| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* Copyright(c) 2009-2012 Realtek Corporation.*/ |
| 3 |
|
| 4 |
#include "wifi.h" |
| 5 |
#include "core.h" |
| 6 |
#include "usb.h" |
| 7 |
#include "base.h" |
| 8 |
#include "ps.h" |
| 9 |
#include "rtl8192c/fw_common.h" |
| 10 |
#include <linux/export.h> |
| 11 |
#include <linux/module.h> |
| 12 |
|
| 13 |
MODULE_AUTHOR("lizhaoming <[email protected]>"); |
| 14 |
MODULE_AUTHOR("Realtek WlanFAE <[email protected]>"); |
| 15 |
MODULE_AUTHOR("Larry Finger <[email protected]>"); |
| 16 |
MODULE_LICENSE("GPL"); |
| 17 |
MODULE_DESCRIPTION("USB basic driver for rtlwifi"); |
| 18 |
|
| 19 |
#define REALTEK_USB_VENQT_READ 0xC0 |
| 20 |
#define REALTEK_USB_VENQT_WRITE 0x40 |
| 21 |
#define REALTEK_USB_VENQT_CMD_REQ 0x05 |
| 22 |
#define REALTEK_USB_VENQT_CMD_IDX 0x00 |
| 23 |
|
| 24 |
#define MAX_USBCTRL_VENDORREQ_TIMES 10 |
| 25 |
|
| 26 |
static void _rtl_usb_cleanup_tx(struct ieee80211_hw *hw); |
| 27 |
|
| 28 |
static void _usbctrl_vendorreq_sync(struct usb_device *udev, u8 reqtype, |
| 29 |
u16 value, void *pdata, u16 len) |
| 30 |
{ |
| 31 |
unsigned int pipe; |
| 32 |
int status; |
| 33 |
int vendorreq_times = 0; |
| 34 |
static int count; |
| 35 |
|
| 36 |
if (reqtype == REALTEK_USB_VENQT_READ) |
| 37 |
pipe = usb_rcvctrlpipe(udev, 0); /* read_in */ |
| 38 |
else |
| 39 |
pipe = usb_sndctrlpipe(udev, 0); /* write_out */ |
| 40 |
|
| 41 |
do { |
| 42 |
status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ, |
| 43 |
reqtype, value, REALTEK_USB_VENQT_CMD_IDX, |
| 44 |
pdata, len, 1000); |
| 45 |
if (status < 0) { |
| 46 |
/* firmware download is checksumed, don't retry */ |
| 47 |
if ((value >= FW_8192C_START_ADDRESS && |
| 48 |
value <= FW_8192C_END_ADDRESS)) |
| 49 |
break; |
| 50 |
} else { |
| 51 |
break; |
| 52 |
} |
| 53 |
} while (++vendorreq_times < MAX_USBCTRL_VENDORREQ_TIMES); |
| 54 |
|
| 55 |
if (status < 0 && count++ < 4) |
| 56 |
dev_err(&udev->dev, "reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x reqtype=0x%x\n", |
| 57 |
value, status, *(u32 *)pdata, reqtype); |
| 58 |
} |
| 59 |
|
| 60 |
static u32 _usb_read_sync(struct rtl_priv *rtlpriv, u32 addr, u16 len) |
| 61 |
{ |
| 62 |
struct device *dev = rtlpriv->io.dev; |
| 63 |
struct usb_device *udev = to_usb_device(dev); |
| 64 |
u16 wvalue; |
| 65 |
__le32 *data; |
| 66 |
unsigned long flags; |
| 67 |
|
| 68 |
spin_lock_irqsave(&rtlpriv->locks.usb_lock, flags); |
| 69 |
if (++rtlpriv->usb_data_index >= RTL_USB_MAX_RX_COUNT) |
| 70 |
rtlpriv->usb_data_index = 0; |
| 71 |
data = &rtlpriv->usb_data[rtlpriv->usb_data_index]; |
| 72 |
spin_unlock_irqrestore(&rtlpriv->locks.usb_lock, flags); |
| 73 |
|
| 74 |
wvalue = (u16)addr; |
| 75 |
_usbctrl_vendorreq_sync(udev, REALTEK_USB_VENQT_READ, wvalue, data, len); |
| 76 |
return le32_to_cpu(*data); |
| 77 |
} |
| 78 |
|
| 79 |
|
| 80 |
static void _usb_write_sync(struct rtl_priv *rtlpriv, u32 addr, u32 val, u16 len) |
| 81 |
{ |
| 82 |
struct device *dev = rtlpriv->io.dev; |
| 83 |
struct usb_device *udev = to_usb_device(dev); |
| 84 |
unsigned long flags; |
| 85 |
__le32 *data; |
| 86 |
u16 wvalue; |
| 87 |
|
| 88 |
spin_lock_irqsave(&rtlpriv->locks.usb_lock, flags); |
| 89 |
if (++rtlpriv->usb_data_index >= RTL_USB_MAX_RX_COUNT) |
| 90 |
rtlpriv->usb_data_index = 0; |
| 91 |
data = &rtlpriv->usb_data[rtlpriv->usb_data_index]; |
| 92 |
spin_unlock_irqrestore(&rtlpriv->locks.usb_lock, flags); |
| 93 |
|
| 94 |
wvalue = (u16)(addr & 0x0000ffff); |
| 95 |
*data = cpu_to_le32(val); |
| 96 |
|
| 97 |
_usbctrl_vendorreq_sync(udev, REALTEK_USB_VENQT_WRITE, wvalue, data, len); |
| 98 |
} |
| 99 |
|
| 100 |
static u8 _usb_read8_sync(struct rtl_priv *rtlpriv, u32 addr) |
| 101 |
{ |
| 102 |
return (u8)_usb_read_sync(rtlpriv, addr, 1); |
| 103 |
} |
| 104 |
|
| 105 |
static u16 _usb_read16_sync(struct rtl_priv *rtlpriv, u32 addr) |
| 106 |
{ |
| 107 |
return (u16)_usb_read_sync(rtlpriv, addr, 2); |
| 108 |
} |
| 109 |
|
| 110 |
static u32 _usb_read32_sync(struct rtl_priv *rtlpriv, u32 addr) |
| 111 |
{ |
| 112 |
return _usb_read_sync(rtlpriv, addr, 4); |
| 113 |
} |
| 114 |
|
| 115 |
static void _usb_write8_sync(struct rtl_priv *rtlpriv, u32 addr, u8 val) |
| 116 |
{ |
| 117 |
_usb_write_sync(rtlpriv, addr, val, 1); |
| 118 |
} |
| 119 |
|
| 120 |
static void _usb_write16_sync(struct rtl_priv *rtlpriv, u32 addr, u16 val) |
| 121 |
{ |
| 122 |
_usb_write_sync(rtlpriv, addr, val, 2); |
| 123 |
} |
| 124 |
|
| 125 |
static void _usb_write32_sync(struct rtl_priv *rtlpriv, u32 addr, u32 val) |
| 126 |
{ |
| 127 |
_usb_write_sync(rtlpriv, addr, val, 4); |
| 128 |
} |
| 129 |
|
| 130 |
static void _usb_write_chunk_sync(struct rtl_priv *rtlpriv, u32 addr, |
| 131 |
u32 length, u8 *data) |
| 132 |
{ |
| 133 |
