| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* This file is part of wl1271 |
| 4 |
* |
| 5 |
* Copyright (C) 2008-2009 Nokia Corporation |
| 6 |
* |
| 7 |
* Contact: Luciano Coelho <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/interrupt.h> |
| 11 |
#include <linux/irq.h> |
| 12 |
#include <linux/module.h> |
| 13 |
#include <linux/slab.h> |
| 14 |
#include <linux/swab.h> |
| 15 |
#include <linux/crc7.h> |
| 16 |
#include <linux/spi/spi.h> |
| 17 |
#include <linux/platform_device.h> |
| 18 |
#include <linux/of_irq.h> |
| 19 |
#include <linux/regulator/consumer.h> |
| 20 |
|
| 21 |
#include "wlcore.h" |
| 22 |
#include "wl12xx_80211.h" |
| 23 |
#include "io.h" |
| 24 |
|
| 25 |
#define WSPI_CMD_READ 0x40000000 |
| 26 |
#define WSPI_CMD_WRITE 0x00000000 |
| 27 |
#define WSPI_CMD_FIXED 0x20000000 |
| 28 |
#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000 |
| 29 |
#define WSPI_CMD_BYTE_LENGTH_OFFSET 17 |
| 30 |
#define WSPI_CMD_BYTE_ADDR 0x0001FFFF |
| 31 |
|
| 32 |
#define WSPI_INIT_CMD_CRC_LEN 5 |
| 33 |
|
| 34 |
#define WSPI_INIT_CMD_START 0x00 |
| 35 |
#define WSPI_INIT_CMD_TX 0x40 |
| 36 |
/* the extra bypass bit is sampled by the TNET as '1' */ |
| 37 |
#define WSPI_INIT_CMD_BYPASS_BIT 0x80 |
| 38 |
#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07 |
| 39 |
#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80 |
| 40 |
#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00 |
| 41 |
#define WSPI_INIT_CMD_IOD 0x40 |
| 42 |
#define WSPI_INIT_CMD_IP 0x20 |
| 43 |
#define WSPI_INIT_CMD_CS 0x10 |
| 44 |
#define WSPI_INIT_CMD_WS 0x08 |
| 45 |
#define WSPI_INIT_CMD_WSPI 0x01 |
| 46 |
#define WSPI_INIT_CMD_END 0x01 |
| 47 |
|
| 48 |
#define WSPI_INIT_CMD_LEN 8 |
| 49 |
|
| 50 |
#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \ |
| 51 |
((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32)) |
| 52 |
#define HW_ACCESS_WSPI_INIT_CMD_MASK 0 |
| 53 |
|
| 54 |
/* HW limitation: maximum possible chunk size is 4095 bytes */ |
| 55 |
#define WSPI_MAX_CHUNK_SIZE 4092 |
| 56 |
|
| 57 |
/* |
| 58 |
* wl18xx driver aggregation buffer size is (13 * 4K) compared to |
| 59 |
* (4 * 4K) for wl12xx, so use the larger buffer needed for wl18xx |
| 60 |
*/ |
| 61 |
#define SPI_AGGR_BUFFER_SIZE (13 * SZ_4K) |
| 62 |
|
| 63 |
/* Maximum number of SPI write chunks */ |
| 64 |
#define WSPI_MAX_NUM_OF_CHUNKS \ |
| 65 |
((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1) |
| 66 |
|
| 67 |
static const struct wilink_family_data wl127x_data = { |
| 68 |
.name = "wl127x", |
| 69 |
.nvs_name = "ti-connectivity/wl127x-nvs.bin", |
| 70 |
}; |
| 71 |
|
| 72 |
static const struct wilink_family_data wl128x_data = { |
| 73 |
.name = "wl128x", |
| 74 |
.nvs_name = "ti-connectivity/wl128x-nvs.bin", |
| 75 |
}; |
| 76 |
|
| 77 |
static const struct wilink_family_data wl18xx_data = { |
| 78 |
.name = "wl18xx", |
| 79 |
.cfg_name = "ti-connectivity/wl18xx-conf.bin", |
| 80 |
.nvs_name = "ti-connectivity/wl1271-nvs.bin", |
| 81 |
}; |
| 82 |
|
| 83 |
struct wl12xx_spi_glue { |
| 84 |
struct device *dev; |
| 85 |
struct platform_device *core; |
| 86 |
struct regulator *reg; /* Power regulator */ |
| 87 |
}; |
| 88 |
