \else
1463 \@semmagerr\articlemag
1464 \fi
1465 \else
1466 \@semmagerr\articlemag
1467 \fi}
1468 \addto@preamblecmds{\slidesmag\do\articlemag}
1469 % \end{macrocode}
1470 % \end{macro}
1471 %
1472 % \begin{macro}{\setslidelength,\addtoslidelength}
1473 % \begin{macrocode}
1474 \def\setslidelength#1#2{%
1475 #1=#2\relax
1476 #1=\inverseslidesmag#1}%
1477 \def\addtoslidelength#1#2{%
1478 \dimen@=#2\relax
1479 \advance#1 by \inverseslidesmag\dimen@}
1480 % \end{macrocode}
1481 % \end{macro}
1482 %
1483 % \begin{macro}{\setartlength,\addtoartlength}
1484 % \begin{macrocode}
1485 \def\setartlength#1#2{%
1486 #1=#2\relax
1487 #1=\inverseartmag#1}
1488 \def\addtoartlength#1#2{%
1489 \dimen@=#2\relax
1490 \advance#1 by \inverseartmag\dimen@}
1491 % \end{macrocode}
1492 % \end{macro}
1493 %
1494 % \begin{macro}{\slide@epsfsize,\epsfslidesize}
1495 % \begin{macrocode}
1496 \def\slide@epsfsize#1#2{%
1497 \ifdim\epsfxsize=0pt
1498 \ifdim\epsfysize=0pt
1499 \inverseslidesmag#1%
1500 \else
1501 0pt
1502 \fi
1503 \else
1504 \inverseslidesmag\epsfxsize
1505 \fi
1506 \epsfysize
1507 \ifdim\epsfysize=0pt
1508 \ifdim\epsfxsize=0pt
1509 \inverseslidesmag#2%
1510 \else
1511 0pt
1512 \fi
1513 \else
1514 \inverseslidesmag\epsfysize
1515 \fi}
1516 \def\epsfslidesize{\let\epsfsize\slide@epsfsize}
1517 % \end{macrocode}
1518 % \end{macro}
1519 %
1520 % Now the default magnifications are set:
1521 % \begin{macrocode}
1522 \slidesmag{4}
1523 \articlemag{0}
1524 % \end{macrocode}
1525 %
1526 %
1527 % \section{Page parameters\label{pageparameters}}
1528 %
1529 % When the the document begins, the page parameters are scaled depending on
1530 % the format and the magnification for that format, so that it is as if the
1531 % parameters were set with "true" dimensions. This allows a user to change the
1532 % magnification in the preamble without having to go back and rescale the page
1533 % parameters.
1534 %
1535 % \begin{macro}{\do@pageparameters}
1536 % First, we define "\do@pageparameters" like "\do@specials", but with all the
1537 % page parameters listed on page 163 of Lamport's \LaTeX{} User's Guide and
1538 % Reference Manual. Parameters can be added the same way commands are added to
1539 % "\@preamblecmds".
1540 % \begin{macrocode}
1541 \def\do@pageparameters{%
1542 \do\oddsidemargin
1543 \do\evensidemargin
1544 \do\marginparwidth
1545 \do\marginparsep
1546 \do\topmargin
1547 \do\headheight
1548 \do\headsep
1549 \do\textheight
1550 \do\textwidth
1551 \do\topskip
1552 \do\footskip
1553 \do\footheight}
1554 % \end{macrocode}
1555 % \end{macro}
1556 %
1557 % \begin{macro}{\scale@pageparameters}
1558 % Now we define "\scale@pageparameters", which is invoked at the beginning of
1559 % the document, to scale the page parameters.
1560 % \begin{macrocode}
1561 \ifarticle
1562 \def\scale@pageparameters{%
1563 \begingroup
1564 \def\do##1{\global##1=\inverseartmag##1\relax}%
1565 \do@pageparameters
1566 \endgroup}
1567 \else
1568 \def\scale@pageparameters{%
1569 \begingroup
1570 \def\do##1{\global##1=\inverseslidesmag##1\relax}%
1571 \do@pageparameters
1572 \endgroup}
1573 \fi
1574 \addto@hook\before@document{\scale@pageparameters}
1575 \addto@preamblecmds{\scale@pageparameters\do\do@pageparameters}
1576 % \end{macrocode}
1577 % \end{macro}
1578 %
1579 % \section{Omitting and including notes}
1580 %
1581 % \begin{macro}{\allversions,\endallversions,\allversions*,\endallversions*}
1582 % The "allversions" environments are processed in any version.
