| 1 |
/* SPDX-License-Identifier: GPL-2.0-only */ |
| 2 |
/* |
| 3 |
* This file is part of wl1271 |
| 4 |
* |
| 5 |
* Copyright (C) 2009 Nokia Corporation |
| 6 |
* |
| 7 |
* Contact: Luciano Coelho <[email protected]> |
| 8 |
*/ |
| 9 |
|
| 10 |
#ifndef __CONF_H__ |
| 11 |
#define __CONF_H__ |
| 12 |
|
| 13 |
enum { |
| 14 |
CONF_HW_BIT_RATE_1MBPS = BIT(0), |
| 15 |
CONF_HW_BIT_RATE_2MBPS = BIT(1), |
| 16 |
CONF_HW_BIT_RATE_5_5MBPS = BIT(2), |
| 17 |
CONF_HW_BIT_RATE_6MBPS = BIT(3), |
| 18 |
CONF_HW_BIT_RATE_9MBPS = BIT(4), |
| 19 |
CONF_HW_BIT_RATE_11MBPS = BIT(5), |
| 20 |
CONF_HW_BIT_RATE_12MBPS = BIT(6), |
| 21 |
CONF_HW_BIT_RATE_18MBPS = BIT(7), |
| 22 |
CONF_HW_BIT_RATE_22MBPS = BIT(8), |
| 23 |
CONF_HW_BIT_RATE_24MBPS = BIT(9), |
| 24 |
CONF_HW_BIT_RATE_36MBPS = BIT(10), |
| 25 |
CONF_HW_BIT_RATE_48MBPS = BIT(11), |
| 26 |
CONF_HW_BIT_RATE_54MBPS = BIT(12), |
| 27 |
CONF_HW_BIT_RATE_MCS_0 = BIT(13), |
| 28 |
CONF_HW_BIT_RATE_MCS_1 = BIT(14), |
| 29 |
CONF_HW_BIT_RATE_MCS_2 = BIT(15), |
| 30 |
CONF_HW_BIT_RATE_MCS_3 = BIT(16), |
| 31 |
CONF_HW_BIT_RATE_MCS_4 = BIT(17), |
| 32 |
CONF_HW_BIT_RATE_MCS_5 = BIT(18), |
| 33 |
CONF_HW_BIT_RATE_MCS_6 = BIT(19), |
| 34 |
CONF_HW_BIT_RATE_MCS_7 = BIT(20), |
| 35 |
CONF_HW_BIT_RATE_MCS_8 = BIT(21), |
| 36 |
CONF_HW_BIT_RATE_MCS_9 = BIT(22), |
| 37 |
CONF_HW_BIT_RATE_MCS_10 = BIT(23), |
| 38 |
CONF_HW_BIT_RATE_MCS_11 = BIT(24), |
| 39 |
CONF_HW_BIT_RATE_MCS_12 = BIT(25), |
| 40 |
CONF_HW_BIT_RATE_MCS_13 = BIT(26), |
| 41 |
CONF_HW_BIT_RATE_MCS_14 = BIT(27), |
| 42 |
CONF_HW_BIT_RATE_MCS_15 = BIT(28), |
| 43 |
}; |
| 44 |
|
| 45 |
enum { |
| 46 |
CONF_HW_RATE_INDEX_1MBPS = 0, |
| 47 |
CONF_HW_RATE_INDEX_2MBPS = 1, |
| 48 |
CONF_HW_RATE_INDEX_5_5MBPS = 2, |
| 49 |
CONF_HW_RATE_INDEX_11MBPS = 3, |
| 50 |
CONF_HW_RATE_INDEX_6MBPS = 4, |
| 51 |
CONF_HW_RATE_INDEX_9MBPS = 5, |
| 52 |
CONF_HW_RATE_INDEX_12MBPS = 6, |
| 53 |
CONF_HW_RATE_INDEX_18MBPS = 7, |
| 54 |
CONF_HW_RATE_INDEX_24MBPS = 8, |
| 55 |
CONF_HW_RATE_INDEX_36MBPS = 9, |
| 56 |
CONF_HW_RATE_INDEX_48MBPS = 10, |
| 57 |
CONF_HW_RATE_INDEX_54MBPS = 11, |
| 58 |
CONF_HW_RATE_INDEX_MCS0 = 12, |
| 59 |
CONF_HW_RATE_INDEX_MCS1 = 13, |
| 60 |
CONF_HW_RATE_INDEX_MCS2 = 14, |
| 61 |
CONF_HW_RATE_INDEX_MCS3 = 15, |
| 62 |
CONF_HW_RATE_INDEX_MCS4 = 16, |
| 63 |
CONF_HW_RATE_INDEX_MCS5 = 17, |
| 64 |
CONF_HW_RATE_INDEX_MCS6 = 18, |
| 65 |
CONF_HW_RATE_INDEX_MCS7 = 19, |
| 66 |
CONF_HW_RATE_INDEX_MCS7_SGI = 20, |
| 67 |
CONF_HW_RATE_INDEX_MCS0_40MHZ = 21, |
| 68 |
CONF_HW_RATE_INDEX_MCS1_40MHZ = 22, |
| 69 |
CONF_HW_RATE_INDEX_MCS2_40MHZ = 23, |
| 70 |
CONF_HW_RATE_INDEX_MCS3_40MHZ = 24, |
| 71 |
CONF_HW_RATE_INDEX_MCS4_40MHZ = 25, |
| 72 |
CONF_HW_RATE_INDEX_MCS5_40MHZ = 26, |
| 73 |
CONF_HW_RATE_INDEX_MCS6_40MHZ = 27, |
| 74 |
CONF_HW_RATE_INDEX_MCS7_40MHZ = 28, |
| 75 |
CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI = 29, |
| 76 |
|
| 77 |
/* MCS8+ rates overlap with 40Mhz rates */ |
| 78 |
CONF_HW_RATE_INDEX_MCS8 = 21, |
| 79 |
CONF_HW_RATE_INDEX_MCS9 = 22, |
| 80 |
CONF_HW_RATE_INDEX_MCS10 = 23, |
| 81 |
CONF_HW_RATE_INDEX_MCS11 = 24, |
| 82 |
CONF_HW_RATE_INDEX_MCS12 = 25, |
| 83 |
CONF_HW_RATE_INDEX_MCS13 = 26, |
| 84 |
CONF_HW_RATE_INDEX_MCS14 = 27, |
| 85 |
CONF_HW_RATE_INDEX_MCS15 = 28, |
| 86 |
CONF_HW_RATE_INDEX_MCS15_SGI = 29, |
| 87 |
|
| 88 |
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI, |
| 89 |
}; |
| 90 |
|
| 91 |
#define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff |
| 92 |
|
| 93 |
enum { |
| 94 |
CONF_SG_DISABLE = 0, |
| 95 |
CONF_SG_PROTECTIVE, |
| 96 |
CONF_SG_OPPORTUNISTIC |
| 97 |
}; |
| 98 |
|
| 99 |
#define WLCORE_CONF_SG_PARAMS_MAX 67 |
| 100 |
#define WLCORE_CONF_SG_PARAMS_ALL 0xff |
| 101 |
|
| 102 |
struct conf_sg_settings { |
| 103 |
u32 params[WLCORE_CONF_SG_PARAMS_MAX]; |
| 104 |
u8 state; |
| 105 |
} __packed; |
| 106 |
|
| 107 |
enum conf_rx_queue_type { |
| 108 |
CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ |
| 109 |
CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ |
| 110 |
}; |
| 111 |
|
| 112 |
struct conf_rx_settings { |
| 113 |
/* |
| 114 |
* The maximum amount of time, in TU, before the |
| 115 |
* firmware discards the MSDU. |
| 116 |
* |
| 117 |
* Range: 0 - 0xFFFFFFFF |
| 118 |
*/ |
| 119 |
u32 rx_msdu_life_time; |
| 120 |
|
| 121 |
/* |
| 122 |
* Packet detection threshold in the PHY. |
| 123 |
* |
| 124 |
* FIXME: details unknown. |
| 125 |
*/ |
| 126 |
u32 packet_detection_threshold; |
| 127 |
|
| 128 |
/* |
| 129 |