struct usb_device *udev = to_usb_device(rtlpriv->io.dev); |
| 134 |
|
| 135 |
_usbctrl_vendorreq_sync(udev, REALTEK_USB_VENQT_WRITE, addr, data, length); |
| 136 |
} |
| 137 |
|
| 138 |
static void _rtl_usb_io_handler_init(struct device *dev, |
| 139 |
struct ieee80211_hw *hw) |
| 140 |
{ |
| 141 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 142 |
|
| 143 |
rtlpriv->io.dev = dev; |
| 144 |
mutex_init(&rtlpriv->io.bb_mutex); |
| 145 |
rtlpriv->io.write8 = _usb_write8_sync; |
| 146 |
rtlpriv->io.write16 = _usb_write16_sync; |
| 147 |
rtlpriv->io.write32 = _usb_write32_sync; |
| 148 |
rtlpriv->io.write_chunk = _usb_write_chunk_sync; |
| 149 |
rtlpriv->io.read8 = _usb_read8_sync; |
| 150 |
rtlpriv->io.read16 = _usb_read16_sync; |
| 151 |
rtlpriv->io.read32 = _usb_read32_sync; |
| 152 |
} |
| 153 |
|
| 154 |
static void _rtl_usb_io_handler_release(struct ieee80211_hw *hw) |
| 155 |
{ |
| 156 |
struct rtl_priv __maybe_unused *rtlpriv = rtl_priv(hw); |
| 157 |
|
| 158 |
mutex_destroy(&rtlpriv->io.bb_mutex); |
| 159 |
} |
| 160 |
|
| 161 |
/* Default aggregation handler. Do nothing and just return the oldest skb. */ |
| 162 |
static struct sk_buff *_none_usb_tx_aggregate_hdl(struct ieee80211_hw *hw, |
| 163 |
struct sk_buff_head *list) |
| 164 |
{ |
| 165 |
return skb_dequeue(list); |
| 166 |
} |
| 167 |
|
| 168 |
#define IS_HIGH_SPEED_USB(udev) \ |
| 169 |
((USB_SPEED_HIGH == (udev)->speed) ? true : false) |
| 170 |
|
| 171 |
static int _rtl_usb_init_tx(struct ieee80211_hw *hw) |
| 172 |
{ |
| 173 |
u32 i; |
| 174 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 175 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 176 |
|
| 177 |
rtlusb->max_bulk_out_size = IS_HIGH_SPEED_USB(rtlusb->udev) |
| 178 |
? USB_HIGH_SPEED_BULK_SIZE |
| 179 |
: USB_FULL_SPEED_BULK_SIZE; |
| 180 |
|
| 181 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "USB Max Bulk-out Size=%d\n", |
| 182 |
rtlusb->max_bulk_out_size); |
| 183 |
|
| 184 |
for (i = 0; i < __RTL_TXQ_NUM; i++) { |
| 185 |
u32 ep_num = rtlusb->ep_map.ep_mapping[i]; |
| 186 |
|
| 187 |
if (!ep_num) { |
| 188 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, |
| 189 |
"Invalid endpoint map setting!\n"); |
| 190 |
return -EINVAL; |
| 191 |
} |
| 192 |
} |
| 193 |
|
| 194 |
rtlusb->usb_tx_post_hdl = |
| 195 |
rtlpriv->cfg->usb_interface_cfg->usb_tx_post_hdl; |
| 196 |
rtlusb->usb_tx_cleanup = |
| 197 |
rtlpriv->cfg->usb_interface_cfg->usb_tx_cleanup; |
| 198 |
rtlusb->usb_tx_aggregate_hdl = |
| 199 |
(rtlpriv->cfg->usb_interface_cfg->usb_tx_aggregate_hdl) |
| 200 |
? rtlpriv->cfg->usb_interface_cfg->usb_tx_aggregate_hdl |
| 201 |
: &_none_usb_tx_aggregate_hdl; |
| 202 |
|
| 203 |
init_usb_anchor(&rtlusb->tx_submitted); |
| 204 |
for (i = 0; i < RTL_USB_MAX_EP_NUM; i++) { |
| 205 |
skb_queue_head_init(&rtlusb->tx_skb_queue[i]); |
| 206 |
init_usb_anchor(&rtlusb->tx_pending[i]); |
| 207 |
} |
| 208 |
return 0; |
| 209 |
} |
| 210 |
|
| 211 |
static void _rtl_rx_work(struct tasklet_struct *t); |
| 212 |
|
| 213 |
static int _rtl_usb_init_rx(struct ieee80211_hw *hw) |
| 214 |
{ |
| 215 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 216 |
struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw); |
| 217 |
struct rtl_usb *rtlusb = rtl_usbdev(usb_priv); |
| 218 |
|
| 219 |
rtlusb->rx_max_size = rtlpriv->cfg->usb_interface_cfg->rx_max_size; |
| 220 |
rtlusb->rx_urb_num = rtlpriv->cfg->usb_interface_cfg->rx_urb_num; |
| 221 |
rtlusb->usb_rx_hdl = rtlpriv->cfg->usb_interface_cfg->usb_rx_hdl; |
| 222 |
rtlusb->usb_rx_segregate_hdl = |
| 223 |
rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl; |
| 224 |
|
| 225 |
pr_info("rx_max_size %d, rx_urb_num %d, in_ep %d\n", |
| 226 |
rtlusb->rx_max_size, rtlusb->rx_urb_num, rtlusb->in_ep); |
| 227 |
init_usb_anchor(&rtlusb->rx_submitted); |
| 228 |
init_usb_anchor(&rtlusb->rx_cleanup_urbs); |
| 229 |
|
| 230 |
skb_queue_head_init(&rtlusb->rx_queue); |
| 231 |
tasklet_setup(&rtlusb->rx_work_tasklet, _rtl_rx_work); |
| 232 |
|
| 233 |
return 0; |
| 234 |
} |
| 235 |
|
| 236 |
static int _rtl_usb_init(struct ieee80211_hw *hw) |
| 237 |
{ |
| 238 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 239 |
struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw); |
| 240 |
struct rtl_usb *rtlusb = rtl_usbdev(usb_priv); |
| 241 |
int err; |
| 242 |
u8 epidx; |
| 243 |
struct usb_interface *usb_intf = rtlusb->intf; |
| 244 |
u8 epnums = usb_intf->cur_altsetting->desc.bNumEndpoints; |
| 245 |
|
| 246 |
rtlusb->out_ep_nums = rtlusb->in_ep_nums = 0; |
| 247 |
for (epidx = 0; epidx < epnums; epidx++) { |
| 248 |
struct usb_endpoint_descriptor *pep_desc; |
| 249 |
|
| 250 |
pep_desc = &usb_intf->cur_altsetting->endpoint[epidx].desc; |
| 251 |
|
| 252 |
if (usb_endpoint_dir_in(pep_desc)) { |
