| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* This file is part of wl1251 |
| 4 |
* |
| 5 |
* Copyright (C) 2008 Nokia Corporation |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <linux/err.h> |
| 9 |
#include <linux/interrupt.h> |
| 10 |
#include <linux/irq.h> |
| 11 |
#include <linux/module.h> |
| 12 |
#include <linux/slab.h> |
| 13 |
#include <linux/swab.h> |
| 14 |
#include <linux/crc7.h> |
| 15 |
#include <linux/spi/spi.h> |
| 16 |
#include <linux/gpio/consumer.h> |
| 17 |
#include <linux/of.h> |
| 18 |
#include <linux/regulator/consumer.h> |
| 19 |
|
| 20 |
#include "wl1251.h" |
| 21 |
#include "reg.h" |
| 22 |
#include "spi.h" |
| 23 |
|
| 24 |
struct wl1251_spi { |
| 25 |
struct spi_device *spi; |
| 26 |
struct gpio_desc *power_gpio; |
| 27 |
}; |
| 28 |
|
| 29 |
static irqreturn_t wl1251_irq(int irq, void *cookie) |
| 30 |
{ |
| 31 |
struct wl1251 *wl; |
| 32 |
|
| 33 |
wl1251_debug(DEBUG_IRQ, "IRQ"); |
| 34 |
|
| 35 |
wl = cookie; |
| 36 |
|
| 37 |
ieee80211_queue_work(wl->hw, &wl->irq_work); |
| 38 |
|
| 39 |
return IRQ_HANDLED; |
| 40 |
} |
| 41 |
|
| 42 |
static void wl1251_spi_reset(struct wl1251 *wl) |
| 43 |
{ |
| 44 |
struct wl1251_spi *wl_spi = wl->if_priv; |
| 45 |
u8 *cmd; |
| 46 |
struct spi_transfer t; |
| 47 |
struct spi_message m; |
| 48 |
|
| 49 |
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); |
| 50 |
if (!cmd) { |
| 51 |
wl1251_error("could not allocate cmd for spi reset"); |
| 52 |
return; |
| 53 |
} |
| 54 |
|
| 55 |
memset(&t, 0, sizeof(t)); |
| 56 |
spi_message_init(&m); |
| 57 |
|
| 58 |
memset(cmd, 0xff, WSPI_INIT_CMD_LEN); |
| 59 |
|
| 60 |
t.tx_buf = cmd; |
| 61 |
t.len = WSPI_INIT_CMD_LEN; |
| 62 |
spi_message_add_tail(&t, &m); |
| 63 |
|
| 64 |
spi_sync(wl_spi->spi, &m); |
| 65 |
|
| 66 |
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); |
| 67 |
|
| 68 |
kfree(cmd); |
| 69 |
} |
| 70 |
|
| 71 |
static void wl1251_spi_wake(struct wl1251 *wl) |
| 72 |
{ |
| 73 |
struct wl1251_spi *wl_spi = wl->if_priv; |
| 74 |
struct spi_transfer t; |
| 75 |
struct spi_message m; |
| 76 |
u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); |
| 77 |
|
| 78 |
if (!cmd) { |
| 79 |
wl1251_error("could not allocate cmd for spi init"); |
| 80 |
return; |
| 81 |
} |
| 82 |
|
| 83 |
memset(&t, 0, sizeof(t)); |
| 84 |
spi_message_init(&m); |
| 85 |
|
| 86 |
/* Set WSPI_INIT_COMMAND |
| 87 |
* the data is being send from the MSB to LSB |
| 88 |
*/ |
| 89 |
cmd[0] = 0xff; |
| 90 |
cmd[1] = 0xff; |
| 91 |
cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; |
| 92 |
cmd[3] = 0; |
| 93 |
cmd[4] = 0; |
| 94 |
cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3; |
| 95 |
cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; |
| 96 |
|
| 97 |
cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS |
| 98 |
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; |
| 99 |
|
| 100 |
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) |
| 101 |
cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; |
| 102 |
else |
| 103 |
cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; |
| 104 |
|
| 105 |
cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; |
| 106 |
/* |
| 107 |
* The above is the logical order; it must actually be stored |
| 108 |
* in the buffer byte-swapped. |
| 109 |
*/ |
| 110 |
__swab32s((u32 *)cmd); |
| 111 |
__swab32s((u32 *)cmd+1); |
| 112 |
|
| 113 |
t.tx_buf = cmd; |
| 114 |
t.len = WSPI_INIT_CMD_LEN; |
| 115 |
spi_message_add_tail(&t, &m); |
| 116 |