* The longest time the STA will wait to receive traffic from the AP |
| 130 |
* after a PS-poll has been transmitted. |
| 131 |
* |
| 132 |
* Range: 0 - 200000 |
| 133 |
*/ |
| 134 |
u16 ps_poll_timeout; |
| 135 |
/* |
| 136 |
* The longest time the STA will wait to receive traffic from the AP |
| 137 |
* after a frame has been sent from an UPSD enabled queue. |
| 138 |
* |
| 139 |
* Range: 0 - 200000 |
| 140 |
*/ |
| 141 |
u16 upsd_timeout; |
| 142 |
|
| 143 |
/* |
| 144 |
* The number of octets in an MPDU, below which an RTS/CTS |
| 145 |
* handshake is not performed. |
| 146 |
* |
| 147 |
* Range: 0 - 4096 |
| 148 |
*/ |
| 149 |
u16 rts_threshold; |
| 150 |
|
| 151 |
/* |
| 152 |
* The RX Clear Channel Assessment threshold in the PHY |
| 153 |
* (the energy threshold). |
| 154 |
* |
| 155 |
* Range: ENABLE_ENERGY_D == 0x140A |
| 156 |
* DISABLE_ENERGY_D == 0xFFEF |
| 157 |
*/ |
| 158 |
u16 rx_cca_threshold; |
| 159 |
|
| 160 |
/* |
| 161 |
* Occupied Rx mem-blocks number which requires interrupting the host |
| 162 |
* (0 = no buffering, 0xffff = disabled). |
| 163 |
* |
| 164 |
* Range: u16 |
| 165 |
*/ |
| 166 |
u16 irq_blk_threshold; |
| 167 |
|
| 168 |
/* |
| 169 |
* Rx packets number which requires interrupting the host |
| 170 |
* (0 = no buffering). |
| 171 |
* |
| 172 |
* Range: u16 |
| 173 |
*/ |
| 174 |
u16 irq_pkt_threshold; |
| 175 |
|
| 176 |
/* |
| 177 |
* Max time in msec the FW may delay RX-Complete interrupt. |
| 178 |
* |
| 179 |
* Range: 1 - 100 |
| 180 |
*/ |
| 181 |
u16 irq_timeout; |
| 182 |
|
| 183 |
/* |
| 184 |
* The RX queue type. |
| 185 |
* |
| 186 |
* Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, |
| 187 |
*/ |
| 188 |
u8 queue_type; |
| 189 |
} __packed; |
| 190 |
|
| 191 |
#define CONF_TX_MAX_RATE_CLASSES 10 |
| 192 |
|
| 193 |
#define CONF_TX_RATE_MASK_UNSPECIFIED 0 |
| 194 |
#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ |
| 195 |
CONF_HW_BIT_RATE_2MBPS) |
| 196 |
#define CONF_TX_RATE_RETRY_LIMIT 10 |
| 197 |
|
| 198 |
/* basic rates for p2p operations (probe req/resp, etc.) */ |
| 199 |
#define CONF_TX_RATE_MASK_BASIC_P2P CONF_HW_BIT_RATE_6MBPS |
| 200 |
|
| 201 |
/* |
| 202 |
* Rates supported for data packets when operating as STA/AP. Note the absence |
| 203 |
* of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop |
| 204 |
* one. The rate dropped is not mandatory under any operating mode. |
| 205 |
*/ |
| 206 |
#define CONF_TX_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
| 207 |
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
| 208 |
CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \ |
| 209 |
CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \ |
| 210 |
CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \ |
| 211 |
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ |
| 212 |
CONF_HW_BIT_RATE_54MBPS) |
| 213 |
|
| 214 |
#define CONF_TX_CCK_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
| 215 |
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
| 216 |
CONF_HW_BIT_RATE_11MBPS) |
| 217 |
|
| 218 |
#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \ |
| 219 |
CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \ |
| 220 |
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ |
| 221 |
CONF_HW_BIT_RATE_54MBPS) |
| 222 |
|
| 223 |
#define CONF_TX_MCS_RATES (CONF_HW_BIT_RATE_MCS_0 | \ |
| 224 |
CONF_HW_BIT_RATE_MCS_1 | CONF_HW_BIT_RATE_MCS_2 | \ |
| 225 |
CONF_HW_BIT_RATE_MCS_3 | CONF_HW_BIT_RATE_MCS_4 | \ |
| 226 |
CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \ |
| 227 |
CONF_HW_BIT_RATE_MCS_7) |
| 228 |
|
| 229 |
#define CONF_TX_MIMO_RATES (CONF_HW_BIT_RATE_MCS_8 | \ |
| 230 |
CONF_HW_BIT_RATE_MCS_9 | CONF_HW_BIT_RATE_MCS_10 | \ |
| 231 |
CONF_HW_BIT_RATE_MCS_11 | CONF_HW_BIT_RATE_MCS_12 | \ |
| 232 |
CONF_HW_BIT_RATE_MCS_13 | CONF_HW_BIT_RATE_MCS_14 | \ |
| 233 |
CONF_HW_BIT_RATE_MCS_15) |
| 234 |
|
| 235 |
/* |
| 236 |
* Default rates for management traffic when operating in AP mode. This |
| 237 |
* should be configured according to the basic rate set of the AP |
| 238 |
*/ |
| 239 |
#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
| 240 |
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS) |
| 241 |
|
| 242 |
/* default rates for working as IBSS (11b and OFDM) */ |
| 243 |
#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
| 244 |
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
| 245 |
CONF_HW_BIT_RATE_11MBPS | CONF_TX_OFDM_RATES); |
| 246 |
|
| 247 |
struct conf_tx_rate_class { |
| 248 |
|
| 249 |