| 253 |
if (usb_endpoint_xfer_bulk(pep_desc)) { |
| 254 |
/* The vendor drivers assume there is only one |
| 255 |
* bulk in ep and that it's the first in ep. |
| 256 |
*/ |
| 257 |
if (rtlusb->in_ep_nums == 0) |
| 258 |
rtlusb->in_ep = usb_endpoint_num(pep_desc); |
| 259 |
else |
| 260 |
pr_warn("%s: bulk in endpoint is not the first in endpoint\n", |
| 261 |
__func__); |
| 262 |
} |
| 263 |
|
| 264 |
rtlusb->in_ep_nums++; |
| 265 |
} else if (usb_endpoint_dir_out(pep_desc)) { |
| 266 |
if (rtlusb->out_ep_nums < RTL_USB_MAX_BULKOUT_NUM) { |
| 267 |
if (usb_endpoint_xfer_bulk(pep_desc)) |
| 268 |
rtlusb->out_eps[rtlusb->out_ep_nums] = |
| 269 |
usb_endpoint_num(pep_desc); |
| 270 |
} else { |
| 271 |
pr_warn("%s: found more bulk out endpoints than the expected %d\n", |
| 272 |
__func__, RTL_USB_MAX_BULKOUT_NUM); |
| 273 |
} |
| 274 |
|
| 275 |
rtlusb->out_ep_nums++; |
| 276 |
} |
| 277 |
|
| 278 |
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, |
| 279 |
"USB EP(0x%02x), MaxPacketSize=%d, Interval=%d\n", |
| 280 |
pep_desc->bEndpointAddress, pep_desc->wMaxPacketSize, |
| 281 |
pep_desc->bInterval); |
| 282 |
} |
| 283 |
|
| 284 |
if (rtlusb->out_ep_nums == 0) { |
| 285 |
pr_err("No output end points found\n"); |
| 286 |
return -EINVAL; |
| 287 |
} |
| 288 |
/* usb endpoint mapping */ |
| 289 |
err = rtlpriv->cfg->usb_interface_cfg->usb_endpoint_mapping(hw); |
| 290 |
if (err) |
| 291 |
return err; |
| 292 |
|
| 293 |
rtlusb->usb_mq_to_hwq = rtlpriv->cfg->usb_interface_cfg->usb_mq_to_hwq; |
| 294 |
|
| 295 |
err = _rtl_usb_init_tx(hw); |
| 296 |
if (err) |
| 297 |
return err; |
| 298 |
|
| 299 |
err = _rtl_usb_init_rx(hw); |
| 300 |
if (err) |
| 301 |
goto err_out; |
| 302 |
|
| 303 |
return 0; |
| 304 |
|
| 305 |
err_out: |
| 306 |
_rtl_usb_cleanup_tx(hw); |
| 307 |
return err; |
| 308 |
} |
| 309 |
|
| 310 |
static void rtl_usb_init_sw(struct ieee80211_hw *hw) |
| 311 |
{ |
| 312 |
struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| 313 |
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| 314 |
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| 315 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 316 |
|
| 317 |
rtlhal->hw = hw; |
| 318 |
ppsc->inactiveps = false; |
| 319 |
ppsc->leisure_ps = false; |
| 320 |
ppsc->fwctrl_lps = false; |
| 321 |
ppsc->reg_fwctrl_lps = 3; |
| 322 |
ppsc->reg_max_lps_awakeintvl = 5; |
| 323 |
ppsc->fwctrl_psmode = FW_PS_DTIM_MODE; |
| 324 |
|
| 325 |
/* IBSS */ |
| 326 |
mac->beacon_interval = 100; |
| 327 |
|
| 328 |
/* AMPDU */ |
| 329 |
mac->min_space_cfg = 0; |
| 330 |
mac->max_mss_density = 0; |
| 331 |
|
| 332 |
/* set sane AMPDU defaults */ |
| 333 |
mac->current_ampdu_density = 7; |
| 334 |
mac->current_ampdu_factor = 3; |
| 335 |
|
| 336 |
/* QOS */ |
| 337 |
rtlusb->acm_method = EACMWAY2_SW; |
| 338 |
|
| 339 |
/* IRQ */ |
| 340 |
/* HIMR - turn all on */ |
| 341 |
rtlusb->irq_mask[0] = 0xFFFFFFFF; |
| 342 |
/* HIMR_EX - turn all on */ |
| 343 |
rtlusb->irq_mask[1] = 0xFFFFFFFF; |
| 344 |
rtlusb->disablehwsm = true; |
| 345 |
} |
| 346 |
|
| 347 |
static void _rtl_rx_completed(struct urb *urb); |
| 348 |
|
| 349 |
static int _rtl_prep_rx_urb(struct ieee80211_hw *hw, struct rtl_usb *rtlusb, |
| 350 |
struct urb *urb, gfp_t gfp_mask) |
| 351 |
{ |
| 352 |
void *buf; |
| 353 |
|
| 354 |
buf = usb_alloc_coherent(rtlusb->udev, rtlusb->rx_max_size, gfp_mask, |
| 355 |
&urb->transfer_dma); |
| 356 |
if (!buf) { |
| 357 |
pr_err("Failed to usb_alloc_coherent!!\n"); |
| 358 |
return -ENOMEM; |
| 359 |
} |
| 360 |
|
| 361 |
usb_fill_bulk_urb(urb, rtlusb->udev, |
| 362 |
usb_rcvbulkpipe(rtlusb->udev, rtlusb->in_ep), |
| 363 |
buf, rtlusb->rx_max_size, _rtl_rx_completed, rtlusb); |
| 364 |
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| 365 |
|
| 366 |
return 0; |
| 367 |
} |
| 368 |
|
| 369 |
static void _rtl_usb_rx_process_agg(struct ieee80211_hw *hw, |
| 370 |
struct sk_buff *skb) |
| 371 |
{ |
| 372 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 373 |
u8 *rxdesc = skb->data; |
| 374 |
struct ieee80211_hdr *hdr; |
| 375 |
bool unicast = false; |
| 376 |
__le16 fc; |
| 377 |
struct ieee80211_rx_status rx_status = {0}; |
| 378 |
struct rtl_stats stats = { |
| 379 |
.signal = 0, |
| 380 |
.rate = 0, |
| 381 |
}; |
| 382 |
|
| 383 |
skb_pull(skb, RTL_RX_DESC_SIZE); |
| 384 |
rtlpriv->cfg->ops->query_rx_desc(hw, &stats, &rx_status, rxdesc, skb); |
| 385 |
skb_pull(skb, (stats.rx_drvinfo_size + stats.rx_bufshift)); |
| 386 |
hdr = rtl_get_hdr(skb); |
| 387 |
fc = hdr->frame_control; |
| 388 |
if (!stats.crc) { |
| 389 |
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); |
| 390 |
|
| 391 |
if (is_broadcast_ether_addr(hdr->addr1)) { |
| 392 |
/*TODO*/; |
| 393 |