|
| 117 |
spi_sync(wl_spi->spi, &m); |
| 118 |
|
| 119 |
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); |
| 120 |
|
| 121 |
kfree(cmd); |
| 122 |
} |
| 123 |
|
| 124 |
static void wl1251_spi_reset_wake(struct wl1251 *wl) |
| 125 |
{ |
| 126 |
wl1251_spi_reset(wl); |
| 127 |
wl1251_spi_wake(wl); |
| 128 |
} |
| 129 |
|
| 130 |
static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf, |
| 131 |
size_t len) |
| 132 |
{ |
| 133 |
struct wl1251_spi *wl_spi = wl->if_priv; |
| 134 |
struct spi_transfer t[3]; |
| 135 |
struct spi_message m; |
| 136 |
u8 *busy_buf; |
| 137 |
u32 *cmd; |
| 138 |
|
| 139 |
cmd = &wl->buffer_cmd; |
| 140 |
busy_buf = wl->buffer_busyword; |
| 141 |
|
| 142 |
*cmd = 0; |
| 143 |
*cmd |= WSPI_CMD_READ; |
| 144 |
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; |
| 145 |
*cmd |= addr & WSPI_CMD_BYTE_ADDR; |
| 146 |
|
| 147 |
spi_message_init(&m); |
| 148 |
memset(t, 0, sizeof(t)); |
| 149 |
|
| 150 |
t[0].tx_buf = cmd; |
| 151 |
t[0].len = 4; |
| 152 |
spi_message_add_tail(&t[0], &m); |
| 153 |
|
| 154 |
/* Busy and non busy words read */ |
| 155 |
t[1].rx_buf = busy_buf; |
| 156 |
t[1].len = WL1251_BUSY_WORD_LEN; |
| 157 |
spi_message_add_tail(&t[1], &m); |
| 158 |
|
| 159 |
t[2].rx_buf = buf; |
| 160 |
t[2].len = len; |
| 161 |
spi_message_add_tail(&t[2], &m); |
| 162 |
|
| 163 |
spi_sync(wl_spi->spi, &m); |
| 164 |
|
| 165 |
/* FIXME: check busy words */ |
| 166 |
|
| 167 |
wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd)); |
| 168 |
wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len); |
| 169 |
} |
| 170 |
|
| 171 |
static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf, |
| 172 |
size_t len) |
| 173 |
{ |
| 174 |
struct wl1251_spi *wl_spi = wl->if_priv; |
| 175 |
struct spi_transfer t[2]; |
| 176 |
struct spi_message m; |
| 177 |
u32 *cmd; |
| 178 |
|
| 179 |
cmd = &wl->buffer_cmd; |
| 180 |
|
| 181 |
*cmd = 0; |
| 182 |
*cmd |= WSPI_CMD_WRITE; |
| 183 |
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; |
| 184 |
*cmd |= addr & WSPI_CMD_BYTE_ADDR; |
| 185 |
|
| 186 |
spi_message_init(&m); |
| 187 |
memset(t, 0, sizeof(t)); |
| 188 |
|
| 189 |
t[0].tx_buf = cmd; |
| 190 |
t[0].len = sizeof(*cmd); |
| 191 |
spi_message_add_tail(&t[0], &m); |
| 192 |
|
| 193 |
t[1].tx_buf = buf; |
| 194 |
t[1].len = len; |
| 195 |
spi_message_add_tail(&t[1], &m); |
| 196 |
|
| 197 |
spi_sync(wl_spi->spi, &m); |
| 198 |
|
| 199 |
wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd)); |
| 200 |
wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len); |
| 201 |
} |
| 202 |
|
| 203 |
static void wl1251_spi_enable_irq(struct wl1251 *wl) |
| 204 |
{ |
| 205 |
return enable_irq(wl->irq); |
| 206 |
} |
| 207 |
|
| 208 |
static void wl1251_spi_disable_irq(struct wl1251 *wl) |
| 209 |
{ |
| 210 |
return disable_irq(wl->irq); |
| 211 |
} |
| 212 |
|
| 213 |
static int wl1251_spi_set_power(struct wl1251 *wl, bool enable) |
| 214 |
{ |
| 215 |
struct wl1251_spi *wl_spi = wl->if_priv; |
| 216 |
|
| 217 |
if (wl_spi->power_gpio) |
| 218 |
gpiod_set_value_cansleep(wl_spi->power_gpio, enable); |
| 219 |
|
| 220 |
return 0; |
| 221 |
} |
| 222 |
|
| 223 |
static const struct wl1251_if_operations wl1251_spi_ops = { |
| 224 |
.read = wl1251_spi_read, |
| 225 |
.write = wl1251_spi_write, |
| 226 |
.reset = wl1251_spi_reset_wake, |
| 227 |
.enable_irq = wl1251_spi_enable_irq, |
| 228 |
.disable_irq = wl1251_spi_disable_irq, |
| 229 |
.power = wl1251_spi_set_power, |
| 230 |
}; |