/* |
| 250 |
* The rates enabled for this rate class. |
| 251 |
* |
| 252 |
* Range: CONF_HW_BIT_RATE_* bit mask |
| 253 |
*/ |
| 254 |
u32 enabled_rates; |
| 255 |
|
| 256 |
/* |
| 257 |
* The dot11 short retry limit used for TX retries. |
| 258 |
* |
| 259 |
* Range: u8 |
| 260 |
*/ |
| 261 |
u8 short_retry_limit; |
| 262 |
|
| 263 |
/* |
| 264 |
* The dot11 long retry limit used for TX retries. |
| 265 |
* |
| 266 |
* Range: u8 |
| 267 |
*/ |
| 268 |
u8 long_retry_limit; |
| 269 |
|
| 270 |
/* |
| 271 |
* Flags controlling the attributes of TX transmission. |
| 272 |
* |
| 273 |
* Range: bit 0: Truncate - when set, FW attempts to send a frame stop |
| 274 |
* when the total valid per-rate attempts have |
| 275 |
* been exhausted; otherwise transmissions |
| 276 |
* will continue at the lowest available rate |
| 277 |
* until the appropriate one of the |
| 278 |
* short_retry_limit, long_retry_limit, |
| 279 |
* dot11_max_transmit_msdu_life_time, or |
| 280 |
* max_tx_life_time, is exhausted. |
| 281 |
* 1: Preamble Override - indicates if the preamble type |
| 282 |
* should be used in TX. |
| 283 |
* 2: Preamble Type - the type of the preamble to be used by |
| 284 |
* the policy (0 - long preamble, 1 - short preamble. |
| 285 |
*/ |
| 286 |
u8 aflags; |
| 287 |
} __packed; |
| 288 |
|
| 289 |
#define CONF_TX_MAX_AC_COUNT 4 |
| 290 |
|
| 291 |
/* Slot number setting to start transmission at PIFS interval */ |
| 292 |
#define CONF_TX_AIFS_PIFS 1 |
| 293 |
/* Slot number setting to start transmission at DIFS interval normal |
| 294 |
* DCF access */ |
| 295 |
#define CONF_TX_AIFS_DIFS 2 |
| 296 |
|
| 297 |
|
| 298 |
enum conf_tx_ac { |
| 299 |
CONF_TX_AC_BE = 0, /* best effort / legacy */ |
| 300 |
CONF_TX_AC_BK = 1, /* background */ |
| 301 |
CONF_TX_AC_VI = 2, /* video */ |
| 302 |
CONF_TX_AC_VO = 3, /* voice */ |
| 303 |
CONF_TX_AC_CTS2SELF = 4, /* fictitious AC, follows AC_VO */ |
| 304 |
CONF_TX_AC_ANY_TID = 0xff |
| 305 |
}; |
| 306 |
|
| 307 |
struct conf_tx_ac_category { |
| 308 |
/* |
| 309 |
* The AC class identifier. |
| 310 |
* |
| 311 |
* Range: enum conf_tx_ac |
| 312 |
*/ |
| 313 |
u8 ac; |
| 314 |
|
| 315 |
/* |
| 316 |
* The contention window minimum size (in slots) for the access |
| 317 |
* class. |
| 318 |
* |
| 319 |
* Range: u8 |
| 320 |
*/ |
| 321 |
u8 cw_min; |
| 322 |
|
| 323 |
/* |
| 324 |
* The contention window maximum size (in slots) for the access |
| 325 |
* class. |
| 326 |
* |
| 327 |
* Range: u8 |
| 328 |
*/ |
| 329 |
u16 cw_max; |
| 330 |
|
| 331 |
/* |
| 332 |
* The AIF value (in slots) for the access class. |
| 333 |
* |
| 334 |
* Range: u8 |
| 335 |
*/ |
| 336 |
u8 aifsn; |
| 337 |
|
| 338 |
/* |
| 339 |
* The TX Op Limit (in microseconds) for the access class. |
| 340 |
* |
| 341 |
* Range: u16 |
| 342 |
*/ |
| 343 |
u16 tx_op_limit; |
| 344 |
} __packed; |
| 345 |
|
| 346 |
#define CONF_TX_MAX_TID_COUNT 8 |
| 347 |
|
| 348 |
/* Allow TX BA on all TIDs but 6,7. These are currently reserved in the FW */ |
| 349 |
#define CONF_TX_BA_ENABLED_TID_BITMAP 0x3F |
| 350 |
|
| 351 |
enum { |
| 352 |
CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ |
| 353 |
CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ |
| 354 |
CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ |
| 355 |
}; |
| 356 |
|
| 357 |
enum { |
| 358 |
CONF_PS_SCHEME_LEGACY = 0, |
| 359 |
CONF_PS_SCHEME_UPSD_TRIGGER = 1, |
| 360 |
CONF_PS_SCHEME_LEGACY_PSPOLL = 2, |
| 361 |
CONF_PS_SCHEME_SAPSD = 3, |
| 362 |
}; |
| 363 |
|
| 364 |
enum { |
| 365 |
CONF_ACK_POLICY_LEGACY = 0, |
| 366 |
CONF_ACK_POLICY_NO_ACK = 1, |
| 367 |
CONF_ACK_POLICY_BLOCK = 2, |
| 368 |
}; |
| 369 |
|
| 370 |
|
| 371 |
struct conf_tx_tid { |
| 372 |
u8 queue_id; |
| 373 |
u8 channel_type; |
| 374 |
u8 tsid; |
| 375 |
u8 ps_scheme; |
| 376 |
u8 ack_policy; |
| 377 |
u32 apsd_conf[2]; |
| 378 |
} __packed; |
| 379 |
|
| 380 |
struct conf_tx_settings { |
| 381 |
/* |
| 382 |
* The TX ED value for TELEC Enable/Disable. |
| 383 |
* |
| 384 |
* Range: 0, 1 |
| 385 |
*/ |
| 386 |
u8 tx_energy_detection; |
| 387 |
|
| 388 |
/* |
| 389 |
* Configuration for rate classes for TX (currently only one |
| 390 |
* rate class supported). Used in non-AP mode. |
| 391 |
*/ |
| 392 |
struct conf_tx_rate_class sta_rc_conf; |
| 393 |
|
| 394 |
/* |
| 395 |
* Configuration for access categories for TX rate control. |
| 396 |
*/ |
| 397 |
u8 ac_conf_count; |
| 398 |
struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; |
| 399 |
|
| 400 |
/* |
| 401 |
