Debian Codegraph @

src/interfaces/libpq/po/zh_TW.po

raw
1 # Traditional Chinese message translation file for libpq
2 # Copyright (C) 2023 PostgreSQL Global Development Group
3 # This file is distributed under the same license as the libpq (PostgreSQL) package.
4 # 2004-11-11 Zhenbang Wei <[email protected]>
5 #
6 msgid ""
7 msgstr ""
8 "Project-Id-Version: libpq (PostgreSQL) 16\n"
9 "Report-Msgid-Bugs-To: [email protected]\n"
10 "POT-Creation-Date: 2023-09-11 20:40+0000\n"
11 "PO-Revision-Date: 2023-11-06 08:49+0800\n"
12 "Last-Translator: Zhenbang Wei <[email protected]>\n"
13 "Language-Team: \n"
14 "Language: zh_TW\n"
15 "MIME-Version: 1.0\n"
16 "Content-Type: text/plain; charset=UTF-8\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Plural-Forms: nplurals=1; plural=0;\n"
19 "X-Generator: Poedit 3.4.1\n"
20
21 # utils/fmgr/dfmgr.c:145
22 #: ../../port/thread.c:50 ../../port/thread.c:86
23 #, c-format
24 msgid "could not look up local user ID %d: %s"
25 msgstr "無法查詢本地使用者ID %d: %s"
26
27 # libpq/hba.c:1481 libpq/hba.c:1512 libpq/hba.c:1582
28 #: ../../port/thread.c:55 ../../port/thread.c:91
29 #, c-format
30 msgid "local user with ID %d does not exist"
31 msgstr "本地使用者ID %d 不存在"
32
33 #: fe-auth-scram.c:227
34 #, c-format
35 msgid "malformed SCRAM message (empty message)"
36 msgstr "SCRAM訊息格式錯誤(空訊息)"
37
38 #: fe-auth-scram.c:232
39 #, c-format
40 msgid "malformed SCRAM message (length mismatch)"
41 msgstr "SCRAM訊息格式錯誤(長度不一致)"
42
43 #: fe-auth-scram.c:275
44 #, c-format
45 msgid "could not verify server signature: %s"
46 msgstr "無法驗證伺服器簽名: %s"
47
48 #: fe-auth-scram.c:281
49 #, c-format
50 msgid "incorrect server signature"
51 msgstr "伺服器簽名錯誤"
52
53 # tcop/postgres.c:3105
54 #: fe-auth-scram.c:290
55 #, c-format
56 msgid "invalid SCRAM exchange state"
57 msgstr "SCRAM交換狀態無效"
58
59 #: fe-auth-scram.c:317
60 #, c-format
61 msgid "malformed SCRAM message (attribute \"%c\" expected)"
62 msgstr "SCRAM訊息格式錯誤(預期屬性 \"%c\")"
63
64 #: fe-auth-scram.c:326
65 #, c-format
66 msgid "malformed SCRAM message (expected character \"=\" for attribute \"%c\")"
67 msgstr "SCRAM訊息格式錯誤(屬性 \"%c\" 的預期字元是 \"=\" )"
68
69 # access/transam/xlog.c:4111
70 #: fe-auth-scram.c:366
71 #, c-format
72 msgid "could not generate nonce"
73 msgstr "無法產生nonce"
74
75 # commands/sequence.c:798 executor/execGrouping.c:328
76 # executor/execGrouping.c:388 executor/nodeIndexscan.c:1051 lib/dllist.c:43
77 # lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:1006
78 # postmaster/pgstat.c:1023 postmaster/pgstat.c:2452 postmaster/pgstat.c:2527
79 # postmaster/pgstat.c:2572 postmaster/pgstat.c:2623
80 # postmaster/postmaster.c:755 postmaster/postmaster.c:1625
81 # postmaster/postmaster.c:2344 storage/buffer/localbuf.c:139
82 # storage/file/fd.c:587 storage/file/fd.c:620 storage/file/fd.c:766
83 # storage/ipc/sinval.c:789 storage/lmgr/lock.c:497 storage/smgr/md.c:138
84 # storage/smgr/md.c:848 storage/smgr/smgr.c:213 utils/adt/cash.c:297
85 # utils/adt/cash.c:312 utils/adt/oracle_compat.c:73
86 # utils/adt/oracle_compat.c:124 utils/adt/regexp.c:191
87 # utils/adt/ri_triggers.c:3471 utils/cache/relcache.c:164
88 # utils/cache/relcache.c:178 utils/cache/relcache.c:1130
89 # utils/cache/typcache.c:165 utils/cache/typcache.c:487
90 # utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:521 utils/fmgr/fmgr.c:532
91 # utils/init/miscinit.c:213 utils/init/miscinit.c:234
92 # utils/init/miscinit.c:244 utils/misc/guc.c:1898 utils/misc/guc.c:1911
93 # utils/misc/guc.c:1924 utils/mmgr/aset.c:337 utils/mmgr/aset.c:503
94 # utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 utils/mmgr/portalmem.c:75
95 #: fe-auth-scram.c:375 fe-auth-scram.c:448 fe-auth-scram.c:600
96 #: fe-auth-scram.c:620 fe-auth-scram.c:644 fe-auth-scram.c:658
97 #: fe-auth-scram.c:704 fe-auth-scram.c:740 fe-auth-scram.c:914 fe-auth.c:296
98 #: fe-auth.c:369 fe-auth.c:403 fe-auth.c:618 fe-auth.c:729 fe-auth.c:1210
99 #: fe-auth.c:1375 fe-connect.c:925 fe-connect.c:1759 fe-connect.c:1921
100 #: fe-connect.c:3291 fe-connect.c:4496 fe-connect.c:5161 fe-connect.c:5416
101 #: fe-connect.c:5534 fe-connect.c:5781 fe-connect.c:5861 fe-connect.c:5959
102 #: fe-connect.c:6210 fe-connect.c:6237 fe-connect.c:6313 fe-connect.c:6336
103 #: fe-connect.c:6360 fe-connect.c:6395 fe-connect.c:6481 fe-connect.c:6489
104 #: fe-connect.c:6846 fe-connect.c:6996 fe-exec.c:527 fe-exec.c:1321
105 #: fe-exec.c:3111 fe-exec.c:4071 fe-exec.c:4235 fe-gssapi-common.c:109
106 #: fe-lobj.c:870 fe-protocol3.c:204 fe-protocol3.c:228 fe-protocol3.c:256
107 #: fe-protocol3.c:273 fe-protocol3.c:353 fe-protocol3.c:720 fe-protocol3.c:959
108 #: fe-protocol3.c:1770 fe-protocol3.c:2170 fe-secure-common.c:110
109 #: fe-secure-gssapi.c:500 fe-secure-openssl.c:434 fe-secure-openssl.c:1285
110 #, c-format
111 msgid "out of memory"
112 msgstr "記憶體不足"
113
114 #: fe-auth-scram.c:382
115 #, c-format
116 msgid "could not encode nonce"
117 msgstr "無法編碼nonce"
118
119 # fe-connect.c:1197
120 #: fe-auth-scram.c:570
121 #, c-format
122 msgid "could not calculate client proof: %s"
123 msgstr "無法計算客戶端證明: %s"
124
125 # libpq/pqcomm.c:1001
126 #: fe-auth-scram.c:585
127 #, c-format
128 msgid "could not encode client proof"
129 msgstr "無法編碼客戶端證明"
130
131 #: fe-auth-scram.c:637
132 #, c-format
133 msgid "invalid SCRAM response (nonce mismatch)"
134 msgstr "SCRAM回應無效(nonce不一致)"
135
136 #: fe-auth-scram.c:667
137 #, c-format
138 msgid "malformed SCRAM message (invalid salt)"
139 msgstr "SCRAM訊息格式錯誤(salt無效)"
140
141 #: fe-auth-scram.c:680
142 #, c-format
143 msgid "malformed SCRAM message (invalid iteration count)"
144 msgstr "SCRAM訊息格式錯誤(迭代次數無效)"
145
146 #: fe-auth-scram.c:685
147 #, c-format
148 msgid "malformed SCRAM message (garbage at end of server-first-message)"
149 msgstr "SCRAM訊息格式錯誤(伺服器首次訊息結尾有垃圾資料)"
150
151 # libpq/auth.c:585
152 #: fe-auth-scram.c:719
153 #, c-format
154 msgid "error received from server in SCRAM exchange: %s"
155 msgstr "SCRAM交換時從伺服器收到錯誤: %s"
156
157 #: fe-auth-scram.c:734
158 #, c-format
159 msgid "malformed SCRAM message (garbage at end of server-final-message)"
160 msgstr "SCRAM訊息格式錯誤(伺服器最終訊息結尾有垃圾資料)"
161
162 #: fe-auth-scram.c:751
163 #, c-format
164 msgid "malformed SCRAM message (invalid server signature)"
165 msgstr "SCRAM訊息格式錯誤(伺服器簽名無效)"
166
167 # access/transam/xlog.c:4111
168 #: fe-auth-scram.c:923
169 msgid "could not generate random salt"
170 msgstr "無法產生隨機salt"
171
172 #: fe-auth.c:77
173 #, c-format
174 msgid "out of memory allocating GSSAPI buffer (%d)"
175 msgstr "配置GSSAPI緩衝區時記憶體不足(%d)"
176
177 #: fe-auth.c:138
178 msgid "GSSAPI continuation error"
179 msgstr "GSSAPI continuation錯誤"
180
181 # commands/aggregatecmds.c:111
182 #: fe-auth.c:168 fe-auth.c:397 fe-gssapi-common.c:97 fe-secure-common.c:99
183 #: fe-secure-common.c:173
184 #, c-format
185 msgid "host name must be specified"
186 msgstr "必須指定主機名稱"
187
188 #: fe-auth.c:174
189 #, c-format
190 msgid "duplicate GSS authentication request"
191 msgstr "重複的GSS驗證請求"
192
193 #: fe-auth.c:238
194 #, c-format
195 msgid "out of memory allocating SSPI buffer (%d)"
196 msgstr "配置SSPI緩衝區時記憶體不足(%d)"
197
198 #: fe-auth.c:285
199 msgid "SSPI continuation error"
200 msgstr "SSPI continuation錯誤"
201
202 #: fe-auth.c:359
203 #, c-format
204 msgid "duplicate SSPI authentication request"
205 msgstr "重複的SSPI驗證請求"
206
207 # libpq/be-secure.c:807
208 #: fe-auth.c:384
209 msgid "could not acquire SSPI credentials"
210 msgstr "無法取得SSPI憑證"
211
212 #: fe-auth.c:437
213 #, c-format
214 msgid "channel binding required, but SSL not in use"
215 msgstr "需要通道綁定,但未使用SSL"
