| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* Copyright(c) 2009-2012 Realtek Corporation.*/ |
| 3 |
|
| 4 |
#include "../wifi.h" |
| 5 |
#include "../efuse.h" |
| 6 |
#include "../base.h" |
| 7 |
#include "../regd.h" |
| 8 |
#include "../cam.h" |
| 9 |
#include "../ps.h" |
| 10 |
#include "../pci.h" |
| 11 |
#include "../rtl8192d/reg.h" |
| 12 |
#include "../rtl8192d/def.h" |
| 13 |
#include "../rtl8192d/dm_common.h" |
| 14 |
#include "../rtl8192d/fw_common.h" |
| 15 |
#include "../rtl8192d/hw_common.h" |
| 16 |
#include "../rtl8192d/phy_common.h" |
| 17 |
#include "phy.h" |
| 18 |
#include "dm.h" |
| 19 |
#include "fw.h" |
| 20 |
#include "led.h" |
| 21 |
#include "sw.h" |
| 22 |
#include "hw.h" |
| 23 |
|
| 24 |
u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct) |
| 25 |
{ |
| 26 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 27 |
u32 value; |
| 28 |
|
| 29 |
rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC)); |
| 30 |
rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct); |
| 31 |
udelay(10); |
| 32 |
value = rtl_read_dword(rtlpriv, REG_DBI_RDATA); |
| 33 |
return value; |
| 34 |
} |
| 35 |
|
| 36 |
void rtl92de_write_dword_dbi(struct ieee80211_hw *hw, |
| 37 |
u16 offset, u32 value, u8 direct) |
| 38 |
{ |
| 39 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 40 |
|
| 41 |
rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000)); |
| 42 |
rtl_write_dword(rtlpriv, REG_DBI_WDATA, value); |
| 43 |
rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct); |
| 44 |
} |
| 45 |
|
| 46 |
static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw, |
| 47 |
u8 set_bits, u8 clear_bits) |
| 48 |
{ |
| 49 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 50 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 51 |
|
| 52 |
rtlpci->reg_bcn_ctrl_val |= set_bits; |
| 53 |
rtlpci->reg_bcn_ctrl_val &= ~clear_bits; |
| 54 |
rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val); |
| 55 |
} |
| 56 |
|
| 57 |
static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw) |
| 58 |
{ |
| 59 |
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1)); |
| 60 |
} |
| 61 |
|
| 62 |
static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw) |
| 63 |
{ |
| 64 |
_rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0); |
| 65 |
} |
| 66 |
|
| 67 |
void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) |
| 68 |
{ |
| 69 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 70 |
|
| 71 |
switch (variable) { |
| 72 |
case HW_VAR_RCR: |
| 73 |
*((u32 *) (val)) = rtlpci->receive_config; |
| 74 |
break; |
| 75 |
default: |
| 76 |
rtl92d_get_hw_reg(hw, variable, val); |
| 77 |
break; |
| 78 |
} |
| 79 |
} |
| 80 |
|
| 81 |
void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) |
| 82 |
{ |
| 83 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 84 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 85 |
struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| 86 |
|
| 87 |
switch (variable) { |
| 88 |
case HW_VAR_AC_PARAM: { |
| 89 |
u8 e_aci = *val; |
| 90 |
rtl92d_dm_init_edca_turbo(hw); |
| 91 |
if (rtlpci->acm_method != EACMWAY2_SW) |
| 92 |
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, |
| 93 |
&e_aci); |
| 94 |
break; |
| 95 |
} |
| 96 |
case HW_VAR_ACM_CTRL: { |
| 97 |
u8 e_aci = *val; |
| 98 |
union aci_aifsn *p_aci_aifsn = |
| 99 |
(union aci_aifsn *)(&(mac->ac[0].aifs)); |
| 100 |
u8 acm = p_aci_aifsn->f.acm; |
| 101 |
u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL); |
| 102 |
|
| 103 |
acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1); |
| 104 |
if (acm) { |
| 105 |
switch (e_aci) { |
| 106 |
case AC0_BE: |
| 107 |
acm_ctrl |= ACMHW_BEQEN; |
| 108 |
break; |
| 109 |
case AC2_VI: |
| 110 |
acm_ctrl |= ACMHW_VIQEN; |
| 111 |
break; |
| 112 |
case AC3_VO: |
| 113 |
acm_ctrl |= ACMHW_VOQEN; |
| 114 |
break; |
| 115 |
default: |
| 116 |
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, |
| 117 |
"HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", |
| 118 |
acm); |
| 119 |
break; |
| 120 |
} |
| 121 |
} else { |
| 122 |
switch (e_aci) { |
| 123 |
case AC0_BE: |
| 124 |
acm_ctrl &= (~ACMHW_BEQEN); |
| 125 |
break; |
| 126 |
case AC2_VI: |
| 127 |
acm_ctrl &= (~ACMHW_VIQEN); |
| 128 |
break; |
| 129 |
case AC3_VO: |
| 130 |
acm_ctrl &= (~ACMHW_VOQEN); |
| 131 |
break; |
| 132 |
default: |
| 133 |
pr_err("switch case %#x not processed\n", |
| 134 |
e_aci); |
| 135 |
break; |
| 136 |
} |
| 137 |
} |
| 138 |
rtl_dbg(rtlpriv, COMP_QOS, DBG_TRACE, |
| 139 |
"SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", |
| 140 |
acm_ctrl); |
| 141 |
rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl); |
| 142 |
break; |
| 143 |
} |
| 144 |
case HW_VAR_RCR: |
| 145 |
rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]); |
| 146 |
rtlpci->receive_config = ((u32 *) (val))[0]; |
| 147 |
break; |
| 148 |
case HW_VAR_H2C_FW_JOINBSSRPT: { |
| 149 |
u8 mstatus = (*val); |
| 150 |
u8 tmp_regcr, tmp_reg422; |
| 151 |
bool recover = false; |
| 152 |
|
| 153 |
if (mstatus == RT_MEDIA_CONNECT) { |
| 154 |
rtlpriv->cfg->ops->set_hw_reg(hw, |
| 155 |
HW_VAR_AID, NULL); |
| 156 |
tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1); |
| 157 |
rtl_write_byte(rtlpriv, REG_CR + 1, |
| 158 |
(tmp_regcr | BIT(0))); |
| 159 |
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); |
| 160 |
_rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); |
| 161 |
tmp_reg422 = rtl_read_byte(rtlpriv, |