* AP-mode - allow this number of TX retries to a station before an |
| 402 |
* event is triggered from FW. |
| 403 |
* In AP-mode the hlids of unreachable stations are given in the |
| 404 |
* "sta_tx_retry_exceeded" member in the event mailbox. |
| 405 |
*/ |
| 406 |
u8 max_tx_retries; |
| 407 |
|
| 408 |
/* |
| 409 |
* AP-mode - after this number of seconds a connected station is |
| 410 |
* considered inactive. |
| 411 |
*/ |
| 412 |
u16 ap_aging_period; |
| 413 |
|
| 414 |
/* |
| 415 |
* Configuration for TID parameters. |
| 416 |
*/ |
| 417 |
u8 tid_conf_count; |
| 418 |
struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; |
| 419 |
|
| 420 |
/* |
| 421 |
* The TX fragmentation threshold. |
| 422 |
* |
| 423 |
* Range: u16 |
| 424 |
*/ |
| 425 |
u16 frag_threshold; |
| 426 |
|
| 427 |
/* |
| 428 |
* Max time in msec the FW may delay frame TX-Complete interrupt. |
| 429 |
* |
| 430 |
* Range: u16 |
| 431 |
*/ |
| 432 |
u16 tx_compl_timeout; |
| 433 |
|
| 434 |
/* |
| 435 |
* Completed TX packet count which requires to issue the TX-Complete |
| 436 |
* interrupt. |
| 437 |
* |
| 438 |
* Range: u16 |
| 439 |
*/ |
| 440 |
u16 tx_compl_threshold; |
| 441 |
|
| 442 |
/* |
| 443 |
* The rate used for control messages and scanning on the 2.4GHz band |
| 444 |
* |
| 445 |
* Range: CONF_HW_BIT_RATE_* bit mask |
| 446 |
*/ |
| 447 |
u32 basic_rate; |
| 448 |
|
| 449 |
/* |
| 450 |
* The rate used for control messages and scanning on the 5GHz band |
| 451 |
* |
| 452 |
* Range: CONF_HW_BIT_RATE_* bit mask |
| 453 |
*/ |
| 454 |
u32 basic_rate_5; |
| 455 |
|
| 456 |
/* |
| 457 |
* TX retry limits for templates |
| 458 |
*/ |
| 459 |
u8 tmpl_short_retry_limit; |
| 460 |
u8 tmpl_long_retry_limit; |
| 461 |
|
| 462 |
/* Time in ms for Tx watchdog timer to expire */ |
| 463 |
u32 tx_watchdog_timeout; |
| 464 |
|
| 465 |
/* |
| 466 |
* when a slow link has this much packets pending, it becomes a low |
| 467 |
* priority link, scheduling-wise |
| 468 |
*/ |
| 469 |
u8 slow_link_thold; |
| 470 |
|
| 471 |
/* |
| 472 |
* when a fast link has this much packets pending, it becomes a low |
| 473 |
* priority link, scheduling-wise |
| 474 |
*/ |
| 475 |
u8 fast_link_thold; |
| 476 |
} __packed; |
| 477 |
|
| 478 |
enum { |
| 479 |
CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ |
| 480 |
CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ |
| 481 |
CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ |
| 482 |
CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ |
| 483 |
CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F |
| 484 |
}; |
| 485 |
|
| 486 |
#define CONF_MAX_BCN_FILT_IE_COUNT 32 |
| 487 |
|
| 488 |
#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) |
| 489 |
#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) |
| 490 |
|
| 491 |
#define CONF_BCN_IE_OUI_LEN 3 |
| 492 |
#define CONF_BCN_IE_VER_LEN 2 |
| 493 |
|
| 494 |
struct conf_bcn_filt_rule { |
| 495 |
/* |
| 496 |
* IE number to which to associate a rule. |
| 497 |
* |
| 498 |
* Range: u8 |
| 499 |
*/ |
| 500 |
u8 ie; |
| 501 |
|
| 502 |
/* |
| 503 |
* Rule to associate with the specific ie. |
| 504 |
* |
| 505 |
* Range: CONF_BCN_RULE_PASS_ON_* |
| 506 |
*/ |
| 507 |
u8 rule; |
| 508 |
|
| 509 |
/* |
| 510 |
* OUI for the vendor specifie IE (221) |
| 511 |
*/ |
| 512 |
u8 oui[CONF_BCN_IE_OUI_LEN]; |
| 513 |
|
| 514 |
/* |
| 515 |
* Type for the vendor specifie IE (221) |
| 516 |
*/ |
| 517 |
u8 type; |
| 518 |
|
| 519 |
/* |
| 520 |
* Version for the vendor specifie IE (221) |
| 521 |
*/ |
| 522 |
u8 version[CONF_BCN_IE_VER_LEN]; |
| 523 |
} __packed; |
| 524 |
|
| 525 |
#define CONF_MAX_RSSI_SNR_TRIGGERS 8 |
| 526 |
|
| 527 |
enum { |
| 528 |
CONF_TRIG_METRIC_RSSI_BEACON = 0, |
| 529 |
CONF_TRIG_METRIC_RSSI_DATA, |
| 530 |
CONF_TRIG_METRIC_SNR_BEACON, |
| 531 |
CONF_TRIG_METRIC_SNR_DATA |
| 532 |
}; |
| 533 |
|
| 534 |
enum { |
| 535 |
CONF_TRIG_EVENT_TYPE_LEVEL = 0, |
| 536 |
CONF_TRIG_EVENT_TYPE_EDGE |
| 537 |
}; |
| 538 |
|
| 539 |
enum { |
| 540 |
CONF_TRIG_EVENT_DIR_LOW = 0, |
| 541 |
CONF_TRIG_EVENT_DIR_HIGH, |
| 542 |
CONF_TRIG_EVENT_DIR_BIDIR |
| 543 |
}; |
| 544 |
|
| 545 |
struct conf_sig_weights { |
| 546 |
|
| 547 |
/* |
| 548 |
* RSSI from beacons average weight. |
| 549 |
* |
| 550 |
* Range: u8 |
| 551 |
*/ |
| 552 |
u8 rssi_bcn_avg_weight; |
| 553 |
|
| 554 |
/* |
| 555 |
* RSSI from data average weight. |
| 556 |
* |
| 557 |
* Range: u8 |
| 558 |
*/ |
| 559 |
u8 rssi_pkt_avg_weight; |
| 560 |
|
| 561 |
/* |
| 562 |