} else if (is_multicast_ether_addr(hdr->addr1)) { |
| 394 |
/*TODO*/ |
| 395 |
} else { |
| 396 |
unicast = true; |
| 397 |
rtlpriv->stats.rxbytesunicast += skb->len; |
| 398 |
} |
| 399 |
|
| 400 |
if (ieee80211_is_data(fc)) { |
| 401 |
rtlpriv->cfg->ops->led_control(hw, LED_CTL_RX); |
| 402 |
|
| 403 |
if (unicast) |
| 404 |
rtlpriv->link_info.num_rx_inperiod++; |
| 405 |
} |
| 406 |
/* static bcn for roaming */ |
| 407 |
rtl_beacon_statistic(hw, skb); |
| 408 |
} |
| 409 |
} |
| 410 |
|
| 411 |
static void _rtl_usb_rx_process_noagg(struct ieee80211_hw *hw, |
| 412 |
struct sk_buff *skb) |
| 413 |
{ |
| 414 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 415 |
u8 *rxdesc = skb->data; |
| 416 |
struct ieee80211_hdr *hdr; |
| 417 |
bool unicast = false; |
| 418 |
__le16 fc; |
| 419 |
struct ieee80211_rx_status rx_status = {0}; |
| 420 |
struct rtl_stats stats = { |
| 421 |
.signal = 0, |
| 422 |
.rate = 0, |
| 423 |
}; |
| 424 |
|
| 425 |
skb_pull(skb, RTL_RX_DESC_SIZE); |
| 426 |
rtlpriv->cfg->ops->query_rx_desc(hw, &stats, &rx_status, rxdesc, skb); |
| 427 |
skb_pull(skb, (stats.rx_drvinfo_size + stats.rx_bufshift)); |
| 428 |
hdr = rtl_get_hdr(skb); |
| 429 |
fc = hdr->frame_control; |
| 430 |
if (!stats.crc) { |
| 431 |
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); |
| 432 |
|
| 433 |
if (is_broadcast_ether_addr(hdr->addr1)) { |
| 434 |
/*TODO*/; |
| 435 |
} else if (is_multicast_ether_addr(hdr->addr1)) { |
| 436 |
/*TODO*/ |
| 437 |
} else { |
| 438 |
unicast = true; |
| 439 |
rtlpriv->stats.rxbytesunicast += skb->len; |
| 440 |
} |
| 441 |
|
| 442 |
if (ieee80211_is_data(fc)) { |
| 443 |
rtlpriv->cfg->ops->led_control(hw, LED_CTL_RX); |
| 444 |
|
| 445 |
if (unicast) |
| 446 |
rtlpriv->link_info.num_rx_inperiod++; |
| 447 |
} |
| 448 |
|
| 449 |
/* static bcn for roaming */ |
| 450 |
rtl_beacon_statistic(hw, skb); |
| 451 |
|
| 452 |
if (likely(rtl_action_proc(hw, skb, false))) |
| 453 |
ieee80211_rx(hw, skb); |
| 454 |
else |
| 455 |
dev_kfree_skb_any(skb); |
| 456 |
} else { |
| 457 |
dev_kfree_skb_any(skb); |
| 458 |
} |
| 459 |
} |
| 460 |
|
| 461 |
static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb) |
| 462 |
{ |
| 463 |
struct sk_buff *_skb; |
| 464 |
struct sk_buff_head rx_queue; |
| 465 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 466 |
|
| 467 |
skb_queue_head_init(&rx_queue); |
| 468 |
if (rtlusb->usb_rx_segregate_hdl) |
| 469 |
rtlusb->usb_rx_segregate_hdl(hw, skb, &rx_queue); |
| 470 |
WARN_ON(skb_queue_empty(&rx_queue)); |
| 471 |
while (!skb_queue_empty(&rx_queue)) { |
| 472 |
_skb = skb_dequeue(&rx_queue); |
| 473 |
_rtl_usb_rx_process_agg(hw, _skb); |
| 474 |
ieee80211_rx(hw, _skb); |
| 475 |
} |
| 476 |
} |
| 477 |
|
| 478 |
#define __RX_SKB_MAX_QUEUED 64 |
| 479 |
|
| 480 |
static void _rtl_rx_work(struct tasklet_struct *t) |
| 481 |
{ |
| 482 |
struct rtl_usb *rtlusb = from_tasklet(rtlusb, t, rx_work_tasklet); |
| 483 |
struct ieee80211_hw *hw = usb_get_intfdata(rtlusb->intf); |
| 484 |
struct sk_buff *skb; |
| 485 |
|
| 486 |
while ((skb = skb_dequeue(&rtlusb->rx_queue))) { |
| 487 |
if (unlikely(IS_USB_STOP(rtlusb))) { |
| 488 |
dev_kfree_skb_any(skb); |
| 489 |
continue; |
| 490 |
} |
| 491 |
|
| 492 |
if (likely(!rtlusb->usb_rx_segregate_hdl)) { |
| 493 |
_rtl_usb_rx_process_noagg(hw, skb); |
| 494 |
} else { |
| 495 |
/* TO DO */ |
| 496 |
_rtl_rx_pre_process(hw, skb); |
| 497 |
pr_err("rx agg not supported\n"); |
| 498 |
} |
| 499 |
} |
| 500 |
} |
| 501 |
|
| 502 |
static unsigned int _rtl_rx_get_padding(struct ieee80211_hdr *hdr, |
| 503 |
unsigned int len) |
| 504 |
{ |
| 505 |
#if NET_IP_ALIGN != 0 |
| 506 |
unsigned int padding = 0; |
| 507 |
#endif |
| 508 |
|
| 509 |
/* make function no-op when possible */ |
| 510 |
if (NET_IP_ALIGN == 0 || len < sizeof(*hdr)) |
| 511 |
return 0; |
| 512 |
|
| 513 |
#if NET_IP_ALIGN != 0 |
| 514 |
/* alignment calculation as in lbtf_rx() / carl9170_rx_copy_data() */ |
| 515 |
/* TODO: deduplicate common code, define helper function instead? */ |
| 516 |
|
| 517 |
if (ieee80211_is_data_qos(hdr->frame_control)) { |
| 518 |
u8 *qc = ieee80211_get_qos_ctl(hdr); |
| 519 |
|
| 520 |
padding ^= NET_IP_ALIGN; |
| 521 |
|
| 522 |
/* Input might be invalid, avoid accessing memory outside |
| 523 |
* the buffer. |
| 524 |
*/ |
| 525 |
if ((unsigned long)qc - (unsigned long)hdr < len && |
| 526 |
*qc & IEEE80211_QOS_CTL_A_MSDU_PRESENT) |
| 527 |
padding ^= NET_IP_ALIGN; |
| 528 |
} |
| 529 |
|
| 530 |
if (ieee80211_has_a4(hdr->frame_control)) |
| 531 |
padding ^= NET_IP_ALIGN; |
| 532 |
|
| 533 |
return padding; |
| 534 |
#endif |
| 535 |
} |
| 536 |
|
| 537 |
#define __RADIO_TAP_SIZE_RSV 32 |
| 538 |
|
| 539 |
static void _rtl_rx_completed(struct urb *_urb) |
| 540 |
{ |
| 541 |