1583 % \begin{macrocode}
1584 \def\allversions{}
1585 \let\endallversions\relax
1586 \@namedef{allversions*}{\@bsphack\globaldefs=1}
1587 \@namedef{endallversions*}{\@esphack}
1588 % \end{macrocode}
1589 % \end{macro}
1590 %
1591 % \begin{macro}{\slide@list,\addtoslidelist}
1592 % "\slide@list" stores the list of environments that are to be included with
1593 % the "slidesonly" selection. Environments are added to it using the
1594 % "\addtoslidelist" command.
1595 % \begin{macrocode}
1596 \def\slide@list{slide,slide*,allversions,allversions*}
1597 \def\addtoslidelist#1{\xdef\slide@list{\slide@list,#1}}
1598 \addto@preamblecmds{\addtoslidelist}
1599 % \end{macrocode}
1600 % \end{macro}
1601 %
1602 % \begin{macro}{\xcomment@hook}
1603 % The macro "\@xcomment", defined in "xcomment.sty", does the actual omitting
1604 % of notes in the "slidesonly" format. Only environments in "\slide@list" are
1605 % processed.
1606 % \begin{macrocode}
1607 \ifslidesonly
1608 \@ifundefined{xcomment@@@}{\@@input xcomment.sty }{}
1609 \def\xcomment@hook{\@xcomment{@@@}{\slide@list}}
1610 \newxcomment[]{note}
1611 \else
1612 \def\note{\@bsphack}%
1613 \def\endnote{\@esphack}%
1614 \fi
1615 \def\noxcomment{\def\xcomment@hook{}}
1616 % \end{macrocode}
1617 % \end{macro}
1618 %
1619 %
1620 % \section{Omitting and including slides\label{os}}
1621 %
1622 % This is pretty bad code, but it works.
1623 %
1624 % \begin{macro}{\onlyslides,\notslides}
1625 % "\onlyslides" and "\notslides" store their arguments, which should expand to
1626 % a comma separated list of numbers and ranges, in the command sequence
1627 % "\os@list". It is not immediately expanded, because the argument may contain
1628 % references that are not yet defined; recall that the ".aux" file is
1629 % processed at the beginning of the document.
1630 % \begin{macrocode}
1631 \def\os@list{}
1632 \newif\if@os
1633 \def\onlyslides#1{\def\os@list{#1}\@ostrue
1634 \def\os@warning{\@warning{\string\onlyslides\space argument
1635 contains undefined references}}}
1636 \def\notslides#1{\def\os@list{#1}\@osfalse
1637 \def\os@warning{\@warning{\string\notslides\space argument
1638 contains undefined references}}}
1639 \addto@preamblecmds{\onlyslides\do\notslides}
1640 % \end{macrocode}
1641 % \end{macro}
1642 %
1643 %
1644 % \begin{macro}{\os@expandlist}
1645 % "\os@expandlist" is invoked at the beginning of the document, after the
1646 % ".aux" files has been processed.
1647 % \begin{macrocode}
1648 \addto@hook\after@document{%
1649 \ifx\os@list\@empty\else\os@expandlist\fi}
1650 % \end{macrocode}
1651 % "\os@expandlist" first expands the list, and then processes each
1652 % comma-separated entry with "\os@expandrange".