|
| 89 |
static void wl12xx_spi_reset(struct device *child) |
| 90 |
{ |
| 91 |
struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); |
| 92 |
u8 *cmd; |
| 93 |
struct spi_transfer t; |
| 94 |
struct spi_message m; |
| 95 |
|
| 96 |
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); |
| 97 |
if (!cmd) { |
| 98 |
dev_err(child->parent, |
| 99 |
"could not allocate cmd for spi reset\n"); |
| 100 |
return; |
| 101 |
} |
| 102 |
|
| 103 |
memset(&t, 0, sizeof(t)); |
| 104 |
spi_message_init(&m); |
| 105 |
|
| 106 |
memset(cmd, 0xff, WSPI_INIT_CMD_LEN); |
| 107 |
|
| 108 |
t.tx_buf = cmd; |
| 109 |
t.len = WSPI_INIT_CMD_LEN; |
| 110 |
spi_message_add_tail(&t, &m); |
| 111 |
|
| 112 |
spi_sync(to_spi_device(glue->dev), &m); |
| 113 |
|
| 114 |
kfree(cmd); |
| 115 |
} |
| 116 |
|
| 117 |
static void wl12xx_spi_init(struct device *child) |
| 118 |
{ |
| 119 |
struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); |
| 120 |
struct spi_transfer t; |
| 121 |
struct spi_message m; |
| 122 |
struct spi_device *spi = to_spi_device(glue->dev); |
| 123 |
u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); |
| 124 |
|
| 125 |
if (!cmd) { |
| 126 |
dev_err(child->parent, |
| 127 |
"could not allocate cmd for spi init\n"); |
| 128 |
return; |
| 129 |
} |
| 130 |
|
| 131 |
memset(&t, 0, sizeof(t)); |
| 132 |
spi_message_init(&m); |
| 133 |
|
| 134 |
/* |
| 135 |
* Set WSPI_INIT_COMMAND |
| 136 |
* the data is being send from the MSB to LSB |
| 137 |
*/ |
| 138 |
cmd[0] = 0xff; |
| 139 |
cmd[1] = 0xff; |
| 140 |
cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; |
| 141 |
cmd[3] = 0; |
| 142 |
cmd[4] = 0; |
| 143 |
cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3; |
| 144 |
cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; |
| 145 |
|
| 146 |
cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS |
| 147 |
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; |
| 148 |
|
| 149 |
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) |
| 150 |
cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; |
| 151 |
else |
| 152 |
cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; |
| 153 |
|
| 154 |
cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; |
| 155 |
|
| 156 |
/* |
| 157 |
* The above is the logical order; it must actually be stored |
| 158 |
* in the buffer byte-swapped. |
| 159 |
*/ |
| 160 |
__swab32s((u32 *)cmd); |
| 161 |
__swab32s((u32 *)cmd+1); |
| 162 |
|
| 163 |
t.tx_buf = cmd; |
| 164 |
t.len = WSPI_INIT_CMD_LEN; |
| 165 |
spi_message_add_tail(&t, &m); |
| 166 |
|
| 167 |
spi_sync(to_spi_device(glue->dev), &m); |
| 168 |
|
| 169 |
/* Send extra clocks with inverted CS (high). this is required |
| 170 |
* by the wilink family in order to successfully enter WSPI mode. |
| 171 |
*/ |
| 172 |
spi->mode ^= SPI_CS_HIGH; |
| 173 |
memset(&m, 0, sizeof(m)); |
| 174 |
spi_message_init(&m); |
| 175 |
|
| 176 |
cmd[0] = 0xff; |
| 177 |
cmd[1] = 0xff; |
| 178 |
cmd[2] = 0xff; |
| 179 |
cmd[3] = 0xff; |
| 180 |
__swab32s((u32 *)cmd); |
| 181 |
|
| 182 |
t.tx_buf = cmd; |
| 183 |
t.len = 4; |
| 184 |
spi_message_add_tail(&t, &m); |
| 185 |
|
| 186 |
spi_sync(to_spi_device(glue->dev), &m); |