| 162 |
REG_FWHW_TXQ_CTRL + 2); |
| 163 |
if (tmp_reg422 & BIT(6)) |
| 164 |
recover = true; |
| 165 |
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, |
| 166 |
tmp_reg422 & (~BIT(6))); |
| 167 |
rtl92d_set_fw_rsvdpagepkt(hw, 0); |
| 168 |
_rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| 169 |
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); |
| 170 |
if (recover) |
| 171 |
rtl_write_byte(rtlpriv, |
| 172 |
REG_FWHW_TXQ_CTRL + 2, |
| 173 |
tmp_reg422); |
| 174 |
rtl_write_byte(rtlpriv, REG_CR + 1, |
| 175 |
(tmp_regcr & ~(BIT(0)))); |
| 176 |
} |
| 177 |
rtl92d_set_fw_joinbss_report_cmd(hw, (*val)); |
| 178 |
break; |
| 179 |
} |
| 180 |
case HW_VAR_CORRECT_TSF: { |
| 181 |
u8 btype_ibss = val[0]; |
| 182 |
|
| 183 |
if (btype_ibss) |
| 184 |
rtl92d_stop_tx_beacon(hw); |
| 185 |
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); |
| 186 |
rtl_write_dword(rtlpriv, REG_TSFTR, |
| 187 |
(u32) (mac->tsf & 0xffffffff)); |
| 188 |
rtl_write_dword(rtlpriv, REG_TSFTR + 4, |
| 189 |
(u32) ((mac->tsf >> 32) & 0xffffffff)); |
| 190 |
_rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| 191 |
if (btype_ibss) |
| 192 |
rtl92d_resume_tx_beacon(hw); |
| 193 |
|
| 194 |
break; |
| 195 |
} |
| 196 |
case HW_VAR_INT_MIGRATION: { |
| 197 |
bool int_migration = *(bool *) (val); |
| 198 |
|
| 199 |
if (int_migration) { |
| 200 |
/* Set interrupt migration timer and |
| 201 |
* corresponding Tx/Rx counter. |
| 202 |
* timer 25ns*0xfa0=100us for 0xf packets. |
| 203 |
* 0x306:Rx, 0x307:Tx */ |
| 204 |
rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); |
| 205 |
rtlpriv->dm.interrupt_migration = int_migration; |
| 206 |
} else { |
| 207 |
/* Reset all interrupt migration settings. */ |
| 208 |
rtl_write_dword(rtlpriv, REG_INT_MIG, 0); |
| 209 |
rtlpriv->dm.interrupt_migration = int_migration; |
| 210 |
} |
| 211 |
break; |
| 212 |
} |
| 213 |
case HW_VAR_INT_AC: { |
| 214 |
bool disable_ac_int = *((bool *) val); |
| 215 |
|
| 216 |
/* Disable four ACs interrupts. */ |
| 217 |
if (disable_ac_int) { |
| 218 |
/* Disable VO, VI, BE and BK four AC interrupts |
| 219 |
* to gain more efficient CPU utilization. |
| 220 |
* When extremely highly Rx OK occurs, |
| 221 |
* we will disable Tx interrupts. |
| 222 |
*/ |
| 223 |
rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, |
| 224 |
RT_AC_INT_MASKS); |
| 225 |
rtlpriv->dm.disable_tx_int = disable_ac_int; |
| 226 |
/* Enable four ACs interrupts. */ |
| 227 |
} else { |
| 228 |
rtlpriv->cfg->ops->update_interrupt_mask(hw, |
| 229 |
RT_AC_INT_MASKS, 0); |
| 230 |
rtlpriv->dm.disable_tx_int = disable_ac_int; |
| 231 |
} |
| 232 |
break; |
| 233 |
} |
| 234 |
default: |
| 235 |
rtl92d_set_hw_reg(hw, variable, val); |
| 236 |
break; |
| 237 |
} |
| 238 |
} |
| 239 |
|
| 240 |
static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw) |
| 241 |
{ |
| 242 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 243 |
unsigned short i; |
| 244 |
u8 txpktbuf_bndy; |
| 245 |
u8 maxpage; |
| 246 |
bool status; |
| 247 |
u32 value32; /* High+low page number */ |
| 248 |
u8 value8; /* normal page number */ |
| 249 |
|
| 250 |
if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { |
| 251 |
maxpage = 255; |
| 252 |
txpktbuf_bndy = 246; |
| 253 |
value8 = 0; |
| 254 |
value32 = 0x80bf0d29; |
| 255 |
} else { |
| 256 |
maxpage = 127; |
| 257 |
txpktbuf_bndy = 123; |
| 258 |
value8 = 0; |
| 259 |
value32 = 0x80750005; |
| 260 |
} |
| 261 |
|
| 262 |
/* Set reserved page for each queue */ |
| 263 |
/* 11. RQPN 0x200[31:0] = 0x80BD1C1C */ |
| 264 |
/* load RQPN */ |
| 265 |
rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); |
| 266 |
rtl_write_dword(rtlpriv, REG_RQPN, value32); |
| 267 |
|
| 268 |
/* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */ |
| 269 |
/* TXRKTBUG_PG_BNDY */ |
| 270 |
rtl_write_dword(rtlpriv, REG_TRXFF_BNDY, |
| 271 |
(rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 | |
| 272 |
txpktbuf_bndy)); |
| 273 |
|
| 274 |
/* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */ |
| 275 |
/* Beacon Head for TXDMA */ |
| 276 |
rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy); |
| 277 |
|
| 278 |
/* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */ |
| 279 |
/* BCNQ_PGBNDY */ |
| 280 |
rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); |
| 281 |
rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); |
| 282 |
|
| 283 |
/* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */ |
| 284 |
/* WMAC_LBK_BF_HD */ |
| 285 |
rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy); |
| 286 |
|
| 287 |
/* Set Tx/Rx page size (Tx must be 128 Bytes, */ |
| 288 |
/* Rx can be 64,128,256,512,1024 bytes) */ |
| 289 |
/* 16. PBP [7:0] = 0x11 */ |
| 290 |
/* TRX page size */ |
| 291 |
rtl_write_byte(rtlpriv, REG_PBP, 0x11); |
| 292 |
|
| 293 |
/* 17. DRV_INFO_SZ = 0x04 */ |
| 294 |
rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4); |
| 295 |
|
| 296 |
/* 18. LLT_table_init(Adapter); */ |
| 297 |
for (i = 0; i < (txpktbuf_bndy - 1); i++) { |
| 298 |
status = rtl92d_llt_write(hw, i, i + 1); |
| 299 |
if (!status) |
| 300 |
return status; |
| 301 |
} |
| 302 |
|
| 303 |
/* end of list */ |
| 304 |
status = rtl92d_llt_write(hw, (txpktbuf_bndy - 1), 0xFF); |
| 305 |
if (!status) |
| 306 |
return status; |
| 307 |
|
| 308 |
/* Make the other pages as ring buffer */ |
| 309 |
/* This ring buffer is used as beacon buffer if we */ |
| 310 |
/* config this MAC as two MAC transfer. */ |