1653 % \begin{macrocode}
1654 \def\os@expandlist{%
1655 \let\os@@warning\relax
1656 \begingroup
1657 \def\ref##1{\@ifundefined{r@##1}{?}%
1658 {\noexpand\@car\@nameuse{r@##1}\noexpand\@nil}}%
1659 \edef\@tempd{\os@list}%
1660 \xdef\os@list{}%
1661 \@for\@tempc:=\@tempd
1662 \do{\expandafter\os@expandrange\@tempc-:-:\@nil}%
1663 \os@@warning
1664 \endgroup
1665 \let\os@expandrange\relax
1666 \let\os@checknum\relax
1667 \let\os@expandlist\relax}
1668 % \end{macrocode}
1669 % \end{macro}
1670 %
1671 % \begin{macro}{\os@expandrange}
1672 % "\os@expandrange" expands entries of the form $m$-$n$ to $(m-1)$+$(n+1)$,
1673 % which will simplify checking slide numbers against the list ("+" is used as
1674 % a separator instead of "-" to allow for negative numbers). Entries that
1675 % consist of a single number $n$ are treated like a range $n$-$n$.
1676 % \begin{macrocode}
1677 \def\os@expandrange#1-#2-#3\@nil{%
1678 \def\@tempa{?}\def\@tempb{#1}%
1679 \ifx\@tempa\@tempb
1680 \let\os@@warning\os@warning
1681 \else
1682 \@tempcnta=#1\relax
1683 \def\@tempb{#2}%
1684 \ifx\@tempa\@tempb
1685 \let\os@@warning\os@warning
1686 \else
1687 \def\@tempa{:}%
1688 \ifx\@tempa\@tempb
1689 \@tempcntb=\@tempcnta
1690 \else
1691 \@tempcntb=#2\relax
1692 \fi
1693 \advance\@tempcnta by -1
1694 \advance\@tempcntb by 1
1695 \ifx\os@list\@empty
1696 \xdef\os@list{\the\@tempcnta+\the\@tempcntb}%
1697 \else
1698 \xdef\os@list{\os@list,\the\@tempcnta+\the\@tempcntb}%
1699 \fi
1700 \fi
1701 \fi}
1702 % \end{macrocode}
1703 % \end{macro}
1704 %
1705 %
1706 % \begin{macro}{\os@test}
1707 % "\os@test" checks whether a slide should be processed. For each entry
1708 % $m$-$n$ in the list "\os@list", if the slide number is greater than $m$ and
1709 % less than $n$, "\if@test" is set to "\if@os". Recall that "\if@os" is
1710 % "\iftrue" is "\os@list" is a list of slides to be included, and is
1711 % "\iffalse" if "\os@list" is a list of slides to be excluded.
1712 % \begin{macrocode}
1713 \def\os@test{%
1714 \@testtrue
1715 \iflandscape
1716 \ifnum\@landscapeonly=-1 \@testfalse\fi
1717 \else
1718 \ifnum\@landscapeonly=1 \@testfalse\fi
1719 \fi
1720 \if@test
1721 \ifx\os@list\@empty\else
1722 \if@os\@testfalse\fi
1723 \@for\@tempa:=\os@list\do{\expandafter\os@testrange\@tempa\@nil}%
1724 \fi
1725 \fi}
1726 \def\os@testrange#1+#2\@nil{%
1727 \ifnum\c@slide>#1
1728 \ifnum\c@slide<#2
1729 \if@os\@testtrue\else\@testfalse\fi
1730 \fi
1731 \fi}
1732 % \end{macrocode}
1733 % \end{macro}
1734 %
1735 %
1736 % \begin{macro}{\onlynotestoo}
1737 % \begin{macrocode}
1738 \def\onlynotestoo{%
1739 \ifnotes\@testtrue\else\ifnotesonly\@testtrue\else\@testfalse\fi\fi
1740 \if@test
1741 \@ifundefined{xcomment@@@}{%
1742 \edef\sem@temp{\the\catcode`\@}%
1743 \catcode`\@=11
1744 \@@input xcomment.sty
1745 \catcode`\@=\sem@temp\relax}{}%
1746 \def\xcomment@hook{\@xcomment{@@@}{\slide@list}}%
1747 \addto@hook\after@slide\onlynotes@too
1748 \fi}
1749 \def\onlynotes@too{%
1750 \os@test
1751 \if@test\gdef\do@end{}\else\gdef\do@end{\xc@begin}\fi}
1752 \addto@preamblecmds\onlynotestoo
1753 % \end{macrocode}
1754 % \end{macro}
1755 %
1756 %
1757 % \section{Font size declarations\label{fontsize}}
1758 %
1759 % \begin{macro}{\ptsize}
1760 % The "\ptsize{"$n$"}" command invokes a macro so that the font size
1761 % declarations are defined as in "art"$n$".sty", except that the font size
1762 % declarations only affect the sizes of fonts, and not the list or display
1763 % parameters. These parameters are set at the beginning of each slide
1764 % environment. "\ptsize" should only be used in slide environments.