| 187 |
|
| 188 |
/* Restore chip select configuration to normal */ |
| 189 |
spi->mode ^= SPI_CS_HIGH; |
| 190 |
kfree(cmd); |
| 191 |
} |
| 192 |
|
| 193 |
#define WL1271_BUSY_WORD_TIMEOUT 1000 |
| 194 |
|
| 195 |
static int wl12xx_spi_read_busy(struct device *child) |
| 196 |
{ |
| 197 |
struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); |
| 198 |
struct wl1271 *wl = dev_get_drvdata(child); |
| 199 |
struct spi_transfer t[1]; |
| 200 |
struct spi_message m; |
| 201 |
u32 *busy_buf; |
| 202 |
int num_busy_bytes = 0; |
| 203 |
|
| 204 |
/* |
| 205 |
* Read further busy words from SPI until a non-busy word is |
| 206 |
* encountered, then read the data itself into the buffer. |
| 207 |
*/ |
| 208 |
|
| 209 |
num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT; |
| 210 |
busy_buf = wl->buffer_busyword; |
| 211 |
while (num_busy_bytes) { |
| 212 |
num_busy_bytes--; |
| 213 |
spi_message_init(&m); |
| 214 |
memset(t, 0, sizeof(t)); |
| 215 |
t[0].rx_buf = busy_buf; |
| 216 |
t[0].len = sizeof(u32); |
| 217 |
t[0].cs_change = true; |
| 218 |
spi_message_add_tail(&t[0], &m); |
| 219 |
spi_sync(to_spi_device(glue->dev), &m); |
| 220 |
|
| 221 |
if (*busy_buf & 0x1) |
| 222 |
return 0; |
| 223 |
} |
| 224 |
|
| 225 |
/* The SPI bus is unresponsive, the read failed. */ |
| 226 |
dev_err(child->parent, "SPI read busy-word timeout!\n"); |
| 227 |
return -ETIMEDOUT; |
| 228 |
} |
| 229 |
|
| 230 |
static int __must_check wl12xx_spi_raw_read(struct device *child, int addr, |
| 231 |
void *buf, size_t len, bool fixed) |
| 232 |
{ |
| 233 |
struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); |
| 234 |
struct wl1271 *wl = dev_get_drvdata(child); |
| 235 |
struct spi_transfer t[2]; |
| 236 |
struct spi_message m; |
| 237 |
u32 *busy_buf; |
| 238 |
u32 *cmd; |
| 239 |
u32 chunk_len; |
| 240 |
|
| 241 |
while (len > 0) { |
| 242 |
chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len); |
| 243 |
|
| 244 |
cmd = &wl->buffer_cmd; |
| 245 |
busy_buf = wl->buffer_busyword; |
| 246 |
|
| 247 |
*cmd = 0; |
| 248 |
*cmd |= WSPI_CMD_READ; |
| 249 |
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & |
| 250 |
WSPI_CMD_BYTE_LENGTH; |
| 251 |
*cmd |= addr & WSPI_CMD_BYTE_ADDR; |
| 252 |
|
| 253 |
if (fixed) |
| 254 |
*cmd |= WSPI_CMD_FIXED; |
| 255 |
|
| 256 |
spi_message_init(&m); |
| 257 |
memset(t, 0, sizeof(t)); |
| 258 |
|
| 259 |
t[0].tx_buf = cmd; |
| 260 |
t[0].len = 4; |
| 261 |
t[0].cs_change = true; |
| 262 |
spi_message_add_tail(&t[0], &m); |
| 263 |
|
| 264 |
/* Busy and non busy words read */ |
| 265 |
t[1].rx_buf = busy_buf; |
| 266 |
t[1].len = WL1271_BUSY_WORD_LEN; |
| 267 |
t[1].cs_change = true; |
| 268 |
spi_message_add_tail(&t[1], &m); |
| 269 |
|
| 270 |
spi_sync(to_spi_device(glue->dev), &m); |
| 271 |
|
| 272 |
if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) && |
| 273 |
wl12xx_spi_read_busy(child)) { |
| 274 |
memset(buf, 0, chunk_len); |
| 275 |
return 0; |
| 276 |
} |
| 277 |
|
| 278 |
spi_message_init(&m); |
| 279 |
memset(t, 0, sizeof(t)); |
| 280 |
|
| 281 |
t[0].rx_buf = buf; |
| 282 |
t[0].len = chunk_len; |
| 283 |
t[0].cs_change = true; |
| 284 |
spi_message_add_tail(&t[0], &m); |