* SNR from beacons average weight. |
| 563 |
* |
| 564 |
* Range: u8 |
| 565 |
*/ |
| 566 |
u8 snr_bcn_avg_weight; |
| 567 |
|
| 568 |
/* |
| 569 |
* SNR from data average weight. |
| 570 |
* |
| 571 |
* Range: u8 |
| 572 |
*/ |
| 573 |
u8 snr_pkt_avg_weight; |
| 574 |
} __packed; |
| 575 |
|
| 576 |
enum conf_bcn_filt_mode { |
| 577 |
CONF_BCN_FILT_MODE_DISABLED = 0, |
| 578 |
CONF_BCN_FILT_MODE_ENABLED = 1 |
| 579 |
}; |
| 580 |
|
| 581 |
enum conf_bet_mode { |
| 582 |
CONF_BET_MODE_DISABLE = 0, |
| 583 |
CONF_BET_MODE_ENABLE = 1, |
| 584 |
}; |
| 585 |
|
| 586 |
struct conf_conn_settings { |
| 587 |
/* |
| 588 |
* Firmware wakeup conditions configuration. The host may set only |
| 589 |
* one bit. |
| 590 |
* |
| 591 |
* Range: CONF_WAKE_UP_EVENT_* |
| 592 |
*/ |
| 593 |
u8 wake_up_event; |
| 594 |
|
| 595 |
/* |
| 596 |
* Listen interval for beacons or Dtims. |
| 597 |
* |
| 598 |
* Range: 0 for beacon and Dtim wakeup |
| 599 |
* 1-10 for x Dtims |
| 600 |
* 1-255 for x beacons |
| 601 |
*/ |
| 602 |
u8 listen_interval; |
| 603 |
|
| 604 |
/* |
| 605 |
* Firmware wakeup conditions during suspend |
| 606 |
* Range: CONF_WAKE_UP_EVENT_* |
| 607 |
*/ |
| 608 |
u8 suspend_wake_up_event; |
| 609 |
|
| 610 |
/* |
| 611 |
* Listen interval during suspend. |
| 612 |
* Currently will be in DTIMs (1-10) |
| 613 |
* |
| 614 |
*/ |
| 615 |
u8 suspend_listen_interval; |
| 616 |
|
| 617 |
/* |
| 618 |
* Enable or disable the beacon filtering. |
| 619 |
* |
| 620 |
* Range: CONF_BCN_FILT_MODE_* |
| 621 |
*/ |
| 622 |
u8 bcn_filt_mode; |
| 623 |
|
| 624 |
/* |
| 625 |
* Configure Beacon filter pass-thru rules. |
| 626 |
*/ |
| 627 |
u8 bcn_filt_ie_count; |
| 628 |
struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; |
| 629 |
|
| 630 |
/* |
| 631 |
* The number of consecutive beacons to lose, before the firmware |
| 632 |
* becomes out of synch. |
| 633 |
* |
| 634 |
* Range: u32 |
| 635 |
*/ |
| 636 |
u32 synch_fail_thold; |
| 637 |
|
| 638 |
/* |
| 639 |
* After out-of-synch, the number of TU's to wait without a further |
| 640 |
* received beacon (or probe response) before issuing the BSS_EVENT_LOSE |
| 641 |
* event. |
| 642 |
* |
| 643 |
* Range: u32 |
| 644 |
*/ |
| 645 |
u32 bss_lose_timeout; |
| 646 |
|
| 647 |
/* |
| 648 |
* Beacon receive timeout. |
| 649 |
* |
| 650 |
* Range: u32 |
| 651 |
*/ |
| 652 |
u32 beacon_rx_timeout; |
| 653 |
|
| 654 |
/* |
| 655 |
* Broadcast receive timeout. |
| 656 |
* |
| 657 |
* Range: u32 |
| 658 |
*/ |
| 659 |
u32 broadcast_timeout; |
| 660 |
|
| 661 |
/* |
| 662 |
* Enable/disable reception of broadcast packets in power save mode |
| 663 |
* |
| 664 |
* Range: 1 - enable, 0 - disable |
| 665 |
*/ |
| 666 |
u8 rx_broadcast_in_ps; |
| 667 |
|
| 668 |
/* |
| 669 |
* Consecutive PS Poll failures before sending event to driver |
| 670 |
* |
| 671 |
* Range: u8 |
| 672 |
*/ |
| 673 |
u8 ps_poll_threshold; |
| 674 |
|
| 675 |
/* |
| 676 |
* Configuration of signal average weights. |
| 677 |
*/ |
| 678 |
struct conf_sig_weights sig_weights; |
| 679 |
|
| 680 |
/* |
| 681 |
* Specifies if beacon early termination procedure is enabled or |
| 682 |
* disabled. |
| 683 |
* |
| 684 |
* Range: CONF_BET_MODE_* |
| 685 |
*/ |
| 686 |
u8 bet_enable; |
| 687 |
|
| 688 |
/* |
| 689 |
* Specifies the maximum number of consecutive beacons that may be |
| 690 |
* early terminated. After this number is reached at least one full |
| 691 |
* beacon must be correctly received in FW before beacon ET |
| 692 |
* resumes. |
| 693 |
* |
| 694 |
* Range 0 - 255 |
| 695 |
*/ |
| 696 |
u8 bet_max_consecutive; |
| 697 |
|
| 698 |
/* |
| 699 |
* Specifies the maximum number of times to try PSM entry if it fails |
| 700 |
* (if sending the appropriate null-func message fails.) |
| 701 |
* |
| 702 |
* Range 0 - 255 |
| 703 |
*/ |
| 704 |
u8 psm_entry_retries; |
| 705 |
|
| 706 |
/* |
| 707 |
* Specifies the maximum number of times to try PSM exit if it fails |
| 708 |
* (if sending the appropriate null-func message fails.) |
| 709 |
* |
| 710 |
* Range 0 - 255 |
| 711 |
*/ |
| 712 |
u8 psm_exit_retries; |
| 713 |
|
| 714 |
/* |
| 715 |
* Specifies the maximum number of times to try transmit the PSM entry |
| 716 |
* null-func frame for each PSM entry attempt |
| 717 |
* |
| 718 |
* Range 0 - 255 |
| 719 |
*/ |
| 720 |
u8 psm_entry_nullfunc_retries; |
| 721 |
|
| 722 |
/* |
| 723 |
* Specifies the dynamic PS timeout in ms that will be used |
| 724 |
* by the FW when in AUTO_PS mode |
| 725 |
*/ |
| 726 |