| 311 |
/* Otherwise used as local loopback buffer. */ |
| 312 |
for (i = txpktbuf_bndy; i < maxpage; i++) { |
| 313 |
status = rtl92d_llt_write(hw, i, (i + 1)); |
| 314 |
if (!status) |
| 315 |
return status; |
| 316 |
} |
| 317 |
|
| 318 |
/* Let last entry point to the start entry of ring buffer */ |
| 319 |
status = rtl92d_llt_write(hw, maxpage, txpktbuf_bndy); |
| 320 |
if (!status) |
| 321 |
return status; |
| 322 |
|
| 323 |
return true; |
| 324 |
} |
| 325 |
|
| 326 |
static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw) |
| 327 |
{ |
| 328 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 329 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 330 |
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| 331 |
enum rtl_led_pin pin0 = rtlpriv->ledctl.sw_led0; |
| 332 |
|
| 333 |
if (rtlpci->up_first_time) |
| 334 |
return; |
| 335 |
if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) |
| 336 |
rtl92de_sw_led_on(hw, pin0); |
| 337 |
else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT) |
| 338 |
rtl92de_sw_led_on(hw, pin0); |
| 339 |
else |
| 340 |
rtl92de_sw_led_off(hw, pin0); |
| 341 |
} |
| 342 |
|
| 343 |
static bool _rtl92de_init_mac(struct ieee80211_hw *hw) |
| 344 |
{ |
| 345 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 346 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 347 |
unsigned char bytetmp; |
| 348 |
unsigned short wordtmp; |
| 349 |
u16 retry; |
| 350 |
|
| 351 |
rtl92d_phy_set_poweron(hw); |
| 352 |
/* Add for resume sequence of power domain according |
| 353 |
* to power document V11. Chapter V.11.... */ |
| 354 |
/* 0. RSV_CTRL 0x1C[7:0] = 0x00 */ |
| 355 |
/* unlock ISO/CLK/Power control register */ |
| 356 |
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00); |
| 357 |
rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05); |
| 358 |
|
| 359 |
/* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */ |
| 360 |
/* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */ |
| 361 |
/* 3. delay (1ms) this is not necessary when initially power on */ |
| 362 |
|
| 363 |
/* C. Resume Sequence */ |
| 364 |
/* a. SPS0_CTRL 0x11[7:0] = 0x2b */ |
| 365 |
rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b); |
| 366 |
|
| 367 |
/* b. AFE_XTAL_CTRL [7:0] = 0x0F */ |
| 368 |
rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F); |
| 369 |
|
| 370 |
/* c. DRV runs power on init flow */ |
| 371 |
|
| 372 |
/* auto enable WLAN */ |
| 373 |
/* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */ |
| 374 |
/* Power On Reset for MAC Block */ |
| 375 |
bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0); |
| 376 |
udelay(2); |
| 377 |
rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp); |
| 378 |
udelay(2); |
| 379 |
|
| 380 |
/* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */ |
| 381 |
bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); |
| 382 |
udelay(50); |
| 383 |
retry = 0; |
| 384 |
while ((bytetmp & BIT(0)) && retry < 1000) { |
| 385 |
retry++; |
| 386 |
bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); |
| 387 |
udelay(50); |
| 388 |
} |
| 389 |
|
| 390 |
/* Enable Radio off, GPIO, and LED function */ |
| 391 |
/* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */ |
| 392 |
rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012); |
| 393 |
|
| 394 |
/* release RF digital isolation */ |
| 395 |
/* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */ |
| 396 |
/*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */ |
| 397 |
rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82); |
| 398 |
udelay(2); |
| 399 |
|
| 400 |
/* make sure that BB reset OK. */ |
| 401 |
/* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */ |
| 402 |
|
| 403 |
/* Disable REG_CR before enable it to assure reset */ |
| 404 |
rtl_write_word(rtlpriv, REG_CR, 0x0); |
| 405 |
|
| 406 |
/* Release MAC IO register reset */ |
| 407 |
rtl_write_word(rtlpriv, REG_CR, 0x2ff); |
| 408 |
|
| 409 |
/* clear stopping tx/rx dma */ |
| 410 |
rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0); |
| 411 |
|
| 412 |
/* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */ |
| 413 |
|
| 414 |
/* System init */ |
| 415 |
/* 18. LLT_table_init(Adapter); */ |
| 416 |
if (!_rtl92de_llt_table_init(hw)) |
| 417 |
return false; |
| 418 |
|
| 419 |
/* Clear interrupt and enable interrupt */ |
| 420 |
/* 19. HISR 0x124[31:0] = 0xffffffff; */ |
| 421 |
/* HISRE 0x12C[7:0] = 0xFF */ |
| 422 |
rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff); |
| 423 |
rtl_write_byte(rtlpriv, REG_HISRE, 0xff); |
| 424 |
|
| 425 |
/* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */ |
| 426 |
/* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */ |
| 427 |
/* The IMR should be enabled later after all init sequence |
| 428 |
* is finished. */ |
| 429 |
|
| 430 |
/* 22. PCIE configuration space configuration */ |
| 431 |
/* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */ |
| 432 |
/* and PCIe gated clock function is enabled. */ |
| 433 |
/* PCIE configuration space will be written after |
| 434 |
* all init sequence.(Or by BIOS) */ |
| 435 |
|
| 436 |
rtl92d_phy_config_maccoexist_rfpage(hw); |
| 437 |
|
| 438 |
/* THe below section is not related to power document Vxx . */ |
| 439 |
/* This is only useful for driver and OS setting. */ |
| 440 |
/* -------------------Software Relative Setting---------------------- */ |
| 441 |
wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL); |