1765 % \begin{macrocode}
1766 \def\ptsize#1{%
1767 \@ifundefined{#1@semptsize}%
1768 {\@seminarerr{\string\ptsize\space `#1' not valid.}\@eha}%
1769 {\ifslide
1770 \sem@ptsize{#1}\large\normalsize
1771 \else
1772 \edef\slide@ptsize{#1}%
1773 \fi}}
1774 \edef\slide@ptsize{1\@ptsize}%
1775 \def\slidefontsizes{\ptsize} %For backwards compatibility??
1776 % \end{macrocode}
1777 % \end{macro}
1778 %
1779 % \begin{macro}{\slide@setsize}
1780 % This is a variant of "\@setsize" that makes the minimum space between lines
1781 % be "\slideskip" times the extra space between lines.
1782 % \begin{macrocode}
1783 \def\slide@setsize#1#2#3#4{%
1784 \@setsize{#1}{#2}{#3}{#4}%
1785 \set@slideskip{#2}}
1786 \def\slide@@setsize#1#2#3#4{%
1787 \slide@setsize{#1}{#2}{#3}{#4}\slidedisplayskips}
1788 \def\set@slideskip#1{%
1789 \normallineskiplimit=#1
1790 \advance\normallineskiplimit-\normalbaselineskip
1791 \multiply\normallineskiplimit-1
1792 \normallineskiplimit\slideskip\normallineskiplimit
1793 \ifdim\normallineskiplimit<1pt\normallineskiplimit=1pt\fi
1794 \normallineskip=\normallineskiplimit
1795 minus \slideshrink\normallineskiplimit
1796 \dimen@=\normalbaselineskip
1797 \normalbaselineskip=\dimen@ minus \slideshrink\normallineskiplimit
1798 \normalbaselines}
1799 \def\slideskip{.75}
1800 \def\slideshrink{.25}
1801 % \end{macrocode}
1802 % \end{macro}
1803 %
1804 % \begin{macro}{\slidedisplayskips}
1805 % "\slidedisplayskips" sets the displays skips to smaller values than they
1806 % would usually have in the "article" document style.
1807 % \begin{macrocode}
1808 \def\slidedisplayskips{%
1809 \abovedisplayskip 1.75ex minus .35ex
1810 \belowdisplayskip \abovedisplayskip
1811 \abovedisplayshortskip .2ex minus .2ex
1812 \belowdisplayshortskip 1ex minus .2ex}
1813 % \end{macrocode}
1814 % \end{macro}
1815 %
1816 % \begin{macro}{\sem@ptsize}
1817 % \begin{macrocode}
1818 \def\sem@ptsize#1{%
1819 \@nameuse{#1@semptsize}%
1820 \large\normalsize
1821 \leftmargini\slideleftmargini\relax
1822 \leftmarginii\slideleftmarginii\relax
1823 \leftmarginiii\slideleftmarginiii\relax
1824 \labelsep\slidelabelsep\relax
1825 \parskip\slideparskip\relax
1826 \parindent\slideparindent\relax
1827 \slide@rightskip
1828 \slide@listi
1829 \skip\footins\slidefootins\relax
1830 \footnotesep\slidefootnotesep\relax}
1831 \def\slidefootins{2ex minus .8ex}
1832 \def\slidefootnotesep{1.2ex}
1833 \def\slideparindent{\z@}
1834 \def\slideparskip{1ex minus .2ex}
1835 % \end{macrocode}
1836 % \end{macro}
1837 %
1838 % \begin{macro}{\8@semptsize}