u16 dynamic_ps_timeout; |
| 727 |
|
| 728 |
/* |
| 729 |
* Specifies whether dynamic PS should be disabled and PSM forced. |
| 730 |
* This is required for certain WiFi certification tests. |
| 731 |
*/ |
| 732 |
u8 forced_ps; |
| 733 |
|
| 734 |
/* |
| 735 |
* |
| 736 |
* Specifies the interval of the connection keep-alive null-func |
| 737 |
* frame in ms. |
| 738 |
* |
| 739 |
* Range: 1000 - 3600000 |
| 740 |
*/ |
| 741 |
u32 keep_alive_interval; |
| 742 |
|
| 743 |
/* |
| 744 |
* Maximum listen interval supported by the driver in units of beacons. |
| 745 |
* |
| 746 |
* Range: u16 |
| 747 |
*/ |
| 748 |
u8 max_listen_interval; |
| 749 |
|
| 750 |
/* |
| 751 |
* Default sleep authorization for a new STA interface. This determines |
| 752 |
* whether we can go to ELP. |
| 753 |
*/ |
| 754 |
u8 sta_sleep_auth; |
| 755 |
|
| 756 |
/* |
| 757 |
* Default RX BA Activity filter configuration |
| 758 |
*/ |
| 759 |
u8 suspend_rx_ba_activity; |
| 760 |
} __packed; |
| 761 |
|
| 762 |
enum { |
| 763 |
CONF_REF_CLK_19_2_E, |
| 764 |
CONF_REF_CLK_26_E, |
| 765 |
CONF_REF_CLK_38_4_E, |
| 766 |
CONF_REF_CLK_52_E, |
| 767 |
CONF_REF_CLK_38_4_M_XTAL, |
| 768 |
CONF_REF_CLK_26_M_XTAL, |
| 769 |
}; |
| 770 |
|
| 771 |
enum single_dual_band_enum { |
| 772 |
CONF_SINGLE_BAND, |
| 773 |
CONF_DUAL_BAND |
| 774 |
}; |
| 775 |
|
| 776 |
#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 |
| 777 |
#define CONF_NUMBER_OF_SUB_BANDS_5 7 |
| 778 |
#define CONF_NUMBER_OF_RATE_GROUPS 6 |
| 779 |
#define CONF_NUMBER_OF_CHANNELS_2_4 14 |
| 780 |
#define CONF_NUMBER_OF_CHANNELS_5 35 |
| 781 |
|
| 782 |
struct conf_itrim_settings { |
| 783 |
/* enable dco itrim */ |
| 784 |
u8 enable; |
| 785 |
|
| 786 |
/* moderation timeout in microsecs from the last TX */ |
| 787 |
u32 timeout; |
| 788 |
} __packed; |
| 789 |
|
| 790 |
enum conf_fast_wakeup { |
| 791 |
CONF_FAST_WAKEUP_ENABLE, |
| 792 |
CONF_FAST_WAKEUP_DISABLE, |
| 793 |
}; |
| 794 |
|
| 795 |
struct conf_pm_config_settings { |
| 796 |
/* |
| 797 |
* Host clock settling time |
| 798 |
* |
| 799 |
* Range: 0 - 30000 us |
| 800 |
*/ |
| 801 |
u32 host_clk_settling_time; |
| 802 |
|
| 803 |
/* |
| 804 |
* Host fast wakeup support |
| 805 |
* |
| 806 |
* Range: enum conf_fast_wakeup |
| 807 |
*/ |
| 808 |
u8 host_fast_wakeup_support; |
| 809 |
} __packed; |
| 810 |
|
| 811 |
struct conf_roam_trigger_settings { |
| 812 |
/* |
| 813 |
* The minimum interval between two trigger events. |
| 814 |
* |
| 815 |
* Range: 0 - 60000 ms |
| 816 |
*/ |
| 817 |
u16 trigger_pacing; |
| 818 |
|
| 819 |
/* |
| 820 |
* The weight for rssi/beacon average calculation |
| 821 |
* |
| 822 |
* Range: 0 - 255 |
| 823 |
*/ |
| 824 |
u8 avg_weight_rssi_beacon; |
| 825 |
|
| 826 |
/* |
| 827 |
* The weight for rssi/data frame average calculation |
| 828 |
* |
| 829 |
* Range: 0 - 255 |
| 830 |
*/ |
| 831 |
u8 avg_weight_rssi_data; |
| 832 |
|
| 833 |
/* |
| 834 |
* The weight for snr/beacon average calculation |
| 835 |
* |
| 836 |
* Range: 0 - 255 |
| 837 |
*/ |
| 838 |
u8 avg_weight_snr_beacon; |
| 839 |
|
| 840 |
/* |
| 841 |
* The weight for snr/data frame average calculation |
| 842 |
* |
| 843 |
* Range: 0 - 255 |
| 844 |
*/ |
| 845 |
u8 avg_weight_snr_data; |
| 846 |
} __packed; |
| 847 |
|
| 848 |
struct conf_scan_settings { |
| 849 |
/* |
| 850 |
* The minimum time to wait on each channel for active scans |
| 851 |
* This value will be used whenever there's a connected interface. |
| 852 |
* |
| 853 |
* Range: u32 tu/1000 |
| 854 |
*/ |
| 855 |
u32 min_dwell_time_active; |
| 856 |
|
| 857 |
/* |
| 858 |
* The maximum time to wait on each channel for active scans |
| 859 |
* This value will be currently used whenever there's a |
| 860 |
* connected interface. It shouldn't exceed 30000 (~30ms) to avoid |
| 861 |
* possible interference of voip traffic going on while scanning. |
| 862 |
* |
| 863 |
* Range: u32 tu/1000 |
| 864 |
*/ |
| 865 |
u32 max_dwell_time_active; |
| 866 |
|
| 867 |
/* The minimum time to wait on each channel for active scans |
| 868 |
* when it's possible to have longer scan dwell times. |
| 869 |
* Currently this is used whenever we're idle on all interfaces. |
| 870 |
* Longer dwell times improve detection of networks within a |
| 871 |
* single scan. |
| 872 |
* |
| 873 |
* Range: u32 tu/1000 |
| 874 |
*/ |
| 875 |
u32 min_dwell_time_active_long; |
| 876 |
|
| 877 |
/* The maximum time to wait on each channel for active scans |
| 878 |
* when it's possible to have longer scan dwell times. |
