| 1 |
* Parallel I/O Ports |
| 2 |
|
| 3 |
This node configures Parallel I/O ports for CPUs with QE support. |
| 4 |
The node should reside in the "soc" node of the tree. For each |
| 5 |
device that using parallel I/O ports, a child node should be created. |
| 6 |
See the definition of the Pin configuration nodes below for more |
| 7 |
information. |
| 8 |
|
| 9 |
Required properties: |
| 10 |
- device_type : should be "par_io". |
| 11 |
- reg : offset to the register set and its length. |
| 12 |
- num-ports : number of Parallel I/O ports |
| 13 |
|
| 14 |
Example: |
| 15 |
par_io@1400 { |
| 16 |
reg = <1400 100>; |
| 17 |
#address-cells = <1>; |
| 18 |
#size-cells = <0>; |
| 19 |
device_type = "par_io"; |
| 20 |
num-ports = <7>; |
| 21 |
ucc_pin@1 { |
| 22 |
...... |
| 23 |
}; |
| 24 |
|
| 25 |
Note that "par_io" nodes are obsolete, and should not be used for |
| 26 |
the new device trees. Instead, each Par I/O bank should be represented |
| 27 |
via its own gpio-controller node: |
| 28 |
|
| 29 |
Required properties: |
| 30 |
- #gpio-cells : should be "2". |
| 31 |
- compatible : should be "fsl,<chip>-qe-pario-bank", |
| 32 |
"fsl,mpc8323-qe-pario-bank". |
| 33 |
- reg : offset to the register set and its length. |
| 34 |
- gpio-controller : node to identify gpio controllers. |
| 35 |
|
| 36 |
Example: |
| 37 |
qe_pio_a: gpio-controller@1400 { |
| 38 |
#gpio-cells = <2>; |
| 39 |
compatible = "fsl,mpc8360-qe-pario-bank", |
| 40 |
"fsl,mpc8323-qe-pario-bank"; |
| 41 |
reg = <0x1400 0x18>; |
| 42 |
gpio-controller; |
| 43 |
}; |
| 44 |
|
| 45 |
qe_pio_e: gpio-controller@1460 { |
| 46 |
#gpio-cells = <2>; |
| 47 |
compatible = "fsl,mpc8360-qe-pario-bank", |
| 48 |
"fsl,mpc8323-qe-pario-bank"; |
| 49 |
reg = <0x1460 0x18>; |
| 50 |
gpio-controller; |
| 51 |
}; |