216
217 #: fe-auth.c:443
218 #, c-format
219 msgid "duplicate SASL authentication request"
220 msgstr "重複的SASL驗證請求"
221
222 #: fe-auth.c:501
223 #, c-format
224 msgid "channel binding is required, but client does not support it"
225 msgstr "需要通道綁定,但客戶端不支援"
226
227 #: fe-auth.c:517
228 #, c-format
229 msgid "server offered SCRAM-SHA-256-PLUS authentication over a non-SSL connection"
230 msgstr "伺服器在非SSL連線提供SCRAM-SHA-256-PLUS身份驗證"
231
232 # fe-auth.c:608
233 #: fe-auth.c:531
234 #, c-format
235 msgid "none of the server's SASL authentication mechanisms are supported"
236 msgstr "沒有支援伺服器的任何SASL身份驗證機制"
237
238 #: fe-auth.c:538
239 #, c-format
240 msgid "channel binding is required, but server did not offer an authentication method that supports channel binding"
241 msgstr "需要通道綁定,但伺服器未提供支援通道綁定的身份驗證方法"
242
243 #: fe-auth.c:641
244 #, c-format
245 msgid "out of memory allocating SASL buffer (%d)"
246 msgstr "配置SASL緩衝區時記憶體不足(%d)"
247
248 # libpq/auth.c:391
249 #: fe-auth.c:665
250 #, c-format
251 msgid "AuthenticationSASLFinal received from server, but SASL authentication was not completed"
252 msgstr "從伺服器收到AuthenticationSASLFinal,但SASL身份驗證未完成"
253
254 #: fe-auth.c:675
255 #, c-format
256 msgid "no client response found after SASL exchange success"
257 msgstr "SASL交換成功後找不到客戶端回應"
258
259 #: fe-auth.c:738 fe-auth.c:745 fe-auth.c:1358 fe-auth.c:1369
260 #, c-format
261 msgid "could not encrypt password: %s"
262 msgstr "無法加密密碼: %s"
263
264 #: fe-auth.c:773
265 msgid "server requested a cleartext password"
266 msgstr "伺服器要求明文密碼"
267
268 #: fe-auth.c:775
269 msgid "server requested a hashed password"
270 msgstr "伺服器要求密碼雜湊"
271
272 #: fe-auth.c:778
273 msgid "server requested GSSAPI authentication"
274 msgstr "伺服器要求GSSAPI身份驗證"
275
276 #: fe-auth.c:780
277 msgid "server requested SSPI authentication"
278 msgstr "伺服器要求SSPI身份驗證"
279
280 #: fe-auth.c:784
281 msgid "server requested SASL authentication"
282 msgstr "伺服器要求SASL身份驗證"
283
284 #: fe-auth.c:787
285 msgid "server requested an unknown authentication type"
286 msgstr "伺服器要求未知的身份驗證類型"
287
288 #: fe-auth.c:820
289 #, c-format
290 msgid "server did not request an SSL certificate"
291 msgstr "伺服器未要求SSL憑證"
292
293 #: fe-auth.c:825
294 #, c-format
295 msgid "server accepted connection without a valid SSL certificate"
296 msgstr "伺服器接受一個沒有有效SSL憑證的連線"
297
298 #: fe-auth.c:879
299 msgid "server did not complete authentication"
300 msgstr "伺服器未完成身份驗證"
301
302 # fe-auth.c:655
303 #: fe-auth.c:913
304 #, c-format
305 msgid "authentication method requirement \"%s\" failed: %s"
306 msgstr "身份驗證方法需求\"%s\"失敗: %s"
307
308 #: fe-auth.c:936
309 #, c-format
310 msgid "channel binding required, but server authenticated client without channel binding"
311 msgstr "需要通道綁定,但伺服器在未進行通道綁定的情況下對客戶端進行了身份驗證"
312
313 #: fe-auth.c:941
314 #, c-format
315 msgid "channel binding required but not supported by server's authentication request"
316 msgstr "需要通道綁定,但伺服器的身份驗證請求不支援此功能"
317
318 # fe-auth.c:608
319 #: fe-auth.c:975
320 #, c-format
321 msgid "Kerberos 4 authentication not supported"
322 msgstr "不支援Kerberos 4身份驗證"
323
324 # fe-auth.c:627
325 #: fe-auth.c:979
326 #, c-format
327 msgid "Kerberos 5 authentication not supported"
328 msgstr "不支援Kerberos 5身份驗證"
329
330 # fe-auth.c:608
331 #: fe-auth.c:1049
332 #, c-format
333 msgid "GSSAPI authentication not supported"
334 msgstr "不支援GSSAPI身份驗證"
335
336 # fe-auth.c:608
337 #: fe-auth.c:1080
338 #, c-format
339 msgid "SSPI authentication not supported"
340 msgstr "不支援SSPI身份驗證"
341
342 # fe-auth.c:608
343 #: fe-auth.c:1087
344 #, c-format
345 msgid "Crypt authentication not supported"
346 msgstr "不支援Crypt身份驗證"
347
348 # fe-auth.c:655
349 #: fe-auth.c:1151
350 #, c-format
351 msgid "authentication method %u not supported"
352 msgstr "不支援身份驗證方法 %u"
353
354 # port/win32/security.c:39
355 #: fe-auth.c:1197
356 #, c-format
357 msgid "user name lookup failure: error code %lu"
358 msgstr "使用者名稱查找失敗: 錯誤碼 %lu"
359
360 #: fe-auth.c:1321
361 #, c-format
362 msgid "unexpected shape of result set returned for SHOW"
363 msgstr "SHOW 回傳的結果集格式與預期不符"
364
365 #: fe-auth.c:1329
366 #, c-format
367 msgid "password_encryption value too long"
368 msgstr "password_encryption值過長"
369
370 # access/transam/xlog.c:3720
371 #: fe-auth.c:1379
372 #, c-format
373 msgid "unrecognized password encryption algorithm \"%s\""
374 msgstr "無法識別的密碼加密演算法 \"%s\""
375
376 # fe-connect.c:946
377 #: fe-connect.c:1132
378 #, c-format
379 msgid "could not match %d host names to %d hostaddr values"
380 msgstr "無法將 %d 主機名稱對應到 %d hostaddr值"
381
382 #: fe-connect.c:1212
383 #, c-format
384 msgid "could not match %d port numbers to %d hosts"
385 msgstr "無法將 %d 連接埠對應到 %d 主機"
386
387 #: fe-connect.c:1337
388 #, c-format
389 msgid "negative require_auth method \"%s\" cannot be mixed with non-negative methods"
390 msgstr ""
391
392 #: fe-connect.c:1350
393 #, c-format
394 msgid "require_auth method \"%s\" cannot be mixed with negative methods"
395 msgstr ""
396
397 # utils/adt/network.c:105
398 #: fe-connect.c:1410 fe-connect.c:1461 fe-connect.c:1503 fe-connect.c:1559
399 #: fe-connect.c:1567 fe-connect.c:1598 fe-connect.c:1644 fe-connect.c:1684
400 #: fe-connect.c:1705
401 #, c-format
402 msgid "invalid %s value: \"%s\""
403 msgstr "無效的 %s 值: %s"
404
405 # commands/copy.c:2716 parser/parse_target.c:648 parser/parse_target.c:658
406 #: fe-connect.c:1443
407 #, c-format
408 msgid "require_auth method \"%s\" is specified more than once"
409 msgstr "require_auth方式\"%s\"被多次指定"
410
411 # fe-connect.c:472
412 #: fe-connect.c:1484 fe-connect.c:1523 fe-connect.c:1606
413 #, c-format
414 msgid "%s value \"%s\" invalid when SSL support is not compiled in"
415 msgstr "編譯未加上SSL支援時,%s 值 \"%s\" 無效"
416
417 #: fe-connect.c:1546
418 #, c-format
419 msgid "weak sslmode \"%s\" may not be used with sslrootcert=system (use \"verify-full\")"
420 msgstr "弱SSL模式\"%s\"不能與sslrootcert=system一起使用(用\"verify-full\")"
421
422 #: fe-connect.c:1584
423 #, c-format
424 msgid "invalid SSL protocol version range"
425 msgstr "SSL協議版本範圍無效"
426
427 # catalog/aclchk.c:758 commands/comment.c:1001 commands/functioncmds.c:451
428 # commands/proclang.c:202 commands/proclang.c:257 utils/adt/acl.c:2079
429 #: fe-connect.c:1621
430 #, c-format
431 msgid "%s value \"%s\" is not supported (check OpenSSL version)"
432 msgstr "不支援%s值\"%s\"(請檢查OpenSSL版本)"
433
434 # fe-connect.c:472
435 #: fe-connect.c:1651
436 #, c-format
437 msgid "gssencmode value \"%s\" invalid when GSSAPI support is not compiled in"
438 msgstr "編譯未加上GSSAPI支援時,gssencmode值\"%s\"無效"
439
440 # fe-connect.c:810
441 #: fe-connect.c:1944
442 #, c-format
443 msgid "could not set socket to TCP no delay mode: %s"
444 msgstr "無法將socket設定為TCP無延遲模式: %s"
445
446 #: fe-connect.c:2003
447 #, c-format
448 msgid "connection to server on socket \"%s\" failed: "
449 msgstr "透過 socket \"%s\" 連線至資料庫失敗: "
450
451 #: fe-connect.c:2029
452 #, c-format
453 msgid "connection to server at \"%s\" (%s), port %s failed: "
454 msgstr "連線至資料庫 \"%s\"(%s),連接埠 %s 失敗: "
455
456 #: fe-connect.c:2034
457 #, c-format
458 msgid "connection to server at \"%s\", port %s failed: "
459 msgstr "連線至資料庫 \"%s\",連接埠 %s 失敗: "
460
461 # fe-connect.c:841
462 #: fe-connect.c:2057
463 #, c-format
464 msgid "\tIs the server running locally and accepting connections on that socket?"
465 msgstr "\t伺服器是否在本地執行並接受socket連線?"
466
467 # fe-connect.c:853
468 #: fe-connect.c:2059
469 #, c-format
470 msgid "\tIs the server running on that host and accepting TCP/IP connections?"
471 msgstr "\t伺服器是否在該主機上執行並接受TCP/IP連線?"