1839 % \begin{macrocode}
1840 \@namedef{8@semptsize}{%
1841 \def\@normalsize{\slide@@setsize\normalsize{9.5pt}\viiipt\@viiipt}%
1842 \def\small{\slide@@setsize\small{8pt}\viipt\@viipt}%
1843 \def\footnotesize{\slide@@setsize\footnotesize{8pt}\vipt\@vipt}%
1844 \def\scriptsize{\slide@setsize\scriptsize{7pt}\vipt\@vipt}%
1845 \def\tiny{\slide@setsize\tiny{6pt}\vpt\@vpt}%
1846 \def\large{\slide@setsize\large{12pt}\xpt\@xpt}%
1847 \def\Large{\slide@setsize\Large{14pt}\xiipt\@xiipt}%
1848 \def\LARGE{\slide@setsize\LARGE{17pt}\xivpt\@xivpt}%
1849 \def\huge{\slide@setsize\huge{20pt}\xviipt\@xviipt}%
1850 \def\Huge{\slide@setsize\Huge{25pt}\xxpt\@xxpt}}
1851 % \end{macrocode}
1852 % \end{macro}
1853 %
1854 % \begin{macro}{\9@semptsize}
1855 % \begin{macrocode}
1856 \@namedef{9@semptsize}{%
1857 \def\@normalsize{\slide@@setsize\normalsize{11pt}\ixpt\@ixpt}%
1858 \def\small{\slide@@setsize\small{9.5pt}\viiipt\@viiipt}%
1859 \def\footnotesize{\slide@@setsize\footnotesize{8pt}\viipt\@viipt}%
1860 \def\scriptsize{\slide@setsize\scriptsize{7pt}\vipt\@vipt}%
1861 \def\tiny{\slide@setsize\tiny{6pt}\vpt\@vpt}%
1862 \def\large{\slide@setsize\large{12pt}\xpt\@xpt}%
1863 \def\Large{\slide@setsize\Large{14pt}\xiipt\@xiipt}%
1864 \def\LARGE{\slide@setsize\LARGE{17pt}\xivpt\@xivpt}%
1865 \def\huge{\slide@setsize\huge{20pt}\xviipt\@xviipt}%
1866 \def\Huge{\slide@setsize\Huge{25pt}\xxpt\@xxpt}}
1867 % \end{macrocode}
1868 % \end{macro}
1869 %
1870 % \begin{macro}{\10@semptsize}
1871 % \begin{macrocode}
1872 \@namedef{10@semptsize}{%
1873 \def\@normalsize{\slide@@setsize\normalsize{12pt}\xpt\@xpt}%
1874 \def\small{\slide@@setsize\small{11pt}\ixpt\@ixpt}%
1875 \def\footnotesize{\slide@@setsize\footnotesize{9.5pt}\viiipt\@viiipt}%
1876 \def\scriptsize{\slide@setsize\scriptsize{8pt}\viipt\@viipt}%
1877 \def\tiny{\slide@setsize\tiny{6pt}\vpt\@vpt}%
1878 \def\large{\slide@setsize\large{14pt}\xiipt\@xiipt}%
1879 \def\Large{\slide@setsize\Large{18pt}\xivpt\@xivpt}%
1880 \def\LARGE{\slide@setsize\LARGE{22pt}\xviipt\@xviipt}%
1881 \def\huge{\slide@setsize\huge{25pt}\xxpt\@xxpt}%
1882 \def\Huge{\slide@setsize\Huge{30pt}\xxvpt\@xxvpt}}
1883 % \end{macrocode}
1884 % \end{macro}
1885 %
1886 % \begin{macro}{\11@semptsize}
1887 % \begin{macrocode}
1888 \@namedef{11@semptsize}{%
1889 \def\@normalsize{\slide@@setsize\normalsize{13.6pt}\xipt\@xipt}%
1890 \def\small{\slide@@setsize\small{12pt}\xpt\@xpt}%
1891 \def\footnotesize{\slide@@setsize\footnotesize{11pt}\ixpt\@ixpt}%
1892 \def\scriptsize{\slide@setsize\scriptsize{9.5pt}\viiipt\@viiipt}%