| 285 |
|
| 286 |
spi_sync(to_spi_device(glue->dev), &m); |
| 287 |
|
| 288 |
if (!fixed) |
| 289 |
addr += chunk_len; |
| 290 |
buf += chunk_len; |
| 291 |
len -= chunk_len; |
| 292 |
} |
| 293 |
|
| 294 |
return 0; |
| 295 |
} |
| 296 |
|
| 297 |
static int __wl12xx_spi_raw_write(struct device *child, int addr, |
| 298 |
void *buf, size_t len, bool fixed) |
| 299 |
{ |
| 300 |
struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); |
| 301 |
struct spi_transfer *t; |
| 302 |
struct spi_message m; |
| 303 |
u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */ |
| 304 |
u32 *cmd; |
| 305 |
u32 chunk_len; |
| 306 |
int i; |
| 307 |
|
| 308 |
/* SPI write buffers - 2 for each chunk */ |
| 309 |
t = kzalloc(sizeof(*t) * 2 * WSPI_MAX_NUM_OF_CHUNKS, GFP_KERNEL); |
| 310 |
if (!t) |
| 311 |
return -ENOMEM; |
| 312 |
|
| 313 |
WARN_ON(len > SPI_AGGR_BUFFER_SIZE); |
| 314 |
|
| 315 |
spi_message_init(&m); |
| 316 |
|
| 317 |
cmd = &commands[0]; |
| 318 |
i = 0; |
| 319 |
while (len > 0) { |
| 320 |
chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len); |
| 321 |
|
| 322 |
*cmd = 0; |
| 323 |
*cmd |= WSPI_CMD_WRITE; |
| 324 |
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & |
| 325 |
WSPI_CMD_BYTE_LENGTH; |
| 326 |
*cmd |= addr & WSPI_CMD_BYTE_ADDR; |
| 327 |
|
| 328 |
if (fixed) |
| 329 |
*cmd |= WSPI_CMD_FIXED; |
| 330 |
|
| 331 |
t[i].tx_buf = cmd; |
| 332 |
t[i].len = sizeof(*cmd); |
| 333 |
spi_message_add_tail(&t[i++], &m); |
| 334 |
|
| 335 |
t[i].tx_buf = buf; |
| 336 |
t[i].len = chunk_len; |
| 337 |
spi_message_add_tail(&t[i++], &m); |
| 338 |
|
| 339 |
if (!fixed) |
| 340 |
addr += chunk_len; |
| 341 |
buf += chunk_len; |
| 342 |
len -= chunk_len; |
| 343 |
cmd++; |
| 344 |
} |
| 345 |
|
| 346 |
spi_sync(to_spi_device(glue->dev), &m); |
| 347 |
|
| 348 |
kfree(t); |
| 349 |
return 0; |
| 350 |
} |
| 351 |
|
| 352 |
static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, |
| 353 |
void *buf, size_t len, bool fixed) |
| 354 |
{ |
| 355 |
/* The ELP wakeup write may fail the first time due to internal |
| 356 |
* hardware latency. It is safer to send the wakeup command twice to |
| 357 |
* avoid unexpected failures. |
| 358 |
*/ |
| 359 |
if (addr == HW_ACCESS_ELP_CTRL_REG) |
| 360 |
__wl12xx_spi_raw_write(child, addr, buf, len, fixed); |
| 361 |
|
| 362 |
return __wl12xx_spi_raw_write(child, addr, buf, len, fixed); |
| 363 |
} |
| 364 |
|
| 365 |
/** |
| 366 |
* wl12xx_spi_set_power - power on/off the wl12xx unit |
| 367 |
* @child: wl12xx device handle. |
| 368 |
* @enable: true/false to power on/off the unit. |
| 369 |
* |
| 370 |
* use the WiFi enable regulator to enable/disable the WiFi unit. |
| 371 |
*/ |
| 372 |
static int wl12xx_spi_set_power(struct device *child, bool enable) |
| 373 |
{ |
| 374 |
int ret = 0; |
| 375 |
struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); |
| 376 |
|
| 377 |
WARN_ON(!glue->reg); |
| 378 |
|
| 379 |
/* Update regulator state */ |
| 380 |
if (enable) { |
| 381 |
ret = regulator_enable(glue->reg); |
| 382 |
if (ret) |
| 383 |
dev_err(child, "Power enable failure\n"); |
| 384 |
} else { |
| 385 |
ret = regulator_disable(glue->reg); |
| 386 |
