| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* This file is part of wl12xx |
| 4 |
* |
| 5 |
* Copyright (C) 2008 Nokia Corporation |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "wl1251.h" |
| 9 |
#include "reg.h" |
| 10 |
#include "io.h" |
| 11 |
|
| 12 |
/* FIXME: this is static data nowadays and the table can be removed */ |
| 13 |
static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = { |
| 14 |
[ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474), |
| 15 |
[ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478), |
| 16 |
[ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494), |
| 17 |
[ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498), |
| 18 |
[ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C), |
| 19 |
[ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0), |
| 20 |
[ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4), |
| 21 |
[ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8), |
| 22 |
[ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000), |
| 23 |
[ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C), |
| 24 |
[ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804) |
| 25 |
}; |
| 26 |
|
| 27 |
static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr) |
| 28 |
{ |
| 29 |
/* If the address is lower than REGISTERS_BASE, it means that this is |
| 30 |
* a chip-specific register address, so look it up in the registers |
| 31 |
* table */ |
| 32 |
if (addr < REGISTERS_BASE) { |
| 33 |
/* Make sure we don't go over the table */ |
| 34 |
if (addr >= ACX_REG_TABLE_LEN) { |
| 35 |
wl1251_error("address out of range (%d)", addr); |
| 36 |
return -EINVAL; |
| 37 |
} |
| 38 |
addr = wl1251_io_reg_table[addr]; |
| 39 |
} |
| 40 |
|
| 41 |
return addr - wl->physical_reg_addr + wl->virtual_reg_addr; |
| 42 |
} |
| 43 |
|
| 44 |
static int wl1251_translate_mem_addr(struct wl1251 *wl, int addr) |
| 45 |
{ |
| 46 |
return addr - wl->physical_mem_addr + wl->virtual_mem_addr; |
| 47 |
} |
| 48 |
|
| 49 |
void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len) |
| 50 |
{ |
| 51 |
int physical; |
| 52 |
|
| 53 |
physical = wl1251_translate_mem_addr(wl, addr); |
| 54 |
|
| 55 |
wl->if_ops->read(wl, physical, buf, len); |
| 56 |
} |
| 57 |
|
| 58 |
void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len) |
| 59 |
{ |
| 60 |
int physical; |
| 61 |
|
| 62 |
physical = wl1251_translate_mem_addr(wl, addr); |
| 63 |
|
| 64 |
wl->if_ops->write(wl, physical, buf, len); |
| 65 |
} |
| 66 |
|
| 67 |
u32 wl1251_mem_read32(struct wl1251 *wl, int addr) |
| 68 |
{ |
| 69 |
return wl1251_read32(wl, wl1251_translate_mem_addr(wl, addr)); |
| 70 |
} |
| 71 |
|
| 72 |
void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val) |
| 73 |
{ |
| 74 |
wl1251_write32(wl, wl1251_translate_mem_addr(wl, addr), val); |
| 75 |
} |
| 76 |
|
| 77 |
u32 wl1251_reg_read32(struct wl1251 *wl, int addr) |
| 78 |
{ |
| 79 |
return wl1251_read32(wl, wl1251_translate_reg_addr(wl, addr)); |
| 80 |
} |
| 81 |
|
| 82 |
void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val) |
| 83 |
{ |
| 84 |
wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val); |
| 85 |
} |
| 86 |
|
| 87 |
/* Set the partitions to access the chip addresses. |
| 88 |
* |
| 89 |
* There are two VIRTUAL partitions (the memory partition and the |
| 90 |
* registers partition), which are mapped to two different areas of the |
| 91 |
* PHYSICAL (hardware) memory. This function also makes other checks to |
| 92 |
* ensure that the partitions are not overlapping. In the diagram below, the |
| 93 |