472
473 # utils/adt/formatting.c:2044
474 #: fe-connect.c:2122
475 #, c-format
476 msgid "invalid integer value \"%s\" for connection option \"%s\""
477 msgstr "連接選項 \"%s\" 的整數值 \"%s\" 無效"
478
479 # fe-misc.c:991
480 #: fe-connect.c:2151 fe-connect.c:2185 fe-connect.c:2220 fe-connect.c:2318
481 #: fe-connect.c:2973
482 #, c-format
483 msgid "%s(%s) failed: %s"
484 msgstr "%s(%s) 失敗: %s"
485
486 #: fe-connect.c:2284
487 #, c-format
488 msgid "%s(%s) failed: error code %d"
489 msgstr "%s(%s) 失敗: 錯誤碼 %d"
490
491 # fe-connect.c:1154
492 #: fe-connect.c:2597
493 #, c-format
494 msgid "invalid connection state, probably indicative of memory corruption"
495 msgstr "連線狀態無效,可能是記憶體損壞"
496
497 # commands/user.c:240 commands/user.c:371
498 #: fe-connect.c:2676
499 #, c-format
500 msgid "invalid port number: \"%s\""
501 msgstr "連接埠無效: \"%s\""
502
503 # fe-connect.c:946
504 #: fe-connect.c:2690
505 #, c-format
506 msgid "could not translate host name \"%s\" to address: %s"
507 msgstr "無法將主機名稱 \"%s\" 轉譯成位址: %s"
508
509 # libpq/hba.c:1380
510 #: fe-connect.c:2702
511 #, c-format
512 msgid "could not parse network address \"%s\": %s"
513 msgstr "無法解析網路位址 \"%s\": %s"
514
515 #: fe-connect.c:2713
516 #, c-format
517 msgid "Unix-domain socket path \"%s\" is too long (maximum %d bytes)"
518 msgstr "Unix-domain socket路徑\"%s\"太長(最多 %d 個位元組)"
519
520 # fe-connect.c:950
521 #: fe-connect.c:2727
522 #, c-format
523 msgid "could not translate Unix-domain socket path \"%s\" to address: %s"
524 msgstr "無法將Unix-domain socket 路徑 \"%s\" 轉譯成位址: %s"
525
526 # fe-connect.c:1197
527 #: fe-connect.c:2901
528 #, c-format
529 msgid "could not create socket: %s"
530 msgstr "無法建立socket: %s"
531
532 # fe-connect.c:783
533 #: fe-connect.c:2932
534 #, c-format
535 msgid "could not set socket to nonblocking mode: %s"
536 msgstr "無法將socket設成非阻擋模式: %s"
537
538 # fe-auth.c:394
539 #: fe-connect.c:2943
540 #, c-format
541 msgid "could not set socket to close-on-exec mode: %s"
542 msgstr "無法將socket設成close-on-exec模式: %s"
543
544 #: fe-connect.c:2961
545 #, c-format
546 msgid "keepalives parameter must be an integer"
547 msgstr "keepalive參數必須是整數"
548
549 # fe-connect.c:1308
550 #: fe-connect.c:3100
551 #, c-format
552 msgid "could not get socket error status: %s"
553 msgstr "無法取得spclet錯誤狀態: %s"
554
555 # fe-connect.c:1347
556 #: fe-connect.c:3127
557 #, c-format
558 msgid "could not get client address from socket: %s"
559 msgstr "無法從socket取得客戶端位址: %s"
560
561 # commands/tablespace.c:386 commands/tablespace.c:483
562 #: fe-connect.c:3165
563 #, c-format
564 msgid "requirepeer parameter is not supported on this platform"
565 msgstr "此平臺不支援requirepeer參數"
566
567 # libpq/hba.c:1472 libpq/hba.c:1503 libpq/hba.c:1571
568 #: fe-connect.c:3167
569 #, c-format
570 msgid "could not get peer credentials: %s"
571 msgstr "無法取得對等憑證: %s"
572
573 #: fe-connect.c:3180
574 #, c-format
575 msgid "requirepeer specifies \"%s\", but actual peer user name is \"%s\""
576 msgstr "requirepeer指定為\"%s\",但實際對等使用者名稱是\"%s\""
577
578 # fe-connect.c:1392
579 #: fe-connect.c:3221
580 #, c-format
581 msgid "could not send GSSAPI negotiation packet: %s"
582 msgstr "無法傳送GSSAPI協商封包: %s"
583
584 #: fe-connect.c:3233
585 #, c-format
586 msgid "GSSAPI encryption required but was impossible (possibly no credential cache, no server support, or using a local socket)"
587 msgstr "需要GSSAPI加密但無法達成(可能沒有憑證快取、沒有伺服器支援或使用本機socket)"
588
589 # fe-connect.c:1392
590 #: fe-connect.c:3274
591 #, c-format
592 msgid "could not send SSL negotiation packet: %s"
593 msgstr "無法傳送SSL協商封包: %s"
594
595 # fe-connect.c:1427
596 #: fe-connect.c:3303
597 #, c-format
598 msgid "could not send startup packet: %s"
599 msgstr "無法傳送啟動封包: %s"
600
601 # fe-connect.c:1486
602 # fe-connect.c:1503
603 #: fe-connect.c:3378
604 #, c-format
605 msgid "server does not support SSL, but SSL was required"
606 msgstr "伺服器不支援 SSL,但 SSL 是必要的"
607
608 # fe-connect.c:1519
609 #: fe-connect.c:3404
610 #, c-format
611 msgid "received invalid response to SSL negotiation: %c"
612 msgstr "收到無效的SSL協商回應: %c"
613
614 #: fe-connect.c:3424
615 #, c-format
616 msgid "received unencrypted data after SSL response"
617 msgstr "在SSL回應後收到未加密的資料"
618
619 # fe-connect.c:1486
620 # fe-connect.c:1503
621 #: fe-connect.c:3504
622 #, c-format
623 msgid "server doesn't support GSSAPI encryption, but it was required"
624 msgstr "伺服器不支援GSSAPI加密,但這是必要條件"
625
626 # fe-connect.c:1519
627 #: fe-connect.c:3515
628 #, c-format
629 msgid "received invalid response to GSSAPI negotiation: %c"
630 msgstr "收到對GSSAPI協商的無效回應: %c"
631
632 #: fe-connect.c:3533
633 #, c-format
634 msgid "received unencrypted data after GSSAPI encryption response"
635 msgstr "在GSSAPI加密回應後收到未加密的資料"
636
637 # fe-connect.c:1576
638 # fe-connect.c:1608
639 #: fe-connect.c:3598
640 #, c-format
641 msgid "expected authentication request from server, but received %c"
642 msgstr "預期從伺服器收到身份驗證請求,但收到%c"
643
644 #: fe-connect.c:3625 fe-connect.c:3794
645 #, c-format
646 msgid "received invalid authentication request"
647 msgstr "收到無效的身份驗證請求"
648
649 # fe-connect.c:1519
650 #: fe-connect.c:3630 fe-connect.c:3779
651 #, c-format
652 msgid "received invalid protocol negotiation message"
653 msgstr "收到無效的協定協商訊息"
654
655 # libpq/pqformat.c:671
656 #: fe-connect.c:3648 fe-connect.c:3702
657 #, c-format
658 msgid "received invalid error message"
659 msgstr "收到無效的錯誤訊息"
660
661 # fe-connect.c:1844
662 #: fe-connect.c:3865
663 #, c-format
664 msgid "unexpected message from server during startup"
665 msgstr "啟動過程中從自伺服器收到非預期訊息"
666
667 # commands/copy.c:905 executor/execMain.c:443 tcop/utility.c:323
668 #: fe-connect.c:3956
669 #, c-format
670 msgid "session is read-only"
671 msgstr "工作階段是唯讀模式"
672
673 # commands/copy.c:905 executor/execMain.c:443 tcop/utility.c:323
674 #: fe-connect.c:3958
675 #, c-format
676 msgid "session is not read-only"
677 msgstr "工作階段不是唯讀模式"
678
679 #: fe-connect.c:4011
680 #, c-format
681 msgid "server is in hot standby mode"
682 msgstr "伺服器處於熱備援模式"
683
684 #: fe-connect.c:4013
685 #, c-format
686 msgid "server is not in hot standby mode"
687 msgstr "伺服器未處於熱備援模式"
688
689 #: fe-connect.c:4129 fe-connect.c:4179
690 #, c-format
691 msgid "\"%s\" failed"
692 msgstr "\"%s\"失敗"
693
694 # fe-connect.c:1914
695 #: fe-connect.c:4193
696 #, c-format
697 msgid "invalid connection state %d, probably indicative of memory corruption"
698 msgstr "無效的連線狀態 %d,可能指示記憶體損壞"
699
700 #: fe-connect.c:5174
701 #, c-format
702 msgid "invalid LDAP URL \"%s\": scheme must be ldap://"
703 msgstr "無效的LDAP URL \"%s\": scheme必須是 ldap://"
704
705 #: fe-connect.c:5189
706 #, c-format
707 msgid "invalid LDAP URL \"%s\": missing distinguished name"
708 msgstr "無效的LDAP URL \"%s\": 缺少識別名稱"
709
710 #: fe-connect.c:5201 fe-connect.c:5259
711 #, c-format
712 msgid "invalid LDAP URL \"%s\": must have exactly one attribute"
713 msgstr "無效的LDAP URL \"%s\": 只能有一個屬性"
714
715 #: fe-connect.c:5213 fe-connect.c:5275
716 #, c-format
717 msgid "invalid LDAP URL \"%s\": must have search scope (base/one/sub)"
718 msgstr "無效的LDAP URL \"%s\": 必須有搜尋範圍(base/one/sub)"
719
720 #: fe-connect.c:5225
721 #, c-format
722 msgid "invalid LDAP URL \"%s\": no filter"
723 msgstr "無效的LDAP URL \"%s\": 沒有過濾條件"
724
725 #: fe-connect.c:5247
726 #, c-format
727 msgid "invalid LDAP URL \"%s\": invalid port number"
728 msgstr "無效的LDAP URL \"%s\": 連接埠無效"
729
730 # fe-secure.c:932
731 #: fe-connect.c:5284
732 #, c-format
733 msgid "could not create LDAP structure"
734 msgstr "無法建立LDAP結構"
735
736 #: fe-connect.c:5359
737 #, c-format
738 msgid "lookup on LDAP server failed: %s"
739 msgstr "在LDAP伺服器上查找失敗: %s"
740
741 #: fe-connect.c:5369
742 #, c-format
743 msgid "more than one entry found on LDAP lookup"
744 msgstr "LDAP 查找時找到多個項目"
745
746 #: fe-connect.c:5371 fe-connect.c:5382
747 #, c-format
748 msgid "no entry found on LDAP lookup"