1893 \def\tiny{\slide@setsize\tiny{7pt}\vipt\@vipt}%
1894 \def\large{\slide@setsize\large{14pt}\xiipt\@xiipt}%
1895 \def\Large{\slide@setsize\Large{18pt}\xivpt\@xivpt}%
1896 \def\LARGE{\slide@setsize\LARGE{22pt}\xviipt\@xviipt}%
1897 \def\huge{\slide@setsize\huge{25pt}\xxpt\@xxpt}%
1898 \def\Huge{\slide@setsize\Huge{30pt}\xxvpt\@xxvpt}}
1899 % \end{macrocode}
1900 % \end{macro}
1901 %
1902 % \begin{macro}{\12@semptsize}
1903 % \begin{macrocode}
1904 \@namedef{12@semptsize}{%
1905 \def\@normalsize{\slide@@setsize\normalsize{14.5pt}\xiipt\@xiipt}%
1906 \def\small{\slide@@setsize\small{13.6pt}\xipt\@xipt}%
1907 \def\footnotesize{\slide@@setsize\footnotesize{12pt}\xpt\@xpt}%
1908 \def\scriptsize{\slide@setsize\scriptsize{9.5pt}\viiipt\@viiipt}%
1909 \def\tiny{\slide@setsize\tiny{7pt}\vipt\@vipt}%
1910 \def\large{\slide@setsize\large{18pt}\xivpt\@xivpt}%
1911 \def\Large{\slide@setsize\Large{22pt}\xviipt\@xviipt}%
1912 \def\LARGE{\slide@setsize\LARGE{25pt}\xxpt\@xxpt}%
1913 \def\huge{\slide@setsize\huge{30pt}\xxvpt\@xxvpt}%
1914 \let\Huge\huge}
1915 % \end{macrocode}
1916 % \end{macro}
1917 %
1918 %
1919 % \begin{macro}{\14@semptsize}
1920 % \begin{macrocode}
1921 \@namedef{14@semptsize}{%
1922 \def\@normalsize{\slide@@setsize\normalsize{18pt}\xivpt\@xivpt}%
1923 \def\small{\slide@@setsize\small{14.5pt}\xiipt\@xiipt}%
1924 \def\footnotesize{\slide@@setsize\footnotesize{13.6pt}\xipt\@xipt}%
1925 \def\scriptsize{\slide@setsize\scriptsize{12pt}\xpt\@xpt}%
1926 \def\tiny{\slide@setsize\tiny{9.5pt}\viiipt\@viiipt}%
1927 \def\large{\slide@setsize\large{22pt}\xviipt\@xviipt}%
1928 \def\Large{\slide@setsize\Large{25pt}\xxpt\@xxpt}%
1929 \def\LARGE{\slide@setsize\LARGE{30pt}\xxvpt\@xxvpt}%
1930 \let\huge\LARGE
1931 \let\Huge\LARGE}
1932 % \end{macrocode}
1933 % \end{macro}
1934 %
1935 % \begin{macro}{\17@semptsize}
1936 % \begin{macrocode}
1937 \@namedef{17@semptsize}{%
1938 \def\@normalsize{\slide@@setsize\normalsize{22pt}\xviipt\@xviipt}%
1939 \def\small{\slide@@setsize\small{18pt}\xivpt\@xivpt}%
1940 \def\footnotesize{\slide@@setsize\footnotesize{14.5pt}\xiipt\@xiipt}%
1941 \def\scriptsize{\slide@setsize\scriptsize{13.6pt}\xipt\@xipt}%
1942 \def\tiny{\slide@setsize\tiny{12pt}\xpt\@xpt}%
1943 \def\large{\slide@setsize\large{25pt}\xxpt\@xxpt}%
1944 \def\Large{\slide@setsize\Large{30pt}\xxvpt\@xxvpt}%
1945 \let\LARGE\Large
1946 \let\huge\Large
1947 \let\Huge\Large}
1948 % \end{macrocode}
1949 % \end{macro}
1950 %
1951 %
1952 % \section{The $\setminus$twoup macro}
1953 %
1954 % \begin{macro}{\twoup}
1955 % See "2up.sty" for details.