| 879 |
* See min_dwell_time_active_long |
| 880 |
* |
| 881 |
* Range: u32 tu/1000 |
| 882 |
*/ |
| 883 |
u32 max_dwell_time_active_long; |
| 884 |
|
| 885 |
/* time to wait on the channel for passive scans (in TU/1000) */ |
| 886 |
u32 dwell_time_passive; |
| 887 |
|
| 888 |
/* time to wait on the channel for DFS scans (in TU/1000) */ |
| 889 |
u32 dwell_time_dfs; |
| 890 |
|
| 891 |
/* |
| 892 |
* Number of probe requests to transmit on each active scan channel |
| 893 |
* |
| 894 |
* Range: u8 |
| 895 |
*/ |
| 896 |
u16 num_probe_reqs; |
| 897 |
|
| 898 |
/* |
| 899 |
* Scan trigger (split scan) timeout. The FW will split the scan |
| 900 |
* operation into slices of the given time and allow the FW to schedule |
| 901 |
* other tasks in between. |
| 902 |
* |
| 903 |
* Range: u32 Microsecs |
| 904 |
*/ |
| 905 |
u32 split_scan_timeout; |
| 906 |
} __packed; |
| 907 |
|
| 908 |
struct conf_sched_scan_settings { |
| 909 |
/* |
| 910 |
* The base time to wait on the channel for active scans (in TU/1000). |
| 911 |
* The minimum dwell time is calculated according to this: |
| 912 |
* min_dwell_time = base + num_of_probes_to_be_sent * delta_per_probe |
| 913 |
* The maximum dwell time is calculated according to this: |
| 914 |
* max_dwell_time = min_dwell_time + max_dwell_time_delta |
| 915 |
*/ |
| 916 |
u32 base_dwell_time; |
| 917 |
|
| 918 |
/* The delta between the min dwell time and max dwell time for |
| 919 |
* active scans (in TU/1000s). The max dwell time is used by the FW once |
| 920 |
* traffic is detected on the channel. |
| 921 |
*/ |
| 922 |
u32 max_dwell_time_delta; |
| 923 |
|
| 924 |
/* Delta added to min dwell time per each probe in 2.4 GHz (TU/1000) */ |
| 925 |
u32 dwell_time_delta_per_probe; |
| 926 |
|
| 927 |
/* Delta added to min dwell time per each probe in 5 GHz (TU/1000) */ |
| 928 |
u32 dwell_time_delta_per_probe_5; |
| 929 |
|
| 930 |
/* time to wait on the channel for passive scans (in TU/1000) */ |
| 931 |
u32 dwell_time_passive; |
| 932 |
|
| 933 |
/* time to wait on the channel for DFS scans (in TU/1000) */ |
| 934 |
u32 dwell_time_dfs; |
| 935 |
|
| 936 |
/* number of probe requests to send on each channel in active scans */ |
| 937 |
u8 num_probe_reqs; |
| 938 |
|
| 939 |
/* RSSI threshold to be used for filtering */ |
| 940 |
s8 rssi_threshold; |
| 941 |
|
| 942 |
/* SNR threshold to be used for filtering */ |
| 943 |
s8 snr_threshold; |
| 944 |
|
| 945 |
/* |
| 946 |
* number of short intervals scheduled scan cycles before |
| 947 |
* switching to long intervals |
| 948 |
*/ |
| 949 |
u8 num_short_intervals; |
| 950 |
|
| 951 |
/* interval between each long scheduled scan cycle (in ms) */ |
| 952 |
u16 long_interval; |
| 953 |
} __packed; |
| 954 |
|
| 955 |
struct conf_ht_setting { |
| 956 |
u8 rx_ba_win_size; |
| 957 |
u8 tx_ba_win_size; |
| 958 |
u16 inactivity_timeout; |
| 959 |
|
| 960 |
/* bitmap of enabled TIDs for TX BA sessions */ |
| 961 |
u8 tx_ba_tid_bitmap; |
| 962 |
} __packed; |
| 963 |
|
| 964 |
struct conf_memory_settings { |
| 965 |
/* Number of stations supported in IBSS mode */ |
| 966 |
u8 num_stations; |
| 967 |
|
| 968 |
/* Number of ssid profiles used in IBSS mode */ |
| 969 |
u8 ssid_profiles; |
| 970 |
|
| 971 |
/* Number of memory buffers allocated to rx pool */ |
| 972 |
u8 rx_block_num; |
| 973 |
|
| 974 |
/* Minimum number of blocks allocated to tx pool */ |
| 975 |
u8 tx_min_block_num; |
| 976 |
|
| 977 |
/* Disable/Enable dynamic memory */ |
| 978 |
u8 dynamic_memory; |
| 979 |
|
| 980 |
/* |
| 981 |
* Minimum required free tx memory blocks in order to assure optimum |
| 982 |
* performance |
| 983 |
* |
| 984 |
* Range: 0-120 |
| 985 |
*/ |
| 986 |
u8 min_req_tx_blocks; |
| 987 |
|
| 988 |
/* |
| 989 |
* Minimum required free rx memory blocks in order to assure optimum |
| 990 |
* performance |
| 991 |
* |
| 992 |
* Range: 0-120 |
| 993 |
*/ |
| 994 |
u8 min_req_rx_blocks; |
| 995 |
|
| 996 |
/* |
| 997 |
* Minimum number of mem blocks (free+used) guaranteed for TX |
| 998 |
* |
| 999 |
* Range: 0-120 |
| 1000 |
*/ |
| 1001 |
u8 tx_min; |
| 1002 |
} __packed; |
| 1003 |
|
| 1004 |
struct conf_fm_coex { |
| 1005 |
u8 enable; |
| 1006 |
u8 swallow_period; |
| 1007 |
u8 n_divider_fref_set_1; |
| 1008 |
u8 n_divider_fref_set_2; |
| 1009 |
u16 m_divider_fref_set_1; |
| 1010 |
u16 m_divider_fref_set_2; |
| 1011 |
u32 coex_pll_stabilization_time; |
| 1012 |
u16 ldo_stabilization_time; |
| 1013 |
u8 fm_disturbed_band_margin; |
| 1014 |
u8 swallow_clk_diff; |