* memory partition comes before the register partition, but the opposite is |
| 94 |
* also supported. |
| 95 |
* |
| 96 |
* PHYSICAL address |
| 97 |
* space |
| 98 |
* |
| 99 |
* | | |
| 100 |
* ...+----+--> mem_start |
| 101 |
* VIRTUAL address ... | | |
| 102 |
* space ... | | [PART_0] |
| 103 |
* ... | | |
| 104 |
* 0x00000000 <--+----+... ...+----+--> mem_start + mem_size |
| 105 |
* | | ... | | |
| 106 |
* |MEM | ... | | |
| 107 |
* | | ... | | |
| 108 |
* part_size <--+----+... | | {unused area) |
| 109 |
* | | ... | | |
| 110 |
* |REG | ... | | |
| 111 |
* part_size | | ... | | |
| 112 |
* + <--+----+... ...+----+--> reg_start |
| 113 |
* reg_size ... | | |
| 114 |
* ... | | [PART_1] |
| 115 |
* ... | | |
| 116 |
* ...+----+--> reg_start + reg_size |
| 117 |
* | | |
| 118 |
* |
| 119 |
*/ |
| 120 |
void wl1251_set_partition(struct wl1251 *wl, |
| 121 |
u32 mem_start, u32 mem_size, |
| 122 |
u32 reg_start, u32 reg_size) |
| 123 |
{ |
| 124 |
struct wl1251_partition_set *partition; |
| 125 |
|
| 126 |
partition = kmalloc_obj(*partition); |
| 127 |
if (!partition) { |
| 128 |
wl1251_error("can not allocate partition buffer"); |
| 129 |
return; |
| 130 |
} |
| 131 |
|
| 132 |
wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", |
| 133 |
mem_start, mem_size); |
| 134 |
wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", |
| 135 |
reg_start, reg_size); |
| 136 |
|
| 137 |
/* Make sure that the two partitions together don't exceed the |
| 138 |
* address range */ |
| 139 |
if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) { |
| 140 |
wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual" |
| 141 |
" address range. Truncating partition[0]."); |
| 142 |
mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size; |
| 143 |
wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", |
| 144 |
mem_start, mem_size); |
| 145 |
wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", |
| 146 |
reg_start, reg_size); |
| 147 |
} |
| 148 |
|
| 149 |
if ((mem_start < reg_start) && |
| 150 |
((mem_start + mem_size) > reg_start)) { |
| 151 |
/* Guarantee that the memory partition doesn't overlap the |
| 152 |
* registers partition */ |
| 153 |
wl1251_debug(DEBUG_SPI, "End of partition[0] is " |
| 154 |
"overlapping partition[1]. Adjusted."); |
| 155 |
mem_size = reg_start - mem_start; |
| 156 |
wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", |
| 157 |
mem_start, mem_size); |
| 158 |
wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", |
| 159 |
reg_start, reg_size); |
| 160 |
} else if ((reg_start < mem_start) && |
| 161 |
((reg_start + reg_size) > mem_start)) { |
| 162 |
/* Guarantee that the register partition doesn't overlap the |
| 163 |
* memory partition */ |
| 164 |
wl1251_debug(DEBUG_SPI, "End of partition[1] is" |
| 165 |
" overlapping partition[0]. Adjusted."); |
| 166 |
reg_size = mem_start - reg_start; |
| 167 |
wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", |
| 168 |
mem_start, mem_size); |
| 169 |
wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", |
| 170 |
reg_start, reg_size); |
| 171 |
} |
| 172 |
|
| 173 |
partition->mem.start = mem_start; |
| 174 |
partition->mem.size = mem_size; |
| 175 |
partition->reg.start = reg_start; |
| 176 |
partition->reg.size = reg_size; |
| 177 |
|
| 178 |
wl->physical_mem_addr = mem_start; |
| 179 |
wl->physical_reg_addr = reg_start; |
| 180 |
|
| 181 |
wl->virtual_mem_addr = 0; |
| 182 |
wl->virtual_reg_addr = mem_size; |
| 183 |
|
| 184 |
wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition, |
| 185 |
sizeof(*partition)); |
| 186 |
|
| 187 |
kfree(partition); |
| 188 |
} |