| 1 |
/* SPDX-License-Identifier: GPL-2.0 */ |
| 2 |
/* Copyright(c) 2009-2012 Realtek Corporation.*/ |
| 3 |
|
| 4 |
#ifndef __RTL_USB_H__ |
| 5 |
#define __RTL_USB_H__ |
| 6 |
|
| 7 |
#include <linux/skbuff.h> |
| 8 |
|
| 9 |
#define RTL_RX_DESC_SIZE 24 |
| 10 |
|
| 11 |
#define RTL_USB_DEVICE(vend, prod, cfg) \ |
| 12 |
.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ |
| 13 |
.idVendor = (vend), \ |
| 14 |
.idProduct = (prod), \ |
| 15 |
.driver_info = (kernel_ulong_t)&(cfg) |
| 16 |
|
| 17 |
#define USB_HIGH_SPEED_BULK_SIZE 512 |
| 18 |
#define USB_FULL_SPEED_BULK_SIZE 64 |
| 19 |
|
| 20 |
#define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */ |
| 21 |
#define RTL_USB_MAX_EP_NUM 6 /* max ep number */ |
| 22 |
#define RTL_USB_MAX_BULKOUT_NUM 4 |
| 23 |
#define RTL_USB_MAX_TX_URBS_NUM 8 |
| 24 |
|
| 25 |
enum rtl_txq { |
| 26 |
/* These definitions shall be consistent with value |
| 27 |
* returned by skb_get_queue_mapping |
| 28 |
*------------------------------------*/ |
| 29 |
RTL_TXQ_BK, |
| 30 |
RTL_TXQ_BE, |
| 31 |
RTL_TXQ_VI, |
| 32 |
RTL_TXQ_VO, |
| 33 |
/*------------------------------------*/ |
| 34 |
RTL_TXQ_BCN, |
| 35 |
RTL_TXQ_MGT, |
| 36 |
RTL_TXQ_HI, |
| 37 |
|
| 38 |
/* Must be last */ |
| 39 |
__RTL_TXQ_NUM, |
| 40 |
}; |
| 41 |
|
| 42 |
struct rtl_ep_map { |
| 43 |
u32 ep_mapping[__RTL_TXQ_NUM]; |
| 44 |
}; |
| 45 |
|
| 46 |
struct _trx_info { |
| 47 |
struct rtl_usb *rtlusb; |
| 48 |
u32 ep_num; |
| 49 |
}; |
| 50 |
|
| 51 |
static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb, |
| 52 |
struct sk_buff *skb, |
| 53 |
u32 ep_num) |
| 54 |
{ |
| 55 |
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| 56 |
|
| 57 |
info->rate_driver_data[0] = rtlusb; |
| 58 |
info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num; |
| 59 |
} |
| 60 |
|
| 61 |
/* Add suspend/resume later */ |
| 62 |
enum rtl_usb_state { |
| 63 |
USB_STATE_STOP = 0, |
| 64 |
USB_STATE_START = 1, |
| 65 |
}; |
| 66 |
|
| 67 |
#define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state) |
| 68 |
#define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state) |
| 69 |
#define SET_USB_STOP(rtlusb_ptr) \ |
| 70 |
do { \ |
| 71 |
(rtlusb_ptr)->state = USB_STATE_STOP; \ |
| 72 |
} while (0) |
| 73 |
|
| 74 |
#define SET_USB_START(rtlusb_ptr) \ |
| 75 |
do { \ |
| 76 |
(rtlusb_ptr)->state = USB_STATE_START; \ |
| 77 |
} while (0) |
| 78 |
|
| 79 |
struct rtl_usb { |
| 80 |
struct usb_device *udev; |
| 81 |
struct usb_interface *intf; |
| 82 |
enum rtl_usb_state state; |
| 83 |
|
| 84 |
/* Bcn control register setting */ |
| 85 |
u32 reg_bcn_ctrl_val; |
| 86 |
/* for 88/92cu card disable */ |
| 87 |
u8 disablehwsm; |
| 88 |
/*QOS & EDCA */ |
| 89 |
enum acm_method acm_method; |
| 90 |
/* irq . HIMR,HIMR_EX */ |
| 91 |
u32 irq_mask[2]; |
| 92 |
bool irq_enabled; |
| 93 |
|
| 94 |
u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index); |
| 95 |
|
| 96 |
/* Tx */ |
| 97 |
u8 out_ep_nums ; |
| 98 |
u8 out_eps[RTL_USB_MAX_BULKOUT_NUM]; |
| 99 |
u8 out_queue_sel; |
| 100 |
struct rtl_ep_map ep_map; |
| 101 |
|
| 102 |
u32 max_bulk_out_size; |
| 103 |
u32 tx_submitted_urbs; |
| 104 |
struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM]; |
| 105 |
|
| 106 |
struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM]; |
| 107 |
struct usb_anchor tx_submitted; |
| 108 |
|
| 109 |
struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *, |
| 110 |
struct sk_buff_head *); |
| 111 |
int (*usb_tx_post_hdl)(struct ieee80211_hw *, |
| 112 |
struct urb *, struct sk_buff *); |
| 113 |
void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *); |
| 114 |
|
| 115 |
/* Rx */ |
| 116 |
u8 in_ep_nums; |
| 117 |
u32 in_ep; /* Bulk IN endpoint number */ |
| 118 |
u32 rx_max_size; /* Bulk IN max buffer size */ |
| 119 |
u32 rx_urb_num; /* How many Bulk INs are submitted to host. */ |
| 120 |
struct usb_anchor rx_submitted; |
| 121 |
struct usb_anchor rx_cleanup_urbs; |
| 122 |
struct tasklet_struct rx_work_tasklet; |
| 123 |
struct sk_buff_head rx_queue; |
| 124 |
void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *, |
| 125 |
struct sk_buff_head *); |
| 126 |
void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *); |
| 127 |
}; |
| 128 |
|
| 129 |
struct rtl_usb_priv { |
| 130 |
struct bt_coexist_info bt_coexist; |
| 131 |
struct rtl_usb dev; |
| 132 |
}; |
| 133 |
|
| 134 |
#define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv)) |
| 135 |
#define rtl_usbdev(usbpriv) (&((usbpriv)->dev)) |
| 136 |
|
| 137 |
int rtl_usb_probe(struct usb_interface *intf, |
| 138 |
const struct usb_device_id *id, |
| 139 |
const struct rtl_hal_cfg *rtl92cu_hal_cfg); |
| 140 |
void rtl_usb_disconnect(struct usb_interface *intf); |
| 141 |
|
| 142 |
#endif |