| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* This file is part of wl1271 |
| 4 |
* |
| 5 |
* Copyright (C) 2009-2010 Nokia Corporation |
| 6 |
* |
| 7 |
* Contact: Luciano Coelho <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#include <linux/irq.h> |
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/vmalloc.h> |
| 13 |
#include <linux/platform_device.h> |
| 14 |
#include <linux/mmc/sdio.h> |
| 15 |
#include <linux/mmc/sdio_func.h> |
| 16 |
#include <linux/mmc/sdio_ids.h> |
| 17 |
#include <linux/mmc/card.h> |
| 18 |
#include <linux/mmc/host.h> |
| 19 |
#include <linux/pm_runtime.h> |
| 20 |
#include <linux/printk.h> |
| 21 |
#include <linux/of.h> |
| 22 |
#include <linux/of_irq.h> |
| 23 |
|
| 24 |
#include "wlcore.h" |
| 25 |
#include "wl12xx_80211.h" |
| 26 |
#include "io.h" |
| 27 |
|
| 28 |
static bool dump; |
| 29 |
|
| 30 |
struct wl12xx_sdio_glue { |
| 31 |
struct device *dev; |
| 32 |
struct platform_device *core; |
| 33 |
}; |
| 34 |
|
| 35 |
static const struct sdio_device_id wl1271_devices[] = { |
| 36 |
{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, |
| 37 |
{} |
| 38 |
}; |
| 39 |
MODULE_DEVICE_TABLE(sdio, wl1271_devices); |
| 40 |
|
| 41 |
static void wl1271_sdio_set_block_size(struct device *child, |
| 42 |
unsigned int blksz) |
| 43 |
{ |
| 44 |
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| 45 |
struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| 46 |
|
| 47 |
sdio_claim_host(func); |
| 48 |
sdio_set_block_size(func, blksz); |
| 49 |
sdio_release_host(func); |
| 50 |
} |
| 51 |
|
| 52 |
static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr, |
| 53 |
void *buf, size_t len, bool fixed) |
| 54 |
{ |
| 55 |
int ret; |
| 56 |
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| 57 |
struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| 58 |
|
| 59 |
sdio_claim_host(func); |
| 60 |
|
| 61 |
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { |
| 62 |
((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); |
| 63 |
dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n", |
| 64 |
addr, ((u8 *)buf)[0]); |
| 65 |
} else { |
| 66 |
if (fixed) |
| 67 |
ret = sdio_readsb(func, buf, addr, len); |
| 68 |
else |
| 69 |
ret = sdio_memcpy_fromio(func, buf, addr, len); |
| 70 |
|
| 71 |
dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n", |
| 72 |
addr, len); |
| 73 |
} |
| 74 |
|
| 75 |
sdio_release_host(func); |
| 76 |
|
| 77 |
if (ret) |
| 78 |
dev_err_ratelimited(child->parent, "sdio read failed (%d)\n", ret); |
| 79 |
|
| 80 |
if (unlikely(dump)) { |
| 81 |
printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr); |
| 82 |
print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ", |
| 83 |
DUMP_PREFIX_OFFSET, 16, 1, |
| 84 |
buf, len, false); |
| 85 |
} |
| 86 |
|
| 87 |
return ret; |
| 88 |
} |
| 89 |
|
| 90 |
static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr, |
| 91 |
void *buf, size_t len, bool fixed) |
| 92 |
{ |
| 93 |
int ret; |
| 94 |
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| 95 |
struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| 96 |
|
| 97 |
sdio_claim_host(func); |
| 98 |
|
| 99 |
if (unlikely(dump)) { |
| 100 |
printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr); |
| 101 |
print_hex_dump(KERN_DEBUG, "wlcore_sdio: WRITE ", |
| 102 |
DUMP_PREFIX_OFFSET, 16, 1, |
| 103 |
buf, len, false); |
| 104 |
} |
| 105 |
|
| 106 |
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) { |
| 107 |
sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); |
| 108 |
dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n", |
| 109 |
addr, ((u8 *)buf)[0]); |
| 110 |
} else { |
| 111 |
dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n", |
