Debian Codegraph @

Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688

raw
1 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
2 KernelVersion: 5.18
3 Contact: [email protected]
4 Description:
5 Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
6 for changing the dither parameters. They way it should be done is:
7
8 - disable dither operation;
9 - change dither parameters (eg: frequency, phase...);
10 - enabled dither operation
11
12 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
13 KernelVersion: 5.18
14 Contact: [email protected]
15 Description:
16 This raw, unscaled value refers to the dither signal amplitude.
17 The same scale as in out_voltageY_raw applies. However, the
18 offset might be different as it's always 0 for this attribute.
19
20 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
21 KernelVersion: 5.18
22 Contact: [email protected]
23 Description:
24 Available range for dither raw amplitude values.
25
26 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
27 KernelVersion: 5.18
28 Contact: [email protected]
29 Description:
30 Offset applied to out_voltageY_dither_raw. Read only attribute
31 always set to 0.
32
33 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
34 KernelVersion: 5.18
35 Contact: [email protected]
36 Description:
37 Sets the dither signal frequency. Units are in Hz.
38
39 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
40 KernelVersion: 5.18
41 Contact: [email protected]
42 Description:
43 Returns the available values for the dither frequency.
44
45 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
46 KernelVersion: 5.18
47 Contact: [email protected]
48 Description:
49 Sets the dither signal phase. Units are in Radians.
50
51 What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
52 KernelVersion: 5.18
53 Contact: [email protected]
54 Description:
55 Returns the available values for the dither phase.