749 msgstr "LDAP 查找時找不到項目"
750
751 #: fe-connect.c:5392 fe-connect.c:5404
752 #, c-format
753 msgid "attribute has no values on LDAP lookup"
754 msgstr "LDAP 查找時屬性沒有值"
755
756 # fe-connect.c:2592
757 #: fe-connect.c:5455 fe-connect.c:5474 fe-connect.c:5998
758 #, c-format
759 msgid "missing \"=\" after \"%s\" in connection info string"
760 msgstr "連線字串裡的 \"%s\" 後面缺少 \"=\""
761
762 # fe-connect.c:2675
763 #: fe-connect.c:5545 fe-connect.c:6181 fe-connect.c:6979
764 #, c-format
765 msgid "invalid connection option \"%s\""
766 msgstr "無效的連線選項 \"%s\""
767
768 # fe-connect.c:2641
769 #: fe-connect.c:5560 fe-connect.c:6046
770 #, c-format
771 msgid "unterminated quoted string in connection info string"
772 msgstr "連接字串中的引號未結束"
773
774 #: fe-connect.c:5640
775 #, c-format
776 msgid "definition of service \"%s\" not found"
777 msgstr "找不到服務 \"%s\" 的定義"
778
779 #: fe-connect.c:5666
780 #, c-format
781 msgid "service file \"%s\" not found"
782 msgstr "找不到服務檔 \"%s\""
783
784 #: fe-connect.c:5679
785 #, c-format
786 msgid "line %d too long in service file \"%s\""
787 msgstr "服務檔 \"%2$s\" 第 %1$d 行太長"
788
789 # guc-file.l:267
790 #: fe-connect.c:5750 fe-connect.c:5793
791 #, c-format
792 msgid "syntax error in service file \"%s\", line %d"
793 msgstr "服務檔 \"%s\" 第 %d 行語法錯誤"
794
795 # guc-file.l:267
796 #: fe-connect.c:5761
797 #, c-format
798 msgid "nested service specifications not supported in service file \"%s\", line %d"
799 msgstr "服務檔 \"%s\" 第 %d 行不支援巢狀服務規格"
800
801 #: fe-connect.c:6500
802 #, c-format
803 msgid "invalid URI propagated to internal parser routine: \"%s\""
804 msgstr "無效的 URI 被傳到內部解析器routine: \"%s\""
805
806 #: fe-connect.c:6577
807 #, c-format
808 msgid "end of string reached when looking for matching \"]\" in IPv6 host address in URI: \"%s\""
809 msgstr "尋找 URI 中 IPv6 主機位址的對應 \"]\" 時到達字串結尾: \"%s\""
810
811 #: fe-connect.c:6584
812 #, c-format
813 msgid "IPv6 host address may not be empty in URI: \"%s\""
814 msgstr "URI 中 IPv6 主機位址不得為空: \"%s\""
815
816 #: fe-connect.c:6599
817 #, c-format
818 msgid "unexpected character \"%c\" at position %d in URI (expected \":\" or \"/\"): \"%s\""
819 msgstr "URI 的位置 %2$d 發現非預期字元 \"%1$c\"(預期為 \":\" 或 \"/\"): \"%3$s\""
820
821 #: fe-connect.c:6728
822 #, c-format
823 msgid "extra key/value separator \"=\" in URI query parameter: \"%s\""
824 msgstr "URI 查詢參數有多餘的鍵/值分隔符號 \"=\": \"%s\""
825
826 #: fe-connect.c:6748
827 #, c-format
828 msgid "missing key/value separator \"=\" in URI query parameter: \"%s\""
829 msgstr "URI 查詢參數缺少鍵/值分隔符號 \"=\": \"%s\""
830
831 # utils/misc/guc.c:3792
832 #: fe-connect.c:6800
833 #, c-format
834 msgid "invalid URI query parameter: \"%s\""
835 msgstr "無效的 URI 查詢參數: \"%s\""
836
837 # utils/mb/mbutils.c:326
838 #: fe-connect.c:6874
839 #, c-format
840 msgid "invalid percent-encoded token: \"%s\""
841 msgstr "無效的百分比編碼標記: \"%s\""
842
843 #: fe-connect.c:6884
844 #, c-format
845 msgid "forbidden value %%00 in percent-encoded value: \"%s\""
846 msgstr "百分比編碼值中禁止使用 %%00: \"%s\""
847
848 # fe-connect.c:2897
849 #: fe-connect.c:7248
850 msgid "connection pointer is NULL\n"
851 msgstr "連線指標是 NULL\n"
852
853 # fe-connect.c:1414
854 # fe-connect.c:2544
855 # fe-connect.c:2553
856 # fe-connect.c:3132
857 # fe-lobj.c:556
858 # fe-protocol2.c:1007
859 # fe-protocol3.c:958
860 #: fe-connect.c:7256 fe-exec.c:710 fe-exec.c:970 fe-exec.c:3292
861 #: fe-protocol3.c:974 fe-protocol3.c:1007
862 msgid "out of memory\n"
863 msgstr "記憶體不足\n"
864
865 #: fe-connect.c:7547
866 #, c-format
867 msgid "WARNING: password file \"%s\" is not a plain file\n"
868 msgstr "警告: 密碼檔 \"%s\" 不是純文字檔\n"
869
870 # fe-connect.c:3154
871 #: fe-connect.c:7556
872 #, c-format
873 msgid "WARNING: password file \"%s\" has group or world access; permissions should be u=rw (0600) or less\n"
874 msgstr "警告: 密碼檔 \"%s\" 有群組或全域存取權限,權限應為 u=rw (0600) 或更低的權限\n"
875
876 # utils/init/miscinit.c:792 utils/misc/guc.c:5074
877 #: fe-connect.c:7663
878 #, c-format
879 msgid "password retrieved from file \"%s\""
880 msgstr "從檔案 \"%s\" 取得密碼"
881
882 # fe-exec.c:1922
883 #: fe-exec.c:466 fe-exec.c:3366
884 #, c-format
885 msgid "row number %d is out of range 0..%d"
886 msgstr "列號 %d 超出範圍 0..%d"
887
888 # commands/vacuum.c:2258 commands/vacuumlazy.c:489 commands/vacuumlazy.c:770
889 # nodes/print.c:86 storage/lmgr/deadlock.c:888 tcop/postgres.c:3285
890 #: fe-exec.c:528 fe-protocol3.c:1976
891 #, c-format
892 msgid "%s"
893 msgstr "%s"
894
895 #: fe-exec.c:831
896 #, c-format
897 msgid "write to server failed"
898 msgstr "寫入伺服器失敗"
899
900 # storage/buffer/localbuf.c:103
901 #: fe-exec.c:869
902 #, c-format
903 msgid "no error text available"
904 msgstr "無錯誤文字可用"
905
906 # fe-exec.c:484
907 #: fe-exec.c:958
908 msgid "NOTICE"
909 msgstr "注意"
910
911 #: fe-exec.c:1016
912 msgid "PGresult cannot support more than INT_MAX tuples"
913 msgstr "PGresult 不能支援超過 INT_MAX 個 tuple"
914
915 #: fe-exec.c:1028
916 msgid "size_t overflow"
917 msgstr "size_t 溢位"
918
919 # fe-exec.c:653
920 # fe-exec.c:705
921 # fe-exec.c:745
922 #: fe-exec.c:1444 fe-exec.c:1513 fe-exec.c:1559
923 #, c-format
924 msgid "command string is a null pointer"
925 msgstr "命令字串是空指標"
926
927 # translator: %s is a SQL statement name
928 # executor/functions.c:124 executor/spi.c:1396
929 #: fe-exec.c:1450 fe-exec.c:2888
930 #, c-format
931 msgid "%s not allowed in pipeline mode"
932 msgstr "管道模式不允許 %s"
933
934 # utils/adt/timestamp.c:882
935 #: fe-exec.c:1518 fe-exec.c:1564 fe-exec.c:1658
936 #, c-format
937 msgid "number of parameters must be between 0 and %d"
938 msgstr "參數數量必須在 0 和 %d 之間"
939
940 # fe-exec.c:738
941 # fe-exec.c:828
942 #: fe-exec.c:1554 fe-exec.c:1653
943 #, c-format
944 msgid "statement name is a null pointer"
945 msgstr "陳述式名稱是空指標"
946
947 # fe-exec.c:859
948 #: fe-exec.c:1695 fe-exec.c:3220
949 #, c-format
950 msgid "no connection to the server"
951 msgstr "未連接到伺服器"
952
953 # fe-exec.c:866
954 #: fe-exec.c:1703 fe-exec.c:3228
955 #, c-format
956 msgid "another command is already in progress"
957 msgstr "另一個命令正在執行中"
958
959 #: fe-exec.c:1733
960 #, c-format
961 msgid "cannot queue commands during COPY"
962 msgstr "COPY 過程中無法排隊等候命令"
963
964 #: fe-exec.c:1850
965 #, c-format
966 msgid "length must be given for binary parameter"
967 msgstr "必須提供長度給binary參數"
968
969 # fe-exec.c:1204
970 #: fe-exec.c:2171
971 #, c-format
972 msgid "unexpected asyncStatus: %d"
973 msgstr "非預期的 asyncStatus: %d"
974
975 #: fe-exec.c:2327
976 #, c-format
977 msgid "synchronous command execution functions are not allowed in pipeline mode"
978 msgstr "管道模式中不允許同步命令執行函數"
979
980 # fe-exec.c:1331
981 #: fe-exec.c:2344
982 msgid "COPY terminated by new PQexec"
983 msgstr "COPY 被新的 PQexec 終止"
984
985 # fe-protocol3.c:1000
986 #: fe-exec.c:2360
987 #, c-format
988 msgid "PQexec not allowed during COPY BOTH"
989 msgstr "COPY BOTH 過程中不允許 PQexec"
990
991 # fe-exec.c:1469
992 # fe-exec.c:1534
993 # fe-exec.c:1619
994 # fe-protocol2.c:1153
995 # fe-protocol3.c:1115
996 #: fe-exec.c:2586 fe-exec.c:2641 fe-exec.c:2709 fe-protocol3.c:1907
997 #, c-format
998 msgid "no COPY in progress"
999 msgstr "沒有進行中的 COPY"
1000
1001 # fe-exec.c:1811
1002 #: fe-exec.c:2895
1003 #, c-format
1004 msgid "connection in wrong state"
1005 msgstr "連線處於錯誤狀態"
1006
1007 # fe-lobj.c:674
1008 #: fe-exec.c:2938
1009 #, c-format
1010 msgid "cannot enter pipeline mode, connection not idle"
1011 msgstr "無法進入管道模式,連線未處於閒置狀態"
1012
1013 #: fe-exec.c:2974 fe-exec.c:2995
1014 #, c-format
1015 msgid "cannot exit pipeline mode with uncollected results"
1016 msgstr "無法退出管道模式,尚有未收集的結果"
1017
1018 #: fe-exec.c:2978
1019 #, c-format
1020 msgid "cannot exit pipeline mode while busy"
1021 msgstr "忙碌時無法退出管道模式"
1022
1023 #: fe-exec.c:2989
1024 #, c-format
1025 msgid "cannot exit pipeline mode while in COPY"
1026 msgstr "進行 COPY 時無法退出管道模式"
1027
1028 #: fe-exec.c:3154
1029 #, c-format