| 231 |
|
| 232 |
static int wl1251_spi_probe(struct spi_device *spi) |
| 233 |
{ |
| 234 |
struct device_node *np = spi->dev.of_node; |
| 235 |
struct ieee80211_hw *hw; |
| 236 |
struct wl1251_spi *wl_spi; |
| 237 |
struct wl1251 *wl; |
| 238 |
int ret; |
| 239 |
|
| 240 |
if (!np) |
| 241 |
return -ENODEV; |
| 242 |
|
| 243 |
wl_spi = devm_kzalloc(&spi->dev, sizeof(*wl_spi), GFP_KERNEL); |
| 244 |
if (!wl_spi) |
| 245 |
return -ENOMEM; |
| 246 |
|
| 247 |
wl_spi->spi = spi; |
| 248 |
|
| 249 |
hw = wl1251_alloc_hw(); |
| 250 |
if (IS_ERR(hw)) |
| 251 |
return PTR_ERR(hw); |
| 252 |
|
| 253 |
wl = hw->priv; |
| 254 |
|
| 255 |
SET_IEEE80211_DEV(hw, &spi->dev); |
| 256 |
spi_set_drvdata(spi, wl); |
| 257 |
wl->if_priv = wl_spi; |
| 258 |
wl->if_ops = &wl1251_spi_ops; |
| 259 |
|
| 260 |
/* This is the only SPI value that we need to set here, the rest |
| 261 |
* comes from the board-peripherals file |
| 262 |
*/ |
| 263 |
spi->bits_per_word = 32; |
| 264 |
|
| 265 |
ret = spi_setup(spi); |
| 266 |
if (ret < 0) { |
| 267 |
wl1251_error("spi_setup failed"); |
| 268 |
goto out_free; |
| 269 |
} |
| 270 |
|
| 271 |
wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom"); |
| 272 |
|
| 273 |
wl_spi->power_gpio = devm_gpiod_get_optional(&spi->dev, "ti,power", |
| 274 |
GPIOD_OUT_LOW); |
| 275 |
ret = PTR_ERR_OR_ZERO(wl_spi->power_gpio); |
| 276 |
if (ret) { |
| 277 |
if (ret != -EPROBE_DEFER) |
| 278 |
wl1251_error("Failed to request gpio: %d\n", ret); |
| 279 |
goto out_free; |
| 280 |
} |
| 281 |
|
| 282 |
gpiod_set_consumer_name(wl_spi->power_gpio, "wl1251 power"); |
| 283 |
|
| 284 |
wl->irq = spi->irq; |
| 285 |
if (wl->irq < 0) { |
| 286 |
wl1251_error("irq missing in platform data"); |
| 287 |
ret = -ENODEV; |
| 288 |
goto out_free; |
| 289 |
} |
| 290 |
|
| 291 |
irq_set_status_flags(wl->irq, IRQ_NOAUTOEN); |
| 292 |
ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0, |
| 293 |
DRIVER_NAME, wl); |
| 294 |
if (ret < 0) { |
| 295 |
wl1251_error("request_irq() failed: %d", ret); |
| 296 |
goto out_free; |
| 297 |
} |
| 298 |
|
| 299 |
irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); |
| 300 |
|
| 301 |
wl->vio = devm_regulator_get(&spi->dev, "vio"); |
| 302 |
if (IS_ERR(wl->vio)) { |
| 303 |
ret = PTR_ERR(wl->vio); |
| 304 |
wl1251_error("vio regulator missing: %d", ret); |
| 305 |
goto out_free; |
| 306 |
} |
| 307 |
|
| 308 |
ret = regulator_enable(wl->vio); |
| 309 |
if (ret) |
| 310 |
goto out_free; |
| 311 |
|
| 312 |
ret = wl1251_init_ieee80211(wl); |
| 313 |
if (ret) |
| 314 |
goto disable_regulator; |
| 315 |
|
| 316 |
return 0; |
| 317 |
|
| 318 |
disable_regulator: |
| 319 |
regulator_disable(wl->vio); |
| 320 |
out_free: |
| 321 |
ieee80211_free_hw(hw); |
| 322 |
|
| 323 |
return ret; |
| 324 |
} |
| 325 |
|
| 326 |
static void wl1251_spi_remove(struct spi_device *spi) |
| 327 |
{ |
| 328 |
struct wl1251 *wl = spi_get_drvdata(spi); |
| 329 |
|
| 330 |
wl1251_free_hw(wl); |
| 331 |
regulator_disable(wl->vio); |
| 332 |
} |
| 333 |
|
| 334 |
static struct spi_driver wl1251_spi_driver = { |
| 335 |
.driver = { |
| 336 |
.name = DRIVER_NAME, |
| 337 |
}, |
| 338 |
|
| 339 |
.probe = wl1251_spi_probe, |
| 340 |
.remove = wl1251_spi_remove, |
| 341 |
}; |
| 342 |
|
| 343 |
module_spi_driver(wl1251_spi_driver); |
| 344 |
|
| 345 |
MODULE_DESCRIPTION("TI WL1251 SPI helpers"); |
| 346 |
MODULE_LICENSE("GPL"); |
| 347 |
MODULE_AUTHOR("Kalle Valo <[email protected]>"); |
| 348 |
MODULE_ALIAS("spi:wl1251"); |