1956 % \begin{macrocode}
1957 \def\twoup{\@ifnextchar[{\@twoup}{\@twoup[0]}}
1958 \ifarticle
1959 \ifportrait
1960 \def\@twoup[#1]{%
1961 \@tempcnta=\the@articlemag\relax
1962 \@tempcntb=\@tempcnta
1963 \advance\@tempcntb by #1\relax
1964 \advance\@tempcntb by -2\relax
1965 \ifnum\@tempcntb>-6\relax
1966 \@@input 2up.tex
1967 \source{\@magstep\@tempcnta}{\paperheight}{\paperwidth}%
1968 \target{\@magstep\@tempcntb}{\paperwidth}{\paperheight}%
1969 \targetlayout{topbottom}%
1970 \printlandscapefalse
1971 \else
1972 \@seminarerr{Article magnification is too low for
1973 \string\twoup\space to handle}\@eha
1974 \fi
1975 \def\articlemag##1{\@semtwoupmagerr\articlemag}}
1976 \else
1977 \def\@twoup[#1]{%
1978 \@tempcnta=\the@articlemag\relax
1979 \@tempcntb=\@tempcnta
1980 \advance\@tempcntb by #1\relax
1981 \advance\@tempcntb by -2\relax
1982 \ifnum\@tempcntb>-6\relax
1983 \@@input 2up.tex
1984 \source{\@magstep\@tempcnta}{\paperwidth}{\paperheight}%
1985 \target{\@magstep\@tempcntb}{\paperheight}{\paperwidth}%
1986 \if@twoside
1987 \targetlayout{twosided}%
1988 \fi
1989 \printlandscapetrue
1990 \else
1991 \@seminarerr{Article magnification is too low for
1992 \string\twoup\space to handle}\@eha
1993 \fi
1994 \def\articlemag##1{\@semtwoupmagerr\articlemag}}
1995 \fi
1996 \else
1997 \ifportrait
1998 \def\@twoup[#1]{%
1999 \@tempcnta=\the@slidesmag\relax
2000 \@tempcntb=\@tempcnta
2001 \advance\@tempcntb by #1\relax
2002 \advance\@tempcntb by -3\relax
2003 \ifnum\@tempcntb>-6\relax
2004 \@@input 2up.tex
2005 \source{\@magstep\@tempcnta}{\paperwidth}{\paperheight}%
2006 \advance\@tempcnta by -3
2007 \target{\@magstep\@tempcnta}{\paperheight}{\paperwidth}%
2008 \printlandscapetrue
2009 \else
2010 \@seminarerr{Slides magnification is too low for
2011 \string\twoup\space to handle}\@eha
2012 \fi
2013 \def\slidesmag##1{\@semtwoupmagerr\slidesmag}}
2014 \else
2015 \def\@twoup[#1]{%
2016 \@tempcnta=\the@slidesmag\relax
2017 \@tempcntb=\@tempcnta
2018 \advance\@tempcntb by #1\relax
2019 \advance\@tempcntb by -3\relax
2020 \ifnum\@tempcntb>-6\relax
2021 \@@input 2up.tex
2022 \source{\@magstep\@tempcnta}{\paperheight}{\paperwidth}%
2023 \target{\@magstep\@tempcntb}{\paperwidth}{\paperheight}%
2024 \targetlayout{topbottom}%
2025 \printlandscapefalse
2026 \else
2027 \@seminarerr{Slides magnification is too low for
2028 \string\twoup\space to handle}\@eha
2029 \fi
2030 \def\slidesmag##1{\@semtwoupmargerr\slidesmag}}%
2031 \fi
2032 \fi
2033 \def\@semtwoupmagerr#1{%
2034 \@seminarerr{\string#1 must come before \string\twoup}\@eha}
2035 \addto@preamblecmds{\twoup\do\@twoup}
2036 % \end{macrocode}
2037 % \end{macro}
2038 %
2039 %
2040 % \section{Configuration file}
2041 %
2042 % \begin{macrocode}
2043 \openin1 seminar.con
2044 \ifeof1\else\closein1 \relax\@@input seminar.con\fi
2045 % \end{macrocode}
2046 %
2047 \endinput
2048 % END: seminar.doc