| 112 |
addr, len); |
| 113 |
|
| 114 |
if (fixed) |
| 115 |
ret = sdio_writesb(func, addr, buf, len); |
| 116 |
else |
| 117 |
ret = sdio_memcpy_toio(func, addr, buf, len); |
| 118 |
} |
| 119 |
|
| 120 |
sdio_release_host(func); |
| 121 |
|
| 122 |
if (ret) |
| 123 |
dev_err_ratelimited(child->parent, "sdio write failed (%d)\n", ret); |
| 124 |
|
| 125 |
return ret; |
| 126 |
} |
| 127 |
|
| 128 |
static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) |
| 129 |
{ |
| 130 |
int ret; |
| 131 |
struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| 132 |
struct mmc_card *card = func->card; |
| 133 |
|
| 134 |
ret = pm_runtime_resume_and_get(&card->dev); |
| 135 |
if (ret < 0) { |
| 136 |
dev_err(glue->dev, "%s: failed to get_sync(%d)\n", |
| 137 |
__func__, ret); |
| 138 |
|
| 139 |
return ret; |
| 140 |
} |
| 141 |
|
| 142 |
sdio_claim_host(func); |
| 143 |
/* |
| 144 |
* To guarantee that the SDIO card is power cycled, as required to make |
| 145 |
* the FW programming to succeed, let's do a brute force HW reset. |
| 146 |
*/ |
| 147 |
mmc_hw_reset(card); |
| 148 |
|
| 149 |
sdio_enable_func(func); |
| 150 |
sdio_release_host(func); |
| 151 |
|
| 152 |
return 0; |
| 153 |
} |
| 154 |
|
| 155 |
static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) |
| 156 |
{ |
| 157 |
struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| 158 |
struct mmc_card *card = func->card; |
| 159 |
|
| 160 |
sdio_claim_host(func); |
| 161 |
sdio_disable_func(func); |
| 162 |
sdio_release_host(func); |
| 163 |
|
| 164 |
/* Let runtime PM know the card is powered off */ |
| 165 |
pm_runtime_put(&card->dev); |
| 166 |
return 0; |
| 167 |
} |
| 168 |
|
| 169 |
static int wl12xx_sdio_set_power(struct device *child, bool enable) |
| 170 |
{ |
| 171 |
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| 172 |
|
| 173 |
if (enable) |
| 174 |
return wl12xx_sdio_power_on(glue); |
| 175 |
else |
| 176 |
return wl12xx_sdio_power_off(glue); |
| 177 |
} |
| 178 |
|
| 179 |
static struct wl1271_if_operations sdio_ops = { |
| 180 |
.read = wl12xx_sdio_raw_read, |
| 181 |
.write = wl12xx_sdio_raw_write, |
| 182 |
.power = wl12xx_sdio_set_power, |
| 183 |
.set_block_size = wl1271_sdio_set_block_size, |
| 184 |
}; |
| 185 |
|
| 186 |
#ifdef CONFIG_OF |
| 187 |
|
| 188 |
static const struct wilink_family_data wl127x_data = { |
| 189 |
.name = "wl127x", |
| 190 |
.nvs_name = "ti-connectivity/wl127x-nvs.bin", |
| 191 |
}; |
| 192 |
|
| 193 |
static const struct wilink_family_data wl128x_data = { |
| 194 |
.name = "wl128x", |
| 195 |
.nvs_name = "ti-connectivity/wl128x-nvs.bin", |
| 196 |
}; |
| 197 |
|
| 198 |
static const struct wilink_family_data wl18xx_data = { |
| 199 |
.name = "wl18xx", |
| 200 |
.cfg_name = "ti-connectivity/wl18xx-conf.bin", |
| 201 |
.nvs_name = "ti-connectivity/wl1271-nvs.bin", |
| 202 |
}; |
| 203 |
|
| 204 |
static const struct of_device_id wlcore_sdio_of_match_table[] = { |
| 205 |
{ .compatible = "ti,wl1271", .data = &wl127x_data }, |
| 206 |
{ .compatible = "ti,wl1273", .data = &wl127x_data }, |
| 207 |
{ .compatible = "ti,wl1281", .data = &wl128x_data }, |
| 208 |
{ .compatible = "ti,wl1283", .data = &wl128x_data }, |
| 209 |
{ .compatible = "ti,wl1285", .data = &wl128x_data }, |
| 210 |
{ .compatible = "ti,wl1801", .data = &wl18xx_data }, |
| 211 |
{ .compatible = "ti,wl1805", .data = &wl18xx_data }, |
| 212 |
{ .compatible = "ti,wl1807", .data = &wl18xx_data }, |
| 213 |
{ .compatible = "ti,wl1831", .data = &wl18xx_data }, |
| 214 |
{ .compatible = "ti,wl1835", .data = &wl18xx_data }, |
| 215 |
{ .compatible = "ti,wl1837", .data = &wl18xx_data }, |
| 216 |
{ } |
| 217 |
}; |
| 218 |
|
| 219 |