struct rtl_usb *rtlusb = (struct rtl_usb *)_urb->context; |
| 542 |
int err = 0; |
| 543 |
|
| 544 |
if (unlikely(IS_USB_STOP(rtlusb))) |
| 545 |
goto free; |
| 546 |
|
| 547 |
if (likely(0 == _urb->status)) { |
| 548 |
unsigned int padding; |
| 549 |
struct sk_buff *skb; |
| 550 |
unsigned int qlen; |
| 551 |
unsigned int size = _urb->actual_length; |
| 552 |
struct ieee80211_hdr *hdr; |
| 553 |
|
| 554 |
if (size < RTL_RX_DESC_SIZE + sizeof(struct ieee80211_hdr)) { |
| 555 |
pr_err("Too short packet from bulk IN! (len: %d)\n", |
| 556 |
size); |
| 557 |
goto resubmit; |
| 558 |
} |
| 559 |
|
| 560 |
qlen = skb_queue_len(&rtlusb->rx_queue); |
| 561 |
if (qlen >= __RX_SKB_MAX_QUEUED) { |
| 562 |
pr_err("Pending RX skbuff queue full! (qlen: %d)\n", |
| 563 |
qlen); |
| 564 |
goto resubmit; |
| 565 |
} |
| 566 |
|
| 567 |
hdr = (void *)(_urb->transfer_buffer + RTL_RX_DESC_SIZE); |
| 568 |
padding = _rtl_rx_get_padding(hdr, size - RTL_RX_DESC_SIZE); |
| 569 |
|
| 570 |
skb = dev_alloc_skb(size + __RADIO_TAP_SIZE_RSV + padding); |
| 571 |
if (!skb) { |
| 572 |
pr_err("Can't allocate skb for bulk IN!\n"); |
| 573 |
goto resubmit; |
| 574 |
} |
| 575 |
|
| 576 |
_rtl_install_trx_info(rtlusb, skb, rtlusb->in_ep); |
| 577 |
|
| 578 |
/* Make sure the payload data is 4 byte aligned. */ |
| 579 |
skb_reserve(skb, padding); |
| 580 |
|
| 581 |
/* reserve some space for mac80211's radiotap */ |
| 582 |
skb_reserve(skb, __RADIO_TAP_SIZE_RSV); |
| 583 |
|
| 584 |
skb_put_data(skb, _urb->transfer_buffer, size); |
| 585 |
|
| 586 |
skb_queue_tail(&rtlusb->rx_queue, skb); |
| 587 |
tasklet_schedule(&rtlusb->rx_work_tasklet); |
| 588 |
|
| 589 |
goto resubmit; |
| 590 |
} |
| 591 |
|
| 592 |
switch (_urb->status) { |
| 593 |
/* disconnect */ |
| 594 |
case -ENOENT: |
| 595 |
case -ECONNRESET: |
| 596 |
case -ENODEV: |
| 597 |
case -ESHUTDOWN: |
| 598 |
goto free; |
| 599 |
default: |
| 600 |
break; |
| 601 |
} |
| 602 |
|
| 603 |
resubmit: |
| 604 |
usb_anchor_urb(_urb, &rtlusb->rx_submitted); |
| 605 |
err = usb_submit_urb(_urb, GFP_ATOMIC); |
| 606 |
if (unlikely(err)) { |
| 607 |
usb_unanchor_urb(_urb); |
| 608 |
goto free; |
| 609 |
} |
| 610 |
return; |
| 611 |
|
| 612 |
free: |
| 613 |
/* On some architectures, usb_free_coherent must not be called from |
| 614 |
* hardirq context. Queue urb to cleanup list. |
| 615 |
*/ |
| 616 |
usb_anchor_urb(_urb, &rtlusb->rx_cleanup_urbs); |
| 617 |
} |
| 618 |
|
| 619 |
#undef __RADIO_TAP_SIZE_RSV |
| 620 |
|
| 621 |
static void _rtl_usb_cleanup_rx(struct ieee80211_hw *hw) |
| 622 |
{ |
| 623 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 624 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 625 |
struct urb *urb; |
| 626 |
|
| 627 |
usb_kill_anchored_urbs(&rtlusb->rx_submitted); |
| 628 |
|
| 629 |
tasklet_kill(&rtlusb->rx_work_tasklet); |
| 630 |
cancel_work_sync(&rtlpriv->works.lps_change_work); |
| 631 |
|
| 632 |
skb_queue_purge(&rtlusb->rx_queue); |
| 633 |
|
| 634 |
while ((urb = usb_get_from_anchor(&rtlusb->rx_cleanup_urbs))) { |
| 635 |
usb_free_coherent(urb->dev, urb->transfer_buffer_length, |
| 636 |
urb->transfer_buffer, urb->transfer_dma); |
| 637 |
usb_free_urb(urb); |
| 638 |
} |
| 639 |
} |
| 640 |
|
| 641 |
static int _rtl_usb_receive(struct ieee80211_hw *hw) |
| 642 |
{ |
| 643 |
struct urb *urb; |
| 644 |
int err; |
| 645 |
int i; |
| 646 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 647 |
|
| 648 |
WARN_ON(0 == rtlusb->rx_urb_num); |
| 649 |
/* 1600 == 1514 + max WLAN header + rtk info */ |
| 650 |
WARN_ON(rtlusb->rx_max_size < 1600); |
| 651 |
|
| 652 |
for (i = 0; i < rtlusb->rx_urb_num; i++) { |
| 653 |
err = -ENOMEM; |
| 654 |
urb = usb_alloc_urb(0, GFP_KERNEL); |
| 655 |
if (!urb) |
| 656 |
goto err_out; |
| 657 |
|
| 658 |
err = _rtl_prep_rx_urb(hw, rtlusb, urb, GFP_KERNEL); |
| 659 |
if (err < 0) { |
| 660 |
pr_err("Failed to prep_rx_urb!!\n"); |
| 661 |
usb_free_urb(urb); |
| 662 |
goto err_out; |
| 663 |
} |
| 664 |
|
| 665 |
usb_anchor_urb(urb, &rtlusb->rx_submitted); |
| 666 |
err = usb_submit_urb(urb, GFP_KERNEL); |
| 667 |
if (err) { |
| 668 |
usb_unanchor_urb(urb); |
| 669 |
usb_free_urb(urb); |
| 670 |
goto err_out; |
| 671 |
} |
| 672 |
usb_free_urb(urb); |
| 673 |
} |
| 674 |
return 0; |
| 675 |
|
| 676 |
err_out: |
| 677 |
usb_kill_anchored_urbs(&rtlusb->rx_submitted); |
| 678 |
return err; |
| 679 |
} |
| 680 |
|
| 681 |
static int rtl_usb_start(struct ieee80211_hw *hw) |
| 682 |
{ |
| 683 |
int err; |
| 684 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 685 |
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| 686 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 687 |
|
| 688 |
err = rtlpriv->cfg->ops->hw_init(hw); |
| 689 |
if (!err) { |
| 690 |
rtl_init_rx_config(hw); |
| 691 |