| 442 |
wordtmp &= 0xf; |
| 443 |
wordtmp |= 0xF771; |
| 444 |
rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp); |
| 445 |
|
| 446 |
/* Reported Tx status from HW for rate adaptive. */ |
| 447 |
/* This should be realtive to power on step 14. But in document V11 */ |
| 448 |
/* still not contain the description.!!! */ |
| 449 |
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F); |
| 450 |
|
| 451 |
/* Set Tx/Rx page size (Tx must be 128 Bytes, |
| 452 |
* Rx can be 64,128,256,512,1024 bytes) */ |
| 453 |
/* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */ |
| 454 |
|
| 455 |
/* Set RCR register */ |
| 456 |
rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config); |
| 457 |
/* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */ |
| 458 |
|
| 459 |
/* Set TCR register */ |
| 460 |
rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config); |
| 461 |
|
| 462 |
/* disable earlymode */ |
| 463 |
rtl_write_byte(rtlpriv, 0x4d0, 0x0); |
| 464 |
|
| 465 |
/* Set TX/RX descriptor physical address(from OS API). */ |
| 466 |
rtl_write_dword(rtlpriv, REG_BCNQ_DESA, |
| 467 |
rtlpci->tx_ring[BEACON_QUEUE].dma); |
| 468 |
rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma); |
| 469 |
rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma); |
| 470 |
rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma); |
| 471 |
rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma); |
| 472 |
rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma); |
| 473 |
rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma); |
| 474 |
/* Set RX Desc Address */ |
| 475 |
rtl_write_dword(rtlpriv, REG_RX_DESA, |
| 476 |
rtlpci->rx_ring[RX_MPDU_QUEUE].dma); |
| 477 |
|
| 478 |
/* if we want to support 64 bit DMA, we should set it here, |
| 479 |
* but now we do not support 64 bit DMA*/ |
| 480 |
|
| 481 |
rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33); |
| 482 |
|
| 483 |
/* Reset interrupt migration setting when initialization */ |
| 484 |
rtl_write_dword(rtlpriv, REG_INT_MIG, 0); |
| 485 |
|
| 486 |
/* Reconsider when to do this operation after asking HWSD. */ |
| 487 |
bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); |
| 488 |
rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6)); |
| 489 |
do { |
| 490 |
retry++; |
| 491 |
bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); |
| 492 |
} while ((retry < 200) && !(bytetmp & BIT(7))); |
| 493 |
|
| 494 |
/* After MACIO reset,we must refresh LED state. */ |
| 495 |
_rtl92de_gen_refresh_led_state(hw); |
| 496 |
|
| 497 |
/* Reset H2C protection register */ |
| 498 |
rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0); |
| 499 |
|
| 500 |
return true; |
| 501 |
} |
| 502 |
|
| 503 |
static void _rtl92de_hw_configure(struct ieee80211_hw *hw) |
| 504 |
{ |
| 505 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 506 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 507 |
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| 508 |
u8 reg_bw_opmode = BW_OPMODE_20MHZ; |
| 509 |
u32 reg_rrsr; |
| 510 |
|
| 511 |
reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; |
| 512 |
rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8); |
| 513 |
rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode); |
| 514 |
rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr); |
| 515 |
rtl_write_byte(rtlpriv, REG_SLOT, 0x09); |
| 516 |
rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0); |
| 517 |
rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80); |
| 518 |
rtl_write_word(rtlpriv, REG_RL, 0x0707); |
| 519 |
rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802); |
| 520 |
rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF); |
| 521 |
rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000); |
| 522 |
rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504); |
| 523 |
rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000); |
| 524 |
rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504); |
| 525 |
/* Aggregation threshold */ |
| 526 |
if (rtlhal->macphymode == DUALMAC_DUALPHY) |
| 527 |
rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641); |
| 528 |
else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) |
| 529 |
rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641); |
| 530 |
else |
| 531 |
rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841); |
| 532 |
rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2); |
| 533 |
rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); |
| 534 |
rtlpci->reg_bcn_ctrl_val = 0x1f; |
| 535 |
rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val); |
| 536 |
rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); |
| 537 |
rtl_write_byte(rtlpriv, REG_PIFS, 0x1C); |
| 538 |
rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16); |
| 539 |
rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020); |
| 540 |
/* For throughput */ |
| 541 |
rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666); |
| 542 |
/* ACKTO for IOT issue. */ |
| 543 |
rtl_write_byte(rtlpriv, REG_ACKTO, 0x40); |
| 544 |
/* Set Spec SIFS (used in NAV) */ |
| 545 |
rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010); |
| 546 |
rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010); |
| 547 |
/* Set SIFS for CCK */ |
| 548 |
rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010); |
| 549 |
/* Set SIFS for OFDM */ |
| 550 |
rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010); |