static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq, |
| 220 |
struct wlcore_platdev_data *pdev_data) |
| 221 |
{ |
| 222 |
struct device_node *np = dev->of_node; |
| 223 |
const struct of_device_id *of_id; |
| 224 |
|
| 225 |
of_id = of_match_node(wlcore_sdio_of_match_table, np); |
| 226 |
if (!of_id) |
| 227 |
return -ENODEV; |
| 228 |
|
| 229 |
pdev_data->family = of_id->data; |
| 230 |
|
| 231 |
*irq = irq_of_parse_and_map(np, 0); |
| 232 |
if (!*irq) { |
| 233 |
dev_err(dev, "No irq in platform data\n"); |
| 234 |
return -EINVAL; |
| 235 |
} |
| 236 |
|
| 237 |
*wakeirq = irq_of_parse_and_map(np, 1); |
| 238 |
|
| 239 |
/* optional clock frequency params */ |
| 240 |
of_property_read_u32(np, "ref-clock-frequency", |
| 241 |
&pdev_data->ref_clock_freq); |
| 242 |
of_property_read_u32(np, "tcxo-clock-frequency", |
| 243 |
&pdev_data->tcxo_clock_freq); |
| 244 |
|
| 245 |
return 0; |
| 246 |
} |
| 247 |
#else |
| 248 |
static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq, |
| 249 |
struct wlcore_platdev_data *pdev_data) |
| 250 |
{ |
| 251 |
return -ENODATA; |
| 252 |
} |
| 253 |
#endif |
| 254 |
|
| 255 |
static int wl1271_probe(struct sdio_func *func, |
| 256 |
const struct sdio_device_id *id) |
| 257 |
{ |
| 258 |
struct wlcore_platdev_data *pdev_data; |
| 259 |
struct wl12xx_sdio_glue *glue; |
| 260 |
struct resource res[2]; |
| 261 |
mmc_pm_flag_t mmcflags; |
| 262 |
int ret = -ENOMEM; |
| 263 |
int irq, wakeirq, num_irqs; |
| 264 |
const char *chip_family; |
| 265 |
|
| 266 |
/* We are only able to handle the wlan function */ |
| 267 |
if (func->num != 0x02) |
| 268 |
return -ENODEV; |
| 269 |
|
| 270 |
pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL); |
| 271 |
if (!pdev_data) |
| 272 |
return -ENOMEM; |
| 273 |
|
| 274 |
pdev_data->if_ops = &sdio_ops; |
| 275 |
|
| 276 |
glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL); |
| 277 |
if (!glue) |
| 278 |
return -ENOMEM; |
| 279 |
|
| 280 |
glue->dev = &func->dev; |
| 281 |
|
| 282 |
/* Grab access to FN0 for ELP reg. */ |
| 283 |
func->card->quirks |= MMC_QUIRK_LENIENT_FN0; |
| 284 |
|
| 285 |
/* Use block mode for transferring over one block size of data */ |
| 286 |
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; |
| 287 |
|
| 288 |
ret = wlcore_probe_of(&func->dev, &irq, &wakeirq, pdev_data); |
| 289 |
if (ret) |
| 290 |
goto out; |
| 291 |
|
| 292 |
/* if sdio can keep power while host is suspended, enable wow */ |
| 293 |
mmcflags = sdio_get_host_pm_caps(func); |
| 294 |
dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); |
| 295 |
|
| 296 |
if (mmcflags & MMC_PM_KEEP_POWER) |
| 297 |
pdev_data->pwr_in_suspend = true; |
| 298 |
|
| 299 |
sdio_set_drvdata(func, glue); |
| 300 |
|
| 301 |
/* Tell PM core that we don't need the card to be powered now */ |
| 302 |
pm_runtime_put_noidle(&func->dev); |
| 303 |
|
| 304 |
/* |
| 305 |
* Due to a hardware bug, we can't differentiate wl18xx from |
| 306 |
* wl12xx, because both report the same device ID. The only |
| 307 |
* way to differentiate is by checking the SDIO revision, |
| 308 |
* which is 3.00 on the wl18xx chips. |
| 309 |
*/ |
| 310 |
if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00) |
| 311 |
chip_family = "wl18xx"; |
| 312 |
else |
| 313 |
chip_family = "wl12xx"; |
| 314 |
|
| 315 |
glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO); |
| 316 |
if (!glue->core) { |
| 317 |
dev_err(glue->dev, "can't allocate platform_device"); |
| 318 |
ret = -ENOMEM; |
| 319 |
goto out; |
| 320 |
} |
| 321 |
|
| 322 |
glue->core->dev.parent = &func->dev; |
| 323 |
|
| 324 |
memset(res, 0x00, sizeof(res)); |
| 325 |
|
| 326 |
res[0] = DEFINE_RES_IRQ_NAMED(irq, "irq"); |
| 327 |