|
| 692 |
/* Enable software */ |
| 693 |
SET_USB_START(rtlusb); |
| 694 |
/* should after adapter start and interrupt enable. */ |
| 695 |
set_hal_start(rtlhal); |
| 696 |
|
| 697 |
/* Start bulk IN */ |
| 698 |
err = _rtl_usb_receive(hw); |
| 699 |
} |
| 700 |
|
| 701 |
return err; |
| 702 |
} |
| 703 |
|
| 704 |
/*======================= tx =========================================*/ |
| 705 |
static void _rtl_usb_cleanup_tx(struct ieee80211_hw *hw) |
| 706 |
{ |
| 707 |
u32 i; |
| 708 |
struct sk_buff *_skb; |
| 709 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 710 |
struct ieee80211_tx_info *txinfo; |
| 711 |
|
| 712 |
for (i = 0; i < RTL_USB_MAX_EP_NUM; i++) { |
| 713 |
while ((_skb = skb_dequeue(&rtlusb->tx_skb_queue[i]))) { |
| 714 |
rtlusb->usb_tx_cleanup(hw, _skb); |
| 715 |
txinfo = IEEE80211_SKB_CB(_skb); |
| 716 |
ieee80211_tx_info_clear_status(txinfo); |
| 717 |
txinfo->flags |= IEEE80211_TX_STAT_ACK; |
| 718 |
ieee80211_tx_status_irqsafe(hw, _skb); |
| 719 |
} |
| 720 |
usb_kill_anchored_urbs(&rtlusb->tx_pending[i]); |
| 721 |
} |
| 722 |
usb_kill_anchored_urbs(&rtlusb->tx_submitted); |
| 723 |
} |
| 724 |
|
| 725 |
static void rtl_usb_cleanup(struct ieee80211_hw *hw) |
| 726 |
{ |
| 727 |
_rtl_usb_cleanup_rx(hw); |
| 728 |
_rtl_usb_cleanup_tx(hw); |
| 729 |
} |
| 730 |
|
| 731 |
/* We may add some struct into struct rtl_usb later. Do deinit here. */ |
| 732 |
static void rtl_usb_deinit(struct ieee80211_hw *hw) |
| 733 |
{ |
| 734 |
rtl_usb_cleanup(hw); |
| 735 |
} |
| 736 |
|
| 737 |
static void rtl_usb_stop(struct ieee80211_hw *hw) |
| 738 |
{ |
| 739 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 740 |
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| 741 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 742 |
struct urb *urb; |
| 743 |
|
| 744 |
/* should after adapter start and interrupt enable. */ |
| 745 |
set_hal_stop(rtlhal); |
| 746 |
cancel_work_sync(&rtlpriv->works.fill_h2c_cmd); |
| 747 |
/* Enable software */ |
| 748 |
SET_USB_STOP(rtlusb); |
| 749 |
|
| 750 |
/* free pre-allocated URBs from rtl_usb_start() */ |
| 751 |
usb_kill_anchored_urbs(&rtlusb->rx_submitted); |
| 752 |
|
| 753 |
tasklet_kill(&rtlusb->rx_work_tasklet); |
| 754 |
cancel_work_sync(&rtlpriv->works.lps_change_work); |
| 755 |
cancel_work_sync(&rtlpriv->works.update_beacon_work); |
| 756 |
|
| 757 |
flush_workqueue(rtlpriv->works.rtl_wq); |
| 758 |
|
| 759 |
skb_queue_purge(&rtlusb->rx_queue); |
| 760 |
|
| 761 |
while ((urb = usb_get_from_anchor(&rtlusb->rx_cleanup_urbs))) { |
| 762 |
usb_free_coherent(urb->dev, urb->transfer_buffer_length, |
| 763 |
urb->transfer_buffer, urb->transfer_dma); |
| 764 |
usb_free_urb(urb); |
| 765 |
} |
| 766 |
|
| 767 |
rtlpriv->cfg->ops->hw_disable(hw); |
| 768 |
} |
| 769 |
|
| 770 |
static void _rtl_submit_tx_urb(struct ieee80211_hw *hw, struct urb *_urb) |
| 771 |
{ |
| 772 |
int err; |
| 773 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 774 |
|
| 775 |
usb_anchor_urb(_urb, &rtlusb->tx_submitted); |
| 776 |
err = usb_submit_urb(_urb, GFP_ATOMIC); |
| 777 |
if (err < 0) { |
| 778 |
struct sk_buff *skb; |
| 779 |
|
| 780 |
pr_err("Failed to submit urb\n"); |
| 781 |
usb_unanchor_urb(_urb); |
| 782 |
skb = (struct sk_buff *)_urb->context; |
| 783 |
kfree_skb(skb); |
| 784 |
} |
| 785 |
usb_free_urb(_urb); |
| 786 |
} |
| 787 |
|
| 788 |
static int _usb_tx_post(struct ieee80211_hw *hw, struct urb *urb, |
| 789 |
struct sk_buff *skb) |
| 790 |
{ |
| 791 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 792 |
struct ieee80211_tx_info *txinfo; |
| 793 |
|
| 794 |
rtlusb->usb_tx_post_hdl(hw, urb, skb); |
| 795 |
skb_pull(skb, RTL_TX_HEADER_SIZE); |
| 796 |
txinfo = IEEE80211_SKB_CB(skb); |
| 797 |
ieee80211_tx_info_clear_status(txinfo); |
| 798 |
txinfo->flags |= IEEE80211_TX_STAT_ACK; |
| 799 |
|
| 800 |
if (urb->status) { |
| 801 |
pr_err("Urb has error status 0x%X\n", urb->status); |
| 802 |
goto out; |
| 803 |
} |
| 804 |
/* TODO: statistics */ |
| 805 |
out: |
| 806 |
ieee80211_tx_status_irqsafe(hw, skb); |
| 807 |
return urb->status; |
| 808 |
} |
| 809 |
|
| 810 |
static void _rtl_tx_complete(struct urb *urb) |
| 811 |
{ |
| 812 |
struct sk_buff *skb = (struct sk_buff *)urb->context; |
| 813 |
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 814 |
struct rtl_usb *rtlusb = (struct rtl_usb *)info->rate_driver_data[0]; |
| 815 |
struct ieee80211_hw *hw = usb_get_intfdata(rtlusb->intf); |
| 816 |
int err; |
| 817 |
|
| 818 |
if (unlikely(IS_USB_STOP(rtlusb))) |
| 819 |
return; |
| 820 |
err = _usb_tx_post(hw, urb, skb); |
| 821 |
if (err) { |
| 822 |
/* Ignore error and keep issuiing other urbs */ |
| 823 |
return; |
| 824 |
} |
| 825 |
} |
| 826 |
|
| 827 |
static struct urb *_rtl_usb_tx_urb_setup(struct ieee80211_hw *hw, |
