| 1 |
Freescale QUICC Engine USB Controller |
| 2 |
|
| 3 |
Required properties: |
| 4 |
- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb". |
| 5 |
- reg : the first two cells should contain usb registers location and |
| 6 |
length, the next two two cells should contain PRAM location and |
| 7 |
length. |
| 8 |
- interrupts : should contain USB interrupt. |
| 9 |
- fsl,fullspeed-clock : specifies the full speed USB clock source: |
| 10 |
"none": clock source is disabled |
| 11 |
"brg1" through "brg16": clock source is BRG1-BRG16, respectively |
| 12 |
"clk1" through "clk24": clock source is CLK1-CLK24, respectively |
| 13 |
- fsl,lowspeed-clock : specifies the low speed USB clock source: |
| 14 |
"none": clock source is disabled |
| 15 |
"brg1" through "brg16": clock source is BRG1-BRG16, respectively |
| 16 |
"clk1" through "clk24": clock source is CLK1-CLK24, respectively |
| 17 |
- hub-power-budget : USB power budget for the root hub, in mA. |
| 18 |
- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP, |
| 19 |
USBRN, SPEED (optional), and POWER (optional). |
| 20 |
|
| 21 |
Example: |
| 22 |
|
| 23 |
usb@6c0 { |
| 24 |
compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb"; |
| 25 |
reg = <0x6c0 0x40 0x8b00 0x100>; |
| 26 |
interrupts = <11>; |
| 27 |
interrupt-parent = <&qeic>; |
| 28 |
fsl,fullspeed-clock = "clk21"; |
| 29 |
gpios = <&qe_pio_b 2 0 /* USBOE */ |
| 30 |
&qe_pio_b 3 0 /* USBTP */ |
| 31 |
&qe_pio_b 8 0 /* USBTN */ |
| 32 |
&qe_pio_b 9 0 /* USBRP */ |
| 33 |
&qe_pio_b 11 0 /* USBRN */ |
| 34 |
&qe_pio_e 20 0 /* SPEED */ |
| 35 |
&qe_pio_e 21 0 /* POWER */>; |
| 36 |
}; |