if (ret) |
| 387 |
dev_err(child, "Power disable failure\n"); |
| 388 |
} |
| 389 |
|
| 390 |
return ret; |
| 391 |
} |
| 392 |
|
| 393 |
/* |
| 394 |
* wl12xx_spi_set_block_size |
| 395 |
* |
| 396 |
* This function is not needed for spi mode, but need to be present. |
| 397 |
* Without it defined the wlcore fallback to use the wrong packet |
| 398 |
* allignment on tx. |
| 399 |
*/ |
| 400 |
static void wl12xx_spi_set_block_size(struct device *child, |
| 401 |
unsigned int blksz) |
| 402 |
{ |
| 403 |
} |
| 404 |
|
| 405 |
static struct wl1271_if_operations spi_ops = { |
| 406 |
.read = wl12xx_spi_raw_read, |
| 407 |
.write = wl12xx_spi_raw_write, |
| 408 |
.reset = wl12xx_spi_reset, |
| 409 |
.init = wl12xx_spi_init, |
| 410 |
.power = wl12xx_spi_set_power, |
| 411 |
.set_block_size = wl12xx_spi_set_block_size, |
| 412 |
}; |
| 413 |
|
| 414 |
static const struct of_device_id wlcore_spi_of_match_table[] = { |
| 415 |
{ .compatible = "ti,wl1271", .data = &wl127x_data}, |
| 416 |
{ .compatible = "ti,wl1273", .data = &wl127x_data}, |
| 417 |
{ .compatible = "ti,wl1281", .data = &wl128x_data}, |
| 418 |
{ .compatible = "ti,wl1283", .data = &wl128x_data}, |
| 419 |
{ .compatible = "ti,wl1285", .data = &wl128x_data}, |
| 420 |
{ .compatible = "ti,wl1801", .data = &wl18xx_data}, |
| 421 |
{ .compatible = "ti,wl1805", .data = &wl18xx_data}, |
| 422 |
{ .compatible = "ti,wl1807", .data = &wl18xx_data}, |
| 423 |
{ .compatible = "ti,wl1831", .data = &wl18xx_data}, |
| 424 |
{ .compatible = "ti,wl1835", .data = &wl18xx_data}, |
| 425 |
{ .compatible = "ti,wl1837", .data = &wl18xx_data}, |
| 426 |
{ } |
| 427 |
}; |
| 428 |
MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table); |
| 429 |
|
| 430 |
/** |
| 431 |
* wlcore_probe_of - DT node parsing. |
| 432 |
* @spi: SPI slave device parameters. |
| 433 |
* @glue: wl12xx SPI bus to slave device glue parameters. |
| 434 |
* @pdev_data: wlcore device parameters |
| 435 |
*/ |
| 436 |
static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, |
| 437 |
struct wlcore_platdev_data *pdev_data) |
| 438 |
{ |
| 439 |
struct device_node *dt_node = spi->dev.of_node; |
| 440 |
const struct of_device_id *of_id; |
| 441 |
|
| 442 |
of_id = of_match_node(wlcore_spi_of_match_table, dt_node); |
| 443 |
if (!of_id) |
| 444 |
return -ENODEV; |
| 445 |
|
| 446 |
pdev_data->family = of_id->data; |
| 447 |
dev_info(&spi->dev, "selected chip family is %s\n", |
| 448 |
pdev_data->family->name); |
| 449 |
|
| 450 |
pdev_data->ref_clock_xtal = of_property_read_bool(dt_node, "clock-xtal"); |
| 451 |
|
| 452 |
/* optional clock frequency params */ |
| 453 |
of_property_read_u32(dt_node, "ref-clock-frequency", |
| 454 |
&pdev_data->ref_clock_freq); |
| 455 |
of_property_read_u32(dt_node, "tcxo-clock-frequency", |
| 456 |
&pdev_data->tcxo_clock_freq); |
| 457 |
|
| 458 |
return 0; |
| 459 |
} |
| 460 |
|
| 461 |
static int wl1271_probe(struct spi_device *spi) |
| 462 |
{ |
| 463 |
struct wl12xx_spi_glue *glue; |
| 464 |
struct wlcore_platdev_data *pdev_data; |
| 465 |
struct resource res[1]; |
| 466 |
int ret; |
| 467 |
|
| 468 |
pdev_data = devm_kzalloc(&spi->dev, sizeof(*pdev_data), GFP_KERNEL); |