1030 msgid "cannot send pipeline when not in pipeline mode"
1031 msgstr "不在管道模式下無法傳送管道"
1032
1033 # fe-exec.c:1842
1034 #: fe-exec.c:3255
1035 msgid "invalid ExecStatusType code"
1036 msgstr "無效的 ExecStatusType 碼"
1037
1038 # utils/adt/float.c:1508 utils/adt/float.c:1538
1039 #: fe-exec.c:3282
1040 msgid "PGresult is not an error result\n"
1041 msgstr "PGresult 不是錯誤結果\n"
1042
1043 # fe-exec.c:1906
1044 # fe-exec.c:1929
1045 #: fe-exec.c:3350 fe-exec.c:3373
1046 #, c-format
1047 msgid "column number %d is out of range 0..%d"
1048 msgstr "欄號 %d 超出範圍 0..%d"
1049
1050 # fe-exec.c:1922
1051 #: fe-exec.c:3388
1052 #, c-format
1053 msgid "parameter number %d is out of range 0..%d"
1054 msgstr "參數編號 %d 超出範圍 0..%d"
1055
1056 # fe-exec.c:2204
1057 #: fe-exec.c:3699
1058 #, c-format
1059 msgid "could not interpret result from server: %s"
1060 msgstr "無法解釋來自伺服器的結果: %s"
1061
1062 # postmaster/postmaster.c:1256 postmaster/postmaster.c:1287
1063 #: fe-exec.c:3964 fe-exec.c:4054
1064 #, c-format
1065 msgid "incomplete multibyte character"
1066 msgstr "不完整的多位元組字元"
1067
1068 #: fe-gssapi-common.c:122
1069 msgid "GSSAPI name import error"
1070 msgstr "GSSAPI 名稱匯入錯誤"
1071
1072 # fe-lobj.c:646
1073 #: fe-lobj.c:144 fe-lobj.c:207 fe-lobj.c:397 fe-lobj.c:487 fe-lobj.c:560
1074 #: fe-lobj.c:956 fe-lobj.c:963 fe-lobj.c:970 fe-lobj.c:977 fe-lobj.c:984
1075 #: fe-lobj.c:991 fe-lobj.c:998 fe-lobj.c:1005
1076 #, c-format
1077 msgid "cannot determine OID of function %s"
1078 msgstr "無法確定函數 %s 的 OID"
1079
1080 #: fe-lobj.c:160
1081 #, c-format
1082 msgid "argument of lo_truncate exceeds integer range"
1083 msgstr "lo_truncate 的參數超出整數範圍"
1084
1085 #: fe-lobj.c:262
1086 #, c-format
1087 msgid "argument of lo_read exceeds integer range"
1088 msgstr "lo_read 的參數超出整數範圍"
1089
1090 #: fe-lobj.c:313
1091 #, c-format
1092 msgid "argument of lo_write exceeds integer range"
1093 msgstr "lo_write 的參數超出整數範圍"
1094
1095 # fe-lobj.c:410
1096 # fe-lobj.c:495
1097 #: fe-lobj.c:669 fe-lobj.c:780
1098 #, c-format
1099 msgid "could not open file \"%s\": %s"
1100 msgstr "無法開啟檔案 \"%s\":%s"
1101
1102 # utils/init/miscinit.c:792 utils/misc/guc.c:5074
1103 #: fe-lobj.c:725
1104 #, c-format
1105 msgid "could not read from file \"%s\": %s"
1106 msgstr "無法從檔案 %s 讀取: %s"
1107
1108 # access/transam/xlog.c:1555 access/transam/xlog.c:1679
1109 # access/transam/xlog.c:2964 access/transam/xlog.c:3002 commands/copy.c:1117
1110 # commands/tablespace.c:668 commands/tablespace.c:674
1111 # postmaster/postmaster.c:3430 utils/init/miscinit.c:832
1112 # utils/init/miscinit.c:841 utils/misc/guc.c:4934 utils/misc/guc.c:4998
1113 #: fe-lobj.c:801 fe-lobj.c:824
1114 #, c-format
1115 msgid "could not write to file \"%s\": %s"
1116 msgstr "無法寫入檔案 \"%s\": %s"
1117
1118 # fe-lobj.c:601
1119 #: fe-lobj.c:908
1120 #, c-format
1121 msgid "query to initialize large object functions did not return data"
1122 msgstr "初始化大物件函數的查詢沒有回傳資料"
1123
1124 # fe-misc.c:228
1125 #: fe-misc.c:240
1126 #, c-format
1127 msgid "integer of size %lu not supported by pqGetInt"
1128 msgstr "pqGetInt 不支援大小為 %lu 的整數"
1129
1130 # fe-misc.c:264
1131 #: fe-misc.c:273
1132 #, c-format
1133 msgid "integer of size %lu not supported by pqPutInt"
1134 msgstr "pqPutInt 不支援大小為 %lu 的整數"
1135
1136 # fe-misc.c:544
1137 # fe-misc.c:748
1138 #: fe-misc.c:573
1139 #, c-format
1140 msgid "connection not open"
1141 msgstr "連線未開啟"
1142
1143 # fe-misc.c:718
1144 # fe-misc.c:786
1145 #: fe-misc.c:751 fe-secure-openssl.c:215 fe-secure-openssl.c:315
1146 #: fe-secure.c:257 fe-secure.c:419
1147 #, c-format
1148 msgid ""
1149 "server closed the connection unexpectedly\n"
1150 "\tThis probably means the server terminated abnormally\n"
1151 "\tbefore or while processing the request."
1152 msgstr ""
1153 "伺服器意外關閉連線\n"
1154 "\t這可能表示伺服器在處理請求之前或期間異常中止。"
1155
1156 # fe-misc.c:544
1157 # fe-misc.c:748
1158 #: fe-misc.c:818
1159 msgid "connection not open\n"
1160 msgstr "連線未開啟\n"
1161
1162 # fe-misc.c:923
1163 #: fe-misc.c:1003
1164 #, c-format
1165 msgid "timeout expired"
1166 msgstr "逾時過期"
1167
1168 # utils/adt/encode.c:307
1169 #: fe-misc.c:1047
1170 #, c-format
1171 msgid "invalid socket"
1172 msgstr "無效的 socket"
1173
1174 # fe-misc.c:991
1175 #: fe-misc.c:1069
1176 #, c-format
1177 msgid "%s() failed: %s"
1178 msgstr "%s() 失敗: %s"
1179
1180 # fe-protocol2.c:423
1181 # fe-protocol3.c:183
1182 #: fe-protocol3.c:182
1183 #, c-format
1184 msgid "message type 0x%02x arrived from server while idle"
1185 msgstr "閒置時收到伺服器送來類型為 0x%02x 的訊息"
1186
1187 # fe-protocol2.c:517
1188 #: fe-protocol3.c:385
1189 #, c-format
1190 msgid "server sent data (\"D\" message) without prior row description (\"T\" message)"
1191 msgstr "伺服器在先前未傳送列描述(\"T\" 訊息)的情況下傳送資料(\"D\" 訊息)"
1192
1193 # fe-protocol2.c:548
1194 # fe-protocol3.c:344
1195 #: fe-protocol3.c:427
1196 #, c-format
1197 msgid "unexpected response from server; first received character was \"%c\""
1198 msgstr "非預期的伺服器回應,第一個收到的字元是 \"%c\""
1199
1200 # fe-protocol3.c:365
1201 #: fe-protocol3.c:450
1202 #, c-format
1203 msgid "message contents do not agree with length in message type \"%c\""
1204 msgstr "訊息內容與訊息類型 \"%c\" 中的長度不一致"
1205
1206 # fe-protocol3.c:386
1207 #: fe-protocol3.c:468
1208 #, c-format
1209 msgid "lost synchronization with server: got message type \"%c\", length %d"
1210 msgstr "與伺服器失去同步: 收到訊息類型 \"%c\",長度 %d"
1211
1212 # libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630
1213 # utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523
1214 #: fe-protocol3.c:520 fe-protocol3.c:560
1215 msgid "insufficient data in \"T\" message"
1216 msgstr "\"T\" 訊息中的資料不足"
1217
1218 # fe-protocol2.c:760
1219 # fe-protocol3.c:577
1220 #: fe-protocol3.c:631 fe-protocol3.c:837
1221 msgid "out of memory for query result"
1222 msgstr "查詢結果記憶體不足"
1223
1224 # libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630
1225 # utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523
1226 #: fe-protocol3.c:700
1227 msgid "insufficient data in \"t\" message"
1228 msgstr "\"t\" 訊息中的資料不足"
1229
1230 # libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630
1231 # utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523
1232 #: fe-protocol3.c:759 fe-protocol3.c:791 fe-protocol3.c:809
1233 msgid "insufficient data in \"D\" message"
1234 msgstr "\"D\" 訊息中的資料不足"
1235
1236 # fe-protocol3.c:522
1237 #: fe-protocol3.c:765
1238 msgid "unexpected field count in \"D\" message"
1239 msgstr "\"D\" 訊息的欄位數與預期不同"
1240
1241 #: fe-protocol3.c:1020
1242 msgid "no error message available\n"
1243 msgstr "無法提供錯誤訊息\n"
1244
1245 # translator: %s represents a digit string
1246 # fe-protocol3.c:651
1247 # fe-protocol3.c:659
1248 #. translator: %s represents a digit string
1249 #: fe-protocol3.c:1068 fe-protocol3.c:1087
1250 #, c-format
1251 msgid " at character %s"
1252 msgstr " 於字元 %s"
1253
1254 # fe-protocol3.c:668
1255 #: fe-protocol3.c:1100
1256 #, c-format
1257 msgid "DETAIL: %s\n"
1258 msgstr "詳細資料: %s\n"
1259
1260 # fe-protocol3.c:671
1261 #: fe-protocol3.c:1103
1262 #, c-format
1263 msgid "HINT: %s\n"
1264 msgstr "提示: %s\n"
1265
1266 # fe-protocol3.c:674
1267 #: fe-protocol3.c:1106
1268 #, c-format
1269 msgid "QUERY: %s\n"
1270 msgstr "查詢: %s\n"
1271
1272 # fe-protocol3.c:677
1273 #: fe-protocol3.c:1113
1274 #, c-format
1275 msgid "CONTEXT: %s\n"
1276 msgstr "CONTEXT: %s\n"
1277
1278 # fe-protocol3.c:677
1279 #: fe-protocol3.c:1122
1280 #, c-format
1281 #| msgid "CONTEXT: %s\n"
1282 msgid "SCHEMA NAME: %s\n"
1283 msgstr "SCHEMA 名稱: %s\n"
1284
1285 # utils/error/elog.c:1555
1286 #: fe-protocol3.c:1126
1287 #, c-format
1288 #| msgid "STATEMENT: %s"
1289 msgid "TABLE NAME: %s\n"
1290 msgstr "資料表名稱: %s\n"
1291
1292 # fe-protocol3.c:677
1293 #: fe-protocol3.c:1130
1294 #, c-format
1295 msgid "COLUMN NAME: %s\n"
1296 msgstr "欄位名稱: %s\n"
1297
1298 # utils/error/elog.c:1555
1299 #: fe-protocol3.c:1134