| 551 |
/* Set Multicast Address. */ |
| 552 |
rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff); |
| 553 |
rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff); |
| 554 |
switch (rtlpriv->phy.rf_type) { |
| 555 |
case RF_1T2R: |
| 556 |
case RF_1T1R: |
| 557 |
rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); |
| 558 |
break; |
| 559 |
case RF_2T2R: |
| 560 |
case RF_2T2R_GREEN: |
| 561 |
rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); |
| 562 |
break; |
| 563 |
} |
| 564 |
} |
| 565 |
|
| 566 |
static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw) |
| 567 |
{ |
| 568 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 569 |
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| 570 |
|
| 571 |
rtl_write_byte(rtlpriv, 0x34b, 0x93); |
| 572 |
rtl_write_word(rtlpriv, 0x350, 0x870c); |
| 573 |
rtl_write_byte(rtlpriv, 0x352, 0x1); |
| 574 |
if (ppsc->support_backdoor) |
| 575 |
rtl_write_byte(rtlpriv, 0x349, 0x1b); |
| 576 |
else |
| 577 |
rtl_write_byte(rtlpriv, 0x349, 0x03); |
| 578 |
rtl_write_word(rtlpriv, 0x350, 0x2718); |
| 579 |
rtl_write_byte(rtlpriv, 0x352, 0x1); |
| 580 |
} |
| 581 |
|
| 582 |
int rtl92de_hw_init(struct ieee80211_hw *hw) |
| 583 |
{ |
| 584 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 585 |
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| 586 |
struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| 587 |
struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| 588 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 589 |
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| 590 |
bool rtstatus = true; |
| 591 |
u8 tmp_u1b; |
| 592 |
int i; |
| 593 |
int err; |
| 594 |
unsigned long flags; |
| 595 |
|
| 596 |
rtlpci->being_init_adapter = true; |
| 597 |
rtlpci->init_ready = false; |
| 598 |
spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); |
| 599 |
/* we should do iqk after disable/enable */ |
| 600 |
rtl92d_phy_reset_iqk_result(hw); |
| 601 |
/* rtlpriv->intf_ops->disable_aspm(hw); */ |
| 602 |
rtstatus = _rtl92de_init_mac(hw); |
| 603 |
if (!rtstatus) { |
| 604 |
pr_err("Init MAC failed\n"); |
| 605 |
err = 1; |
| 606 |
spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); |
| 607 |
return err; |
| 608 |
} |
| 609 |
err = rtl92d_download_fw(hw); |
| 610 |
spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); |
| 611 |
if (err) { |
| 612 |
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, |
| 613 |
"Failed to download FW. Init HW without FW..\n"); |
| 614 |
return 1; |
| 615 |
} |
| 616 |
rtlhal->last_hmeboxnum = 0; |
| 617 |
rtlpriv->psc.fw_current_inpsmode = false; |
| 618 |
|
| 619 |
tmp_u1b = rtl_read_byte(rtlpriv, 0x605); |
| 620 |
tmp_u1b = tmp_u1b | 0x30; |
| 621 |
rtl_write_byte(rtlpriv, 0x605, tmp_u1b); |
| 622 |
|
| 623 |
if (rtlhal->earlymode_enable) { |
| 624 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, |
| 625 |
"EarlyMode Enabled!!!\n"); |
| 626 |
|
| 627 |
tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0); |
| 628 |
tmp_u1b = tmp_u1b | 0x1f; |
| 629 |
rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b); |
| 630 |
|
| 631 |
rtl_write_byte(rtlpriv, 0x4d3, 0x80); |
| 632 |
|
| 633 |
tmp_u1b = rtl_read_byte(rtlpriv, 0x605); |
| 634 |
tmp_u1b = tmp_u1b | 0x40; |
| 635 |
rtl_write_byte(rtlpriv, 0x605, tmp_u1b); |
| 636 |
} |
| 637 |
|
| 638 |
if (mac->rdg_en) { |
| 639 |
rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff); |
| 640 |
rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200); |
| 641 |
rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05); |
| 642 |
} |
| 643 |
|
| 644 |
rtl92d_phy_mac_config(hw); |
| 645 |
/* because last function modify RCR, so we update |
| 646 |
* rcr var here, or TP will unstable for receive_config |
| 647 |
* is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx |
| 648 |
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/ |
| 649 |
rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR); |
| 650 |
rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); |
| 651 |
|
| 652 |
rtl92d_phy_bb_config(hw); |
| 653 |
|
| 654 |
rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; |
| 655 |
/* set before initialize RF */ |
| 656 |
rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); |
| 657 |
|
| 658 |
/* config RF */ |
| 659 |
rtl92d_phy_rf_config(hw); |
| 660 |
|
| 661 |
/* After read predefined TXT, we must set BB/MAC/RF |
| 662 |
* register as our requirement */ |
| 663 |
/* After load BB,RF params,we need do more for 92D. */ |
| 664 |
rtl92d_update_bbrf_configuration(hw); |
| 665 |
/* set default value after initialize RF, */ |
| 666 |
rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0); |
| 667 |
rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0, |
| 668 |
RF_CHNLBW, RFREG_OFFSET_MASK); |
| 669 |
rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1, |
| 670 |
RF_CHNLBW, RFREG_OFFSET_MASK); |
| 671 |
|
| 672 |
/*---- Set CCK and OFDM Block "ON"----*/ |
| 673 |
if (rtlhal->current_bandtype == BAND_ON_2_4G) |
| 674 |
rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); |
| 675 |
rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); |
| 676 |
if (rtlhal->interfaceindex == 0) { |
| 677 |
/* RFPGA0_ANALOGPARAMETER2: cck clock select, |
| 678 |
* set to 20MHz by default */ |
| 679 |
rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) | |
| 680 |
BIT(11), 3); |
| 681 |
} else { |
| 682 |
/* Mac1 */ |
| 683 |
rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) | |
| 684 |
BIT(10), 3); |
| 685 |
} |
| 686 |
|
| 687 |
_rtl92de_hw_configure(hw); |
| 688 |
|
| 689 |
/* reset hw sec */ |
| 690 |
rtl_cam_reset_all_entry(hw); |
| 691 |
rtl92d_enable_hw_security_config(hw); |
| 692 |
|
| 693 |
/* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ |
| 694 |
/* TX power index for different rate set. */ |
| 695 |
rtl92d_phy_get_hw_reg_originalvalue(hw); |
| 696 |
rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel); |
| 697 |
|
| 698 |
ppsc->rfpwr_state = ERFON; |
| 699 |
|
| 700 |
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); |
| 701 |
|
| 702 |
_rtl92de_enable_aspm_back_door(hw); |
| 703 |
/* rtlpriv->intf_ops->enable_aspm(hw); */ |
| 704 |
|
| 705 |
rtl92de_dm_init(hw); |
| 706 |
rtlpci->being_init_adapter = false; |
| 707 |
|
| 708 |
if (ppsc->rfpwr_state == ERFON) { |
| 709 |
rtl92d_phy_lc_calibrate(hw, IS_92D_SINGLEPHY(rtlhal->version)); |
| 710 |
/* 5G and 2.4G must wait sometime to let RF LO ready */ |
| 711 |
if (rtlhal->macphymode == DUALMAC_DUALPHY) { |
| 712 |
u32 tmp_rega; |
| 713 |
for (i = 0; i < 10000; i++) { |
| 714 |
udelay(MAX_STALL_TIME); |
| 715 |
|
| 716 |
tmp_rega = rtl_get_rfreg(hw, |
| 717 |
(enum radio_path)RF90_PATH_A, |
| 718 |
0x2a, MASKDWORD); |
| 719 |
|
| 720 |
if (((tmp_rega & BIT(11)) == BIT(11))) |
| 721 |
break; |
| 722 |
} |
| 723 |
/* check that loop was successful. If not, exit now */ |
| 724 |
if (i == 10000) { |
| 725 |
rtlpci->init_ready = false; |
| 726 |
return 1; |
| 727 |
} |
| 728 |
} |
| 729 |
} |
| 730 |
rtlpci->init_ready = true; |
| 731 |
return err; |
| 732 |
} |
| 733 |
|
| 734 |
static int _rtl92de_set_media_status(struct ieee80211_hw *hw, |
| 735 |
enum nl80211_iftype type) |
| 736 |
{ |
| 737 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 738 |
u8 bt_msr = rtl_read_byte(rtlpriv, MSR); |
| 739 |
enum led_ctl_mode ledaction = LED_CTL_NO_LINK; |
| 740 |
|
| 741 |
bt_msr &= 0xfc; |
| 742 |
|
| 743 |
if (type == NL80211_IFTYPE_UNSPECIFIED || |
| 744 |
type == NL80211_IFTYPE_STATION) { |
| 745 |
rtl92d_stop_tx_beacon(hw); |
| 746 |
_rtl92de_enable_bcn_sub_func(hw); |
| 747 |
} else if (type == NL80211_IFTYPE_ADHOC || |
| 748 |
type == NL80211_IFTYPE_AP) { |
| 749 |
rtl92d_resume_tx_beacon(hw); |
| 750 |
_rtl92de_disable_bcn_sub_func(hw); |
| 751 |
} else { |
| 752 |
rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, |
| 753 |
"Set HW_VAR_MEDIA_STATUS: No such media status(%x)\n", |
| 754 |
type); |
| 755 |
} |
| 756 |
switch (type) { |
| 757 |
case NL80211_IFTYPE_UNSPECIFIED: |
| 758 |
bt_msr |= MSR_NOLINK; |
| 759 |
ledaction = LED_CTL_LINK; |
| 760 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, |
| 761 |
"Set Network type to NO LINK!\n"); |
| 762 |
break; |
| 763 |
case NL80211_IFTYPE_ADHOC: |
| 764 |
bt_msr |= MSR_ADHOC; |
| 765 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, |
| 766 |
"Set Network type to Ad Hoc!\n"); |
| 767 |
break; |
| 768 |
case NL80211_IFTYPE_STATION: |
| 769 |
bt_msr |= MSR_INFRA; |
| 770 |
ledaction = LED_CTL_LINK; |
| 771 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, |
| 772 |
"Set Network type to STA!\n"); |
| 773 |
break; |
| 774 |
case NL80211_IFTYPE_AP: |
| 775 |
bt_msr |= MSR_AP; |
| 776 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, |
| 777 |
"Set Network type to AP!\n"); |
| 778 |
break; |
| 779 |
default: |
| 780 |
pr_err("Network type %d not supported!\n", type); |
| 781 |
return 1; |
| 782 |
} |
| 783 |
rtl_write_byte(rtlpriv, MSR, bt_msr); |
| 784 |
rtlpriv->cfg->ops->led_control(hw, ledaction); |
| 785 |
if ((bt_msr & MSR_MASK) == MSR_AP) |
| 786 |
rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00); |
| 787 |
else |
| 788 |
rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66); |
| 789 |
return 0; |
| 790 |
} |
| 791 |
|
| 792 |
void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) |
| 793 |
{ |
| 794 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 795 |
u32 reg_rcr; |
| 796 |
|
| 797 |
if (rtlpriv->psc.rfpwr_state != ERFON) |
| 798 |
return; |
| 799 |
|
| 800 |
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); |
| 801 |
|
| 802 |
if (check_bssid) { |
| 803 |
reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); |
| 804 |
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); |
| 805 |
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); |
| 806 |
} else if (!check_bssid) { |
| 807 |
reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); |
| 808 |
_rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); |
| 809 |
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); |
| 810 |
} |
| 811 |
} |
| 812 |
|
| 813 |
int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) |
| 814 |
{ |
| 815 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 816 |
|
| 817 |
if (_rtl92de_set_media_status(hw, type)) |
| 818 |
return -EOPNOTSUPP; |
| 819 |
|
| 820 |
/* check bssid */ |
| 821 |
if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { |
| 822 |
if (type != NL80211_IFTYPE_AP) |
| 823 |
rtl92de_set_check_bssid(hw, true); |
| 824 |
} else { |
| 825 |
rtl92de_set_check_bssid(hw, false); |
| 826 |
} |
| 827 |
return 0; |
| 828 |
} |
| 829 |
|
| 830 |
/* do iqk or reload iqk */ |
| 831 |
/* windows just rtl92d_phy_reload_iqk_setting in set channel, |
| 832 |
* but it's very strict for time sequence so we add |
| 833 |
* rtl92d_phy_reload_iqk_setting here */ |
| 834 |
void rtl92d_linked_set_reg(struct ieee80211_hw *hw) |