| 1015 |
} __packed; |
| 1016 |
|
| 1017 |
struct conf_rx_streaming_settings { |
| 1018 |
/* |
| 1019 |
* RX Streaming duration (in msec) from last tx/rx |
| 1020 |
* |
| 1021 |
* Range: u32 |
| 1022 |
*/ |
| 1023 |
u32 duration; |
| 1024 |
|
| 1025 |
/* |
| 1026 |
* Bitmap of tids to be polled during RX streaming. |
| 1027 |
* (Note: it doesn't look like it really matters) |
| 1028 |
* |
| 1029 |
* Range: 0x1-0xff |
| 1030 |
*/ |
| 1031 |
u8 queues; |
| 1032 |
|
| 1033 |
/* |
| 1034 |
* RX Streaming interval. |
| 1035 |
* (Note:this value is also used as the rx streaming timeout) |
| 1036 |
* Range: 0 (disabled), 10 - 100 |
| 1037 |
*/ |
| 1038 |
u8 interval; |
| 1039 |
|
| 1040 |
/* |
| 1041 |
* enable rx streaming also when there is no coex activity |
| 1042 |
*/ |
| 1043 |
u8 always; |
| 1044 |
} __packed; |
| 1045 |
|
| 1046 |
#define CONF_FWLOG_MIN_MEM_BLOCKS 2 |
| 1047 |
#define CONF_FWLOG_MAX_MEM_BLOCKS 16 |
| 1048 |
|
| 1049 |
struct conf_fwlog { |
| 1050 |
/* Continuous or on-demand */ |
| 1051 |
u8 mode; |
| 1052 |
|
| 1053 |
/* |
| 1054 |
* Number of memory blocks dedicated for the FW logger |
| 1055 |
* |
| 1056 |
* Range: 2-16, or 0 to disable the FW logger |
| 1057 |
*/ |
| 1058 |
u8 mem_blocks; |
| 1059 |
|
| 1060 |
/* Minimum log level threshold */ |
| 1061 |
u8 severity; |
| 1062 |
|
| 1063 |
/* Include/exclude timestamps from the log messages */ |
| 1064 |
u8 timestamp; |
| 1065 |
|
| 1066 |
/* See enum wl1271_fwlogger_output */ |
| 1067 |
u8 output; |
| 1068 |
|
| 1069 |
/* Regulates the frequency of log messages */ |
| 1070 |
u8 threshold; |
| 1071 |
} __packed; |
| 1072 |
|
| 1073 |
#define ACX_RATE_MGMT_NUM_OF_RATES 13 |
| 1074 |
struct conf_rate_policy_settings { |
| 1075 |
u16 rate_retry_score; |
| 1076 |
u16 per_add; |
| 1077 |
u16 per_th1; |
| 1078 |
u16 per_th2; |
| 1079 |
u16 max_per; |
| 1080 |
u8 inverse_curiosity_factor; |
| 1081 |
u8 tx_fail_low_th; |
| 1082 |
u8 tx_fail_high_th; |
| 1083 |
u8 per_alpha_shift; |
| 1084 |
u8 per_add_shift; |
| 1085 |
u8 per_beta1_shift; |
| 1086 |
u8 per_beta2_shift; |
| 1087 |
u8 rate_check_up; |
| 1088 |
u8 rate_check_down; |
| 1089 |
u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES]; |
| 1090 |
} __packed; |
| 1091 |
|
| 1092 |
struct conf_hangover_settings { |
| 1093 |
u32 recover_time; |
| 1094 |
u8 hangover_period; |
| 1095 |
u8 dynamic_mode; |
| 1096 |
u8 early_termination_mode; |
| 1097 |
u8 max_period; |
| 1098 |
u8 min_period; |
| 1099 |
u8 increase_delta; |
| 1100 |
u8 decrease_delta; |
| 1101 |
u8 quiet_time; |
| 1102 |
u8 increase_time; |
| 1103 |
u8 window_size; |
| 1104 |
} __packed; |
| 1105 |
|
| 1106 |
struct conf_recovery_settings { |
| 1107 |
/* BUG() on fw recovery */ |
| 1108 |
u8 bug_on_recovery; |
| 1109 |
|
| 1110 |
/* Prevent HW recovery. FW will remain stuck. */ |
| 1111 |
u8 no_recovery; |
| 1112 |
} __packed; |
| 1113 |
|
| 1114 |
/* |
| 1115 |
* The conf version consists of 4 bytes. The two MSB are the wlcore |
| 1116 |
* version, the two LSB are the lower driver's private conf |
| 1117 |
* version. |
| 1118 |
*/ |
| 1119 |
#define WLCORE_CONF_VERSION (0x0007 << 16) |
| 1120 |
#define WLCORE_CONF_MASK 0xffff0000 |
| 1121 |
#define WLCORE_CONF_SIZE (sizeof(struct wlcore_conf_header) + \ |
| 1122 |
sizeof(struct wlcore_conf)) |
| 1123 |
|
| 1124 |
struct wlcore_conf_header { |
| 1125 |
__le32 magic; |
| 1126 |
__le32 version; |
| 1127 |
__le32 checksum; |
| 1128 |
} __packed; |
| 1129 |
|
| 1130 |
struct wlcore_conf { |
| 1131 |
struct conf_sg_settings sg; |
| 1132 |
struct conf_rx_settings rx; |
| 1133 |
struct conf_tx_settings tx; |
| 1134 |
struct conf_conn_settings conn; |
| 1135 |
struct conf_itrim_settings itrim; |
| 1136 |
struct conf_pm_config_settings pm_config; |
| 1137 |
struct conf_roam_trigger_settings roam_trigger; |
| 1138 |
struct conf_scan_settings scan; |
| 1139 |
struct conf_sched_scan_settings sched_scan; |
| 1140 |
struct conf_ht_setting ht; |
| 1141 |
struct conf_memory_settings mem; |
| 1142 |
struct conf_fm_coex fm_coex; |
| 1143 |
struct conf_rx_streaming_settings rx_streaming; |
| 1144 |
struct conf_fwlog fwlog; |
| 1145 |
struct conf_rate_policy_settings rate; |
| 1146 |
struct conf_hangover_settings hangover; |
| 1147 |
struct conf_recovery_settings recovery; |
| 1148 |
} __packed; |
| 1149 |
|
| 1150 |
struct wlcore_conf_file { |
| 1151 |
struct wlcore_conf_header header; |
| 1152 |
struct wlcore_conf core; |
| 1153 |
u8 priv[]; |
| 1154 |
} __packed; |
| 1155 |
|
| 1156 |
#endif |