| 1 |
What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_invert |
| 2 |
Date: October 2016 |
| 3 |
KernelVersion: 4.9 |
| 4 |
Contact: Peter Rosin <[email protected]> |
| 5 |
Description: |
| 6 |
The DAC is used to find the peak level of an alternating |
| 7 |
voltage input signal by a binary search using the output |
| 8 |
of a comparator wired to an interrupt pin. Like so:: |
| 9 |
|
| 10 |
_ |
| 11 |
| \ |
| 12 |
input +------>-------|+ \ |
| 13 |
| \ |
| 14 |
.-------. | }---. |
| 15 |
| | | / | |
| 16 |
| dac|-->--|- / | |
| 17 |
| | |_/ | |
| 18 |
| | | |
| 19 |
| | | |
| 20 |
| irq|------<-------' |
| 21 |
| | |
| 22 |
'-------' |
| 23 |
|
| 24 |
The boolean invert attribute (0/1) should be set when the |
| 25 |
input signal is centered around the maximum value of the |
| 26 |
dac instead of zero. The envelope detector will search |
| 27 |
from below in this case and will also invert the result. |
| 28 |
|
| 29 |
The edge/level of the interrupt is also switched to its |
| 30 |
opposite value. |
| 31 |
|
| 32 |
What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_compare_interval |
| 33 |
Date: October 2016 |
| 34 |
KernelVersion: 4.9 |
| 35 |
Contact: Peter Rosin <[email protected]> |
| 36 |
Description: |
| 37 |
Number of milliseconds to wait for the comparator in each |
| 38 |
step of the binary search for the input peak level. Needs |
| 39 |
to relate to the frequency of the input signal. |