res[0].flags |= irq_get_trigger_type(irq); |
| 328 |
|
| 329 |
if (wakeirq > 0) { |
| 330 |
res[1] = DEFINE_RES_IRQ_NAMED(wakeirq, "wakeirq"); |
| 331 |
res[1].flags |= irq_get_trigger_type(wakeirq); |
| 332 |
num_irqs = 2; |
| 333 |
} else { |
| 334 |
num_irqs = 1; |
| 335 |
} |
| 336 |
ret = platform_device_add_resources(glue->core, res, num_irqs); |
| 337 |
if (ret) { |
| 338 |
dev_err(glue->dev, "can't add resources\n"); |
| 339 |
goto out_dev_put; |
| 340 |
} |
| 341 |
|
| 342 |
ret = platform_device_add_data(glue->core, pdev_data, |
| 343 |
sizeof(*pdev_data)); |
| 344 |
if (ret) { |
| 345 |
dev_err(glue->dev, "can't add platform data\n"); |
| 346 |
goto out_dev_put; |
| 347 |
} |
| 348 |
|
| 349 |
ret = platform_device_add(glue->core); |
| 350 |
if (ret) { |
| 351 |
dev_err(glue->dev, "can't add platform device\n"); |
| 352 |
goto out_dev_put; |
| 353 |
} |
| 354 |
return 0; |
| 355 |
|
| 356 |
out_dev_put: |
| 357 |
platform_device_put(glue->core); |
| 358 |
|
| 359 |
out: |
| 360 |
return ret; |
| 361 |
} |
| 362 |
|
| 363 |
static void wl1271_remove(struct sdio_func *func) |
| 364 |
{ |
| 365 |
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); |
| 366 |
|
| 367 |
/* Undo decrement done above in wl1271_probe */ |
| 368 |
pm_runtime_get_noresume(&func->dev); |
| 369 |
|
| 370 |
platform_device_unregister(glue->core); |
| 371 |
} |
| 372 |
|
| 373 |
static int wl1271_suspend(struct device *dev) |
| 374 |
{ |
| 375 |
/* Tell MMC/SDIO core it's OK to power down the card |
| 376 |
* (if it isn't already), but not to remove it completely */ |
| 377 |
struct sdio_func *func = dev_to_sdio_func(dev); |
| 378 |
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); |
| 379 |
struct wl1271 *wl = platform_get_drvdata(glue->core); |
| 380 |
mmc_pm_flag_t sdio_flags; |
| 381 |
int ret = 0; |
| 382 |
|
| 383 |
if (!wl) { |
| 384 |
dev_err(dev, "no wilink module was probed\n"); |
| 385 |
goto out; |
| 386 |
} |
| 387 |
|
| 388 |
dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n", |
| 389 |
wl->wow_enabled); |
| 390 |
|
| 391 |
/* check whether sdio should keep power */ |
| 392 |
if (wl->wow_enabled) { |
| 393 |
sdio_flags = sdio_get_host_pm_caps(func); |
| 394 |
|
| 395 |
if (!(sdio_flags & MMC_PM_KEEP_POWER)) { |
| 396 |
dev_err(dev, "can't keep power while host " |
| 397 |
"is suspended\n"); |
| 398 |
ret = -EINVAL; |
| 399 |
goto out; |
| 400 |
} |
| 401 |
|
| 402 |
/* keep power while host suspended */ |
| 403 |
ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| 404 |
if (ret) { |
| 405 |
dev_err(dev, "error while trying to keep power\n"); |
| 406 |
goto out; |
| 407 |
} |
| 408 |
} |
| 409 |
out: |
| 410 |
return ret; |
| 411 |
} |
| 412 |
|
| 413 |
static int wl1271_resume(struct device *dev) |
| 414 |
{ |
| 415 |
dev_dbg(dev, "wl1271 resume\n"); |
| 416 |
|
| 417 |
return 0; |
| 418 |
} |
| 419 |
|
| 420 |
static const struct dev_pm_ops wl1271_sdio_pm_ops = { |
| 421 |
.suspend = wl1271_suspend, |
| 422 |
.resume = wl1271_resume, |
| 423 |
}; |
| 424 |
|
| 425 |
static struct sdio_driver wl1271_sdio_driver = { |
| 426 |
.name = "wl1271_sdio", |
| 427 |
.id_table = wl1271_devices, |
| 428 |
.probe = wl1271_probe, |
| 429 |
.remove = wl1271_remove, |
| 430 |
.drv = { |
| 431 |
.pm = pm_ptr(&wl1271_sdio_pm_ops), |
| 432 |
}, |
| 433 |
}; |
| 434 |
|
| 435 |
module_sdio_driver(wl1271_sdio_driver); |
| 436 |
|
| 437 |
module_param(dump, bool, 0600); |
| 438 |
MODULE_PARM_DESC(dump, "Enable sdio read/write dumps."); |
| 439 |
|
| 440 |
MODULE_DESCRIPTION("TI WLAN SDIO helpers"); |
| 441 |
MODULE_LICENSE("GPL"); |
| 442 |
MODULE_AUTHOR("Luciano Coelho <[email protected]>"); |
| 443 |
MODULE_AUTHOR("Juuso Oikarinen <[email protected]>"); |