1300 #, c-format
1301 msgid "DATATYPE NAME: %s\n"
1302 msgstr "資料型別名稱: %s\n"
1303
1304 # fe-protocol3.c:677
1305 #: fe-protocol3.c:1138
1306 #, c-format
1307 msgid "CONSTRAINT NAME: %s\n"
1308 msgstr "約束名稱: %s\n"
1309
1310 # fe-protocol3.c:689
1311 #: fe-protocol3.c:1150
1312 msgid "LOCATION: "
1313 msgstr "位置: "
1314
1315 # fe-protocol3.c:691
1316 #: fe-protocol3.c:1152
1317 #, c-format
1318 msgid "%s, "
1319 msgstr "%s, "
1320
1321 # fe-protocol3.c:693
1322 #: fe-protocol3.c:1154
1323 #, c-format
1324 msgid "%s:%s"
1325 msgstr "%s:%s"
1326
1327 #: fe-protocol3.c:1349
1328 #, c-format
1329 msgid "LINE %d: "
1330 msgstr "行 %d: "
1331
1332 # postmaster/postmaster.c:1349
1333 #: fe-protocol3.c:1423
1334 #, c-format
1335 msgid "protocol version not supported by server: client uses %u.%u, server supports up to %u.%u"
1336 msgstr "伺服器不支援的通訊協定版本: 客戶端使用 %u.%u,伺服器支援最高到 %u.%u"
1337
1338 # catalog/pg_proc.c:487
1339 #: fe-protocol3.c:1429
1340 #, c-format
1341 msgid "protocol extension not supported by server: %s"
1342 msgid_plural "protocol extensions not supported by server: %s"
1343 msgstr[0] "伺服器不支援的通訊協定擴展: %s"
1344
1345 # libpq/pqformat.c:671
1346 #: fe-protocol3.c:1437
1347 #, c-format
1348 msgid "invalid %s message"
1349 msgstr "無效的 %s 訊息"
1350
1351 # fe-protocol3.c:1000
1352 #: fe-protocol3.c:1802
1353 #, c-format
1354 msgid "PQgetline: not doing text COPY OUT"
1355 msgstr "PQgetline: 不執行文字 COPY OUT"
1356
1357 #: fe-protocol3.c:2176
1358 #, c-format
1359 msgid "protocol error: no function result"
1360 msgstr "通訊協定錯誤: 無函數結果"
1361
1362 # fe-protocol2.c:1343
1363 # fe-protocol2.c:1375
1364 # fe-protocol3.c:1387
1365 #: fe-protocol3.c:2187
1366 #, c-format
1367 msgid "protocol error: id=0x%x"
1368 msgstr "通訊協定錯誤: ID=0x%x"
1369
1370 #: fe-secure-common.c:123
1371 #, c-format
1372 msgid "SSL certificate's name contains embedded null"
1373 msgstr "SSL 憑證的名稱包含嵌入的空字符"
1374
1375 #: fe-secure-common.c:228
1376 #, c-format
1377 msgid "certificate contains IP address with invalid length %zu"
1378 msgstr "憑證包含具有無效長度 %zu 的IP位址"
1379
1380 # libpq/be-secure.c:659
1381 #: fe-secure-common.c:237
1382 #, c-format
1383 msgid "could not convert certificate's IP address to string: %s"
1384 msgstr "無法將憑證的IP位址轉成字串: %s"
1385
1386 # commands/aggregatecmds.c:111
1387 #: fe-secure-common.c:269
1388 #, c-format
1389 msgid "host name must be specified for a verified SSL connection"
1390 msgstr "必須為已驗證的SSL連線指定主機名稱"
1391
1392 # fe-secure.c:580
1393 #: fe-secure-common.c:286
1394 #, c-format
1395 msgid "server certificate for \"%s\" (and %d other name) does not match host name \"%s\""
1396 msgid_plural "server certificate for \"%s\" (and %d other names) does not match host name \"%s\""
1397 msgstr[0] "伺服器憑證的名稱 \"%s\"(以及其他 %d 個名稱)與主機名稱 \"%s\" 不一致"
1398
1399 # fe-secure.c:580
1400 #: fe-secure-common.c:294
1401 #, c-format
1402 msgid "server certificate for \"%s\" does not match host name \"%s\""
1403 msgstr "伺服器憑證的名稱 \"%s\" 與主機名稱 \"%s\" 不一致"
1404
1405 # fe-misc.c:610
1406 # fe-misc.c:701
1407 #: fe-secure-common.c:299
1408 #, c-format
1409 msgid "could not get server's host name from server certificate"
1410 msgstr "無法從伺服器憑證取得伺服器的主機名稱"
1411
1412 #: fe-secure-gssapi.c:201
1413 msgid "GSSAPI wrap error"
1414 msgstr "GSSAPI 封裝錯誤"
1415
1416 #: fe-secure-gssapi.c:208
1417 #, c-format
1418 msgid "outgoing GSSAPI message would not use confidentiality"
1419 msgstr "傳出的 GSSAPI 訊息將不使用機密性"
1420
1421 #: fe-secure-gssapi.c:215
1422 #, c-format
1423 msgid "client tried to send oversize GSSAPI packet (%zu > %zu)"
1424 msgstr "客戶端嘗試發送過大的 GSSAPI 封包(%zu > %zu)"
1425
1426 #: fe-secure-gssapi.c:351 fe-secure-gssapi.c:593
1427 #, c-format
1428 msgid "oversize GSSAPI packet sent by the server (%zu > %zu)"
1429 msgstr "伺服器發送的 GSSAPI 封包過大(%zu > %zu)"
1430
1431 #: fe-secure-gssapi.c:390
1432 msgid "GSSAPI unwrap error"
1433 msgstr "GSSAPI 解封錯誤"
1434
1435 #: fe-secure-gssapi.c:399
1436 #, c-format
1437 msgid "incoming GSSAPI message did not use confidentiality"
1438 msgstr "傳入的 GSSAPI 訊息未使用機密性"
1439
1440 # libpq/be-secure.c:649
1441 #: fe-secure-gssapi.c:656
1442 msgid "could not initiate GSSAPI security context"
1443 msgstr "無法初始化 SSPI 安全性 context"
1444
1445 #: fe-secure-gssapi.c:685
1446 msgid "GSSAPI size check error"
1447 msgstr "GSSAPI 大小檢查錯誤"
1448
1449 #: fe-secure-gssapi.c:696
1450 msgid "GSSAPI context establishment error"
1451 msgstr "GSSAPI 建立 context 錯誤"
1452
1453 # fe-secure.c:330
1454 # fe-secure.c:415
1455 # fe-secure.c:1038
1456 #: fe-secure-openssl.c:219 fe-secure-openssl.c:319 fe-secure-openssl.c:1531
1457 #, c-format
1458 msgid "SSL SYSCALL error: %s"
1459 msgstr "SSL SYSCALL 錯誤: %s"
1460
1461 # libpq/be-secure.c:286 libpq/be-secure.c:379
1462 #: fe-secure-openssl.c:225 fe-secure-openssl.c:325 fe-secure-openssl.c:1534
1463 #, c-format
1464 msgid "SSL SYSCALL error: EOF detected"
1465 msgstr "SSL SYSCALL 錯誤: 偵測到 EOF"
1466
1467 # libpq/be-secure.c:294 libpq/be-secure.c:387
1468 #: fe-secure-openssl.c:235 fe-secure-openssl.c:335 fe-secure-openssl.c:1542
1469 #, c-format
1470 msgid "SSL error: %s"
1471 msgstr "SSL 錯誤: %s"
1472
1473 #: fe-secure-openssl.c:249 fe-secure-openssl.c:349
1474 #, c-format
1475 msgid "SSL connection has been closed unexpectedly"
1476 msgstr "SSL 連線意外關閉"
1477
1478 # libpq/be-secure.c:303 libpq/be-secure.c:396
1479 #: fe-secure-openssl.c:254 fe-secure-openssl.c:354 fe-secure-openssl.c:1589
1480 #, c-format
1481 msgid "unrecognized SSL error code: %d"
1482 msgstr "無法識別的 SSL 錯誤碼: %d"
1483
1484 # libpq/be-secure.c:659
1485 #: fe-secure-openssl.c:397
1486 #, c-format
1487 msgid "could not determine server certificate signature algorithm"
1488 msgstr "無法確定伺服器憑證的簽名演算法"
1489
1490 #: fe-secure-openssl.c:417
1491 #, c-format
1492 msgid "could not find digest for NID %s"
1493 msgstr "找不到 NID %s 的摘要"
1494
1495 # libpq/hba.c:1472 libpq/hba.c:1503 libpq/hba.c:1571
1496 #: fe-secure-openssl.c:426
1497 #, c-format
1498 msgid "could not generate peer certificate hash"
1499 msgstr "無法生成對等憑證的雜湊值"
1500
1501 #: fe-secure-openssl.c:509
1502 #, c-format
1503 msgid "SSL certificate's name entry is missing"
1504 msgstr "SSL 憑證缺少名稱項目"
1505
1506 #: fe-secure-openssl.c:543
1507 #, c-format
1508 msgid "SSL certificate's address entry is missing"
1509 msgstr "SSL 憑證缺少位址項目"
1510
1511 # libpq/be-secure.c:649
1512 #: fe-secure-openssl.c:960
1513 #, c-format
1514 msgid "could not create SSL context: %s"
1515 msgstr "無法建立 SSL context: %s"
1516
1517 # utils/adt/formatting.c:2044
1518 #: fe-secure-openssl.c:1002
1519 #, c-format
1520 msgid "invalid value \"%s\" for minimum SSL protocol version"
1521 msgstr "無效的最小 SSL 通訊協定版本值 \"%s\""
1522
1523 # port/win32/security.c:39
1524 #: fe-secure-openssl.c:1012
1525 #, c-format
1526 msgid "could not set minimum SSL protocol version: %s"
1527 msgstr "無法設定最小 SSL 通訊協定版本: %s"
1528
1529 # utils/adt/formatting.c:2044
1530 #: fe-secure-openssl.c:1028
1531 #, c-format
1532 msgid "invalid value \"%s\" for maximum SSL protocol version"
1533 msgstr "無效的最大 SSL 通訊協定版本值 \"%s\""
1534
1535 # port/win32/security.c:39
1536 #: fe-secure-openssl.c:1038
1537 #, c-format
1538 msgid "could not set maximum SSL protocol version: %s"
1539 msgstr "無法設定最大 SSL 通訊協定版本: %s"
1540
1541 # libpq/be-secure.c:714
1542 #: fe-secure-openssl.c:1076
1543 #, c-format
1544 msgid "could not load system root certificate paths: %s"
1545 msgstr "無法載入系統根憑證路徑: %s"
1546
1547 # fe-secure.c:977
1548 #: fe-secure-openssl.c:1093
1549 #, c-format
1550 msgid "could not read root certificate file \"%s\": %s"
1551 msgstr "無法讀取根憑證檔案 \"%s\": %s"
1552
1553 #: fe-secure-openssl.c:1145
1554 #, c-format
1555 msgid ""
1556 "could not get home directory to locate root certificate file\n"
1557 "Either provide the file, use the system's trusted roots with sslrootcert=system, or change sslmode to disable server certificate verification."
