| 1 |
* Uploaded QE firmware |
| 2 |
|
| 3 |
If a new firmware has been uploaded to the QE (usually by the |
| 4 |
boot loader), then a 'firmware' child node should be added to the QE |
| 5 |
node. This node provides information on the uploaded firmware that |
| 6 |
device drivers may need. |
| 7 |
|
| 8 |
Required properties: |
| 9 |
- id: The string name of the firmware. This is taken from the 'id' |
| 10 |
member of the qe_firmware structure of the uploaded firmware. |
| 11 |
Device drivers can search this string to determine if the |
| 12 |
firmware they want is already present. |
| 13 |
- extended-modes: The Extended Modes bitfield, taken from the |
| 14 |
firmware binary. It is a 64-bit number represented |
| 15 |
as an array of two 32-bit numbers. |
| 16 |
- virtual-traps: The virtual traps, taken from the firmware binary. |
| 17 |
It is an array of 8 32-bit numbers. |
| 18 |
|
| 19 |
Example: |
| 20 |
firmware { |
| 21 |
id = "Soft-UART"; |
| 22 |
extended-modes = <0 0>; |
| 23 |
virtual-traps = <0 0 0 0 0 0 0 0>; |
| 24 |
}; |