| 835 |
{ |
| 836 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 837 |
struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| 838 |
u8 indexforchannel; |
| 839 |
u8 channel = rtlphy->current_channel; |
| 840 |
|
| 841 |
indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel); |
| 842 |
if (!rtlphy->iqk_matrix[indexforchannel].iqk_done) { |
| 843 |
rtl_dbg(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG, |
| 844 |
"Do IQK for channel:%d\n", channel); |
| 845 |
rtl92d_phy_iq_calibrate(hw); |
| 846 |
} |
| 847 |
} |
| 848 |
|
| 849 |
void rtl92de_enable_interrupt(struct ieee80211_hw *hw) |
| 850 |
{ |
| 851 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 852 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 853 |
|
| 854 |
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF); |
| 855 |
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF); |
| 856 |
rtlpci->irq_enabled = true; |
| 857 |
} |
| 858 |
|
| 859 |
void rtl92de_disable_interrupt(struct ieee80211_hw *hw) |
| 860 |
{ |
| 861 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 862 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 863 |
|
| 864 |
rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED); |
| 865 |
rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED); |
| 866 |
rtlpci->irq_enabled = false; |
| 867 |
} |
| 868 |
|
| 869 |
static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw) |
| 870 |
{ |
| 871 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 872 |
u8 u1b_tmp; |
| 873 |
unsigned long flags; |
| 874 |
|
| 875 |
rtlpriv->intf_ops->enable_aspm(hw); |
| 876 |
rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00); |
| 877 |
rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0); |
| 878 |
rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0); |
| 879 |
|
| 880 |
/* 0x20:value 05-->04 */ |
| 881 |
rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04); |
| 882 |
|
| 883 |
/* ==== Reset digital sequence ====== */ |
| 884 |
rtl92d_firmware_selfreset(hw); |
| 885 |
|
| 886 |
/* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */ |
| 887 |
rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51); |
| 888 |
|
| 889 |
/* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */ |
| 890 |
rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00); |
| 891 |
|
| 892 |
/* ==== Pull GPIO PIN to balance level and LED control ====== */ |
| 893 |
|
| 894 |
/* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */ |
| 895 |
rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000); |
| 896 |
|
| 897 |
/* i. Value = GPIO_PIN_CTRL[7:0] */ |
| 898 |
u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL); |
| 899 |
|
| 900 |
/* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */ |
| 901 |
/* write external PIN level */ |
| 902 |
rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, |
| 903 |
0x00FF0000 | (u1b_tmp << 8)); |
| 904 |
|
| 905 |
/* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */ |
| 906 |
rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790); |
| 907 |
|
| 908 |
/* l. LEDCFG 0x4C[15:0] = 0x8080 */ |
| 909 |
rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080); |
| 910 |
|
| 911 |
/* ==== Disable analog sequence === */ |
| 912 |
|
| 913 |
/* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */ |
| 914 |
rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80); |
| 915 |
|
| 916 |
/* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */ |
| 917 |
rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23); |
| 918 |
|
| 919 |
/* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */ |
| 920 |
rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e); |
| 921 |
|
| 922 |
/* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */ |
| 923 |
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e); |
| 924 |
|
| 925 |
/* ==== interface into suspend === */ |
| 926 |
|
| 927 |
/* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */ |
| 928 |
/* According to power document V11, we need to set this */ |
| 929 |
/* value as 0x18. Otherwise, we may not L0s sometimes. */ |
| 930 |
/* This indluences power consumption. Bases on SD1's test, */ |
| 931 |
/* set as 0x00 do not affect power current. And if it */ |
| 932 |
/* is set as 0x18, they had ever met auto load fail problem. */ |
| 933 |
rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10); |
| 934 |
|
| 935 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, |
| 936 |
"In PowerOff,reg0x%x=%X\n", |
| 937 |
REG_SPS0_CTRL, rtl_read_byte(rtlpriv, REG_SPS0_CTRL)); |
| 938 |
/* r. Note: for PCIe interface, PON will not turn */ |
| 939 |
/* off m-bias and BandGap in PCIe suspend mode. */ |
| 940 |
|
| 941 |
/* 0x17[7] 1b': power off in process 0b' : power off over */ |
| 942 |
if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { |
| 943 |
spin_lock_irqsave(&globalmutex_power, flags); |
| 944 |
u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS); |
| 945 |
u1b_tmp &= (~BIT(7)); |
| 946 |
rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp); |
| 947 |
spin_unlock_irqrestore(&globalmutex_power, flags); |
| 948 |
} |
| 949 |
|
| 950 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "<=======\n"); |
| 951 |
} |
| 952 |
|
| 953 |
void rtl92de_card_disable(struct ieee80211_hw *hw) |
| 954 |
{ |
| 955 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 956 |
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| 957 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 958 |
struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| 959 |
enum nl80211_iftype opmode; |
| 960 |
|
| 961 |
mac->link_state = MAC80211_NOLINK; |
| 962 |
opmode = NL80211_IFTYPE_UNSPECIFIED; |
| 963 |
_rtl92de_set_media_status(hw, opmode); |
| 964 |
|
| 965 |
if (rtlpci->driver_is_goingto_unload || |
| 966 |
ppsc->rfoff_reason > RF_CHANGE_BY_PS) |
| 967 |
rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); |
| 968 |
RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); |
| 969 |
/* Power sequence for each MAC. */ |
| 970 |
/* a. stop tx DMA */ |
| 971 |
/* b. close RF */ |
| 972 |
/* c. clear rx buf */ |
| 973 |
/* d. stop rx DMA */ |
| 974 |
/* e. reset MAC */ |
| 975 |
|
| 976 |
/* a. stop tx DMA */ |
| 977 |
rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE); |
| 978 |
udelay(50); |
| 979 |
|
| 980 |
/* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */ |
| 981 |
|
| 982 |
/* c. ========RF OFF sequence========== */ |
| 983 |
/* 0x88c[23:20] = 0xf. */ |
| 984 |
rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); |
| 985 |
rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00); |
| 986 |
|
| 987 |
/* APSD_CTRL 0x600[7:0] = 0x40 */ |
| 988 |
rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40); |
| 989 |
|
| 990 |
/* Close antenna 0,0xc04,0xd04 */ |
| 991 |
rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0); |
| 992 |
rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0); |
| 993 |
|
| 994 |
/* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */ |
| 995 |
rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2); |
| 996 |
|
| 997 |
/* Mac0 can not do Global reset. Mac1 can do. */ |
| 998 |
/* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */ |
| 999 |
if (rtlpriv->rtlhal.interfaceindex == 1) |
| 1000 |
rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0); |
| 1001 |
udelay(50); |
| 1002 |
|
| 1003 |
/* d. stop tx/rx dma before disable REG_CR (0x100) to fix */ |
| 1004 |
/* dma hang issue when disable/enable device. */ |
| 1005 |
rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff); |
| 1006 |
udelay(50); |
| 1007 |
rtl_write_byte(rtlpriv, REG_CR, 0x0); |
| 1008 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "==> Do power off.......\n"); |
| 1009 |
if (rtl92d_phy_check_poweroff(hw)) |
| 1010 |
_rtl92de_poweroff_adapter(hw); |
| 1011 |
return; |
| 1012 |
} |
| 1013 |
|
| 1014 |
void rtl92de_interrupt_recognized(struct ieee80211_hw *hw, |
| 1015 |
struct rtl_int *intvec) |
| 1016 |
{ |
| 1017 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1018 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 1019 |
|
| 1020 |
intvec->inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; |
| 1021 |
rtl_write_dword(rtlpriv, ISR, intvec->inta); |
| 1022 |
} |
| 1023 |
|
| 1024 |
void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw) |
| 1025 |
{ |
| 1026 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1027 |
struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| 1028 |
u16 bcn_interval, atim_window; |
| 1029 |
|
| 1030 |
bcn_interval = mac->beacon_interval; |
| 1031 |
atim_window = 2; |
| 1032 |
rtl92de_disable_interrupt(hw); |
| 1033 |
rtl_write_word(rtlpriv, REG_ATIMWND, atim_window); |
| 1034 |
rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); |
| 1035 |
rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f); |
| 1036 |
rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20); |
| 1037 |
if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G) |
| 1038 |
rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30); |
| 1039 |
else |
| 1040 |
rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20); |
| 1041 |
rtl_write_byte(rtlpriv, 0x606, 0x30); |
| 1042 |
} |
| 1043 |
|
| 1044 |
void rtl92de_set_beacon_interval(struct ieee80211_hw *hw) |
| 1045 |
{ |
| 1046 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1047 |
struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| 1048 |
u16 bcn_interval = mac->beacon_interval; |
| 1049 |
|
| 1050 |
rtl_dbg(rtlpriv, COMP_BEACON, DBG_DMESG, |
| 1051 |
"beacon_interval:%d\n", bcn_interval); |
| 1052 |
rtl92de_disable_interrupt(hw); |
| 1053 |
rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); |
| 1054 |
rtl92de_enable_interrupt(hw); |
| 1055 |
} |
| 1056 |
|
| 1057 |
void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw, |
| 1058 |
u32 add_msr, u32 rm_msr) |
| 1059 |
{ |
| 1060 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1061 |
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); |
| 1062 |
|
| 1063 |
rtl_dbg(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n", |
| 1064 |
add_msr, rm_msr); |
| 1065 |
if (add_msr) |
| 1066 |
rtlpci->irq_mask[0] |= add_msr; |
| 1067 |
if (rm_msr) |
| 1068 |
rtlpci->irq_mask[0] &= (~rm_msr); |
| 1069 |
rtl92de_disable_interrupt(hw); |
| 1070 |
rtl92de_enable_interrupt(hw); |
| 1071 |
} |
| 1072 |
|
| 1073 |
void rtl92de_suspend(struct ieee80211_hw *hw) |
| 1074 |
{ |
| 1075 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1076 |
|
| 1077 |
rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv, |
| 1078 |
REG_MAC_PHY_CTRL_NORMAL); |
| 1079 |
} |
| 1080 |
|
| 1081 |
void rtl92de_resume(struct ieee80211_hw *hw) |
| 1082 |
{ |
| 1083 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1084 |
|
| 1085 |
rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL, |
| 1086 |
rtlpriv->rtlhal.macphyctl_reg); |
| 1087 |
} |