| 828 |
struct sk_buff *skb, u32 ep_num) |
| 829 |
{ |
| 830 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 831 |
struct urb *_urb; |
| 832 |
|
| 833 |
WARN_ON(NULL == skb); |
| 834 |
_urb = usb_alloc_urb(0, GFP_ATOMIC); |
| 835 |
if (!_urb) |
| 836 |
return NULL; |
| 837 |
_rtl_install_trx_info(rtlusb, skb, ep_num); |
| 838 |
usb_fill_bulk_urb(_urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev, |
| 839 |
ep_num), skb->data, skb->len, _rtl_tx_complete, skb); |
| 840 |
_urb->transfer_flags |= URB_ZERO_PACKET; |
| 841 |
return _urb; |
| 842 |
} |
| 843 |
|
| 844 |
static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, |
| 845 |
enum rtl_txq qnum) |
| 846 |
{ |
| 847 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 848 |
u32 ep_num; |
| 849 |
struct urb *_urb = NULL; |
| 850 |
|
| 851 |
WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl); |
| 852 |
if (unlikely(IS_USB_STOP(rtlusb))) { |
| 853 |
pr_err("USB device is stopping...\n"); |
| 854 |
kfree_skb(skb); |
| 855 |
return; |
| 856 |
} |
| 857 |
ep_num = rtlusb->ep_map.ep_mapping[qnum]; |
| 858 |
_urb = _rtl_usb_tx_urb_setup(hw, skb, ep_num); |
| 859 |
if (unlikely(!_urb)) { |
| 860 |
pr_err("Can't allocate urb. Drop skb!\n"); |
| 861 |
kfree_skb(skb); |
| 862 |
return; |
| 863 |
} |
| 864 |
_rtl_submit_tx_urb(hw, _urb); |
| 865 |
} |
| 866 |
|
| 867 |
static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, |
| 868 |
struct ieee80211_sta *sta, |
| 869 |
struct sk_buff *skb, |
| 870 |
u16 hw_queue) |
| 871 |
{ |
| 872 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 873 |
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 874 |
struct rtl_tx_desc *pdesc = NULL; |
| 875 |
struct rtl_tcb_desc tcb_desc; |
| 876 |
struct ieee80211_hdr *hdr = rtl_get_hdr(skb); |
| 877 |
__le16 fc = hdr->frame_control; |
| 878 |
u8 *pda_addr = hdr->addr1; |
| 879 |
|
| 880 |
memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); |
| 881 |
if (ieee80211_is_auth(fc)) { |
| 882 |
rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n"); |
| 883 |
} |
| 884 |
|
| 885 |
if (rtlpriv->psc.sw_ps_enabled) { |
| 886 |
if (ieee80211_is_data(fc) && !ieee80211_is_nullfunc(fc) && |
| 887 |
!ieee80211_has_pm(fc)) |
| 888 |
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); |
| 889 |
} |
| 890 |
|
| 891 |
rtl_action_proc(hw, skb, true); |
| 892 |
if (is_multicast_ether_addr(pda_addr)) |
| 893 |
rtlpriv->stats.txbytesmulticast += skb->len; |
| 894 |
else if (is_broadcast_ether_addr(pda_addr)) |
| 895 |
rtlpriv->stats.txbytesbroadcast += skb->len; |
| 896 |
else |
| 897 |
rtlpriv->stats.txbytesunicast += skb->len; |
| 898 |
rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, NULL, info, sta, skb, |
| 899 |
hw_queue, &tcb_desc); |
| 900 |
if (ieee80211_is_data(fc)) |
| 901 |
rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX); |
| 902 |
} |
| 903 |
|
| 904 |
static int rtl_usb_tx(struct ieee80211_hw *hw, |
| 905 |
struct ieee80211_sta *sta, |
| 906 |
struct sk_buff *skb, |
| 907 |
struct rtl_tcb_desc *dummy) |
| 908 |
{ |
| 909 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 910 |
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| 911 |
struct ieee80211_hdr *hdr = rtl_get_hdr(skb); |
| 912 |
__le16 fc = hdr->frame_control; |
| 913 |
u16 hw_queue; |
| 914 |
|
| 915 |
if (unlikely(is_hal_stop(rtlhal))) |
| 916 |
goto err_free; |
| 917 |
hw_queue = rtlusb->usb_mq_to_hwq(fc, skb_get_queue_mapping(skb)); |
| 918 |
_rtl_usb_tx_preprocess(hw, sta, skb, hw_queue); |
| 919 |
_rtl_usb_transmit(hw, skb, hw_queue); |
| 920 |
return NETDEV_TX_OK; |
| 921 |
|
| 922 |
err_free: |
| 923 |
dev_kfree_skb_any(skb); |
| 924 |
return NETDEV_TX_OK; |
| 925 |
} |
| 926 |
|
| 927 |
static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw, |
| 928 |
struct ieee80211_sta *sta, |
| 929 |
struct sk_buff *skb) |
| 930 |
{ |
| 931 |
return false; |
| 932 |
} |
| 933 |
|
| 934 |
static void rtl_fill_h2c_cmd_work_callback(struct work_struct *work) |
| 935 |
{ |
| 936 |
struct rtl_works *rtlworks = |
| 937 |
container_of(work, struct rtl_works, fill_h2c_cmd); |
| 938 |
struct ieee80211_hw *hw = rtlworks->hw; |
| 939 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 940 |
|
| 941 |
rtlpriv->cfg->ops->fill_h2c_cmd(hw, H2C_RA_MASK, 5, rtlpriv->rate_mask); |
| 942 |
} |
| 943 |
|
| 944 |
static const struct rtl_intf_ops rtl_usb_ops = { |
| 945 |
.adapter_start = rtl_usb_start, |
| 946 |
.adapter_stop = rtl_usb_stop, |
| 947 |
.adapter_tx = rtl_usb_tx, |
| 948 |
.waitq_insert = rtl_usb_tx_chk_waitq_insert, |
| 949 |
}; |
| 950 |
|
| 951 |
int rtl_usb_probe(struct usb_interface *intf, |
| 952 |
const struct usb_device_id *id, |
| 953 |
const struct rtl_hal_cfg *rtl_hal_cfg) |
| 954 |
{ |
| 955 |