| 469 |
if (!pdev_data) |
| 470 |
return -ENOMEM; |
| 471 |
|
| 472 |
pdev_data->if_ops = &spi_ops; |
| 473 |
|
| 474 |
glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL); |
| 475 |
if (!glue) { |
| 476 |
dev_err(&spi->dev, "can't allocate glue\n"); |
| 477 |
return -ENOMEM; |
| 478 |
} |
| 479 |
|
| 480 |
glue->dev = &spi->dev; |
| 481 |
|
| 482 |
spi_set_drvdata(spi, glue); |
| 483 |
|
| 484 |
/* This is the only SPI value that we need to set here, the rest |
| 485 |
* comes from the board-peripherals file */ |
| 486 |
spi->bits_per_word = 32; |
| 487 |
|
| 488 |
glue->reg = devm_regulator_get(&spi->dev, "vwlan"); |
| 489 |
if (IS_ERR(glue->reg)) |
| 490 |
return dev_err_probe(glue->dev, PTR_ERR(glue->reg), |
| 491 |
"can't get regulator\n"); |
| 492 |
|
| 493 |
ret = wlcore_probe_of(spi, glue, pdev_data); |
| 494 |
if (ret) { |
| 495 |
dev_err(glue->dev, |
| 496 |
"can't get device tree parameters (%d)\n", ret); |
| 497 |
return ret; |
| 498 |
} |
| 499 |
|
| 500 |
ret = spi_setup(spi); |
| 501 |
if (ret < 0) { |
| 502 |
dev_err(glue->dev, "spi_setup failed\n"); |
| 503 |
return ret; |
| 504 |
} |
| 505 |
|
| 506 |
glue->core = platform_device_alloc(pdev_data->family->name, |
| 507 |
PLATFORM_DEVID_AUTO); |
| 508 |
if (!glue->core) { |
| 509 |
dev_err(glue->dev, "can't allocate platform_device\n"); |
| 510 |
return -ENOMEM; |
| 511 |
} |
| 512 |
|
| 513 |
glue->core->dev.parent = &spi->dev; |
| 514 |
|
| 515 |
memset(res, 0x00, sizeof(res)); |
| 516 |
|
| 517 |
res[0].start = spi->irq; |
| 518 |
res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq); |
| 519 |
res[0].name = "irq"; |
| 520 |
|
| 521 |
ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); |
| 522 |
if (ret) { |
| 523 |
dev_err(glue->dev, "can't add resources\n"); |
| 524 |
goto out_dev_put; |
| 525 |
} |
| 526 |
|
| 527 |
ret = platform_device_add_data(glue->core, pdev_data, |
| 528 |
sizeof(*pdev_data)); |
| 529 |
if (ret) { |
| 530 |
dev_err(glue->dev, "can't add platform data\n"); |
| 531 |
goto out_dev_put; |
| 532 |
} |
| 533 |
|
| 534 |
ret = platform_device_add(glue->core); |
| 535 |
if (ret) { |
| 536 |
dev_err(glue->dev, "can't register platform device\n"); |
| 537 |
goto out_dev_put; |
| 538 |
} |
| 539 |
|
| 540 |
return 0; |
| 541 |
|
| 542 |
out_dev_put: |
| 543 |
platform_device_put(glue->core); |
| 544 |
return ret; |
| 545 |
} |
| 546 |
|
| 547 |
static void wl1271_remove(struct spi_device *spi) |
| 548 |
{ |
| 549 |
struct wl12xx_spi_glue *glue = spi_get_drvdata(spi); |
| 550 |
|
| 551 |
platform_device_unregister(glue->core); |
| 552 |
} |
| 553 |
|
| 554 |
static struct spi_driver wl1271_spi_driver = { |
| 555 |
.driver = { |
| 556 |
.name = "wl1271_spi", |
| 557 |
.of_match_table = wlcore_spi_of_match_table, |
| 558 |
}, |
| 559 |
|
| 560 |
.probe = wl1271_probe, |
| 561 |
.remove = wl1271_remove, |
| 562 |
}; |
| 563 |
|
| 564 |
module_spi_driver(wl1271_spi_driver); |
| 565 |
MODULE_DESCRIPTION("TI WLAN SPI helpers"); |
| 566 |
MODULE_LICENSE("GPL"); |
| 567 |
MODULE_AUTHOR("Luciano Coelho <[email protected]>"); |
| 568 |
MODULE_AUTHOR("Juuso Oikarinen <[email protected]>"); |
| 569 |
MODULE_ALIAS("spi:wl1271"); |