1558 msgstr ""
1559 "無法取得家目錄以找到根憑證檔\n"
1560 "可以選擇提供檔案、用 sslrootcert=system 使用系統的信任根憑證,或將 sslmode 改為停用伺服器憑證驗證。"
1561
1562 #: fe-secure-openssl.c:1148
1563 #, c-format
1564 msgid ""
1565 "root certificate file \"%s\" does not exist\n"
1566 "Either provide the file, use the system's trusted roots with sslrootcert=system, or change sslmode to disable server certificate verification."
1567 msgstr ""
1568 "根憑證檔 \"%s\" 不存在\n"
1569 "可以選擇提供檔案、用 sslrootcert=system 使用系統的信任根憑證,或將 sslmode 改為停用伺服器憑證驗證。"
1570
1571 # fe-secure.c:775
1572 #: fe-secure-openssl.c:1183
1573 #, c-format
1574 msgid "could not open certificate file \"%s\": %s"
1575 msgstr "無法開啟憑證檔 \"%s\": %s"
1576
1577 # fe-secure.c:784
1578 #: fe-secure-openssl.c:1201
1579 #, c-format
1580 msgid "could not read certificate file \"%s\": %s"
1581 msgstr "無法讀取憑證檔 \"%s\": %s"
1582
1583 # fe-secure.c:264
1584 #: fe-secure-openssl.c:1225
1585 #, c-format
1586 msgid "could not establish SSL connection: %s"
1587 msgstr "無法建立 SSL 連線: %s"
1588
1589 # libpq/be-secure.c:807
1590 #: fe-secure-openssl.c:1257
1591 #, c-format
1592 msgid "could not set SSL Server Name Indication (SNI): %s"
1593 msgstr "無法設定 SSL Server Name Indication (SNI): %s"
1594
1595 # fe-lobj.c:410
1596 # fe-lobj.c:495
1597 #: fe-secure-openssl.c:1300
1598 #, c-format
1599 msgid "could not load SSL engine \"%s\": %s"
1600 msgstr "無法載入 SSL 引擎 \"%s\": %s"
1601
1602 # libpq/be-secure.c:789
1603 #: fe-secure-openssl.c:1311
1604 #, c-format
1605 msgid "could not initialize SSL engine \"%s\": %s"
1606 msgstr "無法初始化 SSL 引擎 \"%s\": %s"
1607
1608 # fe-secure.c:833
1609 #: fe-secure-openssl.c:1326
1610 #, c-format
1611 msgid "could not read private SSL key \"%s\" from engine \"%s\": %s"
1612 msgstr "無法從引擎 \"%2$s\" 讀取私有 SSL 金鑰 \"%1$s\": %3$s"
1613
1614 # fe-secure.c:833
1615 #: fe-secure-openssl.c:1339
1616 #, c-format
1617 msgid "could not load private SSL key \"%s\" from engine \"%s\": %s"
1618 msgstr "無法從引擎 \"%2$s\" 載入私有 SSL 金鑰 \"%1$s\": %3$s"
1619
1620 # fe-secure.c:798
1621 #: fe-secure-openssl.c:1376
1622 #, c-format
1623 msgid "certificate present, but not private key file \"%s\""
1624 msgstr "憑證存在,但沒有私鑰檔 \"%s\""
1625
1626 # libpq/be-secure.c:666
1627 #: fe-secure-openssl.c:1379
1628 #, c-format
1629 msgid "could not stat private key file \"%s\": %m"
1630 msgstr "無法取得私鑰檔 \"%s\" 的狀態: %m"
1631
1632 #: fe-secure-openssl.c:1387
1633 #, c-format
1634 msgid "private key file \"%s\" is not a regular file"
1635 msgstr "私鑰檔 \"%s\" 不是一般檔案"
1636
1637 # fe-connect.c:3154
1638 #: fe-secure-openssl.c:1420
1639 #, c-format
1640 msgid "private key file \"%s\" has group or world access; file must have permissions u=rw (0600) or less if owned by the current user, or permissions u=rw,g=r (0640) or less if owned by root"
1641 msgstr "私鑰檔 \"%s\" 有群組或全域存取權限,如果檔案由目前使用者擁有,權限應為 u=rw (0600) 或更低的權限,如果由 root 擁有,權限應為 u=rw,g=r (0640) 或更低的權限"
1642
1643 # libpq/be-secure.c:689
1644 #: fe-secure-openssl.c:1444
1645 #, c-format
1646 msgid "could not load private key file \"%s\": %s"
1647 msgstr "無法載入私鑰檔\"%s\": %s"
1648
1649 # fe-secure.c:848
1650 #: fe-secure-openssl.c:1460
1651 #, c-format
1652 msgid "certificate does not match private key file \"%s\": %s"
1653 msgstr "憑證與私鑰檔 \"%s\" 不一致: %s"
1654
1655 # libpq/be-secure.c:694
1656 #: fe-secure-openssl.c:1528
1657 #, c-format
1658 msgid "SSL error: certificate verify failed: %s"
1659 msgstr "SSL 錯誤: 憑證驗證失敗: %s"
1660
1661 #: fe-secure-openssl.c:1573
1662 #, c-format
1663 msgid "This may indicate that the server does not support any SSL protocol version between %s and %s."
