| 1 |
What: /sys/bus/i2c/.../idle_state |
| 2 |
Date: January 2019 |
| 3 |
KernelVersion: 5.2 |
| 4 |
Contact: Robert Shearman <[email protected]> |
| 5 |
Description: |
| 6 |
Value that exists only for mux devices that can be |
| 7 |
written to control the behaviour of the multiplexer on |
| 8 |
idle. Possible values: |
| 9 |
|
| 10 |
=========== =============================================== |
| 11 |
-2 disconnect on idle, i.e. deselect the last used |
| 12 |
channel, which is useful when there is a device |
| 13 |
with an address that conflicts with another |
| 14 |
device on another mux on the same parent bus. |
| 15 |
-1 leave the mux as-is, which is the most optimal |
| 16 |
setting in terms of I2C operations and is the |
| 17 |
default mode. |
| 18 |
0..<nchans> set the mux to a predetermined channel, |
| 19 |
which is useful if there is one channel that is |
| 20 |
used almost always, and you want to reduce the |
| 21 |
latency for normal operations after rare |
| 22 |
transactions on other channels |
| 23 |
=========== =============================================== |