int err; |
| 956 |
struct ieee80211_hw *hw = NULL; |
| 957 |
struct rtl_priv *rtlpriv = NULL; |
| 958 |
struct usb_device *udev; |
| 959 |
struct rtl_usb_priv *usb_priv; |
| 960 |
|
| 961 |
hw = ieee80211_alloc_hw(sizeof(struct rtl_priv) + |
| 962 |
sizeof(struct rtl_usb_priv), &rtl_ops); |
| 963 |
if (!hw) { |
| 964 |
pr_warn("rtl_usb: ieee80211 alloc failed\n"); |
| 965 |
return -ENOMEM; |
| 966 |
} |
| 967 |
rtlpriv = hw->priv; |
| 968 |
rtlpriv->hw = hw; |
| 969 |
rtlpriv->usb_data = kcalloc(RTL_USB_MAX_RX_COUNT, sizeof(u32), |
| 970 |
GFP_KERNEL); |
| 971 |
if (!rtlpriv->usb_data) { |
| 972 |
ieee80211_free_hw(hw); |
| 973 |
return -ENOMEM; |
| 974 |
} |
| 975 |
|
| 976 |
/* this spin lock must be initialized early */ |
| 977 |
spin_lock_init(&rtlpriv->locks.usb_lock); |
| 978 |
INIT_WORK(&rtlpriv->works.fill_h2c_cmd, |
| 979 |
rtl_fill_h2c_cmd_work_callback); |
| 980 |
INIT_WORK(&rtlpriv->works.lps_change_work, |
| 981 |
rtl_lps_change_work_callback); |
| 982 |
INIT_WORK(&rtlpriv->works.update_beacon_work, |
| 983 |
rtl_update_beacon_work_callback); |
| 984 |
|
| 985 |
rtlpriv->usb_data_index = 0; |
| 986 |
init_completion(&rtlpriv->firmware_loading_complete); |
| 987 |
SET_IEEE80211_DEV(hw, &intf->dev); |
| 988 |
udev = interface_to_usbdev(intf); |
| 989 |
usb_get_dev(udev); |
| 990 |
usb_priv = rtl_usbpriv(hw); |
| 991 |
memset(usb_priv, 0, sizeof(*usb_priv)); |
| 992 |
usb_priv->dev.intf = intf; |
| 993 |
usb_priv->dev.udev = udev; |
| 994 |
usb_set_intfdata(intf, hw); |
| 995 |
/* For dual MAC RTL8192DU, which has two interfaces. */ |
| 996 |
rtlpriv->rtlhal.interfaceindex = |
| 997 |
intf->altsetting[0].desc.bInterfaceNumber; |
| 998 |
/* init cfg & intf_ops */ |
| 999 |
rtlpriv->rtlhal.interface = INTF_USB; |
| 1000 |
rtlpriv->cfg = rtl_hal_cfg; |
| 1001 |
rtlpriv->intf_ops = &rtl_usb_ops; |
| 1002 |
/* Init IO handler */ |
| 1003 |
_rtl_usb_io_handler_init(&udev->dev, hw); |
| 1004 |
rtlpriv->cfg->ops->read_chip_version(hw); |
| 1005 |
/*like read eeprom and so on */ |
| 1006 |
rtlpriv->cfg->ops->read_eeprom_info(hw); |
| 1007 |
err = _rtl_usb_init(hw); |
| 1008 |
if (err) |
| 1009 |
goto error_out2; |
| 1010 |
rtl_usb_init_sw(hw); |
| 1011 |
/* Init mac80211 sw */ |
| 1012 |
err = rtl_init_core(hw); |
| 1013 |
if (err) { |
| 1014 |
pr_err("Can't allocate sw for mac80211\n"); |
| 1015 |
goto error_out2; |
| 1016 |
} |
| 1017 |
if (rtlpriv->cfg->ops->init_sw_vars(hw)) { |
| 1018 |
pr_err("Can't init_sw_vars\n"); |
| 1019 |
goto error_out; |
| 1020 |
} |
| 1021 |
rtl_init_sw_leds(hw); |
| 1022 |
|
| 1023 |
err = ieee80211_register_hw(hw); |
| 1024 |
if (err) { |
| 1025 |
pr_err("Can't register mac80211 hw.\n"); |
| 1026 |
goto error_init_vars; |
| 1027 |
} |
| 1028 |
rtlpriv->mac80211.mac80211_registered = 1; |
| 1029 |
|
| 1030 |
set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status); |
| 1031 |
return 0; |
| 1032 |
|
| 1033 |
error_init_vars: |
| 1034 |
wait_for_completion(&rtlpriv->firmware_loading_complete); |
| 1035 |
rtlpriv->cfg->ops->deinit_sw_vars(hw); |
| 1036 |
error_out: |
| 1037 |
rtl_usb_deinit(hw); |
| 1038 |
rtl_deinit_core(hw); |
| 1039 |
error_out2: |
| 1040 |
_rtl_usb_io_handler_release(hw); |
| 1041 |
usb_put_dev(udev); |
| 1042 |
kfree(rtlpriv->usb_data); |
| 1043 |
ieee80211_free_hw(hw); |
| 1044 |
return -ENODEV; |
| 1045 |
} |
| 1046 |
EXPORT_SYMBOL(rtl_usb_probe); |
| 1047 |
|
| 1048 |
void rtl_usb_disconnect(struct usb_interface *intf) |
| 1049 |
{ |
| 1050 |
struct ieee80211_hw *hw = usb_get_intfdata(intf); |
| 1051 |
struct rtl_priv *rtlpriv = rtl_priv(hw); |
| 1052 |
struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw)); |
| 1053 |
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| 1054 |
|
| 1055 |
if (unlikely(!rtlpriv)) |
| 1056 |
return; |
| 1057 |
/* just in case driver is removed before firmware callback */ |
| 1058 |
wait_for_completion(&rtlpriv->firmware_loading_complete); |
| 1059 |
clear_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status); |
| 1060 |
/*ieee80211_unregister_hw will call ops_stop */ |
| 1061 |
if (rtlmac->mac80211_registered == 1) { |
| 1062 |
ieee80211_unregister_hw(hw); |
| 1063 |
rtlmac->mac80211_registered = 0; |
| 1064 |
} else { |
| 1065 |
rtl_deinit_deferred_work(hw, false); |
| 1066 |
rtlpriv->intf_ops->adapter_stop(hw); |
| 1067 |
} |
| 1068 |
/*deinit rfkill */ |
| 1069 |
/* rtl_deinit_rfkill(hw); */ |
| 1070 |
rtl_usb_deinit(hw); |
| 1071 |
rtl_deinit_core(hw); |
| 1072 |
kfree(rtlpriv->usb_data); |
| 1073 |
rtlpriv->cfg->ops->deinit_sw_vars(hw); |
| 1074 |
_rtl_usb_io_handler_release(hw); |
| 1075 |
usb_put_dev(rtlusb->udev); |
| 1076 |
usb_set_intfdata(intf, NULL); |
| 1077 |
ieee80211_free_hw(hw); |
| 1078 |
} |
| 1079 |
EXPORT_SYMBOL(rtl_usb_disconnect); |