1664 msgstr "這可能表示伺服器不支援介於 %s 和 %s 之間的任何 SSL 協定版本。"
1665
1666 # fe-secure.c:1093
1667 #: fe-secure-openssl.c:1606
1668 #, c-format
1669 msgid "certificate could not be obtained: %s"
1670 msgstr "無法取得憑證: %s"
1671
1672 # libpq/be-secure.c:303 libpq/be-secure.c:396
1673 #: fe-secure-openssl.c:1711
1674 #, c-format
1675 msgid "no SSL error reported"
1676 msgstr "未回報 SSL 錯誤"
1677
1678 # libpq/be-secure.c:294 libpq/be-secure.c:387
1679 #: fe-secure-openssl.c:1720
1680 #, c-format
1681 msgid "SSL error code %lu"
1682 msgstr "SSL 錯誤碼 %lu"
1683
1684 #: fe-secure-openssl.c:1986
1685 #, c-format
1686 msgid "WARNING: sslpassword truncated\n"
1687 msgstr "警告: sslpassword 被截斷\n"
1688
1689 # fe-misc.c:610
1690 # fe-misc.c:701
1691 #: fe-secure.c:263
1692 #, c-format
1693 msgid "could not receive data from server: %s"
1694 msgstr "無法從伺服器接收資料: %s"
1695
1696 # fe-misc.c:803
1697 #: fe-secure.c:434
1698 #, c-format
1699 msgid "could not send data to server: %s"
1700 msgstr "無法傳送資料至伺服器: %s"
1701
1702 # libpq/be-secure.c:303 libpq/be-secure.c:396
1703 #: win32.c:310
1704 #, c-format
1705 msgid "unrecognized socket error: 0x%08X/%d"
1706 msgstr "無法識別的 socket 錯誤: 0x%08X/%d"
1707
1708 # fe-exec.c:1339
1709 #~ msgid "COPY IN state must be terminated first\n"
1710 #~ msgstr "必須先結束 COPY IN 狀態\n"
1711
1712 # fe-exec.c:1359
1713 #~ msgid "COPY OUT state must be terminated first\n"
1714 #~ msgstr "必須先結束 COPY OUT 狀態\n"
1715
1716 # fe-auth.c:411
1717 # fe-auth.c:415
1718 #, c-format
1719 #~ msgid "Kerberos 5 authentication rejected: %*s\n"
1720 #~ msgstr "kerberos 5 認證被拒絕: %*s\n"
1721
1722 #, c-format
1723 #~ msgid "PGEventProc \"%s\" failed during PGEVT_CONNRESET event\n"
1724 #~ msgstr "PGEVT_CONNRESET 事件期間 PGEventProc \"%s\" 失敗\n"
1725
1726 #, c-format
1727 #~ msgid "PGEventProc \"%s\" failed during PGEVT_RESULTCREATE event\n"
1728 #~ msgstr "PGEVT_RESULTCREATE 事件期間 PGEventProc \"%s\" 失敗\n"
1729
1730 # fe-auth.c:508
1731 #~ msgid "SCM_CRED authentication method not supported\n"
1732 #~ msgstr "不支援 SCM_CRED 驗證\n"
1733
1734 # fe-secure.c:335
1735 # fe-secure.c:420
1736 # fe-secure.c:1042
1737 #~ msgid "SSL SYSCALL error: EOF detected\n"
1738 #~ msgstr "SSL SYSCALL 錯誤: 發現EOF\n"
1739
1740 #~ msgid "SSL certificate's common name contains embedded null\n"
1741 #~ msgstr "SSL 憑證的一般名稱包含內嵌的 Null\n"
1742
1743 # fe-secure.c:347
1744 # fe-secure.c:431
1745 # fe-secure.c:1051
1746 #, c-format
1747 #~ msgid "SSL error: %s\n"
1748 #~ msgstr "SSL 錯誤: %s\n"
1749
1750 # fe-secure.c:775
1751 #, c-format
1752 #~ msgid "SSL library does not support CRL certificates (file \"%s\")\n"
1753 #~ msgstr "SSL 程式庫不支援 CRL 憑證 (檔案 \"%s\")\n"
1754
1755 #, c-format
1756 #~ msgid "WSAIoctl(SIO_KEEPALIVE_VALS) failed: %ui\n"
1757 #~ msgstr "WSAIoctl(SIO_KEEPALIVE_VALS) 失敗: %ui\n"
1758
1759 # fe-lobj.c:653
1760 #~ msgid "cannot determine OID of function lo_creat\n"
1761 #~ msgstr "無法判斷函式 lo_creat 的 OID\n"
1762
1763 # fe-lobj.c:653
1764 #~ msgid "cannot determine OID of function lo_create\n"
1765 #~ msgstr "無法判斷函式 lo_create 的 OID\n"
1766
1767 # fe-lobj.c:667
1768 #~ msgid "cannot determine OID of function lo_lseek\n"
1769 #~ msgstr "無法判斷函式 lo_lseek 的 OID\n"
1770
1771 # fe-lobj.c:639
1772 #~ msgid "cannot determine OID of function lo_open\n"
1773 #~ msgstr "無法判斷函式 lo_open 的 OID\n"
1774
1775 # fe-lobj.c:653
1776 #~ msgid "cannot determine OID of function lo_truncate\n"
1777 #~ msgstr "無法判斷函式 lo_truncate 的 OID\n"
1778
1779 # fe-lobj.c:660
1780 #~ msgid "cannot determine OID of function lo_unlink\n"
1781 #~ msgstr "無法判斷函式 lo_unlink 的 OID\n"
1782
1783 # fe-lobj.c:681
1784 #~ msgid "cannot determine OID of function loread\n"
1785 #~ msgstr "無法判斷函式 loread 的 OID\n"
1786
1787 # fe-lobj.c:688
1788 #~ msgid "cannot determine OID of function lowrite\n"
1789 #~ msgstr "無法判斷函式 lowrite 的 OID\n"
1790
1791 # fe-secure.c:932
1792 #, c-format
1793 #~ msgid "could not create SSL context: %s\n"
1794 #~ msgstr "無法建立 SSL context: %s\n"
1795
1796 # libpq/pqcomm.c:702
1797 #, c-format
1798 #~ msgid "could not get effective UID from peer credentials: %s\n"
1799 #~ msgstr "無法從對點認證取得有效 UID: %s\n"
1800
1801 # libpq/be-secure.c:714
1802 #~ msgid "could not get home directory to locate client certificate files"
1803 #~ msgstr "無法取得用來找出用戶端憑證檔的主目錄"
1804
1805 # libpq/be-secure.c:714
1806 #~ msgid "could not get home directory to locate service definition file"
1807 #~ msgstr "無法取得用來尋找服務定義檔的家目錄"
1808
1809 # libpq/be-secure.c:689
1810 #, c-format
1811 #~ msgid "could not load private key file \"%s\": %s\n"
1812 #~ msgstr "無法載入私鑰檔 \"%s\": %s\n"
1813
1814 # fe-lobj.c:410
1815 # fe-lobj.c:495
1816 #, c-format
1817 #~ msgid "could not open file \"%s\": %s\n"
1818 #~ msgstr "無法開啟檔案 \"%s\": %s\n"
1819
1820 # fe-secure.c:815
1821 #~ msgid "could not open private key file \"%s\": %s\n"
1822 #~ msgstr "無法開啟私鑰檔\"%s\":%s\n"
1823
1824 # fe-secure.c:833
1825 #~ msgid "could not read private key file \"%s\": %s\n"
1826 #~ msgstr "無法讀取私鑰檔\"%s\":%s\n"
1827
1828 # fe-auth.c:441
1829 #, c-format
1830 #~ msgid "could not restore non-blocking mode on socket: %s\n"
1831 #~ msgstr "無法將 socket 還原為非阻擋模式: %s\n"
1832
1833 # fe-auth.c:394
1834 #, c-format
1835 #~ msgid "could not set socket to blocking mode: %s\n"
1836 #~ msgstr "無法將 socket 設為阻擋模式: %s\n"
1837
1838 # fe-connect.c:946
1839 #, c-format
1840 #~ msgid "could not translate host name \"%s\" to address: %s\n"
1841 #~ msgstr "無法將主機名稱 \"%s\" 轉換成位址: %s\n"
1842
1843 # fe-secure.c:504
1844 #~ msgid "error querying socket: %s\n"
1845 #~ msgstr "詢問socket發生錯誤:%s\n"
1846
1847 # fe-lobj.c:447
1848 #~ msgid "error while reading file \"%s\"\n"
1849 #~ msgstr "讀取檔案 \"%s\" 時發生錯誤\n"
1850
1851 # fe-auth.c:764
1852 #~ msgid "fe_getauthname: invalid authentication system: %d\n"
1853 #~ msgstr "fe_getauthname:無效的認證系統:%d\n"
1854
1855 # fe-exec.c:753
1856 # fe-exec.c:902
1857 # fe-exec.c:1577
1858 #~ msgid "function requires at least protocol version 3.0\n"
1859 #~ msgstr "函式需要 3.0 版以上的協定\n"
1860
1861 # fe-auth.c:692
1862 #~ msgid "invalid authentication service name \"%s\", ignored\n"
1863 #~ msgstr "忽略非法的認證服務名稱\"%s\"\n"
1864
1865 # fe-protocol2.c:91
1866 #, c-format
1867 #~ msgid "invalid setenv state %c, probably indicative of memory corruption\n"
1868 #~ msgstr "無效的 setenv 狀態 %c,可能是記憶體中的資料被破壞\n"
1869
1870 # fe-connect.c:452
1871 #, c-format
1872 #~ msgid "invalid sslmode value: \"%s\"\n"
1873 #~ msgstr "無效的 sslmode: \"%s\"\n"
1874
1875 # fe-protocol2.c:333
1876 #, c-format
1877 #~ msgid "invalid state %c, probably indicative of memory corruption\n"
1878 #~ msgstr "無效的狀態 %c,可能是記憶體中的資料被破壞\n"
1879
1880 # libpq/hba.c:1481 libpq/hba.c:1512 libpq/hba.c:1582
1881 #, c-format
1882 #~ msgid "local user with ID %d does not exist\n"
1883 #~ msgstr "本機使用者 ID %d 不存在\n"
1884
1885 # fe-protocol2.c:1208
1886 #~ msgid "lost synchronization with server, resetting connection"
1887 #~ msgstr "無法與伺服器協調,重置連線"
1888
1889 # fe-secure.c:824
1890 #~ msgid "private key file \"%s\" changed during execution\n"
1891 #~ msgstr "私鑰檔\"%s\"在執行過程中被改變\n"
1892
1893 # fe-misc.c:991
1894 #, c-format
1895 #~ msgid "select() failed: %s\n"
1896 #~ msgstr "select()失敗: %s\n"
1897
1898 # fe-protocol2.c:533
1899 #~ msgid "server sent binary data (\"B\" message) without prior row description (\"T\" message)"
1900 #~ msgstr "伺服器傳送二元資料(\"B\" 訊息)而未提供資料行描述(\"T\" 訊息)"
1901
1902 # fe-protocol3.c:306
1903 #~ msgid "server sent data (\"D\" message) without prior row description (\"T\" message)\n"
1904 #~ msgstr "伺服器傳送資料(\"D\" 訊息)而未提供資料行描述(\"T\" 訊息)\n"
1905
1906 # libpq/pqcomm.c:346
1907 #, c-format
1908 #~ msgid "setsockopt(SO_KEEPALIVE) failed: %s\n"
1909 #~ msgstr "setsockopt(SO_KEEPALIVE) 失敗: %s\n"
1910
1911 # libpq/pqcomm.c:346
1912 #, c-format
1913 #~ msgid "setsockopt(TCP_KEEPALIVE) failed: %s\n"
1914 #~ msgstr "setsockopt(TCP_KEEPALIVE) 失敗: %s\n"
1915
1916 # libpq/pqcomm.c:360
1917 #, c-format
1918 #~ msgid "setsockopt(TCP_KEEPCNT) failed: %s\n"
1919 #~ msgstr "setsockopt(TCP_KEEPCNT) 失敗: %s\n"
1920
1921 # libpq/pqcomm.c:346
1922 #, c-format
1923 #~ msgid "setsockopt(TCP_KEEPIDLE) failed: %s\n"
1924 #~ msgstr "setsockopt(TCP_KEEPIDLE) 失敗: %s\n"
1925
1926 # libpq/pqcomm.c:360
1927 #, c-format
1928 #~ msgid "setsockopt(TCP_KEEPINTVL) failed: %s\n"
1929 #~ msgstr "setsockopt(TCP_KEEPINTVL) 失敗: %s\n"
1930
1931 # fe-misc.c:968
1932 #~ msgid "socket not open\n"
1933 #~ msgstr "socket 未開啟\n"
1934
1935 # fe-protocol2.c:462
1936 #, c-format
1937 #~ msgid "unexpected character %c following empty query response (\"I\" message)"
1938 #~ msgstr "空的查詢回應(\"I\" 訊息)後跟隨非預期字元 %c"
1939
1940 # fe-secure.c:357
1941 # fe-secure.c:441
1942 # fe-secure.c:1059
1943 #, c-format
1944 #~ msgid "unrecognized SSL error code: %d\n"
1945 #~ msgstr "無法識別的 SSL 錯誤碼: %d\n"
1946
1947 # fe-secure.c:551
1948 #~ msgid "unsupported protocol\n"
1949 #~ msgstr "不被支援的協定\n"
1950
1951 #~ msgid "verified SSL connections are only supported when connecting to a host name"
1952 #~ msgstr "只有在連線到主機名稱時,才支援經驗證的 SSL 連線"